Field inspection jobs in Piscataway, New JerseyCreate job alerts

Job Description Location: 100 W. Main St, Bound Brook, NJ 08805 Job Type: Full Time Company Overview Arrow Sewer and Drain LLC is a locally owned and operated sewer, drain, and plumbing excavation company serving both residential and commercial customers. We specialize in diagnosing complex plumbing and sewer issues, performing precision repairs, and providing full excavation and replacement services when necessary. Our mission is to deliver dependable workmanship, transparent communication, and lasting solutions. We believe in professionalism, integrity, teamwork, and continuous improvement. Every employee contributes to our reputation and success. Position Summary: The CDL (Class A) Truck Driver/Heavy Equipment Transporter/Heavy Equipment Transporter is responsible for hauling large plumbing and sewer-related equipment (such as excavators, hydro jetters, vacuum trucks, trenchers, and skid steers) between job sites, our main yard, and vendor locations. The role requires precision, safety awareness, and a strong understanding of DOT regulations. Responsibilities: Job Site Supervision • Load, secure (chains, straps), transport, and unload heavy plumbing/sewer equipment using flatbed and/or lowboy trailers., • Operate company trucks (tractor-trailers, etc.) on local and long-haul routes, ensuring safe and efficient deliveries., • Conduct pre-trip, post-trip, and daily inspections of trucks, trailers, and securement devices; report defects and perform basic preventative maintenance., • Comply with all federal (DOT) and state traffic laws, maintain ELD logs, and uphold a clean driving record., • Complete all required documentation accurately, including trip logs, load summaries, fuel records, inspection reports, and delivery receipts., • Communicate with dispatch and supervisors using phones and GPS systems., • Assist field teams with equipment positioning, delivery timing, and job-site coordination., • Ensure all gas- and diesel-powered tools and equipment are fueled and ready for job-site use, including filling extra fuel cans as needed., • Treat all company vehicles, tools, and assets with care and respect., • Duties and work hours may vary based on operational needs. Qualifications: • Valid CDL Class A license., • Pass Pre-Employment Drug Screening, • At least 5 years of experience hauling heavy equipment., • Strong knowledge of load securement and hauling best practices., • Clean driving record and current DOT medical card., • Ability to occasionally assist with equipment setup or minor site duties., • Proficiency with GPS and navigation systems., • Time management and organizational skills., • Must be able to lift, bend, stand and walk for long periods of time., • Basic mechanic skills. What we offer • Competitive pay and performance bonuses, • Health, dental, and vision insurance, • 401K with matching, • Paid time off and holidays, • Opportunities for advancement and ongoing training

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Utility Technician will operate various Class A, B, and/or C vehicles (pumper truck, P&D truck, fence truck, container truck, etc.) in support of the operation's needs Responsibilities: • Conducts daily pre-shift & post-shift vehicle inspection & report deficiencies to shop immediately., • Also, report improper operation, faulty equipment, and unusual conditions to the Operations. Manager., • Operates service truck to and from pre-designated work sites based on daily routing information., • Services portable restrooms, holding tanks, septic tanks, sinks, showers, etc., at various work sites by following the Company's servicing guidelines., • Notifies management of any issues encountered on back-up route assigned., • Maintains telephone or radio contact with dispatch to receive additional instructions, changes to work locations, etc., • Maintains truck log according to state and federal regulations., • Follow all established safety rules & regulations., • Operates flat bed truck to and from pre-designated work sites based on daily routing information to deliver or pick-up portable restroom units, hand sinks, holding tanks or containers., • Updates tickets with relevant delivery or pick-up detail., • Operates fence truck to and from pre-designated work sites based on daily routing information to deliver or pick-up fence (chain link, panel, materials, etc.), • Will also act as a lead on fence jobs where a crew is assigned to the job/truck and will operate fence installation equipment., • Operates tanker/transfer truck to and from local dump and completes required paperwork as necessary., • Special projects as assigned by management. Qualifications:, • Minimum two years of commercial driving experience., • Valid Driver License (CDL or non-commercial)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision-making skills. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Push 100lbs and pull 100lbs horizontally Benefit Summary: All full-time employees working an average of 30 hours or more per week are eligible for the following benefits: • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $25.08 – $35.12 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Grease Technician operates a company service truck and drives to various locations to provide prompt, courteous, and complete waste removal for customers. Responsibilities: • Perform complete pre-trip inspection including but not limited to checking tire pressure, fluid levels, safety equipment, gauges, and controls, • Drives pump truck to and from customer sites and disposal areas, • Pump grease out of restaurants and other commercial tanks. Cleans/rinses tank with a water hose., • Read route sheets and services each customer as assigned by the dispatcher and/or supervisor and takes notes on the tickets with delivery/pick up details, • Maintain vehicle operating efficiency by completing preventative maintenance requirements, • Maintain safe operation and clean appearance by complying with organization operational policies, procedures, and standards, as well as state and local driving rules and regulations, • Maintain delivery, vehicle and driving records by obtaining receipt acknowledgments, recording tracking information, and completing driver log and vehicle performance forms, • Work continuously with dispatcher to confirm routes and update with any issues or changes, • Courteously interacts with customers, supervisors, and fellow employees. Submit all paperwork on a scheduled timeframe to dispatcher, • Wash exterior and interior of truck and cab, under frame, tires, and wheels, • Perform other duties as assigned Qualifications:, • Customer Service, • Teamwork, • Time Management, • Communications, • Decision Making and Problem Solving, • Ability to read, understand, and adhere to the rules and regulations of the Federal Transit Administration and U.S. Department of Transportation, • Analytical skills, with the ability to problem, solve effectively, • Excellent attendance and punctuality, • Excellent customer service skills and professionalism, • Ability to recognize vehicle maintenance needs, • Excellent oral and written communication skills, • Safe driving record (DMV documentation required), • Valid Driver License (Class CDL B or higher) Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Push 100lbs and pull 100lbs horizontally Benefit Summary: All full-time employees working an average of 30 hours or more per week are eligible for the following benefits: • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $25.08 – $35.12 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Job DescriptionSalary: Job Overview: We are seeking a skilled and motivated Sewer Team Operator / Pipe Installer to join our dynamic team. In this role, you will be responsible for operating sewer installation equipment and performing essential pipe installation tasks on sewer systems. You will work closely with a team of professionals to ensure the efficient, safe, and high-quality installation of sewer pipes and related infrastructure. If you are detail-oriented, have hands-on experience with sewer operations, and thrive in a team environment, we encourage you to apply. Key Responsibilities: • Sewer Pipe Installation: Install and repair sewer pipes, manholes, and related infrastructure, ensuring compliance with all safety regulations and quality standards., • Equipment Operation: Operate heavy machinery and tools such as trenchers, backhoes, and pipe cutters to lay and install sewer lines., • Excavation and Digging: Perform excavation work using manual and mechanical means to create trenches for pipe installation., • Inspection and Maintenance: Conduct inspections on sewer systems, ensuring proper installation and resolving any issues or malfunctions., • Team Collaboration: Work collaboratively with crew members, supervisors, and engineers to achieve installation goals and adhere to timelines., • Safety Compliance: Follow all safety guidelines and ensure that work areas are properly marked, secured, and meet safety regulations., • Troubleshooting: Identify and troubleshoot issues with sewer systems or equipment and perform necessary repairs or adjustments., • Documentation: Maintain accurate records of installations, maintenance, and repairs performed. Requirements: • Experience: Minimum 5-7 years of experience in sewer system installation, pipe laying, or construction-related fields., • Skills:, • Proficient in operating sewer installation machinery and hand tools., • Knowledge of local sewer codes, regulations, and safety standards., • Ability to read and interpret blueprints, technical drawings, and project specifications., • Strong problem-solving skills and ability to work independently or in teams., • Physical Requirements: Ability to lift heavy materials, work in outdoor conditions, and perform physically demanding tasks for extended periods., • Certification (preferred): Relevant certifications (e.g., OSHA, pipe installation, CDL) are a plus., • Attention to Detail: Ensure precision in measurements, alignment, and pipe placement to prevent future system issues. Preferred Qualifications: • Experience in trenching, backfilling, and operating relevant construction equipment., • Familiarity with stormwater systems and other types of underground utilities., • Valid driver's license and clean driving record. Benefits: • Competitive salary based on experience., • Health, dental, and vision insurance., • Paid time off and holidays., • Opportunities for career growth and training., • Safety gear and tools provided. To Apply: Please submit your resume.This position offers a unique opportunity to work in a vital field with a supportive team in an essential industry. If you're dedicated, safety-conscious, and passionate about construction, we want to hear from you!

We are seeking an experienced Senior Highway Inspector with a NICET Level III Certification in Highway Construction to lead field inspection efforts for complex transportation infrastructure projects throughout New Jersey for NJTA/NJDOT. Responsibilities * Lead and perform daily inspection of hig

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Vision insurance We are searching for an experienced plumber to fill a full-time position. Primarily we perform various plumbing repairs and service work. Some of our services include pipe repair and installation, TV Video pipe inspection, HVAC, plumbing fixtures, hot water heaters, dig-up jobs, high pressure water jetting, drain clearing and excavation. This position would include giving estimates and writing proposals. Additionally helping both in the office and the field to manage the workflow of the company. We provide truck and equipment plus offer holiday, vacation, medical benefits and bonuses. There is plenty of opportunities for advancement as you gain experience. In addition we usually offer overtime to those who would like to work extra.

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance We are searching for an experienced plumber to fill a full-time position. Primarily we perform various plumbing repairs and service work. Some of our services include pipe repair and installation, TV Video pipe inspection, HVAC, plumbing fixtures, hot water heaters, dig-up jobs, high pressure water jetting, drain clearing and excavation. This position would include giving estimates and writing proposals. Additionally helping both in the office and the field to manage the workflow of the company. We provide truck and equipment plus offer holiday, vacation, medical benefits and bonuses. There is plenty of opportunities for advancement as you gain experience. In addition we usually offer overtime to those who would like to work extra.

Job Description The Automation Engineer is responsible for designing, implementing, and sustaining automated manufacturing systems that improve production efficiency, consistency, and cost performance. This role drives automation strategy by identifying capable vendors, developing system concepts, and ensuring successful integration of automation into manufacturing operations. JOB OUTCOMES The Automation Engineer is expected to deliver measurable improvements in manufacturing performance through the successful design, implementation, and support of automation systems. Performance is demonstrated by: • Reducing production costs and labor content through effective automation solutions, • Improving uptime, reliability, and efficiency of new and existing automated systems, • Successfully launching automation projects on time, within budget, and meeting defined performance targets, • Expanding automation capability by identifying and qualifying new vendors and technologies, • Minimizing downtime through effective troubleshooting, system support, and error recovery improvements ESSENTIAL DUTIES AND RESPONSIBILITIES Automation and Controls — 50% • Designs and implements automated manufacturing systems that increase capacity, improve uptime, and ensure repeatable performance, • Develops and integrates control systems (PLC, HMI, robotics, vision) to ensure safe, error-proof, and efficient operation, • Programs, debugs, and optimizes robotic and automated systems on the shop floor, • Interfaces automation with manufacturing equipment including welding, cutting, stamping, forming, inspection, and assembly systems, • Identifies, evaluates, and collaborates with automation vendors to deliver high-quality system builds, • Reviews and approves system designs, assembly drawings, and tooling components to ensure functionality and manufacturability, • Supports development and execution of IQ/OQ/PQ validation activities to ensure systems meet regulatory and performance requirements Project Management — 30% • Leads automation projects from concept through full production implementation, ensuring alignment with technical, cost, and timeline objectives, • Develops and evaluates cost estimates, production rates, and design feasibility to support decision-making, • Drives cross-functional collaboration to ensure successful system integration and project execution, • Identifies and executes continuous improvement initiatives that enhance manufacturing performance, • Develops robust, repeatable manufacturing processes that meet defined run rates, scrap targets, and process capability requirements Systems Support — 20% • Provides technical support and troubleshooting for automated and robotic systems to minimize downtime and sustain performance, • Develops preventative maintenance strategies and standard work instructions to ensure long-term system reliability, • Creates and maintains bills of material to support system builds, maintenance, and spare parts management Continuously improves system performance through monitoring, root cause analysis, and corrective actions QUALIFICATIONS • Bachelor’s degree in Engineering or related field required, • 3–7 years of experience in automation, process improvement, or manufacturing engineering, • Experience with IQ, OQ, PQ validation processes and protocols required, • Demonstrated ability to synthesize complex information and develop effective solutions, • Experience in high-volume manufacturing environments (injection molding, metal stamping, etc.) strongly preferred, • Proven ability to independently design cost-effective, functional automation systems meeting complex requirements LICENSE AND CERTIFICATION · None TECHNICAL SKILLS • Programming and debugging PLCs, HMIs, robotics, and vision systems, • Allen Bradley (RSLogix 5000), FactoryTalk, RSLinx, • MS Office Suite; Minitab or similar statistical tools, • Blueprint reading and Geometric Dimensioning & Tolerancing (GD&T), • Statistical Process Control (SPC), Measurement Systems Analysis (MSA / GR&R), • Design of Experiments (DOE)

Job DescriptionDescriptionAbout ArtheonArtheon brings together several established consulting engineering firms including Churchill Consulting Engineers, CME Associates, and Naik Consulting Group, forming a collaborative organization of more than 600 professionals with expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. We are seeking a detail-oriented Highway Inspector with a NICET Level II Certification in Highway Construction to support major roadway and infrastructure projects throughout New Jersey for NJTA/NJDOT. This role is critical in ensuring construction activities comply with project plans, specifications, and applicable standards, while maintaining quality, safety, and schedule adherence. You’ll be working closely with contractors, project managers, and agency stakeholders on high-impact transportation projects including highways, bridges, and roadway rehabilitation programs. Responsibilities • Monitors contractor operations and verifying conformance with project plans and specifications, • Serves as the on-site highway inspector for construction work performed by the contractor and subcontractors., • Interacts with the construction contractor’s site supervision on field activities to ensure compliance with the construction contract requirements, • Prepares daily reports, correspondence, change orders, periodic payment estimates, and quantity computations, • Observes details of work performed by others, documenting results; obtaining photographic documentation of work performed, • Confirms compliance with technical documents and industry-specific standards and codes, • Reviews and downloads field data into laptop computer and transfer to company server, • Discusses projects with project team on a daily basis, • Makes accurate judgment-calls on a variety of construction field activities, • Performs other like duties, as assigned Qualifications • Bachelor’s degree in Civil engineering is preferred, • NICET Level II in Highway Construction certification is required, • ACI, TCC, CCTC, and NJSAT certifications required, • 3+ years of experience in highway construction inspection, • Experience with NJDOT / NJTA projects required, • OSHA 10-hour safety course is required, • Excellent written and verbal communication skills, • Good time-management skills, • Ability to perform under pressure, • Good skills in Microsoft Excel, Word and Powerpoint, • A strong attention to detail is necessary. BenefitsArtheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

Job DescriptionDescriptionAbout ArtheonArtheon brings together several established consulting engineering firms including Churchill Consulting Engineers, CME Associates, and Naik Consulting Group, forming a collaborative organization of more than 600 professionals with expertise spanning civil/site engineering, environmental permitting, transportation infrastructure, construction management, and advanced surveying technologies, we are committed to delivering high-quality, timely solutions to local, state, and federal clients. We are seeking an experienced Senior Highway Inspector with a NICET Level III Certification in Highway Construction to lead field inspection efforts for complex transportation infrastructure projects throughout New Jersey for NJTA/NJDOT. This role will serve as a key liaison between contractors, project management teams, and public agency stakeholders, ensuring all construction activities meet the highest standards of quality, safety, and compliance. This is an opportunity to take ownership of inspection operations on high-visibility roadway and bridge projects, while mentoring junior inspectors and contributing to successful project delivery. Responsibilities • Lead and perform daily inspection of highway and roadway construction activities to ensure compliance with contract documents, plans, and specifications, • Serves as the on-site highway inspector for construction work performed by the contractor and subcontractors., • Oversee contractor operations including earthwork, paving, structures, drainage systems, and traffic control, • Interacts with the construction contractor’s site supervision on field activities to ensure compliance with the construction contract requirements, • Prepares daily reports, correspondence, change orders, periodic payment estimates, and quantity computations, • Observes details of work performed by others, documenting results; obtaining photographic documentation of work performed, • Confirms compliance with technical documents and industry-specific standards and codes, • Reviews and downloads field data into laptop computer and transfer to company server, • Discusses projects with project team on a daily basis, • Makes accurate judgment-calls on a variety of construction field activities, • Performs other like duties, as assigned Qualifications • Bachelor’s degree in Civil engineering is preferred, • NICET Level III in Highway Construction certification is required, • ACI, TCC, CCTC, and NJSAT certifications required, • 5+ years of experience in highway construction inspection, • Experience with NJDOT / NJTA projects required, • OSHA 10-hour safety course is required, • Excellent written and verbal communication skills, • Good time-management skills, • Ability to perform under pressure, • Good skills in Microsoft Excel, Word and Powerpoint, • A strong attention to detail is necessary. BenefitsArtheon offers a competitive compensation package including medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off/parental leave.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Free uniforms, • Opportunity for advancement, • Signing bonus Are you an experienced gutter installer? If so, ask about our potential Sign-on bonus. Are you tired of feeling underappreciated and not having a clearly defined career path in your job? Imagine if you could know exactly what you needed to do to receive a pay raise and promotion from day one. At The Brothers that just do Gutters, you can! We provide a skills ladder training program that clearly defines each worker's career path, expectations, and raise potential. We truly believe in investing in our employees and creating a work culture unlike any other. We also offer huge opportunities for growth. This is an experienced position, and the ultimate candidate will have at least 10+ years of skilled gutter and/or exterior construction experience. A positive attitude is a must, as well as the ability to properly, and comfortably interact with clients and other employees. You will be groomed for leadership in the field, to be part of a family, and to grow with an established brand. Find out why our culture is at the core of being a Top 100 Culture Award Winner and an official Certified Great Place To Work! Experienced Gutter Installer Requirements: • 5+ years of experience in gutter installation including both K-style & half round gutters, • A positive attitude, • Excellent communication skills, • Ability to work outdoors in all weather conditions/seasons, • Interest in growing with the company, • Willingness to work overtime, • Be a team player, • A desire to establish a positive work culture, • OSHA certification and/or ladder safety training preferred, • Previous experience specifically related to gutter services and installation, and a passion for all things gutters! Experienced Gutter Installer Compensation: Hourly Position $24.00/hour Experienced Gutter Installer Minimum Requirements: • Construction/Gutters: 2+ years, • Must be 18 or older, • Must have a valid drivers license The Brothers That Just Do Gutters is a rapidly growing, locally owned, and operated franchise with multiple locations across the country. Our mission is to "Reinvent Contractor Service" by providing a great place to work and delivering 5-star service every step of the way from initial phone inquiry, home visit, inspection and estimate, scheduling, timeliness, installation, follow-up, and ongoing support and service. We want to do what's right for our employees, customers, and communities. Apply today!

Job Description Senior Construction Inspector - Transportation & Infrastructure Location: Woodbridge, NJ Employment Type: Full-Time | On-Site Salary Range: $100,000 – $150,000 annually (based on experience) Industry: Construction Management | Transportation | Infrastructure | Bridge | Civil Engineering About Garg Consulting Services, Inc. Garg Consulting Services, Inc. (Garg) is a leading multidisciplinary engineering and construction management firm specializing in transportation infrastructure, rail, bridge, and civil construction projects throughout the Northeast. Position Overview Garg Consulting Services, Inc. is seeking an experienced Senior Construction Inspector to support transportation infrastructure construction projects throughout Northern and Central New Jersey. This role supports NJ DOT, NJTA, NJ Transit, and public-sector roadway, bridge, rail, and civil projects, ensuring compliance with approved plans, specifications, and safety standards. The Senior Construction Inspector performs advanced field inspections, coordinates daily with contractors, engineers, and client agencies, and oversees construction quality, documentation, and pay quantities. This full-time, on-site position may also provide technical leadership and mentoring to junior inspection staff. Key Responsibilities • Perform and oversee daily field inspections of roadway, bridge, rail, and transportation infrastructure projects., • Ensure construction activities comply with approved plans, specifications, and contract documents., • Serve as the senior field representative and liaison between contractors, engineers, and client agencies., • Document daily construction activities, quantities, labor, equipment, and progress using digital reporting tools., • Track and verify pay quantities and assist with review of progress payments and estimates., • Review material certifications, test results, and submittals prior to installation., • Inspect traffic control and erosion control measures for compliance with approved plans and regulations., • Identify non-conforming work and coordinate corrective actions., • Assist with change orders, field modifications, and as-built documentation., • Lead and mentor junior inspection staff as required., • Attend construction meetings and provide technical field input., • Support project closeout activities including final inspections and punch lists.Required Qualifications & Certifications, • Bachelor's degree in civil engineering, Construction Management, or related field OR equivalent experience., • Minimum five (5) years of experience as a Senior Construction Inspector or Resident Engineer., • New Jersey P.E. license or NICET Level IV Highway Construction Inspection certification., • ACI certification., • NJ SAT Asphalt Technician certification., • Rutgers Traffic Control Coordinator certification., • OSHA 30-Hour Construction Safety certification., • Ability to perform quantity calculations and interpret plans and specifications., • Proficiency with digital inspection tools and Microsoft Office., • Ability to work in varied weather and field conditions., • TWIC Card eligibility and background screening compliance.Preferred Qualifications & Experience, • Experience on NJ DOT, NJTA, NJ Transit, or public-sector transportation projects., • Rail, bridge, and complex transportation infrastructure experience., • Experience mentoring or overseeing junior inspectors., • Familiarity with Document Control and Project Management Programs such as SiteManager, FieldManager, Bluebeam or Procore., • Additional certifications such as CMIT, EIT, CCMCompensation & Benefits, • Competitive Salary: $100,000 – $150,000 annually, • Medical, Dental & Vision Insurance, • 401(k) Retirement Plan with Company Match, • Paid Time Off & Paid Holidays, • Performance-Based Bonuses, • Professional Development & Licensing Support, • Wellness perk; gym membership reimbursementEqual Opportunity Employer Garg Consulting Services, Inc. is an Equal Opportunity Employer. Employment decisions are based on merit, qualifications, and business needs and comply with all applicable laws. Final candidates are required to undergo a background check and a pre-employment drug screening. These screenings may include employment and education verification, reference checks, and a criminal history check as allowed by law. All screenings are conducted in accordance with federal, state, and local requirements, including the Fair Credit Reporting Act (FCRA). Employment offers are contingent upon the successful completion of all required checks.

Job Description Resident Engineer/CM Practice Lead - Transportation & Infrastructure Location: Woodbridge, NJ Employment Type: Full-Time | On-Site Salary Range: $150,000 – $200,000 annually (commensurate with experience) Industry: Civil Engineering | Construction Management | Transportation Infrastructure | Highway & Bridge Projects About Garg Consulting Services, Inc. Garg Consulting Services, Inc. (Garg) is a leading multidisciplinary engineering and construction management firm delivering transportation infrastructure, rail, bridge, and civil construction solutions across the Northeast. Our team supports high-profile public-sector projects with a focus on quality, safety, and regulatory compliance. Position Overview Garg Consulting Services, Inc. is seeking a seasoned Resident Engineer / Construction Management (CM) Practice Lead to support transportation infrastructure construction projects throughout Northern and Central New Jersey. This role supports projects for NJDOT, NJTA, NJ Transit, and other public agencies, overseeing roadway, bridge, rail, and civil construction activities. This is a full-time, on-site role requiring strong leadership, hands-on field experience, and technical expertise. Key Responsibilities • Oversee construction inspection and project management for highway, bridge, rail, and civil infrastructure projects, • Collaborate with project managers, engineers, and contractors to resolve construction-related issues, • Review construction plans, drawings, specifications, and contract documents, • Review and approve RFIs, shop drawings, working drawings, and value engineering proposals, • Perform materials inspection and acceptance prior to installation, • Monitor construction activities for compliance with approved plans and specifications, • Track, document, and manage project issues and field conditions, • Prepare and contribute to monthly project status reports, • Support project pursuits and staffing oversight as a CM Practice LeadRequired Qualifications & Certifications, • Bachelor's degree in civil engineering or construction management, • Minimum 5 years of experience as a Resident Engineer on roadway and bridge projects, • Active New Jersey Professional Engineer (P.E.) license, • ACI Certification, • NJ SAT Asphalt Technician Certification, • Rutgers Traffic Control Coordinator Certification, • OSHA 30-Hour Construction Safety Certification, • Strong knowledge of rail design and construction methods, • Proficiency with inspection documentation software and mobile tools, • Ability to work in varied weather and field conditions, • TWIC Card eligibility and background screening compliancePreferred Qualifications, • Experience with NJDOT, NJTA, NJ Transit, or public-sector transportation projects, • Rail, bridge, and complex infrastructure experience, • Knowledge of construction management and quality assurance practices, • Design-build and conventional delivery experience, • Additional certifications such as CCMCompensation & Benefits, • Competitive salary: $150,000 – $200,000 annually, • Medical, Dental & Vision Insurance, • 401(k) with company match, • Paid Time Off and Paid Holidays, • Performance-based bonuses, • Professional development and licensing support, • Wellness perk; gym membership reimbursementEqual Opportunity Employer Garg Consulting Services, Inc. is an Equal Opportunity Employer. Employment decisions are based on merit, qualifications, and business needs and comply with all applicable laws.

Job Description The Quality Assurance Engineer II is responsible for conducting complex ongoing analysis of the production process inputs and outputs to ensure that customer quality requirements are being achieved. The Quality Engineer II is expected to: • Maintain SPC limit at or above the corporate target., • Keep customer complaints less than or equal to previous year, • Manage CAR containment and root cause investigation, corrective action plan and completions on time, • Maintain scrap below the maximum percent of sales identified Research & Analysis • Collects production data and applies standard scientific and statistical methods to analyze, document, and diagram production processes. Conducts FMEA, DOE, and SPC analysis, • Performs complex data analysis and uses six sigma tools to resolve complex quality issues., • Provides input to the production control systems and designs control activities, • Provides input for new product equipment selection, installation and maintenance, • Maintains expert level of understanding of GD&T, • Leads investigations to determine root cause, development of corrective action plans, verification and effectiveness activities., • Use appropriate statistical techniques to analyze data and make/recommend decisions, • Leads projects, teams and complex product transitions., • Provides mentorship and support to team members Customer Support • Develops quality standards and processes related to customer specifications and process improvement, • Communicates with customers, suppliers and other resources to achieve the objectives, • Works with customers to understand product specifications and satisfies any quality related issues or concerns. Quality Assurance • Evaluates process stability and capability, • Analyzes processes and procedures to ensure they fit the organization’s quality standards., • Ensures quality processes and procedures comply with internal SOPs, • Assists with regulatory audits, • Performs inspections and sets quality assurance testing models for analysis of raw materials, materials in process, and finished products., • Provides communication to Calibration Technicians of any additions, deletions, or changes to the process gages and equipment, • Writes detailed work instruction-level documents for Quality and related areas. Trains personnel in these instructions and other technical process controls, • Quarantines, documents and evaluates products and materials and generates Material Review Board (MRB) Case(s) as appropriate., • Ensures control plans and associated documentation are implemented effectively and maintained., • Monitors and reports on quality-related key performance indicators, • Ensures compliance and assists with adherence to quality management system, • Writes product test procedures and performs IQ/OQ/PQ protocol. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE • Bachelor’s degree in Engineering or a related field is required., • At least 4-7 years of quality experience in a manufacturing environment or equivalent combination of education and experience is required. LICENSE AND CERTIFICATION • ASQ certification is preferred TECHNICAL SKILLS • Blueprint reading and interpretation, • Gage design knowledge, • APQP, • MSA, • PPAP, • SPC, • GD & T, • Automated inspection software, • Lean, • Six Sigma, • MS Office Suite OTHER SKILLS • Manual dexterity, • Spatial dexterity, • Problem solving, • Root cause analysis, • Corrective Action, • Multitasking, • Written communication, • Verbal communication, • Organizational skills, • Time Management While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must frequently lift, push, pull, carry and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment is usually moderate.

Job DescriptionDescription: About Us: Approved Fire Protection Co. is New Jersey's oldest family-owned, full-service fire protection and safety equipment company. Our services include fire extinguishers, alarm systems, suppression systems, SCBA, gas detection, carbon dioxide, oxygen, sprinkler systems, and so much more. Approved Fire Protection’s mission is to supply life safety products and service to the industrial, commercial, pharmaceutical, and municipal companies in New Jersey and near surrounding areas. Job Summary: Approved Fire Protection is looking for a full- time experienced Service Technician for Fire Sprinkler Systems. This is a great opportunity for someone who can handle working on all types of piping networks including sprinklers and suppression systems. Knowledgeable with various fire suppression systems such as dry, wet, pre-action & deluge systems, fire pumps, jockey pumps, standpipes, hose stations, fire hydrants and backflow preventers. Candidate should be mechanically inclined and possess the ability to diagnose and repair any reported problems. Essential Duties and Responsibilities: • Perform installations, repairs, testing and inspections of wet/dry/pre-action sprinkler systems., • Follow Safety procedures and guidelines., • Ability to lift, carry and move pipes, valves and other equipment that can weight approximately 20 to 100 pounds., • Ability to show up to work and appointments in a timely manner., • Must be able to use ladders and use lifts., • Repair Sprinkler Systems: Groove pipe, thread pipe, replace valves, heads., • Generate correctly and legibly inspection certificates and related paperwork., • General Knowledge of NFPA 25 and NFPA 13., • Develop positive and ongoing relationships with customers to ensure satisfaction., • Provide lists for fabrication and coordinate between the trades., • Must be able to participate in emergency call rotation.Requirements: Built for Stability In an industry where layoffs and company buyouts have become common, Approved Fire Protection & Security remain focused on long-term growth and steady opportunity. We’re proud to hire talented professionals who are looking for lasting careers, not short-term stops. If you are interested in: • Steady workflow, • Supportive team culture, • Long-term opportunity for growth, • Respect for your craft, • Three strong locations with established operations Preferred Qualifications: • Prior experience in the fire protection industry; primarily sprinkler & suppression, • Ability to inspect, install and service all types of fire sprinkler systems., • Ability to read and understand blueprints., • Strong written and verbal communication skills., • Ability to be proactive in communicating and working with other departments., • Current possession of (or will obtain) a NICET certification., • Ability to pass a pre-employment background and random drug tests., • Enjoys working in a team environment., • Excellent customer service skills. Required Qualifications: • Field experience with at least 2-4 years hands on experience in Sprinkler Inspection/Repair, • Current possession of (or will obtain) a DOT HAZMAT endorsed driver’s license., • Current possession of (or will obtain) a NICET level I or II certification., • Valid driver's license and excellent driving record., • Must be willing to travel throughout NJ as required to project field locations., • Language: English Benefits: • Medical, • HSA, • Dental, • Vision, • 401k with company contribution, • Aflac, • Life Insurance, • Long term disability, • Long Term Care Insurance, • Summer Hours Program, • Profit Sharing, • Mileage Reimbursement, • PTO

Job Description Pay Range: $19-$20 hourly About Us ADESA, a Carvana owned company, currently operating over 50 locations throughout the US. Our Auto Auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Role and Team This role supports the ADESA businesses and customers by inspecting vehicles for condition, wear, tear, neglect, missing parts, mechanical issues, previous repairs, and damage/structural damage. Complete required vehicle inspection promptly and accurately including imaging and uploading results of the vehicle condition. Interact with dealers and consumers as needed professionally as the face of ADESA and its collective businesses. Responsibilities • Communicate in a professional manner with customers (dealer or consumer), • Resolve any customer inquiries in a friendly, courteous, and professional manner; advise management of all complaints or incidents, • Ensure internal and external customers receive prompt, efficient, and courteous attention, • Inspect vehicles for signs of wear, tear, neglect, damage, previous repair, mechanical or structural damage., • Complete inspection of vehicles and ensure adherence to the defined program for the customer., • Capture data accurately on a mobile device, and work comfortably with software and technology., • Deliver results in a timely manner, • Maintain productivity levels as set forth by management., • Deliver consistent, accurate inspections with a minimal rate of errors in accordance with reasonable expectations set forth by management., • Collaborate with management and sales team members on customer needs with insights to improve services provided, • Maintain equipment and tools properly and advise the manager of any equipment maintenance or breakdown needed, • Ensure vehicles are in clean condition with radios, seats, mirrors, and other convenience items in the same position as when the vehicle arrives, • Submit completed condition reports using the appropriate technology made available to you to complete the vehicle inspection, • Complete road test if required by contract or inspection type, • Keep current on technology updates, new releases, and product development, • Understand the functionality and ability to use tools such as paint meter, OBD scanner, etc., • Develop and maintain knowledge and expertise in areas of competitor products, • Other duties as assigned. Qualifications • Must be at least eighteen (18) years of age., • Must be qualified to operate a motor vehicle and possess a valid driver's license., • Must have a demonstrated ability to read, write, and communicate effectively in English., • Must have the ability to physically operate vehicle equipment and tools., • 1 year Automotive experience: Repair Shop, Educational, Hobby, • Mechanical Aptitude, • Ability to enter data on a hand held device, • Ability to identify previous repair after appropriate training, • Ability to identify basic mechanical issues (sludge, suspension damage, radiator damage) ADESA Benefits and Perks Competitive Pay | Quality Benefits | Holiday and Paid Time Off | Education and Equipment Reimbursement Programs | Matching 401(k) | Career Path Opportunities | And More! Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Medium Physical Work., • Frequent – standing, watching, touching, listening, walking, talking, • Potential – running, jumping, yelling or other rapid or forceful movement in emergency situations, • Visual acuity requirements include color, depth perception and field of vision comparable to definitions for Clerical, Administrative, Machine Operators (including inspection) positions. Physical Working Conditions This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. • Note: Refer to the Handbook and Policy Manuals for important addendum requirements to all job descriptions. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionDescriptionCME Associates, a leading engineering and consulting firm in Parlin, NJ, is seeking a highly skilled Inspector to join our team. The ideal candidate will have experience in various construction aspects, ideally, including sheet pile, and concrete formwork & reinforcement. Experience in water main, storm sewer, paving, and civil site work is a plus. As an Inspector, you will play a crucial role in ensuring compliance with project specifications and industry standards. Responsibilities • Conduct Inspections: Perform on-site inspections to monitor construction activities and ensure compliance with project plans, specifications, and applicable codes., • Documentation: Maintain accurate records of construction activities, including daily reports, photographs, and inspection logs., • Quality Assurance: Conduct quality assurance checks on materials, workmanship, and construction processes to ensure conformance with project requirements., • Coordinate with Contractors: Communicate regularly with contractors to address concerns, provide guidance, and facilitate the resolution of construction-related issues., • Compliance Oversight: Monitor contractor compliance with safety regulations, environmental requirements, and permit conditions., • Progress Reporting: Provide regular progress updates to project managers and clients, highlighting milestones achieved and potential delays., • Problem Resolution: Identify and resolve construction-related problems promptly to minimize project disruptions and maintain schedule adherence. Qualifications • Experience: Minimum of 3 years of relevant experience in construction inspection, preferably in the areas of pile driving, concrete work, water main, storm sewer, paving, and civil site work., • Certifications: Possession of relevant certifications such as ACI Concrete Field Testing Technician Grade I, NICET certifications, or equivalent., • Knowledge: In-depth understanding of construction methods, materials, and industry regulations., • Communication Skills: Strong verbal and written communication skills to effectively interact with contractors, clients, and project stakeholders., • Attention to Detail: Meticulous attention to detail to identify discrepancies and ensure adherence to project specifications., • Problem-Solving Skills: Ability to troubleshoot issues and propose effective solutions in a dynamic construction environment., • Team Player: Demonstrated ability to work collaboratively within a multidisciplinary team environment. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description Geo-Technology Associates, Inc. (GTA) is seeking a Structural Steel Special Inspector with relevant test experience for work in the Somerset, NJ area. Structural Steel Inspector Responsibilities: • Verify construction is being completed in accordance with all plans and specifications, • Carry out inspections, sampling and testing, • Coordinate with clients, general contractors, and GTA Project Managers, • Record and document the construction in daily field reports, • Contribute to the generation of technical reports and special inspection summaries, • Oversee, train, and mentor junior/less-experienced staff Requirements At least one of the following: • NJ DCA/ICC Structural Steel Bolting, • NJ DCA/ICC Structural Steel Welding, • CWI Certifications preferred (not required): • NJ DCA/ICC (Soils, Structural Masonry, Reinforced Concrete, etc.), • ACI Certified Construction Special Inspector (CCS), ACI Concrete Field-Testing Technician Grade 1, ACI/CRSI Certificate for Post-Installed Concrete Anchor Installation Inspector, • Own reliable transportation, valid driver's license and satisfactory driving record., • Authorized to work in the U.S., • Ability to work independently and as a part of a team, • Ability to lift up to 75 lbs. unaided and up to 100 lbs. with assistance: frequent bending, hammering and repetitious movements. Benefits We believe in taking care of our team—professionally, personally, and everything in between. Here’s what you can look forward to as part of our team: • Competitive Salary with generous Paid Time Off and Paid Holidays to support your work-life balance, • Annual Bonus Potential – your hard work deserves to be rewarded, • Comprehensive Health Coverage – including Medical, Dental, Vision, plus Health Savings and Flexible Spending Accounts, • Peace of Mind – with Company-paid Life Insurance and both Short- and Long-Term Disability Insurance, • Invest in Your Future – through our 401(k) with Company Match, • Education Assistance Program – helping you continue to grow and learn, • Employee Assistance Program – free access to short-term counseling, financial coaching, legal consultations, life coaching, and more, • Peak Health Wellness Plan – personalized nurse consultations, no-cost lab work, and ongoing wellness support, • Stay Connected & Inspired – with free memberships to professional societies, • Professional Development – Seminars, Conventions, Lunch & Learns, Mentoring, and Software Training to help you reach your goals, • Referral Bonuses – bring great people on board and get rewarded, • Recognition That Matters – we celebrate achievements big and small with our Employee Recognition Program, • Team Spirit & Fun – enjoy company picnics, events, and a welcoming, supportive work environment We ensure nondiscrimination and equal employment opportunity in all programs and activities in accordance with Title VI of the Civil Rights Act of 1964, and all revisions and addendums thereof.

Job DescriptionJob Title: Food Safety Quality Specialist Job Description The Food Safety Quality Specialist supports daily quality and food safety operations on the plant floor, ensuring that all processes meet regulatory, customer, and internal standards. This role maintains and updates food safety programs, partners closely with production and maintenance teams to resolve quality issues, and plays an active part in audits, inspections, and continuous improvement initiatives within a global, growth-focused organization. Responsibilities • Support daily quality and food safety operations on the plant floor, ensuring products meet internal and regulatory standards., • Assist the Supervisor Product Safety Site Leader in maintaining site compliance with all applicable food safety and quality requirements., • Maintain, review, and update Food Safety Plans in accordance with FSMA requirements., • Support the development, implementation, and ongoing maintenance of HACCP plans, standard operating procedures (SOPs), and sanitation standard operating procedures (SSOPs)., • Participate actively in food safety and quality committees, including allergen control, sanitation, and traceability teams., • Partner with Production and Maintenance to troubleshoot and resolve quality and food safety issues in a timely and effective manner., • Support equipment commissioning activities, ensuring new or modified equipment meets food safety and quality standards., • Contribute to process improvement initiatives focused on enhancing product quality, food safety, and operational efficiency., • Maintain accurate, complete, and organized records to support FDA and other regulatory compliance requirements., • Interact cross-functionally with internal stakeholders to prepare for and support internal and external audits and inspections., • Manage or support food safety programs and audits independently within a food manufacturing environment, including HACCP plans and GFSI-related standards., • Apply food microbiology and quality assurance principles to monitor and improve food safety controls.Essential Skills, • 2–3+ years of experience in food manufacturing, managing audits, HACCP plans, and food safety programs independently., • Hands-on experience with HACCP development, implementation, and assessment., • Experience working with or enforcing GFSI standards within a food manufacturing environment., • Strong background in quality assurance and food safety, including food microbiology., • Ability to maintain and update Food Safety Plans in accordance with FSMA., • Experience supporting or managing food safety audits and inspections., • PCQI certification., • HACCP certification., • Bachelor’s degree in Food Science, Food Microbiology, Microbiology, or a related field., • Ability to collaborate effectively with production, maintenance, and cross-functional teams., • Strong attention to detail and accuracy in maintaining regulatory and quality records.Additional Skills & Qualifications, • Internal auditor certificate (nice to have)., • Experience participating in allergen control, sanitation, and traceability programs., • Experience supporting equipment commissioning and process improvement initiatives in a manufacturing setting., • Strong problem-solving skills for troubleshooting quality and food safety issues., • Ability to work independently while contributing to a small, collaborative team., • Interest in contributing to a global organization focused on taste, scent, and nutrition and delivering natural solutions to customers.Work Environment This role operates primarily within a plant-based quality and food safety setting, working closely with production, maintenance, and support laboratory teams. The position is part of a small team of approximately two people and includes time in an individual cubicle as well as time in the support lab and on the plant floor. The environment involves regular interaction with manufacturing operations, equipment commissioning activities, and audit or inspection preparation. The organization is a global leader in taste, scent, and nutrition, with a strong focus on natural solutions and growth, offering a collaborative and quality-driven culture. Job Type & Location This is a Permanent position based out of Milltown, NJ. Pay and Benefits The pay range for this position is $65000.00 - $75000.00/yr. Medical, dental, and vision insurance (glassdoor.com) Health Savings Account (HSA) & Flexible Spending Account (FSA) options (glassdoor.com) Disability insurance (short/long-term) (glassdoor.com) Life insurance + AD&D coverage (glassdoor.com) Employee Assistance Program (mental health/support services) (glassdoor.com) 15 days pto, 5 sick and safety Workplace Type This is a fully onsite position in Milltown,NJ. Application Deadline This position is anticipated to close on Jun 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description High-Rise Restoration, Forensics & Building Envelope Engineering A leading structural engineering and building restoration consulting firm is seeking a Director of Structural Engineering to lead complex restoration and forensic engineering projects. This role is focused on high-rise residential, commercial, and mixed-use buildings, with an emphasis on façade restoration, structural rehabilitation, and compliance-driven inspections. The ideal candidate will bring strong technical leadership, forensic expertise, and experience navigating New York City building regulations and inspection requirements. Key Responsibilities • Lead structural engineering and restoration projects across New York City and surrounding markets, • Serve as Engineer of Record and provide technical oversight for all structural deliverables, • Manage multidisciplinary teams and oversee day-to-day engineering operations, • Lead façade assessments, structural evaluations, Local Law compliance inspections, and restoration programs, • Prepare and review engineering reports, calculations, specifications, and construction documents, • Conduct forensic investigations involving structural failures, building movement, water infiltration, and construction defects, • Oversee construction administration including field observations, RFIs, submittals, and contractor coordination, • Maintain quality assurance and technical consistency across all projects, • Develop client relationships with property owners, developers, condominium boards, and asset managers, • Mentor engineering staff and support strategic growth initiatives RequirementsQualifications • Bachelor’s or Master’s degree in Structural or Civil Engineering, • PE license in New York required; SE license preferred, • 8+ years of experience in structural engineering and building restoration, • Strong experience with NYC high-rise buildings, façade systems, and Local Law inspections preferred, • Expertise in structural analysis, restoration detailing, and forensic engineering, • Strong understanding of NYC Building Code, ASCE, ACI, AISC, and building envelope systems, • Proficiency with ETABS, RAM, SAFE, RISA, Revit, and restoration documentation, • Excellent communication, leadership, and project management skills BenefitsCompensation & Growth • Base salary range: $150,000–$230,000 depending on experience, • Annual performance bonus, • Executive leadership growth opportunity, • Opportunity to lead flagship restoration and forensic projects in the New York market

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, North Carolina, the company serves both residential and commercial customers across new construction and Repair and Remodel markets. Our portfolio includes vinyl windows, siding, stone veneer, metal roofing, metal wall systems, and accessories, supported by a broad, multi-channel distribution platform and a strong national manufacturing footprint. At Cornerstone Building Brands, safety, quality, continuous improvement, and environmental responsibility are embedded in our culture. We are committed to delivering products that meet or exceed customer expectations while contributing positively to the communities where we live and work. Job Description The Quality Assurance Supervisor is responsible for supervising and directing Quality Technicians across 1st and 2nd shifts, ensuring the effective execution of plant quality processes and compliance with enterprise and plant quality standards. This role serves as the frontline quality leader, supporting the Quality Manager by driving daily quality performance, enforcing standards, coaching technicians, and responding to quality issues in a fast-paced manufacturing environment. The Quality Assurance Supervisor works closely with Manufacturing, Engineering, and other cross-functional teams to support production while protecting the customer through effective inspection, testing, corrective action, and continuous improvement activities. This position ensures that quality expectations are consistently applied across shifts and that technicians are trained, engaged, and performing to standard. Key responsibilities include: • Supervise, direct, and support Quality Technicians on 1st and 2nd shift to ensure consistent execution of quality inspection, testing, and documentation requirements, • Enforce adherence to plant and enterprise Quality Systems, standard work, code and compliance requirements, and customer specifications, • Coordinate daily quality activities in support of production schedules while maintaining focus on Initial Quality, defect prevention, and non-conformance management, • Provide technical guidance, coaching, and feedback to technicians related to inspection methods, test procedures, root cause analysis, and corrective actions, • Review and approve quality data, inspection records, and reports for accuracy and completeness, • Lead or support containment, corrective action, and error-proofing activities in collaboration with Manufacturing, Engineering, and the Quality Manager, • Lead and participate in continuous improvement activities, including kaizen events, root cause analysis, and standard work development focused on quality, safety, and defect prevention, • Identify quality trends, risks, and systemic issues, escalating concerns and supporting sustainable countermeasures, • Support internal audits, layered process audits, and compliance activities as required, • Host, support, and participate in visits from external parties including auditors, suppliers, customers, and certification bodies; provide plant tours and explain quality processes, controls, and product conformance as needed, • Participate in training, onboarding, and ongoing development of Quality Technicians, • Ensure effective communication and handoff of quality issues between shiftsQualifications, • Bachelor’s degree in Quality, Engineering, Manufacturing, or a related technical field preferred; equivalent experience may be considered, • 3 to 5 years of experience in quality assurance or manufacturing quality within a production environment, • Prior supervisory or lead experience with technicians or hourly associates strongly preferred, • Working knowledge of quality systems, inspection and test methods, non-conformance management, and corrective action processes, • Experience interpreting engineering drawings, specifications, and quality or regulatory requirements, • Familiarity with Lean manufacturing principles, continuous improvement, and basic quality tools, • Strong organizational and time management skills with the ability to manage multiple priorities, • Effective verbal and written communication skills, including the ability to present information to internal and external stakeholders, • Detail-oriented with strong problem-solving and decision-making abilities, • Proficiency with basic computer applications and quality documentation systems Additional Information All your information will be kept confidential according to EEO guidelines. The Quality Assurance Supervisor plays a critical role in reinforcing plant quality culture and ensuring consistent quality execution across shifts while supporting plant, customer, and enterprise quality objectives. "The total target compensation for this role is $80,000 - $110,000. All full-time positions come with comprehensive benefits starting on day 1, including medical, dental, vision coverage, 401k, and PTO. Your recruiter will provide more details on the specific salary range for your preferred location during the hiring process. Full-time is defined as regularly working 30+ hours per week." Address Location: 1 Silverline Drive, North Brunswick, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description Outside Sales Representative - Fire and Security Systems - Total Compensation to 120k/year - Somerset, NJ • Our client is a full-service fire protection and security systems provider supporting commercial, industrial, and municipal clients across New Jersey, New York, and Pennsylvania. Services include design, installation, inspection, and maintenance of fire alarm systems, sprinkler systems, suppression systems, access control systems, CCTV/video surveillance, intrusion systems, gas detection, and life safety equipment., • This is a field-based Outside Sales role responsible for driving new business and expanding existing accounts throughout Northern New Jersey area, with periodic meetings (twice monthly) in Somerset, NJ. Fire protection industry sales experience is required for this position. Responsibilities: • Generate new business across fire protection and electronic security systems through outbound prospecting and relationship development, • Sell service agreements, inspections, monitoring, system upgrades, retrofits, and new installations, • Conduct on-site walkthroughs to assess fire and security systems, identify code compliance gaps, and recommend solutions, • Prepare and deliver proposals for fire alarm systems, sprinkler systems, suppression systems, access control systems, CCTV/video surveillance, intrusion systems, and monitoring services, • Manage full sales cycle from prospecting through close, • Maintain CRM activity including calls, meetings, proposals, and pipeline tracking, • Develop relationships with facility managers, property managers, general contractors, safety/EHS teams, and business owners, • Coordinate with internal operations, design, and technical teams to scope and execute projects, • Maintain working knowledge of applicable fire and building codes including NFPA standards, • Consistently meet or exceed sales activity metrics and revenue targets, • Attend industry events, trade associations, and networking functions to generate leads, • Travel throughout assigned territory using personal vehicle (mileage reimbursed) Qualifications: • Prior sales experience within the fire protection systems industry, required, • Outside sales experience with responsibility for prospecting, pipeline management, and closing business, • Experience conducting site walkthroughs, system assessments, or solution-based sales presentations, • Ability to travel throughout Northern New Jersey area, • Ability to meet customer site access requirements, which may include background checks or other screenings Compensation: • Total compensation for this position consists of a base salary in the 65k - 75k/year range, plus commission; estimated first year ramp up on target earnings of 110k - 120k/year (expected to increase after year one), • Uncapped commission structure, • Medical insurance, • 401k with 3% employer contribution (safe harbor), • 3 weeks PTO, • Car allowance or travel reimbursement #INDALL

Job DescriptionDescription: The Quality Inspector for metal stamping plays a crucial role in ensuring that all products manufactured meet specified quality standards and customer expectations throughout the production cycle. This position involves rigorous inspection processes, collaboration with various teams, and a commitment to continuous improvement to uphold the integrity of our products. Requirements: Key Responsibilities: · Thoroughly examine incoming raw materials to verify compliance with established specifications and quality standards. · Document and communicate material discrepancies to suppliers and internal stakeholders to facilitate timely resolutions. · Conduct systematic and detailed inspections at various stages of the metal stamping process, including during setup and ongoing production runs. · Utilize precision measurement tools, such as calipers, micrometers, and coordinate measuring machines (CMM), to assess dimensions, tolerances, and overall component integrity. · Execute comprehensive evaluations on finished products, ensuring conformity to engineering specifications, customer requirements, and regulatory standards. · Prepare and maintain detailed inspection reports, highlighting any non-conformities and recommending corrective actions as necessary. · Perform functional, durability, and performance testing on products, if applicable, to guarantee they meet operational requirements. · Analyze and interpret test results to identify trends, potential defects, and opportunities for process enhancements. · Work closely with production supervisors, engineers, and other team members to address quality issues effectively and implement corrective actions. · Actively participate in cross-departmental meetings focused on quality improvements, safety initiatives, and production efficiency. · Maintain rigorous documentation of all inspections, tests, and quality control processes to ensure traceability and compliance with industry standards. · Prepare and present quality performance reports to management, including analysis of quality metrics and any corrective actions taken. · Ensure adherence to all quality management protocols, industry standards (such as ISO or TS standards), and company policies. · Assist in conducting internal and external audits, providing necessary documentation and insights related to quality control practices. Qualifications: · High school diploma or equivalent; a technical degree in quality control, engineering, or a related field is preferred. · Proven experience (2+ years) in quality inspection, specifically within a metal stamping or manufacturing environment. · Strong analytical skills with a keen attention to detail and the ability to identify and document defects clearly. · Proficient in using various inspection tools and measurement devices, with familiarity in computer software for data analysis and reporting. · Excellent problem-solving abilities, strong communication skills, and the capacity to thrive in a fast-paced manufacturing environment. Physical Requirements: · Ability to stand for extended periods while conducting inspections and use precision measurement equipment. · Capability to lift and maneuver materials and products weighing up to 25 pounds as needed. Work Environment: · The role is primarily performed in a manufacturing floor setting, with exposure to machinery, metalworking processes, and varying temperatures. · Adherence to safety protocols and wearing personal protective equipment (PPE) is mandatory. This enhanced job description provides a detailed overview of the responsibilities, qualifications, and working conditions for a Quality Inspector in metal stamping, emphasizing the importance of quality assurance in the manufacturing process. Benefits: · Competitive salary based on experience and qualifications, with opportunities for overtime pay. · Comprehensive health benefits package, including medical, dental, and vision coverage. · Retirement savings plan with employer match to help secure your financial future. · Access to ongoing professional development and training opportunities to enhance your skills and career growth in the industry. Application Process: Interested candidates should submit their resume along with a cover letter highlighting their relevant experience and qualifications to jmartinez@precisonxmfg.com

Job Description Resident Engineer with experience on projects with the New Jersey Turnpike and Garden State Parkway. Must be a PE in NJ or a NICET IV and at least 12 years’ experience in the highway and bridge construction inspection field, plus a minimum of 8 years of experience as a Resident Engineer on highway and bridge projects with at least 4 of those years as a Resident Engineer on projects for the New Jersey Turnpike Authority. Additional concrete, asphalt, and traffic control certifications are a plus. Great benefits. Annual bonuses based on performance and company profits. Only qualified candidates need to reply. Company provides training for necessary certifications. Other possible incentives. PLEASE DO NOT APPLY IF YOU LIVE OUTSIDE THE NYC TRI-STATE AREA. Company DescriptionVery good company with incentives for good performance.Very good company with incentives for good performance.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development Position: Lead Cooling Tower Cleaning Technician / Supervisor (Commercial) Reports to: Mitigation Project Manager Employment Type: Full Time Position Description: The Lead Cooling Tower Cleaning Technician / Supervisor is responsible for leading and executing commercial cooling tower cleaning projects while ensuring work is completed safely, compliantly, on schedule, and to company standards. This role requires extensive hands-on experience with commercial and industrial cooling towers, strong knowledge of Legionella prevention practices, and the ability to supervise field crews, interface with clients, and oversee regulatory compliance. The Lead Technician serves as the on-site authority for safety, quality control, and documentation. Key Responsibilities Technical & Cleaning Operations • Lead and perform cleaning, disinfection, and inspection of commercial cooling towers, including basins, fill, drift eliminators, sumps, strainers, and associated components, • Execute startup, shutdown, emergency, and corrective cleanings, • Verify proper isolation, lockout/tagout, and system protection prior to cleaning, • Ensure cleaning and disinfection procedures comply with CDC, ASHRAE, NYS/NJ DOH, and local regulationsCrew Leadership & Supervision, • Supervise, train, and direct technicians on job sites. Ensure safety protocols, • Conduct job hazard analyses (JHAs) and pre-job safety briefings, • Ensure compliance with OSHA standards, including confined space entry, fall protection, and chemical handling, • Oversee adherence to Legionella management plans and site-specific safety requirementsDocumentation & Quality Control, • Ensure accurate completion of service reports, inspection checklists, and photographic documentation meeting regulatory and client standardsRequired Qualifications, • Minimum 2+ years of hands-on experience cleaning commercial cooling towers, • Prior experience leading or supervising field crews, • Strong working knowledge of:, • Commercial and industrial cooling tower systems, • Legionella control, prevention, and remediation practices, • Chemical cleaning, disinfection, and safety protocols, • Ability to work at heights, in confined spaces, and in outdoor/industrial environments, • Clean background check. No criminal history or drivers license issues., • Support emergency response and after-hours work as neededPreferred / Certifications, • NY or NJ Commercial Pesticide Applicator License, • OSHA 30 certification, • Confined Space Entry certification, • Fall Protection certification, • Healthcare or hospital cooling tower experience, • Bilingual (English/Spanish) a plus, • PPE Mask Medical clearance approvedJob Compensation and Benefits:, • Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities, • Monthly cross-training opportunities to advance your career, • Paid training, • Health insurance, • Referral program, • Great culture and team dynamic, • Bonus opportunities based on performance and sales goals. No caps on bonus.Why The Team Needs You? Serving others in their time of need is not easy. We will need you to build foundational relationships based on trust, actively listen, and find ways to manage a team to complete projects successfully. We also want a fun personality that enjoys getting results.

Job Description WHO IS HILLIS-CARNES? Hillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic and Florida. We have demonstrated a history of success for the past 35 years. We are 100% employee-owned ESOP, and our history of success can be attributed to our motivational employee owners. We believe in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement. General Responsibilities Candidate will work with our geotechnical and materials testing/inspections departments and be responsible for a wide variety of projects for public and private sector clients. Duties may include but are not limited to; general geotechnical engineering practice including the preparation of geotechnical reports/calculation, technical support of field staff, review of construction inspection daily field reports, and occasional project site field visits related to the projects you are involved in. This position is currently listed as non-managerial but depending on the qualifications of the applicant could be re-categorized as a Managing Principal. Requirements • Local to the Northern New Jersey region or willing to relocate, • Bachelor and/or Master of Science in Civil Engineering, Geological Engineering, or similar ABET accredited Engineering degree, • 12+ years of progressive experience in the geotechnical engineering consulting industry., • Professional Engineering (P.E.) license in New Jersey or the ability to obtain such license through reciprocity within 3 months of hire date., • Willingness and ability to mentor junior staff. Preferred Qualifications. • Local Northern New Jersey market experience including local industry relationships., • Familiarity with geotechnical software (i.e., tablogs/Tablabs, L-Pile, SLIDE, Settle 3D, MSEW, etc.)., • Strong oral and written communication skills., • Strong business development skills and experience., • Ability to interpret engineering and construction plans/specifications., • Experience with senior review of geotechnical reports prepared by staff engineers. We are a proudly an employee-owned company and we believe our employees should have the best benefits! Hillis-Carnes' benefits package which includes paid holidays, generous paid time off, medical (with Health Savings Account options), dental, vision, long-term and short-term disability, 401k plan with a company match, Employee Stock Ownership Plan (that means you have ownership in the company upon eligibility), employee assistance plan, company events, wellness program, employee self-service site, and much more. Hillis-Carnes is an Equal Opportunity Employer/Affirmative Action Employer Minorities and Women are encouraged to apply. Job Posted by ApplicantPro

Job Description Regional Sales Manager - Fire Protection About the Company Confires Fire Services is an affiliated company of Guardian Fire Protection and trusted provider of comprehensive fire protection and life safety solutions, proudly serving businesses throughout New Jersey, Eastern Pennsylvania, and Northern Delaware for more than 40 years. Headquartered in South Plainfield, New Jersey, Confires delivers inspection, testing, monitoring, installation, and repair services across a wide range of systems such as fire alarms and monitoring, fire sprinklers, kitchen fire suppression, special hazard systems, fire extinguishers, exit and emergency lighting, and integrated security solutions that include access control systems and CCTV. Known for its strong customer‑first culture, technical expertise, and commitment to code compliance, Confires partners with customers across diverse industries to protect lives, property, and assets. Our People & Culture At Confires and our affiliated companies, our people are the foundation of our success. We're committed to hiring and developing talented, passionate professionals who share our mission to protect lives and property. As we continue to grow, we offer meaningful career opportunities within a dynamic organization focusing on customer service, technical expertise, collaboration and long-term success. Learn more at www.Confires.com About the Opportunity Confires Fire Protection Service is seeking a results-driven and experienced Regional Sales Manager to serve as a player-coach, leading and expanding our multi-brand sales operations across New Jersey, New York, and Pennsylvania. This high-impact leadership role oversees both inside and outside sales teams, with responsibility for accelerating revenue growth, improving conversion rates, and fostering a high-performance, accountability-driven sales culture. The RSM is expected to meet and exceed both individual and team sales targets. The Regional Sales Manager (RSM) is responsible for driving regional revenue growth, expanding market presence, and strengthening customer engagement. This role provides leadership, direction, and development for a regional sales team while actively contributing to strategic sales initiatives, complex deal execution, and the cultivation of long-term client relationships. The RSM plays a critical role in aligning sales strategies with operational capabilities, regulatory requirements, and evolving market conditions. The ideal candidate will demonstrate a consistent track record of exceeding sales objectives, a strong ability to coach and develop sales professionals at all levels, and the strategic insight necessary to drive performance across a diverse portfolio of fire inspection, security systems, and project-based fire protection services. Job Duties Sales Leadership & Team Development • Lead, mentor, and manage inside and outside sales team of 5-10 members across assigned region(s), • Set clear performance expectations and hold team members accountable to activity metrics and revenue targets, • Conduct regular pipeline reviews, ride-alongs, and call coaching sessions to develop sales skills, • Drive consistent growth across three core service lines:, • Fire Inspection Sales (recurring inspection and service agreements), • Security System Sales (access control, CCTV, intrusion, and monitoring), • Project-Based Sales (fire sprinkler, fire alarm, and kitchen suppression system installation), • Own regional revenue targets and manage performance to monthly, quarterly, and annual goals, • Meet and exceed personal quota targets for large key account expansion within the region, • Manage key customer relationships within region focusing on full share of wallet, • Develop and refine pricing strategies in partnership with operations and senior leadership, • Enforce consistent use of Salesforce and HubSpot for pipeline tracking, forecasting, and reporting, • Deliver regular forecasts and performance reporting to senior leadership, • Identify and pursue new market opportunities across commercial, industrial, and Multi-family residential segments, • Collaborate with marketing on lead generation, campaign alignment, and inbound lead handling, • Support the expansion of cross-sell and upsell programs across the Guardian family of brands Personal Sales Targets & Account Management • Carry and exceed personal sales quota focused on key accounts and share of wallet expansion, • Build and maintain strong, long-term relationships with key decision-makers, including building owners, property managers, contractors, facility managers, • Serve as a senior-level point of contact for strategic and high-risk accounts, • Ensure customer needs are accurately translated into service and installation solutions, • Address customer escalations proactively and partner with operations to resolve issues quickly and effectively, • Promote customer retention, renewals, upselling, and cross-selling of fire protection services, • Champion a customer-first mindset across the regional sales team Qualifications Required • 5–7 years of sales management experience, preferably in a service-based or trades industry, • Demonstrated track record of consistent sales outperformance, quota attainment, team growth, or market expansion, • Experience managing both inside sales (phone/email-based) and outside sales (field-based) teams, • Proficiency with CRM platforms (Salesforce, HubSpot, or similar), • Excellent coaching, communication, and leadership skills, • Ability to travel across the assigned region as needed Preferred • Previous field sales experience in fire protection, life safety, security, or a related industry, • Familiarity with fire inspection services, NFPA codes, or related technical knowledge, • Experience selling project-based or construction services, • Background managing multi-branch or multi-brand sales teams Compensation • This is a salaried position - salary is negotiable depending on candidate experience, • Quarterly bonus opportunities, • Monthly commissions Benefits • 401K with a company match, • Medical, Dental and Vision Insurance, • Company paid Short Term Disability, • Company paid Long Term Disability, • Company paid Life and AD&D insurance, • Pre-tax accounts for health and dependent care, • Aflac, • Vacation and Personal time, • Paid holidays, • Tuition Reimbursement Confires Fire Protection Service, LLC. is an Equal Employment Opportunity (EEO) employer and prohibits employment discrimination for employees and applicants based on his or her age, race, color, pregnancy, gender, gender identity, sexual orientation, national origin, religion, marital status, citizenship, or because he or she is an individual with a disability, protected veteran or other status protected by federal, state, and local laws. Job Type: Full-time This link leads to the machine-readable files that are made available in response to the federal Transparency in Coverage Rule and includes negotiated service rates and out-of-network allowed amounts between health plans and healthcare providers. The machine readable files are formatted to allow researchers, regulators, and application developers to more easily access and analyze data.

Job Description The Lot Driver operates motor vehicles on and off the premises for transport, pickup and delivery in support of auction activities. Safely move, stage, and park vehicles in the correct lot area to support the flow of vehicles for the car auction. Pay Range: $16.50-$17 hourly Schedule: Monday to Friday Working hours: 7:30 AM - 4:30 PM Clean Background & Valid Drivers License w/ Clean Driving Record Required • Drive vehicles to and from designated areas, as well as pick up and deliver vehicles while observing auction driving rules, rules of the road and demonstrating courteous and defensive driving principles., • Drive assigned vehicles through auction lanes on sale day., • Verify VIN of cars being picked up and or delivered against transportation requests., • Line up and park vehicles in the correct order as directed by the Lot Manager, Team Leader or designated supervisor., • If necessary, inflate tires and jump-start vehicles using a battery box and air tank., • Fill the gas tank when the vehicle is out of gas., • Assist customers such as dealers, account reps, and co-workers as needed., • Perform walk-around each vehicle prior to moving vehicle and note damage. Qualifications: • Must be at least eighteen (18) years of age., • Must be qualified to operate a motor vehicle and possess a valid driver's license., • Basic computer skills are required., • Ability to work outdoors under any type of weather conditions. PERKS & BENEFITS: • 401K with company match, • A great wellness program to keep you healthy and happy both physically and mentally, • Access to opportunities to expand your skill set and share your knowledge with others across the organization Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Medium Physical Work, • Frequent – standing, watching, touching, listening, walking, talking, • Potential – running, jumping, yelling or other rapid or forceful movement in emergency situations, • Visual acuity requirements include color, depth perception and field of vision comparable to definitions for Clerical, Administrative, Machine Operators (including inspection) positions. Physical Working Conditions This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. • Note: Refer to the Handbook and Policy Manuals for important addendum requirements to all job descriptions. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. About Us ADESA, a Carvana-owned company, is currently operating over 50 locations throughout the US. Our Auto Auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionDescriptionCME Associates is seeking a highly qualified and experienced Inspector to join our team in Parlin, NJ. The ideal candidate will have a minimum of 3 years of experience in inspecting public projects and will preferably hold NICET I certification. As an Inspector, you will play a critical role in ensuring the quality, safety, and compliance of public projects. Responsibilities • Project Inspection: Conduct thorough inspections of public projects, including roads, bridges, utilities, and other infrastructure, to ensure compliance with design specifications, codes, and regulations., • Documentation: Maintain detailed and accurate records of inspection findings, including photographs, reports, and other relevant documentation. Prepare inspection reports for clients and regulatory authorities as needed., • Quality Control: Collaborate with project managers and engineers to identify and address construction and design issues promptly, ensuring the quality and safety of the project., • Compliance Monitoring: Monitor contractors and subcontractors to ensure they adhere to project plans, specifications, and safety protocols, taking appropriate actions to address non-compliance., • Communication: Effectively communicate with project stakeholders, including clients, contractors, engineers, and regulatory agencies. Provide clear and concise updates on project progress, issues, and resolutions. Qualifications • Experience: A minimum of 3 years of experience in inspecting public infrastructure projects, such as roads, bridges, and utilities, is required., • NICET I: NICET (National Institute for Certification in Engineering Technologies) Level I certification in a related field is highly preferred., • Knowledge: Strong knowledge of construction methods, materials, and industry standards, including relevant codes and regulations., • Communication Skills: Excellent written and verbal communication skills to effectively interact with project stakeholders and prepare detailed inspection reports., • Attention to Detail: Meticulous attention to detail and a commitment to maintaining accurate records and documentation. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y

We also offer a $100 hiring bonus! In addition, we offer a $300 cash bonus, paid upon completion of U-Haul Equipment Inspection and Verification through our 1-2-3 Punch Certification Program at retail stores.

Cardinal Health - - Responsibilities: Follow SOPs to process orders including picking, quality checks, sorting, packing, and preparing shipments; Operate material handling equipment such as forklift, order picker, pallet jack, and walkie rider; Cross-train in multiple warehouse areas and participat

Support audits, safety inspections, and external regulatory reviews as the technical representative for the plant.

The North Plainfield School District, a culturally diverse school community in Somerset County serving 3,700 students Pre-K through grade 12. At North Plainfield, we unlock potential and create impact everyday. Experience required working as a Journeyman in electrical field.

Perform PM inspections and corrective maintenance to standard.

You should have excellent customer service skills, troubleshooting skills, field experience, and the ability to adapt to a changing work schedule.

You should have excellent customer service skills, troubleshooting skills, field experience, and the ability to adapt to a changing work schedule.

NIET III/IV Certifications and experience in construction inspection required. Ability to maintain field and office records and perform quantity computations. Responsible for construction inspection of major infrastructure rehabilitation project.