Molding jobs in East Orange, New JerseyCreate job alerts

Job DescriptionDescription: The Maintenance Technician is responsible for the day-to-day maintenance, repair, and overall physical care of apartment buildings/complexes. This hands on role supports the Building Superintendent and property management team to ensure a well maintained, safe, and high quality living environment for all residents. The ideal candidate is a reliable professional with strong technical skills, a customer service mindset, and residential or multi-unit properties. Key Responsibilities General Maintenance & Repairs Complete daily service work orders with professionalism and attention to detail. • Prepare market ready apartments, including cleaning, repairs, painting, and installations., • Perform electrical repairs such as lighting fixtures, switches, outlets, appliances, and related equipment., • Conduct plumbing repairs including clearing stoppages, repairing leaks, replacing fittings and valves, and basic pipe work., • Perform carpentry tasks including fitting doors, installing molding, floor repairs, framing, sanding, and refinishing., • Complete sheetrock repair, spackling, priming, and painting as needed., • Assist with flooring repairs or replacements. Building Operations & Property Care • Maintain all common areas, including lobbies, hallways, laundry rooms, elevators, and amenity spaces in accordance with company standards., • Conduct routine cleaning and custodial tasks for resident turnover., • Maintain building grounds, walkways, and exterior areas., • Perform repairs involving concrete, roofing, masonry, and fencing as necessary., • Participate in all ongoing building improvement and capital projects., • Support HVAC controls and ensure familiarity with building mechanical systems. Emergency Response & On Call Rotation • Participate in the on call rotation for nights, weekends, and holidays., • Respond promptly to emergency requests including floods, power outages, leaks, and safety risks., • Demonstrate full knowledge of emergency building shutoffs (water, electrical, gas). Inspections & Compliance • Conduct annual and periodic apartment inspections., • Identify safety hazards and report or resolve issues promptly., • Assist with compliance efforts and preventative maintenance schedules. Resident & Team Communication • Professionally interact with residents, providing high quality service and clear communication., • Deliver notices to residents and support the Property Manager with building updates., • Work collaboratively with the maintenance and management team to ensure exceptional property operations. Seasonal Duties • Participate in snow and ice removal efforts, including shoveling, salting, and maintaining walkways., • Assist with seasonal building preparation tasks (HVAC, landscaping, winterization, etc.). Requirements: Qualifications • High School Diploma or GED required., • Minimum of 1 year of maintenance experience, preferably in apartment communities or related residential environments., • Valid driver’s license; reliable transportation to assigned property., • Personal set of basic tools required., • Strong communication and customer service skills., • Ability to work independently and as part of a team. Physical Requirements • Ability to lift 70–75 lbs. unassisted., • Ability to climb ladders and access rooftops (25–30 ft)., • Ability to work in confined spaces or crouched positions for extended periods., • Comfortable working overhead with power tools, hand tools, and painting equipment., • Ability to shovel snow or perform outdoor work for extended periods. Wages: $23 - $24 per hour Benefits: Medical, Dental, Vision; 401k, Paid Time Off, Paid Holidays, Life Insurance

Job Description Pay: $25.00–$45.00 per hour, based on experience Schedule: All shifts available, with the greatest need on 3rd shift Hours: Minimum 48 hours per week Job Type: Full-time Overtime: Required as needed Work Location: In person Position Summary Union Beverage Packers, LLC is looking for skilled and dependable Industrial Maintenance Mechanics to support our beverage manufacturing operation. We are hiring for all shifts, but we currently have a greater need for qualified candidates on 3rd shift. This position is responsible for troubleshooting, repairing, adjusting, and maintaining production equipment, plant machinery, and related systems. Candidates with experience working on Sidel blow molding equipment are strongly encouraged to apply. The mechanic will work closely with Maintenance, Production, Quality Control, Sanitation, contractors, and equipment vendors to keep production running safely and efficiently. Key Responsibilities The Industrial Maintenance Mechanic will: • Perform scheduled and unscheduled maintenance on production equipment and plant machinery., • Troubleshoot mechanical, pneumatic, hydraulic, electrical, plumbing, HVAC, and refrigeration issues., • Complete preventive maintenance, corrective maintenance, and equipment repairs., • Diagnose equipment failures and make repairs to reduce downtime., • Assist with equipment installation, modification, start-up, and production changeovers., • Read and understand mechanical drawings, schematics, machine manuals, and technical documents., • Inspect equipment daily and report major problems to Maintenance leadership., • Support blow molders, fillers, conveyors, palletizers, packaging equipment, and other production systems., • Enter work orders and maintain accurate repair and maintenance records., • Support production during equipment breakdowns and high-pressure situations., • Follow all safety, GMP, food safety, quality, sanitation, and company procedures., • Keep the work area clean, safe, and organized. Sidel Blow Molding Responsibilities Candidates with Sidel experience may also be responsible for: • Operating, monitoring, adjusting, and troubleshooting Sidel blow molding equipment., • Completing machine changeovers, production start-ups, adjustments, and major repairs., • Maintaining Sidel systems such as SBO, Matrix, Universal, Series 2, or similar equipment., • Troubleshooting mechanical, pneumatic, hydraulic, and basic electrical problems., • Working with Quality Control to make sure bottles meet company standards., • Supporting bottle quality, process improvements, and downtime reduction., • Cleaning, sanitizing, and maintaining blow molding and related production equipment. Required Qualifications • High school diploma or equivalent., • Industrial maintenance, mechanical, manufacturing equipment, or related technical experience., • Strong troubleshooting and problem-solving skills., • Ability to work independently and respond quickly to equipment problems., • Ability to work at least 48 hours per week., • Ability to work overtime, weekends, and holidays when required., • Ability to work safely around production equipment and moving machinery., • Ability to stand, walk, bend, kneel, climb, push, and pull during the shift., • Ability to lift at least 50 pounds., • Ability to work in a warm, loud, wet, and fast-paced manufacturing environment., • Ability to wear all required personal protective equipment. Preferred Experience The following experience is preferred but not required: • Hands-on experience maintaining or repairing Sidel blow molding equipment., • Beverage, bottled water, soft drink, food manufacturing, plastics, PET packaging, or bottling experience., • Experience with fillers, conveyors, palletizers, blow molders, and packaging equipment., • Electrical, welding, plumbing, HVAC, refrigeration, or equipment installation experience., • Experience with PLCs and automated production systems., • Experience performing major machine repairs or equipment overhauls., • Previous experience as a Sidel Field Service Engineer or Service Technician., • Forklift or equipment certification., • Basic computer skills for entering work orders and maintenance records. Physical Requirements • Lift up to 50 pounds regularly and heavier items with proper assistance or equipment., • Stand and walk for long periods., • Bend, reach, kneel, climb, push, and pull throughout the shift., • Work around moving equipment, wet areas, noise, heat, and production activity., • Follow all required safety procedures and PPE requirements. Benefits Union Beverage Packers offers: • Competitive pay from $25.00 to $40.00 per hour, • Overtime opportunities, • Medical insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid time off, • Paid holidays, • 401(k), • 401(k) matching, • Training and growth opportunities Benefits may be subject to eligibility requirements. Candidate Screening Questions • Which shift are you available to work?, • Are you able to work at least 48 hours per week and overtime when required?, • How many years of industrial maintenance experience do you have?, • What production or manufacturing equipment have you repaired?, • Do you have beverage, bottling, food manufacturing, plastics, or packaging experience?, • Have you worked on Sidel blow molding equipment?, • Which Sidel models have you worked on?, • Can you troubleshoot mechanical, pneumatic, hydraulic, and basic electrical problems?, • What major machine repairs or equipment overhauls have you completed?, • Are you comfortable working in a fast-paced beverage manufacturing environment? Equal Opportunity Employer Union Beverage Packers, LLC is an Equal Opportunity Employer. We are committed to providing a safe, respectful, and professional workplace for all employees. You should be proficient in: • Creating Preventive Maintenance Plans, • Mechanical Troubleshooting Skills, • Electrical Troubleshooting, • Electrical Repair, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • CNC Machine Setup & Changeover, • Industrial Electrical Systems, • Mechanical Systems & Component Repair, • DOT & Equipment Inspection Compliance, • Lockout/Tagout (LOTO), • Equipment Repair & Maintenance, • Automotive Manufacturing Systems, • Automotive Repair & Service Systems, • Machine Safety Inspections

We're a consumer products company that owns and manages a portfolio of nationally recognized brands, and we're aiming to reach $500 million in revenue this year. Our products cover e-mobility, consumer electronics, outdoor power equipment, lawn and garden, cleaning and more, with global operations. We're looking for an Industrial Designer to shape the next generation of our products, from electric scooters and e-bikes to battery-powered outdoor tools. You know product design inside and out! Sketching, 3D CAD, rendering and color, material and finish. You create products that look great, are easy to use, and can actually be built at scale. You'll lead industrial design for new products across our brands, with a strong focus on Jetson e-mobility. That means turning briefs into concepts, building CAD models and photorealistic renders, and working closely with product development, engineering and our overseas factories to take designs from first sketch to mass production. Key Responsibilities: • Turn product briefs into design concepts through research, sketching and ideation., • Build 3D CAD models and photorealistic renders (KeyShot) for design reviews, sales presentations and marketing., • Develop color, material and finish (CMF) direction that fits each brand., • Design for manufacturing, working with engineering and factories on parting lines, materials, tolerances and cost., • Create prototypes and mockups, and test designs for ergonomics, usability and rider experience., • Prepare design files and specifications for factories, and review samples and production parts against the approved design., • Refresh existing products and design new models and variations across categories., • Design with safety and regulatory requirements in mind for battery-powered and e-mobility products., • Support marketing and packaging teams with product renders and design details., • Stay current on e-mobility, outdoor power equipment and consumer electronics design trends, materials and competitor products., • Work closely with Product Development, Engineering, Brand, Marketing and Sourcing teams throughout the product lifecycle. Qualifications: • 4+ years of industrial design experience with consumer products, ideally e-mobility, consumer electronics, sporting goods or outdoor power equipment., • A strong portfolio showing products taken from concept through mass production., • Strong sketching, 3D CAD and rendering skills., • Solid understanding of manufacturing processes, including plastic injection molding, metal and electronics housings., • Experience working with overseas factories on samples, tooling and production., • Strong CMF sense and attention to detail., • Experience with e-mobility or battery-powered products is a strong plus., • Bachelor's degree in Industrial Design or a related field. Tools & Skills: • 3D CAD software, • KeyShot or similar rendering tools., • Adobe Creative Suite (Photoshop, Illustrator)., • AI tools for concept exploration and visualization (a plus).

About the Role PTI Tech is seeking a hands-on Supply Chain Manager to lead purchasing, strategic sourcing, supplier management, inventory control, and warehouse/logistics operations. This role owns strategic purchasing and supplier relationships while providing overall oversight of warehouse and logistics execution through the Warehouse Supervisor. The ideal candidate brings strong manufacturing supply-chain experience and understands how purchasing decisions, supplier performance, inventory, and material availability directly impact production and customer delivery. What You'll Do Purchasing & Strategic Sourcing • Own purchasing activities for raw materials, plastics/resins, metal feedstock and powders, components, packaging, production supplies, and outside services., • Obtain competitive quotations and evaluate suppliers based on price, quality, lead time, freight, payment terms, reliability, and total cost., • Negotiate pricing, payment terms, minimum order quantities, lead times, freight terms, and supplier agreements., • Source, qualify, develop, and manage suppliers based on cost, quality, delivery, capacity, responsiveness, and overall performance., • Develop continuity plans and proactively address supplier and supply risks., • Manage secondary and outsourced-process suppliers and coordinate with Quality on certifications, nonconformances, and corrective actions., • Support quoting activities by obtaining current material, component, freight, tooling, and outside-service costs. Inventory, Materials & ERP/MRP • Use ERP/MRP demand, production schedules, usage, lead times, safety requirements, and inventory levels to determine purchasing timing and quantities., • Maintain accurate purchasing and supplier master data to support reliable MRP output., • Oversee inventory-control strategy, including ABC classifications and cycle counting., • Analyze inventory turns, days on hand, slow-moving, excess, and obsolete inventory., • Investigate inventory and material discrepancies and drive corrective actions., • Partner with Production, Planning, and Warehouse teams to ensure materials are available and staged for scheduled jobs. Warehouse, Logistics & Compliance • Directly manage the Warehouse Supervisor and maintain overall accountability for warehouse and logistics operations., • Oversee shipping, receiving, inventory accuracy, material staging, warehouse organization, 5S, and on-time customer shipments., • Oversee freight and carrier relationships, including LTL, FedEx, UPS, and other parcel carriers., • Manage customer and supplier returns/RMAs and ensure accurate ERP transactions., • Ensure domestic and international shipments comply with applicable ITAR, export-control, customs, and other regulated-shipping requirements. Leadership & Continuous Improvement • Partner with Finance, Production, Planning, Engineering/NPD, Quality, Sales, and Warehouse teams to resolve shortages, supplier issues, inventory exposure, pricing changes, and delivery risks., • Lead and develop the Warehouse Supervisor through clear priorities, expectations, coaching, and accountability., • Establish and improve standard work across purchasing, inventory, shipping, receiving, supplier management, and warehouse operations., • Track KPIs and implement improvements related to cost, supplier performance, delivery, inventory accuracy, material availability, freight, and working capital. What We're Looking For Required Qualifications • 5+ years of progressive experience in purchasing, procurement, supply chain, inventory, or materials management within a manufacturing environment., • Demonstrated experience managing suppliers and owning material availability, cost, and inventory performance., • Experience sourcing and negotiating raw materials, components, outside services, supplier agreements, payment terms, freight, lead times, and other commercial conditions., • Strong ERP/MRP experience with the ability to validate demand, inventory, lead times, supplier data, and system recommendations., • Working knowledge of inventory control, ABC classification, cycle counting, warehouse operations, material flow, and supplier performance., • Demonstrated leadership experience with strong analytical, communication, organizational, and problem-solving skills. Preferred Qualifications • Bachelor's degree in Supply Chain, Business, Engineering, Operations, or a related field; equivalent manufacturing experience may be considered., • Experience purchasing plastics/resins, metal feedstock or powders, and outsourced manufacturing services., • Experience in injection molding, MIM, CNC machining, or similar engineered manufacturing environments., • Experience in defense, aerospace, medical, or other regulated manufacturing environments., • Familiarity with ITAR/export controls, customs/export licensing, ISO 9001/AS9100, PPAP, or customer-specific supplier requirements., • Experience with supplier scorecards, RFQ/RFP processes, cost modeling, total-cost analysis, LTL freight negotiation, and parcel-carrier management., • IQMS/DELMIAWorks experience is preferred. What Success Looks Like • Strong supplier on-time delivery and quality performance., • Improved material costs and controlled purchase price variance., • Accurate inventory and completion of required cycle counts., • High on-time customer shipment performance., • Improved inventory turns and reduced excess/obsolete inventory., • Reliable material availability with minimal preventable production interruptions., • Effective freight-cost and carrier-performance management. Work Environment This is an on-site, hands-on manufacturing leadership role. The position requires regular movement between the office, warehouse, shipping/receiving, and manufacturing areas to verify material flow, inventory conditions, and supply-chain execution. The environment includes production-floor conditions, warehouse traffic, forklifts, trucks, noise, and temperature variation. Required PPE must be used in designated areas. Occasional supplier visits or business travel may be required.

MUST HAVES: • Independently set up Quality Management Systems from scratch (FDA Site Registration, ISO13485 Certification, • HEAVY HEAVY HEAVY Medical Device Manufacturing/Plastic Injection Molding, • Responsibilities, • Lead, maintain, and enhance the company’s ISO 13485–compliant Quality Management System, ensuring alignment with FDA QSR and applicable global regulations., • Drive and manage ISO 13485 certification, surveillance audits, and recertification cycles., • Oversee and execute FDA Site Registration, and ongoing regulatory maintenance for the manufacturing site., • Serve as the primary point of contact for regulatory bodies, notified bodies, and customer quality audits., • Manage core QMS processes including document control, CAPA, nonconformance management, supplier quality, internal audits, training systems, and risk management (ISO 14971). Equal Opportunity Employer/Veterans/Disabled Benefit offerings include medical, dental, vision, term life insurance, short-term disability insurance, additional voluntary benefits, commuter benefits and 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State or local law; and Holiday pay upon meeting eligibility criteria. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs which are direct hire to a client To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit _ The Company will consider qualified applicants with arrest and conviction records.

Mission PTI Tech is a leader in advanced engineered materials, delivering high-precision components to demanding industries including defense, aerospace, medical, and industrial. To support continued growth and operational excellence, we are hiring a Project Engineer II who will play a critical leadership role. The Project Engineer II leads new product development from concept through production handoff, independently managing technical projects across PTI’s injection molding, CNC, and sintering operations. This role partners with design, tooling, manufacturing, and quality teams to deliver products that meet performance, cost, schedule, and production-readiness goals. Using sound technical judgment, disciplined execution, and strong cross-functional collaboration, the Project Engineer II drives reliable, manufacturable solutions. The role also supports manufacturing through root cause analysis, automation integration, and continuous improvement initiatives that strengthen operational performance. Competencies – What This Person Must Be • Technical Expertise: Technically proficient in molding, MIM, CNC machining, and related manufacturing processes., • Organization & Project Management: Organized and self-directed, with strong project management capabilities., • Collaboration & Communication: Collaborative and effective in cross-functional and vendor-facing environments., • Analytical Problem Solving: Analytical and process-oriented, applying structured methods to solve problems., • Customer & Quality Focus: Customer- and quality-focused, ensuring deliverables meet expectations., • Adaptability: Adaptable, able to shift between NPD and production support as required. Technically proficient in molding, MIM, and CNC machining. Key Responsibilities • Manage assigned NPD projects independently from concept through validation and production launch., • Define and maintain project timelines, budgets, and risk assessments., • Lead design and tooling reviews, focusing on manufacturability and production readiness., • Lead or coordinate injection molding tooling design and supplier communication, ensuring manufacturability, cost efficiency, and part quality., • Design and manage CNC fixtures, secondary operation tooling, and sintering setters to ensure dimensional repeatability and efficiency., • Conduct and document debind and sintering studies to optimize performance, yield, and tolerance control., • Define and verify technical requirements for outsourced operations (coatings, heat treat, machining) and validate vendor compliance., • Collaborate with automation and vision system providers, supporting setup, system verification, and adjustments during project release., • Plan, execute, and document validation activities (IQ, OQ, PQ, FAI) in accordance with customer and QMS standards., • Lead injection molding, sampling, validation builds, and capability studies., • Provide support to the manufacturing team in resolving recurring or systemic production issues, or when NPD workload allows., • Mentor Project Engineer I team members and share technical best practices., • Participate in continuous improvement, lesson-learned documentation, and workflow optimization. Key Metrics & KPI’s • 90% or greater of projects delivered on schedule and within budget., • 95% or greater first-pass success for IQ/OQ/PQ and FAI validations., • 98% or greater accuracy in project and validation documentation., • Two percent or less corrective actions or rework post-launch., • 95% or greater functional uptime for automation systems during project release. Required Experience & Qualifications • Bachelor’s degree in Mechanical, Manufacturing, Plastics, or related Engineering field., • 3–5 years of relevant engineering experience (product or manufacturing)., • CAD proficiency (SolidWorks preferred)., • Knowledge of injection molding, CNC machining, tooling, and validation processes., • Familiarity with robotics, automation, or machine vision integration. Preferred Qualifications • Experience with APQP, Stage-Gate, or equivalent project management processes., • Hands-on involvement with automation or vision cell installations., • Working knowledge of SPC, PFMEA, DOE., • ERP or PLM system experience. Physical Requirements • Work in both office and production environments., • Lift up to 25 lbs., • Visual focus for design and inspection activities. Work Environment • Office and manufacturing floor exposure, including molding and automation systems., • Occasional travel for supplier, vendor, or customer meetings.

Our client is hiring an Assistant MV Department Manager Onsite in Irvington, NJ - Monday throught Friday - 7 am to 5 pm 1 to 2 Saturdays per month 7 am - 12 pm Salary starting at $150K dependent on experience The Assistant Medium Voltage Department Manager will partner with MV Department Manager to oversee all functions of MV Operations. Safety • Ensure safety standards are met within the working areas and collaborate with MV Department Manager and the EHS team on actions and sustainability., • Maintain a culture of safety, • Assist the Department Manager with all EHS notifications added to the EHS notification tracker, • Participate in Gemba walks and report findings during the weekly meeting, • Report, review and fill out MOCs ( Management of Change) as needed Reporting • Collaborate with the Department Manager regarding MDI (Daily stand-up) meetings and ensure actions created by the MDI are reviewed and closed in a timely manner., • Participate in monthly SIOP meetings and work directly with Sales, MV Product Manager and Planner to meet customer demand., • Drive root cause analysis meetings when targets aren’t achieved., • Participate in capacity and production efficiency projects, • Maintain the department’s scorecard, • Work with the C&I Team on OEE reporting and any other continuous improvement tasks Personnel/Human Resources • Responsible for the department’s head count based on customer demand and department targets. Request new hires as needed., • Responsible for onboarding new employees and terminating existing employees who do not meet department or company standards, • Manage the direct reports (Assembly/Packaging Manager, Electrical Testing Manager and Molding Production Manager), • Review and approve all requests for PTO in ADP (direct reports), • Provide coverage on time card approval though ADP by every week’s deadline Financials • Review and approve all Medium Voltage D365 system transactions and provide reason codes for variances, • Assist the Finance team with closing the fiscal month Maintenance/Facilities • Ensure proper 5S is followed in the MV production areas, • Coordinate with the Maintenance manager the PM (Preventative Maintenance) plan, • Work with Facilities Manager on projects requiring external contractors Quality • Work with QC Manager and Head of Quality on all applicable initiatives, • Participate in Quality related RCCAs, • Support the Department Manager ensuring the department’s conformance during the annual ISO audit Requirements • College Diploma is great preferred, • 3-5 years Management experience (Manufacturing preferred), • Company’s Quality Management System and ISO 9001:2015 awareness, • Strong communication, interpersonal, public speaking, and leadership skills., • Innovative with motivational mentality., • Excellent management, leadership, decision-making, and problem-solving skills., • Confident and goal oriented.

Job Description Operate Molding machines to load and unload parts Grinds excess flash off molded parts and blows clean Fills out Routing Sheet

Job Description Daily responsibilities vary greatly for remodelers depending on the property where they’re working and the types of building and repair tasks which need to be performed. The core duties that remodelers perform, however, are universally the same whether they work for themselves or within a company dynamic. Assess Work Sites Remodelers assess work sites where remodeling work is desired, and determine what needs to be done to complete the requested remodel work. Perform Carpentry Work Remodelers perform various carpentry tasks that include installing cabinets, hanging doors, and framing rooms. Replace Plumbing Fixtures Remodelers replace plumbing fixtures such as sinks, toilets, and faucets. Hang Drywall Remodelers hang, repair, and replace drywall as needed for new and existing rooms. Install Flooring Remodelers install floors, including wood floors, carpeting, concrete, and other flooring types. Lay Tile Remodelers install new tilework on floors and walls, place new grout, and repair existing tile. Follow All Building Codes Remodelers take out all required permits and follow building codes as set forth by city, county, and state laws. Make Repairs Remodelers repair existing property elements when possible. Perform Finish Work Remodelers install and replace trim, molding, windows, and perform other finish work. Replace Light Fixtures Remodelers replace light fixtures and ceiling fans. Clean Job Sites Remodelers clean up job sites during and after remodeling work. Remodeler Skills and Qualifications Remodelers use physical ability and mechanical skills to replace and repair walls, floors, roofs, cabinets, counters, and fixtures of all types in order to build new rooms and refurbish existing rooms. Employers and individuals look for remodelers who have the skills needed to perform these tasks. • Mechanical skills – remodelers use a variety of tools and perform many different tasks that include carpentry, plumbing, and light electrical work., • Communication – remodelers work collaboratively with construction workers and other professionals, which requires excellent verbal communication skills., • Physical ability – remodelers use physical ability to work with their hands and perform many tasks that require squatting, standing, and bending for hours at a time., • Attention to detail – because different aspects of remodeling work depend upon each other to function properly and look good, remodelers pay close attention to ensure that all work is performed well and correctly., • Multi-tasking – as remodelers perform work on different projects and rooms while using a vast variety of remodeling skills, multi-tasking is an essential component of the job. Tools of the Trade Remodelers work regularly with the following tools: • Hand tools (hammers, screwdrivers, saws, demolition bars), • Power tools (drills, nail guns, saws)\nCompany Description We've loved every minute of our journey. When you need home improvement service in New Jersey our team of skilled individuals will help you through all phases of repair, remodel, and renovation projects. As a U.S. Army veteran with 10 years experience, I serve New Jersey area. We are a community based home improvement company. No job too big or too small for the Elyte Homes crew. We've loved every minute of our journey. When you need home improvement service in New Jersey our team of skilled individuals will help you through all phases of repair, remodel, and renovation projects.\r\n\r\nAs a U.S. Army veteran with 10 years experience, I serve New Jersey area. We are a community based home improvement company. No job too big or too small for the Elyte Homes crew.

Job Description Lead CNC Programmer & Machinist Exothermic Molding August 2026 Exothermic Molding, one of the pioneers in Reaction Injection Molding (RIM), was founded in 1972 to provide parts to the medical, electronic, and lab instrument market. Since then, the company has expanded into many other applications and markets but remains committed to the RIM Molding process. Exothermic is also expanding capacity within the facility to increase efficiency and handle growth. Exothermic is continuing to expand its manufacturing capabilities to improve efficiency and support future growth. This is a great time to join our team. Exothermic Molding is seeking an experienced CNC Machinist and Programmer to help build the next generation of our in-house tooling capabilities.This is not simply a machining role. The successful candidate will lead CNC machining operations while working closely with engineering and production teams to develop tooling, molds, and manufacturing processes that support our growing RIM operations. You will be responsible for transforming customer requirements into production-ready tooling, developing machining processes, documenting best practices, training operators, and helping shape the future of our CNC and mold manufacturing department. This position offers a unique opportunity for an experienced CNC machinist and programmer to expand into mold design, tooling development, and manufacturing leadership while helping build Exothermic's in-house tooling capabilities. This is the perfect position for a motivated person with a good attitude who is results oriented, quality conscious, and reliable. We offer a competitive salary commensurate with experience, paid holidays/ vacation, and a great benefit package, including medical and a 401k retirement savings plan. Qualified candidates must have a High school diploma or equivalent (technical certifications or coursework in machining is a plus) and a minimum of 5 years of CAD/CAM CNC machining experience in a precision manufacturing environment. Proficiency in setting up and programming CNC machines is required along with a solid understanding of G-code programming and CAD/CAM software and a strong knowledge of machining processes, tooling selection, and material properties. Must be able to read and interpret complex engineering drawings and specifications and have a strong attention to detail, with a focus on producing high-quality, accurate parts. Excellent communication skills are a must, bilingual in Spanish, a plus. Qualified candidates should send a resume. Exothermic Molding Inc provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Exothermic Molding Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. \nCompany Description We are currently recruiting for an outside client...please read the job posting in its entirety for more details about the position. From compliance to recruitment and retention to operations and training methodologies, we will work with your company to solidify its basic structure and lay the foundation for growth. Creative Workforce Solutions thinks three to five years ahead of the workforce itself, implementing a forward-thinking approach to HR and technology for your workplace. We are currently recruiting for an outside client...please read the job posting in its entirety for more details about the position.\r\n\r\nFrom compliance to recruitment and retention to operations and training methodologies, we will work with your company to solidify its basic structure and lay the foundation for growth. Creative Workforce Solutions thinks three to five years ahead of the workforce itself, implementing a forward-thinking approach to HR and technology for your workplace.

Job DescriptionAssembly Operator – Glass Kits | 2nd Shift$25.00/Hour | Monday–Friday | 3:15 PM–11:30 PM | Temp-to-HireLocation: Carlstadt, NJ Job Type: Full-Time, Temp-to-Hire Shift: 2nd Shift Pay: Starting at $25.00/hour About the Opportunity We are currently hiring an experienced Assembly Operator – Glass Kits for our client, a manufacturing company located in Carlstadt, NJ. The Assembly Operator will be responsible for assembling glass kits into wood doors while ensuring proper fit, sizing, alignment, and finish. The ideal candidate will have hands-on experience working with moldings, measuring and cutting materials, installing molding, and applying caulk to a professional finished standard. Responsibilities • Assemble glass kits into doors according to job specifications., • Measure and accurately cut moldings to required dimensions., • Confirm door openings and verify the correct glass size before installation., • Install molding around glass units according to specifications., • Apply caulk neatly and consistently for a clean finished appearance., • Inspect completed doors for gaps, defects, misalignment, and overall quality., • Read and follow job tickets and work orders to confirm specifications., • Report material shortages, dimensional discrepancies, or other issues to the Production Supervisor., • Maintain a clean, organized, and safe assembly workstation., • Handle glass components carefully and follow all applicable safety procedures.Requirements, • Minimum 3 years of experience assembling with moldings required., • Experience measuring and cutting moldings accurately., • Experience verifying door openings and glass sizing for proper fit., • Experience installing molding and applying caulk to a finished standard., • Ability to read and understand job tickets and work orders., • Strong attention to detail and craftsmanship., • Ability to work accurately and efficiently in a production environment., • Reliable attendance and punctuality., • Ability to work independently and as part of a team.Physical Requirements, • Ability to stand for extended periods., • Ability to lift and move doors and glass units up to 75 lbs., with assistance as needed., • Ability to bend, reach, and use hands and arms repetitively., • Ability to carefully handle glass components., • Ability to safely perform the physical requirements of a manufacturing environment.

Job Description INJECTION MOLDING TECHNICIAN We are seeking an experienced Injection Molding Technician with a strong background in plastic injection molds, machining, mold repair, and modification. This is an excellent opportunity with an established company offering excellent benefits, long-term stability, and an opportunity for a career through retirement. Key Responsibilities & Qualifications ☐ Hands-on experience with plastic injection molding machines ☐ Experience repairing, adjusting, modifying, and designing injection molds ☐ Strong background in injection mold making and maintenance ☐ Ability to troubleshoot and repair plastic injection molds ☐ General machine shop experience, including milling and related machining equipment ☐ CNC machining experience strongly preferred ☐ Manual machining experience desired ☐ Ability to read and understand blueprints, engineering drawings, schematics, and specifications ☐ Strong mechanical troubleshooting and problem-solving skills ☐ Ability to work independently and maintain high-quality standards ☐ Tool & Diemaker welcomed Ideal Candidate The ideal candidate will have a strong general machining background, including milling and CNC machining, combined with hands-on experience working with plastic injection molds. We are particularly interested in candidates who have experience designing, repairing, modifying, maintaining, and troubleshooting injection molds and who can bring a strong machine-shop skill set to the position. Long-Term Opportunity This is an established company with excellent benefits and a strong commitment to its employees. We are looking for someone who wants more than just another job—someone interested in long-term employment and the opportunity to build a career with a company through retirement. If you have the injection molding, mold-making, repair, and machining expertise we are looking for, please submit your resume through this platform. We will review your qualifications and contact you regarding the opportunity. \nCompany Description · Stable company with long-term career opportunities · Competitive compensation · Overtime opportunities (when available) · Excellent work environment · Benefits package (where applicable) · Stable company with long-term career opportunities\r\n· Competitive compensation\r\n· Overtime opportunities (when available)\r\n· Excellent work environment\r\n· Benefits package (where applicable)

Job Description Quality Control Inspector Performs inspections on all molded and incoming material. Checks bill of materials on all outgoing orders. High School Education required Fluency in English and Spanish Computer skills – Word, Excel Need to use calipers and other measurement equipment. Must be able to read drawings

Job Description Engineering Manager On-site: Paterson, NJ Position Summary The Engineering Manager leads the complete new product development lifecycle from project award through production readiness and manufacturing handoff. This role oversees Engineering, Project Management, and Tool Room operations while ensuring projects are delivered on time, within budget, and in compliance with quality and customer requirements. The position combines hands-on technical leadership with people management, supporting injection molding, metal injection molding (MIM), CNC machining, tooling, automation, and manufacturing process development. Main Duties & Responsibilities Lead new product development projects from project kickoff through engineering, tooling, validation, and production launch. Manage Engineering, Project Management, and Tool Room teams while driving performance, accountability, and resource planning. Oversee tooling development, process validation, manufacturability, automation, and technical problem-solving. Partner with Sales and Business Development on technical reviews, quoting, manufacturability assessments, and customer support. Ensure compliance with ISO 9001, ITAR requirements, project budgets, schedules, and successful manufacturing handoffs. Key Skills Injection Molding, Metal Injection Molding (MIM), and CNC Manufacturing (3, 4, and 5-axis) Engineering Leadership, Project Management, and Tool Room Oversight CAD, GD&T, DFM, FMEA, Process Validation, and Manufacturing Optimization Mold/Tool Design and Mastercam Programming Non-Negotiable Requirements Candidates must demonstrate direct, hands-on experience in at least one of the following, backed by specific, verifiable project examples (not just familiarity or oversight-level exposure): Hands-on plastics processing expertise: able to run scientific molding directly at the machine, including setting and troubleshooting process parameters. Full tool/mold design experience: capable of designing injection molding tooling start to finish. Or, Mastercam expertise at a demonstrated, expert level, combined with engineering and management experience to support it. CNC machining experience across 3, 4, and 5-axis work is required in addition to the above. Education & Requirements Bachelor's degree in Mechanical Engineering, Materials Science, or a related engineering discipline (or equivalent experience). Minimum of 7 years of experience in injection molding, MIM, CNC machining, or related manufacturing engineering. Experience leading engineering teams, project managers, and tooling operations. Strong knowledge of CAD, GD&T, DFM, FMEA, validation processes, and ERP systems. Experience working within ISO 9001 and ITAR-regulated manufacturing environments. U.S. citizenship required for ITAR compliance. Master's degree, PMP certification, or experience in medical device, aerospace, defense, robotics, or automation is preferred. Benefits Health insurance Paid time off (PTO) 401(k) Location & Compensation Location: On-site in Paterson, NJ. Compensation starting at $140,000+, commensurate with experience. Relocation assistance available.

Job DescriptionBenefits: • Health insurance, • Paid time off, • Training & development, • Company parties, • Flexible schedule Reports To: Sales Project Manager About Us We are a premier, locally owned Kitchen and Bath Tune-Up franchise operating in Northern New Jersey. We specialize in high-ticket, rapid-turnaround custom kitchen and bath remodeling projects ranging from $20,000 to $100,000+, delivering flawless execution and bespoke design. We have built an exceptional reputation in communities like Montclair, Glen Ridge, and West Orange, and our consistent, year-round growth means we need top-tier talent to support our operations. The Role Our Sales Consultants are incredibly successful at bringing in new business, and we need a highly organized, detail-obsessed Design Drafter & Project Coordinator to take the baton once the initial sale is made. You will be the crucial bridge between our sales team, our clients, our vendors, and our installation crews. Reporting directly to the Sales Project Manager, you will transform conceptual sales sketches into breathtaking 3D renderings, exact technical specifications, and bulletproof execution packets. If you love creating photorealistic designs, mapping out cabinet modifications, and managing the logistical puzzle of a remodel without the pressure of commission-based prospecting, this is your ideal role. Core Responsibilities Visual Renderings & Technical Drafting • Receive the post-sale handoff from the Design Sales Consultants., • Produce high-quality, photorealistic 3D renderings that allow homeowners to fully visualize their new space and secure final design sign-off., • Finalize and refine designs in 20/20 (or similar software) ensuring exact clearances, filler requirements, and functional flow., • Review and verify field measurements against the proposed design to guarantee perfect fitment before ordering. Procurement & Vendor Management • Translate approved 20/20 designs into exact vendor order sheets., • Map custom specifications to specific manufacturer codes (e.g., custom cabinet doors, drawer boxes, millwork, and hardware)., • Place orders, track ETAs, and proactively manage backorders or shipping delays. Installation Coordination & Support • Create comprehensive "Installation Packets" for the field crews, including detailed floor plans, annotated elevations, and complete material checklists., • Assist the Sales Project Manager with gathering documentation for municipal permits and inspections., • Act as a technical liaison for the installer if on-site design translation questions arise. Post-Sale Client Experience • Conduct design review sessions with clients to present 3D renderings and finalize material selections., • Maintain weekly contact with the homeowner during the waiting period between the sale and installation., • Update clients on material shipping statuses and project timelines. Qualifications & Requirements • Experience: Minimum 2 years of experience in kitchen and bath drafting, rendering, estimating, or project coordination., • Software Proficiency: Highly proficient in 20/20 Design software (or equivalent like ProKitchen/Chief Architect) with a strong portfolio of 3D renderings., • Technical Knowledge: Deep understanding of cabinetry nomenclature, catalog reading, construction methods, and building materials., • Attention to Detail: You measure twice, order once, and spot the missing toe-kick or crown molding before it becomes a problem on the job site., • Communication: Professional demeanor with the ability to communicate technical and aesthetic details clearly to both rough-and-tumble installers and high-end residential clients., • Must have reliable transportation for occasional site visits in the Essex County area. Compensation & Benefits • Competitive Base Salary (Commensurate with experience), • Performance bonuses based on order accuracy and project profitability, • Pension plan provided after 90 days with employer match, • Mileage and expense reimbursement, • Consistent, year-round work (no seasonal dips), • Ongoing training and a supportive, collaborative back-office environmen

Job Description Our client in East Hanover, NJ is looking for a Molding Technician for a Full time Direct Hire position. Hours: Fulltime (Flexible Shifts) Pay rate: $25 - $27/hr Responsibilities: • Responsible for the cleanliness and condition of all equipment and space within their work space., • Must be totally knowledgeable of set-up procedures and understand all aspects of part process. (Process adjustments, automation, major & minor inspection criteria, troubleshooting, etc). The team member must understand and use daily, the Production Monitoring System and support the collection of accurate and timely data. Requirements: • High School Graduate or Equivalent., • Minimum of three (3) years of experience with Molding Technology., • Must have good PC skills., • ISO/QS/TS knowledge preferred., • Lifting of containers weighing up to 65+ lbs., • Considerable time spent on feet and walking will be required. Benefits: The company offers a competitive benefits package that includes medical, dental, vision, 401k, pet insurance, etc... \nCompany Description PrideStaff is a 16 time Best of Staffing Award Winning full-service staffing company. PrideStaff is a 16 time Best of Staffing Award Winning full-service staffing company.

Job DescriptionCompany Description About KIPP New Jersey KIPP New Jersey is part of the nationally recognized “Knowledge Is Power Program” network of free, open-enrollment, college-preparatory public schools dedicated to preparing students for success in college and in life. In 2002, KIPP New Jersey first opened its doors in Newark’s South Ward as a single class of 80 fifth graders and has since grown to educate 7,035 students in grades K-12 across 18 schools in Newark, Camden, and Paterson. More than 90% of KIPP New Jersey students currently qualify for free or reduced meals. To learn more, visit www.kippnj.org. Job Description High School Lead Teacher KIPP New Jersey is looking for a motivated teacher with a track record of molding future leaders in our communities. You are passionate about education and understand the importance of building strong relationships in generating student achievement. You are dedicated to going above and beyond to ensure our students succeed. We are looking for teachers in the following subject areas: • English Language Arts (ELA), • History, • Math: Algebra, Geometry, Trigonometry, or Calculus, • Science: Biology, Chemistry, or Physics, • College and Career Readiness, • Enrichment: Physical Education, Music, Art, Theatre, etc., • Foreign Language: Spanish Here’s what you’ll be doing: Joining our schools as a teacher comes with the opportunity for significant growth and development, but with great power comes great responsibility. Your role as a teacher will include a number of responsibilities which will include but are not limited to: • Create, internalize, modify and prepare lesson plans in accordance with academic curriculum, working closely with the grade level team., • Use data to responsively teach to mastery of academic skills., • Work closely with students, families and colleagues to create an environment that is supportive of student progress., • Reinforce a firm foundation for all classes and uphold classroom management techniques., • Help with diagnostic and progress monitoring testing across the school, • Monitor student progress and adjust teaching strategies to ensure all students meet the learning objectives., • Update student performance trackers and use data to help guide your lesson plans., • Participate in school, departmental and parent meetings., • Participate in school events, activitiesQualifications Skills and Mindsets • A belief in every student’s limitless potential., • A track record of success in the classroom., • Subject matter expertise., • A demonstrated interest in working with students from diverse economic and cultural backgrounds., • A collaborative attitude towards teaching and learning., • A record of exceptional student achievement and results at a high-performing charter network/charter management organization., • A belief that all students deserve a world class education which can be achieved through education reform Certification Requirements In order to be eligible for hire, all general education teaching candidates must meet the following criteria (details below): • Hold a valid teaching certification in NJ –or–, • Meet The GPA Requirement GPA Requirement • If you graduated after September 2016:, • Have a bachelor’s or master’s GPA on a conferred degree that is ≥ 3.0 –or–, • Have a bachelor’s or master’s GPA on a conferred degree that is between 2.75 and 3.0 AND demonstrate that you have passed all required Praxis exams with a +10% passing score (super scores), • If you graduated before September 2016:, • Have a bachelor’s or master’s GPA on a conferred degree that is ≥ 2.75 Additional Information KIPP NJ offers competitive salaries to newly hired lead teachers. Salaries are based on prior experience and in accordance with certification requirements. KIPP NJ offers a competitive salary range of $65,000-$103,000+ for teacher positions with additional opportunities for earning up to $7,000 annually in performance-based pay. In addition to a competitive salary, KIPP NJ offers a generous benefits package including, but not limited to, the following: • Robust benefits that include medical, dental, and vision, • Participation in the New Jersey Teachers Pension and Annuity Fund, provided appropriate teacher certification, • Optional participation in the KIPP NJ 403b retirement plan, including matching contributions, • A school-issued laptop, • Transportation benefits for TEAMmates commuting into Newark from the New York City area, • Generous Time-Off including 3.5-4 school vacation weeks (depending on the year), allocated sick and personal days, and an extended summer break, • Up to 12 weeks 100% parental leave for primary caregivers, • Employer paid life insurance, • Extensive optional ancillary benefits including, short term and long term disability and accident and hospital indemnity Our organization is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender, age, religion, national origin, citizen status, marital status, physical or mental disability, military or veteran status, sexual orientation, gender identity, or any other characteristic protected by applicable law. Our organization will make a reasonable accommodation to known physical or mental limitations of a qualified applicant or employee with a disability unless the accommodation would impose an undue hardship on the operation of the organization. No questions on this application are asked for any unlawful purpose. #LI-NJ

Job Description P&M Carpentry Inc. is looking for an experienced Finish Carpenter / Custom Millwork Carpenter to join our team. We are especially interested in someone with strong experience building and fabricating custom millwork, built-ins, cabinetry, wall units, and furniture-style pieces. Responsibilities: • Build and fabricate custom built-ins, wall units, cabinetry, and furniture-style pieces, • Perform custom millwork fabrication and detailed finish carpentry, • Build projects from plans, drawings, and measurements, • Install interior doors and hardware, • Install crown molding, baseboard, casing, wall panels, and other architectural trim, • Complete custom projects from fabrication through final installation, • Produce precise, clean, high-quality work, • Maintain a clean and organized work environment Qualifications: • Strong experience with custom fabrication and building projects from scratch is required., • Strong experience with custom fabrication and building projects from scratch is highly preferred, • Experience with doors, trim, molding, cabinetry, built-ins, and detailed finish work, • Ability to read plans, drawings, and measurements, • Strong attention to detail and craftsmanship, • Ability to work independently as well as part of a team, • Reliable and committed to producing high-quality work Compensation & Benefits: • $27–$30 per hour, based on experience and skill level, • 1 week paid vacation, • 7 paid federal holidays \nCompany Description P&M Carpentry Inc. is an established carpentry company serving New Jersey and New York since 1997. We specialize in high-quality finish carpentry, custom millwork, doors, trim, built-ins, cabinetry, and detailed architectural woodwork. We work on residential and commercial projects and take pride in quality craftsmanship, attention to detail, and professional work. We are looking for skilled, reliable carpenters who want to be part of an experienced and growing team. P&M Carpentry Inc. is an established carpentry company serving New Jersey and New York since 1997. We specialize in high-quality finish carpentry, custom millwork, doors, trim, built-ins, cabinetry, and detailed architectural woodwork. We work on residential and commercial projects and take pride in quality craftsmanship, attention to detail, and professional work. We are looking for skilled, reliable carpenters who want to be part of an experienced and growing team.

Job DescriptionCompany Description About KIPP New Jersey KIPP New Jersey is part of the nationally recognized “Knowledge Is Power Program” network of free, open-enrollment, college-preparatory public schools dedicated to preparing students for success in college and in life. In 2002, KIPP New Jersey first opened its doors in Newark’s South Ward as a single class of 80 fifth graders and has since grown to educate 7,035 students in grades K-12 across 15 schools in Newark, Camden, and Paterson. More than 90% of KIPP New Jersey students currently qualify for free or reduced meals. To learn more, visit www.kippnj.org. Job Description Middle School Math Lead Teacher KIPP New Jersey is looking for a motivated teacher with a track record of molding future leaders in our communities. You are passionate about education and understand the importance of building strong relationships in generating student achievement. You are dedicated to going above and beyond to ensure our students succeed. Here’s what you’ll be doing: Joining our schools as a teacher comes with a lot of growth opportunities, but with great power comes great responsibility. Your role as a teacher will involve a number of responsibilities which will include but are not limited to: • Create, internalize, modify and prepare lesson plans in accordance with academic curriculum, working closely with the grade level team, • Use data to responsively teach to mastery of academic skills, • Work closely with students, families and colleagues to create an environment that is supportive of student progress, • Reinforce a firm foundation for all classes and uphold classroom management techniques, • Help with diagnostic and progress monitoring testing across the school, • Monitor student progress and adjust teaching strategies to ensure all students meet the learning objectives, • Update student performance trackers and use data to help guide your lesson plans, • Participate in school, departmental and parent meetings, • Participate in school events, activities and programs both during and outside of regular class instruction hours.Qualifications Skills and Mindsets • A belief in every student’s limitless potential., • A track record of success in the classroom., • Subject matter expertise., • A demonstrated interest in working with students from diverse economic and cultural backgrounds., • A collaborative attitude towards teaching and learning., • A record of exceptional student achievement and results at a high-performing charter network/charter management organization., • A belief that all students deserve a world class education which can be achieved through education reform Certification Requirements In order to be eligible for hire, all general education teaching candidates must meet the following criteria (details below): • Hold a valid teaching certification in NJ –or–, • Meet The GPA Requirement GPA Requirement • If you graduated after September 2016:, • Have a bachelor’s or master’s GPA on a conferred degree that is ≥ 3.0 –or–, • Have a bachelor’s or master’s GPA on a conferred degree that is between 2.75 and 3.0 AND demonstrate that you have passed all required Praxis exams with a +10% passing score (super scores), • If you graduated before September 2016:, • Have a bachelor’s or master’s GPA on a conferred degree that is ≥ 2.75 Additional Information KIPP NJ offers competitive salaries to newly hired lead teachers. Salaries are based on prior experience and in accordance with certification requirements. KIPP NJ offers a competitive salary range of $65,000-$103,000+ for teacher positions with additional opportunities for earning up to $7,000 annually in performance-based pay. In addition to a competitive salary, KIPP NJ offers a generous benefits package including, but not limited to, the following: • Robust benefits that include medical, dental, and vision, • Participation in the New Jersey Teachers Pension and Annuity Fund, provided appropriate teacher certification, • Optional participation in the KIPP NJ 403b retirement plan, including matching contributions, • A school-issued laptop, • Transportation benefits for TEAMmates commuting into Newark from the New York City area, • Generous Time-Off including 3.5-4 school vacation weeks (depending on the year), allocated sick and personal days, and an extended summer break, • Up to 12 weeks 100% parental leave for primary caregivers, • Employer paid life insurance, • Extensive optional ancillary benefits including, short term and long term disability and accident and hospital indemnity Our organization is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender, age, religion, national origin, citizen status, marital status, physical or mental disability, military or veteran status, sexual orientation, gender identity, or any other characteristic protected by applicable law. Our organization will make a reasonable accommodation to known physical or mental limitations of a qualified applicant or employee with a disability unless the accommodation would impose an undue hardship on the operation of the organization. No questions on this application are asked for any unlawful purpose. #LI-NJ

Job Description Lead Carpenter – Residential Remodeling & New Builds Unique Home Remodeling Professionals, LLC — South Jersey Pay: $30/hr (Full-Time, Overtime Available) Schedule: Monday–Friday, occasional Saturdays during busy periods (40+ hours/week) Location: South Jersey & Surrounding Areas Experience Required: Minimum 5 years in residential carpentry About Us Unique Home Remodeling Professionals (UHRP) is a growing, family-operated general contracting company specializing in high-end residential remodeling, custom home builds, and additions throughout South Jersey. From $50k renovations to $1M+ new homes, we are known for our workmanship, reliability, and strong client relationships. We are seeking an experienced, motivated Lead Carpenter who can both manage job sites and perform hands-on carpentry at a high level. This position is critical to maintaining UHRP’s standards for quality and professionalism. Position Overview The Lead Carpenter will act as the primary on-site leader for residential construction projects. This is a fully hands-on role requiring strong carpentry skills, leadership ability, and the capacity to run job sites with little to no supervision. You will perform and oversee carpentry tasks, coordinate with subcontractors, maintain jobsite productivity, and ensure projects stay on schedule with high-quality results. Key Responsibilities Lead daily on-site operations for remodeling projects, additions, and new residential builds Perform hands-on carpentry including: Framing (rough + structural) Trim work (casing, baseboard, doors, crown molding, etc.) Installation of doors, windows, and architectural details Standard carpentry trade techniques required for residential construction Manage workflow, assign tasks, and maintain productivity Oversee subcontractors (electrical, plumbing, HVAC, masonry, etc.) to ensure quality and schedule alignment Read and interpret blueprints, plans, and architectural drawings Maintain a clean, safe, and organized job site Track materials, prevent waste, and manage inventory Communicate daily with project management and ownership regarding progress and site needs Ensure all work meets UHRP quality standards and complies with building codes Represent UHRP professionally when interacting with clients and homeowners Required Qualifications Minimum 5 years of residential carpentry experience (must be proficient in framing & trim) Strong understanding of standard carpentry techniques, tools, and safety procedures Ability to run job sites independently and lead small crews when needed Reliable transportation to job sites Must have your own carpentry tools and tool belt Ability to lift 50+ lbs regularly Ability to follow schedules, meet deadlines, and maintain a high level of organization Strong communication and problem-solving skills Dependable, punctual, self-motivated, and hardworking What We Offer Competitive pay at $30/hr 40+ hours per week during busy periods (overtime available) Consistent year-round work Opportunity for advancement as the company continues to grow Family-oriented and supportive work environment Involvement in high-end residential projects and custom home builds Why Work With UHRP? You will work directly with ownership and be a key part of a company that is rapidly expanding. We value professionalism, craftsmanship, and teamwork — and we reward employees who show initiative, leadership, and dedication. At UHRP, you’re not “just a carpenter” — you’re the driving force behind projects that homeowners rely on and trust. How to Apply Submit your resume, work history, or a brief summary of relevant experience. Candidates must meet the required qualifications to be considered.

\n \n Onsite in Irvington, NJ - Monday throught Friday - 7 am to 5 pm \n 1 to 2 Saturdays per month 7 am - 12 pm \n Salary starting at $150K dependent on experience \n \n The Medium Voltage Department Manager will oversee all functions of MV Operations. \n Safety \n\n • Ensure safety standards are met within the working areas and collaborate with MV Department Manager and the EHS team on actions and sustainability.\n, • Maintain a culture of safety\n, • Assist the Department Manager with all EHS notifications added to the EHS notification tracker\n, • Participate in Gemba walks and report findings during the weekly meeting\n, • Report, review and fill out MOCs ( Management of Change) as needed\n\n Reporting \n\n • Collaborate with the Department Manager regarding MDI (Daily stand-up) meetings and ensure actions created by the MDI are reviewed and closed in a timely manner.\n, • Participate in monthly SIOP meetings and work directly with Sales, MV Product Manager and Planner to meet customer demand.\n, • Drive root cause analysis meetings when targets aren’t achieved.\n, • Participate in capacity and production efficiency projects\n, • Maintain the department’s scorecard\n, • Work with the C&I Team on OEE reporting and any other continuous improvement tasks\n\n Personnel/Human Resources \n\n • Responsible for the department’s head count based on customer demand and department targets. Request new hires as needed.\n, • Responsible for onboarding new employees and terminating existing employees who do not meet department or company standards\n, • Manage the direct reports (Assembly/Packaging Manager, Electrical Testing Manager and Molding Production Manager)\n, • Review and approve all requests for PTO in ADP (direct reports)\n, • Provide coverage on time card approval though ADP by every week’s deadline\n\n Financials \n\n • Review and approve all Medium Voltage D365 system transactions and provide reason codes for variances\n, • Assist the Finance team with closing the fiscal month\n\n Maintenance/Facilities \n\n • Ensure proper 5S is followed in the MV production areas\n, • Coordinate with the Maintenance manager the PM (Preventative Maintenance) plan\n, • Work with Facilities Manager on projects requiring external contractors\n\n Quality \n\n • Work with QC Manager and Head of Quality on all applicable initiatives\n, • Participate in Quality related RCCAs\n, • Support the Department Manager ensuring the department’s conformance during the annual ISO audit\n\n Requirements \n\n • College Diploma is great preferred\n, • 3-5 years Management experience (Manufacturing preferred)\n, • Company’s Quality Management System and ISO 9001:2015 awareness\n, • Strong communication, interpersonal, public speaking, and leadership skills.\n, • Innovative with motivational mentality.\n, • Excellent management, leadership, decision-making, and problem-solving skills.\n, • Confident and goal oriented.\n\n

Job Description Production Team Lead Exothermic Molding August 2026 Exothermic Molding, one of the pioneers in Reaction Injection Molding (RIM), was founded in 1972 to provide parts to the medical, electronic, and lab instrument market. Since then, the company has expanded into many other applications and markets but remains committed to the RIM Molding process. Exothermic is also expanding capacity within the facility to increase efficiency and handle growth. This is a great time to join our team. Exothermic Molding, Inc. is seeking a talented Production Team Lead to join our team. The Production Team Lead is responsible for packaging products, part assembly, masking, Silk Screen application, drilling operations, and packaging products, and shipment preparation with the use of necessary equipment. The Production Team is also responsible for both in-process inspection and final inspection of products before shipment. The role reports to the General Manager and Quality Manager. This is a great opportunity to learn new skills over time. Manage and work with department staff to comply with company production and quality standards, while maintaining good manufacturing practices. In addition, you will be expected to achieve throughput and quality goals by effectively using documentation, equipment, and labor provided by the company. The Production Team Lead executes and coordinates a daily inspection and packaging plan created by the Production Scheduler. It involves reading and following the documents that describe the operations required, while assuring that all the parts comply with inspection and quality standards and as defined in the process documents, shop drawings and first piece sample. It should be noted that employees are given responsibility to read process documents and interpret whether all required operations have been performed per the defined process prior to performing their operation. This is the perfect position for a motivated person with a good attitude who is results oriented, quality conscious, and reliable. We offer a competitive salary commensurate with experience, paid holidays/ vacation, and a great benefit package, including medical and a 401k retirement savings plan. Qualified candidates must have a High School diploma or GED Bachelor's degree along with the ability to read and interpret shop drawings, measure, and inspect parts to assure compliance with customer standards. Experience in a leadership role, with the ability to lead a team to achieve goals is preferred. Must be detail oriented when completing assigned tasks while meeting and/or surpassing production requirements and have strong communication skills. Must be physically able and willing to stand for entire work shift to complete assigned tasks and be able to work independently and as part of a team. Qualified candidates should send a resume. Exothermic Molding Inc provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Exothermic Molding Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. \nCompany Description We are currently recruiting for an outside client...please read the job posting in its entirety for more details about the position. From compliance to recruitment and retention to operations and training methodologies, we will work with your company to solidify its basic structure and lay the foundation for growth. Creative Workforce Solutions thinks three to five years ahead of the workforce itself, implementing a forward-thinking approach to HR and technology for your workplace. We are currently recruiting for an outside client...please read the job posting in its entirety for more details about the position.\r\n\r\nFrom compliance to recruitment and retention to operations and training methodologies, we will work with your company to solidify its basic structure and lay the foundation for growth. Creative Workforce Solutions thinks three to five years ahead of the workforce itself, implementing a forward-thinking approach to HR and technology for your workplace.

Join Weiss-Aug A Leader in Precision Manufacturing and Innovation Be part of a company that's shaping the future of manufacturing where your ideas, skills, and passion matter. Weiss-Aug, is a leading provider of advanced manufacturing and engineering solutions with advanced facilities across the U.S. and Mexico for over 50 years. Why Join Us? At Weiss-Aug we are driven by a commitment to excellence, innovation, and continuous improvement. As a recognized leader in the industrial and commercial sectors, specializing in high-volume metal stamping, thermoplastic molding, and value-added assembly solutions for the medical, aerospace & defense, automotive, interconnect, telecommunications and consumer goods industries, we take pride in cultivating a collaborative and forward-thinking work environment. We're currently seeking a passionate and skilled Machine Operator- Stamping to join our team and contribute to our mission of delivering high-quality, engineered solutions to our customers worldwide. In this role you will be responsible for assist with daily press room activities during the production run. Responsibilities: • Change and set up production reel., • Rewind production reels., • Edit reels for Quantity, Quality, etc., • Rewind interliner., • Change production totes., • Maintain clean work area., • Maintain Lot Control ticket system., • During production run, maintain sample submission to Q.C. according to Routing., • Coordinate packaging material requirements between Press Room and Warehouse., • Perform required visual checks to verify quality of product., • During production run perform gauging verification (Go No Go gauges)., • Interface with Die Setter and Q. C. providing support functions., • Operate Power Press according to Weiss-Aug Co. Inc. standards. Requirements: • High School Diploma or equivalent., • Fluent in English., • Ability to read precision measuring instruments and conduct basic arithmetic calculations., • Must be able to lift 50lbs, • Must be able to stand for long periods to time This position is at our East Hanover, NJ location. Pay Range: $18.50 per hour Other Benefits Include: • Medical, Dental and Vision, • 401 (k) with company match, • Holiday, Vacation and Sick Time, • Tuition Reimbursement, • Health Savings Accounts (HAS), • Flexible Spending Accounts (FSA), • Cigna Wellness Incentive Program, • Employee Assistance Program (EAP), • Short Term Disability, • Group Life and Accidental Insurance, • Sun Life Accident, Critical Illness, and Hospital Indemnity Insurance, • Smoking Cessation Program, • Pet Insurance US Pay Transparency The base salary for this role will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. If your salary requirements exceed the advertised range and you remain interested in Weiss-Aug, we encourage you to apply. Weiss-Aug is an Equal Opportunity/Affirmative Action Employer. Applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, protected veteran status, disability, or any other characteristics protected by applicable federal, state, or local law.

Be part of a company that's shaping the future of manufacturing where your ideas, skills, and passion matter. Weiss-Aug, is a leading provider of advanced manufacturing and engineering solutions with advanced facilities across the U.S. and Mexico for over 50 years. Why Join Us? At Weiss-Aug we are driven by a commitment to excellence, innovation, and continuous improvement. As a recognized leader in the industrial and commercial sectors, specializing in high-volume metal stamping, thermoplastic molding, and value-added assembly solutions our Weiss-Aug MedPharma serves the medical device and life science industry, offering unparalleled vertically integrated manufacturing solutions, partnered with in-house product design and engineering services. These combined capabilities provide Weiss-Aug a strategic advantage over the competition, being able to offer our customers a true, single-source supplier option, to meet their most challenging product innovation needs. As we continue to push the boundaries of what is possible, including our latest advancements in materials science, specialty coatings, laser processing, and hybrid additive manufacturing technologies Weiss-Aug MedPharma needs the best minds in industry. Expanding our team is paramount, bringing in fresh perspectives, ideas and broad-based talent to further enhance our solution offerings, driving new growth and supporting our technology roadmap including the release of finished drug-delivery / combination devices and machined implants. We're currently seeking a passionate and skilled Tool & Die Maker to join our team and contribute to our mission of delivering high-quality, engineered solutions to our customers worldwide. Responsibilities • Constructs, alters, and repairs a wide variety of tools, dies, jigs, fixtures, and gauges to very close tolerance., • Develops strategies for fabricating die components using the most efficient machining methodology., • Maintains specified tolerance to warrant proper qualification of the stamped product., • Meets all quality and efficiency expectations., • Demonstrated ability for using shop mathematics, handbook of geometric and trigonometric formulas., • Ability to work from drawings and sketches., • Ability to use all types of precision measuring instruments., • Thorough knowledge of machine shop practices, principles of mechanics, machine shop operations, and the working generalities of material Requirements • HS diploma required., • Completion an approved Tool and Die Maker state apprenticeship program. Other Benefits Include • Medical, Dental and Vision, • 401 (k) with company match, • Holiday, Vacation and Sick Time, • Tuition Reimbursement, • Health Savings Accounts (HAS), • Flexible Spending Accounts (FSA), • Cigna Wellness Incentive Program, • Employee Assistance Program (EAP), • Short Term Disability, • Group Life and Accidental Insurance, • Sun Life Accident, Critical Illness, and Hospital Indemnity Insurance, • Smoking Cessation Program, • Pet Insurance US Pay Transparency The base salary for this role will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. If your salary requirements exceed the advertised range and you remain interested in Weiss-Aug, we encourage you to apply. Weiss-Aug is an Equal Opportunity/Affirmative Action Employer. Applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, protected veteran status, disability, or any other characteristics protected by applicable federal, state, or local law.

The Project Engineer II leads new product development from concept through production handoff, independently managing technical projects across PTI’s injection molding, CNC, and sintering operations. Using sound technical judgment, disciplined execution, and strong cross-functional collaboration,

Manage the direct reports (Assembly/Packaging Manager, Electrical Testing Manager and Molding Production Manager). Ensure proper 5S is followed in the MV production areas. Participate in capacity and production efficiency projects.

The Project Engineer II leads new product development from concept through production handoff, independently managing technical projects across PTI’s injection molding, CNC, and sintering operations. To support continued growth and operational excellence, we are hiring a Project Engineer II who wi

Ensure community facilities are well maintained.Schedule and participate in maintenance projects.Perform plumbing work such as clearing stoppages, replacing fittings, zone valves, pipe sections, etc.Perform carpentry work such as fitting doors, replacing molding, repairing structural framing, and re

Hands-on mechanical experience with blow molding equipment. The Blow Molding Mechanic must be reliable, safety-focused, and able to respond quickly when equipment issues happen.

Job DescriptionCompany Description About KIPP New Jersey KIPP New Jersey is part of the nationally recognized “Knowledge Is Power Program” network of free, open-enrollment, college-preparatory public schools dedicated to preparing students for success in college and in life. In 2002, KIPP New Jersey first opened its doors in Newark’s South Ward as a single class of 80 fifth graders and has since grown to educate students in grades K-12 across 18 schools in Newark, Camden, and Paterson. More than 90% of KIPP New Jersey students currently qualify for free or reduced meals. Job Description Elementary School Teacher KIPP New Jersey is looking for a motivated teacher with a track record of molding future leaders in our communities. You are passionate about education and understand the importance of building strong relationships in generating student achievement. You are dedicated to going above and beyond to ensure our students succeed. Here’s what you’ll be doing: Joining our schools as a teacher comes with a lot of growth opportunities, but with great power comes great responsibility. Your role as a teacher will involve a number of responsibilities which will include but are not limited to: • Create, internalize, modify and prepare lesson plans in accordance with academic curriculum, working closely with the grade level team, • Use data to responsively teach to mastery of academic skills, • Work closely with students, families and colleagues to create an environment that is supportive of student progress, • Reinforce a firm foundation for all classes and uphold classroom management techniques, • Help with diagnostic and progress monitoring testing across the school, • Monitor student progress and adjust teaching strategies to ensure all students meet the learning objectives, • Update student performance trackers and use data to help guide your lesson plans, • Participate in school, departmental and parent meetings, • Participate in school events, activities and programs both during and outside of regular class instruction hoursQualifications Skills and Mindsets • A belief in every student’s limitless potential., • A track record of success in the classroom., • Subject matter expertise., • A demonstrated interest in working with students from diverse economic and cultural backgrounds., • A collaborative attitude towards teaching and learning., • A record of exceptional student achievement and results at a high-performing charter network/charter management organization., • A belief that all students deserve a world class education which can be achieved through education reform Certification Requirements In order to be eligible for hire, all general education teaching candidates must meet the following criteria (details below): • Hold a valid teaching certification in NJ –or–, • Meet The GPA Requirement GPA Requirement • If you graduated after September 2016:, • Have a bachelor’s or master’s GPA on a conferred degree that is ≥ 3.0 –or–, • Have a bachelor’s or master’s GPA on a conferred degree that is between 2.75 and 3.0 AND demonstrate that you have passed all required Praxis exams with a +10% passing score (super scores), • If you graduated before September 2016:, • Have a bachelor’s or master’s GPA on a conferred degree that is ≥ 2.75 Additional Information KIPP NJ offers competitive salaries to newly hired lead teachers. Salaries are based on prior experience and in accordance with certification requirements. KIPP NJ offers a competitive salary range of $65,000-$103,000+ for teacher positions with additional opportunities for earning up to $7,000 annually in performance-based pay. In addition to a competitive salary, KIPP NJ offers a generous benefits package including, but not limited to, the following: • Robust benefits that include medical, dental, and vision, • Participation in the New Jersey Teachers Pension and Annuity Fund, provided appropriate teacher certification, • Optional participation in the KIPP NJ 403b retirement plan, including matching contributions, • A school-issued laptop, • Transportation benefits for TEAMmates commuting into Newark from the New York City area, • Generous Time-Off including 3.5-4 school vacation weeks (depending on the year), allocated sick and personal days, and an extended summer break, • Up to 12 weeks 100% parental leave for primary caregivers, • Employer paid life insurance, • Extensive optional ancillary benefits including, short term and long term disability and accident and hospital indemnity Our organization is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender, age, religion, national origin, citizen status, marital status, physical or mental disability, military or veteran status, sexual orientation, gender identity, or any other characteristic protected by applicable law. Our organization will make a reasonable accommodation to known physical or mental limitations of a qualified applicant or employee with a disability unless the accommodation would impose an undue hardship on the operation of the organization. No questions on this application are asked for any unlawful purpose. #LI-NJ

Job DescriptionCompany Description About KIPP New Jersey KIPP New Jersey is part of the nationally recognized “Knowledge Is Power Program” network of free, open-enrollment, college-preparatory public schools dedicated to preparing students for success in college and in life. In 2002, KIPP New Jersey first opened its doors in Newark’s South Ward as a single class of 80 fifth graders and has since grown to educate 7,035 students in grades K-12 across 18 schools in Newark, Camden, and Paterson. More than 90% of KIPP New Jersey students currently qualify for free or reduced meals. To learn more, visit www.kippnj.org. Job Description High School Lead Teacher KIPP New Jersey is looking for a motivated teacher with a track record of molding future leaders in our communities. You are passionate about education and understand the importance of building strong relationships in generating student achievement. You are dedicated to going above and beyond to ensure our students succeed. Here’s what you’ll be doing: Joining our schools as a teacher comes with the opportunity for significant growth and development, but with great power comes great responsibility. Your role as a teacher will include a number of responsibilities which will include but are not limited to: • Create, internalize, modify and prepare lesson plans in accordance with academic curriculum, working closely with the grade level team., • Use data to responsively teach to mastery of academic skills., • Work closely with students, families and colleagues to create an environment that is supportive of student progress., • Reinforce a firm foundation for all classes and uphold classroom management techniques., • Help with diagnostic and progress monitoring testing across the school, • Monitor student progress and adjust teaching strategies to ensure all students meet the learning objectives., • Update student performance trackers and use data to help guide your lesson plans., • Participate in school, departmental and parent meetings., • Participate in school events, activitiesQualifications Skills and Mindsets • A belief in every student’s limitless potential., • A track record of success in the classroom., • Subject matter expertise., • A demonstrated interest in working with students from diverse economic and cultural backgrounds., • A collaborative attitude towards teaching and learning., • A record of exceptional student achievement and results at a high-performing charter network/charter management organization., • A belief that all students deserve a world class education which can be achieved through education reform Certification Requirements In order to be eligible for hire, all general education teaching candidates must meet the following criteria (details below): • Hold a valid teaching certification in NJ –or–, • Meet The GPA Requirement GPA Requirement • If you graduated after September 2016:, • Have a bachelor’s or master’s GPA on a conferred degree that is ≥ 3.0 –or–, • Have a bachelor’s or master’s GPA on a conferred degree that is between 2.75 and 3.0 AND demonstrate that you have passed all required Praxis exams with a +10% passing score (super scores), • If you graduated before September 2016:, • Have a bachelor’s or master’s GPA on a conferred degree that is ≥ 2.75 Additional Information KIPP NJ offers competitive salaries to newly hired lead teachers. Salaries are based on prior experience and in accordance with certification requirements. KIPP NJ offers a competitive salary range of $65,000-$103,000+ for teacher positions with additional opportunities for earning up to $7,000 annually in performance-based pay. In addition to a competitive salary, KIPP NJ offers a generous benefits package including, but not limited to, the following: • Robust benefits that include medical, dental, and vision, • Participation in the New Jersey Teachers Pension and Annuity Fund, provided appropriate teacher certification, • Optional participation in the KIPP NJ 403b retirement plan, including matching contributions, • A school-issued laptop, • Transportation benefits for TEAMmates commuting into Newark from the New York City area, • Generous Time-Off including 3.5-4 school vacation weeks (depending on the year), allocated sick and personal days, and an extended summer break, • Up to 12 weeks 100% parental leave for primary caregivers, • Employer paid life insurance, • Extensive optional ancillary benefits including, short term and long term disability and accident and hospital indemnity Our organization is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender, age, religion, national origin, citizen status, marital status, physical or mental disability, military or veteran status, sexual orientation, gender identity, or any other characteristic protected by applicable law. Our organization will make a reasonable accommodation to known physical or mental limitations of a qualified applicant or employee with a disability unless the accommodation would impose an undue hardship on the operation of the organization. No questions on this application are asked for any unlawful purpose. #LI-NJ

Job DescriptionWe are looking for a skilled and reliable CARPENTER to join our team! The ideal candidate should be experienced in: • Framing., • Crown Molding., • Trim Work., • Cabinet Installation., • Decking Installation. Requirements: • Must have proven carpentry experience., • Must be bilingual in English and Spanish., • Must have a valid driver's license and reliable transportation., • Must be dependable, detail-oriented, and able to work. Independently or As Part of A Team: • Pay Based on EXPERIENCE., • Great opportunity to grow with a busy, well-established company., • Work primarily in Nutley, New Jersey. FULL-TIME POSITION. To apply, please call our office at 201-280-4122 or send your resume/work history to our email: Fsg_construction@aol.com.

Participate as a member of the APQP Project team as it relates to Molding Tooling. Participate in all ISO/QS/TS internal and external audits related to the Molding department. Assist in design and fabrication for new mold tooling and identify needed molding technologies (equipment/sensors) to advanc

Description Build your future with a small, family-owned machine shop in Kenilworth, NJ where precision manufacturing meets hands-on problem-solving on real production and prototype work.In this CNC Machine Programmer/Operator opportunity, you’ll program, set up, and optimize milling and turning o

Be a Leader of the Molding Department’s Continuous Improvement Team. Participate as a member of the APQP Project team as it relates to Molding Tooling. Participate in all ISO/QS/TS internal and external audits related to the Molding department.

Beverage Manufacturing Plant Mechanic - Irvington, NJ Maintenance Technician Mechanic Electrician Beverage Bottling Water Filtering Mixers Blenders Carbonators Automated Bottle Fillers Cappers Labelers Boxers PLCs HMIs Motors Rotary & Linear Motion Componenets Hydraulics Pneumatics _.Seeking Plant M

Assist in design and fabrication for new mold tooling and identify needed molding technologies (equipment/sensors) to advance capabilities. Scientific molding expertise: Master Molder preferred. Perform Design of Experiments (DOE) on all new tooling programs to establish the optimum molding/manufact

A precision manufacturer specializing in custom-engineered metal bellows, electroforms, and related assemblies for highly demanding applications.Serves industries such as aerospace, medical devices, and semiconductor manufacturing, with a focus on tight tolerances, reliability, and advanced fabricat

Seasonal Warehouse Worker UPS Quick Apply Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes! The steps are simple: 1) Provide some basic information to start the application process.Watch a short video to see what the job is like

PrideStaff - - Responsibilities: Load and unload trucks and incoming containers using forklift; Label, track and pack inventory using barcode systems; Prepare warehouse receipts by taking dimensions and weight of incoming cargo and photos; Maintain cleanliness and safety compliance with TSA/OSHA co

Responsibilities: Operate seated and standing forklift to transfer product from warehouse floor to load trucks; Unload and stock incoming merchandise, pick outgoing merchandise, and load outbound trailers when needed; Check, verify, and audit merchandise and enter data into remote data terminals to