Trabajos field inspection en Deer Park, New YorkCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

The Quality Control (QC) Inspector perform in-process, final inspection and test of completed components and subassemblies and to fabricate test fixtures and prototypes as necessary. Component level electronics experience required. ESSENTIAL DUTIES AND RESPONSIBILITES: • Perform receiving, in-process and final inspection on parts, sub-assemblies, and assemblies, and complete required documentation., • Perform incoming inspection on material and components., • Read and interpret electronic schematics, diagrams, and bills of material., • Perform visual, mechanical and electrical inspections on products., • Knowledge of component level electronics, • Experience using Oscilloscopes, Multimeters, Power Supplies, Test Fixtures and Signal Generators., • Inspect for manufacturing or non-manufacturing defects with regard to material returned from the field., • Trouble shoot nonconforming products to component level., • Complete check lists, tags and data sheets as necessary to accurately maintain records of tests performed., • Maintain inspection history card and non-conformance report files., • The ability to solder to acceptable workmanship standards., • The ability to wire and generate prototype hardware., • Perform periodic calibration of test equipment and maintain detailed records of calibration. EXPERIENCE/REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skillset, and/or ability required. • One year certificate from college or technical school; or a minimum of five years related experience and/or training, in a manufacturing environment. #CareForTomorrow At AMETEK STC we believe in building a sustainable future for our customers, colleagues, suppliers, and the communities in which we operate. We take an active role in promoting real change, by contributing to a healthy, fair, and sustainable society in many of the countries our facilities are located. We call it #CareForTomorrow! Compensation Employee Type: Hourly Salary Minimum: $45,000 Salary Maximum: $60,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York CIty

Quality Assurance Manager – Precision Gear & Machine Shop \n We are a highly regarded, AS9100-certified precision gear and machine shop specializing in the production of high-tolerance gears, components, and assemblies for aerospace\nand commercial applications. With a strong reputation for quality, precision, and on-time delivery, we serve top-tier customers in demanding industries where zero defects is the standard. \n We are seeking an experienced Quality Assurance Manager to lead our quality function and drive continuous improvement in a fast-paced, hands-on manufacturing environment. \n Key Responsibilities: \n\n • Oversee the development, implementation, and maintenance of our AS9100-certified Quality Management System (QMS), ensuring full compliance with aerospace standards, customer requirements, and regulatory mandates.\n, • Lead internal audits, manage external certification audits, and drive corrective/preventive actions (CAPA) to maintain and improve certification status.\n, • Supervise and mentor a team of quality inspectors, and technicians; provide training and performance management to foster a culture of quality excellence.\n, • Develop and implement quality control processes, inspection plans, and testing protocols for precision gears and machined components.\n, • Manage supplier quality assurance, including approval, monitoring, and performance evaluation.\n, • Analyze quality data, identify trends, and lead root cause analysis and continuous improvement initiatives (e.g., Lean, Six Sigma, PDCA).\n, • Serve as the primary point of contact for customer quality issues, audits, and concerns; ensure timely resolution and strong customer relationships.\n, • Collaborate closely with production, engineering, and leadership to integrate quality into every stage of the manufacturing process.\n, • Ensure accurate documentation, traceability, and reporting in line with aerospace requirements.\n, • Bachelor's degree in Engineering, Quality Management, or a related field (or equivalent experience).\n, • Minimum 8-10 years of progressive quality experience in aerospace manufacturing, with at least 5 years in a leadership role.\n, • Proven expertise in AS9100 (Rev D preferred) implementation, maintenance, and auditing; experience with NADCAP\n processes a strong plus.\n, • Strong knowledge of precision machining, gear manufacturing, GD&T, metrology, and inspection methods (CMM, optical comparators, etc.).\n, • Demonstrated success leading teams in a high-precision, low-volume production environment.\n, • Excellent problem-solving skills with experience in root cause analysis tools (8D, 5-Why, Fishbone).\n, • Proficient in quality software/tools (e.g., ERP, SPC, document control systems).\n, • Strong communication and leadership abilities; ability to thrive in a collaborative, team-oriented culture.\n, • Competitive salary commensurate with experience\n, • Comprehensive benefits package (health, 401(k) with match, paid time off)\n, • Opportunities for professional growth in a stable, growing company\n, • State-of-the-art facility with cutting-edge equipment\n

Job DescriptionAltus is a full-service fire and life safety services platform. We offer a complete suite of solutions, from the design, engineering, installation, and servicing of state-of-the-art fire and life safety systems to training, consulting, crisis management and business continuity services. Superior Pump & Motor, an Altus Fire & Life Safety Company, is looking for a Junior Pump Mechanic to join our team! We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our team members. Salary Range: $20.00/hr - $30.00/hrResponsibilities • Assist senior technicians with the installation, inspection, maintenance, and repair of pump systems and related equipment, • Perform basic mechanical and electrical troubleshooting under supervision, • •Support service calls, preventative maintenance, and emergency response work, • Maintain accurate service documentation and reports, • Follow all safety procedures and company standards, • Travel to job sites as requiredRequired Skills, • Mechanical or electrical experience in a related field (HVAC, electrical, industrial maintenance, automotive, controls, or similar), • Strong mechanical aptitude and problem-solving skills, • Ability to work with hand and power tools, • Willingness to learn pump systems, motors, and controls, • Valid driver’s license with a clean driving record, • Ability to lift equipment and work in industrial and field environments, • Preferred (Not Required):, • Trade school or technical training, • Experience with motors, controls, or troubleshooting electrical systems, • Basic understanding of piping systems

Job DescriptionLead Fleet Mechanic Automotive and Machinery Location: Hempstead, NY (In-person, on-site at main facility; field work as needed across Long Island and NYC service areas) Employment Type: Full-Time, Non-Exempt (Hourly) Schedule: 40 hours per week standard (typically Monday through Friday, shop hours); overtime at time-and-a-half as needed for peak seasons, emergencies, or high demand Compensation: $35 to $45 per hour (based on experience, certifications, and skills) Join a stable, family-owned business with more than 65 years of trusted service in the irrigation and landscaping industry. With a fleet of about 80 vehicles and pieces of equipment (service trucks, light-duty vehicles, trailers, small engines, skid steers, loaders, pumps, and irrigation machinery), you will keep operations running smoothly for a team of 90 to 95 people. This hands-on lead position includes preventive maintenance, diagnostics, repairs, and the opportunity to perform in-house New York State vehicle inspections once the facility becomes a licensed inspection station. Key Responsibilities • Perform preventive maintenance, diagnostics, and repairs on a mixed fleet of gasoline and diesel trucks, vans, trailers, small engines, and landscaping/construction machinery., • Troubleshoot and fix mechanical, electrical, hydraulic, and drivetrain problems in both shop and field settings (including job-site repairs during busy seasons)., • Conduct independent diagnostics using scan tools, multimeters, pressure gauges, and OEM software., • Handle major repairs such as engine rebuilds, transmission work, hydraulic overhauls, and component replacements when required., • Prioritize and manage multiple breakdowns efficiently in a fast-paced, high-volume environment., • Keep accurate repair records, track parts inventory, and document work for compliance and efficiency., • Perform (or prepare to perform) New York State annual safety and emissions inspections on company vehicles once the facility is licensed as an inspection station., • Work independently with minimal supervision while coordinating with operations teams., • Maintain strict safety standards and company protocols on every job., • Be available for overtime, emergency field repairs, and peak-season demands.Required Qualifications, • 5 or more years (10 or more years preferred) of hands-on experience as an automotive, fleet, or machinery mechanic., • Proven expertise with gasoline and diesel engines, hydraulic systems, electrical diagnostics (including CAN bus where applicable), and drivetrain repairs., • Valid New York State driver's license (clean record preferred)., • New York State Certified Motor Vehicle Inspector (Group 1/Safety Inspector) certification required (or ability and willingness to obtain promptly; company supports the process to become a licensed private fleet inspection station for internal efficiency)., • Strong problem-solving and diagnostic skills (real troubleshooting, not just parts swapping)., • Physical ability to lift heavy objects, work in varying outdoor conditions, and perform field repairs., • Reliable, punctual, safety-conscious, and organized with good communication skills for clear reporting.Preferred Qualifications, • Experience with heavy equipment, construction machinery, skid steers/loaders, small engines, trucks/light vehicles, or irrigation-related equipment., • ASE certifications, CDL, welding/fabrication skills, or major component rebuild experience., • Familiarity with fleet maintenance in service industries (landscaping, irrigation, construction)., • Comfort working on both vehicles and specialized machinery.What We Offer, • Hourly pay of $35 to $45 based on experience, certifications, and skills., • Overtime at time-and-a-half during peak seasons, emergencies, or busy periods., • Employer-sponsored health insurance (partial contribution), dental (employee-paid), 401(k) with partial match, paid time off, and potential tool allowances or other perks., • Stable, year-round work in a long-standing family-owned business with a strong reputation., • Opportunity to grow into a lead role in a supportive, collaborative environment.If you have the technical skills, leadership mindset, and drive to keep a large fleet and field teams moving reliably, apply today. This is a chance to make a direct impact in a respected, growing operation.

Entry Level Sales Representative: Job Summary: Are you financially happy in your current role? Does your current position have opportunities for growth and a rewarding career? If you need to make more money and have a pathway to career advancement, then Leaf Home is just the opportunity you’ve been looking for! Target earnings of $50,000 to $100,000+ As a Leaf Home Entry Level Sales Representative, you will work to provide potential customers with your expertise and education about the benefits of LeafFilter gutter protection and gutter replacement. By doing a quick home inspection from the street we will teach you how to identify potential homeowner challenges that Leaf Home has the solution for. Primary Responsibilities: • Generate sales leads for our outside sales team by covering an assigned territory each day, going door to door and engaging prospective customers at their home about Leaf Home products (local travel required)., • Utilize a consultative selling approach to educate consumers on the benefits of Leaf Home and gather information for the sales team to reach out and schedule an in-person product demonstration., • Report daily results to the field management team and develop a collaborative working relationship with other sales representatives., • Ensure a high quality and accurate representation of Leaf Home products by representing the company professionally and ensuring that potential customers have an exceptional experience. Experience and Minimum Qualifications: • High school diploma or equivalent., • Valid Driver’s license, a reliable personal vehicle., • Ability to work evenings and weekends., • Excellent verbal and written communication skills at all levels to communicate with internal and external stakeholders articulately., • Highly motivated to sell with a self-driven desire to meet and exceed goals., • Customer focused and results oriented., • Professional demeanor and attire., • Must be legally authorized to work in the country of employment without sponsorship for employment visa status (e.g., H1B status). Physical Demands: • While performing the duties of this job, the employee must be able to work outdoors daily with exposure to the elements including inclement weather. Extended periods of walking / standing required., • Field office/manufacturing/construction environment., • Sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Compensation package and benefits: • Industry-best compensation package with unlimited earning potential, • Paid training, • 401k with company match, • Mileage reimbursement, • Branded apparel, • Independent work, • Individualized career development programs, • Referral Program, • Mentorship program Travel Requirements: • Local travel required. Overtime/Additional Hours Requirements: • May be requested to work overtime on evenings and weekends dependent on business need. Diversity and Inclusion Statement: Leaf Home is committed to creating a diverse environment and is proud to be an equal opportunity employer. We strive to create an environment that embraces differences and fosters inclusion. Equal Opportunity Statement: Leaf Home will recruit, hire, train, and promote persons in all job titles without regard to race, color, ancestry, national origin, gender identity or expression, sexual orientation, marital status, religion, age, results of genetic testing, veteran status, or physical/mental disability (except where the disability prevents the individual from being able to perform the essential functions of the job and cannot be reasonably accommodated in full compliance with the law).

Job DescriptionDescription: About GenServe: GenServe is the nation’s leading independent provider of scheduled and emergency power generator maintenance, repair, and sales, primarily serving commercial customers. Established in 1990, GenServe has the largest team of EGSA-certified technicians in the Northeast and a growing presence across the U.S. Through a combination of organic growth and strategic acquisitions, GenServe is rapidly expanding its national footprint as a one-stop shop for generator solutions. Job Summary GenServe is looking for a skilled and experienced Generator Technician to join our field service team. In this role, you will independently perform scheduled maintenance, diagnostics, load banks, and repairs on a wide range of standby generator systems. You’ll work with diesel, natural gas, and propane-powered generators for commercial, industrial, and municipal clients. This position is ideal for technicians with a solid foundation in power generation and a desire to continue growing their technical and leadership skills. Key Responsibilities • Perform preventative maintenance and repair services on standby generator systems., • Independently diagnose mechanical and electrical faults using appropriate tools and technical documentation., • Troubleshoot engine and generator system components include batteries, starters, alternators, fuel systems, and control panels., • Complete load bank testing and inspections to ensure generator performance., • Maintain accurate service records, inspection reports, and parts usage documentation using company systems., • Some exposure to ATS (Automatic Transfer Switches) with supervision., • Ensure all work complies with GenServe safety standards and customer site protocols., • Provide support and guidance to Gen Tech 1’s as needed., • Attend internal and external training as needed to further your knowledge and experience., • High school diploma or GED required., • Technical training or certifications in diesel engines, generator systems, or electrical systems preferred., • Minimum of 2 years’ hands-on experience servicing commercial or industrial generator systems., • Valid driver’s license with a clean driving record., • Physically able to lift 50+ lbs and work in field/outdoor conditions., • Proficiency in using diagnostic tools, multimeters, and load banks., • Must perform all duties and responsibilities of a Level 1 Technician., • Strong mechanical and electrical troubleshooting skills., • Excellent customer service and communication abilities., • Ability to read and interpret wiring diagrams, schematics, and service manuals., • Self-motivated with strong problem-solving and organizational skills. Generator Technician at GenServe are on a clear path toward becoming a Generator Technician Level 5. GenServe supports advancement through paid training, OEM certifications, and OJT. Why GenServe? • Competitive compensation and benefits, • Consistent year-round work, • Industry-leading safety and technical training, • Advancement opportunities in a growing company, • Supportive, team-oriented work culture, • Technician Appreciation Days

Job Description Savin Engineers is seeking a detail-oriented Construction Estimator to join our team and support the planning and delivery of construction projects. The ideal candidate will be responsible for preparing accurate cost estimates throughout all phases of a project and assisting the project team in maintaining cost control from concept through construction. Position Responsibilities • Prepare and compile detailed construction cost estimates for proposed construction projects., • Revise and update cost estimates at each phase of the project, including conceptual design, schematic design, design development, and construction documents., • Perform detailed quantity take-offs from construction drawings and specifications., • Review contract documents and compile a list of clarifications, conflicts, and apparent omissions., • Develop Schedules of Values and unit cost items for project budgeting and tracking., • Prepare change order cost estimates during construction., • Review and evaluate contractor payment requisitions against the approved Schedule of Values and notify the Architect or project team of any discrepancies or concerns., • Support project teams with cost analysis and budget monitoring throughout the life of the project. Qualifications • Bachelor’s degree in Construction Management, Engineering, Architecture, or related field (preferred)., • 3–8 years of estimating experience in construction or construction management., • Strong knowledge of construction drawings, specifications, and cost estimating practices., • Experience preparing quantity take-offs and cost analysis., • Strong analytical, organizational, and communication skills., • Proficiency in **Excel andCompany DescriptionSavin Engineers, P.C. is a well-established, mid-size engineering firm headquartered in Westchester County, NY with offices in Pleasantville, NY, Rochester, NY, Bridgewater, NJ and Washington DC. Savin Engineers is always looking for talented and motivated individuals to join our team. We are a growing and vibrant multi-disciplined engineering consulting firm with six divisions united under one roof. Our MEP Division (high performance, low energy solutions) is reinforced by our Transportation Division (roads, tunnels, bridges, railways and airports), our Structural Division (structural solutions and structures of dependable performance); our Environmental Division (systems to safeguard our water), our Field Services Division (technology to detect subterranean system failures), and our Educational (turnkey assistance from concept to close out) and Facilities Management (infrastructure and building operation analysis) Division. We offer exciting opportunities to build careers in any of our multiple office locations. Whether it’s planning, design, field inspection or construction administration – any area of the company you may be involved in is staffed with a diverse group of highly-educated, qualified mentors working on a wide range of interesting assignments. We offer a competitive benefit and compensation package. Savin Engineers is an Equal Opportunity EmployerSavin Engineers, P.C. is a well-established, mid-size engineering firm headquartered in Westchester County, NY with offices in Pleasantville, NY, Rochester, NY, Bridgewater, NJ and Washington DC. Savin Engineers is always looking for talented and motivated individuals to join our team. We are a growing and vibrant multi-disciplined engineering consulting firm with six divisions united under one roof. Our MEP Division (high performance, low energy solutions) is reinforced by our Transportation Division (roads, tunnels, bridges, railways and airports), our Structural Division (structural solutions and structures of dependable performance); our Environmental Division (systems to safeguard our water), our Field Services Division (technology to detect subterranean system failures), and our Educational (turnkey assistance from concept to close out) and Facilities Management (infrastructure and building operation analysis) Division. We offer exciting opportunities to build careers in any of our multiple office locations. Whether it’s planning, design, field inspection or construction administration – any area of the company you may be involved in is staffed with a diverse group of highly-educated, qualified mentors working on a wide range of interesting assignments.\r\n\r\nWe offer a competitive benefit and compensation package. \r\nSavin Engineers is an Equal Opportunity Employer

Job DescriptionDescription: JOB TITLE: Machinist/Programmer Job Summary: We are seeking a skilled Machinist/Programmer to join our team. The ideal candidate will have experience operating and programming CNC machines to produce precision parts. You will be responsible for reading blueprints, setting up machines, programming CNC controls and inspecting parts to ensure they meet specifications. Perform the activities of an expert level CNC programmer and shop leader to machine, program, estimate, and coordinate various products per established facility processes, including set-up, fabrication, and inspection using the operations of CNC mills, lathes, and other equipment. Perform as a key contributor for the new knowledge of programs and projects. Apply knowledge of policies, procedures, and the practical application of general and specific technical aspects of the job to complete varied and complex work. Make recommendations for new procedures. Work independently in established procedures and practices. Lead tasks and mentor others. Due to the nature of work performed within this facility, U.S. citizenship is required. Key Responsibilities: · Program set up, and operate CNC machines (lathes, mills, or grinders) to produce parts according to specifications. · Interpret blueprints, engineering drawings, and CAD models to develop and modify CNC programs. · Select and install appropriate tools, fixtures, and materials for each job. · Perform machine maintenance and troubleshooting to ensure optimal performance. · Inspect finished parts using precision measuring instruments to verify conformance to specifications. · Collaborate with engineering and production teams to optimize machining processes and improve efficiency. · Maintain a clean and safe work environment, adhering to company safety policies and procedures. · Continuously monitor machine operations to detect malfunctions or deviations from specifications. Required Qualifications: · High school diploma or equivalent; technical degree or certification in machining, CNC programming, or a related field is preferred. · Proven experience as a Machinist/Programmer, with a strong background in CNC programming and machine operation. · Proficiency in reading and interpreting blueprints, technical drawings, and CAD models. · Experience with various CNC controls (e.g., Fanuc, Haas, Siemens). · Strong knowledge of machining principles, materials, and cutting tools. · Excellent problem-solving skills and attention to detail. · Ability to work independently and as part of a team in a fast-paced environment. · Good communication skills and a commitment to quality and safety. · Ability to lift and carry up to 30lbs. · Comfortable working in a manufacturing environment with exposure to noise, dust and other industrial elements. · 10 years of experience with programming in computer-aided manufacturing (CAM) software and machining and fabrication principles · 10 years of experience with CNC and manual machinery operations · 5 years of experience with using Mastercam and programing and executing 4th and 5th axis machining operations · 3+ years of experience with estimating CNC machining work and jobs · Ability to review engineering drawings for completeness and interpret geometric dimensioning and tolerancing (GD&T) · Ability to inspect and verify all products by using standard inspection equipment and techniques/CMM (Coordinate Measuring Machine) · Ability to set up and operate manual machine shop equipment, including lathes, milling machines, saws, and power tools · Ability to pay strict attention to detail in a manufacturing environment Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate has minimum of 4-8 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities include, but are not limited to: • Manage projects, staff and clients., • Work with multi-disciplinary teams on tasks such as work zone traffic, intersection design, traffic signal design, roadway signing and pavement marking plans, DOT access permitting, control plans and traffic signal operations analysis., • Assist in the preparation specifications, plans, construction schedules, impact studies, permits, and designs for projects., • Assist with traffic/parking studies, corridor planning, feasibility studies, and safety audits., • Bachelor’s Degree in Civil Engineering, • Professional Engineering (PE) license in NY required (or ability to obtain within first 6 months), • Professional Traffic Operations Engineer (PTOE) desirable, • Excellent oral and written communication skills, • Experience with design standards, NYSDOT/NYCDOT/CTDOT/NJDOT experience (desirable), • Knowledge of CADD Software (MicroStation or AutoCAD), • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for, for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public and are dedicated to Moving Forward Together.

Job DescriptionDescription: Director of Quality Cox & Company, Inc. is seeking an outgoing and experienced Director of Quality to lead the development and implementation of our quality management system. This key senior role is vital in ensuring that our products and services consistently meet company standards, regulatory requirements, and customer expectations. The successful candidate will oversee quality teams and collaborate across departments to establish and maintain a culture of quality and compliance throughout the organization. Key Responsibilities • Develop, implement, and maintain the company’s quality management system in accordance with industry standards and regulatory requirements., • Lead and oversee quality assurance teams, providing guidance, training, and performance evaluations., • Collaborate with cross-functional departments such as production, engineering, and customer service to ensure quality and compliance are integrated into all processes., • Conduct audits, inspections, and reviews to identify areas for improvement and ensure adherence to quality standards., • Analyze quality data and metrics to identify trends, root causes, and implement corrective and preventive actions., • Stay current with industry regulations and standards, ensuring the company’s quality practices remain compliant., • Foster a culture of continuous improvement and quality awareness across the organization. Skills and Qualifications • Strong knowledge of quality standards and regulatory requirements relevant to the industry., • Excellent leadership, communication, and interpersonal skills., • Ability to analyze data, identify issues, and implement effective solutions., • Experience with quality management systems, audits, and process improvement methodologies., • Strong organizational skills and attention to detail. At Cox & Company, Inc., we value innovation, integrity, and teamwork. We offer a dynamic work environment with opportunities for professional growth and development. Join us in our commitment to delivering high-quality products and services that meet the highest standards of excellence. Requirements: Role and Responsibilities • Direct a staff of up to 25 people including engineers, technicians, inspectors, engineers and administrative personnel. Hire staff and provide training., • Develop and enforce quality systems to ensure compliance to consensus standards and customer requirements., • Monitor and communicate measurement of quality-related metrics to senior staff and advocate for improvements., • Communicate with customers regarding Quality compliance, complaints, audits, etc., • Collaborate with Purchasing on monitoring and improving vendor performance., • Drive continuous improvement initiatives to reduce waste, improve efficiency and drive a quality culture., • Education – Bachelor’s degree in a technical or management related field., • 10 years minimum experience in a direct QA role with progressive advancement into supervisory and managerial roles., • Ability to follow detailed written and verbal instructions in English., • Ability to work with minimal supervision in a high paced development environment., • Ability to direct and manage a department of up to 25 employees., • Knowledge of manufacturing and inspection processes and data systems., • Ability to interact at all levels of the organization, with customers and regulatory bodies in writing, verbally and in person, • Ability to type documents from drafts and markups., • Competitive salary, • Health, dental, and vision insurance, • 401(k) with company match

Job Description Job Summary We are seeking a dedicated and detail-oriented Environmental Scientist to join our team. The ideal candidate will be responsible for conducting scientific research, collecting and analyzing environmental data, and supporting project development through technical expertise. This role offers an exciting opportunity to contribute to environmental conservation and sustainable practices, utilizing advanced GIS tools, laboratory techniques, and data analysis skills. The position is full-time and involves collaboration across various environmental projects, ensuring compliance with regulations and promoting ecological health. Duties • Performs routine and complex field inspections and studies of sites proposed for investigation including topography, sensitive environmental receptors and exposed geological formations that may have a bearing on the proposed investigation., • Provides technical supervision on the collection and interpretation of field data., • Coordinates the full time inspection of geotechnical and hydrogeological site investigations including the supervision of technicians, Environmental Scientist I, drill crews, tank removals and/or the study of pertinent geological data and applicable surface formations., • Performs geological literature searches and routine and complex analyses. Evaluate the impact on geological formations involved in the excavation of tanks and subsurface investigations., • Evaluates both routine and complex laboratory and boring data and samples, generates geologic profile rock profiles and prepares data for the inclusion in reports., • Composes routine and complex hydrogeological reports based on approved workplans including any required recommendations on some routine projects for the approval of a senior scientist, • Prepares proposals on routine and complex projects., • Supervises the development of the scope of subsurface investigations, geological assessments and other special field or laboratory tests. Assesses the physical and chemical properties of soil and rock formations and other pertinent hydrogeologic conditions., • Oversees and implements remedial pilot testing, • Education – Bachelor’s degree in Environmental Engineering, Geology, Environmental Science, or related discipline., • Experience - 3+ years in environmental science within consulting or remediation., • Proficiency - Competent in Microsoft Office, Adobe Acrobat, and ability to work with computerized database searches., • Technical Knowledge – Proficiency in environmental site assessments, remediation technologies, Phase I/II ESAs, hydrogeology, compliance auditing., • Certifications – OSHA 40-hour HAZWOPER (required), Asbestos/Lead/Mold Certifications, CPR certification, valid driver’s license.Company DescriptionTrusted since 2002, Metro Environmental Services (MES) is an industry-leading environmental and construction organization. We offer full-service solutions for clients who store, consume, or sell petroleum products from Delaware to Massachusetts. Our services include: Pump and Tank Construction | Environmental Remediation | General Construction | Fuel Facility Maintenance | Tank and Line Testing | Environmental Compliance and Engineering | Groundwater Sampling and Soil Boring We have many long-term employees; however, due to our success and growth, we are seeking candidates for many new opportunities. This is an exciting, thriving Company with a proven track record. Come join us!Trusted since 2002, Metro Environmental Services (MES) is an industry-leading environmental and construction organization. We offer full-service solutions for clients who store, consume, or sell petroleum products from Delaware to Massachusetts. Our services include:\r\n\r\nPump and Tank Construction | Environmental Remediation | General Construction | Fuel Facility Maintenance | Tank and Line Testing | Environmental Compliance and Engineering | Groundwater Sampling and Soil Boring\r\n\r\nWe have many long-term employees; however, due to our success and growth, we are seeking candidates for many new opportunities. This is an exciting, thriving Company with a proven track record. Come join us!

Job DescriptionDescription: Maxxima is an established LED lighting and electrical supply brand serving the consumer home and transportation markets. We are seeking a Product Sourcing Associate to support our ecommerce division, MaxximaStyle, as we continue expanding our portfolio of 500+ product SKUs. This role works closely with our Sourcing Manager to support sourcing, procurement, and product development, as well as vendor management and category management. The ideal candidate will help manage supplier relationships primarily with overseas manufacturers in China, while conducting market research and competitive analysis to support the continued growth of our product line. This is an excellent opportunity for a detail-oriented sourcing or procurement professional to work closely with our Sourcing Manager on key product sourcing initiatives. You’ll coordinate new product onboarding, support supplier performance evaluations, and collaborate with marketing and engineering on packaging, manuals, and other product content. Please note that this role requires full-time onsite attendance at our headquarters in Hauppauge, NY. Key Responsibilities: • Support product sourcing, product development, and procurement for new and existing products, including LED lighting, smart home, Wi-Fi technology, and electrical accessories, • Collaborate with current overseas manufacturing suppliers and help identify new global sourcing opportunities, primarily from China and other Asian markets, • Conduct market research and competitive analysis to identify emerging trends, new product opportunities, and potential supplier partnerships, • Support negotiations for pricing, payment terms, and delivery schedules to ensure quality and cost efficiency, • Coordinate the submission, inspection, and documentation of product samples, • Maintain detailed product specifications, sourcing records, and vendor information within internal databases, • Partner with cross-functional teams, including marketing, engineering, and quality assurance, to support new product launches and supplier communications, • Monitor supplier performance and assist in addressing any quality, production, or delivery issues, • Assist with purchase planning and scheduling to align with inventory and sales forecasts, • Associate’s degree required; Bachelor’s degree preferred in business, supply chain management, logistics, procurement, or related field, • 2–5 years of experience in product sourcing, procurement, or supply chain operations, • Basic understanding of sourcing, procurement, and supply chain processes, • Experience working with overseas suppliers or manufacturers, • Strong attention to detail with the ability to manage multiple priorities in a fast-paced environment with a sense of urgency, • Proven ability to analyze product data, identify sourcing opportunities, and solve problems independently and as part of a team, • Excellent communication and relationship-management skills, • Strong organizational and project coordination abilities, • Opportunity to directly influence the growth of an expanding ecommerce product line, • Exposure to global sourcing and supplier management, • Collaborative team environment with strong cross-departmental involvement, • Paid time off plus a paid volunteer day with one of our partner nonprofits, • 401(k) with company match and eligibility, • Generous benefits package with highly subsidized medical coverage and healthcare concierge services, • Company-paid life insurance and voluntary dental & vision coverage, • Access to our Employee Assistance Program (EAP), • Save on our products and enjoy exclusive team member perks, • Discounts to concerts, movies, and theater Maxxima is a division of Panor Corp. We are an equal opportunity employer. Panor Corp. provides equal employment opportunity to all employees and applicants without regard to actual or perceived race, creed, color, citizenship, sex, pregnancy, religion, national origin, military status, marital status, sexual orientation, gender expression or identity, genetic information (including genetic predisposition), age, disability, status as a victim of domestic violence, or any other group protected by applicable federal, state and local laws. This policy applies to all terms and conditions of employment including, but not limited to, recruitment, hiring, assignment of duties, benefits, promotion, discipline, harassment, training, compensation, leave of absence, layoff and termination. Requirements:

Job Description Join Imperial Cleaning as a Full-Time District Manager, a field based position within the New York Metro Area. This role presents an exciting opportunity to lead a team of dedicated professionals while driving customer satisfaction and operational excellence. You will be rewarded for your contributions to our vibrant, customer-focused culture. Your ability to think abundantly and solve problems will be pivotal in this high-performance environment, where your passion for delivering exceptional service will shine. We value integrity, empathy, and safety, ensuring that your efforts contribute to a supportive and engaging workplace. You will be offered great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Flexible Spending Account, Paid Time Off, Employee Discounts, Generous 401k match, and Aflac insurance plans. This is not just a job; it's a chance to impact your community and grow your career in a dynamic company dedicated to excellence in customer service. YOUR DAY AS A DISTRICT MANAGER As a new District Manager at Imperial Cleaning, your day-to-day expectations will involve overseeing multiple locations within the New York Metro Area. You will be responsible for managing teams, ensuring that customer service standards are consistently met or exceeded. Your tasks will include conducting regular site visits, providing support and training to staff, and implementing operational improvements to enhance efficiency and quality. Your schedule will typically be Monday through Friday, allowing for a balanced work-life dynamic while keeping you engaged with your teams. However, you will also be on-call for emergencies as needed, requiring quick problem-solving and decision-making skills. This role demands an empathetic approach to leadership, so you can expect to foster strong relationships with both employees and clients, ensuring a high-performing and customer-centric environment. ESSENTIAL FUNCTIONS • Establish working relationships with Clients., • Perform required location inspections and touchbases ( minimum of 1x ins and 2 TB per qtr)., • Report and resolve Inspection deficiencies. Urgent within 24 hours., • Managing Staff:, • Screen, Hire, Onboard, and Terminate staff., • Train Custodial Technicians supporting Area Sups & Acs ., • New Account setup oversight., • Assist to training staff with Clocking In/Out as needed., • Monitoring employee time and attendance., • Manage daily staffing schedules and adjust accordingly to ensure adequate staffing levels., • Conduct weekly payroll., • Report accidents/injury., • Address and resolve any employee performance issues., • Notify HR/Payroll and Operations of ALL staffing changes., • On-Call for Emergency situations/calls - evenings and weekends., • Create Supply Orders as needed., • Submit service requests to the office., • Update account spreadsheet as directed., • Responsible for KPIs within region., • Experience with Commercial cleaning industry a plus., • Must speak fluent English and Spanish., • Detail oriented and strong communication skills (email, phone)., • Results oriented: the ability to resolve challenges and emergencies at a moments notice., • Multi task oriented: The ability to handle multiple projects at a time., • Customer focused with a can-do approach to problem solving., • Knowledge of administrative and clerical procedures., • Working Knowledge of email, spreadsheets, smartphone and relevant software applications., • Knowledge of administrative and clerical procedures., • Clean DMV report & License. So, what do you think? If you feel this is the right job for you, go ahead and apply! We look forward to meeting you! Applicants must be 18 years of age or older to be considered for employment.

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

ASM Global - JobID: R100120913 [Material Handler / Freight Handler] As a Warehouse Associate at ASM Global, you'll: Receive and inspect incoming shipments for accuracy and damage; Organize and maintain inventory within the warehouse; Operate forklifts and other warehouse equipment safely; Prepare an

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen

ALDI - - Responsibilities: Receives inbound or selects outbound incoming stock to fulfill orders; Relocates merchandise throughout the warehouse according to product handling guidelines; Sorts, organizes and loads merchandise for shipment and unloads incoming shipment from trucks/back-hauls; Perfor

ALDI - - Responsibilities: Receives (Inbound) or selects (Outbound) incoming stock efficiently to effectively fulfill orders received from stores; Relocates merchandise throughout the warehouse according to product handling guidelines; Sorts, organizes and loads merchandise strategically in prepara

Responsibilities: Load and unload goods; Select and palletize items; Audit and repack commodities; Sort and clean work areas; Follow site leadership directions.

Savers Value Village - 2309 Eggert Road - Responsibilities: Assist with warehouse operations and production tasks at Savers Tonawanda.

Cintas Corporation - - Responsibilities: Drive company trucks to designated areas for unloading of soiled products; Load clean uniforms, floor mats and additional customer products onto trucks based on routes; Maintain cleanliness of the work area; Meet or exceed a standard for quantity and quality

PrideStaff - - Responsibilities: Operate forklift safely and efficiently; Load, unload, move, and stage materials; Assist with shipping and receiving tasks; Pick, pack, and prepare orders; Maintain inventory organization and general warehouse cleanliness.

Nesco Resource - - Responsibilities: performing routine maintenance on all CNC machinery and equipment; troubleshooting and repairing machinery and equipment; ensuring a safe and functional environment; The Machine Maintenance Technician will perform maintenance and repair of all CNC machinery and

PrideStaff - - Responsibilities: Operate forklift to load/unload and sort merchandise; Scan barcodes on merchandise; Occasional lifting and sorting of merchandise; Maintain a clean and safe work environment; Complete other projects as assigned.

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car

PrideStaff - - Responsibilities: Unload and sort merchandise off of delivery trucks; Count merchandise received and record data utilizing company system; Receive incoming purchase orders into the system and verify accuracy; Examine merchandise received and communicate incorrect or defective merchan

Valmont Industries - - Responsibilities: Pick and pack items based on customer orders; Perform inventory control activities including cycle counts; Operate forklifts and other production equipment; Lift up to 50 pounds and maintain safety compliance; Maintain area housekeeping.