Low maintenance jobs in Deer Park, New YorkCreate job alerts

Job DescriptionJob Description ABOUT THE JOBAdditional Information PHYSICAL REQUIREMENTS, including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking surfaces include ceramic tile "bricks" with linoleum in some food process areas. Height of work surfaces is between 36" and 48". Walking For short distances for short durations Delivery personnel must travel between the store and delivery vehicle and from the delivery vehicle to the customer's location. Sitting Paperwork is normally completed in an office at a desk or table Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72" high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas and beverages while performing "walking" and "climbing" duties. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24" - 30" and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required.Stooping/Bending Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day. Forward bending is also present at the front counter and when stocking ingredients. Crouching/Squatting Performed occasionally to stock shelves and to clean low areas. Reaching Reaching is performed continuously; up, down and forward. Workers reach above 72" occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Driving Deliver pizzas within a designated delivery area. A Team Member may make several deliveries per shift. Machines, Tools, Equipment, Work Aids Team Members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel. Driving Specific Job Duties Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver's license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery.

Job DescriptionCompany Description Customer Service Our Customer Service Representatives (CSRs) are the first contact with our customers - so we value their commitment to exceptional customer service, enthusiastic attitude and the ability to assist our customers through the ordering process. Get Paid to Talk! In addition to providing exceptional customer service to our customers through order taking, our CSRs gain valuable experience through assisting with in-store duties and learning the pizza delivery business. Our CSR's will Earn an hourly base pay of $16.00! Great Hours! Our CSRs work mostly on the weekends and in the evenings. It is a great after school job, second job, summer job or part-time job for anyone who is looking to work part-time hours. Schedules are flexible so we will always try to work with you. Opportunities! In our CSR position, you will have an excellent opportunity to learn the in-store side of the business and eventually move into management. Domino's Pizza is committed to promoting from within - most of our General Managers started as drivers and many started as CSRs. It is a stepping stone to advancement into our Management Development Program. To apply for a Customer Service position at Domino's Pizza, you must be at least 18 years of age and have excellent communication skills. Some computer experience is helpful. In addition, we are looking for applicants to work in a fast-paced team environment Job Description PHYSICAL REQUIREMENTS, including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking surfaces include ceramic tile "bricks" with linoleum in some food process areas. Height of work surfaces is between 36" and 48". Walking For short distances for short durations Delivery personnel must travel between the store and delivery vehicle and from the delivery vehicle to the customer's location. Sitting Paperwork is normally completed in an office at a desk or table Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72" high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas and beverages while performing "walking" and "climbing" duties. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24" - 30" and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. Stooping/Bending Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day. Forward bending is also present at the front counter and when stocking ingredients. Crouching/Squatting Performed occasionally to stock shelves and to clean low areas. Reaching Reaching is performed continuously; up, down and forward. Workers reach above 72" occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Machines, Tools, Equipment, Work Aids Team Members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel. Qualifications • Valid U.S employment authorization that allows you to work in the United States of America., • Friendly, • Works well with others., • Works well under stress of high paced environment., • Ability to multitask., • Able to respond to customer concerns., • Must be able to follow Team Sharma Domino’s Policies., • Must be able to work together as a team., • Must understand all store calls must be answered after the first ring Additional Information All your information will be kept confidential according to EEO guidelines.

The Assistant Property Manager will report directly to the VP of Building Management and Operations, and the VP of Affordable and Compliance Management. The duties of the position shall include, but are not limited to, the following: • Assist in tenant communications and correspondence including, but not limited to, coordinating distribution of late letters and notices to residents., • Assist with compliance reporting under the guidance of the Property Manager., • Assist tenants with inquiries, issues, sublets, assignments, and/or lockouts., • Assist in following up on all phone calls and web-based inquiries, daily., • Collaborate with property maintenance team on scheduling and status of work orders., • Utilize Yardi to create, manage and complete work orders, as well as assist maintenance staff with closing work orders., • Follow-up with residents regarding open work orders., • Receive and record all rental payments. Mail rent receipt to residents., • Process rental payments in Yardi PayScan, as needed., • Provide legal counsel relevant information regarding delinquent accounts and tenant issues., • Place orders, maintain maintenance and office supply stock, as well as coordinate special orders., • Coordinate service calls with vendors., • Walk and inspect property as needed., • Provide occasional tours to small groups visiting the property, as needed., • Build brand loyalty and achieve resident retention goals by ensuring the resident experience is consistently stellar., • Maintain ongoing communication with Property Manager, Building and Grounds manager, and at times the Owner/Landlord., • Assist in special projects., • Assist with creating the property newsletter., • Maintain flexible work schedule to be available for property events over weekends., • Assist with event planning for the properties., • Play an active role in supporting and having a presence in the community. Skills and Qualifications • Minimum of 3 years of property administration/management experience., • College degree preferred., • Knowledge of and understanding of Low-Income Housing Tax Credit financing and compliance is strongly desired., • Excellent written and verbal communication skills., • A sharp professional appearance., • Customer-focused mentality, ability to multi-task and work in a fast-paced environment., • Proficiency using Microsoft Office Suite, including Word and Excel., • Willingness and aptitude to use various property management software and tools. Other Duties: Please note this position description does not cover or contain a comprehensive listing of activities, duties or responsibilities required for this position. Duties, responsibilities, and activities may change at any time with or without notice. This is an hourly position with annualized salary range of $55k - $65k. This position is overtime eligible. Albanese Organization is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or veteran status, and other legally protected characteristics

Job Description About Check-Mate Industries At Check-Mate Industries, Inc., a leader in precision manufacturing, we’re shaping the future of industries like aerospace, automotive, firearms, cosmetics, and medical. Our Thomasville, GA and West Babylon, NY facilities are a hub of innovation, where your skills as a CNC Machinist Programmer will help deliver high-quality solutions to global customers. With over 50 years of excellence, we’re known for out-thinking, out-maneuvering, and out-performing the competition. Join a collaborative team that values your expertise, fosters growth, and prioritizes safety and inclusion. Why Join Us? • Career Advancement: Access training, certifications (e.g., NIMS), and pathways to leadership or specialized roles., • Innovative Environment: Work with cutting-edge CNC technology and industry-standard software like Mastercam., • Impactful Work: Craft precision parts for critical applications, from life-saving medical devices to law enforcement tools., • Comprehensive Benefits: Enjoy competitive health plans, paid time off, and retirement options (details provided during hiring)., • Program CNC Machines: Use Mastercam or similar software to create programs, offsets, and calculations for precise part fabrication., • Set Up & Operate Equipment: Configure vertical and horizontal CNC milling centers and other machines, selecting tools, fixtures, and materials based on blueprints or CAD designs., • Quality Control: Inspect finished parts with tools like micrometers, calipers, and gauges to ensure blueprint accuracy., • Assembly & Testing: Assemble parts into complete units and test functionality using jigs, fixtures, and precision instruments., • Maintenance & Troubleshooting: Perform routine machine maintenance, diagnose issues, and schedule repairs to maintain efficiency., • Collaboration: Work with engineers, programmers, and inventory managers to optimize processes and resolve challenges., • High School Diploma or GED from an accredited institution., • 1-5 years of experience with CNC machines and programming (entry-level candidates with relevant training encouraged to apply)., • Proficiency with Mastercam or similar CNC programming software., • Experience using measuring tools (e.g., calipers, micrometers, height/depth gauges)., • 3-5 years of machining experience in a manufacturing environment., • Familiarity with shop floor control software (e.g.,PLEX, IQMS MES, TrakSYS, E2 Shop System, MasterCam)., • Experience with CAD software (e.g., AutoCAD, SketchUp, SolidWorks)., • Work in a fast-paced industrial setting with moderate to loud noise (hearing protection provided)., • Stand, sit, or walk for extended periods; occasionally lift up to 50 pounds or reach overhead., • Requires close vision, color vision, and ability to read small print or computer screens., • Skill Growth: Master advanced CNC programming and work with state-of-the-art tools., • Variety & Impact: Contribute to diverse projects with real-world significance across multiple industries. Check-Mate Industries is an equal opportunity employer committed to fostering a diverse and inclusive workplace for all employees. Powered by JazzHR 43rTBdEcUa

Job Description RiseWell Community Services is looking for a full-time Supervisor for our Social Care Network to join our team! This individual will oversee the staff and operations of the Social Care Network (SCN) department, ensuring effective care coordination and service delivery with Lead Social Care Network entities. This role involves supervision, training, quality assurance, and collaboration with other agencies and stakeholders. The supervisor will also ensure compliance with policies, procedures, and relevant regulations. "This is a one-year, grant-funded position." QUALIFICATIONS: Bachelor’s Degree required. A minimum of three years’ experience in social work, care management, or a related field. Supervisory experience required. Valid and clean New York State driver's license. Fingerprinting, criminal record check, and approval from the NYS Office of Mental Health. CORE & ESSENTIAL RESPONSIBILITY: • Weekly direct supervision and training of staff, • Coordinate the weekly activities of the residence, • Establish monthly staffing schedules, • Direct oversight of documentation including progress notes, service plans, UMRs, • Monitor the development and implementation of service plans in conjunction with collateral service providers, program staff, and residents, • Oversee health office activities and medication management, • Coordinate residents’ admission and discharge processes and documentation weekly or as often as necessary, • Ensure maintenance of occupancy rates and rent collection, • Manage crisis situations and participate in on-call emergency coverage, • Provide supportive counseling, appropriate behavioral health intervention with residents daily, • Assist in hiring process and staff performance evaluations BENEFITS INCLUDE: • Comprehensive Medical/Dental/Vision, • Retirement 401K Savings Plan with Employer Match, • Generous Paid Time Off for Full-time and Eligible Part-Time Employees, • 13 paid Holidays for Full-time and Eligible Part-Time Employees, • Long and Short Term Disability, • Life Insurance, • Employee Assistance Program, • CALM App Subscription, • Flexible Work Schedules, • Career Growth & Promotional Opportunities, • Comprehensive Paid Training, • Supplemental Accident, Illness and Hospitalization Insurance, • Supplemental Pet Insurance, • Encouragement for Educational Professional Advancement, • Employee Perks & Discounts on Broadway shows, theme parks, and other attractions RiseWell Community Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. ABOUT US: Founded in 1972, RiseWell Community Services (RiseWell) is an innovative, multi-service, community-based social wellness agency. We are a major provider of health and wellness services, senior and children’s care, addiction recovery services, as well as affordable housing and support. RiseWell continues to serve thousands of community members across Suffolk, Nassau, Queens, Brooklyn, Bronx, and Manhattan. RiseWell has developed innovative, successful programs that are designed to meet the needs of vulnerable populations, such as individuals in recovery, those living with chronic medical conditions, adult home residents, the homeless, low-income seniors and at-risk children For more information about RiseWell Community Services, please visit our website .

Job DescriptionJob Title: Histotechnologist Job Description We are seeking skilled histotechnologists to join our growing lab on Long Island, focusing primarily on pathology. We offer four openings with flexible shifts, allowing candidates to choose from 1st, 2nd, or 3rd shifts and determine their start time. Training will be conducted over 1-2 weeks, Monday through Friday, on the candidate's chosen shift alongside the department manager. Responsibilities • Cut, stain, mount, and study human tissue specimens to provide data on tissue and organ functions, as well as the cause or progress of diseases, following standards and practices., • Conduct quality control and instrument check procedures, documenting all related records., • Prepare and manage paraffin, reagents, and solutions based on standard formulas., • Process human tissue specimens by cutting, staining, and mounting., • Handle stat specimens with care and precision., • Engage in the department's QA/PI program, enhancing performance through quality improvement activities., • Participate in Strategic Improvement Process activities and committee memberships as appropriate., • Collaborate effectively with peers, physicians, and healthcare team members., • Assume the role of Clinical Supervisor when needed., • Manage equipment and supplies, ordering when low or near expiration., • Perform preventive maintenance on image analyzers and slide makers, ensuring no use of expired reagents., • Maintain ongoing records, files, and reports, contributing to test script development and system testing., • Current NY State license as a Histology Technician or Clinical Laboratory Technologist., • Proficiency in specimen processing, data entry, laboratory operations, biology, and accessioning. The lab is staffed with approximately 70 employees and is equipped with up-to-date technology. The facility emphasizes a collaborative and supportive environment, focusing on anatomic pathology services across various specialties. Employees enjoy a comprehensive benefits package including 17 days of paid time off, medical, dental, and vision insurance, and a 401k/retirement plan. Job Type & Location This is a Permanent position based out of Plainview, New York. Pay and Benefits The pay range for this position is $83000.00 - $114400.00/yr. Health & Wellness Medical Insurance: Coverage for doctor visits, hospitalization, and prescriptions 1. Dental Insurance: Routine cleanings, X-rays, and procedures like fillings and root canals 2. Vision Insurance: Eye exams, glasses, and contact lenses 1. Mental Health Support: Access to therapy, counseling, and behavioral health services2. Wellness Programs: Gym memberships, health screenings, and wellness incentives3. Financial & Retirement 401(k) Plans: Often with employer matching contributions 1. Health Savings Accounts (HSAs) or Flexible Spending Accounts (FSAs): For out-of-pocket medical expenses 3. Life Insurance & Disability Coverage: Short-term and long-term disability insurance, accidental death and dismemberment (AD&D) 1. Time Off & Leave Paid Time Off (PTO): Vacation, personal days, and sick leave 1. Parental Leave: Maternity, paternity, and family leave options2. Extended Medical Leave: For serious health conditions or recovery2. Professional Development Tuition Reimbursement: Support for continuing education or certifications 1. Paid Training & Development: On-the-job training and career advancement programs 2 Workplace Type This is a fully onsite position in Plainview,NY. Application Deadline This position is anticipated to close on Oct 24, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Machine Shop Production Manager We are seeking a highly experienced and hands-on Production Manager to oversee daily machining operations in a fast-paced, high-mix, low-volume production environment. This role is responsible for coordinating labor, equipment, and workflows to meet production goals while driving safety, quality, and continuous improvement initiatives. The ideal candidate will bring a strong technical background in precision machining, effective leadership skills, and a collaborative mindset to align departmental performance with broader operational targets. This position reports directly to Plant Management and plays a critical role in optimizing throughput and ensuring customer delivery expectations are met. Key Responsibilities ▪ Manage the day-to-day operations of the machine shop, including CNC, conventional, and specialty machining equipment ▪ Oversee production schedules, labor planning, and resource utilization to ensure on-time delivery and operational efficiency ▪ Lead a team of machinists, set-up operators, and technical personnel, providing coaching, support, and performance feedback ▪ Collaborate closely with engineering, quality, maintenance, and planning teams to drive throughput, reduce downtime, and resolve technical issues ▪ Monitor key performance indicators (KPIs) such as safety, quality, delivery, and productivity, and report progress to senior management ▪ Support and participate in process improvement initiatives, root cause analysis, and corrective/preventive actions (CAPA) ▪ Identify capacity constraints, machine performance issues, and labor shortages, and implement timely solutions ▪ Coordinate with the Maintenance team to prioritize urgent repairs and ensure adherence to preventative maintenance routines ▪ Enforce and uphold company safety standards and regulatory compliance in accordance with OSHA and internal policies ▪ Foster a culture of continuous improvement, teamwork, accountability, and professional growth on the shop floor Requirements Machine Shop Production Manager We are seeking a highly experienced and hands-on Production Manager to oversee daily machining operations in a fast-paced, high-mix, low-volume production environment. This role is responsible for coordinating labor, equipment, and workflows to meet production goals while driving safety, quality, and continuous improvement initiatives. The ideal candidate will bring a strong technical background in precision machining, effective leadership skills, and a collaborative mindset to align departmental performance with broader operational targets. This position reports directly to Plant Management and plays a critical role in optimizing throughput and ensuring customer delivery expectations are met. Key Responsibilities ▪ Manage the day-to-day operations of the machine shop, including CNC, conventional, and specialty machining equipment ▪ Oversee production schedules, labor planning, and resource utilization to ensure on-time delivery and operational efficiency ▪ Lead a team of machinists, set-up operators, and technical personnel, providing coaching, support, and performance feedback ▪ Collaborate closely with engineering, quality, maintenance, and planning teams to drive throughput, reduce downtime, and resolve technical issues ▪ Monitor key performance indicators (KPIs) such as safety, quality, delivery, and productivity, and report progress to senior management ▪ Support and participate in process improvement initiatives, root cause analysis, and corrective/preventive actions (CAPA) ▪ Identify capacity constraints, machine performance issues, and labor shortages, and implement timely solutions ▪ Coordinate with the Maintenance team to prioritize urgent repairs and ensure adherence to preventative maintenance routines ▪ Enforce and uphold company safety standards and regulatory compliance in accordance with OSHA and internal policies ▪ Foster a culture of continuous improvement, teamwork, accountability, and professional growth on the shop floor

Job Description Summary Installs, maintains, alters, repairs, adjusts and tests plant wiring, electrical and electronic equipment which shall include but not be limited to lights, electric motors, machines, equipment controls, radios and communication systems, meters, clocks, attendance recording mechanisms, environmental control systems and utilities. This, however, does not prohibit other employees from changing general illumination lamps and bulbs where no assembly or disassembly of equipment is required. Duties and Responsibilities • Installs, maintains, alters, repairs, adjusts and tests plant wiring, electrical and electronic equipment which shall include but not be limited to lights, electric motors, machines, equipment controls, radios and communication systems, meters, clocks, attendance recording mechanisms, environmental control systems and utilities. This, however, does not prohibit other employees from changing general illumination lamps and bulbs where no assembly or disassembly of equipment is required., • May perform electrical repair, modification and maintenance of mobile industrial equipment as required., • Charges and repairs batteries and battery charging equipment., • May lubricate equipment during performance of assigned duties. May adjust electrical instruments with thermal or capillary sensing units pursuant to the task., • Uses all tools and equipment pursuant to the task, including hand or power equipment to hoist and move personnel and materials, except mobile cranes., • May transport tools, materials and equipment to and from job site which are to be used by employees in the Electrician job classification., • Performs related tasks as necessary in the completion of the employees primary work assignment in the Electrician job classification., • US Citizenship, able to obtain and maintain US DOT security clearance, • High School Diploma or GED, • Ability to work any shift, • Valid Driver's License, • Journeyman Electrician, • Industrial electrician, • Qualified in low voltage to high voltage, • Troubleshooting and install capabilities, • Industrial controller troubleshooting and experience

Job DescriptionSalary: $25-$30 Hourly Job description: Global Fueling Systems Inc. is looking forFueling Facility Wiring/Electrical Service Technicianin Long Island, New York. • Full-time We are a group of fun and motivated industry professionals. We are looking for you to join our team! Please send your resume or call at 631-815-1361 to schedule an interview. Global Fueling Systems Inc. is an equal-opportunity employer. We encourage applications from all qualified individuals without regard to race, color, religion, gender, sexual orientation, age, national origin, marital status, citizenship, disability, or veteran status. What Drives Us And You Our core values arent just words they shape how we work, grow, and succeedtogether. If youre the kind of person who takes pride in doing things right and enjoys being part of a team that supports each other, this is your kind of place. • Take CARE of Each Other If youre not a team player, this isnt your place. Were a team, and weve built a culture of support, respect, and collaboration., • ECSTATIC Customers Were proud to exceed expectations with service and precision., • Radical CANDOR We value honest, clear, and respectful communication even when it's tough. If you avoid feedback or cant give it constructively, youll struggle here., • Be QUICK, But Dont HURRY We execute with accuracy and urgency, never sacrificing quality for speed., • Retail sites (service stations and convenience stores), • Private customers (trucking companies, marinas), • Fuel dispensers, • Pumps, • Controllers, • Point of Sale (POS) systems, • Printers, • Fuel Management Systems, • Sensors, • Alarm systems, • Programming, • Probes, • Tanks and Tank Hardware, • Filters, • Tank level monitors, • Leak detection equipment, • Valves, • Piping and Fluid conveying systems, • Meters & Registers, • Plumbing, • Electrical, • Electronic systems, • HVAC, • Gaining experience in a new industry? We train on the job!, • Working for a stable, growing company? We have been in business for 53 years., • High school diploma or equivalency, • Electrical work experience in a petroleum equipment or other related industry preferred, • Low voltage experience preferred, • Good computer/tablet skills; knowledge of networking and computer hardware and software, • Programming, communication & data transfer experience preferred, • Good mechanical aptitude; able to safely operate hand tools, • A valid and clean drivers license, • Problem-solving abilities, • Excellent communications and customer service skills, • A positive attitude, project a professional tone, and provide clear concise information, • Ability to lead without constant supervision, dependable, dedicated, can-do attitude and willing to work and learn, • Must read, write, speak and understand English with exceptional analytical, communication, and interaction skills, • Willing to work overtime and on-call emergency, • Must be able to wear appropriate PPE in the facility and be able to physically perform all tasks in the field., • Troubleshoot, inspect, repair, maintain, and install all electrical systems, alarm systems, fuel equipment wiring, fuel dispensing systems, fuel management systems and various other types of electronic equipment in fueling facility., • Make recommendations for upgrades, repairs, maintenance, etc., • Calibrate and modify systems according to site needs, • Perform repairs and preventative maintenance on electronics, computers, and fuel dispensing systems, • Remove, replace and repair electrical wiring, alarms, and sensors of the fuel and tank monitoring systems, • Perform on-site compliance inspections and testing of aboveground and underground tank, • Perform service calls as needed on an after-hours basis, • Respond to emergency calls to complete service requests in a timely manner and ensure all requests are handled in a professional manner, • Resolve warranty calls, • Select materials and parts required to complete assigned repairs., • Operate and maintain tools and equipment safely to accomplish the assigned task and Maintain an adequate supply of parts for emergency repairs, • Comprehend customer requirements and assist in diagnosis, analysis and make appropriate recommendations, with an excellent work ethic, • Completes assigned tasks quickly, completely, and consistent with guideline, • Work safely in accordance with OSHA Standards, • Perform required prerequisite work necessary to obtain and maintain certification from original equipment manufacturers, • Prevailing Wage, • Medical, dental, and vision insurance, • Life insurance, • 401(k), • Paid holidays, • Paid vacation, sick time/personal time off, • Employee Discount Program, • Employee Assistance Program (EAP), • Flexible Spending Account (FSA), • Health Savings Account (HSA) You can find us at: Global Fueling Systems is an Equal Opportunity Employer and complies with all state and federal laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, or protected veteran or disabled status and will not be discriminated against.

Job Description We are Universe Home Services, a proud local business serving homeowners across Nassau and Suffolk counties with expert HVAC, Plumbing and Electrical solutions. Located in Farmingdale. Now Hiring: Full Time Residential HVAC Installers. You will play a key role in providing top-notch services to ensure that our customers' homes are safe, and energy efficient. Join us in making homes across Long Island better, safer, and more comfortable for everyone. You will be responsible for accurately installing HVAC equipment in residential structures. Ideal candidates will have knowledge of HVAC equipment, codes, and proper installation procedures. Effectively communicates to the customer and answers related questions as to operations and functions. What you Will do: • Replace/Install any heating, air conditioning, or refrigeration equipment or complete systems., • Test electrical circuits and components for continuity, using electrical test equipment., • Lay out and connect electrical wiring between the controls and equipment according to the wiring diagram, using an electrician's hand tools., • Install, connect, and adjust thermostats, humidistats, and timers., • Comply with all applicable standards, policies, and procedures, including safety procedures and the maintenance of a clean work area., • Inspect and test systems to verify compliance with plans and specifications and to detect and locate malfunctions., • Responsible for delivery and removal of equipment needed to complete the installation., • Ensures company property, vehicles, and tools are being effectively used and maintained., • Completes all paperwork in a neat, accurate, thorough, and timely manner., • Minimum of 3-5 years prior experience as an HVAC Installer., • High School Diploma or equivalent., • Valid Driver's license with clean driving records, • EPA Certification., • NATE certification is a plus., • Knowledge of mechanical and electrical codes., • Basic understanding of low-voltage control wiring and high-voltage connections., • Teamwork oriented., • Ability to work in crawl spaces and attics. We offer a competitive salary plus a great benefits package including: • Medical, Dental, and Vision., • 401(k) Match, • PTO and paid holidays, • STD, LTD, Life, and AD&D insurance., • Referral program Who We are: Universe Home Services has been in business for 70 years (and counting), helping homeowners with their HVAC, Plumbing and Electrical needs. We are consistently growing in terms of services, employees, and customers and with that growth we have maintained valued employees for over 20 years! Universe Home Services is an equal opportunity employer. We bring unique talents together to build something special. • Ability to explain technical information to customers.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Competitive salary, • Free food & snacks, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development *This is not an entry level position. You must have real experience and will be expected to be productive from the beginning. Duties and Responsibilities (not comprehensive of all tasks) Diagnose and resolve IT related hardware, software, and network issues Configuration and installation of new IT equipment at client locations Installation, setup, and support of VoIP systems Configure user accounts in Active Directory, O365 and other applications Track customer issues and resolutions in our ticketing system Proactively monitor, manage, and support client networks Perform software and hardware updates and maintenance Investigate security breaches and vulnerabilities Collaborate with other team members to solve complex issues Recommend hardware and software improvements to clients Monitor data backups and perform file restorations or disaster recovery Rebuild/re-image computers and transferring/saving user profiles and data Resolve virus and malware issues VPN setup and troubleshooting Backup/Restoration and Disaster Recovery Requirements and Qualifications At least 2 yrs. experience in an IT support related position ConnectWise and MSP experience +++ Cisco and Meraki experience +++ Thorough knowledge of Windows 10 and Mac OS X Cybersecurity experience or certification a plus, but not required. Familiarity with mobile devices such as iPhones, iPads, Android, etc. Prior knowledge of service ticketing systems Experience installing firewalls, routers, switches, IP cameras, phone systems and wireless access points Running and terminating low voltage wiring (Cat cable, RJ45, RJ11) Professional attitude and appearance Ability to lift/push/pull up to 50lbs and maneuver around close quarters equipment locations Availability during weekday business hours and a rotating on-call schedule, if needed Must have a reliable vehicle and be available to travel within an assigned geographical region Desired Qualities and Skills Strong troubleshooting and critical thinking skills Ability to multitask, prioritize, and manage time efficiently Excellent verbal and written communication skills Self-motivated with the ability to work in a fast-paced environment Why work here We offer a great opportunity to learn and be exposed to many different facets of the IT landscape. Our technicians are not pigeonholed into a narrow field of support. All our technicians are expected to be able to support every service we offer. Training is encouraged as well as use of our in-house lab to further broaden their knowledge.

Job DescriptionCompany Description Store Management Our Domino's Pizza General Managers are the backbone of our business! General Managers handle all aspects of running a Domino's Pizza store, including leading their team, setting high standards for customer service and maintaining exceptional product quality standards. Opportunities! Our Management Development Program allows only our own store managers to apply for franchising opportunities - which sets us apart from our competition. For many of our General Managers, the ultimate goal is to own their own business. Only individuals who have successfully managed a Domino's Pizza store for at least a year, are eligible to apply for a franchise. Join our team and learn how business ownership may be within your grasp! If you are looking for a career path within our corporation, you could become a Trainer or a Regional Manager in our field marketplace. Great Pay! Our managers are paid a starting base hourly wage of $19.50. In addition, managers are eligible to earn bonuses and incentives based on the profitability of their stores, as well as the store's overall performance. Qualified management applicants must be at least 18 years old, Some management experience is a plus. The ability to work in a fast-paced, high volume environment and be able to handle multiple tasks at once is required. Job Description PHYSICAL REQUIREMENTS, including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking surfaces include ceramic tile "bricks" with linoleum in some food process areas. Height of work surfaces is between 36" and 48". Walking For short distances for short durations Delivery personnel must travel between the store and delivery vehicle and from the delivery vehicle to the customer's location. Sitting Paperwork is normally completed in an office at a desk or table Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72" high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas and beverages while performing "walking" and "climbing" duties. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24" - 30" and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. Stooping/Bending Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day. Forward bending is also present at the front counter and when stocking ingredients. Crouching/Squatting Performed occasionally to stock shelves and to clean low areas. Reaching Reaching is performed continuously; up, down and forward. Workers reach above 72" occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Machines, Tools, Equipment, Work Aids Team Members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel. Qualifications • Valid U.S employment authorization that allows you to work in the United States of America., • Friendly, • Works well with others., • Works well under stress of high paced environment., • Organized, • Efficient in time management., • Must work weekends, • Preferred restaurant experience., • Ability to multitask., • Flexible but must understand you must work a minimum of 5 closing nights a week, including Friday, Saturday, and Sunday, non-negotiable, • Motivational skills, • Enthusiastic, • Possess the ability to train and develop a team., • Able to make employee schedules, • Able to place stores food orders/maintain inventory., • Able to keep the store employees in proper image., • Able to respond to customer concerns., • Must be able to follow Team Sharma Domino’s Policies., • Must be able to work together as a team., • Must understand all store calls must be answered after the first ring, • Exceptional product above all. Additional Information All your information will be kept confidential according to EEO guidelines.

Perform Preventive Maintenance (PM) and Predictive Maintenance (PdM) to increase equipment reliability and up-time. Prioritize and self-schedule maintenance work around production activities to achieve both production and maintenance KPI's. Contractual Full Utilization, allows maintenance technician

Key Responsibilities Perform global preventive maintenance on freeze-drying systems Diagnose system faults and implement corrective actions Support commissioning and production/testing tasks Maintain accurate service records and documentation Provide on-call support as needed Deliver professional se

CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Screw Rotating Motors Gui

Prepare and follow up on RFIs, submittals, and change orders.

In the United States Army, the interior electrician is primarily responsible for the installation and maintenance for all of the Armys interior electrical systems. Housing and meal allowance for full-time positions. Low-cost life insurance (up to $400,000 coverage).

Hays is working with one of the top civil general contractors in the northeast who's looking for an Assistant Project Manager.They are family owned and have grown by 30% for the last several years.You would be working on heavy civil utility projects throughout Long Island.There is a high growth pote

Our client is seeking a Field Service Technician to provide on-site maintenance and repair services for conveyor systems. Prior experience with industrial equipment maintenance, particularly conveyor systems.

We have an immediate need for a.Mechanical Engineer (focusing on HVAC designs).Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff.Ranked among the nation's top A/E firms by Engineering News-Record, we provide construction management,

Construction Management company seeking an experienced Project Manager to join its rapidly growing 50-year-old company.This Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure they are compl

Hand tools normally used in construction, maintenance and landscaping. Experience in building maintenance or experience in the trades. The Maintenance Technician will report directly to the Manager of Buildings and Grounds.

Assistant Project Manager Job Summary.We are seeking a dedicated, organized, and efficient assistant project manager to join our team.In this role, you will work with the project manager to coordinate and accomplish the necessary project tasks and requirements.Candidate must have an eye for detail a

Welkin Enterprises, LLC, is a Plumbing and Mechanical construction firm specializing in heavy plumbing, fire protection, HVAC, and in-facilities water and wastewater projects.Welkin’s principals have served clients ranging from government agencies to utilities, contractors, and private firms, incl

The Shift Maintenance Supervisor provides management and direct oversight of the Finishing Shift Maintenance staff, setting demand maintenance processes that support reliability, availability, and overall equipment effectiveness in the Finishing Work Center. Drive creation, execution, and continuous

Considering making an application for this job Check all the details in this job description, and then click on Apply.We have an immediate need for a.Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff.Ranked among the nation's top A/E

The Project Manager is responsible for managing low complexity project business by placing orders, tracking shipments, and billing the customer correctly. Manage all aspects of low profile/complex projects.

Construction Management company seeking an experienced Project Manager to join its rapidly growing 50-year-old company.This Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure they are compl

Preserve general upkeep and cleanliness of the community through grounds maintenance and snow removal, if necessary. Hand tools normally used in construction, maintenance and landscaping. Experience in building maintenance or experience in the trades.

We have an immediate need for a.Mechanical Engineer (focusing on HVAC designs).Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff.Ranked among the nation's top A/E firms by Engineering News-Record, we provide construction management,

Welkin Enterprises, LLC, is a Plumbing and Mechanical construction firm specializing in heavy plumbing, fire protection, HVAC, and in-facilities water and wastewater projects.Welkin's principals have served clients ranging from government agencies to utilities, contractors, and private firms, includ

Hays is working with one of the top civil general contractors in the northeast who's looking for an Assistant Project Manager.They are family owned and have grown by 30% for the last several years.You would be working on heavy civil utility projects throughout Long Island.There is a high growth pote

Assistant Project Manager Job Summary.We are seeking a dedicated, organized, and efficient assistant project manager to join our team.In this role, you will work with the project manager to coordinate and accomplish the necessary project tasks and requirements.Candidate must have an eye for detail a

Follow up with clients to obtain necessary assets (e.

The candidate shall have an understanding of the Automation field and how the following types of projects are executed:.

We are seeking a highly organized and detail-oriented Project Manager to join our dynamic team.This role is essential to ensuring smooth project execution, from initial planning through final delivery.You'll collaborate closely with internal teams and clients to maintain timelines, ensure quality, a

Hays is working with one of the top civil general contractors in the northeast who's looking for an Assistant Project Manager.They are family owned and have grown by 30% for the last several years.You would be working on heavy civil utility projects throughout Long Island.There is a high growth pote

Lane Valente Industries is a leading international construction and facility maintenance company with offices throughout the U. Treat all customers, other trades personnel, vendors, fellow workers, etc. Know, follow and hold others accountable to the safety policy, program and training of CESG.

The Project Manager must have demonstrated corporate experience and provide support staff meeting the following requirements:.

Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. Lane Valente Industries is a leading international construction and facility maintenance company with

Project Management | Project Value Delivery.Job Description: In the role of Program Manager, you will interface with key stakeholders and apply your Project/Program management proficiency in Client Management, Build.

Assistant Project Manager Job Summary.We are seeking a dedicated, organized, and efficient assistant project manager to join our team.In this role, you will work with the project manager to coordinate and accomplish the necessary project tasks and requirements.Candidate must have an eye for detail a

Perform services, following ARS production guidelines and standards. Understand and follow safety and risk management guidelines on the job site, in the office, and while traveling.

Lane Valente Industries is a leading international construction and facility maintenance company with offices throughout the U.

Act as the sponsor's main contact person in all matters regarding our central laboratory services, following up and responding to clinical study specific inquiries from Sponsors, Physicians, CRA and CRO representatives and the ICON Site Services Department.

The duties of the position shall include, but are not limited to, the following:. Perform basic HVAC repairs and maintenance, and work with contractors. Assist in the development and implementation of preventative maintenance program, energy management system, and property management software.

We have an immediate need for a.Mechanical Engineer (focusing on HVAC designs).Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff.Ranked among the nation's top A/E firms by Engineering News-Record, we provide construction management,

No Visa Sponsorship available for this job.No third-party agencies Corp To Corp.Job description: Manage large teams in Onsite/o.