Government research jobs in Hempstead, New YorkCreate job alerts

Job Description Source One is a consulting services company and we’re currently looking for the following individual to work as a consultant with our direct client, a regional utility and energy client in Hicksville, NY. No Third-Party, No Corp to Corp, No Sponsorship Now or Future Title: Contract Analyst Location: Hicksville, NY Onsite (Mon-Fri, 40 hours) Contract Duration: 12 months, with likely extension Pay Rate: Up to $60.55 per hour (w2) This position will be remote or in-office as decided by our client - a candidate must be willing to work under both conditions. Responsibilities: The Contract Analyst is responsible for Contract Management and Procurement of services and materials consistent with the needs of our client's Procurement Group. Establishes and executes a strategy to source and manage storm and project contracts in compliance with our client's guidelines and federal regulations applicable to procurement using grant funds, such as those awarded by the Federal Emergency Management Agency (FEMA) (e.g., 2 CFR 200 et seq.). Work with a cross-functional team that involves Government Contracts and Capital projects. Develop, and implement RFPs, Purchase Orders, Contracts, Amendments, and Change Orders. Complete administrative tasks and projects related to Procurement and Contract Administration. Ensure accurate procurement planning, innovative sourcing, contract development, and contract administration while maintaining procurement policies and procedures compliance. Manage the day-to-day administration of Contracts, Purchase Orders, and Coordinate with Project Teams between Suppliers, Contractors, Consultants, and the Company. Additional responsibilities: Prequalify suppliers Conduct Pre-bid Meetings & Site Walk Promote cost savings Conduct market research and analysis Supplier Management/ Vendor Relations Supplier Diversity (MWBE & SDVOB) Monitor and expedite PO/Contract deliverables Monitor status via contact with customers and suppliers/contractors Identify opportunities for process improvement Additional most important attributes for candidates: Proven ability to issue RFPs, perform bid analytics and draft recommendations to award documents. Proven ability to negotiate contract terms/ amendments. Proven work experience in Executing FEMA Compliant Contracts. Advanced knowledge of Excel is essential and may be tested during the interview process (if selected for interview) Qualifications: Bachelor of Science in Business or a related degree Minimum of five years of relevant experience including with executing Construction Services Contracts. Excellent written and verbal communication skills; Working knowledge of SAP, Ariba and Power Advocate software experience is preferred. Strong negotiation, communication, organizational and team-building skills. Company DescriptionA WBENC (woman owned) certified company; Source One provides a full range of professionals to the Pharmaceutical & Healthcare, Defense, Technology, Financial Services, Retail & Manufacturing, and Energy & Transportation industries nationwide.A WBENC (woman owned) certified company; Source One provides a full range of professionals to the Pharmaceutical & Healthcare, Defense, Technology, Financial Services, Retail & Manufacturing, and Energy & Transportation industries nationwide.

Job Summary: The Contract Analyst is responsible for Contract Management and Procurement of services and materials consistent with the needs of Long Island Procurement Group. Establishes and executes a strategy to source and manage storm and project contracts in compliance with Long Island guidelines and federal regulations applicable to procurements using grant funds, such as those awarded by the Federal Emergency Management Agency (FEMA) (e.g., 2 CFR 200 et seq.). Work with a cross-functional team that engages Government Contracts and Capital projects. Develop, and implement RFPs, Purchase Orders, Contracts, Amendments, and Change Orders. Complete administrative tasks and projects related to Procurement and Contract Administration. Ensure accurate procurement planning, innovative sourcing, contract development, and contract administration while maintaining procurement policies and procedures compliance. Manage the day-to-day administration of Contracts, Purchase Orders, and Coordinate with Project Teams between Suppliers, Contractors, Consultants, and the Company. Additional responsibilities: Pre-qualify suppliers Conduct Pre-bid Meetings and Site Walk Promote cost savings Conduct market research and analysis Supplier Management/ Vendor Relations Supplier Diversity (MWBE and SDVOB) Monitor and expedite PO/Contract deliverables Monitor status via contact with customers and suppliers/contractors Identify opportunities for process improvement. Additional most important attributes for candidates: Proven ability to issue RFPs, perform bid analytics and draft recommendations to award documents. Proven ability to negotiate contract terms/ amendments. Proven work experience in Executing FEMA Compliant Contracts.Advanced knowledge of Excel is essential and may be tested during the interview process (if selected for interview) Qualifications: Working knowledge of SAP, Ariba and Power Advocate software experience is preferred. Bachelor of Science in Business or a related degree Minimum of five years of relevant experience including with executing Construction Services Contracts. Excellent written and verbal communication skills; Strong negotiation, communication, organizational and team-building skills. SAP, contract, construction, supplier management, Capital Projects

NYC or Uniondale, NY This Jobot Job is hosted by: Colleen Gormley Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $150,000 - $225,000 per year A bit about us: Our client is a full-service law firm that has been serving clients since 1850, offering competitive salary, excellent benefits package, and a collaborative, friendly environment. Why join us? Competitive salary Excellent benefits package Collaborative, friendly environment Flexible work schedule Generous PTO Job Details Job details: Conduct internal corporate and government investigations. Defend and litigate lawsuits involving employment-related claims and agency charges. Defend against wage and hour matters, including collective and class actions. Advise, counsel, and train employers on employment and labor law issues. Represent employers in court, before administrative agencies, mediations, and arbitrations. Assist in collective bargaining negotiations with labor unions. Defend unfair labor practice filings at the NLRB and improper practice charges at PERB. Advise clients on FMLA, ADA, ADEA, NYS Civil Service Law, and religious accommodation requests. Requirements: Juris Doctor (J.D.) degree from an accredited law school. Admission to the New York Bar (or eligibility for prompt admission). Minimum of 3–5 years of labor and employment law experience. Demonstrated experience handling investigations and litigation. Strong legal research, writing, and oral advocacy skills. Ability to manage multiple matters simultaneously and exercise sound judgment. Commitment to client service and the highest ethical standards. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Hybrid Remote Associate Attorney - Civil Defense! This Jobot Job is hosted by: Sharon Brown Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $150,000 - $200,000 per year A bit about us: Our top-tier, multi-state law firm is seeking a talented and experienced Civil Litigation Defense Attorney to join our dynamic team. This is an incredible opportunity for a seasoned professional to make a significant impact in a well-established firm, handling complex civil litigation defense cases. This role offers a competitive compensation package and an engaging work environment that promotes professional development and growth. Why join us? • Hybrid remote, • Great billable hours, • Friendly team, • Exciting cases, • Great mentorship and collaboration, • Reputable firm Job Details What You'll Do In This Growth Role: 1. Representing and advising clients in courts, before government agencies, and in private legal matters., 2. Conducting legal research and gathering evidence to formulate defense strategies., 3. Preparing and drafting legal documents such as pleadings, discovery, motions, briefs, contracts, and other legal documents., 4. Interpreting laws, rulings, and regulations for individuals and businesses., 5. Presenting and summarizing cases to judges and juries., 6. Evaluating findings and developing strategies and arguments in preparation for presentation of cases., 7. Negotiating settlements of civil disputes., 8. Supervising legal assistants and paralegals, and working collaboratively with the legal team., 9. Maintaining knowledge of current legislation, court decisions, and industry trends to ensure the firm's compliance and competitive position. Qualifications: 1. A Juris Doctorate from an accredited law school., 2. Admission to the state bar and in good standing., 3. A minimum of 5 years of experience in civil litigation defense, commercial litigation, and corporate law., 4. Proven track record of effectively handling complex legal matters and achieving favorable outcomes., 5. Exceptional legal research and writing skills., 6. Excellent negotiation and communication skills., 7. Proficient in legal research tools and software., 8. Demonstrated ability to work independently and collaboratively in a fast-paced, high-pressure environment., 9. Strong analytical and problem-solving skills, with a keen attention to detail., 10. Experience managing legal assistants and paralegals., 11. Knowledge of legal liability and principles of risk management. If you are passionate about civil litigation defense and eager to take on challenging cases that make a real difference to our clients, we would love to hear from you. Join our team and contribute to our reputation for excellence in the legal industry. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

JOB TITLE: Quality Improvement Specialist LOCATION: Onsite in the office in Jericho, NY or Albany, NY PAY: $36.06 - $38.46/hr SHIFT: Monday-Friday, 40 hours a week DUTIES: • Recruit and engage health care providers, community-based organizations, faith-based organizations, community centers, human service agencies, political leaders, business leaders, media, consultants, educational institutions and Medicare beneficiaries in collaborative partnerships to identify opportunities to improve patient outcomes related to quality and efficiency., • Establish and facilitate learning and action networks using in person meetings, teleconferences, and webinars., • Provide technical assistance to healthcare providers on root cause analysis research methods to define opportunities to improve outcomes of care and avoid harms, including CMS and local data analysis, Medicare beneficiary focus groups, and provider and community stakeholder input., • Develop and continually refine methods for working with health care providers to implement effective and timely interventions that improve performance and patient outcomes., • Manage groups of providers by monitoring clinical outcomes and quality improvement measures to demonstrate sustainment of initiatives., • Provide ongoing technical assistance and onsite consultation to providers for all aspects of performance improvement targeting improvement in care coordination, cross-setting communication, and patient/caregiver self-management skills., • Monitor closely the progress of provider intervention efforts and maintain a tracking system for the adopted interventions., • Ensure internal reports and required CMS documentation are completed and submitted on time., • Present results of interventions through meetings with internal and external customers (i.e., CMS, Providers, IPRO management and staff) and through large group presentations at conferences and meetings, as requested., • Assess the quality improvement training and information needs of clinicians, administrative, and ancillary staff and coordinate appropriate educational efforts for these individuals and groups., • Work closely with the data analysts in the design of reports required to monitor provider and department performance, making necessary adjustments in interventions and plans in response to findings., • Attend and participate in regional conferences, department meetings and professional education meetings., • Participates as an active member of HCQIP team and works to ensure that the department meets all the defined goals and deliverables in assigned contract(s)., • Accepts new responsibilities in response to changing department needs. QUALIFICATIONS: • Superior communication skills (verbal and written) with the ability to communicate quality improvement data and methods to health care providers and community stakeholders with varying technical and clinical backgrounds., • Knowledge of the principles and practices of health care quality improvement and community organizing. Experience with quality improvement research techniques and knowledge of disparities in the care of underserved populations., • Strong interpersonal skills with a proven record of developing productive relationships with health care provider staff, consumers and stakeholders., • Strong time management skills with the ability to multi-task and meet multiple deadlines., • Proven record of success in promoting improvement in community health quality and efficiency., • Ability to work independently with minimal supervision, as well as in a team environment., • Travel as required to conduct various quality improvement intervention meetings, participate in regional conferences, attend project specific educational and/or collaboration meetings, and meetings with government agencies as required., • Computer proficiency with a developed knowledge of Microsoft applications (Word, Excel, PowerPoint and Smartsheet)., • Ability to provide formal and informal presentations to internal staff and external customers. EDUCATION & EXPERIENCE: • Bachelor’s degree in education, nursing, public administration, public policy, public health or degree in related healthcare field, or RN with Associate’s degree required., • A minimum of two (2) years of experience in health care quality improvement, required. PREFERRED SKILLS: Certified Professional in Healthcare Quality (CPHQ) or other quality certification, preferred.

$20 - $60/hourpayadvanced word skillsadvanced pdf toolspolicy analysisregulatory compliancedocument drafting and reviewprofessional written communicationverbal communicationproject managementattention to detailstrategic consultationmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Job Title: Policy Consultant Job Type: Contractor Location: Remote Job Summary: In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. Key Responsibilities: • Analyze, draft, and review policy documents, legal contracts, proposals, and research papers using advanced Word and PDF skills., • Provide strategic consultation and actionable recommendations on regulatory, legal, healthcare, academic, or finance-related matters., • Conduct thorough document reviews, ensuring compliance, clarity, and adherence to industry best practices., • Support clients with precise document formatting, tracked changes, form filling, and data extraction., • Collaborate with cross-functional teams to synthesize complex data into succinct, actionable policies and procedures., • Stay abreast of evolving regulations and guidelines relevant to your field of expertise., • Communicate findings and recommendations in clear, compelling written and verbal formats. Required Skills and Qualifications: • Minimum 3+ years of professional experience in government policy operations., • Advanced proficiency with Word and PDF tools, including tracked changes, formatting, document review, and data extraction., • Exceptional communication skills, with a strong emphasis on clear, professional written and verbal interactions., • Demonstrated expertise in drafting, analyzing, and reviewing complex policy or regulatory documents., • Proven ability to manage multiple projects and meet stringent deadlines in a fast-paced remote environment., • Keen attention to detail and commitment to delivering high-quality work. Preferred Qualifications: • Experience working with Fortune 500 clients or on high-profile regulatory, legal, or policy projects., • Track record of collaborating with multidisciplinary teams to achieve impactful outcomes.

Job Description Description Forchelli Deegan Terrana LLP (FDT) is seeking a full-time, on-site, Traditional Labor Law Attorney. Located in Uniondale, New York, the Labor Law Attorney will handle labor and employment matters, including advising clients on compliance with labor regulations, negotiating collective bargaining agreements, drafting employment agreements, and representing clients in labor disputes in courts, before government agencies and in the collective bargaining arena. The position requires conducting legal research, preparing legal documents, attending hearings and collaborating with clients to develop effective legal strategies. We are seeking someone with 8 years+ experience in areas including Collective Bargaining, Labor Relations, NLRA and RLA issues, and Management/Union arbitrations, as well as, Fair Labor Standards Act, ERISA and work place discrimination matters. Company Description Forchelli Deegan Terrana LLP (FDT), established in 1976, is a prestigious full-service law firm based in Uniondale, NY, serving clients in Nassau and Suffolk Counties from its location at The Omni. One of the largest firms on Long Island, with over 80 attorneys, the firm provides counsel to a diverse range of national, regional, and local businesses, real estate developers, supermarkets, financial institutions, municipalities, and other organizations. FDT is renowned for its innovative, client-centered approach and offers services across nearly all business-related practice areas, including Employment & Labor and Litigation. The Labor & Employment Law Departments are nationally recognized for its experienced attorneys who provide practical legal counsel with a commitment to achieving excellent results in complex legal and business matters. We represent management in all aspects of Labor & Employment Law, litigation, business relations and business transactions. Qualifications • 8+ years of experience in Labor Law, Labor Law Regulations and Employment Law, including familiarity with compliance and collective bargaining processes;, • Skills in Legal Research, Drafting Legal Documents, and Litigation;, • Strong communication, negotiation, and advisory skills;, • Attention to detail, problem-solving capability, and the ability to manage multiple cases simultaneously;, • Licensed to practice law in New York State;, • Experience representing clients in labor and employment disputes before federal and state courts, NLRB, NMB, EEOC, State Divisions of Human Rights and State and Federal Departments of Labor;, • Portable business a plus, but not required. Salary Range $175,000 to $250,000+ depending on experience and portable business.

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionFinal compensation will be based on a combination of:· Relevant work experience· Education· Project size · Project location· Required working hours· Candidate subject matter expertise and/or specialty · Ability to be approved by agencies/owners as required· Final salary determination is negotiable Come bridge the gap between you and your career goals! Recently ranked as a best U.S. construction workplace by Fortune Magazine, MLJ Contracting is driven by passion and built on trust. When you work at MLJ, you work for a company that values your well-being, your talent, and your career aspirations. If you are looking for a fulfilling career, come join our family and turn big ideas into even bigger realities. As a premier general contractor in the heavy construction market, MLJ Contracting successfully performs major public works projects for client agencies across the New York city area and is now bringing its expertise to the New England region as part of its continued growth. Proud of our quality workmanship and engaging projects, we always maintain the highest standards of safety and professionalism. Want to build a career that stands the test of time? Join MLJ and lay the foundation for a better future The Estimator works both independently and collaboratively with executive management and project teams to estimate project costs for firm fixed-price bids, proposals, and change orders. The Estimator leverages field experience, industry knowledge, and solid analytical skills to prepare accurate scope of work and quantity take-offs. Fundamental to this role is the ability to understand scope of work, make sound assumptions and identify gaps in construction documents. II. EDUCATION/CERTIFICATIONS • College degree in Engineering, Construction Management or other related field (or equivalent years' experience). III. KEY RESPONSIBILITIES • Responsible for all aspects of Estimating process, • Conduct thorough analysis of drawings, specifications and any other document from the agency, ensuring required information is provided., • Perform detailed project cost estimates by analyzing plans, specifications and performing quantity take-offs for select trades, • Research selected products from a cost and constructability perspective., • Solicit sub-contractor pricing and bids for different trades in preparation of cost estimate and manage the subcontractor RFP process., • Qualify and level subcontractors' proposals according to project specifications., • Itemize trade specific scopes and prepare bid packages., • Review progress and construction documents for constructability. Lead and participate in discussion regarding alternate detail and materials for specific areas or trades., • Provide and present value engineering options and costs., • Maintain discretion and confidentiality at all times., • Provide and present estimating productions and scheduling., • Coordinate administrative staff in sending documents to vendors., • Interact with clients, architects, engineers and Local Jurisdictions to understand and incorporate project objectives, schedules, permits, costs, etc., • Perform any other ad-hoc duties assigned. IV. QUALIFICATIONS OF THE POSITION • Minimum of 3 years of construction estimating experience. Preferred with government agencies as MTA, DDC, PANYNJ, DOT, DEP, etc., • Strong verbal, written communication and organization skills, • Highly proficient in selected software (Excel, Word, Outlook) HCSS Heavy Bid estimating software and P6 a plus., • Ability to make decisions, work independently and coordinate estimating colleagues., • Ability to meet critical project deadlines, willingness to coordinate and work as a team member. #ZR Salary Range:$100,000—$155,000 USD

Job Description The Quality Engineer will evaluate and/or appraise supplier's manufacturing capabilities to baseline their processes for conformance to various documented commodity checklists, and/or QMS special processes. Establishes part quality evaluation plans from materials requests through material receipt (full life-cycle). Provides resolution and disposition of non-conformance materials to ensure adequate corrective action. • The Quality Engineer is highly supplier-focused, requiring excellent interpersonal and communication skills (oral and written) to manage supplier quality assurance responsibilities and ensure compliance across and at all levels of the organization on major programs from design through production stages., • Evaluation of manufacturing functions and processes to ensure Quality Standards are in place, • Evaluation of inspection and testing processes, mechanisms and equipment; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications., • Participate in QMS Audits for process deficiency and correction., • Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements., • Interact in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality., • Involved in lean and six-sigma quality engineering methodologies., • Will have 'hands-on' knowledge and experience of mechanical (Machine Shop) components, assembly, subsystem and system level concepts., • Strong emphasis on RCCA and CAPA experience., • Understanding of FMEA and Process Improvements and Standardization of Processes Required Skills: • Minimum 3-5 years with LEAN Manufacturing Application experience., • 3-5 years' experience in areas of Quality Engineering such as: FMEA, SPC, RCCA, Process Control, Product Evaluation and Auditing, • 2-3 years' working knowledge and experience with ISO9100 and AS9100 QMS Processes, especially in Production and Quality Engineering, • 2-3 years' working knowledge and experience with Aircraft Parts and Material Conformity Inspections, • 3-5 years FAI experience with AS9102 (FAI) Protocol, • 3-5 years' knowledge and experience with inspection methods, techniques and protocols., • 3-5 years' experience in understanding and the application of Engineering Mechanical Processes, Standard Drawings Conventions, Interpreting Drawing Specifications (ANSI 14.5) and GD&T, • 3-5 years' experience in understanding and the application of Electronic Assembly Process and Inspection, Standard Conventions (IPC-610, J-Std-1000), Interpreting Schematic Diagrams and Specifications, • Airframe experience required, • AVMS electronic experience required, • Strong English verbal and written communication skills, • Reliable transportation must have current/active drivers' license, • Valid drivers license and auto insurance required, • US citizenship required - Trigo ADR Americas can restrict hiring to US Citizens when government contracts require us to do so. 8 U.S.C. § 1324b(a)(2)(C). Required Education (including certifications): • In lieu of a Degree, 6+ years of hands-on experience as a Quality Engineering in an Aerospace Manufacturing Environment, • High School or GED Preferred Education and Skills (including certifications): • Bachelor's degree is preferred from an accredited college in technical discipline (e.g., Industrial Engineering, Mechanical Engineering, Quality Management), • Proficient with Microsoft Office Products (Excel, Outlook, PowerPoint, Word), • Compatible certifications or related college courses, • Team-minded, communicative, proactive, stress-resistant, assertive, • Strong interpersonal communication and problem-solving skills WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Benefits: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Pay Range: $34 to $42 hourly, please note that the salary information is a general guideline only. Trigo considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Company DescriptionTRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications. TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans. NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.\r\n\r\nThank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.\r\n\r\nTRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.\r\n\r\nNOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,

Job DescriptionRequisition: 82433 PSEG Company: PSEG Long Island Salary Range: $ 65,400 - $ 116,200 Work Location Category: Hybrid Flexible We’re one of the country’s largest energy companies, with a vision of powering a future where people use energy more efficiently and it’s safer and delivered more reliably than ever. We’re also deeply connected to the communities we serve, with more than 13,000 employees working together to support our customers and make a difference every day. Here, you’ll have the stability and exciting opportunities that come with being a Fortune 500 company — along with a supportive, friendly work environment where your contributions are valued. We know life isn’t one-size-fits-all, and neither is work. That’s why we offer flexible work options depending on the role. In support of this model, roles have been categorized into one of three work location categories: • Onsite – roles where employees are expected to be onsite daily., • Hybrid fixed – roles that are a mix of remote work and onsite work fixed days each week., • Hybrid flexible – roles that are a mix of remote work and onsite work, but the onsite requirements have greater flexibility. (i.e. 5-8 days a month vs. set days each week).As an employee, if you are regularly scheduled to work 20 or more hours per week, you will have access to a wide range of comprehensive benefits designed to support your total well-being: medical, dental, vision, paternal leave and family leave programs, behavioral health programs, 401(k) with company match, life insurance, tuition reimbursement, and generous paid time off. More than 13,000 people already call PSEG their work home, taking pride in providing safe, reliable service to millions of customers. If you’re looking for a place where you can build a meaningful career and help power and support our communities, we’d love to welcome you to the team. PSEG is not offering visa sponsorship for this position. Job SummaryWorking with the SAP Security team, you will deliver SAP Security application support for a large, complex portfolio of SAP applications. Provides technical knowledge, thought leadership, and consultative support to the business client, IT management, developers and staff in risk assessments, architecture reviews, audits, configuration design, implementation and operational aspects of information security plans, procedures and products with a focus on the SAP environments including ECC, CRM, Business Warehouse, NetWeaver, GRC and other SAP based applications. This includes responsibility for the SAP systems and ensuring proper security support, and problem resolution input for the SAP applications. Job Responsibilities • Develop and maintain SAP security management and architecture practices across multiple SAP environments in addition to providing solution recommendations., • Advocate for exploring and leveraging standard solutions first., • Ensure compliance with government and corporate security/audit guidelines., • Administer and execute preventive security maintenance programs, oversee problem management, perform root cause analysis and corrective action plans, and administer and report on security SLAs., • Maintain SAP user management and security framework across multiple SAP environments in addition to providing solution recommendations., • Ensure compliance with government and corporate security guidelines including Segregation of Duties (SoD), Sarbanes-Oxley (SOX) as appropriate, and Privacy related standards., • Implementation and ongoing maintenance of SAP security policies, processes, GRC, architecture, training, and communications., • Support the efforts to develop security build plans (security technology, operations, and management) to support the construction of the security architecture, ensuring that it meets the requirements and adhere to the related software guidelines., • May collaborate with IT Management, Legal, Safety and Security, Cyber Security and Law Enforcement agencies to address identified security vulnerabilities., • Create, manage and maintain user security awareness., • Conduct security research in keeping abreast of latest security issues., • Train and/or mentor other team members, peers and clients as appropriate. Job Specific Qualifications: • Bachelor’s degree in computer science or a related technical field, i.e. STEM., • SAP experience., • Knowledge of SAP Security design, administration and configuration for finance suite of products., • Strong analytical skills., • Relevant technical acumen or experience in computer programming, development, application support and/or coding., • Demonstrated leadership capabilities through projects or other work planning experiences., • Knowledge of Finance, Accounting, and Procurement functions and relevant applications with possible technology alternatives., • Ability to maintain strong client care relationships with integrity and follow through., • Self-starter with the demonstrated ability to quickly learn new technical concepts., • High Level Access background check required., • 24 X 7 callout availability required., • Department of Energy’s regulation 10 CFR 810 is required. Desired:, • Technical/software certification such as AWS certification, etc., • Understanding of and experience in IT project management methodologies, requirement management, quality assurance and IT processes., • Understanding of basic financial principles including experience with project financial budgeting and planning., • Project Management Professional Certification (PMP)., • Graduate degree., • Experience with ITIL & CMMI.

Job Description Quality Inspector - Garden City, New York If you have AS9100 Aerospace experience that would be highly desirable or work in a manufacturing facility that involves machining products About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • High school graduate, • 3-5 Years mechanical inspection, aerospace experience desirable but not a dealbreaker, • Post high school education in math, engineering, inspection techniques or related fields a plus SUMMARY OF POSITION Responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Good communication skills, able to read and follow the Client’s work instructions and quality procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions, • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment, • Prepare and maintain inspection reports, • Program and/or operate Coordinate Measuring Machine, • Perform Hardness testing, • Collect and tabulate data for SPC use, • Review Supplier F.A.I.R./Generate First Article Reports per AS9102, • Other duties as directed by the management QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Basic computer knowledge including MS Excel and Word, • Interpret drawing requirements/specs and geometric dimensions and tolerances, • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards, • PCDMIS programming skills, • Familiar with special process specifications for heat treat, welding, and non-destructive testing EQUIPMENT USED • Vernier calipers, • Micrometers, • Height Gauges, • CMM machines, • Other standard measuring tools/instruments, • Please note, all Production Floor employees are required to wear steel toe boots. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is a hourly role paying about $27 an hour but also has up to 20 hours of OT that sometimes goes into double time for certain days. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionKelly Science is seeking an Analytical R&D Chemist for a growing company located in Farmingdale, NY. This is a 3-6 month contract to start, there may be potential for an extension or to be hired on permanently. Although that is not guaranteed at this time. Pay: $42/hour Shift: Monday-Friday 7:00am-3:30pm Employment Type: 3-6 month contract Summary: The Research Chemist will play an integral role in the team by using knowledge in skills in developing new quality procedures, perform method validation and method optimization, testing wide range of products and reporting results, training fellow team members, providing status updates to the supervisor and/or laboratory manager. Job Duties Include: • Develop, validate, and optimize analytical methods., • Improve and redesign test procedures for new and existing products., • Perform sample testing and product analysis using wet chemistry and instruments (e.g., TLC, UV/Vis, FTIR, HPLC, ICP, ICPMS, GC, GCMS)., • Support laboratory operations through reagent preparation and glassware management., • Stay informed on industry trends and recommend R&D strategies., • Complete special assignments as needed., • Manage multiple tasks efficiently and meet deadlines, both independently and with a team., • Communicate results clearly and utilize diverse research sources. Qualifications: • Master's degree in Chemistry or a related scientific field., • 5+ years of relevant industry experience. Must have experience with routine testing AND analytical method development/optimization utilizing HPLC, ICP, ICPMS, GC, and/or GCMS., • Previous experience with nutraceuticals is a plus Interested? Please apply today for immediate consideration! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Why Kelly® Science & Clinical? Kelly Science & Clinical is your connection to premier scientific and clinical companies looking to hire industry experts just like you. Our team creates expert talent solutions to solve the world’s most critical challenges. Every day, we match science professionals with dream jobs that fit their skills, interests, and career goals-it’s the way we think job searching should be. Nearly 100 percent of our science recruiters have a professional background and education in science, so we know a thing or two about the science market and how to get your expertise noticed. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description FP& A Analyst – Garden City, New York - About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. (We highly prefer manufacturing background with a facility that deals with the US Government). All items in bold are requirements; if you do not have these then you will not be selected for a phone screen. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in Accounting or Finance, • Professional Certifications: CPA or Master’s degree preferred, • Experience: Minimum 5+ years financial reporting, budgeting, forecasting, and accounting, highly desire working within a manufacturing environment; thorough knowledge of business finance, financial analysis and modeling; 3-5 years of leadership / management experience; public company experience preferred; M&A experience preferred SUMMARY OF POSITION The FP&A Analyst conducts analyses and provides financial insights that support optimal business decision making across the business unit. Reporting to the DVP Business Unit Controller, he/she provides financial consulting and strategic support to senior management, including financial presentations, capital expenditure analyses, assessments of new business opportunities, acquisition analyses, and other projects as requested. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Coordinate the consolidation and reporting of business unit financial performance. Review consolidated financial information provided by Business Units for accuracy; identify and analyze significant variances to budget, forecast, and prior year. Communicate reported information to the Business Unit Manager and Business Unit Controller., • Analyze trend data in key performance indicators including Revenue, cost of sales, gross profit margin, expenses and working capital. Communicate findings and areas for improvement to senior management across the business unit., • Assist in quarterly SOX control test procedures as assigned; ensure SOX requirements are met at the Business Unit level., • Provide support to facilities with closings, forecasting, reporting, and analysis as needed, • Oversee and manage continued development of modeling tools for budgeting, financial forecasting, operational planning using best practices, • Implement and work with business intelligence tools and dashboard reports., • Prepare evaluations and financial data for capital investments and business improvement projects in accordance with Corporate guidelines, • Oversee the planning and coordination of the consolidated annual budget process for the business unit in accordance with Corporate guidelines., • Assist in the preparation of presentations to the Division and Executive Office QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Compliance: Understanding of US GAAP and SOX 404 requirements, • Applications: Proficient with MS Office Suite, notably Excel (including pivot tables) and PowerPoint; working knowledge of ERP platforms (SAP, Oracle, Business Central); proficient with financial consolidation reporting tools (HFM) and data analytics tools (Power BI), • Skills: Excellent communication across all levels of the organization (Business Units, Division, Corporate); ability to present confidently to Executive and/or Senior Divisional Leadership Team; ability to meet strict deadlines and work independently. TRAVEL • 10%-20%; business unit site visits, operational reviews, etc. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $130,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

ICON is a global healthcare intelligence and clinical research organisation united by a mission to bring new medicines and treatments to patients faster. ICON plc is a world-leading clinical research organization. We offer advanced clinical research by providing outsourced services to pharmaceutical, biotechnology, medical device and government and public health organizations. With our patients at the center of all that we do, we help to accelerate the development of drugs and devices that save lives and improve quality of life. Our people are our greatest strength, are at the core of our culture, and the driving force behind our success. ICON people have a mission to succeed and a passion that ensures what we do, we do well. We are currently seeking a Kit QC Inspector in Farmingdale, New York. The Kit QC Inspector opportunity is a full-time role with excellent healthcare benefits, 401k matching, and generous PTO. As a Kit QC Inspector at ICON, you will play a vital role in ensuring the quality of clinical trial kits used in research studies. You will be responsible for inspecting and verifying kit components, maintaining detailed records, and ensuring compliance with regulatory and quality standards, contributing to the integrity of our clinical operations. • Ensure the quality and correctness of all visit kits distributed to investigator sites., • Inspect all visit kits according to SOPs prior to packing and transfer to the shipping department., • Perform quality control of all visit kits as required by the SOPs., • Ensure all errors are corrected & logged appropriately and inform the QC supervisor of any issues or delays., • Achieve daily/weekly departmental Quota assigned., • High school diploma or equivalent; associate degree in a related field preferred., • 1+ years of experience in quality control, inspection, or a related role., • Basic computer skills including knowledge in MS Outlook, of MS Word, Excel and typing skills., • Strong attention to detail and organizational skills, with the ability to identify and resolve quality issues effectively., • Excellent communication and teamwork abilities, with a commitment to maintaining high-quality standards., • Availability to work Monday through Friday, 9 am to 5 30 pm at Farmingdale, NY on site., • We are looking for people located in Long Island or Queens. Hourly rate: $23.50/hr. USD Employment with ICON is contingent upon having the legal right to work in the country where the role is based. ICON offers a competitive and comprehensive total rewards package designed to support your health, wellbeing, and career development. • Competitive base salary and performance related incentives, • Health and wellbeing programmes including medical, dental, and vision coverage where applicable, • Retirement and pension plans, • Life assurance and disability coverage, • Employee assistance programmes and wellbeing resources, • Learning and development opportunities through structured training and career pathways Benefits may vary depending on role and location. ICON is an equal opportunity employer. We are committed to building an inclusive and accessible workplace where everyone feels valued and supported. If you require reasonable accommodations during the recruitment process, please let us know or submit a request here. Salary Range $38,728.00-$48,410.00

At Vast, our mission is to contribute to a future where billions of people are living and thriving in space. Vast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. Using an incremental, hardware-rich and low-cost approach, Vast is rapidly developing its multi-module Haven Station. Haven Demo’s 2025 success made Vast the only operational commercial space station company to fly and operate its own spacecraft. Next, Haven-1 is expected to become the world’s first commercial space station when it launches, followed by additional Haven modules to enable permanent human presence by 2030. Our team is all-in, committed to executing our mission safely and on time. If you want to work with the most talented people on Earth furthering space exploration for humanity, come join us. Technical Sourcer II (Fixed Term) Reporting to the Manager of Talent Sourcing, this role supports the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. You’ll be at the forefront of identifying and engaging the engineers who will design, build, and launch the next generation of human-rated space systems. This role offers a unique opportunity to deepen your technical recruiting expertise, partner closely with hiring teams, and influence how we attract world-class talent in one of the most ambitious industries on Earth. This will be a full-time, 6 month fixed-term position located in our Long Beach location. Responsibilities Develop and execute targeted sourcing strategies to identify top technical talent across a variety of engineering disciplines Build and maintain robust pipelines of passive and active candidates to support current and future hiring needs Engage prospective candidates through thoughtful outreach, sharing Vast’s mission and inspiring interest in our work Conduct initial candidate screens and exploratory conversations to assess technical alignment, experience, and motivation Partner closely with recruiters and hiring managers to understand role requirements and translate them into effective sourcing plans Track and manage candidate activity to ensure a high-quality, consistent talent pipeline Minimum Qualifications 3+ years of proven experience as a technical sourcer or a similar talent acquisition role Preferred Skills & Experience Bachelor’s Degree or equivalent Experience with Greenhouse Demonstrated ability to source candidates with niche areas of expertise Self-directed with a high sense of urgency while maintaining a meticulous attention to detail Strong customer service mindset Excellent communicator and problem solver Ability to be flexible, adaptable, and maintain unwavering poise under pressure Highly organized with a knack for building relationships Pay Range Technical Sourcer II: $42 - $61 Senior Technical Sourcer: $55 - $79 Compensation and Benefits Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Salary is just one component of our comprehensive compensation package. Full-time employees also receive company equity, as well as access to a full suite of compelling benefits and perks, including 100% medical, dental, and vision coverage for employees and dependents, generous paid time off; up to 20+ days of vacation for exempt staff and up to 10+ days of vacation for non-exempt staff with the ability to cash-out unused vacation annually, paid parental leave, short and long-term disability insurance, life insurance, access to a 401(k) retirement plan, ClassPass credits, personalized mental healthcare through Spring Health, and other discounts and perks. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high-quality meals for employees. U.S. Export Control Compliance Status The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. This status includes U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Vast is an Equal Opportunity Employer; employment with Vast is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. #J-18808-Ljbffr

The Grants Management Analyst-Pre Award works with the Lead Grants Management Analyst and AVP Clinical Research to coordinate all pre-award grant activity. They serve as a trusted research admin professional within Research Intelligence Office of Sponsored Research and the Northwell community, accepting workflow assignments and providing a high level of service in preparing grant proposals for timely submission. This position requires unwavering commitment to service and excellence in a demanding, deadline-driven environment. This position serves as a liaison between investigators and staff to meet proposal objectives and submission deadlines, using a variety of communications methods. Adaptability and flexibility to accommodate ongoing changes to internal and external policies and regulations; facilitating short lead times on proposal or project deliverables; balancing conflicting priorities; and contributing and adjusting to a continuously evolving environment are vital. • Proposal Development & Pre-Award Support, • Provide pre-award administrative assistance, guidance, and oversight to investigators and administrators seeking external funding for clinical research and other related sponsored projects through the complex process of proposal preparation and submission., • Review and submit proposals in a timely manner and ensure submissions are completed accurately and according to sponsor deadlines, in accordance with federal and state laws, sponsor guidelines, and Northwell policies and procedures governing sponsored clinical research., • Provide direction, training, and assistance to investigators and administrators in proposal development, including advising on budget structure, allowable costs, and sponsor requirements., • Review and validate proposal budgets prepared by investigators or departmental staff to ensure compliance with sponsor and Northwell policies and procedures and, when appropriate, provide more detailed support for complex or strategic proposals., • Guide investigators in the development of new or revised project budgets, including just-in-time submissions, ensuring project-appropriate costs and use of current fringe benefit and facilities/administrative rates., • Obtain all necessary clearances and authorizations prior to submission, including required training mandates and disclosures., • Sponsor Compliance & Regulatory Oversight, • Serve as the primary source of expertise to ensure that proposals meet sponsor requirements and applicable regulatory compliance standards., • Review terms and conditions on proposal solicitations and award documents as appropriate., • Collaborate with appropriate managerial staff on exceptions to Northwell policies, including program matching commitments and facilities and administrative rates., • Keep abreast of federal and state laws, regulations, sponsor guidelines, and institutional policies governing the administration of clinical research grants and cooperative agreements., • Analyze and interpret complex information from multiple sources, including funding opportunity announcements, sponsor submission procedures, and sponsor electronic research administration systems., • Sponsor & Institutional Liaison Activities, • Serve as liaison between Principal Investigators and sponsors and represent Northwell within the scope of authority in negotiations related to sponsored research commitments, including just-in-time budget adjustments., • Collaborate with other institutional officials to negotiate terms for interdisciplinary, complex, and non-standard proposals., • Partner with other OSR staff to facilitate agreements including subcontracts, clinical trials, and state agreements to ensure conformity with Northwell policies., • Administer grant transfers into the institution and coordinate with incoming investigators and other Northwell offices., • Operational Support & Process Improvement, • Contribute to the workflow, business processes, and policy improvements within the Office of Sponsored Research., • Share responsibility and provide input to OSR committees regarding website content and communication strategies, including OSR bulletins., • Assist with data collection, reporting, and institutional metrics related to sponsored research activity., • Provide coverage and back-up administrative support to other members of the team., • Training, Professional Development & Institutional Engagement, • Assist in training new pre-award staff and develop or present training materials to OSR staff and the Northwell research community., • Serve as a member of the team supporting training and adoption of the Huron Grants module., • Attend workshops, professional development programs, and conferences to maintain and enhance grant administration expertise and stay current with evolving sponsor submission requirements., • Other Duties, • Perform other duties as assigned. Job Qualification • Bachelor's Degree required, or equivalent combination of education and related experience., • 1-3 years of relevant experience, required. HIGHLY PREFERRED • Experience using electronic pre- and post-award systems such as Grants.gov, NIH ASSIST, Research.gov, Grants Solutions, Huron, InfoEd, Cayuse., • Experience developing, reviewing or analyzing grant budgets., • Experience managing grant application processes., • Experience interpreting and applying policies from multiple levels of authority (federal, state, and institutional)., • Customer service experience supporting faculty or investigators., • Experience with pre- and/or post-award administration in a government, non-profit, helthcare and/or academic setting., • Completed SRA and/or NCURA professional development workshops/classes. Additional Salary Detail The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining a team member's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, service line, years of relevant experience, education, credentials, negotiated contracts, budget and internal equity).

At Vast, our mission is to contribute to a future where billions of people are living and thriving in space. Vast is developing next-generation space stations to ensure a continuous human presence in space for America and its allies, enabling advanced microgravity research and manufacturing, and unlocking a new space economy for government, corporate, and private customers. Using an incremental, hardware-rich and low-cost approach, Vast is rapidly developing its multi-module Haven Station. Haven Demo’s 2025 success made Vast the only operational commercial space station company to fly and operate its own spacecraft. Next, Haven-1 is expected to become the world’s first commercial space station when it launches, followed by additional Haven modules to enable permanent human presence by 2030. Our team is all-in, committed to executing our mission safely and on time. If you want to work with the most talented people on Earth furthering space exploration for humanity, come join us. Vast is looking for a Mechanical Engineer I, Avionics , reporting to the Senior Manager of Avionics Mechanical Engineering to support the development of the systems that will be required for the design and build of artificial‑gravity human‑rated space stations. This will be a full‑time , exempt position located in our Long Beach location. Responsibilities Design avionics enclosure and mounting solutions for high reliability in harsh environments, with an emphasis on batteries and crew interfacing components. Participate in the entire design cycle of flight and mission critical avionics. Partner with the electrical engineering team to design rugged printed circuit board systems. Complete thermal and structural analyses of these designs. Support electronics development and trade studies, and create interface definition, specification, and control documents. Validate requirements through design, test, analysis, or inspection. Plan and conduct tests, review and interpret data. Create assembly and/or installation drawings and support hardware builds. Minimum Qualifications Bachelors of Science degree in mechanical engineering, aerospace engineering, or other engineering discipline completed or expected by June 2026. 1+ years of project or internship experience with electronics packaging and/or critical electronic components in extreme environments. 1+ years of project or internship experience with 3D CAD programs. Preferred Skills & Experience Masters of science degree in mechanical engineering, aerospace engineering, or other engineering discipline completed or expected by June 2026 Working experience with NX preferred. 1+ years of experience with GD&T implementation and analysis (ASME Y14.5) Experience with electronics packaging and/or critical electronic components in extreme environments. Thermal and structural analysis experience using ANSYS or similar. Familiarity with environmental testing similar to SMC-S-016, and/or MIL-STD-810. Additional Requirements Willingness to work evenings and/or weekends to support critical mission milestones Ability to lift up to 25 lbs unassisted. Pay Range: California $86,000 — $122,000 USD Compensation and Benefits Base salary will vary depending on job‑related knowledge, education, skills, experience, business needs, and market demand. Salary is just one component of our comprehensive compensation package. Full‑time employees also receive company equity, as well as access to a full suite of compelling benefits and perks, including: 100% medical, dental, and vision coverage for employees and dependents, generous paid time off; up to 20+ days of vacation for exempt staff and up to 10+ days of vacation for non‑exempt staff with the ability to cash‑out unused vacation annually, paid parental leave, short and long‑term disability insurance, life insurance, access to a 401(k) retirement plan, ClassPass credits, personalized mental healthcare through Spring Health, and other discounts and perks. We also take pride in offering exceptional food perks, with snacks, drip coffee & onsite barista, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast’s ongoing commitment to providing high‑quality meals for employees. U.S. Export Control Compliance Status The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. This status includes U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. Equal Opportunity Vast is an Equal Opportunity Employer; employment with Vast is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. #J-18808-Ljbffr

Job Description Summary: Parabit is a U.S.-based global leader in Security, Self-Service, and Customer Experience solutions, proudly innovating for over 30 years. We design and manufacture scalable, high-quality products and services that help clients optimize operations and elevate customer engagement. Our long-standing client relationships-spanning banking, aviation, transit, retail, hospitality, healthcare, education, and government-are a testament to our reliability and results-driven approach. From consulting and design to prototyping, engineering, manufacturing, integration, and technical support, Parabit delivers end-to-end solutions tailored to each client's needs. Learn more at www.parabit.com or contact us at recruiting@parabit.com. Role: Strategic Relationship Manager Location: Hybrid (Bellmore, NY for 30-90 days, then remote) Type: Full-Time We're seeking a dynamic Strategic Relationship Manager to drive growth through strong partnerships with architects & engineers (A&E), integrators, distributors, and end users. This role blends strategy, relationship-building, and client-facing engagement to expand Parabit's market presence. Responsibilities • Develop and nurture strategic relationships across key partner segments, • Define scopes of work and coordinate on-site client meetings, • Represent Parabit at trade shows and industry events, • Deliver compelling presentations to prospective clients, • Collaborate cross-functionally with internal teams to ensure client success, • Maintain responsive, transparent communication with all stakeholders Qualifications • Proven experience in strategic planning and market research, • Strong interpersonal, networking, and customer service skills, • Natural relationship builder with a consultative approach, • Excellent written and verbal communication, • Comfortable working independently and within cross-functional teams, • Familiarity with PC systems, networking, and embedded technologies Ready to Make an Impact? If you're passionate about building meaningful partnerships and driving innovation, we'd love to hear from you. Apply today or reach out at recruiting@parabit.com. All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies. Most research studies are conducted remotely at home, though some may be in-person.

Thank you for checking us out! Work From Home Data Entry Research Panelist Jobs - Part Time, Full Time This is a remote work from home position perfect for those with any type of work background such as administrative assistant, data entry clerk, typing, customer service representative, drivers etc.

DataAnnotation is committed to creating high-quality AI.Join our team to help train the next generation of AI while enjoying the flexibility of remote work and the freedom to set your own schedule.This role is designed to fit a variety of lifestyles — whether you're looking to contribute part-t

Part Time Administrative Assistant.The Part Time Administrative Assistant will provide support to the administrative team by performing a variety of administrative and HR related tasks.This position will work closely with the Office Manager and other members of the management team at our Syosset loc

Executive Administrative Assistant.HealthCare Partners, IPA and HealthCare Partners, MSO together comprise our health care delivery system providing enhanced quality care to our members, providers and health plan partners.Active since 1996, HealthCare Partners (HCP) is the largest physician-owned an

Administrative Assistant- Legal Department.Administrative Assistant for our Legal Dept to join our team in our Garden City, NY office.This is a full-time, in-office position, Monday through Friday.The Legal Administrative Assistant provides administrative and operational support to the Legal Departm

Performs diversified clerical duties related to the operational needs of the office/department.Performs diversified clerical duties which may include, but are not limited to: Typing various correspondence, reports, articles; Greeting and directing visitors; Answering telephones, taking messages, dir

Location: Hicksville, NY (Onsite Preferred) Division: NC Custom A Division of Nassau Candy Reports To: CEO, NC Custom a division of Nassau Candy.Founded in 1918, Nassau Candy is a leading manufacturer, importer, and distributor of specialty confections, fine foods, and promotional products.NC Custo

Administrative Assistant at The Learning Experience will assist with the marketing, financial and operational performance of the school.They have an ability to apply their business acumen to customer engagement and leading people, ultimately creating an environment where others can thrive.BUSINESS O

Multi-state commercial insurance carrier is seeking a qualified Administrative Assistant for a position based in their Long Beach, NY office.This is an entry-level position which will support the Claims Operations Team as well as the Claims Examiners.The ideal applicant will be a motivated individua

Assists with event and meeting coordination, database entry, conducting basic internet research, maintaining information for various websites, and communication with project stakeholders.

Per Diem Administrative Assistant.Responsible for providing support to the Care Management and Denials Management Departments functions and staff, include the clerical support for Care Managers and Social Workers in facilitating patient's transitions to the next level of care.We are looking for a Pe

Administrative Assistant, School of Medicine.Hofstra University is nationally ranked and recognized as Long Island's largest private university located in Hempstead, N.When you work at Hofstra, you join a team of talented professionals committed to preparing students for the challenges of tomorrow,

Prioritizes and manages multiple projects simultaneously; solicits, researches, and compiles supporting materials for projects; follows through on issues in a timely manner.

Francis Hospital, The Heart Center is New York State's only specialty designated cardiac center.A member of Catholic Health, St.Francis is consistently recognized by U.News & World Report as a national leader for Cardiology & Heart Surgery, as well as for Gastroenterology & GI Surgery.Francis as hig

DataAnnotation is committed to creating high-quality AI.Enjoy the flexibility of remote work and the freedom to set your own schedule.This is an opportunity to work with us as an independent contractor.We're currently expanding into an exciting new area – teaching AI Assistant models to be a more

PromptCare is seeking an Administrative Assistant to join our team in the Respiratory department.The ideal candidate will be responsible for providing administrative support to the Respiratory team and other departments with multiple responsibilities throughout the day ensuring the smooth running of

File Clerk/General Administrative Assistant.Falcon Rappaport & Berkman, LLP is a rapidly growing, multi-practice firm.We are currently seeking a full-time file clerk/general administrative assistant for our Rockville Centre office to assist in the day to day organization and administration of the of

The candidate for the Administrative Assistant should be organized and familiar with Microsoft Excel and Microsoft Word.They would work closely with their team, the field staff, and the project management staff.They should be capable of completing and understanding routine tasks, developing, and man

The Administrative Assistant at Ventura Aviation is vital in supporting the daily operations of our Maintenance, Repair, and Overhaul (MRO) facility.This position ensures the seamless coordination of administrative tasks, facilitating communication between departments, maintaining accurate records,

This position supports the administrative, public and student facing operations of the Speech, Language and Hearing Center.The schedule for this position requires weekday evenings and Saturday hours, September through May.Hours are modified June through August.Primarily on-site required, with limite

DataAnnotation is committed to creating high-quality AI.Join our team to help train the nextgeneration of AI while enjoying the flexibility of remote work and the freedom to set your ownschedule.This role is designed to fit a variety of lifestyles — whether you’re looking tocontribute part-time