Offres inspector à Joliet, IllinoisCréer des alertes d'emploi

Production Inspector In this job you will inspect component parts and completed product for conformance to production controls and ISO standards. As a Production Inspector you will: • Perform final inspection tasks on all switches and part orders being shipped, • Train production personnel in effective methods to control processes, • Prepare reports for all findings, • Position has the authority to "shut down" non-conforming processes after notifying Supervisor, • Prepare and enter NCRs (Non-Conformance Reports), • Write Customer Improvement Initiative (CII) for repetitive problems, • Report violations of ISO standard to the Cell Leader / Manager, • Responsible (along with team members from product engineering, manufacturing engineering and production) for the creation/implementation of process control charts for all critical processes Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of inspection tasks as needed, • Inspect all work prior to passing it on to the next operation, • Has a High School diploma, GED or combination of work experience and skill development, • Ideally has 1 - 3 years of experience working in a manufacturing environment, • Has an ability to read and interpret drawings, schematics, bills of materials, wiring and ladder diagrams desirable, • Must have basic computer skills in MS Word and Excel Experience using an ERP system desirable, • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing - continuous, • Walking - continuous, • Bending/stooping - frequent, • Squatting/kneeling - frequent, • Lifting - frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering -continuous, • Variable hand/power tool use - frequent Pay Range is typically between $20 - $23 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Electronic Technician I In this job you will be assemble, troubleshoot, connect and test electronic assemblies of basic to moderate complexity As an Electronic Technician I you will: • Assemble junction boxes, electronic controls, and other assemblies per mechanical and electrical drawings, • Install and test completed electronic assemblies, • Act as an inspector for final electronics checkout, • Interact with manufacturing to ensure proper installation and test of completed electronic assemblies, • Participate in wiring diagram / interconnect drawing reviews, • Troubleshoot electronic assemblies for production and aftermarket support, • Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of moderately complex electronic assembly tasks as needed, • Inspect all work prior to passing it on to the next operation, • Is able to safety use small hand and power tools, • Can read and interpret Drawings and Bills of Material, • Must have basic computer skills, • Must have working knowledge of wiring diagrams, interconnect drawings / ladder logic, schematics and Gerber files, • Is able to bench troubleshoot wiring utilizing available diagrams and drawings and discrete circuits containing relays, diodes, transistors, capacitors, resistors and DC battery chargers utilizing schematics and Gerber files, • Is knowledgeable in the usage of millimeters and power supplies, • Must have attention to detail and be able to work independently and follow written procedures, • Must be able to assist with training of new employees on basic to moderate testing tasks., • Has a High School diploma, GED or combination of work experience and skill development, • Must be able to understand and follow verbal and written instructions in English., • Ideally holds an Associate's degree in Electronics Engineering Technology, Electronics or other electronics related discipline, or the equivalent combination of work/military experience and skill development, • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing - continuous, • Walking - continuous, • Bending/stooping - frequent, • Squatting/kneeling - frequent, • Lifting - frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering -continuous, • Variable hand/power tool use - frequent Pay Range is typically between $20 - $25 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Overview: If You’re Great at Sales, We’ve Got the Career for You Are you a natural at connecting with people and closing deals? At Orkin, we’ll turn your drive and people skills into a successful, long-term sales career – with uncapped earning potential and the backing of the most recognized name in pest control. As an Orkin Sales Inspector, you’ll offer homeowners genuine peace of mind by providing trusted protection backed by over 120 years of expertise, the Orkin Guarantee, and a brand customers already trust. You’ll also enjoy award-winning training, career development, and the satisfaction of helping families protect their most valuable investment, their home. Why Orkin? At Orkin, we do more than eliminate pests – we protect health, homes, and peace of mind by providing many different services, including: • Attic cleanouts for wildlife issues, • Crawl space remediation, • Termite treatments and complete pest control solutions, • Full home exclusions using metal and professional-grade sealants We are driven by a shared mission and grounded in values that define everything we do: • Safety, • Professionalism, • Empathy, • Integrity, • Innovation With a reputation built over more than a century and a team-first culture, you’ll feel supported from day one – with the freedom and tools to succeed. Responsibilities: What You’ll Be Doing • Conducting full-home inspections (from attic to crawl space), • Build trust by explaining your findings clearly and recommending the best treatment options., • Close sales by showcasing the value, protection, and long-term benefits of Orkin’s services, • Manage appointments, follow-ups, and documentation using a company-provided iPad., • Work independently, prioritize your schedule, and maximize leads and self-generated opportunities., • Represent Orkin with professionalism, empathy, and integrity every step of the way. What’s In It for You? • Top Earning Potential: Average First Year Earnings between $70,000 and $100,000 (base + commission), • Uncapped Commission: The more you sell, the more you earn, • Company Vehicle: Gas card included, • Paid Training: No pest control experience required – we’ll teach you everything., • Benefits that Go Beyond:, • Medical, Dental, Vision, & Life Insurance, • 401(k) with company match, • Paid vacation, sick leave, and holidays, • Employee Stock Purchase Plan, tuition reimbursement, and scholarship opportunities, • Love meeting new people and helping solve real problems, • Are confident, competitive, and goal-driven, • Can work independently and stay organized, • Don’t mind climbing, crawling, or working in various weather conditions. Minimum Requirements • High School Diploma or equivalent required, • Use a ladder safely within the manufacturer’s weight capacity., • Lift and carry up to 50 lbs., • Safely access crawl spaces, attics, confined spaces, rooftops, etc., • Wear personal protective equipment (PPE), which sometimes requires an OSHA-compliant respirator. Orkin is an Equal Opportunity/Protected Veterans/Individuals with Disabilities Employer #ORKAPP 2/3/2026

Overview: If You’re Great at Sales, We’ve Got the Career for You Are you a natural at connecting with people and closing deals? At Orkin, we’ll turn your drive and people skills into a successful, long-term sales career – with uncapped earning potential and the backing of the most recognized name in pest control. As an Orkin Sales Inspector, you’ll offer homeowners genuine peace of mind by providing trusted protection backed by over 120 years of expertise, the Orkin Guarantee, and a brand customers already trust. You’ll also enjoy award-winning training, career development, and the satisfaction of helping families protect their most valuable investment, their home. Why Orkin? At Orkin, we do more than eliminate pests – we protect health, homes, and peace of mind by providing many different services, including: • Attic cleanouts for wildlife issues, • Crawl space remediation, • Termite treatments and complete pest control solutions, • Full home exclusions using metal and professional-grade sealants We are driven by a shared mission and grounded in values that define everything we do: • Safety, • Professionalism, • Empathy, • Integrity, • Innovation With a reputation built over more than a century and a team-first culture, you’ll feel supported from day one – with the freedom and tools to succeed. Responsibilities: What You’ll Be Doing • Conducting full-home inspections (from attic to crawl space), • Build trust by explaining your findings clearly and recommending the best treatment options., • Close sales by showcasing the value, protection, and long-term benefits of Orkin’s services, • Manage appointments, follow-ups, and documentation using a company-provided iPad., • Work independently, prioritize your schedule, and maximize leads and self-generated opportunities., • Represent Orkin with professionalism, empathy, and integrity every step of the way. What’s In It for You? • Top Earning Potential: Average First Year Earnings between $70,000 and $100,000 (base + commission), • Uncapped Commission: The more you sell, the more you earn, • Company Vehicle: Gas card included, • Paid Training: No pest control experience required – we’ll teach you everything., • Benefits that Go Beyond:, • Medical, Dental, Vision, & Life Insurance, • 401(k) with company match, • Paid vacation, sick leave, and holidays, • Employee Stock Purchase Plan, tuition reimbursement, and scholarship opportunities, • Love meeting new people and helping solve real problems, • Are confident, competitive, and goal-driven, • Can work independently and stay organized, • Don’t mind climbing, crawling, or working in various weather conditions. Minimum Requirements • High School Diploma or equivalent required, • Use a ladder safely within the manufacturer’s weight capacity., • Lift and carry up to 50 lbs., • Safely access crawl spaces, attics, confined spaces, rooftops, etc., • Wear personal protective equipment (PPE), which sometimes requires an OSHA-compliant respirator. Orkin is an Equal Opportunity/Protected Veterans/Individuals with Disabilities Employer #ORKAPP 2/4/2026

Job DescriptionCompany Description Titeflex/US Hose is a global leader in creating and adapting fluid and gas management products and quality programs, Titeflex expertise can be traced to its aerospace roots at the dawning of the space age. We provided solutions and service for demanding fluid and gas transfer requirements, whether the media be corrosive, caustic or combustible, under extreme pressure, temperature and flexing conditions. Primary markets include aerospace, chemical, petro-chemical, pulp and paper, petroleum equipment, heavy equipment, compressed gas, automotive, refrigeration, transportation, and dozens of other niche markets. The company has a long history of expertise in PTFE extrusion and wire braid reinforcement, and composite hose as the new integration of flexible metal hose with the merger of US Hose. Titeflex’s background and experience in stringent and demanding hose requirements plays into the strengths of our applications engineers. We are able to assimilate some of the most difficult and demanding applications known today into customer satisfaction, borrowing from our experience and core technology. Committed to quality, Titeflex Quality Systems are 3rd party certified and has received numerous other certifications and accreditations. Job Description Job Summary: We are seeking a highly skilled Welding Engineer with expertise in robotic welding systems and proven supervisory experience to join our engineering team. This role is critical to developing and optimizing manual and automated welding processes to ensure product quality, efficiency, and compliance with industry standards. The ideal candidate will lead welding projects, oversee production teams, and drive continuous improvement across all welding operations. Key Responsibilities: • Develop, implement, and optimize manual and robotic welding procedures, including WPS and PQR documentation in accordance with industry standards (AWS, ASME, ISO, API, etc.)., • Lead the setup, programming, and troubleshooting of robotic welding systems (e.g., ABB, Fanuc, KUKA, Motoman)., • Supervise and coordinate the activities of welders and welding technicians to ensure adherence to quality and production standards., • Provide technical support and training to welding staff, including mentoring and performance evaluations., • Analyze welding defects and failures; perform root cause analysis and implement corrective actions., • Collaborate with design, quality, and production teams to ensure weldability and manufacturability of components., • Oversee welding process audits and maintain full documentation of procedures and inspection records., • Monitor productivity, welding performance, and implement continuous improvement initiatives., • Ensure all welding activities comply with safety regulations and company policies., • Participate in the selection, installation, and maintenance of welding equipment, including robotic cells. Required: • Bachelor's degree in Welding Engineering, Mechanical Engineering, Manufacturing Engineering, or a related field., • 5+ years of experience in welding engineering, including at least 2 years working with robotic welding systems., • Proven supervisory or team leadership experience in a manufacturing or fabrication environment., • Strong knowledge of welding codes and standards (AWS D1.1, ASME IX, ISO 3834, etc.)., • Hands-on experience with multiple welding processes: SMAW, GMAW, GTAW, FCAW., • Certifications such as Certified Welding Engineer (CWEng) or Certified Welding Inspector (CWI)., • Experience in [industry – e.g., automotive, aerospace, oil & gas, heavy fabrication]., • Proficiency in CAD software and welding simulation tools (e.g., WeldSim, RoboDK)., • Strong leadership and team-building capabilities., • Excellent problem-solving and troubleshooting skills., • Effective communication skills (verbal and written)., • Combination of office and shop floor environment., • Occasional travel to project sites, customer locations, or supplier facilities., • Use of PPE is required when working in fabrication or production areas.Qualifications Required: • Bachelor's degree in Welding Engineering, Mechanical Engineering, Manufacturing Engineering, or a related field., • 5+ years of experience in welding engineering, including at least 2 years working with robotic welding systems., • Proven supervisory or team leadership experience in a manufacturing or fabrication environment., • Strong knowledge of welding codes and standards (AWS D1.1, ASME IX, ISO 3834, etc.)., • Hands-on experience with multiple welding processes: SMAW, GMAW, GTAW, FCAW., • Certifications such as Certified Welding Engineer (CWEng) or Certified Welding Inspector (CWI)., • Experience in [industry – e.g., automotive, aerospace, oil & gas, heavy fabrication]., • Proficiency in CAD software and welding simulation tools (e.g., WeldSim, RoboDK)., • Knowledge of lean manufacturing and Six Sigma principles. Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

The Final Inspector is responsible for performing routine checks, tests, gauging and instrument inspections of finished goods. Separation of acceptable and unacceptable product. Responsibilities • Perform final inspection to verify process and product quality., • Inspect drums internally and externally with provided light source, • Records test information accurately, on the computer and in neatly written shift reports, • Works closely with front line, operators, and production supervisors to advise when adjustments are needed., • Notifies supervisor when inspection data exceeds acceptable limits or when major incidents of poor quality are noted., • Follows procedures for containments and placing defective or contaminated drums on HOLD, • May be required to assist with testing on samples and special situations, • Must perform all duties in the department in a safe manner and consistent with all company safety rules, • Develops and demonstrates a knowledge and understanding of established quality policy, procedures, and instructions., • High school graduate or equivalent, • Use and understanding of precision measuring instruments and gauges, specifications, charts, and diagrams, • Good hand/eye coordination and motor skills, • Must be able to read, write and speak English, • Ability to operate a Forklift in a safe manner, or ability and willingness to learn, • Computer skills are required (familiarity with windows and Microsoft office suite), • Strong attention to detail and recordkeeping, • Ability to lift 55 lbs., • Vision: 20/20 corrected and normal hearing range., • Requires good hand/eye/foot coordination and motor skills., • Must be able to stand, balance, stoop, kneel and/or crouch for extended periods of time. Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. The pay range is $21.75-$24 an hour. Exact salary offered will depend on candidate's experience, skills, etc. Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits. Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers better—and help them be better stewards of the environment. Whether you’re a seasoned professional—or just beginning your career—there’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Benefits: Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Close sales by showcasing the value, protection, and long-term benefi Sales, Inspector.

The Packer will be responsible for pulling plastic items (preforms) from a box and placing on the conveyor and/or pulling product i.QC specifications and packaging them per packaging specifications.Follows GMP policies & guidelines.Remove plastic (preforms) from a box, inspecting them per quality sp

Performs vessel inspections under the direct supervision of a Senior Inspector. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Assists in the training of Probationary and Junior Inspectors.

Job Description Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company’s core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. • Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty, • Integrity: Create an empowered, engaging, and accountable culture focused on client service, • Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company’s respected and trusted reputation. Minimum Requirements • Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience., • Must complete Inspector level training and pass corresponding theoretical tests and field evaluations., • Must have or obtain IFIA certification after gaining at least six months of industry experience., • Must maintain a valid Transportation Worker’s Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver’s license, vehicle insurance and registration., • Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel)., • Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: • Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules., • Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts., • Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment., • Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored., • Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner., • Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved. 6 days on and 2 days off

Job Description Production Inspector In this job you will inspect component parts and completed product for conformance to production controls and ISO standards. As a Production Inspector you will: • Perform final inspection tasks on all switches and part orders being shipped, • Train production personnel in effective methods to control processes, • Prepare reports for all findings, • Position has the authority to “shut down” non-conforming processes after notifying Supervisor, • Prepare and enter NCRs (Non-Conformance Reports), • Write Customer Improvement Initiative (CII) for repetitive problems, • Report violations of ISO standard to the Cell Leader / Manager, • Responsible (along with team members from product engineering, manufacturing engineering and production) for the creation/implementation of process control charts for all critical processes Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of inspection tasks as needed, • Inspect all work prior to passing it on to the next operation, • Has a High School diploma, GED or combination of work experience and skill development, • Ideally has 1 - 3 years of experience working in a manufacturing environment, • Has an ability to read and interpret drawings, schematics, bills of materials, wiring and ladder diagrams desirable, • Must have basic computer skills in MS Word and Excel Experience using an ERP system desirable, • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing – continuous, • Walking – continuous, • Bending/stooping – frequent, • Squatting/kneeling – frequent, • Lifting – frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering –continuous, • Variable hand/power tool use – frequent Pay Range is typically between $20 - $23 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Job Description Production Inspector In this job you will inspect component parts and completed product for conformance to production controls and ISO standards. As a Production Inspector you will: • Perform final inspection tasks on all switches and part orders being shipped, • Train production personnel in effective methods to control processes, • Prepare reports for all findings, • Position has the authority to “shut down” non-conforming processes after notifying Supervisor, • Prepare and enter NCRs (Non-Conformance Reports), • Write Customer Improvement Initiative (CII) for repetitive problems, • Report violations of ISO standard to the Cell Leader / Manager, • Responsible (along with team members from product engineering, manufacturing engineering and production) for the creation/implementation of process control charts for all critical processes Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of inspection tasks as needed, • Inspect all work prior to passing it on to the next operation, • Has a High School diploma, GED or combination of work experience and skill development, • Ideally has 1 - 3 years of experience working in a manufacturing environment, • Has an ability to read and interpret drawings, schematics, bills of materials, wiring and ladder diagrams desirable, • Must have basic computer skills in MS Word and Excel Experience using an ERP system desirable, • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing – continuous, • Walking – continuous, • Bending/stooping – frequent, • Squatting/kneeling – frequent, • Lifting – frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering –continuous, • Variable hand/power tool use – frequent Pay Range is typically between $20 - $23 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Job Description Production Inspector In this job you will inspect component parts and completed product for conformance to production controls and ISO standards. As a Production Inspector you will: • Perform final inspection tasks on all switches and part orders being shipped, • Train production personnel in effective methods to control processes, • Prepare reports for all findings, • Position has the authority to “shut down” non-conforming processes after notifying Supervisor, • Prepare and enter NCRs (Non-Conformance Reports), • Write Customer Improvement Initiative (CII) for repetitive problems, • Report violations of ISO standard to the Cell Leader / Manager, • Responsible (along with team members from product engineering, manufacturing engineering and production) for the creation/implementation of process control charts for all critical processes Maintain safe and clean working environment by complying with procedures, rules, and regulations, • Conserve resources by using equipment and supplies as needed to accomplish job results, • Contribute to team effort by training others in performance of inspection tasks as needed, • Inspect all work prior to passing it on to the next operation, • Has a High School diploma, GED or combination of work experience and skill development, • Ideally has 1 - 3 years of experience working in a manufacturing environment, • Has an ability to read and interpret drawings, schematics, bills of materials, wiring and ladder diagrams desirable, • Must have basic computer skills in MS Word and Excel Experience using an ERP system desirable, • Work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles, • Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-100%), • Lifting Demands:, • Lift up to 75 pounds on an occasional basis floor to waist with assistance, • Lift up to 40 pounds on a frequent basis floor to waist, • Carry up to 40 pounds on an occasional basis up to 25 feet, • Push/Pull up to 40 pounds on a frequent basis, • Push/Pull more than 40 pounds on an occasional basis with assistance, • Postural Demands:, • Standing – continuous, • Walking – continuous, • Bending/stooping – frequent, • Squatting/kneeling – frequent, • Lifting – frequent, • Miscellaneous Demands:, • Griping, manipulation, fingering –continuous, • Variable hand/power tool use – frequent Pay Range is typically between $20 - $23 per hour Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications. G&W Electric offers a comprehensive benefits package that includes: • Medical, Dental and Vision Insurance, • Short and Long-Term Disability, • Life Insurance, • Health club membership program and reimbursement, • Employee Assistance Program, • Tuition Reimbursement, • 401 (k), • Annual Profit Sharing, • Vacation Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Learn more about our company by watching this video: G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

In some cases, you will split the county with another inspector if there is enough volume for two inspectors. We contract with inspectors at a county level.

Job Description Fab Werks is a steel fabrication company that is looking for a self-motivated individual with the ability to work independently to join our team. We offer a great culture, competitive benefits, and on the job training. Primary Responsibilities: • Perform 1st piece, In-process & Final inspections of parts to drawings, work orders, customer instructions, and any other specifications., • Visually inspect and measure parts using tape measure, caliper, and angle gage., • Familiar with equipment calibration process, proper use, handling, maintenance and preservation of measuring equipment and gages., • Maintains necessary inspection logs and writes inspection reports., • Communicate quality problems and work with engineering and leads to support, investigate, and resolve quality issues., • 3 + years manufacturing (Quality background a plus), • Ability to read and interpret drawings (Manufacturing experience a plus)., • ISO experience a plus., • Must be able to work in a fast-paced environment and adjust quickly to changing priorities., • Physical ability to lift 50 lbs.

Job Description Overview If You’re Great at Sales, We’ve Got the Career for You Are you a natural at connecting with people and closing deals? At Orkin, we’ll turn your drive and people skills into a successful, long-term sales career – with uncapped earning potential and the backing of the most recognized name in pest control. As an Orkin Sales Inspector, you’ll offer homeowners genuine peace of mind by providing trusted protection backed by over 120 years of expertise, the Orkin Guarantee, and a brand customers already trust. You’ll also enjoy award-winning training, career development, and the satisfaction of helping families protect their most valuable investment, their home. Why Orkin? At Orkin, we do more than eliminate pests – we protect health, homes, and peace of mind by providing many different services, including: · Attic cleanouts for wildlife issues · Crawl space remediation · Termite treatments and complete pest control solutions · Full home exclusions using metal and professional-grade sealants We are driven by a shared mission and grounded in values that define everything we do: · Safety · Professionalism · Empathy · Integrity · Innovation With a reputation built over more than a century and a team-first culture, you’ll feel supported from day one – with the freedom and tools to succeed. Responsibilities What You’ll Be Doing · Conducting full-home inspections (from attic to crawl space) · Build trust by explaining your findings clearly and recommending the best treatment options. · Close sales by showcasing the value, protection, and long-term benefits of Orkin’s services · Manage appointments, follow-ups, and documentation using a company-provided iPad. · Work independently, prioritize your schedule, and maximize leads and self-generated opportunities. · Represent Orkin with professionalism, empathy, and integrity every step of the way. What’s In It for You? · Top Earning Potential: Average First Year Earnings between $70,000 and $100,000 (base + commission) · Uncapped Commission: The more you sell, the more you earn · Company Vehicle: Gas card included · Paid Training: No pest control experience required – we’ll teach you everything. · Benefits that Go Beyond: o Medical, Dental, Vision, & Life Insurance o 401(k) with company match o Paid vacation, sick leave, and holidays o Employee Stock Purchase Plan, tuition reimbursement, and scholarship opportunities · Recognition & Awards: Top performers can earn exclusive annual incentive trips and advancement opportunities Qualifications You’d Be a Great Fit If You: · Love meeting new people and helping solve real problems · Are confident, competitive, and goal-driven · Can work independently and stay organized · Don’t mind climbing, crawling, or working in various weather conditions. Minimum Requirements: · High School Diploma or equivalent required · Use a ladder safely within the manufacturer’s weight capacity. · Lift and carry up to 50 lbs. · Safely access crawl spaces, attics, confined spaces, rooftops, etc. · Wear personal protective equipment (PPE), which sometimes requires an OSHA-compliant respirator. Orkin is an Equal Opportunity/Protected Veterans/Individuals with Disabilities Employer #ORKAPP 12/8/2025

Job Description Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: • To verify property occupancy. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities • Most common type of inspection should only take 5-6 minutes., • Complete the inspection within 4 days after it is assigned., • Report general property conditions and make a determination of occupancy based on industry standards., • Take 9+ photos of the property with brief comments., • Complete a short form in an app., • Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory.Requirements (to be considered you must have the following):, • Computer with an internet connection, • Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas), • Smartphone (Android or iPhone), • Printer Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR Dt66WTCBpp

Position Summary: Quality Control Associate (Entry Level).Inspect and document vehicles for carrier damage.Verify reported vehicle damage on and off rail cars.Help manage facility access until repairs are completed.Transmit damage document to the OEM reporting sites (Data Entry).Report damages in th

In the Quality Inspector role, you will be responsible for inspection and quality services to ensure company products and processes meet customer, company, and other specifications.

The Quality Control Inspector is responsible for real time opening, inspections, disposition and re-wrapping of all REF Inspect Returns merchandise. The Quality Control Inspector reports issues to the QC Inspection Lead or QC Manager for documentation, and researches customer account comments and in

Inspector is responsible for building inspection schedule, expenses and taxes.

Aerotek - - Responsibilities: Assemble parts and subassemblies using templates, measurements, and blueprints.Ensure proper fit and function by examining connections and fastening components securely.Verify completed assemblies by taking accurate measurements.Perform basic preventive maintenance and

PrideStaff - - Responsibilities: Perform tasks in production process for manufacturing component parts; Maintain tidy work areas; Follow detailed instructions to meet safety and quality requirements; Stand for 8-hours and work OT as needed.

Aerotek - JobID: JP-005851384 [Production Operator / Assembly Line Worker] As a Mechanical Assembly Worker at Aerotek, you'll: Perform mechanical assembly on different electronic products; Read and interpret blueprints, and quality-check the final products; Perform other duties as assigned.

Installer] - PT or FT / Easy Payments With Competitive Pay Rates / Flexible Scheduling / Access to Handy's Large Customer Base - As a Handy Pro Furniture Assembler you'll: Be responsible for for assembling a variety of furniture pieces in our customers' homes; Assemble a wide range of furniture item

This Jobot Job is hosted by: Daylen Quichocho.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.We are a large, full-service hospital organization providing a wide range of medical services including emergency care, heart and cancer treatment, maternity with a L

Here at Scotts Miracle-Gro there is no such thing as a typical day.Our culture is constantly energized by new and exciting growth opportunities and at a rapid pace.Below are details on an open job.If the role interests you and you would like to be considered we encourage you to apply!.This hourly ro

Crane Worldwide Logistics - - Responsibilities: Establishes and publishes weekly inventory count, spot audit, and quality audit schedules.Communicates and coordinates inventory count, spot audit, and quality audit schedules with Warehouse Supervisors.Directs the work of any personnel assigned to th

Crane Worldwide Logistics - - Responsibilities: Establishes and publishes weekly inventory count, spot audit, and quality audit schedules.Communicates and coordinates inventory count, spot audit, and quality audit schedules with Warehouse Supervisors daily.Directs the work of personnel assigned to

Specialist - Driver Operations (Dispatching and Planning).QC) is a premier transportation solutions company in North America.QC and its subsidiaries provide expertise in bulk liquid chemical, intermodal and dry bulk transportation, logistics management, tractor and trailer repair and maintenance, co

Crane Worldwide Logistics - - Responsibilities: Establishes and publishes weekly inventory count, spot audit, and quality audit schedules.Directs the work of personnel assigned to the quality audits and/or inventory counts by the Warehouse Supervisors.Provides daily written and electronic copies of

William Charles Construction, a MasTec Company, is hiring for an experienced Roadway Project Manager within the Springfield, IL & surrounding areas.Prior experience managing various road & highway projects is vital to the success of this role.This location-based position encompasses worksites throug

We are seeking a dedicated and experienced Quality Control Manager to oversee our quality assurance processes and ensure compliance with industry standards.The ideal candidate will play a crucial role in maintaining the integrity of our products by implementing effective quality management systems.M

In this job you will perform a variety of sub-assembly and/or assembly operations of basic complexity.Prepare work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.Position parts and subassemblies by

Electric, LLC, a Quanta Services company, has built long-standing working relationships and an industry-wide reputation as the single source solution to our customer's electrical utility construction and maintenance needs.MJE values integrity, is inspired by our work, and is invested in delivering q

In this job you will perform a variety of sub-assembly and/or assembly operations of basic complexity.Prepare work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.Position parts and subassemblies by

ProLogistix - - Responsibilities: Sample finished items for comparison to standards and specifications; Communicate quality results or findings to the Line Leads as discovered; Conduct facility and line GMP inspections as required; Conduct line or equipment inspections to verify cleaning and accept

This company is looking for PREMIER candidates to fill their open position of.We are partnered in helping a growing and well-established commercial restoration company find qualified and talented individuals like yourself.They are interested in highly-motivated and proactive individuals to fill thei

We are seeking a dedicated and experienced Quality Control Manager to oversee our quality assurance processes and ensure compliance with industry standards.The ideal candidate will play a crucial role in maintaining the integrity of our products by implementing effective quality management systems.M

Our team members are at the heart of everything we do.At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose.If you want to make a difference at the center of health, come join our innovative company

The Final Inspector is responsible for performing routine checks, tests, gauging and instrument inspections of finished goods.

Project Manager, New Product Development.The Project Manager is responsible for the overall scope, schedule, cost management, risk management, and communication activities for the assigned development projects.The Project Manager also ensures that all customer and company cost, quality, and timing r

Quality and Inventory Specialist - (Mon - Thur) - First Shift.Establishes and publishes weekly inventory count, spot audit, and quality audit schedules.Communicates and coordinates inventory count, spot audit, and quality audit schedules with Warehouse Supervisors daily so that supervisors can assig