Trabajos nyc retail en Madison, New JerseyCrear alertas

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE WITHIN 25-50 MILES OF THE POSTED LOCATION AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Electrical / Fire Alarm Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. This is not intended as a moonlighting position for someone whose full-time employment will take priority over AEP projects. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities Typical responsibilities may include: • Develop electrical designs from architectural backgrounds, project criteria, and direction from AEP, • Develop electrical power distribution systems, including service, feeders, panelboards, transformers, disconnects, and branch circuits, • Perform electrical load calculations and service/load assessments, • Develop power plans and equipment connections, • Develop lighting and lighting-control designs where included in project scope, • Develop emergency and egress lighting systems, • Prepare electrical riser and single-line diagrams, • Size feeders, branch circuits, overcurrent protection, and related distribution equipment, • Create panel board schedules, • Coordinate electrical requirements for mechanical, plumbing, fire-protection, architectural, and specialty equipment, • Develop fire alarm system designs, layouts, riser diagrams, device requirements, sequences, notes, and specifications, • Prepare electrical and fire alarm plans, schedules, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required What We Are Looking For We are looking for a designer, not simply a CAD operator. The ideal candidate can receive architectural backgrounds and project requirements, understand the design intent, determine what needs to be done, and independently develop a coordinated electrical and fire alarm design without requiring every receptacle, circuit, panel, feeder, fire alarm device, and note to be individually marked up. Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Does not place AEP projects on the back burner because another client becomes more urgent, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing electrical systems for buildings, • Professional experience designing fire alarm systems, • Strong AutoCAD skills, • Experience producing permit and construction-document drawing sets, • Experience with electrical load calculations and power-distribution design, • Knowledge of service sizing, feeders, panelboards, transformers, branch circuits, grounding, and overcurrent protection, • Knowledge of lighting, emergency lighting, and basic lighting-control requirements, • Working knowledge of fire alarm system design, notification, initiation, supervision, interfaces, and applicable code requirements, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred, • Working knowledge of the NEC, IBC, NFPA 72, applicable energy-code requirements, and the NYC Building and Electrical Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret the applicable code sections when asked., • Familiarity with NYC fire alarm requirements and FDNY-related requirements is strongly preferred, • PE licensure is not required for this position Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing electrical services, distribution equipment, panels, transformers, lighting, fire alarm equipment, devices, and related building conditions, • Taking field measurements, photographs, panel information, equipment information, and existing load data, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of electrical design experience do you have?, • How many years of fire alarm design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop electrical and fire alarm designs from architectural backgrounds and project criteria?, • How familiar are you with the NEC, NFPA 72, and NYC electrical/fire alarm requirements?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation?\nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE WITHIN 25 MILES OF WEST ORANGE, NJ AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Mechanical / HVAC Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. We will not consider candidates who are currently employed full-time elsewhere and are seeking side work or moonlighting opportunities. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities • Develop HVAC designs from architectural backgrounds, project criteria, and direction from AEP, • Perform heating and cooling load calculations, • Select and schedule HVAC equipment, • Develop ductwork layouts and sizing, • Develop air distribution systems, • Design ventilation and outside-air systems, • Coordinate mechanical systems with architectural, structural, electrical, plumbing, and fire-protection disciplines, • Prepare mechanical plans, schedules, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required Project Leadership / Client Coordination • Serve as the primary day-to-day technical and coordination lead for assigned projects, • Communicate directly with clients during design development and ask questions as needed, • Obtain, track, and organize required client design information and project correspondence, • Participate in client and coordination meetings, • Manage client and internal deadlines for the Mechanical, Plumbing / Fire Protection, and Electrical / Fire Alarm disciplines, • Manage assigned projects with a high degree of autonomy, with AEP copied, reviewing the work, and participating when needed What We Are Looking For Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing HVAC systems for buildings, • Strong AutoCAD/Revit skills, • Experience producing permit and construction-document drawing sets, • Working knowledge of HVAC load calculations (Trane Trace, Carrier HAP, RHVAC, etc.), • Experience with equipment selection and scheduling, • Knowledge of duct sizing, air distribution, ventilation, and basic controls coordination, • Familiarity with applicable mechanical, energy, building, and ventilation codes, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred., • Working knowledge of the IBC, IMC, ASHRAE 62.1, ASHRAE 90.1, and the NYC Building and Mechanical Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret the applicable code sections when asked., • PE licensure is not required for this position. Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing HVAC equipment, ductwork, controls, utilities, and related building conditions, • Taking field measurements, photographs, and equipment information, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD and/or Revit software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of mechanical/HVAC design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop HVAC designs from architectural backgrounds and project criteria?, • What load-calculation software do you use?, • What hours are you generally available during the workday? . Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of mechanical/HVAC design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop HVAC designs from architectural backgrounds and project criteria?, • What load-calculation software do you use?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation? \nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Job Description Join the Glowbar Team: Glowbar is reinventing the facial with custom, 30-minute treatments led by expert estheticians, designed to deliver results. Since launching in NYC in 2019, we’ve grown fast, with locations across the Northeast and more on the way. Every client who walks through our doors feels welcomed, cared for, and excited to come back and that starts with you. As a Studio Guide, you’re the heartbeat of the Glowbar experience: the first face clients see, the voice they hear on the phone, and the person who makes the whole visit feel seamless from start to finish. This is a role for someone who genuinely loves people, thrives on the energy of a great sale, and takes as much pride in a spotless studio and airtight books as they do in turning a first-time visitor into a loyal member. What You’ll Do: You’ll own the front desk and set the tone for every single visit. Every day, you’ll: Welcome every client with warmth and energy making each person feel like the most important guest in the room Drive membership and package sales by genuinely connecting clients to the Glowbar experience and the results it delivers - this is a sales focused role with real revenue targets Lock in rebooking and next appointments post-service, and manage the waitlist to keep the schedule optimized (a key driver of client retention and repeat sales) Be the voice of the studio: handling all client communication via phone, email, and text with professionalism and care Share product knowledge and at-home routine suggestions to support the client’s skincare journey, upselling and cross-selling retail products where appropriate Track and report on personal sales performance, conversion rates, and membership metrics, using feedback to continuously improve close rates Keep the studio spotless, organized, and client-ready - from the front desk to the back of house including studio laundry Share observations and solutions with management to keep the client experience and team performance improving Be the ultimate Glowbar ambassador in personality, presentation standards, and education Who We’re Looking For: 1+ years of hospitality experience and/or sales experience (restaurant, hotel, salon/spa, or comparable) with a proven track record of superior client service and meeting/exceeding sales goals Genuine passion for people, hospitality, and creating memorable experiences Confidence in sales conversations, comfort with commission-based earning, and a strong drive to meet and exceed membership sales targets Demonstrated ability to close sales, handle objections, and convert prospects into loyal, recurring members A warm, professional presence and a hospitality-first mindset Flexible availability, including weekends (we’re busiest when clients have time to glow) Full-Time: 5-day open availability, including both weekend days Part-Time: 3-day open availability, including one weekend day Weekend Only: Saturday & Sunday every week Enthusiasm for beauty, skincare, and a fast-paced, target-driven environment Your Glow Package (Compensation & Benefits): Uncapped commission: earn up to $15 per membership and $10 per package sold 2% annual compensation increase eligibility Medical, dental, and vision insurance largely covered by Glowbar for Full-Time team members 40 hours of vacation for Full-Time team members + sick leave for all team members Holiday pay at 1.5x for any of the 6 company holidays Access to DailyPay platform - access part of your paycheck before payday at no cost Disability, accident, critical illness, and life insurance coverage Employee Assistance Program (EAP) with free mental wellness support Commuter benefits to help save on transit and parking Free annual Glowbar membership ($780 value) and two annual guest passes ($170 value) 25% employee discount off skincare products $150 employee referral bonuses for bringing great people to the team $15 product credit for every first-time client you refer Working Conditions: Our studios are energetic, on-your-feet environments. You should be comfortable with: Standing, walking, and moving throughout your full shift Bending, reaching, and lifting up to 15 lbs (supplies, laundry, merchandise) Stairs, varying temperatures, and the occasional humidity of a laundry room Evening, weekend, and holiday availability to meet client demand

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE WITHIN 25-50 MILES OF THE POSTED LOCATION AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Plumbing / Fire Protection / Sprinkler Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. This is not intended as a moonlighting position for someone whose full-time employment will take priority over AEP projects. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities Typical responsibilities may include: • Develop plumbing and fire-protection designs from architectural backgrounds, project criteria, and direction from AEP, • Develop domestic cold- and hot-water distribution systems, • Develop sanitary waste and vent systems, • Develop storm-drainage systems where applicable, • Develop natural-gas distribution systems where applicable, • Perform plumbing fixture-unit, water-demand, sanitary, storm, and gas-load calculations, • Size piping and related plumbing-system components, • Design domestic water-heating systems and select equipment, • Develop plumbing riser diagrams and schematics, • Coordinate plumbing requirements for architectural, mechanical, electrical, kitchen, specialty, and other equipment, • Develop fire-protection and sprinkler-system layouts where included in the project scope, • Determine applicable sprinkler design criteria, hazard classifications, design densities, coverage requirements, and system requirements, • Develop sprinkler head layouts, piping arrangements, risers, standpipes, and related fire-protection systems as applicable, • Develop fire-protection performance criteria and coordinated design drawings for delegated-design sprinkler systems where appropriate, • Perform or assist with sprinkler hydraulic calculations where required, • Review available water-supply information and identify when additional flow-test or utility information is required, • Coordinate fire-protection systems with architectural, structural, mechanical, electrical, fire alarm, and plumbing disciplines, • Prepare plumbing and fire-protection plans, schedules, risers, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required What We Are Looking For We are looking for a designer, not simply a CAD operator. The ideal candidate can receive architectural backgrounds and project requirements, understand the design intent, determine what needs to be done, and independently develop coordinated plumbing and fire-protection designs without requiring every pipe, fixture connection, valve, sprinkler head, riser, and note to be individually marked up. Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Does not place AEP projects on the back burner because another client becomes more urgent, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing plumbing systems for buildings, • Professional experience with fire-protection and sprinkler-system design, • Strong AutoCAD skills, • Experience producing permit and construction-document drawing sets, • Knowledge of domestic water, sanitary, vent, storm, natural gas, and domestic water-heating systems, • Experience performing plumbing sizing and demand calculations, • Working knowledge of sprinkler-system design, hazard classifications, densities, sprinkler coverage requirements, piping arrangements, and hydraulic principles, • Familiarity with standpipe systems and fire-service requirements where applicable, • Ability to distinguish between engineer-of-record design requirements and delegated sprinkler-contractor design responsibilities, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred, • Working knowledge of the IBC, IPC, applicable fuel-gas codes, NFPA 13, NFPA 13R, NFPA 14, and the NYC Building and Plumbing Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret applicable code requirements when asked., • Familiarity with NYC fire-protection requirements and FDNY-related requirements is strongly preferred, • PE licensure is not required for this position Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing plumbing fixtures, piping, water services, sanitary and storm systems, gas services, sprinkler systems, standpipes, fire services, and related building conditions, • Taking field measurements, photographs, pipe-size information, equipment information, and utility information, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of plumbing design experience do you have?, • How many years of fire-protection/sprinkler design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop plumbing designs from architectural backgrounds and project criteria?, • Are you able to independently develop sprinkler layouts and fire-protection design criteria?, • Do you perform sprinkler hydraulic calculations yourself?, • How familiar are you with NFPA 13, NFPA 13R, NFPA 14, and NYC plumbing/fire-protection requirements?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation?\nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Job DescriptionEssential Duties and Responsibilities: • Offers friendly service to all guests, • Takes customer orders, maintains fast, accurate service, and positive guest relations, • Operates grill and in an efficient and safe manner, • Ensures company standards on equipment, facility, and grounds are maintained, • Ensures food quality and 100% customer satisfaction, • Maintains the restaurant with regards to cleanliness, neatness and customer accessibility, • Uses the company cash register accurately and maintain proper control of company assets, • Works as a team member to support other restaurant employees in their duties, • Receive payments by cash, credit or debit cards, and gift cards, • Issue receipts, refunds, or change due, • Assist customers by providing menu information and resolving their complaints or concerns, • Readily identify prices of menu items and calculate bill using POS, • Enthusiastically greet customers entering restaurant, • Answer customers’ questions and provide information of store’s policies and relevant procedures about the preparation or cooking process, • Maintain a clean and orderly register area, • Mix Milkshakes and other beverages as necessary, • Complete other general cleaning duties such as emptying trash cans and cleaning dining area, • Stock and maintain fountain machine, • Ensures food quality at all times, • Other duties and responsibilities as assigned by your supervisor Qualifications - Knowledge, Skills and Abilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Education/Experience: Successful Candidates/Employees of this position must have a High School Diploma or GED. In addition, 1 year of experience in either a food service or retail environment is also preferred. Experience in providing customer service and a desire to grow in the food industry is strongly preferred. You must have a very hands on work style and be actively involved in all daily functions of the store., • Certifications: A NYC Food Handlers License is not required to be considered for this position but is preferred., • Language Ability: Good communication and interpersonal skills are required. The ability to read and comprehend simple instructions, short correspondences, and memos is necessary. The position also requires the ability to write simple correspondences and the ability to effectively communicate with co-workers and customers. This position requires that you are able to convey information effectively and accurately, vocalize clearly and loudly enough to be heard in a noisy environment and proficiently speak, read, and write the English language., • Math Ability: The position requires the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals knowledge of simple math and its application to receiving and disbursing cash., • Reasoning Ability: The position requires the ability to solve practical problems and deal with a variety of situations and people. You will need the ability to apply general rules of the job to successfully solve problems that may occur without involving the manager. Strong analytical and decision-making skills are needed., • Computer Skills: Must be able to operate cash register., • Physical Demands: The position’s physical demands require work in a restaurant/kitchen environment with moderate to loud noise levels, varying temperature conditions and possible direct exposure to hazardous substances, such as hot oil. While performing the duties of the job, the employee is regularly required to sit, stand, travel and react quickly to deadlines, sometimes with little notice. The employee is often required to stand for long periods; walk, bend, kneel, and reach with hands boxes or food containers typically weighing 50 pounds or less, without restrictions. May be required to use stepladder. Finger dexterity is required for use of cash register. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Must be able to travel as needed., • Hospitality: Actively look for ways to help customers, provide as much information as requested. Infer possible customer needs, as it may be their first experience at the restaurant. Knowledge of, quality standards of service, store policies regarding customer interaction, assessment of customer needs and customer satisfaction are all necessary., • Active Listening: Give full attention to what customers are saying, be able to listen to and process the customers’ order without losing track., • Social Perceptiveness: Be aware of customers’ reactions, both verbal and nonverbal, and understand why they are reacting this way. Understand the boundaries of appropriateness.

Follow Project or Product Management methodology managing tasks and activities within the team displaying flexibility with either Agile, Waterfall methodologies or a hybrid. Be the main point of contact for larger IT organization, including Retail IT, Infrastructure, Security, Digital and Governance

Job DescriptionEssential Duties and Responsibilities: • Offers friendly service to all guests, • Takes customer orders, maintains fast, accurate service, and positive guest relations, • Operates grill and in an efficient and safe manner, • Ensures company standards on equipment, facility, and grounds are maintained, • Ensures food quality and 100% customer satisfaction, • Maintains the restaurant with regards to cleanliness, neatness and customer accessibility, • Uses the company cash register accurately and maintain proper control of company assets, • Works as a team member to support other restaurant employees in their duties, • Receive payments by cash, credit or debit cards, and gift cards, • Issue receipts, refunds, or change due, • Assist customers by providing menu information and resolving their complaints or concerns, • Readily identify prices of menu items and calculate bill using POS, • Enthusiastically greet customers entering restaurant, • Answer customers’ questions and provide information of store’s policies and relevant procedures about the preparation or cooking process, • Maintain a clean and orderly register area, • Mix Milkshakes and other beverages as necessary, • Complete other general cleaning duties such as emptying trash cans and cleaning dining area, • Stock and maintain fountain machine, • Ensures food quality at all times, • Other duties and responsibilities as assigned by your supervisor Qualifications - Knowledge, Skills and Abilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Education/Experience: Successful Candidates/Employees of this position must have a High School Diploma or GED. In addition, 1 year of experience in either a food service or retail environment is also preferred. Experience in providing customer service and a desire to grow in the food industry is strongly preferred. You must have a very hands on work style and be actively involved in all daily functions of the store., • Certifications: A NYC Food Handlers License is not required to be considered for this position but is preferred., • Language Ability: Good communication and interpersonal skills are required. The ability to read and comprehend simple instructions, short correspondences, and memos is necessary. The position also requires the ability to write simple correspondences and the ability to effectively communicate with co-workers and customers. This position requires that you are able to convey information effectively and accurately, vocalize clearly and loudly enough to be heard in a noisy environment and proficiently speak, read, and write the English language., • Math Ability: The position requires the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals knowledge of simple math and its application to receiving and disbursing cash., • Reasoning Ability: The position requires the ability to solve practical problems and deal with a variety of situations and people. You will need the ability to apply general rules of the job to successfully solve problems that may occur without involving the manager. Strong analytical and decision-making skills are needed., • Computer Skills: Must be able to operate cash register., • Physical Demands: The position’s physical demands require work in a restaurant/kitchen environment with moderate to loud noise levels, varying temperature conditions and possible direct exposure to hazardous substances, such as hot oil. While performing the duties of the job, the employee is regularly required to sit, stand, travel and react quickly to deadlines, sometimes with little notice. The employee is often required to stand for long periods; walk, bend, kneel, and reach with hands boxes or food containers typically weighing 50 pounds or less, without restrictions. May be required to use stepladder. Finger dexterity is required for use of cash register. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Must be able to travel as needed., • Hospitality: Actively look for ways to help customers, provide as much information as requested. Infer possible customer needs, as it may be their first experience at the restaurant. Knowledge of, quality standards of service, store policies regarding customer interaction, assessment of customer needs and customer satisfaction are all necessary., • Active Listening: Give full attention to what customers are saying, be able to listen to and process the customers’ order without losing track., • Social Perceptiveness: Be aware of customers’ reactions, both verbal and nonverbal, and understand why they are reacting this way. Understand the boundaries of appropriateness.

Experience in retail business fundamentals: department sales trends, inventory management, and process efficiency and improvement.

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

Provide efficient and courteous service to customers at all times including asking customers to the check-out.NEVER sign off the register with a customer waiting.Always wait until someone comes to relieve you.Scan and ring customer orders according to company policy including store productivity stan

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

Starting Hourly Rate / Salario por Hora Inicial: $19.Working at Target means helping all families discover the joy of everyday life.We bring that vision to life through our values and culture.You can work as much or as little as you like as.This role is ideal for those that are looking for a persona

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

The United States Probation Department for the Eastern District of New York is accepting applications for an experienced full-time Systems Administrator/IT Security Officer.Duties include systems administration implementing security/critical patches remediating vulnerabilities deploying hardware and

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

Stock all merchandise in its proper location according to shelf allocation established by management.Provide efficient and courteous service to customers at all times.Replace misplaced items to the proper location.Sweep and mop all areas of store.Check the shelf label of each item to ensure pricing

Join Allied Universal as an Unarmed Security Officer at a retail location where you will monitor and patrol assigned areas maintain a visible presence to help deter incidents and support a welcoming environment for customers and team members. Conduct regular and random patrols throughout the retail

No experience necessary! If you have retail food service or hospitality industry background you are a great fit for this role; if not we will provide you with the training and everything you need for a great introduction to a career in the security industry.

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

From retail merchandising tosales and marketing insights our team makes sure the brands we represent look great sell strong and stay competitive at every major U. Acosta Groupa collective of the industrys most trusted retail marketing and foodservice agencies reimagining how people connect with bran

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

Stock all merchandise in its proper location according to shelf allocation established by management.Provide efficient and courteous service to customers at all times.Replace misplaced items to the proper location.Sweep and mop all areas of store.Check the shelf label of each item to ensure pricing

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

Promote and maintain efficient and courteous service to customers at all times.Supervise and monitor the front-end managers computer room operators cashier courtesy clerks and Gas-n-Go.Coordinate pickup lanes and maintain security of safe and change fund and oversee safe counts and the weekly safe r

Provide customer service to visitors customers and employees by carrying out site-specific procedures access-control practices and security-related activities at a retail banking location.

Independent Industrial Lubrication Consultant (1099).Unlimited Commission • Flexible Territory • Residual Income Potential.If you're the kind of salesperson who would rather build a business than punch a time clock, this opportunity may be exactly what you're looking for.Schaeffer Manufacturing

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

We empower our audience with comprehensive legal resources through our public and private online portals and FindLaw publications.Our platforms offer engaging, relevant, and credible legal information, personalized tools, and access to professional legal communities.Our mission is to help attorneys

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

What Makes Stephen Gould Exceptional.Founded through a passion for entrepreneurship, our success is due to the ingenuity and tenacity of our extraordinary teams, bringing people and ideas together.With Stephen Gould, everything is within reach, including an exciting career opportunity.We want you to

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

Auris is the payroll and HR partner built for small and medium-sized businesses who can’t afford to get it wrong.Trusted by over 50,000 businesses nationwide, Auris pairs easy-to-use technology with real human services to give leaders the confidence that every detail is done right - so they can fo

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

Connections Personnel is hiring for a temp to hire Inside Sales Representative for our client located in Berkeley Heights, NJ.Looking for a motivated, results driven candidate with experience selling material handling equipment, industrial products or warehouse solutions to join the team.This role i

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

Sell comprehensive apparel programs including uniforms, training gear, teamwear, fanwear, retail opportunities, and team stores.

Allied Universal North Americas leading security and facility services company offers rewarding careers that provide you a sense of purpose.While working in a dynamic welcoming and collaborative workplace you will be part of a team that contributes to a culture that positively impacts the communitie

Previous sales, customer service, or retail experience is a plus, but.

OTE: $80,000–$125,000+ | Uncapped Commission.Diaza Sportswear is building a global sports brand serving teams, clubs, academies, schools, universities, leagues, professional organizations, and sports programs across multiple markets.Our business goes beyond selling jerseys.We build complete appare

The Inside Sales Representative will focus on securing qualified appointments in partnership with Asembia’s National Account Director.Job Scope and Major Responsibilities:.Perform daily business prospective account outbound calls.Record and track all prospective and existing account contact inform

We are one of the nation’s leading distributors of public safety equipment and PPE, serving fire departments, law enforcement, EMS, and government agencies across the United States.We are launching a new pilot program designed for highly motivated sales professionals who want the freedom of an ent

Actalent connects passion with purpose.We’re looking for a highly motivated.Building trusted relationships with our network of engineering and sciences companies under our Actalent brand, or corporate companies under our Aston Carter brand, is a key part of our company strategy.If you’re enthusi

Legal Intake Specialist / Receptionist.Up to $70k base, depending on experience.We’re partnered with a well-established law firm in.Legal Intake Specialist / Receptionist.This is a highly client-facing role combining.Sales Development Representative (SDR) responsibilities, and front-desk/reception