Trabajos field inspection en Plainview, New YorkCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

Quality Assurance Manager – Precision Gear & Machine Shop \n We are a highly regarded, AS9100-certified precision gear and machine shop specializing in the production of high-tolerance gears, components, and assemblies for aerospace\nand commercial applications. With a strong reputation for quality, precision, and on-time delivery, we serve top-tier customers in demanding industries where zero defects is the standard. \n We are seeking an experienced Quality Assurance Manager to lead our quality function and drive continuous improvement in a fast-paced, hands-on manufacturing environment. \n Key Responsibilities: \n\n • Oversee the development, implementation, and maintenance of our AS9100-certified Quality Management System (QMS), ensuring full compliance with aerospace standards, customer requirements, and regulatory mandates.\n, • Lead internal audits, manage external certification audits, and drive corrective/preventive actions (CAPA) to maintain and improve certification status.\n, • Supervise and mentor a team of quality inspectors, and technicians; provide training and performance management to foster a culture of quality excellence.\n, • Develop and implement quality control processes, inspection plans, and testing protocols for precision gears and machined components.\n, • Manage supplier quality assurance, including approval, monitoring, and performance evaluation.\n, • Analyze quality data, identify trends, and lead root cause analysis and continuous improvement initiatives (e.g., Lean, Six Sigma, PDCA).\n, • Serve as the primary point of contact for customer quality issues, audits, and concerns; ensure timely resolution and strong customer relationships.\n, • Collaborate closely with production, engineering, and leadership to integrate quality into every stage of the manufacturing process.\n, • Ensure accurate documentation, traceability, and reporting in line with aerospace requirements.\n, • Bachelor's degree in Engineering, Quality Management, or a related field (or equivalent experience).\n, • Minimum 8-10 years of progressive quality experience in aerospace manufacturing, with at least 5 years in a leadership role.\n, • Proven expertise in AS9100 (Rev D preferred) implementation, maintenance, and auditing; experience with NADCAP\n processes a strong plus.\n, • Strong knowledge of precision machining, gear manufacturing, GD&T, metrology, and inspection methods (CMM, optical comparators, etc.).\n, • Demonstrated success leading teams in a high-precision, low-volume production environment.\n, • Excellent problem-solving skills with experience in root cause analysis tools (8D, 5-Why, Fishbone).\n, • Proficient in quality software/tools (e.g., ERP, SPC, document control systems).\n, • Strong communication and leadership abilities; ability to thrive in a collaborative, team-oriented culture.\n, • Competitive salary commensurate with experience\n, • Comprehensive benefits package (health, 401(k) with match, paid time off)\n, • Opportunities for professional growth in a stable, growing company\n, • State-of-the-art facility with cutting-edge equipment\n

Job DescriptionAltus is a full-service fire and life safety services platform. We offer a complete suite of solutions, from the design, engineering, installation, and servicing of state-of-the-art fire and life safety systems to training, consulting, crisis management and business continuity services. Superior Pump & Motor, an Altus Fire & Life Safety Company, is looking for a Junior Pump Mechanic to join our team! We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our team members. Salary Range: $20.00/hr - $30.00/hrResponsibilities • Assist senior technicians with the installation, inspection, maintenance, and repair of pump systems and related equipment, • Perform basic mechanical and electrical troubleshooting under supervision, • •Support service calls, preventative maintenance, and emergency response work, • Maintain accurate service documentation and reports, • Follow all safety procedures and company standards, • Travel to job sites as requiredRequired Skills, • Mechanical or electrical experience in a related field (HVAC, electrical, industrial maintenance, automotive, controls, or similar), • Strong mechanical aptitude and problem-solving skills, • Ability to work with hand and power tools, • Willingness to learn pump systems, motors, and controls, • Valid driver’s license with a clean driving record, • Ability to lift equipment and work in industrial and field environments, • Preferred (Not Required):, • Trade school or technical training, • Experience with motors, controls, or troubleshooting electrical systems, • Basic understanding of piping systems

Job Description Lead Fleet Mechanic - Automotive and Machinery Location: Hempstead, NY (In-person, on-site at main facility; field work as needed across Long Island and NYC service areas) Employment Type: Full-Time, Non-Exempt (Hourly) Schedule: 40 hours per week standard (typically Monday through Friday, shop hours); overtime at time-and-a-half as needed for peak seasons, emergencies, or high demand Compensation: $35 to $45 per hour (based on experience, certifications, and skills) Join a stable, family-owned business with more than 65 years of trusted service in the irrigation and landscaping industry. With a fleet of about 80 vehicles and pieces of equipment (service trucks, light-duty vehicles, trailers, small engines, skid steers, loaders, pumps, and irrigation machinery), you will keep operations running smoothly for a team of 90 to 95 people. This hands-on lead position includes preventive maintenance, diagnostics, repairs, and the opportunity to perform in-house New York State vehicle inspections once the facility becomes a licensed inspection station. Key Responsibilities • Perform preventive maintenance, diagnostics, and repairs on a mixed fleet of gasoline and diesel trucks, vans, trailers, small engines, and landscaping/construction machinery., • Troubleshoot and fix mechanical, electrical, hydraulic, and drivetrain problems in both shop and field settings (including job-site repairs during busy seasons)., • Conduct independent diagnostics using scan tools, multimeters, pressure gauges, and OEM software., • Handle major repairs such as engine rebuilds, transmission work, hydraulic overhauls, and component replacements when required., • Prioritize and manage multiple breakdowns efficiently in a fast-paced, high-volume environment., • Keep accurate repair records, track parts inventory, and document work for compliance and efficiency., • Perform (or prepare to perform) New York State annual safety and emissions inspections on company vehicles once the facility is licensed as an inspection station., • Work independently with minimal supervision while coordinating with operations teams., • Maintain strict safety standards and company protocols on every job., • 5 or more years (10 or more years preferred) of hands-on experience as an automotive, fleet, or machinery mechanic., • Proven expertise with gasoline and diesel engines, hydraulic systems, electrical diagnostics (including CAN bus where applicable), and drivetrain repairs., • Valid New York State driver's license (clean record preferred)., • New York State Certified Motor Vehicle Inspector (Group 1/Safety Inspector) certification required (or ability and willingness to obtain promptly; company supports the process to become a licensed private fleet inspection station for internal efficiency)., • Strong problem-solving and diagnostic skills (real troubleshooting, not just parts swapping)., • Physical ability to lift heavy objects, work in varying outdoor conditions, and perform field repairs., • Experience with heavy equipment, construction machinery, skid steers/loaders, small engines, trucks/light vehicles, or irrigation-related equipment., • ASE certifications, CDL, welding/fabrication skills, or major component rebuild experience., • Familiarity with fleet maintenance in service industries (landscaping, irrigation, construction)., • Hourly pay of $35 to $45 based on experience, certifications, and skills., • Overtime at time-and-a-half during peak seasons, emergencies, or busy periods., • Employer-sponsored health insurance (partial contribution), dental (employee-paid), 401(k) with partial match, paid time off, and potential tool allowances or other perks., • Stable, year-round work in a long-standing family-owned business with a strong reputation., • Opportunity to grow into a lead role in a supportive, collaborative environment.

Job DescriptionLead Fleet Mechanic Automotive and Machinery Location: Hempstead, NY (In-person, on-site at main facility; field work as needed across Long Island and NYC service areas) Employment Type: Full-Time, Non-Exempt (Hourly) Schedule: 40 hours per week standard (typically Monday through Friday, shop hours); overtime at time-and-a-half as needed for peak seasons, emergencies, or high demand Compensation: $35 to $45 per hour (based on experience, certifications, and skills) Join a stable, family-owned business with more than 65 years of trusted service in the irrigation and landscaping industry. With a fleet of about 80 vehicles and pieces of equipment (service trucks, light-duty vehicles, trailers, small engines, skid steers, loaders, pumps, and irrigation machinery), you will keep operations running smoothly for a team of 90 to 95 people. This hands-on lead position includes preventive maintenance, diagnostics, repairs, and the opportunity to perform in-house New York State vehicle inspections once the facility becomes a licensed inspection station. Key Responsibilities • Perform preventive maintenance, diagnostics, and repairs on a mixed fleet of gasoline and diesel trucks, vans, trailers, small engines, and landscaping/construction machinery., • Troubleshoot and fix mechanical, electrical, hydraulic, and drivetrain problems in both shop and field settings (including job-site repairs during busy seasons)., • Conduct independent diagnostics using scan tools, multimeters, pressure gauges, and OEM software., • Handle major repairs such as engine rebuilds, transmission work, hydraulic overhauls, and component replacements when required., • Prioritize and manage multiple breakdowns efficiently in a fast-paced, high-volume environment., • Keep accurate repair records, track parts inventory, and document work for compliance and efficiency., • Perform (or prepare to perform) New York State annual safety and emissions inspections on company vehicles once the facility is licensed as an inspection station., • Work independently with minimal supervision while coordinating with operations teams., • Maintain strict safety standards and company protocols on every job., • Be available for overtime, emergency field repairs, and peak-season demands.Required Qualifications, • 5 or more years (10 or more years preferred) of hands-on experience as an automotive, fleet, or machinery mechanic., • Proven expertise with gasoline and diesel engines, hydraulic systems, electrical diagnostics (including CAN bus where applicable), and drivetrain repairs., • Valid New York State driver's license (clean record preferred)., • New York State Certified Motor Vehicle Inspector (Group 1/Safety Inspector) certification required (or ability and willingness to obtain promptly; company supports the process to become a licensed private fleet inspection station for internal efficiency)., • Strong problem-solving and diagnostic skills (real troubleshooting, not just parts swapping)., • Physical ability to lift heavy objects, work in varying outdoor conditions, and perform field repairs., • Reliable, punctual, safety-conscious, and organized with good communication skills for clear reporting.Preferred Qualifications, • Experience with heavy equipment, construction machinery, skid steers/loaders, small engines, trucks/light vehicles, or irrigation-related equipment., • ASE certifications, CDL, welding/fabrication skills, or major component rebuild experience., • Familiarity with fleet maintenance in service industries (landscaping, irrigation, construction)., • Comfort working on both vehicles and specialized machinery.What We Offer, • Hourly pay of $35 to $45 based on experience, certifications, and skills., • Overtime at time-and-a-half during peak seasons, emergencies, or busy periods., • Employer-sponsored health insurance (partial contribution), dental (employee-paid), 401(k) with partial match, paid time off, and potential tool allowances or other perks., • Stable, year-round work in a long-standing family-owned business with a strong reputation., • Opportunity to grow into a lead role in a supportive, collaborative environment.If you have the technical skills, leadership mindset, and drive to keep a large fleet and field teams moving reliably, apply today. This is a chance to make a direct impact in a respected, growing operation.

Job DescriptionDescription: About GenServe: GenServe is the nation’s leading independent provider of scheduled and emergency power generator maintenance, repair, and sales, primarily serving commercial customers. Established in 1990, GenServe has the largest team of EGSA-certified technicians in the Northeast and a growing presence across the U.S. Through a combination of organic growth and strategic acquisitions, GenServe is rapidly expanding its national footprint as a one-stop shop for generator solutions. Job Summary GenServe is looking for a skilled and experienced Generator Technician to join our field service team. In this role, you will independently perform scheduled maintenance, diagnostics, load banks, and repairs on a wide range of standby generator systems. You’ll work with diesel, natural gas, and propane-powered generators for commercial, industrial, and municipal clients. This position is ideal for technicians with a solid foundation in power generation and a desire to continue growing their technical and leadership skills. Key Responsibilities • Perform preventative maintenance and repair services on standby generator systems., • Independently diagnose mechanical and electrical faults using appropriate tools and technical documentation., • Troubleshoot engine and generator system components include batteries, starters, alternators, fuel systems, and control panels., • Complete load bank testing and inspections to ensure generator performance., • Maintain accurate service records, inspection reports, and parts usage documentation using company systems., • Some exposure to ATS (Automatic Transfer Switches) with supervision., • Ensure all work complies with GenServe safety standards and customer site protocols., • Provide support and guidance to Gen Tech 1’s as needed., • Attend internal and external training as needed to further your knowledge and experience., • High school diploma or GED required., • Technical training or certifications in diesel engines, generator systems, or electrical systems preferred., • Minimum of 2 years’ hands-on experience servicing commercial or industrial generator systems., • Valid driver’s license with a clean driving record., • Physically able to lift 50+ lbs and work in field/outdoor conditions., • Proficiency in using diagnostic tools, multimeters, and load banks., • Must perform all duties and responsibilities of a Level 1 Technician., • Strong mechanical and electrical troubleshooting skills., • Excellent customer service and communication abilities., • Ability to read and interpret wiring diagrams, schematics, and service manuals., • Self-motivated with strong problem-solving and organizational skills. Generator Technician at GenServe are on a clear path toward becoming a Generator Technician Level 5. GenServe supports advancement through paid training, OEM certifications, and OJT. Why GenServe? • Competitive compensation and benefits, • Consistent year-round work, • Industry-leading safety and technical training, • Advancement opportunities in a growing company, • Supportive, team-oriented work culture, • Technician Appreciation Days

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate has minimum of 4-8 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities include, but are not limited to: • Manage projects, staff and clients., • Work with multi-disciplinary teams on tasks such as work zone traffic, intersection design, traffic signal design, roadway signing and pavement marking plans, DOT access permitting, control plans and traffic signal operations analysis., • Assist in the preparation specifications, plans, construction schedules, impact studies, permits, and designs for projects., • Assist with traffic/parking studies, corridor planning, feasibility studies, and safety audits., • Bachelor’s Degree in Civil Engineering, • Professional Engineering (PE) license in NY required (or ability to obtain within first 6 months), • Professional Traffic Operations Engineer (PTOE) desirable, • Excellent oral and written communication skills, • Experience with design standards, NYSDOT/NYCDOT/CTDOT/NJDOT experience (desirable), • Knowledge of CADD Software (MicroStation or AutoCAD), • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for, for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public and are dedicated to Moving Forward Together.

Job Description Construction Superintendent Location: NYC & Long Island Project Type: Commercial & Retail Interior Fit-Out Role Overview Seeking an experienced Construction Superintendent to manage day-to-day field operations on commercial and retail interior fit-out projects across NYC and Long Island. Responsible for on-site execution, safety, scheduling, and subcontractor coordination from start through close-out. Responsibilities • Oversee daily on-site construction activities and trade coordination, • Drive project schedules in fast-track interior environments, • Enforce OSHA, NYC DOB, and site safety requirements, • Perform daily site walks and quality control checks, • Coordinate inspections and manage site logistics, • Track progress, maintain daily reports, and support punch-list/close-out, • 5+ years Superintendent experience on commercial or retail interior projects, • Strong knowledge of urban construction and inspection processes, • Proven ability to manage multiple subcontractors, • Ability to read and interpret construction drawings, • OSHA 30 required (SST preferred), • Procore or similar software experience Compensation • Competitive salary, • Bonus scheme, • Medical, dental, vision, • 401k match, • PTO, • 6-month performance reviews, • Life Insurance, • Disability insurance

Job DescriptionDescription: JOB TITLE: Machinist/Programmer Job Summary: We are seeking a skilled Machinist/Programmer to join our team. The ideal candidate will have experience operating and programming CNC machines to produce precision parts. You will be responsible for reading blueprints, setting up machines, programming CNC controls and inspecting parts to ensure they meet specifications. Perform the activities of an expert level CNC programmer and shop leader to machine, program, estimate, and coordinate various products per established facility processes, including set-up, fabrication, and inspection using the operations of CNC mills, lathes, and other equipment. Perform as a key contributor for the new knowledge of programs and projects. Apply knowledge of policies, procedures, and the practical application of general and specific technical aspects of the job to complete varied and complex work. Make recommendations for new procedures. Work independently in established procedures and practices. Lead tasks and mentor others. Due to the nature of work performed within this facility, U.S. citizenship is required. Key Responsibilities: · Program set up, and operate CNC machines (lathes, mills, or grinders) to produce parts according to specifications. · Interpret blueprints, engineering drawings, and CAD models to develop and modify CNC programs. · Select and install appropriate tools, fixtures, and materials for each job. · Perform machine maintenance and troubleshooting to ensure optimal performance. · Inspect finished parts using precision measuring instruments to verify conformance to specifications. · Collaborate with engineering and production teams to optimize machining processes and improve efficiency. · Maintain a clean and safe work environment, adhering to company safety policies and procedures. · Continuously monitor machine operations to detect malfunctions or deviations from specifications. Required Qualifications: · High school diploma or equivalent; technical degree or certification in machining, CNC programming, or a related field is preferred. · Proven experience as a Machinist/Programmer, with a strong background in CNC programming and machine operation. · Proficiency in reading and interpreting blueprints, technical drawings, and CAD models. · Experience with various CNC controls (e.g., Fanuc, Haas, Siemens). · Strong knowledge of machining principles, materials, and cutting tools. · Excellent problem-solving skills and attention to detail. · Ability to work independently and as part of a team in a fast-paced environment. · Good communication skills and a commitment to quality and safety. · Ability to lift and carry up to 30lbs. · Comfortable working in a manufacturing environment with exposure to noise, dust and other industrial elements. · 10 years of experience with programming in computer-aided manufacturing (CAM) software and machining and fabrication principles · 10 years of experience with CNC and manual machinery operations · 5 years of experience with using Mastercam and programing and executing 4th and 5th axis machining operations · 3+ years of experience with estimating CNC machining work and jobs · Ability to review engineering drawings for completeness and interpret geometric dimensioning and tolerancing (GD&T) · Ability to inspect and verify all products by using standard inspection equipment and techniques/CMM (Coordinate Measuring Machine) · Ability to set up and operate manual machine shop equipment, including lathes, milling machines, saws, and power tools · Ability to pay strict attention to detail in a manufacturing environment Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description ???? Position Summary We are seeking an experienced and results-driven Director of Operations to lead and optimize manufacturing, printing, and packaging operations across our facility. This role is responsible for overseeing end-to-end production activities—ensuring efficiency, quality, and timely delivery of products while fostering a culture of continuous improvement and safety. The ideal candidate is a strategic thinker and hands-on leader who thrives in a dynamic, short-run, custom manufacturing environment. ????️ Key Responsibilities • Direct and oversee all aspects of operations, including:, • Production, • Printing & art coordination, • Scheduling, • Machinery and equipment, • Process engineering, • Facility maintenance, • Wrapping & packaging, • Shipping and warehousing, • Ensure optimal manufacturing scheduling and material resource planning., • Lead operational initiatives to meet quality, efficiency, cost, and delivery requirements., • Drive process improvements to maximize equipment yield and reduce downtime., • Manage and resolve manufacturing or printing process issues by identifying root causes., • Lead capital projects, new product introductions, and reengineering efforts., • Promote cost-reduction strategies through materials and process optimization., • Maintain adherence to GMP and compliance regulations., • Recruit, train, develop, and manage a high-performing operations team., • Cultivate a culture of continuous improvement and lean manufacturing., • Keep abreast of new technologies and implement innovative manufacturing solutions., • Ensure a safe and compliant workplace through training, inspection, and proactive leadership:, • Conduct Job Safety Analyses, regular safety inspections, and safety meetings, • Investigate all incidents promptly and maintain detailed reports, • Coordinate return-to-work programs and job modifications as needed, • Enforce safety policies, use of PPE, and OSHA compliance measures, • Bachelor's Degree in Manufacturing, Engineering, Business, or related field (MBA a plus), • 15+ years of leadership experience in manufacturing or printing operations, • Experience in short-run, custom, and time-sensitive manufacturing environments, • Strong background in scheduling, MRP systems, and quoting new business opportunities, • Formal training in Lean Manufacturing and/or Six Sigma (preferred), • Proven success in improving operational efficiency and reducing costs, • Strong organizational, analytical, and project management skills, • Entrepreneurial mindset with a hands-on, executive leadership approach, • Excellent verbal and written communication skills

Job DescriptionCompany Description SOCOTEC is a provider of niche consulting services within the architecture, engineering and construction industries focusing on high-performance buildings and specialty structures. Through an integrated, holistic approach, our professionals provide solutions for building envelope, energy efficiency, sustainability, code advisory and construction advisory projects. SOCOTEC’s combination of expertise, experience and methods are increasingly recognized as best-in-class fueling significant growth. Future Tech Consultants of NY (FTC), a SOCOTEC Company, located in Mineola, NY is a Comprehensive Engineering, Inspection and Testing Company that has earned a highly regarded reputation for professionalism and reliability in the construction industry. FTC is owned and operated by Professional Engineers with over 50 years of inspection and testing experience. In business since 1994, we offer an impressive benefits and compensation package. SOCOTEC is proud to announce that it has been officially certified as a Great Place to Work by the renowned global authority on workplace culture, Great Place to Work®. Job Description We are currently seeking a Dispatcher/Scheduler with or without experience in Inspection scheduling to conduct the deployment and routing of 50+ field inspectors daily. The ideal candidate must be self-motivated, energetic, and responsible. Opportunities to advance for those with an ambition to do so and are eager to learn. • Work with the Dispatch Team to ensure compliance of work instructions to the field employees in order to provide an efficient and productive work environment,, • Provide optimum customer service to clients and accurate records of job status updates., • This position is responsible for directing/scheduling field inspectors as well as daily communication with our clients., • Dispatch work orders and details to inspectors daily thru phone call and email, • Provide updates and follow up on jobs for numerous construction projects, • Monitoring inspectors, handling paperwork, entering correct information into the systemQualifications, • Proficient in MS Office/computer literate, • Ability to work in a fast-paced environment, • Must be customer focused and team orientated, • Proactive, self-starter, problem solver, • Ability to work with clients, operational staff, field and management, • Strong interpersonal skills, • Ability to handle multiple tasks concurrently, • Ability to prioritize while keeping an eye on detail, • Exceptional organizational skills, • Knowledge of NYC and the 5 boroughs a MUST Additional Information For more information, please visit Your information will be kept confidential according to EEO guidelines. Salary Range: $50K-60K SOCOTEC is an Equal Opportunity Employer.

Job DescriptionDescription: Director of Quality Cox & Company, Inc. is seeking an outgoing and experienced Director of Quality to lead the development and implementation of our quality management system. This key senior role is vital in ensuring that our products and services consistently meet company standards, regulatory requirements, and customer expectations. The successful candidate will oversee quality teams and collaborate across departments to establish and maintain a culture of quality and compliance throughout the organization. Key Responsibilities • Develop, implement, and maintain the company’s quality management system in accordance with industry standards and regulatory requirements., • Lead and oversee quality assurance teams, providing guidance, training, and performance evaluations., • Collaborate with cross-functional departments such as production, engineering, and customer service to ensure quality and compliance are integrated into all processes., • Conduct audits, inspections, and reviews to identify areas for improvement and ensure adherence to quality standards., • Analyze quality data and metrics to identify trends, root causes, and implement corrective and preventive actions., • Stay current with industry regulations and standards, ensuring the company’s quality practices remain compliant., • Foster a culture of continuous improvement and quality awareness across the organization. Skills and Qualifications • Strong knowledge of quality standards and regulatory requirements relevant to the industry., • Excellent leadership, communication, and interpersonal skills., • Ability to analyze data, identify issues, and implement effective solutions., • Experience with quality management systems, audits, and process improvement methodologies., • Strong organizational skills and attention to detail. At Cox & Company, Inc., we value innovation, integrity, and teamwork. We offer a dynamic work environment with opportunities for professional growth and development. Join us in our commitment to delivering high-quality products and services that meet the highest standards of excellence. Requirements: Role and Responsibilities • Direct a staff of up to 25 people including engineers, technicians, inspectors, engineers and administrative personnel. Hire staff and provide training., • Develop and enforce quality systems to ensure compliance to consensus standards and customer requirements., • Monitor and communicate measurement of quality-related metrics to senior staff and advocate for improvements., • Communicate with customers regarding Quality compliance, complaints, audits, etc., • Collaborate with Purchasing on monitoring and improving vendor performance., • Drive continuous improvement initiatives to reduce waste, improve efficiency and drive a quality culture., • Education – Bachelor’s degree in a technical or management related field., • 10 years minimum experience in a direct QA role with progressive advancement into supervisory and managerial roles., • Ability to follow detailed written and verbal instructions in English., • Ability to work with minimal supervision in a high paced development environment., • Ability to direct and manage a department of up to 25 employees., • Knowledge of manufacturing and inspection processes and data systems., • Ability to interact at all levels of the organization, with customers and regulatory bodies in writing, verbally and in person, • Ability to type documents from drafts and markups., • Competitive salary, • Health, dental, and vision insurance, • 401(k) with company match

Job DescriptionSignature is looking to add a Field Consultant to cover the following counties in NY: Kings, Nassau, Suffolk Are you looking for a new career that allows you to work independently, is flexible, and challenging everyday, then we have a new and exciting career for you! For 30 years, Signature Companies () has been the industry leader and innovator in providing quality, professional and unparalleled service to our client partners. At Signature Companies we are a High Value Insurance information provider, dedicated to superior customer service, superior quality, and superior time service. Signature Companies is looking for self-starting, self-motivated and self-directed independent contractors (1099) who are creative and knowledgeable in their field and who possess an entrepreneurial spirit to work an area of their choosing, around the area in which they live. We can provide a supplement to your current income or become your main source of income. Experience in Insurance Adjusting, Home Appraisals, Real Estate or Construction is a plus. Experience using Rapid Sketch, Xactimate, CAD or other diagramming programs will be helpful. As a Field Consultant, you will be responsible for scheduling and conducting on-site High Value Property Surveys. This involves coordinating and completing surveys within your own schedule, managing work assignments you accept and timely completion of web-based reports. You will visit properties, take photos and measurements, and make note of issues which should be brought to the underwriter’s attention. Our experienced and dedicated Field Management team will provide mentoring and support to help you learn and excel at Signature Companies. Details of position: • Work from your home office., • Professionally interact over the phone, via email, and in-person with homeowners and insurance agents., • Drive to and conduct on-site property surveys on high value homes as per customer specific guidelines and procedures., • Identify and document the construction materials/characteristics and unique features of the home., • Obtain measurements of the home and other structures on the property., • Generate an estimated replacement value of the home and identify major hazards., • Communicate the information gathered during on-site inspection in loss control 360 accessed through the Signature website RequirementsRequirements and Tools needed: • Prior underwriting experience is desirable., • Prior inspection experience on residential homes is desirable., • Loss control experience desirable., • Strong oral and written communication skills, • Professionalism is key., • Construction experience desired, but not required., • BA or BS degree desired, but not required., • Must have smartphone, tablet and personal computer., • A late model reliable vehicle and Auto and General Liability Insurance., • High speed internet, Digital Camera or Smart phone with 16mp camera or greater, measuring devices such as: laser, soft tape measure, or measuring wheel.

Job Description Job Summary We are seeking a dedicated and detail-oriented Environmental Scientist to join our team. The ideal candidate will be responsible for conducting scientific research, collecting and analyzing environmental data, and supporting project development through technical expertise. This role offers an exciting opportunity to contribute to environmental conservation and sustainable practices, utilizing advanced GIS tools, laboratory techniques, and data analysis skills. The position is full-time and involves collaboration across various environmental projects, ensuring compliance with regulations and promoting ecological health. Duties • Performs routine and complex field inspections and studies of sites proposed for investigation including topography, sensitive environmental receptors and exposed geological formations that may have a bearing on the proposed investigation., • Provides technical supervision on the collection and interpretation of field data., • Coordinates the full time inspection of geotechnical and hydrogeological site investigations including the supervision of technicians, Environmental Scientist I, drill crews, tank removals and/or the study of pertinent geological data and applicable surface formations., • Performs geological literature searches and routine and complex analyses. Evaluate the impact on geological formations involved in the excavation of tanks and subsurface investigations., • Evaluates both routine and complex laboratory and boring data and samples, generates geologic profile rock profiles and prepares data for the inclusion in reports., • Composes routine and complex hydrogeological reports based on approved workplans including any required recommendations on some routine projects for the approval of a senior scientist, • Prepares proposals on routine and complex projects., • Supervises the development of the scope of subsurface investigations, geological assessments and other special field or laboratory tests. Assesses the physical and chemical properties of soil and rock formations and other pertinent hydrogeologic conditions., • Oversees and implements remedial pilot testing, • Education – Bachelor’s degree in Environmental Engineering, Geology, Environmental Science, or related discipline., • Experience - 3+ years in environmental science within consulting or remediation., • Proficiency - Competent in Microsoft Office, Adobe Acrobat, and ability to work with computerized database searches., • Technical Knowledge – Proficiency in environmental site assessments, remediation technologies, Phase I/II ESAs, hydrogeology, compliance auditing., • Certifications – OSHA 40-hour HAZWOPER (required), Asbestos/Lead/Mold Certifications, CPR certification, valid driver’s license.Company DescriptionTrusted since 2002, Metro Environmental Services (MES) is an industry-leading environmental and construction organization. We offer full-service solutions for clients who store, consume, or sell petroleum products from Delaware to Massachusetts. Our services include: Pump and Tank Construction | Environmental Remediation | General Construction | Fuel Facility Maintenance | Tank and Line Testing | Environmental Compliance and Engineering | Groundwater Sampling and Soil Boring We have many long-term employees; however, due to our success and growth, we are seeking candidates for many new opportunities. This is an exciting, thriving Company with a proven track record. Come join us!Trusted since 2002, Metro Environmental Services (MES) is an industry-leading environmental and construction organization. We offer full-service solutions for clients who store, consume, or sell petroleum products from Delaware to Massachusetts. Our services include:\r\n\r\nPump and Tank Construction | Environmental Remediation | General Construction | Fuel Facility Maintenance | Tank and Line Testing | Environmental Compliance and Engineering | Groundwater Sampling and Soil Boring\r\n\r\nWe have many long-term employees; however, due to our success and growth, we are seeking candidates for many new opportunities. This is an exciting, thriving Company with a proven track record. Come join us!

Job Description Apply HERE OnlyMortgage Field Services Inspector (Independent Contractor) FAR Inspections is a leading provider of property data for mortgage lenders nationwide. Based in Reno, NV, we have a 12-year track record of excellence and stability in the mortgage field services industry. We partner with highly motivated independent contractors who prioritize accuracy, reliability, and professional autonomy. The Opportunity Earn a predictable supplemental or full-time income on a flexible schedule that you control. As a Field Inspector, you will perform residential occupancy verifications. These are brief, exterior visits to confirm property status and report on general conditions. • Autonomy: You manage your own routing, schedule, and territory., • Efficiency: Standard inspections are designed for speed, typically requiring only 5–6 minutes on-site., • Consistency: Enjoy stable, month-to-month volume in your assigned county.Workflow & Responsibilities, • Determine property occupancy status based on industry-standard indicators., • Capture 9+ photos and submit brief reports using industry-standard mobile applications., • Reliable, fuel-efficient vehicle., • Smartphone (Android or iPhone) capable of running mobile reporting apps., • Computer with an internet connection and a printer., • Ability to pass a standard background check., • Strong time-management skills to meet deadlines without direct supervision.Earnings & Volume, • Flat-Rate Pay: This is a 1099 position where you are paid a set fee for every inspection completed., • Earning Potential: While pay is per-inspection, efficient contractors typically earn the equivalent of $25-$35 per hour., • Volume: Rates and inspection volume vary by county. Lower volume counties typically feature higher per-inspection rates, while higher volume counties offer more consistent daily work. Apply HERE Only

Job Description Why are you interested? This is an exciting opportunity for an ambitious, experienced property damage consultant to join our Long Island office in Wantagh, New York. Candidates will find this position has a healthy balance of autonomy and support, while working alongside construction experts under an industry leading brand. Who is DBI? Founded in 2002, the DBI team specializes in the evaluation of damaged structures. DBI’s construction experts provide independent recommendations and analysis to clients in the insurance and legal industries. In a complex industry, the company’s mission is to bring clarity to every client served by DBI through hard evidence, expertise, and accuracy. What is the role? The Project Manager II is responsible for ensuring the timely and costly completion of building consulting projects by overseeing all phases. The Project Manager II will accurately evaluate damaged structures and compile a scope of repair, as well as cost projections. The position will be based out of our Long Island office, with a starting salary range of $90,000-$140,000 plus semi-annual bonus potential and benefits package. PRIMARY JOB RESPONSIBILITIES: Project Manager • Develop detailed budgets, estimates, and proposals across lump sum, unit rate, and cost-plus formats, • Manage project timelines, schedules, and resource allocation to meet delivery commitments, • Organize project teams and maintain effective relationships with staff, consultants, and clients, • Identify risk exposures and resolve complex technical issues as they arise, • Enforce department standards for deliverables, budget tracking, and project documentation, • Ensure the flow of project information is maintained and documented, • Perform all other duties as assigned DBI • Consistently demonstrate professionalism, integrity and the highest standards of ethical behavior, • Conducts daily work and interactions in a way that aligns with the organization’s values, • Maintain the confidentiality of proprietary and sensitive information, exercising sound judgment and discretion, • Commit to continuous improvement and professional development for self and team members REQUIRED QUALIFICATIONS • Bachelor’s degree in Architecture, Construction Management, Engineering or related field preferred, • Minimum Five (5) years of experience within construction, restoration, and/or property insurance related fields, • Ability to travel and build comradery with a response team. Willingness to travel +/- 25% of the workweek, • Desire to work in a fast-paced, in-person environment., • Experience working with Xactimate, RS Means, Bluebeam Revu, Primavera and MS Projects preferred, • Possess a valid driver’s license and a satisfactory driving record SKILLS AND ABILITIES • Motivated, detail oriented, and ready to take on challenges, • Strong verbal and written communication skills, • Microsoft Office suite, especially Excel, • Ability to observe issues and suggest innovative solutions, • Self-directed with the ability to be an effective team leader and maintain a professional demeanor, • Proven organizational skills with exemplary time management, • Technically astute and strong problem-solving skills, • Ability to work in inclement weather and various environmental conditions WORKING CONDITIONS: Our business requires work to be performed at the site of the property damage, including locations where disasters or catastrophes have previously occurred. This team member may be required to work in elevated areas such as roofs or scaffolding, requiring physical agility, and balance. During busy periods, this may require evening, overnight, and/or weekend travel and work. Our teams are provided with safety gear and PPE as they may be subject to, but not limited to: outdoor extreme heat, cold, and precipitation; indoor noise, vibrations, proximity to moving mechanical parts, electrical current, chemicals, fumes, odors, dusts, mists, gases, or poor ventilation. This team member may be required to work in close quarters, crawl spaces, small enclosed rooms, narrow aisles, passageways, or other enclosed areas, requiring physical agility and resistance to claustrophobia. PHYSICAL ACTIVITIES AND REQUIREMENTS: The team member may be required to climb, balance, stoop, kneel, crouch, crawl, reach, stand, walk, push, pull, lift, finger, grasp, or feel, especially in the course of investigating and assessing property damage; these requirements may include the need to lift weights of up to 50 pounds, including a ladder. The work requires close visual acuity, with or without correction, to prepare reports containing words, symbols, and numerical figures; the incumbent is required to view a computer terminal, use a keyboard, read printed documents, make detailed visual inspections, perceive color, perceive depth, and have a sufficient field of vision to carry out all inspection and related duties. Company DescriptionWe evaluate damaged structures. As construction experts, we provide independent recommendations and analyses for clients around the world in the insurance and legal industries. We have a national presence with offices from coast to coast and a robust set of specialized, in-house practices that range from scheduling and building envelope to mechanical, electrical, elevator, and landscaping. Hard evidence, expertise, and accuracy drive our work; communication and connection are our top priorities. Simply put, our work empowers our clients to move forward with confidence. In a complex industry, our mission is to bring clarity to every client we serve.We evaluate damaged structures. As construction experts, we provide independent recommendations and analyses for clients around the world in the insurance and legal industries. We have a national presence with offices from coast to coast and a robust set of specialized, in-house practices that range from scheduling and building envelope to mechanical, electrical, elevator, and landscaping. Hard evidence, expertise, and accuracy drive our work; communication and connection are our top priorities. Simply put, our work empowers our clients to move forward with confidence. In a complex industry, our mission is to bring clarity to every client we serve.

Job DescriptionCompany Description SOCOTEC is a provider of niche consulting services within the architecture, engineering and construction industries focusing on high-performance buildings and specialty structures. Through an integrated, holistic approach, our professionals provide solutions for building envelope, energy efficiency, sustainability, code advisory and construction advisory projects SOCOTEC’s combination of expertise, experience and methods are increasingly recognized as best-in-class fueling significant growth. SOCOTEC is proud to announce that it has been officially certified as a Great Place to Work by the renowned global authority on workplace culture, Great Place to Work®. Job Description FTC has immediate opportunities for experienced Special Inspectors and Field Engineers to be part of our team. • Complete assigned inspection as scheduled by dispatch, • Perform scheduled inspection during the time assigned – inspect, review and submit reports according to NYS DOB code and approved drawings, • Usual schedule is 7am-3:30pm, • Perform all other duties as assigned by your supervisor or manager.Qualifications, • NYS PE, Civil or Mechanical Engineering Degree with field experience, • Ideal candidates must hold certifications from ICC, AWS, NICET and/or ACI including:, • ICC Commercial or Residential Certification required., • Technical, Associate’s, or Bachelor’s Degree pertaining to the Engineering field (Civil, Mechanical, Environmental, etc.) a plus., • Candidates must be familiar with the New York City Building Code, • Ability to read prints and find inspection locations, • Ability to produce inspection reports according to company standards, • Must be proficient in Microsoft Word, Excel, and Outlook., • Reliable means of transportation necessary., • Extensive knowledge of industry standards, • Must be punctual, reliable with good attention to detail, • Ability to work various shifts, • Ability to travel numerous job sites daily, • Highly motivated team player with a strong work ethic, • Able to communicate effectively with a variety of project managers, • Prepare and electronically submit daily reports, • Organized and efficient, • Authorized to work in the U.S with a valid driver license Additional Information FTC/SOCOTEC offers a competitive benefits package and an exciting & inclusive company culture where we foster learning and growth through our mentorship program, continuing education support, and other initiatives. For more information, please visit or ftcny.com Hourly rate: $20/hr-$55/hr FTC/SOCOTEC is an Equal Opportunity Employer. SOCOTEC is an Equal Opportunity Employer. SOCOTEC is an Equal Opportunity Employer.

Job DescriptionCompany Description SOCOTEC is a provider of niche consulting services within the architecture, engineering and construction industries focusing on high-performance buildings and specialty structures. Through an integrated, holistic approach, our professionals provide solutions for building envelope, energy efficiency, sustainability, code advisory and construction advisory projects SOCOTEC’s combination of expertise, experience and methods are increasingly recognized as best-in-class fueling significant growth. SOCOTEC is proud to announce that it has been officially certified as a Great Place to Work by the renowned global authority on workplace culture, Great Place to Work®. Job Description The Field Operations Project Manager will oversee and coordinate construction materials testing and special inspection services for multiple projects within assigned territories. This role requires strong technical knowledge, exceptional organizational skills, and the ability to manage field personnel while ensuring compliance with industry standards and client requirements. Key Responsibilities: Project Management • Plan, coordinate, and oversee field testing and inspection activities across multiple construction sites, • Manage project schedules, budgets, and resource allocation to ensure timely delivery of services, • Serve as primary point of contact for clients, contractors, and internal teams, • Prepare project scope of work and cost estimates for specialty work when needed, • Ensure testing and inspection services comply with applicable codes, standards, and specifications (ACI, ASTM, IBC, etc.), • Review technical reports prepared by field technicians and inspectors, • Provide technical guidance and support to field personnel, • Conduct quality control reviews of field operations and testing procedures, • Supervise, mentor, and evaluate field technicians and inspectors, • Coordinate staffing assignments and maintain adequate coverage across all active projects, • Conduct performance reviews and identify training needs, • Maintain strong relationships with clients, architects, engineers, and contractors, • Address client concerns and resolve issues promptly and professionally, • Identify opportunities for additional services and business development, • Ensure strict adherence to company safety policies and OSHA regulations, • Complete all duties as assigned by your managerQualifications Education and Experience • Minimum 5-7 years of experience in construction materials testing and special inspections, • ACI Concrete Field Testing Technician - Grade I (required), • ICC Special Inspector certifications (Structural Steel, Concrete, Masonry) preferred, • NICET certification in Construction Materials Testing or related discipline preferred, • Thorough understanding of construction materials, testing procedures, and quality control principles, • Proficiency in relevant codes and standards (IBC, ACI 318, ASTM, etc.), • Strong knowledge of concrete, soils, asphalt, structural steel, and masonry testing, • Excellent organizational and time management abilities, • Strong verbal and written communication skills, • Proven leadership and team-building capabilities, • Analytical thinking and problem-solving skills, • Ability to work independently and make sound decisions, • Position requires frequent travel to construction sites within assigned territory, • Must be able to work in outdoor environments and various weather conditions, • Flexibility to work extended hours, weekends, or emergency calls as needed, • Physical requirements include walking construction sites, climbing stairs/ladders, and lifting up to 50 pounds Additional Information SOCOTEC offers a competitive benefits package and an exciting & inclusive company culture where we foster learning and growth through our mentorship program, continuing education support, and other initiatives. For more information, please visit Job Type: Full-Time Your information will be kept confidential according to EEO guidelines. SOCOTEC is an Equal Opportunity Employer. SOCOTEC is an Equal Opportunity Employer.

Job DescriptionPOSITION SUMMARYUnder medical supervision, provides medical and pelvic examinations for the purpose of assessing general health and eligibility for contraception; to ascertain pregnancy; and to ascertain the need for and provide therapeutic assistance for a determined range of infections and disorders. Provides educational and training services to staff and clients. This is a full time APC Floating position working 3 days a week in Massapequa and 2 days in Hempstead. Working on Saturdays is required. ESSENTIAL JOB DUTIES AND RESPONSIBILITIESAdministrative (10%):•Participates in department and interdisciplinary committees which affect policies related to the role of the Advance Practice Clinician and delivery of health care to the customer.•Participates in agency quality risk management program. Under the direction of the regional VP and the physician leadership, implements overall quality assurance activities at the health centers•Responds with other staff to community needs by participating in educational efforts.•As required by law, participates in Collaborative Agreement with Medical Director or another designated Physician.•Accepts individual and joint responsibility for and participates in health care center efforts to comply with all organizational and quality guidelines and all pertinent government regulations.•Understands and commits to customer satisfaction approach to health care delivery.•Accepts individual and joint responsibility for and participates in overall health care center efforts to achieve all goals set to improve customer relations, increase customer satisfaction and promote repeat customer visits.•Complete all responsibilities according to established protocols, policies and standard practices in the areas of ADA and regulatory compliance programs such as HIPAA.•Works effectively with volunteers, trainees and temp agency personnel.•Performs other educational and experience related duties as required.•Adhere to affiliate goals, policies and standards of conduct in terms of professionalism. Assist center staff in achieving time efficient family planning visits as well as answering phones professionally.•Familiar with health center emergency procedures and responds appropriately.•Monitors and ensures compliance with OSHA, CLIA and State procedures, policies and regulations.•Prepares medical incident / occurrence reports as needed.•Travel: While performing the duties of this job, the employee may have to travel toother work locations at various times. Own transportation is required, with a valid driver’s license, inspection, registration and adequate insurance. Direct Clinical Care: (80%)•Responsible for assessing, planning and administering health care which is individualized to the patient and consistent with the policies and protocols of PPFA and PPGNY.•Secures a complete health history and performs physical examinations with special emphasis on the reproductive health care, and other types of more specialized reproductive care including abortion care, and transgender hormone therapy.•Provides medications and contraceptive devices as needed.•Monitors medical aspects of all medical services offered at the health center, acting as a resource to center staff and patients regarding medical concerns.•Performs, orders and interprets appropriate laboratory tests.•Provides education and appropriate management for women and men in need of reproductive related services, including fertility control, infertility, and sexually transmitted infections.•Assesses and manages gynecological conditions and provides treatment consistent with PPGNY protocols, policies, and procedures.•Ensures appropriate medical follow-up on all patient testing and/or treatment, including direct patient contacts and laboratory test review.•Create & maintain medical documentation in an EHR system in compliance with EHR policies and procedures.•Provides postpartum care in selected settings within an interdisciplinary team framework with appropriate pre-service and in-service education.•Seeks consultations as necessary from Medical Director or designee.•Collaborates with physicians and other members of the health care team and makes referrals to medical and community resources as indicated. Training: (10%)•At the discretion and direction of the Clinical Director, AVP of clinical implementation and or Medical Director, assists in training and orientation for newly hired APC’s and new skill development.•At the discretion and direction of the health center management, assists in training and orientation for newly hired clinical support staff.•Attends agency sponsored staff meetings, medical in-services and trainings. CORE COMPETENCIES•A demonstrated commitment to PPGNY’s mission related to bodily autonomy, health equity, and gender and racial justice.•A demonstrated commitment to learning about and enhancing practices related to racial equity and its impact on healthcare systems.•Strong relationship building and communication skills, including an ability to work and build trust across cultural differences related to related to race, class, age, gender, gender identity and expression, sexual orientation, religion, ethnicity, national origin or ability; and to reflect on one’s personal identity with humility.•Ability to provide compassionate, non-judgmental and culturally responsive care across race, class, age, gender, gender identity and expression, sexual orientation, religion, ethnicity, national origin or ability; and demonstrates deep sense of accountability to patient experience. REQUIRED SKILLS/ABILITIES: Interpersonal•Excellent customer service and communication skills•Ability to remain focused and calm in stressful situations.•Excellent interpersonal and verbal skills•Superior oral and written communication skills•Ability to develop and maintain effective, professional relationships with internal and external stakeholders.•Ability to work effectively as part of team. Technical•Proficient in Microsoft Office Suite or similar software•Proficient and high degree of comfort with EMR system•Bilingual in Spanish preferredSubject Matter Knowledge•Comprehensive knowledge of sexual reproductive care•Preferred Experience working with LGBTQ and Transgender populationsWork Habits/Attributes•Keen attention to detail•Outstanding time management skills, including the ability to work under deadline.•The ability to produce high quality work in a fast-paced environment with changing and/or competing priorities.•Ability to exercise sound judgment and independent decision-making skills.•Ability to produce reliable, high-quality work with minimal direct supervision.•Ability to exercise discretion in the handling of confidential information.•Ability to demonstrate and document evidence-based clinical judgment.•Ability to make strategic decisions.•Superior negotiation skills•Ability to work a flexible or extended schedule, including evenings and weekends, as operational demands require.•Well-developed problem-solving and critical thinking skills•Ability to build and lead high-performing teams.•Comfort making sound strategic decisions in the face of uncertain or incomplete information REQUIRED QUALIFICATIONSMinimum education•Graduation from a formal and accredited Nurse Practitioner Program such as Ob/Gyn Women’s Health Care or Family Planning Nurse Practitioner Program plus New York State Licensure.•Graduation from a formal and accredited Physician Assistant program plus New York State Licensure.•Graduation from a formal and accredited Nurse Midwifery program plus New York State Licensure.•Minimum of a Bachelor’s degree•Current BLS and ACLS Certification Minimum work experience•New graduates welcomed Licensure/Certifications•State license as a Physician Assistant, Midwife or Nurse Practitioner and be certified by a national credentialing body. PREFERRED QUALIFICATIONS•Master’s degree in nursing or related health field preferred•Prefer minimum of 1-year clinical experienceTYPICAL PHYSICAL DEMANDS • Requires prolonged sitting and repetitive tasks including use of a computer. Frequent standing, walking, bending. Must be able to walk up and down stairs. Requires lifting or moving of patients/supplies/equipment. Visual acuity sufficient to perform frequent work on a computer screen and review printed reports and other materials. Requires the ability to hear and to communicate orally with others. This role routinely uses standard office equipment such as computers, phones, photocopiers, and filing cabinets, and medical equipment and will require reaching, grasping, pushing and pulling.TYPICAL WORKING CONDITIONS

Job Description Who We Are: At Community Mainstreaming, our mission is to support individuals with developmental disabilities in living fulfilling, independent lives. Through our comprehensive services, we promote inclusion and empower those we serve to thrive within their communities. We are driven by compassion, innovation, and a strong commitment to making a difference. Learn more about our impactful work at communitymainstreaming.org. Overview: Join our team as a Community Habilitation Specialist and make a meaningful impact in the lives of our program participants. You'll provide essential oversight and support, empowering individuals to manage all aspects of their lives with maturity and responsibility. Your dedication will help them achieve greater independence and thrive within their communities. Here’s what makes working with us truly special: • Meaningful Impact: Every day, you’ll make a real difference in the lives of individuals with disabilities. Your efforts will help create a nurturing and inclusive community where everyone can thrive., • Collaborative Culture: Join a passionate team dedicated to supporting each other and the individuals we serve. We foster an atmosphere of collaboration, respect, and shared goals, making it a fulfilling place to work., • Professional Development: We invest in your growth! Benefit from ongoing training and resources to enhance your skills, ensuring you’re equipped to provide the best support possible., • Diverse Community: Be part of a vibrant community that celebrates diversity. Your unique background and perspective will enrich our team and enhance the experiences of those we support., • High school diploma or equivalent., • Valid and clean New York State driver’s license., • Experience as a Community Habilitation Specialist, Babysitter, or Home Health Aide., • Preferred experience with individuals with intellectual and developmental disabilities., • Own vehicle with proof of insurance, registration, and inspection., • Must possess and maintain a personal cell phone for work-related communication; this is a condition of employment., • Ability to travel with participants in vehicles for at least 30 minutes., • Skill in identifying community resources for participants' daily activities., • Ability to work independently with remote supervision., • Personable and approachable demeanor., • Proficiency in computer use., • Medical Benefits: Generous employer contribution; eligibility begins the first day of the month following 60 days of employment., • Dental Benefits: Employer-paid., • Vision Plan, • Accident Insurance, • Critical Illness Insurance, • Pet Insurance, • Identity Theft & Fraud Protection, • Legal Services, • 403(B) Retirement Plan: Organization match of up to 5%., • Life Insurance: Employer sponsored, • Tuition Assistance, • Section 125 Flexible Spending Program, • Up to 80 hours of vacation during the first calendar year of employment. Employees accrue an additional 8 vacation hours each subsequent calendar year, up to a maximum of 120 hours., • Up to 40 hours of personal time per calendar year. Part-time employees are also eligible for the 403(B) retirement plan and New York State Sick Leave. Pay: $20.50/hr. What You Will Do: • Provide meaningful instruction to individuals to enhance community living skills., • Assist with activities of daily living, personal care, health care, and promote community inclusion., • Support the development of relationships, social skills, and leisure activities., • Help individuals access community services and resources., • Facilitate the development of independent community travel skills., • Meet with individuals to discuss behavioral concerns and sensitive topics., • Encourage individuals to identify potential outcomes and engage in problem-solving training., • Assist individuals in effectively communicating with external entities such as Care Coordinators, vendors, healthcare providers, and landlords. Work Hours/Schedule: • Port Washington:, • Full-time: Monday – Friday, 10 AM to 4 PM (30-hour work week, including holidays), • Other sites: Community Mainstreaming Associates is an equal opportunity employer.

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job DescriptionCompany Description SOCOTEC is a provider of niche consulting services within the architecture, engineering and construction industries focusing on high-performance buildings and specialty structures. Through an integrated, holistic approach, our professionals provide solutions for building envelope, energy efficiency, sustainability, code advisory and construction advisory projects. SOCOTEC’s combination of expertise, experience and methods are increasingly recognized as best-in-class fueling significant growth. Future Tech Consultants of NY (FTC), a SOCOTEC Company, located in Mineola, NY is a Comprehensive Engineering, Inspection and Testing Company that has earned a highly regarded reputation for professionalism and reliability in the construction industry. FTC is owned and operated by Professional Engineers with over 50 years of inspection and testing experience. In business since 1994, we offer an impressive benefits and compensation package. FTC has immediate opportunities for experienced Special Inspectors and Field Engineers to be part of our team. Job Description FTC is looking for a FT Driver. Daily route to various NYC job sites - pick up materials etc. Construction (masonry / concrete ) exp. a bonus. Ability to lift and carry 50 pounds Responsible for keeping van clean and orderly on a regular basis. Qualifications M- F 6am – 2:30pm or when finished with your route. Sometimes Saturday. Must be reliable Clean NYS license is required. Additional Information FTC/SOCOTEC offers a competitive benefits package and an exciting & inclusive company culture where we foster learning and growth through our mentorship program, continuing education support, and other initiatives. For more information, please visit or ftcny.com Hourly rate: $20/hr This is a Union position with health benefits, paid time off and holidays, pension FTC/SOCOTEC is an Equal Opportunity Employer. SOCOTEC is an Equal Opportunity Employer. SOCOTEC is an Equal Opportunity Employer.

Job Description Join Imperial Cleaning as a Full-Time District Manager, a field based position within the New York Metro Area. This role presents an exciting opportunity to lead a team of dedicated professionals while driving customer satisfaction and operational excellence. You will be rewarded for your contributions to our vibrant, customer-focused culture. Your ability to think abundantly and solve problems will be pivotal in this high-performance environment, where your passion for delivering exceptional service will shine. We value integrity, empathy, and safety, ensuring that your efforts contribute to a supportive and engaging workplace. You will be offered great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Flexible Spending Account, Paid Time Off, Employee Discounts, Generous 401k match, and Aflac insurance plans. This is not just a job; it's a chance to impact your community and grow your career in a dynamic company dedicated to excellence in customer service. YOUR DAY AS A DISTRICT MANAGER As a new District Manager at Imperial Cleaning, your day-to-day expectations will involve overseeing multiple locations within the New York Metro Area. You will be responsible for managing teams, ensuring that customer service standards are consistently met or exceeded. Your tasks will include conducting regular site visits, providing support and training to staff, and implementing operational improvements to enhance efficiency and quality. Your schedule will typically be Monday through Friday, allowing for a balanced work-life dynamic while keeping you engaged with your teams. However, you will also be on-call for emergencies as needed, requiring quick problem-solving and decision-making skills. This role demands an empathetic approach to leadership, so you can expect to foster strong relationships with both employees and clients, ensuring a high-performing and customer-centric environment. ESSENTIAL FUNCTIONS • Establish working relationships with Clients., • Perform required location inspections and touchbases ( minimum of 1x ins and 2 TB per qtr)., • Report and resolve Inspection deficiencies. Urgent within 24 hours., • Managing Staff:, • Screen, Hire, Onboard, and Terminate staff., • Train Custodial Technicians supporting Area Sups & Acs ., • New Account setup oversight., • Assist to training staff with Clocking In/Out as needed., • Monitoring employee time and attendance., • Manage daily staffing schedules and adjust accordingly to ensure adequate staffing levels., • Conduct weekly payroll., • Report accidents/injury., • Address and resolve any employee performance issues., • Notify HR/Payroll and Operations of ALL staffing changes., • On-Call for Emergency situations/calls - evenings and weekends., • Create Supply Orders as needed., • Submit service requests to the office., • Update account spreadsheet as directed., • Responsible for KPIs within region., • Experience with Commercial cleaning industry a plus., • Must speak fluent English and Spanish., • Detail oriented and strong communication skills (email, phone)., • Results oriented: the ability to resolve challenges and emergencies at a moments notice., • Multi task oriented: The ability to handle multiple projects at a time., • Customer focused with a can-do approach to problem solving., • Knowledge of administrative and clerical procedures., • Working Knowledge of email, spreadsheets, smartphone and relevant software applications., • Knowledge of administrative and clerical procedures., • Clean DMV report & License. So, what do you think? If you feel this is the right job for you, go ahead and apply! We look forward to meeting you! Applicants must be 18 years of age or older to be considered for employment.

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

West John Street - Responsibilities: Learn all aspects of unloading or loading operations within a warehouse facility; Handle the movement of pallets on and off trailers and other vehicles using pallet jacks or forklifts; Maintain a safe and productive environment to exceed customer expectations; Li

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen

Nesco Resource - - Responsibilities: performing routine maintenance on all CNC machinery and equipment; troubleshooting and repairing machinery and equipment; ensuring a safe and functional environment; The Machine Maintenance Technician will perform maintenance and repair of all CNC machinery and

ALDI - - Responsibilities: Receives (Inbound) or selects (Outbound) incoming stock efficiently to effectively fulfill orders received from stores; Relocates merchandise throughout the warehouse according to product handling guidelines; Sorts, organizes and loads merchandise strategically in prepara

Atria Senior Living - - Responsibilities: Diagnose and repair problems in HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.Complete assigned service requests and repairs consiste

Atria Senior Living - - Responsibilities: Diagnose and repair problems in HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.Complete assigned service requests and repairs consiste

OnTrac - 235 East 2nd Street - Responsibilities: Unload trailers and sort packages by zip codes; Load trucks for deliveries; Be a team player everyone works together to get the job done; Be Safe! Safety is our first core value; Unpack and organize packages to maintain warehouse efficiency.

Home Depot - - Responsibilities: Load and unload trucks, move material within the facility, and transport products using hand trucks, forklifts, hoists, or motorized conveyors.

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car

Savers Value Village - 478a Union Boulevard - Responsibilities: Assist customers and manage warehouse operations to support store production and sales.