Electrical technician jobs in New Brunswick, New JerseyCreate job alerts

Job DescriptionBenefits/Perks • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service PTAC heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • Past experience as an HVAC service technician or comparable education, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 poundsBilingual a plus+

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance Benefits/Perks • Flexible Scheduling, • Competitive Compensation, • Career Advancement OpportunitiesJob Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiring, • Complete service tickets/reports on each and every job.Qualifications:, • Past experience as an HVAC service technician or comparable education, • Valid Drivers License, • EPA Certification, • Experience with operation and maintenance of boilers, heat pumps, air handlers, and geothermal systems, • Commercial and residential experience preferred, • Ability to climb ladders, crawl, and lift 40 pounds

Job Description Position SummaryThe Industrial Refrigeration Technician is responsible for ensuring the safe, reliable, and efficient operation of industrial refrigeration systems and related equipment. This position performs preventive and corrective maintenance, troubleshooting, inspections, and repairs to support continuous production, food safety, equipment reliability, and regulatory compliance.The ideal candidate has hands-on experience with industrial refrigeration systems and a strong understanding of mechanical, electrical, and control systems within a manufacturing environment.Key ResponsibilitiesPerform routine inspections of industrial refrigeration systems and associated equipment to ensure safe and reliable operation.Perform scheduled preventive maintenance (PM) and corrective maintenance on refrigeration equipment.Troubleshoot, diagnose, and repair compressors, condensers, evaporators, valves, pumps, piping, controls, and related components.Monitor system temperatures, pressures, refrigerant levels, and other operating parameters to identify abnormal conditions and prevent equipment failures.Inspect and verify proper operation of cold rooms, freezers, refrigeration equipment, and HVAC systems.Identify refrigerant leaks and take appropriate corrective action in accordance with established safety and environmental procedures.Troubleshoot mechanical, electrical, and control-related issues affecting refrigeration system performance.Complete work orders and accurately document maintenance activities, repairs, inspections, and equipment conditions.Respond to refrigeration equipment breakdowns and emergency maintenance situations in a timely manner to minimize production downtime.Coordinate maintenance and repair activities with external vendors, contractors, and internal departments as needed.Support continuous improvement, equipment reliability, and energy-efficiency initiatives.Maintain technical documentation, equipment records, and maintenance history.Follow all company safety, quality, food safety, environmental, and regulatory requirements.Maintain a clean and safe work environment and follow established lockout/tagout and other applicable safety procedures.QualificationsRequired:Technical degree, diploma, or certification in Refrigeration Systems, HVAC, Industrial Maintenance, Electromechanics, or a related technical field.Minimum 2–3 years of hands-on experience maintaining industrial refrigeration systems.Strong mechanical and electrical troubleshooting skills.Ability to read and interpret electrical diagrams, mechanical drawings, blueprints, and technical schematics.Ability to work independently and respond effectively to equipment failures and emergency situations.Preferred:Experience with industrial refrigeration systems utilizing ammonia (NH3), CO₂, and/or fluorinated refrigerants.Refrigerant handling certification, as required by applicable regulations.Experience working within a food manufacturing or other regulated manufacturing environment.Experience with PLC-controlled equipment and automation systems.Familiarity with SCADA and refrigeration monitoring/control systems.Technical KnowledgeIndustrial refrigeration systems and componentsCompressors, condensers, evaporators, pumps, valves, and piping systemsElectrical and mechanical troubleshootingRefrigeration controls and instrumentationPreventive and corrective maintenancePLC and automation systemsSCADA and equipment monitoring systemsHVAC systemsRefrigerant leak detection and responseIndustrial safety and environmental requirementsMaintenance documentation and work-order systemsCore CompetenciesStrong troubleshooting and problem-solving skillsSafety-focused mindsetMechanical and technical aptitudeAttention to detailEffective communication and teamworkPlanning and organizational skillsSense of urgency and ability to respond to equipment breakdownsAbility to prioritize work in a fast-paced manufacturing environmentKey Performance Indicators (KPIs)Performance may be measured based on:Response time to equipment failuresRefrigeration system availability and reliabilityPreventive maintenance completion and complianceReduction of unplanned equipment downtimeMaintenance quality and recurring failure reductionSafety, environmental, and regulatory audit resultsRefrigeration system energy efficiency and consumption#EuroUrgent #EuroHigh

Job DescriptionBenefits: • 401(k) matching, • Health insurance, • Paid time off Benefits/Perks • Year-round, full-time employment – no seasonal layoffs, • No sales quotas, • Medical benefits, • Retirement plan with Company Matching, • Paid holidays and vacation, • Ongoing manufacturer and technical training, • Competitive pay based on experience, • Opportunities for advancement., • Family-oriented work environment where your contributions are recognized and appreciated, • Limited to no required overtime, on-call, evenings or weekendsJob Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will service, repair and perform seasonal maintenance on heating and air conditioning systems in residences or commercial establishments. Responsibilities: • Diagnose, troubleshoot, repair, and maintain residential heating and air conditioning systems., • Perform preventative maintenance on furnaces, air conditioners, heat pumps, mini-splits, boilers, and indoor air quality equipment., • Install replacement parts and complete minor system repairs., • Explain findings and repair options to customers in a professional, easy-to-understand manner., • Maintain accurate service records and communicate with our office team., • Respond to service calls efficiently while providing outstanding customer service., • Follow all company safety standards and industry best practices.Qualifications:, • Preferred: 5+ years of residential HVAC service experience (strong candidates with less experience and a willingness to learn are encouraged to apply)., • Strong mechanical aptitude with the ability to diagnose problems efficiently., • Excellent troubleshooting and critical thinking skills., • A fast learner who enjoys expanding their technical knowledge., • Friendly, professional demeanor with outstanding customer service and communication skills., • Ability to work independently while also contributing to a team environment., • Familiarity with electrical controls, wiring diagrams, and HVAC diagnostic equipment., • Valid driver's license with a clean driving record., • EPA Certification preferred (or ability to obtain)., • Ability to climb ladders, crawl, and lift 40 pounds.

Job Description Advance Your Career in Heating & Cooling — Join Pezz Heating & Cooling as an HVAC Service Technician in Central New Jersey Position Title: HVAC Service Technician Company Name: Pezz Heating & Cooling Pay Range: $35 – $42+ per hour (based on experience) Employment Type: Full-Time Location: 14 Ilene Ct, Bldg 11 Unit 6, Hillsborough, NJ 08844 Industry: HVAC / Mechanical (Residential & Light Commercial) Job Overview Pezz Heating & Cooling is seeking a skilled and experienced HVAC Service Technician to join our growing team in Central New Jersey. In this role, you will diagnose, repair, maintain, and install residential and light-commercial heating and air conditioning systems, ensuring reliable comfort for our customers year-round. This is a hands-on opportunity for a technician who thrives in the field, takes pride in solving complex HVAC issues, and values delivering high-quality service. If you’re looking for consistent work, strong team support, and long-term growth in the HVAC industry, this is the role for you. Who We Are Pezz Heating & Cooling is a trusted provider of residential and light-commercial HVAC services across Central New Jersey. Backed by the strength and reputation of a well-established service organization, we focus on delivering expert heating and cooling solutions with professionalism and precision. Our team is built on craftsmanship, accountability, and continuous improvement. We invest in our technicians with modern tools, training, and support to help you grow your HVAC career while delivering exceptional service to our customers. Learn more about us at: www.pezzelectric.com Key Responsibilities • HVAC Service & Diagnostics, • Diagnose, repair, and maintain residential and light-commercial HVAC systems, • Service furnaces, air conditioners, heat pumps, air handlers, boilers, mini-splits, and RTUs, • Perform system performance testing and identify efficiency or safety issues, • Installation & Maintenance, • Install HVAC equipment and components in accordance with code and company standards, • Perform seasonal tune-ups and preventative maintenance on heating and cooling systems, • Interpret system layouts, schematics, and installation requirements, • Customer Communication, • Communicate clearly with customers about system issues, repair options, and recommendations, • Provide professional, customer-focused service on every job, • Document work performed, findings, and recommendations accurately, • Operational Excellence, • Maintain a clean, safe, and organized work environment, • Follow all company safety standards and procedures, • Represent Pezz Heating & Cooling professionally at all job sites Qualifications • 5+ years of HVAC service and installation experience (residential and light commercial), • Strong diagnostic and troubleshooting skills across heating and cooling systems, • Experience working with furnaces, condensers, heat pumps, boilers, mini-splits, and RTUs, • EPA certification preferred, • Excellent communication and customer service skills, • Strong mechanical aptitude and problem-solving ability, • Valid driver’s license with a clean driving record Benefits • Health & Wellness, • Medical, Dental & Vision Insurance, • Health Savings Account (HSA), • Wellness Reimbursements, • Safety Equipment Provided, • Compensation & Retirement, • $35 – $42+ per hour (based on experience), • Weekly pay cycle, • Retirement savings program, • Profit sharing opportunities, • Time Off & Balance, • Paid Time Off: Holidays, Vacation, and Sick Days, • Career Development, • Paid HVAC training and certifications, • Apprenticeship and mentorship programs, • Company-provided tech package (smartphone/tablet), • Additional Perks, • Company vehicle and uniforms provided, • Team events and company culture initiatives Schedule • Full-Time, • Monday–Friday, • Overtime available Work Location • Field-based role servicing residential and light-commercial customers, • Coverage area: Central New Jersey (Hillsborough and surrounding regions) Equal Employment Opportunity (EEO) Statement We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. Join a company that’s as dedicated to your future as you are to your craft—apply now and grow with Pezz Electrical Service LLC.

Job Description Residential HVAC Technician (Oil Certified) Binsky Home Service – Somerset, NJ Who We Are At Binsky Home Service, we’ve been keeping homes comfortable for over 80 years. As a trusted name in residential HVAC, plumbing, electrical, and drain services across Central New Jersey, we take pride in delivering five-star service through integrity, craftsmanship, and care. When our customers say, “I got a guy — Binsky is my guy,” we know we’ve done our job right. The Role We’re looking for a skilled Residential HVAC Technician with oil service experience to join our growing team. This individual will diagnose, service, and repair residential heating and cooling systems — with a special emphasis on oil-fired furnaces, boilers, and burners. The ideal candidate takes pride in their work, provides exceptional customer experiences, and thrives in a supportive, family-like culture. What You’ll Do • Diagnose and repair residential heating and cooling systems (oil, gas, and electric)., • Perform oil burner cleanings, tune-ups, and safety inspections., • Troubleshoot and replace components such as motors, igniters, pumps, and controls., • Perform annual maintenance and efficiency checks on oil-fired boilers and furnaces., • Present repair or replacement options with honesty and professionalism., • Maintain detailed records of service calls in ServiceTitan., • Uphold Binsky Home Service’s commitment to safety, quality, and customer satisfaction., • Participate in ongoing training to stay current on best practices and new technologies., • Support teammates and contribute to a positive, high-performance environment. What You Bring • EPA Universal Certification (Required), • Oil Burner Technician Certification or equivalent field experience (Required), • Minimum 3 years of residential HVAC experience (oil systems preferred), • Working knowledge of combustion analysis, flue venting, and fuel delivery systems, • Valid driver’s license with a clean driving record, • Excellent communication and customer service skills, • Ability to work independently and maintain professionalism in customer homes Why You’ll Love Working Here • Competitive hourly pay + incentives and spiffs, • Year-round, steady work — no seasonal layoffs, • Fully stocked company vehicle, iPad, and uniforms, • Paid time off, holidays, and health benefits (medical, dental, vision, life insurance), • 401(k) with company match, • Ongoing technical and soft-skill training, • Career advancement opportunities — we promote from within, • A supportive team environment where your success matters

Job Description HVAC Maintenance Technician Are you a skilled HVAC Maintenance Technician looking to join a company with a strong legacy and commitment to employee growth? Join a trusted plumbing, electrical, heating, and air conditioning company with over 55 years of experience serving the community. We're currently seeking a dedicated HVAC Maintenance Technician to diagnose and maintain residential HVAC systems while providing exceptional customer service. What We Offer: Earn competitive wages ranging upward to $35/hr Benefits Include major medical, prescription drug, optical, dental, orthodontia, long-term disability, and life insurance. 401-K with Match with company match. Access 100+ hours of training every year. Participate in events like ball games, comedy clubs, dinners, awards, and more every quarter. Company-provided uniforms. Provide Stability - We have over 55 years in business. Work with a fun, professional, and caring management team. As we expand, so do the opportunities for career advancement. Take pride in working for a company that makes a positive difference in the community. Responsibilities of the HVAC Maintenance Technician: • Perform regular maintenance and inspections of HVAC systems, including checking for wear and tear, cleaning, and testing equipment functionality., • Replace or clean filters, lubricate parts, and clean air ducts as needed., • Diagnose and troubleshoot minor issues and perform necessary repairs to keep systems running efficiently., • Ensure that HVAC systems are compliant with local safety codes and regulations., • Record and document all service and maintenance activities, including any parts used and recommendations for future service., • Respond to maintenance calls and provide efficient solutions to any HVAC-related issues., • Advise customers on energy-saving tips and system performance improvements., • Maintain a clean and safe work environment, ensuring all tools and equipment are properly stored and maintained., • Communicate effectively with clients, management, and other team members. Requirements for the HVAC Maintenance Technician: • High school diploma or equivalent (HVAC certification or training is a plus)., • Proven experience as an HVAC Maintenance Technician or in a similar role., • Strong knowledge of HVAC systems, components, and maintenance procedures., • Ability to troubleshoot and repair HVAC equipment., • Familiarity with HVAC codes and regulations., • Excellent communication and customer service skills., • Ability to lift heavy equipment and work in various environments., • Valid driver's license and reliable transportation., • Strong problem-solving skills and attention to detail., • Ability to work independently and as part of a team. If you're passionate about being part of a dynamic team that's shaping the future of HVAC services, then we want to hear from you! Don't miss this opportunity to join an industry-leading legacy. Apply now and let's take your HVAC career to new heights together! We are an Equal Opportunity Employer and do not discriminate based on race, color, religion, sex, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law. We encourage applications from all qualified individuals. #HX100

Job DescriptionCarvana Diesel Technician: Join Our Fleet Maintenance Team! Join our rapidly growing team at Carvana, where we're revolutionizing the car buying experience! We're seeking a skilled and dedicated Diesel Technician to join our innovative Fleet Maintenance team. If you're a problem-solver who enjoys working on Class 8 trucks and trailers and is passionate about vehicle uptime, we want to hear from you. Why You'll Love Working Here We're proud to offer our team members a supportive, collaborative environment and outstanding benefits. • Competitive Pay & Benefits:, • Competitive hourly compensation and overtime opportunities, • Comprehensive medical, dental, and vision coverage, • Matching 401k, • PTO: Accrue 104 hours in your first year!, • Tool Allowance: Receive a $500 annual tool allowance to keep your equipment up-to-date., • Boot Allowance: Get a $100 boot allowance every 6 months to ensure you have the right gear., • Investments in Your Future:, • ASE certification reimbursement (we cover the cost!), • Tuition reimbursement and student loan repayment programs, • Opportunities for growth and advancement within a rapidly expanding company, • Internal training, including classroom time for DTNA ARC Certification, • Unique Perks:, • Carvana employee discount on vehicle purchases, • Pet benefits and much more! $2000-$4000 Sign on Bonus! A Day in the Life: What You'll Be Doing As a Diesel Technician, you'll be a key part of our Fleet Maintenance team, ensuring our Class 8 fleet is safe and reliable. Our fleet is primarily day cabs and trailers, all under manufacturer warranty—meaning no major engine overhauls or roadside calls. You'll perform a variety of tasks, with clear pathways for growth: • Routine Maintenance & Repair: Perform preventative maintenance, inspections, and component replacements on our fleet., • Diagnostics: Utilize diagnostic tools and software to troubleshoot complex electrical, engine, and transmission problems., • System Repairs: Address issues with aftertreatment systems (DEF/emissions), perform regens, and change filters., • Collaborate & Optimize: Work with your team to maintain accurate records, optimize vehicle performance, and minimize downtime., • Safety First: Adhere to all safety protocols and industry best practices to ensure our fleet is always DOT compliant.What We're Looking For We're searching for skilled professionals with a strong background in diesel technology. • Experience: 3+ years of experience with Heavy-Duty Class 8 trucks and trailers or similar equipment (e.g., agricultural, construction, waste collection truck)., • Technical Skills:, • Strong diagnostic and troubleshooting skills for diesel engines, transmissions, and vehicle systems., • Proficiency with diagnostic software and using a laptop for manuals., • Experience with aftertreatment systems and electrical diagnostics., • Comfortable with MIG welding is a plus., • Certifications & Training:, • A minimum of two ASE Certifications within the first 6 months of employment (we'll reimburse you!)., • T-series ASE Certifications are highly valued., • Requirements:, • A valid Driver's License with clean driving record, • Ability to perform physical tasks associated with vehicle maintenance (lifting, bending, etc.)., • Strong attention to detail and a commitment to quality workmanship., • A solid attendance record and punctuality are essential for this role.About Carvana At Carvana, we're on a mission to change the way people buy cars. We're a technology company bringing transparency and convenience to the car buying process. We believe in putting the customer first and fostering a culture of innovation and collaboration. Our team members are our greatest asset, and we're committed to providing a workplace where everyone can thrive. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check and drug test. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Pay: $37.00 - $45.00 per hour Schedule: Mon-Fri 7 am-4:30 pm Job description: Job Summary We are seeking a highly skilled and dedicated Diesel Truck Mechanic to join our maintenance team. The ideal candidate will possess extensive experience in diagnosing, repairing, and maintaining diesel-powered trucks and heavy equipment. This role requires a strong mechanical aptitude, proficiency with automotive diagnostics, and the ability to perform complex repairs on various vehicle systems. The Diesel Truck Mechanic will ensure that fleet vehicles and equipment operate safely, efficiently, and reliably, supporting our commitment to operational excellence. Duties • Perform comprehensive diagnostics and repairs on diesel truck engines, transmissions, brakes, suspensions, hydraulics, and electrical systems using schematics and specialized tools., • Conduct preventive maintenance tasks including oil changes, tire services, alignment, and fluid replacements to maximize vehicle lifespan and safety., • Fabricate parts or components as needed using welding, soldering, and fabrication techniques to meet repair specifications., • Utilize power tools and hand tools effectively for assembly, disassembly, repairs, and modifications of vehicle components., • Maintain detailed records of repairs performed and parts used in accordance with company policies., • Assist with heavy lifting tasks and operate heavy machinery safely during maintenance procedures., • Follow safety protocols diligently while working with air brakes, hydraulics, HVAC systems, shocks & struts, and other complex systems. Skills • Proven experience working in a dealership environment or similar automotive service setting with a focus on diesel trucks., • Strong mechanical knowledge of diesel engines, transmissions, brake systems, suspension components, and HVAC systems., • Ability to read and interpret schematics for electrical wiring diagrams and hydraulic systems., • Skilled in fabrication techniques including welding and soldering for custom repairs or modifications., • Proficiency with automotive diagnostics tools and service technician experience to identify issues efficiently., • Familiarity with heavy equipment operation such as excavators or forklifts is advantageous., • Excellent problem-solving skills combined with customer service orientation to communicate effectively with clients or team members. Benefits: • 401(k), • Flexible schedule, • Health insurance, • Paid time off

Job DescriptionBenefits: • 401(k), • Employee discounts, • Health insurance RESIDENTIAL HVAC TECHNICIAN NEW VISION ELECTRIC, LLC - EAST BRUNSWICK, NJ Full Time/Medical Benefits Pay: $40,000 - $90,000 Annually HVAC / Electrical company seeking a professional, responsible and reliable HVAC tech with a minimum of 3 years’ experience in Residential and Commercial HVAC Repair maintenance and installation. An individual, who is energetic, enthusiastic, a team player and always willing to learn, a “let’s get the job done” attitude will open great opportunities. Responsibilities: • Knowledge in HVAC controls systems – at all levels & capacities, • Maintenance, repairs and/or replacements, • Install full HVAC systems in compliance with local regulations, • Troubleshooting using testing, measuring and diagnostics instruments., • Gets the job done in a timely and safe manner., • Outstanding communication with customers, supervisors and fellow staff., • Documents service/installation actions., • Participates in educational opportunities/training to keep skills up with the trade.This is a great opportunity for a candidate that is eager and interested in professional growth. We are an equal opportunity place of employment. "Great opportunity to be part of a team, a family, working with the owner" Job Type: Full-time Benefits: • Health insurance

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Competitive salary, • Free uniforms, • Opportunity for advancement, • Paid time off, • Training & development Benefits/Perks • Competitive Compensation, • Career Advancement Opportunities, • The company provides reliable trucks, NJ Ez Pass, Fuel Card, uniforms, iPads, • PTO and Sick Hours PlanJob Summary: We seek skilled and experienced HVAC Technicians to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residential or commercial establishments. You have 15+ years of experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and taking pride in completing customer jobs with quality and efficiency. A positive attitude is a must! Responsibilities: • Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, custom ducts, or refilling non-toxic refrigerants, • Establish customer rapport to ensure the highest levels of satisfaction, • Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution, • Test electrical circuits or components for continuity, using electrical test equipment, • Repair or replace defective equipment, components, or wiringQualifications:, • Experience with 15+ years as an HVAC service technician or comparable education, • Valid Drivers License with good standing and clean records in the past 5 years, • EPA Certification, • Experience with operation and maintenance of chillers, rooftop units, heat pumps, air handlers, and geothermal systems, • Ability to climb ladders, crawl, and lift 40 pounds, • Availability to work overtime and on weekends for serious emergency calls, • Must be NJ resident and live within 25 miles radius of zip code 08816

Job Description Overview: We are seeking an experienced and highly skilled Automotive Technician A/B (Tech A/B) to join our team. As a Senior-Level Technician, you will handle advanced diagnostics, major repairs, and contribute to the overall excellence of our shop. You’ll also mentor less experienced technicians if needed and help maintain the high service standards that our customers expect. Responsibilities: • Perform complex diagnostics and mechanical/electrical repairs on all kinds of vehicle systems, including engines, transmissions, brakes, HVAC, and electronics., • Use OEM and third-party diagnostic software and scan tools to troubleshoot issues accurately., • Conduct test drives and/or inspections to verify repairs and ensure quality workmanship., • Maintain clear, thorough documentation of all work performed., • Ensure all work is performed in compliance with safety protocols and shop standards. Qualifications: • ASE Master Certification, • Minimum 7 to 10+ years of automotive repair experience in a professional setting., • Proficiency with diagnostic tools, service software, and repair procedures., • Valid driver’s license with a clean driving record., • Ability to lift up to 50 lbs and perform physically demanding tasks., • Strong attention to detail, professionalism, and a commitment to high-quality work and project delivery within requested time frame., • Willingness to take a Drug Test and/or Background Check if requested. Compensation & Benefits: • Salary: $100,000+ annually, depending on experience., • Comprehensive benefits package, including:, • Health, dental, and vision insurance, • 401(k) with employer match, • Paid time off and holidays, • Competitive, performance-based pay structure\nCompany Description Really good automotive shop with high rating and always busy. Really good automotive shop with high rating and always busy.

Job DescriptionCarvana Diesel Technician: Join Our Fleet Maintenance Team! Join our rapidly growing team at Carvana, where we're revolutionizing the car buying experience! We're seeking a skilled and dedicated Diesel Technician to join our innovative Fleet Maintenance team. If you're a problem-solver who enjoys working on Class 8 trucks and trailers and is passionate about vehicle uptime, we want to hear from you. Why You'll Love Working Here We're proud to offer our team members a supportive, collaborative environment and outstanding benefits. • Competitive Pay & Benefits:, • Competitive hourly compensation and overtime opportunities, • Comprehensive medical, dental, and vision coverage, • Matching 401k, • PTO: Accrue 104 hours in your first year!, • Tool Allowance: Receive a $500 annual tool allowance to keep your equipment up-to-date., • Boot Allowance: Get a $100 boot allowance every 6 months to ensure you have the right gear., • Investments in Your Future:, • ASE certification reimbursement (we cover the cost!), • Tuition reimbursement and student loan repayment programs, • Opportunities for growth and advancement within a rapidly expanding company, • Internal training, including classroom time for DTNA ARC Certification, • Unique Perks:, • Carvana employee discount on vehicle purchases, • Pet benefits and much more! $2000-$4000 Sign on Bonus! A Day in the Life: What You'll Be Doing As a Diesel Technician, you'll be a key part of our Fleet Maintenance team, ensuring our Class 8 fleet is safe and reliable. Our fleet is primarily day cabs and trailers, all under manufacturer warranty—meaning no major engine overhauls or roadside calls. You'll perform a variety of tasks, with clear pathways for growth: • Routine Maintenance & Repair: Perform preventative maintenance, inspections, and component replacements on our fleet., • Diagnostics: Utilize diagnostic tools and software to troubleshoot complex electrical, engine, and transmission problems., • System Repairs: Address issues with aftertreatment systems (DEF/emissions), perform regens, and change filters., • Collaborate & Optimize: Work with your team to maintain accurate records, optimize vehicle performance, and minimize downtime., • Safety First: Adhere to all safety protocols and industry best practices to ensure our fleet is always DOT compliant.What We're Looking For We're searching for skilled professionals with a strong background in diesel technology. • Experience: 3+ years of experience with Heavy-Duty Class 8 trucks and trailers or similar equipment (e.g., agricultural, construction, waste collection truck)., • Technical Skills:, • Strong diagnostic and troubleshooting skills for diesel engines, transmissions, and vehicle systems., • Proficiency with diagnostic software and using a laptop for manuals., • Experience with aftertreatment systems and electrical diagnostics., • Comfortable with MIG welding is a plus., • Certifications & Training:, • A minimum of two ASE Certifications within the first 6 months of employment (we'll reimburse you!)., • T-series ASE Certifications are highly valued., • Requirements:, • A valid Driver's License with clean driving record, • Ability to perform physical tasks associated with vehicle maintenance (lifting, bending, etc.)., • Strong attention to detail and a commitment to quality workmanship., • A solid attendance record and punctuality are essential for this role.About Carvana At Carvana, we're on a mission to change the way people buy cars. We're a technology company bringing transparency and convenience to the car buying process. We believe in putting the customer first and fostering a culture of innovation and collaboration. Our team members are our greatest asset, and we're committed to providing a workplace where everyone can thrive. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check and drug test. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Are you a Certified HVAC/Refrigeration Technician looking for a place to build your career - not just another job? We are looking a Journey Level Refrigeration Technician for full-time, year-round commercial service work in and around the Edison, NJ area. Looking for the right job is tough. Come join us, and you won't need to look again! We are seeking career-minded techs who are ready to start their last job and enjoy the work/life balance we offer for years to come! With full benefits, paid holiday/sick/vacation time, room for growth, and team that has your back, this is the place for you! Apply now! RESPONSIBILITIES: · Maintain, diagnose, and repair multiple types of refrigeration systems, as well as all mechanical and electrical components related to the equipment (such as self-contained coolers and freezers, single and rack systems, etc.) · Perform minor plumbing repairs on refrigeration equipment, including walk-in drain lines, case drain lines, cooling towers and water-cooled condensers · Inspect plumbing, electrical, and refrigeration systems and identifying specifications that are required · Perform preventative maintenance and repairs for HVAC and Refrigeration · Collaborate directly with grocery store managers and store directors · Quote equipment repairs and recommend replacement when necessary · Maintain proper van stock, tools and safety equipment on work van SKILLS: · Good judgement for use of supplies and materials in refrigeration repairs · Attention to detail and critical analysis for diagnostics and work performed · Professional communication skills · Mechanical aptitude QUALIFICATIONS: · 2+ years prior HVAC/R experience · Be available for ON CALL work as needed · Ability to pass a physical/drug screen/background investigation/ driving abstract as needed BONUS POINTS: · Universal EPA License • Electrical License · 2-3 years of grocery refrigeration / HVAC experience · Related education/certification in HVAC and refrigeration industry It's time you take the first step into your last job! If you're done wasting time in the wrong place, apply now!

Job DescriptionBenefits: • Free uniforms, • Opportunity for advancement, • Paid time off, • Training & development Join Our Team of HVAC Service Pros Today! We are seeking a skilled and motivated HVAC Installer to join our team. This position involves installing, maintaining, and repairing heating, ventilation, and air conditioning systems across residential, commercial, and industrial settings. The ideal candidate will possess strong mechanical knowledge, experience with HVAC/R systems, and the ability to interpret schematics and design plans. This role offers an excellent opportunity for individuals who desire to advance their careers in a dynamic environment. DUTIES • Install new HVAC systems including air conditioning units, boilers, and refrigeration equipment according to manufacturer specifications and schematics, • Perform maintenance and repairs on existing HVAC systems, ensuring optimal operation and energy efficiency, • Read and interpret technical schematics, HVAC design plans, and electrical diagrams to accurately execute installations, • Troubleshoot system issues using tools such as ohmmeters and other diagnostic equipment, • Conduct equipment repair and replacement tasks involving welding, mechanical repairs, or component upgrades, • Assist with plumbing connections related to HVAC systems and ensure compliance with safety standards, • Perform service technician duties including system testing, calibration, and ensuring proper airflow and refrigerant levels, • Maintain a clean and safe work environment adhering to safety protocols at all times, • Operate field service vehicles safely while transporting tools and equipment to various job sitesREQUIREMENTS, • Minimum of 3 years experience in installation and/or service technician roles involving HVAC systems, • Knowledge of HVAC design principles, schematics interpretation, and mechanical systems troubleshooting, • Hands-on experience with commercial refrigeration units, • Familiarity with plumbing connections associated with HVAC installations, • Experience working with air conditioning systems, • Ability to operate diagnostic tools including ohmmeters and other electrical testing devices, • Prior field service experience in HVAC installation or maintenance is highly desirable, • Valid driver’s license required for travel between job sites and clean driving record, • High school diploma or equivalent, • NATE certification preferred, • Must display strong communication skills and technical competence, • Ability to pass a thorough background check and drug screenThis role is ideal for individuals passionate about mechanical systems with a strong work ethic who are eager to grow their expertise within the HVAC industry. Job Types: Full-time Benefits • Paid time off, • Uniforms Provided, • Training and Development, • Growth OpportunitiesWork Location: In person

Job Description Job Title: Diesel Technician Job Description We are seeking a skilled Diesel Technician to work on with Volvo/Prevost buses. The ideal candidate will possess mechanical aptitude and experience in maintenance and repair, with a focus on troubleshooting and preventive maintenance. Responsibilities • Remove and replace or repair seats on Volvo/Prevost buses., • Use OEM software and diagnostic platforms to troubleshoot complex coach systems., • Run diagnostic tests to identify issues and repair engines, electrical systems, air conditioning, steering, and braking systems. Shift: 1st shift (7-3:30) for 3-6 Months of training, then you will transition to 3-11:30 Essential Skills • Mechanical aptitude is required., • Experience with hand tools is essential., • Ability to troubleshoot and perform preventive maintenance. Additional Skills & Qualifications • Must have own tools. Why Work Here? Join a company that offers a dynamic work environment, focusing on innovative solutions and technical expertise. Employees are valued for their skills and provided with opportunities to work with advanced technologies. Work Environment This position involves working on Volvo/Prevost buses using OEM software and diagnostic platforms. The role requires hands-on engagement with mechanical systems, demanding proficiency with hand tools. Employees are expected to provide their own tools for the job. Job Type & Location This is a Contract to Hire position based out of South Plainfield, NJ. Pay and Benefits The pay range for this position is $22.00 - $26.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Oct 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Position Description Ryder is hiring a Senior Level Diesel Technician in South Plainfield, NJ— providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T3 • Hourly Pay: $35.00 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday Weekends OFF, • Hours: First Shift 6:00 am – 2:30 pm We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Misty or text “South Plainfield” to904-869-3515to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Basic diagnostics and repairs, including AC and electrical systems, required, • Three (3) years or more relevant work experience, preferred, • All other certification as required by location, required, • Valid Commercial Driver License (CDL) CLASS A,preferred, • All other certification as required by location, required, • ADDITIONAL REQUIREMENTS:, • Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc., • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties including:, • Performs standard vehicle maintenance, • Performs preventive maintenance, • Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable, • Completes complex and detailed mechanical inspections & repairs with minimal supervision, • Replaces defective components as instructed, • Works unsupervised on most tasks, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task., • Utilizes key functions of Shop Management System and electronic documentation available., • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)., • Acts as mentor for Tech 1 and Tech 2 levels., • Demonstrate the ability to access and use internal and external maintenance documents., • Other support duties as required to support operations. These could include but are not limited to Service Island support, • SBTIII trained within 180 days (SBT220), • Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days) Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 4 days ago (9/25/2026 5:08 PM) Requisition ID 2026-211806 Location (Posting Location) : State/Province NJ Location (Posting Location) : City SOUTH PLAINFIELD Location (Posting Location) : Postal Code 07080 Category Technicians/Service Employees5 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000356 Min Pay USD $35.00/Hr. Max Pay USD $35.00/Hr.

Job Description Low voltage installer We are currently searching for Low Voltage technicians with at least 2 plus years of experience in a commercial environment, more experience is great. Candidates are encouraged to apply ASAP as we have an immediate need for projects in Edison and in Rutherford areas. Qualified candidates will send an updated resume for consideration. Interviews are currently underway. Please apply today by calling/texting David W 6 4 6 8 6 2 3 9 9 3 Cable Technician Duties: · Pulling and routing CAT 6a or CAT 6 cable in a new construction commercial environment · Terminating phone jacks and dressing and terminating distribution frames (66 or 110 blocks, patch panels) · Installing support structures (ladders, racks, j-hooks) • Fire Alarm installation / pulling Qualifications: · Familiarity with BICSI, EIA, TIA, or NEC Standards · Experience running or bending conduit, with digital multi-meters, and testing cable · Troubleshooting networking issues · Rack and stack work, closet work, putting together server racks, patch panels · Fiber experience including Anaerobic Terminations, SC and LC Connectors, and Splicing · Ability to read and understand schematic and line diagrams · Your own basic telecom tools including punch downs, snips, wire strippers, cordless drill, PPE (safety gear), etc. Compensation: · Option to enroll in Medical, Dental, Vision, and Life Insurance · Pay $20- $32 hr plus depending on experience- programing devices and splicing fiber/ lead tech is a plus · Weekly Pay · Referral Bonuses of up to $250 for referrals that result in a placement (Ask for details!) \nCompany Description Crewforce specializes in placing low voltage and electrical talent across the nation and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status. Crewforce specializes in placing low voltage and electrical talent across the nation and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status.

Job DescriptionBenefits/Perks • Year-round, full-time employment – no seasonal layoffs, • No sales quotas, • Medical benefits, • Retirement plan with Company Matching, • Paid holidays and vacation, • Ongoing manufacturer and technical training, • Competitive pay based on experience, • Opportunities for advancement., • Family-oriented work environment where your contributions are recognized and appreciated, • Limited to no required overtime, on-call, evenings or weekendsJob Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will service, repair and perform seasonal maintenance on heating and air conditioning systems in residences or commercial establishments. Responsibilities: • Diagnose, troubleshoot, repair, and maintain residential heating and air conditioning systems., • Perform preventative maintenance on furnaces, air conditioners, heat pumps, mini-splits, boilers, and indoor air quality equipment., • Install replacement parts and complete minor system repairs., • Explain findings and repair options to customers in a professional, easy-to-understand manner., • Maintain accurate service records and communicate with our office team., • Respond to service calls efficiently while providing outstanding customer service., • Follow all company safety standards and industry best practices.Qualifications:, • Preferred: 5+ years of residential HVAC service experience (strong candidates with less experience and a willingness to learn are encouraged to apply)., • Strong mechanical aptitude with the ability to diagnose problems efficiently., • Excellent troubleshooting and critical thinking skills., • A fast learner who enjoys expanding their technical knowledge., • Friendly, professional demeanor with outstanding customer service and communication skills., • Ability to work independently while also contributing to a team environment., • Familiarity with electrical controls, wiring diagrams, and HVAC diagnostic equipment., • Valid driver's license with a clean driving record., • EPA Certification preferred (or ability to obtain)., • Ability to climb ladders, crawl, and lift 40 pounds.

Job Description Pay Range: $22-$35 hourly We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairs—from light maintenance to heavy engine work—and diagnostics on our vehicles, including: • Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work., • Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles., • Completing repairs for wheel bearings and axles, as well as vehicle climate control systems including ACs and heater cores. At Carvana, you'll receive a competitive wage and amazing perks – including but not limited to: 100% company paid healthcare, dental & vision insurance, a 401(k with a Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers. • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires We also have a variety of other automotive roles available across our Inspection Center network. Check out our Careers site to learn more! General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English

Job Description Pay Range: $22-$35 hourly We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairs—from light maintenance to heavy engine work—and diagnostics on our vehicles, including: • Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work., • Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles., • Completing repairs for wheel bearings and axles, as well as vehicle climate control systems including ACs and heater cores. At Carvana, you'll receive a competitive wage and amazing perks – including but not limited to: 100% company paid healthcare, dental & vision insurance, a 401(k with a Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers. • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires We also have a variety of other automotive roles available across our Inspection Center network. Check out our Careers site to learn more! General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English

Job Description Pay Range: $22-$35 hourly We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairs—from light maintenance to heavy engine work—and diagnostics on our vehicles, including: • Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work., • Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles., • Completing repairs for wheel bearings and axles, as well as vehicle climate control systems including ACs and heater cores. At Carvana, you'll receive a competitive wage and amazing perks – including but not limited to: 100% company paid healthcare, dental & vision insurance, a 401(k with a Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Schedule: We do everything we can to deliver an exceptional customer experience, and that includes delivering great vehicles when expected. If we're in a pinch, mandatory overtime is one way in which we can follow-through on this commitment to our customers. We're looking for team players who are all in on our mission and are able to work mandatory overtime based on our business needs. How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers. • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires We also have a variety of other automotive roles available across our Inspection Center network. Check out our Careers site to learn more! General qualifications and requirements • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English

Job DescriptionAutomotive Technician A Level or Master Tech Acura or Honda Exp a PLUS!Join a Premier Service Team and Advance Your Automotive Career Are you passionate about automotive technology and precision workmanship? We're seeking skilled Automotive Technicians to join our service team. This is an opportunity to work with industry-leading engineering, advanced diagnostic systems, and a dealership committed to excellence in customer satisfaction. What You'll Do • Diagnose, maintain, and repair vehicles to manufacturer standards, • Perform routine maintenance, inspections, and warranty repairs, • Utilize advanced diagnostic equipment and repair procedures, • Complete work efficiently while maintaining the highest quality standards, • Accurately document repair orders and vehicle findings, • Collaborate with service advisors and fellow technicians, • Stay current on technical training and certifications, • Ensure a safe and organized work environmentWhat We're Looking For, • Previous automotive technician experience preferred, • ASE, or manufacturer certifications are a plus, • Strong diagnostic and troubleshooting skills, • Knowledge of electrical, mechanical, and computerized vehicle systems, • Ability to work independently and as part of a team, • Strong attention to detail and commitment to quality, • Valid driver's license with a clean driving recordWhat We Offer, • Competitive compensation and performance incentives, • Paid manufacturer training and certification opportunities, • Modern facility with advanced diagnostic equipment, • Health, dental, and vision benefits (Master Techs $39.00 for all), • Paid time off and holidays, • Retirement savings plan, • Employee vehicle purchase and service discounts, • Career growth opportunities within a premier dealership groupWhy Join Us? Work with some of the world's most innovative automotive brands while developing your technical expertise in a supportive, professional environment. If you're committed to quality repairs and exceptional customer service, we'd love to hear from you. Apply today and drive your technician career forward! Powered by JazzHR IiWpwkRAuR

Job Description All American Ford is looking for skilled Commercial Vehicle Automotive Technician to grow within our reputable dealership. We are also excited to announce that we have a fully air conditioned shop! This position has the compensation of $35 - $52 hourly. Responsibilities: • Able to diagnose and repair automotive systems including engines, steering, brakes, suspension, transmission, air conditioning, etc., • Completes service and repair assignments efficiently, safely and correct to pass quality inspections., • Comply with company safety policies and procedures., • Communicate directly with service advisors regarding the status of service work., • Continuously learn new technical information and techniques. Benefits: • Flat-rate pay with an abundance of bonus opportunities, • Medical & dental benefits, • Paid holidays, • Paid vacation, • Sick time, • 401(k), • Employee pricing & discount benefits, • Air conditioned shop, • Tool assistance, • Paid training, • No Sundays, • A professional & respectful work environment Qualifications • 2+ years of Service Technician experience preferred, • High school diploma or equivalent, ASE Certification required, • Ford Certification, • Previous experience at a Ford dealership is preferred, • A level qualifications, including Diagnostic, Electrical and Engine Repair, • Dexterity, requiring a steady hand, excellent hand-eye coordination, • Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment, • Excellent customer service skills and basic computer competencies, • Positive, friendly attitude, along with an eagerness to improve, • Enjoy working in a dynamic environment, • Teammate with ability to collaborate with others effectively, • Ability to learn new technology, repair and service procedures and specifications, • Must have valid license, • Must have a clean Motor Vehicle Record, • Ability to pass background check required There are opportunities for growth and long term careers here at All American Ford. Please apply for further details. We look forward to hearing from you!

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools, • Perform services, diagnostics, and repairs in a timely fashion while communicating with the shop foreman and service advisor to promote an optimal customer experience All potential employment opportunities presented and advertised within this site are with independently owned and operated Kia Retailers. Applicants who seek employment through this site are applying for full-time employment with a participating Kia Retailer and not with KUS or ERS. All employment opportunities listed within this site are subject to applicable Federal and State statutes, rules, and regulations governing employment, which apply to each individual Kia Retailer’s specific location. KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required, • Must be willing to complete and pass drug screening and background checks Benefits Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job DescriptionElectrical Service Technician - No On CallWe are looking for highly technical, professional, residential service technicians who love to help people live in greater safety and comfort. The essential function of the Electrical Service Technician is to provide general electrical repair and services to Gold Medal's customers. This position handles service calls to customers in their homes and utilizes customer service training to educate and assist customers in choosing service, products and finance options.ResponsibilitiesTroubleshoot, diagnose, install and repair electrical components in a residential environmentProvide excellent customer serviceMaintain proper stock, parts, tools, and safety equipment in the vehicleTravel to job sites in service area, and work with dispatcher to ensure schedule is maintained and delays are properly communicated to customerObtain customer authorization/signature for payment (or financing) at completion of jobMeeting predetermined targets and sales goalsAssist customers in evaluating repair vs. replace optionsAssist in generating and scheduling replacement consultations (as indicated)Meet or exceed performance minimum standardsJob Requirementsyears' electrician experienceMust be willing to pursue, develop and participate in continuing education.Experienced in residential service preferred but not required.Knowledge of local electrical codes and ability to apply them in a practical manner on each job.Must be able to work with inspectors, suppliers and co-workers to ensure correct project work, while abiding by all codes.Ability to draw simple diagrams and can read blue prints and other diagrams.Possess and maintain a valid and clean driver's license.Must be able to lift up to 100 pounds.Why join our team?Ability to make over $100,000 a year!Plenty of advancement opportunitiesHighly competitive benefits packageFull-time, year-round work schedule401k company matchPaid vacations AND birthdaysHoliday PayKlein hand tools & Hammer DrillsWe live by our core value "Great place to work -- All for one and one for all!"Come work with us and not for us. Only motivated people should apply.''Work Location:Multiple locations Job Posted by ApplicantPro

Job DescriptionThe Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to:· Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery.· Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines.· Verifies material, lubricants, solvents and packaging material are correct.· Produces products that conform to all of the requirements outlined in the job book· Monitors production process during the production run· Performs maintenance activities where applicable· Stops production when product is not in conformance and follows the nonconformance procedure.Product Inspection and Nonconformance Process 40%· Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book.· Completes all necessary documentation.· Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred.· 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION· None TECHNICAL SKILLS· SPC· Blueprint OTHER SKILLS· WIP tracking· Multitasking· Personal Accountability· Problem solving· Spatial dexterity· Manual dexterity· Attention to detail· Organizational skills· Basic computer skills Hourly starting rate: $18.65 + 15% differential per hour MICRO offers a comprehensive benefits package to eligible employees, including medical, dental and vision insurance; life and disability insurance; a 401(k)-retirement plan; paid time off; paid holidays; and other company-sponsored benefits. Eligibility and benefit offerings are subject to the terms of the applicable plans and company policies. While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work.While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills Hourly starting rate: $18.65 + 5% differential per hour MICRO offers a comprehensive benefits package to eligible employees, including medical, dental and vision insurance; life and disability insurance; a 401(k)-retirement plan; paid time off; paid holidays; and other company-sponsored benefits. Eligibility and benefit offerings are subject to the terms of the applicable plans and company policies. While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Electrical Technician \n \n Are you looking to make a career change to a stable company? This exciting opportunity offers a competitive salary, immediate hiring, and a friendly work environment. The ideal candidate will modify, repair, and improve existing electrical products, production machinery, and control systems while serving as a key technical resource and periodic backup to the Maintenance Manager. \n \n Shift Schedule: \n\n • Monday – Friday: 8:00 AM – 5:00 PM\n\n \n Key Responsibilities & Duties: \n\n • Electrical Maintenance & Repairs: Perform electrical maintenance and repairs, as well as modify and install production process equipment.\n, • Troubleshooting & Diagnostics: Diagnose, repair, and modify electrical and electronic production machinery, components, and relay logic circuits using multimeter diagnostics.\n, • Control Systems Maintenance: Troubleshoot, program, and install PLCs, HMIs, VFDs, and temperature controllers.\n, • Systems Expertise: Maintain, troubleshoot, and install automated HVAC/R systems, electrical networks, and industrial motors.\n, • Safety & Compliance: Conduct regular safety checks, identify potentially dangerous electrical conditions, and take immediate corrective action.\n, • Technical & Operational Support: Read and interpret electrical and mechanical drawings, utilize computer-assisted design tools, source replacement parts, and serve as backup to the Maintenance Manager as required.\n, • Leadership & Collaboration: Assist in directing crew tasks, foster positive team collaboration, and follow pre-established operational guidelines.\n\n \n Qualifications & Requirements: \n\n • Technical Proficiency: Hands-on experience with 24V, 110V, 220V, and 480V systems, basic circuitry, VFD programming, PLCs, and multimeter operation.\n, • Technical Schematics: Proven ability to read and understand both electrical and mechanical blueprints and schematics.\n, • HVAC/R & Motor Experience: Extensive background working with automated HVAC/R systems, electrical distribution systems, and industrial motors.\n, • Software & Systems: Proficient with Microsoft Office Suite and CAD/computer-assisted engineering software.\n\n \n Compensation & Benefits: \n\n • Competitive Salary\n, • Immediate Hire Opportunity\n, • Comprehensive Insurance: Medical, Dental, and Vision Insurance\n, • Paid Time Off (PTO)\n, • Friendly Work Environment\n\n

Maintenance Technician – Manufacturing \n 2nd Shift \n \n Join a rapidly growing, stable, and innovative company as a Maintenance Technician. This role offers competitive pay, excellent benefits (medical, dental, vision, PTO), and immediate hire potential. If you’re seeking a career move in manufacturing, this opportunity could be the right fit. \n \n Why Join Us \n\n • Great Pay\n, • Excellent Benefits\n, • Immediate Hire\n\n \n Responsibilities \n\n • Perform preventative maintenance on manufacturing machinery.\n, • Troubleshoot and repair PLCs, hydraulics, pneumatics, and electrical systems.\n, • Set up and optimize production equipment.\n, • Provide emergency and scheduled maintenance support to ensure continuous manufacturing operations.\n, • Read and interpret blueprints, manuals, and schematic drawings to repair equipment and systems.\n\n \n Qualifications \n\n • Proven experience as a Maintenance Technician in manufacturing.\n, • Strong understanding of electrical, hydraulic, and pneumatic systems.\n, • Knowledge of general maintenance processes and methods.\n, • Hands-on experience with AC/DC motors, PLCs, schematic reading, and electrical troubleshooting.\n, • Ability to prepare and set up machinery for scheduled production runs.\n\n

Work in the Fire Protection industry as a Senior Fire Sprinkler Technician in Central Jersey: We are seeking an experienced and dependable Field Sprinkler Project Specialist to join our team. This position is ideal for a skilled Fire Sprinkler Technician who thrives in the field and has the ability to work closely with Project Managers to ensure successful execution of commercial and industrial sprinkler system projects. The Field Sprinkler Project Specialist will be responsible for overseeing the on-site installation and maintenance of fire sprinkler systems, coordinating day-to-day field activities with the Project Manager, and ensuring work is completed in accordance with plans, codes, and safety standards. This is a hands-on field role requiring a high level of technical expertise, communication, and organizational skills. On-site technician for Fire Sprinkler projects. Coordinate with Project Managers on each jobsite. Inspect, test, and service sprinkler systems in accordance with applicable fire codes. Must have hands-on experience with field tools and equipment used in fire sprinkler installation and maintenance-including mechanical, electrical, and pneumatic systems-and must adhere to all applicable job site safety protocols and procedures. Process all service paperwork timely and accurately. Able to update and maintain information and processes in the company software system (Profit Zoom). Capable of handling on call (after-hours) emergency services work and regular hour emergency service jobs. Required Qualifications: Prior experience, minimum 2 years, in Water-Based Systems Layout, with demonstrated experience in field installation and coordination on commercial or industrial sprinkler projects. Strong written and verbal communication skills. Ability to be proactive in communicating and working with other departments. Valid driver's license and excellent driving record. Must pass a background check and pre-employment drug screen. Must be willing to travel throughout NJ as required to project field locations. Excellent customer service skills. Must be competent with all work-related power tools. Excellent work ethic. Comply with unform policy. Language: English Preferred Qualifications: Strong understanding of NFPA 13 and related codes. Ability to read and interpret construction documents and sprinkler system plans. Experience coordinating with project managers, inspectors, and other trades on active job sites. OSHA 30 Certification or equivalent safety training. Ability to work in a team or on their own.

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. Position Summary: We are seeking a skilled and dependable Setup Technician to support our precision metal stamping operations in Piscataway, New Jersey. Our manufacturing facility produces close-tolerance metal components for highly regulated medical device and aerospace applications. The Setup Technician is responsible for preparing, installing, adjusting, troubleshooting, and operating stamping presses, tooling, and auxiliary equipment. This position ensures that each production job is set up safely and efficiently in accordance with approved work instructions, engineering drawings, quality requirements, and customer specifications. The ideal candidate will have hands-on experience setting up progressive, compound, and secondary-operation dies; operating coil-fed press equipment; performing dimensional inspections; and resolving production issues. This role requires strong mechanical aptitude, attention to detail, accurate documentation, and a consistent commitment to safety and quality. Work Schedule: Monday - Friday (7:00 AM - 3:30 PM) & Overtime Eligible Flexibility To Work 2nd Shift (3:30 PM - 12:00 AM) Is also Preferred Requirements: Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. First Key Responsibilities: · Press and Tooling Setup · Set up and operate mechanical, hydraulic, and other metal stamping presses in accordance with approved procedures. · Install, align, secure, and remove progressive, compound, blanking, forming, piercing, and secondary-operation dies. · Verify that tooling identification and revision levels match the applicable work order, setup sheet, and production documentation. · Set and adjust shut height, stroke, press speed, feed length, material alignment, die-protection systems, lubrication, and other operating parameters. · Load and thread coil stock or strip material through feeders, guides, and tooling. · Operate and adjust coil-fed stamping systems and related material-feeding equipment. · Complete safe, accurate, and repeatable press setups within established timeframes. · Meet setup and changeover time expectations. · Produce acceptable first-piece samples with minimal adjustment. · Maintain required production rates while protecting product quality. · Minimize scrap, rework, unplanned downtime, and preventable tooling damage. · Complete all required production and quality records accurately. · Follow approved procedures without bypassing safety or quality controls. · Promptly communicate production, tooling, equipment, and quality concerns. · Maintain an organized and professional work area while supporting continuous-improvement initiatives. Non-essential Responsibilities: 1. Performs other duties as directed., 2. Enter additional non-essential responsibilities Position Qualifications and Competency Statements: · Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action. · Integrity – Ability to demonstrate consistency between words and actions. Follows through on commitments · Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges. · Work Ethic – Ability to make decisions based upon ethical principles, considering how the choice will affect others · Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information. · Achieving results and problem solving – Ability to collect and analyze information, problem-solve, and make recommendation for decisions. · Client orientation – Ability to prioritize the client’s needs first. · Accountability – Ability to accept responsibility and account for his/her actions. · Managing staff – Ability to identifying and developing the key skills necessary for employees to reach target performance in their specific roles. · Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines. · Communication – Ability to effectively communicate with others verbally and in writing. · High emotional intelligence – Ability to offers and accepts feedback with well-meaning intention. The ability to show empathy and encourage partnerships. · Ability to Embrace Change – Ability to adapt and is flexible to changes in work. · Innovative Thinking – Ability to demonstrates a positive attitude and is openness to new ideas and innovations. Knowledge, Skills, and Abilities · Ability to organize work and complete setups within expected timeframes. · Ability to manage multiple priorities in a fast-paced manufacturing environment. · Strong mechanical aptitude and troubleshooting skills. · Ability to read and interpret engineering drawings, blueprints, setup sheets, work instructions, and inspection plans. · Ability to use precision-measuring instruments accurately. · Ability to communicate clearly and professionally with coworkers and supervisors. · Ability to maintain the confidentiality of customer products, drawings, tooling, and manufacturing processes. · Willingness to learn new equipment, tooling systems, quality requirements, and production methods. · Strong commitment to workplace safety and product quality. Education and Experience · High school diploma, GED, vocational education, or equivalent manufacturing experience. · Five or more years of metal stamping setup experience. · Experience with progressive, compound, and secondary-operation dies. · Experience with coil-fed stamping operations and related material-feeding equipment. · Experience working within ISO 9001, ISO 13485, AS9100, or similar regulated quality-management systems. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.

Job DescriptionJob Title: Electro-Mechanical Maintenance TechnicianJob Description We are seeking a skilled Electro-Mechanical Maintenance Technician with over 5 years of experience in industrial maintenance or electro-mechanics. The ideal candidate will possess strong knowledge of PLCs, VFDs, and industrial controls, with the ability to work independently and troubleshoot under pressure. Experience in a food manufacturing environment is preferred, along with familiarity with CMMS systems and Microsoft Office. A willingness to work overtime, weekends, and holidays is required. Responsibilities • Troubleshoot and repair processing and packaging equipment., • Perform routine preventive maintenance and maintain proper documentation., • Read and interpret electrical schematics and wiring diagrams., • Troubleshoot and repair control panels, motors, and power distribution systems., • Work with conveyors, gearboxes, pumps, and automated packaging equipment., • Perform mechanical alignments, bearing replacements, and belt tensioning., • Calibrate temperature sensors, flow meters, and pressure gauges., • Use diagnostic tools such as multimeters and oscilloscopes., • Follow SOPs and maintain clean, safe workspaces., • Ensure compliance with GMP, HACCP, and OSHA standards., • Understand food safety protocols and hygiene standards.Essential Skills, • Strong knowledge of PLCs, VFDs, and industrial controls., • Ability to read and interpret electrical schematics and wiring diagrams., • Experience with industrial sensors and troubleshooting., • Proficiency in working with mechanical systems like conveyors and pumps., • Understanding of hydraulic and pneumatic systems., • Knowledge of GMP, HACCP, and OSHA standards., • Ability to follow SOPs and maintain clean, safe workspaces.Additional Skills & Qualifications, • Associates degree or technical certification in electromechanical technology, electrical engineering, or industrial maintenance., • High school diploma with extensive hands-on experience may be accepted., • 35 years of experience in manufacturing or food production environment., • Prior work with automated or robotic systems is a major plus., • Familiarity with CMMS systems like MP2 or SAP.Why Work Here? Enjoy a competitive hourly rate with a sign-on bonus, along with comprehensive benefits including Medical, Dental, Vision, Life Insurance, and 401(k). We offer paid time off and career development opportunities in a fast-paced, team-oriented environment with global impact. Work Environment The work schedule is from 7am to 3pm, with a requirement to lift 50+ lbs, stand for long periods, and work in varying temperature conditions. Strong problem-solving and communication skills are essential, as is the flexibility to work overnight shifts, weekends, and respond to emergency calls. A team-oriented mindset is crucial to support cross-functional tasks. Job Type & Location This is a Contract to Hire position based out of New Brunswick, NJ. Pay and Benefits The pay range for this position is $36.00 - $39.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in New Brunswick,NJ. Application Deadline This position is anticipated to close on Oct 12, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Pearce from CBRE is seeking an Experienced Critical Power Field Technician (UPS Field Service Engineer) to support customers throughout Newark, NJ, and the surrounding region. This position provides preventive maintenance, emergency service, commissioning support, and battery services on UPS systems, DC power systems, battery plants, PDUs, and static transfer switches in mission-critical environments including data centers, telecommunications facilities, healthcare facilities, and industrial sites. Success in this role requires strong electrical troubleshooting skills, sound technical judgment, and the ability to work independently while delivering exceptional customer service. You will be expected to safely diagnose complex power system issues, restore equipment to operational status, and build long-term customer confidence through professionalism and technical expertise. Core Responsibilities: • Perform preventive maintenance, inspections, testing, troubleshooting, and repairs on UPS systems, battery plants, DC power systems, PDUs, STS units, inverters, and related critical power equipment., • Diagnose electrical and control system faults using schematics, test equipment, manufacturer documentation, and industry best practices., • Install, commission, and replace UPS systems, battery strings, battery monitoring systems, maintenance bypass equipment, and associated power infrastructure., • Respond to emergency service calls and restore customer systems to operational status while maintaining the highest safety and quality standards., • Perform battery testing, capacity testing, failure analysis, and lifecycle replacement services., • Complete service reports, maintenance documentation, and customer communications accurately and professionally., • Develop strong customer relationships through technical expertise, responsiveness, and exceptional service delivery., • Mentor junior technicians and support field training efforts by sharing troubleshooting techniques, safety practices, and technical knowledge., • Maintain compliance with OSHA, NFPA 70E, company safety procedures, and customer site requirements., • Support additional field service activities as business and customer needs evolve. Core Experience: • Minimum 3+ years of hands-on experience servicing UPS systems, battery systems, DC power equipment, generators, switchgear, data center infrastructure, or other mission-critical electrical infrastructure., • Experience supporting equipment from manufacturers such as Eaton, Vertiv/Liebert, Schneider Electric/APC, Mitsubishi, Toshiba, ABB, or comparable critical power platforms is strongly preferred., • Strong understanding of AC and DC electrical theory, power distribution systems, and battery technologies., • Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation., • Experience using multimeters, power quality analyzers, battery testing equipment, and other diagnostic tools., • Demonstrated ability to independently troubleshoot and resolve complex electrical and electronic system failures., • Strong customer-facing communication skills with the ability to explain technical findings, recommendations, and corrective actions to both technical and non-technical stakeholders., • Proven commitment to safety, quality workmanship, and professional accountability., • Valid driver's license and willingness to travel within the assigned service territory, including occasional overnight travel as required., • Military veterans with backgrounds in electronics, avionics, communications, radar, power generation, electrical maintenance, nuclear power, or related technical specialties are highly encouraged to apply. Physical/Work Environment: At Pearce, safety is our highest priority. All employees are expected to comply with OSHA, DOT, NFPA 70E, customer site requirements, and company safety policies at all times. • Valid driver's license with an acceptable driving record and the ability to meet company vehicle requirements., • Ability to pass all required pre-employment screenings, including a drug screening and background check, where applicable., • Ability to lift, carry, push, and/or move equipment and materials weighing up to 100 pounds with or without assistance., • Ability to frequently stand, walk, bend, kneel, crouch, reach overhead, and work in confined or restricted-access areas., • Ability to work safely around energized electrical equipment and within mission-critical customer environments., • Ability to perform physically demanding work for extended periods while maintaining attention to detail and safety awareness., • Ability to manage multiple priorities in fast-paced field environments while maintaining the highest standards of safety and quality., • Willingness and ability to travel throughout the assigned service territory, including overnight and multi-day travel as business needs require. Per diem is provided for qualifying travel., • Willingness to participate in an on-call rotation and respond to customer emergencies when required., • Ability to obtain and maintain Security Clearance Access to customer facilities, including data centers, telecommunications sites, healthcare facilities, industrial locations, and government installations. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $35—$50 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description The Quality Assurance Technician I is responsible to test and ensure that goods meet manufacturing standards and are free of defects. Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products. The Quality Assurance Technician is expected to: • Maintain SPC limit at or above the corporate target. · Complete in process inspections in 2 hours or less · Complete raw material in coming inspections in 25 days or less · Performs in process inspections. · Performs raw material incoming inspection and movements through ERP system. · Assists with First Piece / First Article, incoming processed material, and final inspections. · Assists in engineering capability studies. · Assists in gage repeatability and reproducibility studies. · Records test data, applying statistical quality control procedures. · Completes incoming inspection documentation • Provides communication to Calibration Technicians of any additions, deletions, or changes to the process gages and equipment · Manages storage of samples and records. · Interprets engineering drawings, schematic diagrams, and / or work instructions. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is required. · 1-2 years of quality experience or equivalent combination of education and experience is required. · Previous experience working in a manufacturing environment is strongly preferred. LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · Automated Inspection Equipment · ERP software · MS Office Suite OTHER SKILLS · SPC · Manual dexterity · Spatial dexterity · Verbal communication · Written communication · Organizational skills · Interpersonal skills · Multitasking While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must frequently lift, push, pull, carry and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment is usually moderate.

Job DescriptionJob Title: Engineering Technician Location: South Plainfield, NJ Type: Contract to Hire Compensation: $25/hour Contractor Work Model: Onsite Hours: 1st Shift ENGINEERING TECHNICIAN Responsibilities: • Responsible for standard technician duties when no one else is available., • Maintain standardization charts on all tools within the characterization laboratory, • Qualify new machinery and requalify tools that have been repaired., • Actively monitor equipment’s health, and plan preventive maintenance when needed, • Generate operational documents such as standard procedures as needed, • Correspond with outside venders in professional manner, • Make any solutions that laboratory might need for etching/ polaron., • Track chemical inventory and make sure that it is ordered when necessary., • Coordinate repairs on malfunctioning tools., • Approve of any changes to lab procedures, • Operate System 28/G4 when no-one else is available., • Ability to train in creating and collecting calibration data for adjustments and use in MQW cal for growth, • Record gas consumption every week. Qualifications:, • Bachelor’s degree or above in Materials Science, Chemistry, Chemical Engineering, Electrical Engineering, or Mechanical Engineering, • Must be fluent in English., • Cleanroom experience is preferred System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description Queen Mary Inc., a school transportation company with an established in-house repair facility, is seeking an experienced Automotive Technician / Fleet & Shop Manager to take primary responsibility for the maintenance, repair, and readiness of our vehicle fleet. This is a hands-on position for an experienced technician who can independently diagnose and repair vehicles while also helping manage day-to-day shop and fleet operations. Our facility is also being prepared for future public-facing repair operations, creating an opportunity for increased management responsibility, performance-based bonus potential, and higher compensation as the shop grows. Responsibilities • Diagnose, maintain, and repair school buses, passenger vans, and other fleet vehicles., • Perform brake, suspension, steering, A/C, electrical, cooling system, and exhaust repairs., • Handle more advanced mechanical work including manifolds, timing chains/belts, head gaskets, valvetrain repairs, and engine or transmission replacement., • Maintain fleet readiness and prioritize repairs to minimize vehicle downtime., • Perform and track preventative maintenance., • Diagnose vehicle issues and determine appropriate repair procedures., • Coordinate parts ordering and outside vendors when necessary., • Maintain an organized and functional shop., • Assist with fleet inspections and vehicle preparation., • Train staff on wheelchair tie-downs, ramps, lifts, and related equipment., • Help develop shop procedures as operations expand., • Eventually assist with training and supervising junior technicians as the shop grows. Qualifications • 3+ years of professional automotive repair experience preferred, • Strong diagnostic and mechanical ability., • Must be capable of working independently at an A- or strong B-level technician level., • Fleet, commercial vehicle, and/or school bus experience is a plus., • ASE certifications are preferred but not required., • Valid driver's license., • Ability to manage multiple vehicles and prioritize repairs., • Professional attitude and ability to communicate with management, drivers, vendors, and other employees., • Must provide your own professional hand tools. Specialty tools, lifts, diagnostic equipment, and major shop equipment are provided. Position & Growth • Full-time position with fixed pay., • Opportunity for increased management responsibility as the shop expands., • Potential performance-based bonus opportunities as the public repair operation grows., • Opportunity for increased compensation based on responsibilities, performance, and shop growth., • Long-term opportunity to take greater ownership of fleet and shop operations. We are looking for someone who wants more than a basic mechanic position — someone capable of taking ownership of fleet maintenance and growing into a larger role managing the shop.

Job DescriptionIndustrial Electro-Mechanical Maintenance TechnicianLocation: Edison, NJ Pay: $30.00–$37.00/hour Job Type: Full-time, Direct Hire Schedule: Flexible — 1st or 2nd Shift AvailableAbout the RoleWe are seeking an experienced Industrial Electro-Mechanical Maintenance Technician to troubleshoot, repair, rebuild, and maintain manufacturing equipment.The ideal candidate has strong mechanical and electrical troubleshooting skills and hands-on experience with older industrial machinery.Responsibilities • Troubleshoot and repair industrial manufacturing equipment., • Diagnose mechanical, electrical, hydraulic, and pneumatic issues., • Repair and rebuild bearings, shafts, gears, gearboxes, motors, belts, chains, and couplings., • Troubleshoot basic PLC-controlled equipment., • Read electrical schematics and mechanical drawings., • Perform preventive and corrective maintenance., • Respond to equipment breakdowns and minimize downtime.Qualifications, • Hands-on industrial machinery maintenance experience., • Strong mechanical and electrical troubleshooting skills., • Experience with hydraulics, bearings, shafts, gears, motors, and mechanical power transmission., • Experience with older/legacy PLC-controlled equipment is a plus., • Ability to work independently and safely.Ideal background: Industrial Maintenance Technician, Industrial Mechanic, Electro-Mechanical Technician, Millwright, or Machinery Repair Technician.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description ⚡ Power Up Your Career – Join Pezz Electrical Service LLC as an Electrical Technician! ⚡ Position Title: Electrical Technician Company Name: Pezz Electrical Service LLC Pay Range: $33–$42+ per hour, depending on experience Industry: Electrical (Residential, Commercial) Location: Hillsborough, NJ Job Overview Pezz Electrical Service LLC is seeking a skilled and motivated Electrical Technician to join our Field Operations team. This full-time, on-site role is ideal for an experienced electrician with a strong foundation in residential and light-commercial electrical systems. You'll handle a wide range of installations, diagnostics, and repairs while working with a team that values innovation, adaptability, and continuous learning. Who We Are Pezz Electrical Service LLC is a trusted leader in electrical and HVAC solutions across Central New Jersey. We pride ourselves on delivering top-quality service and investing in the long-term success of our employees. Our technicians use the latest tools and technology, and we foster a culture of ownership, purpose, and continuous growth. Explore more about us at: www.pezzelectric.com Key Responsibilities • Perform electrical installations, repairs, and upgrades in residential and light-commercial environments, • Diagnose issues and ensure compliance with local and national electrical codes, • Install and maintain wiring systems, panels, breakers, outlets, and lighting, • Troubleshoot systems using standard testing tools and methods, • Read and interpret blueprints and technical diagrams, • Coordinate work with clients and team members to ensure project efficiency and customer satisfaction, • Maintain a clean, safe, and organized work environment, • Accurately document work completed and materials usedQualifications, • 6+ years of experience in residential and/or commercial electrical work, • Proficiency in electrical diagnostics, installation, and repairs, • Strong communication skills and professionalism in customer-facing situations, • Highly adaptable and motivated to continue learning and improving, • Journeyman Electrician License preferred but not required, • Valid driver’s license and clean driving recordBenefits, • Health & Wellness, • Medical, Dental & Vision Insurance, • Health Savings Account (HSA), • Wellness Reimbursements, • Safety Equipment Provided, • Compensation & Retirement, • $33–$42+/hour, based on experience, • Weekly pay cycle, • Retirement savings program, • Employee stock or profit sharing, • Time Off & Balance, • Paid Time Off: Holidays, Vacation, and Sick Days, • Career Growth, • Paid Training and Certifications, • Apprenticeship and Mentorship Programs, • Tech Package (smartphone or tablet), • Additional Perks, • Company Vehicle, • Uniforms Provided, • Company EventsSchedule, • Full-Time, • Monday–Friday, • Overtime available as neededWork Location, • On-site across residential and commercial projects in Central New JerseyEqual Employment Opportunity (EEO) Statement We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. Ready to make an impact? Apply today to become a vital part of the Pezz Electrical Service LLC team and advance your electrical career.

Job Description Applied Business Communications (ABcom) is a national low voltage BICSI Certified Prestige commercial structured cabling contractor and we are recruiting a Data Center Technician. “We Connect” relationally and technically. And, we do it within the framework of our corporate values: Family, Accountability, Profitability, Integrity, and Quality. Position is immediately available. Apply now to join our great team today! Requirements Essential Functions: • Perform Cages, Racks and Cabinets setup, layout, leveling and power strip installation., • Installation and termination of Fiber and Copper, • Installation of patch cords, • Performs installation of wiring, patch panel and network switch, hub, and console, • Ability to read and understand cabling matrix, • Perform Rack and Stack for various IT equipment when required on a day to day basis, • Uncrates, moves, equipment from loading dock., • Provide support to collocation customers, provide prompt response to customer requests., • Perform required Site inspections., • Work with vendors performing electrical ensuring that all work is performed according to established practices and procedures., • Understand, update and execute detailed Method of Procedures (MOPs), • Maintain data center operating procedures, • Maintain accurate records and document all problems, • Able to work night and weekends when needed SKILL/KNOWLEDGE REQUIREMENTS: • 3+ years experience running projects in the communications cabling Industry, • Data Center experience, • Demonstrate a clear knowledge of codes and standards, • Ability to complete and submit accurate documentation which tracks work progress including timesheets and other related documents, • Communicate with strong written and verbal skills, • Maintain a positive attitude and professional dress and demeanor CERTIFICATION (desired): • BICSI Certified Technician -- Installer 1 or 2, Copper and/or Fiber, • Other manufacturer certifications, • Other certifications such as OSHA, Confined Space, etc. TOOLS: Owns all company required communications technician hand tools, keeps them in good operating condition, and knows how to use them

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job DescriptionElectronic TechnicianDepartment: Maintenance Reports to: Maintenance Manager FLSA Status: Non-exempt Job Type: Full-time Location: New Jersey Pay Range: $35 – $42 per hour ScheduleMonday – Friday, 8:00 AM – 5:00 PMAbout Our ClientOur client is a family-owned business and has grown into the largest privately held polyethylene extruder in the U.S. While they’ve expanded their reach, they remain grounded in the values that shaped their foundation: faith, integrity, perseverance, and humility. Our client believes that people are at the center of their success. Every team member plays a vital role in helping build lasting relationships, deliver exceptional products, and create a positive impact on customers and communities. This position contributes to a mission driven by purpose and principle, where employees work with dedication, lead with heart, and stay true to the values that continue to guide the organization. Job Summary The Electronic Technician will modify, repair, and improve existing electronic products, equipment, and controls and will assist in developing new or updated electronic systems, components, or products. Essential Functions • Troubleshoot and facilitate repairs on electronic/electrical equipment and machinery used in manufacturing., • Identify and troubleshoot manufacturing processes, mechanical equipment, machinery, and components., • Interface with the Maintenance Department to identify replacement parts or components as needed., • Apply knowledge of commonly used concepts, practices, and procedures within the field., • Apply principles and techniques of engineering to accomplish assigned goals., • Rely on experience and judgment to plan and accomplish goals while following established instructions and guidelines., • Perform a variety of complex tasks requiring independent judgment., • Report potentially dangerous electrical equipment to the supervisor and take appropriate steps to resolve the issue., • Perform safety checks to ensure design plans are feasible under various conditions., • May lead and direct the work of others., • Develop and maintain a positive employee attitude toward their work and fellow employees., • Provide backup support for the Maintenance Manager as needed., • Perform other duties as assigned by the Maintenance Manager. Qualifications & Experience, • Bachelor's degree in Electrical/Electronic Engineering and/or a minimum of 5 years of experience in the field or a related area., • Experience in a manufacturing environment is strongly preferred. Knowledge & Skills, • Ability to perform high-level mathematical functions., • Ability to read, comprehend, and follow necessary safety procedures, signs, and instructions., • Thorough understanding of electronics principles and design., • Proficiency with Microsoft Office Suite or related software., • Strong attention to detail and organizational skills., • Excellent problem-solving abilities., • Ability to follow highly complex directions and procedures., • Excellent verbal and written communication skills across all levels of the organization., • Bilingual skills are a plus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position.Physical Requirements, • Moderate physical activity is required., • Significant amount of walking throughout the workday., • Lifting is required., • Ability to distinguish various wire colors and identify electronic system sections and wiring. Working Conditions, • This position normally works in a manufacturing environment., • Hearing, eye, and foot protection are mandatory when engaged in activities within the plant., • Ability to work in temperatures reaching 110°ree;F. What Our Client Offers, • Medical, Dental, and Vision Insurance, • 401(k) Retirement Plan with Company Match, • Paid Time Off (PTO) and Holidays, • Tuition Reimbursement Program, • Employee Referral Program, • Inclusive and Collaborative Work Culture, • Professional Growth and Development Opportunities Pay Range: $35 – $42 per hour Schedule: Monday – Friday, 8:00 AM – 5:00 PM

Job DescriptionPosition Summary:Primary duties include providing safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. The ideal candidate will have mechanical and electrical experience, a familiarity with hydraulics and pneumatics and have basic troubleshooting experience with proven ability of machine repair. What we offer: • Comprehensive benefits package- including but not limited to medical, dental, vision, 401K, and short-term disability coverage., • Corporate culture based on integrity, respect, accountability, and excellence, • Comprehensive training with numerous learning and development opportunities, • A career with a global packaging company where Safety, Sustainability, and Inclusion are business drivers and foundational elements of the daily work., • Additional site-specific benefits may include overtime opportunities, hands-on training, development programs, employee recognition, team events, wellness resources, and other offerings that support your success at work and beyond. How you will impact Smurfit Westrock: • Utilize electrical/mechanical skills to maintain machinery, • Contribute to a collaborative safety culture that drives results, • Provide rapid response to ensure seamless productivity. What you need to succeed: • 2-3 years in trouble shooting industrial electrical control systems down to component level, • An operational knowledge of automated industrial machinery which includes; motors, servos, pumps, drives, relays, 3 phase-power, communication devices, industrial / electronic controls, and power transmission systems., • A good understanding of hydraulic and pneumatic systems., • Able to install and set up both A/C and D/C drives, • PLC trouble shooting and problem-solving ability with practical, mechanical & electrical aptitude., • Must be able to read and interpret both electrical and mechanical drawings., • Working knowledge of power transmission equipment and bearings., • Basic welding skills preferred but not required., • Familiar with pumps, both air and electric., • Able to install and trouble shoot basic 3 phase motor control circuits, • Some knowledge of the various types of sensors and limit switches, • Familiar with computers and Microsoft software., • Strong written and verbal communication skills., • Ability to work independently in a mature and professional manner., • Ability to work flexible hours, overtime., • High school diploma or equivalent Military training and or Technical School preferred. The starting rate is $44.51 per hour, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 5 days of paid vacation will be granted after 1 year of service, and 12 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at www.smurfitwestrock.com/company/careers and the application window is expected to close by 10/21/26.

Job DescriptionDescription:Associated Fire Protection is seeking a skilled Fire Sprinkler Technician to join our team. As a Fire Sprinkler Technician, you will be responsible for installing, inspecting, testing, performing repairs and maintaining fire sprinkler systems, as well as various types of fire protection systems and equipment as needed. About Us Associated Fire Protection, founded in 1947, is a leader in fire protection and life safety. We have offices located through New Jersey and New York. We are seeking motivated individuals to join our growing team. While previous experience in fire protection is a plus, we are also looking for people looking to make a change to an industry that is dedicated to protecting lives and property. We are very passionate about our work, but understand that our family, friends and other interests play an important role in our lives. If you are thinking about making a change, give us a shout. Essential Functions- including but not limited to: • Perform installation, testing, repair, inspections, on sprinkler systems, and other types of fire protection systems and equipment as needed, in compliance with electrical and fire safety codes., • Ensure systems are functioning correctly and address any issues that arise., • Ensure that all systems meet local and national fire safety regulations., • Troubleshoot fire sprinkler systems., • Complete inspection reports and repair work orders via mobile device and submit them on a timely basis., • Ability to read blueprints., • Pull material for jobs as required., • Communicate with customers to review work and answer any service, quality or technical questions., • Other job specific functions may be required depending on level., • Participate in on-call rotation for emergency service. General Functions • This position includes a lot of interaction with customers and coworkers. The successful candidate must be able to communicate effectively and enjoy collaboration with others., • The successful candidate should read and be aligned with company’s mission statement, vision and values., • Depending on skill level, the successful candidate must be able to manage, lead and mentor people. Requirements: Qualifications, Experience and Education- including but not limited to: • Minimum of 1-2 years of experience working on fire sprinkler systems, or related systems is required., • Must be able to obtain any licenses or certifications as required in the area that you are working., • Experience working with fire protection and suppression systems is required., • Perform simple tasks independently., • Knowledge of local and national fire protection codes., • Excellent customer service skills., • Strong problem-solving skills., • Ability to work independently and as part of a team., • Computer, phone and tablet literate., • Well organized, self-motivated, flexible and a team player., • Ability to perform physical and mental functions of the job with or without a reasonable accommodation., • Must be able to drive to and from jobs and have a valid driver's license., • Must be able to work flexible hours and overtime as needed., • Emergency Service shifts are a requirement for this job. Qualified candidates must be able to respond to NY emergency service calls., • Ability to work on Job sites that may include construction sites and other locations where personal protective equipment will be required, and work in confined spaces., • The position has frequent periods of stress., • Job sites may include schools, hospitals, jails, pharmaceutical companies and other companies that may require additional background checks and medical and drug screens. Benefits Offered • This position offers benefits including Medical Care, Dental Care, and Vision Care., • Competitive pay., • Paid time off (PTO) and sick leave., • Supplemental Life and Supplemental Insurance., • Flexible spending (FSA), medical, dependent care (DCA), and commuter benefits., • 401k. DISCLAIMER: The physical efforts and working conditions are not limited to those listed in this job posting and may change at any time. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the described essential functions of the position. Additionally, the various job functions and requirements are not limited to the items listed here. Associated Fire Protection is an Equal Opportunity, including disability.

Job DescriptionDescription: Built for Stability In an industry where layoffs and company buyouts have become common, Approved Fire Protection & Security remain focused on long-term growth and steady opportunity. We’re proud to hire talented professionals who are looking for lasting careers, not short-term stops. If you are interested in: • Steady workflow, • Supportive team culture, • Long-term opportunity for growth, • Respect for your craft, • Three strong locations with established operations About Us: Approved Fire Protection Co. is New Jersey's oldest family-owned, full-service fire protection and safety equipment company. Our services include fire extinguishers, alarm systems, suppression systems, SCBA, gas detection, carbon dioxide, oxygen, sprinkler systems, and so much more. Approved Fire Protection’s mission is to supply life safety products and service to the industrial, commercial, pharmaceutical, and municipal companies in New Jersey and near surrounding areas. Job Summary: We are seeking an experienced and dependable Field Sprinkler Project Specialist to join our team. This position is ideal for a skilled Fire Sprinkler Technician who thrives in the field and has the ability to work closely with Project Managers to ensure successful execution of commercial and industrial sprinkler system projects. The Field Sprinkler Project Specialist will be responsible for overseeing the on-site installation and maintenance of fire sprinkler systems, coordinating day-to-day field activities with the Project Manager, and ensuring work is completed in accordance with plans, codes, and safety standards. This is a hands-on field role requiring a high level of technical expertise, communication, and organizational skills. Benefits: · Medical · HSA · Dental · Vision · 401k with company contribution · Aflac · Life Insurance · Long term disability · Summer Hours Program · Profit Sharing · PTO Requirements: Essential Duties and Responsibilities: • On-site technician for Fire Sprinkler projects., • Coordinate with Project Managers on each jobsite., • Inspect, test, and service sprinkler systems in accordance with applicable fire codes., • Must have hands-on experience with field tools and equipment used in fire sprinkler installation and maintenance—including mechanical, electrical, and pneumatic systems—and must adhere to all applicable job site safety protocols and procedures., • Process all service paperwork timely and accurately., • Able to update and maintain information and processes in the company software system (Profit Zoom)., • Capable of handling on call (after-hours) emergency services work and regular hour emergency service jobs. Required Qualifications: • Prior experience, minimum 2 years, in Water-Based Systems Layout, with demonstrated experience in field installation and coordination on commercial or industrial sprinkler projects., • Strong written and verbal communication skills., • Ability to be proactive in communicating and working with other departments., • Valid driver's license and excellent driving record., • Must pass a background check and pre-employment drug screen., • Must be willing to travel throughout NJ as required to project field locations., • Excellent customer service skills., • Must be competent with all work-related power tools., • Excellent work ethic., • Comply with unform policy., • Language: English Preferred Qualifications: • Strong understanding of NFPA 13 and related codes., • Ability to read and interpret construction documents and sprinkler system plans., • Experience coordinating with project managers, inspectors, and other trades on active job sites., • OSHA 30 Certification or equivalent safety training., • Ability to work in a team or on their own., • Must be able to work Monday through Friday 7:20 am – 3:50 PM If all the above resonates with your experience and skill set, apply to join our team. We provide ample opportunities for professional development to our team members through ongoing in-house training, as well as encouraging team members to attend certification programs. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Approved Fire Protection is deeply committed to a policy of equal employment opportunity for all its job applicants and employees. We seek to employ qualified persons in all job classifications and to administer all personnel actions affecting our employees without discrimination on the basis of race, color, religion, sex, pregnancy, age, national origin, sexual orientation, gender identity, political ideology, ancestry, or genetic information. Individuals with a disability, disabled and other protected veterans and any other characteristic protected by applicable law will be given the fullest consideration for employment in positions for which they are qualified. We also are committed to making reasonable accommodation for qualified individuals with a disability as well as abiding by any and all state and local laws, which in addition to the above prohibit discrimination in any form