Trabajos inspector en Springfield, New JerseyCrear alertas

Sysco is Now Urgently Hiring Diesel Fleet Techs Lvl. III in Northampton, PA! Earn $28.17 - $42.21 per Hour* Plus a $600 Annual Tool Allowance \n Comprehensive Benefits Package\n We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. \n Want a Career with Sysco? Sysco is Urgently Hiring - Apply Now!\n Benefits:\n\n • Earn $28.17 - $42.21 per hour*\n, • $2.00 shift differential for 2nd shift\n, • $600 annual tool allowance\n, • Annual boot allowance\n, • Paid vacation and holidays\n, • Ongoing job skills and leadership development training\n, • Career growth opportunities – we promote from within!\n, • Comprehensive healthcare benefits\n, • Move your career FORWARD with Sysco Foods!\n\n (*Based on experience and certifications) \n Shift:\n\n • 2nd or 3rd shift available\n\n Want a Career with Sysco? Complete the Form and Apply Today!\n Responsibilities:\n\n • Perform required inspections and preventive maintenance on vehicles and equipment within planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet\n, • Perform FAI/CVI (annual) inspections on all fleet vehicles, including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state, and local legal and regulatory agencies (includes all state-required inspections and frequencies)\n, • Perform quality preventive maintenance inspections per company methods on all fleet vehicles, including tractors, trailers, converter dollies, refrigeration units (reefer), lift-gates, light-duty vehicles, and any other company-owned equipment\n, • Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles, including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment\n, • Perform preventive maintenance, diagnosis, and repair to refrigeration units (reefer)\n, • Address all Driver Vehicle Inspection Report write-ups timely and efficiently\n, • Diagnose cause of any malfunction and perform repairs to manufacturer specifications, including but not limited to engines, transmissions, and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems, and lift-gate hydraulic, mechanical, and electrical systems\n, • Follow procedures, including documenting all work performed on work orders\n, • Mentor, teach, and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility\n, • May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible\n, • Proficient in electrical meter testing\n, • Knowledge of controls and electrical systems (DC, low-voltage)\n, • Electric motor knowledge (DC)\n, • Complete electrical repairs and welding projects as needed\n\n Qualifi cations:\n\n • Education\n, • High school diploma or GED\n, • Current and valid driver's license (CDL preferred, not required)\n, • Experience\n, • Medium/heavy-duty truck technical training\n, • 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair\n, • Certifications, Licenses, and Registrations\n, • Annual Inspector Certification knowledge, skills, and abilities\n, • Brake Inspector Certification knowledge, skills, and abilities\n, • ASE certifications; automotive or medium/heavy duty trucks\n, • EPA section 608 (Core & Type II) and 609 HVAC & Refrigeration Certification\n\n Sysco is an Equal Opportunity Employer: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or other characteristics protected by law. \n (*The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine the rate of pay include specific skills, work location, work experience, and other individualized factors)

Join Our Team as an Industrial Hygienist! Are you ready to elevate your career with a dynamic and growing firm that values your contributions and offers exciting opportunities for advancement? Hillmann Consulting, LLC, a leading nationwide environmental consulting firm, is seeking a passionate and driven Industrial Hygienist to join our team in the North Jersey and NYC areas. Why Hillmann Consulting? At Hillmann, we believe in fostering a collaborative, team-oriented environment where your career can thrive. With over 40 years of experience, we specialize in Environmental Health and Safety, Remediation Support, Real Estate Due Diligence, Geotechnical, and Laboratory Analysis services. Our work spans from emergency planning for major disasters to ensuring compliance with federal and state regulations, including OSHA, DOT, and USEPA. Visit the Life tab on our LinkedIn profile to learn more about life at Hillmann. What We Offer: • Career Growth: We empower you to drive your own career path with continuous learning and professional development opportunities., • Exciting Projects: Work on a variety of impactful projects, from disaster response to environmental assessments, in both local and nationwide contexts., • Comprehensive Benefits: Competitive salary, medical, dental, and vision insurance, employer-401(k) plan, tuition assistance, and volunteer time. Who We’re Looking For: A motivated individual who thrives in a fast-paced environment and adapts well to change. You should possess excellent organizational skills and a strong commitment to customer service and safety. Candidates must be able to work with minimal supervision, learn quickly, and possess excellent problem-solving skills. Qualifications: Education: • Associate’s, Bachelor’s, Master’s, or equivalent degree in a Science-related field. Experience: • 1 to 4 years in the industry, with a focus on asbestos, lead, indoor air quality, and mold/moisture inspections. Skills: • Excellent communication, • Client management, • Proficiency in Microsoft Office and Excel. Certifications: • Lead: Inspector/Assessor or Sampling Technician preferred., • Additional certifications like CHMM, 40 Hour HAZWOPER, 10/30 Hour Construction Safety, and CIE/CMI are desirable but not required. Other Requirements: • Mastery of the English language – written and spoken., • Valid driver’s license., • Reliable transportation., • Ability to frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 50 pounds., • Ability to occasionally work at heights greater than 6 feet (examples: ladders, rooftops, man-lifts, scaffolding)., • Ability to occasionally work in confined spaces (examples: crawlspaces, attics)., • Ability to frequently reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl., • Must be able to walk up/down multiple flights of stairs., • Ability to complete all mandatory trainings, including safety training., • Availability for off-hour emergency work., • Respond as a member of the Hillmann 24-hour disaster response team. *We welcome candidates with initial asbestos AHERA certifications eligible for state certification tests. Responsibilities: • Maintain certifications and licenses., • Respond to client emergencies as needed., • Conduct thorough investigations related to Industrial Hygiene, including indoor air quality, mold/moisture inspections, asbestos surveys, and lead-based paint inspections., • Develop remediation plans, report findings, and ensure compliance with industry guidelines., • Collect air samples during asbestos abatement work to verify compliance with local, state and Federal regulations including background, daily and clearance air monitoring; accurately completing project records, log books and chain of custody forms; and timely submission of samples and required project documentation., • Perform air and bulk sampling according to EPA, OSHA, NIOSH, and industry analytical methods., • Perform limited asbestos containing material surveys., • Perform employee exposure monitoring for various environmental hazards., • Perform other responsibilities as assigned. At Hillmann Consulting, LLC, we are committed to your professional development and well-being. Join us and make a difference with a company dedicated to excellence and innovation in environmental consulting. Ready to Apply? Submit your application today and take the next step in your career with Hillmann Consulting, LLC. We look forward to welcoming you to our team! Hillmann Consulting, LLC is an equal opportunity employer.

Join Our Team as an Asbestos Project Manager / DEP Asbestos Investigator! Are you ready to elevate your career with a dynamic and growing firm that values your contributions and offers exciting opportunities for advancement? Hillmann Consulting, LLC, a leading nationwide environmental consulting firm, is seeking a passionate and driven Asbestos Project Manager / DEP Asbestos Investigator to join our team in the NYC area. Why Hillmann Consulting? At Hillmann, we believe in fostering a collaborative, team-oriented environment where your career can thrive. With almost 40 years of experience, we specialize in Environmental Health and Safety, Remediation Support, Real Estate Due Diligence, Geotechnical, and Laboratory Analysis services. Our work spans from emergency planning for major disasters to ensuring compliance with federal and state regulations, including OSHA, DOT, and USEPA. Visit the Life tab on our LinkedIn profile to learn more about life at Hillmann. What We Offer: • Career Growth: We empower you to drive your own career path with continuous learning and professional development opportunities., • Exciting Projects: Work on a variety of impactful projects, from disaster response to environmental assessments, in both local and nationwide contexts., • Comprehensive Benefits: Competitive salary, medical, dental, and vision insurance, employer-401(k) plan, tuition assistance, and volunteer time. Who We’re Looking For: A motivated individual who thrives in a fast-paced environment and adapts well to change. You should possess excellent organizational skills and a strong commitment to customer service and safety. Candidates must be able to work with minimal supervision, learn quickly, and possess excellent problem-solving skills. Qualifications: Education: • College degree in a Science-related field preferred, but not required. Experience: • 2 to 5 years in the industry Skills: • Excellent communication, • Attention to detail, • Strong knowledge of regulations, • Thoroughness, • Critical thinking, • Client management, • Proficiency in Microsoft Office and Excel. Certifications: • Asbestos: Current NYC DEP Asbestos Investigator license, • Current NYSDOL Asbestos Inspector Certification, • Additional certifications like CHMM, 40 Hour HAZWOPER, 10/30 Hour Construction Safety, and CIE/CMI are desirable but not required. Other Requirements: • Mastery of the English language – written and spoken., • Ability to read and interpret construction drawings to assess project scope and identify affected asbestos-containing materials., • Valid driver’s license., • Reliable transportation., • Ability to frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 50 pounds., • Ability to occasionally work at heights greater than 6 feet (examples: ladders, rooftops, man-lifts, scaffolding)., • Ability to occasionally work in confined spaces (examples: crawlspaces, attics)., • Ability to frequently reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl., • Must be able to walk up/down multiple flights of stairs., • Ability to complete all mandatory trainings, including safety training., • Availability for off-hour emergency work., • Respond as a member of the Hillmann 24-hour disaster response team. Responsibilities: • Conduct investigations, develop remediation plans, and report findings and results in accordance with regulations and applicable industry guidelines, • Collect air samples during asbestos abatement work to verify compliance with local, state and Federal regulations including background, daily and clearance air monitoring; accurately completing project records, log books and chain of custody forms; and timely submission of samples and required project documentation., • Perform air and bulk sampling according to EPA, OSHA, NIOSH, and industry analytical methods, • Perform comprehensive asbestos containing material surveys, • Perform employee exposure monitoring for various environmental hazards, • Generate remediation scope of work plans based on inspections, • Obtain and maintain applicable certifications and licenses, • Respond to client emergencies during normal business and off-peak hours as necessary, • Respond as a member of the Hillmann 24-hour disaster response team and on call schedule At Hillmann Consulting, LLC, we are committed to your professional development and well-being. Join us and make a difference with a company dedicated to excellence and innovation in environmental consulting. Ready to Apply? Submit your application today and take the next step in your career with Hillmann Consulting, LLC. We look forward to welcoming you to our team! Hillmann Consulting, LLC is an equal opportunity employer.

An EWR (Newark Liberty International Airport) building or construction inspector monitors terminal, facility, and infrastructure projects to ensure compliance with safety codes, blueprints, and port/aviation standards. Core Responsibilities • Site Inspections: Monitor active construction,-reno, or trade work (building,-fire,-plumbing, or-electrical) for code and contract compliance., • Plan Review: Read and interpret blueprints, architectural drawings, and construction safety phasing plans., • Documentation: Prepare daily narratives, inspection logs, discrepancy reports, and material tracking records., • Coordination: Work with contractors, resident engineers, and airport facility personnel to resolve non-compliance or safety hazards., • Safety & Security Compliance: Enforce site safety rules and maintain required airfield access. Typical Requirements & Qualifications • Experience: Multi-year background (often 5–10+ years) in construction inspection, civil engineering, or a specific subcode trade (electrical, plumbing, fire, or structural)., • Airport/Security Access: Ability to pass background checks and obtain a SIDA badge (Security Identification Display Area)., • Certifications: Uniform Construction Code (UCC) subcode/inspector licenses or ICC (International Code Council) certifications depending on the specific municipal/authority jurisdiction., • Physical/Shift Flexibility: Ability to climb ladders, inspect tight/high spaces, and occasionally work night or weekend shifts tied to airport construction windows., • Driver’s License: NY or NJ

Job Description Junior Petroleum Inspector Company Overview Camin Cargo is a leading provider of inspection, testing, and certification services in the oil and gas industry. We are committed to ensuring the highest standards of safety, quality, and compliance for our clients worldwide. We are seeking an energetic Junior Petroleum Inspector to join our team and contribute to the success and growth of the organization. Position Summary The Junior Petroleum Inspector is responsible for conducting inspections and tests of various petroleum products to ensure compliance with industry standards and regulations. This role plays a crucial part in maintaining product quality and safety throughout our operations. This entry-level position provides a valuable opportunity for individuals looking to start their career in the oil and gas sector. Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. • Under supervision, responsible for measuring, gauging, and recording temperatures of various materials in shore tanks, as well as collecting samples from barges., • Conduct field calculations in accordance with company guidelines and American Petroleum Institute (API) standards., • Collect, label, and deliver samples to the laboratory promptly, in line with job requirements., • Document inspection findings and prepare comprehensive reports for management review., • Evaluate equipment, processes, and safety measures to ensure compliance with industry standards and regulatory requirements., • Collaborate with the inspector trainer to identify opportunities for improvement and implement strategies to mitigate risks., • All other job duties as defined. Minimum Requirements • High School Diploma or equivalent., • Basic understanding of safety regulations and quality control processes in petroleum operations., • Strong math comprehension skills and attention to detail., • Excellent communication and interpersonal skills with the ability to collaborate effectively with customers., • Ability to work independently and as part of a team., • Willingness to work in various outdoor environments and adhere to safety protocols. Fitness for Duty – Physical Demands • Workday may consist of 8-12 hours., • Ability to work in outdoor environments, often in varying weather conditions., • Ability to lift and carry up to 50 pounds., • Frequent walking, climbing, and standing for extended periods., • Candidates must be able to pass a Fit for Duty test, ensuring they are physically capable of performing job duties in a safe and efficient manner., • Use of personal protective equipment (PPE) as required., • All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Job Description Join a Leader in Precision Engineering Valcor Engineering is a trusted name in aerospace, nuclear, and defense sectors. As one of the largest providers of fluid control products, our legacy is built on precision, reliability, and innovation. We're currently looking for a Mechanical Inspector to join our quality team. If you have a mechanical mindset, strong attention to detail, and enjoy working in a hands-on environment—this is the role for you! Under general supervision, the Inspector position requires the mechanical ability to perform first piece and sample inspection. Using standard inspection equipment, solves standard inspection problems and lays out of complicated parts, casting, and assemblies. Makes decisions concerning minor inspection problems, using complicated blueprints and specifications. JOB SUMMARY Under limited supervision, performs the inspection of the most complex parts and assemblies. Inspector A requires the mechanical ability and experience to perform inspections of simple electrical, complex mechanical, pneumatic and hydraulic components and assemblies. In addition, they perform complicated layout inspection for the first piece, in process and final inspection. Inspector A makes decisions regarding inspection problems and skillfully uses all inspection gauges and instruments, including their set up, analysis and adjustment. ESSENTIAL FUNCTIONS • Performs required inspections of complex parts and assemblies using complicated blueprints, sketches, written and/or verbal specifications., • Documents inspection results and makes decisions regarding inspection problems., • Skillfully uses all inspection gauges and instruments, including their set up, analysis and adjustment., • Calibrates measuring gauges and equipment as directed., • May lead and assist other inspectors and make set ups for their use., • Moves parts and materials to and from work area., • Works closely with Engineering, Assembly/Test and Operations to resolve quality issues., • May be Level I Operator or Level II Inspector in one or more of the following areas: liquid penetrant, utlars-sonic or eddy currents., • Must pass required eye tests and will be subject to the random drug and alcohol testing program., • Required to follow company policies (Safety, Attendance etc), • Maintains a clean well organized work area., • Interact with organizational team members and other departments in a professional manner., • Performs other duties as assigned by management. MINIMUM QUALIFICATIONS • Requires a high school diploma or equivalent, advanced technical education preferred., • Requires five years’ experience as an inspector with demonstrated acceptable performance of the required inspection operations., • Demonstrated effective verbal and written communication skills. REQUISITE SKILLS REQUIRED • Works from complicated blueprints, sketches, written and/or verbal specifications., • Requires the use of standard shop math, including trigonometry and geometry, and a full knowledge of machine shop and assembly operations., • Understanding of basic electronics, pneumatics and hydraulics EQUIPIMENT/MACHINERY USED Experience in using basic and advanced inspection tools and gauges, plus experience with CMM and other currently used inspection equipment. PHYSICAL REQUIREMENTS Lifting up to 50lbs regularly and 75lbs occasionally, pushing, pulling, standing for long periods of time, manual dexterity, visual acuity, and typing. Why Join Valcor Engineering? • Cutting-Edge Projects: Be part of critical work in aerospace, defense, and energy., • Team-Focused Culture: Work with a skilled, collaborative group of industry pros., • Career Growth: Opportunities to develop and move up in a growing company., • Comprehensive Benefits: Competitive pay, healthcare, 401(k), paid time off, and more. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Quality Control Inspector Performs inspections on all molded and incoming material. Checks bill of materials on all outgoing orders. High School Education required Fluency in English and Spanish Computer skills – Word, Excel Need to use calipers and other measurement equipment. Must be able to read drawings

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. POSITION PURPOSE This position will be responsible for providing inspection and technical program support for equipment inspection, test, and repair portions of the overall Mechanical Integrity/Quality Assurance effort. The role will primarily focus on the Red Lion (Delaware City, DE) and Morses Mill (Linden, NJ) facilities while also being integrated and part of the Nexpera Technology Center, which provides support to all Nexpera sites. The role will reside at Red Lion (Delaware City, DE) PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Develop/Authorize/Maintain and implement standardized inspection plans for all PSM Critical Equipment, including pressure vessels, process vessels, heat exchangers, piping, storage tanks, and other equipment., • Perform equipment inspection in accordance with API 510, API653and API 570 guidelines and regulations., • Complete post inspection reports and provide recommendations and/or modifications for immediate concerns and future consideration., • Develop, implement and document repair plans for fixed equipment, • Perform field contract administration duties during field repairs of equipment, • Standardize, organize, and maintain required documentation (design bases, inspection plans, inspection reports, etc.) in accordance with corporate and site MIQA best practices., • Update SAP and equipment files with equipment history, Inspection Plans., • Ensure that all inspections and tests are performed in accordance with the original equipment design basis and in alignment with recognized and accepted good engineering practice (RAGAGEP)., • Ensure that all repairs to fixed PSM Critical Equipment is documented in accordance with OSHA 1970.119, • Evaluate the fitness-for-service of all fixed PSM Critical Equipment and assist other Technical/Maintenance resources in properly developing and documenting any repairs to return the equipment service., • Perform necessary calculations required within the RAGAGEP to determine the minimum allowable thickness of pressure vessels, piping, and tanks in PSM Critical service., • Provide functional guidance to Veolia and contract NDE Examiners, • Evaluate results of various non-destructive inspections on process equipment and provide recommendations based on those inspection results, • Act as an Authorized Inspector for PSM Critical pressure vessel, piping, and storage tank inspections and tests, as well as for approval of all alterations to PSM Critical pressure vessels, piping, and storage tanks., • Manage & Implement the Corrosion Monitoring program PSAIM® for the sites, • Coordinate contract NDE inspections and perform Field Contract Administrator responsibilities, • Develop Quality Assurance Plans for fabrication of new equipment (ex. tanks, pressure vessels, piping, etc.), • Perform/coordinate QA inspections of new equipment on site and at shop locations., • Estimate equipment remaining life per the applicable RAGAGEP., • Maintaining the site Owners User Manual as applicable. Qualifications In order to be qualified for this role, the following is required: • 3 plus years work experience within high hazardous chemical processing or oil refining industries or similar industries, • At least 2 out of 3 of the following certifications: API 510, API 570, API 653, • Able to travel ~40% per year, • Working knowledge of Process Safety Management (PSM), • Ability to obtain any missing API certification (API 510, API 570, API 653) within 2 years of employment, • Comprehensive working knowledge of API 510, 570, 653, 579, 580, ASME B31.1, B31.3, Section V, VIII, IX, NBIC, NACE SP0294 requirements governing inspection & tests, fitness for service, and repair of process piping, pressure vessels, and tanks, • Ability to develop and implement inspection plans for piping, pressure vessels, and storage tanks., • Ability to develop, implement, and analyze repair procedures for fixed equipment., • Thorough knowledge of non-destructive examination techniques, including UT, VT, RVT, RT, MT, Eddy Current, IRIS, Shear Wave, etc. Level II certifications a plus, • Knowledge of welding practices and procedures, • Ability to perform confined space entry, • Excellent interpersonal skills, coupled with superior oral and written communication skills, enabling ability to influence all levels of personnel., • Demonstrated proficiency with MS Office, • Prioritization and organizing capabilities, • Disciplined in functioning in a self-directed work environment, • Be extremely detail oriented with excellent written and communication skills, • Current and valid driver’s license, • Currently have or able to obtain a Transportation Worker Identification Card (TWIC) Physical Requirements/Work Environment • Willing and able to work in a High Hazard environment; outdoors, indoors, elevated heights and confined spaces, • Willing and able to wear required PPE (personal protective equipment) such as steel toes, hardhat, protective eyewear, sir supplies and cartridge respirator, etc., • Willing and able to climb stairs, ladders, stand, walk, stoop, bend, kneel, crawl, visual acuity for close work, able to reach overhead, able to hear and respond to alarms., • Successful candidates must be able to perform the essential functions of the job with or without accommodation. BENEFITS NEXPERA's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionCompany Description We’re excited to share that the Electrical & Electronics (E&E) business of Eurofins is now part of UL Solutions. E&E has built a strong reputation for technical expertise, quality, and trusted service across the electrical and electronics industry. Combining the teams, capabilities, and shared commitment to safety and innovation presents an exciting opportunity to strengthen E&E services and support customers around the world. This role offers a unique opportunity to join the business during an exciting period of growth and transition. Job Description Electrical Factory Inspector (Remote/Travel) responsibilities include, but are not limited to, the following: • Support department objectives and company goals, • Be a team player, • Sustain a positive, enthusiastic and professional attitude at all times, • Accommodate requests with a smile and “let me see what I can do” attitude, • Adhere to manager directives, • Maintain a professional appearance and demeanor, • Arrive on time, properly dressed and prepared to work, • Perform all duties in a timely, accurate, honest and professional manner, • Communicate with customers professionally and in accordance with customer service standards, • Be respectful to others Primary Tasks/Responsibilities: • Surveillance inspections of factories to assure products remain in compliance with conditions of granted certification., • Other duties assigned by management.Qualifications Basic Minimum Education Qualifications: • Two-year college degree or four-year college degree required Basic Minimum Qualifications: • Knowledge of electronics, • Certification in Electronics, ideal but not required, • Willing to travel - This position requires 90% - 100% travel, • Able to rent a car, • Willing to work overtime and remote, • Cannot be on any no fly list, • Clean driver record, • Authorization to work in the United States indefinitely without restriction or sponsorship. The Ideal Candidates Possesses the Following: • Ability to maintain confidentially, • Needs to be receptive to and accepting guidance from others, • Ability to deal with difficult people and problems, • Able to work well in a team environment, • Able to work in a diverse group of people, • Attention to detail, • Ability to multi-task and prioritize assignments, • Professional appearance Physical Qualifications: • Able to sit or stand for long periods of time, • Able to lift up to 30 pounds Additional Information Position is full-time travel & hybrid, working Monday - Friday 8:00 am to 5:00 pm, with overtime as needed. • Compensation: $50,000 - $70,000, • Excellent full-time benefits including comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays Eurofins USA Consumer Product Testing is a Disabled and Veteran Equal Employment Opportunity employer.

Job Description About Company: Kundlas Consulting Group LLC is a professional consulting firm specializing in construction inspection and compliance services for public infrastructure projects. Our core services include on-site inspection of roadway, bridge, and utility construction to ensure adherence to engineering specifications, safety standards, and contract requirements. We support clients with daily reporting, materials testing coordination, schedule tracking, and quality assurance oversight. Additional services include project management, grants management for federally funded infrastructure and disaster recovery programs. About the Role The Structural Steel Inspector will inspect structural steel members and fabricated steel components used in MTA/NYCT construction projects. This role requires experience with structural steel fabrication, welding inspection, non-destructive testing, and applicable steel industry standards. Minimum Qualifications • Minimum of five years of experience in structural steel inspections, associated inspections, or metallurgical inspections., • Current AWS Welding Inspector certification., • Current ASNT Level II or III certification, or applicable NDT certification, as required., • Working knowledge of non-destructive testing techniques for steel., • Ability to read and understand engineering drawings, specifications, and construction contract documents.Preferred Qualifications, • Associate's degree in mechanical engineering, structural engineering, physical science, or a related field., • AISC audit qualification., • Experience inspecting columns, trusses, beams, welded steel pieces, wheels, axles, brake shoes, and other steel materials., • Knowledge of AREMA, ASTM, ASME, SAE, AWS, MIL, and Authority specifications.Responsibilities, • Inspect structural steel members and welded steel fabrications., • Review contract documents, drawings, and specifications provided by the Authority., • Perform or witness inspections using NDT methods such as radiographic, ultrasonic, magnetic particle, and liquid dye penetrant testing., • Verify compliance with project requirements and industry standards., • Inspect other steel materials as assigned., • Prepare inspection reports and support acceptance or rejection recommendations.Skills Structural steel inspection, welding inspection, AWS standards, ASNT/NDT methods, steel fabrication, blueprint reading, metallurgical inspection, AISC standards, technical documentation, and quality assurance.

Job Description Location: Linden, NJ (relocating to East Windsor, NJ) Company: Hansome Energy Systems Employment Type: Full-Time - Salary $25.00-$30.00 Per Hour About Hansome Energy Systems Hansome Energy Systems is a privately held industry leader in rotating electrical machinery, proudly supporting the U.S. Navy and other critical defense and industrial applications. We specialize in high-performance, precision-engineered equipment designed, built, and inspected to perform in the most demanding environments. Our commitment to quality, reliability, and mission readiness is the foundation of our work. Location & Facility Transition This position is currently based at our Linden, NJ facility and will be relocating to our new East Windsor, NJ facility. Candidates must be able to work in Linden during the transition and remain with the company through the move. Position Overview Hansome Energy Systems is seeking a highly detail-oriented Quality Control (QC) Inspector to ensure that mechanical and electrical components meet stringent defense and industrial quality standards. This role is critical to ensuring product reliability, regulatory compliance, and flawless execution of mission-critical equipment. The QC Inspector will perform dimensional inspections, documentation review, in-process checks, and final inspections. Key Responsibilities • Perform incoming, in-process, and final inspections on mechanical, electrical, and precision-machined components., • Verify parts and assemblies against drawings, specifications, and quality standards., • Use precision measurement tools such as calipers, micrometers, height gauges, bore gauges, dial indicators, and other inspection equipment., • Inspect for workmanship, proper assembly practices, dimensional accuracy, and material conformity., • Document inspection results, discrepancies, and nonconformances clearly and accurately., • Assist with root-cause investigations and corrective actions when defects are detected., • Review manufacturing documentation such as travelers, work instructions, certificates of compliance, and material certifications., • Ensure products meet all requirements before release to the next production stage., • Collaborate closely with production, engineering, and quality teams to resolve issues., • Support continuous improvement and maintain compliance with internal and external quality requirements. Qualifications Required • High school diploma or equivalent., • 1?3 years of experience in quality inspection or manufacturing., • Strong understanding of mechanical drawings, tolerances, and inspection requirements., • Proficiency with measurement tools such as calipers, micrometers, and gauges., • Strong attention to detail, accuracy, and documentation skills., • Ability to lift up to 50 lbs and stand for extended periods., • Ability to work in Linden, NJ during the transition and relocate to East Windsor, NJ upon facility move. Preferred • Experience in defense, aerospace, or other high-reliability manufacturing environments., • Familiarity with quality systems such as ISO 9001 or MIL-STD requirements., • Experience with nonconformance reporting (NCR), MRB processes, or internal audits., • Basic electrical knowledge or experience inspecting rotating electrical equipment., • Experience with statistical process control (SPC) or advanced measurement tools (CMM, height gage, etc.). Work Environment • Full-time, on-site QC inspection role., • Work involves manufacturing floor, inspection stations, and documentation work areas., • Exposure to shop environments, machinery, and moderate noise (with proper PPE)., • Quality- and safety-focused culture supporting defense and industrial programs. BENEFITS • Highly competitive wages, • Comprehensive and highly competitive health benefits including medical, dental and vision plans, • Generous 401k & profit-sharing plan, • Annual Bonus Opportunity, • Paid vacation/holidays, • Tuition Reimbursement To comply with US export control laws, applicants must be a US person (as defined by 22 C.F.R. & 120.62.) We are an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description Are you driven to grow, lead, and make a meaningful impact? At Apex, we're building more than a consulting and engineering firm—we're creating a place where your career accelerates, your contributions matter, and your potential is fully realized. We believe your growth is our growth, which is why we invest in your development at every stage of your career. Here, you'll work on projects that shape communities, protect the environment, and create lasting impact, all while being empowered with the autonomy and flexibility to do your best work. Fueled by high-quality delivery, exceptional client retention, and strategic acquisitions, Apex Companies continues to rank among the fastest-growing firms in the AEC industry, recently recognized by the Zweig Group for our industry-leading growth. Our success is grounded in strong leadership, a collaborative culture, and a shared commitment to delivering exceptional outcomes. As we continue to expand, we're looking for high-performing professionals who are ready to lead, collaborate, innovate, and create impact. At Apex, you help shape what's next. When we succeed together, we share in that success. All Apex positions are eligible for annual bonus opportunities, reinforcing our commitment to recognizing and rewarding meaningful contributions that drive our collective growth. Apex Companies is currently seeking an Industrial Hygienist – Scientist II to join our team out of our Iselin, NJ office. This is a field-heavy role that includes a blend of traditional industrial hygiene and building sciences work, with responsibilities spanning exposure monitoring, environmental sampling, and indoor environmental quality assessments across a variety of project sites. Your Responsibilities as an Industrial Hygienist: • Conduct personal exposure monitoring and noise dosimetry, • Assist with development of personal exposure sampling plans, • Collect noise, water, air, and/or building material samples., • Gather, analyze, and interpret data, • Prepare draft technical reports, • Industrial Hygiene Assessments of Chemical and Noise Exposures, • Indoor Environmental Quality, • Air Monitoring, • Building Materials Sampling, • Water Intrusion and Mold Assessments, • Moisture mapping, • Visible suspect biological growth assessments, • Mold sampling and clearance protocols, • Asbestos sampling, • Asbestos abatement project oversight, • Lead-Based Paint Inspections, • Clearance testing, • Assist with project oversight., • Mentor and train project staff., • Ensure safe work practices on all project work., • Actively develop your own career growth. What we're looking for: • BA/BS in Industrial Hygiene, Environmental Science/Engineering or other related field;, • At least 2+ years of proven technical experience., • Experience working with industrial hygiene (personal exposure monitoring/noise dosimetry, asbestos, mold and lead sampling., • Asbestos, lead and/or mold inspector certifications, preferred., • Additional EHS certifications/licensures or interest in pursuing additional qualifications highly desired. Why you'll love working for us: • Company-subsidized medical and dental., • Company-paid life, short, and long-term disability., • 401k match, tuition assistance, and more., • Cross-training and the ability to work on a variety of projects., • Performance-based bonuses or other incentives., • Working with the best and brightest in the industry., • 2,000+ employee national firm with 70+ locations across the US. #LI-MW1 Apex Job Title: Scientist 2 - Project Scientist Annual Expected Pay Range $65,000—$80,000 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact Talent@apexcos.com or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at www.MWNE.com and True-Environmental.com to discover the full scope of our capabilities. We are currently seeking a highly experienced and certified Senior Industrial Hygiene Technician/Project Manager to provide advanced technical execution, site leadership, and mentorship for our industrial hygiene and regulated building materials projects in the New York metro area.Annual Salary Range: $55 – $75 per hour commensurate with experience and advanced certificationsWhat You'll Do • Lead and execute complex, high-risk field assignments, including specialized monitoring for asbestos, lead, mold, and general industrial hygiene exposure assessments (e.g., noise, chemical air sampling)., • Act as the lead site technician and on-site client/contractor liaison for large-scale or multi-phase projects, ensuring all field work aligns with the approved scope and regulatory requirements., • Conduct and document comprehensive site investigations, risk assessments, and final clearance inspections with minimal oversight., • Perform initial quality review of field data, photographs, and chain-of-custody forms collected by junior staff to ensure accuracy and compliance., • Draft highly technical field reports, data summaries, and regulatory compliance documents for final review by the Project Manager or Certified Industrial Hygienist (CIH)., • Provide on-the-job mentorship and technical training to Junior and Mid-Level Technicians on advanced sampling techniques, complex abatement procedures, and regulatory interpretation., • Ensure rigorous compliance with OSHA, EPA, and state/local EHS regulations on all assigned projects., • Maintain, calibrate, and troubleshoot sophisticated industrial hygiene monitoring equipment. Minimum Requirements, • High School diploma required; AS or BS degree in Industrial Hygiene, Environmental Science, Safety, or a related field is strongly preferred., • Minimum of 7+ years of dedicated experience in performing asbestos, lead paint, mold, and general industrial hygiene field monitoring and inspections., • Advanced combination of IH certifications is mandatory:, • NYSDOL Asbestos Project Monitor and Air Sampling Technician (AHERA accreditation preferred)., • NYSDOL Mold Assessor., • NJ/EPA/NY Lead Risk Assessor/Inspector (or equivalent advanced accreditation)., • NYCDEP Asbestos Investigator., • Expert working knowledge of federal, state, and local IH and EHS regulations (OSHA, EPA, NYCDEP, NYSDOL, etc.)., • Proven ability to write clear, technically accurate field reports and mentor junior colleagues., • Must be available to provide site coverage for off-hours and extended shifts as necessary., • Must be able to pass a physical exam and be medically cleared to wear negative pressure respirator., • Must possess a valid driver’s license and an acceptable driving record., • Must successfully pass a pre-employment drug test and will be subject to DOT-regulated random drug & alcohol testing.Preferred Qualifications, • OSHA 40-hour HAZWOPER certification., • Additional advanced accreditations (e.g., Asbestos Project Designer or Supervisor)., • Proven experience in general health and safety oversight (beyond RBMs) or construction safety management., • Working towards a professional certification such as CIH or CSP.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionDescription: The Inspector is responsible for conducting airworthiness inspections and supporting quality assurance activities within Unilode’s repair station. The role ensures that all inspections, documentation, and repairs comply with regulatory standards, customer requirements, and safety protocols. The Inspector also contributes to workshop organisation, technical support, and regulatory audits, helping maintain highquality standards and on-time production. Key Responsibilities: Conduct Inspections and Approve Work Orders Customer Focus, Collaborate • Create and manage accurate and timely work orders in line with station processes., • Perform preliminary, hidden damage, in-progress, and final inspections of aircraft components., • Review and record results to ensure proper Return to Service (RTS) documentation. Ensure Compliance with Regulations and Technical Standards Courage, Collaborate • Verify compliance with FAA regulations, customer requirements, airworthiness directives, and service bulletins., • Apply OEM technical data and follow procedures outlined in the Repair Station Manual (RSM) and Quality Control Manual (QCM)., • Support the QA team and act on delegated quality-related duties from the Chief Inspector or QA Manager. Support Workshop Operations and Quality Assurance Collaborate, Customer Focus • Carry out routine and non-routine tasks independently to meet production schedules., • Assist the Chief Inspector in training and technical guidance of team members., • Operate material handling equipment, including forklifts (upon certification), and assist with vehicle loading/unloading. Audit Preparation and Customer Communication Courage, Customer Focus • Represent the repair station during audits or visits from customers and regulatory authorities., • Ensure compliance with electronic recordkeeping standards and maintain data security in FAA approved systems., • Provide support documentation and technical responses as required during inspections. Our Values in Action: • Be Humble and Curious – Continually learn and apply industry standards to maintain inspection excellence., • Inspire, Empower, and Prosper – Support operational readiness by sharing technical knowledge., • Take Ownership and Get Stuff Done – Perform inspections and ensure compliance with pride and accuracy., • Build a Better Future – Uphold quality and safety to enhance Unilode’s reliability and reputation., • Team Up to Be Better – Collaborate across the MRO team to maintain workflow efficiency., • Be Passionate About Our Customers – Ensure repair standards meet or exceed customer expectations., • Be Eager to Win – Deliver inspections on time while ensuring regulatory and quality standards are never compromised. The Small Print: This role requires working with technical documentation, tools, and regulatory systems in a dynamic MRO environment. The position involves physical tasks, including operating equipment and handling components, and requires a high degree of precision, accountability, and regulatory understanding. Occasional support during audits or out-of-hours operations may be expected. This is an overview of the role’s scope and its alignment with Unilode’s competencies and values. It is not an exhaustive list of responsibilities but serves as a guide to the key expectations and contributions of the position. Flexibility may be required to adapt to business needs. We are an Equal Opportunities Employer and are committed to creating an inclusive environment for all employees. We celebrate diversity and welcome applications from suitably qualified candidates regardless of age, disability, gender identity, marriage or civil partnership status, pregnancy and maternity, race, religion or belief, sex, sexual orientation, or any other characteristic protected by applicable law. Requirements: Skills and Experience Required: • Trade-based qualification or aviation-related certification (A&P licence or FAA Repairman Certificate preferred)., • Proven experience in aviation maintenance, quality, or repair inspection., • Strong knowledge of Federal Aviation Regulations (FAR Part 121, 145)., • Ability to work in fast-paced environments with minimal supervision., • Skilled in problem-solving, process compliance, and technical documentation., • Proficient in Microsoft Office and general computer literacy., • Forklift certification (preferred)., • Able to lift, pull, and push items exceeding 65 lbs. Anyone who performs (or are available to perform) a safety sensitive aviation activity (SSAA) can be tested for drugs and alcohol without notice or as part of pre-employment checks. We are an Equal Opportunities Employer and are committed to creating an inclusive environment for all employees. We celebrate diversity and welcome applications from suitably qualified candidates regardless of age, disability, gender identity, marriage or civil partnership status, pregnancy and maternity, race, religion or belief, sex, sexual orientation, or any other characteristic protected by applicable law. Notice of AI Use in Job Application Review As part of our commitment in creating a fair, efficient, and consistent hiring process we may use artificial intelligence (AI) to help our recruiting teams organize, summarize, and analyze information provided by candidates, including resumes, application responses, and other materials submitted during the application process.AI may be used to identify patterns, highlight relevant skills, and experience, and assist in comparing a candidate’s qualifications with the requirement of a specific role. These tools are to improve efficiency and consistency while supporting more informed hiring decisions, which will ultimately be made by the hiring team.

Job DescriptionWe are hiring immediately for a Railroad Auto Inspector to Join or team at the Norfolk Southern Doremus, NJ auto facility in a recession-proof industry! This is an entry-level position and no experience is required as we'll teach you everything you need to know in order to be successful on the job. This is an essential job and you'll have the opportunity to work for the #1 intermodal contractor in the United States! The schedule and rate will be discussed during the interview. APPLICANTS MUST currently live within a 45-minute commute of Newark, NJ. OUT OF AREA candidates and/or those requiring relocation will NOT be considered. Summary/Objective: The Auto Inspector is responsible for verifying the inventory of equipment and autos as well as checking incoming and outgoing equipment for damage. Terminal Location: PRS Auto (NS Doremus Railroad) 861 Doremus Ave.Newark, NJ. 07105. Responsibilities: • Inspects Auto units arriving and departing the railroad intermodal facility on train for unit number and damage to the unit. Inspects all auto units., • The position requires the employee to work both outdoors in all weather as well as indoors in a professional office environment., • This position requires travel throughout the yard verifying the initials and numbers of the units parked on the yard., • This position requires regular chassis checks typically taking approximately 2 hours in all weather conditions outside the vehicle walking on the intermodal ramp checking numbers., • The incumbent is required to wear Personal Protective Equipment (PPE) such as, a safety vest and protective hard hat when outdoors., • The performance of the Intermodal Unit Inspector is measured mainly by the accuracy of the trailer/container unit verification and the performance of these duties in a safe accident and injury-free manner., • The position must be aware of units moving in and around the intermodal yard., • Maintain a safe distance from moving vehicles at all times., • Taking photographs of the damage and completing necessary paperwork. Be aware of the office surroundings avoiding slips, trips, and falls. Benefits: (Medical benefits start after 60 days and the first of the month after that. Other benefits start after your 90-day probationary period). • Affordable Healthcare, Free Dental, and cheap Vision Benefits., • Free Life Insurance., • Paid holidays, paid personal days., • Boot reimbursement., • 401K., • Vacation Pay., • Weekly Pay., • Travel Opportunities., • Automobile Manufacturer Discounts., • Safety Incentives and Bonus programs. Qualifications for employment with the company, according to the Company hiring process includes: • Possess a valid Driver's License., • Must be able to pass a 7-year background check and a drug test., • No GED or High School Diploma is required.

Job Description Automotive Technician | $65K-$85K+ | Monday-Friday Mark's Auto Service Location: Gillette, NJ Schedule: Monday-Friday, 8:00 a.m.-5:30 p.m., with a one-hour lunch; occasional weekend work may be needed Pay Type: Hourly plus team performance bonus Pay Schedule: Weekly Earning Potential: $65,000-$85,000+ per year Typical Flagged Hours: 35-40 hours per week How to Apply (IMPORTANT) We move fast — and so should you. Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant “Paige” (takes about 10 minutes) After you apply, you'll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. About Mark's Auto Service Mark's Auto Service is seeking an experienced B-Level Automotive Technician in Gillette, NJ. This position offers $65,000-$85,000+ in annual earning potential with hourly pay plus a weekly team performance bonus. Technicians work Monday through Friday in a six-bay shop with six lifts, an alignment rack, air conditioning, and heat. The shop supports continued development through paid training, online education, and ASE certification reimbursement. Key Responsibilities Perform automotive maintenance and general repair across domestic, Asian, European, and fleet vehicles. Complete digital vehicle inspections using Shop-Ware with clear documentation of vehicle condition and recommended work. Diagnose drivability, mechanical, and electrical concerns using intermediate-to-advanced diagnostic skills. Use Snap-on and Autel scan tools to support accurate automotive diagnostics and repair decisions. Perform services and repairs including tires, brakes, oil-leak repairs, electrical work, maintenance, and engine-related repairs. Perform New Jersey emissions inspections when properly licensed. Complete approved repairs efficiently after inspection findings and recommendations are authorized. Work collaboratively with the General Manager, service advisors, and other technicians to maintain an efficient workflow. Qualifications Demonstrated B-Level automotive repair experience with the ability to complete most maintenance and repair work independently. Intermediate-to-advanced automotive diagnostic ability, including electrical and drivability diagnostics. Experience performing digital vehicle inspections is required. Experience servicing a broad mix of domestic, Asian, European, and fleet vehicles. ASE certifications are strongly preferred; Mark's Auto Service provides reimbursement for ASE certification. New Jersey emissions inspector licensing is a plus. New Jersey emissions repair licensing is a plus. Compensation & Benefits $65,000-$85,000 annual earning potential based on the approved pay structure and job-related qualifications. Hourly compensation plus a weekly team-based performance bonus. Weekly pay. Medical insurance with employer contribution of up to $500 per month. 401(k) with employer matching. Paid vacation: one week in the first year and two weeks in the second year. Six paid sick days per year, accruing at one-half day per month. Paid holidays. Uniforms provided. ASE certification reimbursement. Paid training, including online and classroom learning opportunities. Toolbox relocation assistance may be available when necessary. Why Work Here Mark's Auto Service can be your home. It operates a six-bay, six-lift facility with an alignment rack and climate-controlled work areas. The team works together in a collaborative environment, and technicians have access to paid training and continuing education opportunities. The shop services approximately 50-75 vehicles per week across domestic, Asian, European, and fleet work, providing a broad mix of maintenance, repair, electrical, and diagnostic work. Apply today and complete your initial screening with Paige to be considered for the Automotive Technician opportunity at Mark's Auto Service in Gillette, NJ. Additional Requirements Some positions may require a valid driver's license, motor vehicle record review, background screening, drug or alcohol screening, or other job-related pre-employment requirements based on the duties of the position, the client's lawful requirements, and applicable law. Any screening will be conducted at the legally permitted stage and in accordance with applicable federal, state, and local law. Qualified applicants, including those with criminal histories, will be considered in accordance with applicable law.

Signature is looking to add a Field Consultant for Clark County, Nevada.Are you looking for a new career that allows you to work independently, is flexible, and challenging every day, then we have a new and exciting career for you!.Get in Front of Our Recruiter Faster! To ensure your application is

Job Description Our client is a ommercial and industrial boiler contractor serving building owners, property managers, hospitals, universities, manufacturers, and process facilities across New Jersey and the greater New York metropolitan area. Our work spans new boiler and boiler room installations, code repairs and alterations to pressure-retaining equipment, burner and controls retrofits, preventive maintenance agreements, emergency service, and efficiency upgrade projects. We are seeking a General Manager to take full operational and financial ownership of the business. This is a true P&L role. You will run service, construction, and shop operations day to day, own the numbers that ownership sees every month, protect and advance our code certifications, and build a durable leadership culture in a trade where skilled labor is scarce and loyalty is earned rather than bought. The right person is equal parts operator, financial thinker, and people leader — comfortable in a boiler room at 2 a.m. and in front of a spreadsheet the next morning. This role exists to professionalize how the business runs without breaking what already works. You will inherit experienced field technicians and long-standing customer relationships. Your job is to raise margin, tighten execution, and modernize systems while keeping the crew intact and the phone answered. Core Responsibilities Profit & Loss Ownership You own the P&L outright — top line, gross margin, overhead, and net. You will be accountable for annual budgeting, monthly forecasting, and the variance conversations that follow when actuals miss plan. • Build and defend the annual operating budget across every revenue line: service labor, preventive maintenance agreements, projects and retrofits, parts and equipment sales, rental, and shop work., • Own gross margin by division and by job. Understand where margin is made and where it leaks — mispriced service calls, unbilled work, warranty rework, unmanaged overtime, change orders never captured., • Manage work-in-progress and percentage-of-completion reporting on project work, including over/under billings, cost-to-complete accuracy, and backlog quality., • Drive cash performance: billing velocity, DSO, retainage recovery, unbilled revenue, and vendor terms., • Approve pricing, quoting standards, labor rates, and markup structures; make the call on which work is worth chasing and which is not. Financial Reporting & Analysis Produce the monthly financial package that ownership relies on to make decisions. This is not accounting support work — you are expected to build the reporting, interpret it, and act on it. • Assemble and present a monthly package including P&L with budget variance, gross margin by revenue line, backlog and WIP schedules, cash flow and aging, and KPI dashboards with commentary on what moved and why., • Build the operating metrics that run the business: technician billable utilization and labor efficiency rates, revenue per technician, first-time fix rate, callback percentage, average service ticket, quote-to-close conversion, PM agreement renewal and attachment rates, and overtime as a percentage of field labor., • Prepare capital request business cases for fleet, tooling, shop capacity, and headcount, with payback and return expectations stated plainly., • Develop customer-facing financial proposals for capital projects — installed cost, projected fuel and efficiency savings, simple payback and lifecycle cost, and applicable utility incentive and rebate capture. Operations, Code Compliance & the R Stamp Program You are the executive owner of our quality and code program. You are not expected to personally perform inspections or weld, but you are expected to understand what our certifications require and to make sure the organization never puts them at risk. • Maintain the integrity of the company’s National Board R Certificate of Authorization: enforce the Quality Control Manual in daily practice, support the designated QC Manager, manage the relationship with our Authorized Inspection Agency, and lead preparation for triennial National Board review and renewal audits., • Ensure repairs and alterations to pressure-retaining items are performed and documented to NBIC (NB-23) requirements, including R-1 and R-2 form execution, proper nameplate and stamping practice, and complete traceability of materials and welder qualifications., • Govern the welding program: ASME Section IX WPS, PQR, and welder performance qualification currency; continuity logs; and NDE coordination with third-party testing partners., • Apply ASME Section I, Section IV, and Section VIII Division 1 requirements appropriately across power boilers, heating boilers, and pressure vessels., • Enforce ASME CSD-1 controls and safety device requirements and NFPA 85 combustion safety practice on automatically fired equipment., • Own field execution across service dispatch, project scheduling, manpower planning, procurement and equipment lead times, subcontractor management, fleet, and shop throughput., • Own safety outcomes and the metrics that follow the company into every bid: TRIR, DART, and Experience Modification Rate. Lockout/tagout, confined space entry for boiler and vessel work, hot work, and respiratory protection are non-negotiable disciplines. Team Leadership & Change Management The technical problems in this business are solvable. The people problems are the hard part, and they are the reason this role exists. We are looking for high emotional intelligence — someone who reads a room, hears what a technician is actually saying under a complaint, and can hold a hard line without humiliating anyone. • Lead a multi-disciplinary team spanning field service technicians, boilermakers and welders, project managers, estimators, dispatch, and administrative staff., • Introduce process, measurement, and accountability into an environment that has historically run on relationships and tribal knowledge — and do it in a sequence the team can absorb. Sequencing and communication matter more than the changes themselves., • Build the succession bench: recruit, develop, and retain technicians in a labor market where the experienced boiler mechanic pool is shrinking and every competitor is fishing in the same pond. Own the apprenticeship and mentoring pipeline., • Set clear performance expectations, run consistent one-on-ones and reviews, coach the willing, and move decisively on the unwilling., • Serve as the escalation point for customer conflict, jobsite disputes, and internal friction — de-escalating without conceding margin. Commercial Growth & Customer Retention • Grow recurring revenue through preventive maintenance agreements and full-coverage service contracts; improve renewal rates and expand scope within existing accounts., • Support estimating and bid strategy on larger installations and retrofits; sit at the table on the accounts that matter., • Position the company on efficiency-driven work — burner and controls upgrades, condensing economizers, boiler plant optimization, fuel conversions, and decarbonization retrofits — where regulatory pressure is generating demand., • Maintain relationships with OEMs, distributors, engineering firms, mechanical contractors, and property management groups. Requirements Required Qualifications • Ten or more years of progressive operations leadership in commercial or industrial boiler, mechanical HVAC, power generation, or process piping contracting, including at least five years with direct P&L accountability., • Demonstrated experience operating inside an R Stamp certified organization — you have lived under a Quality Control Manual, worked alongside an Authorized Inspector, and been through a National Board review., • Working command of ASME Boiler and Pressure Vessel Code and the National Board Inspection Code as they apply to repair, alteration, and new installation., • Track record of improving gross margin and operating income in a service-and-project business, with specific numbers you can speak to., • Proven ability to build financial reporting from operational data and present it credibly to an owner, board, or private equity sponsor., • Experience leading fifteen or more employees across field and office functions, including hiring, development, and performance management., • Fluency with service management and ERP platforms and the discipline to make a team actually use them., • Bachelor’s degree in engineering, construction management, business, or a related field — or an equivalent combination of trade credentials and operating experience., • Valid driver’s license and willingness to be present in the field and at customer sites throughout the NJ/NY territory. Preferred Qualifications • Direct experience managing or holding responsibility for an R Stamp quality program, including manual authorship or revision and audit preparation., • Additional ASME certifications in the organization’s scope, such as S, U, PP, or A stamps, and National Board VR experience., • Prior background as a boiler technician, boilermaker, welder, or field service engineer before moving into management., • Experience with combustion analysis, boiler efficiency testing, stack loss and thermal efficiency measurement, O2 trim, turndown optimization, and heat recovery., • Union contract administration experience in the NJ/NY market., • Formal change management, Lean, or continuous improvement training., • Experience integrating an acquired business or standing up new systems and processes post-acquisition. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Compensation: $100,000 - 150,000 base salary + bonues and car allowance

Automotive Technician | $65K-$85K+ | Monday-Friday \n Mark's Auto Service Location: Gillette, NJ Schedule: Monday-Friday, 8:00 a.m.-5:30 p.m., with a one-hour lunch; occasional weekend work may be needed Pay Type: Hourly plus team performance bonus Pay Schedule: Weekly Earning Potential: $65,000-$85,000+ per year Typical Flagged Hours: Not Flat Rate \n How to Apply (IMPORTANT) \n We move fast — and so should you. \n Step 1: Apply \n Step 2: Complete a quick phone interview with our AI assistant “Paige” (takes about 10 minutes) \n After you apply, you’ll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. \n About Mark's Auto Service \n Mark's Auto Service is seeking an experienced B-Level Automotive Technician in Gillette, NJ. \n This position offers $65,000-$85,000+ in annual earning potential with hourly pay plus a weekly team performance bonus. \n Technicians work Monday through Friday in a six-bay shop with six lifts, an alignment rack, air conditioning, and heat. \n The shop supports continued development through paid training, online education, and ASE certification reimbursement. \n Key Responsibilities \n\n • \n Perform automotive maintenance and general repair across domestic, Asian, European, and fleet vehicles. \n • \n Complete digital vehicle inspections using Shop-Ware with clear documentation of vehicle condition and recommended work. \n • \n Diagnose drivability, mechanical, and electrical concerns using intermediate-to-advanced diagnostic skills. \n • \n Use Snap-on and Autel scan tools to support accurate automotive diagnostics and repair decisions. \n • \n Perform services and repairs including tires, brakes, oil-leak repairs, electrical work, maintenance, and engine-related repairs. \n • \n Perform New Jersey emissions inspections when properly licensed. \n • \n Complete approved repairs efficiently after inspection findings and recommendations are authorized. \n • \n Work collaboratively with the General Manager, service advisors, and other technicians to maintain an efficient workflow. \n\n Qualifications \n\n • \n Demonstrated B-Level automotive repair experience with the ability to complete most maintenance and repair work independently. \n • \n Intermediate-to-advanced automotive diagnostic ability, including electrical and drivability diagnostics. \n • \n Experience performing digital vehicle inspections is required. \n • \n Experience servicing a broad mix of domestic, Asian, European, and fleet vehicles. \n • \n ASE certifications are strongly preferred; Mark's Auto Service provides reimbursement for ASE certification. \n • \n New Jersey emissions inspector licensing is a plus. \n • \n New Jersey emissions repair licensing is a plus. \n\n Compensation & Benefits \n\n • \n $65,000-$85,000 annual earning potential based on the approved pay structure and job-related qualifications. \n • \n Hourly compensation plus a weekly team-based performance bonus. \n • \n Weekly pay. \n • \n Medical insurance with employer contribution of up to $500 per month. \n • \n 401(k) with employer matching. \n • \n Paid vacation: one week in the first year and two weeks in the second year. \n • \n Six paid sick days per year, accruing at one-half day per month. \n • \n Paid holidays. \n • \n Uniforms provided. \n • \n ASE certification reimbursement. \n • \n Paid training, including online and classroom learning opportunities. \n • \n Toolbox relocation assistance may be available when necessary. \n\n Why Work Here \n Mark's Auto Service can be your home. It operates a six-bay, six-lift facility with an alignment rack and climate-controlled work areas. The team works together in a collaborative environment, and technicians have access to paid training and continuing education opportunities. The shop services approximately 50-75 vehicles per week across domestic, Asian, European, and fleet work, providing a broad mix of maintenance, repair, electrical, and diagnostic work. \n Apply today and complete your initial screening with Paige to be considered for the Automotive Technician opportunity at Mark's Auto Service in Gillette, NJ. \n Additional Requirements \n Some positions may require a valid driver’s license, motor vehicle record review, background screening, drug or alcohol screening, or other job-related pre-employment requirements based on the duties of the position, the client’s lawful requirements, and applicable law. Any screening will be conducted at the legally permitted stage and in accordance with applicable federal, state, and local law. Qualified applicants, including those with criminal histories, will be considered in accordance with applicable law. \n \n #Appcast500

International Ground Source Heat Pump Association (IGSHPA) Inspector Certification.

Titanium Fabrication (TiFab) is looking for a hands-on Quality Inspector to support the inspection of precision fabricated and machined components used in defense, chemical processing, and industrial applications.This role combines shop floor inspection with quality documentation, giving you ownersh

Experience with document control systems and quality management frameworks. Assist in executing and monitoring the Quality Management Plan, ensuring procedures are properly followed throughout the project lifecycle. Provide feedback on quality documentation and support project management with action

An EWR (Newark Liberty International Airport) building or construction inspector monitors terminal, facility, and infrastructure projects to ensure compliance with safety codes, blueprints, and port/aviation standards. Certifications: Uniform Construction Code (UCC) subcode/inspector licenses or ICC

Site Inspections: Monitor active construction,-reno, or trade work (building,-fire,-plumbing, or-electrical) for code and contract compliance. An EWR (Newark Liberty International Airport) building or construction inspector monitors terminal, facility, and infrastructure projects to ensure complianc

Parsons is looking for an amazingly talented Quality Inspector to join our team! In this role you will get to work on the premier infrastructure project in the country, as well as receive all of the benefits of working for Parsons! This Program is a comprehensive set of rail investments that will im

Are you an experienced professional in the roofing industry who would love to work with and learn from one of the most knowledgeable and resourceful roofing contractors in the industry? This top rated roofing contractor is looking to expand! We are looking for big picture people who thrive in a team atmosphere. Field Inspector Candidate Requirements • A minimum of five years roofing industry experience, • Ability to travel in order to meet the demands of our clients in the tri-state area with occasionally travel outside the region, • Knowledge of commercial roofing industry processes, materials, and methods, • Ability to read and understand detailed commercial roofing project plans and specifications, have knowledge of different commercial roofing systems, and understand commercial roofing installation methods, • Must be tech savvy (Microsoft Office platform, proprietary web and mobile based roofing applications is required), • Excellent time management and organizational skills are a requirement for our roofing field inspectors, • RRO and RRC professional certifications, as well as Level I, II or III thermographer certifications are highly desired, but not required, • Must be a self-starter who is driven, sales-oriented, and is able to foster professional relationships with both peers and clients My client has consistently experienced year-over-year growth, driven by its reputation for top-quality work with exceptional and professional customer service. The leadership is built on the foundation of honesty, integrity, and dedication. Come be a part of this award winning team. Compensation • Base salary based on experience, • The company pays bonuses based on company performance, • Room for growth - company hires from within and gives the opportunity to move up, • 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance, • Company truck or allowance If you are looking for a place where you can grow with the company then look no further. We are looking for the right individual we can train towards success. We are looking for those professionals who are looking for long-term career growth. Please send your resume to Amonique.Strehle@gogpac.com You can call me @ 605-277-1094 All qualified applicants will receive consideration without regard to race, age, color, sex (including pregnancy), religion, national origin, disability, sexual orientation, gender identity, marital status, military status, genetic information, or any other status protected by applicable laws or regulations. GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990. We are extremely competitive, client-focused and realize that our value is in our ability to deliver the right solutions at the right time.

The Construction Inspector is responsible for oversight of all capital construction work, including planning, assigning, monitoring, and reporting on all construction work completed by South Jersey Industries team members and contractors. Additionally, the Construction Inspector supports the executi

Arcadis is seeking a Material Inspector to support one of the most iconic and consequential infrastructure initiatives in the United States the Gateway Hudson Tunnel Project (HTP).

Construction Inspector Municipal (Part Time). Perform construction inspections and material testing for stormwater management facilities, roads, land developments, wastewater collection & conveyance systems, water distribution & treatment facilities, as well as other infrastructure. Assist with con

Arcadis is seeking a highly skilled and motivated Quality Inspector to support one of the most iconic and consequential infrastructure initiatives in the United States the Gateway Hudson Tunnel Project (HTP).

Electrical Factory Inspector (Remote/Travel). Electrical Factory Inspector (Remote/Travel) responsibilities include, but are not limited to, the following:. We're excited to share that the Electrical & Electronics (E&E) business of Eurofins is now part of UL Solutions.

Infrastructure Engineering Inc's (IEI) New York Office is looking for an experienced Senior Construction Inspector to join our team working with The Port Authority of New York and New Jersey at JFK Airport! We are a multi-disciplinary prime consulting firm that focuses on the delivery of design engi

Construction Inspector; FTA & BABA Compliance. As the Construction Inspector; FTA & BABA Compliance, you will play a pivotal role in the delivery of this significant project. We are currently seeking a dedicated and accomplished Construction Inspector; FTA & BABA Compliance for the Hudson Tunnel Pro

Highway and Bridge Construction Inspector. Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site. Proficient in Microsoft Office and project/construction management software.

Position: Senior Inspector NJ DCA. Qualified NJ DCA Certified Special Inspector to support inspection services on construction projects throughout New Jersey. NJ DCA Special Inspector Concrete Placement.

Position requires a valid license as a Building Inspector issued by the NJDCA. License requirements applicants must possess a valid license as a Building Inspector (Rcs), (Ics), and (Hhs) (Subcode) license issued by the NJDCA. Building Inspector Hhs Summit City, NJ.

Senior Construction Inspector Bridge. Position: Senior Construction Inspector Bridge. Equivalent combination of education, technical training, and relevant bridge construction/inspection experience may be considered.

The successful candidate will perform plan review along with a variety of duties for the city, which will include inspecting new and existing residential, commercial, and industrial buildings and structures to enforce compliance with applicable local and building codes. LICENSE REQUIREMENTS Applica

Responsible for field construction observations/tracking of construction sequencing, cost, scheduling, and contractor performance. Experience in reviewing, reading and interpreting Site/Grading/Drainage/Utility/Erosion Control plans, construction details, Technical Specifications, and Technical Desi

The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel. The Gateway Develo

The Inspector is responsible for conducting airworthiness inspections and supporting quality assurance activities within Unilode's repair station. The Inspector also contributes to workshop organisation, technical support, and regulatory audits, helping maintain high-quality standards and on-time pr

Cutting-Edge Projects: Be part of critical work in aerospace, defense, and energy. Valcor Engineering is a trusted name in aerospace, nuclear, and defense sectors.

Parsons is looking for an amazingly talented Motor Vehicle Inspector to join our team! In this role you will perform vehicle inspections. What You'll Be Doing: • Perform complete vehicle safety and emissions inspections within the lane and enter data into the computer., • Responsible for the accuracy of vehicle inspection data including: vehicle type, engine size, inspection, sticker, etc., • Maintain a safe and clean work area by removing oil, water and other materials from the lane and equipment, • Provide excellent and courteous customer service., • Explain vehicle inspection results to customers in a clear, concise, understandable and polite manner. What Required Skills You'll Bring: • High School diploma or equivalent, • Must possess a valid driver's license, • Ability to obtain a New Jersey inspector's license upon employment (paid training provided) What Desired Skills You'll Bring: • Must have good oral communications, • Must possess and use good customer service skills, • Computer skills preferred Minimum Clearance Required to Start: Not Applicable/None Benefits: • Full benefits package (medical, dental, vision and 401K), • Paid job training to get NJ State Inspector's License, • Starting wage of $16.32 per hour with promotions up to $24.19 per hour, • 4 paid breaks per day, • Uniforms (including winter coats and shoes) provided at no cost, • Paid Time Off: 14 paid holidays per year including your birthday! Earn up to 5 sick days and up to 6 vacation days your first year, and then 5 sick days and 10 vacation days at the beginning of the next calendar year. Salary Range: $16.32 $24.19 Security Clearance Requirement: None

As a Roof Field Inspector, you'll be part of our dynamic network of independent contractors, conducting assessments on steep and high roofs, evaluating exterior and interior damage, and performing underwriting property inspections. Utilizing cutting-edge technology, our inspectors help assess proper

Lead Quality Control Inspector. ASQ Certified Quality Inspector (CQI). South Kearny facility combines CNC and conventional manufacturing with a fully equipped quality assurance lab.

Construction Inspector - Rail and Transit. Parsons is looking for an amazingly talented Construction Inspector - Rail and Transit to join our team! In this role you will get to work on the premier infrastructure project in the country, as well as receive all of the benefits of working for Parsons! T

Warby Parker is searching for a well-rounded Sales Advisor to help us deliver the best possible service to each and every one of our customers. In supporting our retail locations across the country (and Canada!), Advisors have a direct, immediate impact on the success of Warby Parker through customer interactions, process ideation and improvement, and various special projects. We've grown to who we are today thanks in no small part to them! In this role, you'll get to show folks firsthand what Warby Parker is all about while making glasses shopping a goosebump-inducing experience. Sound cool? Read on! What you'll do: • Communicate Warby Parker's values and brand philosophy on the sales floor, • Delight customers through nothing-but-wonderful service, • Demonstrate unparalleled product knowledge and offer exceptional style advice, • Dream up ways to reinvent retail and the glasses-shopping experience, • Anticipate the needs of your team and customers alike, and be at the ready to lend hand, • Help foster an inclusive culture by treating customers and colleagues with respect Who you are: • Excited to work and learn at a fast-paced, high-growth company, • Backed by customer-facing experience in a service-minded environment, • A proactive, adaptable problem-solver who reacts quickly in unexpected situations, • A positive team player who leads by example, • Able to effectively communicate with a variety of people, • Organized, attentive, and detail-oriented, • An energetic self-starter with an entrepreneurial spirit, • Interested in fashion and technology, • Not on the Office of Inspector General's List of Excluded Individuals/Entities (LEIE) In compliance with local and state requirements, Warby Parker is committed to pay transparency. We offer a comprehensive compensation package that includes not only a competitive base salary/hourly rate but also variable compensation for eligible employees. For applicable postings, the range listed is a good faith estimate of the compensation for this position at the time of posting. Final compensation is thoughtfully determined by a variety of factors, including the candidate's qualifications, experience, internal equity, and relevant market data. For applicable postings, non-exempt employees are eligible for overtime pay if you are required to work more than 40 hours in a workweek. Some benefits of working at Warby Parker for full-time employees: • Health, vision, and dental insurance, • Life and AD&D Insurance, • Paid sick leave, • Paid Holidays, • Vacation days per year, • Retirement savings plan (401(k)), • Parental leave (non-birthing parents included), • Short-term disability, • Employee Stock Purchase Plan, • Employee Assistance Program (EAP), • Bereavement Support, • Optical Education Reimbursement, • Free eyewear, • And more (just ask!) Some benefits of working at Warby Parker for part-time employees: • Employee Assistance Program (EAP), • Employee Stock Purchase Plan, • Free eyewear, • Paid sick leave, • And more (just ask!) Warby Parker will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. If you are a California resident, please review the additional privacy disclosures available in Section 8 of our Privacy Policy, which provides a summary of how we collect, use, disclose, and share personal information about you and explain your rights under the California Privacy Rights Act ("CPRA"). It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. CO only: The application window for this position is anticipated to close on the apply before date listed. We encourage interested candidates to apply through our Career website. 1 WA only: Full-Time employees' paid sick leave is accrued at a rate of 1 hour per every 26 hours worked. Full-time employees receive 5 paid holidays and 5-10 vacation days per year (after waiting period, depending on tenure and hours worked). 2 WA PT only: Paid sick leave (accrued at a rate of 1 hour per every 30 hours worked). Warby Parker was founded with a mission: to inspire and impact the world with vision, purpose, and style. We're constantly asking ourselves how we can do more and make a greater impact, and that starts by reimagining everything that a company and industry can be. We want to demonstrate that a business can scale while doing good in the world, without charging a premium for it. And we've learned that it takes creativity, empathy, and innovation to achieve that goal. Since the day we launched in 2010, we've pioneered ideas, designed products, and developed technologies that help people see. We offer everything you need for happier eyes at a price that leaves you with money in your pocket, from designer-quality glasses and contacts to eye exams and vision tests, and you can meet us online, at our stores, or even in your home. Wherever and whenever you need it, we're there to make exceptional vision care simple and accessible. (Delightful, too.) Ultimately, we believe in vision for all, which is why for every pair of glasses or sunglasses we sell, a pair of glasses is distributed to someone in need through our Buy a Pair, Give a Pair program. • Job Identification 4755, • Job Category Retail Advisor, • Posting Date 08/01/2026, 05:43 PM, • Job Schedule Part time, • Locations 07078, • Minimum Rate/Salary 17.00, • Maximum Rate/Salary 17.00

Signature Companies is looking to add Field Consultants to cover the following counties: Essex, Union, Middlesex. Communicate the information gathered during the on-site inspection in Loss Control 360 accessed through the Signature website. Signature Companies has been a trusted provider of inspecti