General engineer jobs in Bay Shore, New YorkCreate job alerts

Project Engineer We are looking for a Project Engineer to join our Target Rock team! As our Project Engineer, you will be responsible for directing all engineering aspects of assigned projects related to design, development, and supply of valves and other equipment for Navy Nuclear applications. You will provide support to planning, purchasing, manufacturing, quality, contracts, programs, and assembly departments, as required, including proposals needing engineering inputs, engineering changes (ECOs), vendor support, quality audits and corrective action boards, and dispositioning of non-conforming hardware to resolve any in process issues and/or maintain product flow. You will act as the integration owner and problem solver responsible to ensure technical issues and questions do not impede on time delivery while providing the primary technical support to Navy Nuclear Customers. Location: East Farmingdale, NY Salary/hourly rate: $85,000 to $95,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Your Challenge • Provide timely support to contracts, programs, planning, purchasing, manufacturing, quality, assembly departments, as required, from proposal through delivery, • Support bid and proposal activities for Navy Nuclear Products, • Review of purchase order technical requirements including specifications for compliance with proposed design, • Provide the primary technical interpretation of applicable specifications and codes imposed on deliverable items, • Prepare and, if applicable, make the appropriate technical submittals to Navy Nuclear Customer, • Preparation design drawings and procedures, as necessary, to meet order requirements, • Release of design drawings and procedures, • Preparation and review of design and qualification reports, if necessary, • Direct qualification test programs and any other testing program contracted by Navy Nuclear Customer, • Disposition of non-conforming equipment in a timely manner, • Prepare the technical instructions for assembly and test operations ensuring contract requirements are fulfilled, • Resolve technical issues during product flow from Engineering Release through product shipment, • Notify program manager of any potential issues that may affect progress of the project, • Monitor hardware through TR Operations and with our suppliers to ensure there are no technical issues stopping product flow, • Report component and valve status to the customer when requested, • Act as Project Manager for Special Projects (Design/Development), when assigned, • Travel to customers/subvendors as required, • Prepare Engineering Ordering Specifications (EOS) and Procurement Specifications (PRS) adequately to ensure all technical requirements are sufficiently passed to suppliers, • Must be a US citizen with a Government Security Clearance, • Additional responsibilities as assigned by Manager. What You Bring • Knowledge of products and industry requirements., • Working knowledge of applicable product specifications., • Knowledge of computer programs such as Microsoft Office Suite, Mathcad, AutoCAD, and ANSYS EDUCATION / TRAINING: • Four (4) year Bachelor of Science degree in Engineering (Mechanical or Nuclear) or equivalent experience, • Professional Engineering Registration or advanced Engineering Degree (preferred), • Power Plant Systems training (preferred), • Knowledge of Mathcad, AutoCAD, and ANSYS (not required, but preferred) Who We Are Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Manufacturing Engineer We are looking for a Manufacturing Engineer to join our Target Rock team! As our Manufacturing Engineer you will interact with and support the machine shop production and personnel. The individual receives minimum direction from the Plant or Manufacturing Engineering Manager regarding methodology of manufacturing. The individual is responsible to generate methods in detailed format for Manufacturing Production. The individual will perform all necessary tool and fixture designs for both manufacturing and quality requirements. The individual will interact with both in-house manufacturing personnel, as well as vendor interaction in the support of all tool and fixture fabrication. The individual supports CNC Programming methods within our manufacturing facility. Location: East Farmingdale, NY Salary/hourly rate: $83,800 to $110,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge • Generates Operation Sheets and Operation Sketches to support all phases of manufacturing within the facility., • Designs necessary tooling and fixtures required to support manufacturing processes., • Maintain all applicable manufacturing project documentation., • Additional responsibilities as assigned by Supervisor., • Support Manufacturing Engineering Department in the absence of the Senior Manufacturing Engineer. What You Bring • Must be a US citizen, • Ability to methodize parts with minimum supervision. Knowledge of machine shop practices and techniques., • Design and overview tool and fixturing requirements for manufacturing components., • Basic knowledge of raw materials and related machinability. Ability to define applicable feeds - speeds combinations for established manufacturing process., • Ability to generate CAD drawings., • Capable to analyze manufacturing equipment or tooling problems to efficiently implement solutions to economically solve these production problems in a timely manner., • Knowledge of computer-controlled machine tools., • Must possess the mental capacity to comprehend information provided daily and make own decisions. EDUCATION / TRAINING: • Associate Degree minimum in Manufacturing/Mechanical Technology or equivalent related field or a commensurate level of related experience., • Five (5) years minimum experience performing manufacturing engineering responsibilities, inclusive of manufacturing methods, tool and fixture design, and budget and cost analysis., • Working knowledge of Mastercam CAD/CAM software version 8.xx or greater. Who We Are Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Sr. Project Engineer We are looking for a Sr. Project Engineer to join our Target Rock team! You will direct all engineering aspects of projects related to design, development, and supply of high-pressure valves for nuclear power applications or industrial valve applications. Ensures valves supplied meet customer purchase order and specification requirements as well as all industry related codes. You will provide support to planning, purchasing, manufacturing, quality, contracts, programs, and assembly departments, as required, including proposals needing engineering inputs, engineering changes (ECOs), vendor support, quality audits and dispositioning of non-conforming hardware to resolve any in process issues and/or maintain product flow. Location: East Farmingdale, NY Salary/hourly rate: $94,700 to $136,900 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge: • All Essential Functions listed on the Project Engineer (Energy Products) Job Description, • Assists the Engineering Manager in supporting Energy Products Sales bid and proposal activities., • Assists the Engineering Manager in providing department personnel training., • Participates and represents EP Project Engineering on cross functional teams., • Assists the Engineering Manager in supervising day-to-day EP Project Engineering functions, • Review of specifications for compliance with proposed design., • Preparation and release of design drawings and procedures., • Preparation and review of design and qualification reports., • Direction of qualification test programs., • Interpretation of applicable customer specifications and industry codes (ASME BPVC, ASTM, ANSI, AMS, IEEE, etc.), • Disposition of non-complying equipment in a timely manner., • Resolution of assembly and test problems., • Supports Energy Products Sales bid and proposal activities., • Provide technical support for customers as required, • Ensure all project technical requirements are captured on the project's bill of material, • Additional responsibilities as assigned by Manager/Supervisor. What You Bring: • Ten (10) years of valve and/or power plant experience., • Must be a US citizen, • Knowledge of valve products and industry requirements., • Comprehensive knowledge of configuration management and design control, • Working knowledge of applicable ASME and other codes., • Strong analytical and decision-making skills, • Knowledge of computer programs such as Microsoft Office Suite, Mathcad, and ANSYS, • Must possess the mental capacity to comprehend information provided daily and make own decisions. EDUCATION / TRAINING: • Four (4) year Bachelor of Science degree in Engineering (Mechanical or Nuclear), • Master of Science degree in Engineering (preferred), • Professional Engineering Registration (preferred), • Power Plant Systems training, • Valve design and manufacturing, • Product application #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Senior Manufacturing Engineer At Curtiss-Wright, we lead the design, engineering, and manufacturing of advanced systems and components for the aerospace and defense industry. We are seeking a Senior Manufacturing Engineer to join our team, a role that requires deep technical expertise, strategic thinking, and leadership in driving manufacturing excellence. This is an exciting opportunity for an experienced engineer to influence manufacturing processes at a high level, leading initiatives from concept through production, and ensuring the seamless transition of innovative products into full-scale manufacturing. LOCATION: Hauppauge, NY SALARY RANGE: $94,700 - $125,000/year Please note that the salary range information provided is a general guideline only, reflecting a position based in NY. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. WE TAKE CARE OF OUR PEOPLE Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * YOUR CHALLENGE: • Lead the development and implementation of advanced manufacturing methods, process flows, and operational sequences to optimize efficiency, quality, and cost., • Design and oversee the creation of tools, fixtures, and assembly processes to support complex production requirements., • Collaborate closely with design engineering to review product designs, ensure manufacturability, and drive smooth product launches., • Perform detailed manufacturing cost analyses, establish labor standards, and recommend process and tooling improvements., • Develop, maintain, and standardize manufacturing work instructions, standard operating procedures, and documentation., • Mentor and guide cross-functional teams, including design, manufacturing engineering, production, procurement, quality, and inspection., • Lead initiatives in lean manufacturing, process improvement, and labor efficiency, using data-driven analysis., • Champion 5S principles, continuous improvement, and EHS compliance throughout the manufacturing environment. WHAT YOU BRING • Bachelor's degree in Mechanical, Manufacturing, or related Engineering discipline; advanced degree preferred., • Extensive experience reading and interpreting complex technical drawings and specifications., • Proficiency with CAD tools (e.g., SolidWorks) and other manufacturing design software., • Deep understanding of mechanical and electronic assembly principles., • Advanced proficiency in Microsoft Office Suite, including Excel, Word, PowerPoint, Project, and Outlook., • Strong analytical, problem-solving, and communication skills, with meticulous attention to detail., • Proven ability to lead projects and mentor junior engineers in a collaborative, high-performance environment. Bonus Skills (Preferred but not required): • Expertise in statistical analysis and applied mathematics (probability, geometry, trigonometry)., • Familiarity with manufacturing standards, process documentation, and ERP systems., • Bilingual in Spanish is a plus. WHO WE ARE: Our Values Environmental, Social and Governance *Please note, benefits are country specific and may vary from location to location. #LI-YH1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

EnerSys Advanced Systems (EAS) is a specialized division of EnerSys-a global leader in stored energy solutions for industrial applications. EAS focuses on cutting-edge energy solutions for the aerospace, defense, and medical industries. As we continue to grow, we're looking for individuals who share a passion for these industries and want to be part of an innovative, dynamic team. Certain positions at EnerSys Advanced Systems require access to information or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other U.S. government security regulations. Candidates for these positions should be a "U.S. Person" under ITAR (U.S. citizen, lawful permanent resident, or a refugee/asylee) and/or otherwise comply with ITAR requirements for access rights to be considered for a position. What We Offer: • Generous Time Off - 3+ weeks of paid time off, plus 11 paid holidays, • Comprehensive Benefits - Medical, dental, and vision coverage for employees and dependents at a discounted rate, • Financial & Career Growth - Life insurance, short-term disability, educational reimbursement, flexible spending accounts, and an employee stock purchase plan, • 401(k) Matching - 100% match at a 6% contribution level, • Innovative Culture - We value excellence, teamwork, and long-term relationships with stakeholders, colleagues, and customers. Through innovative technology and ongoing training, we invest in our employees' skills and career development.At EAS, we don't just build batteries - we power systems and devices that protect not only individual citizens but communities across the world. If you're excited about working in an innovative, fast-paced, high-tech environment, where your contributions make a real impact, we'd love to hear from you! Compensation Range: $75,000 to $90,000 per year. Compensation may vary based on applicant's work experience, education level, skill set. Learn More About EAS Job Purpose The Manufacturing Engineer at Bren-Tronics, part of EnerSys is responsible for supporting production operations through process implementation and improvement, documentation, equipment optimization, and ensuring product quality and safety. This role works closely with operations, quality, engineering, and supply chain teams to improve efficiency, reduce waste, and maintain compliance with internal and external standards. Essential Duties and Responsibilities • Develop, optimize, and maintain manufacturing processes to improve efficiency, quality, and throughput., • Support day to day production activities by troubleshooting process issues and providing technical guidance., • Function as liaison between Manufacturing and Engineering to smoothly transition newly designed products to production., • Create and update work instructions, process documentation, and standard operating procedures., • Provide training to production operators to fully comply with work instructions, quality standards and engineering requirements, as needed., • Lead and support continuous improvement initiatives, including lean manufacturing and root cause analysis activities., • Design and implement tooling, fixtures, and equipment improvements to enhance production capability and operator safety., • Analyze production data to identify trends, process bottlenecks, and improvement opportunities., • Monitor rework and repair operations, consistently monitor and report yield issues, and regularly highlight significant findings., • Conduct failure analysis, identify root causes, and pursue effective solutions to minimize in-process defects., • Support equipment maintenance, calibration, and layout planning for efficient workflow., • Other duties as assigned. Qualifications • 3+ years in Manufacturing Engineering role, defense Manufacturing industry, strongly preferred., • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related field., • Understanding of lean manufacturing principles, quality systems, and process control., • Strong teamwork and collaboration with various groups both internal and external., • Excellent communication, written and verbal skills with cross functional teams., • Strong problem solving skills and ability to lead root cause and corrective action efforts., • Proficient with CAD software, SolidWorks a plus. General Job Requirements • Generic EnerSys is always looking to hire top talent. Therefore, we encourage our employees to refer anyone they feel would be a great addition to our organization. Know Your Rights Know Your Rights (Spanish) We use artificial intelligence to screen, assess and select applicants for open positions, including for the purposes of reviewing and ranking application materials and scoring answers to application questions. Accordingly, decisions about your application and eligibility for employment with EnerSys may be made based exclusively on the automated processing of the personal information that you submit in your application materials. Nearest Major Market: Long Island Nearest Secondary Market: New York CIty

Additive Manufacturing Engineer We are looking for an Additive Manufacturing Engineer to join our Target Rock team! As ourAdditive Manufacturing Engineer you will direct and/or perform the design, development, and execution of Additive Manufactured components and assemblies. You will direct and/or perform design and development activities on new design and redesign components for Additive Manufacturing including layout, detail, and assembly drawings. Additionally, you will coordinate Additive Manufacturing activities with the Design/Drafting group, Manufacturing Engineering, Welding Engineering and Project Engineering groups. You will interface with and support programming and setups of Additive Manufacturing machines. You will provide oversight of Additive Manufacturing activities conducted by sub-tier suppliers. Location: East Farmingdale, NY Salary/hourly rate: $83,800 to $111,400 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge • Acts as Project Manager (lead) for internally (PID) and externally funded Design/Development programs, • Develop new manufacturing methods of producing valve components and assemblies via Additive Manufacturing, • Review of specifications for compliance with proposed Additive Manufacturing technologies., • Evaluate and implement use of new Additive technology. Selects and recommends new Additive equipment. Oversees procurements and installations of new equipment. Develops Additive procedures and training of personnel for the utilization of new equipment. Supports operation of Additive equipment, • Prepare 3D models, and 2D layouts, assembly, and detail drawings, • Performs analysis and calculations to support and justify Additive Designs, • Defines and executes qualification test programs for Additive Manufactured components/assemblies, • Designs necessary tooling and fixtures required to support Additive Manufacturing processes., • Standardize processes for Additive Manufacturing Methods and manufacturing techniques., • Interface with Manufacturing, Welding and Quality Control to ensure manufacturability and inspectability of components designed., • Additional responsibilities as assigned by Supervisor/Manager. What You Bring • Four (4) year Bachelor of Science degree in Engineering (Mechanical, Welding, or Manufacturing), • Must be a US citizen with (or ability to obtain) a Government Security Clearance, • Minimum of two (2) years of 2D and 3D CAD experience, • Knowledge of Additive Manufacturing technologies and industry requirements., • Knowledge of computer-controlled machine tools., • Knowledge of analysis techniques (tolerance/fit-up, structural, thermal, flow, etc.), • Working knowledge of NAVSEA 250-1500-1, ASME B&PV Code and/or SDB-63/VDM-71, as well as other applicable industry codes (e.g. Y14.5, B16.5, B16.34, B18.3, B31.1) preferred, • Working knowledge of Welding technologies and processes, • Knowledge of computer programs such as Microsoft Office Suite, Mathcad, LabVIEW, NX, Teamcenter and manufacturing equipment software. Who We Are Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Job Description CBIZ Talent Solutions is seeking a Facilities Engineer for their Suffolk County Property Management client. This is a hands-on role supporting a multi-building property, responsible for maintenance, repairs, and preventive care across building systems, grounds, and amenities. Key Responsibilities: • Perform repairs and maintenance across HVAC, electrical, plumbing, carpentry, and general systems, • Execute preventive maintenance and manage work orders, • Coordinate and oversee subcontractors; ensure safety and compliance (OSHA), • Inspect buildings and identify maintenance needs, • Support site operations (landscaping, snow removal, events, etc.), • Participate in on-call rotation for after-hours emergencies, • Maintain tools, inventory, and documentation Requirements: • 5+ years of facilities/maintenance experience, • Strong mechanical and electrical knowledge, • Valid driver’s license with clean record, • Ability to manage multiple priorities and respond to emergencies, • Strong communication and organizational skills Preferred: • Commercial real estate experience, • Experience with Yardi, Procore, or work order systems Compensation: $75,000–$80,000 + benefits and 401(k) with match CBIZ Talent Solutions is an Equal Opportunity Employer. CBIZ Talent Solutions does not discriminate on the basis of race, ancestry, national origin, color, religion, sex, gender identity, age, marital status, sexual orientation, disability, veteran status, or any other protected classification under the law.

Job Description For more than 60 years, DDC has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The compensation for this role will be $70,000 to $105,000 annually. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary The Quality Assurance Engineer supports product quality and compliance across Manufacturing, Engineering, Product Development, Procurement, and Product Assurance. This role assists with quality planning, audits, root cause analysis, and corrective actions to ensure timely delivery of reliable, cost-effective products. The QA Engineer also works closely with cross-functional teams, suppliers, and customers while gaining exposure to product qualification, testing, and inspections. Key Position Accountabilities: • Responsible for Product Assurance Conformance and Compliance requirements, as defined by the DDC Quality Management System (QMS), • Provide day-to-day Quality Assurance Engineering support to all areas of the company (Manufacturing, Engineering, Product Development, Procurement, and Product Assurance). This includes the timely resolution of production issues in an effort to support the on-time and cost-efficient shipment of quality products, • Maintain, improve, and create quality control procedures. Ensure that performance and quality products conform to established company and regulatory standards, are properly documented to assure uniformity, and communicated to appropriate parties, • Resolve quality issues/discrepancies to full resolution. This includes, but not limited to, continuous improvement, cross-functional teams, and collaboration with suppliers, colleagues, and customers, • Responsible for understanding customer performance/quality requirements, measuring our performance against these requirements, and communicating the results to all appropriate parties, • Perform internal audits of department processes and procedures, IAW AS9100 & MIL-PRF-38534, • Analyze and investigate the root cause of non-conforming product deficiencies. This encompasses generating and analyzing failure analysis reports, review of parts, manufacturing processes, RMAs, materials issues, development of disposition, corrective and preventative actions, and verification of their effectiveness, • Review specification control drawings and generate quality plans (Product Assurance Plan), • Assist Incoming Inspection with material disposition and Material Review Reports, via the Material Review Board, • Assist In-Process & Final Inspection with product disposition and Inspection Discrepancy Reports, • Review and disposition engineering change notices, manufacturing processes, and SOP’s to ensure compliance, • Plan, monitor, and report on product qualification testing per stakeholder specifications, • Contribute technical input, as well as material and labor cost estimates in support of both tactical and strategic business opportunities and proposals, • Support customer Source Inspections at DDC, • Attend Source Inspections, Audits, and Conferences at vendor and customer sites to support the mission, • Travel ˜ 10% Job Qualifications - Education/Experience • A Bachelor’s Degree in Engineering, Mathematics, or Applied Sciences is preferred, • Six Sigma Certification (e.g. CSSGB, or comparable) is preferred, • 3 years of related experience (Manufacturing, Industrial, etc.) is preferred, • Knowledge of AS9100, MIL-PRF-38534, MIL-STD-883, and IPC-A-610 is preferred, • Demonstrated ability to develop, analyze, articulate and present technical information in both written and verbal forms, • Demonstrated ability to develop excellent working relationships with management, customers, and vendors, • Excellent time management skills Work Environment: • This position requires access to a cleanroom environment. In order to promote an environment with a low level of airborne environmental pollutants employees must at all times adhere to company procedures., • The cleanroom area is accessed via an air shower wearing an ESD lab coat and hair net This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general, the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The salary range for this role is $70,000 to $90,000 based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary The Quality Assurance Engineer supports product quality and compliance across Manufacturing, Engineering, Product Development, Procurement, and Product Assurance. This role assists with quality planning, audits, root cause analysis, and corrective actions to ensure timely delivery of reliable, cost-effective products. The QA Engineer also works closely with cross-functional teams, suppliers, and customers while gaining exposure to product qualification, testing, and inspections. Key Position Accountabilities: • Provide day-to-day QA support for production, engineering, and procurement activities., • Assist in developing and maintaining quality planning procedures to meet company and regulatory standards., • Support investigations of non-conformances, including root cause analysis and implementation of corrective and preventive actions., • Participate in internal audits and contribute to continuous improvement initiatives., • Review engineering change notices, manufacturing processes, and SOPs for compliance., • Support product qualification testing and inspections under guidance of senior QA staff., • Collaborate with suppliers and customers to resolve quality issues and ensure performance requirements are met. Qualifications: • A Bachelor Degree in Engineering, Mathematics, or Applied Sciences is preferred, • Six Sigma Certification (e.g. CSSGB, or comparable) is preferred, • = 3 years of related experience (Manufacturing, Industrial, etc.) is preferred, • Knowledge of AS9100, MIL-PRF-38534, MIL-STD-883, and IPC-A-610 is preferred, • Demonstrated ability to develop, analyze, articulate and present technical information in both written and verbal forms, • Demonstrated ability to develop excellent working relationships with management, customers, and vendors, • Excellent time management skills Work Environment: • This position requires access to a cleanroom environment. In order to promote an environment with a low level of airborne environmental pollutants employees must at all times adhere to company procedures., • The cleanroom area is accessed via an air shower wearing an ESD lab coat and hair net Physical Demands: • The physical demands described here are representative of those that must be met with or without a reasonable accommodation by an employee to successfully perform the essential functions of this job., • While performing the duties of this job, the employee is regularly required to move product and equipment and to occasionally lift office products and supplies, up to 20 pounds. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $120,000 - $160,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities: • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements: • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 7+ minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description FLSA STATUS: Salary/Exempt DEPARTMENT: Research and Development SUPERVISOR: Engineering Manager DIRECT REPORTS: No Position Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Minimum Qualifications Education: • Bachelor's of Science in engineering or related field Experience: • 5-10 years of experience of design engineering or related field, • 2-5 years of electrical connector design experience Knowledge: • Ability to create 3D Computer-aided design (CAD) models and drawings, • Ability to read drawings, specifications, test procedures, etc., • Fundamental mathematical and physical principles, • Proficient in MS Office, • Geometric Dimensioning and Tolerancing (GD&T) Skills: • Good oral and written communication and presentation skills, • Great interpersonal skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Job Responsibilities • Assist with research and development, new product introduction, and production deployment., • Create CAD models, drawings, specification sheets, and prototypes for new and existing products utilizing Solidworks., • Modify existing products to improve efficiency and performance., • Design for manufacturability., • Research materials and production costs to determine manufacturing requirements., • Ensure product designs conform to customer and government specifications., • Test designs to ensure they meet safety, usability, and environmental impact standards., • Analyze data from tests and identify opportunities for improvement., • Collaborate with engineering, sales, procurement, and production teams., • Present designs and prototypes to customers and colleagues., • Create BOMs and routings for new products, legacy products, and engineering changes as necessary., • Develop and manage costing analysis as necessary during product development and deployment., • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system., • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc., • Manage projects, including budgets, schedules, and costs when applicable., • Perform DFMEAs, PFMEAs, and Risk Assessments., • Ensure that the company's designs and designing processes comply with all government laws and regulations., • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision making., • Collaborate with quality team to assure products are being produced to applicable specifications., • Evaluate quality control processes and make recommendations for improvements in quality control., • Devise procedures to inspect and report quality issues., • Assure the reliability and consistency of product manufacturing by checking processes and final output., • Facilitate proactive solutions by collecting and analyzing manufacturing data., • Document and optimize design procedures to ensure replicability and compliance with internal and external standards., • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis., • Assist in the preparation for quality audits., • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Other responsibilities, initiatives and ad-hoc projects as required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for prolonged periods of time, working at a computer, stand, bend, twist, and lift up to 25 lbs. The noise level in the work environment is usually low to moderate.

Job Description For more than 60 years, Power Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The compensation for this role is $100,000 to $140,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The QA Engineer, Sr plays a key role in driving product excellence and customer satisfaction by leading quality initiatives and resolving complex challenges. This includes collaboration with cross-functional teams, suppliers, and customers while shaping best practices in compliance, testing, and inspections. The Senior QA Engineer also mentors junior team members and have the opportunity to influence quality strategy across the organization. Key Position Accountabilities: • Provide day-to-day Quality Assurance Engineering support to all areas of the company (Manufacturing, Engineering, Product Development, Procurement, and Product Assurance). This includes the timely resolution of production issues in an effort to support the on-time and cost-efficient shipment of quality products., • Establish and maintain quality planning procedures. Ensure that performance and quality products conform to established company and regulatory standards, are properly documented to assure uniformity, and communicated to appropriate parties., • Resolve quality issues/discrepancies to full resolution. This includes, but not limited to, cross-functional teams and communication with suppliers and customers., • Responsible for understanding customer performance/quality requirements, measuring our performance against these requirements, and communicating to appropriate parties., • Perform internal audits of department processes and procedures., • Analyze and investigate the root cause of non-conforming product deficiencies. This encompasses generating and analyzing of failure analysis reports, review of parts, manufacturing processes, RMAs, materials issues, development of disposition, corrective and preventative actions, and verification of their effectiveness., • Review specification control drawings and generate quality plans (PAP, PPAP)., • Assist Incoming Inspection with material disposition and Material Review Reports., • Review/approve engineering change notices, manufacturing processes, and SOP’s to insure compliance and up-to-date., • Plan, monitor and track product qualification testing per customer specifications or DDC’s internal procedures., • Contribute technical input, as well as material and labor cost estimates in support of tactical business opportunities and proposals., • Perform Source Inspection at vendor sites, and support customer Source Inspection at DDC, as needed., • Travel <10%, • Provide training, mentorship, and coaching to junior members of the Quality Assurance team to ensure their continuous development and alignment with company quality standards, processes, and best practices. Qualifications: • Bachelor’s degree in appropriate Engineering, Industrial Engineering, Mathematics/Statistics, or Applied Sciences is desired. Six Sigma knowledge a plus., • Minimum 7 years related Quality Assurance Engineering experience., • Knowledge of quality, military, and industry standards AS9100, MIL-PRF-38534, MIL-STD-883, and/or IPC-A-610 desired., • Demonstrated ability to develop, analyze, articulate and present technical information in both written and verbal forms., • Demonstrated ability to develop excellent working relationships with management, customers, and vendors., • Excellent project and time management skills. Work Environment: • This position requires access to a cleanroom environment. In order to promote an environment with a low level of airborne environmental pollutants employees must at all times adhere to company procedures., • The cleanroom area is accessed via an air shower wearing an ESD lab coat and hair net Physical Demands: • The physical demands described here are representative of those that must be met with or without a reasonable accommodation by an employee to successfully perform the essential functions of this job., • While performing the duties of this job, the employee is regularly required to move product and equipment and to occasionally lift office products and supplies, up to 20 pounds. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the employee. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description K&A Power Group – is a privately held engineering firm delivering worldclass technical expertise and engineering excellence to power utility and industrial clients across the United States, Asia, the Middle East, and Africa. We provide comprehensive consulting, engineering and design, program and project management, construction management, and EPC services, specializing in substation, transmission, distribution, and distributed energy resources. We pride ourselves on attracting and developing top talent, building a culture of excellence, and building meaningful, long-term relationships with our employees, clients and communities, wherever they are in the world. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled [Position Name] to join our team at K&A Power Group in [Location]. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Field Support to Resolve Problems – Being Proactive, • Must do Reporting – Weekly Report, Monthly Reports, tracking of weekly PayId’s completed., • Monitor Schedule - Look Ahead vs. PM, • Attend the contractor’s Safety, Environment and Quality meetings; provide a tip in the onsite meeting., • Maintain and update as needed the onsite H&S, Environment and Quality project binder., • Be organized, and document all project progress to provide a good paper trail, • Review contractor invoices and schedules and provide feedback., • Conduct weekly project progress meeting. Request the contractor two week look ahead schedule at each weekly meeting., • Present onsite when work is being performed (make frequent observation of contractor’s activities)., • Immediate notification to PM of all problems or foreseeable issues throughout construction, or any complaint presented by the general public., • Coordinate Material delivery between Customer Stockroom, and Contractor., • Inspect all project related construction material for damage and completeness for the project execution., • Inspect work in progress to ensure that workmanship conforms to specifications, quality and adherence to construction schedules., • Facilitate resolving construction problems, discrepancies, procedures, and methods by working with engineering personnel, inspectors, contractors and suppliers. Must have strong communications skills., • Minimize Change Orders. Support Project Manager to review any requested Change, • Orders/Notices or other claims submitted by Construction Contractors which relate to additional payments, schedule adjustments or other modifications to the Project, and make such recommendations to the PM regarding the legitimacy of such claims and review the, • Construction Contractor’s proposed mitigation., • Review and understand the project documentation and any related documentation and provide input to enhance the constructability of the Project, taking into account schedule, cost and quality considerations., • Maintain a daily on-site as-build project plans., • Continuously communicate (written and verbally) with the associated PM., • Adhere to company policies, programs and procedures as well as Critical Infrastructure, • Protection (CIP). Ensure all requirements are maintained throughout the project execution, • Promote a proactive safety culture by encouraging open communication, reporting unsafe conditions, and suggesting improvements to safety practices., • Diligently ensure compliance with safety regulations, conducting safety inspections, and identifying potential hazards to mitigate risks and maintain a safe working environment for all personnel. What we’re looking for: • Minimum of five (5) years’ experience in progressive related electric utility industry experience, with transmission facilities construction management, • Two (2) years of college is preferred, • Construction Project Engineer Background Preferred, • Distribution line work experience required, • MS Suite Required – with high competency in MS Excel, • Knowledge of NRA clearances and switching orders would be beneficial, • Applicants should have the knowledge, experience and skills needed to review project plans, specifications, contract enforcement, and applicable technical standards, OSHA and other regulatory statutes., • Detailed work experience in electrical Utility transmission UV/OV & civil construction, • Must have current US Work authorization and valid US Driver License in good standing, • Minimum of 5 years of supervisory capacity experience, • Knowledge of GPS Systems & knowledge of SAP are preferred, • Ability to read and interpret specifications and drawings and convey interpretations to contractors, • Ability to investigate and solve construction problems in a timely manner with minimum dependence on others, • Computer and Administrative skills, • Strong verbal, written and interpersonal communication skills, • Must be able and willing to attend training in E-STAR/CONVEX (switching and tagging)., • Initiate distribution outage requests for project work through E-STAR and/or CONVEX. Pay Range $40—$46/an hour Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with company match), • Lifestyle Spending Account (LSA), • Paid Parental Leave after 12 months of employment, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program), • Parking and Transit Reimbursement, • Pet Insurance Check out our career page for more information! The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description On-Site, Hauppauge, NY Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Job Description We are seeking a highly motivated and technically strong Application Engineer to play a strategic technical role expanding and supporting the adoption of Narda Safety Test Solutions (Narda STS) product lines throughout the United States. Narda STS, based in Germany, is a global leader in RF test & measurement, EMF safety, spectrum monitoring, interference hunting, and EMC/EMI analysis. This position focuses on expanding Narda’s presence across key U.S. markets, including military and defense, government agencies, aerospace, telecommunications, and industrial customers. In this role you will act as the technical authority for Narda products in the U.S., providing end-to-end support, from pre-sales consulting and product demonstrations to application development and post-sales assistance. A critical part of this role includes collaborative technical engagement and brainstorming with customers, including military program offices, system integrators, and field engineers, to help identify mission requirements, design technical use cases, and propose innovative solutions using Narda STS equipment. Key Responsibilities Customer & Applications Engineering • Serve as the primary technical expert for Narda STS equipment including EMF meters, spectrum analyzers, RF interference detectors, RF direction finders, and spectrum monitoring systems., • Conduct product demonstrations for commercial, government, and U.S. military customers (onsite, virtual, and at trade shows)., • Work with customers to design test methods, solve operational challenges, and optimize their use of Narda products., • Engage in brainstorming sessions with defense and enterprise clients to develop application concepts, system configurations, and mission-specific use cases., • Provide Tier 1/Tier 2 technical support and coordinate with engineering teams in Germany for advanced issues., • Create and deliver training, application notes, usage guides, and technical presentations. Sales Engineering & Business Development • Support sales initiatives by identifying customer needs and recommending the proper Narda STS solution set., • Prepare customized proposals, technical quotes, and configuration packages., • Support federal and military acquisition processes including RFP/RFQ responses., • Build strong relationships with key accounts in the defense, aerospace, telecom, and industrial sectors., • Participate in field evaluations, pilot programs, and product qualification activities with military stakeholders. Market & Product Insight • Collect customer feedback to help guide new product features, development, and roadmap discussions with Narda STS headquarters., • Maintain expertise in RF measurement, EMF regulations, spectrum-monitoring practices, and military-relevant standards., • Track market trends and competitive products to support strategic planning. Travel Requirements • Frequent domestic travel for customer visits, demonstrations, training sessions, field support, and events., • Occasional travel to Germany for product training and technical alignment with Narda STS teams. Qualifications Required • Bachelor’s degree in Electrical Engineering, RF Engineering, Physics, Communications Engineering, or equivalent technical experience with RF systems., • 2+ years in RF test & measurement, spectrum analysis, EMC/EMI, or similar technical field., • Strong understanding of RF concepts (modulation, spectrum behavior, antennas, interference, propagation)., • Proven customer-facing experience in pre-sales engineering, applications support, system integration, or field engineering., • Ability to lead technical discussions and explain complex concepts clearly., • Active U.S. Government security clearance preferred; candidates must be eligible to obtain and maintain a government clearance. Preferred • Experience supporting U.S. military customers, defense contractors, or federal agencies., • Experience with Narda STS or comparable RF instrumentation (Keysight, Rohde & Schwarz, Anritsu, Wavecontrol, etc.). Personal Attributes • Strong technical curiosity and problem-solving abilities., • Comfortable brainstorming technical ideas and application scenarios with customers., • Self-starter with excellent organizational and communication skills., • Ability to work independently in a remote environment while coordinating across time zones. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. Salary Range for this position is $90,000- 120,000, depending on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Magnetics Design Engineer is responsible for the design and development of magnetic components, including transformers, inductors, and related assemblies, for high-reliability aerospace and defense applications. This role supports new business development through direct customer engagement, technical presentations, and specification definition, while also driving cost reduction and process improvements for existing products. Key Position Accountabilities: • Ensure implementation of Company safety, health and environmental programs for employees whose work is directed. Ensure that safe work practices are followed and the environment is fully protected in accordance with Company policy and governmental regulations., • Commitment to the Company’s policies, principles, and procedures and adheres to the Company’s procedures including Environmental, Health and Safety (EH&S), Equal Employment Opportunity (“EEO”), discipline/corrective action, and security., • Designs, tests, and magnetic components.(transformers, inductors, cores, windings.), • Communicates directly with customers to develop product specifications and technical assistance., • Make technical presentations for customers, reps, and sales organization., • Effectively communicates with customers and sales personnel in accurately defining customer requirements., • Supports product manufacturing transition and product maintenance at offshore manufacturing locations., • Uses experience to troubleshoot and resolve process and test issues., • Manages and expedites proto-type builds., • Assists QA Dept. with technical support for internal and external CARs., • Data Analysis., • Ability to analyze, organize and prioritize work while meeting multiple deadlines., • Advanced analytical, evaluative, and objective critical thinking skills., • Proven ability to design magnetic devices., • Knowledge of transformer material suppliers preferred. (cores, bobbins, laminations, cases, wire, etc.) Qualifications: • 2 - 5 years relavent work experience preferred., • Bachelor's Degree Preferred., • Any combination of education, training and experience listed above that demonstrates the ability to perform the duties of the position. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the employee. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Deep knowledge of electrical engineering principles and aerospace applications. Provide technical guidance and mentorship to junior engineers and cross‑functional teams. Bachelor’s degree in Engineering from an accredited college or university, with a focus in Electronics, Power Electronics, Dig

When you work at Goldfish, you're not just an employee.You're a part of something bigger.You're making an impact; a splash in the lives of the children in your community.You're moving forward a mission, you're saving lives! And you're making waves in your future, taking life lessons in and out of th

Operations Manager – College Hunks Hauling Junk & Moving.Paid Time Off, Health Insurance, 401(k) with Company Contribution.Live our four core values every day —.Creating a Fun, Enthusiastic Team Environment.Honest, Uniformed, Nice, Knowledgeable Service.To be the largest, most popular employer a

Y99000 General Electric Company seeks active military personnel for a transition opportunity in aerospace engineering. Responsibilities include leading projects, performing detailed analysis, and mentoring junior engineers. Candidates must have a Bachelor’s degree in Engineering and at least 8 yea

Job Title: Assistant General Manager – Aquatics. Helps the General Manager and department managers fulfill all daily tasks.

Embark on your journey as a Part-time Warehouse Associate, where you're at the heart of our operations.You'll not only handle the ebb and flow of products as they enter and leave the facility, but you'll dive into the world of inventory management for a leader in industrial distribution.This positio

The Warehouse Associate's primary function is to retrieve stock to fill customer orders, fulfill and process orders, accept incoming/outgoing shipments, and oversee the general organization of the warehouse.

As an Assistant General Manager, you'll lead an amazing team and a beloved neighborhood bakery-cafe to sweet success! You'll inspire and celebrate your team, partner with your General Manager in overseeing operations, delight guests every day, and grow the business- while taking ownership on hiring,

Our client in Melville Long Island NY is looking for hardworking, motivated talent to join their team.Clean and safe work environment.Working in a warehouse environment breaking down pallets.High School Diploma or GED, Must be able to read and write in English.Pass a drug screening and a background

The schedule for this position is Monday-Friday 5:00am-1:30pm.Schedules are subject to change based on business needs and may require overtime.Load, unload, stock tires and auto parts in a fast-paced warehouse environment using industrial vehicles such as a forklift or picker equipment.Use scanners

The primary function of this position is to support production and warehouse operations by safely moving, staging, and supplying materials to machine operators, assemblers, and other departments as needed to ensure efficient workflow and continuous production.Supply raw materials, components, and pa

Assisting line leaders/setup techs with general cleaning and whenever help is required. Training and compliance with general procedures and applicable company policies such as Good Hygiene Practice, current Good Manufacturing Practice (cGMP), and related Standard Operating Procedures (SOP). A Materi

Ferrellgas is looking for a Full Time Material Handler to join our team.In this role, you'll work primarily outdoors on our dockinspecting, filling, loading, and unloading propane cylinders and tanks for our delivery drivers and customers.This hands-on, physical position plays a key role in ensuring

Material Handler/Delivery Driver.We're Dealer Tire, a family-owned, international distributor of tires and parts established in 1918 in Cleveland, OH.We're laser focused on helping the world's largest and most trusted auto manufacturers grow their tire businessin fact, we've sold more than 60 millio

Our client, a leading organization in manufacturing, is seeking a Material Handler 1st Shift to join their team.As a Material Handler 1st Shift, you will be part of the production support team, assisting skilled production workers in maintaining smooth operations.The ideal candidate will demonstrate

Job Opportunity At Core & Main.Louis, Core & Main is a leader in advancing reliable infrastructure with local service, nationwide.As a specialty distributor with a focus on water, wastewater, storm drainage and fire protection products and related services, Core & Main provides solutions to municipa

Location: Onsite-Hauppauge, NY 11788 Duration: 3+ months contract Shift Timing: 1st shift is 7am 3:30pm OR 2nd Shift 3:30 PM Midnight.Job Description: Performs the physical and/or administrative tasks involved in the shipping, receiving, storing, distributing and order fulfillment of merchandise,

At Rheem, we engineer products for life. From engineers to accountants, sales professionals to support experts, Rheem depends on people to power our innovations. The job description above has been designed to indicate the general nature and level of work performed by employees within this classifica

Purpose: As a warehouse associate at Floor & Decor, you are the backbone of our retail location.Your key responsibilities will be compiling orders and replenishing and moving merchandise, whether it be on the sales floor or to a customer's vehicle.Your day will be spent checking inventory and orders

At Construction Resources and its affiliated companies, we are more than a distributorwe are a trusted partner to designers, builders, remodelers, and homeowners.For over 50 years, we've delivered integrated solutions that help turn ideas into reality across residential, multi-family, and commercial

At Raymour and Flanigan, you'll quickly learn that our core beliefs are about you! We believe that if we treat our associates well, they will treat our customers well.We will continually encourage you to think outside the box to raise the bar in our business, and we will do the same for you! That's

Warehouse And Forklift Operator.Long Island, NY who is a trusted provider of logistics and technical support solutions serving the aerospace, defense, and ground transportation industries.With more than 700 employees and long-standing customer partnerships, the company delivers scalable, reliable se

Our growing company is looking for enthusiastic talents to partner with our customers for all their printing and packaging needs!.With more than 250 years of experience, multiple production facilities, and investment in state-of-the-art technology with an emphasis on sustainability, Oliver Inc.We're

For over 40 years, we have built a reputation for delivering the highest quality products, outstanding service and product innovation.What sets LNK apart? We believe it is our employees.There is a commitment to quality in every department at LNK.As a member of our Packaging department you will be wo

Warehouse Order Fulfillment Specialist.Performs the physical and/or administrative tasks involved in the shipping, receiving, storing, distributing and order fulfillment of merchandise, products, materials, parts, supplies and equipment.Essential Duties and Responsibilities:.Performs quality checks

Responsibilities include assisting in leading HVAC projects for commercial, county, and industrial clients, developing and implementing project plans, schedules, and budgets, coordinating with architects, engineers, contractors, and clients, and overseeing the selection, procurement, and management

Town of Canton seeks an Assistant Project Engineer to assist in planning and execution of mass excavating and construction projects. Candidates should have an Associate Degree in Civil Engineering or equivalent experience.

The Warehouse Associate position involves working in a fast-paced warehouse environment focused on picking and packing pool supply products accurately and efficiently for shipment.Employees are responsible for selecting items based on order requirements, preparing them for shipment through proper pa

Responsibilities Manage crew and use equipment to perform line painting, asphalt crack filling and seal coating, power washing, epoxy flooring, and more Plan and facilitate the production of a high-quality project Communicate job status daily with the Operations Manager Maintain a safe, hazard-free

Responsibilities Support the team with a hands‑on leadership style Manage daily salon operations and uphold company standards Deliver and reinforce exceptional guest service Train, coach, and motivate team members Monitor sales results and implement strategies to increase revenue Maintain ac

Warehouse Associate Opportunity.People want to work at Capstone because of our high-performance culture.We build strong relationships, challenge the status quo, work hard to deliver results, and pay it forward in our communities.Through transparency and open lines of communication, we do the right t

We are growing our overnight team and looking for dependable, hard-working individuals to join us! This General Labor position is part of a team supporting large retail and commercial projects. Candidates with experience in general labor, construction, warehouse, installation, manufacturing, moving,