Trabajos mig welding en Harrison, New JerseyCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred., • Familiarity with computerized fleet maintenance and parts inventory systems preferred. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $35.00/Hr.

\n \n \n \n \n XPO is hiring Fleet Mechanics: Diesel, Trailer, and Lead Mechanics across multiple locations!\n \n \n Your Skills Keep Fleets Moving. We'll Help You Go Further.\n \n \n \n \n \n \n \n \n What We Offer for All Mechanics:\n \n • +$1/hour for 2nd shift\n, • +$3/hour for 3rd shift\n, • Quarterly tool allowance to grow your tool kit\n, • Full health insurance benefits on day one\n, • Life and disability insurance\n, • Earn up to 13 days PTO over your first year\n, • 9 paid company holidays\n, • 401(k) option with company match\n, • Education assistance\n \n \n \n \n \n Trailer Mechanic:\n \n, • Burnsville, MN - Des Moines, IA - Glenpool, OK - Kansas City, KS - Richland, MS\n, • Pay is $26.53 - $35.63 per hour (not including shift premium)\n \n, • Pay is depending on experience and location\n \n Requirements:\n \n, • 1 year of verifiable experience in heavy-duty maintenance and/or time in an entry-level Mechanic role\n, • Able to perform safety inspections of equipment and prepare safety documentation\n, • Basic hand tools required for heavy-duty trailer maintenance\n, • A valid driver's license\n, • Basic computer skills\n, • Availability to work a variety of shifts, including days, evenings, nights and weekends\n \n \n \n \n \n Diesel Mechanic:\n \n, • Columbus, OH - Des Moines. IA - Portland, OR - Glenpool, OK - Kansas City, KS\n, • Pay is $33.95 - $42.84 per hour (not including shift premium or ASE Certification)\n \n, • Pay is depending on experience and location\n \n Requirements:\n \n, • 2 years of experience in tractor and trailer inspection and repair -OR- a technical school degree with certification in heavy duty truck/trailer maintenance\n, • To obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire (MACS or equivalent)\n, • Basic welding skills (Oxy/Acetylene, MIG and ARC)\n, • Basic hand tools required for heavy duty trailer and tractor maintenance\n, • A valid driver's license\n, • Basic computer skills\n, • Availability to work a variety of shifts, including days, evenings, nights and weekends\n \n \n \n \n \n Lead Mechanic:\n \n, • Carlstadt, NJ - Glenpool, OK - La Salle, IL\n, • Pay is $39.57 - $43.90 per hour (not including shift premium or ASE Certification)\n \n, • Pay is depending on experience and location\n \n Requirements:\n \n, • 4 years of related work experience or military experience\n, • To obtain EPA HVAC Refrigerant Recovery and Recycling Certification within 90 days of hire\n, • Brake & Vehicle inspection qualified\n, • A valid driver's license\n, • Basic computer skills\n, • Availability to work a variety of shifts, including days, evenings, nights and weekends\n \n \n \n \n \n Specialist/Apprentice:\n \n, • Columbus, OH\n, • Pay starts at $22.85 per hour\n, • Hiring 2nd & 3rd Shift\n, • Company-provided uniforms\n Requirements:\n \n, • Desire to become a trailer mechanic\n, • Basic mechanical skills\n, • A valid driver's license\n, • Basic computer skills\n, • Availability to work a variety of shifts, including days, evenings, nights and weekends\n \n \n \n \n \n \n \n About XPO\n \n \n XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you're looking for a growth opportunity, join us at XPO. \n \n \n

Job Summary \n We are seeking a hands-on Fabrication & Building/Warehouse Lead with a diversified, multi-trade skillset. This working lead role is responsible for day-to-day fabrication in our shop and serves as the lead for our building and warehouse — keeping the facility organized, maintained, and running safely. The ideal candidate brings experience across multiple trades — carpentry, metal fabrication, and general building maintenance — reads drawings, produces accurate work, and leads by example. \n Skyline Windows is a fourth-generation family owned and operated business. We are best known for designing, manufacturing, and installing custom windows, window wall systems, and terrace doors. All our products are made to order based on our clients’ project specifications. From landmarks to new construction, high end residential to high volume commercial, we do it all! \n \n Key Responsibilities \n\n • Order Labeling & Shipping: Ensure completed orders are correctly labeled and staged for shipping.\n, • Facility Maintenance & Repairs: Perform general building maintenance and repairs, including basic electrical and plumbing work as needed.\n, • Carpentry & Woodwork: Fabricate, cut, and assemble wood components and custom pieces using table saws, chop saws, and related woodworking equipment and hand tools.\n, • Metal Work & Brake Operation: Measure, mark, cut, bend, and shape metal and other materials, including operating a brake to form capping, flashing, and trim.\n, • Blueprint Interpretation: Read and understand technical drawings, schematics, and blueprints to execute accurate fabrication.\n, • Assembly: Join and assemble components through welding, bolting, riveting, or adhesives to construct finished products.\n, • Quality Control: Inspect and test work for defects and verify compliance with specifications using precision instruments (tape measures, calipers); check the quality and accuracy of work produced by other fabricators in the shop.\n, • Equipment Maintenance: Perform routine maintenance on tools and machinery to ensure optimal functionality and safety.\n, • Safety Compliance: Adhere to OSHA guidelines and company safety protocols, including proper use of PPE.\n, • Collaboration: Work with engineers, designers, field teams, and warehouse staff to resolve challenges and improve processes.\n, • Documentation & Process Improvement: Record production data and inspection results accurately; recommend efficiency improvements in techniques and workflows.\n\n \n Qualifications & Skills \n\n • Education: High school diploma or equivalent; trade or technical training in carpentry, fabrication, or a related building trade preferred.\n, • Experience: 5+ years of hands-on experience across carpentry, fabrication, and/or building maintenance. This role requires a broad, diversified skillset across multiple trades.\n\n \n Technical Skills: \n\n • Required: Carpentry skills, including safe, proficient use of table saws, chop saws, and other woodworking and shop equipment.\n, • Required: Ability to operate a brake and general fabrication tools (saws, grinders, drills).\n, • Required: Ability to read blueprints and use measuring instruments (tape measures, calipers).\n, • Expected: Basic welding/machining skills (TIG, MIG, or ARC welding certifications a plus).\n, • Preferred: Basic electrical and plumbing experience for building maintenance and repairs.\n\n \n Soft Skills: \n\n • Leadership and ownership — able to lead the fabrication team day to day with minimal supervision.\n, • Strong attention to detail and problem-solving abilities.\n, • Effective communication and teamwork.\n, • Bilingual (English/Spanish) a plus.\n, • Time management to meet production deadlines.\n\n \n Physical Requirements: Lift up to 75 lbs.; stand for extended periods. Manual dexterity and visual acuity for precise work. \n \n Certifications: OSHA General Industry Health and Safety, forklift license, or welding certifications preferred. \n \n Work Environment \n\n • Manufacturing facility with exposure to machinery noise, varying temperatures, and industrial materials.\n, • PPE (safety glasses, gloves, steel-toe boots) required.\n\n \n Schedule & Compensation \n\n • Hours: 8:00 AM – 4:30 PM\n, • Rate: $40–$45/hr\n, • Benefits: Union\n\n

Job Description COPPER FABRICATOR APPRENTICE Are you mechanically-inclined, enjoy working hard, and looking for job security for life? This chance to become a Master Copper Fabricator and revive a lost art is for you! OVERVIEW Job Title: Copper Fabricator ApprenticeLocation: Keyport, NJSchedule: Monday-Friday, Day Shift. No weekends. 8-Hour Shifts plus overtime opportunitiesSalary Range: $28-$30/hour. Total Compensation Package: Paid on-the-job training, a significant pay increase upon advancing to Master Fabricator, employer-funded retirement plan, year-end bonus, health and dental insurance, sick days, and PTORequired Experience: Hands-on mechanical experience required. No copper fabrication experience necessary. We are looking for someone who is good with their hands, enjoys figuring out how things work, and takes pride in working hard to get the job done right. RESPONSIBILITIES • Learn to read and interpret mechanical drawings and blueprints, • Cut, bend, and form copper tubing to precise dimensions using basic shop math and geometry, • Braze copper joints using an oxy-acetylene torch, • Assemble precision induction heating coils and components, • Follow strict quality control and inspection procedures, • Cross-train and assist with other builds on the shop floor as needed, • Maintain a safe, clean, and organized work area REQUIRED QUALIFICATIONS • Strong mechanical aptitude: you're good with your hands and enjoy troubleshooting, building, and fixing things, • Excellent attention to detail and a commitment to quality work, • Willingness to learn and take direction from experienced craftsmen, • Dependable attendance and a strong work ethic, • Comfortable with basic shop math (measurements, fractions, simple geometry), • Valid driver's license, • Lawful permanent resident or U.S. citizen, • Ability to pass a background check and drug screen PREFERRED QUALIFICATIONS These are nice to have, but not all necessary. Please still apply even if you don’t check all of these boxes. • HVAC or refrigeration experience, • Automotive or diesel mechanic experience, • Military mechanical or maintenance background (e.g., tracked or wheeled vehicle mechanic, aircraft maintenance), • Brazing, soldering, or fabrication experience. MIG/TIG is a plus, but this role is primarily brazing, not welding., • Blueprint reading, • Mechanical assembly or manual machine shop experience ABOUT THIS OPPORTUNITY: A family-owned manufacturer of induction heating systems is looking for its next Copper Fabricator. The company builds equipment used across aerospace and industrial manufacturing, and the copper coils at the heart of these systems are built by hand. The skill is specialized enough that it isn't taught in trade school. It's learned at the bench from experienced craftsmen, and that's exactly what this apprenticeship offers. You'll train alongside a master fabricator to cut, form, and braze copper tubing into precision induction coils. Most apprentices build these skills within 6–12 months, with a significant pay increase when they advance to Master. This is a hands-on, shop-floor role focused on the craft: growth here means mastering the trade and earning more for it. The team is small and close-knit, and people stay for the long haul; most team members have retired from here. Benefits Paid on-the-job training, a significant pay increase upon advancing to Master Fabricator, employer-funded retirement plan, year-end bonus, health and dental insurance, sick days, and PTO Human-First Hiring. When you apply, your resume will always be reviewed by our team of real recruiters — not an AI screening bot. MILITARY VETERANS & MILITARY SPOUSES — YOU BELONG HERE Blue United Sourcing is a Veteran-Owned Small Business, and we actively recruit from the military community. You are strongly encouraged to apply. Don't fit the criteria for this role? Join our Talent Network to be matched with future job openings that fit your experience and career goals. Blue United Sourcing is proud to be a Veteran-Owned Small Business. Learn more: www.blueunitedsourcing.com Follow us on LinkedIn.

Job Description Construction Superintendent Energy Fencing Inc. is New York’s premier fencing company, proudly operating under the motto “With energy, anything is possible.” Our commitment to excellence, reliability, and customer satisfaction drives us to deliver top-quality fencing installations, gates, and custom ironworks. We are seeking an experienced Fabrication Superintendent with a strong background in welding, metal fabrication, and miscellaneous metals construction. This leadership role is responsible for overseeing shop fabrication operations, coordinating welders, fabricators, and installation crews, managing production schedules, ensuring material readiness, and maintaining the highest standards of quality and safety. The ideal candidate is a hands on leader with extensive knowledge of metal fabrication processes, blueprint reading, welding techniques, and field installation requirements. They must be a proactive problem solver with exceptional leadership, organizational, and communication skills capable of driving projects from fabrication through successful installation. Key Responsibilities • Project Supervision: Oversee the fabrication and installation of custom welded metal assemblies, ornamental iron work, aluminum gates, steel gates, railings, bollards, window guards, security barriers, custom brackets, support frames, and miscellaneous metal fabrications. Ensure all work is performed in accordance with approved shop drawings, project specifications, welding procedures, quality standards, and contract requirements while maintaining productivity, craftsmanship, and schedule adherence throughout the fabrication and installation process., • Fabrication & Installation Management: Coordinate shop fabrication activities with field installation operations to ensure material readiness, proper sequencing, and adherence to project schedules., • Crew Management: Lead, schedule, and supervise ironworkers, welders, laborers, installers, and subcontractors, ensuring productivity, workmanship quality, and accountability., • Safety Compliance: Enforce OSHA regulations, site-specific safety plans, hot work requirements, rigging procedures, fall protection standards, and company safety policies throughout fabrication and installation activities., • Scheduling & Logistics Coordination: Manage project schedules, material procurement, fabrication lead times, equipment needs, trucking logistics, crane operations, and workforce allocation to maintain project milestones., • Quality Control: Conduct regular inspections of fabricated and installed work to verify dimensional accuracy, weld quality, finishes, tolerances, and compliance with approved shop drawings and industry standards., • Client & Project Team Communication: Serve as the primary field liaison between clients, general contractors, project managers, engineers, architects, fabricators, and installation crews regarding project progress, coordination issues, and schedule updates., • Field Problem Resolution: Identify and resolve fabrication discrepancies, field conflicts, unforeseen site conditions, fit-up issues, and installation challenges while minimizing project delays and additional costs., • Documentation & Reporting: Maintain daily reports, fabrication tracking logs, installation progress reports, safety documentation, change order records, RFIs, punch list items, and project closeout documentation., • Material & Inventory Oversight: Monitor steel, aluminum, stainless steel, hardware, and specialty material inventories to ensure timely procurement, proper storage, and uninterrupted production and installation operations.Qualifications, • Proven experience as a Fabrication Superintendent, Shop Superintendent, Production Manager, or similar leadership role within a welding, metal fabrication, or miscellaneous metals environment (required)., • Minimum 5 years of experience supervising fabrication shop operations, welding activities, and field installation crews., • Extensive knowledge of welding processes, metal fabrication techniques, shop production workflows, and field installation practices., • Strong understanding of ornamental iron work, aluminum and steel gates, railings, bollards, window guards, security barriers, custom metal fabrications, and miscellaneous metals construction., • Ability to read and interpret shop drawings, fabrication details, architectural plans, engineering drawings, welding symbols, and project specifications., • Demonstrated experience managing welders, fabricators, painters, installers, and subcontractors while maintaining production schedules and quality standards., • Welding certification from the American Welding Society (AWS) or equivalent welding qualification preferred. Candidates with extensive supervisory experience may be considered in lieu of formal certification., • Strong understanding of welding procedures, weld quality standards, fabrication tolerances, fit-up requirements, and quality control processes., • Experience with MIG, TIG, Stick (SMAW), and Flux Core (FCAW) welding processes., • Knowledge of fabrication equipment including ironworkers, press brakes, shears, band saws, drill presses, welding machines, forklifts, and overhead lifting equipment., • Ability to coordinate material procurement, fabrication schedules, deliveries, and installation sequencing to meet project deadlines., • Strong leadership, communication, problem-solving, and organizational skills with the ability to manage multiple projects and production priorities simultaneously., • Ability to train, mentor, and develop fabrication personnel while fostering a culture of accountability, safety, and craftsmanship., • Experience conducting quality inspections and ensuring fabricated products meet approved shop drawings, project specifications, and company standards., • Ability to prepare and maintain production reports, fabrication schedules, material tracking logs, quality control documentation, and safety records., • Valid driver's license and reliable transportation., • English proficiency (required)., • Must be located in NYC or within 25 miles of Brooklyn, NY 11207., • Ability to commute to Brooklyn, NY 11207 (required) and travel to fabrication facilities, supplier locations, and project sites as needed., • Ability to lift up to 50 pounds and work in both shop and field environments when required., • Authorized to work in the United States.Work Environment, • Combination of field supervision and office coordination., • Fast-paced environment overseeing multiple active projects., • Regular travel to job sites throughout the New York metropolitan area., • Compensation & Benefits, • Salary: Starting at $57,600 yearly starting salary - $67,200 annually (commensurate with experience), • Compensation Package: Bonus opportunities, performance bonus, yearly bonusBenefits:, • 401(k), • Paid time off (10 PTO days), • Professional development and training opportunities, • Schedule, • 8-hour shifts, • Day shift, Monday–Friday Energy Fencing Inc. is an equal opportunity employer. We encourage applicants from all backgrounds to apply.

Job Description Wrought Iron Fabricator Job Type: Full-time Location: Brooklyn, NY 11207 (in person) Position: Wrought Iron Fabricator Energy Fencing Inc. is New York’s premier fencing company, proudly operating under the motto “With energy, anything is possible.” Our commitment to excellence, reliability, and customer satisfaction drives us to deliver top-quality fencing installations, gates, and custom ironworks. We are seeking an experienced Wrought Iron Fabricator to join our growing team. The ideal candidate will possess strong welding and metal fabrication skills, experience working with ornamental iron and miscellaneous metals, and a commitment to producing exceptional craftsmanship. This role is responsible for fabricating custom gates, fences, railings, window guards, bollards, security barriers, and specialty metalwork for commercial, municipal, industrial, and residential projects. The successful candidate must be able to read and interpret shop drawings, perform accurate layout and fit-up work, operate fabrication equipment safely, and maintain high standards of quality throughout the fabrication process. This position requires a detail-oriented professional who takes pride in producing finished products that meet project specifications, customer expectations, and Energy Fencing's quality standards. Key Responsibilities Metal Fabrication: Fabricate custom wrought iron fences, gates, railings, window guards, security barriers, bollards, decorative ironwork, and other miscellaneous metal products in accordance with approved shop drawings, project specifications, and company standards. • Layout & Fit-Up: Measure, mark, cut, notch, cope, drill, and assemble metal components accurately to ensure proper fit, alignment, and dimensional compliance prior to welding and finishing., • Welding & Assembly: Perform MIG, TIG, Stick (SMAW), and Flux Core (FCAW) welding on steel, aluminum, and miscellaneous metal components as required. Produce clean, structurally sound welds that meet quality and appearance standards., • Blueprint & Drawing Interpretation: Read and interpret shop drawings, fabrication details, blueprints, sketches, material schedules, and specifications to accurately fabricate products according to design requirements., • Equipment Operation: Safely operate fabrication equipment including welding machines, ironworkers, band saws, chop saws, drill presses, grinders, hydraulic presses, forklifts, and other shop tools necessary to complete fabrication activities., • Metal Finishing: Grind, sand, polish, straighten, and prepare fabricated assemblies for galvanizing, powder coating, painting, or final installation. Ensure all finished products meet company quality and aesthetic standards., • Quality Control: Inspect fabricated products throughout the manufacturing process to verify dimensions, weld quality, material accuracy, fit-up, functionality, and overall workmanship. Identify and correct deficiencies before products leave the shop., • Material Handling & Inventory: Assist with receiving, organizing, storing, and tracking raw materials, hardware, and fabricated products. Verify material quantities and report shortages, defects, or discrepancies to management., • Installation Support: Coordinate with field installation teams to ensure fabricated products are delivered complete, accurate, and ready for installation. Assist with field modifications and troubleshooting when required., • Equipment Maintenance: Perform routine maintenance and care of welding equipment, fabrication machinery, hand tools, and shop equipment. Report repair needs and maintain equipment in safe working condition., • Shop Organization: Maintain a clean, organized, and efficient work environment. Properly store materials, tools, and finished products while ensuring walkways and work areas remain safe and free of hazards., • Safety Compliance: Follow OSHA regulations, company safety policies, hot work procedures, personal protective equipment (PPE) requirements, and safe material handling practices at all times. Promote a culture of safety and accountability throughout the fabrication shop., • Team Collaboration: Work closely with shop supervisors, project managers, estimators, and installation crews to ensure fabrication schedules, production goals, and project deadlines are achieved. Qualifications • Minimum 3 years of experience in wrought iron fabrication, miscellaneous metals fabrication, welding, or a related metalworking trade (required)., • Proven experience fabricating ornamental iron fences, gates, railings, window guards, security barriers, bollards, stair systems, and custom metal products., • Proficiency in MIG, TIG, Stick (SMAW), and Flux Core (FCAW) welding processes., • Ability to read and interpret shop drawings, fabrication details, blueprints, material schedules, and project specifications., • Strong knowledge of metal fabrication techniques including layout, measuring, cutting, drilling, coping, fitting, assembly, grinding, and finishing., • Experience operating fabrication equipment including welding machines, ironworkers, band saws, drill presses, grinders, chop saws, hydraulic equipment, and other shop tools., • Ability to accurately measure, fabricate, and assemble components while maintaining tight tolerances and high quality standards., • Strong understanding of welding symbols, fabrication standards, material types, and fabrication best practices., • Experience working with steel, aluminum, stainless steel, and ornamental iron products preferred., • Experience fabricating custom gates, automated gate systems, railings, fencing systems, and miscellaneous metal fabrications preferred., • Ability to perform quality control inspections and identify fabrication or welding deficiencies before products leave the shop., • Strong attention to detail and commitment to craftsmanship, quality, and productivity., • Ability to work independently and as part of a fabrication team in a fast paced production environment., • Working knowledge of OSHA regulations, welding safety requirements, and proper use of personal protective equipment (PPE)., • Forklift certification or experience operating material handling equipment preferred., • AWS Welding Certification preferred but not required., • Ability to lift and move materials weighing up to 75 pounds and perform physically demanding fabrication work., • English proficiency (required)., • Must be located in NYC or within 25 miles of Brooklyn, NY 11207., • Ability to commute to Brooklyn, NY 11207 (required)., • Authorized to work in the United States. Work Environment • Shop-based fabrication environment., • Occasional field measurements and installation support as needed., • Fast-paced production environment with multiple ongoing projects., • Compensation & Benefits, • Salary: $25–$30 per hour (commensurate with experience), • Compensation Package: Overtime opportunities, performance bonus, yearly bonusBenefits:, • 401(k), • Paid time off (10 PTO days), • Professional development opportunities, • Schedule, • 8-hour shifts, • Day shift, Monday–FridayEnergy Fencing Inc. is an equal opportunity employer. We encourage applicants from all backgrounds to apply.

Job Description Job Summary We are seeking an experienced Welder or Welder-Mechanic with at least 5 years of hands-on welding and fabrication experience to join our team. The ideal candidate will be skilled in welding, metal fabrication, trailer and truck body repairs, and general repair work. Candidates with mechanical experience are highly preferred, as this role may also assist with preventive maintenance, inspections, and general fleet repairs. This position offers an opportunity to work on a variety of commercial trailers, straight trucks, liftgates, and tractors in a fast-paced repair environment. What We Offer • Competitive pay $35- $40 per hour, • Medical, Vision, Dental, Life Insurance, • 401k with employer contribution, • Vacation, Holidays and Sick days, • Stable full-time employment, • Opportunity for overtime, • Variety of challenging repair and fabrication work, • Growth opportunities for skilled technicians and mechanics Schedule: Sunday to Thursday 9pm - 5am Required Welding & Fabrication Experience • Minimum 5+ years of welding experience, • MIG (wire) welding, • TIG and stick welding, • Aluminum welding, • Metal fabrication and custom repairs, • Cutting, grinding, and finishing metal components, • Torch cutting and metal shaping, • Reading measurements and fabricating accurately from specifications, • Strong problem-solving and fabrication skills, • Body Repair Experience, • Preparation and painting of repaired components, • Body filler (Bondo) application and repair, • Repairing damaged body panels and structural components, • Ability to restore equipment to safe operating condition Primary Responsibilities • Perform trailer body repairs including:, • Sidewalls, • Floors, • Roofs, • Corner rails, • Top and bottom rails, • Floor beams and cross members, • Side, freezer, and liftgate steps, • Repair and replace trailer landing legs and associated components, • Repair straight truck bodies and structural components, • Diagnose and repair hydraulic liftgates (Maxon, Palfinger, Waltco, and others), • Fabricate custom parts, brackets, hooks, and components as needed, • Repair and weld rear axle/banjo housings, • Replace and paint tractor and truck hoods, • Replace and paint bumpers on tractors and straight trucks, • Maintain a clean and safe work environment, • Complete work efficiently while meeting quality standards Preferred Mechanical Experience • Candidates with mechanical experience will receive strong consideration and higher compensation. Additional responsibilities may include:, • Preventive Maintenance (PM) services, • DVIR (Driver Vehicle Inspection Report) repairs, • General trailer and truck maintenance, • Assisting with fleet repair operations as needed Qualifications • 5+ years of welding and fabrication experience, • Experience working on commercial trucks and trailers preferred, • Ability to safely operate welding, cutting, grinding, and fabrication equipment, • Ability to read measuring tools and perform precise fabrication work, • Strong attention to detail and workmanship, • Ability to lift heavy materials and work in a shop environment, • Valid driver's license preferred, • Mechanical repair experience is a plus If you're a skilled welder who takes pride in quality craftsmanship, or a well-rounded welder/mechanic looking for a long-term opportunity, we'd love to hear from you. Apply today!

Job Description Job Summary Seeking an experienced Welder to join our plumbing and mechanical team in NYC. The ideal candidate will have hands-on experience with pipe welding, fabrication, and installation of commercial plumbing, heating, and HVAC piping systems. We are looking for someone who can work independently, read blueprints, and produce high-quality welds while following safety standards. Key Responsibilities • Perform welding on commercial plumbing, heating, and HVAC piping systems., • Weld carbon steel and stainless steel piping using appropriate welding techniques., • Perform SMAW (Stick), GTAW (TIG), and MIG welding as required., • Cut, fit, assemble, and fabricate piping and metal components., • Read and interpret blueprints, drawings, and welding specifications., • Install and repair welded piping, fittings, and mechanical equipment connections., • Inspect completed welds for quality, strength, and defects., • Troubleshoot and repair damaged piping and welded connections., • Operate welding equipment, grinders, cutting torches, and fabrication tools., • Follow OSHA regulations, fire safety procedures, and NYC job site requirements., • Work with plumbing and HVAC mechanics on commercial projects., • Maintain a clean and safe work environment. Qualifications • Minimum 3–5 years of professional welding experience, preferably in commercial plumbing or HVAC., • Strong experience with pipe welding and fabrication., • Proficiency in Stick (SMAW) welding; TIG (GTAW) experience preferred., • Ability to weld various pipe sizes and materials., • Experience reading blueprints and mechanical drawings., • Knowledge of welding safety and proper equipment handling., • Ability to work independently and as part of a team., • OSHA 30 certification preferred., • FDNY F-60 and G-60 certifications preferred., • Valid driver's license preferred. Preferred Experience • Commercial and high-rise building mechanical systems., • Boiler rooms, pump rooms, and mechanical piping installations., • Welding chilled water, heating, and other mechanical piping systems., • Pipe fitting, layout, and fabrication., • AWS welding certifications or applicable NYC welding qualifications. What We Offer • Competitive pay based on experience., • Company-paid employee health, dental, and vision insurance after 3 months., • 401(k) with company match after 6 months., • Paid holidays based on eligibility., • Paid sick time and vacation benefits. Salary- $28-$40.00

Job Description COPPER FABRICATOR APPRENTICE Are you mechanically-inclined, enjoy working hard, and looking for job security for life? This chance to become a Master Copper Fabricator and revive a lost art is for you! OVERVIEW Job Title: Copper Fabricator ApprenticeLocation: Keyport, NJSchedule: Monday-Friday, Day Shift. No weekends. 8-Hour Shifts plus overtime opportunitiesSalary Range: $28-$30/hour. Total Compensation Package: Paid on-the-job training, a significant pay increase upon advancing to Master Fabricator, employer-funded retirement plan, year-end bonus, health and dental insurance, sick days, and PTORequired Experience: Hands-on mechanical experience required. No copper fabrication experience necessary. We are looking for someone who is good with their hands, enjoys figuring out how things work, and takes pride in working hard to get the job done right. RESPONSIBILITIES • Learn to read and interpret mechanical drawings and blueprints, • Cut, bend, and form copper tubing to precise dimensions using basic shop math and geometry, • Braze copper joints using an oxy-acetylene torch, • Assemble precision induction heating coils and components, • Follow strict quality control and inspection procedures, • Cross-train and assist with other builds on the shop floor as needed, • Maintain a safe, clean, and organized work area REQUIRED QUALIFICATIONS • Strong mechanical aptitude: you're good with your hands and enjoy troubleshooting, building, and fixing things, • Excellent attention to detail and a commitment to quality work, • Willingness to learn and take direction from experienced craftsmen, • Dependable attendance and a strong work ethic, • Comfortable with basic shop math (measurements, fractions, simple geometry), • Valid driver's license, • Lawful permanent resident or U.S. citizen, • Ability to pass a background check and drug screen PREFERRED QUALIFICATIONS These are nice to have, but not all necessary. Please still apply even if you don’t check all of these boxes. • HVAC or refrigeration experience, • Automotive or diesel mechanic experience, • Military mechanical or maintenance background (e.g., tracked or wheeled vehicle mechanic, aircraft maintenance), • Brazing, soldering, or fabrication experience. MIG/TIG is a plus, but this role is primarily brazing, not welding., • Blueprint reading, • Mechanical assembly or manual machine shop experience ABOUT THIS OPPORTUNITY: A family-owned manufacturer of induction heating systems is looking for its next Copper Fabricator. The company builds equipment used across aerospace and industrial manufacturing, and the copper coils at the heart of these systems are built by hand. The skill is specialized enough that it isn't taught in trade school. It's learned at the bench from experienced craftsmen, and that's exactly what this apprenticeship offers. You'll train alongside a master fabricator to cut, form, and braze copper tubing into precision induction coils. Most apprentices build these skills within 6–12 months, with a significant pay increase when they advance to Master. This is a hands-on, shop-floor role focused on the craft: growth here means mastering the trade and earning more for it. The team is small and close-knit, and people stay for the long haul; most team members have retired from here. Benefits Paid on-the-job training, a significant pay increase upon advancing to Master Fabricator, employer-funded retirement plan, year-end bonus, health and dental insurance, sick days, and PTO Human-First Hiring. When you apply, your resume will always be reviewed by our team of real recruiters — not an AI screening bot. MILITARY VETERANS & MILITARY SPOUSES — YOU BELONG HERE Blue United Sourcing is a Veteran-Owned Small Business, and we actively recruit from the military community. You are strongly encouraged to apply. Don't fit the criteria for this role? Join our Talent Network to be matched with future job openings that fit your experience and career goals. Blue United Sourcing is proud to be a Veteran-Owned Small Business. Learn more: www.blueunitedsourcing.com Follow us on LinkedIn.

Job Description Seeking entry level welder to learn and grow. Reports to: Welding supervisor & Manager Responsibilities: cleaning, cutting, brushing, grinding, tacking, fitting, welding, using MIG & Stick Minimum Educational Qualifications High school Diploma /GED Minimum Previous Experience 1 year experience in shop setting

Overview: Shift: Monday-Friday 7:00 AM - 4:30 PM Pay Rate: $28.00-$32.00 per hour Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The A Welder / Fabricator is a senior-level technician responsible for high-quality welding, fabrication, and structural rebuilding of steel containers and compactors. This role requires advanced skills in MIG and stick welding and custom fabrication. The A Welder works independently on complex repair tasks and supports the training and development of entry-level team members. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform advanced MIG welding, stick welding and metal fabrication on a variety of container types and compactor components., • Rebuild or replace structural frames, bottoms, lids, caster brackets, and mechanical parts using custom-cut steel., • Interpret repair orders and/or sketches to execute precise rebuilds or modifications., • Use cutting torches, plasma cutters, grinders, and bending tools to shape and prepare materials., • Lead fabrication of specialized equipment or container configurations as needed for customer orders., • Perform quality control checks to ensure all welds meet company standards., • Mentor and train junior welders and assist with onboarding of new hires., • Maintain clean and organized welding area and perform basic preventative maintenance on shop tools., • Track parts used and time spent on custom or complex builds for cost analysis., • Collaborate with supervisors Requirements and Qualifications::, • Minimum 3–5 years MIG welding, stick welding and fabrication experience in industrial or structural repair settings., • Proven ability to perform precise welds in various positions and on worn or contaminated metal., • Advanced skills using fabrication tools including shears, brakes, torches, and weld jigs., • Self-motivated and capable of leading complex projects with minimal supervision., • Strong safety awareness and adherence to PPE and shop protocols., • Ability to lift heavy materials, work outdoors in all weather conditions, and operate yard equipment as needed. Work Environment This role involves working in a combination of indoor shop and outdoor yard environments. Frequent exposure to welding heat, welding fumes, grinding dust, metal shavings, and heavy lifting is expected. Welding hood, gloves, respirator (when applicable), safety glasses, steel-toe boots, and hearing protection are required daily. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $28.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Lummus Ag Solutions in Georgia seeks a skilled MIG Welder to fit, fabricate, and weld metal components and assemblies. Qualifications include 2–6 years of welding experience and proficiency in MIG welding, with ability to read blueprints and use measuring tools.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom.We are professionals in Industrial Maintenance and we make factories run better.Principal Duties/Responsibilities:.Performs expert level break-fix & preventative maintenance.This includes but is

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom.We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido.Somos profesionales

Mold Maintenance Technician / Moldmaker Apprentice.Are you mechanically minded, enjoy working with your hands, and like figuring out how things work? Looking to build a long-term career in manufacturing and precision moldmaking?.PTI Tech is looking for a dependable, detail-oriented Mold Maintenance

Overnight Maintenance Technician | Commercial Office, NYC | $34-$36 per hour.Hays Facilities Management are partnered with a leading building owner to hire an Overnight Maintenance Technician.The job duties of the Overnight Maintenance Tech will include, among others:.Oversight of maintenance relate

Maintenance Technician (1st Shift).We are seeking a skilled and detail-oriented Maintenance Technician / Controls Specialist to support the ongoing reliability, performance, and efficiency of our manufacturing operations.This role is responsible for maintaining plant equipment, troubleshooting elect

Machine OperatorElizabeth, NJCompensation IncludesStarting Pay Rate of $20.OverviewResponsible for the safe operation of various types of bag machines in order to produce high quality bags.These may include, but are not limited to, shopping, merchandise, and grocery and sack machines.Responsibilitie

Machine OperatorElizabeth, NJCompensation IncludesStarting Pay Rate of $20.OverviewResponsible for the safe operation of various types of bag machines in order to produce high quality bags.These may include, but are not limited to, shopping, merchandise, and grocery and sack machines.Responsibilitie

The CNC Mill Operator - Machinist at Thaler Defense Systems is a technical role responsible for the precision machining of high-performance aerospace and defense components.Working under the guidance of the Production Supervisor, this individual ensures that mission-critical parts meet exact toleran

Our client is seeking a Mechanical Assembler to support the assembly of mechanical components, subassemblies, and finished products within a manufacturing environment.This position requires strong mechanical aptitude, attention to detail, and the ability to follow engineering drawings, work instruct

A leading manufacturing organization is seeking a.This role is ideal for a skilled maintenance professional who enjoys troubleshooting, solving mechanical and electrical problems, and working in a fast-paced manufacturing environment.The Reliability Maintenance Technician will perform preventive and

ECO3 is a leading global supplier of prepress and printing solutions to the graphic arts industry.We help printers improve efficiency, reduce waste, and minimize resource consumption through innovative products and solutions.We are currently looking for a motivated and reliable.Converting team in So

Aerotek - - Responsibilities: Operate and monitor cable manufacturing equipment; Ensure quality of cable output; Set up machines according to order specifications and input details into a computer; Troubleshoot equipment during operations and breakdowns; Refill the material coating the cables as ne

Aerotek - - Responsibilities: Assemble electrical and mechanical components from drawings; Read electrical schematics and mechanical drawings; Use hand and power tools to build; Follow production schedules and quality standards; Troubleshoot basic assembly issues and communicate with shop leads.

Owens Corning - - Responsibilities: Support safety initiatives and TPM processes to maintain zero losses and zero defects; Perform laminator quality checks and Layered Process Audits; Monitor and report material quality issues and off-spec products; Assist in machine maintenance, housekeeping, and

Aerotek - JobID: JP-005851603 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

Aerotek - - Responsibilities: Assemble products using electrical schematics, drawings, and fabrication prints; Perform electrical wiring and mechanical assembly; Support final product integration and testing; Read and interpret blueprints, schematics, and assembly drawings; Follow production schedu

Structural Engineer / Great Place To Work!.This Jobot Job is hosted by: Alex Console.Are you a fit? Easy Apply now by clicking the "Apply" button.Salary: $90,000 - $110,000 per year.We are committed to providing a positive and supportive work environment that promotes both personal and professional

Aerotek - - Responsibilities: Wire electrical schematics and mechanical drawings into assemblies; Assemble electrical and mechanical components; Read electrical schematics and mechanical drawings; Use hand and power tools for builds; Maintain clean and safe work area.

If you're looking for a special place to build or grow your career, you've found it.Whether you're an experienced professional, a recent college graduate or somewhere in between, IDEX is a place where you can apply your existing skills and learn new ones in an environment where you can make an impac

Aerotek - - Responsibilities: Crimp, strip, and connect wires and cables; Utilize hand tools and perform bench work; Follow diagrams or schematics; Minor soldering.

Aerotek - - Responsibilities: Assemble and wire low voltage panels according to specifications; Build and integrate electrical switchboards; Read and interpret blueprints and electrical schematics; Ensure compliance with UL assembly standards and electrical codes.

PrideStaff - - Responsibilities: Fabricate rugs in the shop according to STARK standards; Log completed tasks with accurate timestamps; Use STARK-provided tools and machinery safely; Participate in daily meetings, collaborate with fabrication and warehouse teams; Occasionally assist with deliveries