Trabajos inspector en Miami, FloridaCrear alertas

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Shop Apprentice will work closely with experienced technicians, inspectors, engineers and stock room clerks to learn and develop skills related to the repair. This hands-on apprenticeship provides the opportunity to gain practical experience, technical knowledge, and professional skills while adhering to safety standards and company procedures. As an apprentice, you will assist with various tasks, including repairs, installations, and routine maintenance, while working toward an opportunity to become a Level 1 Technician within FTAI. The role requires a strong willingness to learn, attention to detail, and the ability to follow instructions in a fast-paced and safety-conscious environment. Responsibilities: • Perform preservation tasks as per engine manual., • Engine stand removal and installations as per engine manual., • Support the removal, and installation of inside of containers., • Work closely with experienced technicians, engineers, inspectors, and supervisors to develop technical expertise., • Cleaning and maintenance of Containers and Engine Stands, • Maintain a clean and organized work environment daily, ensuring tools and equipment are properly maintained and stored at the end of shifts., • Help with the issuance and filing of documentation of work performed inside of ERP system., • Assist and perform stockroom functions as needed., • Ad-hoc tasks required for the proper functioning of the shop., • High school diploma or equivalent (required)., • Strong mechanical aptitude and willingness to learn., • Ability to read and interpret technical manuals and schematics., • Attention to detail and commitment to safety., • Good problem-solving and teamwork skills., • Basic computer skills for documentation and training modules., • MRO - ETC shops., • Exposure to noise and equipment., • Physical demands include standing, lifting, and working in confined spaces., • Level 1 MRO/ETC Technician, • Detailed/Surveillance Inspector, • Materials Coordination, • Records Clerk Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Job Description Level 2 - Mechanical Inspector For almost 30 years, SQA Services has been a premier leader in providing managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. Key Responsibilities: • Conduct visual, physical, and dimensional inspections (in-process, incoming, final and witness inspections) of machined parts, in accordance with project specifications and requirements., • Compile final inspection sign-off sheets and inspection packages., • Verify that inspection equipment can detect defects and ensure inspection methodology is in line with drawing intent., • Review and validate the justification for parts not inspected at final inspection., • Document non-conformances using approved methods and submit non-conformance reports for customer disposition., • Previous mechanical inspection experience., • Experience with AS9102 (FAI)., • Knowledge of GD&T and inspection methodologies., • Strong attention to detail and ability to follow inspection plans and protocols., • Experience with the use of precision measurement tools and equipment., • Ability to read and interpret blueprints and/or engineering drawings, • Over 3 years of mechanical parts inspection experience This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. Company DescriptionSQA Services is a leading Supply Chain and Quality Assurance consulting firm specializing in the management of Supplier Audit, Quality Engineering, Inspection, and Remediation programs in the Aerospace/Defense, Semiconductor, Medical Device, Pharmaceutical, Cosmetic, and Automotive manufacturing industries. Clients leverage our network of quality professionals in more than 50 countries as an extension of their own supplier quality teams.SQA Services is a leading Supply Chain and Quality Assurance consulting firm specializing in the management of Supplier Audit, Quality Engineering, Inspection, and Remediation programs in the Aerospace/Defense, Semiconductor, Medical Device, Pharmaceutical, Cosmetic, and Automotive manufacturing industries. Clients leverage our network of quality professionals in more than 50 countries as an extension of their own supplier quality teams.

Job Description Job Posting Title: QC Inspector, Heavy Maintenance Reports to: Manager, Quality Control Overview: The QC Inspector – Heavy Maintenance ensures compliance with Global X’s Continuous Airworthiness Maintenance Program (CAMP) and FAA regulations. This role is responsible for inspections, surveillance, and audits of heavy maintenance activities to ensure aircraft airworthiness prior to release. The inspector serves as the on-site Quality representative during heavy maintenance events and collaborates closely with vendor personnel, Maintenance Control, and Engineering teams. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: • Perform Line Maintenance, Remain Over Night (RON), and Receiving Inspections (RI)., • Monitor maintenance work, workmanship, and materials to ensure compliance with Global X procedures and FAA regulations., • Conduct Required Inspection Item (RII) in-process inspections and review related documentation., • Audit completed aircraft records (e.g., logbook pages, work cards, non-routines, engineering documents)., • Oversee Heavy Maintenance or Special Maintenance visits., • Perform Borescope inspections when qualified., • Review and approve work documents for accuracy and completeness., • Record discrepancies in logbooks and non-routine forms., • Provide “buy-back” of RII and non-RII maintenance actions., • Approve return-to-service for maintenance, preventive maintenance, and alterations., • Issue airworthiness releases (AWR)., • Reject unsatisfactory work and non-conforming parts during inspection., • Prepare and issue audit reports identifying risks, corrective actions, and compliance gaps., • Conduct inspections and audits of contractors, repair vendors, overhaul services, fueling, deicing, and parts suppliers., • Follow all company and safety regulations to maintain a safe work environment., • Valid FAA Airframe & Powerplant (A&P) license held for at least 5 years., • Proficiency with TRAX maintenance software., • Documented inspection experience, including RII Authorization., • Preferred: prior experience with NDT methods (Liquid Penetrant, Eddy Current, Borescope)., • Strong analytical, problem-solving, and communication skills., • Experience with aircraft parts and materials handling. WORK LOCATION AND SCHEDULE: This is a full-time, salaried position based at our Miami base. The QC Heavy Maintenance Inspector will travel regularly to vendor facilities and maintenance sites where heavy checks are performed. The role requires flexibility in scheduling, including evenings, weekends, and holidays, to support operational needs. Travel may be domestic or international depending on where heavy maintenance events are conducted. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 25 pounds and occasionally lift and move up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Detail Inspector works in accordance with the current technical data provided in the manufacturer’s instructions for continued airworthiness service bulletins, service letters for performing preliminary hidden-damage, in-process and final inspections on civil aviation on aviation airworthiness directives, government and industry-standard practices, and other data acceptable to or approved by the FAA. Responsibilities: • Ensuring that they are thoroughly familiar with the inspection methods, techniques, aids, tools, and equipment used within their assigned area of responsibility., • Maintaining proficiency in using the inspection aids in their assigned area of responsibility Understanding the current specifications involving inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Ensuring that the inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Understand the current specifications involving inspection tolerances, limitations, and procedures established by the manufacturer of the article being inspected and must understand, speak, and write the English language., • Ensure all inspections are properly performed and recorded, and all records are properly executed before final approval for return to service of articles maintained or altered by this repair station., • Perform disassembly and repair of all types of aircraft engine usable parts, • Assist with the reconfiguration or reconditioning of equipment, • Perform scripted test procedures to isolate the failure to sub-assembly and/or component level, • Perform scripted repair procedure to repair and functionally test part or product, • Assist Repair Technicians/Engineers/Technical Services as required, • Maintain constant adherence to inventory control practices and procedures, • High School or equivalent, • Hold and airframe and/or powerplant license, • Must possess exceptional attention to detail, • Basic PC knowledge, • Proficiency in working with all hand tools and pneumatic tools, • Ability to isolate failures within and a complete rework of parts and assemblies, • Ability to perform within company quality standard, • Must be legally authorized to work in the U.S, • Knowledge of troubleshooting and repair of parts and concepts preferred, • Some knowledge of troubleshooting concepts, • Ability to learn and perform basic repairs Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Inspector articles in accordance with the current technical data provided in the manufacturer’s instructions for continued airworthiness service bulletins, service letters for performing preliminary hidden-damage, in process and final inspections on civil aviation on aviation airworthiness directives, government and industry standard practices and other data acceptable to or approved by the FAA. Shift schedule: 2:30pm-11:00pm Responsibilities: • Ensuring that they are thoroughly familiar with the inspection methods, techniques, aids, tools and equipment used within their assigned area of responsibility., • Maintaining proficiency in using the inspection aids in their assigned area of responsibility Understanding the current specifications involving inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Ensuring that the inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Understand the current specifications involving inspection tolerances, limitations and procedures established by the manufacturer of the article being inspected and must understand, speak and write the English language., • Ensure all inspections are properly performed and recorded, and all records are properly executes before final approval for return to service of articles maintained or altered by this repair station., • Perform disassembly and repair of all types of aircraft engine usable parts, • Assist with the reconfiguration or reconditioning of equipment, • Perform scripted test procedures to isolate failure to sub-assembly and/or component level, • Successfully replace failed sub-assembly, part, or component to bring failed device to working order, • Perform scripted repair procedure to repair and functionally test part or product, • Assist Repair technicians/Engineers/Technical Services as required, • Maintain constant adherence to inventory control practices and procedures, • High School or equivalent and basic computer skills, • Airframe and/or Powerplant license, • Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance., • 3 – 5 years experience in a lead role for an aircraft jet engine maintenance., • Experienced with borescope inspection and interpretation of technical data during the borecope process., • Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine., • Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner., • Be able to read, write, speak, and understand the English language. Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. Shift schedule: 2:30pm-11:00pm

Job Description We are currently recruiting for a Detail Inspector job in Miami Florida. You’ll be working with a company that performs full CFM56 performance restorations, special repairs, piece parts and module repairs as well as engine exchanges and field service support globally. They are a high-performance FAA 145 / EASA Certified Repair Station and a CASE registered organization. They specialize in offering creative and cost-effective solutions for the CFM56 (-7B, -5B, -3) Engine Series by maintaining its 3 cornerstones – Custom Tailored Solutions, Extraordinary Responsiveness and World Class EGT Margins. What Is In It For You Salary: $30-$40 hour (depending on relevant experience) Benefits: Health, Dental and Vision insurance; Life insurance; Short term and long-term disability; Aflac supplemental insurance; Paid vacation and sick days; Paid holidays; 401k with employer match OUR CLIENTS STORY Our client has been established since 2009 and has had a breakthrough in the jet engine maintenance industry serving airlines, lessors, and aviation organizations worldwide. Being part of this company means having opportunities to make a difference. They are committed to Quality and continually invest in people, processes and technology in support of this. They place great priority in their employees and building up their team members. They are committed to building their employees and growing them to become great leaders. This adds tremendous value not only to their organization, but also to their community and to everyone that is touched by the passion their workforce has to offer. JOB DESCRIPTION The Inspector will follow articles in accordance with the current technical data provided in the manufacturer’s instructions for continued airworthiness service bulletins, service letters for performing preliminary hidden damage, in process and final inspections on civil aviation on aviation airworthiness directives, government and industry standard practices and other data acceptable to or approved by the FAA. ESSENTIAL JOB FUNCTIONS FOR THE DETAIL INSPECTOR POSITION IN MIAMI,FL: A Day In The Life of a Detail Inspector: • Ensuring that they are thoroughly familiar with the inspection methods, techniques, aids, tools and equipment used within their assigned area of responsibility., • Maintaining proficiency in using the inspection aids in their assigned area of responsibility Understanding the current specifications involving inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Ensuring that the inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Understand the current specifications involving inspection tolerances, limitations and procedures established by the manufacturer of the article being inspected and must understand, speak and write the English language., • Ensure all inspections are properly performed and recorded, and all records are properly executed before final approval for return to service of articles maintained or altered by this repair station., • Successfully replace failed sub-assembly, part, or component to bring failed device to working order, • Perform scripted repair procedure to repair and functionally test part or product, • Assist Repair technicians/Engineers/Technical Services as required, • Maintain constant adherence to inventory control practices and procedures, • Interpret OEM manuals and routers instructions Qualifications Required • Powerplant License required, • Good written and verbal communication skills, • Knowledge of troubleshooting and repair of parts and concepts preferred, • Proficiency working with all hand tools and pneumatic tools essential, • Some knowledge of troubleshooting concepts, • Ability to isolate failures within and complete rework of parts and assemblies, • Ability to perform within company quality standard, • Ability to complete pre-defined testing and repair procedures, • Ability to learn and perform basic repairs, • Ability to read and understand routers and OEM manuals, • Language – English, business proficiency, • Experience with borescope Preferred • CFM56 experience, • Quantum aviation software experience, • Language – Spanish, business proficiency If you are interested in the Detail Inspector job in Miami, Florida apply today! This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing; LLC are those of an Employment Agency

Job Description GA Telesis is a global leader providing integrated solutions to the aviation and aerospace industries. We serve over 2,000 customers, including airlines, original equipment manufacturers, maintenance, repair, and overhaul (MRO) providers, and suppliers worldwide, with 31 leasing, sales, distribution, and MRO operations in 19 countries. At GA Telesis, our core business is integrated aviation solutions, and our mission is customer success. The Quality Control Inspector plays a key role in maintaining high-quality standards while complying with GA Telesis processes. The ideal individual should be quality-oriented and attention to detail, self-motivated, reliable, and able to multi-task, to perform each essential duty satisfactorily to meet quality product expectations. This is a full-time position based in Medley, Florida. **Important Notice: Eligibility Requirement: Only U.S. Citizens or Permanent Residents will be considered for this position. Responsibilities: • Perform detailed visual, dimensional, and non-destructive inspections (NDI/NDT) of landing gear components and assemblies, • Inspect incoming, in-process, and final products to ensure compliance with OEM manuals, work instructions, and regulatory standards, • Verify documentation including repair orders, service bulletins, airworthiness directives, and traceability paperwork, • Accurately record inspection findings, discrepancies, and corrective actions taken, • Conduct audits and quality checks throughout the repair process, • Collaborate with engineering and production teams to resolve quality issues and improve processes, • Accomplishes quality and organization mission by completing related results as needed, • Maintain calibration status of measuring tools and test equipment, • Support internal and external audits, including FAA and customer inspections, • High School diploma or GED equivalent required, • 1-2 years Quality Control Inspector experience, • Strong understanding of FAA regulations (14 CFR Part 145), EASA requirements, and OEM maintenance manuals, • Basic knowledge of Microsoft Office (Word, Excel, and Outlook) as well as basic mathematical skills, • Must be able to communicate effectively (oral and written), • Detail-oriented with strong documentation and communication skills, • Ability to read and interpret blueprints, technical drawings, and specifications, • Familiar with Quantum Software., • Previous experience with landing gear systems., • Ability to handle multiple projects simultaneously in a fast-paced environment.Check out how GA Telesis is "Intelligently Defining the FUTURE of Aviation and Aerospace" by following us on LinkedIn, Instagram, Facebook! Powered by JazzHR 8D568C5qBH

Job Description Reports To: Chief Inspector Position Summary The Assistant Chief Inspector (ACI) is responsible for ensuring the quality and compliance of aircraft airworthiness processes. The ACI has the authority to establish and modify policies, procedures, instructions, and information related to Aircraft Airworthiness, Airworthiness Release/Logbook Entry, Required Inspection Items (RII), and Receiving Inspections, as directed by the Chief Inspector. Qualifications The Assistant Chief Inspector must: • Be qualified to exercise control over operations through training, experience, and expertise., • Hold a mechanic’s certificate with both Airframe and Powerplant ratings for a minimum of three (3) years (14 CFR 119.67(d)(1))., • Have at least three (3) years of maintenance experience on large airplanes (10+ passenger seats) with an air carrier or certificated repair station, including at least one (1) year as a maintenance inspector., • Maintain proficiency and currencyin Global Crossing Airlines’ operations through company-approved training programs, continuing education, and on-the-job functions in:, • Aviation safety standards and safe operating practices (14 CFR 119.65(d)(2)(i)), • Federal Aviation Regulations (FARs) (14 CFR 119.65(d)(2)(ii)), • Global X Airlines Operations Specifications (Ops Specs) (14 CFR 119.65(d)(2)(iii)), • Global X Airlines Manuals as required by 14 CFR 121.133 (14 CFR 119.65(d)(2)(v)) Aircraft Conformity and Airworthiness • Approve the addition or removal of aircraft from the Operations Specifications (OpSpecs) following a conformity check., • Assist in maintaining quality control over the Maintenance Ferry Flight process., • Oversee and ensure compliance with Airworthiness Release and Aircraft Logbook Entry processes., • Review, issue, and track Airworthiness Directives (ADs), repetitive inspections, planned modifications, alterations, and changes to aircraft, engines, and components., • Ensure the Minimum Equipment List (MEL) is properly maintained and updated, including Reduced Vertical Separation Minimum (RVSM) limitations per FAA Master MEL guidance., • Submit regulatory reports, including:, • Service Difficulty Reports (SDRs), • Mechanical Interruption Summary Reports (MISR), • Assist with the Aircraft Maintenance Program (AMP), ensuring compliance with regulatory requirements and FAA approval., • Evaluate Technical Operations procedures for effectiveness and recommend revisions through Management of Change (MOC) per MPP 11.12.3., • Maintain the MEL Effectivity Matrix (GCA-CL-TO-325)., • Ensure MEL Effectivityis updated when:, • A new aircraft is added to the fleet, • Supplemental Type Certificates (STCs) or Service Bulletins (SBs) are incorporated, • Assist the Chief Inspector in overseeing Quality Assurance functions and aircraft/component inspections., • Support the Required Inspection Item (RII) process, including:, • Developing and maintaining the RII List, • Oversight of vendor RII processes, ensuring compliance from Essential Maintenance Providers (EMPs), • Assist with the Continuous Analysis and Surveillance System (CASS) and its modification and improvement., • Strong knowledge of FAA regulations, airworthiness requirements, and quality assurance., • Experience in aircraft maintenance oversight and regulatory compliance., • Ability to lead and train personnel in airworthiness procedures., • Proficiency in technical report writing and regulatory submissions., • Effective decision-making and problem-solving skills.

Job Description Who are we? Polyconcept North America (PCNA) is the industry’s biggest and most diverse offering of promotional products and decoration services. At PCNA, we don’t just create products — we inspire brand experiences. Join our team and be part of a company where you can make a mark, build something meaningful, and grow in your career while helping brands leave lasting impressions. What we offer you: • Full healthcare and benefits! The health and wellness of our employees is important to us, that’s why we offer benefits including medical, vision, dental, short-term disability, and more!, • Flexible scheduling, • 401k Matching, • Generous Paid Time Off and Holidays, • We value our employee’s contributions in a collaborative and inclusive work environment, • Our culture encourages listening, understanding and a sense of empathy makes PCNA stronger, • As the industry leader for environmental responsibility, sustainability is the key to every decision we make, • Delight Customers: Treat our customers the way you’d like to be treated., • Think Team: Work together to get the job done. Be inclusive and collaborative., • Own It: Be accountable. Embrace challenges as opportunities, roll up your sleeves and make it happen., • Work Smart: Time is valuable. Focus on the things that can have the biggest impact on our business and customers. Be inquisitive and innovative Leed’s is the premier supplier of high-quality promotional products, with goods ranging from pens and drinkware to bags and mobile tech. Bullet is a leading supplier of low-price promotional products, offering deep inventory, reliable service and 24-hour turnaround. Trimark, a member of PCNA, is a leading developer and manufacturer of logo'd apparel for the Canadian and U.S. promotional industries. Trimark sells logo'd apparel across 6 different categories; Polos, T-Shirts and Tops, Woven Shirts, Knits and Fleece, Jackets, and Accessories, including Headwear. At JournalBooks, we believe in creative minds working together to create something truly unique in journals and planners. ETS has always sought to provide the very best in service, product selection, printing capabilities and competitive pricing, focused on drinkware, ETS offers a broad range of high quality drinkware categories. Spoke’s print-on-demand solutions and premium product assortment are standing by to help expand your inventory and fulfill your event and gifting needs! The Position The Quality Inspector manages tools & information used for inbound product inspections (approval samples, spec changes, PO notes, etc.), performs actual inspections & creates reports to meet AQL (Acceptable Quality Limit) standards. When problems or variances are identified, the Quality Inspector pulls supporting evidence and escalates appropriately. Key Responsibilities: • Prioritization: Review daily inbound shipments, assess needs for same-day product for customer orders & prioritize inspections appropriately, • Perform correct physical inspections on all product categories to meet AQL expectations, • Make educated determinations on product rejection or acceptance, and determine when escalation to Quality management, Product Development/Sourcing, Supply Chain, etc. is appropriate; Suggest corrective actions to issues, • Computer-based activities, • Communicate (electronic and personal) updates on product quality status to internal teams to minimize customer impact, • Read, interpret & verify all information on receiving & quality reports, including item number & color, quantity, dates, and purchase order details, • Complete and verify daily quality reports – written and computer-based – to assure product standards are met & maintained, • Achieve department performance metrics for quality, productivity, and on-time delivery, • Strong knowledge of Leed’s product categories, quality standards and expectations, • Prior experience in Quality Assurance/Control helpful (but not a requirement), • Verbal, written & math skills to understand, finish and communicate inspection results to the Quality Specialist and/or Manager in a professional manner, • Current understanding of Microsoft Excel, Outlook and Word, with the ability to learn & use PCNA system applications (FDM4), • Ability to handle multiple tasks and priorities, with variability from quick turn to tedious projects, and special attention to details, • Work well independently and as part of a team, • Excellent organizational skills & a strong sense of urgency, • High School Diploma or GED, • Bilingual in English and Spanish, • 1-2 years of related warehouse experience, • Capable of lifting 50 lbs and using dollies and pallet jacks, • Standing and walking up to 8 hours per day Together We Inspire Pride We want our team members to be proud of the essential work they do, our commitment to the sustainability, and the overall customer experience. We are a culture that will invest heavily in our people, our company and in state-of-the-art technology to be at the forefront of innovation. PCNA is an equal opportunity employer. PCNA provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics, or any characteristic applicable under state, federal and local laws. Fraud Disclaimer: PCNA is aware of recruitment scams in which individuals are falsely claiming to represent our company and/or our employees. All legitimate communication from PCNA will come from our Applicant Tracking System, LinkedIn Recruiter, or a verified PCNA email address ending in @pcna(.)com. We do NOT conduct interviews via instant messaging platforms like Skype or request sensitive personal information early in the hiring process. If you receive a message that seems suspicious, we recommend verifying its legitimacy and immediately reporting any fraudulent activity.

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Quality Apprentice will work closely with experienced technicians, inspectors, and engineers to learn and develop skills related to the repair of aircraft engines. This hands-on apprenticeship provides the opportunity to gain practical experience, technical knowledge, and professional skills while adhering to safety standards and company procedures. As a Junior Quality Inspector, you will work on improvement projects for the Quality and Inspection teams and assist with various tasks, including parts inspection, tool review and management, kitting, and routine maintenance, while working toward an opportunity to become a Level 1 Inspector or Quality Coordinator within FTAI Aviation. The role requires a level of independence and proactivity while working on specific projects, as well as a strong willingness to learn, attention to detail, and the ability to follow instructions in a fast-paced and safety-conscious environment. Responsibilities: • Perform general inspection, under the guidance of experience Inspectors, of raw materials, in-process components, and finished products to ensure compliance with industry standards., • Support the documentation and management of quality records, including non-conformance reports, corrective actions, and inspection reports., • Perform scripted repair procedure to repair and functionally test parts or tools., • Assist Repair technicians/Engineers/Technical Services/Inspectors as required., • Audit repair documentation for accuracy and completion., • Maintain constant adherence to inventory control practices and procedures., • Interpret OEM manuals and routers instructions., • Work closely with experienced technicians, engineers, inspectors, and supervisors to develop technical expertise., • Maintain a clean and organized work environment daily, ensuring tools and equipment are properly maintained and stored at the end of shifts., • Help with the issuance and filing of documentation of work performed inside of ERP system (Quantum)., • Ad-hoc tasks required for the proper functioning of the shop., • Lead and complete special projects as needed. Qualifications: • High School Diploma or equivalent, • Basic Computer skills (i.e. Microsoft Office Suite), • Mechanical aptitude and willingness to learn., • Ability to read and interpret technical manuals and schematics., • Attention to detail and commitment to safety., • Good problem-solving and teamwork skills., • Self-motivated and reliable., • Proactivity in finding and addressing Quality and Inspection needs., • Proficiency working with hand tools., • Ability to perform within company quality standard, • Must be legally authorized to work in the U.S, • Must be fluent in English (written and verbal) Preferred: • Knowledge of troubleshooting and repair of parts and concepts., • Ability to read and understand routers and OEM manuals., • Basic knowledge of aircraft engines and mechanical systems. Career Path & Opportunities: Successful trainees may advance to: • Level 1 MRO/ETC Technician, • Detailed/Surveillance Inspector, • Materials Coordination, • Records Clerk, • Supply Chain / Warehouse Associates Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Job Description CHP is currently initiating a search for a CEI Senior Roadway Inspector for our CEI projects in Southeast Florida. Be a part of a growing organization that meets our client’s objectives and solves their challenges. Responsibilities • Monitoring on-site construction activities, • Inspecting materials in accordance with clients scope of services (plans, specifications, and special provisions). Transporting samples to be tested in a Department laboratory or appropriate facility, • Maintaining detailed accurate records of daily operations and significant events. Fulfilling other duties as needed., • Preparing inspection reports, • Monitoring and inspecting the Work Zone Traffic Control (in accordance with the client"s requirements), • Exercise responsible and ethical decision-making regarding company funds, resources and conduct., • Responsible for managing subordinate inspection staff and delegating responsibilities, as well as training/teaching them., • High School Diploma., • Minimum of 5 years of relevant post education experience in discipline with prior construction inspection experience., • Valid state driver’s license., • Highly familiar with construction inspection principles, field inspection practices, process, methods and techniques., • Highly familiar with relevant construction codes, regulations, compliance practices, and record-keeping requirements., • Sound interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to a technical and non-technical audience., • Sound self-leadership with attention to detail, accuracy, multi-tasking, and prioritization of responsibilities in a dynamic work environment., • Ability to learn new techniques, perform multiple tasks simultaneously, follow instruction, and comply with company policies., • Ability to work independently with minimal supervision, as well as part of a team to meet business objectives., • Analytical mindset to exercise sound judgement in evaluating situations and making decisions., • Basic proficiency with technical writing, office automation, software, technology, spreadsheets, and tools., • Ability to provide input and feedback to others in the field such as subcontractors and work colleagues to consistently complete tasks safely, efficiently, and accurately according to specifications., • Proven track record of upholding workplace safety and ability to abide by WSP’s health, safety and drug/alcohol and harassment policies., • Ability to work schedules conducive to project-specific requirements that may extend beyond the typical workweek., • Associate’s Degree in closely related discipline is preferred., • Essential professional licensure/certifications, • CTQP Concrete Field Inspector Level I, • CTQP Asphalt Roadway Level I and Level II, • CTQP Earthwork Construction Inspection Level I and Level II, • CTQP Drilled Shaft Inspection (required for inspection of all drilled shafts including miscellaneous structures such as sign structures, lighting structures, and traffic signal structures), • CTQP Final Estimates Level I, • IMSA Traffic Signal Technician Level I, • FDOT Advanced MOT Certification, • Required Education: High School Diploma / GED, • Minimum Years Experience: 5 years Salary: $66,560.00 - $80,000.00 per year Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Professional development assistance, • Referral program Schedule: • 8 hour shift, • Night shift, • Overtime, • Weekend availability Supplemental pay types: • Bonus pay, • Signing bonus Experience: • FDOT CEI: 5 years (Preferred) License/Certification: • Driver's License (Required), • Engineer In Training (Preferred), • Professional Engineer (Preferred) Work Location: Miami-Dade, Broward, Palm Beach

Job Description TITLE: QC Inspector - HRL REPORTS TO: Manager, QC. Overview: The QC Inspector is responsible for performing inspection functions in accordance with Global X’s Continuous Airworthiness Maintenance Program (CAMP) and FAA regulations. This role ensures that parts, materials, maintenance, and workmanship meet Global X standards, while monitoring performance measures through audits of internal and vendor organizations. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: • Perform Line Maintenance, Remain Overnight (RON), and Receiving Inspections (RI)., • Monitor maintenance, workmanship, and materials for compliance with Global X procedures and FAA standards., • Perform RII in-process inspections and ensure proper documentation., • Audit completed aircraft records (logbooks, work cards, non-routines, engineering documents, etc.) generated by C-Check, RON, and Line Maintenance., • Provide oversight during Heavy or Special Maintenance visits., • Perform Borescope inspections within qualified method and level., • Ensure accuracy and completeness of all work documents and records., • Initiate discrepancies in maintenance logbooks and non-routine forms., • Provide “buy-back” of RII and non-RII maintenance actions., • Approve return-to-service of maintenance, preventive maintenance, and alterations., • Issue Airworthiness Releases (AWR)., • Reject unsatisfactory work or non-conforming parts per procedures., • Prepare and issue audit reports identifying hazards/risks, corrective actions, and track resolution progress., • Conduct inspections and audits of contractors/vendors (e.g., repair/overhaul services, contract maintenance, deicing, fueling, and parts distributors)., • Follow all safety rules to maintain a safe working environment., • Perform other duties as assigned by the DOM/DQC. SKILLS AND QUALIFICATIONS: • Knowledge of the TRAX system., • Valid FAA A&P license, held for at least 5 years., • Previous verifiable inspection experience (OJT, training records, certificates, etc.), including RII Authorization., • Preferred: prior experience with NDT methods such as Liquid Penetrant, Eddy Current, and Borescope inspections., • Strong analytical, problem-solving, and communication skills. This position is based in Harlingen, TX. The standard schedule follows a four-days-on, three-days-off rotation with 10-hour shifts. Work hours and shift assignments may vary, and the schedule is subject to change based on operational needs. Flexibility is required to support the demands of a dynamic aviation maintenance environment. PHYSICAL DEMANDS: The QC Inspector role is performed in a safety-sensitive aviation environment that includes both office settings and aircraft maintenance areas, such as hangars, line stations, and ramp operations. The position requires frequent exposure to varying weather conditions, noise levels, and physical activities associated with aircraft inspections. QC Inspectors must be able to stand, walk, bend, climb, and climb into confined spaces as needed to access aircraft structures and components. The role also involves extended periods of reviewing technical documents and records. Strict adherence to safety protocols and regulatory requirements is essential to maintain a safe and compliant work environment. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description GA Telesis is a global leader providing integrated solutions to the aviation and aerospace industries. We serve over 2,000 customers, including airlines, original equipment manufacturers, maintenance, repair, and overhaul (MRO) providers, and suppliers worldwide, with 31 leasing, sales, distribution, and MRO operations in 19 countries. At GA Telesis, our core business is integrated aviation solutions, and our mission is customer success. The Quality Control Inspector plays a key role in maintaining high-quality standards while complying with company processes at our Component facility in Miami. This position is responsible for performing incoming and outgoing inspections of aircraft parts and materials, along with required production procedures. Reporting to the Director of Quality and Engineering, the ideal individual will be quality-oriented, attentive to detail, self-motivated, reliable, able to multi-task and to perform each essential duty satisfactorily to meet quality product expectations. Responsibilities: • Conduct a complete vision inspection of all incoming parts and materials, including inspecting items being shipped, • Ensure products meet company standards before they are sent out or placed on the inventory shelves, • Handling material with necessary precaution and in accordance with requirements for safe handling, • Review material specifications to compare to inventory parts, • Ensures production and processes adhere to standards with legal requirements, • Accomplishes quality and organization mission by completing related results as needed, • Inspects in-process production by confirming specifications, conducting visual inspection, and communicating required adjustments to the production department, • High School diploma or GED equivalent, • Airframe and Powerplant License required, • 1-2 yrs. Quality Control Inspector experience, • Familiar with ATA106 and ATA300 Specifications, • Familiar with ISO9001, AS9120 and ASA-100 standards, • Familiar with procedures for completion of ATA106 certificate, • Familiar with procedures for Maintenance Release certificates such as 8130’s, EASA Form One, Canadian Form one, etc., • Basic knowledge of Microsoft Office (Word, Excel, and Outlook) as well as basic mathematical skills, • Must be able to communicate effectively (oral and written), • Familiar with Quantum Software, • Ability to handle multiple projects simultaneously in a fast-paced environmentCome check out how #gatelesis is "Intelligently Defining the FUTURE of Aviation and Aerospace" To see what #GATelesis life is like, visit LinkedIn, Instagram, Facebook. Powered by JazzHR 0jEcJCTbaB

Job DescriptionDescription: Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities • Preparation of the QC Labeling areas as specifically described in SOPs., • Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements., • Combines components for final products., • Applies labels to final product and adds package inserts, boxes, etc., • Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature)., • Performs disposition of nonconforming products as directed., • Coordinates and stages products for sterilization., • Monitors freezers and responds to alarms., • Supports nonconformance investigations, when applicable., • Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue., • Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues., • Performs other duties as assigned by management. Requirements: Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

Job Description GA Telesis is a global leader providing integrated solutions to the aviation and aerospace industries. We serve over 2,000 customers, including airlines, original equipment manufacturers, maintenance, repair, and overhaul (MRO) providers, and suppliers worldwide, with 31 leasing, sales, distribution, and MRO operations in 19 countries. At GA Telesis, our core business is integrated aviation solutions, and our mission is customer success. The Quality Control Receiving Inspector plays a key role in maintaining high-quality standards while complying with GA Telesis processes. Reporting to the Senior Manager of Quality Control and Projects, the ideal individual should be quality-oriented with attention to detail, self-motivated, reliable, and able to multi-task, to perform each essential duty satisfactorily to meet quality product expectations. This is a full-time position, 2nd shift, based in Medley, Florida. Responsibilities: • Perform detailed visual, dimensional, and non-destructive inspections (NDI/NDT) of landing gear components and assemblies., • Inspect incoming, in-process, and final products to ensure compliance with OEM manuals, work instructions, and regulatory standards., • Verify documentation including repair orders, service bulletins, airworthiness directives, and traceability paperwork., • Accurately record inspection findings, discrepancies, and corrective actions taken., • Conduct audits and quality checks throughout the repair process., • Collaborate with engineering and production teams to resolve quality issues and improve processes., • Accomplishes quality and organization mission by completing related results as needed, • Maintain calibration status of measuring tools and test equipment., • Support internal and external audits, including FAA and customer inspections., • High School diploma or GED equivalent required., • 1-2 years Quality Control Inspector experience., • Strong understanding of FAA regulations (14 CFR Part 145), EASA requirements, and OEM maintenance manuals., • Basic knowledge of Microsoft Office (Word, Excel, and Outlook) as well as basic mathematical skills., • Must be able to communicate effectively (oral and written) ., • Detail-oriented with strong documentation and communication skills., • Ability to read and interpret blueprints, technical drawings, and specifications., • Familiar with Quantum Software., • Previous experience with aviation components, wheels and brakes a plus., • Ability to handle multiple projects simultaneously in a fast-paced environment.Come check out how #gatelesis is "Intelligently Defining the FUTURE of Aviation and Aerospace" To see what #GATelesis life is like, visit LinkedIn, Instagram, Facebook. Powered by JazzHR eyB658RJHh

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Detail Inspector works in accordance with the current technical data provided in the manufacturer’s instructions for continued airworthiness service bulletins, service letters for performing preliminary hidden-damage, in-process and final inspections on civil aviation on aviation airworthiness directives, government and industry-standard practices, and other data acceptable to or approved by the FAA. Shift Schedule: 2:30pm - 11:00pm Responsibilities: • Ensuring that they are thoroughly familiar with the inspection methods, techniques, aids, tools, and equipment used within their assigned area of responsibility., • Maintaining proficiency in using the inspection aids in their assigned area of responsibility Understanding the current specifications involving inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Ensuring that the inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Understand the current specifications involving inspection tolerances, limitations, and procedures established by the manufacturer of the article being inspected and must understand, speak, and write the English language., • Ensure all inspections are properly performed and recorded, and all records are properly executed before final approval for return to service of articles maintained or altered by this repair station., • Perform disassembly and repair of all types of aircraft engine usable parts, • Assist with the reconfiguration or reconditioning of equipment, • Perform scripted test procedures to isolate the failure to sub-assembly and/or component level, • Perform scripted repair procedure to repair and functionally test part or product, • Assist Repair Technicians/Engineers/Technical Services as required, • Maintain constant adherence to inventory control practices and procedures, • High School or equivalent, • Hold and airframe and/or powerplant license, • Must possess exceptional attention to detail, • Basic PC knowledge, • Proficiency in working with all hand tools and pneumatic tools, • Ability to isolate failures within and a complete rework of parts and assemblies, • Ability to perform within company quality standard, • Must be legally authorized to work in the U.S, • Knowledge of troubleshooting and repair of parts and concepts preferred, • Some knowledge of troubleshooting concepts, • Ability to learn and perform basic repairs Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. Shift schedule: 2:30pm-11:00pm

Job DescriptionAre we the road to your future? We are currently searching for experienced Senior level and entry level CEI Inspectors to support our Southeast Region located in the state of Florida. To be considered for this position, applicants must have, at minimum, a high school diploma or equivalent. What you’ll be doing: • Making and checking engineering computations, • Inspecting construction work, • Conducting field tests, • Writes daily inspection reports, performs verification testing, and documents test results and observations, • Assists in all types of record keeping and field measurements, as needed, • Work is performed under the general supervision of the Project Administrator What you need to have: • High School Diploma or equivalent, • An Engineer Intern with a Civil Engineering Degree, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana, Please note that federal regulations may differ from state-specific guidelines. Valid driver's license., • A satisfactory motor vehicle report (MVR). Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-DNI

Job Description CEI Senior InspectorPosition Overview KEITH is seeking a CEI Senior Inspector to join our team. This role involves performing highly complex technical assignments in field surveying and construction layout, making and checking engineering computations, inspecting construction work, and conducting field tests. The CEI Senior Inspector will also be responsible for coordinating and managing lower-level inspectors. Work is performed under the general supervision of the Project Engineer/Administrator. Key Responsibilities: • Conduct detailed inspections of bridge and roadway construction projects (excluding Complex Category 2 (CC2) bridge structures)., • Perform field surveying and construction layout tasks, ensuring compliance with plans, specifications, and applicable regulations., • Perform and verify engineering computations and field tests related to construction materials and quality control., • Manage, coordinate, and provide guidance to lower-level inspectors., • Ensure that all work aligns with FDOT standards and project requirements., • Document inspection findings and prepare reports for project oversight.Preferred Certifications:, • CTQP Drilled Shaft Inspection Certification, • IMSA Traffic Signal Technician Level I Certification., • CTQP Concrete Field Inspector Level I Certification, • CTQP Asphalt Paving Level I & Level II Certifications, • CTQP Earthwork Construction Inspection Level I & Level II Certifications, • CTQP Final Estimates Level II Certification, • FDOT Advanced Temporary Traffic Control (TTC) Certification, • Nuclear Radiation Safety Certification, • Florida Stormwater, Erosion, and Sedimentation Control Inspector Training and CertificationWhat you'll need:, • High school diploma or equivalent., • At least five (5) years of experience in construction inspection., • At least two (2) years of experience in bridge and/or roadway construction inspection., • Strong knowledge of FDOT construction standards and specifications., • Experience working with contractors and engineers to resolve field-related issues., • Strong organizational and leadership skills., • 100% PAID Medical, Dental, and Vision, • Employer matched 401K - 100% Vested on Day 1 of contribution!!!, • Paid Parental leave and Life Insurance, • PTO, Holidays, and more! ... Powered by JazzHR AnvBSjT4X7

Job Description We are currently recruiting for a Detail Inspector job in Miami Florida. You’ll be working with a company that performs full CFM56 performance restorations, special repairs, piece parts and module repairs as well as engine exchanges and field service support globally. They are a high-performance FAA 145 / EASA Certified Repair Station and a CASE registered organization. They specialize in offering creative and cost-effective solutions for the CFM56 (-7B, -5B, -3) Engine Series by maintaining its 3 cornerstones – Custom Tailored Solutions, Extraordinary Responsiveness and World Class EGT Margins. What Is In It For You Salary: $30-$40 hour (depending on relevant experience) Benefits: Health, Dental and Vision insurance; Life insurance; Short term and long-term disability; Aflac supplemental insurance; Paid vacation and sick days; Paid holidays; 401k with employer match OUR CLIENTS STORY Our client has been established since 2009 and has had a breakthrough in the jet engine maintenance industry serving airlines, lessors, and aviation organizations worldwide. Being part of this company means having opportunities to make a difference. They are committed to Quality and continually invest in people, processes and technology in support of this. They place great priority in their employees and building up their team members. They are committed to building their employees and growing them to become great leaders. This adds tremendous value not only to their organization, but also to their community and to everyone that is touched by the passion their workforce has to offer. JOB DESCRIPTION The Inspector will follow articles in accordance with the current technical data provided in the manufacturer’s instructions for continued airworthiness service bulletins, service letters for performing preliminary hidden damage, in process and final inspections on civil aviation on aviation airworthiness directives, government and industry standard practices and other data acceptable to or approved by the FAA. ESSENTIAL JOB FUNCTIONS FOR THE DETAIL INSPECTOR POSITION IN MIAMI,FL: A Day In The Life of a Detail Inspector: • Ensuring that they are thoroughly familiar with the inspection methods, techniques, aids, tools and equipment used within their assigned area of responsibility., • Maintaining proficiency in using the inspection aids in their assigned area of responsibility Understanding the current specifications involving inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Ensuring that the inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Understand the current specifications involving inspection tolerances, limitations and procedures established by the manufacturer of the article being inspected and must understand, speak and write the English language., • Ensure all inspections are properly performed and recorded, and all records are properly executed before final approval for return to service of articles maintained or altered by this repair station., • Successfully replace failed sub-assembly, part, or component to bring failed device to working order, • Perform scripted repair procedure to repair and functionally test part or product, • Assist Repair technicians/Engineers/Technical Services as required, • Maintain constant adherence to inventory control practices and procedures, • Interpret OEM manuals and routers instructions Qualifications Required • Powerplant License required, • Good written and verbal communication skills, • Knowledge of troubleshooting and repair of parts and concepts preferred, • Proficiency working with all hand tools and pneumatic tools essential, • Some knowledge of troubleshooting concepts, • Ability to isolate failures within and complete rework of parts and assemblies, • Ability to perform within company quality standard, • Ability to complete pre-defined testing and repair procedures, • Ability to learn and perform basic repairs, • Ability to read and understand routers and OEM manuals, • Language – English, business proficiency, • Experience with borescope Preferred • CFM56 experience, • Quantum aviation software experience, • Language – Spanish, business proficiency If you are interested in the Detail Inspector job in Miami, Florida apply today! This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing; LLC are those of an Employment Agency

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Inspector articles in accordance with the current technical data provided in the manufacturer’s instructions for continued airworthiness service bulletins, service letters for performing preliminary hidden-damage, in process and final inspections on civil aviation on aviation airworthiness directives, government and industry standard practices and other data acceptable to or approved by the FAA. Responsibilities: • Ensuring that they are thoroughly familiar with the inspection methods, techniques, aids, tools and equipment used within their assigned area of responsibility., • Maintaining proficiency in using the inspection aids in their assigned area of responsibility Understanding the current specifications involving inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Ensuring that the inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Understand the current specifications involving inspection tolerances, limitations and procedures established by the manufacturer of the article being inspected and must understand, speak and write the English language., • Ensure all inspections are properly performed and recorded, and all records are properly executes before final approval for return to service of articles maintained or altered by this repair station., • Perform disassembly and repair of all types of aircraft engine usable parts, • Assist with the reconfiguration or reconditioning of equipment, • Perform scripted test procedures to isolate failure to sub-assembly and/or component level, • Successfully replace failed sub-assembly, part, or component to bring failed device to working order, • Perform scripted repair procedure to repair and functionally test part or product, • Assist Repair technicians/Engineers/Technical Services as required, • Maintain constant adherence to inventory control practices and procedures, • High School or equivalent and basic computer skills, • Airframe and/or Powerplant license, • Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance., • 3 – 5 years experience in a lead role for an aircraft jet engine maintenance., • Experienced with borescope inspection and interpretation of technical data during the borecope process., • Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine., • Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner., • Be able to read, write, speak, and understand the English language. Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Job Description Inspected incoming items for SN, PN and process inspection of the repair parts (FAA Inspecting a varieties of finish parts to ensure conformance with specifications and quality establish quality standards. Proficient in the use of but not limites to all standard inspection tools including calipers, micrometer,comparators, CMM, Automated Vision Systems, height gages. Demonstrated computer skills including basic proficiency in MS Outlook, MS Word and Excel. Electrical knowledge.(+) Bilingual Great Communication and interpersonal skill and the ability to work in a team. Company DescriptionFAA Repair Station (Repair Electrical Components)FAA Repair Station (Repair Electrical Components)

Job DescriptionJob Summary: Sparks Group is partnering with a leading Aviation company in order to fill multiple Product Acceptance/ Quality Inspection openings. Ideally we are looking for someone to help make sure the airplane parts and products produced meet all design and quality standards. This position is 100% on site Monday thru Friday business hours. If you have the required experience please apply for immediate consideration. Key Responsibilities: * Check parts and materials to make sure they meet design and quality requirements. * Keep records of inspection results as proof that everything was checked properly. * Identify and report any problems or defects in parts or materials. * Set aside any parts that don’t meet standards and help decide what to do with them. * Review paperwork to make sure it’s correct and matches quality standards. * Use tools like calipers, micrometers, and gauges to measure parts accurately. * Perform both visual checks (looking for obvious damage or defects) and detailed measurements. * Work with vendors and customers to resolve quality issues. * Support and mentor other inspectors as needed. * Hold special quality certifications (or "stamps") from at least three customers, showing you're qualified to inspect products for them. What We’re Looking For: * At least 2 years of experience in quality inspection, ideally in a manufacturing or aerospace environment. * Comfortable using precision measurement tools like calipers, pin gauges, and comparators. * Experience doing First Article Inspections (checking the first part off the production line). * Good computer skills, especially with Microsoft Excel and Outlook. #LI-DA2 This job is In-Person. We offer several comprehensive benefits package including health and life insurance, paid and unpaid time off, and retirement and savings plans to qualifying employees. Download the Sparks Group mobile app from Apple App Store or Google Play. Sparks Group is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, pregnancy, citizenship, family status, genetic information, disability, or protect veteran status.

Job Description Actively hiring a Quality Receiving Inspector on first shift in Miami, FL! If you have experience working as a receiving quality inspector in an medical or aerospace industry, email me directly at chsamson@aerotek .com Job Description: • Perform product inspections, including thorough inspection and data collection of incoming materials., • Measure key quality characteristics of products, analyze shipment trends, perform visual inspections, and ensure that all quality specifications are met., • Responsibilities also include training and providing guidance to other inspectors, ensuring all products conform to established Quality Assurance, • Monday - Friday Schedule; OT available, • Long term Opportunity, • Opportunity for growth EMAIL; CHSAMSON@AEROTEK .COM Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Miami,FL. Application Deadline This position is anticipated to close on Oct 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description For almost 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. We're actively seeking a Quality Inspector- FAI for an immediate opening in Maimi, FL. The role is full-time, Monday through Friday. Key responsibilities: • Report to the team leader daily in an office/shipping environment., • Complete First Article Inspections ensuring accurate and complete reports., • Complete FAI reports and reach out to suppliers to correct errors., • Operate within client Quality Management System (QMS)., • Reach out to suppliers and determine the best course of action with escapements., • First Article Inspection Experience (FAI), • Strong attention to detail and adherence to inspection plans and protocols., • Ability to interpret basic engineering drawings., • Proficient in Microsoft Office with strong communication skills., • Experience with AS9102 Form 1,2,3., • GD&T (Geometric Dimensioning and Tolerancing) per ASME Y14.5 standards., • Fluent in reading and writing English., • Must be able to meet ITAR requirements and undergo a background check, • Certified or previously certified in GD&T ASME Y-14.5, • Diploma or GED from an accredited high school or technical school; college degree in engineering, • Knowledge of mechanical contract manufacturing and LEAN manufacturing Must be ITAR compliant and undergo a background check. Company DescriptionSQA Services is a leading Supply Chain and Quality Assurance consulting firm specializing in the management of Supplier Audit, Quality Engineering, Inspection, and Remediation programs in the Aerospace/Defense, Semiconductor, Medical Device, Pharmaceutical, Cosmetic, and Automotive manufacturing industries. Clients leverage our network of quality professionals in more than 50 countries as an extension of their own supplier quality teams.SQA Services is a leading Supply Chain and Quality Assurance consulting firm specializing in the management of Supplier Audit, Quality Engineering, Inspection, and Remediation programs in the Aerospace/Defense, Semiconductor, Medical Device, Pharmaceutical, Cosmetic, and Automotive manufacturing industries. Clients leverage our network of quality professionals in more than 50 countries as an extension of their own supplier quality teams.

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Inspection Supervisor is responsible for the oversight of the assigned Inspection teams, performing preliminary, hidden-damage, in-process, and/or final Inspections. The Inspection Supervisor performs and oversees return to service functions on all civil aviation articles in accordance with the current technical data provided in the OEM for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: • Supervise, coordinate, and prioritize inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station., • Supervise inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed., • Ensure work performed by outside sources and incorporated in articles undergoing maintenance, preventive maintenance, or alteration was properly performed and documented., • Ensure all inspection paperwork is audited for completeness, task compliance, and delivered finalized documents to Records Department., • Review teams’ competencies and oversee the training of new and current inspectors., • Oversee the work performed by Inspectors who are unfamiliar with the methods, techniques, practices, and equipment used to perform maintenance, preventive maintenance, or alterations., • Lead Root Cause Analysis for nonconformances and audit corrective actions, including installed parts/material tags, tools and equipment used, proper signoff and references., • Carry out performance evaluation of the assigned teams as per current HR guidelines and policies., • Powerplant License under part 65, • 5-10 years of Experience as an Inspector in MRO., • Understand, read, and speak English, • 3 years in a Leadership or Supervisory role. Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Miami, FL Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job Description Crane Service Technician Location: Miami, FL | Full-Time | Reports to: Service Supervisor / Service Manager What You’ll Do As a Crane Service Technician at Mazzella, you’ll be on the front lines—helping customers by maintaining, repairing, and inspecting overhead cranes and hoists at their facilities. You'll troubleshoot electrical, mechanical, and structural issues, ensuring equipment is safe and working properly. This is a hands-on, customer-facing role that requires both technical expertise and strong people skills. Your day-to-day will include: • Performing on-site repairs and inspections on overhead crane and hoist systems, • Responding to emergency service calls, including after-hours and weekends (as needed), • Troubleshooting electrical and mechanical systems using testing tools and visual inspection, • Following all OSHA, ANSI, CMAA, and industry safety standards, • Communicating with customers, explaining your work, and getting sign-off, • Completing accurate service reports, time sheets, and inspection forms, • Keeping your tools, vehicle, and parts inventory in good order, • High school diploma or technical/vocational training in electrical or mechanical fields, • 2+ years of hands-on experience in overhead crane or hoist repair, 4+ years preferred, • Strong skills in troubleshooting VFDs, brakes, motors, gearboxes, and control panels, • Familiarity with OSHA, CMAA, ANSI standards, • Valid driver’s license in good standing, • Comfortable with heights, lifting heavy parts (75+ lbs), and varied work hours, • Good computer skills (e.g., Microsoft Office) and ability to complete paperwork accurately, • Strong communication and customer service skillsBonus Points For:, • Overhead Crane Inspector certification (Level 3+), • Experience supporting sales or quoting repair work, • Competitive pay + overtime opportunities, • Comprehensive benefits – health, dental, vision, life, disability, and 401(k) with company match, • Paid time off + paid holidays, • Free virtual doctor visits (Teledoc – $0 copay), • Tuition reimbursement – keep learning and we’ll support you, • Career growth – development programs and internal promotions, • A culture built on respect, teamwork, and integrityOur Core Values, • Be Safe – We prioritize everyone's well-being, • Be a Lifelong Learner – We never stop growing, • Be Humble – We win as a team, • Be Hungry – We go above and beyond eLUCW1Arin

Job DescriptionSalary: POSITION SUMMARY Oversee the scheduling, coordination, and execution of field crew activities. Supervise and coordinate onsite field operations and associated Subcontractors and Vendors. Provide input towards the development of the project schedule. Adhere to the project schedule and orchestrate timely project completion within budget. Cooperate with the Project Manager and maintain open lines of communication regarding matters concerning Safety, Project budget, Productivity, Change Orders, Quality Control, and Customer Satisfaction. ESSENTIAL FUNCTIONS Reasonable Accommodations Statement Oversee all aspects of mechanical (fuel) related projects, including installation, modification, and demolition of fuel underground/aboveground tanks and large/small diameter piping, hydrant fuel piping, hydrant pits, drain downs, pigging, flushing, and civil related aspects of projects, including concrete demolition and placement and dewatering; Essential Functions: • Develop a Master Plan approach for the project., • Execute, supervise, and maintain project manpower, milestone schedules, and material orders., • Practice, promote, and develop mentoring of all trades and manpower levels., • Enforce and implement the dictates and recommendations of the EHS Department., • Complete all documentation required in the Health and Safety Plan., • Consider and implement all EHS Requirements in the Planning and Coordination Phases., • Document and ensure any required corrective measures are addressed and implemented., • Review all daily and weekly scope of work activities with the Project Managers., • Requisition, maintain, and account for tools, materials, and equipment with Fleet and Project Management., • Monitor progress, performance, and quality of work for all Subcontractors and major Equipment Suppliers., • Coordinate all required inspections with the Project Foreman and maintain good working relationships with inspectors., • Review, analyze, and update Labor Hours/Job Costs Report information with project management on a weekly basis., • Optimize project opportunity by field/pre-fabrication planning, BIM, organizing, and scheduling, without compromising the quality, safety, or completion date of the project., • Assist project management with schedule preparation, including logic and resource/budget allocation, Labor Resource Charts, and provide updates as required., • Keep proper and complete documentation of the project as required and available for inspection at all times., • Provide required training, mentoring, coaching, and leadership for field personnel. Participation in company-provided training., • Ensure accurate and complete cost coding of all time cards daily. Review, sign off, and forward time cards to the corporate office as required., • Oversee all tradesmen at the project site, including, but not limited to, Pipefitters, Welders, Heavy Equipment Operators, General Construction personnel, Environmental technicians, and all Subcontractor personnel (Electricians, Start-up technicians, etc.), • Ensure efficient project closeout, including completion of all punch list work, owner training and instruction, transfer of spare parts, final cleanup, As-Built plans, demobilization, and project records archiving. POSITION QUALIFICATIONS Competencies: • Strong written and oral communication skills., • Ability to understand Contract plans and specifications., • Ability to perform accurate estimating and takeoffs for mechanical/civil systems., • Strong organizational skills and habits, • Positive attitude and ability to work in a high-paced environment., • Ability to solve problems and present solutions., • History and ability to maintain high attendance and punctuality., • Traffic Control and work at Airports and Federal Government Facilities is a Plus, • Knowledge of Proper Use of Survey Equipment SKILLS & ABILITIES Education: • High school graduation or equivalent required. Experience: • Minimum 5 years of previous experience in this position. Computer Skills: • Computer literate with good working knowledge of Microsoft Word and Excel., • Complete Daily reports / JSAs / Toolbox meeting, • Ability to send and receive email., • Ability to complete online time reporting, including preparation of Certified Payroll sign-in., • Handle and transmit Project Photos on a scheduled basis., • Ability to complete online training Certificates & Licenses: • OSHA 30-HOUR Construction, • OSHA 40-HOUR HAZWOPER, a plus, • Florida Advanced Traffic Control Supervisor, a plus, • Florida Stormwater Inspector, a plus, • NCCER Accreditation desired, • FDOT CTQP Certifications as applicable Other Requirements: • Drivers License, • Competent Person Lockout/Tagout, Confined Space, and Trenching and Excavation procedures in a safe manner., • Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards PHYSICAL DEMANDS • Hearing and vision within normal ranges are essential for normal conversations, receiving ordinary information, and preparing, inspecting, or reviewing documents., • Frequent walking and climbing (stairs, ladders, terrain), • Frequent lifting (up to and including 50 pounds), • Frequent bending, twisting, and standing, • Exposure to working outdoors in all-weather conditions, • Ability to work more than 40 hours in any given week, including weekend assignments as required Other Physical Requirements: Must wear steel-toed boots, must wear protective eye-wear, hearing protection, may work in outdoors during inclement weather, ability to travel by car or plane, high frequency of computer keyboarding, high frequency of viewing a computer monitor, etc. WORK ENVIRONMENT Work is performed in outdoor settings and industrial settings, in all weather conditions, including temperature extremes, during the day and night shifts. Work is often performed in emergency and stressful situations. This job description is subject to change at any time.

Commercial and personal line insurance carriers rely on EXL as a key business partner through our Castle High Value and EXL Risk Control service offerings. We offer a variety of field inspections and risk control services to support our clients’ underwriting processes. EXL’s consultants deliver industry-leading professionalism, quality and turn-around time, and our innovative solutions help our clients keep ahead of the competition. ___ Commercial and personal line insurance carriers rely on EXL as a key business partner through our Castle High Value and EXL Risk Control service offerings. We offer a variety of field inspections and risk control services to support our clients’ underwriting processes. EXL’s consultants deliver industry-leading professionalism, quality and turn-around time, and our innovative solutions help our clients keep ahead of the competition. Job Description EXL Risk Control is looking for self-directed independent contractors who possess excellent communication skills, computer proficiency, and a commitment to meeting client quality and timeliness standards. You will work from your own home or office, and service onsite survey/inspection assignments in the Miami / Miami Beach, FL area, and other locations within approximately 35 miles of Miami and Miami Beach. Responsibilities You will be responsible for scheduling on-site surveys and providing risk control reports to insurance industry clients. These reports contain information necessary to underwrite a commercial insurance policy and may include recommendations to control and/or correct potential loss producing conditions associated with that policy. You will be expected to manage assignments you accept, successfully secure customer appointments within a local territory and complete work assignments on time. Our Risk Control Inspectors evaluate businesses behind the scenes to identify hazards and improve safety, mitigating risks for our insurance company clients. The type of businesses we survey are commercial operations, including retail, restaurants, hotels, apartments, construction jobsites, churches, schools, etc. Most surveys are focused on assessing the business for Property and General Liability coverage, but we also service other commercial insurance lines of business including Workers Compensation, Auto/Fleet, Products Liability, Inland Marine and Builders Risk. Qualifications Preferred experience in commercial insurance, real estate, inspection, construction, claim, loss control, underwriting, and/or fire and safety experience is a plus, but all interested candidates are encouraged to submit their qualifications. In lieu of experience, we can refer you to a 15-hour online certification option to qualify you. Fees are negotiable depending on experience and the unique aspects of selected jobs. Tools or Items You Must Provide: • Digital camera or tablet, • Computer, • Printer, • High speed internet access, • Reliable vehicle, • Measuring device such as a laser, 100 ft. tape, or measuring wheel, • Auto and General Liability Insurance All interested candidates are encouraged to apply.

Job Description Position: Certified Welding Inspector (CWI) Location: Miami/Ft. Lauderdale (16200 NW 59th Ave. Ste. 106 I Miami Lakes, FL 33014) Interview Process: 9/30 2-4pm; 10/3 10-12pm Must haves: • Minimum of 2-4 years' experience as an Engineering Technician or similar experience, • CWI certification, • HS Diploma, • 1+ years in construction inspection, • Associates degree or higher in Civil Engineering or Construction Engineering Technology, • NDT - nondestructive testing certification is a huge plus Insight Global is seeking a Certified Welding Inspector to sit in Miami, Florida for a growing and profitable office situated in a rapidly growing region. Key responsibilities will include daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications. Inspections may cross multiple inspection disciplines or within a specified area of expertise including structural steel, concrete, masonry, fireproofing, etc. Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications. Prepare inspection reports and provide written documentation of observations and testing materials. Communicate findings to the engineer or project manager and when requested collaborate with the project team on solutions to potential issues. Adhere to strict safety standards.

Job Description TITLE: Manager Quality Control REPORTS TO: Director, Quality Control & Chief Inspector OVERVIEW: Monitor the performance measures of the CAMP by performing audits of internal and vendor organizations. The Quality Assurance Auditor is responsible for performing audits as required by Federal Aviation Regulations (FAR) 121.373. The Auditor performs reviews and audits internal programs and external business partners’ facilities as well as their policies and procedures. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: • Monitor maintenance, workmanship, and materials to verify compliance with the applicable approved published procedures of GlobalX and FAA rules, regulations, and standards., • Audit completed aircraft records (e.g., logbook pages, work cards, non-routines, Engineering documents (EO’s, EAs, etc.) and other related documents) generated by C-Check, RON, and Line maintenance., • Ensure accuracy and completeness of all assigned work documents and records., • Prepare and issue audit reports regarding the hazards and risks found during audits of the CAMP and identify required corrective actions needed to transfer, eliminate, accept, and/or mitigate these risks and monitor progress toward completion of these actions., • Perform inspections and audit contractor activities in support of CAMP required at Line Stations, including vendors of repair and overhaul services, contract maintenance, deicing services, fueling services, and parts distributor., • Follow all safety rules and regulations to maintain a safe working environment for all employees., • Assist Quality Department with continuous improvement projects and duties as needed., • Plan, schedule, and conduct internal and external audits for the following: Line Station, Fuel Farm, Fuel Into-Plane, Essential Maintenance (Operations Spec D91), Repair Station. SKILLS AND QUALIFICATIONS: • High School Diploma or General Education Development (GED) Diploma., • Previous auditing experience in the 121 Air Carrier or Military Department of Defense (DOD) auditing environment., • Superior analytic, problem solving and communication skills., • Previous experience with aircraft parts and materials handling., • Thorough working knowledge of Federal Aviation Regulations., • Available for occasional overnight travel. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Chief Inspector is responsible for the oversight of the assigned Inspection teams at FTAI Aviation USA locations, MRO, ETC, and EMT, performing preliminary, hidden-damage, in-process, and/or final Inspections. The Chief Inspector oversees and authorizes the return to service functions on all civil aviation articles in accordance with the current technical data provided in the OEM for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: • Quantum Configuration & Support Manage daytoday administration of Quantum modules (Shop Control, POs, Repair Orders, Inventory Control, Event Manager), including configuration, workflows, and user permissions, • Vendor Management: Coordinate with Component Control and thirdparty consultants on system upgrades, patches, troubleshooting, and SLAs, • Reporting & Analytics: Design, develop, and optimize reports and dashboards using SQL, Crystal Reports, Power BI, or Tableau to track KPIs and system performance, • Integrations: Implement and maintain integrations between Quantum and ERP (e.g., SAP), procurement, inventory, and financial systems via APIs, EDI, or middleware, • Data Management: Perform data imports/exports, integrity checks, cleanses, and masterdata maintenance to ensure accuracy and compliance, • Training & Documentation: Create and deliver training materials, user guides, and run support sessions for global endusers, • Process Improvement: Analyze system metrics, identify gaps, and recommend enhancements to workflows and controls, • Audit & Compliance: Support SOX ITGC audits by providing system documentation, audit trails, and control evidence, • CrossFunctional Collaboration: Partner with Maintenance, Supply Chain, Finance, and IT teams to align system capabilities with business requirements Qualifications: • Bachelor’s degree in Information Technology, Computer Science, Business, or related field, • 5+ years’ experience supporting MRO or other enterprise ERP systems (ideally Quantum), • Proficiency with SQL and reporting tools (Crystal Reports, Power BI, Tableau), • Strong vendor management and project coordination skills, • Excellent written and verbal communication; strong documentation skills Preferred Qualifications: • Component Control Quantum Professional (CCQP) certification, • 10+ years’ experience supporting MRO or other enterprise ERP systems (ideally Quantum), • Microsoft Certified: Azure Data Engineer Associate, • Handson experience integrating Quantum with SAP or Oracle ERP, • Scripting ability in Python, PowerShell, or .NET for integrations Preferred Skills & Tools: • Quantum Modules: Shop Control, Purchase Orders, Repair Orders, Inventory Control, Event Manager, • Database & Reporting: Microsoft SQL Server, Crystal Reports, Power BI, Tableau, • Integration & Middleware: APIs, EDI, Mulesoft, • Service Management: ServiceNow or equivalent Service Management, • Version Control: Git or equivalent, • Data Processes: ETL, data cleansing, masterdata management Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Job Description Are you a hospitality professional with experience in Culinary and have a love for hospitality and genuinely exceeding expectations? Would you like to further your hospitality career in an upscale resort environment with breathtaking views? If so, please read on! Fisher Island Club is looking to hire a full-time Beach supervisor. This position has a competitive wage, depending on experience. All eligible full-time regular employees are also offered great benefits, including medical, dental, vision, a 401 (k) retirement savings plan, holiday pay, vacation time, paid time off (PTO), short-term disability, life insurance, AD&D, free parking, and free meals. If this sounds like the right opportunity for you to dive deeper into the hospitality industry, consider applying to join our exceptional team today! ABOUT FISHER ISLAND CLUB HOTEL & RESORT Accessible only by ferryboat or private yacht, our boutique property is comprised of a collection of just 15 graciously appointed historic and reimagined cottages, villas, and guesthouse suites that surround the now-iconic limestone and marble Vanderbilt Mansion mere steps from the beach, pool, spa, restaurants, and marina. Our private membership-only club boasts a beach club with one of the country's only genuinely secluded beaches, a 15-room all-suite luxury hotel, an award-winning championship golf course, 17 tennis courts, 4 pickleball courts, two deep-water marinas, a variety of casual and formal dining venues, a spa, a salon, a fitness center, the Vanderbilt Theater, an aviary with over a dozen exotic birds, and an observatory for stargazing. No other Miami resort or hotel offers the type of world-class luxury and 5-star level of service that we do. It is the superior service and attention to detail that our staff provides to our residents, members, and hotel guests that distinguishes us from other private clubs. That's why we consider the health and well-being of our staff members to be one of our highest priorities. In addition to competitive wages, we are pleased to offer a variety of excellent benefits and career growth opportunities. The Beach Club Supervisor’s primary responsibility is the supervision of the Beach Club Restaurant/Bar /Pool and Beach Floor at Fisher Island Club, to ensure that the club’s high standards are achieved and maintained within budgetary limitations. The ideal candidate will be an inspirational role model by his/her team members and is a top professional in the field with a passion for the service. This includes all practices, procedures, training and guest satisfaction levels. A procedural approach to managing the entire beach club must be employed, utilizing modern supervision principles as well as incorporating technological innovations where practical in order to deliver top quality guest service. In accordance with Fisher Island Club’s philosophy, all team members work together sharing in a common goal of a successful and innovative club. Team members are to demonstrate integrity, fairness and honesty. These are our core values that we will live by in our daily interaction with all our external and internal members, guests and customers. Nature and Scope: • The incumbent reports directly to the Director of Beach Club Operations. The major trust of the position is to create and maintain a professional restaurant operation and control expenses relative to the operation. Duties and Responsibilities: • Lead by example utilizing a “hands-on” approach to management., • Establish and develop a highly motivated, front of house team with the highest ethical standards that delivers a memorable service and product., • Facilitate an environment in which team members are comfortable utilizing the open-door policy, • Trains, supervises, schedules and evaluates the work of the front of house staff at the Beach Club, • Plans menus with Sous Chef and Director for the Beach Club and for special occasions and events, • Ensures that high standards of sanitation, personal appearance and hygiene, cleanliness and safety are maintained throughout all club areas at all times, • Safeguards all food-preparation employees by implementing training to increase their knowledge about safety, sanitation and accident-prevention, and overall restaurant operation principles, • Uphold and maintain standard service techniques, food and beverage presentation that help to assure consistently high quality and to minimize cost; exercises portion control for all items served and assists in establishing menu selling prices, • Prepares necessary data for applicable parts of the budget; projects annual food, labor and other costs and monitors actual financial results; takes corrective action as necessary to help assure that financial goals are met, • Hosts Beach Club Daily Stand-Up meetings and attends Food and Beverage staff and management meetings, • Maintains an inventory of dining room items including silverware, coffee pots, water pitchers, glassware, flatware and china, salt and pepper holders, sugar bowls and linen and ensures that they are properly stored and accounted for, • Maintains the dining room reservation system, • Implements an ongoing marketing program to increase dining room business, • Consults with the Director of Beach Club Operations about all aspects of the club operation, • Directly supervise employees serving members and guest to the LQA standards, • Evaluates service to ensure that quality provided meets the LAQ standards are consistently attained, • Interacts with applicable staff members to assure that service consistently exceeds the expectations of members and guests, • Develop and maintain good communication and work relationships in all areas of the club, • Assist in development of policies and procedures to enhance and measure quality; continually updates written policies and procedures to reflect state-of-the-art techniques, equipment and terminology, • Assist with recruiting; evaluates job performance of service staff; coaches, rewards and disciplines staff in a fair and within legal compliance, • Establishes and maintains a regular cleaning and maintenance schedule for all front of house areas and bar, • Motivates, builds morale, and provides professional development opportunities for all service staff including cross-training, • Maintain a 90% presence on the dining and bar areas during service, touching tables, follow-up on special request, welcome members and inquire about experience, • Executes safety training programs; manages OSHA-related aspects of kitchen safety and maintains; report unsafe working conditions immediately., • Bachelor’s degree in Hospitality Management degree and two years luxury service and management experience; or, • Minimum of two to three years’ experience as a Manager/Assistant in a medium size (250+ rooms) high volume, 3 meal restaurants in luxury hotel or resort. Licenses and Special Permits: • Alcoholic beverage certification, • Food safety certification. Knowledge, skills and abilities: • Strong interpersonal, managerial and leadership skills required, • Strong organizational and time management skills required, • Ability to manage change effectively, • Ability to conceptualize the mission, • Clear, concise written and verbal communication skills, • Experience making presentations in front of groups, • Track record promoting an atmosphere of teamwork, • Experience communicating, training, and managing multi-lingual staffs, • Instill a guest service “can-do” attitude in all employees, • Experience training and developing employees with limited experience, • Coach employees how to resolve and de-escalate conflicts in a calm and organized manner, • Strong customer service and reasoning skills, • Strong and creative problem-solving skills with exceptional detail in follow-up, • Strong budgetary, projections, and cost control skills, • Follow/enforce company policies and procedures, • Ability to quickly evaluate alternatives and decide on a plan of action, • Teach suggestive selling techniques, • Juggle and balance needs of the organization Attributes • Proactive, Team Player, Problem Solver, • Passionate about hospitality and customer service driven, • Must have a professional appearance and good hygiene, • Respect for all co-workers and guests, • Pride in your work by creating positive energy, excitement and fun, • Demonstrate positive behaviors; smiling, being polite and courteous, • Able to develop a camaraderie with team members Working Conditions: • Ability to work odd hours, nights, weekends and holidays, • Ability to work under pressure and handle stress Physical demands and abilities: • Work is not performed in an office environment and requires extended periods of walking and or standing., • Regularly required to use hands to finger, handle or feel, reach with hands and arms and talk or hear, • Regularly lift and/or move objects 10-50lbs occasionally lift and/or move objects that weigh more than 50 lbs., • Frequently required to stand, walk, stoop, kneel, crouch or crawl, • Occasionally required to sit and climb or balance, • Specific vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust and focus This description is not necessarily an exhaustive list of all responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed when circumstances (changes in personnel, workload, rush jobs, emergencies, or technological developments) change.

Job Description Thompson Staffing is looking for a Structural Engineer With a Threshold inspector certification to work for a company in the North Miami, FL area. Candidate will be responsible for conducting property condition assessments on commercial properties and identifying physical structural deficiencies of building systems and building system components. MUST HAVE A THRESHOLD INSPECTOR CERTIFICATION. MUST BE A FLORIDA LICENSED PROFESSIONAL ENGINEER. This is a direct hire opportunity with full benefits. Salary - $100,000-$125,000. Please email your resume to /305.381.9111. Company DescriptionThompson Staffing has been serving the South Florida community as recruiters for over 20 years. They currently assist companies in South Florida to find excellent talent for various positions.Thompson Staffing has been serving the South Florida community as recruiters for over 20 years. They currently assist companies in South Florida to find excellent talent for various positions.

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW Receiving inspectors inspect incoming and outgoing items for quality and accuracy. Receiving inspectors monitor and inspect all incoming deliveries to ensure the quality of items and order accuracy. This includes opening boxes and personally counting and viewing all items. Shift schedule: 2:30pm-11:00pm Responsibilities: • Inspects purchased parts, assemblies, accessories, and materials for conformance to specifications, using precision measuring instruments and devices: Examines items for defects in materials, work, and damage occurring in transit., • Receiving inspectors note inaccurate or unacceptable orders received in the inventory system and refuse to accept these items., • Enter items received into the inventory system., • Write regular inventory reports to note all incoming and outgoing shipments., • Inspect all outgoing shipments to ensure proper packaging, address information, and item accuracy before shipments are made., • Data entry of incoming units into Quantum., • Report, update, transact, and provide information that facilitates the general repair process., • Handle any additional tasks as requested., • Knowledge of Quantum, • Basic math skills, • Good eye for detail to spot inaccuracies and poor quality in all incoming and outgoing shipment items., • Self-directed, motivated with limited supervision, solid decision making, and analytical skills., • Adaptable, flexible, and detail-oriented., • Ability to multi-task in a fast-paced environment. Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. Shift schedule: 2:30pm-11:00pm

Job Description Salary Range: $61K - 73K Location: Miami, Ft. Lauderdale, WPB Position: Construction Engineering and Inspection (CEI) - Engineering Intern ESSENTIAL FUNCTIONS: • Performs inspection assignments in assisting Senior Inspectors in the performance of their duties. Must also currently have or be willing to obtain the following certifications, as a minimum, within twelve (12) months of hire: Florida Department of Transportation’s (FDOT’s) Construction Training Qualification Program (CTQP) • CTQP Concrete Field Inspector Level I, • CTQP Final Estimates Level I, • CTQP Asphalt Roadway Level I, • CTQP Earthwork Construction Inspection Level I, • CTQP Pile Driving Inspection, • International Municipal Signal Association (IMSA) Traffic Signal Inspector Level I, • FDOT Intermediate Maintenance of Traffic (MOT), • Nuclear Radiation Safety, • Valid Driver’s license required., • Able to read engineering drawings and system maps., • Able to understand and follow contractor schedules., • Able to carry 40 pounds (testing equipment)., • Able to stand and sit as needed on project work sites, climb ladders, work at heights, and work outdoors in a wide range of weather conditions, periodic weekend and night work may be required., • Able to safely navigate construction work sites with uneven terrain. EAC Consulting, Inc. (EAC) is looking for a CEI Inspector - Engineering Intern to join our team for an upcoming project, in our Miami office. EAC is a trusted firm for infrastructure solutions that advance communities through innovation and resilience. Our full-service capabilities include planning, design, construction management and program management within transportation, site development, utilities, water/wastewater, airports and seaports. At EAC, we thrive by collaborating as one unified team and offer an inspiring work environment. We live our core values, delivering exceptional client service and cutting-edge engineering. Move your career forward working with EAC’s highly talented industry professionals who enhance quality of life through engineering excellence! EAC offers: • Competitive compensation, • Participation in EAC's bonus program, • Medical, Dental, and Vision insurance, • Health Maintenance Subsidy, • Life, AD&D Short Term and Long-Term Disability insurance, • 401k – competitive company contribution

Job DescriptionBenefits: • 401(k) matching, • Health insurance Tew & Taylor has been a trusted leader in building-code inspections and plan-review services since 2008. We deliver expert, reliable, and timely service with the highest standards of accuracy and customer care. Position Overview We are seeking a highly skilled Building Code Inspector with experience in Structural, Mechanical, Electrical, and Plumbing inspections for both commercial and residential projects. This role is mission-critical: you will ensure compliance with the Florida Building Code and local regulations by reviewing construction plans and performing on-site inspections. Youll collaborate directly with contractors, developers, and permitting authorities to keep projects moving and avoid costly delays. Key Responsibilities Inspections & Compliance • Conduct inspections of structural, mechanical, electrical, and plumbing systems at all construction stages., • Verify full compliance with Florida Building Code, local ordinances, and floodplain requirements., • Document results, flag deficiencies, and communicate required corrections clearly to clients., • Complete inspections and reports on time to support our same-day/next-day turnaround commitment.Plan Review & Coordination, • Review construction documents, blueprints, and specifications for code compliance., • Work closely with the permitting team and local building officials to resolve issues efficiently., • Maintain detailed records of inspections, correspondence, and approvals.Professional Development, • Stay current on Florida Building Code updates and industry best practices., • Collaborate with the team to refine processes and deliver a seamless client experience.Qualifications & Requirements Experience • Minimum 5+ years in building code plan review and/or inspections (commercial + residential).Certifications, • Florida or ICC Certified Building Code Inspector in Structural, Mechanical, Electrical, and Plumbing disciplines for Commercial and Residential dwellings requiredTechnical Skills, • Strong understanding of Florida Building Code and local Miami-Dade requirements., • Skilled in reading and interpreting plans, specs, and construction documents., • Familiarity with permitting and inspection software; Microsoft Office proficiency preferred.Soft Skills, • Clear, professional communicator with excellent client-facing skills., • Detail-oriented and organized, capable of managing multiple projects simultaneously., • Comfortable working in a fast-paced environment with tight deadlines.Preferred, • Spanish language proficiencyWhy Join Tew & Taylor?, • Competitive compensation & benefits package, including 3 weeks PTO, IRA matching program, and a supportive team culture., • Opportunity to help launch and grow our Miami office, making a direct impact on the market., • Work with a company known for its 15+ years of expertise and commitment to excellence., • Be part of a collaborative, growth-oriented team where your voice matters.

Job Description JOB SUMMARY: The responsibility of the Quality Assurance Inspector is to receive, inspect, approve, release all manufactured products at Custom Veterinary Services. BENEFITS: Full benefits offering to include medical, dental, vision and life with competitive paid time off. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Follows Quality Control Manager’s direct instructions., • Follows all cGMP’s and SOP’s., • Works closely with Planning and Production., • Inspects Incoming (as required) and Outgoing trucks., • Issues Label Deviations based on information received from Production Planning when required., • Helps in EMP (Environmental Monitoring Program) sampling. Prepares samples and documentation (Chain of Custody) for machinery, equipment, rooms, personnel, and other facility items., • Participates in other Quality activities as needed., • Heavy lifting at times, exceeding 40 pounds., • Proactively manage safety by ensuring compliance with all Federal and State regulations and internal Company policies., • Ensure unsafe conditions are corrected in a timely manner., • Incumbent may be asked to provide other duties as assigned. KNOWLEDGE & SKILLS: • GMP’s (Good Manufacturing Practices) in Pharma, Food or Cosmetic industry a plus., • Computer literate., • Bi-Lingual in English and Spanish preferred., • Commitment to lifelong learning., • Strong detail and organization orientation., • Ability to act with a sense of urgency without compromising quality., • Must be able to lift packages under 40 pounds occasionally. EDUCATION AND EXPERIENCE: • High School Diploma or equivalent a minimum., • Control & Issuance in Pharma, Food or Cosmetic industry a plus. WORK ENVIRONMENT/PHYSICAL DEMANDS • A mix of Office and Facility (Plant) Environment at single manufacturing facility., • Required to sit and type on a keyboard occasionally., • Walking required during the day., • Heavy lifting at times, not exceeding 40 pounds.

Required Skills & Experience • 2+ years of inspection experience using tools like calipers, ring/pin gauges, comparators, and Smart Scope., • Experience with QA inspection methods, including First Article Inspection., • Proficiency in Microsoft Office, especially Outlook and Excel., • Familiarity with dimensional and visual inspections per design records and AQL levels., • Ability to review and disposition certification documentation to meet - AS9100 and company quality standards. Nice to Have Skills & Experience • Previous aerospace inspection experience., • Knowledge of AS9100 requirements., • Ability to manage multiple and competing priorities., • Experience mentoring inspection teams. Customer Designated Supplier Quality Representative Stamp for at least three customers (or as applicable by site size). Job Description Our client in the aerospace industry is looking for Quality Inspectors to join their team. The responsibilities include verifying routine product conformance to design requirements and provide objective evidence of results, performing auditing, surveillance, and monitoring activities, identifying and documenting discrepancies, segregate and control non-conforming items. They will also be responsible for conducting preliminary review and disposition of non-conformance, inspecting incoming parts/materials and outgoing orders; verifying certifications. The candidates will be using inspection tools daily (micrometers, calipers, indicators, etc.), conducting product reviews with customers during verification processes, reviewing and disposition certification documentation for traceability, and actively use and maintain Customer Designated Supplier Quality Representative Stamps.

Inspecting new and existing plumbing facilities including plumbing, water supply, gas supply, and drainage systems, fixtures, and appliances; pipe work in connection with oil burning equipment, air conditioning and boiler installation, fire lines and sprinkler systems. Conducting technical field ins

Knowledge of welding techniques and welding inspection processes. Conducting thorough welding inspections to ensure quality and compliance with client specifications. Certified Welding Inspector (CWI) preferred, but not necessarily required.

Fire Sprinkler Systems Inspector. Inspect and test fire sprinkler systems to ensure that they function effectively and meet NFPA standards. Adjust or repair malfunctioning systems.

TYLin is a globally recognized, full-service infrastructure consulting firm committed to providing innovative, cost-effective, constructible designs for the global infrastructure market.With over 3,000 employees throughout the Americas, Asia, and Europe, the firm provides support on projects of vary

Dealer Specialties is looking for a Vehicle Inspector and Photographer (bilingual Spanish) to join our dynamic team.

Job Description Who We Are? For over two decades, The Falcon Group’s mission has been to understand our client’s variety of needs, while keeping to their anticipated budget and exceeding their desired results. The Falcon Group’s services include Architectural Services and Civil, Structural, Construction & MEP Engineering Services, and much more. The Team At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Our Restoration Division focuses on the design of repairs, renovations, alterations of existing structures and oversee & documenting their execution in the field. We perform condition assessments, investigations, quality control inspections, feasibility studies, and peer reviews. SUMMARY: We have an immediate opportunity for a Construction Project Manager for our Owner Representative/Project Management Division in our Miami, FL location. We are looking for a candidate with experience in identifying critical issues relevant to a project’s success from pre-construction planning and procurement through project execution and close-out. The ideal candidate will provide insight into processes that improve project performance, analyzing estimates, budgets, schedules, contracts, control systems, and then integrating those pieces into an efficient whole to support successful project completion. DUTIES & RESPONSIBILITES: • Ensuring the successful completion of project objectives on-time and within budget., • Attend Condominium Board and Association membership meetings to discuss details of projects as well as coordinating meetings with contractors and design professionals., • Prepare and present comprehensive presentations to convey all project related information to the Condominium Board and Community., • Prepare and track agendas, minutes, and action items for all project-related meetings., • Produce regularly scheduled communications in the form of weekly updates and monthly progress reports to convey all project related information to Board and Community., • Prepare and deliver Requests for Proposals for the solicitation of all project participants as well as analyze Proposals solicited from all project participants., • Review all project construction contracts and provide feedback and recommendations., • Review/analyze all deliverables including project plans and specifications, shop drawings, material spec books, contractor submittals, etc., and provide feedback and recommendations to maximize design and cost efficiencies and avoid delays and deviations from the client’s anticipated project outcome., • Prepare detailed overall project schedules, budgets, cashflow budgets, and pay app/invoice tracking sheets to properly track and project all project-related financials., • Perform monthly budget and schedule reconciliation exercises to maintain up-to-date financials and timelines associated with the project., • Perform site inspections to ensure quality workmanship and compliance with contractual obligations., • Lead weekly Owner/Architect-Engineer/Contractor meetings and provide solutions to potential issues related to the project. SUPERVISORY RESPONSIBILITIES: This position entails no supervisory responsibilities. QUALIFICATIONS: Education • In lieu of education a minimum of three years of experience in an architectural and engineering consulting firm, construction administration or similar field., • Experience in building/maintaining construction schedules, budgets, etc., • Valid United States Driver’s License required, as this position requires travel to and from client sites., • General Contractor License preferred, • Knowledge of construction delivery methods, processes, and agreements, • Familiarity with construction best practices and general building codes and permitting processes., • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, and standards., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets. Lifting • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%). Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR JExddM1SR7

Our client in the aerospace industry is looking for Quality Inspectors to join their team.

Quality Inspector for an assignment in Miami, Florida.

Our Risk Control Inspectors evaluate businesses behind the scenes to identify hazards and.