Engineering science jobs in Hauppauge, New YorkCreate job alerts

JSG is hiring a Software Engineer in Hauppauge, NY. Must be a US Citizen and work onsite. Salary range: $127K-$137K - Bonus Our charter is to develop fuel measurement, management and inserting systems for commercial and defense airframers. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial markets. • Develop embedded software using C and/or model-based tools such as SCADE, • Develop high level and low level software requirements, • Create requirements-based test cases and verification procedures, • Perform software integration testing on target hardware using both real and simulated inputs/outputs, • Analyze software requirements, design and code to assure compliance to standards and guidelines, • Perform traceability analysis to customer specification requirements to software code, • Participate in software certification audits, e.g. stages of involvement (SOI), • BS in Software Engineering, Computer Engineering, Computer Science or related field, • 5+ years of experience performing software development, verification and/or integration, • Strong technical aptitude with analytical and problem-solving capabilities, • Excellent interpersonal and communication skills, both verbal and written, • Ability to work in a team environment, cultivate strong relationships and demonstrate initiative, • Experience with C programming language, • Experience with model-based software development using SCADE, • Experience developing embedded software control systems, • Experience planning and executing projects using Agile software development methodology, • Experience managing requirements using DOORS or DOORS Next Gen (DNG), • Experience with digital signal processing or digital filter design, • Experience with ARM microprocessors, • Experience with serial communication protocols (e.g. CANbus, ARINC, RS-232), • Familiarity with aerospace (e.g., DO-178, DO-330, DO-331) and/or industrial (e.g., IEC 61508) software certification requirements, • Familiarity with functional safety standards such as ISO 13489, IEC 61508, IEC 62061, ISO 26262 or ARP4761Software Engineer to join our team. We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle., • Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

For almost 130 years, Abel & Schafer has been producing baked goods in Europe under the KOMPLET brand name. In 1982 the company established a manufacturing facility in Ronkonkoma, NY to serve the fast-growing markets of the United States, Canada, Mexico, Central/South America, and the Caribbean. To support our continuous growth in these markets, we are currently recruiting a Research & Development Manager who will take full responsibility over all bread and pastry R&D projects and take the lead in developing new product ideas and concepts. Key Job Responsibilities: · Manage all bread and pastry R&D projects. · Develop product (re)formulations and recipes. · Develop strong cross-functional relationships with the R&D community as well as with Marketing, Sales, Quality, Operations, Engineering, Regulatory, and others. · Evaluate new ingredients, materials, products and processes with an emphasis on NAFNAC and clean label solutions. · Execute pilot lab runs, consumer tests, plant trials and validation trials. · Prepare operating guidelines for product development and ensure a proper documentation flow. · Generate recipes and supporting documentation for lab samples, such as sample request forms and project labels. · Participate in resolution of complaints and QA cases. · Generate re-work recipes when necessary. · Lead special projects concerning products, processes, equipment, and facility concepts and design. · Generate Signum Projects and project labels. · Participate in Food Safety Team meetings. · Manage time effectively and deliver projects on time and in full. Qualification: · B.S. degree in Bakery Science, Food Sciences, Food Engineering, or related scientific field. · Master Baker or Pastry chef certification. · 5+ years’ experience in formulation of bakery products. · 5+ years leadership experience. · Excellent organizational and communication (written and oral) skills. · Excellent project management skills with ability to prioritize multiple activities simultaneously. · Proficient with Microsoft Office suite (Word, Excel, PowerPoint, Teams). · Willing to travel as required. · Language skills: English; knowledge of Spanish and/or German a plus.

BS in Computer Science, Computer Engineering, Information Systems or Electrical Engineering (or related field), or working towards one of those degrees; completed at least 80 credits. The Automation Specialist represents a cross-section discipline requiring proportional knowledge in hardware and sof

Job Description At BAE Systems, we are all about our People, Mission, and Culture. We draw a clear connection between our work and our missions and demonstrate why customers trust us to provide mission-critical solutions. Our employees work on the world's most advanced electronics. Spanning air, land, sea, and space, we are developing the technology of tomorrow, delivered today. Drawing strength from our differences, we are innovating for the future, and you can too. Our Operations employees turn innovative engineering designs into real solutions to meet our customers' needs. Our training and development programs provide employees with career advancement in a diverse work environment. Our flexible work environment provides you a chance to change the world without giving up your personal life. We put our customers first - exemplified by our mission: "We Protect Those Who Protect Us®." Sounds like a team you want to be a part of? Then come build your career with us. This position is on first shift on a 9/80 work schedule with every other Friday off! The selected candidate for this position will be joining the Greenlawn NY Operations team in the Manufacturing Engineering/Technical Operations group and will provide sustaining engineering, process development and new process implementation across the manufacturing floor through hands-on problem solving, data analyses and application of engineering principles, Six Sigma and lean manufacturing principles to improve product flow and yields. Responsibilities may include:\n • Developing production processes and failure analyses of product, requiring knowledge of mil specs and manufacturing materials and processes including finishes, paints, adhesives, metals, welding, and brazing.\n, • Developing new processes and implementing changes in product flow to support Depot and current production lines through the application of lean manufacturing principles.\n, • Analyzing defect data to identify areas to improve yield. Working with others to implement process improvements. Appling Lean Six Sigma tools to solve production problems and improve existing processes. Using poke yoke principles to prevent production problems.\n, • Participating in and documenting root cause corrective action (RCCA) using problem solving methodologies.\n, • Defining and specifying the requirements for assembly tooling, fixtures and equipment to support current manufacturing operations and recommending changes for production line continuous improvements.\n, • Supporting the implementation of new automation assembly equipment including programming, process qualifications/validations and supporting tooling design.\n, • Bachelor's Degree in Material Science, Manufacturing Engineering, Mechanical Engineering or a related discipline.\n, • At least 2 years of job-related experience.\n, • Ability to obtain a Secret Clearance\n, • Exhibit sound interpersonal skills involving interfacing, coordinating and negotiating with company personnel at all levels, customers and suppliers.\n, • Experience reading and using technical drawings, wire lists, schematics, process sheets, and change orders.\n, • Lean manufacturing, Sigma Green or Black Belt preferred.\n, • Active Secret Clearance.\n Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Electronic Systems (ES) is the global innovator behind BAE Systems' game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere - from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact - for our customers and the communities we serve. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

Job DescriptionJob Title: Civil Engineer Job Description We are seeking a skilled Civil Engineer to manage and mentor a team of design engineers, ensuring timely and high-quality project delivery. The ideal candidate will coordinate resources and schedules to meet project milestones and budget constraints while applying expertise in stormwater management, hydrology, hydraulics, grading, and earthwork to support site development designs. Responsibilities • Manage and mentor a team of design engineers to ensure high-quality project delivery., • Coordinate resources and schedules to meet project milestones and budget constraints., • Review and approve engineering designs, reports, and submittals., • Prepare and review engineering reports, hydrology studies, and earthwork evaluations., • Contribute to the development of specifications and project documentation., • Liaise with municipalities and regulatory agencies to obtain necessary permits and approvals., • Ensure designs comply with local, state, and federal regulations., • Monitor construction activities to ensure adherence to design specifications and permit conditions., • Provide engineering support throughout the construction phase, resolving field issues as needed., • Exercise sound engineering judgment in selecting design alternatives and resolving technical challenges., • 3+ years of experience working on site/civil projects., • Expertise in site development, grading, civil design, and land development., • Proficiency in AutoCAD., • Ability to manage and run projects independently., • Experience with zoning review, permitting, drainage, and landscape design. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Holtsville,NY. Application Deadline This position is anticipated to close on Dec 19, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionSUMMARY: Parker Fluid Systems Division (FSD) is seeking an Embedded Senior Software Engineer to join our team. We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle. FUNCTIONS: Our charter is to develop fuel measurement, management and inerting systems for commercial and defense airframers. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial markets. The individual will have the following responsibilities (not an inclusive list): • Develop embedded software using C and/or model-based tools such as SCADE, • Develop high level and low level software requirements, • Create requirements-based test cases and verification procedures, • Perform software integration testing on target hardware using both real and simulated inputs/outputs, • Analyze software requirements, design and code to assure compliance to standards and guidelines, • Perform traceability analysis to customer specification requirements to software code, • Participate in software certification audits, e.g. stages of involvement (SOI) REQUIRED: • BS in Software Engineering, Computer Engineering, Computer Science or related field, • 5+ years of experience performing software development, verification and/or integration, • Strong technical aptitude with analytical and problem-solving capabilities, • Excellent interpersonal and communication skills, both verbal and written, • Ability to work in a team environment, cultivate strong relationships and demonstrate initiative, • Need Embedded SW developer from a Regulated Environment - MUST HAVE HIGHLY PREFERRED: • Experience with C programming language, • Experience with model-based software development using SCADE, • Experience developing embedded software control systems, • Experience planning and executing projects using Agile software development methodology, • Experience managing requirements using DOORS or DOORS Next Gen (DNG), • Experience with digital signal processing or digital filter design, • Experience with ARM microprocessors, • Experience with serial communication protocols (e.g. CANbus, ARINC, RS-232), • Familiarity with aerospace (e.g., DO-178, DO-330, DO-331) and/or industrial (e.g., IEC 61508) software certification requirements, • Familiarity with functional safety standards such as ISO 13489, IEC 61508, IEC 62061, ISO 26262 or ARP4761Software Engineer to join our team., • We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle.

Job Description Embedded Senior Software Engineer – Aerospace/Industrial • Location: Central Islip, NY, • Employment Type: Permanent, Full-Time, • Shift: 1st Shift, Monday–Friday (flexible), • Compensation: $127,000–$137,000 + 12.5% annual bonus, • Work Arrangement: 100% onsite, • Citizenship Requirement: Must be a U.S. Citizen, • Job ID: bh18176 About the Role A highly respected engineering organization in the fluid systems space is seeking a Senior Embedded Software Engineer to lead and execute critical development projects for advanced measurement and control technologies used in aerospace and industrial applications. This is a great opportunity for an engineer who thrives in a regulated environment and enjoys seeing a project through from concept to completion. If you’re an embedded software engineer who loves hands-on development, tackling complex technical challenges, and partnering closely with systems and hardware teams, this role offers long-term career growth and impactful work. What You’ll Do This role is split approximately 75% software development and 25% project leadership, including owning full project lifecycle execution. Responsibilities include: • Develop embedded software in C and/or model-based tools such as SCADE, • Create high-level and low-level software requirements, • Develop requirements-based test cases and verification procedures, • Conduct software integration testing on target hardware using real and simulated I/O, • Analyze requirements, design, and code to ensure compliance with industry standards, • Perform traceability analysis from customer specifications to software implementation, • Participate in formal certification audits and regulatory reviews, • Collaborate closely with Systems and Hardware Engineering teams, • Lead assigned projects from planning through execution Required Qualifications • Bachelor’s degree in Software Engineering, Computer Engineering, Computer Science, or a related discipline, • 5+ years in embedded software development, verification, or integration, • Prior experience working in a regulated environment (Aerospace, Industrial, Automotive, Medical, Rail, etc.), • Strong proficiency with embedded systems and microcontrollers, • Excellent analytical, communication, and problem-solving skills, • Demonstrated ability to lead and execute projects end-to-end, • Must be a U.S. Citizen for site security requirements, • Ability to work 100% onsite in Central Islip, NY Highly Preferred Experience • Strong hands-on experience with C programming, • Model-based development using SCADE, • Embedded control system development, • Agile project planning and execution, • Requirements management tools (DOORS / DOORS Next Gen), • Digital signal processing or digital filter design, • ARM microprocessor experience, • Familiarity with serial communication protocols (CANbus, ARINC, RS-232, etc.), • Knowledge of software certification standards such as:, • DO-178, DO-330, DO-331, • IEC 61508, ISO 26262, EN 50128, • Functional safety frameworks (ARP4761, ISO 13489, IEC 62061, etc.) Why Consider This Opportunity? This employer offers an extremely competitive benefits package, including: • Comprehensive medical, dental, vision, and prescription coverage, • 401(k) with 100% match on the first 5%, • Company-funded retirement contributions (3% annually), • Paid parental leave and adoption assistance, • Tuition reimbursement and professional development support, • Paid Time Off + 13 paid holidays, • Additional voluntary benefits (legal, identity protection, pet wellness, etc.), • Short-term and long-term disability at no cost How to Apply If you have strong embedded software experience in a regulated environment and enjoy leading technical projects, I’d love to speak with you! Company DescriptionConnexion Systems & Engineering is a full-service staffing firm, whose mission is to provide "best in class" staffing services to our clients and job seekers alike. We strive to achieve excellence in staffing, job placement and recruiting services, while treating our clients, employees, and candidates with the professionalism and respect they deserve.Connexion Systems & Engineering is a full-service staffing firm, whose mission is to provide "best in class" staffing services to our clients and job seekers alike. We strive to achieve excellence in staffing, job placement and recruiting services, while treating our clients, employees, and candidates with the professionalism and respect they deserve.

Job Description FLSA Status: Salary/Exempt Reports To: General Manager Direct Reports: None Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Responsibilities • Assist with research and development, new product introduction, and production deployment., • Create CAD models, drawings, specification sheets, and prototypes for new and existing products., • Modify existing products to improve efficiency and performance., • Design for manufacturability., • Research materials and production costs to determine manufacturing requirements., • Ensure product designs conform to customer and government specifications., • Test designs to ensure they meet safety, usability, and environmental impact standards., • Analyze data from tests and identify opportunities for improvement., • Collaborate with engineering, sales, procurement, and production teams., • Present designs and prototypes to customers and colleagues., • Create BOMs and routings for new products, legacy products, and engineering changes as necessary., • Develop and manage costing analysis as necessary during product development and deployment., • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system., • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc., • Manage projects, including budgets, schedules, and costs when applicable., • Perform DFMEAs, PFMEAs, and Risk Assessments., • Ensure that the company's designs and designing processes comply with all government laws and regulations., • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision-making., • Collaborate with quality team to assure products are being produced to applicable specifications., • Evaluate quality control processes and make recommendations for improvements in quality control., • Devise procedures to inspect and report quality issues., • Assure the reliability and consistency of product manufacturing by checking processes and final output., • Facilitate proactive solutions by collecting and analyzing manufacturing data., • Document and optimize design procedures to ensure replicability and compliance with internal and external standards., • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis., • Assist in the preparation for quality audits., • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Minimum Qualifications Education and Experience • Bachelor of Science in engineering or related field, • 3-10 years of design engineering or relevant experience, • 2-5 years of electrical connector design experience Knowledge • Ability to create 3D Computer-aided design (CAD) models and drawings, • Ability to read drawings, specifications, test procedures, etc., • Fundamental mathematical and physical principles, • Proficient in MS Office, • Geometric Dimensioning and Tolerancing (GD&T) Skills • Good oral and written communication and presentation skills, • Great interpersonal skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Other responsibilities, initiatives and ad-hoc projects as required. Compensation range: $90,000 - $125,000

Job DescriptionCompany Description THE BEST NEED THE BEST. Known as "The Game Changers”, Diablo Tools () elevates the market by providing Best in the World and Best for Our World cutting tool and power tool accessory solutions for professional users. With innovation at the forefront of everything we do, Diablo Tools continues to “raise the bar” by bringing the most advanced technology to the portable tool market that increases quality and performance and saves our users time and money. Diablo Tools is committed to providing first-class technology that makes dominates the jobsite but also makes it safer. Our innovation, however, is not the only thing that sets us apart from the competition – our people do, too. At Diablo Tools, we pride ourselves on putting “People First.” We cannot be the Best without the Best. That’s why we onboard the Best talent and continue to invest in them through ongoing training and recurring professional development opportunities. We are proud to provide a culture that is innovative, supportive, fun, connected, and nurtures growth for our people. Our commitment to our employees has been recognized by the employee engagement platform, Energage, by naming Diablo Tools a Top Workplace in 2024. Additionally, Diablo Tools was named a Top Workplace in the cultural excellence category for professional development, employee well-being and employee appreciation. We strive to be the best for our end-users and the best for our team – so Join the Best, today! We are expanding our Midwest sales team and are looking for an extroverted, highly motivated, and driven Sales Professional with 1-8 years of sales experience. This is an amazing opportunity to take your competitive fire and win with THE BEST. Our future-forward approach in everything we do is what separates us from the rest. We Lead, Never Follow. Basic knowledge of construction products and power tools is not necessary. We provide a world class, hands-on sales and product training program for all candidates regardless of previous experience. We offer a tremendous career track in sales and marketing focused on development and growth for our employees. Are you hungry, ready for immediate impact, excited for a challenge? Change your future forever by joining the Best! Job Description Gain 100% market share within their categories, channels and markets and to implement strategic approaches to deliver monthly, quarterly and yearly sales numbers. Assisting Regional Managers or Key Market Managers with various tasks including training, management of trade shows and coaching other Territory Managers. • Effectively develop programs and sales strategies for Key dealers within assigned territory with the purpose to convert, promote and consolidate key categories to Diablo/Freud. Plan for monthly, quarterly and yearly growth while staying within T&E Budget., • Aide assigned Territory Managers in scheduling, placing orders, developing presentations, suggested orders, and other administrative duties that contributes to a collaborative approach to growing the territory’s market share and sales volume., • Mentor & counsel Territory Managers (as assigned) on company best practices, customer approaches & strategies in an engaging and highly communicative manner. (Daily contact with TMs), • Administrative responsibilities include scheduling, placing orders, developing presentations, suggested orders, and other administrative duties that contributes to a collaborative approach to growing the territory’s market share and sales volume., • Consistent communication with direct supervisor to discuss customer and company strategies / specifics. Attend all conference calls and provide requested revenue planning., • Support RM and/or KMM on topics like development of programs, sales strategies for Key dealers, joint coaching calls with RMs & team, plan targeted training/development/onboarding programs, OTJ training of TMs, and support management of trade shows., • Travel minimum 5/6 days per month to meet Customers & Develop Territory Managers (as assigned)Qualifications, • Bachelor’s degree in business/marketing related field or 8 years of commensurate experience., • Proven sales experience within this territory., • Proven effective communication with corporate staff, sales organization & customers., • Strong understanding of sales strategies, processes, and approaches., • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Teams) Additional Information Diablo Tools and the Robert Bosch Tool Corporation are proud supporters of STEM (Science, Technology, Engineering & Mathematics) Initiatives • FIRST Robotics (For Inspiration and Recognition of Science and Technology) Indefinite U.S. Work authorized individuals only. Future sponsorship for work authorization unavailable. Safety Sensitive position

Job DescriptionSalary: $36-$40/hr Impact Environmental has an immediate opening for an Associate Project Manager with 5 plus years of full-time environmental engineering, geology, or environmental science experience to join our team to work on New York projects. Position Qualifications • Excellent communication and technical writing skills required;, • Self-driven and ability to complete tasks with minimal supervision and direction;, • Experience with execution of Phase I ESAs and scoping/implementation of Phase II ESAs;, • Knowledge of relevant environmental regulations related to the New York State Department of Environmental Conservation (NYSDEC) Site Remediation Programs and New York City Office of Environmental Remediation (NYCOER) Volunteer and E-designation programs., • Experience with site characterization assessments, strong analytical capability for evaluating and interpretation of data from various media, preparing technical reports with findings/recommendations with Project Manager and Principal guidance and review;, • Ability to coordinate and manage field tasks and activities;, • Preparing proposals, tracking project budgets, and reviewing contracts;, • Fundamental understanding of remediation treatability/pilot studies and design for various types of media (e.g., soil vapor extraction or sub-slab depressurization);, • Overseeing and documenting environmental remedial actions; and, • Managing and mentoring junior staff of scientists/field technicians. Experience with following areas are considered a plus: • AutoCAD proficiency;, • Professional Licensure or Registration; and, • Preparing Long Island Well Permits, SPDES permits, and NYC sewer discharge permit applications. General Requirements: • Based out of our Bohemia, Ny office, with travel throughout the greater NY area;, • Good organizational skills;, • Comfortable with logistics coordination and working with outside consultants, vendors and service providers;, • Team-oriented, safety conscious individual with a positive attitude and strong work ethic;, • OSHA 40 hour (HAZWOPER) and/or OSHA 30 hour (Construction Safety) certifications a plus;, • Valid driver's license and good driving record with no DUI's, excessive or major violations in the last 5 years;, • Must be wiling to consent to drug and background screening. Required Experience: • Bachelor's degree in environmental, engineering, or science-related fields - Masters a plus., • Minimum of 5 years of full time New York environmental consulting or engineering experience. Why work with Impact? Because we don't just hire employees, we invest in them. • Competitive salary., • Medical, dental, and vision insurance., • Retirement with company match., • Paid time off and holidays., • Employer paid Life and Long-Term Disability Insurance., • Ongoing training to support growth opportunies.

Job DescriptionSalary: $100,000-$120,000/annual Join us! Impact Environmental is a Long Island based environmental firm with 35 years of success specializing in Brownfield Redevelopment. We are in search of a Project Manager to be based from our Bohemia, NY office to lead New York projects. Candidate must have a minimum of 8 years of New York environmental consulting, engineering, geology, or environmental science experience. This position provides opportunities for personal and professional development by joining a growing team with a diverse private sector clientele, and to gain experience in many project types and sizes in all stages of brownfield assessment, investigation, remediation, and redevelopment. Position Expectations: • Oversees diverse environmental projects with varied local, state (NY/NJ/CT) and federal regulatory drivers (i.e., City VCP, State Brownfields, RCRA, and Superfund)., • Planning and directing environmental field observation and testing programs; including laboratory test selection and data evaluation., • Supervises staff in order to complete deliverables including resource cost estimating, scheduling, report preparation, technical memorandums, and contracts/proposals., • Understand client needs and is able to develop strong client relationships., • Capable of managing financial and technical aspects of projects., • Reviews and/or drafts technical reports and letters with a focus on quality and meeting client and regulatory objectives., • Evaluates subsurface characteristics for soil, soil vapor, and groundwater investigation and remediation projects., • Effective in assigning and managing work. Job Requirements and Qualifications: • Relevant experience with a focus on applications of environmental investigations and remediation., • Computer Skills - Strong computer literacy skills including proficiency in industry standard software., • Holds a bachelors or masters degree in geology, environmental engineering, environmental science, or a similar scientific major., • OSHA 40-hour (HAZWOPER) and/or OSHA 10-hour/30-hour (Construction Safety) certifications a plus., • Must possess excellent communication skills, work product quality, teamwork, organizational skills, technical writing, and client service skills., • Willing to be based out of our Suffolk County Long Island office, with travel into New York City., • Professional certification(s) or licenses a plus (CHMM, PG and/or PE)., • Business development leads a plus., • Experience with software (Surfer, MODFLOW, AutoCAD, GIS) a plus but not required., • Willingness to take drug test, physical, background check and must have a satisfactory driving record in accordance with the Company's driving (MVR) policy. Why work with Impact? Because we don't just hire employees, we invest in them. • Competitive salary., • Medical, dental, and vision insurance., • Retirement with company match., • Paid time off and holidays., • Employer paid Life and Long-Term Disability Insurance., • Ongoing training to support growth opportunies.

Job Description Established in 1926, Family Service League is a social services agency transforming lives and communities through mental health, addiction, housing, and essential human services with more than 60 social service programs in over 20 locations. SCHEDULE: Monday through Friday 8:00 AM - 4:00 PM SUMMARY: Family Service League is seeking a full-time Senior IT Administrator to be responsible for discovering new technologies to assist the Agency in meeting its mission, as well as finding ways to increase efficiencies using existing technology. This position is responsible for designing, developing and maintaining the agency’s network, systems and SaaS applications, ensuring that all assets operate at optimum performance levels and are safeguarded. The Senior IT Administrator ensures the security of data, voice, hardware and software, using best practices and techniques. We offer a competitive compensation, and generous benefits package including the following: • Health and Dental Insurance, • Vision Insurance, • Flexible Spending Account (FSA), • Retirement Savings Plan with a 5% employer contribution, • Life and AD&D Insurance, • Generous PTO (paid time off), • Up to 11 paid Holidays, • Paid Sick Leave, • Student Tuition Remission Program, • Employee Assistance Program (EAP), • Company paid Short-Term and Long-Term Disability, • Employee Discounts and more! RESPONSIBILITIES: • The Senior IT Administrator will set up and manage the Data Loss Prevention (DLP) program by creating clear rules, standard procedures, service expectations, and automating routine tasks via workflows., • Handle security exception requests, vendor risk assessments, endpoint security products and policies, incident response, and external secure file sharing., • Manage and support major SaaS platforms (e.g Microsoft Power Apps, Microsoft365, Google WorkSpace, etc), • Monitor the performance of Data-Driven Networks, Systems and Applications (OnPrem/ SaaS). Collect and analyze network data, use data from security tools to perform security incident forensics and root-cause analysis, and monitor computer and device activity using data analytics to detect potential security issues., • The Senior IT Administrator will manage the design, performance and improvements of the Agency’s network and communication technologies, ensuring that systems and platforms align with best practices and FSL’s strategic objectives., • Actively support the Agency’s strategic initiatives and contribute to organizational performance by implementing hardware, software and procedural efficiencies related to the Agency’s network., • Manage and monitor cyber security events pertaining to FSL’s assets (Data, Network, Systems, Applications (OnPrem/ SaaS))., • Oversee FSL security systems, including security camera hardware (OnPrem/ SaaS), by assigning access-privilege levels and ensuring proper functioning of FSL’s multi-site access-control systems., • Identifying training needs and providing education to both end users and IT staff on best practices that supports and strengthens the organization’s security posture., • Manage and monitor FSL’s Mobile Device Management (MDM) System, and deployment programs., • The Senior IT Administrator will ensure that hardware is accurately inventoried, software licenses are secured, and renewal schedules are tracked., • Assist IT team in the areas of desktop troubleshooting and phone support, laptop/tablet set-up, and the maintenance of equipment and license inventories., • Provide input to the planning and development of the Agency’s annual IT budget., • Assist in coordinating activities related to Disaster Recovery and Business Continuity Planning., • Anticipate and recommend projects and solutions for emerging technical concerns., • Complete assigned projects by coordinating resources, developing timetables and working with management and users to optimize timely solutions., • Strong written and verbal communication skills to present findings and recommendations clearly to both technical colleagues and non-technical business leaders., • Maintain documentation for all agency technology., • Provide technical support as needed during evenings, weekends, and other off-hours., • All other duties as assigned. QUALIFICATIONS: A Bachelor’s Degree in Computer Science, Engineering, or related field is required. A Master’s degree and relevant professional certifications are preferred. At least 5 years of progressive experience that includes strong knowledge of network and system administration, communication protocols, coding languages and diagnostic tools. Experience in a healthcare environment is preferred. Demonstrated experience in SQL, Power BI, Microsoft Active Directory, and Business Continuity are required. Knowledge of Microsoft SharePoint, Power Platform are preferred. Familiarity with cloud networking concepts, including integrations, SaaS gateways, and cloud security best practices. Strong Scripting knowledge (e.g PowerShell) for automating routine administrative tasks. Advanced level skills in all Microsoft Office applications required. Strong ability to explain technical findings clearly and effectively to various audiences. Strong understanding of statistical analysis and techniques to interpret data correctly. Strong troubleshooting skills and the ability to work independently required. Strong interpersonal, team building, and verbal and written communication skills required. Strong ability to multitask, along with excellent judgement and problem-solving skills required. PHYSICAL REQUIREMENTS: This position often requires sitting and working at a computer for extended periods of time. Must be able to lift and carry fifty (50) pounds. Driving: Travel to Agency offices and other locations throughout Suffolk and Nassau County.

Job Description Job Description • Building part test setups, qualification testing, making of production test jigs, developing test routines, test software and test automation, • Provide maintenance and repair support for test station hardware, software, and interface test adapters, including both custom-designed and COTS systems., • Test PC boards., • Prepare documentation for PCB assembly and test travelers., • Support test box development and initial production runs., • Utilize C# code for test development., • Perform ATE test integration and development., • Assist Design Engineers, when necessary, in troubleshooting and repairing products returned by customers. Requirements • Bachelor of Science in Electrical Engineering (BSEE), an electrical engineering degree, or equivalent military training and experience., • Candidates should possess a background in power electronics., • Understanding of analog circuit design, circuit analysis, digital circuit design, and analog signal conditioning., • Desirable exposure to software such as C#, embedded code development, and debugger usage.Company DescriptionOur client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.Our client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.

Job Description Title: Cybersecurity & Network Engineer Department: Information Technology Reports To: Chief Information Technology & Digital Officer (CITDO) or Manager, Technical Services FLSA Status: Exempt Location: On-site — Ronkonkoma, NY (with flexible work-from-home as needed) Position Overview The Cybersecurity & Network Engineer designs, secures, and operates the organization’s IT infrastructure across on-premise and cloud environments. This hands-on role strengthens Qosina’s network backbone and cybersecurity posture; configuring firewalls, switches, and virtual environments while performing penetration tests, audits, and incident response. It is a balanced position for an engineer equally skilled in infrastructure management and cyber defense. Essential FunctionsNetwork & Infrastructure Engineering • Design, implement, and maintain reliable LAN, WAN, and WLAN networks., • Configure and secure switches, routers, firewalls, VPNs, and wireless APs., • Manage routing, segmentation, and performance optimization., • Support virtualization environments and ensure secure on-prem ↔ cloud connectivity., • Troubleshoot and resolve complex networking and infrastructure issues.Cybersecurity Operations & Compliance, • Conduct and support security audits, vulnerability assessments, and penetration tests., • Monitor, detect, and respond to cybersecurity events within SecOps processes., • Implement and enforce policies and controls aligned with GRC frameworks., • Maintain system/network hardening baselines, patch compliance, and incident documentation., • Support recovery, backup validation, and business continuity planning.Governance & Collaboration, • Align network and security engineering with enterprise governance, risk, and compliance objectives., • Develop and maintain documentation, policies, SOPs, and audit evidence., • Governance, Risk & Compliance (GRC): Defines risk appetite, policies, and controls., • Security Operations (SecOps): Detects and responds to threats across all layers., • User: Manages identity, access, and awareness training., • Data: Safeguards information via classification, encryption, and DLP., • Application: Secures software and API traffic flows., • Host: Hardens servers, endpoints, and virtual machines., • Network: Controls traffic flow, segmentation, and Zero-Trust connectivity., • 7 + years combined experience in cybersecurity and network engineering., • Proven expertise in:, • Firewall, router, and switch configuration and management, • Network segmentation and VPN design, • Security audits and vulnerability remediation, • Windows and Linux administration, • Virtualization and hybrid-cloud connectivity, • Identity and access management (MFA, RBAC, PAM), • CCNP, Security+, CISSP, or equivalent professional certification.Professional Attributes, • Analytical mindset with strong troubleshooting skills., • Attention to detail and documentation discipline., • Ability to work independently and collaboratively across teams., • Commitment to continuous learning and security excellence.Why Join Qosina, • Direct impact on enterprise security and network resilience., • Modern, collaborative, and mission-driven IT culture., • Flexible on-site schedule and career development support., • Competitive compensation and professional certification programs.

Job Description Semiconductor Process Technician (Wafer Fabrication) Location: Suffolk County NY On-Premises Full-time 2nd Shift (1:30 PM – 10:00 PM) Important: MUST BE U.S. CITIZEN OR GREEN CARD HOLDER Local candidates ONLY. About Our Client Our client has been a pioneer in advanced microelectronics for more than five decades, supplying the aerospace, defense, and medical industries with high-reliability technologies that power mission-critical systems. Their reputation is built on precision, innovation, and a relentless commitment to quality. Joining this team means stepping into an environment where every wafer you touch has real-world impact—keeping aircraft airborne, enabling advanced defense systems, and ensuring medical devices perform when lives depend on it. This is not just a job; it’s a career path in one of the most innovative and future-proof industries today. Why This Role Matters You won’t just “run equipment”—you’ll play a critical role in building high-performance semiconductor products that are trusted in some of the toughest environments on Earth. This is a career-track role in semiconductor manufacturing. You’ll gain valuable hands-on skills, master advanced processes, and open doors to future opportunities in process engineering, equipment support, or leadership. What You’ll Gain • Career Growth – Enter at the technician level and position yourself for advancement into engineering or leadership roles., • Cutting-Edge Training – Learn deposition, etching, photolithography, and other core semiconductor processes., • Impactful Work – Your contributions directly support mission-critical aerospace, defense, and medical applications., • Strong Benefits – Medical, dental, 401(k) with company match, free life insurance, tuition reimbursement, and more., • Operate semiconductor fabrication equipment (deposition, etching, photolithography)., • Inspect wafers with precision tools to ensure product quality., • Perform preventative maintenance and troubleshoot minor issues., • Collaborate with QA and process teams to improve yield and efficiency., • Keep accurate process logs and contribute to continuous improvement., • Associate degree in Microelectronics, Chemical Engineering, Materials Science, or related field (Bachelor’s a plus)., • 1–2 years of hands-on experience in semiconductor processing, wet chemistry, or a technical manufacturing environment., • Analytical mindset and problem-solving skills., • Strong teamwork and communication abilities., • U.S. citizenship or permanent residency (required by export controls).

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office with occasional travel to manufacturing location in Mexico The pay range for this position is between $120,000 and $150,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Senior Design Engineer is responsible for developing new magnetics related components based on customer or marketing inputs. They shall have working knowledge of transformer design, property of materials, electrical testing, and design for manufacturability. Performance will be measured on creating designs that meet or exceed customer requirements, timely transition of new designs from concept to production readiness, collaboration with production in suggesting and implementing productivity projects. Key Position Accountabilities: · Design and Development: Plan, conceptualize, and develop new magnetics components using new and innovative technology. Design analog circuits related to high frequency data bus and video signal transmission. Provide material and labor estimates to Sales for customer requests for pricing. • Equipment and Materials Research: Actively seek out opportunities improve existing processes by keeping up with new equipment and material releases. Seek out ways to integrate new equipment and materials to improve productivity., • Collaboration: Work closely with engineers, managers, and other design professionals in the development of prototypes, sustaining efforts, and integration of systems into manufacturing processes. Support the transition of designs from concept to prototype and to full-scale production., • Mentoring and Design Review: Coach junior engineers in solving design issues. Responsible for project management of Design Reviews., • Testing and Validation: Create, review, and verify test setups. Support the execution of testing procedures required for product acceptance and qualification. Collaborate with internal and external facilities to validate design performance against defined specifications., • Engineering Analysis: Perform calculations to support CapEx return on investment decisions., • Material Selection and Development: Choosing the right material for a specific application, considering factors like strength, durability, cost and environmental impact., • Documentation and Compliance: Create, review, and maintain technical drawings, specifications, and product documentation using a mix of CAD (SolidWorks preferred), MS Word, and digital images. Ensure designs and processes meet industry and regulatory standards, including internal engineering standards and product definition procedures., • Continuous Improvement: Apply problem-solving skills to identify areas of improvement in existing designs or manufacturing processes, making recommendations and providing solutions to enhance efficiency, quality, and cost-effectiveness., • Mathematical and Analytical Skills: Strong ability to apply engineering fundamentals, and statistical methods to create innovative, reliable, cost effective design solutions that translate into more design wins., • Design Skills: Strong knowledge of electromagnetic theory, magnetic circuit design, and magnetic material properties., • Analog Circuit Design: Working understanding of analog and digital electronics, signal integrity, power and thermal management is a plus. Simulation experience with LTspice or similar is a plus., • Problem Solving and Innovation: Excellent troubleshooting and critical thinking skills with the ability to propose innovative and creative solutions to complex design challenges., • Communication Skills: Strong verbal and written communication skills, with the ability to present technical information clearly to both technical and non-technical stakeholders for internal and external customers. Excellent interpersonal skills to work collaboratively across teams. Bilingual in English and Spanish is beneficial., • Adaptability: Ability to work on several projects at once and shift priorities as needed to meet company goals, • Attention to detail: High attention to detail with the ability to conduct rigorous reviews of designs, calculations, and test procedures to ensure compliance with specifications and quality standards., • Bachelor of Science degree in Engineering discipline required., • Bachelor’s or Master’s Degree in Electrical Engineering preferred, • 7+ years of related experience., • Working Knowledge of Military Specifications., • Experience in Military/Aerospace industry a plus. Work Environment: • This position operates in a mix of office, manufacturing, and lab-based environment., • Some travel may be required for process review at other manufacturing plants or supplier locations. Physical Demands: • Must be able to remain stationary during design and analysis sessions., • Having good manual dexterity and basic soldering / assembly skills to assist in building test and assembly fixtures is a plus., • Ability to lift and move up to 25 pounds of testing or prototyping equipment., • Frequent communication with cross-functional teams; ability to convey complex technical details clearly and effectively. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Growing company looking to add a SyteLine Developer to their team! This Jobot Job is hosted by: Melissa Todd Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $90,000 - $120,000 per year A bit about us: A global leader in the aerospace and defense industry, this organization specializes in providing engineered components, distribution services, and supply chain solutions to commercial and military aviation markets. With decades of experience, they partner closely with OEMs and airlines worldwide, delivering customized parts, advanced technologies, and aftermarket support to enhance performance, safety, and reliability. Their expertise spans everything from material distribution and design engineering to repair management and technical services, ensuring customers receive comprehensive, end-to-end solutions that keep aircraft fleets operating at peak efficiency. Why join us? • Upward mobility, • Positive work culture, • Competitive benefits Job Details Job Details: Our dynamic engineering firm is seeking a seasoned SyteLine Developer to join our team. This is a permanent position that offers a unique opportunity to work with cutting-edge technologies and contribute to innovative engineering solutions. The successful candidate will be responsible for programming, developing, and implementing applications and systems using SyteLine ERP. The role requires a deep understanding of VB.NET, T-SQL, HTML, and JavaScript. The ideal candidate will have 5+ years of experience in a similar role and a proven track record of success. Responsibilities: 1. Develop, maintain, and enhance SyteLine ERP applications and other business applications using VB.NET, T-SQL, HTML, and JavaScript., 2. Analyze user requirements and convert them into design documents., 3. Develop test plans, prepare test data, test, and document results., 4. Create and maintain documentation for code and system processes., 5. Work closely with other team members to integrate systems and solutions., 6. Troubleshoot and resolve system issues and bugs., 7. Provide technical support and training to end-users., 8. Work on multiple projects simultaneously and prioritize tasks based on business needs., 9. Stay updated with the latest industry trends and advancements in technology to ensure the company's technology infrastructure is at the forefront. Qualifications: 1. Bachelor's degree in Computer Science, Information Systems, or a related field., 2. A minimum of 5 years of experience in SyteLine development or a similar role., 3. Proficiency in VB.NET, T-SQL, HTML, and JavaScript., 4. Experience with SyteLine ERP system, including customization, configuration, and implementation., 5. Strong understanding of software development lifecycle (SDLC)., 6. Excellent problem-solving skills and attention to detail., 7. Ability to work independently and as part of a team., 8. Strong communication skills, both verbal and written., 9. Proven ability to manage multiple projects and meet deadlines., 10. A commitment to continuous professional development., 11. Knowledge of the engineering industry would be a plus. Join our team and be a part of a collaborative environment that encourages innovation and professional growth. This is an excellent opportunity for a SyteLine Developer who is passionate about technology and eager to make a significant impact in the engineering industry. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Olgoonik is an Equal Opportunity Employer.FPM Group, a multi-disciplined engineering, architecture, and environmental science consulting firm established in 1968, has an exciting opportunity in our Bohemia, NY and Oneida, NY offices.Work closely with architects and engineers in the development of co

The plant electrical and automation (E&A) engineer is a key technical expert in our highly automated manufacturing facility. Bachelor's degree in engineering, computer science, or related field (Preferred).

BS in Software Engineering, Computer Engineering, Computer Science or related field. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial mar

Job DescriptionElectronics Package Design Engineer Primary Skills - package layout, signal integrity, flip chip, bga, ceramic, multi-chip modules, electronics packaging, system in package, cadence Job Description Electronics Packaging Design Engineer We are seeking an experienced Electronics Packaging Design Engineer to join our team. In this role, you will lead the design of advanced packaging solutions including flip-chip BGA, ceramic packages, multi-chip modules (MCMs), and system-in-package (SiP) architectures. You’ll collaborate with cross-functional teams and suppliers to deliver reliable, manufacturable, and cost-effective designs. Responsibilities: • Design interconnects, substrate stack-ups, routing strategies, and package layouts., • Verify designs against electrical, thermal, mechanical, and manufacturability requirements., • Partner with suppliers and internal teams to align designs with process capabilities., • Support failure analysis and root-cause investigations., • Document design processes and lead reviews from concept to release., • Mentor junior engineers and support packaging technology roadmaps. Qualifications • Bachelor’s in Electrical Engineering, Materials Science, or related field., • 8+ years in IC/electronic packaging design., • Proficiency with Cadence Allegro or equivalent tools., • Expertise in advanced packaging (2.5D/3D, interposers, HBM, fan-out WLP, wire bond, flip chip, stacked die, ceramic co-fire, encapsulated modules/BGAs)., • Strong knowledge of substrate technologies and manufacturing processes. Why is This a Great Opportunity Well-established, stable company. Long-term projects featuring great technology. They are a great team of people to work with. Employees work 5 days per week onsite. They MAY let an outstanding candidate work from home a couple of days per week. no sponsorship. local candidates only, but might consider someone who is originally from Long Island Powered by JazzHR i7G47Nxmah