General engineer jobs in Levittown, New YorkCreate job alerts

Staff Mechanical Design Engineer, EPC Locations: Reno NV Carson City NV San Francisco CA Medical, Dental, 401(k) Pay Range: $160-$200K The Mechanical Engineers is part of the Infrastructure Development team and is the Mechanical Engineer of Record on projects (Hazardous occupancy, clean and dry spaces, chemical process / industrial plants), responsible for mechanical and plumbing deliverables (specifications, calculations, permit / construction documents, construction administration) Responsibilities: • Design ownership for a wide range of mechanical and plumbing systems including: industrial/non-potable water, HVAC systems (labs, offices, industrial plants), process heating / cooling systems, humidifiers, dehumidifiers, abatement systems (dust collectors, scrubbers), cooling towers, fans/pumps, plumbing, etc., • Review conceptual designs from developing Engineers and identify technical and financial risks., • Responsible for designing/reviewing mechanical engineering deliverables with respect to code compliance and ensuring design maintains the highest level of quality., • Develop and improve project workflows and standards to ensure each design is consistently excellent., • Participate in on-field construction and commissioning activities by serving as the point of contact for technical questions and real-time issue resolution., • Multi-discipline collaboration on the development of equipment general arrangements, P&IDs, isometrics, tie-in lists and material takeoffs., • Travel to project site and meetings as needed.Desired Qualifications:, • 8+ years of work experience in HVAC and Plumbing/FP design., • Bachelor’s Degree in Mechanical Engineering or similar discipline., • Licensed Professional Engineer with NCEES record with ability to apply for NV and SC, • Expert familiarity with ICC including International Energy Conservation, Mechanical, Plumbing and Fire Protection Codes, NFPA standards, SMACNA duct construction standards, ACGIH Ventilation Practices and ASHRAE, • Expert in designing condenser fluid heat rejection systems, chillers, boilers, air handling units, air and water source heat pumps, dust collectors, humidifiers, dehumidifiers, fans, and pumps., • Experience with the following is preferred: Abatement systems (thermal oxidizers, dry and wet scrubbers), Heat Exchangers (shell/tube, plate/frame, brazed fin), Control Valves and Instrumentation, and Heat Recovery Systems., • Working knowledge of writing sequences of operation for HVAC and chilled water systems., • Ability to specify ductwork material and size for various ducted exhaust systems and pressure classes., • Ability to specify pipe material and size for various thermal hydronic systems., • Ability to create or edit construction specifications covering mechanical, process piping and plumbing systems., • Proficient in the use of AutoCAD required. Revit experience is highly preferred., • Experience sourcing and specifying mechanical equipment and executing RFP process., • Strong experience with engineering software packages: Pipe-Flo, AFT Arrow or other hydraulic modeling application, Caesar II, AspenTech applications and/or Applied Flow Technology applications, Carrier HAP, Trane Trace, Navisworks, Bluebeam.We are an Equal Opportunity Employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity, or any other legally protected status. All qualified applicants will receive consideration for employment without regard to any of these characteristics.PandoLogic. Keywords: Mechanical Design Engineer, Location: Hempstead, NY - 11551

Project Engineer We are looking for a Project Engineer to join our Target Rock team! As our Project Engineer, you will be responsible for directing all engineering aspects of assigned projects related to design, development, and supply of valves and other equipment for Navy Nuclear applications. You will provide support to planning, purchasing, manufacturing, quality, contracts, programs, and assembly departments, as required, including proposals needing engineering inputs, engineering changes (ECOs), vendor support, quality audits and corrective action boards, and dispositioning of non-conforming hardware to resolve any in process issues and/or maintain product flow. You will act as the integration owner and problem solver responsible to ensure technical issues and questions do not impede on time delivery while providing the primary technical support to Navy Nuclear Customers. Location: East Farmingdale, NY Salary/hourly rate: $85,000 to $95,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Your Challenge • Provide timely support to contracts, programs, planning, purchasing, manufacturing, quality, assembly departments, as required, from proposal through delivery, • Support bid and proposal activities for Navy Nuclear Products, • Review of purchase order technical requirements including specifications for compliance with proposed design, • Provide the primary technical interpretation of applicable specifications and codes imposed on deliverable items, • Prepare and, if applicable, make the appropriate technical submittals to Navy Nuclear Customer, • Preparation design drawings and procedures, as necessary, to meet order requirements, • Release of design drawings and procedures, • Preparation and review of design and qualification reports, if necessary, • Direct qualification test programs and any other testing program contracted by Navy Nuclear Customer, • Disposition of non-conforming equipment in a timely manner, • Prepare the technical instructions for assembly and test operations ensuring contract requirements are fulfilled, • Resolve technical issues during product flow from Engineering Release through product shipment, • Notify program manager of any potential issues that may affect progress of the project, • Monitor hardware through TR Operations and with our suppliers to ensure there are no technical issues stopping product flow, • Report component and valve status to the customer when requested, • Act as Project Manager for Special Projects (Design/Development), when assigned, • Travel to customers/subvendors as required, • Prepare Engineering Ordering Specifications (EOS) and Procurement Specifications (PRS) adequately to ensure all technical requirements are sufficiently passed to suppliers, • Must be a US citizen with a Government Security Clearance, • Additional responsibilities as assigned by Manager. What You Bring • Knowledge of products and industry requirements., • Working knowledge of applicable product specifications., • Knowledge of computer programs such as Microsoft Office Suite, Mathcad, AutoCAD, and ANSYS EDUCATION / TRAINING: • Four (4) year Bachelor of Science degree in Engineering (Mechanical or Nuclear) or equivalent experience, • Professional Engineering Registration or advanced Engineering Degree (preferred), • Power Plant Systems training (preferred), • Knowledge of Mathcad, AutoCAD, and ANSYS (not required, but preferred) Who We Are Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Manufacturing Engineer We are looking for a Manufacturing Engineer to join our Target Rock team! As our Manufacturing Engineer you will interact with and support the machine shop production and personnel. The individual receives minimum direction from the Plant or Manufacturing Engineering Manager regarding methodology of manufacturing. The individual is responsible to generate methods in detailed format for Manufacturing Production. The individual will perform all necessary tool and fixture designs for both manufacturing and quality requirements. The individual will interact with both in-house manufacturing personnel, as well as vendor interaction in the support of all tool and fixture fabrication. The individual supports CNC Programming methods within our manufacturing facility. Location: East Farmingdale, NY Salary/hourly rate: $83,800 to $110,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge • Generates Operation Sheets and Operation Sketches to support all phases of manufacturing within the facility., • Designs necessary tooling and fixtures required to support manufacturing processes., • Maintain all applicable manufacturing project documentation., • Additional responsibilities as assigned by Supervisor., • Support Manufacturing Engineering Department in the absence of the Senior Manufacturing Engineer. What You Bring • Must be a US citizen, • Ability to methodize parts with minimum supervision. Knowledge of machine shop practices and techniques., • Design and overview tool and fixturing requirements for manufacturing components., • Basic knowledge of raw materials and related machinability. Ability to define applicable feeds - speeds combinations for established manufacturing process., • Ability to generate CAD drawings., • Capable to analyze manufacturing equipment or tooling problems to efficiently implement solutions to economically solve these production problems in a timely manner., • Knowledge of computer-controlled machine tools., • Must possess the mental capacity to comprehend information provided daily and make own decisions. EDUCATION / TRAINING: • Associate Degree minimum in Manufacturing/Mechanical Technology or equivalent related field or a commensurate level of related experience., • Five (5) years minimum experience performing manufacturing engineering responsibilities, inclusive of manufacturing methods, tool and fixture design, and budget and cost analysis., • Working knowledge of Mastercam CAD/CAM software version 8.xx or greater. Who We Are Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Sr. Project Engineer We are looking for a Sr. Project Engineer to join our Target Rock team! You will direct all engineering aspects of projects related to design, development, and supply of high-pressure valves for nuclear power applications or industrial valve applications. Ensures valves supplied meet customer purchase order and specification requirements as well as all industry related codes. You will provide support to planning, purchasing, manufacturing, quality, contracts, programs, and assembly departments, as required, including proposals needing engineering inputs, engineering changes (ECOs), vendor support, quality audits and dispositioning of non-conforming hardware to resolve any in process issues and/or maintain product flow. Location: East Farmingdale, NY Salary/hourly rate: $94,700 to $136,900 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge: • All Essential Functions listed on the Project Engineer (Energy Products) Job Description, • Assists the Engineering Manager in supporting Energy Products Sales bid and proposal activities., • Assists the Engineering Manager in providing department personnel training., • Participates and represents EP Project Engineering on cross functional teams., • Assists the Engineering Manager in supervising day-to-day EP Project Engineering functions, • Review of specifications for compliance with proposed design., • Preparation and release of design drawings and procedures., • Preparation and review of design and qualification reports., • Direction of qualification test programs., • Interpretation of applicable customer specifications and industry codes (ASME BPVC, ASTM, ANSI, AMS, IEEE, etc.), • Disposition of non-complying equipment in a timely manner., • Resolution of assembly and test problems., • Supports Energy Products Sales bid and proposal activities., • Provide technical support for customers as required, • Ensure all project technical requirements are captured on the project's bill of material, • Additional responsibilities as assigned by Manager/Supervisor. What You Bring: • Ten (10) years of valve and/or power plant experience., • Must be a US citizen, • Knowledge of valve products and industry requirements., • Comprehensive knowledge of configuration management and design control, • Working knowledge of applicable ASME and other codes., • Strong analytical and decision-making skills, • Knowledge of computer programs such as Microsoft Office Suite, Mathcad, and ANSYS, • Must possess the mental capacity to comprehend information provided daily and make own decisions. EDUCATION / TRAINING: • Four (4) year Bachelor of Science degree in Engineering (Mechanical or Nuclear), • Master of Science degree in Engineering (preferred), • Professional Engineering Registration (preferred), • Power Plant Systems training, • Valve design and manufacturing, • Product application #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Additive Manufacturing Engineer We are looking for an Additive Manufacturing Engineer to join our Target Rock team! As ourAdditive Manufacturing Engineer you will direct and/or perform the design, development, and execution of Additive Manufactured components and assemblies. You will direct and/or perform design and development activities on new design and redesign components for Additive Manufacturing including layout, detail, and assembly drawings. Additionally, you will coordinate Additive Manufacturing activities with the Design/Drafting group, Manufacturing Engineering, Welding Engineering and Project Engineering groups. You will interface with and support programming and setups of Additive Manufacturing machines. You will provide oversight of Additive Manufacturing activities conducted by sub-tier suppliers. Location: East Farmingdale, NY Salary/hourly rate: $83,800 to $111,400 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge • Acts as Project Manager (lead) for internally (PID) and externally funded Design/Development programs, • Develop new manufacturing methods of producing valve components and assemblies via Additive Manufacturing, • Review of specifications for compliance with proposed Additive Manufacturing technologies., • Evaluate and implement use of new Additive technology. Selects and recommends new Additive equipment. Oversees procurements and installations of new equipment. Develops Additive procedures and training of personnel for the utilization of new equipment. Supports operation of Additive equipment, • Prepare 3D models, and 2D layouts, assembly, and detail drawings, • Performs analysis and calculations to support and justify Additive Designs, • Defines and executes qualification test programs for Additive Manufactured components/assemblies, • Designs necessary tooling and fixtures required to support Additive Manufacturing processes., • Standardize processes for Additive Manufacturing Methods and manufacturing techniques., • Interface with Manufacturing, Welding and Quality Control to ensure manufacturability and inspectability of components designed., • Additional responsibilities as assigned by Supervisor/Manager. What You Bring • Four (4) year Bachelor of Science degree in Engineering (Mechanical, Welding, or Manufacturing), • Must be a US citizen with (or ability to obtain) a Government Security Clearance, • Minimum of two (2) years of 2D and 3D CAD experience, • Knowledge of Additive Manufacturing technologies and industry requirements., • Knowledge of computer-controlled machine tools., • Knowledge of analysis techniques (tolerance/fit-up, structural, thermal, flow, etc.), • Working knowledge of NAVSEA 250-1500-1, ASME B&PV Code and/or SDB-63/VDM-71, as well as other applicable industry codes (e.g. Y14.5, B16.5, B16.34, B18.3, B31.1) preferred, • Working knowledge of Welding technologies and processes, • Knowledge of computer programs such as Microsoft Office Suite, Mathcad, LabVIEW, NX, Teamcenter and manufacturing equipment software. Who We Are Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Job DescriptionAssociate Civil Engineer. Requisition: 82392.PSEG Company: PSEG Long Island.Salary Range: $ 67,200 - $ 106,400.Work Location Category: Hybrid Fixed - Hicksville, NY. We’re one of the country’s largest energy companies, with a vision of powering a future where people use energy more efficiently and it’s safer and delivered more reliably than ever. We’re also deeply connected to the communities we serve, with more than 13,000 employees working together to support our customers and make a difference every day. Here, you’ll have the stability and exciting opportunities that come with being a Fortune 500 company — along with a supportive, friendly work environment where your contributions are valued. We know life isn’t one-size-fits-all, and neither is work. That’s why we offer flexible work options depending on the role. In support of this model, roles have been categorized into one of three work location categories: • Onsite – roles where employees are expected to be onsite daily., • Hybrid fixed – roles that are a mix of remote work and onsite work fixed days each week., • Hybrid flexible – roles that are a mix of remote work and onsite work, but the onsite requirements have greater flexibility. (i.e. 5-8 days a month vs. set days each week). As an employee, if you are regularly scheduled to work 20 or more hours per week, you will have access to a wide range of comprehensive benefits designed to support your total well-being: medical, dental, vision, paternal leave and family leave programs, behavioral health programs, 401(k) with company match, life insurance, tuition reimbursement, and generous paid time off. More than 13,000 people already call PSEG their work home, taking pride in providing safe, reliable service to millions of customers. If you’re looking for a place where you can build a meaningful career and help power and support our communities, we’d love to welcome you to the team. PSEG is not offering visa sponsorship for this position. Job Summary:As the Civil Engineer, your responsibility is to perform engineering and design to ensure successful completion of Long Island Transmission & Distribution construction projects. Job Responsibilities: • Prepare & check civil engineering calculations and drawings in accordance with the latest industry codes & standards using computer programs such as TeamCenter, AutoCad, Staad III, Microsoft Office, etc. in support of the modifications and additions., • Approve vendor drawings and shop drawings. Prepare, update and analyze cost estimates and budget documents., • Evaluate soil boring data and soil reports. Determine the load bearing capacity and settlement parameters for foundation design. Select pile type and furnish design., • Participate in site investigations, prepare as-built sketches of existing field conditions for design purposes, witness & perform key inspections during the course of construction and resolve field problems encountered during construction., • Participate in project meetings for the development and subsequent progress of projects with civil engineering requirements. Prepare project documents, prepare bid packages, prepare contract documents, prepare specifications, evaluate contractor proposals and participate in contractor pre-award meetings., • Prepare general scope of work and procurement documents to obtain outside consultants for engineering assistance. Monitor consultants as work progresses. Evaluate and approve consultants’ final reports, drawings & specifications., • Perform field inspections and prepare formal inspection reports with recommendations for existing facilities regarding safety, repair and modification. Perform field inspections and testing of various secondary containment systems for petroleum and hazardous material products. Job Specific Qualifications: • BS Degree in Civil Engineering., • EIT Certificate and the ability to obtain Professional Licensure in NYS., • Experience in structural analysis, reinforced concrete, structural steel and soil mechanics. Experience with marine structures is required., • Knowledge of AISC, ACI, ASCE, NESC, NYSDOT, NYS & local building codes., • Familiarity and experience in document management systems ( e.g.TeamCenter), 3D structural analysis and design software (i.e., Staad III) and AutoCAD., • Knowledge of ANSI, ASTM, National Electrical Safety Code (NESC), National Electrical Code (NEC) and other related guidelines related to electric transmission system engineering, design and operation (latest codes). Familiarity with Occupational Safety Health Act (OSHA) guidelines., • Experience with working with other engineering disciplines., • Experience with using Microsoft Office computer programs such as Word, Excel, Access and Outlook., • Must possess a valid U.S. Driver's License and maintain a satisfactory driving record., • As an employee of PSEGLI, you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations. Desired:, • Knowledge of engineering design and analysis of underground electric transmission systems including 23-345 KV pipe type cable and solid dielectric cable systems. Knowledge of AutoCAD and TeamCenter., • Knowledge of the National Electrical Safety Code (NESC), National Electrical Code (NEC) and other related guidelines related to electric transmission system engineering, design and operation. Familiarity with Occupational Safety Health Act (OSHA) guidelines., • Demonstrated verbal, written, interpersonal communication skills and computer skills. Some positions at PSEG require access to information covered by the Department of Energy’s regulation 10 CFR 810 (Part 810). If applicable, the successful applicant must prove they are: (1) a citizen or national of the USA; OR (2) a lawful permanent resident of the United States (Non-Conditional Permanent I-551 / Green Card / Permanent Resident Card holder); OR (3) a citizen, national, or permanent resident of a “Generally Authorized” destination on the attached list and not also a citizen, national, permanent resident of any country not listed; OR (4) a “Protected Individual” under the Immigration and Naturalization Act (8 U.S.C 1324b(a)(3)). As an employee of PSEG Long Island, you should be aware that during storm/outage restoration efforts, you may be required to perform functions different from normal operations and work extended hours beyond your regular work schedule. You may also be required to work on premise or in an alternate location as directed by the company. For all roles, PSEGLI’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing. Employees who are hired or transfer into a federally regulated role (including positions covered by USDOT, PHMSA, or NRC regulations) are subject to random drug and alcohol testing, inclusive of marijuana. Although numerous states throughout the country have legalized marijuana/cannabis products recreationally and medically, the use of these products are prohibited for employees in federally regulated roles. Please note that the use of CBD products may result in a positive drug test for THC/Marijuana and such use is not a legitimate medical explanation for a positive result. If you are a current PSEG employee and offered an opportunity with PSEG Long Island, you will be treated as a new hire. Please note that as a new hire to the Long Island subsidiary, your benefits will change and generally will be consistent with other similarly situated PSEG Long Island new hires. Similarly, for PSEG Long Island employees who accept job opportunities with PSEG or any of its subsidiaries (other than PSEG Long Island), their benefits will change and generally be consistent with other similarly situated new hires of that company. PSEGLI is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, sex, age, marital status, sexual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals. PSEGLI is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-3845 or email accommodations@pseg.com. If you need to request a reasonable accommodation to perform the essential functions of the job, email accommodations@pseg.com. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision. ADDITIONAL EEO INFORMATION: (Click link below) Know your Rights: Workplace Discrimination is Illegal.

Job Description$85,000 - $115,000 + VIP Bonus $85,000 - $115,000 + VIP bonus Vertafore is a leading technology company whose innovative software solutions are advancing the insurance industry. Our suite of products provides solutions to our customers that help them better manage their business, boost their productivity and efficiencies, and lower costs while strengthening relationships. Our mission is to move InsurTech forward by putting people at the heart of the industry. We are leading the way with product innovation, technology partnerships, and focusing on customer success. Our fast-paced and collaborative environment inspires us to create, think, and challenge each other in ways that make our solutions and our teams better. We are headquartered in Denver, Colorado, with offices across the U.S., Canada, and India. As a Software Engineer II, you will be working within an energetic team implementing solutions that support a wide range of customers. You will develop high quality applications. You will also have opportunities to bring your creative ideas to the table to deliver better solutions to our users. If you love technology, have a passion for software, are hungry to learn, and are driven to contribute to a world-class team of engineers, you’re who we are looking for. Core Requirements and Responsibilities: Essential job functions included but are not limited to the following: • Contributes independently, • Responsible for developing new features and supporting/bug fixing existing features, • Unit and integration testing, • Debugging issues across the whole stack - OS, DB, applications, and network, • Continued ownership of technical growth including: product and business knowledge, problem solving skills, technical knowledge, process knowledge, • Closely follow industry trends and the open source community Knowledge, Skills and Abilities: • Ability to make decisions in their area of responsibility that help maintainability, reuse, security, and performance, • Ability to diagnose issues and provide solutions for multiple functional and technical areas within a product, • Can independently frame problems and perform relevant research, • Can communicate clearly to explain design decisions, • Self-motivation, • Excellent problem-solving, • Drive to improve, personally and professionally, • Collaboration with peers Qualifications: • Bachelor’s degree in Computer Science (or related technical field) or equivalent practical experience, • Experience with Agile software development, • Have a passion for innovating and crafting clean code, • 2-3 years of professional experience with C#, • 2-3 years of professional experience with MSSQL, • Experience with User Interface Design, • Understands the value of unit testing, • Enjoy solving problems through the entire application stack, • Are interested and capable of learning other programming languages as needed. Additional Requirements and Details: • Travel required up to 10% of the time., • Occasional lifting and/or moving up to 10 pounds., • Frequent repetitive hand and arm movements required to operate a computer., • Specific vision abilities required by this job include close vision (working on a computer, etc.)., • Frequent sitting and/or standing. THE VERTAFORE STORY Over the past 50 years, Vertafore has advanced the entire insurance distribution channel with the best software solutions in the industry. Today, we’re proud to say hundreds of thousands of Vertafore users rely on our solutions to write business faster, reduce costs, and fuel growth by increasing collaboration and streamlining processes. Vertafore leads the industry with secure, cloud-based mobile products that provide superior reporting and analytics, delivering actionable insight— right when customers need it most. We partner with other leading technology companies to deliver comprehensive solutions to improve the way our customers do business and serve their customers. The Vertafore Way Insurance is about relationships, and technology should make those relationships stronger. That’s why, at Vertafore, it’s our mission to transform the way the industry operates by putting people at the heart of insurance technology. By focusing on our customers, becoming better every day, and delivering results you can see, we provide the level of trust and security that insurance is all about. · Bias to Action: We're united by an innate drive to take action and make a difference in the technology and insurance spaces. · Win Together: We work together as one team, showing empathy and respect along the way. · Show Up Curious: We work to challenge one another to push boundaries and think beyond the box. · Say It, Do It: We honor every one of our commitments because integrity is important to us. · Customer Success is Our Success: We cultivate authentic relationships and follow up by actively listening to their needs. · We Love Insurance: We appreciate the impact insurance has on the world. Is this role not an exact fit for you? Keep an eye on our Careers Page for other positions! Vertafore is a drug free workplace and conducts preemployment drug and background screenings. The selected candidate must be legally authorized to work in the United States. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Vertafore strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law. We do not accept resumes from agencies, headhunters, or other suppliers who have not signed a formal agreement with us.

Job Description Location This position is 100% on-site and reports to our office in Syosset, NY and various client sites. You must be local or willing to relocate at your own expense. Job Summary We are seeking a highly motivated and skilled Security Systems Estimator to join our security consultancy company. In the role you will be responsible for providing technical expertise, accurate cost estimates, and preparing the necessary contracts for Security Alarm, Video Surveillance, Intercom, and Access Control system projects. You will play a crucial role in ensuring the successful execution of projects by collaborating with and taking directions from other engineering members, sales teams, and project managers. The ideal candidate should have a strong background in problem solving, excellent analytical skills, and the ability to manage working on multiple projects concurrently and ideally bring some industry experience to the table. Salary Range $22.00 per hour - $26.00 per hour Hours Monday – Friday, 08:00am – 05:00pm. Responsibilities 1. Project Estimation: • Analyze project requirements, specifications, and drawings to prepare accurate cost estimates for security system installations, upgrades, and integrations., • Collaborate with sales teams to review project scope, identify customer needs, and provide comprehensive cost breakdowns., • Research and source pricing information for security equipment, materials, labor, and subcontractors to ensure competitive and cost-effective estimates., • Prepare detailed proposals and contracts, including scope of work, pricing, and timelines, for client submission. 1. Project Engineering: • Assist project managers in the technical evaluation and selection of security system components and technologies to meet project requirements., • Collaborate with clients, architects, engineers, and other stakeholders to design and engineer effective security solutions., • Prepare and review system designs, engineering drawings, and technical specifications., • Provide technical support and guidance to field technicians during project implementation. 1. Project Coordination: • Assist in supporting communication with clients, subcontractors, suppliers, and internal teams to coordinate project activities, resolve issues, and provide regular updates., • Participate in project meetings, providing technical expertise and recommendations as needed., • Be able to contribute to the analysis of project progress, identify deviations, and implement corrective actions to maintain project schedule and quality standards. 1. General Office: • Maintaining Office areas, • Any and all other duties as assigned by the management team., • Ensuring compliance with requirements in terms of legality and liability., • Assisting with monitoring and ordering office supplies and project-related materials., • Coordinating meetings, site visits, and project timelines with internal teams and clients., • Supporting communication with suppliers to ensure timely delivery of equipment and materials. Basic Qualifications • Two (2) year Associate Degree or equivalent credits towards a four (4) year Bachelor’s Degree, • In depth knowledge of Microsoft Office Suite, including Microsoft Project, • Excellent analytical and problem-solving skills, with attention to detail., • Ability to read and interpret technical drawings, specifications, and blueprints., • Must be able to fluently communicate in English with a working knowledge of grammar and spelling required., • Effective communication and interpersonal skills to collaborate with clients & team members, both verbal and written., • Strong organizational and time management abilities to handle multiple projects simultaneously., • Valid Driver’s License and clean driving record. Preferred Qualifications • Degree in Stem Field or equivalent., • Proven experience as a Project Engineer, Estimator, or similar role., • Proficiency in AutoCAD., • Knowledge of security systems, including access control, CCTV, intrusion detection, and related technologies., • Knowledge of local building codes, regulations, and industry standards related to security systems is a plus. Working Conditions • The majority of work is performed in an office environment, with limited opportunities for on-site job visits. Employee may occasionally be required to lift up to 20 lbs. What awaits you at Intelli-Tec Security: • Benefits that include Medical, Dental, Vision, 401k, and PTO, • Joining our team offers an exciting opportunity to work on innovative security solutions while enjoying a competitive salary, comprehensive benefits, and a dynamic environment for professional growth. Employer’s Disclaimer: • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. INDITNY

Job DescriptionMust be US citizen or Green Card Holder and Local NY/NJ. Job Summary: The position is responsible for driving Implementation and supporting projects and other Network Engineers in their day-to-day operational activities as each person will bring their unique skill sets with them to the organization. This position is a direct report to the Technology Group Product Manager with understanding of business goals, business processes, and technology expertise in these areas. This position is responsible for configuring, testing, implementing and supporting software, hardware and systems. This position work closely with Sr. Network Engineers and Architects that drive the analysis and physical design of technical solutions. Implementation involves creating new technology based solutions whereas support involves upgrades, maintenance or issue resolution to existing technology solutions. Job Responsibilities: • Provide network implementation and consulting for data and converged communications infrastructure based largely on Cisco equipment., • While performing this role the candidate will be responsible for., • Perform network-engineering tasks such as assessing and implementing firewall rules, establishing VPNs with partner companies, routing & switching and implementing access control lists, evaluating and installing software upgrades on network and security equipment., • Engage Operations and IT Product teams to analyze security risks, propose mitigations and support network improvement projects., • Collaborate (including staff, vendors, and consultants) to identify and resolve complex, client application and hardware problems impacting availability and performance of the systems ., • Knowledge and ability to perform the roles of Network Engineer routing and switching., • After hours, call-out is required in the performance of the duties and responsibilities of this position. Job Specific Qualifications: Required Qualifications: • Bachelor’s degree., • 6 years of experience in IT networking, with at least three years experience in doing some of the following: designing, implementing, operating & managing multiple network projects and or large-scale IT systems., • Diverse experience in network/systems/security design and implementation of data network infrastructure based on security frameworks like NIST and CIS., • Demonstrated experience creating and maintaining various Secure LAN/WAN, Zero-Trust technologies and tools., • In-depth knowledge of Cisco IOS, Next-Gen firewalls , IPS/IDS, Virtual Private Networks (VPNs), Web Application Firewalls, F5 load balancers, and other network security technologies that may emerge over time., • Working knowledge of Network Security management and monitoring tools (e.g., FireMon, SolarWinds, Firepower Monitoring Center (FMC), etc.), Cisco ISE and commands to ensure quick and efficient resolution of issues., • Demonstrated ability to work independently and multi-task effectively with strong analytical ability, problemsolving skills, and attention to detail., • Demonstrated effective verbal and written communication and facilitation skills; demonstrated ability to develop business cases and sell network investment concepts and foster working relationships with key stakeholders., • Demonstrated experience defining metrics that measure success of the technology solution in addressing business and technical requirements as well as achieving the desired outcomes., • Exposure to Cybersecurity concepts and best practices. Desired Qualifications: • Cisco certifications – Cisco Certified Network Associate (CCNA) Route/Switch, Network +., • Excellent analytical and problem-solving ability., • Understanding of general IT standards, policies, best practices, guidelines, processes., • Minimum Years of Experience 2 years of experience., • Education Bachelor’s.

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate is an entry level candidate with up to 3 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities may include, but are not limited to: • Preparation of trip generation estimates, roadway volume development, parking estimates, and analyses for their projects within the team., • Assisting in the analysis of field data, reports, maps, drawings, blueprints, tests, and aerial photographs to plan projects., • Obtaining, analyzing, and interpreting demographic and other regional transportation planning data., • Use of computer-assisted engineering and design software and equipment to prepare engineering and planning documents., • Assisting in the preparation or modification of planning documents, including transportation impact studies, and traffic operational analyses, for projects., • Assisting in the collection of field data., • Serving as onsite project representative., • Use of planning software and equipment to prepare engineering, design, and planning documents., • Responsible for job-specific quality system tasks as defined in the quality manual or handbook., • Responsible for other general office duties as may be assigned., • Collaborate with engineering and design teams to develop conceptual layouts for transportation improvements, including roadway access, pedestrian and multimodal facilities., • Prepare high-level design sketches, diagrams, and visualizations to support proposals, stakeholder presentations, and client deliverables. Job Requirements: • Bachelor’s Degree in Engineering, • Engineer in Training Certification Preferred, • Experience utilizing any or all of the following: Synchro, SimTraffic, Excel, AutoCAD/MicroStation (preferred but not required), • Aptitude for detail-oriented work assignments, • Excellent oral and written communication skills, • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License, • Experience with preparing traffic and parking studies in New Jersey, New York, and Connecticut. (preferred but not required) Pay Range: $76,000 - $82,000 Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job Description The Quality Engineer will evaluate and/or appraise supplier's manufacturing capabilities to baseline their processes for conformance to various documented commodity checklists, and/or QMS special processes. Establishes part quality evaluation plans from materials requests through material receipt (full life-cycle). Provides resolution and disposition of non-conformance materials to ensure adequate corrective action. • The Quality Engineer is highly supplier-focused, requiring excellent interpersonal and communication skills (oral and written) to manage supplier quality assurance responsibilities and ensure compliance across and at all levels of the organization on major programs from design through production stages., • Evaluation of manufacturing functions and processes to ensure Quality Standards are in place, • Evaluation of inspection and testing processes, mechanisms and equipment; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications., • Participate in QMS Audits for process deficiency and correction., • Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements., • Interact in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality., • Involved in lean and six-sigma quality engineering methodologies., • Will have 'hands-on' knowledge and experience of mechanical (Machine Shop) components, assembly, subsystem and system level concepts., • Strong emphasis on RCCA and CAPA experience., • Understanding of FMEA and Process Improvements and Standardization of Processes Required Skills: • Minimum 3-5 years with LEAN Manufacturing Application experience., • 3-5 years' experience in areas of Quality Engineering such as: FMEA, SPC, RCCA, Process Control, Product Evaluation and Auditing, • 2-3 years' working knowledge and experience with ISO9100 and AS9100 QMS Processes, especially in Production and Quality Engineering, • 2-3 years' working knowledge and experience with Aircraft Parts and Material Conformity Inspections, • 3-5 years FAI experience with AS9102 (FAI) Protocol, • 3-5 years' knowledge and experience with inspection methods, techniques and protocols., • 3-5 years' experience in understanding and the application of Engineering Mechanical Processes, Standard Drawings Conventions, Interpreting Drawing Specifications (ANSI 14.5) and GD&T, • 3-5 years' experience in understanding and the application of Electronic Assembly Process and Inspection, Standard Conventions (IPC-610, J-Std-1000), Interpreting Schematic Diagrams and Specifications, • Airframe experience required, • AVMS electronic experience required, • Strong English verbal and written communication skills, • Reliable transportation must have current/active drivers' license, • Valid drivers license and auto insurance required, • US citizenship required - Trigo ADR Americas can restrict hiring to US Citizens when government contracts require us to do so. 8 U.S.C. § 1324b(a)(2)(C). Required Education (including certifications): • In lieu of a Degree, 6+ years of hands-on experience as a Quality Engineering in an Aerospace Manufacturing Environment, • High School or GED Preferred Education and Skills (including certifications): • Bachelor's degree is preferred from an accredited college in technical discipline (e.g., Industrial Engineering, Mechanical Engineering, Quality Management), • Proficient with Microsoft Office Products (Excel, Outlook, PowerPoint, Word), • Compatible certifications or related college courses, • Team-minded, communicative, proactive, stress-resistant, assertive, • Strong interpersonal communication and problem-solving skills WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Benefits: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Pay Range: $34 to $42 hourly, please note that the salary information is a general guideline only. Trigo considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Company DescriptionTRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications. TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans. NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.\r\n\r\nThank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.\r\n\r\nTRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.\r\n\r\nNOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,

Job Description Job Title: Machine Maintenance Engineer Manager 1st Shift Location: Garden City, NY, US, 11530 Position Summary: The Machine Maintenance Engineer Manager ensures safety is the top priority while supporting Production needs. This hands-on role oversees the installation, repair, and upkeep of facilities, equipment, and offices. The ideal candidate has detailed knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) and excels at designing maintenance procedures, tracking budgets, performing inspections, and executing repairs. Supervisory Responsibilities: • Supervise and mentor employees in the maintenance department., • Train team members in equipment maintenance, safety procedures, and operational efficiency.Duties and Responsibilities:, • Maintain a safe and compliant work environment while meeting production needs., • Work independently or collaboratively with the team to complete tasks efficiently., • Perform routine inspections and maintenance across the production floor., • Monitor, troubleshoot, and repair production and process equipment., • Coordinate with contractors to obtain repair information, parts, and procedures., • Design and implement maintenance procedures; track budgets and expenses., • Facilitate property insurance audits and implement corrective actions as needed., • Negotiate contracts with external vendors for maintenance services., • Ensure operational efficiency of electrical, mechanical, and HVAC systems., • Maintain company facilities in a clean and hygienic condition., • Perform other duties and assignments as required.Required Skills and Abilities: Machine & Equipment Repair: • Maintain, troubleshoot, disassemble, and repair production equipment safely., • Perform alignments, lubrication, coolant changes, and other routine machine maintenance., • Demonstrate versatility across multiple systems and trades.Electrical, HVAC, & Plumbing:, • Basic knowledge of electrical systems (DC and AC, 24V–480V)., • Ability to read, interpret, and modify electrical schematics and prints., • Experience with ladder logic, PLCs, VFDs, and instrumentation/control devices., • Familiarity with gas/oil heating systems, air handlers, condensers, and evaporators.Safety:, • Promote and enforce a safety-first culture on the production floor., • Knowledge of Lockout/Tagout, Arc Flash, Machine Guarding, HazCom, DOT, RCRA, and material handling.Leadership:, • Strong problem-solving, analytical, and decision-making skills., • Ability to manage multiple priorities in a fast-paced environment., • Demonstrated success leading, motivating, and coaching diverse teams., • Excellent written and verbal communication; able to interact effectively at all levels.Education and Experience:, • Bachelor’s degree required., • 5–10 years of experience in manufacturing maintenance or equivalent training., • Background in general maintenance of manufacturing machines and process equipment (automated systems, chillers, air compressors, hydraulics, pneumatics)., • Proficiency with hand and power tools., • Experience with MS Office preferred.Physical Requirements:, • Ability to lift 50 lbs., • Active role requiring standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some tasks. Pay Details: $120,000.00 to $140,000.00 per year Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

When you work at Goldfish, you're not just an employee.You're a part of something bigger.You're making an impact; a splash in the lives of the children in your community.You're moving forward a mission, you're saving lives! And you're making waves in your future, taking life lessons in and out of th

Embark on your journey as a Part-time Warehouse Associate, where you're at the heart of our operations.You'll not only handle the ebb and flow of products as they enter and leave the facility, but you'll dive into the world of inventory management for a leader in industrial distribution.This positio

Our client, a leading organization in manufacturing, is seeking a Material Handler 1st Shift to join their team.As a Material Handler 1st Shift, you will be part of the production support team, assisting skilled production workers in maintaining smooth operations.The ideal candidate will demonstrate

At TJX Companies, every day brings new opportunities for growth, exploration, and achievement.You'll be part of our vibrant team that embraces diversity, fosters collaboration, and prioritizes your development.Whether you're working in our four global Home Offices, Distribution Centers or Retail Sto

The Warehouse Associate performs a variety of warehouse/distribution related functions accurately and efficiently to ensure internal and external customer satisfaction.This position will be required to proficiently perform at least one or more distribution-related activity (e.This position is respon

Capstone is a North American supply chain solutions partner with over 650 operating locations, 19,000 associates, and 60,000 carriers.We specialize in freight management, warehouse and distribution center support, last-mile delivery, supply chain analytics, optimization, and more.Our integrated, end

Retail Warehouse & Production Associate.Position at Savers / Value Village.Pay Rate: Our starting pay ranges from $17.As one of the largest for-profit thrift operators in the United States, Canada and Australia for value priced pre-owned clothing, accessories and household goods, our mission is to c

Warehouse Associate/Backup Driver.Job purpose: To maintain the warehouse and the product contained within, as well as performing related functions, such as loading, unloading, receiving, and additional branch support activities.This will contribute to ABCO's mission of exceeding customers' highest e

Truck Driver Union/Warehouse Associate.We are looking for a Truck Driver Union/Warehouse Associate to join our Schwing Electrical Supply team in Uniondale, NY! This position offers a Monday to Friday schedule, paid holidays & paid time off! Join our team and you'll be home to play on the weekends! S

Our client in Melville Long Island NY is looking for hardworking, motivated talent to join their team.Clean and safe work environment.Working in a warehouse environment breaking down pallets.High School Diploma or GED, Must be able to read and write in English.Pass a drug screening and a background

Join Our Team: Full-Time Warehouse Associates Available!.Are you ready to be part of a dynamic and rapidly expanding company in the heart of Long Island? Nassau Candy Distributors, Inc.We are currently seeking dedicated individuals to join our team for the following positions:.Full-time positions wi

General housekeeping and cleaning as needed around the Concessions areas.

Starting wage is based on a number of factors including, but not limited to, the position being offered, location, education, training, and/or experience.Construction Resources offers additional competitive and non-financial benefits.The Material Handler will play a crucial role in the efficient and

Purpose: As a warehouse associate at Floor & Decor, you are the backbone of our retail location.Your key responsibilities will be compiling orders and replenishing and moving merchandise, whether it be on the sales floor or to a customer's vehicle.Your day will be spent checking inventory and orders

Town of Canton seeks an Assistant Project Engineer to assist in planning and execution of mass excavating and construction projects. Candidates should have an Associate Degree in Civil Engineering or equivalent experience.

Performs work under general supervision.

The ideal candidate brings at least 7 years of engineering experience, particularly in electronics, along with strong problem-solving abilities and an understanding of aerospace industry standards.

Close collaboration with stakeholders within Propulsion Engineering (Combustion Devices, Turbomachinery, and Components) and external to Propulsion Engineering (Stage, Test Stand, and Integration) is essential. Engineers are responsible for the entire lifecycle of their parts, from initial design th

As we expand our automation capabilities, we're seeking a talented Manufacturing Engineer with expertise in software, robotics, and industrial automation to join our dynamic team. What You’ll DoAs a Manufacturing Engineer in Software, Robotics & Automation, you’ll focus on introducing practical

Rocket Lab in Long Beach, CA is seeking a Spacecraft Mechanical Engineer II to develop lightweight satellite systems and mechanisms. The ideal candidate will hold a relevant bachelor's degree and have 2+ years of mechanical engineering experience, with U.

The Warehouse Associate position involves working in a fast-paced warehouse environment focused on picking and packing pool supply products accurately and efficiently for shipment.Employees are responsible for selecting items based on order requirements, preparing them for shipment through proper pa

Basic Qualifications Bachelor’s degree in engineering or related field Proven track record of engineering excellence Strong knowledge of materials, manufacturing processes, and mechanical systems for wet chemistry and/ or high temperature processing. We are a team of builders, engineers, and op

A leading beverage manufacturing company in Elma, NY is seeking an experienced engineering leader to manage complex capital projects in aseptic beverage production. Candidates must have a relevant engineering degree and substantial experience in FDA-regulated environments.

Dormont Manufacturing Co is looking for a full-time Manufacturing Engineer specializing in propulsion to work in Long Beach. The position requires a Bachelor's degree in a related engineering field, along with experience in aerospace manufacturing and strong communication skills.

Join our growing team as an Assistant Project Engineer and assist the project team in the planning and execution of successful mass excavating and construction projects! Primary Responsibilities Assists in the preparation of work orders, schedules, drawings, field measurements, subcontracts and su

What you bring to this role: BS in Electrical Engineering, Mechanical Engineering, or related discipline. Work with internal engineering teams to optimize board placement and overall connectivity strategy. Partner with manufacturing teams to ensure high success rates in engineering-to-manufacturing

We are growing our overnight team and looking for dependable, hard-working individuals to join us! This General Labor position is part of a team supporting large retail and commercial projects. Candidates with experience in general labor, construction, warehouse, installation, manufacturing, moving,

Dormont Manufacturing Co in Huntington, NY is seeking a Broadcast Transmission Engineer to maintain, optimize, and support broadcast systems.

A global innovator in materials science is seeking an experienced engineer to provide process engineering support aimed at optimizing manufacturing processes. Candidates should hold a Bachelor's degree in engineering and have at least 2 years of experience in a manufacturing environment, along with

S citizenship required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE: Master’s or PhD in aerospace or mechanical engineering; or other engineering discipline Spacecraft/satellite design experience Rapid conceptual design iteration experience Exceptional mechanical me

Responsibilities Manage crew and use equipment to perform line painting, asphalt crack filling and seal coating, power washing, epoxy flooring, and more Plan and facilitate the production of a high-quality project Communicate job status daily with the Operations Manager Maintain a safe, hazard-free

S citizenship is required, due to program requirements THESE QUALIFICATIONS WOULD BE NICE TO HAVE Master’s or PhD in aerospace or mechanical engineering; or other engineering discipline Spacecraft/satellite design experience Rapid conceptual design iteration experience Exceptional mechanical

A reputable staffing agency in New York is seeking an experienced Land Surveyor – Project Manager to oversee surveying projects from planning to execution.The ideal candidate is a licensed Professional Land Surveyor or Surveyor-in-Training with at least seven years of experience, strong technical

Relativity Space is seeking an engineer for the Vehicle Build team, focusing on cross-functional vehicle development and operability. The role requires a Bachelor's degree in engineering and 2+ years of experience.