Office technician jobs in East Orange, New JerseyCreate job alerts

Job Description Position Overview We are currently seeking a skilled HVAC Technician with strong commercial experience to join our growing team. In this role, you will be responsible for the installation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and refrigeration systems in commercial buildings. The ideal candidate is reliable, safety-focused, and has hands-on experience with a variety of HVAC systems used in office buildings, retail spaces, schools, and other commercial facilities. Key Responsibilities Install, inspect, and repair commercial HVAC systems, including rooftop units, split systems, chillers, boilers, VAV systems, and ductwork. Perform preventative maintenance tasks according to established schedules and equipment specifications. Diagnose and troubleshoot mechanical and electrical issues in HVAC systems. Ensure all work complies with local, state, and federal codes, as well as company and safety standards. Maintain accurate service records, work orders, and equipment documentation. Communicate effectively with clients, supervisors, and other team members regarding service updates and repair recommendations. Assist in startup and commissioning of new systems and equipment. Respond to emergency service calls in a timely and professional manner. Maintain tools, equipment, and company vehicles in safe and proper working condition. Qualifications High school diploma or GED required; technical or trade school certification in HVAC is preferred. 3+ years of experience as an HVAC technician in commercial environments. EPA Section 608 Certification required. Valid driver's license with a clean driving record. Strong knowledge of HVAC systems, controls, refrigeration cycles, and associated components. Ability to read and interpret blueprints, technical diagrams, and service manuals. Familiarity with digital HVAC tools and software is a plus. Excellent troubleshooting skills and attention to detail. Ability to work independently and as part of a team in a fast-paced environment. Must be able to lift up to 50 lbs, work at heights, and in confined spaces when needed. Benefits Competitive hourly wage based on experience Health, dental, and vision insurance 401(k) with company match Paid time off and holidays Opportunities for training, certifications, and career advancement Company vehicle and tools provided (where applicable)

Job Description We are seeking a skilled and personable LICENSE NAIL TECHNICIAN to join our Podiatrist Office in Clifton. Flexible hours. Must Drive and have a Nail Technician License by the State of NJ .

Job DescriptionLocation: Union, NJ 07083 Date Posted: 09/01/2026 Category: Center Based Education: High School Diploma/GED Great Compensation $20/hr, Benefits, PTO and potential for career growth! Join us in Creating a Colorful Beginning! At KFSABA we value innovation, creativity, and the power of applied behavior analysis therapy for children with autism. Position DescriptionWe are seeking compassionate people to work as Behavioral Technicians (BTs), and Registered Behavior Technicians (RBTs) to provide direct treatment and ABA therapy. Under the supervision of a BCBA clinician, the BT is responsible for working one-on-one with children carrying out their individualized treatment plans. Key Benefits and Advantages (Based on schedule) > Highly competitive compensation based on your education and experience> Medical, Dental, and Vision Insurance> Disability and Life Insurance, 401k, and other voluntary benefits> 8 Paid Holidays + 16 PTO Days (6 sick, 10 vacation) > 401K match > Weekly Pay> Work with a committed agency with over a 20-year track record of service> 40-hour RBT course providedFacility and Hours> Center-based opportunities> Various schedules availableRequired Experience and Education> Minimum of a HS Diploma or GED> Minimum of 6 months to 1 year of experience with children (ABA preferred)> Ability to work independently as well as in a team environment> It is an essential function to be able to meet the rigorous demands of the job, which may include: long periods of standing, sitting, following, pushing/pulling equipment, lifting, bending, kneeling, crouching, crawling, and engaging with children on the floor or standing for long periods. About UsKaleidoscope ABA has been in business for over 20 years and has 29 locations across the country. Join a growing team looking to make a difference in the lives of children! Kaleidoscope ABA Therapy Services is an equal opportunity employer. Title: Behavioral Technician Class: Behavioral Therapist Type: TEMPORARY Ref. No.: 1290698-24 BC: #KFS204 Company: Kaleidoscope ABA Contract Contact: Union Careers Office Email: Recruit@kfsaba.org Office Phone: 877-ABA-0399 Office Address: 2780 Morris Avenue, Union, NJ About Us: Responding to this post or registering on the KFSABA.org website is for information transfer only and is not an application, employment offer or commitment. When and if opportunities are presented, you may accept or decline such opportunities at your sole discretion. Further steps are required to complete your registration with the Kaleidoscope Family Solutions ABA, Inc. dba Kaleidoscope ABA. We appreciate your interest in our agency and look forward to meeting with you.

Job DescriptionLocation: Union, NJ 07083 Date Posted: 08/01/2026 Category: Center Based Education: High School Diploma/GED Great Compensation $20/hr, Benefits, PTO and potential for career growth! Join us in Creating a Colorful Beginning! At KFSABA we value innovation, creativity, and the power of applied behavior analysis therapy for children with autism. Position DescriptionWe are seeking compassionate people to work as Behavioral Technicians (BTs), and Registered Behavior Technicians (RBTs) to provide direct treatment and ABA therapy. Under the supervision of a BCBA clinician, the BT is responsible for working one-on-one with children carrying out their individualized treatment plans. Key Benefits and Advantages (Based on schedule) > Highly competitive compensation based on your education and experience> Medical, Dental, and Vision Insurance> Disability and Life Insurance, 401k, and other voluntary benefits> 8 Paid Holidays + 16 PTO Days (6 sick, 10 vacation) > 401K match > Weekly Pay> Work with a committed agency with over a 20-year track record of service> 40-hour RBT course providedFacility and Hours> Center-based opportunities> Various schedules availableRequired Experience and Education> Minimum of a HS Diploma or GED> Minimum of 6 months to 1 year of experience with children (ABA preferred)> Ability to work independently as well as in a team environment> It is an essential function to be able to meet the rigorous demands of the job, which may include: long periods of standing, sitting, following, pushing/pulling equipment, lifting, bending, kneeling, crouching, crawling, and engaging with children on the floor or standing for long periods. About UsKaleidoscope ABA has been in business for over 20 years and has 29 locations across the country. Join a growing team looking to make a difference in the lives of children! Kaleidoscope ABA Therapy Services is an equal opportunity employer. Title: Behavior Technician Class: Behavioral Therapist Type: PERMANENT ONLY Ref. No.: 1306272-9 BC: #KES303 Company: Kaleidoscope Education Solutions Contract Contact: Contract Submit NJ Office Email: BM@kesgroup.net Office Phone: 888-829-2477 Office Address: 1460 Route 9 North Suite 300, Woodbridge NJ 07095 About Us: Kaleidoscope Education Solutions is a referral agency for professionals seeking supplemental K12 education marketplace opportunities. Registering with Kaleidoscope Education Solutions is not a guarantee that opportunities will be available and/or located. All professionals contracting through Kaleidoscope Education Solutions are classified and compensated as self-employed independent contractors.

Job DescriptionBenefits: • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance, • 401(k), • 401(k) matching, • Bonus based on performance, • Dental insurance The Assembly Technician should be able to learn quickly and will have responsibility for assembling multiple types of valves. The Assembly Technician will be cross trained to perform assembly functions on all valves/products. Cross training will include the assisting on all products as well as duties in the machine shop and mold shop when needed. In addition, adherence to a job rotation schedule is required. Essential Functions: • Assemble and label all valves/products such as relief valves, ball valves, pressure regulators, etc. ranging anywhere from ½” to 4”, • Assemble and label all valves/products following specific specifications and work instructions, • Must work with all rubber seals, including EPDM, VITON, Teflon, Aflas, PFA and Kalrez, • Must work with all body materials, including PVC, CPVC, PP, GPP, NPP, PVDF, TF, and VP, • Assemble quality products that are ready for testing/shipping, • Cross train to be able to assemble all types of valves and products§ Follow all safety guidelines as outlined in the company safety manual § Perform other duties as assigned Skills/Qualifications: § High School diploma or GED required • A minimum of 2 years of proven experience as an Assembly Technician or similar position, • Proficiency with the Microsoft Office Suite is a plus, • Impeccable attention to detail§ Able to stand for more than 4 hours at a time § Able to lift 15 lbs. or more • An analytical mind with good math skills, • Great communication and interpersonal abilities, • Must be reliable and trustworthy, • Collaborate with warehouse employees and other staff to ensure business goals are met

HPC Industrial, powered by Clean Harbors, in Linden, New Jersey is looking for a LDAR Technician to join their safety conscious team! The LDAR Monitoring Technician, using an analyzer and electronic data recorder, is responsible for accurately monitoring components on an assigned route within an industrial facility. The Monitoring Technician is also responsible for calibrating equipment to ensure optimum performance of the analyzer, as well as identifying leads and process leak tags. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our #1 priority and we live it 3-6-5! Competitive wages Comprehensive health benefits coverage after 30 days of full-time employment Group 401K with company matching component Own part of the company with our Employee Stock Purchase Plan Opportunities for growth and development for all the stages of your career Generous paid time off, company paid training and tuition reimbursement Positive and safe work environments RESPONSIBILITIES Key Responsibilities: Demonstrates initiative, planning work and carrying out tasks without detailed instructions; makes constructive suggestions; prepares for problems or opportunities in advance and undertakes additional responsibilities; Must possess the ability to use a portable analyzer and electronic data collector; Ability to analyze data, evaluate situations and identify problems or opportunities, including likely causes; Demonstrates concern for meeting internal and external customers' needs in a manner that provides satisfaction for the customer within the resources that can be made available; Ability to adapt quickly to change and be open to considering new approaches to solving problems and work processes; Ability to develop factual, logical courses of action, considering resources, constraints and company values; Responsible for monitoring components in an industrial environment to detect emissions from process equipment; Performs monitoring activities for an assigned route within a prescribed period of time, ensuring all components are accurately monitored and reported; Responsible for calibrating equipment to ensure optimum performance. Makes minor mechanical adjustments when situations arise; Identifies leaks and processes leak tags; Completes daily upload of monitoring activity to the customer database and completes daily emissions monitoring reports– must have basic computer knowledge; Communicate daily equipment changes with office personnel; Communicate/Coordinate with plant personnel; Performs other duties as assigned. QUALIFICATIONS Required Qualifications: Strong communication (written, verbal and listening) and interpersonal skills; Prior experience in chemical plants or refineries is helpful, but not necessary; Must be willing/able to work at moderate to high levels of physical exertion for extended periods; Must be willing/able to work in inclement weather conditions (extreme heat/cold); Must be willing to work extended hours and weekends when necessary; Mechanical aptitude and problem-solving abilities a plus. What does it take to work for HPC-Industrial? High school diploma/GED or equivalent experience Valid TWIC required or ability to obtain TWIC. About HPC-Industrial HPC-Industrial, a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. HPC-Industrial is an equal opportunity employer. HPC-Industrial is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ect@cleanharbors.com or 1-844-922-5547. HPC-Industrial is a Military & Veteran friendly company. Please be advised that Artificial Intelligence (AI) tools may be used to support certain stages of the recruitment process but are not used as a replacement for human decision making. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *HPC

Job Description Lightning Mechanical LLC is seeking an experienced Commercial HVAC Service Technician to join our team in Maplewood, New Jersey. We provide commercial and industrial HVAC service, maintenance, repair, replacement, and installation throughout New Jersey and the New York metropolitan area. Our technicians work on a wide range of equipment, including VRV and VRF systems, rooftop units, split systems, heat pumps, boilers, pumps, motors, cooling towers, ventilation systems, controls, and related mechanical equipment. Lightning Mechanical also provides factory-trained service for Daikin VRV and Applied systems and supports many other major HVAC manufacturers. Responsibilities: • Diagnose and repair commercial HVAC equipment, • Perform preventive maintenance and equipment inspections, • Troubleshoot electrical, mechanical, refrigerant, and control-system issues, • Service VRV and VRF systems, rooftop units, split systems, heat pumps, boilers, pumps, motors, and cooling towers, • Replace compressors, motors, controls, valves, sensors, and other components, • Perform refrigerant recovery, evacuation, charging, and leak testing, • Complete service reports clearly and accurately, • Communicate findings, repair recommendations, and equipment conditions to customers and office staff, • Identify root causes instead of only addressing immediate symptoms, • Maintain company tools, vehicles, parts, and equipment, • Follow company safety procedures and applicable codes, • Participate in the on-call rotation for emergency service, • Travel to customer locations throughout New Jersey and the New York metropolitan area Qualifications: • At least 5 years of commercial HVAC service experience preferred, • Strong troubleshooting and diagnostic ability, • Experience working on commercial HVAC equipment and controls, • Knowledge of refrigeration cycles, electrical systems, airflow, hydronic systems, and mechanical components, • EPA Section 608 certification required, • Valid driver’s license and acceptable driving record, • Ability to work independently and complete service documentation accurately, • Ability to lift equipment, climb ladders, work on rooftops, and perform the physical duties of the position, • Strong communication and customer-service skills, • Daikin VRV, VRF, chiller, boiler, controls, or manufacturer training is strongly preferred, • Factory training and additional HVAC certifications are a plus What We Offer: • Full-time, year-round employment, • Competitive compensation based on experience, • Medical, dental, vision, retirement, life insurance, and paid time off, if applicable to this position, • Company vehicle and service tools, if applicable, • Ongoing technical and manufacturer training, • Opportunity to work on advanced commercial systems and mission-critical facilities, • Established company with in-house service, installation, piping, and sheet-metal capabilities, • Opportunity for advancement based on performance and technical ability Lightning Mechanical serves commercial properties, medical facilities, data centers, multi-tenant buildings, and other complex environments. Our technicians are supported by experienced office and field teams, specialized diagnostic equipment, and access to parts and factory resources. Lightning Mechanical LLC is an equal opportunity employer. For the one-line company pitch, keep the same one already entered because it applies to both jobs. \nCompany Description Lightning Mechanical LLC is an established commercial HVAC contractor based in Maplewood, New Jersey. We provide service, maintenance, repair, replacement, and installation for commercial and industrial HVAC systems throughout New Jersey and the New York metropolitan area. Our work includes VRV and VRF systems, boilers, pumps, cooling towers, ductwork, piping, controls, and in-house sheet metal fabrication. We serve commercial properties, medical facilities, data centers, multi-tenant buildings, and other mission-critical environments. Lightning Mechanical LLC is an established commercial HVAC contractor based in Maplewood, New Jersey. We provide service, maintenance, repair, replacement, and installation for commercial and industrial HVAC systems throughout New Jersey and the New York metropolitan area. Our work includes VRV and VRF systems, boilers, pumps, cooling towers, ductwork, piping, controls, and in-house sheet metal fabrication. We serve commercial properties, medical facilities, data centers, multi-tenant buildings, and other mission-critical environments.

Service Technician Rutherford, NJ Monday - Friday 3pm-Midnight Job Description As a Service Technician, you will be responsible for diagnosing, maintaining and repairing Electric vehicles. You will demonstrate your passion for sustainable transportation and creatively solve problems in a fast-paced environment. As a Service Technician, it is expected to have ASE certifications obtained within 6-8 months of hire date. We will reimburse the cost associated with successful completion. Responsibilities: • Confidently repair basic and major mechanical issues and perform basic electrical and mechanical diagnosis, • Maintain a high knowledge level of High Voltage (HV), Low Voltage (LV), and general electric vehicle systems, • Follow correct repair order documentation procedures, i.e. The Three C's, • Effectively work with the appropriate software suite to properly and completely document all customer vehicle interactions, • Effectively communicate and collaborate with other members of the service team (i.e., advisor, manager, etc.) as well as customers., • Ability to demonstrate and teach learned technical skills/knowledge with others, • Demonstrate attention to detail and passion for creating positive client experiences, • Ability to work remotely and support mobile service team as needed Qualifications: • 2-5 years of experience as an automotive service technician, including previous experience with EV/HEV diagnosis and repair Knowledge of High Voltage systems, Low Voltage systems, and Electric Vehicle powertrains, • Customer facing experience exhibiting excellent written and verbal communication skills, • Ability to use applications such as Microsoft Office as well as learn proprietary DMS software, • EPA 609 Certification, • Willingness to complete company provided CPR training post hire, • Valid driver’s license with no suspensions within the past year. (Drivers under 21 must have maintained a Driver’s License for a minimum of 3 years and successfully complete Training upon hire Preferred Qualifications: • ASE Certifications (A4, A5, A6, A7, A8, L3, L4 - ADAS), • Experience in luxury automobile repair environments

A leading luxury electric vehicle manufacturer is seeking an experienced Service Technician to diagnose, maintain, and repair advanced electric vehicles. This position is ideal for an automotive technician with hands-on experience in EV/HEV systems, electrical diagnostics, mechanical repair, and customer service. The Service Technician will work in a fast-paced environment supporting both in-shop and mobile service operations. The company also provides training and reimbursement for required ASE certifications. Responsibilities Diagnose and repair basic and complex mechanical and electrical issues Maintain strong knowledge of high-voltage, low-voltage, and electric vehicle systems Perform maintenance and repair work on electric vehicle powertrains and related components Accurately document vehicle concerns, causes, and completed repairs Use service software and diagnostic tools to document customer and vehicle interactions Communicate effectively with service advisors, managers, technicians, and customers Share technical knowledge and provide guidance to other team members when needed Follow established safety, maintenance, and repair procedures Deliver a high-quality customer experience with strong attention to detail Support mobile service operations as needed Required Qualifications 2–5 years of experience as an automotive service technician Previous experience diagnosing and repairing electric or hybrid vehicles Knowledge of high-voltage systems, low-voltage systems, and electric vehicle powertrains Strong electrical and mechanical diagnostic abilities Customer-facing experience with strong written and verbal communication skills Ability to use Microsoft Office and learn proprietary dealership management software EPA Section 609 certification Willingness to complete company-provided CPR training after hire Valid driver’s license with no suspensions within the previous year Ability to obtain required ASE certifications within 6–8 months of hire Preferred Qualifications ASE certifications such as A4, A5, A6, A7, A8, L3, or L4 Experience working in a luxury automotive repair or dealership environment Experience with advanced driver-assistance systems Previous mobile service experience

Surgery-Focused DVM Opportunity – Newark, NJ (Profit-share & ownership upside!) Key Highlights • Full-service small animal hospital in Newark, NJ, roughly 20 minutes from Manhattan, • Surgery-focused role with a proven, high-volume reproductive and C-section caseload, • Long-term case mix of about 60% surgery and 40% general practice, • Profit-sharing model with realistic earning potential of $300,000+ and higher in exceptional years, • Flexible scheduling, part-time or full-time, built around you, • Experienced technician team, with the option to add support staff as you grow, • Clear path toward founding doctor and leadership roles as the group expands across New Jersey, • Hands-on ownership that understands the day-to-day realities of clinical practice About You • DVM or equivalent degree that allows you to practice veterinary medicine in the US, • Hold, or are eligible for, licensure in New Jersey, • Confident and experienced with C-sections and cherry eye corrections, plus routine soft tissue surgery and dentals, • Motivated by surgery and energized by a high-volume, high-reward environment, • Comfortable working in a small, growing, entrepreneurial practice, • Strong communicator who enjoys collaborating with the wider team Benefits • Highly competive base salary up to $180,000, • Profit-sharing model with strong earning potential well beyond $250k+, • Healthcare stipend, • CE support and conference funding, • Flexible, accommodating time off, • 401(k) can be arranged, • Relocation and sign-on support open to discussion, • Potential founding doctor and ownership-style opportunities in future locations More about this opportunity We are partnering with a recently relaunched, privately-owned, surgery-focused small animal hospital in Newark, NJ that is rebuilding its clinical team and looking to welcome an Associate Veterinarian. Backed by a leadership team that blends strong financial expertise with hands-on veterinary operations experience, this is an entrepreneurial, growth-minded practice with real momentum behind it. The clinic combines busy general practice, covering wellness, preventive care, dermatology, and dentistry, with a high-volume surgical caseload that includes C-sections, cherry eye corrections, spays and neuters, and mass removals. The long-term model is built around two veterinarians, one leaning toward surgery and one toward appointments, with plenty of room to mix the two around your interests. What makes this role stand out is the upside. You can choose a compensation model that suits you, whether that is a higher base or a lower base paired with meaningful profit-sharing (worth upwards of $300k!) and genuine ownership potential. As the group expands to additional New Jersey locations, there will be founding-doctor opportunities for those who want them. The culture is flexible, collaborative, and supportive, with cross-trained technicians, individualized scheduling, open PTO, and a Fear Free approach for pets, owners, and staff alike. Whether you value stability or you are excited by the chance to help build something and share in its success, this team will shape the role around you. Next Steps If you are interested, hit “Apply” or, for a confidential chat to find out more, simply email ben@atlasconsultancygroup.com or call the office at (980) 202 4966. INDBR

Schneider Electric has an outstanding opportunity for a passionate individual to assume the role of a building security technician at our Lyndhurst, NJ location, with regular assignments at New York job sites, including Brooklyn and Manhattan. What will you do? • Diagnose, install, troubleshoot, maintain, and integrate digital and analog systems, including Access Control, CCTV, Network, Visitor Management, and Security systems, • Provide on-site technical support and training to customers and end-users., • Perform scheduled preventative maintenance and ensure proper commissioning/documentation and startup of Systems., • Install, replace, and recommission Systems devices, while maintaining test records and creating necessary documentation., • Provide on-site training, emergency, warranty, and after-hours services, and adhere to safety requirements, • Assist in field startup, material logistics, and demonstrate proficiency in relevant engineering tools. What qualifications will make you successful for this role? • Strong understanding of analog/digital signals, relay logic, structured cabling, building infrastructure, software/testing tools., • Excellent troubleshooting and diagnostic skills with a customer-centric approach., • Ability to work independently and as part of a team to deliver exceptional service., • Strong communication and interpersonal skills., • Strong understanding of MS Office applications., • 2+ years of security technician experience with installation, service, or both, • Must have analog and digital CCTV installation and/or service experience, • Must have experience with Access Control systems - installation, confirguration, maintenance, troubleshooting,, • OSHA 30 and SST are highly preferred, • Strong preference for certification in one or more of the following areas: Genetec, Lenel, AMAG, or Commend What's in it for me? • Direct customer impact through meaningful technical work in the field, • Mentorship and structured support to build your technical skills and confidence, • Career growth opportunities within a global leader in energy management and automation, • Exposure to diverse industries and innovative technologies For this U.S. based position, the expected compensation range is $66,000 - $99,000 per year, which includes base pay and short-term incentive. The compensation range for this full-time position applies to candidates located within the United States. Our salary ranges are determined by reviewing roles of similar responsibility and level. Within the salary range, individual pay is determined by several factors including performance, knowledge, job-related skills, experience, and relevant education or training. Schneider Electric also offers a comprehensive benefits package to support our employees, inclusive of medical (with member reward points), dental, vision, and basic life insurance, Benefit Bucks (credits to apply towards your benefits) flexible work arrangements, paid family leaves, 401(k) + match, well-being and recognition (including service anniversary) programs, 12 holidays per year, 15 days of paid time off per year (pro-rated in the first year of employment based on start date), opportunity to purchase company stock (eligibility depends on start date), and military leave benefits. This role does not support sponsorship and requires work authorization within the United States. You must submit an online application to be considered for any position with us. This position will be posted until filled. Let us learn about you! Apply today. At Schneider, we believe that every employee is a talent who deserves equal opportunities. This means you matter. Every individual needs to feel valued, supported, and treated fairly to do their best work. Our Total Rewards is our way of saying: “We see you. We value you”. It’s more than just pay and benefits- it’s a meaningful investment in you. It is designed for you to perform, grow, feel safe, and elevate your potential to shine as an impact maker. For this U.S. based position, the expected pay range is USD 68,000 - USD 102,000 per year. This pay range includes base pay and short-term incentives. The compensation range for this full-time position applies to candidates located within the United States. Our pay ranges are determined by reviewing roles of similar responsibility and level. Within the pay range, individual pay is determined by several factors including performance, knowledge, job-related skills, experience, and relevant education or training. Schneider Electric is there when it matters most to you Our Total Rewards package outlines all the benefits and support you’ll enjoy as part of the Schneider Electric team: Care for Yourself and Your Family. We ensure you feel secure with benefits that help you and your family thrive: medical (with member reward points), dental, vision, and basic life insurance, Benefit Bucks, flexible work arrangements, paid family leaves, well-being programs, 12 holidays per year, and 15 days of paid time off per year. Invest and Plan Your Future. We help you plan and invest for the future with competitive pay and programs including base salary, incentives, company share ownership, and 401(k) with match. Grow Your Skills and Career. We support development through performance discussions, global opportunities, the Schneider Career Hub, and learning platforms like Coursera. Team Up in the Workplace. We encourage collaboration, recognition, sharing your voice, and an inclusive workplace. You must submit an online application to be considered for any position with us. This position will be posted until filled. Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best. We mirror the diversity of the communities in which we operate, and ‘inclusion’ is one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do. At Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders. You can find out more about our Trust Charter _ Schneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

Executive MAC Technician (MAC Specialist) Contract for 1 year with possible extension Onsite in Jersey City, NJ Executive MAC Technician Job Description: The Technology Department develops and supports a wide range of IT solutions in support of the Agency's mission. Under the management of the Assistant Director, Customer Service and Web Service, the Executive MAC Technician will serve as the primary technology advisor and support specialist for the Authority's Executive Leadership Team, providing high-touch, white-glove support exclusively within the Apple ecosystem. This is a highly visible, client-facing role requiring exceptional technical expertise in macOS, iOS, and Apple enterprise technologies, along with outstanding interpersonal skills to effectively serve C-level executives and their support staff. The Executive MAC Technician will be responsible for end-to-end management of all Apple technology deployments, troubleshooting, strategic consulting, and maintaining the highest standards of service delivery to ensure executives can maximize productivity with minimal technology disruption. Responsibilities: • Serve as the primary point of contact and technology advisor for all Apple/MAC ecosystem matters for Executive Leadership, providing proactive, anticipatory support that exceeds expectations., • Provide expert troubleshooting and resolution of macOS, iOS, iPadOS hardware and software issues for Executive Leadership at primary offices, remote locations, and during travel, ensuring minimal downtime and maximum productivity., • Perform installation, configuration, and optimization of MacBook Pro/Air, iMac, Mac mini, Mac Studio, iPhone, iPad, Apple Watch, and all Apple peripherals including monitors, keyboards, mice, trackpads, AirPods, and HomePods., • Manage and coordinate seamless updates of macOS, iOS, iPadOS, and all Apple applications, ensuring minimal disruption while maintaining security compliance and optimal performance., • Serve as the strategic liaison between Executive Leadership and the IT Service Desk, system administration, network support, cybersecurity, architecture, and engineering teams, translating executive needs into technical requirements., • Supervise and mentor backup support technicians, ensuring consistent service quality and knowledge transfer across the executive support team., • Complete comprehensive daily checklists of proactive support tasks including system health checks, pending update reviews, and anticipatory maintenance to prevent issues before they impact executives., • Serve as a trusted technology consultant and subject matter expert, providing guidance on Apple ecosystem capabilities, device selection, workflow optimization, accessibility features, and emerging Apple technologies that could enhance executive productivity., • Provide on-site and remote support for executive presentations, board meetings, and high-stakes events, ensuring flawless technology performance using Apple devices, AirPlay, Apple TV, Keynote, and other presentation tools., • Design and implement executive technology solutions that seamlessly integrate with the Authority's enterprise infrastructure while leveraging Apple's ecosystem advantages including Continuity, Handoff, Universal Clipboard, AirDrop, and iCloud services., • Ensure all Apple technology solutions align with the Authority's hardware and software standards, security policies, data governance requirements, and regulatory compliance obligations., • Maintain detailed documentation and tracking of all executive Apple devices, configurations, third-party applications, and support incidents using ServiceNow ITSM platform., • Provide support across primary office locations, remote/hybrid work environments, and travel scenarios, maintaining consistent service quality regardless of location or circumstances., • Manage Apple Business Manager, Device Enrollment Program (DEP), Volume Purchase Program (VPP), and Mobile Device Management (MDM) solutions for executive device fleet., • Coordinate with Apple Business Support and AppleCare for Enterprise to expedite hardware repairs, replacements, and obtain expert-level technical assistance when needed. Required Qualifications: Technical Skills • Expert-level proficiency in macOS (current and previous 3 versions), including advanced system administration, Terminal/command line operations, system optimization, and troubleshooting., • Advanced knowledge of iOS and iPadOS, including configuration profiles, restrictions, and enterprise features., • Deep expertise with Apple hardware architecture, diagnostics, and repair procedures for all Mac computers and iOS devices., • Extensive experience with Apple enterprise management tools including Apple Business Manager, Device Enrollment Program (DEP), Volume Purchase Program (VPP), and MDM solutions (Jamf Pro, Intune, Workspace ONE, or similar)., • Proficiency with Apple Professional Applications including Final Cut Pro, Logic Pro, Motion, Compressor (preferred but not required)., • Advanced knowledge of iWork suite (Pages, Numbers, Keynote) and iCloud services for business use., • Expert-level proficiency in Microsoft 365 for Mac including Outlook, Excel, PowerPoint, Word, Teams, and OneDrive integration with macOS., • Strong knowledge of cross-platform integration between macOS and Windows environments, including Active Directory binding, SMB file sharing, and authentication., • Experience with enterprise collaboration platforms on Mac including Microsoft Teams, Zoom, WebEx, Slack, and their macOS-specific features and optimizations., • Proficiency with Apple security features including FileVault encryption, Gatekeeper, System Integrity Protection (SIP), Secure Boot, Touch ID, Face ID, and Keychain management., • Working knowledge of macOS networking including WiFi troubleshooting, VPN configuration, network diagnostics, AirDrop, and AirPlay., • Experience with ServiceNow ITSM platform for incident tracking, knowledge management, and executive support workflows., • Knowledge of business productivity applications on Mac including Adobe Creative Cloud (Acrobat, Photoshop, Illustrator), Microsoft Project, Microsoft Visio (via alternatives or virtualization)., • Familiarity with web browsers on Mac (Safari, Chrome, Edge, Firefox) and their enterprise management capabilities., • Advanced understanding of residential and office networking for Mac devices, including mesh WiFi systems, routers, switches, and troubleshooting connectivity issues. Essential Competencies: Professional Skills • Exceptional customer service orientation with proven ability to anticipate needs and exceed expectations of executive-level clients., • Outstanding interpersonal and communication skills with the ability to explain complex technical concepts in clear, non-technical language appropriate for executive audiences., • Demonstrated ability to quickly build trust and establish credibility with C-level executives and their administrative staff., • Highest standards of ethics, integrity, professionalism, and discretion when handling confidential and sensitive information., • Exceptional written and verbal communication skills for documentation, reporting, and executive-level correspondence., • Proven ability to remain calm, professional, and solution-focused under pressure, especially during high-visibility incidents or time-sensitive executive needs., • Advanced analytical, problem-solving, and troubleshooting capabilities with a methodical approach to complex technical issues., • Extreme discretion in handling sensitive, confidential, and proprietary information with full awareness of executive privacy requirements., • Action-oriented and results-driven mindset with ability to define innovative solutions and implement them efficiently., • Ability to work independently with minimal supervision while effectively managing multiple competing priorities and urgent requests., • Professional maturity to recognize limitations, seek assistance when needed, and leverage resources effectively to consistently achieve successful outcomes., • Strong time management and organizational skills with ability to balance proactive tasks with reactive support needs., • Flexibility and adaptability to adjust schedule for executive needs, including occasional early morning, evening, or weekend support for critical situations or events., • Professional appearance and demeanor appropriate for executive-level interactions and high-visibility environments., • Commitment to continuous learning and staying current with Apple's latest technologies, updates, and best practices.

Client Overview Our client is a company that has been a local manufacturer, running a fast-paced, high-volume plant for over 50 years. They are currently looking to add a Maintenance Supervisor to their team. They are very people-focused and boast long-term tenure among many employees. This is a highly regulated environment, operating 24/7 with one other U.S.-based location. Salary/Hourly Rate $100k - $115k plus Bonus Position Overview The Maintenance Supervisor will coach and guide the Maintenance Technicians and work shoulder-to-shoulder with them on the plant floor. This is not a desk job. Expect to spend at least half your time out at the machines, diagnosing faults, demonstrating repair techniques, and showing technicians how to solve problems themselves. You will report to the Engineering Manager and be the day-to-day leader of the maintenance crew. Your success will be measured by how well the team performs: their skills, their confidence, their safety habits, and how reliably the equipment runs because of them. The best fit is someone who gets as much satisfaction from a Technician's first solo fix as from fixing the machine themselves. Responsibilities Of The Maintenance Supervisor • Run the Maintenance team day-to-day: assign work, set priorities, and keep everyone clear on what matters most each shift., • Teach on the floor and use real breakdowns as training moments, walking technicians through your reasoning rather than simply fixing the issue., • Build and run a cross-training plan so Technicians grow across electrical, mechanical, pneumatic, hydraulic, and controls work., • Provide regular, honest feedback, recognize strong performance, and address concerns directly and fairly., • Mentor newer Technicians and prepare high performers for increased responsibility., • Build a culture of accountability where employees take pride in completing work correctly and documenting it properly., • Troubleshoot and repair production equipment, including motors, drives, sensors, PLC and control systems, and pneumatic and hydraulic circuits., • Support the upkeep of coating, laminating, converting, web-handling, winding and unwinding, and drying equipment., • Respond quickly to breakdowns, establish repair plans, and work alongside the team to restore production., • Investigate root causes of recurring failures and implement long-term solutions., • Balance emergency repairs, planned maintenance, and projects against production schedules and available resources., • Develop and enhance preventive maintenance programs to reduce unplanned downtime., • Partner with Production, Engineering, and outside contractors to plan shutdowns, repairs, and upgrades., • Maintain accurate work orders, equipment histories, and maintenance records within the maintenance management system., • Lead by example regarding OSHA and company safety standards, including Lockout/Tagout, Pre-Job Briefs, and Integrated Risk Assessments., • Coach Technicians to work safely at all times, especially during high-pressure equipment breakdown situations. Required Experience/Skills For The Maintenance Supervisor • Two or more years of experience supervising or leading a team, formally or as a Lead Technician., • Five or more years of industrial maintenance experience in a manufacturing environment., • Strong electro-mechanical troubleshooting and repair skills across motors, drives, sensors, controls, pneumatics, and hydraulics., • Proven ability to teach technical skills and explain complex problems clearly to individuals with varying levels of experience., • Ability to read and interpret electrical schematics, mechanical drawings, and equipment manuals., • Experience building or managing preventive maintenance programs., • Sound judgment and a calm, practical approach to troubleshooting and problem-solving., • Strong communication and organizational skills, along with working knowledge of Microsoft Office., • Comfortable being physically active on the production floor, including standing, walking, climbing, kneeling, working from ladders and elevated platforms, and safely using hand and power tools., • Flexibility to work scheduled shifts, overtime, weekends, and occasional emergency call-ins. Preferred Experience/Skills For The Maintenance Supervisor • Experience within a continuous-process manufacturing environment., • Experience with AC/DC drives and motor control systems., • Experience installing power and control circuits., • Familiarity with combustion systems., • Knowledge of predictive maintenance and reliability-centered maintenance practices., • Hands-on experience using a CMMS., • Experience formally training, mentoring, or developing Technicians. Education Requirements • High school diploma or equivalent is required., • Technical school coursework, an apprenticeship, or certification in industrial maintenance, electrical, or mechanical disciplines is preferred. Benefits • Client-provided benefits available, upon eligibility.

("US citizens and Green Card Holders and those authorized to work in the US are encouraged to apply. We are unable to sponsor H1b candidates at this time.”) We are currently working with a well-known supermarket chain for a Field Support Technician role, where you will be supporting retail stores in the Brooklyn area. Here are the key details: Title: Field Support Technician Location: Newark, New Jersey ( Coverage area: North Jersey) Job Type: Full-time Salary: $55,000 annually Benefits: A comprehensive benefits package is included Requirements: Bilingual (Spanish and English) and must have a valid driver’s license and personal vehicle (fuel for store-to-store travel will be reimbursed, with toll and parking expenses also covered. Please note that 10 miles will be deducted per day to account for the commute from home to office and back). Coverage Areas: North Jersey Role Responsibilities: • Act as the first point of contact for support issues across various retail stores., • Daily travel between stores in the mentioned areas is required., • Handle service tickets and work logs, including troubleshooting issues related to desktops, networks, software, and hardware., • Train employees on various applications and wireless peripherals., • Elevate complex issues to the appropriate team members., • Perform hardware and software installations., • Assist with troubleshooting desktop applications, network equipment (routers, switches, access points), and configuring Zebra handhelds and printers., • Physical capability to lift and handle hardware (like cables, printers, monitors) is required. This role requires someone who can interact effectively with store employees, many of whom primarily speak Spanish. The ability to communicate fluently in both English and Spanish is a key requirement for this position. A reasonable, good faith estimate of the minimum and maximum annual salary for this position is $55,000 with full benefits(401k, health care, dental, vision, PTO, Flex days, vacations.) Job Type: Full-time Job Type: Full-time Pay: $55,000.00 per month

Fulltime Salary plus Benefits Salary Range $55k - $60k a year Job description: Key Responsibilities • Manage and coordinate the day-to-day schedules of technicians and engineers through Autotask., • Continuously review Autotask service queues throughout the day to ensure tickets are being assigned, scheduled, and addressed by the appropriate resources., • Assign and schedule service tickets based on priority, SLA requirements, technician availability, technical skill set, geographic location, client requirements, and overall Service Department workload., • Maintain accurate and up-to-date technician calendars, schedules, ticket assignments, and availability within Autotask., • Monitor technician workloads and balance assignments across the team to ensure resources are being utilized effectively and workloads are distributed appropriately., • Adjust schedules throughout the day when emergencies, escalations, Priority 1 incidents, technician callouts, project requirements, or higher-priority client issues arise., • Maintain appropriate Service Desk coverage throughout the business day and proactively identify resource or scheduling gaps before they impact service delivery., • Coordinate onsite visits, remote support sessions, scheduled service work, installations, maintenance, client onboarding, and project-related assignments., • Monitor new, open, unassigned, and unscheduled tickets and ensure they are addressed or scheduled within appropriate timeframes., • Monitor aging tickets and follow up when tickets have remained open too long, have not been scheduled, lack appropriate activity, or require additional attention., • Monitor SLA requirements and assist with ensuring tickets are assigned and scheduled within required response and service timeframes., • Work closely with Service Department leadership and the Service Desk to determine technician priorities and where resources are most urgently needed., • Coordinate with the Projects team when technicians or engineers are required for project-related work while ensuring appropriate Service Desk coverage is maintained., • Ensure technicians have the necessary ticket information, client details, scheduling information, equipment requirements, and other relevant information prior to scheduled work, onsite visits, or client appointments., • Communicate scheduling changes, conflicts, assignments, and priorities to technicians and other team members as needed., • Escalate resource shortages, scheduling conflicts, overdue tickets, coverage concerns, or other service delivery issues to management when necessary., • Plan ahead for PTO, training, meetings, projects, client onboarding, scheduled maintenance, and other events that may impact technician availability., • Track technician availability and utilization within Autotask to support effective resource planning and workload management., • Work with management to review upcoming workload and identify when additional resources, coverage changes, or scheduling adjustments may be required., • Help maintain accurate ticket information, scheduling details, resource assignments, and calendar entries within Autotask., • Support the coordination of resources requested by the Projects team, Account Management, Client Technology Managers, and other internal departments., • Help maintain communication between the Service Desk, Projects, Account Management, technical teams, and Service Department leadership., • Identify opportunities to improve scheduling, dispatch, resource utilization, and overall workflow within Autotask., • Communicate directly with clients by phone or email when necessary to coordinate appointments, provide scheduling updates, or set expectations regarding service requests., • Assist with the preparation and distribution of operational reports as required., • Receive and document equipment arriving at the office when necessary., • Provide backup support for other Resource Coordinators or team members during PTO, illness, or periods of increased workload., • Perform other duties as assigned. Position Requirements • Previous experience in scheduling, dispatch, service coordination, resource management, or a similar role preferred., • Experience working within an MSP, IT Service Desk, or technical support environment strongly preferred., • Experience with Autotask PSA preferred., • Strong organizational and scheduling skills with the ability to manage multiple priorities simultaneously., • Ability to work effectively in a fast-paced, high-pressure environment where priorities may change throughout the day., • Strong customer service and client communication skills., • Ability to communicate professionally with clients, technicians, managers, and senior executives., • Strong problem-solving, analytical, and decision-making skills., • Ability to prioritize work based on urgency, SLA requirements, business impact, technician skill set, availability, and client needs., • Strong attention to detail and documentation skills., • Ability to work independently while also functioning effectively within a team environment., • Highly self-motivated, organized, and capable of taking initiative., • Comfortable learning technical terminology, hardware concepts, and IT service processes., • Working knowledge of Microsoft Office, including Outlook, Excel, Word, and Teams., • Knowledge of PC hardware, networking terminology, and general IT concepts preferred.

Join Our Team as an Industrial Hygienist! Are you ready to elevate your career with a dynamic and growing firm that values your contributions and offers exciting opportunities for advancement? Hillmann Consulting, LLC, a leading nationwide environmental consulting firm, is seeking a passionate and driven Industrial Hygienist to join our team in the North Jersey and NYC areas. Why Hillmann Consulting? At Hillmann, we believe in fostering a collaborative, team-oriented environment where your career can thrive. With over 40 years of experience, we specialize in Environmental Health and Safety, Remediation Support, Real Estate Due Diligence, Geotechnical, and Laboratory Analysis services. Our work spans from emergency planning for major disasters to ensuring compliance with federal and state regulations, including OSHA, DOT, and USEPA. Visit the Life tab on our LinkedIn profile to learn more about life at Hillmann. What We Offer: • Career Growth: We empower you to drive your own career path with continuous learning and professional development opportunities., • Exciting Projects: Work on a variety of impactful projects, from disaster response to environmental assessments, in both local and nationwide contexts., • Comprehensive Benefits: Competitive salary, medical, dental, and vision insurance, employer-401(k) plan, tuition assistance, and volunteer time. Who We’re Looking For: A motivated individual who thrives in a fast-paced environment and adapts well to change. You should possess excellent organizational skills and a strong commitment to customer service and safety. Candidates must be able to work with minimal supervision, learn quickly, and possess excellent problem-solving skills. Qualifications: Education: • Associate’s, Bachelor’s, Master’s, or equivalent degree in a Science-related field. Experience: • 1 to 4 years in the industry, with a focus on asbestos, lead, indoor air quality, and mold/moisture inspections. Skills: • Excellent communication, • Client management, • Proficiency in Microsoft Office and Excel. Certifications: • Lead: Inspector/Assessor or Sampling Technician preferred., • Additional certifications like CHMM, 40 Hour HAZWOPER, 10/30 Hour Construction Safety, and CIE/CMI are desirable but not required. Other Requirements: • Mastery of the English language – written and spoken., • Valid driver’s license., • Reliable transportation., • Ability to frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 50 pounds., • Ability to occasionally work at heights greater than 6 feet (examples: ladders, rooftops, man-lifts, scaffolding)., • Ability to occasionally work in confined spaces (examples: crawlspaces, attics)., • Ability to frequently reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl., • Must be able to walk up/down multiple flights of stairs., • Ability to complete all mandatory trainings, including safety training., • Availability for off-hour emergency work., • Respond as a member of the Hillmann 24-hour disaster response team. *We welcome candidates with initial asbestos AHERA certifications eligible for state certification tests. Responsibilities: • Maintain certifications and licenses., • Respond to client emergencies as needed., • Conduct thorough investigations related to Industrial Hygiene, including indoor air quality, mold/moisture inspections, asbestos surveys, and lead-based paint inspections., • Develop remediation plans, report findings, and ensure compliance with industry guidelines., • Collect air samples during asbestos abatement work to verify compliance with local, state and Federal regulations including background, daily and clearance air monitoring; accurately completing project records, log books and chain of custody forms; and timely submission of samples and required project documentation., • Perform air and bulk sampling according to EPA, OSHA, NIOSH, and industry analytical methods., • Perform limited asbestos containing material surveys., • Perform employee exposure monitoring for various environmental hazards., • Perform other responsibilities as assigned. At Hillmann Consulting, LLC, we are committed to your professional development and well-being. Join us and make a difference with a company dedicated to excellence and innovation in environmental consulting. Ready to Apply? Submit your application today and take the next step in your career with Hillmann Consulting, LLC. We look forward to welcoming you to our team! Hillmann Consulting, LLC is an equal opportunity employer.

Job Description Our client is a ommercial and industrial boiler contractor serving building owners, property managers, hospitals, universities, manufacturers, and process facilities across New Jersey and the greater New York metropolitan area. Our work spans new boiler and boiler room installations, code repairs and alterations to pressure-retaining equipment, burner and controls retrofits, preventive maintenance agreements, emergency service, and efficiency upgrade projects. We are seeking a General Manager to take full operational and financial ownership of the business. This is a true P&L role. You will run service, construction, and shop operations day to day, own the numbers that ownership sees every month, protect and advance our code certifications, and build a durable leadership culture in a trade where skilled labor is scarce and loyalty is earned rather than bought. The right person is equal parts operator, financial thinker, and people leader — comfortable in a boiler room at 2 a.m. and in front of a spreadsheet the next morning. This role exists to professionalize how the business runs without breaking what already works. You will inherit experienced field technicians and long-standing customer relationships. Your job is to raise margin, tighten execution, and modernize systems while keeping the crew intact and the phone answered. Core Responsibilities Profit & Loss Ownership You own the P&L outright — top line, gross margin, overhead, and net. You will be accountable for annual budgeting, monthly forecasting, and the variance conversations that follow when actuals miss plan. • Build and defend the annual operating budget across every revenue line: service labor, preventive maintenance agreements, projects and retrofits, parts and equipment sales, rental, and shop work., • Own gross margin by division and by job. Understand where margin is made and where it leaks — mispriced service calls, unbilled work, warranty rework, unmanaged overtime, change orders never captured., • Manage work-in-progress and percentage-of-completion reporting on project work, including over/under billings, cost-to-complete accuracy, and backlog quality., • Drive cash performance: billing velocity, DSO, retainage recovery, unbilled revenue, and vendor terms., • Approve pricing, quoting standards, labor rates, and markup structures; make the call on which work is worth chasing and which is not. Financial Reporting & Analysis Produce the monthly financial package that ownership relies on to make decisions. This is not accounting support work — you are expected to build the reporting, interpret it, and act on it. • Assemble and present a monthly package including P&L with budget variance, gross margin by revenue line, backlog and WIP schedules, cash flow and aging, and KPI dashboards with commentary on what moved and why., • Build the operating metrics that run the business: technician billable utilization and labor efficiency rates, revenue per technician, first-time fix rate, callback percentage, average service ticket, quote-to-close conversion, PM agreement renewal and attachment rates, and overtime as a percentage of field labor., • Prepare capital request business cases for fleet, tooling, shop capacity, and headcount, with payback and return expectations stated plainly., • Develop customer-facing financial proposals for capital projects — installed cost, projected fuel and efficiency savings, simple payback and lifecycle cost, and applicable utility incentive and rebate capture. Operations, Code Compliance & the R Stamp Program You are the executive owner of our quality and code program. You are not expected to personally perform inspections or weld, but you are expected to understand what our certifications require and to make sure the organization never puts them at risk. • Maintain the integrity of the company’s National Board R Certificate of Authorization: enforce the Quality Control Manual in daily practice, support the designated QC Manager, manage the relationship with our Authorized Inspection Agency, and lead preparation for triennial National Board review and renewal audits., • Ensure repairs and alterations to pressure-retaining items are performed and documented to NBIC (NB-23) requirements, including R-1 and R-2 form execution, proper nameplate and stamping practice, and complete traceability of materials and welder qualifications., • Govern the welding program: ASME Section IX WPS, PQR, and welder performance qualification currency; continuity logs; and NDE coordination with third-party testing partners., • Apply ASME Section I, Section IV, and Section VIII Division 1 requirements appropriately across power boilers, heating boilers, and pressure vessels., • Enforce ASME CSD-1 controls and safety device requirements and NFPA 85 combustion safety practice on automatically fired equipment., • Own field execution across service dispatch, project scheduling, manpower planning, procurement and equipment lead times, subcontractor management, fleet, and shop throughput., • Own safety outcomes and the metrics that follow the company into every bid: TRIR, DART, and Experience Modification Rate. Lockout/tagout, confined space entry for boiler and vessel work, hot work, and respiratory protection are non-negotiable disciplines. Team Leadership & Change Management The technical problems in this business are solvable. The people problems are the hard part, and they are the reason this role exists. We are looking for high emotional intelligence — someone who reads a room, hears what a technician is actually saying under a complaint, and can hold a hard line without humiliating anyone. • Lead a multi-disciplinary team spanning field service technicians, boilermakers and welders, project managers, estimators, dispatch, and administrative staff., • Introduce process, measurement, and accountability into an environment that has historically run on relationships and tribal knowledge — and do it in a sequence the team can absorb. Sequencing and communication matter more than the changes themselves., • Build the succession bench: recruit, develop, and retain technicians in a labor market where the experienced boiler mechanic pool is shrinking and every competitor is fishing in the same pond. Own the apprenticeship and mentoring pipeline., • Set clear performance expectations, run consistent one-on-ones and reviews, coach the willing, and move decisively on the unwilling., • Serve as the escalation point for customer conflict, jobsite disputes, and internal friction — de-escalating without conceding margin. Commercial Growth & Customer Retention • Grow recurring revenue through preventive maintenance agreements and full-coverage service contracts; improve renewal rates and expand scope within existing accounts., • Support estimating and bid strategy on larger installations and retrofits; sit at the table on the accounts that matter., • Position the company on efficiency-driven work — burner and controls upgrades, condensing economizers, boiler plant optimization, fuel conversions, and decarbonization retrofits — where regulatory pressure is generating demand., • Maintain relationships with OEMs, distributors, engineering firms, mechanical contractors, and property management groups. Requirements Required Qualifications • Ten or more years of progressive operations leadership in commercial or industrial boiler, mechanical HVAC, power generation, or process piping contracting, including at least five years with direct P&L accountability., • Demonstrated experience operating inside an R Stamp certified organization — you have lived under a Quality Control Manual, worked alongside an Authorized Inspector, and been through a National Board review., • Working command of ASME Boiler and Pressure Vessel Code and the National Board Inspection Code as they apply to repair, alteration, and new installation., • Track record of improving gross margin and operating income in a service-and-project business, with specific numbers you can speak to., • Proven ability to build financial reporting from operational data and present it credibly to an owner, board, or private equity sponsor., • Experience leading fifteen or more employees across field and office functions, including hiring, development, and performance management., • Fluency with service management and ERP platforms and the discipline to make a team actually use them., • Bachelor’s degree in engineering, construction management, business, or a related field — or an equivalent combination of trade credentials and operating experience., • Valid driver’s license and willingness to be present in the field and at customer sites throughout the NJ/NY territory. Preferred Qualifications • Direct experience managing or holding responsibility for an R Stamp quality program, including manual authorship or revision and audit preparation., • Additional ASME certifications in the organization’s scope, such as S, U, PP, or A stamps, and National Board VR experience., • Prior background as a boiler technician, boilermaker, welder, or field service engineer before moving into management., • Experience with combustion analysis, boiler efficiency testing, stack loss and thermal efficiency measurement, O2 trim, turndown optimization, and heat recovery., • Union contract administration experience in the NJ/NY market., • Formal change management, Lean, or continuous improvement training., • Experience integrating an acquired business or standing up new systems and processes post-acquisition. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Compensation: $100,000 - 150,000 base salary + bonues and car allowance

Job DescriptionParatransit General Manager Location: Cranford, NJ Pay: $80,000 - $90,000 Employment Type: Full-Time About the Role The Paratransit General Manager is responsible for leading all aspects of daily paratransit operations, with a focus on safe, reliable service, contract compliance, customer satisfaction, employee performance, and financial results. This role serves as the primary operational leader for the location and works closely with the customer, local leadership, employees, and support teams to ensure service expectations and contractual requirements are consistently met. Key Responsibilities • Lead daily paratransit operations and ensure safe, reliable, and efficient service., • Maintain compliance with contractual requirements, company policies, ADA requirements, and applicable federal, state, and local regulations., • Build and maintain a strong working relationship with the customer and serve as a primary point of contact for operational matters., • Lead, coach, and develop location leadership and frontline employees., • Oversee staffing levels, scheduling, employee performance, attendance, and workforce planning., • Monitor operational performance and implement corrective actions when service or performance expectations are not being met., • Maintain a strong safety culture and ensure established safety processes and procedures are followed., • Partner with Safety, Maintenance, Human Resources, Recruiting, Finance, and other support functions., • Manage location financial performance, including labor, operating expenses, productivity, and budget performance., • Identify opportunities to improve service quality, efficiency, employee engagement, and customer satisfaction.What Success Looks Like, • Safe and reliable transportation service, • Strong contract and regulatory compliance, • Consistent achievement of operational performance goals, • Effective staffing and employee retention, • Strong customer relationships, • Responsible financial management, • A well-developed and accountable leadership teamQualifications, • 5+ years of transportation, paratransit, transit, or related operational leadership experience., • Experience managing a contract-based transportation operation preferred., • Knowledge of ADA requirements and demand-response or paratransit operations., • Demonstrated experience leading large teams and managing staffing, employee performance, and labor-related issues., • Experience with collective bargaining, union environments, or union labor relations a plus., • Strong financial and operational management skills., • Strong communication, leadership, problem-solving, and customer relationship skills., • Valid driver's license required., • CDL or ability to obtain appropriate licensing may be required based on location and operational needs.Physical Requirements and Working Conditions This position operates in both an office and transportation operations environment and may require regular interaction with employees, customers, vehicles, and operating facilities. Availability outside normal business hours may be required based on operational needs. Why Join First Student First Student offers the opportunity to lead a critical transportation operation while working with a team focused on safety, service, accountability, and operational excellence. As General Manager, you will have direct influence over employee experience, customer relationships, service performance, and the overall success of the location. Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this position at any time. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description Northern NJ Mobile Maintenance/Porter Technician A privately owned regional commercial real estate management group is looking for a full-time Mobile Maintenance/Porter Technician to oversee and perform duties related to the overall maintenance of the Northern New Jersey commercial retail, office and industrial properties. Qualifications and Requirements • Candidate must be a self-starter, possess a valid driver’s license and speak English fluently., • Ability to professionally interact with tenants on site., • Position includes physical labor, light construction, light carpentry, general plumbing, minor HVAC and electrical, walking, climbing ladders, porter services., • Must have the ability to use a smartphone to document conditions and report to the Maintenance Supervisor and Property Manager., • Software interaction with email, smart phone, RealPage Commercial Mobile Maintenance app., • Candidates are expected to provide their own basic hand and power tools, such as a drill, hammer, screwdriver set, and other standard tools necessary to perform routine maintenance and repairs., • No prior criminal convictions. Job Responsibilities Include but Are Not Limited To: • Requires driving from property to property performing various maintenance and porter tasks., • Company Vehicle will be provided during working hours, must have personal transportation to and from work., • Maintain work truck and all equipment., • Ability to professionally interact with tenants on site., • Position requires the performance of maintenance work inside and outside of properties., • Maintenance task changes daily based on what is needed. Tasks include but not limited to, physical labor, walking, climbing ladders, minor roof maintenance, door lock replacements, minimal carpentry, sheetrock, and painting, porter services to maintain a clean exterior appearance such as litter clean up, graffiti removal, sticker removal, storefront glass and frame cleaning, weed killer, etc. vacant space cleanliness, providing access for vendors, utility companies, town inspectors etc., • Able to complete service requests issued by commercial team, in a timely and efficient manner., • May require occasional after-hours duties during emergencies., • Able to provide technical information and recommendations to executive management., • Use of ladders will be frequently required in this position. Experience and Education Requirements • Minimum of 3-5 years of experience., • High school diploma required., • Vocational or trade school certifications are a plus., • Previous retail buildout experience a plus.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary, • Free uniforms, • Paid time off, • Health insurance, • ???? Job Description – Pool Cleaner / Valet Technician, • Position Overview We are seeking a reliable and detail-oriented Pool Cleaner / Valet Technician to join our team for the seasonal pool service period. This role involves performing routine pool cleaning, water chemistry balancing, equipment inspections, and customer service support. The ideal candidate will be punctual, safety-conscious, and able to deliver excellent service to our customers. Key Responsibilities • Read all notes on tickets prior to leaving for the day and prepare for the route, • Upon arrival, ring the bell (unless otherwise noted) and announce service visit, • Vacuum, skim, and brush pool at each visit, • Empty pump and skimmer baskets each visit, • Backwash and clean cartridges as needed, • Inspect pool equipment and report issues that cannot be fixed during the visit, • Perform water chemistry checks and balance as required, • Complete water analysis report with notes of work performed, issues found, and customer expectations; leave a copy for the customer, • Contact the office and speak with the In-House Mechanic when unsure of procedures, • Adhere to all safety guidelines, • Start time is 7:30 AM; technician must be on the road to the first job site by 8:00 AM (deductions apply if not adhered to), • Provide at least two weeks’ notice for personal day requests, • Obtain supervisor approval for any job changes between technicians, • Notify office immediately of any accidents or incidents with company vehicles, • Compensation & Benefits, • Hourly Rate: $20–$24 per hour (depending on experience), • Annual Bonus, • 401(k) Employer Contribution, • Medical Insurance Reimbursement: $200 per month, • Seasonal Position (April–October), • Qualifications, • High School diploma or equivalent, • Prior pool cleaning or maintenance experience preferred, • Ability to lift 50–75 lbs. unassisted, multiple times per day, • Ability to frequently reach, stoop, bend, and kneel daily, • Ability to withstand extensive walking and standing daily, • Excellent customer service skills, • Proficiency with basic computer systems

Job Description About the job: We are searching for highly skilled House Cleaning Technicians, house cleaners, and housekeepers who take pride in their work. You will be responsible for cleaning, vacuuming, washing, dusting, mopping and sanitizing all areas and surfaces of our clients’ homes, apartments and small offices. What does it pay? We pay an average of $18-$22 per hour, plus benefits. That's about $700-$900 per week plus tips every week. Why work with us? We believe if our employees are happy, they’ll do their work with passion while we help them accomplish their goals and dreams. We also understand what it takes to be a good cleaning technician, which is why we respect, value and pay very well for great talent. Benefits: Disability insurance and on-the-job accident protection. Get paid and learn: Your training will be paid ($10-12/hr). No experience is required. Applicants must be used to physical labor, standing for 6-8 hours a day. Job Security: The cleaning industry is considered essential labor! It’s the best time to join us, and it’s a job that will always be needed. Paid vacation: Enjoy one week of leisure time to rest or spend quality time with your loved ones; available after 12 months of consecutive employment. Two weeks are paid after 3 years of employment. Weekly ACH payment: You will receive a weekly payment (direct deposit to your bank account). Family-friendly schedule: You’ll have 6 national holidays off and 5 pre-approved days for personal appointments. Do I work alone or on a team? Cleaning jobs are mostly performed “solo,” or by one technician. In the event of larger jobs, you’ll be assigned to a team. You must have your own car to be able to carry cleaning supplies and mobilize to the work sites. All of the teams are dispatched from our office or your home directly to customer locations. How do I check my schedule? We use a scheduling app on our phones, where you can easily pull up your daily schedule. How do I get paid? We pay using direct deposit to your bank account. We use a digital payroll system where you’ll be able to see your weekly payment and pay stubs. Job requirements: Over 21 years of age Free of drugs and felonies Authorized to work in the US (citizenship, residence, work permit) Must own a vehicle and smartphone Valid car insurance and driver's license Verifiable work history and references, preferably 1 year or more Excellent attitude and work ethic Join our team by applying below. Questions? Please contact our office. Housecleaner - House cleaning jobs - House cleaning technician jobs - Housekeeping jobs - Janitorial Cleaner - Professional House Cleaner - Residential cleaner - Part time maid - Hotel housekeeping jobs

Job Description Join our dynamic team as a Traffic Control Technician and play a vital role in ensuring safety and efficiency on construction sites and roadwork projects. In this energetic position, you will be responsible for directing traffic, setting up safety signage, and assisting heavy equipment operators to maintain smooth workflow. Your proactive approach will help protect workers, motorists, and pedestrians while supporting the successful completion of infrastructure projects. This paid position offers an exciting opportunity to develop your skills in heavy equipment operation and construction safety. This role involves managing lane closures throughout New York, New Jersey, Delaware, and Pennsylvania. The compensation structure is as follows: • Starting Rate: $17 per hour., • One Month: Increases to $18 per hour after all required documentation has been submitted, • 60 Days: Upon running your own crews, the rate moves to $20 per hour., • Six Months: After obtaining TCC certification and moving to STCC classification, the rate increases to $25 per hour, • Prevailing Wage: We also offer prevailing wage opportunities starting at $100.00 per hour. Please note that this is a full-time, on-call position with shifts that vary between days and nights each week. Candidates must be available for both day and night work To proceed with your phone interview, please call our office at [Office Phone Number] between 9:00 AM and 4:00 PM, Monday through Friday. Duties • Set up and maintain traffic control devices such as signs, cones, barrels, and barriers to guide vehicles and pedestrians safely around construction zones, • Direct traffic flow using hand signals or flagging equipment to ensure safety for workers and the public, • Assist with the operation of heavy construction equipment including dozers, loaders, backhoes, graders, front loader trucks, dump trucks, and paving machinery when necessary, • Conduct utility locating to identify underground utilities before excavation or construction activities begin, • Support construction crews by providing safe access routes and coordinating vehicle movements on-site, • Monitor work zones continuously to ensure compliance with safety regulations and company policies, • Maintain detailed records of daily activities, safety inspections, and equipment usage Qualifications • Valid Drivers License with less then points, • Availability to work days and nights and very little weekends, • Able to carry 30lbs over your head, • Able to get into a truck and out of a truck, • English is the first language learned, • Have own vehicle to arrive to our hub, • Can pass random drug tests, even marijuana Embark on a rewarding career that combines safety leadership with hands-on construction experience. We’re dedicated to supporting your growth while ensuring every project runs smoothly. Join us today to be part of a team committed to building safer roads and communities!

Job Description Everleap Fertility is currently seeking an Andrology Lab Technician to join our Jersey City, NJ location! This is a full-time position Monday-Friday 5:30am-1:30pm with rotating weekend and holiday coverage in Basking Ridge, NJ. As an Andrology Laboratory Technician, you will play an important role in helping individuals and families achieve their dreams of parenthood. Working alongside fertility specialists and laboratory professionals, you will perform Andrology and Endocrine laboratory testing while maintaining the highest standards of quality, accuracy, and patient care. The Andrology Laboratory Technician follows the laboratory’s procedures for specimen handling and processing, reporting and maintaining records of patient test results. Attention to detail is essential with these duties. The Andrology Lab Tech will be responsible for serving patients by providing precise and accurate laboratory results for the purpose of infertility assessment and management. This role is responsible for performing Andrology and Endocrine laboratory services in accordance with the Laboratory Procedure Manual. Essential Functions and Accountabilities: • Maintains accurate and current records of patient reports and inventory., • Adheres to the laboratory’s quality control policies; documents all quality control activities, as well as all instrument and procedural calibrations and maintenance performed., • Follows the laboratory’s policies and procedures whenever test systems are not within the laboratory’s established, acceptable levels of performance., • Studies and remains current and knowledgeable with the Laboratory Operating Manual regarding quality assurance, quality control, safety procedures and operating guidelines for performing all assigned laboratory services., • Holds a comprehensive understanding of and follow all OSHA requirements for safe laboratory operations to maintain a safe laboratory environment., • Assures quality care by adhering to therapeutic standards; follows practice, physician and laboratory division philosophies, as well as standards of care set by the state and other governing agency regulations., • Works cooperatively with the Company multidisciplinary teams to provide good patient care and achieves the objectives and goals of the practice., • Maintains patient confidence and protect operations by keeping all patient and proprietary information confidential. Adheres to signed HIPAA Confidentiality Agreement. Academic Training: • Bachelor’s Degree in a chemical, biological, clinical laboratory science or related – required Position Requirements/Experience: • Minimum 6 months’ laboratory training towards degree or experience in a clinical or research lab – preferred Technical Skills: • Electronic Medical Records experience - preferred, • Excel at Microsoft Office Suites (Word, Excel, Power Point, Outlook), • Ability to operate laboratory equipment, hormone analyzers and microscopes Everleap Fertility offers a comprehensive benefits package to all employees who work a minimum of 30 hours per week. • Medical, Dental, Vision Insurance Options, • Retirement 401K Plan, • Paid Time Off & Paid Holidays, • Company Paid: Life Insurance & Long-Term Disability & AD&D, • Flexible Spending Accounts, • Employee Assistance Program, • Tuition Reimbursement Everleap Fertility: Built on the legacy of RMA, Boston IVF, Conceptions, and six other leading North American fertility practices, Everleap Fertility brings together more than 200 physicians and embryologists across 60+ locations in the U.S., including 25 IVF laboratories focused on the next leap forward in reproductive medicine. Together, we have helped hundreds of thousands of patients build families for more than 40 years. As part of IVI Institute, Everleap Fertility contributes to a global community working together to advance the field and bring progress in reproductive medicine into patient care. Equal Employment Opportunity Statement Everleap Fertility is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Everleap Fertility is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Everleap Fertility are based on business needs, job requirements and individual qualifications, without regard to race, color, religion and/or belief, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Everleap Fertility will not tolerate discrimination or harassment based on any of these characteristics. Everleap Fertility encourages applicants of all ages. Monday-Friday 5:30am-1:30pm with rotating weekends and holidays

Job Description LEAP leads the world in the development and sale of cloud based legal practice management software for small law firms on a Software as a Service (SaaS) model. We employ more than 1000 people globally, have offices in the USA, Australia and the UK with more than 12,000 law firms using our software worldwide. We are seeking a Helpdesk Technician to join our highly motivated, high velocity and growing team on a hybrid work model. LEAP will provide you with the best training, equipment, mentoring and support in order for you to be successful. We employ people who are smart and can get things done. The Helpdesk Technician will focus on guiding LEAP customers for various use and installation related questions. The candidate should be able to understand customer's need related to particular product use and maintain a product log capturing any identified issues or new feature requests. Once fully trained, this role will be working a remote 40-hour week shift pattern from 9-6pm daily. Candidates using AI during the interview process will not be considered, and all interviews will take place by zoom, with a final in person interview in our Jersey City office. Responsibilities and Duties (including but not limited to) • Provide client support and technical issue resolution via email, phone and chat, • Understand client's business/software needs, • Resolve technical issues by guiding clients with specific features of LEAP software products, • Proactively improve LEAPs self-support centre by developing better self-help material (written how-to articles, demo videos, etc), • Able to work independently and efficiently to meet deadlines. All training will be provided. Requirements • 1 years’ customer service experience required. Accounting or Law would be an advantage but not essential., • Excellent communication, customer service and writing skills are essential. A large portion of the time is spent on phone and chat with helping customers., • Demonstrated knowledge of SQL and Access databases., • Must be computer proficient with basic computer troubleshooting knowledge such as how to manage files, folders, network drives, folder maps, installation issues etc., • Experience with Microsoft products including MS Word and Excel., • Demonstrate strong collaborative teamwork and people skills., • Excellent collaborative spirit., • A clear understanding of LEAP culture., • Thrives working with an intellectually stimulating, high-energy team., • Attention to detail, ability to manage time effectively, ability to work independently but within a team environment., • Ability to meet deadlines and commit to team goals., • Must be based in the Tri-State area. While the role is 100% remote, there may be annual in person training that takes place in our Jersey City headquarters. Benefits • Medical, Dental and Vision Plans Available, • 401k with Company Matching Program, • Virtual Staff Events, • Employee Assistance Plans, • Flexible Annual Leave, • Company Shares Opportunity, • Salary $56-62k OTE We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age. We look for the best person for the job. To ensure a fair and authentic recruitment process, candidates are expected to represent their own skills and experience throughout; the use of AI to generate application materials or provide real-time assistance during interviews or assessments may result in removal from the recruitment process.

Job Description Credit-Free Healthcare instructor (EKG, Phlebotomy, Medical Assistant) Department: Workforce Development Reports to: Director of Workforce Development Classification: Part-time, 1099-contractor Salary: $35 - $45/hour depending on experience Schedule: Flexible/maximum 29 hours per week Who We Are JVS repairs the world, one person at a time: allowing our program participants to achieve the highest degree of independence and dignity. Our staff of more than 50 skilled professionals work with a diverse range of individuals in need of employment, training, refugee services, education, disability services and other specialized services. Learn more at: www.jvsnj.org The Role This is a part-time contractor instructor role for credit-free healthcare programs. As an instructor, this position will be expected to provide training through a variety of modalities, including online and in-person. Training would take place at our East Orange location. The ideal candidate will have a strong background in healthcare training and working with employers in the field. This role is expected to create and provide a syllabus for students, adhere to the curriculum for the class, assess student learning, and maintain a positive learning environment. This is a grant funded position. Essential Functions · Provide classroom instruction to adult credit-free Patient Care Technician students utilizing an approved training curriculum and materials · Deliver lectures using up-to-date hands-on techniques · Knowledge of best practices in the field · Plan, prepare, and deliver approved curriculum · Plan and organize instructional materials/supply inventories/tools/equipment (notify lack of supplies in a timely manner) · Prepare lesson plans · Provide and maintain a clean environment after each class · Track and report student grades and attendance · Lead, inspire, motivate, and advise students to actively participate in all aspects of their educational process · Provide regular, accurate, and timely feedback to students and the school concerning academics, behavior, and poor attendance · Participate in professional development trainings · Other duties as assigned Qualifications & Experience · Minimum of an Associate’s Degree required · National Health Association (NHA) Certification · Have a proven track record in assisting students successfully pass the NHA exam · Must have a minimum of 3-5 years of hands-on experience in the field and teaching EKG, Phlebotomy, or Medical Assistant · Must be able to develop and maintain excellent relationships with a diverse staff and student population · Must possess excellent verbal and written communication skills · Ability to multi-task in a fast-paced environment · Consistently demonstrate the highest levels of integrity · Possess strong interpersonal skills · The ability to work effectively with and support students from diverse backgrounds · Maintain a strong presence and have excellent skills in teaching · A flexible schedule, mornings, evenings, and or weekends · Proficient in Microsoft Office (i.e Word, Excel, Teams, etc) · Must be highly organized and detail-oriented · Excellent organizational skills · Passion for education and a commitment to student success JVS of Metrowest is an Equal Employment Opportunity Employer committed to excellence. Employment offers are made on the basis of qualifications and without regard to race, sex, religion, national or ethnic origin, disability, age veteran status, or sexual orientation or other protected classes under the State and Federal law. Powered by JazzHR 5AhUkS8uVe

Job Description Firm looking for qualified MBE/WBE/SDVOB subconsultants to join our team in providing eligible candidates for work in the Port District. Concrete field/asphalt plant inspector Experience/Certification Level required: • ACI Concrete Field Testing Technician – Grade I, • NJSAT Asphalt Plant Level 1 & 2, • Radiation Safety-Nuclear Density Gauge Certified, • Efficient in the Marshall Method – ASTM C6926 - Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus, • Perform AASHTO Resource Annual Accreditation equipment calibrations., • Efficient in preparing samples for ASTM C4867 - Standard Test Method for Effect of Moisture on Asphalt Mixtures, • Able to cut asphalt cores and prepare for bulk specific gravity of in place densities in accordance with ASTM D2726 - Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive, • OSHA 10, • OSHA 30, • Current with Secure Workers Access Consortium Equipment required: All proper PPE (i.e. safety boots, reflective vest, safety glasses, hard hat, etc.) Concrete field inspector/lab technician Experience/Certification Level required: • ACI Concrete Strength Testing Technician, • ACI Concrete Field Testing Technician – Grade I, • ACI Aggregate Base Testing Technician, • NJSAT HMA Construction Technologist, • Knowledge of AASHTO Resource Annual Accreditation for equipment calibration., • AASHTO Resource CCRL- Rebar measurements., • Knowledge of Portland cement testing, • Efficient in performing ASTM C1202 - Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration., • Efficient in performing ASTM C215 - Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens, • Efficient in performing ASTM C666 - Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, • Efficient in performing ASTM C157 - Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, • OSHA 10, • OSHA 30, • Current with Secure Workers Access Consortium Equipment required: All proper PPE (i.e. safety boots, reflective vest, safety glasses, hard hat, etc.) \nCompany Description Key-Tech has been engaged in the field of construction testing, inspection, and related laboratory services since 1970. Our headquarters, which consists of a modern office and full laboratory, is located in Keyport, New Jersey. Here at Key-Tech, our goal is to provide our customers with high-quality construction testing methods at a fair price. We strive to provide our over 500 clients with service that is consistently timely, accurate, and dependable. Key-Tech has been engaged in the field of construction testing, inspection, and related laboratory services since 1970. Our headquarters, which consists of a modern office and full laboratory, is located in Keyport, New Jersey. Here at Key-Tech, our goal is to provide our customers with high-quality construction testing methods at a fair price. We strive to provide our over 500 clients with service that is consistently timely, accurate, and dependable.

Job DescriptionDescription: Evident Process Heat and Power is seeking a Field Service Manager to lead and support our team of field service technicians. This is an excellent opportunity for an experienced technician who is looking to step away from hands-on field work and travel, while still leveraging their technical expertise to mentor, coordinate, and support field operations. The Field Service Manager will oversee daily field service activities, manage scheduling and resources, and act as a key point of contact between our customers and the company. This position requires exceptional organizational skills, clear and effective communication, and a strong commitment to customer satisfaction. Key ResponsibilitiesTeam Leadership & Support • Supervise and mentor field service technicians, providing guidance, coaching, and technical support., • Assist with onboarding and training of new technicians., • Foster a positive and collaborative work environment. Operational Management • Coordinate and schedule field service work, ensuring timely response to customer needs., • Track and manage service projects, parts, and equipment readiness., • Maintain accurate service records, reports, and metrics. Customer Relations • Serve as the primary point of contact for customers regarding field service work., • Communicate service status, schedules, and expectations clearly and professionally., • Address customer concerns promptly and ensure high levels of satisfaction. Process Improvement • Identify opportunities to improve field service efficiency, safety, and quality., • Collaborate with other departments (engineering, sales, operations) to resolve recurring issues. Requirements: Required • Strong background as a field service technician (industrial equipment, process systems, or similar)., • Excellent organizational, scheduling, and problem-solving skills., • Clear and professional written and verbal communication abilities., • Customer service mindset and ability to build strong relationships. Preferred • Previous experience managing or leading field service technicians., • Familiarity with service scheduling systems, ERP software, and Microsoft Office tools., • Understanding of safety standards and compliance practices.

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools is seeking a HVAC Operating Engineer to join the charter network’s New Jersey Facilities team. This position provides an opportunity for an experienced HVAC Operating Engineer with at least seven (7) years' relevant experience to work with a dedicated facilities group, deepen his/her technical skills, and help ensure that Uncommon provides well-maintained, comfortable, and safe educational facilities for our students and staff. Uncommon’s portfolio in New Jersey comprises buildings constructed from the very early 1900s through the early 2020s, operating HVAC systems dating from 1966 to the recent past few years. As ambient comfort is essential to a productive learning and teaching environment, the impact of this individual’s attentiveness will be felt and deeply appreciated across the region. Reporting to the Senior Manager, Facilities Management Team, the HVAC Operating Engineer will perform all technical work necessary to inspect, maintain, repair, and modify HVAC system in our buildings. With expertise in HVAC – and to a lesser extent in construction and plumbing – in multi-family, schools, and commercial buildings, the successful candidate will be responsible for conducting minor HVAC projects and managing larger ones and ensuring they are completed on time and within budget. The HVAC Operating Engineer will partner with senior Facilities team members and outside consultants on the planning, coordination, and supervision of mechanical construction and repair activities implemented by outside vendors, will ensure project timelines are met and ensure quality control standards are followed, mentor junior staff, and handle all HVAC-related communication with stakeholders. Uncommon values candidates who have the drive and ability to work hard, are highly self-motivated, are eager to take on and implement assignments and projects, and have a strong commitment to customer service and satisfaction. Safe, efficient, healthy, clean, comfortable, and reliable buildings are essential to Uncommon’s mission to deliver an excellent education to our students and a comfortable working environment to our dedicated staff. As a member of the NJ Facilities Team, the HVAC Operating Engineer will: • maintain current knowledge of the National Standard HVAC Code and other applicable building codes and perform all facets of the HVAC trade in accordance with those codes and in a safe and effective manner, • diagnose problems with HVAC systems, evaluate solutions to remedy issues, and provide sound recommendations to supervisors, • in emergency situations take immediate steps to contain the problem and restore the system to sound working condition, • in emergency situations maintain clear and consistent communication with stakeholders to apprise them of steps being taken to address the issue, • troubleshoot and repair all HVAC type systems currently available in the market, • maintain records of corrective and preventive work assignments received through an automated work order system (currently SchoolDude, soon ZenDesk), • assist onsite Facilities Managers and General Maintenance Workers with work projects or special assignments, • respond to campus emergency calls after hours as needed, • perform other duties as assignedQualifications Required Technical Skills: • Significant journeyman-level HVAC experience along with the trade knowledge to effectively understand and perform all facets of the HVAC trade in accordance with the National Standard Plumbing Code and other applicable codes, • Strong background in commercial heating projects large and small, including hot water boilers and gas furnaces, • Ability to read as-built plans for all buildings in portfolio, • Ability to read and interpret construction drawings, specifications, submittals, cut sheets, layouts, technical manuals, schematic drawings, and other HVAC-related trade documents, • Advanced knowledge of BMS systems and system operations, • Ability to procure replacement parts as needed to make all necessary repairs, • Ability to properly and safely use the tools of the trade and carry out all tasks expected of a Snr. HVAC Technician, • Ability to troubleshoot and repair refrigerant-driven cooling and heating equipment (heat pump systems), • Ability to troubleshoot and repair water-driven heating and cooling equipment, • Ability to troubleshoot and repair water or glycol pump systems, • Ability to troubleshoot and service chillers and cooling towers, • Ability to change filters and belts and clean coils as needed to ensure proper functioning of units, • Ability to troubleshoot and implement recommended repair/replacement of, • gas valves, • economizer motors and dampers, • compressors and contactors, • dampers, • chilled water and hot water pumps, • glycol injection units, • Ability to evacuate and top-off units with refrigerant General Technical Skills • Bachelor’s Degree equivalent or seven plus (7+) years of experience in the HVAC field, • Evidence of progressive responsibility and experience in HVAC field, with four plus (4+) years as head technician, • Ability to handle multiple projects simultaneously, • Familiarity with key building systems (HVAC, electrical, mechanical, plumbing), • Familiarity with OSHA and other Life Safety codes, etc., • Computer skills necessary to operate BMS system, • Facility with Microsoft office suite, • Strong organizational skills, attention to detail, and follow-through, • Ability to communicate effectively verbally and electronically with facilities staff, school staff, and vendors, • Available to work nights and weekends when necessary, • Extreme flexibility, with a strong work ethic and an entrepreneurial spirit to accommodate high level of responsibility and multiple priorities, • New Jersey low pressure black seal boiler, HVAC or other certificate, training, or licenses a plus, • Carry a current EPA card enabling technician to dispense of refrigerants, • Valid driver’s license and vehicle, • Strong capacity to operate independently Physical Requirements • The physical requirements outlined below are representative of those that must be met by an employee to successfully perform the essential functions of this position., • Stand or walk for up to two (2) hours at one time, up to eight (8) hours per day, • Sit for fewer than two (2) hours during an eight (8)-hour day, • Lift or carry up to 35 pounds frequently and 100 pounds occasionally, • Lift up to 100 pounds to waist height and up to 35 pounds in a range of motions from floor to overhead, • Frequently use hands for simple grasping, fine manipulation, pushing or pulling, • Occasionally climb stairs or ladders, dig, or pull with forces up to 100 pounds, • Frequently bend, squat, kneel, knee stand, lift overhead, reach overhead, push, or pull, • Work outdoors in a variety of temperatures and environmental conditions, • Possess ability to work at heights, full range of body motions and physical agility, and ability to maintain balance Mission Alignment • Demonstrate a relentless drive to improve the minds and lives of students in and out of school, • Demonstrate a commitment to the schools’ rules, regulations, and safety procedures, • Implement and enhance the school’s systems and culture Create high accountability for oneself as well as for building staff and vendors #ZR Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $43/hr to $50/hr. Starting pay is determined using various factors including but not limited to relevant professional experience, education, certifications, and tenure with Uncommon Schools. Benefits • Regional staff will have the same holidays and sustainability days as school-based staff in their region, and flexible summer PTO, • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.), • Mental health and counseling support + wellness benefits *A detailed list of all benefits is located HERE. At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email recruitment@uncommonschools.org.

Job Description Come rise above with Yona! Our employees are instrumental in maintaining a happy, healthy, and clean environment for the residents. We depend on our team members to be highly motivated, committed, and compassionate individuals who share our vision and work together to attain it. Our work environment encourages responsibility for personal growth and promotes pride in each employee. You will play an essential role in providing warm and friendly hospitality to all the residents, visitors, and coworkers. The District Manager manages and directs the overall operations of the housekeeping and laundry departments in numerous skilled nursing facilities in an assigned geographic area in accordance with current federal, state, and local standards, guidelines, and regulations. The District Manager is responsible for providing leadership to ensure the facilities are clean, sanitary, safe, secure, and adequately supplied so the highest degree of quality resident care can be maintained at all time. Benefits of Yona Comprehensive medical, dental, and vison insurance Employer paid life insurance 401(k) plan Competitive paid time off Employee assistance program Wages on demand Discount & wellness programs Career growth Responsibilities: Manages in compliance with company policies and procedures Visits each facility in the district on a regular basis to meet with managers and provide feedback on their performance to assist with their professional development Maintains contact with clients to ensure satisfaction with services being provided by Yona. Trains workers in housekeeping, laundry, and floor care procedures and proper operation and maintenance of equipment Supervises and evaluates the quality of work completed by the Environmental Services Directors and Supervisors. Maintains an environment that is in sanitary, attractive and in orderly condition at each facility in the district. Forecasts and plans the purchase of cleaning supplies, chemicals and equipment Reviews and analyzes all reports for the district Interviews, hires and orients Environmental Services Managers and Supervisors for facilities in the district Maintains proper staffing levels at each facility Maintains knowledge of any applicable Collective Bargaining Agreements (CBAs) in the district Attains financial goals for each facility in the district by managing a cost-effective program Maintains required records including but not limited to; inventory, compliance, income/expense, and personnel records Conducts regular management staff meetings and communicates with members of other departments to coordinate housekeeping activities Maintains the departments to be survey-ready at all times, assuring the department operates within federal, state, and local regulations Maintains excellent relations with residents, visitors, and all community departments Actively participates in facility meetings and committees Promotes the professional growth and development of the entire departmental team Conducts quality assurance rounds and inspections to ensure current quality controls and methodologies are suitable and sustainable Reports monthly initiatives, goals, and accomplishments Promotes and monitors resident satisfaction Performs the job assignments of a housekeeper, laundry worker or floor care technician as necessary Other job duties as assigned by the supervisor Requirements: Four year college degree and equal related experience strongly desired; high school diploma/GED required Two years’ experience in housekeeping services and multi-facility management in a healthcare environment is desired General business acumen Skilled in motivating and supervising staff members Excellent interpersonal skills, customer service and quality attitude Ability to work under pressure and meet established goals and objectives Public speaking skills Excellent stress management skills, administrative and organizational, and follow-through (with associates and clients) skills required Ability to interact positively with residents, client and other personnel and the public Ability to work all shifts as needed Proficient in the use of Windows based office software including but not limited to Microsoft Office, Word, Excel, PowerPoint and Outlook Must be able to work around cleaning chemicals Must be able to lift/carry a maximum of 50 pounds, push/pull a maximum of 50 pounds, stand, sit, bend and walk for extended periods of time This posting in no way states or implies that these are the only duties to be performed by the employee occupying this position. Candidates/employees may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. Certain job functions described herein may be subject to possible modification in accordance with applicable state and federal laws. Yona provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description CoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at www.coreweave.com. Not Sure Which Data Center Location You'd Like to Join? We're constantly opening new data centers and expanding our teams, so flexibility or uncertainty around location is completely okay. We're always excited to connect with people who are passionate about data center operations, hardware, and infrastructure. This interest form is for individuals who would like to be considered for future or upcoming Data Center Technician opportunities at CoreWeave. If you enjoy hands-on technical work, problem-solving, and being part of a fast-growing environment, we'd love to learn more about you. What You'll Do: Data Center Technicians at CoreWeave play a key role in ensuring the availability, reliability, and performance of our data center operations. Depending on team needs, responsibilities may include: • Supporting day-to-day data center operations to meet defined service levels, • Performing hardware and network diagnostics, troubleshooting, and physical repairs, • Participating in root cause analysis for hardware and software issues, • Assembling, installing, and maintaining equipment, • Maintaining inventory and test/tool equipment, • Developing or contributing to documentation and internal training, • Providing technical support to data center teams, • Writing or using scripts to update server and networking hardware, • Participating in an on-call rotation and providing after-hours support as needed, • Occasional travel to other data center locations This is a salaried, fully onsite role at one of our data center locations. About the role: You don't need to check every box to express interest. Many successful candidates bring a mix of hands-on experience, education, and curiosity to learn. • Computer Hardware experience (troubleshooting, assembling), • Linux Operating System experience, • All physical requirements are expected with reasonable accommodations, • Candidates should be able to lift up to 50 lbs and/or work in elevated locations, • Ability to work in an environment that operates 24/7 with an ability to participate in on-call rotation and provide after-hours support as needed, • Excellent time management, organizational, and communication skills, • Must be able to prioritize tasks and react quickly to issuesWho You Are: Hands-on OR education-based experience with any of the following areas: • Computer Hardware, including troubleshooting and repair skills experience, • Data Center experience, • Computer Networking experience, • Python, Bash, or other scripting languages experience, • Experience with Cisco IOS and/or Juniper JunOS, • An Associate's Degree or equivalent experience in an IT-related fieldWhy CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences, • Achieve More Together We support and encourage an entrepreneurial outlook and independent thinking. We foster an environment that encourages collaboration and enables the development of innovative solutions to complex problems. As we get set for takeoff, the organization's growth opportunities are constantly expanding. You will be surrounded by some of the best talent in the industry, who will want to learn from you, too. Come join us! The base salary range for this role is $65,000 to $85,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs. The benefits below reflect our US-based offerings for full-time employees; for roles in other locations, benefits vary and are shared during the hiring process. These include: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment, • A work culture focused on innovative disruption California Applicants California Consumer Privacy Act Equal Opportunity & Accommodations CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: careers@coreweave.com. Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description RVE an Ardurra company is seeking a water/wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 8 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input after the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail Education and Experience Requirements: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • Work Zone Safety The employee may also be required to accrue and/ or renew the following certifications at the discretion of the Department Head after the date of hire • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training Compensation is based on experience, qualifications, and other job-related factors. The expected hourly rate for this position is $30 to $45 The firm also offers a comprehensive benefits package, including medical, dental, and vision insurance, paid time off, paid holidays, and a 401(k) retirement savings plan. Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-KS2 Documents. The role also involves reviewing plans, monitoring construction progress, promoting observance of building codes, and serving as a liaison among contractors, project managers, regulatory agencies, and the community. The Inspector supports project documentation, reporting, and issu

Job Description Join Our Growing Ophthalmology Team as an Ophthalmic Technician! Our established multi-specialty Ophthalmology group is seeking a skilled professional to join our friendly and dedicated team. If you're passionate about providing exceptional patient care and eager to grow in a supportive environment, we want to hear from you! Your Impact: • Elevate patient care: Work closely with our ophthalmologists to gather comprehensive patient information, ensuring accurate diagnoses and personalized treatment plans., • Master ophthalmic testing: Conduct thorough preliminary examinations, including visual acuity, pupillary responses, and more., • Perform advanced diagnostics: Administer a range of diagnostic tests, such as OCT, perimetry, and ophthalmic photography., • Assist in surgical procedures: Support ophthalmologists during minor surgeries, laser procedures, and crosslinking., • Streamline patient flow: Efficiently manage patient flow in clinic and imaging rooms, collaborating with clinical staff., • Administer eye drops: (Certification Required), • Contribute to clinic efficiency: Perform clinical and administrative tasks, ensuring a smooth and organized workflow. What You'll Bring/Requirements: • A passion for patient care and a commitment to excellence., • Exceptional attention to detail and strong organizational skills., • Excellent communication and interpersonal abilities., • Ability to thrive in a fast-paced, team-oriented environment., • Proven experience as an Ophthalmic Technician., • Knowledge of medical office procedures., • Ability to perform indirect activities, administrative tasks and any other assigned duties that contribute to the efficient & high-quality performance of the medical practice., • High School Diploma or equivalent. Bonus Points: • Certified Ophthalmic Assistant (COA) Certification. Key Skills: • Reliability and a strong work ethic., • Ability to work collaboratively with a diverse team., • Proficiency in data entry and typing., • Outstanding customer service skills. We Care: We prioritize patients, colleagues, and families with compassionate, leading care and treat all with dignity and respect. We Collaborate: We work together with patients, seeking diverse input to share and grow innovative ideas. We Elevate: Committed to excellence, we exceed expectations by delivering leading eye care research, innovation, education, and outreach. Refocus is an equal opportunity employer and we value diversity.

Job Description About Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. We are reinventing the stellarator using computer-controlled arrays of planar coils to replace the complex magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. We foster an innovative, collaborative, and resilient environment where every team member plays a critical role in our success. Position Overview: Thea Energy is seeking a highly skilled and self-motivated Senior Test Technician to join our rapidly growing team. In this role, you will be a cornerstone of our hardware validation strategy, serving as the hands-on bridge between test plans and real-world execution. Working with a high degree of autonomy, you will build, assemble, operate, and troubleshoot custom high-current, high-vacuum, and cryogenic test stands to validate our superconducting magnets and other critical fusion hardware. You will work closely with engineering and manufacturing teams to ensure rigorous data collection, safety compliance, and continuous process improvement in a fast-paced environment. Key Responsibility Areas: • Assemble, wire, plumb, and commission complex test articles, high-power test stands, cryogenic loops, and high-vacuum test equipment. • Operate multi-day test systems and perform real-time, hands-on troubleshooting of mechanical, electrical, cryogenic, thermal, and vacuum system failure modes alongside test engineers., • Support rapid development of new procedures, measurement methods, and custom tooling for novel tests and enabling exceptional quality and data integrity., • Partner closely with test, magnet, manufacturing, electrical, and mechanical engineering teams to align test scope and requirements, as well as guarantee successful tests and results., • Enforce rigorous safety protocols in high-current, high-field, and cryogenic environments. Maintain tool and workspace organization (5S) and ensure precision test equipment is calibrated and maintained., • Guide and mentor technicians and engineers in shop best practices, schematic reading, and safe testing procedures. Required Qualifications & Experience: • High school diploma or equivalent (Associate degree in a technical discipline preferred)., • 5+ years of hands-on technical experience in shop fabrication, system assembly, hardware testing, or high-tech manufacturing environments (e.g., fusion, aerospace, superconducting magnets, or heavy industry)., • Demonstrated experience building, operating, and troubleshooting at least two of the following: o Testing of superconducting magnet or nuclear fusion systems o High vacuum or ultra-high pressure systems o Cryogenic or fluid handling systems o High-power electrical, control systems, or industrial wiring o Electromechanical, automated, or PLC-driven equipment • Proficiency in reading and interpreting mechanical drawings, schematics, and wiring diagrams., • Skill with hand tools, power tools, precision measuring instruments, and basic shop machining equipment (e.g., saws, manual mills)., • Familiarity with software tools for basic documentation, logging, or reporting (e.g., Microsoft Office)., • Ability to safely lift up to 50 lbs and work comfortably around high-voltage, high-field, and cryogenic environments. Ideal Experience & Skillsets:, • Experience executing automated test routines utilizing LabVIEW, Python interfaces, or PLCs/HMIs., • Familiarity with reflow soldering, PCBA manufacturing/repair, or micro-soldering., • Experience with creating or improving test procedures quality control standards, and non-conformance reporting., • Rigging, overhead crane, and forklift operation certifications or experience., • Strong communication skills with an ability to work independently under tight deadlines. Company Benefits: • Base Pay: $32.00 – $55.00+ per hour (Non-Exempt / OT Eligible) • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Who we are at Osmo: Osmo is a digital olfaction company, on a mission to give computers a sense of smell to improve the health and wellbeing of human life. Why? Our sense of smell both enriches and saves lives, and has a deep and direct connection to our emotions and memory. Olfactory Intelligence has applications across industries including fragrance, manufacturing, security, medicine, and more. We believe in the power of automation and thoughtfully applied AI/ML to solve problems beyond the reach of human intuition alone. We're headquartered in Elizabeth, NJ, with an additional office in Somerville, MA. We provide complimentary shuttle service from Brooklyn and Newark, NJ. About the Role Osmo's QC function is being built from the ground up, and this seat is where day-to-day quality judgment lives. You'll run testing and sampling on raw materials coming in and finished fragrance going out, using real fragrance-industry judgment that automated testing alone can't provide. You'll have the standing to make real-time accept/reject calls independently, and the experience to step in and cover QC decisions when the QC Manager is out. What You'll Do: Judge incoming raw material results from automated testing, deciding when an out-of-spec reading is a real defect versus normal variation in a natural material Apply trained olfactive judgment to evaluate raw materials and finished goods using sensory skill the equipment can't replicate Run triangulation testing on outgoing product to confirm it matches prior batches before it reaches a customer Make accept/reject calls in real time, multiple times a day, escalating only genuinely ambiguous cases to the QC Manager Step in and cover QC sign-off when the QC Manager is unavailable, keeping finished-goods flow moving rather than stalling Maintain and run lab instrumentation (GC/MS, photosampler, flash point testing, colorimeters), including calibration checks and upkeep Maintain audit-ready lab records: test logs, certificates of analysis, and equipment records Mentor QC Tech staff on fragrance-specific testing and olfactive judgment Partner across the floor with Purchasing, Warehouse, Shipping/Receiving, and Fragrance Development on sample flow and testing turnaround Who You Are: Fragrance industry experience or exposure required — adjacent industries (coffee, beer, wine, alcohol roasting, flavor, cosmetics, specialty chemicals) don't clear the bar Comfortable making high-frequency accept/reject calls independently, without over-escalating routine judgment Trained nose — sensory and olfactive evaluation skill specific to fragrance raw materials and finished goods Strong hands-on experience with lab instrumentation; GC/GCMS familiarity is a plus, not a requirement Strong documentation habits Comfortable stepping into a QC decision-making role in the Manager's absence Technical degree preferred (Chemistry, Chemical Engineering, or related); equivalent hands-on fragrance-industry lab experience accepted in place of a degree On-site in Elizabeth, NJ, 5 days a week What We Offer: Real Growth Path — A senior technician track with real, independent QC decision-making authority, inside a quality function being built from the ground up Catered Lunch — Mon/Wed/Fri; Newark, NJ and Brooklyn shuttles 401(k) savings plan and employer match Competitive salary and meaningful equity in a high-growth company Flexible PTO and paid family leave Commuter benefits (pre-tax transit and parking) If this role inspires you we’d encourage you to apply. We are committed to recruiting, developing, and retaining an incredible team optimized for a diversity of thought, background, and approaches. For all Full-Time Employees, compensation is just one component of Osmo’s total rewards approach, which is designed to support the well-being, growth, and long-term success of our team members. Depending on the role, this may include base salary or contract-based pay, along with access to health, dental, and vision coverage; a 401(k) retirement savings plan with company match; flexible paid time off and company holidays; and equity or incentive compensation for eligible roles. Actual compensation will vary based on factors such as experience, skills, location, internal equity, and other relevant business considerations. Osmo regularly reviews pay ranges and compensation structures to ensure they remain competitive, equitable, and aligned with current market data. All employment decisions and responsibilities are determined based on current ability and your ability to grow, without regard to race, color, gender identity, sex, sexual orientation, religion, age, marital status, physical, mental, or sensory disability, or any other characteristic protected by applicable law. Recruitment & Staffing Agencies: Osmo does not accept unsolicited resumes from any source other than candidates. The submission of unsolicited resumes by recruitment or staffing agencies to Osmo or its employees is strictly prohibited unless contacted directly by the Osmo Talent Acquisition team. Any resume submitted by an agency in the absence of a signed agreement will automatically become the property of Osmo and Osmo will not owe any referral or other fees with respect thereto. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire Compensation Range: $80K - $100K

Job Description This position is being recruited in support of a pending Essex County paratransit contract opportunity. Employment is contingent upon First Student being awarded the contract. Candidates may be contacted and interviewed prior to the contract award; however, an employment start date will not be confirmed until the award and implementation timeline are finalized. Assistant General Manager / Operations ManagerWhy First Student? At First Student, our operations leaders are responsible for delivering safe, reliable, and efficient transportation service while supporting employees and maintaining strong customer relationships. The Assistant General Manager/Operations Manager will help lead the Essex County Paratransit operation, supporting a 47-vehicle community transportation program and assisting with the day-to-day management of employees, service delivery, dispatch, scheduling, fleet operations, customer service, and regulatory compliance. About the Role The Assistant General Manager/Operations Manager supports the overall management of the Essex County Paratransit operation and works closely with the General Manager and other local leaders to ensure transportation services are delivered safely, efficiently, and in accordance with contractual and regulatory requirements. This position provides hands-on operational leadership across multiple areas of the business, including employee supervision, dispatching, scheduling, fleet coordination, customer service, and personnel management. The successful candidate will bring significant supervisory or management experience in paratransit, community transportation, public transportation, logistics, fleet management, or a closely related transportation environment. What You'll Do • Support the day-to-day management of the Essex County Paratransit operation., • Assist with oversight of transportation service delivery, including dispatching, scheduling, routing, and daily operations., • Supervise employees and provide day-to-day direction, coaching, and performance management., • Support driver, dispatcher, customer service, and operational staff., • Monitor service performance and help address operational issues as they arise., • Coordinate with maintenance and fleet teams to support vehicle availability and service reliability., • Help manage fleet operations and ensure vehicles are appropriately assigned and available for service., • Support customer service activities and assist with the resolution of passenger or client concerns., • Monitor regulatory and company compliance requirements., • Assist with employee scheduling, staffing, attendance, and other personnel-management responsibilities., • Support safety initiatives and operational compliance programs., • Assist with service disruptions, emergencies, and other operational events., • Review operational data and performance trends and help develop corrective actions or process improvements., • Work closely with the General Manager and other leadership to maintain strong operational performance., • Help promote employee engagement, accountability, teamwork, and a positive work environment., • Perform additional operational and management responsibilities as required.What You'll Bring, • Minimum of five years of progressively responsible supervisory or management experience in one or more of the following: Community transportation Paratransit Demand-response transportation Public transportation Logistics Fleet management a closely related transportation field, • Demonstrated experience with: Transportation operations Employee supervision Customer service Scheduling Dispatching Fleet operations Regulatory compliance Personnel management, • Strong leadership and employee-management skills., • Ability to manage multiple operational priorities in a fast-paced environment., • Strong written and verbal communication skills., • Strong problem-solving and decision-making ability., • Ability to work effectively with drivers, dispatchers, customers, management, vendors, and community partners., • Strong organizational and time-management skills., • Ability to support operational improvements and maintain consistent service performance.Work Environment, • Position is full-time and on-site., • Role will involve work in office, dispatch, vehicle, and transportation operating environments., • Must be able to respond to operational issues and changing service needs throughout the workday., • Additional availability may be required based on operational needs, emergencies, or service disruptions.Why Join Our Team? This role provides the opportunity to help lead a major paratransit operation while directly influencing employee performance, customer service, operational efficiency, and service reliability. If you have significant transportation management experience and enjoy leading fast-paced operations, we encourage you to apply and join First Student. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description Who we are at Osmo: Osmo is a digital olfaction company, on a mission to give computers a sense of smell to improve the health and wellbeing of human life. Why? Our sense of smell both enriches and saves lives, and has a deep and direct connection to our emotions and memory. Olfactory Intelligence has applications across industries including fragrance, manufacturing, security, medicine, and more. We believe in the power of automation and thoughtfully applied AI/ML to solve problems beyond the reach of human intuition alone. We're headquartered in Elizabeth, NJ, with an additional office in Somerville, MA. We provide complimentary shuttle service from Brooklyn and Newark, NJ. About the Role Osmo's QC function is being built from the ground up, and this seat is where day-to-day quality judgment lives. You'll run testing and sampling on raw materials coming in and finished fragrance going out, using real fragrance-industry judgment that automated testing alone can't provide. You'll have the standing to make real-time accept/reject calls independently, and the experience to step in and cover QC decisions when the QC Manager is out. What You'll Do: Judge incoming raw material results from automated testing, deciding when an out-of-spec reading is a real defect versus normal variation in a natural material Apply trained olfactive judgment to evaluate raw materials and finished goods using sensory skill the equipment can't replicate Run triangulation testing on outgoing product to confirm it matches prior batches before it reaches a customer Make accept/reject calls in real time, multiple times a day, escalating only genuinely ambiguous cases to the QC Manager Step in and cover QC sign-off when the QC Manager is unavailable, keeping finished-goods flow moving rather than stalling Maintain and run lab instrumentation (GC/MS, photosampler, flash point testing, colorimeters), including calibration checks and upkeep Maintain audit-ready lab records: test logs, certificates of analysis, and equipment records Mentor QC Tech staff on fragrance-specific testing and olfactive judgment Partner across the floor with Purchasing, Warehouse, Shipping/Receiving, and Fragrance Development on sample flow and testing turnaround Who You Are: Fragrance industry experience or exposure required — adjacent industries (coffee, beer, wine, alcohol roasting, flavor, cosmetics, specialty chemicals) don't clear the bar Comfortable making high-frequency accept/reject calls independently, without over-escalating routine judgment Trained nose — sensory and olfactive evaluation skill specific to fragrance raw materials and finished goods Strong hands-on experience with lab instrumentation; GC/GCMS familiarity is a plus, not a requirement Strong documentation habits Comfortable stepping into a QC decision-making role in the Manager's absence Technical degree preferred (Chemistry, Chemical Engineering, or related); equivalent hands-on fragrance-industry lab experience accepted in place of a degree On-site in Elizabeth, NJ, 5 days a week What We Offer: Real Growth Path — A senior technician track with real, independent QC decision-making authority, inside a quality function being built from the ground up Catered Lunch — Mon/Wed/Fri; Newark, NJ and Brooklyn shuttles 401(k) savings plan and employer match Competitive salary and meaningful equity in a high-growth company Flexible PTO and paid family leave Commuter benefits (pre-tax transit and parking) If this role inspires you we’d encourage you to apply. We are committed to recruiting, developing, and retaining an incredible team optimized for a diversity of thought, background, and approaches. For all Full-Time Employees, compensation is just one component of Osmo’s total rewards approach, which is designed to support the well-being, growth, and long-term success of our team members. Depending on the role, this may include base salary or contract-based pay, along with access to health, dental, and vision coverage; a 401(k) retirement savings plan with company match; flexible paid time off and company holidays; and equity or incentive compensation for eligible roles. Actual compensation will vary based on factors such as experience, skills, location, internal equity, and other relevant business considerations. Osmo regularly reviews pay ranges and compensation structures to ensure they remain competitive, equitable, and aligned with current market data. All employment decisions and responsibilities are determined based on current ability and your ability to grow, without regard to race, color, gender identity, sex, sexual orientation, religion, age, marital status, physical, mental, or sensory disability, or any other characteristic protected by applicable law. Recruitment & Staffing Agencies: Osmo does not accept unsolicited resumes from any source other than candidates. The submission of unsolicited resumes by recruitment or staffing agencies to Osmo or its employees is strictly prohibited unless contacted directly by the Osmo Talent Acquisition team. Any resume submitted by an agency in the absence of a signed agreement will automatically become the property of Osmo and Osmo will not owe any referral or other fees with respect thereto. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire Compensation Range: $80K - $100K

Job DescriptionJob Title: Research and Development Engineering ManagerJob Description We are seeking an experienced Research and Development (R&D) Engineering Manager to lead new product development in a hands-on engineering and manufacturing environment. In this role, you will drive the design and development of new mechanical products and larger-scale industrial equipment, taking concepts from initial idea through testing, troubleshooting, and full production rollout. This position offers the opportunity to make an immediate impact within a growing organization by owning new product designs, collaborating closely with technicians and production personnel, and helping to achieve the goal of releasing approximately one new unit or design per year. Responsibilities • Lead and support the research and development of new mechanical products and industrial equipment from concept through production., • Develop new product designs and guide them through the full lifecycle, including design, build, testing, troubleshooting, and transition to manufacturing., • Oversee and actively participate in product testing to validate performance, safety, and reliability before production release., • Identify and resolve engineering issues during testing and after products reach the manufacturing floor, driving continuous design improvements., • Work closely with the R&D technician and engineering team during the development and build of new units, ensuring technical accuracy and manufacturability., • Support new products as they transition onto the production floor, providing engineering guidance and resolving production-related challenges., • Collaborate cross-functionally with engineering, production, welders, material handlers, and other manufacturing personnel to address issues and optimize new product introduction., • Help ensure manufacturing teams are fully prepared and trained to successfully build newly developed products, including communicating design intent and key assembly details., • Drive new product development efforts in alignment with the companys goal of developing approximately one new unit or design per year., • Provide hands-on engineering leadership while remaining closely connected to the product, shop, and production environment., • Own products from design through production, including involvement in prototype builds, testing, troubleshooting, and production rollout., • Offer manufacturing support by monitoring early production runs, gathering feedback from the shop floor, and implementing design or process improvements as needed., • Demonstrate engineering leadership by taking ownership of R&D projects, guiding technical work, and setting direction for new product initiatives., • Stay engaged with the equipment and manufacturing environment, balancing leadership responsibilities with direct, hands-on engineering involvement.Essential Skills, • 57+ years of engineering experience, with a strong background in mechanical or industrial equipment., • Approximately 23 years of R&D or new product development experience, focusing on designing and developing new products rather than solely supporting existing ones., • Proven experience taking products through the full lifecycle: design, build, testing, troubleshooting, and production., • Experience working with larger-scale mechanical, industrial, or capital equipment rather than only small devices or components., • Ability to hit the ground running without requiring extensive training in this type of engineering environment., • Comfort working in a hands-on engineering and manufacturing setting, staying close to the equipment and production processes., • Demonstrated capability in mechanical design engineering, including creating and refining designs for new products., • Strong troubleshooting skills to identify, analyze, and resolve engineering issues during testing and manufacturing., • Experience supporting designs as they transition onto the production floor, including manufacturing support and production engineering exposure., • Comfort collaborating directly with production personnel, welders, material handlers, R&D technicians, and other shop-floor staff in a direct, warehouse-style environment., • Ability to provide engineering leadership, take ownership of R&D projects, and guide technical work, even without a specified minimum number of management years.Additional Skills & Qualifications, • background in industrial automation, with experience working on automated mechanical equipment or systems., • Experience designing or developing material-handling equipment, such as conveyors or related systems., • Package-handling industry experience, particularly with equipment used for moving, sorting, or processing packages., • Exposure to conveyor systems; direct conveyor experience is beneficial but not required., • Capital equipment experience, particularly with larger-scale mechanical or industrial systems., • Production engineering experience, providing insight into manufacturability and production processes for new products., • CAD experience, with the ability to work with computer-aided design tools to create and modify product designs (specific software not required)., • Experience with product testing, including developing test plans and evaluating performance of newly designed products before production., • Prototype development experience, including building and evaluating prototypes as part of the R&D and testing process., • Demonstrated cross-functional collaboration skills, comfortable working with engineering, technicians, welders, material handlers, and production personnel., • Hands-on engineering mindset, preferring to stay engaged with equipment and the manufacturing environment rather than purely managing from an office., • Prior experience in engineering leadership or ownership of technical work, particularly in R&D or new product development settings.Work Environment The work environment is very hands-on and non-corporate, with a strong warehouse and shop-floor feel. You will spend significant time in and around the production area, working closely with the engineering team, R&D technician, welders, material handlers, and other manufacturing personnel rather than being separated from the operation. The culture is laid-back and joking at times, with a direct communication style, but shifts into focused "crunch time" when projects need to move forward and deadlines approach. Team members on the shop floor can be straightforward and blunt, so this role suits someone who is comfortable working with diverse personalities in a practical, results-driven environment. The organization is growing, offering opportunities to make an immediate impact, take ownership of new product initiatives, and contribute directly to the development and successful manufacturing of new equipment designs. Job Type & Location This is a Contract position based out of Union, NJ. Pay and Benefits The pay range for this position is $60.00 - $62.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract position based out of Union, NJ. Application Deadline This position is anticipated to close on Oct 26, 2026. Workplace Type This is a fully onsite position in Union,NJ. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description Who we are at Osmo: Osmo is a digital olfaction company, on a mission to give computers a sense of smell to improve the health and wellbeing of human life. Why? Our sense of smell both enriches and saves lives, and has a deep and direct connection to our emotions and memory. Olfactory Intelligence has applications across industries including fragrance, manufacturing, security, medicine, and more. We believe in the power of automation and thoughtfully applied AI/ML to solve problems beyond the reach of human intuition alone. We're headquartered in Elizabeth, NJ, with an additional office in Somerville, MA. We provide complimentary shuttle service from Brooklyn and Newark, NJ. About the Role Osmo's QC function is being built from the ground up, and this seat is where day-to-day quality judgment lives. You'll run testing and sampling on raw materials coming in and finished fragrance going out, using real fragrance-industry judgment that automated testing alone can't provide. You'll have the standing to make real-time accept/reject calls independently, and the experience to step in and cover QC decisions when the QC Manager is out. What You'll Do: Judge incoming raw material results from automated testing, deciding when an out-of-spec reading is a real defect versus normal variation in a natural material Apply trained olfactive judgment to evaluate raw materials and finished goods using sensory skill the equipment can't replicate Run triangulation testing on outgoing product to confirm it matches prior batches before it reaches a customer Make accept/reject calls in real time, multiple times a day, escalating only genuinely ambiguous cases to the QC Manager Step in and cover QC sign-off when the QC Manager is unavailable, keeping finished-goods flow moving rather than stalling Maintain and run lab instrumentation (GC/MS, photosampler, flash point testing, colorimeters), including calibration checks and upkeep Maintain audit-ready lab records: test logs, certificates of analysis, and equipment records Mentor QC Tech staff on fragrance-specific testing and olfactive judgment Partner across the floor with Purchasing, Warehouse, Shipping/Receiving, and Fragrance Development on sample flow and testing turnaround Who You Are: Fragrance industry experience or exposure required — adjacent industries (coffee, beer, wine, alcohol roasting, flavor, cosmetics, specialty chemicals) don't clear the bar Comfortable making high-frequency accept/reject calls independently, without over-escalating routine judgment Trained nose — sensory and olfactive evaluation skill specific to fragrance raw materials and finished goods Strong hands-on experience with lab instrumentation; GC/GCMS familiarity is a plus, not a requirement Strong documentation habits Comfortable stepping into a QC decision-making role in the Manager's absence Technical degree preferred (Chemistry, Chemical Engineering, or related); equivalent hands-on fragrance-industry lab experience accepted in place of a degree On-site in Elizabeth, NJ, 5 days a week What We Offer: Real Growth Path — A senior technician track with real, independent QC decision-making authority, inside a quality function being built from the ground up Catered Lunch — Mon/Wed/Fri; Newark, NJ and Brooklyn shuttles 401(k) savings plan and employer match Competitive salary and meaningful equity in a high-growth company Flexible PTO and paid family leave Commuter benefits (pre-tax transit and parking) If this role inspires you we’d encourage you to apply. We are committed to recruiting, developing, and retaining an incredible team optimized for a diversity of thought, background, and approaches. For all Full-Time Employees, compensation is just one component of Osmo’s total rewards approach, which is designed to support the well-being, growth, and long-term success of our team members. Depending on the role, this may include base salary or contract-based pay, along with access to health, dental, and vision coverage; a 401(k) retirement savings plan with company match; flexible paid time off and company holidays; and equity or incentive compensation for eligible roles. Actual compensation will vary based on factors such as experience, skills, location, internal equity, and other relevant business considerations. Osmo regularly reviews pay ranges and compensation structures to ensure they remain competitive, equitable, and aligned with current market data. All employment decisions and responsibilities are determined based on current ability and your ability to grow, without regard to race, color, gender identity, sex, sexual orientation, religion, age, marital status, physical, mental, or sensory disability, or any other characteristic protected by applicable law. Recruitment & Staffing Agencies: Osmo does not accept unsolicited resumes from any source other than candidates. The submission of unsolicited resumes by recruitment or staffing agencies to Osmo or its employees is strictly prohibited unless contacted directly by the Osmo Talent Acquisition team. Any resume submitted by an agency in the absence of a signed agreement will automatically become the property of Osmo and Osmo will not owe any referral or other fees with respect thereto. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire Compensation Range: $80K - $100K

Job Description Hudson Regional Hospital, nestled in Secaucus, New Jersey, is a distinguished healthcare institution committed to building a healthier community through exceptional care, advanced technology, and knowledgeable physicians. We take pride in being the #1 choice for surgery, boasting the Institute for Robotic Surgery, equipped with the latest surgical robots and six SRC Center of Excellence designations. This places us at the forefront of robotic and minimally invasive surgery, with the unique distinction of being the world's first hospital to receive the SRC Center of Excellence designation in Robotic Spine Surgery. If you're ready to meet this challenge and practice at the pinnacle of your license, we invite you to submit your application through our website at Hudson Regional Hospital Careers. Be sure to review the specific requirements outlined there. Join us in shaping the future of healthcare at Hudson Regional Hospital. The Registered Daytime Polysomnographic Technologist, of the Institute for the sleep Center, conduct daytime diagnostic evaluations, score sleep data, and manage patient equipment and education. under the direction of the Director. (Responsibilities) • Conducting Daytime Studies: Administer specialized daytime tests like the Multiple Sleep Latency Test (MSLT) for narcolepsy or the Maintenance of Wakefulness Test (MWT)., • Scoring and Analysis: Review, analyze, and score complex physiological data and sleep stages from overnight or daytime recordings., • Physician Reporting: Prepare detailed technical reports and summaries for sleep physicians to interpret and finalize patient diagnoses., • Performs mask fits and CPAP trials (PAP naps) on patients., • Equipment Management: Set up, calibrate, and troubleshoot polysomnography equipment, sensors, and CPAP (Continuous Positive Airway Pressure) therapy devices., • Patient Education., • Cleans all equipment as indicated by Infection Control., • Performs inventory on a monthly basis., • Collects data for the monthly Performance Improvement reports., • Responsible for identifying equipment malfunctions and scheduling proper repair or replacement., • Maintains a neat and clean work environment; cleans all surfaces at the end of their shift., • Participates in Journal Club and all staff meetings., • Maintains patient charts in proper order; and files in appropriate file., • Participates in Health fairs., • Performs monthly check on Code Cart., • Assists with the entire Direct Referral process., • Assists with the set-up of durable medical equipment on patients., • Completes back-ups and typing for interpretation process., • Completes mandatory HRH annual e-Learning., • Performs other related tasks as requested by Manager/Administration to maintain department operations., • Other duties and/or projects as assigned., • Adheres to HRH Organizational competencies and standards of behavior. Education, Knowledge, Skills and Abilities Required: · High School diploma or general equivalency diploma (GED). · Successful completion of an accredited educational program leading to a certificate or associate degree with an emphasis in sleep technology -or- Successful completion of a sleep technology program associated with a state licensed and/or a nationally accredited educational facility or equivalent experience and documented proficiency for all competencies required of a sleep technician. · Excellent written and verbal communication skills. · Medical terminology. · Proficient computer skills that may include but are not limited to Microsoft Office and/or Google Suite platforms. Minimum Experience: · At least two years of Polysomnographic Technologist experience. Licenses and Certifications Required: · Certification by a nationally recognized certification board and holds either the Registered Polysomnographic Technologist (RPSGT-preferred), Registered Sleep Technologist (RST), or Sleep Disorders Specialist (SDS) credential. · BLS certification. · RPSGT, NJ State Polysomnographic Technologist license. Benefits: · Competitive salary · Dental insurance

Job Description Company Overview Haddad Plumbing and Heating Inc. has Been in Business for 25 Years Servicing New Jersey, New York City, and Westchester County in Mid-Rise and High-Rise buildings with Exceptional Work and a Proven Track Record. This is a Terrific Opportunity for a Well Organized and Outgoing Individual to have a Great Career in a Great Industry. Summary The Service Manager is responsible for managing the day-to-day sales, budget, operations and customer service experience for the company’s technician team. Essential Functions • Achieve service department sales and profitability goals., • Respond to operational, employee, and customer issues promptly and efficiently., • Review and process all invoices accurately and timely., • Develop and manage service inventory policies, levels, and pricing to meet company goals for vehicles and warehouses., • Manage seasonal fluctuations by promoting and scheduling routine maintenance., • Propose, maintain, and administer the service technician commission plan., • Conduct periodic ride-alongs to ensure adherence to procedures and techniques and maximize customer service., • Lead and coach team members, providing necessary training, knowledge, and information for peak performance, continuous improvement, and a positive work environment aligned with company objectives., • Coordinate tactical and technical training for technician and employee development., • Adjust manpower allocation daily based on customer demand and the approved schedule., • Address customer complaints and satisfaction issues promptly., • Inspect trucks and enforce dress code compliance., • Visit job sites to gather information for proposal preparation according to company guidelines., • Perform other duties as assigned by upper management.Qualifications:, • Bachelor's degree or a high school diploma with 10+ years of experience., • 5+ years of experience in the HVAC/Plumbing industry., • 3+ years of management experience., • Proficiency in Microsoft Office., • Strong verbal and written communication skills., • Valid driver's license with a clean driving record (must provide current abstract). Powered by JazzHR 1ir116NLMc

Job Description The Company is seeking someone with strong people management skills and a positive outlook looking for a challenging career with a fast-growing company in the specialty pharmacy management services. The Senior Manager of Patient Services is a key front-line manager supporting the Shields Health Solutions specialty pharmacy and medication adherence model. The manager provides day-to-day management for a team of pharmacy liaisons located in specialty clinics within hospital settings. In addition, the Senior Manager of Patient Services will provide guidance and mentoring to other Managers of Patient Services. This role is responsible for ensuring the adoption and continuity of best practices, achieving clinic and site level metrics, building relationships with health system stakeholders, providing ongoing support to the team, coordinating coverage, coaching, performance management and professional development of the Specialty Pharmacy Liaisons and Managers of Patient Services. In some cases, a Senior Manager of Patient Services will support other Managers at their hospital partner, and in other cases they may support Managers located at other sites. This applicant should be results-oriented with a positive outlook, and a clear focus on high quality. A natural forward planner who critically assesses their own performance and the performance of others. Problem-solving skills and a continuous improvement mindset are important in this role. The ideal candidate should have front-line employee management experience with a background in pharmacy or healthcare. Applicant should be service-oriented, and results driven with a positive outlook and a clear focus on performance accountability and employee development. The applicant must be able to develop strong and trusting relationships and inspire and motivate a team. Key Responsibilities: • Leads assigned Specialty Liaison team, managing and directing activities essential to providing the highest quality experience for patients in specialty clinics, • Mentors and coaches assigned Manager of Patient Services team serving as first point of contact for inquires and problem solving, • Partners with Regional Leadership on growth initiatives for clinic and health system expansion, • Coach and develop liaison team and instill Shields culture at health system partner site, • Demonstrate a strong track record of maintaining and growing the specialty pharmacy's patient population. Project manage regional resources (national liaisons, operations associates, etc.) to execute improvement and growth efforts, • Ensures Specialty Liaison team accountability and the consistent use of best practices for execution of the following critical responsibilities: prior authorizations, patient financial assistance, medication refills, patient appointments, and patient outreach, • Provides consistent, timely and ongoing performance coaching, feedback, training, and development to liaisons, • Ensures coverage for Specialty Liaisons when absent from work, • Establishes credible, professional relationships within health system clinics with physicians, clinicians, and administrative support personnel, • Ensure a high level of partner satisfaction by proactively communicating the value of Shields' clinic operations team, addressing concerns responsively, and providing regular updates to clinic leadership, • Demonstrates an understanding of site financials and manages to site financial and operational metrics, • Meet or exceed site operational targets surrounding clinic service, growth, and patient satisfaction & outcomes, • Provide performance updates to Shields leadership team, • Effective problem-solver who works through barriers for success within clinics and with the support staff, • Collaboratively partners with the data analytics team and Patient Support Center to execute on identified opportunities, • Identifies, assesses, and contributes to continuous process improvement and optimization initiatives, • Collaborate with regional leadership teams to implement strategic growth initiatives including new clinic launches, workflow changes, and other growth initiatives, • Other duties as assigned Experience/ Education: • Required Licensure/Certification: A National Certification as a CPhT and prior experience as a licensed pharmacy technician would be optimal in this role. Experience in a pharmacy or healthcare setting is required, • Bachelor's degree preferred with a minimum of 2 years supervisory/management experience or equivalent with Shields Health Solutions and 5+ years working in a healthcare or pharmacy environment with direct patient and clinician contact., • Experience working within a retail, hospital or provider type setting communicating with physicians, nurses, and other healthcare professionals (preferably in an outpatient or medical clinic setting) is a plus., • Strong communication skills, highly proficient in Microsoft Office particularly Excel and Word, • This candidate will be able to quickly learn other programs and extract relevant information, • Possess strong organizational skills is a must, • Understand relevant company and site-specific metrics that drive patient and provider satisfaction and engagement in the SHS care model, • Ability to manage the performance of individuals against quantitative metrics without compromising clinical quality, • Has the ability to effectively train employees, lead by example and use motivational techniques to improve/maintain employee engagement, • Patient-centered, organized, high-integrity, motivational, attention to detail, dependable, quality focus, empathetic, good listener/communicator, a good teacher, able to lead a group of individuals, • Energetic, highly motivated, team player with excellent attention to detail; discretion and confidentiality essential as position deals with highly sensitive and private health information Job Salary: An employee in this position can expect a salary rate between $110,000 and $140,000 plus bonus pursuant to the terms of any bonus plan if applicable. The actual salary will depend on experience, seniority, geographic location, and other factors permitted by law. California residents employed by or applying for work at Shields have certain privacy rights. Please review our: California Workforce Privacy Notice and Privacy Policy. By providing your mobile number, you agree to receive text messages from Shields Health Solutions related to job opportunities, interview scheduling, and recruiting updates. Message and data rates may apply. You may opt out at any time by replying 'STOP.' Consent is not a condition of employment. Solid computer skills are required, including proficiency in Microsoft Office tools (Outlook, Teams, Word, Excel, and PowerPoint) for communication, documentation, and data management, as well as, navigating the internet and web-based platforms. Data entry and computer skills will be evaluated through an assessment as part of the pre-employment process. Shields Health Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Shields Health Solutions is committed to providing an inclusive hiring experience; if you need assistance or accommodation during the application or interview process, please email talentacquisition@shieldsrx.com.

Job Description Job Title: Psychiatric Nurse Practitioner (Part-Time) Reports to: Outpatient Program Manager Location: Hasbrouck Heights, NJ Status: Part-Time (up to 20 hours per week; 2 in-office days, 1 hybrid day) Summary of the Position The Psychiatric Nurse Practitioner (PMHNP) is responsible for providing comprehensive psychiatric evaluations, medication management, and ongoing psychiatric care to clients receiving outpatient mental health services at Savia Community Counseling. This role functions as part of a multidisciplinary treatment team and supports a collaborative, client-centered model of care. The PMHNP provides services to clients who have already completed an initial therapy evaluation and works closely with therapists and leadership to ensure continuity, quality, and appropriateness of care. This position requires strong clinical judgment, timely documentation, and collaboration with internal teams. In addition to psychiatric evaluations and medication management, the PMHNP may provide clinical oversight of the agency's Transcranial Magnetic Stimulation (TMS) program, including patient evaluations, initial motor threshold mapping, treatment planning, and ongoing clinical monitoring. Key Responsibilities Clinical Care & Service Delivery Conduct comprehensive psychiatric assessments and diagnostic evaluations in an outpatient setting Develop, implement, and monitor individualized medication treatment plans Provide ongoing medication management, monitoring of symptoms, and adjustment of treatment as clinically indicated Assess risk, safety, and level of care needs, making appropriate referrals when necessary Educate clients (and families when appropriate) on diagnoses, medications, treatment options, and potential side effects Provide psychiatric services both in person and via telehealth in accordance with New Jersey regulations and organizational policies Collaboration & Integrated Care Collaborate closely with outpatient therapists, supervisors, outpatient program manager and other providers to ensure coordinated and integrated treatment planning Participate in clinical consultations, case discussions, and interdisciplinary meetings as requested Communicate effectively with referral sources and internal team members to support continuity of care Documentation & Compliance Maintain timely, accurate, and compliant clinical documentation within the electronic medical record (EHR) Ensure all documentation meets agency, payer, and regulatory requirements Comply with HIPAA, professional standards, and ethical guidelines Professional Practice Stay current with evidence-based psychiatric practices and psychopharmacology standards Participate in required trainings and continuing education activities Uphold Savia Community Counseling’s mission, values, and standards of care Transcranial Magnetic Stimulation (TMS) Services Evaluate patients for appropriateness of Transcranial Magnetic Stimulation (TMS) treatment through psychiatric assessment and clinical determination. Perform the initial TMS motor threshold determination (mapping) and establish individualized treatment parameters in accordance with manufacturer guidelines and evidence-based clinical practices. Develop and approve each patient's TMS treatment plan and provide clinical oversight throughout the course of treatment. Collaborate closely with the TMS Technician to ensure safe and accurate implementation of the prescribed treatment protocol. Monitor patient progress throughout treatment, evaluate clinical response, address side effects, and make treatment adjustments when clinically indicated. Re-evaluate patients at appropriate intervals to determine treatment effectiveness and the need for continuation, modification, or completion of TMS therapy. Maintain accurate and timely documentation related to TMS evaluations, mapping, treatment plans, and follow-up visits within the electronic health record (EHR). Collaborate with the administrative team regarding prior authorizations, medical necessity documentation, and insurance requirements when applicable. Participate in required TMS trainings and maintain competency in current clinical protocols and manufacturer recommendations. Qualifications Master’s or Doctorate degree in Nursing with a Psychiatric Nurse Practitioner specialization Board Certification as a Psychiatric-Mental Health Nurse Practitioner (PMHNP) Active and unrestricted New Jersey Nurse Practitioner license Minimum of 3–5 years of experience providing psychiatric evaluations and medication management in an outpatient or similar setting Experience administering Transcranial Magnetic Stimulation (TMS) preferred but not required Strong clinical judgment, organizational skills, and ability to work independently within a team-based model Work Environment & Support Supportive, collegial multidisciplinary clinical team Full administrative support including scheduling, billing, credentialing, marketing, and office management Modern electronic medical record system Client-centered treatment model: all new clients complete an initial therapy evaluation prior to psychiatric services

Job Description Fire Alarm Technician Currently looking for an experienced and capable alarm technician(s). The ideal candidates should have 4 plus years’ experience, be knowledgeable installing & programming most commonly installed equipment, such as Fire Alarm, CCTV, & Access Control and be able to work independently and manage all field related responsibilities. To be considered for this position please reply to this email with a current resume. Should we be interested in discussing this position in greater detail someone from our office will reach out to schedule an interview. Looking forward to hearing from you! Expected Start Date: Immediately Job Type: Full-time Pay: Up to $35.00 per hour

Job Description RVE an Ardurra company is seeking a water/wastewater inspector with experience in the field of water and sewer construction. The ideal candidate should be familiar with gravity sanitary main, sanitary force main, pump station and wastewater treatment plant components and operation. The individual should also be versed in water main installation, water supply distribution systems and the components and operation of water treatment plants. The individual may also inspect storm sewer systems and roadway construction. The candidate should have a minimum of 5 years’ experience in this field. They will provide construction observation and project management services for municipal and county agencies. PRIMARY DUTIES: • Perform constructability and plan reviews prior to construction. Interact with the design engineer with input after the project goes out to bid., • Perform construction management services for projects that consist of water supply and sanitary distribution systems. Including work in water and wastewater plants. Ensure the job site is maintained in a safe, neat, and orderly fashion by the contractor., • Provide inspection of contractors work to ensure that the work is being performed as per plans and specifications and regulatory requirements. Communicate with the project manager daily about the progress on the project. Keep the client informed of the project’s progress., • Attending and running pre-construction & weekly progress meetings with the client and contractor and give input on issues that arise during construction. Follow through with RFIs to maintain the project runs as scheduled and communicate with Engineering Team., • Conduct on-site observations of the work in progress to assist Engineer in determining if the Work is proceeding in accordance with the Contract Documents, both alone and/or as part of a team., • Keep a diary or logbook of all observations and daily activities for ongoing work and provide Engineer with daily reports to include all labor trades and equipment supplied by Contractor., • Review applications for payment with Contractor and confer with Engineer on recommendations for progress payments., • Be knowledgeable of NJDEP procedures and requirements for management of a project., • Perform field testing of materials installed and start-up and acceptance of equipment., • Prepare a final punch list at substantial completion and perform final project review for project closeout., • Construction and building inspectors examine worksites, both alone and as part of a team. Some inspectors climb ladders or crawl in tight spaces. Most work full time during regular business hours. KNOWLEDGE, SKILLS, and ABILITIES: • Applicant must have demonstrated experience in water/wastewater inspections., • Good communication skills, with the ability to work with others and the public, • Self-motivated, organized, and focused, with good attention to detail Education and Experience Requirements: • Minimum of 5 years of construction observation or construction experience directly related to one of the following disciplines: water supply and distribution systems, sanitary sewer collection and water / wastewater treatment systems, and roadway construction., • High School diploma or equivalent, • Must have computer literacy in Microsoft Office and Microsoft outlook. CERTIFICATIONS/LICENSES REQUIRED • Valid Driver’s License, • NICET Certification a plus, • Traffic Control Coordinator, • Work Zone Safety The employee may also be required to accrue and/ or renew the following certifications at the discretion of the Department Head after the date of hire • NICET – Highway Construction, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • NACE - CIP Level 1, • OSHA - 10/30, • NASSCO - Pipe Assessment, • Confined Space Training Compensation is based on experience, qualifications, and other job-related factors. The expected hourly rate for this position is $30 to $45 The firm also offers a comprehensive benefits package, including medical, dental, and vision insurance, paid time off, paid holidays, and a 401(k) retirement savings plan. Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-KS2

Job Description Come rise above with Yona! Our employees are instrumental in maintaining a happy, healthy, and clean environment for the residents. We depend on our team members to be highly motivated, committed, and compassionate individuals who share our vision and work together to attain it. Our work environment encourages responsibility for personal growth and promotes pride in each employee. You will play an essential role in providing warm and friendly hospitality to all the residents, visitors, and coworkers. The Environmental Services Manager plans, organizes, develops and directs the overall operation of the housekeeping and laundry department in a skilled nursing facility in accordance with current federal, state, and local standards, guidelines, and regulations governing the facility. You will be responsible for coordinating and supporting all activities of the department and work with all levels of facility staff to ensure the facility is clean, sanitary, safe, secure, and adequately supplied so the highest degree of quality resident care can be maintained at all time. Benefits of Yona • Comprehensive medical, dental, and vison insurance, • Employer paid life insurance, • 401(k) plan, • Competitive paid time off, • Employee assistance program, • Wages on demand, • Discount & wellness programs, • Career growth Responsibilities: • Interviews, hires and orients housekeeping, floor care, and laundry staff, • Trains workers in housekeeping, laundry, and floor care procedures and proper operation and maintenance of equipment, • Plans, organizes, directs, coordinates and supervises functions and activities of the departments, • Supervises and evaluates the quality of work completed by department employees, • Maintains an environment that is in sanitary, attractive and in orderly condition, • Forecasts and plans the purchase of cleaning supplies, chemicals and equipment, • Plans work and staffing schedules to ensure adequate services are rendered. Maintains proper staffing levels, • Maintains required records including but not limited to; inventory, compliance, income/expense, and personnel records, • Conducts regular management staff meetings and communicates with members of other departments to coordinate housekeeping activities, • Manages a cost-effective program to budget, • Maintains the department to be survey-ready at all times, assuring the department operates within federal, state, and local regulations, • Maintains excellent relations with residents, visitors, and all community departments, • Actively participates in facility meetings and committees, • Follows all Company policies and procedures, • Promotes the professional growth and development of the entire departmental team, • Conducts quality assurance rounds and inspections to ensure current quality controls and methodologies are suitable and sustainable, • Reports monthly initiatives, goals, and accomplishments, • Promotes and monitors resident satisfaction, • Performs the job assignments of a housekeeper, laundry worker or floor care technician as necessary, • Other job duties as assigned by the supervisor Requirements: • Four year college degree and equal related experience strongly desired; high school diploma/GED required, • Two years experience in housekeeping services in a healthcare environment and personnel supervision is desired, • Skilled in motivating and supervising staff members, • Excellent interpersonal skills, customer service and quality attitude, • Ability to work under pressure and meet established goals and objectives, • Public speaking skills, • Excellent stress management skills, administrative and organizational, and follow-through (with associates and clients) skills required, • Ability to interact positively with residents, client and other personnel and the public, • Ability to work all shifts as needed, • Proficient in the use of Windows based office software including but not limited to Microsoft Office, Word, Excel, PowerPoint and Outlook, • Must be able to work around cleaning chemicals, • Must be able to lift/carry a maximum of 50 pounds, push/pull a maximum of 50 pounds, stand, sit, bend and walk for extended periods of time This posting in no way states or implies that these are the only duties to be performed by the employee occupying this position. Candidates/employees may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. Certain job functions described herein may be subject to possible modification in accordance with applicable state and federal laws. Yona provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. IND123

Job Description GENERAL NATURE OF POSITION: The Residential Worker is responsible for carrying out the day-to-day function in the house. This includes securing the well-being and safety of the residents. Responsibilities also include keeping up with maintenance and repairs of the house, the vehicle, appliances, and equipment. The Residential Worker reports directly to Program Manager. ESSENTIAL JOB FUNCTIONS: · Track unusual and major incidents · Participates in staff meetings and other meetings as appropriate · Responsible for being on-call · Performs other related duties as assigned · Providing support and guidance to the individuals in the house to ensure the following: · That the house, the appliances, the vehicles and the equipment are safe, operational and in good working order. · That the fundamental rights of each adult in the house are protected · Residential Workers are bound by an 8 hour shift. The following are the specific duties within a job typical X-hour shift. Hours and duties may vary depending upon specific circumstances and will be handwritten and initialed into this employment agreement. · Responsible for overseeing all cleaning duties by clients. · Responsible for cleaning anything that have not been completed by the clients. · 3pm-11pm · Supervising and assisting the individuals in the house with menus, food preparation, housekeeping, personal care, laundry, and other activities of daily living. · Planning and coordinating appropriate leisure, social and daily living activities in the residence and in the community. This includes transporting the individuals to and from their destinations. These activities also include shopping trips and medical, dental, and mental health appointments. · Assuming responsibility for the individuals in the house during the day when they are unable to attend the day program (e.g. for illness, inclement weather, etc.). The supervisor will make every effort to arrange coverage, however, the final responsibility rests on the residential staff. · Meeting deadlines and completing all necessary paperwork. This includes quarterly reports, monthly reports, fire drill records, attendance records, weight charts, house receipts, daily logbook, etc. · The Residential Worker shall be trained by Real House, Inc.’s APN and will carry out the duties of Medication Technician · 11pm-7am During the hours of 11pm-7am, the House Manager will be offered adequate sleeping facilities by Real House, Inc. · 7am-3pm (7am-9am) Responsibilities include providing assistance to the extent necessary for each of the individuals in the home to prepare for their day. That includes assisting with all personal hygiene tasks, dressing, preparing breakfast and cleaning up afterwards. (9am-3pm) During this shift the House Manager is considered “on call”, however remaining on the premises is typically not necessary. Being “on call” requires that you leave information with your supervisor as to where you may be reached. QUALIFICATIONS: Required and Preferred Education and Experience: · High School diploma or general education degree (GED); and one to two years related experience and/or training; or equivalent combination of education and experience. · Ability to work with diverse populations. · Good oral and written English skills. · If an individual is in recovery, five-six years of sustained recovery is required. · Ability to work well within a team environment. · Computer skills: Microsoft Office and web-based application. · Ability to answer telephone calls in a professional manner and assists callers · The Residential Worker must be at least 25 years Physical Requirements: · Ability to lift 50 pounds · Occasionally required to stand and walk. Certificates and Licenses: · CPR and First Aid · Must successfully pass a background check prior to hire.

Job Description RVE (an Ardurra company) is seeking a Construction Inspection Manager to join our team in Secaucus, New Jersey. Our Construction Inspection team provides comprehensive oversight and technical expertise to help clients successfully deliver infrastructure and capital improvement projects from pre-construction through completion. Serving as trusted partners and owner's representatives, our professionals ensure projects remain compliant with contract requirements, regulatory standards, schedules, and quality expectations while protecting our clients' interests throughout every phase of construction. Our multidisciplinary team includes licensed Professional Engineers and NICET-certified Resident Engineers with specialized certifications in concrete inspection, corrosion protection, asphalt technologies, and traffic control. Supporting projects across transportation, water, wastewater, municipal, and land development markets, we provide resident engineering, construction inspection, contract and grant administration, and program management services to help clients minimize risk, maintain quality, and deliver successful projects on time and within budget. Primary Function: The Construction Inspection Manager is a proven team leader in the construction field and has over 15 years of experience in Civil and Infrastructure construction projects. The individual’s experience should be in overseeing and managing both projects and a team of construction inspectors including contract administration services. This position is a supervisory and construction management role and will be directly responsible for all construction operations for the Secaucus Regional Office. This individual will manage and supervise a staff of construction inspectors and will collaborate with engineering project managers and administrative staff. This position will report directly to the Regional Manager. Supervised staff shall be responsible for successful inspection and contract administration of a diverse variety of projects. Such projects shall include the rehabilitation and replacement of municipal roads, underground utilities (drainage, sanitary sewer systems, combined sewer systems, potable water systems), park and recreational facilities, private land development. This individual will also collaborate with other company inspection managers for occasional overlap with water/wastewater projects and vertical/building projects. Primary Duties: • Design to construction phase transition coordination with design team including constructability reviews during design phase and assumption of project responsibility from preconstruction conference through project close-out., • Responsible for project construction phase planning, staff assignments, coordination with other departments and offices to balance dynamic construction scheduling needs (resource planning) and hiring., • Continued quality control of all payment certifications., • Lead and promote daily communication across Inspection teams and timely communication with design team and clients as needed, • Identify, scope and administer field changes for unforeseen conditions including change order cost and schedule negotiation, • Implement staff development protocols, including skills training and certifications, • Application and enforcement of company policies, • This is a full-time supervisory position of a construction inspection team Education and Experience Requirements: • Two-year technical or associate’s degree in construction technology or construction management are a plus., • Excellent oral and written communication skills, • Proven leadership capabilities, • Strong organizational and time management skills, • Proficient with inspection software, Microsoft Office Suite and related programs, • OSHA Certifications 10/30 preferred, • NICET Certifications I preferred, II, III a plus, • ACI - Field Technician Certification preferred, • New Jersey Society of Asphalt Technicians - Field Testing preferred, • NJDOT - Traffic Control Coordinator preferred, • Work Zone Safety preferred, • Confined Space Training preferred Salary Range: The salary range for this role is $94,000 - $122,200 annually. Benefits: Medical, dental, vision, 401(k), Paid Time Off Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-HM1

Job Description Our client is a boiler, burner, and water heater service company serving commercial and residential customers across northern New Jersey. Our reputation is built on getting a technician to the customer quickly and making sure that technician arrives with the right part on the truck. We are hiring a Service and Inventory Manager to own both halves of that equation. This is a hands-on leadership role that sits between the field and the warehouse. On any given morning you will be dispatching technicians to service calls, walking a technician through a no-heat diagnosis over the phone, pulling parts for the next installation, and placing an order with a supplier before stock runs thin. The person who succeeds here is a heating professional first and an administrator second: someone who knows what a low-water cutoff does, knows which circulator the shop tends to burn through, and knows how to keep a crew organized without micromanaging it. You will directly supervise the field service team and carry full responsibility for the parts and equipment inventory that keeps them productive. It is a role with real authority over scheduling, purchasing, and stocking decisions, and real accountability for response times, first-visit completion rates, and inventory accuracy. KEY RESPONSIBILITIES Team and Service Management You will run daily operations for the service department and act as the primary technical resource for the field. • Direct daily operations for the service technician team, including start-of-day assignments and end-of-day close-out., • Schedule and dispatch repair, maintenance, and installation jobs, balancing emergency calls against planned work., • Serve as the escalation point for technical troubleshooting on boilers, burners, and water heaters, supporting technicians by phone or on site as needed., • Coach and develop technicians on diagnostic technique, workmanship standards, and customer interaction., • Coordinate with customers and office staff on job status, timelines, and follow-up work., • Enforce safety practices and code compliance across all field work. Inventory Control and Procurement You will own the parts and equipment inventory end to end, from stocking levels to what goes on the truck each morning. • Track stock levels of boiler parts, burner components, water heaters, fittings, controls, and tools., • Procure material and equipment for immediate jobs as well as for shelf stock, working with suppliers on pricing, availability, and lead times., • Order replacement parts and equipment and track open orders through to receipt., • Stage and prepare material and equipment for field technicians ahead of scheduled jobs., • Conduct regular physical inventory counts and reconcile against system records., • Prevent stock shortages on high-turn items while reducing waste, obsolescence, and overstock., • Maintain an organized, well-labeled warehouse and shop area. Requirements Required • Working technical knowledge of hydronic and steam heating systems, including boilers, burners, water heaters, controls, and related piping., • Prior experience supervising, leading, or coordinating a field service or trades team., • Demonstrated experience tracking inventory, purchasing parts, or managing stock in a service, distribution, or contracting environment., • Strong interpersonal and communication skills, with the ability to work effectively with technicians, customers, and vendors., • Organized and detail-oriented, able to manage competing priorities in a fast-moving service environment., • Comfortable with scheduling, dispatch, and inventory software, and with basic spreadsheet work., • Valid driver's license and a clean driving record. Preferred • Five or more years in the boiler, burner, HVAC, or plumbing trades, with a background as a service technician., • New Jersey Black Seal low-pressure boiler operator license, HVACR license, or comparable trade certification., • Experience with commercial boiler and burner service in addition to residential work., • Familiarity with northern New Jersey supply houses and manufacturer distribution channels., • Experience establishing min/max stocking levels or reorder points. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Compensation: $80,000 - 90,000