Trabajos office technician en Elizabeth, New JerseyCrear alertas

Job Description Position Overview We are currently seeking a skilled HVAC Technician with strong commercial experience to join our growing team. In this role, you will be responsible for the installation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and refrigeration systems in commercial buildings. The ideal candidate is reliable, safety-focused, and has hands-on experience with a variety of HVAC systems used in office buildings, retail spaces, schools, and other commercial facilities. Key Responsibilities Install, inspect, and repair commercial HVAC systems, including rooftop units, split systems, chillers, boilers, VAV systems, and ductwork. Perform preventative maintenance tasks according to established schedules and equipment specifications. Diagnose and troubleshoot mechanical and electrical issues in HVAC systems. Ensure all work complies with local, state, and federal codes, as well as company and safety standards. Maintain accurate service records, work orders, and equipment documentation. Communicate effectively with clients, supervisors, and other team members regarding service updates and repair recommendations. Assist in startup and commissioning of new systems and equipment. Respond to emergency service calls in a timely and professional manner. Maintain tools, equipment, and company vehicles in safe and proper working condition. Qualifications High school diploma or GED required; technical or trade school certification in HVAC is preferred. 3+ years of experience as an HVAC technician in commercial environments. EPA Section 608 Certification required. Valid driver's license with a clean driving record. Strong knowledge of HVAC systems, controls, refrigeration cycles, and associated components. Ability to read and interpret blueprints, technical diagrams, and service manuals. Familiarity with digital HVAC tools and software is a plus. Excellent troubleshooting skills and attention to detail. Ability to work independently and as part of a team in a fast-paced environment. Must be able to lift up to 50 lbs, work at heights, and in confined spaces when needed. Benefits Competitive hourly wage based on experience Health, dental, and vision insurance 401(k) with company match Paid time off and holidays Opportunities for training, certifications, and career advancement Company vehicle and tools provided (where applicable)

Job DescriptionLocation: Union, NJ 07083 Date Posted: 09/01/2026 Category: Center Based Education: High School Diploma/GED Great Compensation $20/hr, Benefits, PTO and potential for career growth! Join us in Creating a Colorful Beginning! At KFSABA we value innovation, creativity, and the power of applied behavior analysis therapy for children with autism. Position DescriptionWe are seeking compassionate people to work as Behavioral Technicians (BTs), and Registered Behavior Technicians (RBTs) to provide direct treatment and ABA therapy. Under the supervision of a BCBA clinician, the BT is responsible for working one-on-one with children carrying out their individualized treatment plans. Key Benefits and Advantages (Based on schedule) > Highly competitive compensation based on your education and experience> Medical, Dental, and Vision Insurance> Disability and Life Insurance, 401k, and other voluntary benefits> 8 Paid Holidays + 16 PTO Days (6 sick, 10 vacation) > 401K match > Weekly Pay> Work with a committed agency with over a 20-year track record of service> 40-hour RBT course providedFacility and Hours> Center-based opportunities> Various schedules availableRequired Experience and Education> Minimum of a HS Diploma or GED> Minimum of 6 months to 1 year of experience with children (ABA preferred)> Ability to work independently as well as in a team environment> It is an essential function to be able to meet the rigorous demands of the job, which may include: long periods of standing, sitting, following, pushing/pulling equipment, lifting, bending, kneeling, crouching, crawling, and engaging with children on the floor or standing for long periods. About UsKaleidoscope ABA has been in business for over 20 years and has 29 locations across the country. Join a growing team looking to make a difference in the lives of children! Kaleidoscope ABA Therapy Services is an equal opportunity employer. Title: Behavioral Technician Class: Behavioral Therapist Type: TEMPORARY Ref. No.: 1290698-24 BC: #KFS204 Company: Kaleidoscope ABA Contract Contact: Union Careers Office Email: Recruit@kfsaba.org Office Phone: 877-ABA-0399 Office Address: 2780 Morris Avenue, Union, NJ About Us: Responding to this post or registering on the KFSABA.org website is for information transfer only and is not an application, employment offer or commitment. When and if opportunities are presented, you may accept or decline such opportunities at your sole discretion. Further steps are required to complete your registration with the Kaleidoscope Family Solutions ABA, Inc. dba Kaleidoscope ABA. We appreciate your interest in our agency and look forward to meeting with you.

Job DescriptionLocation: Union, NJ 07083 Date Posted: 08/01/2026 Category: Center Based Education: High School Diploma/GED Great Compensation $20/hr, Benefits, PTO and potential for career growth! Join us in Creating a Colorful Beginning! At KFSABA we value innovation, creativity, and the power of applied behavior analysis therapy for children with autism. Position DescriptionWe are seeking compassionate people to work as Behavioral Technicians (BTs), and Registered Behavior Technicians (RBTs) to provide direct treatment and ABA therapy. Under the supervision of a BCBA clinician, the BT is responsible for working one-on-one with children carrying out their individualized treatment plans. Key Benefits and Advantages (Based on schedule) > Highly competitive compensation based on your education and experience> Medical, Dental, and Vision Insurance> Disability and Life Insurance, 401k, and other voluntary benefits> 8 Paid Holidays + 16 PTO Days (6 sick, 10 vacation) > 401K match > Weekly Pay> Work with a committed agency with over a 20-year track record of service> 40-hour RBT course providedFacility and Hours> Center-based opportunities> Various schedules availableRequired Experience and Education> Minimum of a HS Diploma or GED> Minimum of 6 months to 1 year of experience with children (ABA preferred)> Ability to work independently as well as in a team environment> It is an essential function to be able to meet the rigorous demands of the job, which may include: long periods of standing, sitting, following, pushing/pulling equipment, lifting, bending, kneeling, crouching, crawling, and engaging with children on the floor or standing for long periods. About UsKaleidoscope ABA has been in business for over 20 years and has 29 locations across the country. Join a growing team looking to make a difference in the lives of children! Kaleidoscope ABA Therapy Services is an equal opportunity employer. Title: Behavior Technician Class: Behavioral Therapist Type: PERMANENT ONLY Ref. No.: 1306272-9 BC: #KES303 Company: Kaleidoscope Education Solutions Contract Contact: Contract Submit NJ Office Email: BM@kesgroup.net Office Phone: 888-829-2477 Office Address: 1460 Route 9 North Suite 300, Woodbridge NJ 07095 About Us: Kaleidoscope Education Solutions is a referral agency for professionals seeking supplemental K12 education marketplace opportunities. Registering with Kaleidoscope Education Solutions is not a guarantee that opportunities will be available and/or located. All professionals contracting through Kaleidoscope Education Solutions are classified and compensated as self-employed independent contractors.

HPC Industrial, powered by Clean Harbors, in Linden, New Jersey is looking for a LDAR Technician to join their safety conscious team! The LDAR Monitoring Technician, using an analyzer and electronic data recorder, is responsible for accurately monitoring components on an assigned route within an industrial facility. The Monitoring Technician is also responsible for calibrating equipment to ensure optimum performance of the analyzer, as well as identifying leads and process leak tags. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our #1 priority and we live it 3-6-5! Competitive wages Comprehensive health benefits coverage after 30 days of full-time employment Group 401K with company matching component Own part of the company with our Employee Stock Purchase Plan Opportunities for growth and development for all the stages of your career Generous paid time off, company paid training and tuition reimbursement Positive and safe work environments RESPONSIBILITIES Key Responsibilities: Demonstrates initiative, planning work and carrying out tasks without detailed instructions; makes constructive suggestions; prepares for problems or opportunities in advance and undertakes additional responsibilities; Must possess the ability to use a portable analyzer and electronic data collector; Ability to analyze data, evaluate situations and identify problems or opportunities, including likely causes; Demonstrates concern for meeting internal and external customers' needs in a manner that provides satisfaction for the customer within the resources that can be made available; Ability to adapt quickly to change and be open to considering new approaches to solving problems and work processes; Ability to develop factual, logical courses of action, considering resources, constraints and company values; Responsible for monitoring components in an industrial environment to detect emissions from process equipment; Performs monitoring activities for an assigned route within a prescribed period of time, ensuring all components are accurately monitored and reported; Responsible for calibrating equipment to ensure optimum performance. Makes minor mechanical adjustments when situations arise; Identifies leaks and processes leak tags; Completes daily upload of monitoring activity to the customer database and completes daily emissions monitoring reports– must have basic computer knowledge; Communicate daily equipment changes with office personnel; Communicate/Coordinate with plant personnel; Performs other duties as assigned. QUALIFICATIONS Required Qualifications: Strong communication (written, verbal and listening) and interpersonal skills; Prior experience in chemical plants or refineries is helpful, but not necessary; Must be willing/able to work at moderate to high levels of physical exertion for extended periods; Must be willing/able to work in inclement weather conditions (extreme heat/cold); Must be willing to work extended hours and weekends when necessary; Mechanical aptitude and problem-solving abilities a plus. What does it take to work for HPC-Industrial? High school diploma/GED or equivalent experience Valid TWIC required or ability to obtain TWIC. About HPC-Industrial HPC-Industrial, a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. HPC-Industrial is an equal opportunity employer. HPC-Industrial is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ect@cleanharbors.com or 1-844-922-5547. HPC-Industrial is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *HPC

Job Description Lightning Mechanical LLC is seeking an experienced Commercial HVAC Service Technician to join our team in Maplewood, New Jersey. We provide commercial and industrial HVAC service, maintenance, repair, replacement, and installation throughout New Jersey and the New York metropolitan area. Our technicians work on a wide range of equipment, including VRV and VRF systems, rooftop units, split systems, heat pumps, boilers, pumps, motors, cooling towers, ventilation systems, controls, and related mechanical equipment. Lightning Mechanical also provides factory-trained service for Daikin VRV and Applied systems and supports many other major HVAC manufacturers. Responsibilities: • Diagnose and repair commercial HVAC equipment, • Perform preventive maintenance and equipment inspections, • Troubleshoot electrical, mechanical, refrigerant, and control-system issues, • Service VRV and VRF systems, rooftop units, split systems, heat pumps, boilers, pumps, motors, and cooling towers, • Replace compressors, motors, controls, valves, sensors, and other components, • Perform refrigerant recovery, evacuation, charging, and leak testing, • Complete service reports clearly and accurately, • Communicate findings, repair recommendations, and equipment conditions to customers and office staff, • Identify root causes instead of only addressing immediate symptoms, • Maintain company tools, vehicles, parts, and equipment, • Follow company safety procedures and applicable codes, • Participate in the on-call rotation for emergency service, • Travel to customer locations throughout New Jersey and the New York metropolitan area Qualifications: • At least 5 years of commercial HVAC service experience preferred, • Strong troubleshooting and diagnostic ability, • Experience working on commercial HVAC equipment and controls, • Knowledge of refrigeration cycles, electrical systems, airflow, hydronic systems, and mechanical components, • EPA Section 608 certification required, • Valid driver’s license and acceptable driving record, • Ability to work independently and complete service documentation accurately, • Ability to lift equipment, climb ladders, work on rooftops, and perform the physical duties of the position, • Strong communication and customer-service skills, • Daikin VRV, VRF, chiller, boiler, controls, or manufacturer training is strongly preferred, • Factory training and additional HVAC certifications are a plus What We Offer: • Full-time, year-round employment, • Competitive compensation based on experience, • Medical, dental, vision, retirement, life insurance, and paid time off, if applicable to this position, • Company vehicle and service tools, if applicable, • Ongoing technical and manufacturer training, • Opportunity to work on advanced commercial systems and mission-critical facilities, • Established company with in-house service, installation, piping, and sheet-metal capabilities, • Opportunity for advancement based on performance and technical ability Lightning Mechanical serves commercial properties, medical facilities, data centers, multi-tenant buildings, and other complex environments. Our technicians are supported by experienced office and field teams, specialized diagnostic equipment, and access to parts and factory resources. Lightning Mechanical LLC is an equal opportunity employer. For the one-line company pitch, keep the same one already entered because it applies to both jobs. \nCompany Description Lightning Mechanical LLC is an established commercial HVAC contractor based in Maplewood, New Jersey. We provide service, maintenance, repair, replacement, and installation for commercial and industrial HVAC systems throughout New Jersey and the New York metropolitan area. Our work includes VRV and VRF systems, boilers, pumps, cooling towers, ductwork, piping, controls, and in-house sheet metal fabrication. We serve commercial properties, medical facilities, data centers, multi-tenant buildings, and other mission-critical environments. Lightning Mechanical LLC is an established commercial HVAC contractor based in Maplewood, New Jersey. We provide service, maintenance, repair, replacement, and installation for commercial and industrial HVAC systems throughout New Jersey and the New York metropolitan area. Our work includes VRV and VRF systems, boilers, pumps, cooling towers, ductwork, piping, controls, and in-house sheet metal fabrication. We serve commercial properties, medical facilities, data centers, multi-tenant buildings, and other mission-critical environments.

Surgery-Focused DVM Opportunity – Newark, NJ (Profit-share & ownership upside!) Key Highlights • Full-service small animal hospital in Newark, NJ, roughly 20 minutes from Manhattan, • Surgery-focused role with a proven, high-volume reproductive and C-section caseload, • Long-term case mix of about 60% surgery and 40% general practice, • Profit-sharing model with realistic earning potential of $300,000+ and higher in exceptional years, • Flexible scheduling, part-time or full-time, built around you, • Experienced technician team, with the option to add support staff as you grow, • Clear path toward founding doctor and leadership roles as the group expands across New Jersey, • Hands-on ownership that understands the day-to-day realities of clinical practice About You • DVM or equivalent degree that allows you to practice veterinary medicine in the US, • Hold, or are eligible for, licensure in New Jersey, • Confident and experienced with C-sections and cherry eye corrections, plus routine soft tissue surgery and dentals, • Motivated by surgery and energized by a high-volume, high-reward environment, • Comfortable working in a small, growing, entrepreneurial practice, • Strong communicator who enjoys collaborating with the wider team Benefits • Highly competive base salary up to $180,000, • Profit-sharing model with strong earning potential well beyond $250k+, • Healthcare stipend, • CE support and conference funding, • Flexible, accommodating time off, • 401(k) can be arranged, • Relocation and sign-on support open to discussion, • Potential founding doctor and ownership-style opportunities in future locations More about this opportunity We are partnering with a recently relaunched, privately-owned, surgery-focused small animal hospital in Newark, NJ that is rebuilding its clinical team and looking to welcome an Associate Veterinarian. Backed by a leadership team that blends strong financial expertise with hands-on veterinary operations experience, this is an entrepreneurial, growth-minded practice with real momentum behind it. The clinic combines busy general practice, covering wellness, preventive care, dermatology, and dentistry, with a high-volume surgical caseload that includes C-sections, cherry eye corrections, spays and neuters, and mass removals. The long-term model is built around two veterinarians, one leaning toward surgery and one toward appointments, with plenty of room to mix the two around your interests. What makes this role stand out is the upside. You can choose a compensation model that suits you, whether that is a higher base or a lower base paired with meaningful profit-sharing (worth upwards of $300k!) and genuine ownership potential. As the group expands to additional New Jersey locations, there will be founding-doctor opportunities for those who want them. The culture is flexible, collaborative, and supportive, with cross-trained technicians, individualized scheduling, open PTO, and a Fear Free approach for pets, owners, and staff alike. Whether you value stability or you are excited by the chance to help build something and share in its success, this team will shape the role around you. Next Steps If you are interested, hit “Apply” or, for a confidential chat to find out more, simply email ben@atlasconsultancygroup.com or call the office at (980) 202 4966. INDBR

Job Description We are currently seeking an Electronic Assembler. Creating automation systems for ships around the world. You can grow from this position with training to a field repair technician to support the systems you assemble and a much higher pay if you choose to do so. Responsibilities: • Install and test electrical equipment and fixtures, • Install various types of raceway and cable tray systems, • Wire connectors, plugs and switches, • Make wire harnesses, • Crimp and lug wire ends., • Point to point wiring with in enclosures and consoles, • Perform routine maintenance on electrical wiring and systems, • Adhere to all quality and safety codes Qualifications: • Previous experience in electrical engineering or other related fields, • Familiarity with electrical schematics, blueprints, and manuals, • Familiarity with electrical equipment and hand tools, • Strong problem solving and critical thinking skills\nCompany Description We are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ and Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it. We are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ\r\nand Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it.

Executive MAC Technician (MAC Specialist) Contract for 1 year with possible extension Onsite in Jersey City, NJ Executive MAC Technician Job Description: The Technology Department develops and supports a wide range of IT solutions in support of the Agency's mission. Under the management of the Assistant Director, Customer Service and Web Service, the Executive MAC Technician will serve as the primary technology advisor and support specialist for the Authority's Executive Leadership Team, providing high-touch, white-glove support exclusively within the Apple ecosystem. This is a highly visible, client-facing role requiring exceptional technical expertise in macOS, iOS, and Apple enterprise technologies, along with outstanding interpersonal skills to effectively serve C-level executives and their support staff. The Executive MAC Technician will be responsible for end-to-end management of all Apple technology deployments, troubleshooting, strategic consulting, and maintaining the highest standards of service delivery to ensure executives can maximize productivity with minimal technology disruption. Responsibilities: • Serve as the primary point of contact and technology advisor for all Apple/MAC ecosystem matters for Executive Leadership, providing proactive, anticipatory support that exceeds expectations., • Provide expert troubleshooting and resolution of macOS, iOS, iPadOS hardware and software issues for Executive Leadership at primary offices, remote locations, and during travel, ensuring minimal downtime and maximum productivity., • Perform installation, configuration, and optimization of MacBook Pro/Air, iMac, Mac mini, Mac Studio, iPhone, iPad, Apple Watch, and all Apple peripherals including monitors, keyboards, mice, trackpads, AirPods, and HomePods., • Manage and coordinate seamless updates of macOS, iOS, iPadOS, and all Apple applications, ensuring minimal disruption while maintaining security compliance and optimal performance., • Serve as the strategic liaison between Executive Leadership and the IT Service Desk, system administration, network support, cybersecurity, architecture, and engineering teams, translating executive needs into technical requirements., • Supervise and mentor backup support technicians, ensuring consistent service quality and knowledge transfer across the executive support team., • Complete comprehensive daily checklists of proactive support tasks including system health checks, pending update reviews, and anticipatory maintenance to prevent issues before they impact executives., • Serve as a trusted technology consultant and subject matter expert, providing guidance on Apple ecosystem capabilities, device selection, workflow optimization, accessibility features, and emerging Apple technologies that could enhance executive productivity., • Provide on-site and remote support for executive presentations, board meetings, and high-stakes events, ensuring flawless technology performance using Apple devices, AirPlay, Apple TV, Keynote, and other presentation tools., • Design and implement executive technology solutions that seamlessly integrate with the Authority's enterprise infrastructure while leveraging Apple's ecosystem advantages including Continuity, Handoff, Universal Clipboard, AirDrop, and iCloud services., • Ensure all Apple technology solutions align with the Authority's hardware and software standards, security policies, data governance requirements, and regulatory compliance obligations., • Maintain detailed documentation and tracking of all executive Apple devices, configurations, third-party applications, and support incidents using ServiceNow ITSM platform., • Provide support across primary office locations, remote/hybrid work environments, and travel scenarios, maintaining consistent service quality regardless of location or circumstances., • Manage Apple Business Manager, Device Enrollment Program (DEP), Volume Purchase Program (VPP), and Mobile Device Management (MDM) solutions for executive device fleet., • Coordinate with Apple Business Support and AppleCare for Enterprise to expedite hardware repairs, replacements, and obtain expert-level technical assistance when needed. Required Qualifications: Technical Skills • Expert-level proficiency in macOS (current and previous 3 versions), including advanced system administration, Terminal/command line operations, system optimization, and troubleshooting., • Advanced knowledge of iOS and iPadOS, including configuration profiles, restrictions, and enterprise features., • Deep expertise with Apple hardware architecture, diagnostics, and repair procedures for all Mac computers and iOS devices., • Extensive experience with Apple enterprise management tools including Apple Business Manager, Device Enrollment Program (DEP), Volume Purchase Program (VPP), and MDM solutions (Jamf Pro, Intune, Workspace ONE, or similar)., • Proficiency with Apple Professional Applications including Final Cut Pro, Logic Pro, Motion, Compressor (preferred but not required)., • Advanced knowledge of iWork suite (Pages, Numbers, Keynote) and iCloud services for business use., • Expert-level proficiency in Microsoft 365 for Mac including Outlook, Excel, PowerPoint, Word, Teams, and OneDrive integration with macOS., • Strong knowledge of cross-platform integration between macOS and Windows environments, including Active Directory binding, SMB file sharing, and authentication., • Experience with enterprise collaboration platforms on Mac including Microsoft Teams, Zoom, WebEx, Slack, and their macOS-specific features and optimizations., • Proficiency with Apple security features including FileVault encryption, Gatekeeper, System Integrity Protection (SIP), Secure Boot, Touch ID, Face ID, and Keychain management., • Working knowledge of macOS networking including WiFi troubleshooting, VPN configuration, network diagnostics, AirDrop, and AirPlay., • Experience with ServiceNow ITSM platform for incident tracking, knowledge management, and executive support workflows., • Knowledge of business productivity applications on Mac including Adobe Creative Cloud (Acrobat, Photoshop, Illustrator), Microsoft Project, Microsoft Visio (via alternatives or virtualization)., • Familiarity with web browsers on Mac (Safari, Chrome, Edge, Firefox) and their enterprise management capabilities., • Advanced understanding of residential and office networking for Mac devices, including mesh WiFi systems, routers, switches, and troubleshooting connectivity issues. Essential Competencies: Professional Skills • Exceptional customer service orientation with proven ability to anticipate needs and exceed expectations of executive-level clients., • Outstanding interpersonal and communication skills with the ability to explain complex technical concepts in clear, non-technical language appropriate for executive audiences., • Demonstrated ability to quickly build trust and establish credibility with C-level executives and their administrative staff., • Highest standards of ethics, integrity, professionalism, and discretion when handling confidential and sensitive information., • Exceptional written and verbal communication skills for documentation, reporting, and executive-level correspondence., • Proven ability to remain calm, professional, and solution-focused under pressure, especially during high-visibility incidents or time-sensitive executive needs., • Advanced analytical, problem-solving, and troubleshooting capabilities with a methodical approach to complex technical issues., • Extreme discretion in handling sensitive, confidential, and proprietary information with full awareness of executive privacy requirements., • Action-oriented and results-driven mindset with ability to define innovative solutions and implement them efficiently., • Ability to work independently with minimal supervision while effectively managing multiple competing priorities and urgent requests., • Professional maturity to recognize limitations, seek assistance when needed, and leverage resources effectively to consistently achieve successful outcomes., • Strong time management and organizational skills with ability to balance proactive tasks with reactive support needs., • Flexibility and adaptability to adjust schedule for executive needs, including occasional early morning, evening, or weekend support for critical situations or events., • Professional appearance and demeanor appropriate for executive-level interactions and high-visibility environments., • Commitment to continuous learning and staying current with Apple's latest technologies, updates, and best practices.

("US citizens and Green Card Holders and those authorized to work in the US are encouraged to apply. We are unable to sponsor H1b candidates at this time.”) We are currently working with a well-known supermarket chain for a Field Support Technician role, where you will be supporting retail stores in the Brooklyn area. Here are the key details: Title: Field Support Technician Location: Newark, New Jersey ( Coverage area: North Jersey) Job Type: Full-time Salary: $55,000 annually Benefits: A comprehensive benefits package is included Requirements: Bilingual (Spanish and English) and must have a valid driver’s license and personal vehicle (fuel for store-to-store travel will be reimbursed, with toll and parking expenses also covered. Please note that 10 miles will be deducted per day to account for the commute from home to office and back). Coverage Areas: North Jersey Role Responsibilities: • Act as the first point of contact for support issues across various retail stores., • Daily travel between stores in the mentioned areas is required., • Handle service tickets and work logs, including troubleshooting issues related to desktops, networks, software, and hardware., • Train employees on various applications and wireless peripherals., • Elevate complex issues to the appropriate team members., • Perform hardware and software installations., • Assist with troubleshooting desktop applications, network equipment (routers, switches, access points), and configuring Zebra handhelds and printers., • Physical capability to lift and handle hardware (like cables, printers, monitors) is required. This role requires someone who can interact effectively with store employees, many of whom primarily speak Spanish. The ability to communicate fluently in both English and Spanish is a key requirement for this position. A reasonable, good faith estimate of the minimum and maximum annual salary for this position is $55,000 with full benefits(401k, health care, dental, vision, PTO, Flex days, vacations.) Job Type: Full-time Job Type: Full-time Pay: $55,000.00 per month

Join Our Team as an Industrial Hygienist! Are you ready to elevate your career with a dynamic and growing firm that values your contributions and offers exciting opportunities for advancement? Hillmann Consulting, LLC, a leading nationwide environmental consulting firm, is seeking a passionate and driven Industrial Hygienist to join our team in the North Jersey and NYC areas. Why Hillmann Consulting? At Hillmann, we believe in fostering a collaborative, team-oriented environment where your career can thrive. With over 40 years of experience, we specialize in Environmental Health and Safety, Remediation Support, Real Estate Due Diligence, Geotechnical, and Laboratory Analysis services. Our work spans from emergency planning for major disasters to ensuring compliance with federal and state regulations, including OSHA, DOT, and USEPA. Visit the Life tab on our LinkedIn profile to learn more about life at Hillmann. What We Offer: • Career Growth: We empower you to drive your own career path with continuous learning and professional development opportunities., • Exciting Projects: Work on a variety of impactful projects, from disaster response to environmental assessments, in both local and nationwide contexts., • Comprehensive Benefits: Competitive salary, medical, dental, and vision insurance, employer-401(k) plan, tuition assistance, and volunteer time. Who We’re Looking For: A motivated individual who thrives in a fast-paced environment and adapts well to change. You should possess excellent organizational skills and a strong commitment to customer service and safety. Candidates must be able to work with minimal supervision, learn quickly, and possess excellent problem-solving skills. Qualifications: Education: • Associate’s, Bachelor’s, Master’s, or equivalent degree in a Science-related field. Experience: • 1 to 4 years in the industry, with a focus on asbestos, lead, indoor air quality, and mold/moisture inspections. Skills: • Excellent communication, • Client management, • Proficiency in Microsoft Office and Excel. Certifications: • Lead: Inspector/Assessor or Sampling Technician preferred., • Additional certifications like CHMM, 40 Hour HAZWOPER, 10/30 Hour Construction Safety, and CIE/CMI are desirable but not required. Other Requirements: • Mastery of the English language – written and spoken., • Valid driver’s license., • Reliable transportation., • Ability to frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 50 pounds., • Ability to occasionally work at heights greater than 6 feet (examples: ladders, rooftops, man-lifts, scaffolding)., • Ability to occasionally work in confined spaces (examples: crawlspaces, attics)., • Ability to frequently reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl., • Must be able to walk up/down multiple flights of stairs., • Ability to complete all mandatory trainings, including safety training., • Availability for off-hour emergency work., • Respond as a member of the Hillmann 24-hour disaster response team. *We welcome candidates with initial asbestos AHERA certifications eligible for state certification tests. Responsibilities: • Maintain certifications and licenses., • Respond to client emergencies as needed., • Conduct thorough investigations related to Industrial Hygiene, including indoor air quality, mold/moisture inspections, asbestos surveys, and lead-based paint inspections., • Develop remediation plans, report findings, and ensure compliance with industry guidelines., • Collect air samples during asbestos abatement work to verify compliance with local, state and Federal regulations including background, daily and clearance air monitoring; accurately completing project records, log books and chain of custody forms; and timely submission of samples and required project documentation., • Perform air and bulk sampling according to EPA, OSHA, NIOSH, and industry analytical methods., • Perform limited asbestos containing material surveys., • Perform employee exposure monitoring for various environmental hazards., • Perform other responsibilities as assigned. At Hillmann Consulting, LLC, we are committed to your professional development and well-being. Join us and make a difference with a company dedicated to excellence and innovation in environmental consulting. Ready to Apply? Submit your application today and take the next step in your career with Hillmann Consulting, LLC. We look forward to welcoming you to our team! Hillmann Consulting, LLC is an equal opportunity employer.

Job Description Our client is a ommercial and industrial boiler contractor serving building owners, property managers, hospitals, universities, manufacturers, and process facilities across New Jersey and the greater New York metropolitan area. Our work spans new boiler and boiler room installations, code repairs and alterations to pressure-retaining equipment, burner and controls retrofits, preventive maintenance agreements, emergency service, and efficiency upgrade projects. We are seeking a General Manager to take full operational and financial ownership of the business. This is a true P&L role. You will run service, construction, and shop operations day to day, own the numbers that ownership sees every month, protect and advance our code certifications, and build a durable leadership culture in a trade where skilled labor is scarce and loyalty is earned rather than bought. The right person is equal parts operator, financial thinker, and people leader — comfortable in a boiler room at 2 a.m. and in front of a spreadsheet the next morning. This role exists to professionalize how the business runs without breaking what already works. You will inherit experienced field technicians and long-standing customer relationships. Your job is to raise margin, tighten execution, and modernize systems while keeping the crew intact and the phone answered. Core Responsibilities Profit & Loss Ownership You own the P&L outright — top line, gross margin, overhead, and net. You will be accountable for annual budgeting, monthly forecasting, and the variance conversations that follow when actuals miss plan. • Build and defend the annual operating budget across every revenue line: service labor, preventive maintenance agreements, projects and retrofits, parts and equipment sales, rental, and shop work., • Own gross margin by division and by job. Understand where margin is made and where it leaks — mispriced service calls, unbilled work, warranty rework, unmanaged overtime, change orders never captured., • Manage work-in-progress and percentage-of-completion reporting on project work, including over/under billings, cost-to-complete accuracy, and backlog quality., • Drive cash performance: billing velocity, DSO, retainage recovery, unbilled revenue, and vendor terms., • Approve pricing, quoting standards, labor rates, and markup structures; make the call on which work is worth chasing and which is not. Financial Reporting & Analysis Produce the monthly financial package that ownership relies on to make decisions. This is not accounting support work — you are expected to build the reporting, interpret it, and act on it. • Assemble and present a monthly package including P&L with budget variance, gross margin by revenue line, backlog and WIP schedules, cash flow and aging, and KPI dashboards with commentary on what moved and why., • Build the operating metrics that run the business: technician billable utilization and labor efficiency rates, revenue per technician, first-time fix rate, callback percentage, average service ticket, quote-to-close conversion, PM agreement renewal and attachment rates, and overtime as a percentage of field labor., • Prepare capital request business cases for fleet, tooling, shop capacity, and headcount, with payback and return expectations stated plainly., • Develop customer-facing financial proposals for capital projects — installed cost, projected fuel and efficiency savings, simple payback and lifecycle cost, and applicable utility incentive and rebate capture. Operations, Code Compliance & the R Stamp Program You are the executive owner of our quality and code program. You are not expected to personally perform inspections or weld, but you are expected to understand what our certifications require and to make sure the organization never puts them at risk. • Maintain the integrity of the company’s National Board R Certificate of Authorization: enforce the Quality Control Manual in daily practice, support the designated QC Manager, manage the relationship with our Authorized Inspection Agency, and lead preparation for triennial National Board review and renewal audits., • Ensure repairs and alterations to pressure-retaining items are performed and documented to NBIC (NB-23) requirements, including R-1 and R-2 form execution, proper nameplate and stamping practice, and complete traceability of materials and welder qualifications., • Govern the welding program: ASME Section IX WPS, PQR, and welder performance qualification currency; continuity logs; and NDE coordination with third-party testing partners., • Apply ASME Section I, Section IV, and Section VIII Division 1 requirements appropriately across power boilers, heating boilers, and pressure vessels., • Enforce ASME CSD-1 controls and safety device requirements and NFPA 85 combustion safety practice on automatically fired equipment., • Own field execution across service dispatch, project scheduling, manpower planning, procurement and equipment lead times, subcontractor management, fleet, and shop throughput., • Own safety outcomes and the metrics that follow the company into every bid: TRIR, DART, and Experience Modification Rate. Lockout/tagout, confined space entry for boiler and vessel work, hot work, and respiratory protection are non-negotiable disciplines. Team Leadership & Change Management The technical problems in this business are solvable. The people problems are the hard part, and they are the reason this role exists. We are looking for high emotional intelligence — someone who reads a room, hears what a technician is actually saying under a complaint, and can hold a hard line without humiliating anyone. • Lead a multi-disciplinary team spanning field service technicians, boilermakers and welders, project managers, estimators, dispatch, and administrative staff., • Introduce process, measurement, and accountability into an environment that has historically run on relationships and tribal knowledge — and do it in a sequence the team can absorb. Sequencing and communication matter more than the changes themselves., • Build the succession bench: recruit, develop, and retain technicians in a labor market where the experienced boiler mechanic pool is shrinking and every competitor is fishing in the same pond. Own the apprenticeship and mentoring pipeline., • Set clear performance expectations, run consistent one-on-ones and reviews, coach the willing, and move decisively on the unwilling., • Serve as the escalation point for customer conflict, jobsite disputes, and internal friction — de-escalating without conceding margin. Commercial Growth & Customer Retention • Grow recurring revenue through preventive maintenance agreements and full-coverage service contracts; improve renewal rates and expand scope within existing accounts., • Support estimating and bid strategy on larger installations and retrofits; sit at the table on the accounts that matter., • Position the company on efficiency-driven work — burner and controls upgrades, condensing economizers, boiler plant optimization, fuel conversions, and decarbonization retrofits — where regulatory pressure is generating demand., • Maintain relationships with OEMs, distributors, engineering firms, mechanical contractors, and property management groups. Requirements Required Qualifications • Ten or more years of progressive operations leadership in commercial or industrial boiler, mechanical HVAC, power generation, or process piping contracting, including at least five years with direct P&L accountability., • Demonstrated experience operating inside an R Stamp certified organization — you have lived under a Quality Control Manual, worked alongside an Authorized Inspector, and been through a National Board review., • Working command of ASME Boiler and Pressure Vessel Code and the National Board Inspection Code as they apply to repair, alteration, and new installation., • Track record of improving gross margin and operating income in a service-and-project business, with specific numbers you can speak to., • Proven ability to build financial reporting from operational data and present it credibly to an owner, board, or private equity sponsor., • Experience leading fifteen or more employees across field and office functions, including hiring, development, and performance management., • Fluency with service management and ERP platforms and the discipline to make a team actually use them., • Bachelor’s degree in engineering, construction management, business, or a related field — or an equivalent combination of trade credentials and operating experience., • Valid driver’s license and willingness to be present in the field and at customer sites throughout the NJ/NY territory. Preferred Qualifications • Direct experience managing or holding responsibility for an R Stamp quality program, including manual authorship or revision and audit preparation., • Additional ASME certifications in the organization’s scope, such as S, U, PP, or A stamps, and National Board VR experience., • Prior background as a boiler technician, boilermaker, welder, or field service engineer before moving into management., • Experience with combustion analysis, boiler efficiency testing, stack loss and thermal efficiency measurement, O2 trim, turndown optimization, and heat recovery., • Union contract administration experience in the NJ/NY market., • Formal change management, Lean, or continuous improvement training., • Experience integrating an acquired business or standing up new systems and processes post-acquisition. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Compensation: $100,000 - 150,000 base salary + bonues and car allowance

Job DescriptionParatransit General Manager Location: Cranford, NJ Pay: $80,000 - $90,000 Employment Type: Full-Time About the Role The Paratransit General Manager is responsible for leading all aspects of daily paratransit operations, with a focus on safe, reliable service, contract compliance, customer satisfaction, employee performance, and financial results. This role serves as the primary operational leader for the location and works closely with the customer, local leadership, employees, and support teams to ensure service expectations and contractual requirements are consistently met. Key Responsibilities • Lead daily paratransit operations and ensure safe, reliable, and efficient service., • Maintain compliance with contractual requirements, company policies, ADA requirements, and applicable federal, state, and local regulations., • Build and maintain a strong working relationship with the customer and serve as a primary point of contact for operational matters., • Lead, coach, and develop location leadership and frontline employees., • Oversee staffing levels, scheduling, employee performance, attendance, and workforce planning., • Monitor operational performance and implement corrective actions when service or performance expectations are not being met., • Maintain a strong safety culture and ensure established safety processes and procedures are followed., • Partner with Safety, Maintenance, Human Resources, Recruiting, Finance, and other support functions., • Manage location financial performance, including labor, operating expenses, productivity, and budget performance., • Identify opportunities to improve service quality, efficiency, employee engagement, and customer satisfaction.What Success Looks Like, • Safe and reliable transportation service, • Strong contract and regulatory compliance, • Consistent achievement of operational performance goals, • Effective staffing and employee retention, • Strong customer relationships, • Responsible financial management, • A well-developed and accountable leadership teamQualifications, • 5+ years of transportation, paratransit, transit, or related operational leadership experience., • Experience managing a contract-based transportation operation preferred., • Knowledge of ADA requirements and demand-response or paratransit operations., • Demonstrated experience leading large teams and managing staffing, employee performance, and labor-related issues., • Experience with collective bargaining, union environments, or union labor relations a plus., • Strong financial and operational management skills., • Strong communication, leadership, problem-solving, and customer relationship skills., • Valid driver's license required., • CDL or ability to obtain appropriate licensing may be required based on location and operational needs.Physical Requirements and Working Conditions This position operates in both an office and transportation operations environment and may require regular interaction with employees, customers, vehicles, and operating facilities. Availability outside normal business hours may be required based on operational needs. Why Join First Student First Student offers the opportunity to lead a critical transportation operation while working with a team focused on safety, service, accountability, and operational excellence. As General Manager, you will have direct influence over employee experience, customer relationships, service performance, and the overall success of the location. Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this position at any time. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description Northern NJ Mobile Maintenance/Porter Technician A privately owned regional commercial real estate management group is looking for a full-time Mobile Maintenance/Porter Technician to oversee and perform duties related to the overall maintenance of the Northern New Jersey commercial retail, office and industrial properties. Qualifications and Requirements • Candidate must be a self-starter, possess a valid driver’s license and speak English fluently., • Ability to professionally interact with tenants on site., • Position includes physical labor, light construction, light carpentry, general plumbing, minor HVAC and electrical, walking, climbing ladders, porter services., • Must have the ability to use a smartphone to document conditions and report to the Maintenance Supervisor and Property Manager., • Software interaction with email, smart phone, RealPage Commercial Mobile Maintenance app., • Candidates are expected to provide their own basic hand and power tools, such as a drill, hammer, screwdriver set, and other standard tools necessary to perform routine maintenance and repairs., • No prior criminal convictions. Job Responsibilities Include but Are Not Limited To: • Requires driving from property to property performing various maintenance and porter tasks., • Company Vehicle will be provided during working hours, must have personal transportation to and from work., • Maintain work truck and all equipment., • Ability to professionally interact with tenants on site., • Position requires the performance of maintenance work inside and outside of properties., • Maintenance task changes daily based on what is needed. Tasks include but not limited to, physical labor, walking, climbing ladders, minor roof maintenance, door lock replacements, minimal carpentry, sheetrock, and painting, porter services to maintain a clean exterior appearance such as litter clean up, graffiti removal, sticker removal, storefront glass and frame cleaning, weed killer, etc. vacant space cleanliness, providing access for vendors, utility companies, town inspectors etc., • Able to complete service requests issued by commercial team, in a timely and efficient manner., • May require occasional after-hours duties during emergencies., • Able to provide technical information and recommendations to executive management., • Use of ladders will be frequently required in this position. Experience and Education Requirements • Minimum of 3-5 years of experience., • High school diploma required., • Vocational or trade school certifications are a plus., • Previous retail buildout experience a plus.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary, • Free uniforms, • Paid time off, • Health insurance, • ???? Job Description – Pool Cleaner / Valet Technician, • Position Overview We are seeking a reliable and detail-oriented Pool Cleaner / Valet Technician to join our team for the seasonal pool service period. This role involves performing routine pool cleaning, water chemistry balancing, equipment inspections, and customer service support. The ideal candidate will be punctual, safety-conscious, and able to deliver excellent service to our customers. Key Responsibilities • Read all notes on tickets prior to leaving for the day and prepare for the route, • Upon arrival, ring the bell (unless otherwise noted) and announce service visit, • Vacuum, skim, and brush pool at each visit, • Empty pump and skimmer baskets each visit, • Backwash and clean cartridges as needed, • Inspect pool equipment and report issues that cannot be fixed during the visit, • Perform water chemistry checks and balance as required, • Complete water analysis report with notes of work performed, issues found, and customer expectations; leave a copy for the customer, • Contact the office and speak with the In-House Mechanic when unsure of procedures, • Adhere to all safety guidelines, • Start time is 7:30 AM; technician must be on the road to the first job site by 8:00 AM (deductions apply if not adhered to), • Provide at least two weeks’ notice for personal day requests, • Obtain supervisor approval for any job changes between technicians, • Notify office immediately of any accidents or incidents with company vehicles, • Compensation & Benefits, • Hourly Rate: $20–$24 per hour (depending on experience), • Annual Bonus, • 401(k) Employer Contribution, • Medical Insurance Reimbursement: $200 per month, • Seasonal Position (April–October), • Qualifications, • High School diploma or equivalent, • Prior pool cleaning or maintenance experience preferred, • Ability to lift 50–75 lbs. unassisted, multiple times per day, • Ability to frequently reach, stoop, bend, and kneel daily, • Ability to withstand extensive walking and standing daily, • Excellent customer service skills, • Proficiency with basic computer systems

Job Description About the job: We are searching for highly skilled House Cleaning Technicians, house cleaners, and housekeepers who take pride in their work. You will be responsible for cleaning, vacuuming, washing, dusting, mopping and sanitizing all areas and surfaces of our clients’ homes, apartments and small offices. What does it pay? We pay an average of $18-$22 per hour, plus benefits. That's about $700-$900 per week plus tips every week. Why work with us? We believe if our employees are happy, they’ll do their work with passion while we help them accomplish their goals and dreams. We also understand what it takes to be a good cleaning technician, which is why we respect, value and pay very well for great talent. Benefits: Disability insurance and on-the-job accident protection. Get paid and learn: Your training will be paid ($10-12/hr). No experience is required. Applicants must be used to physical labor, standing for 6-8 hours a day. Job Security: The cleaning industry is considered essential labor! It’s the best time to join us, and it’s a job that will always be needed. Paid vacation: Enjoy one week of leisure time to rest or spend quality time with your loved ones; available after 12 months of consecutive employment. Two weeks are paid after 3 years of employment. Weekly ACH payment: You will receive a weekly payment (direct deposit to your bank account). Family-friendly schedule: You’ll have 6 national holidays off and 5 pre-approved days for personal appointments. Do I work alone or on a team? Cleaning jobs are mostly performed “solo,” or by one technician. In the event of larger jobs, you’ll be assigned to a team. You must have your own car to be able to carry cleaning supplies and mobilize to the work sites. All of the teams are dispatched from our office or your home directly to customer locations. How do I check my schedule? We use a scheduling app on our phones, where you can easily pull up your daily schedule. How do I get paid? We pay using direct deposit to your bank account. We use a digital payroll system where you’ll be able to see your weekly payment and pay stubs. Job requirements: Over 21 years of age Free of drugs and felonies Authorized to work in the US (citizenship, residence, work permit) Must own a vehicle and smartphone Valid car insurance and driver's license Verifiable work history and references, preferably 1 year or more Excellent attitude and work ethic Join our team by applying below. Questions? Please contact our office. Housecleaner - House cleaning jobs - House cleaning technician jobs - Housekeeping jobs - Janitorial Cleaner - Professional House Cleaner - Residential cleaner - Part time maid - Hotel housekeeping jobs

Job Description Join our dynamic team as a Traffic Control Technician and play a vital role in ensuring safety and efficiency on construction sites and roadwork projects. In this energetic position, you will be responsible for directing traffic, setting up safety signage, and assisting heavy equipment operators to maintain smooth workflow. Your proactive approach will help protect workers, motorists, and pedestrians while supporting the successful completion of infrastructure projects. This paid position offers an exciting opportunity to develop your skills in heavy equipment operation and construction safety. This role involves managing lane closures throughout New York, New Jersey, Delaware, and Pennsylvania. The compensation structure is as follows: • Starting Rate: $17 per hour., • One Month: Increases to $18 per hour after all required documentation has been submitted, • 60 Days: Upon running your own crews, the rate moves to $20 per hour., • Six Months: After obtaining TCC certification and moving to STCC classification, the rate increases to $25 per hour, • Prevailing Wage: We also offer prevailing wage opportunities starting at $100.00 per hour. Please note that this is a full-time, on-call position with shifts that vary between days and nights each week. Candidates must be available for both day and night work To proceed with your phone interview, please call our office at [Office Phone Number] between 9:00 AM and 4:00 PM, Monday through Friday. Duties • Set up and maintain traffic control devices such as signs, cones, barrels, and barriers to guide vehicles and pedestrians safely around construction zones, • Direct traffic flow using hand signals or flagging equipment to ensure safety for workers and the public, • Assist with the operation of heavy construction equipment including dozers, loaders, backhoes, graders, front loader trucks, dump trucks, and paving machinery when necessary, • Conduct utility locating to identify underground utilities before excavation or construction activities begin, • Support construction crews by providing safe access routes and coordinating vehicle movements on-site, • Monitor work zones continuously to ensure compliance with safety regulations and company policies, • Maintain detailed records of daily activities, safety inspections, and equipment usage Qualifications • Valid Drivers License with less then points, • Availability to work days and nights and very little weekends, • Able to carry 30lbs over your head, • Able to get into a truck and out of a truck, • English is the first language learned, • Have own vehicle to arrive to our hub, • Can pass random drug tests, even marijuana Embark on a rewarding career that combines safety leadership with hands-on construction experience. We’re dedicated to supporting your growth while ensuring every project runs smoothly. Join us today to be part of a team committed to building safer roads and communities!

Job DescriptionDescription: Evident Process Heat and Power is seeking a Field Service Manager to lead and support our team of field service technicians. This is an excellent opportunity for an experienced technician who is looking to step away from hands-on field work and travel, while still leveraging their technical expertise to mentor, coordinate, and support field operations. The Field Service Manager will oversee daily field service activities, manage scheduling and resources, and act as a key point of contact between our customers and the company. This position requires exceptional organizational skills, clear and effective communication, and a strong commitment to customer satisfaction. Key ResponsibilitiesTeam Leadership & Support • Supervise and mentor field service technicians, providing guidance, coaching, and technical support., • Assist with onboarding and training of new technicians., • Foster a positive and collaborative work environment. Operational Management • Coordinate and schedule field service work, ensuring timely response to customer needs., • Track and manage service projects, parts, and equipment readiness., • Maintain accurate service records, reports, and metrics. Customer Relations • Serve as the primary point of contact for customers regarding field service work., • Communicate service status, schedules, and expectations clearly and professionally., • Address customer concerns promptly and ensure high levels of satisfaction. Process Improvement • Identify opportunities to improve field service efficiency, safety, and quality., • Collaborate with other departments (engineering, sales, operations) to resolve recurring issues. Requirements: Required • Strong background as a field service technician (industrial equipment, process systems, or similar)., • Excellent organizational, scheduling, and problem-solving skills., • Clear and professional written and verbal communication abilities., • Customer service mindset and ability to build strong relationships. Preferred • Previous experience managing or leading field service technicians., • Familiarity with service scheduling systems, ERP software, and Microsoft Office tools., • Understanding of safety standards and compliance practices.

Job Description Credit-Free Healthcare instructor (EKG, Phlebotomy, Medical Assistant) Department: Workforce Development Reports to: Director of Workforce Development Classification: Part-time, 1099-contractor Salary: $35 - $45/hour depending on experience Schedule: Flexible/maximum 29 hours per week Who We Are JVS repairs the world, one person at a time: allowing our program participants to achieve the highest degree of independence and dignity. Our staff of more than 50 skilled professionals work with a diverse range of individuals in need of employment, training, refugee services, education, disability services and other specialized services. Learn more at: www.jvsnj.org The Role This is a part-time contractor instructor role for credit-free healthcare programs. As an instructor, this position will be expected to provide training through a variety of modalities, including online and in-person. Training would take place at our East Orange location. The ideal candidate will have a strong background in healthcare training and working with employers in the field. This role is expected to create and provide a syllabus for students, adhere to the curriculum for the class, assess student learning, and maintain a positive learning environment. This is a grant funded position. Essential Functions · Provide classroom instruction to adult credit-free Patient Care Technician students utilizing an approved training curriculum and materials · Deliver lectures using up-to-date hands-on techniques · Knowledge of best practices in the field · Plan, prepare, and deliver approved curriculum · Plan and organize instructional materials/supply inventories/tools/equipment (notify lack of supplies in a timely manner) · Prepare lesson plans · Provide and maintain a clean environment after each class · Track and report student grades and attendance · Lead, inspire, motivate, and advise students to actively participate in all aspects of their educational process · Provide regular, accurate, and timely feedback to students and the school concerning academics, behavior, and poor attendance · Participate in professional development trainings · Other duties as assigned Qualifications & Experience · Minimum of an Associate’s Degree required · National Health Association (NHA) Certification · Have a proven track record in assisting students successfully pass the NHA exam · Must have a minimum of 3-5 years of hands-on experience in the field and teaching EKG, Phlebotomy, or Medical Assistant · Must be able to develop and maintain excellent relationships with a diverse staff and student population · Must possess excellent verbal and written communication skills · Ability to multi-task in a fast-paced environment · Consistently demonstrate the highest levels of integrity · Possess strong interpersonal skills · The ability to work effectively with and support students from diverse backgrounds · Maintain a strong presence and have excellent skills in teaching · A flexible schedule, mornings, evenings, and or weekends · Proficient in Microsoft Office (i.e Word, Excel, Teams, etc) · Must be highly organized and detail-oriented · Excellent organizational skills · Passion for education and a commitment to student success JVS of Metrowest is an Equal Employment Opportunity Employer committed to excellence. Employment offers are made on the basis of qualifications and without regard to race, sex, religion, national or ethnic origin, disability, age veteran status, or sexual orientation or other protected classes under the State and Federal law. Powered by JazzHR 5AhUkS8uVe

Job Description Laboratory Technician I Company Overview Camin Cargo is a leading provider of inspection, testing, and certification services in the oil and gas industry. We are committed to ensuring the highest standards of safety, quality, and compliance for our clients worldwide. We are seeking an energetic Laboratory Technician I to join our team. Position Summary The Laboratory Technician I is responsible for conducting routine laboratory tests and analyses on various samples related to crude oil, refined products, and petrochemicals. This entry-level position requires attention to detail, adherence to safety standards, and the ability to accurately document test results. Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. • Perform routine laboratory tests and analyses on crude oil, refined petroleum, petrochemical products, and quality control samples., • Record test results, input data, and analyze findings for review by senior laboratory staff or management., • Ensure that all samples are accurately labeled and documented for traceability and regulatory compliance., • Enter test results and data into the company’s internal software systems for tracking and reporting purposes., • Follow safety protocols and best practices for handling hazardous materials and operating laboratory equipment., • Assist in maintaining and organizing the laboratory inventory., • Support senior technicians and lab supervisors in specialized testing as needed., • Contribute to maintaining the cleanliness and orderliness of the laboratory., • Participate in training sessions and professional development opportunities as required., • All other job duties as defined. Minimum Requirements • Associate's degree in a relevant field (Chemistry, Chemical Engineering, or a related science preferred)., • 0-2 years of experience in a laboratory setting, preferably in the oil and gas industry., • Knowledge of laboratory safety procedures and practices., • Strong attention to detail and ability to handle multiple tasks., • Ability to follow instructions accurately and work under minimal supervision., • Good written and verbal communication skills., • Visual acuity to interpret test results and operate laboratory instruments., • Proficient in Microsoft Office Suite (Word, Excel, Outlook)., • Ability to learn new software systems and applications specific to the company's internal processes., • Must be able to work effectively both independently and as part of a team. Fitness for Duty – Physical Demands • The position requires prolonged periods of standing and walking during sample preparation, testing, and equipment calibration., • Ability to lift and carry up to 30 pounds, such as chemical containers or laboratory equipment., • Working in varying environmental conditions, including exposure to chemicals and laboratory hazards, while adhering to safety protocols., • Ability to wear personal protective equipment (PPE), including gloves, safety glasses, lab coats, and respirators, as necessary. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Job Description LEAP leads the world in the development and sale of cloud based legal practice management software for small law firms on a Software as a Service (SaaS) model. We employ more than 1000 people globally, have offices in the USA, Australia and the UK with more than 12,000 law firms using our software worldwide. We are seeking a Helpdesk Technician to join our highly motivated, high velocity and growing team on a hybrid work model. LEAP will provide you with the best training, equipment, mentoring and support in order for you to be successful. We employ people who are smart and can get things done. The Helpdesk Technician will focus on guiding LEAP customers for various use and installation related questions. The candidate should be able to understand customer's need related to particular product use and maintain a product log capturing any identified issues or new feature requests. Once fully trained, this role will be working a remote 40-hour week shift pattern from 9-6pm daily. Candidates using AI during the interview process will not be considered, and all interviews will take place by zoom, with a final in person interview in our Jersey City office. Responsibilities and Duties (including but not limited to) • Provide client support and technical issue resolution via email, phone and chat, • Understand client's business/software needs, • Resolve technical issues by guiding clients with specific features of LEAP software products, • Proactively improve LEAPs self-support centre by developing better self-help material (written how-to articles, demo videos, etc), • Able to work independently and efficiently to meet deadlines. All training will be provided. Requirements • 1 years’ customer service experience required. Accounting or Law would be an advantage but not essential., • Excellent communication, customer service and writing skills are essential. A large portion of the time is spent on phone and chat with helping customers., • Demonstrated knowledge of SQL and Access databases., • Must be computer proficient with basic computer troubleshooting knowledge such as how to manage files, folders, network drives, folder maps, installation issues etc., • Experience with Microsoft products including MS Word and Excel., • Demonstrate strong collaborative teamwork and people skills., • Excellent collaborative spirit., • A clear understanding of LEAP culture., • Thrives working with an intellectually stimulating, high-energy team., • Attention to detail, ability to manage time effectively, ability to work independently but within a team environment., • Ability to meet deadlines and commit to team goals., • Must be based in the Tri-State area. While the role is 100% remote, there may be annual in person training that takes place in our Jersey City headquarters. Benefits • Medical, Dental and Vision Plans Available, • 401k with Company Matching Program, • Virtual Staff Events, • Employee Assistance Plans, • Flexible Annual Leave, • Company Shares Opportunity, • Salary $56-62k OTE We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age. We look for the best person for the job. To ensure a fair and authentic recruitment process, candidates are expected to represent their own skills and experience throughout; the use of AI to generate application materials or provide real-time assistance during interviews or assessments may result in removal from the recruitment process.

Job DescriptionJob Title: Research and Development Engineering ManagerJob Description We are seeking an experienced Research and Development (R&D) Engineering Manager to lead new product development in a hands-on engineering and manufacturing environment. In this role, you will drive the design and development of new mechanical products and larger-scale industrial equipment, taking concepts from initial idea through testing, troubleshooting, and full production rollout. This position offers the opportunity to make an immediate impact within a growing organization by owning new product designs, collaborating closely with technicians and production personnel, and helping to achieve the goal of releasing approximately one new unit or design per year. Responsibilities • Lead and support the research and development of new mechanical products and industrial equipment from concept through production., • Develop new product designs and guide them through the full lifecycle, including design, build, testing, troubleshooting, and transition to manufacturing., • Oversee and actively participate in product testing to validate performance, safety, and reliability before production release., • Identify and resolve engineering issues during testing and after products reach the manufacturing floor, driving continuous design improvements., • Work closely with the R&D technician and engineering team during the development and build of new units, ensuring technical accuracy and manufacturability., • Support new products as they transition onto the production floor, providing engineering guidance and resolving production-related challenges., • Collaborate cross-functionally with engineering, production, welders, material handlers, and other manufacturing personnel to address issues and optimize new product introduction., • Help ensure manufacturing teams are fully prepared and trained to successfully build newly developed products, including communicating design intent and key assembly details., • Drive new product development efforts in alignment with the companys goal of developing approximately one new unit or design per year., • Provide hands-on engineering leadership while remaining closely connected to the product, shop, and production environment., • Own products from design through production, including involvement in prototype builds, testing, troubleshooting, and production rollout., • Offer manufacturing support by monitoring early production runs, gathering feedback from the shop floor, and implementing design or process improvements as needed., • Demonstrate engineering leadership by taking ownership of R&D projects, guiding technical work, and setting direction for new product initiatives., • Stay engaged with the equipment and manufacturing environment, balancing leadership responsibilities with direct, hands-on engineering involvement.Essential Skills, • 57+ years of engineering experience, with a strong background in mechanical or industrial equipment., • Approximately 23 years of R&D or new product development experience, focusing on designing and developing new products rather than solely supporting existing ones., • Proven experience taking products through the full lifecycle: design, build, testing, troubleshooting, and production., • Experience working with larger-scale mechanical, industrial, or capital equipment rather than only small devices or components., • Ability to hit the ground running without requiring extensive training in this type of engineering environment., • Comfort working in a hands-on engineering and manufacturing setting, staying close to the equipment and production processes., • Demonstrated capability in mechanical design engineering, including creating and refining designs for new products., • Strong troubleshooting skills to identify, analyze, and resolve engineering issues during testing and manufacturing., • Experience supporting designs as they transition onto the production floor, including manufacturing support and production engineering exposure., • Comfort collaborating directly with production personnel, welders, material handlers, R&D technicians, and other shop-floor staff in a direct, warehouse-style environment., • Ability to provide engineering leadership, take ownership of R&D projects, and guide technical work, even without a specified minimum number of management years.Additional Skills & Qualifications, • background in industrial automation, with experience working on automated mechanical equipment or systems., • Experience designing or developing material-handling equipment, such as conveyors or related systems., • Package-handling industry experience, particularly with equipment used for moving, sorting, or processing packages., • Exposure to conveyor systems; direct conveyor experience is beneficial but not required., • Capital equipment experience, particularly with larger-scale mechanical or industrial systems., • Production engineering experience, providing insight into manufacturability and production processes for new products., • CAD experience, with the ability to work with computer-aided design tools to create and modify product designs (specific software not required)., • Experience with product testing, including developing test plans and evaluating performance of newly designed products before production., • Prototype development experience, including building and evaluating prototypes as part of the R&D and testing process., • Demonstrated cross-functional collaboration skills, comfortable working with engineering, technicians, welders, material handlers, and production personnel., • Hands-on engineering mindset, preferring to stay engaged with equipment and the manufacturing environment rather than purely managing from an office., • Prior experience in engineering leadership or ownership of technical work, particularly in R&D or new product development settings.Work Environment The work environment is very hands-on and non-corporate, with a strong warehouse and shop-floor feel. You will spend significant time in and around the production area, working closely with the engineering team, R&D technician, welders, material handlers, and other manufacturing personnel rather than being separated from the operation. The culture is laid-back and joking at times, with a direct communication style, but shifts into focused "crunch time" when projects need to move forward and deadlines approach. Team members on the shop floor can be straightforward and blunt, so this role suits someone who is comfortable working with diverse personalities in a practical, results-driven environment. The organization is growing, offering opportunities to make an immediate impact, take ownership of new product initiatives, and contribute directly to the development and successful manufacturing of new equipment designs. Job Type & Location This is a Contract position based out of Union, NJ. Pay and Benefits The pay range for this position is $60.00 - $62.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract position based out of Union, NJ. Application Deadline This position is anticipated to close on Oct 26, 2026. Workplace Type This is a fully onsite position in Union,NJ. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description Summary: A Medical Laboratory Technician is required to perform routine medical laboratory tests for the diagnosis, treatment and prevention of disease under direct supervision of a qualified supervisor. Responsible for operation of the laboratory. Essential Functions: To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily under direct supervision of a qualified supervisor. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. · Perform technical laboratory functions including chemistry, hematology, urinalysis, immunology and /or other discipline(s) according to approved policies and procedures in which the individual has been trained. · Report test results following approved laboratory protocols alerting clinicians about abnormal results. · Ensure quality control, maintain integrity of samples, and maintain accurate record keeping. · Maintain laboratory equipment and supplies. · Set up, maintain, calibrate, clean, and troubleshoot medical laboratory instruments. · Comply with all laboratory policies and OSHA, CAP, CLIA, and additional state regulations related to safety, cleanliness and infection control. · Assist Lab Management as needed. · Perform all other duties as assigned. Skills: · Knowledge of medical laboratory principles, standards, applications, terminology and tests. · Knowledge of medical laboratory safety, cleanliness and infection control policies and regulations. · Knowledge of medical laboratory equipment and instrument uses and maintenance. · Accuracy – Ability to perform work accurately and thoroughly. · Communication – Ability to communicate effectively verbally and in writing. · Computer Skills – Proficient ability to use a computer and electronic medical record. · Confidentiality – Maintain patient, team member and employer confidentiality. Comply with all HIPAA regulations. · Customer Service Oriented – Friendly, cheerful and helpful to patients and others. Ability to meet patients and others needs while following office policies and procedures. · Detail Oriented – Ability to pay attention to the minute details of a project or task. · Flexibility – Ability to adapt easily to changing conditions and work responsibilities. · Positivity – Display a positive attitude and is a positive agent for change. · Teamwork – Work as part of a team and collaborate with co-workers. · Working Under Pressure – Ability to complete assigned tasks under stressful situations. Education and Experience: · Associate’s Degree or higher preferred · One-year clinical laboratory experience preferred Certification and Licensure: · ASCP, AMT certification or NYS license preferred Work Environment: · Environmentally controlled clinical laboratory environment · Fast paced environment with occasional high pressure or emergent situations · Frequent exposure to bodily fluids · Possible exposure to infectious specimens, communicable diseases, hazardous and toxic substances, and other conditions common to a laboratory environment · Must wear Personal Protective Equipment (PPE) such as gloves or a faceshield · Frequent interaction with a diverse population including team members, providers, patients, regulatory and accrediting agencies, and other members of the public Physical Demands: · Frequent standing, walking, grasping, carrying and speaking · Occasional sitting, reaching, bending and stooping · Lifting, carrying, pushing and pulling up to 50 pounds, with assistance if needed · Frequent use of computer, keyboard, copy and fax machine and phone · OSHA Category 1 \nCompany Description Accu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer. Accu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.

Job Description Firm looking for qualified MBE/WBE/SDVOB subconsultants to join our team in providing eligible candidates for work in the Port District. Concrete field/asphalt plant inspector Experience/Certification Level required: • ACI Concrete Field Testing Technician – Grade I, • NJSAT Asphalt Plant Level 1 & 2, • Radiation Safety-Nuclear Density Gauge Certified, • Efficient in the Marshall Method – ASTM C6926 - Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus, • Perform AASHTO Resource Annual Accreditation equipment calibrations., • Efficient in preparing samples for ASTM C4867 - Standard Test Method for Effect of Moisture on Asphalt Mixtures, • Able to cut asphalt cores and prepare for bulk specific gravity of in place densities in accordance with ASTM D2726 - Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive, • OSHA 10, • OSHA 30, • Current with Secure Workers Access Consortium Equipment required: All proper PPE (i.e. safety boots, reflective vest, safety glasses, hard hat, etc.) Concrete field inspector/lab technician Experience/Certification Level required: • ACI Concrete Strength Testing Technician, • ACI Concrete Field Testing Technician – Grade I, • ACI Aggregate Base Testing Technician, • NJSAT HMA Construction Technologist, • Knowledge of AASHTO Resource Annual Accreditation for equipment calibration., • AASHTO Resource CCRL- Rebar measurements., • Knowledge of Portland cement testing, • Efficient in performing ASTM C1202 - Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration., • Efficient in performing ASTM C215 - Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens, • Efficient in performing ASTM C666 - Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, • Efficient in performing ASTM C157 - Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, • OSHA 10, • OSHA 30, • Current with Secure Workers Access Consortium Equipment required: All proper PPE (i.e. safety boots, reflective vest, safety glasses, hard hat, etc.) \nCompany Description Key-Tech has been engaged in the field of construction testing, inspection, and related laboratory services since 1970. Our headquarters, which consists of a modern office and full laboratory, is located in Keyport, New Jersey. Here at Key-Tech, our goal is to provide our customers with high-quality construction testing methods at a fair price. We strive to provide our over 500 clients with service that is consistently timely, accurate, and dependable. Key-Tech has been engaged in the field of construction testing, inspection, and related laboratory services since 1970. Our headquarters, which consists of a modern office and full laboratory, is located in Keyport, New Jersey. Here at Key-Tech, our goal is to provide our customers with high-quality construction testing methods at a fair price. We strive to provide our over 500 clients with service that is consistently timely, accurate, and dependable.

Job Description About Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. We are reinventing the stellarator using computer-controlled arrays of planar coils to replace the complex magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. We foster an innovative, collaborative, and resilient environment where every team member plays a critical role in our success. Position Overview: Thea Energy is seeking a highly skilled and self-motivated Senior Test Technician to join our rapidly growing team. In this role, you will be a cornerstone of our hardware validation strategy, serving as the hands-on bridge between test plans and real-world execution. Working with a high degree of autonomy, you will build, assemble, operate, and troubleshoot custom high-current, high-vacuum, and cryogenic test stands to validate our superconducting magnets and other critical fusion hardware. You will work closely with engineering and manufacturing teams to ensure rigorous data collection, safety compliance, and continuous process improvement in a fast-paced environment. Key Responsibility Areas: • Assemble, wire, plumb, and commission complex test articles, high-power test stands, cryogenic loops, and high-vacuum test equipment. • Operate multi-day test systems and perform real-time, hands-on troubleshooting of mechanical, electrical, cryogenic, thermal, and vacuum system failure modes alongside test engineers., • Support rapid development of new procedures, measurement methods, and custom tooling for novel tests and enabling exceptional quality and data integrity., • Partner closely with test, magnet, manufacturing, electrical, and mechanical engineering teams to align test scope and requirements, as well as guarantee successful tests and results., • Enforce rigorous safety protocols in high-current, high-field, and cryogenic environments. Maintain tool and workspace organization (5S) and ensure precision test equipment is calibrated and maintained., • Guide and mentor technicians and engineers in shop best practices, schematic reading, and safe testing procedures. Required Qualifications & Experience: • High school diploma or equivalent (Associate degree in a technical discipline preferred)., • 5+ years of hands-on technical experience in shop fabrication, system assembly, hardware testing, or high-tech manufacturing environments (e.g., fusion, aerospace, superconducting magnets, or heavy industry)., • Demonstrated experience building, operating, and troubleshooting at least two of the following: o Testing of superconducting magnet or nuclear fusion systems o High vacuum or ultra-high pressure systems o Cryogenic or fluid handling systems o High-power electrical, control systems, or industrial wiring o Electromechanical, automated, or PLC-driven equipment • Proficiency in reading and interpreting mechanical drawings, schematics, and wiring diagrams., • Skill with hand tools, power tools, precision measuring instruments, and basic shop machining equipment (e.g., saws, manual mills)., • Familiarity with software tools for basic documentation, logging, or reporting (e.g., Microsoft Office)., • Ability to safely lift up to 50 lbs and work comfortably around high-voltage, high-field, and cryogenic environments. Ideal Experience & Skillsets:, • Experience executing automated test routines utilizing LabVIEW, Python interfaces, or PLCs/HMIs., • Familiarity with reflow soldering, PCBA manufacturing/repair, or micro-soldering., • Experience with creating or improving test procedures quality control standards, and non-conformance reporting., • Rigging, overhead crane, and forklift operation certifications or experience., • Strong communication skills with an ability to work independently under tight deadlines. Company Benefits: • Base Pay: $32.00 – $55.00+ per hour (Non-Exempt / OT Eligible) • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a HVAC Operating Engineer to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC Operating Engineer with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the HVAC Operating Engineer will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The HVAC Operating Engineer will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the HVAC Operating Engineer will: • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements • The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position., • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Job Description This position is being recruited in support of a pending Essex County paratransit contract opportunity. Employment is contingent upon First Student being awarded the contract. Candidates may be contacted and interviewed prior to the contract award; however, an employment start date will not be confirmed until the award and implementation timeline are finalized. Assistant General Manager / Operations ManagerWhy First Student? At First Student, our operations leaders are responsible for delivering safe, reliable, and efficient transportation service while supporting employees and maintaining strong customer relationships. The Assistant General Manager/Operations Manager will help lead the Essex County Paratransit operation, supporting a 47-vehicle community transportation program and assisting with the day-to-day management of employees, service delivery, dispatch, scheduling, fleet operations, customer service, and regulatory compliance. About the Role The Assistant General Manager/Operations Manager supports the overall management of the Essex County Paratransit operation and works closely with the General Manager and other local leaders to ensure transportation services are delivered safely, efficiently, and in accordance with contractual and regulatory requirements. This position provides hands-on operational leadership across multiple areas of the business, including employee supervision, dispatching, scheduling, fleet coordination, customer service, and personnel management. The successful candidate will bring significant supervisory or management experience in paratransit, community transportation, public transportation, logistics, fleet management, or a closely related transportation environment. What You'll Do • Support the day-to-day management of the Essex County Paratransit operation., • Assist with oversight of transportation service delivery, including dispatching, scheduling, routing, and daily operations., • Supervise employees and provide day-to-day direction, coaching, and performance management., • Support driver, dispatcher, customer service, and operational staff., • Monitor service performance and help address operational issues as they arise., • Coordinate with maintenance and fleet teams to support vehicle availability and service reliability., • Help manage fleet operations and ensure vehicles are appropriately assigned and available for service., • Support customer service activities and assist with the resolution of passenger or client concerns., • Monitor regulatory and company compliance requirements., • Assist with employee scheduling, staffing, attendance, and other personnel-management responsibilities., • Support safety initiatives and operational compliance programs., • Assist with service disruptions, emergencies, and other operational events., • Review operational data and performance trends and help develop corrective actions or process improvements., • Work closely with the General Manager and other leadership to maintain strong operational performance., • Help promote employee engagement, accountability, teamwork, and a positive work environment., • Perform additional operational and management responsibilities as required.What You'll Bring, • Minimum of five years of progressively responsible supervisory or management experience in one or more of the following: Community transportation Paratransit Demand-response transportation Public transportation Logistics Fleet management a closely related transportation field, • Demonstrated experience with: Transportation operations Employee supervision Customer service Scheduling Dispatching Fleet operations Regulatory compliance Personnel management, • Strong leadership and employee-management skills., • Ability to manage multiple operational priorities in a fast-paced environment., • Strong written and verbal communication skills., • Strong problem-solving and decision-making ability., • Ability to work effectively with drivers, dispatchers, customers, management, vendors, and community partners., • Strong organizational and time-management skills., • Ability to support operational improvements and maintain consistent service performance.Work Environment, • Position is full-time and on-site., • Role will involve work in office, dispatch, vehicle, and transportation operating environments., • Must be able to respond to operational issues and changing service needs throughout the workday., • Additional availability may be required based on operational needs, emergencies, or service disruptions.Why Join Our Team? This role provides the opportunity to help lead a major paratransit operation while directly influencing employee performance, customer service, operational efficiency, and service reliability. If you have significant transportation management experience and enjoy leading fast-paced operations, we encourage you to apply and join First Student. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description Who we are at Osmo: Osmo is a digital olfaction company, on a mission to give computers a sense of smell to improve the health and wellbeing of human life. Why? Our sense of smell both enriches and saves lives, and has a deep and direct connection to our emotions and memory. Olfactory Intelligence has applications across industries including fragrance, manufacturing, security, medicine, and more. We believe in the power of automation and thoughtfully applied AI/ML to solve problems beyond the reach of human intuition alone. We're headquartered in Elizabeth, NJ, with an additional office in Somerville, MA. We provide complimentary shuttle service from Brooklyn and Newark, NJ. About the Role Osmo's QC function is being built from the ground up, and this seat is where day-to-day quality judgment lives. You'll run testing and sampling on raw materials coming in and finished fragrance going out, using real fragrance-industry judgment that automated testing alone can't provide. You'll have the standing to make real-time accept/reject calls independently, and the experience to step in and cover QC decisions when the QC Manager is out. What You'll Do: Judge incoming raw material results from automated testing, deciding when an out-of-spec reading is a real defect versus normal variation in a natural material Apply trained olfactive judgment to evaluate raw materials and finished goods using sensory skill the equipment can't replicate Run triangulation testing on outgoing product to confirm it matches prior batches before it reaches a customer Make accept/reject calls in real time, multiple times a day, escalating only genuinely ambiguous cases to the QC Manager Step in and cover QC sign-off when the QC Manager is unavailable, keeping finished-goods flow moving rather than stalling Maintain and run lab instrumentation (GC/MS, photosampler, flash point testing, colorimeters), including calibration checks and upkeep Maintain audit-ready lab records: test logs, certificates of analysis, and equipment records Mentor QC Tech staff on fragrance-specific testing and olfactive judgment Partner across the floor with Purchasing, Warehouse, Shipping/Receiving, and Fragrance Development on sample flow and testing turnaround Who You Are: Fragrance industry experience or exposure required — adjacent industries (coffee, beer, wine, alcohol roasting, flavor, cosmetics, specialty chemicals) don't clear the bar Comfortable making high-frequency accept/reject calls independently, without over-escalating routine judgment Trained nose — sensory and olfactive evaluation skill specific to fragrance raw materials and finished goods Strong hands-on experience with lab instrumentation; GC/GCMS familiarity is a plus, not a requirement Strong documentation habits Comfortable stepping into a QC decision-making role in the Manager's absence Technical degree preferred (Chemistry, Chemical Engineering, or related); equivalent hands-on fragrance-industry lab experience accepted in place of a degree On-site in Elizabeth, NJ, 5 days a week What We Offer: Real Growth Path — A senior technician track with real, independent QC decision-making authority, inside a quality function being built from the ground up Catered Lunch — Mon/Wed/Fri; Newark, NJ and Brooklyn shuttles 401(k) savings plan and employer match Competitive salary and meaningful equity in a high-growth company Flexible PTO and paid family leave Commuter benefits (pre-tax transit and parking) If this role inspires you we’d encourage you to apply. We are committed to recruiting, developing, and retaining an incredible team optimized for a diversity of thought, background, and approaches. For all Full-Time Employees, compensation is just one component of Osmo’s total rewards approach, which is designed to support the well-being, growth, and long-term success of our team members. Depending on the role, this may include base salary or contract-based pay, along with access to health, dental, and vision coverage; a 401(k) retirement savings plan with company match; flexible paid time off and company holidays; and equity or incentive compensation for eligible roles. Actual compensation will vary based on factors such as experience, skills, location, internal equity, and other relevant business considerations. Osmo regularly reviews pay ranges and compensation structures to ensure they remain competitive, equitable, and aligned with current market data. All employment decisions and responsibilities are determined based on current ability and your ability to grow, without regard to race, color, gender identity, sex, sexual orientation, religion, age, marital status, physical, mental, or sensory disability, or any other characteristic protected by applicable law. Recruitment & Staffing Agencies: Osmo does not accept unsolicited resumes from any source other than candidates. The submission of unsolicited resumes by recruitment or staffing agencies to Osmo or its employees is strictly prohibited unless contacted directly by the Osmo Talent Acquisition team. Any resume submitted by an agency in the absence of a signed agreement will automatically become the property of Osmo and Osmo will not owe any referral or other fees with respect thereto. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire Compensation Range: $80K - $100K

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility, • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! Calibration Technician I is an entry-level position that requires either education in the electronics/calibration field or at least one (1) year of calibration experience. Calibration Technicians at this level typically can calibrate low-end process instrumentation in up to three (3) disciplines (e.g., Electrical, Dimensional or Pressure). Proficiency and expertise are determined in accordance with Transcat’s technician skills progression matrix. Responsibilities Essential Duties and Responsibilities • Work with other technicians within the lab to learn calibration fundamentals, which can include measurement, temperature, electronics, etc., • Identify and utilize appropriate measurement techniques, • Maintain calibration standards, • Working knowledge and competency in at least three 3 disciplines (dimensional, electrical, torque, temperature, pressure, etc.), • Perform calibration work within a laboratory setting and/or while supervised at a customer on-site, • Fulfill duties safely under working conditions, in keeping with Company requirements and standards, • Other duties as assigned, • Travel requirement: 25-50% of work schedule Primary Objectives • Learn fundamental calibration skills and techniques, • Develop skills necessary to perform calibrations independently, • Develop skills necessary to advance to Calibration Technician II position, which includes a working knowledge and competency in at least four (4) disciplines and expert competency in one (1) discipline, • Deliver on Transcat’s Quality Policy (QAC-F01-001) Qualifications Required Knowledge, Skills, Abilities, and Qualifications • Successful completion of assigned training materials through on-the-job training, online content, LMS, and classroom led instruction, • Strong interpersonal and customer service skills, • Excellent attention to detail, • Self-motivated learner with the ability to learn new skills related to calibration and calibration processes, • Ability to take direction and learn from feedback, • Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team, • 3+ years driving experience with a valid driver’s license and acceptable driver history Education and Experience Required: Associates degree from college or technical school; or at least one (1) year related experience and/or training. or equivalent combination of education and experience Preferred: • Previous experience or training in electronics or machining, • Basic mathematical skills including algebra, geometry, and statistics, • Familiarity with basic hand tools, • Proficiency with Microsoft Office computer software including Word, Excel, and Outlook, • Organizational and time management skills, • Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics Physical Demands The physical demands described here are representative of the physical requirements necessary for an employee to successfully perform the essential functions of this job. We will reasonably accommodate individuals with disabilities to perform the essential functions of the position. While performing the responsibilities of the job, the employee is required to read, write, talk, and hear. The employee is often required to sit and use their hands and fingers to handle tools and equipment. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Occasionally will be required to lift up to 75 lbs. Work Environment The work environment described here is representative of what an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; and vibration. The noise level in the work environment is usually moderate. Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Job Description Who we are at Osmo: Osmo is a digital olfaction company, on a mission to give computers a sense of smell to improve the health and wellbeing of human life. Why? Our sense of smell both enriches and saves lives, and has a deep and direct connection to our emotions and memory. Olfactory Intelligence has applications across industries including fragrance, manufacturing, security, medicine, and more. We believe in the power of automation and thoughtfully applied AI/ML to solve problems beyond the reach of human intuition alone. We're headquartered in Elizabeth, NJ, with an additional office in Somerville, MA. We provide complimentary shuttle service from Brooklyn and Newark, NJ. About the Role Osmo's QC function is being built from the ground up, and this seat is where day-to-day quality judgment lives. You'll run testing and sampling on raw materials coming in and finished fragrance going out, using real fragrance-industry judgment that automated testing alone can't provide. You'll have the standing to make real-time accept/reject calls independently, and the experience to step in and cover QC decisions when the QC Manager is out. What You'll Do: Judge incoming raw material results from automated testing, deciding when an out-of-spec reading is a real defect versus normal variation in a natural material Apply trained olfactive judgment to evaluate raw materials and finished goods using sensory skill the equipment can't replicate Run triangulation testing on outgoing product to confirm it matches prior batches before it reaches a customer Make accept/reject calls in real time, multiple times a day, escalating only genuinely ambiguous cases to the QC Manager Step in and cover QC sign-off when the QC Manager is unavailable, keeping finished-goods flow moving rather than stalling Maintain and run lab instrumentation (GC/MS, photosampler, flash point testing, colorimeters), including calibration checks and upkeep Maintain audit-ready lab records: test logs, certificates of analysis, and equipment records Mentor QC Tech staff on fragrance-specific testing and olfactive judgment Partner across the floor with Purchasing, Warehouse, Shipping/Receiving, and Fragrance Development on sample flow and testing turnaround Who You Are: Fragrance industry experience or exposure required — adjacent industries (coffee, beer, wine, alcohol roasting, flavor, cosmetics, specialty chemicals) don't clear the bar Comfortable making high-frequency accept/reject calls independently, without over-escalating routine judgment Trained nose — sensory and olfactive evaluation skill specific to fragrance raw materials and finished goods Strong hands-on experience with lab instrumentation; GC/GCMS familiarity is a plus, not a requirement Strong documentation habits Comfortable stepping into a QC decision-making role in the Manager's absence Technical degree preferred (Chemistry, Chemical Engineering, or related); equivalent hands-on fragrance-industry lab experience accepted in place of a degree On-site in Elizabeth, NJ, 5 days a week What We Offer: Real Growth Path — A senior technician track with real, independent QC decision-making authority, inside a quality function being built from the ground up Catered Lunch — Mon/Wed/Fri; Newark, NJ and Brooklyn shuttles 401(k) savings plan and employer match Competitive salary and meaningful equity in a high-growth company Flexible PTO and paid family leave Commuter benefits (pre-tax transit and parking) If this role inspires you we’d encourage you to apply. We are committed to recruiting, developing, and retaining an incredible team optimized for a diversity of thought, background, and approaches. For all Full-Time Employees, compensation is just one component of Osmo’s total rewards approach, which is designed to support the well-being, growth, and long-term success of our team members. Depending on the role, this may include base salary or contract-based pay, along with access to health, dental, and vision coverage; a 401(k) retirement savings plan with company match; flexible paid time off and company holidays; and equity or incentive compensation for eligible roles. Actual compensation will vary based on factors such as experience, skills, location, internal equity, and other relevant business considerations. Osmo regularly reviews pay ranges and compensation structures to ensure they remain competitive, equitable, and aligned with current market data. All employment decisions and responsibilities are determined based on current ability and your ability to grow, without regard to race, color, gender identity, sex, sexual orientation, religion, age, marital status, physical, mental, or sensory disability, or any other characteristic protected by applicable law. Recruitment & Staffing Agencies: Osmo does not accept unsolicited resumes from any source other than candidates. The submission of unsolicited resumes by recruitment or staffing agencies to Osmo or its employees is strictly prohibited unless contacted directly by the Osmo Talent Acquisition team. Any resume submitted by an agency in the absence of a signed agreement will automatically become the property of Osmo and Osmo will not owe any referral or other fees with respect thereto. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire Compensation Range: $80K - $100K

Job Description Who we are at Osmo: Osmo is a digital olfaction company, on a mission to give computers a sense of smell to improve the health and wellbeing of human life. Why? Our sense of smell both enriches and saves lives, and has a deep and direct connection to our emotions and memory. Olfactory Intelligence has applications across industries including fragrance, manufacturing, security, medicine, and more. We believe in the power of automation and thoughtfully applied AI/ML to solve problems beyond the reach of human intuition alone. We're headquartered in Elizabeth, NJ, with an additional office in Somerville, MA. We provide complimentary shuttle service from Brooklyn and Newark, NJ. About the Role Osmo's QC function is being built from the ground up, and this seat is where day-to-day quality judgment lives. You'll run testing and sampling on raw materials coming in and finished fragrance going out, using real fragrance-industry judgment that automated testing alone can't provide. You'll have the standing to make real-time accept/reject calls independently, and the experience to step in and cover QC decisions when the QC Manager is out. What You'll Do: Judge incoming raw material results from automated testing, deciding when an out-of-spec reading is a real defect versus normal variation in a natural material Apply trained olfactive judgment to evaluate raw materials and finished goods using sensory skill the equipment can't replicate Run triangulation testing on outgoing product to confirm it matches prior batches before it reaches a customer Make accept/reject calls in real time, multiple times a day, escalating only genuinely ambiguous cases to the QC Manager Step in and cover QC sign-off when the QC Manager is unavailable, keeping finished-goods flow moving rather than stalling Maintain and run lab instrumentation (GC/MS, photosampler, flash point testing, colorimeters), including calibration checks and upkeep Maintain audit-ready lab records: test logs, certificates of analysis, and equipment records Mentor QC Tech staff on fragrance-specific testing and olfactive judgment Partner across the floor with Purchasing, Warehouse, Shipping/Receiving, and Fragrance Development on sample flow and testing turnaround Who You Are: Fragrance industry experience or exposure required — adjacent industries (coffee, beer, wine, alcohol roasting, flavor, cosmetics, specialty chemicals) don't clear the bar Comfortable making high-frequency accept/reject calls independently, without over-escalating routine judgment Trained nose — sensory and olfactive evaluation skill specific to fragrance raw materials and finished goods Strong hands-on experience with lab instrumentation; GC/GCMS familiarity is a plus, not a requirement Strong documentation habits Comfortable stepping into a QC decision-making role in the Manager's absence Technical degree preferred (Chemistry, Chemical Engineering, or related); equivalent hands-on fragrance-industry lab experience accepted in place of a degree On-site in Elizabeth, NJ, 5 days a week What We Offer: Real Growth Path — A senior technician track with real, independent QC decision-making authority, inside a quality function being built from the ground up Catered Lunch — Mon/Wed/Fri; Newark, NJ and Brooklyn shuttles 401(k) savings plan and employer match Competitive salary and meaningful equity in a high-growth company Flexible PTO and paid family leave Commuter benefits (pre-tax transit and parking) If this role inspires you we’d encourage you to apply. We are committed to recruiting, developing, and retaining an incredible team optimized for a diversity of thought, background, and approaches. For all Full-Time Employees, compensation is just one component of Osmo’s total rewards approach, which is designed to support the well-being, growth, and long-term success of our team members. Depending on the role, this may include base salary or contract-based pay, along with access to health, dental, and vision coverage; a 401(k) retirement savings plan with company match; flexible paid time off and company holidays; and equity or incentive compensation for eligible roles. Actual compensation will vary based on factors such as experience, skills, location, internal equity, and other relevant business considerations. Osmo regularly reviews pay ranges and compensation structures to ensure they remain competitive, equitable, and aligned with current market data. All employment decisions and responsibilities are determined based on current ability and your ability to grow, without regard to race, color, gender identity, sex, sexual orientation, religion, age, marital status, physical, mental, or sensory disability, or any other characteristic protected by applicable law. Recruitment & Staffing Agencies: Osmo does not accept unsolicited resumes from any source other than candidates. The submission of unsolicited resumes by recruitment or staffing agencies to Osmo or its employees is strictly prohibited unless contacted directly by the Osmo Talent Acquisition team. Any resume submitted by an agency in the absence of a signed agreement will automatically become the property of Osmo and Osmo will not owe any referral or other fees with respect thereto. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire Compensation Range: $80K - $100K

Job Description Everleap Fertility is currently seeking an Andrology Lab Technician to join our Jersey City, NJ location! This is a full-time position Monday-Friday 5:30am-1:30pm with rotating weekend and holiday coverage in Basking Ridge, NJ. As an Andrology Laboratory Technician, you will play an important role in helping individuals and families achieve their dreams of parenthood. Working alongside fertility specialists and laboratory professionals, you will perform Andrology and Endocrine laboratory testing while maintaining the highest standards of quality, accuracy, and patient care. The Andrology Laboratory Technician follows the laboratory’s procedures for specimen handling and processing, reporting and maintaining records of patient test results. Attention to detail is essential with these duties. The Andrology Lab Tech will be responsible for serving patients by providing precise and accurate laboratory results for the purpose of infertility assessment and management. This role is responsible for performing Andrology and Endocrine laboratory services in accordance with the Laboratory Procedure Manual. Essential Functions and Accountabilities: • Maintains accurate and current records of patient reports and inventory., • Adheres to the laboratory’s quality control policies; documents all quality control activities, as well as all instrument and procedural calibrations and maintenance performed., • Follows the laboratory’s policies and procedures whenever test systems are not within the laboratory’s established, acceptable levels of performance., • Studies and remains current and knowledgeable with the Laboratory Operating Manual regarding quality assurance, quality control, safety procedures and operating guidelines for performing all assigned laboratory services., • Holds a comprehensive understanding of and follow all OSHA requirements for safe laboratory operations to maintain a safe laboratory environment., • Assures quality care by adhering to therapeutic standards; follows practice, physician and laboratory division philosophies, as well as standards of care set by the state and other governing agency regulations., • Works cooperatively with the Company multidisciplinary teams to provide good patient care and achieves the objectives and goals of the practice., • Maintains patient confidence and protect operations by keeping all patient and proprietary information confidential. Adheres to signed HIPAA Confidentiality Agreement. Academic Training: • Bachelor’s Degree in a chemical, biological, clinical laboratory science or related – required Position Requirements/Experience: • Minimum 6 months’ laboratory training towards degree or experience in a clinical or research lab – preferred Technical Skills: • Electronic Medical Records experience - preferred, • Excel at Microsoft Office Suites (Word, Excel, Power Point, Outlook), • Ability to operate laboratory equipment, hormone analyzers and microscopes Everleap Fertility offers a comprehensive benefits package to all employees who work a minimum of 30 hours per week. • Medical, Dental, Vision Insurance Options, • Retirement 401K Plan, • Paid Time Off & Paid Holidays, • Company Paid: Life Insurance & Long-Term Disability & AD&D, • Flexible Spending Accounts, • Employee Assistance Program, • Tuition Reimbursement Everleap Fertility: Built on the legacy of RMA, Boston IVF, Conceptions, and six other leading North American fertility practices, Everleap Fertility brings together more than 200 physicians and embryologists across 60+ locations in the U.S., including 25 IVF laboratories focused on the next leap forward in reproductive medicine. Together, we have helped hundreds of thousands of patients build families for more than 40 years. As part of IVI Institute, Everleap Fertility contributes to a global community working together to advance the field and bring progress in reproductive medicine into patient care. Equal Employment Opportunity Statement Everleap Fertility is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Everleap Fertility is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Everleap Fertility are based on business needs, job requirements and individual qualifications, without regard to race, color, religion and/or belief, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Everleap Fertility will not tolerate discrimination or harassment based on any of these characteristics. Everleap Fertility encourages applicants of all ages. Monday-Friday 5:30am-1:30pm with rotating weekends and holidays

Job Description Join Our Growing Ophthalmology Team as an Ophthalmic Technician! Hours: Up to 40 per week Mon-Fri 9a.m. - 5p.m. Rotating Saturdays Our established multi-specialty Ophthalmology group is seeking a skilled professional to join our friendly and dedicated team. If you're passionate about providing exceptional patient care and eager to grow in a supportive environment, we want to hear from you! Your Impact: • Elevate patient care: Work closely with our ophthalmologists to gather comprehensive patient information, ensuring accurate diagnoses and personalized treatment plans., • Master ophthalmic testing: Conduct thorough preliminary examinations, including visual acuity, pupillary responses, and more., • Perform advanced diagnostics: Administer a range of diagnostic tests, such as OCT, perimetry, and ophthalmic photography., • Assist in surgical procedures: Support ophthalmologists during minor surgeries, laser procedures, and crosslinking., • Streamline patient flow: Efficiently manage patient flow in clinic and imaging rooms, collaborating with clinical staff., • Administer eye drops: (Certification Required), • Contribute to clinic efficiency: Perform clinical and administrative tasks, ensuring a smooth and organized workflow. What You'll Bring/Requirements: • A passion for patient care and a commitment to excellence., • Exceptional attention to detail and strong organizational skills., • Excellent communication and interpersonal abilities., • Ability to thrive in a fast-paced, team-oriented environment., • Proven experience as an Ophthalmic Technician., • Knowledge of medical office procedures., • Ability to perform indirect activities, administrative tasks and any other assigned duties that contribute to the efficient & high-quality performance of the medical practice., • High School Diploma or equivalent. Bonus Points: • Certified Ophthalmic Assistant (COA) Certification. Key Skills: • Reliability and a strong work ethic., • Ability to work collaboratively with a diverse team., • Proficiency in data entry and typing., • Outstanding customer service skills. We Care: We prioritize patients, colleagues, and families with compassionate, leading care and treat all with dignity and respect. We Collaborate: We work together with patients, seeking diverse input to share and grow innovative ideas. We Elevate: Committed to excellence, we exceed expectations by delivering leading eye care research, innovation, education, and outreach. Refocus is an equal opportunity employer and we value diversity.

Job DescriptionBenefits: • 401(k), • Employee discounts, • Health insurance, • Paid time off Benefits/Perks • Competitive Compensation, • Great Work Environment Job Summary We are seeking an Ophthalmic Technician to join our team! As an Ophthalmic Technician, you will be responsible for conducting the initial assessment of a patient, including listening to their complaints or concerns, obtaining a relevant medical history, visual acuities, and more. You will also assist as needed with procedures done by the doctor in-office, help educate patients on eye health and best practices, and maintain an organized, clean work environment at all times. The ideal candidate has strong attention to detail, exceptional customer service skills, and is extremely organized. Responsibilities • Greet patients and gather medical history and relevant information for their visit, • Conduct an initial assessment of the patient and record all findings, • Assist in in-office procedures, as needed, • Educate patients on best practice and eye health, • Maintain a clean, organized workspace at all timesQualifications, • Previous customer service experience desired, • Strong customer service skills, • Excellent organizational skills, • Excellent attention to detail, • Familiarity with basic computer programs, such as the Microsoft Office suite, • English, Portuguese and or Spanish required, • Must not be in school as this position is 8am-4pm and till 6pm 1 Wednesday a month

Job Description This position is being recruited in support of a pending Essex County paratransit contract opportunity. Employment is contingent upon First Student being awarded the contract. Candidates may be contacted and interviewed prior to the contract award; however, an employment start date will not be confirmed until the award and implementation timeline are finalized. Safety ManagerWhy First Student? At First Student, safety is the foundation of everything we do. Our Safety Managers work directly with drivers, operations leaders, and employees to strengthen safety performance, improve training, and ensure our transportation services meet regulatory and company standards. This position will support the Essex County Paratransit operation, a 47-vehicle community transportation program serving passengers throughout the area. About the Role The Safety Manager is responsible for overseeing driver safety, training, regulatory compliance, accident investigation, and ongoing employee development for the Essex County Paratransit operation. This role provides hands-on safety leadership and driver instruction while supporting safe, compliant, and professional transportation service. The successful candidate will bring significant experience in transportation safety and driver training, along with a strong understanding of paratransit operations, defensive driving, ADA transportation requirements, and passenger assistance. What You'll Do • Lead and support the location's safety and driver training programs., • Provide initial, refresher, remedial, and ongoing training to drivers and transportation employees., • Conduct behind-the-wheel driver instruction and safety evaluations., • Train employees on defensive driving techniques and safe vehicle operation., • Provide instruction on passenger assistance techniques and proper passenger securement procedures., • Train employees on ADA transportation requirements and accessibility standards., • Conduct accident and safety-event investigations and maintain appropriate documentation., • Identify safety trends and recommend corrective actions to reduce risk and improve performance., • Coach drivers and employees following safety events, observations, or performance concerns., • Monitor driver performance and compliance with established safety standards., • Support employee qualification and regulatory compliance requirements., • Maintain required safety, training, and driver documentation., • Assist with safety meetings, employee development, and ongoing safety initiatives., • Work closely with operations leadership to address safety concerns and improve overall performance., • Promote a strong safety culture throughout the Essex County Paratransit operation., • Perform additional safety, training, and operational responsibilities as required.What You'll Bring, • Minimum of five years of progressively responsible experience in one or more of the following: Transportation safety Driver training Community transportation Paratransit operations Public transportation Commercial vehicle operations or a closely related transportation field, • Demonstrated experience with: Driver instruction Accident investigation Safety management Regulatory compliance Defensive driving Passenger assistance techniques ADA transportation requirements Employee training, • Strong communication and presentation skills., • Ability to effectively coach and train employees with varying levels of experience., • Strong organizational and documentation skills., • Ability to identify safety concerns and implement appropriate corrective action., • Ability to work collaboratively with drivers, operations leadership, customers, and regulatory partners.Required License, • Must possess and maintain a valid New Jersey Commercial Driver License (CDL)., • Must maintain an acceptable driving record and remain qualified to operate applicable company vehicles.Work Environment, • Position is full-time and on-site., • Role will involve work in office, classroom, vehicle, and transportation operating environments., • Must be able to conduct behind-the-wheel training and driver evaluations., • Must be able to work in and around paratransit vehicles and transportation facilities., • Some outdoor work may be required in varying weather conditions.Why Join Our Team? This position offers the opportunity to directly influence driver performance, passenger safety, employee development, and the overall success of a 47-vehicle paratransit operation. If you have extensive transportation safety and driver-training experience and are committed to building a strong safety culture, we encourage you to apply and join First Student. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description Company Overview Haddad Plumbing and Heating Inc. has Been in Business for 25 Years Servicing New Jersey, New York City, and Westchester County in Mid-Rise and High-Rise buildings with Exceptional Work and a Proven Track Record. This is a Terrific Opportunity for a Well Organized and Outgoing Individual to have a Great Career in a Great Industry. Summary The Service Manager is responsible for managing the day-to-day sales, budget, operations and customer service experience for the company’s technician team. Essential Functions • Achieve service department sales and profitability goals., • Respond to operational, employee, and customer issues promptly and efficiently., • Review and process all invoices accurately and timely., • Develop and manage service inventory policies, levels, and pricing to meet company goals for vehicles and warehouses., • Manage seasonal fluctuations by promoting and scheduling routine maintenance., • Propose, maintain, and administer the service technician commission plan., • Conduct periodic ride-alongs to ensure adherence to procedures and techniques and maximize customer service., • Lead and coach team members, providing necessary training, knowledge, and information for peak performance, continuous improvement, and a positive work environment aligned with company objectives., • Coordinate tactical and technical training for technician and employee development., • Adjust manpower allocation daily based on customer demand and the approved schedule., • Address customer complaints and satisfaction issues promptly., • Inspect trucks and enforce dress code compliance., • Visit job sites to gather information for proposal preparation according to company guidelines., • Perform other duties as assigned by upper management.Qualifications:, • Bachelor's degree or a high school diploma with 10+ years of experience., • 5+ years of experience in the HVAC/Plumbing industry., • 3+ years of management experience., • Proficiency in Microsoft Office., • Strong verbal and written communication skills., • Valid driver's license with a clean driving record (must provide current abstract). Powered by JazzHR 1ir116NLMc

Job DescriptionDescription: Software Support Technician - Entry Level Iselin New Jersey Software Support Technician- Entry Level WHO WE ARE: Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Staten Island, New York, as well as additional satellite offices in Georgia, Oklahoma, Texas and California. Celerant's staff consists of several departments including Marketing, Sales, Development, Quality Assurance Testing, Hardware, Implementation and Training, and Technical Support. For more information, visit us at www.celerant.com. The ideal Technical Support candidate should be detailed orientated, possess the ability to work effectively with co-workers and end users, and exhibit outstanding customer service skills. RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus. Requirements: RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus.

Job DescriptionDescription: Technical Support Technician WHO WE ARE: Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Staten Island, New York, as well as additional satellite offices in Georgia, Oklahoma, Texas and California. Celerant's staff consists of several departments including Marketing, Sales, Development, Quality Assurance Testing, Hardware, Implementation and Training, and Technical Support. For more information, visit us at www.celerant.com. The ideal Technical Support candidate should be detailed orientated, possess the ability to work effectively with co-workers and end users, and exhibit outstanding customer service skills. The position responsibilities include, but are not limited to the following: · Answer telephone calls and or e-mails from customers. Collect appropriate information from customer regarding questions or problems and open Tickets in Ticketing System. · Use SQL server programming to diagnose and solve customer issues · Coordinate with development with strategies to resolve software issues · Use active troubleshooting to resolve hardware or software issues within specified time frames. Document action take, escalate call if necessary · Contact customers to follow up on outstanding issues. Assist with resolution · Coordinate return of merchandise in need of repair, if needed. · Assist with documentation regarding bugs, new products or new solutions. · Other duties as assigned by manager · Advises upper management on product development issues arising from product problems identified through technical support calls with customers. · Develops and implements plans to acclimate existing customer base and introduce new accounts. · Escalate customers expressing a high level of dissatisfaction and work with escalated team. *Please note that your daily duties can change upon the Call Center Managers request to meet business needs. Requirements: The position responsibilities include, but are not limited to the following: · Answer telephone calls and or e-mails from customers. Collect appropriate information from customer regarding questions or problems and open Tickets in Ticketing System. · Use SQL server programming to diagnose and solve customer issues · Coordinate with development with strategies to resolve software issues · Use active troubleshooting to resolve hardware or software issues within specified time frames. Document action take, escalate call if necessary · Contact customers to follow up on outstanding issues. Assist with resolution · Coordinate return of merchandise in need of repair, if needed. · Assist with documentation regarding bugs, new products or new solutions. · Other duties as assigned by manager · Advises upper management on product development issues arising from product problems identified through technical support calls with customers. · Develops and implements plans to acclimate existing customer base and introduce new accounts. · Escalate customers expressing a high level of dissatisfaction and work with escalated team.

Job Description Our client is a boiler, burner, and water heater service company serving commercial and residential customers across northern New Jersey. Our reputation is built on getting a technician to the customer quickly and making sure that technician arrives with the right part on the truck. We are hiring a Service and Inventory Manager to own both halves of that equation. This is a hands-on leadership role that sits between the field and the warehouse. On any given morning you will be dispatching technicians to service calls, walking a technician through a no-heat diagnosis over the phone, pulling parts for the next installation, and placing an order with a supplier before stock runs thin. The person who succeeds here is a heating professional first and an administrator second: someone who knows what a low-water cutoff does, knows which circulator the shop tends to burn through, and knows how to keep a crew organized without micromanaging it. You will directly supervise the field service team and carry full responsibility for the parts and equipment inventory that keeps them productive. It is a role with real authority over scheduling, purchasing, and stocking decisions, and real accountability for response times, first-visit completion rates, and inventory accuracy. KEY RESPONSIBILITIES Team and Service Management You will run daily operations for the service department and act as the primary technical resource for the field. • Direct daily operations for the service technician team, including start-of-day assignments and end-of-day close-out., • Schedule and dispatch repair, maintenance, and installation jobs, balancing emergency calls against planned work., • Serve as the escalation point for technical troubleshooting on boilers, burners, and water heaters, supporting technicians by phone or on site as needed., • Coach and develop technicians on diagnostic technique, workmanship standards, and customer interaction., • Coordinate with customers and office staff on job status, timelines, and follow-up work., • Enforce safety practices and code compliance across all field work. Inventory Control and Procurement You will own the parts and equipment inventory end to end, from stocking levels to what goes on the truck each morning. • Track stock levels of boiler parts, burner components, water heaters, fittings, controls, and tools., • Procure material and equipment for immediate jobs as well as for shelf stock, working with suppliers on pricing, availability, and lead times., • Order replacement parts and equipment and track open orders through to receipt., • Stage and prepare material and equipment for field technicians ahead of scheduled jobs., • Conduct regular physical inventory counts and reconcile against system records., • Prevent stock shortages on high-turn items while reducing waste, obsolescence, and overstock., • Maintain an organized, well-labeled warehouse and shop area. Requirements Required • Working technical knowledge of hydronic and steam heating systems, including boilers, burners, water heaters, controls, and related piping., • Prior experience supervising, leading, or coordinating a field service or trades team., • Demonstrated experience tracking inventory, purchasing parts, or managing stock in a service, distribution, or contracting environment., • Strong interpersonal and communication skills, with the ability to work effectively with technicians, customers, and vendors., • Organized and detail-oriented, able to manage competing priorities in a fast-moving service environment., • Comfortable with scheduling, dispatch, and inventory software, and with basic spreadsheet work., • Valid driver's license and a clean driving record. Preferred • Five or more years in the boiler, burner, HVAC, or plumbing trades, with a background as a service technician., • New Jersey Black Seal low-pressure boiler operator license, HVACR license, or comparable trade certification., • Experience with commercial boiler and burner service in addition to residential work., • Familiarity with northern New Jersey supply houses and manufacturer distribution channels., • Experience establishing min/max stocking levels or reorder points. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Compensation: $80,000 - 90,000

Job DescriptionDescription: The Technician is responsible for performing high-quality repairs, maintenance, and inspections on aviation components in compliance with OEM technical publications and Unilode’s operational standards. This role ensures safety, efficiency, and compliance within Unilode’s MRO (Maintenance, Repair, and Overhaul) facilities, contributing to smooth station operations and meeting production targets. Key Responsibilities: Perform High-Quality Repairs and Maintenance Customer Focus, Collaborate • Conduct repairs in accordance with OEM technical publications and company MOE., • Identify and complete additional maintenance (re-work) requirements as needed., • Maintain compliance with company procedures, aviation regulations, and safety standards. Support Operational Efficiency and Compliance Courage, Collaborate • Ensure accurate record-keeping of maintenance activities and promptly report discrepancies., • Maintain tools, equipment, and workspaces to operational and safety standards., • Assist with continuous improvement initiatives aimed at enhancing efficiency. Achieve Production and Quality Targets Ensure Accountability, Drive Results • Follow work orders and technical documentation with a high degree of accuracy., • Support quality assurance and inspection processes to maintain Unilode’s repair standards., • Work collaboratively to meet production targets while ensuring safety and compliance. General Duties and Station Support Collaborate, Customer Focus • Assist in ancillary tasks, including cleaning and maintaining containers or pallets., • Perform administrative duties related to repair tracking and documentation., • Support special projects or other assigned tasks to ensure smooth station operations. Our Values in Action: • Be Humble and Curious – Continuously seek improvements in repair and maintenance practices., • Inspire, Empower, and Prosper – Work collaboratively to ensure safe and efficient operations., • Take Ownership and Get Stuff Done – Deliver high-quality repairs on time., • Build a Better Future – Contribute to process improvements and technical innovation., • Team Up to Be Better – Support colleagues and collaborate across MRO facilities., • Be Passionate About Our Customers – Maintain a high standard of service and repair quality., • Be Eager to Win – Meet production targets and exceed customer expectations. The Small Print: This role requires flexibility in working hours, including weekend and evening shifts. The ability to lift, pull, and push weights exceeding 65 lbs is necessary for daily tasks. Strict adherence to aviation safety regulations and quality standards is essential to maintain operational excellence. This is an overview of the role’s scope and its alignment with Unilode’s competencies and values. It is not an exhaustive list of responsibilities but serves as a guide to the key expectations and contributions of the position. Flexibility may be required to adapt to business needs. Please note successful applicants who perform or carry out (or are available to perform) a sensitive safety aviation activity (SSAA) can be tested for drugs and alcohol without notice or as part of pre employment checks. We are an Equal Opportunities Employer and are committed to creating an inclusive environment for all employees. We celebrate diversity and welcome applications from suitably qualified candidates regardless of age, disability, gender identity, marriage or civil partnership status, pregnancy and maternity, race, religion or belief, sex, sexual orientation, or any other characteristic protected by applicable law. Requirements: Skills and Experience Required: • High School Diploma or other relevant qualifications would be beneficial., • Knowledge of aviation maintenance regulations and quality systems., • Ability to read technical publications, drawings, and work orders., • Strong attention to detail and ability to follow processes., • Basic proficiency in Microsoft Office and inventory tracking tools. Notice of AI Use in Job Application Review As part of our commitment in creating a fair, efficient, and consistent hiring process we may use artificial intelligence (AI) to help our recruiting teams organize, summarize, and analyze information provided by candidates, including resumes, application responses, and other materials submitted during the application process.AI may be used to identify patterns, highlight relevant skills, and experience, and assist in comparing a candidate’s qualifications with the requirement of a specific role. These tools are to improve efficiency and consistency while supporting more informed hiring decisions, which will ultimately be made by the hiring team.

Job Description Who we are at Osmo: Osmo is a digital olfaction company, on a mission to give computers a sense of smell to improve the health and wellbeing of human life. Why? Our sense of smell both enriches and saves lives, and has a deep and direct connection to our emotions and memory. Olfactory Intelligence has applications across industries including fragrance, manufacturing, security, medicine, and more. We believe in the power of automation and thoughtfully applied AI/ML to solve problems beyond the reach of human intuition alone. We're headquartered in Elizabeth, NJ, with an additional office in Somerville, MA. We provide complimentary shuttle service from Brooklyn and Newark, NJ. About the Role Osmo's QC function is being built from the ground up, and this seat is where day-to-day quality judgment lives. You'll run testing and sampling on raw materials coming in and finished fragrance going out, using real fragrance-industry judgment that automated testing alone can't provide. You'll have the standing to make real-time accept/reject calls independently, and the experience to step in and cover QC decisions when the QC Manager is out. What You'll Do: Judge incoming raw material results from automated testing, deciding when an out-of-spec reading is a real defect versus normal variation in a natural material Apply trained olfactive judgment to evaluate raw materials and finished goods using sensory skill the equipment can't replicate Run triangulation testing on outgoing product to confirm it matches prior batches before it reaches a customer Make accept/reject calls in real time, multiple times a day, escalating only genuinely ambiguous cases to the QC Manager Step in and cover QC sign-off when the QC Manager is unavailable, keeping finished-goods flow moving rather than stalling Maintain and run lab instrumentation (GC/MS, photosampler, flash point testing, colorimeters), including calibration checks and upkeep Maintain audit-ready lab records: test logs, certificates of analysis, and equipment records Mentor QC Tech (L2) staff on fragrance-specific testing and olfactive judgment Partner across the floor with Purchasing, Warehouse, Shipping/Receiving, and Fragrance Development on sample flow and testing turnaround Who You Are: Fragrance industry experience or exposure required — adjacent industries (coffee, beer, wine, alcohol roasting, flavor, cosmetics, specialty chemicals) don't clear the bar Comfortable making high-frequency accept/reject calls independently, without over-escalating routine judgment Trained nose — sensory and olfactive evaluation skill specific to fragrance raw materials and finished goods Strong hands-on experience with lab instrumentation; GC/GCMS familiarity is a plus, not a requirement Strong documentation habits Comfortable stepping into a QC decision-making role in the Manager's absence Technical degree preferred (Chemistry, Chemical Engineering, or related); equivalent hands-on fragrance-industry lab experience accepted in place of a degree On-site in Elizabeth, NJ, 5 days a week What We Offer: Real Growth Path — A senior technician track with real, independent QC decision-making authority, inside a quality function being built from the ground up Catered Lunch — Mon/Wed/Fri; Newark, NJ and Brooklyn shuttles 401(k) savings plan and employer match Competitive salary and meaningful equity in a high-growth company Flexible PTO and paid family leave Commuter benefits (pre-tax transit and parking) If this role inspires you we’d encourage you to apply. We are committed to recruiting, developing, and retaining an incredible team optimized for a diversity of thought, background, and approaches. For all Full-Time Employees, compensation is just one component of Osmo’s total rewards approach, which is designed to support the well-being, growth, and long-term success of our team members. Depending on the role, this may include base salary or contract-based pay, along with access to health, dental, and vision coverage; a 401(k) retirement savings plan with company match; flexible paid time off and company holidays; and equity or incentive compensation for eligible roles. Actual compensation will vary based on factors such as experience, skills, location, internal equity, and other relevant business considerations. Osmo regularly reviews pay ranges and compensation structures to ensure they remain competitive, equitable, and aligned with current market data. All employment decisions and responsibilities are determined based on current ability and your ability to grow, without regard to race, color, gender identity, sex, sexual orientation, religion, age, marital status, physical, mental, or sensory disability, or any other characteristic protected by applicable law. Recruitment & Staffing Agencies: Osmo does not accept unsolicited resumes from any source other than candidates. The submission of unsolicited resumes by recruitment or staffing agencies to Osmo or its employees is strictly prohibited unless contacted directly by the Osmo Talent Acquisition team. Any resume submitted by an agency in the absence of a signed agreement will automatically become the property of Osmo and Osmo will not owe any referral or other fees with respect thereto. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire Compensation Range: $80K - $100K

Job Description Who we are at Osmo: Osmo is a digital olfaction company, on a mission to give computers a sense of smell to improve the health and wellbeing of human life. Why? Our sense of smell both enriches and saves lives, and has a deep and direct connection to our emotions and memory. Olfactory Intelligence has applications across industries including fragrance, manufacturing, security, medicine, and more. We believe in the power of automation and thoughtfully applied AI/ML to solve problems beyond the reach of human intuition alone. We're headquartered in Elizabeth, NJ, with an additional office in Somerville, MA. We provide complimentary shuttle service from Brooklyn and Newark, NJ. About the Role Osmo's QC function is being built from the ground up, and this seat is where day-to-day quality judgment lives. You'll run testing and sampling on raw materials coming in and finished fragrance going out, using real fragrance-industry judgment that automated testing alone can't provide. You'll have the standing to make real-time accept/reject calls independently, and the experience to step in and cover QC decisions when the QC Manager is out. What You'll Do: Judge incoming raw material results from automated testing, deciding when an out-of-spec reading is a real defect versus normal variation in a natural material Apply trained olfactive judgment to evaluate raw materials and finished goods using sensory skill the equipment can't replicate Run triangulation testing on outgoing product to confirm it matches prior batches before it reaches a customer Make accept/reject calls in real time, multiple times a day, escalating only genuinely ambiguous cases to the QC Manager Step in and cover QC sign-off when the QC Manager is unavailable, keeping finished-goods flow moving rather than stalling Maintain and run lab instrumentation (GC/MS, photosampler, flash point testing, colorimeters), including calibration checks and upkeep Maintain audit-ready lab records: test logs, certificates of analysis, and equipment records Mentor QC Tech staff on fragrance-specific testing and olfactive judgment Partner across the floor with Purchasing, Warehouse, Shipping/Receiving, and Fragrance Development on sample flow and testing turnaround Who You Are: Fragrance industry experience or exposure required — adjacent industries (coffee, beer, wine, alcohol roasting, flavor, cosmetics, specialty chemicals) don't clear the bar Comfortable making high-frequency accept/reject calls independently, without over-escalating routine judgment Trained nose — sensory and olfactive evaluation skill specific to fragrance raw materials and finished goods Strong hands-on experience with lab instrumentation; GC/GCMS familiarity is a plus, not a requirement Strong documentation habits Comfortable stepping into a QC decision-making role in the Manager's absence Technical degree preferred (Chemistry, Chemical Engineering, or related); equivalent hands-on fragrance-industry lab experience accepted in place of a degree On-site in Elizabeth, NJ, 5 days a week What We Offer: Real Growth Path — A senior technician track with real, independent QC decision-making authority, inside a quality function being built from the ground up Catered Lunch — Mon/Wed/Fri; Newark, NJ and Brooklyn shuttles 401(k) savings plan and employer match Competitive salary and meaningful equity in a high-growth company Flexible PTO and paid family leave Commuter benefits (pre-tax transit and parking) If this role inspires you we’d encourage you to apply. We are committed to recruiting, developing, and retaining an incredible team optimized for a diversity of thought, background, and approaches. For all Full-Time Employees, compensation is just one component of Osmo’s total rewards approach, which is designed to support the well-being, growth, and long-term success of our team members. Depending on the role, this may include base salary or contract-based pay, along with access to health, dental, and vision coverage; a 401(k) retirement savings plan with company match; flexible paid time off and company holidays; and equity or incentive compensation for eligible roles. Actual compensation will vary based on factors such as experience, skills, location, internal equity, and other relevant business considerations. Osmo regularly reviews pay ranges and compensation structures to ensure they remain competitive, equitable, and aligned with current market data. All employment decisions and responsibilities are determined based on current ability and your ability to grow, without regard to race, color, gender identity, sex, sexual orientation, religion, age, marital status, physical, mental, or sensory disability, or any other characteristic protected by applicable law. Recruitment & Staffing Agencies: Osmo does not accept unsolicited resumes from any source other than candidates. The submission of unsolicited resumes by recruitment or staffing agencies to Osmo or its employees is strictly prohibited unless contacted directly by the Osmo Talent Acquisition team. Any resume submitted by an agency in the absence of a signed agreement will automatically become the property of Osmo and Osmo will not owe any referral or other fees with respect thereto. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire Compensation Range: $80K - $100K

Job Description Who we are at Osmo: Osmo is a digital olfaction company, on a mission to give computers a sense of smell to improve the health and wellbeing of human life. Why? Our sense of smell both enriches and saves lives, and has a deep and direct connection to our emotions and memory. Olfactory Intelligence has applications across industries including fragrance, manufacturing, security, medicine, and more. We believe in the power of automation and thoughtfully applied AI/ML to solve problems beyond the reach of human intuition alone. We're headquartered in Elizabeth, NJ, with an additional office in Somerville, MA. We provide complimentary shuttle service from Brooklyn and Newark, NJ. About the Role Osmo's QC function is being built from the ground up, and this seat is where day-to-day quality judgment lives. You'll run testing and sampling on raw materials coming in and finished fragrance going out, using real fragrance-industry judgment that automated testing alone can't provide. You'll have the standing to make real-time accept/reject calls independently, and the experience to step in and cover QC decisions when the QC Manager is out. What You'll Do: Judge incoming raw material results from automated testing, deciding when an out-of-spec reading is a real defect versus normal variation in a natural material Apply trained olfactive judgment to evaluate raw materials and finished goods using sensory skill the equipment can't replicate Run triangulation testing on outgoing product to confirm it matches prior batches before it reaches a customer Make accept/reject calls in real time, multiple times a day, escalating only genuinely ambiguous cases to the QC Manager Step in and cover QC sign-off when the QC Manager is unavailable, keeping finished-goods flow moving rather than stalling Maintain and run lab instrumentation (GC/MS, photosampler, flash point testing, colorimeters), including calibration checks and upkeep Maintain audit-ready lab records: test logs, certificates of analysis, and equipment records Mentor QC Tech staff on fragrance-specific testing and olfactive judgment Partner across the floor with Purchasing, Warehouse, Shipping/Receiving, and Fragrance Development on sample flow and testing turnaround Who You Are: Fragrance industry experience or exposure required — adjacent industries (coffee, beer, wine, alcohol roasting, flavor, cosmetics, specialty chemicals) don't clear the bar Comfortable making high-frequency accept/reject calls independently, without over-escalating routine judgment Trained nose — sensory and olfactive evaluation skill specific to fragrance raw materials and finished goods Strong hands-on experience with lab instrumentation; GC/GCMS familiarity is a plus, not a requirement Strong documentation habits Comfortable stepping into a QC decision-making role in the Manager's absence Technical degree preferred (Chemistry, Chemical Engineering, or related); equivalent hands-on fragrance-industry lab experience accepted in place of a degree On-site in Elizabeth, NJ, 5 days a week What We Offer: Real Growth Path — A senior technician track with real, independent QC decision-making authority, inside a quality function being built from the ground up Catered Lunch — Mon/Wed/Fri; Newark, NJ and Brooklyn shuttles 401(k) savings plan and employer match Competitive salary and meaningful equity in a high-growth company Flexible PTO and paid family leave Commuter benefits (pre-tax transit and parking) If this role inspires you we’d encourage you to apply. We are committed to recruiting, developing, and retaining an incredible team optimized for a diversity of thought, background, and approaches. For all Full-Time Employees, compensation is just one component of Osmo’s total rewards approach, which is designed to support the well-being, growth, and long-term success of our team members. Depending on the role, this may include base salary or contract-based pay, along with access to health, dental, and vision coverage; a 401(k) retirement savings plan with company match; flexible paid time off and company holidays; and equity or incentive compensation for eligible roles. Actual compensation will vary based on factors such as experience, skills, location, internal equity, and other relevant business considerations. Osmo regularly reviews pay ranges and compensation structures to ensure they remain competitive, equitable, and aligned with current market data. All employment decisions and responsibilities are determined based on current ability and your ability to grow, without regard to race, color, gender identity, sex, sexual orientation, religion, age, marital status, physical, mental, or sensory disability, or any other characteristic protected by applicable law. Recruitment & Staffing Agencies: Osmo does not accept unsolicited resumes from any source other than candidates. The submission of unsolicited resumes by recruitment or staffing agencies to Osmo or its employees is strictly prohibited unless contacted directly by the Osmo Talent Acquisition team. Any resume submitted by an agency in the absence of a signed agreement will automatically become the property of Osmo and Osmo will not owe any referral or other fees with respect thereto. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire Compensation Range: $80K - $100K

Job Description Who we are at Osmo: Osmo is a digital olfaction company, on a mission to give computers a sense of smell to improve the health and wellbeing of human life. Why? Our sense of smell both enriches and saves lives, and has a deep and direct connection to our emotions and memory. Olfactory Intelligence has applications across industries including fragrance, manufacturing, security, medicine, and more. We believe in the power of automation and thoughtfully applied AI/ML to solve problems beyond the reach of human intuition alone. We're headquartered in Elizabeth, NJ, with an additional office in Somerville, MA. We provide complimentary shuttle service from Brooklyn and Newark, NJ. About the Role Osmo's QC function is being built from the ground up, and this seat is where day-to-day quality judgment lives. You'll run testing and sampling on raw materials coming in and finished fragrance going out, using real fragrance-industry judgment that automated testing alone can't provide. You'll have the standing to make real-time accept/reject calls independently, and the experience to step in and cover QC decisions when the QC Manager is out. What You'll Do: Judge incoming raw material results from automated testing, deciding when an out-of-spec reading is a real defect versus normal variation in a natural material Apply trained olfactive judgment to evaluate raw materials and finished goods using sensory skill the equipment can't replicate Run triangulation testing on outgoing product to confirm it matches prior batches before it reaches a customer Make accept/reject calls in real time, multiple times a day, escalating only genuinely ambiguous cases to the QC Manager Step in and cover QC sign-off when the QC Manager is unavailable, keeping finished-goods flow moving rather than stalling Maintain and run lab instrumentation (GC/MS, photosampler, flash point testing, colorimeters), including calibration checks and upkeep Maintain audit-ready lab records: test logs, certificates of analysis, and equipment records Mentor QC Tech staff on fragrance-specific testing and olfactive judgment Partner across the floor with Purchasing, Warehouse, Shipping/Receiving, and Fragrance Development on sample flow and testing turnaround Who You Are: Fragrance industry experience or exposure required — adjacent industries (coffee, beer, wine, alcohol roasting, flavor, cosmetics, specialty chemicals) don't clear the bar Comfortable making high-frequency accept/reject calls independently, without over-escalating routine judgment Trained nose — sensory and olfactive evaluation skill specific to fragrance raw materials and finished goods Strong hands-on experience with lab instrumentation; GC/GCMS familiarity is a plus, not a requirement Strong documentation habits Comfortable stepping into a QC decision-making role in the Manager's absence Technical degree preferred (Chemistry, Chemical Engineering, or related); equivalent hands-on fragrance-industry lab experience accepted in place of a degree On-site in Elizabeth, NJ, 5 days a week What We Offer: Real Growth Path — A senior technician track with real, independent QC decision-making authority, inside a quality function being built from the ground up Catered Lunch — Mon/Wed/Fri; Newark, NJ and Brooklyn shuttles 401(k) savings plan and employer match Competitive salary and meaningful equity in a high-growth company Flexible PTO and paid family leave Commuter benefits (pre-tax transit and parking) If this role inspires you we’d encourage you to apply. We are committed to recruiting, developing, and retaining an incredible team optimized for a diversity of thought, background, and approaches. For all Full-Time Employees, compensation is just one component of Osmo’s total rewards approach, which is designed to support the well-being, growth, and long-term success of our team members. Depending on the role, this may include base salary or contract-based pay, along with access to health, dental, and vision coverage; a 401(k) retirement savings plan with company match; flexible paid time off and company holidays; and equity or incentive compensation for eligible roles. Actual compensation will vary based on factors such as experience, skills, location, internal equity, and other relevant business considerations. Osmo regularly reviews pay ranges and compensation structures to ensure they remain competitive, equitable, and aligned with current market data. All employment decisions and responsibilities are determined based on current ability and your ability to grow, without regard to race, color, gender identity, sex, sexual orientation, religion, age, marital status, physical, mental, or sensory disability, or any other characteristic protected by applicable law. Recruitment & Staffing Agencies: Osmo does not accept unsolicited resumes from any source other than candidates. The submission of unsolicited resumes by recruitment or staffing agencies to Osmo or its employees is strictly prohibited unless contacted directly by the Osmo Talent Acquisition team. Any resume submitted by an agency in the absence of a signed agreement will automatically become the property of Osmo and Osmo will not owe any referral or other fees with respect thereto. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire Compensation Range: $80K - $100K

Job Description Background: Established in 1963, The Cardiovascular Care Group provides complete care for patients with vascular disease. With New Jersey offices in Essex, Passaic, Union, Morris, Monmouth, and Mercer counties, the Group is able to deliver care in both office-based and hospital settings. The Vein Institute provides comprehensive care to patients with venous disease. Job Summary: We are looking for a Vascular Technologist to assist the physicians in diagnosing and treating patients in the office, surgical suite or hospital setting. Your goal is to ensure a smooth workflow so our patients receive the best possible care. Responsibilities will include: • Prepare patients for non-invasive diagnostic vascular procedures, • Prepare area for the placement of testing equipment; perform vascular tests on patients (including arterial and venous leg testing, carotid artery imaging), • Use ultrasound machines to record vascular information, such as blood flow and pressure; cerebral, abdominal and peripheral circulation, • During procedures, monitor patient’s vital signs, • Maintain equipment, • (May) schedule patients for testing, • Follow safety protocols and procedures to ensure safe operation of equipment., • Handle protected health information in accordance with HIPAA guidelines., • Participate in Quality Improvement Program and initiatives., • Performs other duties as assigned; seeks guidance and direction when needed., • (May) perform vascular testing in the office and hospital setting Skills and Experience: • Minimum 4 years’ experience as a Registered Vascular Technician, • Strong patient/customer service orientation, • Maintains a professional appearance; takes pride and ownership of work and works in a cooperative, team-oriented manner, • Effective communicator, • Demonstrated ability to work under pressure and to handle shifting priorities, • Possesses the physical ability and perceptive acuity (e.g. visual, hearing) to perform all direct and indirect care functions. Education: • Associate’s degree in diagnostic medical sonography from an accredited program (CAHEP, ARDMS or CCI); BA degree a plus, • Registered Vascular Technician (RVT) or RVS required Benefits: • Excellent work/life balance - Day shift, no evenings, weekends or holidays, • Medical (100% paid by the group for Employee Only coverage with the Cigna Bronze plan)., • Dental – three plans to choose from Delta Dental and Cigna., • Vision – two plans to choose from Delta VSP., • Health Savings Account and Flexible Spending Accounts (Healthcare, Dependent Care, Transit and Parking) through Upswing., • Life Insurance – $25,000 Paid by the group with the option to enroll in additional Voluntary Life Insurance coverage., • Short-Term Disability and Long-Term Disability through New York Life with the option to enroll in additional voluntary coverage., • Ancillary optional benefits – Accident, Critical Illness and Hospital Indemnity through New York Life., • Paid Time Off, • Holiday Pay, • Paid Jury Duty – 1 day of full pay., • Employee Assistance Programs through RWJBH and Cigna., • 401k Employer Contributions – upon eligibility, group contributes 3%, • Working Advantage and Life Mart Employee Discounts., • Holiday Party, Employee Appreciation Days, Ice Cream Socials, various Fundraisers and Contests (receive prizes!) – Lots of employee engagement.

Job Description At Redefine Healthcare, we are committed to providing every patient with the highest quality of care and compassion. With a dedicated team of Neurosurgeons, Interventional Pain Management Specialists, Orthopedists, Psychiatrists, Physical Therapists, Chiropractors, and Vascular specialists, we pride ourselves on delivering coordinated, comprehensive care across a growing range of specialties Redefine Healthcare is looking for a dedicated, per diem X-Ray Tech to join our expanding team of healthcare professionals in our Jersey City Office. The X-Ray Tech will perform high-quality imaging procedures, maintain radiology equipment, assist in daily operations, and collaborate with a team to ensure excellent patient care in a dynamic and fast-paced healthcare environment. We are looking for candidates that are motivated, compassionate and are looking to advance their career in a community that is always growing. Job Title: X-Ray Tech Pay Rate: $40-45/ hour depending on specialty and experience Hours: 40 hours per week Job Type: Per diem Benefits: Paid time off, sick time, health insurance (medical, dental, vision, accident, and critical illness), life insurance, 401(k) with Company match, yearly bonus Job Title Duties (not limited to): • Ensure appropriate supplies and equipment are ready and available for scheduled procedures., • Ensure equipment is in proper working condition prior to imaging being performed., • Position/reposition equipment throughout procedures and process fluoroscopy images., • Daily C-arm cleaning/general maintenance., • Maintain QA for Radiology Department: daily warm-up and inspection, phantom images, and quarterly QA testing/logs., • Review/distribute/collect radiation monitoring devices of all OR personnel monthly., • Review radiation monitoring reports and distribute monthly to personnel and Administrator., • Investigate any radiation exposures that are out of limits for monthly, quarterly, or yearly time periods., • Perform standard x-ray imaging as ordered in-house by providers., • Other radiology-related tasks may be assigned. Minimum Level of Education or Experience Required: • Bachelor's or Associate degree in radiologic technology, radiology, or a related field., • Appropriate state licensure., • Proven experience working as an X-ray technician., • Working knowledge of radiographic equipment., • Ability to move or lift patients., • Excellent analytical and problem-solving skills., • Effective written and verbal communication skills., • Ability to navigate health EHR systems., • Familiarity with medical terminology.

Job Description Description: This is a regular, full-time position. As a maintenance technician, we will keep you busy! You play a key role in upholding our high standards and reputation by maintaining all areas of the property. This is an opportunity to really make a difference in someone’s day. If you are hands-on and hard-working with an eye for details, do not miss out on this opportunity! As a member of the team, we set you up for success by offering a supportive and encouraging work environment. Essential Duties and Responsibilities: • Maintain clean, safe and secure facilities, includes cleaning, sweeping units, changing lights, picking up trash, etc., • Work with the Facility Managers and main office to keep facilities in excellent shape, • Perform building and equipment repairs, maintenance and upgrades – this ranges from replacing weatherstripping or a latch on an overhead door to painting a wall, • Weeding and yard work as needed, • Snow and trash removal, • Assist Facility Managers address customer needs, as needed, • Cut off locks and assist in auction process, prepare units before for an auction and vacate as prescribed by law and approved by management, • Walk site and proactively identify areas of repair or improvement; create plan of action to address any issues identified, • Other duties as assigned Storage King USA offers an inclusive, supportive, and encouraging work environment along with a competitive pay structure, and an excellent comprehensive benefits package, including: • Medical, dental, and vision insurance options at an affordable rate,, • Company-paid life insurance and short-term disability,, • 401(k) with a company match,, • Comprehensive perks discount program (with offers across the country),, • Paid holidays and paid time off. Requirements • Experience in any craft or trade skills, including carpentry, mechanical, electrical, painting, etc., • A positive can-do attitude, • Adaptability to change, • Ability to perform maintenance, repairs, and upgrades, • Energetic, outgoing and customer-oriented personality, • Ability to lift 50+ lbs, • Valid driver’s license with access to reliable transportation, • Willingness to travel to multiple locations required

Job Description Come rise above with Yona! Our employees are instrumental in maintaining a happy, healthy, and clean environment for the residents. We depend on our team members to be highly motivated, committed, and compassionate individuals who share our vision and work together to attain it. Our work environment encourages responsibility for personal growth and promotes pride in each employee. You will play an essential role in providing warm and friendly hospitality to all the residents, visitors, and coworkers. The Environmental Services Manager plans, organizes, develops and directs the overall operation of the housekeeping and laundry department in a skilled nursing facility in accordance with current federal, state, and local standards, guidelines, and regulations governing the facility. You will be responsible for coordinating and supporting all activities of the department and work with all levels of facility staff to ensure the facility is clean, sanitary, safe, secure, and adequately supplied so the highest degree of quality resident care can be maintained at all time. Benefits of Yona • Comprehensive medical, dental, and vison insurance, • Employer paid life insurance, • 401(k) plan, • Competitive paid time off, • Employee assistance program, • Wages on demand, • Discount & wellness programs, • Career growth Responsibilities: • Interviews, hires and orients housekeeping, floor care, and laundry staff, • Trains workers in housekeeping, laundry, and floor care procedures and proper operation and maintenance of equipment, • Plans, organizes, directs, coordinates and supervises functions and activities of the departments, • Supervises and evaluates the quality of work completed by department employees, • Maintains an environment that is in sanitary, attractive and in orderly condition, • Forecasts and plans the purchase of cleaning supplies, chemicals and equipment, • Plans work and staffing schedules to ensure adequate services are rendered. Maintains proper staffing levels, • Maintains required records including but not limited to; inventory, compliance, income/expense, and personnel records, • Conducts regular management staff meetings and communicates with members of other departments to coordinate housekeeping activities, • Manages a cost-effective program to budget, • Maintains the department to be survey-ready at all times, assuring the department operates within federal, state, and local regulations, • Maintains excellent relations with residents, visitors, and all community departments, • Actively participates in facility meetings and committees, • Follows all Company policies and procedures, • Promotes the professional growth and development of the entire departmental team, • Conducts quality assurance rounds and inspections to ensure current quality controls and methodologies are suitable and sustainable, • Reports monthly initiatives, goals, and accomplishments, • Promotes and monitors resident satisfaction, • Performs the job assignments of a housekeeper, laundry worker or floor care technician as necessary, • Other job duties as assigned by the supervisor Requirements: • Four year college degree and equal related experience strongly desired; high school diploma/GED required, • Two years experience in housekeeping services in a healthcare environment and personnel supervision is desired, • Skilled in motivating and supervising staff members, • Excellent interpersonal skills, customer service and quality attitude, • Ability to work under pressure and meet established goals and objectives, • Public speaking skills, • Excellent stress management skills, administrative and organizational, and follow-through (with associates and clients) skills required, • Ability to interact positively with residents, client and other personnel and the public, • Ability to work all shifts as needed, • Proficient in the use of Windows based office software including but not limited to Microsoft Office, Word, Excel, PowerPoint and Outlook, • Must be able to work around cleaning chemicals, • Must be able to lift/carry a maximum of 50 pounds, push/pull a maximum of 50 pounds, stand, sit, bend and walk for extended periods of time This posting in no way states or implies that these are the only duties to be performed by the employee occupying this position. Candidates/employees may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. Certain job functions described herein may be subject to possible modification in accordance with applicable state and federal laws. Yona provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. IND123

Job Description Come rise above with Yona! Our employees are instrumental in maintaining a happy, healthy, and clean environment for the residents. We depend on our team members to be highly motivated, committed, and compassionate individuals who share our vision and work together to attain it. Our work environment encourages responsibility for personal growth and promotes pride in each employee. You will play an essential role in providing warm and friendly hospitality to all the residents, visitors, and coworkers. The Environmental Services Manager plans, organizes, develops and directs the overall operation of the housekeeping and laundry department in a skilled nursing facility in accordance with current federal, state, and local standards, guidelines, and regulations governing the facility. You will be responsible for coordinating and supporting all activities of the department and work with all levels of facility staff to ensure the facility is clean, sanitary, safe, secure, and adequately supplied so the highest degree of quality resident care can be maintained at all time. Benefits of Yona • Comprehensive medical, dental, and vison insurance, • Employer paid life insurance, • 401(k) plan, • Competitive paid time off, • Employee assistance program, • Wages on demand, • Discount & wellness programs, • Career growth Responsibilities: • Interviews, hires and orients housekeeping, floor care, and laundry staff, • Trains workers in housekeeping, laundry, and floor care procedures and proper operation and maintenance of equipment, • Plans, organizes, directs, coordinates and supervises functions and activities of the departments, • Supervises and evaluates the quality of work completed by department employees, • Maintains an environment that is in sanitary, attractive and in orderly condition, • Forecasts and plans the purchase of cleaning supplies, chemicals and equipment, • Plans work and staffing schedules to ensure adequate services are rendered. Maintains proper staffing levels, • Maintains required records including but not limited to; inventory, compliance, income/expense, and personnel records, • Conducts regular management staff meetings and communicates with members of other departments to coordinate housekeeping activities, • Manages a cost-effective program to budget, • Maintains the department to be survey-ready at all times, assuring the department operates within federal, state, and local regulations, • Maintains excellent relations with residents, visitors, and all community departments, • Actively participates in facility meetings and committees, • Follows all Company policies and procedures, • Promotes the professional growth and development of the entire departmental team, • Conducts quality assurance rounds and inspections to ensure current quality controls and methodologies are suitable and sustainable, • Reports monthly initiatives, goals, and accomplishments, • Promotes and monitors resident satisfaction, • Performs the job assignments of a housekeeper, laundry worker or floor care technician as necessary, • Other job duties as assigned by the supervisor Requirements: • Four year college degree and equal related experience strongly desired; high school diploma/GED required, • Two years experience in housekeeping services in a healthcare environment and personnel supervision is desired, • Skilled in motivating and supervising staff members, • Excellent interpersonal skills, customer service and quality attitude, • Ability to work under pressure and meet established goals and objectives, • Public speaking skills, • Excellent stress management skills, administrative and organizational, and follow-through (with associates and clients) skills required, • Ability to interact positively with residents, client and other personnel and the public, • Ability to work all shifts as needed, • Proficient in the use of Windows based office software including but not limited to Microsoft Office, Word, Excel, PowerPoint and Outlook, • Must be able to work around cleaning chemicals, • Must be able to lift/carry a maximum of 50 pounds, push/pull a maximum of 50 pounds, stand, sit, bend and walk for extended periods of time This posting in no way states or implies that these are the only duties to be performed by the employee occupying this position. Candidates/employees may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. Certain job functions described herein may be subject to possible modification in accordance with applicable state and federal laws. Yona provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.