Trabajos lighting technician en Elizabeth, New JerseyCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred., • Familiarity with computerized fleet maintenance and parts inventory systems preferred. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $35.00/Hr.

Job Description The Role Liberty Science Center (LSC) is seeking a creative and skillful Exhibit Technician. The primary focus of this position is on the daily care and upkeep of all exhibitions featured at LSC. This role will also include fabrication, installation, and maintenance of in-house, traveling and off-site exhibitions. Ideal candidates will be required to diagnose, troubleshoot and research successful solutions for exhibit carpentry, electrical, mechanical and computer issues. The Exhibit Technician reports to the Senior Manager of Exhibit Services. What You’ll Bring You take pride in providing exceptional customer service. A skilled problem-solver and communicator, you are able to work just as well collaboratively as you do independently. You have a thorough understanding and knowledge of electrical, mechanical, computer hardware/software, carpentry, and AV systems. What You’ll Do Exhibit Technician will: Responsible for daily operations of all Liberty Science Center’s exhibits, including daily start-up and shut-down, and ensuring all exhibits are operationally functional during all times the building is open to the public, including evening and private events Responds to daily calls from the front line exhibit floor staff and volunteers regarding assistance with exhibit operation and maintenance issues Troubleshoots electrical and mechanical problems down to the component level to determine root cause of issue and recommend corrective action Operates oscilloscopes, generators, meters, hand & power tools; service & test computers, and understands their use and function Develops, tests, implements, evaluates and tracks preventative maintenance programs for exhibits Provides support for in-house fabrication and outside firms in the installation/dismantle of Liberty Science Center exhibits Maintain record keeping of exhibit files, histories and inventory Establish preventive maintenance schedule, that includes cleanliness of electronic components environment Utilize mechanical drawings, schematics, and product manuals towards repair and maintenance of exhibit components Maintain a clean, organized, and safe work environment. Observe safety and risk management procedures in public areas and work spaces Other responsibilities, as needed Preferred Knowledge, Skills, and Abilities Knowledgeable in the use of basic carpentry techniques, hand tools, power tools, basic electrical wiring and lighting, paints and adhesives, and associated safety practices Ability to read and understand schematics and product & maintenance manuals Strong troubleshooting and problem-solving skills on electrical, mechanical, and computer components Experience with model railroads is a plus Excellent verbal and written communication skills Ability to juggle multiple projects while ensuring quality of work Ability to work in a fast-paced environment, able to analyze situations responding quickly to deliver effective solutions Strong organizational skills Preferred Qualifications and Experience College degree or equivalent education (technical or trade school) required Requires at least 2 years in computer diagnostics, mechanics, fabrication work, carpentry, metal work, lighting and/or electrical work Knowledge and experience with shop equipment Ability to read, analyze and interpret design circuit diagrams, schematics, shop/fabrication drawings, and standard business documents. Ability to write reports, business correspondence, and procedural guides. Ability to effectively present information and respond to questions from co-workers and the public Work Culture at a Glimpse LSC prides itself on fostering a culture that enables all employees to experience a sense of pleasure, passion, and purpose while in the workplace. We believe in embracing and driving change, inspiring fun and learning, and creating a positive and family-friendly team spirit. Our differences as individuals (race, gender, age, cultural heritage, physical ability, education and lifestyle) are an asset and contribute to our ability to drive innovation. Lastly, at the heart of our work culture is the commitment to delivering a “wow factor” through our exceptional customer service to not only our guests but also one another. Schedule This is a full-time, 40 hours per week, non-exempt position. The ideal candidate must be available to work weekends, evenings, holidays, and early mornings as business needs or special events may require. Given that LSC is a seven-day-a-week operation, all employees must be able to work a flexible schedule as business requires. Travel Limited travel, if any. Physical Demands The Exhibit Technician is required to be on their feet a majority of the day and use their hands to manipulate tools and materials. The Exhibit Technician will need to perform diagnostics via visual and audio cues. The Exhibit Technician should be comfortable working at various heights, including working on ladders and lifts. Furthermore, the Exhibit Technician should be comfortable maneuvering through large crowds, as well as being in tight spaces and working in potentially dusty conditions. The ability to lift 40 lbs. will be necessary. Training will be provided to the Exhibit Technician for the safe operation of the following lifts; scissor, toucan and fork lift. Compensation Compensation for this position is expected to be between $50k-$55k annually. However, the final offer is commensurate based on skills, education, certifications, and experience. In addition to compensation for salary, you will receive compensation in the form of generous benefits, including, but not limited to: Medical, dental, vision and life insurance 403(b) company match up to 3% Generous paid vacation time Additional week of vacation after 4 years of full-time service Unlimited sick days Long-term disability coverage Flexible spending accounts Commuter benefits Pet insurance LSC Membership 25% staff discount in the LSC store 15% staff discount in the cafeteria To Apply: Please submit a resume and cover letter highlighting why this role and this organization are a good fit for you. Liberty Science Center is an equal opportunity employer committed to fostering an inclusive and innovative environment with the best employees. We provide employment opportunities without regard to age, race, color, ancestry, national origin, religion, disability, sex, gender identity or expression, sexual orientation, military service, marital status, or any other protected status in accordance with applicable law. We know that you may not check every single box in this job description. If you are passionate about our mission and interested in this role, we encourage you to apply even if your experience doesn’t perfectly align with every requirement listed. If there are preparations we can make to help ensure you have a comfortable and positive interview experience, please let us know. Compensation details: 50000-55000 Yearly Salary PI433bee497f39-25405-41280805

Job Description ⚡ Join a Growing Electrical Team That Values Quality, Flexibility, and Your Future! ⚡ Position: Residential Electrical Technician Company: Sure Electric LLC Pay Range: $18 - $25 per hour + Performance & Year-End Bonuses Industry: Electrical / Controls (Residential, Commercial) Location: Marlboro, NJ Job Overview Sure Electric LLC is looking for an experienced Residential Electrical Technician to join our residential electrical team. This full-time position is ideal for a dedicated professional who excels at troubleshooting and rapid diagnostics. You will be the face of our company to homeowners, diagnosing electrical failures—from interior wiring and panel issues to exhaust fans and lighting fixtures. We offer the tools, training, and growth opportunities to help you succeed in your career. Who We Are Based in Marlboro, NJ, Sure Electric LLC is a full-service electrical contractor serving residential, retail, and commercial customers, with a strong focus on our partnerships. Our team is known for precision, professionalism, and top-tier service. At Sure Electric, we foster a workplace where growth is encouraged, tools are provided, and work-life balance is valued. Learn more about us at www.sureelectricllc.com Key Responsibilities • Arrive on time and maintain consistent daily attendance, • Deliver excellent communication and customer service during each interaction, • Troubleshoot, diagnose, install, and repair electrical components in homes and businesses, • Communicate effectively with our in-office management team to report diagnostic findings, provide updates, and coordinate next steps for repairs or replacements., • Manage inventory of tools and materials in the company vehicle to ensure high first-time complete rates., • Collaborate with dispatchers for efficient scheduling and timely communication with customers, • Document work completed, including photos and summaries, via service software Qualifications • 3+ years of consistent electrical experience, • Working knowledge of local and National Electrical Code, • Strong diagnostic skills and the ability to clearly explain technical issues to both homeowners and our internal office team., • Must have basic hand and power tools, • Maintain a valid and clean driver's license, • English-speaking preferred Benefits • Medical, Dental, and Vision Insurance, • Health Savings Account (HSA), • Life and Disability Insurance Options, • Long term disability available, • Additional terms available, • 401(k) Retirement Savings Program with company match, • Paid Time Off (Holidays, Vacation, Sick Days), • Bi-Weekly Pay Cycle, • Performance Bonus and Year-End Bonus Opportunities, • Company Vehicle and Uniforms Provided, • Paid Training and Certifications, • Personal Tool Replacement Program, • Tech Package (Smartphone or Tablet), • Employee Rewards, Contests, and Recognition Programs Schedule • Monday - Friday, Full-Time, • Availability for occasional weekends and overtime required Work Location • Onsite job locations daily | Based out of: Sure Electric LLC, Marlboro, NJ 07746 Equal Employment Opportunity Statement We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status.

Job Description Facilities & Transportation Maintenance Technician Department: Facilities / Operations Reports To: Facilities Manager / Management Employment Status: Full-Time Location: Cotton Funeral Service Schedule: Based on operational needs; weekend, evening, and holiday availability may be required Position Summary The Facilities & Transportation Maintenance Technician is responsible for supporting the daily operation, appearance, safety, and readiness of Cotton Funeral Service facilities, grounds, and company vehicles. This position performs groundskeeping, basic facility maintenance, vehicle care, transportation, deliveries and pickups, funeral home removals, and other operational support duties. The Technician is expected to take an active role in identifying facility or vehicle issues and reporting them to management before they interfere with funeral home operations. This is a hands-on position requiring dependability, professionalism, attention to detail, and the ability to work independently. Essential Duties & Responsibilities Groundskeeping & Exterior Maintenance • Maintain the exterior grounds of funeral home properties in a clean, safe, and professional condition., • Remove trash, debris, leaves, branches, and other materials from exterior areas., • Sweep and maintain sidewalks, entrances, driveways, parking lots, and other exterior areas., • Perform seasonal groundskeeping duties as assigned., • Remove snow and ice and apply salt or ice-melting products to sidewalks, entrances, and other designated areas when required., • Maintain outdoor trash receptacles and designated waste areas., • Inspect exterior areas for hazards, damage, lighting issues, or other conditions requiring attention., • Notify management of landscaping, structural, safety, or maintenance concerns requiring outside service. Facility Maintenance & Upkeep • Perform routine inspections of funeral home facilities and report maintenance concerns., • Complete minor repairs and maintenance tasks within the employee's training and ability., • Replace light bulbs and perform other basic building upkeep., • Assist with moving furniture, equipment, supplies, and other materials as needed., • Assist with setting up and breaking down rooms for funeral services, meetings, or special events when requested., • Monitor common areas for maintenance or safety concerns., • Immediately report plumbing leaks, electrical issues, HVAC problems, damaged equipment, or other significant facility concerns to management., • Coordinate access for approved maintenance vendors or contractors when directed by management., • Maintain maintenance tools, supplies, storage areas, and equipment in an organized and safe condition. Fleet & Vehicle Responsibilities • Maintain the cleanliness and professional appearance of company vehicles., • Wash and clean company vehicles according to the established schedule and as needed., • Clean vehicle interiors, windows, and other surfaces., • Ensure vehicles have adequate fuel and fill fuel tanks as required., • Conduct routine visual inspections of company vehicles., • Check and report concerns involving:, • Tires and tire pressure, • Exterior and interior lights, • Windshield wipers, • Visible fluid leaks, • Warning lights, • Vehicle damage, • General cleanliness and appearance, • Monitor vehicle mileage and maintenance schedules., • Notify management when vehicles are approaching scheduled oil changes, inspections, tire service, registration renewals, or other required maintenance., • Transport vehicles to and from approved repair shops, dealerships, inspection facilities, car washes, or other service providers as directed., • Maintain vehicle maintenance or mileage records as required., • Immediately report accidents, vehicle damage, warning lights, mechanical problems, or unsafe operating conditions., • Ensure company vehicles are returned to their designated locations and properly secured after use. Transportation, Deliveries & Pickups • Transport supplies, documents, equipment, flowers, memorial items, and other materials between funeral home locations and approved destinations., • Pick up supplies, equipment, parts, and other business-related items as directed., • Make deliveries to funeral home locations, cemeteries, churches, vendors, families, or other authorized locations as assigned., • Transport company vehicles between locations when necessary., • Obtain receipts, signatures, or other documentation for deliveries and purchases when required., • Communicate delays or problems with assigned pickups or deliveries to management promptly., • Safeguard company property and materials while in transit. Removal Responsibilities • Assist with or perform removals and transportation of deceased individuals in accordance with company procedures, applicable law, and management direction., • Respond professionally and respectfully when interacting with families, hospitals, nursing facilities, hospice facilities, medical examiner offices, and other institutions., • Assist with safely transferring deceased individuals using approved equipment and procedures., • Maintain the dignity and respectful treatment of deceased individuals at all times., • Ensure removal vehicles and equipment are clean, properly stocked, and ready for use., • Follow company identification, documentation, and chain-of-custody procedures., • Immediately report any unusual circumstances, incidents, injuries, or concerns occurring during a removal., • Maintain strict confidentiality regarding deceased individuals and their families. Operational Support • Assist funeral directors, management, and other departments with reasonable operational needs., • Transport equipment, chairs, supplies, caskets, flowers, or other materials when properly trained and directed., • Assist with preparing facilities before services or special events., • Respond to urgent facility or transportation needs when assigned., • Help maintain storage rooms, garages, utility areas, and workspaces in an organized condition., • Receive deliveries and ensure items are placed in the appropriate location., • Perform other duties as assigned based on funeral home and operational needs. Safety Responsibilities • Follow all company safety procedures., • Operate company vehicles safely and in accordance with applicable traffic laws., • Use appropriate personal protective equipment when required., • Use proper lifting and transfer techniques., • Immediately report workplace injuries, vehicle accidents, property damage, unsafe conditions, or equipment failures., • Do not perform electrical, plumbing, mechanical, structural, or other specialized repairs beyond the employee's training or authorization., • Maintain a clean and safe work environment. Required Qualifications • High school diploma or equivalent preferred., • Valid driver's license required., • Driving record acceptable under the company's automobile insurance requirements., • Ability to safely operate company vehicles., • Ability to perform physical and outdoor work in varying weather conditions., • Ability to follow written and verbal instructions., • Strong reliability, punctuality, and time-management skills., • Ability to work independently and complete assigned responsibilities without continuous supervision., • Ability to communicate professionally with management, coworkers, vendors, families, and members of the public., • Basic knowledge of vehicle care and maintenance preferred., • Previous facilities, maintenance, groundskeeping, transportation, funeral service, or similar experience preferred. Physical Requirements This position regularly requires physical activity, including: • Standing and walking for extended periods., • Bending, reaching, pushing, pulling, and climbing stairs., • Working indoors and outdoors in varying weather conditions., • Safely lifting and moving supplies, equipment, and other materials., • Participating in the safe transfer and transportation of deceased individuals., • Entering and exiting company vehicles frequently., • Performing repetitive cleaning and groundskeeping activities. Employees must be able to perform the essential functions of the position with or without reasonable accommodation. Professional Expectations Because this position operates within a funeral service environment, the employee is expected to: • Maintain a professional appearance and demeanor., • Treat deceased individuals with dignity and respect., • Interact compassionately and professionally with grieving families., • Maintain strict confidentiality., • Follow management direction and established procedures., • Remain productive throughout the scheduled workday., • Take initiative in identifying work that needs to be completed., • Avoid excessive personal phone use or other activities that interfere with job responsibilities., • Remain accessible and responsive to supervisors and management during scheduled working hours., • Notify the appropriate supervisor before leaving an assigned work area or property when required., • Accurately report completed assignments and outstanding maintenance concerns. Attendance & Availability Reliable attendance and punctuality are essential functions of this position. Funeral home operations may require flexibility based on service schedules, removals, weather conditions, transportation needs, and other operational requirements. Employees may be required to work evenings, weekends, holidays, or adjusted schedules based on business needs. Other Duties This job description identifies the primary responsibilities of the position but is not intended to include every possible duty. Employees may be assigned other reasonable duties consistent with the operational needs of Cotton Funeral Service. Equal Employment Opportunity Cotton Funeral Service provides equal employment opportunities to qualified applicants and employees and prohibits discrimination or harassment based on characteristics protected by applicable federal, state, or local law.

Job Description Join the BNE Real Estate Group team as a Full-Time Senior Maintenance Associate at Water's Edge in Harrison, NJ, and dive into an exciting, hands-on role that offers daily challenges and opportunities for growth. In this live-on/onsite position, you'll be integral to ensuring our properties are well-maintained and safe for residents, main duties are work orders, turns and preventative maintenance tasks. The Senior Maintenance Associate is responsible for performing the day to day maintenance operations as necessary at the community and ensuring that the asset is meeting the objectives of ownership and management from a maintenance perspective. If you're ready to take on this exciting opportunity, we want to hear from you! Schedule: Monday-Friday 8am-4pm; emergency on-call required (rotated between team members) Job Responsibilities: Minimum Required Qualifications: • High school diploma or equivalent, • 5+ years experience as a maintenance technician within residential property management, • Proficient in computer programs, including Microsoft Office and Yardi, • Ability to work with minimal supervision, • Well organized with excellent time management skills, • Knowledge of rules, regulations and laws regarding property management, • Maintain regular and punctual attendance, • Work overtime hours as required to complete assignments/projects, • Work in cold/hot/dusty/loud environment, • Comply with all company policies and procedures, • Professional Image, • Strong Verbal Skills, • Strong customer service orientation, • Valid New Jersey Driver's License Maintenance • Receive and perform the necessary workload allocation from maintenance manager., • Help determine the type of materials, supplies, machinery, equipment and tools to be used, bought, and stocked, • Manage the flow and distribution of all materials and supplies, • Perform when necessary the completion of assigned maintenance service requests in a timely manner, • Complete daily inspection of property during your walks and notify Managers of any issues, • Maintain the upkeep of grounds, amenities, building exteriors and leasing office, parking lots and other common areas, • Prep and paint apartments based on turn schedule, • Prepare make ready units, including removing trash, cleaning and painting, • Paint common areas, • Assist maintenance team with snow removal and landscaping, • Replace, repair or adjust locks, cylinders, latches, door checks, springs knobs, hinges and window blinds, • Replace, repair or adjust receptacles, plates, sockets, switches, and lighting fixtures, • Replace, repair or adjust speedy connectors, washers, faucets, cartridges, flush meter, other plumbing parts, toilet seats, toilet hardware, showerheads, shower rods and curtains, • Install smoke alarms and any other fire safety devices, • Grout and replace wall tiles, • Clear local waste line and drain stoppages, • Clean filters for HVAC, • Perform maintenance work/tasks that can affect business operations including emergency repairs and turnovers, • Perform maintenance work/tasks that can have a significant financial impact including emergency repairs, turnovers, and capital expenditure projects, • Document and repair any leaks, damage, debris and security issues, • Document and repair maintenance concerns on available apartments, models, amenity spaces, and/or common areas, • Assist with the preventative maintenance program, • Inspect the quality of market ready apartments, • Obtain maintenance bids on behalf of management, • Assist with the move-in and move-outs of all residents including scheduling and performing apartment inspections and resident orientations, • Assist management with other projects, as requested and required, • Supervise the work of 3rd party vendors and contractors, • Participate in the emergency on-call program Administrative • Follow procedures and systems to ensure orderly, efficient workflow, • Ensure all administrative paperwork is accurate, complete and submitted on a timely basis Resident Retention • Maintain excellent customer service with the residents and building staff, • Respond and resolve resident concerns, complaints and requests in a timely manner to ensure resident satisfaction, • Ensure proper response of all community emergencies with staff, residents, buildings, etc. within company guidelines to minimize liabilities (i.e., criminal activity on community, employee/resident injuries, fires, floods, freezes, etc.). Personnel Management • Report to maintenance manager employee complaints and grievances, • Provide support to staff to encourage team work and lead as an example in creating a harmonious environment Safety • Learn and ensure compliance with all company, local, state and federal safety rules., • Ensure that unsafe conditions are corrected in a timely manner, • Follow a "safety first" principle Physical Demands • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is required to stand and walk. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision and ability to adjust focus.

Job DescriptionBenefits: • Health insurance, • Opportunity for advancement, • Paid time off, • 401(k), • Employee discounts, • Flexible schedule Position Summary The Maintenance Technician is responsible for maintaining a safe, clean, and fully operational Planet Fitness club. This position performs preventative maintenance, troubleshooting, repairs, and facility upkeep to ensure members and team members enjoy a positive experience in a clean, well-maintained environment. The Maintenance Technician will work closely with club management to complete work orders promptly, minimize equipment downtime, and uphold Planet Fitness brand standards. Essential Duties and Responsibilities Facility Maintenance • Perform routine inspections of the club to identify maintenance needs and safety concerns., • Complete preventative maintenance on fitness equipment and club facilities., • Repair or coordinate repairs for cardio equipment, strength equipment, tanning beds, HydroMassage units, Total Body Enhancement machines, massage chairs, and other club amenities., • Maintain HVAC systems, lighting, plumbing fixtures, electrical components, doors, locks, flooring, ceiling tiles, and walls., • Ensure restrooms, locker rooms, showers, and common areas remain in excellent working condition., • Respond promptly to maintenance requests and emergency repairs.Equipment Maintenance, • Diagnose and repair fitness equipment to minimize downtime., • Perform scheduled lubrication, adjustments, calibration, and replacement of worn components., • Maintain accurate maintenance logs for all equipment inspections and repairs., • Coordinate with approved vendors for warranty repairs and specialized service.Preventative Maintenance, • Follow established preventative maintenance schedules., • Conduct regular inspections of life safety equipment, emergency lighting, fire extinguishers, AEDs, and exit signs., • Monitor equipment performance and recommend replacement or upgrades when necessary., • Ensure all maintenance work complies with company standards and local building codes. Knowledge, Skills & Abilities • Strong troubleshooting and problem-solving skills., • Knowledge of hand and power tools., • Ability to read maintenance manuals and technical documentation., • Excellent organizational and time management skills., • Ability to prioritize multiple work orders., • Strong communication and interpersonal skills., • Ability to work independently with minimal supervision., • Basic computer skills for completing work orders and maintenance logs.Physical Requirements, • Frequently lift, push, and pull up to 75 pounds., • Ability to stand, walk, bend, kneel, climb ladders, and work overhead for extended periods., • Comfortable working in varying temperatures and confined spaces when necessary., • Ability to safely operate maintenance equipment and tools.Work Schedule, • Full-time position., • Flexible schedule including mornings, evenings, weekends, and holidays as business needs require., • On-call availability for emergency maintenance situations may be required.Performance Expectations The Maintenance Technician will be evaluated on: • Completion of preventative maintenance schedules., • Response time to maintenance requests., • Equipment uptime and operational readiness., • Quality and timeliness of repairs., • Club cleanliness and facility condition., • Safety compliance., • Documentation accuracy., • Teamwork and professionalism.Planet Fitness Core Values The Maintenance Technician is expected to support the Planet Fitness mission by: • Creating a clean, safe, and welcoming environment., • Delivering a Judgement Free Zone® experience., • Demonstrating reliability, accountability, and professionalism., • Supporting team members and members with respect and courtesy., • Maintaining the highest standards of cleanliness, safety, and operational excellence.

Job DescriptionBenefits: • Dental insurance, • Vision insurance Job Title: Facility Technician Location: Linden, NJ Shift: 8:00 AM – 4:30 PM Position Overview The Facility Technician is responsible for performing a range of interior facility maintenance tasks to ensure a safe, functional, and efficient working environment. This includes routine repairs, light electrical work (up to 240 volts), basic plumbing, and support for general upkeep across the facility. The ideal candidate is hands-on, proactive, and comfortable working independently while maintaining high safety standards. Key Responsibilities • Perform routine inspections and general maintenance tasks throughout the facility., • Troubleshoot and repair basic electrical components such as outlets, switches, and lighting fixtures (up to 240 volts)., • Replace and maintain overhead lighting, including high-bay warehouse lights., • Assist with minor plumbing tasks, including unclogging drains, replacing sink components, and general water line troubleshooting., • Use hand and power tools to repair or install doors, shelving, workstation components, and other facility-related items., • Support internal moves and setups, including furniture assembly and equipment relocation., • Maintain cleanliness and safety across maintenance work areas., • Respond to maintenance requests and urgent repair issues in a timely manner. Qualifications • 1–2 years of experience in facility maintenance, general trades, or building repairs., • Comfortable working with interior electrical wiring up to 240 volts., • Ability to use measuring tools and interpret basic technical instructions., • Skilled in identifying and safely using tools such as screwdrivers, pliers, wrenches, and cordless power tools., • Ability to lift up to 49 lbs and work at heights up to 20 feet using ladders or lifts., • Strong problem-solving skills and the ability to work independently., • High school diploma or equivalent preferred., • Trade school certification or equivalent hands-on experience is a plus.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: The Facilities & Maintenance Technician is a critical role responsible for the upkeep, repair, and general maintenance of our physical infrastructure. You will support our engineering and research teams by ensuring a safe, organized, and fully functional work environment. As a non-exempt employee, this role is eligible for overtime and requires a reliable, "can-do" attitude. Key Responsibility Areas: • General Maintenance: Perform routine repairs including plumbing, basic electrical (lighting, switches), carpentry, and painting., • HVAC & Systems: Monitor building automation systems and perform basic preventative maintenance on HVAC units and air filtration systems., • Laboratory Support: Assist in the assembly of lab benches, installation of equipment utilities (compressed air, cooling water lines), and minor structural modifications., • Vendor Coordination: Escort and supervise external contractors (e.g., janitorial, landscaping, specialized MEP) to ensure work is completed safely and correctly., • Safety & Compliance: Conduct weekly safety walkthroughs, maintain fire extinguishers/eyewash stations, and ensure compliance with OSHA and local building codes. Support chemical management process with compliant chemical storage and disposal efforts., • Inventory Management: Track and order maintenance supplies, tools, and hardware to ensure zero downtime for facility needs., • Emergency Response: Serve as a point of contact for facility-related emergencies during and occasionally after standard business hours.Ideal Experience & Skillsets:, • Experience: 3+ years of experience in commercial facilities maintenance, preferably within a laboratory, manufacturing, or high-tech environment., • Technical Proficiency: Strong understanding of building systems (MEP), power tools, and diagnostic equipment. Ability to read technical schematics and construction drawings., • Experience with cryogenic fluid and high vacuum systems is a bonus., • Physical Requirements: Ability to lift up to 50 lbs, climb ladders, and remain on your feet for extended periods., • Certifications: High school diploma or GED required. Trade school certification or a specific license (HVAC, Electrical, Plumbing) is a major plus. Forklift and scissor lift operation will be required, previous certifications are desired., • Soft Skills: Strong communication skills and the ability to prioritize tasks in a fast-paced, evolving startup environment.Company Benefits:, • Salary range $26/hour - $34/hour, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics. It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Summary Bennett Heat Treating & Brazing Co., Inc. is seeking an experienced and self-directed Maintenance Manager to oversee all production-equipment and facility-maintenance activities. Although the title is Maintenance Manager, this is an individual-contributor position with no direct reports. The successful candidate will personally troubleshoot, repair, inspect, and maintain electrical and mechanical systems throughout the facility. A strong Maintenance Technician or Maintenance Supervisor who is ready to assume full ownership of the maintenance function may be considered. This position works frequently with 480V electrical systems, DC voltage, water pumps, vacuum pumps, furnace elements, fans, hydraulics, and other industrial equipment. The Maintenance Manager will also maintain repair records, manage preventive maintenance activities, monitor MRO inventory, assist with quality and safety initiatives, and support corrective actions. The current maintenance workload is approximately 40% preventive maintenance and 60% emergency or corrective repair. A major objective of this position is to improve the established maintenance program and move the facility toward a more preventive and reliability-focused model. Key Responsibilities Electrical Maintenance and Troubleshooting • Diagnose, troubleshoot, and repair electrical failures affecting production and facility equipment., • Work safely with electrical systems operating at up to 480V AC, as well as DC-voltage systems., • Inspect electrical components, wiring, connections, motors, controls, switches, relays, contactors, heating elements, and related equipment., • Use appropriate testing equipment to identify electrical faults., • Replace defective electrical components according to applicable safety requirements., • Identify recurring electrical failures and recommend permanent corrective actions., • Report unsafe electrical conditions immediately., • Coordinate specialized electrical work with qualified contractors when required., • Maintain accurate documentation of electrical repairs and recurring problems. Electrical issues are currently the most common type of maintenance emergency within the facility. Mechanical Maintenance • Troubleshoot and repair mechanical systems and production equipment., • Maintain water pumps, vacuum pumps, furnace elements, fans, motors, hydraulic equipment, and related components., • Inspect equipment for wear, vibration, leaks, overheating, unusual noise, and other signs of mechanical failure., • Repair or replace defective bearings, seals, motors, belts, pumps, fans, valves, and mechanical components., • Support alignment, adjustment, lubrication, and replacement activities., • Evaluate whether equipment should be repaired, rebuilt, or replaced., • Reduce repeat failures through root-cause analysis and corrective action., • Maintain orderly tools, parts, and maintenance work areas. Vacuum Furnace Maintenance • Perform routine and corrective maintenance on vacuum furnaces and related systems., • Support the maintenance of vacuum pumps, heating elements, fans, controls, and supporting equipment., • Investigate vacuum leaks, heating issues, electrical faults, and equipment-performance concerns., • Coordinate furnace downtime and repairs with Operations and Production., • Learn facility-specific furnace systems through company-provided on-site training., • Maintain accurate records of furnace inspections, repairs, and preventive maintenance activities. Previous vacuum furnace experience is a strong advantage but is not required. The company will provide on-site training to a candidate with strong transferable electrical and mechanical skills. Preventive and Predictive Maintenance • Maintain and improve the established preventive maintenance program., • Schedule preventive maintenance according to equipment condition, manufacturer recommendations, usage, production priorities, and operational risk., • Coordinate maintenance activities with Operations and Quality., • Complete inspections, lubrication, adjustments, component replacements, and other scheduled tasks., • Track recurring failures and adjust maintenance intervals when appropriate., • Apply predictive maintenance methods when practical., • Reduce dependence on emergency repairs by identifying issues before equipment failure., • Maintain preventive maintenance records and completion logs., • Recommend improvements that increase equipment reliability and service life. The facility currently operates at approximately a 40% preventive and 60% reactive maintenance mix. The long-term goal is to move toward a predominantly preventive maintenance model. Production Equipment Repair • Respond promptly to production-equipment failures., • Determine the cause, scope, and operational impact of equipment problems., • Prioritize repairs based on safety, production requirements, quality risks, and equipment criticality., • Communicate estimated downtime and repair status to Operations and Production., • Complete emergency and corrective repairs safely and efficiently., • Test equipment after repairs to confirm safe and reliable operation., • Monitor recently repaired equipment for recurring problems., • Escalate concerns when specialized vendor or contractor support is required. Facility and Building Maintenance • Schedule and complete routine and emergency facility maintenance., • Inspect building systems and infrastructure for safety and operational concerns., • Coordinate repairs involving utilities, lighting, electrical systems, mechanical systems, plumbing, HVAC, and structural components., • Support general maintenance throughout the industrial facility., • Coordinate qualified vendors and contractors when specialized services are required., • Monitor contractor work for safety, quality, and completion., • Maintain documentation related to building repairs and facility-service activities. MRO Inventory and Maintenance Planning • Maintain an organized inventory of maintenance, repair, and operations parts., • Identify critical spare parts for production equipment., • Monitor stock levels and reorder points., • Help prevent production delays caused by unavailable replacement parts., • Plan repairs by identifying necessary labor, tools, components, materials, and contractor support., • Coordinate with purchasing and approved vendors to obtain parts., • Evaluate component cost, availability, quality, and lead times., • Maintain organized maintenance storage and work areas., • Document part usage and replacement history. Quality Management System Support • Perform maintenance activities in accordance with machine and Quality Management System requirements., • Maintain complete and accurate repair and preventive maintenance records., • Work with Quality personnel when equipment performance may affect product quality., • Support internal, customer, supplier, and external audits., • Assist with corrective action requests related to equipment, facilities, processes, or safety., • Participate in root-cause analysis., • Implement and document approved corrective actions., • Provide maintenance records and supporting documentation during reviews and audits. Safety, Health, and Environmental Support • Follow all workplace safety requirements and industrial maintenance procedures., • Identify and help resolve health, safety, and environmental concerns., • Apply lockout/tagout and hazardous-energy-control procedures., • Report unsafe equipment, working conditions, or operating practices., • Ensure equipment is properly shut down and secured before maintenance., • Coordinate repairs for conditions that create safety or environmental risks., • Help ensure contractors follow facility safety requirements., • Promote safe work practices throughout the maintenance function. Maintenance Documentation • Maintain accurate daily maintenance logs., • Document equipment failures, troubleshooting steps, completed repairs, replacement parts, downtime, and follow-up actions., • Maintain preventive maintenance schedules and completion records., • Track open maintenance requests., • Record recurring equipment problems and corrective measures., • Provide management with updates regarding equipment condition and maintenance priorities., • Maintain records required for quality, safety, and audit purposes. Process Improvement and Training • Identify opportunities to improve equipment reliability, workflow, safety, and production efficiency., • Recommend solutions for recurring equipment or facility problems., • Participate in process-improvement initiatives., • Help standardize maintenance procedures and documentation., • Train employees on equipment care, basic troubleshooting, operating considerations, and maintenance-related safety when appropriate., • Share technical knowledge with Operations, Production, and Quality personnel., • Support the development of a preventive maintenance culture. Required Qualifications Must-Have Qualifications • At least four years of industrial, manufacturing, production, or facility-maintenance experience., • Hands-on electrical troubleshooting experience., • Ability to safely work with or around 480V AC and DC electrical systems., • Strong mechanical troubleshooting and repair experience., • Experience maintaining pumps, motors, fans, hydraulic systems, or comparable industrial equipment., • Knowledge of preventive and corrective maintenance., • Ability to diagnose equipment failures independently., • Familiarity with maintenance planning and MRO inventory., • Strong understanding of industrial safety practices., • Willingness to work in an industrial environment., • Ability to maintain accurate repair, inspection, and preventive maintenance records., • Strong critical-thinking and problem-solving skills., • Self-directed work style with initiative and perseverance., • Ability to prioritize multiple maintenance requests., • Strong verbal and written communication skills., • Ability to work effectively with Operations, Production, Quality, management, contractors, and vendors., • Willingness to occasionally support urgent repairs outside regular working hours. Preferred Qualifications • Vacuum furnace maintenance experience., • Experience with vacuum pumps and furnace heating elements., • PLC troubleshooting experience., • Hydraulics and pneumatics experience., • Welding experience., • HVAC maintenance experience., • Predictive maintenance experience., • Experience supporting a Quality Management System., • Experience with corrective action requests and root-cause analysis., • Familiarity with computerized maintenance management systems., • Lockout/tagout training., • Previous maintenance leadership or facility-ownership experience., • Technical education, apprenticeship, license, or certification in industrial maintenance, electrical systems, mechanical systems, or a related field.

Job DescriptionIndustrial Maintenance Technician Join a leading food manufacturing operation where your maintenance expertise will directly support equipment reliability, production uptime, food safety, and quality goals. This is an opportunity to work across a diverse facility environment while supporting mechanical, welding, plumbing, HVAC, and electrical maintenance needs. Job Duties & Responsibilities -Troubleshoot, repair, and maintain mechanical, hydraulic, pneumatic, and basic electrical systems on production and facility equipment. -Perform scheduled preventive and corrective maintenance, document work in the electronic maintenance management system, and identify potential equipment failures or unsafe conditions. -Perform welding, fabrication, pipe fitting, machine shop work, and repairs involving pumps, HVAC systems, lighting, plumbing, heaters, forklifts, and other facility equipment. -Follow all food safety, cGMP, OSHA, and facility requirements while maintaining clean, organized, and safe work areas. Required Skills & Experience -Trade school graduate with 3-5 years of industrial maintenance experience or equivalent hands-on maintenance background. -Strong mechanical troubleshooting, repair, metalworking, and problem-solving skills with the ability to read mechanical, pneumatic, and hydraulic blueprints or schematics. -Ability to work independently and as part of a team, prioritize tasks, meet deadlines, perform basic shop math, and maintain attention to detail. -Computer proficiency with Microsoft Word and Excel, willingness to learn maintenance management software, and knowledge of safe work practices including Lockout/Tagout, PPE, electrical safety, fall protection, and confined-space procedures. Preferred Skills & Experience -Welding experience/certification and experience operating forklifts and scissor lifts. -Previous food manufacturing experience, particularly with flavor, liquid, or powder blending equipment. Apply Today Bring your industrial maintenance skills to a facility where reliability and safety matter. Apply today through Synerfac Technical Staffing to be considered for this opportunity. Disclaimer: By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/

Job Description East Group/ SalSon Logistics is seeking an experienced Diesel Mechanic / Heavy-Duty Truck Technician to join our Fleet Maintenance team. The Diesel Mechanic is responsible for diagnosing, repairing, inspecting, and maintaining our fleet of commercial trucks, tractors, trailers, and related equipment. This position plays a critical role in keeping our fleet safe, reliable, and on the road. We are looking for a hands-on mechanic who takes pride in their work, understands the demands of a fast-paced trucking operation, and can effectively diagnose and repair mechanical, electrical, air, brake, and other heavy-duty vehicle systems. Essential Duties & Responsibilities Diagnose, troubleshoot, repair, and maintain Class 8 tractors and other commercial fleet equipment. Perform preventive maintenance inspections and scheduled fleet maintenance. Diagnose and repair diesel engine and related mechanical issues. Inspect, diagnose, and repair air brake and braking systems. Diagnose electrical and electronic system problems using appropriate diagnostic equipment. Repair and maintain suspension, steering, cooling, exhaust, and air systems. Perform repairs to truck and trailer lighting and electrical systems. Diagnose and repair starting and charging systems, including batteries, starters, and alternators. Perform tire inspections and identify conditions requiring repair or replacement. Inspect and repair trailers, including brakes, lighting, suspension, doors, landing gear, and related components. Perform DOT-related vehicle inspections and identify safety defects. Complete preventive maintenance services, including oil changes, filters, lubrication, fluid inspections, and other required services. Respond to equipment breakdowns and assist with emergency repairs when necessary. Identify additional maintenance or safety concerns during inspections and communicate findings to Fleet Maintenance management. Perform road tests when appropriate to verify repairs. Use diagnostic software, scan tools, meters, and other equipment to troubleshoot vehicle systems. Complete repair orders and accurately document labor, parts, repairs, inspections, and services performed. Communicate parts and material needs to the appropriate supervisor or parts personnel. Maintain tools, equipment, and work areas in a safe and organized condition. Follow company safety procedures and applicable DOT requirements. Work closely with drivers, Fleet Maintenance, Operations, and other departments to minimize equipment downtime. Perform additional maintenance and repair duties as assigned. Qualifications Previous experience as a Diesel Mechanic, Diesel Technician, Fleet Mechanic, Truck Mechanic, or Heavy-Duty Technician preferred. Experience working with Class 8 tractors and commercial trucks strongly preferred. Knowledge of diesel engines and heavy-duty vehicle systems. Knowledge of air brake systems, suspension, steering, electrical systems, and preventive maintenance. Ability to diagnose mechanical and electrical problems effectively. Ability to read and understand repair manuals, service information, wiring diagrams, and diagnostic information. Ability to safely operate shop equipment, power tools, diagnostic equipment, and hand tools. Ability to work independently and as part of a fleet maintenance team. Strong troubleshooting and problem-solving abilities. Strong attention to safety and quality. Valid driver's license required. CDL is a plus but not required unless designated for specific job responsibilities. Preferred Qualifications Experience maintaining a large commercial trucking fleet. Class 8 tractor and trailer repair experience. DOT inspection experience. ASE certifications are a plus. Experience with computerized diagnostic equipment. Experience diagnosing aftertreatment and emissions systems. Experience with ABS, air brake, electrical, and electronic control systems. Welding and fabrication experience is a plus. Experience performing roadside or mobile repairs is a plus. Physical Requirements This position requires the ability to perform the physical duties normally associated with commercial truck and diesel repair, including: Standing, walking, bending, kneeling, crouching, and reaching throughout the workday. Working underneath and around commercial vehicles and equipment. Using hand tools, power tools, and heavy-duty shop equipment. Climbing into and out of trucks and accessing various areas of commercial equipment. Safely lifting and moving parts, tools, and equipment consistent with the requirements of the position, with assistance or mechanical devices when appropriate. Working in a shop environment that may include exposure to noise, grease, oils, fuels, exhaust, weather conditions, and moving equipment. Reasonable accommodations may be provided to qualified individuals with disabilities in accordance with applicable law. Key Skills Diesel Repair | Class 8 Trucks | Fleet Maintenance | Preventive Maintenance | Air Brakes | Electrical Diagnostics | Truck Repair | Trailer Repair | DOT Inspections | Heavy-Duty Equipment | Troubleshooting | Roadside Repair What We're Looking For We're looking for a mechanic who doesn't simply replace parts — we want someone who can diagnose the problem, determine the proper repair, and get the equipment safely back on the road. The right candidate will understand that in transportation, equipment downtime matters. You should be comfortable prioritizing repairs, communicating problems clearly, and working with the Fleet Maintenance team to keep SalSon's operation moving. About SalSon Logistics SalSon Logistics is a transportation and logistics company supporting a diverse commercial fleet and fast-paced transportation operation. Our Fleet Maintenance team plays an essential role in supporting our drivers, customers, and operations by keeping equipment safe, compliant, reliable, and ready for service. East Group Logistics is an Equal Opportunity Employer.

Job Description Field Technician Maryland Energy Advisors (MDEA) is a rapidly growing energy management firm delivering energy efficiency and sustainability programs for utilities and communities across the region. As part of our continued expansion, we are seeking a qualified Home Energy Auditor to support residential energy efficiency and home weatherization programs throughout New Jersey. In this role, you will conduct in-home energy assessments for income-qualified and residential customers, identifying energy-saving opportunities, educating homeowners, and supporting the delivery of utility-funded energy efficiency measures. You will work closely with program managers, field services staff, contractors, and utility partners to ensure audits are completed accurately, safely, and in compliance with program guidelines and quality standards. The ideal candidate is detail-oriented, customer-focused, and comfortable working in the field. Strong communication skills, technical aptitude, and a commitment to delivering a positive customer experience are essential. If you enjoy hands-on work, problem-solving, and making a tangible impact on household energy affordability and comfort, this is an excellent opportunity to grow with a mission-driven organization supporting New Jersey communities. PRIMARY RESPONSIBILITIES • Support the day-to-day operations of a residential utility energy efficiency and home weatherization program, ensuring high-quality service delivery and a positive customer experience for eligible households., • Generate and manage audit leads through door-to-door outreach and community-based engagement within assigned neighborhoods, representing the program professionally and in alignment with utility guidelines., • Perform in-home and visual energy assessments of residential properties, evaluating HVAC systems, windows, doors, insulation, appliances, lighting, and other building components to identify energy efficiency opportunities., • Educate residents on household energy use, comfort, health, and safety, and provide clear guidance on practical actions and utility incentives that can reduce energy costs., • Prepare and deliver energy assessment reports with personalized recommendations, ensuring accurate documentation and data entry in program tracking systems., • Install eligible no-cost or low-cost direct-install energy-saving measures in accordance with program requirements and safety protocols., • Introduce and refer residents to additional utility-sponsored programs and services, supporting increased program participation and comprehensive energy savings., • Perform other duties as assigned to support the successful execution of program field operations. REQUIRED QUALIFICATIONS • High school diploma or equivalent., • Minimum of 1 year of professional experience in residential energy auditing, building science, weatherization, or utility-funded energy efficiency programs., • Strong knowledge of residential energy audits, weatherization practices, and direct-install energy efficiency measures., • Excellent communication and interpersonal skills, with the ability to effectively engage and educate customers from diverse backgrounds., • Strong problem-solving skills and ability to respond to field-based challenges with professionalism and sound judgment., • Ability to work independently while also collaborating effectively as part of a field services team., • Comfort using technology, including handheld data collection devices, mobile applications, and program tracking systems., • Ability to perform the physical requirements of the role, including bending, stooping, reaching, climbing stairs, and working in various residential environments., • Flexible availability, including occasional evenings and weekends based on customer and program needs., • Valid driver’s license with a clean driving record and reliable transportation., • Ability to pass a criminal background check and drug screening, as required by utility and program partners. PREFERRED QUALIFICATIONS • BPI certification preferred. If not currently certified, MDEA will provide training and support to obtain BPI certification., • Bachelor’s degree in Energy, Environmental Studies, Communications, Business Administration, or a related field (or equivalent professional experience)., • Experience supporting utility-sponsored energy efficiency or demand response programs for utilities, state or local governments, or nonprofit organizations., • Prior experience with door-to-door outreach, customer acquisition, or lead generation in residential settings., • Bilingual (English/Spanish or other languages commonly spoken in New Jersey communities) is a plus., • Proficiency in Microsoft Office applications, including Word, Excel, Outlook, and PowerPoint., • Familiarity with New Jersey Clean Energy or other regional home weatherization and residential energy efficiency programs., • Strong time-management skills and demonstrated ability to manage a high volume of field activities across multiple neighborhoods. WORK ENVIRONMENT • This position is primarily field based, with most of the time spent conducting in-home energy audits and assessments at residential properties., • Auditors work independently in customers’ homes across assigned service territories, traveling daily between audit locations., • Work is performed in a variety of residential settings and may involve basements, attics, crawlspaces, and utility rooms., • This role requires regular interaction with homeowners and occupants, emphasizing professionalism, safety, and customer service., • Limited administrative and reporting tasks are completed remotely or from home using mobile and cloud-based program systems., • Work schedules may include occasional evenings or weekends to accommodate customer availability and program needs. BENEFITS MD Energy Advisors offers competitive salaries and benefits. We put a premium on work-life balance, offering flexibility with our remote team. We also offer: • Medical, dental and vision health insurance, • 401k, • Paid time off and paid holidays, • Wellness Reimbursement, • Professional Development Reimbursement, • Great company culture with outstanding growth opportunity Maryland Energy Advisors is an Equal Opportunity Employer/M/F/Disability/Vet.

Job DescriptionAbout the Role: Humbug Holiday Lighting of Suburban Essex is looking for a hands-on, energetic Holiday Lighting Installation Technicians to join our seasonal crew in Millburn, NJ! This is a fun, fast-paced opportunity to brighten up neighborhoods and spread holiday cheer while earning great seasonal income. If you love working outdoors, don't mind heights, and take pride in a job well done — this role is for you! Responsibilities: • Install, hang, and secure holiday lighting displays on residential and commercial properties, • Safely operate ladders and work at heights to complete roofline, gutter, and tree lighting installations, • Remove and properly store holiday lighting systems at the end of the season, • Troubleshoot and repair lighting issues, including bulb replacements and electrical connections, • Maintain and organize equipment, tools, and lighting inventory in company vehicles, • Deliver excellent customer service and represent the company professionally on job sites, • Follow all safety protocols and procedures while working on ladders and rooftopsRequirements:, • Comfortable working at heights and on ladders for extended periods, • Prior experience in landscaping, construction, electrical, or outdoor installation is a plus, • Reliable, punctual, and able to work a flexible seasonal schedule including weekends, • Strong attention to detail and a commitment to delivering quality, clean installations, • Valid driver's license preferred; ability to travel to job sites throughout Suburban Essex County, • Ability to lift up to 50 lbs and perform physical outdoor work in varying weather conditions, • Positive attitude and strong customer-facing communication skillsAbout Us: Humbug Holiday Lighting of Suburban Essex is a trusted local service company proudly serving the Millburn, NJ area and surrounding communities. Our holiday lighting division has built a reputation for stunning, professionally installed displays that keep customers coming back year after year. We're a tight-knit team that values hard work, reliability, and having a little fun while making the season bright!

Job Description The Role: Bring Luxury Homes to Life We don’t do basic TV hangs. Springboard Automation integrates invisible technology into multi-million dollar spaces. We need a sharp, field-proven Technician & Programmer who knows high-end residential integration and wants a company that actually respects their craft. If you have a killer eye for clean rack-building, know your way around a network, and can program premium control systems, you’ll fit right in. You’ll be joining an awesome, supportive team that has your back on every job site, backed by the best tools, ongoing training, and premium field support in the industry. What You’ll Do • Program & Commission: Set up and configure high-end lighting, shading, and automation systems (Lutron, Savant, and more)., • System Optimization: Test, troubleshoot, and fine-tune complex residential networks and AV systems, both on-site and remotely., • Precision Installation: Install TVs, premium audio, and motorized shading systems where beautiful finishes, clean craftsmanship, rack-building, and attention to detail matter., • Collaborate: Work alongside an elite team that operates on a strict "No Ego, No Blame" policy. What You Need If you have 2+ years of experience in high-end residential AV, we want to hear from you. We are looking for a blend of the following: • Automation Experience: Familiarity with luxury control systems. Experience with programming Lutron HomeWorks or Savant is highly preferred., • The Fundamentals: A solid understanding of standard AV, home networking, WiFi, and signal flow., • Craftsmanship: Pride in your work—clean racks, hidden wires, and precise installations., • Low-Voltage: Experience with low-voltage wiring and cable management., • Physical & Logistics: Ability to lift 50 lbs, climb ladders, and a valid driver’s license. Travel Expectation Overnight travel is an essential function of this role because our projects take us where our clients go. • Primary Hubs: Projects in Philadelphia and NYC are common. Longer-distance travel may occur, including destinations such as Florida., • Fully Covered: All business travel beyond a normal commute is fully covered., • The Perks: We do things right: real hotels, not bargain rooms. Team dinners with drinks. Order the steak. Plus, you will receive a generous per diem for overnights. Why Work for Springboard Automation • PTO Match: PTO balance match if joining from another AV company, • No Red Tape: Fast tool approval. If it helps you do the job right, we buy it., • Travel Right: When we travel, we do it right. Real hotels (no motels), great team dinners, and a generous per diem for overnights., • The Gear: You’ll get your own set of tools, professional apparel, and an employee purchase program at cost., • Full Benefits: 401k with match, medical/dental/vision, and PTO + holidays. Compensation: $35–$48 per hour based on experience + a generous per diem for overnights. NOTE: This is a Lead to Senior Technician role (not an apprentice or entry-level position), with pay determined by skill, experience, and autonomy. The baseline requires a competent tech who can install, wire, and troubleshoot standard AV systems and networks with minimal supervision, while top-scale pay is reserved for an expert who can independently program complex automation systems from scratch, architect advanced networks, and completely spearhead multi-million dollar project sites. Employment Type: This is a full time, hourly, non-exempt role. About Springboard Automation For over 30 years, we’ve built a reputation for excellence. Our culture is built on five core values: Go Above and Beyond, Own the Problem, Say it Positive, Be a Trusted Resource, and Assure Team Happiness. We have a strict "No Ego, No Blame" policy. We win as a team and solve problems as a team. Ready to build systems you’re actually proud of? Apply today. Powered by JazzHR ZrC6K5FLlR

Job Description About Mantis We help organizations improve how their buildings perform by bringing together energy, facility operations, and sustainability into one connected approach. At Mantis, our teams work across the full lifecycle of a facility—from planning and design to field execution and long-term asset management—across commercial and industrial portfolios, data centers, and complex mechanical systems. Our work spans four core areas: Building Controls, Energy Efficiency, Energy Advisory, and Facility Management—covering HVAC/mechanical optimization, BMS/BAS and EPMS controls, lighting system upgrades, energy brokerage, roofing and building envelope assessments, construction management, and more. Whether you’re in sales, engineering, construction/project management, field operations, corporate, or technology, you’ll play a role in delivering these solutions and helping clients improve facility performance. Summary BMS Service Technician II diagnoses and resolves complex system issues in building management systems across commercial and mission-critical environments. This role ensures systems run reliably by completing service work from start to finish, reducing repeat issues, and maintaining consistent service quality Outcomes • >= 85% of service tickets resolved without return visit (First-Time Fix Rate) • Service issues resolved within SLA timelines across all priority tiers (MTTR), • >= 95% QA pass rate with <5% callbacks or rework, • <= 10% of tickets require escalation to senior technician or engineering, • 100% of service work documented accurately and submitted within required timeframe, • 100% compliance with site safety and security protocols, • Demonstrates ownership, accountability, and reliability in field execution Responsibilities • Independently troubleshoot, service, and commission BMS systems in mission-critical environments, • Diagnose and resolve hardware, software, and networked control system issues, • Execute service tickets from assignment through full resolution within SLA timelines, • Perform system upgrades, backups, restores, and configuration changes, • Execute commissioning and startup activities, including validation of system performance, • Install and configure control system components, including sensors, controllers, and panels, • Read and interpret control drawings to identify issues and implement solutions Minimum Qualifications • 3-5+ years of BMS, building automation, or HVAC controls experience, • Proficiency with Tridium Niagara (N4) or equivalent controls systems, • Strong troubleshooting capability across control systems (hardware, software, and networked systems) Working Conditions/Physical Requirements, • Work environment: Field-based role across commercial buildings, active construction sites, and mission-critical facilities., • Physical requirements:, • Standing, walking, climbing ladders, and working in mechanical spaces, • Lifting tools and equipment (up to ~50 lbs.), • Working in confined or high-access environments as needed, • Schedule expectations:, • Standard work hours with on-call rotation and emergency response requirements, • Travel required based on service and project needs (90%)Disclaimers This position description describes the general nature and level of work expected for this role. It is not intended to be a complete list of all duties, responsibilities, or qualifications. Responsibilities may change based on business needs, client demands, system changes, or economic conditions. Employees are expected to perform other job-related duties as assigned. Base Salary Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you? We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement? Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we’re committed to building an inclusive and equitable team—so if this role excites you, we’d love to hear from you, even if your experience doesn’t match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Currently, we have one opening in Baltimore, MD area for a full-time a Field Service Technician. The Field Service Technician (Level 3) will also respond to corrective maintenance cases to troubleshoot, test, and repair PV systems ensuring they are following safe practices while working.

Position Summary: We are seeking a dedicated Maintenance Technician to join our team at Aspen Riverpark Apartments, a 261-unit affordable apartment community located in Newark, NJ.

WillScot Corporation - - Responsibilities: Conducting service calls related to HVAC, plumbing and carpentry within the Branch territory; Explaining repairs and services to customers courteously, over the phone and in-person; Maintaining a safe working environment and practicing safe working habits i

Benchmark Senior Living - - Responsibilities: Perform repairs (minor and major); Implement preventive maintenance programs; Communicate condition to Maintenance Director; General maintenance work (light electrical, painting, carpentry); Maintain proper chemical handling and storage.

GreyStar - - Responsibilities: Complete work orders and preventative maintenance on property; Complete make-ready inspections and coordination; Track inventory and reorder supplies; Document service requests accurately; Assist in grounds maintenance and cleaning.

Grainger - - Responsibilities: Install and organize inventory systems in customer shops; Label, stock, and optimize maintenance products; Train customers on ordering technology; Travel Monday through Friday to U.

GreyStar - The Greyson [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and make repairs in

Those with no electrical experience should sign up on our.Apprenticeships & Helper positions.Service Professionals is a family-owned home services company serving most of New Jersey since day one.We do plumbing, heating, cooling, and electrical — and we're not a franchise.And we're building so

GreyStar - The Harper at Harmon Meadow [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and

Job DescriptionJob Description .Seeking full-time electrician with experience for residential and light commercial service and install work in Central NJ (Monmouth, Middlesex, Mercer).Hours are 8-4:30 M-F with some opportunities for overtime.Must have clean drivers license to operate company vehicle

GreyStar - 505 Summit [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and make repairs in

The electrician works under the supervision of the electrical foreman and makes sure we provide a quality electrical installation.This position has a clear career path to become a foreman and manager over a larger scope of work.Perform electrical installations of a multifamily and commercial nature.

GreyStar - Hudson River Waterfront Walkway - Responsibilities: Process and complete maintenance work orders from resident requests and preventative maintenance; Complete the make-ready process to prepare vacant units for leasing (pre-move-in inspections, punch lists, scheduling vendors); Track inven

This is a hands-on, highly technical role designed for a skilled technician who enjoys solving complex problems and working with a wide array of industrial electrical and automated production equipment.

The successful candidate will be responsible for installation, testing, calibration, modification, maintenance, inspection repair and troubleshooting of electrical instruments, equipment, devices, controls and machinery used in a public rail transportation system.Candidate must possess the ability t

We are seeking a skilled electrician to perform electrical work on various commercial projects throughout New Jersey.This role involves working on diverse tasks that require expertise in electrical systems and installations.Execute electrical work on commercial projects across New Jersey.Install and

Hoboken, New Jersey, United States.High school graduate or equivalent.At least 3 years of related commercial and industrial electrical maintenance experience.Varied electrical and mechanical experience.Proven understanding of electrical system components and theory.Ability to read and understand mec

This is a hands-on, highly technical role designed for a skilled technician who enjoys solving complex problems and working with a wide array of industrial electrical and automated production equipment.

We're one of the world's leading practitioners of circularity, transforming materials from the animal agriculture and food industries into valuable ingredients.Ingredients that nourish people, feed animals and crops, and fuel the world with renewable energy.The Electricianis responsible forperformin

The Superintendent invites qualified and interested persons to apply for the position of Electrician - Day within the Office of Facilities Management Project Control.This title is governed by the New Jersey Civil Service Commission; meaning that a candidate for the position will be placed as a provi

Lincoln Tech is hiring an Electrical Instructor in our Electrical and Electronic Systems program! If you're passionate about educating and inspiring future professionals, we want to hear from you! Whether you have teaching experience or not, Lincoln Tech has a strong history of guiding industry expe

Job DescriptionJob Description .Looking for a Full Time electrician with 5 years minimum.Must have clean driving record.Understand residential and commercial wiring.Can read blueprints and work alone or with a helper.

High school graduate or equivalent.At least 3 years of related commercial and industrial electrical maintenance experience.Varied electrical and mechanical experience.Proven understanding of electrical system components and theory.Ability to read and understand mechanical, electrical, and equipment

Junior Mechanical Electrician - $20-$25/hr - DOE.We are currently hiring Junior Mechanic Electricians with 2+ years of experience performing electrical installations in a commercial environment.Candidates are encouraged to apply ASAP as we have an immediate need in the Staten Island area.Please appl

Job DescriptionJob Description .AMEC Electric is seeking responsible, dedicated and reliable journeyman electricians to bring their talents to work with us.Are you looking for a career with an established company? Are you willing to do whatever it takes to bring your career to the next level and joi

The Superintendent invites qualified and interested persons to apply for the position of Electrician - Night within the Office of Facilities Management - Project Control.This title is governed by the New Jersey Civil Service Commission; meaning that a candidate for the position will be placed as a p

Install, examine, replace or repair electrical wiring, receptacles, switch boxes, conduits, feeders, coaxial cable assemblies, lighting fixtures and other electrical components.