Trabajos field inspection en Wayne, New JerseyCrear alertas

Job Description About Legacy Construction Management Legacy Construction Management, Inc. is a New Jersey-based construction management firm specializing in public sector work, primarily K-12 school construction and municipal building projects across Essex, Somerset, Passaic, and Union Counties. We serve as Owner's Representatives, embedded on-site with our clients to protect their interests from groundbreaking through closeout. Our team operates with a direct, hands-on approach, and every Project Manager we hire carries real responsibility from day one. The Role We are hiring multiple full-time, on-site Project Managers to serve as Owner's Representatives on active public building construction projects. Each PM is assigned to a single client and functions as that client's primary point of contact with the construction team, the architect, and all project stakeholders. This is a field-based role. You will be on-site daily, observing work in progress, enforcing contract compliance, and keeping projects on schedule and within budget. You will not be managing from an office. Day-to-Day Responsibilities • Observe contractor work daily to verify compliance with contract documents, plans, and specifications, • Serve as the Owner's on-site representative in all project meetings, including OAC meetings, progress meetings, and subcontractor coordination meetings, • Facilitate communication between the Owner, architect, engineer of record, general contractor, and subcontractors, • Review submittals, RFIs, and change order requests for completeness and contract compliance, and coordinate timely review by the architect, • Maintain organized and current project records, including meeting minutes, correspondence logs, inspection reports, and punchlist documentation, • Track project schedule and budget against baseline; identify deviations early and escalate with supporting documentation, • Provide regular written progress reports to the Owner and Legacy principals, • Bachelor's degree in construction management, engineering, or architecture preferred; candidates without a degree but with substantial equivalent field experience as a Construction Project Manager will be considered, • 10 years of project management experience on public building construction projects with contract values of $15 million or more preferred, • Direct experience with general construction and HVAC systems strongly preferred, • Proficiency with MS Office; experience with project management software is a plus, • Strong written and verbal communication skills; ability to manage relationships with owners, design professionals, and contractors simultaneously, • Demonstrated ability to read and interpret construction documents, track submittals and RFIs, and manage change order documentation, • Salary: $90,000 – $100,000 per year, commensurate with experience, • Health insurance, • Retirement plan Submit your resume to [application link or email]. Legacy Construction Management is an equal opportunity employer.

Supplier Quality Engineer Overview: The Supplier Quality Engineer (SQE) position is responsible to develop positive, partner-oriented relationships with members of MCI’s Supply Chain to continuously improve and monitor supplier performance through auditing and the application of quality tools and performance metrics. The SQE must be a self-motivated individual who possesses the ability to analyze, organize, plan and prioritize assignments/tasks to achieve desired results. This position requires effective interaction with a broad spectrum of people to successfully support operations, customer requirements and the corporate strategic vision. Main job responsibilities: • Identify improvement projects and manages cross functional implementation to improve supply chain performance, • Promote the use of Quality tools and continuous improvement techniques at suppliers to reduce variability, achieve process control and improve the overall quality of processes, systems and MCI’s product(s)/materials., • Develop positive relationships and effective lines of communication with suppliers (partnership-oriented), • Train suppliers to effectively execute Supplier Corrective Action Requests (SCAR), Quality Alerts, Corrective/Preventive Actions (CAPA) implementation, change control and root cause analysis, • Perform periodic audits and evaluate Supplier Quality Systems/processes and flow down of customer requirements to assure conformance to requirements., • Collect and evaluate supplier quality data and performance metrics to manage the Supply Chain score card system., • Recommend suppliers for qualification and/or disqualification based on quality performance, • Evaluate supplier processes, collaborate with suppliers on process improvement and value enhanced opportunities, • Ensure effective communication with MCI Engineering, Operations, Quality Engineering and Procurement to identify opportunities for quality and productivity improvements, • Working directly with suppliers, create corrective action plans and effectively resolve identified issues, • Organize and assume a lead role in presenting the status of “Active Supplier Quality” issues, • Ability to provide training in an effective manner, • Foster a positive, cooperative, and safe work environment through effective communication at all levels of the Marotta organization, • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements Additional job responsibilities: • Foster a positive, cooperative and safe work environment through effective communication at all levels of the Marotta organization, • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements Minimum Requirements: • Minimum of a bachelor’s degree in Mechanical/Electrical/Manufacturing Engineering, • Knowledge of, or experience in a manufacturing/testing environment (Aerospace preferred) Knowledge in the areas of Circuit Card Assemblies (CCA’s) inclusive of IPC J STD-001E/NASA STD-8739 and IPC 610 standards and requirements, • Knowledge of Machining and Measurement processes and equipment., • Minimum of (1) year Quality/Design/Manufacturing Engineering Experience – Supplier Quality field experience preferred, • Knowledge of, or experienced in the areas of special processes (ex. plating, painting, weld, etc.), AS9100 & ISO system standards/requirements, P.O. review/approval, ESD, Foreign Object Debris/damage (FOD) Controls, performance metrics and System/Process audits, • Ability to interpret Military, Commercial aircraft and Space level specifications, dwg’s, and standards, • Knowledge of, or demonstrated track record in the area of Lean concepts, variability analysis, SPC/Process controls, root cause analysis, failure Mode Effects Analysis (FMEA), Six Sigma tools, System/Process auditing, etc., • Knowledge of or experienced use of various measuring/inspection instruments (Coordinate Measuring Machine (CMM), Vision System, mechanical instruments, etc.), • This position requires the eligibility to obtain a security clearance, therefore you must be able to obtain/maintain a security clearance, • Must be a US Citizen Other job requirements: • Must be Computer literate (MS Excel/Word/PowerPoint), flow chart and statistical/analytical software packages, • Strong interpersonal, written, time management, analytical, statistical, problem solving, communication and organizational skills, • Demonstrate the ability to read, interpret documents (i.e. procedures, schematics/technical drawings, etc.), • Position requires a detail-oriented individual who can multi-task, provide leadership (project/assignment related), work in a fast-paced environment and communicate issues in a timely/effective manner. Work Environment: • While performing the duties of this job, the employee is potentially exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, printers/scanners/copier machine, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Some travel may be required for this position (50% travel), • Full time position Physical Requirements: • While performing the duties of this job, the employee is regularly required to talk and hear., • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • This position requires the ability to skillfully use measuring instruments, hand tools, • The employee may be required to lift, push, pull and/or move items weighing up to 50 pounds Salary - $87,500 - $115, 000 We offer a highly competitive compensation package for this outstanding position plus a quarterly bonus along with a full range of top quality benefits and employee services including: medical, prescription, dental, vision, life and disability income insurance programs, 401k retirement plans with company match, generous tuition aid program, paid vacation, sick and personal days, paid holidays and flexible work hours with compressed work week options. We recognize and reward our employee's accomplishments and host several employee engagement events per quarter. This position is at our Parsippany, NJ corporate offices location. Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. If you are looking to grow or accelerate your career and be part of a best-in-class organization while enjoying a work-life balance, please apply! We are an Affirmative Action and Equal Opportunity employer M/F/IWD/Veterans VETERANS ARE ENCOURAGED TO APPLY As a Federal Contractor, Marotta is required to have all employees vaccinated against COVID-19 or qualify for a religious or medical exemption. No agencies, please.

Senior Quality Engineering Manager We are seeking a highly skilled Senior Quality Engineering Manager with proven experience in CMM applications. The ideal candidate will bring extensive knowledge of GD&T, first article inspections, and advanced quality planning processes to ensure our products meet the highest standards of precision and compliance, with a hands-on leadership style and a commitment to continuous improvement and regulatory compliance. Key Responsibilities: • Review and interpret complex engineering drawings with expertise in GD&T., • Lead First Article Inspection Reporting (FAIR) in compliance with AS9102., • Support development and qualification of alternate inspection frequency plans per AS13002., • Drive APQP / PPAP processes to ensure effective quality planning and execution., • Utilize conventional measurement tools (calipers, micrometers, height gages, etc.) for verification., • Leverage CMM experience (programming preferred) for precision inspection., • Conduct root cause analysis and implement RCCM (Root Cause Counter Measures). Qualifications: • Bachelor’s degree in Engineering, Quality Management, or a related field (or equivalent industry experience)., • Minimum 8 years of quality leadership experience in a manufacturing environment for aerospace or defense., • Proven experience with AS9100, NADCAP, and other quality standards., • Strong knowledge of NDT techniques and inspection best practices., • Experience managing cross-functional teams and leading audits., • Strong communication, organizational, and documentation skills., • Proficiency with ERP and quality management systems (QMS). Preferred: • CMM programming experience., • Prior experience in a highly regulated aerospace environment.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Qualified Cpsi - Certified Playground Safety Inspector - Field Inspectors For Insurance Loss Control.

We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance underwriters. Qualified Field Inspectors for Insurance Loss Control.

We have provided insurance underwriting Loss Control inspection reports since 1970 and we work directly with insurance Underwriters. Qualified Cpsi - Certified Playground Safety Inspector - Field Inspectors For Insurance Loss Control.

Job DescriptionSignature is looking to add Field Consultant for the following counties: Bergen, Union, Morris, Somerset, Passaic Are you looking for a new career that allows you to work independently, is flexible, and challenging everyday, then we have a new and exciting career for you! Get in Front of Our Recruiter Faster! To ensure your application is reviewed quickly, apply directly on our careers page: Career Site For 30 years, Signature Companies () has been the industry leader and innovator in providing quality, professional and unparalleled service to our client partners. At Signature Companies we are a High Value Insurance information provider, dedicated to superior customer service, superior quality, and superior time service. Signature Companies is looking for self-starting, self-motivated and self-directed independent contractors (1099) who are creative and knowledgeable in their field and who possess an entrepreneurial spirit to work an area of their choosing, around the area in which they live. We can provide a supplement to your current income or become your main source of income. Experience in Insurance Adjusting, Home Appraisals, Real Estate or Construction is a plus. Experience using Rapid Sketch, Xactimate, CAD or other diagramming programs will be helpful. As a Field Consultant, you will be responsible for scheduling and conducting on-site High Value Property Surveys. This involves coordinating and completing surveys within your own schedule, managing work assignments you accept and timely completion of web-based reports. You will visit properties, take photos and measurements, and make note of issues which should be brought to the underwriter’s attention. Our experienced and dedicated Field Management team will provide mentoring and support to help you learn and excel at Signature Companies. Details of position: -Work from your home office. • Professionally interact over the phone, via email, and in-person with homeowners and insurance agents., • Drive to and conduct on-site property surveys on high value homes as per customer specific guidelines and procedures., • Identify and document the construction materials/characteristics and unique features of the home., • Obtain measurements of the home and other structures on the property., • Generate an estimated replacement value of the home and identify major hazards., • Communicate the information gathered during on-site inspection in loss control 360 accessed through the Signature website RequirementsRequirements and Tools needed: • Prior underwriting experience is desirable., • Prior inspection experience on residential homes is desirable., • Loss control experience desirable., • Strong oral and written communication skills, • Professionalism is key, • Construction experience desired, but not required., • BA or BS degree desired, but not required., • Must have smartphone, tablet and personal computer., • A late model reliable vehicle and Auto and General Liability Insurance., • High speed internet, Digital Camera or Smart phone with 16mp camera or greater, measuring devices such as: laser, soft tape measure, or measuring wheel.

Job Description Mission The Quality Engineer plays a critical hands-on role in ensuring PTI Tech delivers precise, reliable components that meet the demanding standards of aerospace, defense, and other high-reliability industries. This position combines inspection, metrology, and engineering analysis to ensure products meet specifications while continuously improving manufacturing processes. The role begins with strong involvement in inspection and measurement systems while developing engineering capabilities in statistical analysis, root cause problem solving, and process validation. Over time, the engineer will grow into advanced metrology programming and quality engineering leadership responsibilities. This position is ideal for a motivated early-career engineer who is passionate about manufacturing, highly detail-oriented, and eager to learn measurement technology, data analysis, and structured problem solving. Competencies – What This Person Must Be Hands-On Inspector & Measurement Specialist - Develop strong capability in dimensional inspection using calipers, micrometers, optical systems, and coordinate measuring equipment. Interpret engineering drawings and GD&T to verify product conformance. Developing Metrology Programmer - Learn and progressively support programming and operation of advanced measurement systems including CMM, optical vision systems, and automated inspection equipment. Calibration & Measurement System Steward - Support the management of the calibration system to ensure all gages, instruments, and fixtures remain accurate, traceable, and compliant with AS9100 and customer requirements. Data-Driven Problem Solver - Use structured methods such as 8D, 5 Whys, and Ishikawa analysis to investigate defects and identify sustainable corrective actions. Process Control Advocate - Support statistical process control, capability analysis, PFMEA, control plans, and Gage R&R studies to strengthen measurement reliability and process stability. Metrics-Driven: Uses data analysis to monitor trends, reduce scrap, and eliminate recurrence of quality issues. Standards-Focused - Apply AS9100, ISO 9001, and customer quality requirements in daily operations, documentation, and investigations. Sense of Ownership & Urgency - Demonstrate initiative, accountability, and responsiveness when addressing quality issues affecting production or customers. Cross-Functional Collaborator - Work closely with manufacturing, engineering, and production teams to ensure requirements are clearly understood and processes remain capable. Key Responsibilities Inspection & Measurement • Perform dimensional inspection of components using manual tools, optical systems, and automated measurement equipment., • Interpret engineering drawings, tolerances, and GD&T to verify product conformance., • Support and progressively learn CMM, OGP, and Keyence inspection systems., • Assist in the development and refinement of inspection methods and inspection fixtures., • Document inspection results and maintain accurate inspection records. Quality Engineering Support • Drive quality improvements through Gage R&R studies, Statistical Process Control (SPC), Six Sigma, and Lean Manufacturing tools., • Support Gage R&R studies and measurement system evaluations., • Participate in root cause investigations for internal and customer quality issues., • Perform root cause analysis using structured problem-solving methods (8D, 5 Whys) and verify the effectiveness of corrective and preventive actions (CAPA)., • Assist with First Article Inspection Reports (AS9102), Production Part Approval Process (PPAP-AS9145), and validation activities., • Analyze scrap, defect, and process data to identify trends and improvement opportunities. Calibration & Measurement Systems • Support the management of the calibration system to ensure all gages and measurement equipment remain compliant and traceable., • Maintain calibration records and coordinate calibration activities with external vendors., • Assist in investigations when measurement equipment is found to be out of tolerance., • Ensure measurement systems remain reliable and capable of supporting production requirements. Key Metrics & KPI’s • ≥ 98% Quality Shipments, • ≥ 90% Gage R&R Pass Rate, • 100% on-time completion of assigned inspections., • 100% On-Time Calibration Compliance, • ≥ 1.33 Cpk for Stable Processes, • ≤ 3% Internal Scrap Rate on assigned processes, • ≥ 95% CAPA Effectiveness, • ≥ 95% On-Time Submission of FAIRs, PPAPs, SCAR’s, and CAPA’s, • ≥ 95% Documentation Accuracy Rate Required Experience and Qualifications (Subject to Management Discretion) • Bachelor’s degree in Mechanical, Manufacturing, or a related Engineering field, • Strong interest in manufacturing, metrology, and quality systems., • Ability to read and interpret engineering drawings and strong GD&T., • Strong analytical and problem-solving skills., • Strong written and verbal communication skills., • Proficiency in Microsoft Excel and basic data analysis. Preferred Qualifications • ASQ Certified Quality Engineer (CQE) or other ASQ or Six Sigma certification, • Hands-on inspection experience including CMM, optical, or non-contact methods, • Experience with CMM programming & operation (Zeiss – Calypso strongly preferred), • Experience in defense, aerospace, or medical device industries Physical Requirements • Ability to stand and walk on the production floor for extended periods, • Capable of lifting up to 40 lbs and accessing production and inspection equipment, • Manual dexterity for handling tools, parts, and inspection equipmentCompany DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 38-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\n\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job Description Apply HERE OnlyMortgage Field Services Inspector (Independent Contractor) FAR Inspections is a leading provider of property data for mortgage lenders nationwide. Based in Reno, NV, we have a 12-year track record of excellence and stability in the mortgage field services industry. We partner with highly motivated independent contractors who prioritize accuracy, reliability, and professional autonomy. The Opportunity Earn a predictable supplemental or full-time income on a flexible schedule that you control. As a Field Inspector, you will perform residential occupancy verifications. These are brief, exterior visits to confirm property status and report on general conditions. • Autonomy: You manage your own routing, schedule, and territory., • Efficiency: Standard inspections are designed for speed, typically requiring only 5–6 minutes on-site., • Consistency: Enjoy stable, month-to-month volume in your assigned county.Workflow & Responsibilities, • Determine property occupancy status based on industry-standard indicators., • Capture 9+ photos and submit brief reports using industry-standard mobile applications., • Reliable, fuel-efficient vehicle., • Smartphone (Android or iPhone) capable of running mobile reporting apps., • Computer with an internet connection and a printer., • Ability to pass a standard background check., • Strong time-management skills to meet deadlines without direct supervision.Earnings & Volume, • Flat-Rate Pay: This is a 1099 position where you are paid a set fee for every inspection completed., • Earning Potential: While pay is per-inspection, efficient contractors typically earn the equivalent of $25-$35 per hour., • Volume: Rates and inspection volume vary by county. Lower volume counties typically feature higher per-inspection rates, while higher volume counties offer more consistent daily work. Apply HERE Only

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Dental insurance, • Health insurance Title: Mechanical Engineer Entry Level Reports To: Works under the Lead Engineer Position Summary As a Mechanical Engineer 1 within our R&D / Engineering team, you will design parts, assemblies, and fixtures for new and revised products under the supervision of a Senior or Lead Engineer. You will collaborate with cross-functional engineering teams to support product development, system integration, flow systems, and electrical control solutions for industrial applications. This role is ideal for a hands-on engineer eager to learn, contribute, and grow in a fast-paced and innovative environment. Essential Functions • Design, develop, and analyze technical products and systems under the supervision of lead engineers, • Set up and conduct experimental and performance testing for new or existing products (under supervision), • Maintain accurate records of all experimental and performance tests, • Create and update product documentation, • Create or modify Bills of Materials (BOMs) for new or custom products, • Review and release Engineering Change Notices (ECNs), • Apply fundamental engineering principles during assembly trials for evaluation and design feedback, • Assist in constructing and debugging prototypes and simple assembly fixtures, • Troubleshoot printed circuit boards (PCBs) and control systems, • Collaborate with QA to develop and maintain procedures in compliance with ISO standards, • Work in a team environment to analyze customer requirements and develop custom solutions, • Follow all established safety guidelines and company procedures, • Perform additional duties as assigned, • Bachelors degree in Mechanical Engineering or a closely related field, • Minimum 3 years of experience in a mechanical/electronic engineering environment, • Proficiency in SolidWorks or similar MCAD software (required), • Familiarity with PDM environments and 3D printing software (preferred), • Experience with inspection and/or 3D scanning equipment (preferred), • Working knowledge of Altium or similar PCAD software (preferred), • Proficiency in Microsoft Office Suite and standard communication tools, • Strong statistical data analysis and problem-solving skills, • Ability to use measuring devices and hand tools, • Basic experience with machining equipment (preferred), • Ability to effectively report progress and issues through dashboards, • Strong teamwork skills and collaborative mindset, • Excellent verbal communication and presentation skills, • Eagerness to learn and develop new technical skills, • Adaptability and flexibility in a dynamic, fast-paced environment, • Able to lift at least 30 lbs.

Job Description Overview Locations: Williamstown Pay Rate: $19.25-21.25 Hourly commensurate with relevant Adult IDD job experience Schedules Available: Saturday/Sunday AM Thursday 11p-9a/Friday 11p-7a Hourly Join a Team That Changes Lives For more than 170 years, Elwyn has been leading the way in supporting children, teens, and adults with autism, intellectual and developmental disabilities, and behavioral health challenges. As a mission-driven nonprofit, we’re here to create real change – helping people lead meaningful, fulfilling lives. Now, we’re looking for passionate team members to join us. Here, your work will change lives – including your own. You’ll make an impact every day, find purpose in what you do, and grow in a career that truly matters. At Elwyn, we take care of you while you care for others. We offer: • Generous Paid Time Off, • Comprehensive Medical/Dental/Vision Benefit Packages, • Earned Wage Access/On-Demand Pay, • Paid On-the-Job Training, • Tuition Reimbursement, • Career Advancement Opportunities and Growth, • Flexible Schedules, • Retirement Savings Plan Join us and be a part of something bigger. Apply today. Responsibilities POSITION SUMMARY: The Group Home Behavior Technician provides direct support to people with developmental disabilities who exhibit acute challenging behaviors in a clinically-driven Applied Behavioral Analysis (ABA) residential program. DUTIES AND RESPONSIBILITIES: • Manages, trains, transports and supervises the activities and functions of all individuals in addition to maintaining the home/day program in a safe, clean and healthy manner, • Assists individuals in occupational, recreational, vocational and therapeutic programs including, but not limited to, off-site day program/work area/locations, • Assists individuals in the independent management of his/her affairs, which may include , but are not limited to, personal hygiene, meal preparation, clothing maintenance, personal health maintenance, money management, household maintenance, employment habits, recreational activities and/or other duties or responsibilities which provides/assists the individuals to live in a caring environment, • Implements and documents all documentation assigned and required including, but not limited to, skill development, behavior management/behavior support plans, emergencies, habilitation plan, maintenance, reinforcement schedules, token economies, pictures schedules, etc., • Attends house meetings to review and discuss program affairs, • Serves as a member of the team by adhering to all current policies and procedures of the facility, as well as, participating and promoting a home-like environment for the individuals, • Maintains current state-mandated training and certifications, • Follows all current policies and procedures of Elwyn New Jersey, • Cooperates with Elwyn New Jersey and the State of New Jersey Department of Human Services, or any other authorized investigating body during an inspection, inquiry, or investigation, • Maintain certifications and perform cardiopulmonary resuscitation (CPR), safe crisis management and intervention, and medication administration using agency-trained protocols, • Must be at least 18 years of age, • High School Diploma or graduate equivalency diploma (GED); certificate and/or associates degree preferred in related field, • Minimum of one (1) year of experience providing direct care to individuals with intellectual and developmental disabilities in a residential or group home environment, • Experience working with individuals with acute behaviors preferred, • Previous knowledge /training in areas of applied behavior analysis or applied behavioral strategies, including, but not limited to, reinforcement schedules, token economy programs, picture schedules, etc. preferred, • Previous knowledge/training with individuals who utilize augmentative communication devices preferred, • Complete, pass, and maintain certifications for all required trainings as designated for position, including but not limited to advanced safety care training and Elwyn New Jersey enhanced behavior support training, • Must be available to attend house meetings as scheduled, • Demonstrated ability to work effectively as part of a team, • Ability to work in a fast-paced environment and manage and prioritize multiple, often competing, priorities, • Demonstrated strong attention to detail, • Demonstrated strong time management and organizational skills, • Demonstrated excellent judgment with the ability to independently solve problems and make decisions with little or no need for direct supervision, • Demonstrated ability to anticipate future needed changes or identify problem areas and take effective actions, • Must be able to perform CPR and safety care using agency-trained protocols, • Must possess good customer interaction, collaboration, and written and verbal communication skills, • Demonstrated basic experience with Microsoft Office applications, including Word, Excel, and Outlook preferred, • Must cooperate with Elwyn New Jersey staff, the Department of Human Services staff, or, any other authorized investigating body during an inspection or investigation, • Must submit to a criminal background check and drug test and be determined to be not disqualified by the New Jersey Department of Human Services prior to working with individuals served, • Must agree to have their name checked against the New Jersey Central Registry of Offenders Against Individuals with Developmental Disabilities and NJ Child Abuse Registry (CARI). #ZR Company DescriptionFor more than 170 years, Elwyn has been leading the way in supporting children, teens, and adults with autism, intellectual and developmental disabilities, and behavioral health challenges. As a mission-driven nonprofit, we’re here to create real change – helping people lead meaningful, fulfilling lives. Now, we’re looking for passionate team members to join us. Here, your work will change lives – including your own. You’ll make an impact every day, find purpose in what you do, and grow in a career that truly matters. At Elwyn, we take care of you while you care for others.For more than 170 years, Elwyn has been leading the way in supporting children, teens, and adults with autism, intellectual and developmental disabilities, and behavioral health challenges. As a mission-driven nonprofit, we’re here to create real change – helping people lead meaningful, fulfilling lives.\r\n\r\n\r\n\r\nNow, we’re looking for passionate team members to join us. Here, your work will change lives – including your own. You’ll make an impact every day, find purpose in what you do, and grow in a career that truly matters.\r\n\r\nAt Elwyn, we take care of you while you care for others.

Job DescriptionBenefits: • 401(k), • Health insurance Position Summary: A well-established precision manufacturer in the aerospace and defense sector is seeking a Director of Quality to lead its quality management systems across casting, machining, and assembly operations. This leadership role is critical to ensuring compliance with industry regulations, driving continuous improvement, and maintaining the highest standards of quality in production. Key Responsibilities: • Develop, implement, and maintain a robust Quality Management System (QMS) aligned with AS9100, ISO 9001, and Nadcap standards., • Lead internal and external audits, customer quality interactions, and regulatory compliance initiatives., • Oversee dimensional and metallurgical inspection processes, including CMM, GD&T, and non-destructive testing., • Drive root cause analysis and implement corrective and preventive actions (RCCM, 8D, CAPA)., • Manage all First Article Inspection (FAI) and PPAP/APQP activities, including documentation under AS9012 and AS13002., • Collaborate with cross-functional teams (engineering, operations, supply chain) to improve process capability and product quality., • Analyze quality KPIs and initiate continuous improvement programs to reduce scrap, rework, and customer complaints., • Mentor and develop a high-performing team of quality engineers, inspectors, and technicians., • Role is on-site and not eligible for remote work.Qualifications:, • Bachelors degree in Engineering or a related technical field required; advanced degree a plus., • Minimum of 10 years of progressive quality leadership experience in aerospace, defense, or high-precision manufacturing., • Extensive knowledge of quality standards and regulatory frameworks: AS9100, ISO 9001, Nadcap, ITAR., • Experience managing audits and customer approvals (e.g., Boeing, Lockheed, Raytheon, Honeywell)., • Strong background in metrology, GD&T, and non-destructive testing., • Familiar with lean manufacturing, Six Sigma methodologies, and ERP systems.

Job DescriptionYou’ve Never Been Satisfied with "Good Enough." You want to make an impact, not just manage projects, but change how the world gets built. At Accenture Infrastructure & Capital Projects, you’ll do exactly that. You’ll help develop and deliver the factories, grids, transit systems, and public infrastructure that keep communities moving - and do it smarter, safer, and more sustainably than ever before. You’ll work alongside people who think big and act bold - project managers, engineers, technologists, and strategists who blend real-world experience with digital innovation and AI. Together, we’re transforming how capital projects are planned, managed, and executed, creating a better way to build for the future. Because “good enough” builds the past. You’re here to build what’s next, on a team that outperforms every norm. Visit us here to learn more about Accenture Infrastructure & Capital Projects THE WORK: • You’ll work directly with project manager, field manager, MEP manager and project executive to help review and implement project goals and ensure project goals are achievable., • You’ll oversee various aspects of project controls and provide direct assistance to ensure timely project execution., • You’ll be responsible for all project administration including management of the project management system., • You’ll participate in project meetings and client presentations, documenting discussions, action items, and decisions to ensure clear communication of goals, timelines, and deliverables with the project team, clients, stakeholders, and contractors., • You’ll support the management of projects from construction through closeout, with both internal and external project teams., • You’ll administer the critical project construction processes such as Submittals, RFIs, Meeting Agendas & Minutes, Sign-in Sheets, Inspection Logs, Closeout Procedures to ensure timely and accurate documentation and approvals, and assist in the review of the contractor’s schedule, Payment Applications, and all requests for change orders., • You’ll assist with the month’s reports and general project support., • You’ll assist the field managers with daily reports, photos, inspections, and punch list items., • You’ll develop and maintain strong working relationships with clients to enhance repeat business opportunities and ensure long-term partnership success.Onsite at client site: The work location for this role is onsite with our clients and partners to enable delivery and cultivate our client relationshipsWith all our roles, there is some in-person time for collaboration, learning and building relationships with clients, peers, leaders and communities. As an employer, we will be as flexible as possible to support your specific work/life needs.HERE'S WHAT YOU'LL NEED:, • A bachelor’s degree in Construction Management, Construction Engineering Technology, Architecture, Engineering, Facilities Management, or related field.BONUS POINTS IF YOU HAVE:, • OSHA 30 Certificate, • Bluebeam Experience

Job Description Job Type: Full-Time Schedule: Monday-Friday Location: FairLawn, NJ Pay Range:$30-$36 depending on skills Responsibilities: • Perform thorough, accurate preventative maintenance inspections., • Able to diagnose and repair emission related problems., • Following schedules, complete all required maintenance operations including lubrication, fluid changes, brake adjustments, and tire rotation., • With direction from the Fleet Maintenance Supervisor, performs unscheduled maintenance as needed., • Performs complex operations including engine, electrical, fuel, brake, and exhaust repairs and field tests. This requires interpreting and working from drawings, specifications, and other technical materials., • Perform emergency roadside services as needed., • Inspection of equipment and diagnose mechanical defects., • Document repairs and parts on work orders completely and accurately, • Maintain tools and workplaces so that conditions are neat and orderly., • Performs other duties as required., • Emergency conditions may require on call service calls, extended hours, or weekend work flexibility., • May, on occasion, be required to drive vans, buses, and vehicles to perform road tests etc., • Perform other duties as required., • Assist with maintaining cleanliness of assigned bus. 5+ years’ experience (A level) as a diesel mechanic or mechanic. • Accreditation from a school or certification program, • Complete all training requirements, • Opportunities for career growth and advancement, • Safety-first environment with comprehensive training & ongoing learning development opportunities, • Special recognition opportunities for exemplary safety and performance, • Dedication to supporting local communities through different charities, partnerships, and events, • Appreciation events, holiday parties, and birthday recognitions throughout the year, • Corporate culture that promotes the safety & well-being of children and families through our fundraising partnership with St. Jude Children’s Research Hospital The below statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. STA is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants; returning military are strongly encouraged to apply. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law.

Job Description Preconstruction Project Manager (Commercial Solar) Location: Hawthorne, NJ About the Role: We are seeking a Preconstruction Project Manager with experience in C&I distributed generation solar EPCs to support our expanding portfolio of commercial renewable energy projects. The Preconstruction Project Manager (Precon PM) is responsible for managing the full preconstruction lifecycle. This position requires strong technical understanding of solar PV systems, excellent communication skills, and the ability to coordinate cross-functionally with Engineering, Construction, Procurement, and Finance. The Precon PM reports to the Director of Preconstruction and must be located near Hawthorne, NJ with hybrid flexibility and travel to job sites as needed. Key Responsibilities: RFP Management & Technical Review • Review and interpret drawings, specifications, geotechnical reports, surveys, and contract documents., • Develop a comprehensive understanding of project scope, contract requirements, risks, and deliverables., • Lead the full preconstruction lifecycle: kickoff, Q&A, clarifications, addenda review, and submission coordination., • Perform detailed quantity takeoffs, material counts, and system component validations., • Collaborate with Estimating to validate scope, phasing, and manpower projections., • Develop complete and normalized bid comparisons (bid-leveling) and perform subcontractor/vender descopes., • Build and maintain cost databases, benchmarking tools, and historical cost libraries., • Collaborate closely with Engineering and Procurement to analyze multiple design options and provide value-engineering recommendations (racking, modules, inverters, electrical topology, structural considerations, etc.) based on codes, AHJ requirements, equipment availability, and constructability., • Manage the entire subcontractor RFP process, including distribution of bid packages, NDAs, clarifications, evaluations, and award recommendations., • Prequalify subcontractors and maintain updated capability, cost, and performance records., • Coordinate with racking vendors and geotechnical/pull-testing providers to obtain required data prior to bid., • Coordinate with utilities to evaluate interconnection requirements, timeline, fees, and scope impacts., • Research permitting requirements, zoning constraints, and local code amendments for each jurisdiction., • Engage with AHJs to understand inspection sequences, fire code constraints, and design requirements affecting project cost., • Develop preliminary construction schedules in partnership with Engineering, Construction, and Project Management., • Identify permitting, interconnection, structural, geotechnical, supply-chain, and schedule-driven risks., • Create bid-level risk logs and mitigation plans., • Prepare early project budgets and establish financial control frameworks., • Set up preconstruction documentation in Procore, including bid packages, submittal logs, and scope definitions., • Lead internal page-turn and handoff meetings to ensure smooth transition from estimating to execution teams., • Lead lessons-learned sessions post-project and drive implementation of recommendations., • Review actual cost data from completed projects to refine estimating accuracy., • Track subcontractor field performance feedback and incorporate into future bid strategies., • Identify process inefficiencies and propose creative, practical solutions to improve organizational performance., • 3+ years of preconstruction, estimating, or project management experience at a Solar EPC (C&I DG preferred)., • Experience with subcontractor tendering, bid-leveling, and contract negotiation is required., • Experience developing or reviewing solar PV designs (electrical, structural, civil) is strongly preferred., • Bachelor’s degree in Construction Management, Engineering, or related field preferred., • Strong proficiency in Microsoft Excel (advanced functions), MS Office, and MS OneNote preferred., • Experience with Procore, Bluebeam, Smartsheet required., • Ability to prioritize and manage multiple concurrent deadlines., • Strong organizational, data-entry, and project management skills., • Clear written and verbal communication with strong technical documentation skills., • Exceptional note-taking, retention, and follow-through abilities., • Analytical mindset with strong mathematical and problem-solving skills., • Understanding of NEC solar PV requirements (Articles 690, 705, etc.) preferred., • Ability to perform basic structural and electrical design reviews., • Natural curiosity, ownership mentality, and a drive for continuous improvement., • Competitive Salary, • Performance-Based Bonuses, • Employee Referral Bonuses, • Matching 401(k), • Health, Dental, and Vision Insurance, • Health Reimbursement Account, • Life, AD&D, Accident, Disability, and Critical Illness Insurance, • Paid Time Off and Paid Holidays, • Employee Discount Program, • Paid Time Off and Paid Holidays Applicants must be authorized to work in the United States without the need for current or future employment sponsorship. Pfister Energy, Inc. is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all individuals feel valued and respected. We do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other legally protected status. Company DescriptionPfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.Pfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals.\r\n\r\nWe are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.

Job DescriptionYU & Associates is an established Engineering Firm located in Bergen County (North Jersey), New Jersey. The Candidate will be working on both small- and large-scale projects and should have diverse civil engineering experience in the New York Metropolitan area. The candidate will be working on designing mixed-use developments, residential, higher education, transportation, and other exciting land development projects. The successful candidate must possess strong technical skills. The candidate will be responsible for assisting with the preparation of construction plans, specifications, technical reports, and proposals. Duties and Responsibilities: • Effective planning organizing, estimating, scheduling and monitoring of work activities., • Thorough and accurate technical reports, correspondence, documentation, calculations and sketches., • Maintain accurate records and files., • Represents the company positively and professionally.Required Qualifications:, • BS in Civil Engineering required, MS preferred., • EIT is strongly preferred., • Willingness to attain P.E., • Minimum 3 years of civil consulting and field inspection experience., • Experience with AutoCAD Civil 3D and/or MicroStation V8i and Microsoft office is required., • Ability to create custom maps using GIS and CADD, • Understanding of basic engineering theories and principles., • Understanding of basic practices of researching engineering and design issues, evaluating alternative, making sound recommendations and preparing and presenting recommendations., • Effective oral and written communication skills., • Complementary skills or experience relative to our present staff., • Field and office assignments, as required.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off and 401k retirement plan with company match. YU & Associates is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR Tg9hwQ7aLX

Job Description Calibration TechnicianOverview:Essential or Primary / Key Responsibilities:- Performs various complex duties classified as moderate inclusive of calibration, maintenance and repairs of tools and equipment in line with established SOP's. • Maintains appropriate calibration documentation and records, including computer data entry and filing of reports., • Performs calibration and approve products and accessories that meet tolerances and product specifications., • Troubleshoots and performs repairs on equipment to assure proper calibration is achieved and maintained., • Inspects, maintains and repairs or facilitates the repair of all calibration and calibrated equipment., • Coordinates with production and engineering departments for internal and external customers., • Prepares all documentation applicable for various assignments, • Monitors and completes all business tasks within timeframe and ensure optimal quality., • Develops all reports and certificates pertaining to calibration., • Performs inspection and calibrate all tooling equipment with help of electronic and pressure equipment and ensure accuracy., • Maintains control and traceability related to tooling inside shop and outside vendors., • Assists various departments to resolve and repair of equipment which determine precision., • Gathers and documents the data records related to calibration., • Issues and receives into established software, gauges and inspection equipment., • Tracks gauge history in established software data base., • Plans sequence of testing and calibration procedures for instruments and equipment., • Sets up standard and special purpose laboratory equipment to test, evaluate, and calibrate other instruments and test equipment., • Devises formulas to solve problems in measurements and calibrations., • 2 years of related experience/training, or equivalent combination of education and training in calibration field or ASQ recognized Calibration Technician Certification, • Computer literate, with MS Office/PC expertise, and demonstrated experience with applicable systems, programs, equipment, etc., • Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, • This position entails constant exposure to abrasive chemicals, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • This is a full-time position. Days and hours of work are 8 hours, Monday through Friday. Overtime and weekend work may be requested, as job duties demand, • The employee is frequently required to repetitively use/reach with hands and arms, and to use hands to finger, handle or feel., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus., • The employee is regularly required to stand at length, sit, walk, stoop, climb stairs, bend, turn, balance, and/or crouch, and move about the facility and outside the facility. You should be proficient in: • National Aerospace and Defense Contractors Accreditation Program (NADCAP), • Experience in a Manufacturing Environment

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job DescriptionRole: Experienced Gutter Installer We truly believe in investing in our employees and creating a work culture unlike any other. We also offer huge opportunities for growth. This is an experienced position, and the ultimate candidate will have at least 2+ years of skilled gutter and/or exterior construction experience. A positive attitude is a must, as well as the ability to properly, and comfortably interact with clients and other employees. You will be groomed for leadership in the field, to be part of a family, and to grow with an established brand. Find out why our culture is at the core of being a Top 100 Culture Award Winner and an official Certified Great Place to Work! Experienced Gutter Installer Requirements: • 2+ years of experience in gutter installation including both K-style & half round gutters, • A positive attitude, • Excellent communication skills, • Ability to work outdoors in all weather conditions/seasons, • Interest in growing with the company, • Willingness to work overtime, • Be a team player, • A desire to establish a positive work culture, • OSHA certification and/or ladder safety training preferred Experienced Gutter Installer Minimum Requirements: • Construction/Gutters: 2+ years, • Must be 18 or older The Brothers That Just Do Gutters is a rapidly growing, locally owned, and operated franchise with multiple locations across the country. Our mission is to "Reinvent Contractor Service" by providing a great place to work and delivering 5-star service every step of the way from initial phone inquiry, home visit, inspection and estimate, scheduling, timeliness, installation, follow-up, and ongoing support and service. We want to do what's right for our employees, customers, and communities. Apply today!

Job Description National Insurance Inspection Services, is a property inspection company currently seeking a Field Representative to service Dundee, NJ & other surrounding areas, cities, and counties. You will be instructed to perform residential property inspections and is responsible for accurate and timely completion and submission of field reports of the residential properties via our website. No licensing or certifications required. Some experience is preferred and a construction or housing background is helpful. Responsibilities include: • Accept electronic inspections as they are ordered, • Complete the inspection in the field by following guidelines and proper requirements, • Returning completed inspections electronically via our website on the internet from home, • Previous experience in property management or other related fields, • Familiarity with real estate contracts and leases, • Ability to build rapport with the insureds, • Ability to multitask and prioritize, • Computer skills, • High speed internet, • Reliable transportation, • Navigation skills, • Digital Camera (preferred for photos), • Must submit to a background check and have a clean MVRCompany DescriptionHeadquartered in the heart of California, 'National Insurance Inspection Services' is a leading provider of high quality property insurance inspections, catering to the specific needs of property and casualty insurance companies and agencies around the country. With over 40 years in the loss control inspection industry, and millions of inspections completed, we know what it takes to meet and exceed expectations – it’s what we strive for every day. That’s why many of the nation’s top insurance carriers have chosen to partner with us for their loss control inspection programs. From new business, to renewal projects and everything in between, we have the knowledge, experience and technology to get the job done.Headquartered in the heart of California, 'National Insurance Inspection Services' is a leading provider of high quality property insurance inspections, catering to the specific needs of property and casualty insurance companies and agencies around the country.\r\n\r\nWith over 40 years in the loss control inspection industry, and millions of inspections completed, we know what it takes to meet and exceed expectations – it’s what we strive for every day. That’s why many of the nation’s top insurance carriers have chosen to partner with us for their loss control inspection programs. From new business, to renewal projects and everything in between, we have the knowledge, experience and technology to get the job done.

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Assists in the conduct of civil, environmental, and geotechnical engineering related services, • Performs tasks to make Staff Engineer/Associates more efficient, • Assists with inspection of compacted fills, utilities, asphalt, concrete, sitework elements, • Experiments with new growth strategies and ideas to develop technical skills, • Conducts geotechnical engineering laboratory tests, • Prepares samples of materials for laboratory testing, • Performs research and data entry, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Must have strong attention to detail with excellent analytical and willing to spend the majority of work hours in the field., • BS in Civil Engineering or related field with a Minimum cumulative GPA 3.0., • Excellent written and verbal communication skills., • Valid Driver's License and possess reliable transportation to access job sites., • Able to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Able to apply concepts of basic algebra and geometry., • Proficient or familiarity with AutoCAD, NitroPro, MS Word, Excel, Adobe. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Hourly Rate: $17/hr. -$21/hr., + overtime & mileage reimbursement.

Job DescriptionDirector of Quality - Manufacturing Director of Quality Position Overview We are seeking an experienced Director of Quality to lead and advance our quality organization in a fast-paced manufacturing environment. The Director will develop and maintain a robust quality management system, ensure compliance with regulatory and customer requirements, drive continuous improvement, and partner with manufacturing, engineering, procurement, and leadership to deliver high-quality products on schedule. This role combines strategic leadership with hands-on problem solving to sustain product integrity, improve process capability, and enhance customer satisfaction. Key Responsibilities • Define and implement the company quality strategy and roadmap aligned with business objectives and manufacturing priorities., • Lead, mentor, and grow the quality organization including quality engineers, inspectors, and system administrators., • Develop, document, maintain, and continuously improve the Quality Management System (QMS) to meet internal, customer, and regulatory requirements., • Ensure compliance with applicable standards and regulations (e.g., AS9100, ITAR, NADCAP where applicable) and manage external and internal audits., • Oversee supplier quality management program including qualification, performance monitoring, corrective actions, and supplier development., • Direct root cause analysis and corrective/preventive action (CAPA) activities for product and process nonconformances., • Establish, monitor, and report on key quality metrics (e.g., PPM, DPMO, OTD related to quality) and use data to drive decisions and continuous improvement., • Drive process capability and reliability initiatives using Lean and Six Sigma methodologies to reduce variation, waste, and costs., • Manage metrology and inspection capability requirements, including calibration, measurement systems analysis (MSA), and laboratory controls., • Coordinate cross-functional problem solving with engineering, production, procurement, and program management to resolve quality risks and support new product introductions., • Represent the company to customers, auditors, and regulatory authorities on quality matters; lead customer quality reviews and resolve escalations., • Develop and manage quality department budget, staffing, training, and performance objectives.Qualifications, • Required: Proven experience in Manufacturing and Quality Management with a minimum of 10 years in progressively responsible quality roles within a manufacturing environment., • Required: Demonstrated leadership experience managing cross-functional quality teams and programs at a senior level., • Required: Strong knowledge of quality systems, auditing, CAPA, FMEA, control plans, and measurement system analysis., • Required: Excellent problem-solving skills with experience leading root cause analysis and corrective actions., • Required: Experience working with suppliers and managing supplier quality performance., • Education: Bachelors degree in Engineering, Manufacturing, Quality, or related technical field; advanced degree preferred., • Nice to have: Experience in Aerospace or Defense industries and familiarity with industry-specific requirements., • Nice to have: Hands-on knowledge of AS9100 implementation and surveillance audits., • Nice to have: Familiarity with ITAR compliance and export control considerations., • Nice to have: NADCAP experience or auditor familiarity for special processes., • Nice to have: Strong metrology background, including calibration and MSA experience., • Nice to have: Practical experience with Lean manufacturing and Six Sigma (Black Belt or Green Belt preferred)., • Health, dental, and vision insurance, • 401k with company match, • Paid time off, • Paid holidays - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/02/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Maitra Associates, P.C. (Maitra), an established multi-disciplined engineering design and construction management firm serving the needs of various clients in the transportation, institutional, and facilities markets, seeks both recent graduates and experienced civil engineers with 0-6 years of experience for its growing land development group. Projects will include roads, underground utilities, public buildings, recreational facilities, and land use applications. You will participate in the design of various infrastructure projects for the public sector- municipalities, state agencies, and local school districts- and the private sector, both commercial and residential, and report directly to the Project Manager. Duties: • Engage in valuable interactions with external clients, • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Assist in preparing construction documents, including drawings and specifications for site layout, grading, drainage, utilities, soil erosion, sediment control, and landscaping., • Estimate quantities and materials, equipment, or labor costs to determine project feasibility., • Assist in stormwater management design., • Perform construction support services, including providing timely data, shop drawing review, and client coordination., • A supportive and flexible work environment that empowers employees to stay healthy, fulfill their passions, and balance work and life goals., • The opportunity to advance your career., • A Learning & Development department that facilitates ongoing soft and technical skills training, • Complete visibility and exposure to all aspects of a project, • Open and transparent communication with senior leadership as well as local office management., • Bachelor’s degree in civil engineering or related field, • The ability to learn quickly, strong communication skills, and a solid work ethic, • A passion for design and creative problem-solving, • Familiarity with government rules and regulations for stormwater management design, • Practical experience with civil engineering software (AutoCAD Civil3D)Company DescriptionMaitra Associates, P.C. (Maitra) is an established multi-discipline engineering design and construction management firm serving the needs of various clients in the transportation, institutional, and facilities markets. Since our founding in 1982, Maitra has grown from a two-person office to a regional firm headquartered in Bedminster, New Jersey and with offices in New York. We aim to award, manage, and complete projects in the Northeast and Mid- Atlantic Regions. Maitra offers professional services in several disciplines, including civil/site engineering, electrical engineering, mechanical engineering, and construction management and inspection. The firm’s diverse staff comprises experienced professionals who provide client-focused, technically superior, cost-effective engineering and construction inspection services within an interdisciplinary team environment. Maitra is entrepreneurial in spirit, reflecting a culture of flexibility, innovation, and responsiveness while providing the in-depth resources of a full-service organization.Maitra Associates, P.C. (Maitra) is an established multi-discipline engineering design and construction management firm serving the needs of various clients in the transportation, institutional, and facilities markets. Since our founding in 1982, Maitra has grown from a two-person office to a regional firm headquartered in Bedminster, New Jersey and with offices in New York. \r\n\r\nWe aim to award, manage, and complete projects in the Northeast and Mid- Atlantic Regions. Maitra offers professional services in several disciplines, including civil/site engineering, electrical engineering, mechanical engineering, and construction management and inspection. \r\n\r\nThe firm’s diverse staff comprises experienced professionals who provide client-focused, technically superior, cost-effective engineering and construction inspection services within an interdisciplinary team environment. Maitra is entrepreneurial in spirit, reflecting a culture of flexibility, innovation, and responsiveness while providing the in-depth resources of a full-service organization.

Job Description Job Summary: The focus of this position is upon manufacturing support, quality planning, problem solving, training, quality system maintenance, continuous improvement. Provides Quality Engineering coordination of quality planning activities that ensure products and processes are designed, validated, procured, manufactured and inspected in accordance with customer and company quality assurance requirements. This role requires work in our Fairfield and Byram locations. Primary Responsibilities: • Maintains and improves Quality systems such as Calibration, Document Control, Non-conformance, Corrective Action, Management Review, Audits, Material Return, Material Review Board, etc., • Uses ability to interpret and analyze blueprints to develop and facilitate the creation of Product Quality Plans, Process Failure Mode and Effects Analysis, Control Plans and Inspection Instructions. Develops and initiates standards and methods for inspection, and evaluation of products and processes. Collects data tied to appropriate statistical techniques and sampling plan., • Develops and implements means for the use and reporting of statistical and capability studies in the manufacturing process., • Maintains, coordinates activities and systems, and makes improvements to quality systems such as Non-Conformance, Material Returns, Gage and Tooling Calibration, etc., • Assist in performing failure analysis for products and processes using problem solving tools and techniques. Troubleshoots processes to improve and correct quality issues., • Supports Quality Manager in various activities including cross-functional teams in formal and informal continuous improvement activities (i.e. developing and improving baseline Cpks, reducing scrap and rework, improving first time yields, reducing costs). Prepares reports, graphs and charts (level I-III) to describe trends, pin point areas of focus for improvement opportunities, or to provide information, • Maintains a thorough knowledge of all manufacturing and quality assurance systems i.e. Lot Acceptance, Military Specs, Design Qualification Testing, and quality assurance systems, i.e. First Article Inspection, Calibration of inspection equipment, inspection methods, techniques and gages, etc and, • Documents non-conformances and conducts preliminary reviews. Conducts preliminary review and analyzes non-conformance data to identify opportunities for corrective, preventive or continuous improvement opportunities., • Writes, revises and releases technical procedures and work instructions as necessary. Identifies opportunities for improvement and recommends changes to system documents., • Performs and hosts audits of quality systems, products, and processes, internal and external (suppliers/subsidiaries)., • Adheres to safety practices and procedures and follows overall CAD procedures & policies, procedures tied to ISO 9001/AS9100 and other QMS requirements., • Adheres to the Controlled Unclassified Information (CUI) policies and procedures related to NIST 800-171 and completes all required CUI Awareness training, which includes collection, processing/handling, transmission, storage, and general safeguarding practices., • Maintains the confidentiality of all information processed. Performs related duties as assigned. Regular and consistent attendance is required. While performing the duties of this job, the employee is occasionally required to stretch, bend, kneel and stoop and perform work behind a safety shield. The employee is regularly required to walk, communicate, and reach with hands and arms. The employee is frequently required to sit, stand, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds using appropriate moving devices. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. Work environment: While performing the duties of this job, the employee maybe at times be exposed to solder, fluxes, cleaners, epoxies, and masking agents while using appropriate personal protective equipment. Safety apparatus/ measuring devices are required to be used when performing tasks involving both X-Ray and Leak Tester. Work is performed in a temperature-controlled environment. The noise level in the environment is usually low to moderate. Essential Skills: Subject Matter Understanding. Analytical. Computer Applications. Project Management. Critical Thinking. Problem Solving. Attention to details. Use of basic inspection measuring equipment/test equipment, (i.e.) power supplies, oscilloscope, ohmmeter. Job Qualifications: Required: Bachelor's degree in an Engineering, or Technical field of study. All candidates are required to have excellent verbal and written communication skills; strong organizational and interpersonal skills; attention to detail, imitative and ability to prioritize multiple projects; experience in team facilitation and problem solving, knowledge of Root Cause Analysis, Failure Modes, and Effect Analysis, Quality Reporting and Analysis, Flowcharting and Procedure Analysis; knowledge of in Capability Analysis, process control of product, developing controls plans and statistical techniques . Preferred: Working knowledge of ISO 9001, AS9100, and / or similar quality system standards and Microsoft Office. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

Job Description Bogush Mechanical Company (Public Sewer Service Division) is a leading full-service sewer, drain, and environmental services company serving New Jersey for over 60 years. Our diversified operation includes sewer and drain cleaning, jet/vacuum services, pipeline inspection, grease trap maintenance, and underground utility repair. Our Grease Trap Division is growing rapidly, and we are looking for a driven, detail-oriented professional to help manage operations while actively contributing to sales growth and customer retention. Position Overview We are seeking a Service Dispatcher / Sales & Operations Coordinator who can effectively manage daily field operations while also driving revenue, maintaining strong customer relationships, and ensuring accurate administrative and payroll reporting. This is a hands-on role requiring strong communication, organization, and accountability. The ideal candidate is both operationally sharp and sales-minded, with a focus on efficiency, profitability, and accuracy. Key Responsibilities Dispatch & Operations • Schedule and dispatch 4–6 field technicians and service vehicles, • Optimize daily routes for efficiency, profitability, and responsiveness, • Coordinate planned maintenance, emergency service, and quoted work, • Monitor job progress and adjust schedules in real-time, • Ensure all jobs are completed and documented accurately Sales & Revenue Growth • Actively promote and sell grease trap service agreements and maintenance programs, • Prepare and follow up on proposals and quoted work, • Identify opportunities to expand services within existing accounts, • Build strong relationships with clients to increase retention and repeat business, • Work with management to drive division growth and meet revenue targets Customer Service • Serve as a primary point of contact for customers, • Handle service requests, scheduling, and issue resolution professionally, • Maintain consistent communication and follow-up with clients, • Ensure a high level of customer satisfaction Administrative Accuracy & Payroll Coordination • Review and verify technician timesheets and job submissions daily, • Ensure all labor hours, job details, and service tickets are accurate and complete, • Submit accurate payroll information in a timely manner, • Maintain organized and up-to-date service records and documentation, • Assist with job costing and invoicing accuracy Team Coordination • Work closely with field technicians to ensure:, • Productivity and efficiency, • Quality of service, • Safety compliance, • Support training and performance improvement efforts Qualifications • 2–5+ years experience in dispatching, operations, or service coordination, • (plumbing, sewer & drain cleaning, environmental, construction or related service industries preferred), • Strong sales mindset with ability to grow accounts and close service work, • Excellent organizational skills and attention to detail, • Proven ability to manage multiple tasks in a fast-paced environment, • Strong communication and customer service skills, • Proficient with computers, scheduling systems, and basic office software, • Ability to ensure high accuracy in timesheets, job reporting, and payroll submissions Requirements, • Clean driving record, • Ability to pass background check and drug screening, • Reliable, accountable, and detail-oriented Schedule • Monday – Friday, • Full-time, in-person Why This Role? • Key position with direct impact on operations and revenue, • Opportunity to grow within a stable, expanding company, • Blend of operations, sales, and leadership responsibilities If you are a detail-oriented, sales-driven professional who takes pride in accuracy, organization, and driving results, we want to hear from you. We look forward to reviewing your application. Learn more about us: PublicSewerService.com Company DescriptionWith over 50 years in business, we’re New Jersey’s most trusted name in commercial sewer cleaning and underground repairs—backed by a heavy fleet and experienced teams.With over 50 years in business, we’re New Jersey’s most trusted name in commercial sewer cleaning and underground repairs—backed by a heavy fleet and experienced teams.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Makes calculations, using engineering formulas and skills · Instructs drafters how to reduce designs into completed drawings · Conducts routine geotechnical engineering laboratory checks · Leads concrete and rebar inspection testing · Performs research and writes reports · Prepares samples of unapproved materials for laboratory testing · Uses computer to run standard programs to solve engineering problems · Performs routine laboratory tests to determine various design parameters · Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements · Develops and maintains a schedule and budget for the assigned engineering project · Provides reports on the status of project milestones and adjusts schedules accordingly · Controls expenditures within limitations of project budget · Identifies project staffing requirements and coordinates staffing with supporting organization managers · Coordinates preparation and delivery of project deliverables, design documents, and bid packages · Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications · Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems · Prepares interim and completion project reports · Provides status and progress reports to customer, project team, and management · Classifies soils according to standard types · Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings · Prepares geologic reports and maps, interprets research data, and recommends further study or action · Conducts or participates in environmental studies and prepares environmental reports · Directs drilling of exploratory borings and wells · Oversees installation of monitoring wells in accordance with state and federal requirements · Collects or supervises collection of soil and groundwater samples for analysis of chemical composition · Determines direction of groundwater flow based on review of historical records and site specific data · Determines the nature and extent of contamination in soil and groundwater at environmental sites · Participates in decision making regarding research priorities and provides information on feasibility of prospective projects Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience Bachelor’s degree in Civil Engineering (or applicable Engineering Degree) with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred. Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification Registered Professional Engineer (PE) preferred or have the ability to become licensed within 6 months of being in this position ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $55,000–$80,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Plans, coordinates, and institutes functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into the Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Solves complex problems and calculations, using engineering formulas and skills, • Evaluates research by others and writes reports, • Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project, • Assists the Project Engineer in scheduling staffing requirements for field projects, • Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Participates in the integration of technical activities, • Evaluates and presents changes for design, specifications, drawing releases, reports, etc to the Project Engineer and /or Project manager for approval, • Prepares interim and completion project reports, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Performs site inspection to monitor progress/conformance to specs and procedures, • Designs portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • Plans schedule of research according to company’s or contracting organization’s timetable and establishes daily or weekly routines necessary to meet project timetable, • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Supervises field work and performs field work when needed, • Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel, • Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority, • Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget, • Supervises and delegates assignments to staff, • Oversees staff’s daily activities to ensure it is correct and complete, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with project personnel to provide technical advice and to resolve problems, • Coordinates project activities with activities of government regulatory or other governmental agencies, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in civil engineering with a minimum of 3-5 years of field or related experience where a PE license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred., • Professional Engineer (PE) license is preferred or have the ability to become licensed within 2 years of being in this position., • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE) preferred or have the ability to become licensed within 2 years of being in this position., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% up to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $90,000–$120,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Snipebridge, a strategic talent solutions company specializing in connecting exceptional talent to great career opportunities in the Architecture & Planning industry, is seeking a Supervising Engineer -Water Resources. Our client is an ENR Top 500 Design firm focused on geotechnical, environmental, water, ecological, and construction management services that has been delivering exceptional services for more than six decades. Their multidisciplinary team tackles intricate projects in diverse industries such as transportation, energy, infrastructure, and development. The firms long-standing commitment to technical excellence and client satisfaction has fueled their growth and success. They offer a collaborative and dynamic work environment where talented individuals can thrive and contribute to impactful projects. Position Summary This key position demands strong client-facing skills alongside the ability to lead and mentor staff-level engineers. A critical aspect of the role involves partnering with the firms dams/levees/water resources Practice Leaders to actively develop and expand our market footprint within New Jersey, New York, and Pennsylvania. Primary Responsibilities: • Supervising and scheduling geotechnical and structural engineering staff and providing technical direction and oversight., • Senior project management of interdisciplinary teams of geotechnical, structural, hydrologic/hydraulic, and civil engineers; to include, scheduling and supervising project meetings, producing and managing project schedules and budgets., • Managing and reviewing the preparation of construction plans and technical specifications., • Supervising and reviewing dam and/or levee safety inspections., • Providing leadership/mentoring to technical staff., • Managing and tracking budgets, creating project invoicing and Client follow-up, • Communicating effectively and efficiently with team members, clients and contractors., • Interacting with clients and regulatory agencies., • Preparing technical and cost proposals., • Supervising fieldwork including test borings and instrumentation installations and construction monitoring for dam and levee rehabilitation projects., • Providing data analysis, organization, and interpretation in support of dam/levee inspections, evaluations, and rehabilitations projects., • Executing and/or supervising engineering analyses including seepage and slope stability analyses of embankment dams and levees, drainage and filter designs, gravity dam stability analyses., • Writing and/or reviewing field reports, inspection/engineering reports, and permit applications. Education/Skills/Experience: • B.S. in Civil Engineering or related field of practice is required. Master’s Degree with a Geotechnical focus is a plus., • Professional Engineer license in NJ with the ability to obtain PE in NY and PA., • 15 to 20 years of experience in civil – geotechnical engineering, with direct involvement in dam safety inspections, condition assessments, subsurface exploration programs, engineering analyses, dam rehabilitation design, and regulatory permitting., • Experience completing projects with public sector/municipal agencies in New Jersey, New York and Pennsylvania is highly preferred., • Proven experience with design and development of engineering technical specifications, cost estimating and other related bidding documents., • Strong interpersonal skills and ability to speak publicly., • Solid project financial management skills; knowledge of production support systems and personal computer proficiency are all required competencies., • Experience in providing technical and project leadership to staff-level or junior engineers., • A strong background using various geotechnical computer software such as SEEP/W, SLOPE/W, and finite element analysis software such as PLAXIS are preferred., • Knowledgeable of dam and levee safety guidelines utilized by the U.S. Army Corps of Engineers, Bureau of Reclamation, Federal Energy Regulatory Commission, Natural Resource Conservation Service, and other Federal agencies, as well as State Dam Safety agencies. All applicants must be legally authorized to work in the United States without sponsorship and must already possess long-term work authorization.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Inspects and oversees construction of buildings, dams, utilities, walls, pavement, and other types of construction work to ensure that procedures and materials comply with plans and specifications by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Conducts pile inspections, inspections of deep dynamic compaction process, • Observes compacted fills (including use of nuclear density gauges), • Observes utility installation, concrete testing and rebar inspection, • Measures distances to verify accuracy of dimensions of structural installations and layouts, • Performs inspections of deep dynamic compaction process, • Verifies levels, alignment, and elevation of installations, • Observes work in progress to ensure that procedures are followed and materials used conform to specifications, • Prepares samples of materials for laboratory testing and performs the tests, • Examines workmanship of finished installations for conformity to standard and approves installation, • Interprets blueprints and specifications for Contractor and discusses deviations from specified construction procedures to ensure compliance with regulations governing construction, • Records quantities of materials received or used during specified periods, • Maintains daily logs of construction and inspection activities and completes daily progress reports, • Prepares sketches of construction installations, • Participates in environmental audits and prepare data summaries, data tables, data mapping and presentation, and preparation of environmental reports, • Follows blueprints, guidelines, and/or diagrams, • Responsible for the operation and maintenance of equipment, • Assists environmental engineers in the development of remediation devices, • Classifies soils according to standard types, • Examines rocks, minerals, and fossil remains to identify and determine sequence of processes affecting development of earth, • Applies knowledge of chemistry, physics, biology, and mathematics to explain these phenomena and to help locate mineral, geothermal, and petroleum deposits and underground water resources, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Performs environmental soil sampling, • Prepares summary and certification letters and reports, • Conducts pile and deep foundation inspections, • Inspects ground improvement, • Observes borings, test pits, geoprobes and cone penetrometer tests, • Conducts permeability testing and well monitoring, • Prepares project cost estimates, proposals, reports and mentors junior staff, • Works under general supervision with latitude for independent judgment, • Displays moderate skills with high level of proficiency, • Adheres to environmental, construction and OSHA safety policies and procedures to be in compliance with local, state, and federal environmental regulations, • Consults with senior peers on certain projects, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience Preferred Bachelor's degree from four-year college or university; or one to four years related experience and/or training with HS Diploma or GED; or equivalent combination of education and experience. Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting Approximately 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $50,000–$70,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Job Overview: The Residential Aide reports to the House Manager. He/she is responsible for the monitoring of the residents, works closely with the supervisor, and communicates all activities of the house. Duties 1. Embodies Eva’s Village’s core values, voice, and tone in order to provide an exceptional and effective experience for our clients, funders, employees and volunteers, 2. Must be completely familiar with all rules of the program., 3. Maintains the sign-in/sign-out sheets., 4. Maintains activities log with NA/AA meetings, van, etc., 5. Maintains the communication book., 6. Responsible for answering the phone, relaying calls, and taking messages., 7. Responsible for mail distribution., 8. Inspects and makes sure that all work details assigned to the residents are completed., 9. Responsible for the security of the program. This includes following the visitor protocol and observing the camera., 10. Monitors and documents client behavior., 11. Must be flexible., 12. Responsible for all incidents concerning resident problems being reported promptly., 13. Promptly reports to the House Manager any problems concerning the van, maintenance, supplies or any household problems., 14. Interface with residents, referring their problems to the proper person resulting in the resident getting the assistance they need., 15. Attends mandatory monthly in-service and staff meetings., 16. Responsible for urine testing/breathalyzers and recording of tests and results., 17. Monitors and documents resident medication., 18. Reports all repairs and wear & tear to House Manager., 19. Responsible for weekly inspection of rooms., 20. Must be completely familiar with policy and procedures of the program., 21. Must be able to perform intake and orientation to the program for new clients., 22. Must be willing to learn client-oriented system of care. This includes the Client Centered Approach as well as the Trauma Informed Care Approach., 23. Serves as a liaison between the residents and House Managers., 24. Oversees periodic special work details., 25. Facilitates didactic/educational groups as assigned., 26. Serves as a role model., 27. Performs crisis intervention when necessary., 28. Responsible for the arrangement of transportation of residents to meetings, hospitals, etc. and if need be, may be asked to drive., 29. Must perform tasks delegated by the immediate supervisor within the scope of the policy and procedures manual. Qualifications EDUCATION: High School Diploma or GED equivalent Bachelor’s or Associates degree preferred Valid driver’s license If in recovery, a minimum of two years clean EXPERIENCE: Thorough knowledge of 12-Step program, AA, NA, and the biopsychosocial model of substance abuse/dependence Ability to speak, read, and write English Must be able to work independently and complete assignments with minimal supervision Good interpersonal skills are required Must maintain a professional demeanor and perform duties effectively in stressful/emergency situations Must be able to maintain objectivity and deal diplomatically with clients and family members. Must have at least one year experience in the field The actual compensation will be determined based on experience, education and qualifications.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

PrideStaff - - Responsibilities: Maintain, troubleshoot, and repair rotary machinery including motors, pumps, and high-speed mixers; Ensure the integrity and safety of chemical processing equipment, including reactors and fluid handling systems; Perform specialized maintenance on precision equipmen

Maintains logs, performs rounds, and completes maintenance work orders, tests, and inspections.

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen