Requirements engineer jobs in Commack, New YorkCreate job alerts

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

ATE Engineer – Hauppauge, NY · 10+ years overall experience in test system software & test hardware development · Strong knowledge in handling NI PXI, PCI Hardware ( DAQ Cards, Chassis). Integrate 3rd party hardware. · Experience in development/ Upgrading automated test equipment , avionics, aerospace programs is a plus. · High level of expertise in developing automated testing equipment for production testing of mixed-signal products and sub-assemblies for MIL/Aerospace applications including analog circuits, embedded microprocessors and FPGAs, and supporting circuitry and power supplies. · Experience or knowledge of RS422/RS232, ARINC, AFDX interface knowledge, TCP/IP & Ethernet, UDP and such communication standards, protocols and/or interfaces is desirable · Experience in managing Software code repositories and Continuous Integration/Deployment is highly desirable · Strong verbal and written communication skills. · Common I/O protocols (I2C, SPI, JTAG, RS-232, RS-422, RS-485, Arinc 429, MIL-STD-1553, etc). · Solid foundation of LabView expertise · High level of experience with hands-on troubleshooting and turn-on of new test systems, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc. · Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents · Skilled in the use of common test bench equipment such as multimeters, DAQs, oscilloscopes, power supplies, RF and optical spectrum analyzers · Hands-on and extremely strong in system bring-up, troubleshooting, calibration, etc. · High level of expertise in NI LabVIEW , Test Stand & Phyton · Experience in reading schematics · Experience in test equipment failure analysis and troubleshooting skills in a production environment. · Experience with prototyping solutions and bench testing methodology · Experience in testing to MIL-STD-810, MIL-STD-461, MIL-STD-1275, RTCA/DO-160 and IPC-610 requirements.

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: No CLEARANCE TYPE: Secret TRAVEL: Yes, 25% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman is currently seeking a Propulsion Engineer – Level 2 or 3 to join our team at our Palm Beach Gardens, Florida location to support the Propulsion Systems and Controls (PS&C) business unit. The Northrop Grumman PS&C business unit is based in Elkton, Maryland and began solid-propellant rocket operations in 1948. Today, the Elkton PS&C facility designs, develops, and produces solid-propellant propulsion and ordnance systems in programs professionally managed for a wide variety of Government and commercial customers. The Palm Beach Gardens location is the Air-breathing propulsion center of excellence specializing in the design, analysis and system integration of ramjets, scramjets and other advanced air-breathing propulsion systems. Palm Beach Gardens, Florida is located a very short distance from the Atlantic Ocean. You would be close to many top beaches, fishing, inland eco-tours, shopping, and restaurants. Palm Beach Gardens also has many top golf choices and is home to The Professional Golfers Association of America and PGA National Resort. Perform design of one or more moderately complex or portions of structural components and functional systems of company products. Generally work from preliminary studies developed by higher graded engineers. Analyze requirements for materials, structural component, or functional systems. Select applicable analytical data from previous products, determine the technical principles involved, mathematically define the problem and compute the engineering characteristics consistent with the specifications, design needs and requirements of other portions of the product. Release results as design data after review by higher graded engineer. Develop original ideas and elaborate on preliminary design concepts. Evaluate completed design with supervisor and other technical groups and make modification necessary to achieve the most ideal design. Job Responsibilities · Performs design of one or more moderately complex or portions of structural components and functional systems · With limited supervision, applies theoretical knowledge and engineering techniques to the solution of more complex components, structures, and sub-assemblies · Responds in a timely manner to all requests and explores all avenues within authority and makes appropriate referrals to other sources · Makes thoughtful and valuable suggestions and recommendations for improving own work and/or group’s work · Establish requirements for materials, structural components, and functional systems · Release results as design data after review from other engineers · Document results of design activities The level of hire will depend upon demonstrated education, experience, skills, and competency. Basic Qualifications for level 2 · Requires Bachelors in STEM plus 2 years of related experience or Master’s Degree in STEM, Aerospace or Mechanical Engineering strongly preferred · Ability to obtain a Secret Clearance which requires US Citizenship as a pre-requisite · Excellent interpersonal, communication, writing, presentation and critical thinking skills · Proficiency with Microsoft Office suite (Excel, Word, Power Point) · Working knowledge of computer aided design (CAD) software · Knowledge of ASME Geometric Dimensioning and Tolerancing (GD&T) Basic Qualifications for level 3 · Requires Bachelors in STEM plus 5 years of related experience or Master’s Degree in STEM plus 3 years of experience or PhD in STEM plus at least 1 year of experience, Aerospace or Mechanical Engineering strongly preferred · Ability to obtain a Secret Clearance which requires US Citizenship as a pre-requisite · Proficiency with Siemens NX · Knowledge of ASME Geometric Dimensioning and Tolerancing (GD&T) · Ability and willingness to travel Preferred Qualifications both levels · Current active Security Clearance · Working knowledge of NX · Knowledge of general machine shop fabrication processes, additive manufacture experience desirable · Understanding of design for assembly / design for manufacturing (DFA/DFM) · Ability and willingness to travel Primary Level Salary Range: $83,400.00 - $131,400.00 Secondary Level Salary Range: $103,600.00 - $163,200.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit . U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: No CLEARANCE TYPE: Secret TRAVEL: Yes, 25% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman is currently seeking a Staff Propulsion Engineer to join our team at our Palm Beach Gardens, Florida location to support the Propulsion Systems and Controls (PS&C) business unit. This position can also be worked at our Elkton, Maryland or Ronkonkoma, New York locations. The Northrop Grumman PS&C business unit is based in Elkton, Maryland and began solid-propellant rocket operations in 1948. Today, the Elkton PS&C facility designs, develops, and produces solid-propellant propulsion and ordnance systems in programs professionally managed for a wide variety of Government and commercial customers. The Palm Beach Gardens location is the Air-breathing propulsion center of excellence specializing in the design, analysis and system integration of ramjets, scramjets and other advanced air-breathing propulsion systems. Palm Beach Gardens, Florida is located a very short distance from the Atlantic Ocean. You would be close to many top beaches, fishing, inland eco-tours, shopping, and restaurants. Palm Beach Gardens also has many top golf choices and is home to The Professional Golfers Association of America and PGA National Resort. Job Summary Perform mechanical design of one or more extremely complex structural components and functional systems of company products. Generally, work from statement of work from the customer and generates derived requirements for other engineers. Analyze requirements for materials, structural components, or functional systems. Select applicable analytical data from previous products, determine the technical principles involved, mathematically define the problem and compute the engineering characteristics consistent with the specifications, design needs and requirements of other portions of the product. Oversee and guide work performed by junior engineers. Develop original ideas and elaborate on preliminary design concepts. Work checked through consultation and agreement with others rather than by formal review of superior. Evaluate the designs of lower-level engineers and provide guidance. Job Responsibilities · Provide technical direction, with supporting input from relevant subject matter experts · Apply theoretical knowledge, engineering techniques, and test data to the solution of more complex components, structures, and sub-assemblies. Solutions are highly innovative and ingenious. · Works under consultative direction toward predetermined long-range goals and objectives. Assignments are often self-initiated · Determine and pursue courses of action necessary to obtain desired results. Work checked through consultation and agreement with others rather than by formal review of superior. · Establish requirements for materials, structural components, and functional systems · Determine engineering tasks required for project planning and execution · Review designs of lower-level engineers, provide guidance of design activities · Make recommendations for improving own work and/or group’s work · Serves as organization spokesperson on advanced projects. Act as advisor to management and customers on advanced technical research and applications. · Ensure that the product line is adhering to contractual and technical data package requirements · Ensure communications with the internal and external teams are taking place across the entire programmatic portfolio · Lead the engineering effort to accomplish major milestones, such as: design reviews, technical interchange meetings, test design reviews and test readiness reviews · Support earned value performance tracking of various programs in the portfolio Basic Qualifications · Requires Bachelors in STEM plus at least 12 years of design experience or Master’s Degree in STEM plus at least 10 years of design experience or a PhD in STEM plus at least 8 years of design experience. · Prior experience guiding and mentoring lower-level engineers · Ability to obtain a Secret Clearance which requires US Citizenship as a pre-requisite · Proficiency with Siemens NX · Ability and willingness to travel 10-25% Preferred Qualifications · Degree in strongly Mechanical or Aerospace Engineering · Experience with mechanical design of propulsion components or fluid systems · Current active Security Clearance · Proficiency with Siemens Teamcenter United Architecture · Ability to interpret and apply Geometric Dimensioning and Tolerancing (GD&T) Primary Level Salary Range: $161,000.00 - $241,400.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit . U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: No CLEARANCE TYPE: Secret TRAVEL: Yes, 25% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman is currently seeking a Sr. Principal Propulsion Engineer to join our team at our Palm Beach Gardens, Florida location to support the Propulsion Systems and Controls (PS&C) business unit. This position can also be worked from the Elkton, Maryland and Ronkonkoma, New York locations. The Northrop Grumman PS&C business unit is based in Elkton, Maryland and began solid-propellant rocket operations in 1948. Today, the Elkton PS&C facility designs, develops, and produces solid-propellant propulsion and ordnance systems in programs professionally managed for a wide variety of Government and commercial customers. The Palm Beach Gardens location is the Air-breathing propulsion center of excellence specializing in the design, analysis and system integration of ramjets, scramjets and other advanced air-breathing propulsion systems. Palm Beach Gardens, Florida is located a very short distance from the Atlantic Ocean. You would be close to many top beaches, fishing, inland eco-tours, shopping, and restaurants. Palm Beach Gardens also has many top golf choices and is home to The Professional Golfers Association of America and PGA National Resort. Job Summary Perform mechanical design of one or more moderately complex structural components and functional systems of company products. Generally, work from preliminary studies developed by higher graded engineers. Analyze requirements for materials, structural components, or functional systems. Select applicable analytical data from previous products, determine the technical principles involved, mathematically define the problem and compute the engineering characteristics consistent with the specifications, design needs and requirements of other portions of the product. Oversee and guide work performed by junior engineers. Develop original ideas and elaborate on preliminary design concepts. Evaluate completed design with supervisor and other technical groups and make modification necessary to achieve an ideal design. Job Responsibilities · Provide technical direction, with supporting input from relevant subject matter experts · Apply theoretical knowledge, engineering techniques, and test data to the solution of more complex components, structures, and sub-assemblies · Establish requirements for materials, structural components, and functional systems · Determine engineering tasks required for project planning and execution · Document results of design activities and release results after review from other engineers · Make recommendations for improving own work and/or group’s work · Represents the organization as the prime technical contact on projects · Ensure that the product line is adhering to contractual and technical data package requirements · Ensure communications with the internal and external teams are taking place across the entire programmatic portfolio · Lead the engineering effort to accomplish major milestones, such as: design reviews, technical interchange meetings, test design reviews and test readiness reviews · Support earned value performance tracking of various programs in the portfolio Basic Qualifications · Requires Bachelors in STEM plus at least 8 years of design experience or Master’s Degree in STEM and at least 6 years of design experience or a PhD in STEM and at least 4 years of design experience · Prior experience guiding and mentoring lower-level engineers · Ability to obtain a Secret Clearance which requires US Citizenship as a pre-requisite · Proficiency with Siemens NX · Ability and willingness to travel 10-25% Preferred Qualifications · Degree in Mechanical or Aerospace Engineering strongly preferred · Experience with mechanical design of propulsion components or fluid systems · Current active Security Clearance · Proficiency with Siemens Teamcenter United Architecture · Ability to interpret and apply Geometric Dimensioning and Tolerancing (GD&T) Primary Level Salary Range: $129,300.00 - $193,900.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit . U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

For more than 50 years, ENSCO has been providing leading-edge engineering, science and advanced technology solutions to governments and private industries worldwide. ENSCO prides itself in creating and applying advanced technologies for mission success. We provide systems engineering, integration, and advanced technology services to transform the future safety, security, and resiliency of critical missions on the ground, in the air, in space, and in the information systems that connect these domains. ENSCO Avionics, Inc. has an exciting opportunity for a Software Engineer skilled in software integration and verification for embedded avionic engine and flight control systems. Work is performed in team environment with on-site and near site opportunities. The test environment includes VectorCast and Green Hills though similar tool experience will be accepted. Software will be developed using C code or customer-based scripts and run in Lab environment on the test simulation systems. Knowledge of hardware integration and debug will be a plus though not required for the position. Integration will include software emulators and debuggers to control the system down to the lowest level of operation. The position will require the development of formal Requirements Based Test procedures. The requirements, test procedures, and results will be placed in CM system and traced via DOORS to meet DO-178C standards. The position will include a good mix of requirements review, software development, simulation testing, and system level testing in avionic lab environment. Qualifications Required • Bachelor's or equivalent with 3+ years related experience, • Experience with C, linux shell scripts, or similar software test scripts, • Experience with formal requirements and developing software test cases and procedures., • Experience with HW/SW debug with embedded control systems, • Excellent verbal communication skills - must be able to communicate effectively in teleconferences with suppliers, clients, and colleagues, • Excellent interpersonal skills including working in team environments, • Must be able to obtain a U.S Secret Security Clearance, for which you must be a U.S Citizen Qualifications Desired • Experience with Lab environment integration, • Experience with Embedded software tools such as VectorCast and Green Hills, • Experience with Test Equipment Script languages such as Python, • Experience with Configuration systems such as GITHUB, Synergy, and DOORS Required Certifications: None U.S. Citizenship Required: Yes Security Clearance Required: Ability to Obtain Employment Type: Regular Full-time Background Check Type: 7 Year Pre-Employment Drug Screen Required: No Position Contingent Upon Contract Award: No Salary Range$73,000—$105,000 USD REAL ID Requirement This position may require the ability to access to U.S. federal facilities. In accordance with the Department of Homeland Security's enforcement of the REAL ID Act, as of May 7, 2025, individuals must present a REAL ID-compliant form of identification or an acceptable alternative to gain entry. For a list of acceptable forms of identification, ___. Benefits At ENSCO, a positive working environment and a competitive salary are only part of the reason for choosing a career here. We offer a comprehensive benefits package that creates a stimulating and supportive environment where you can thrive - visit___ to learn more. Export Control and Licensing This position may involve access to technology or technical data that is controlled under U.S. export control laws and regulations and the release of which to a non US person may require an export license from the U.S. Government. Privacy Your data privacy is important to ENSCO. Please ___. California residents can ___. EEO Statement ENSCO, Inc. and its wholly owned U.S. subsidiaries are Equal Opportunity Employers- veterans, disability

Job Description Sales Engineer – Datcom and Electrical products (cable trays) Location: National, (NY Metro Preferred) Position Overview: We are seeking a high-preforming Sales Engineer with expertise in cable tray systems to drive specifications and sales growth within the data center market. This position will focus on building new relationships with data center developers, general contractors, electrical contractors, engineers, and end users to promote innovative cable management solutions. The ideal candidate understands the fast-paced data center construction environment and has experience selling cable tray and other related electrical infrastructure products. Key Responsibilities: · Develop and create a strategic sales plan targeting hyperscale, colocation, enterprise, and edge data center projects · Drive product specifications with engineers, end users, consultants, and design-build construction firms. · Build and maintain strong and prosperous relationships with: o Data center developers and owners o Electrical contractors o MEPC, AE Firms, and Engineering consultants o Distribution partners · Identify upcoming projects nationally and position Snake Tray early in the design phase · Schedule and conduct product presentations, lunch-n-learns, and technical training sessions · Attend and work at industry trade shows · Manage project pipelines, forecast, and reporting · Collaborate with inside sales and engineering teams to deliver project-specific solutions · Structure project pricing and increase revenue growth Qualifications: · 5+ years of sales experience in one or more of the following: o Existing relationships within the data center ecosystem o Strong knowledge of cable tray systems o Electrical infrastructure components o Data center products busway/power distribution · Proven track record selling into the data center construction market · Strong understanding of: o NEC codes and requirements o Data center construction build-out process · Ability to read and understand construction drawings and specifications · Familiarity with BIM coordination processes · Strong communication skills · Self-motivated with the ability to travel and manage a national territory Why Snake Tray? · Participate in one of the fastest and most competitive construction sectors · Represent an innovative and high-performing manufacturer of cable management systems · Work with the leading data center developers and contractors · Strong growth potential and increased income-earning opportunities Company DescriptionManufacturer of innovative cable trays, power distribution, and enclosures. Customers include leading companies, government organizations, and educational institutions in the US and globally.Manufacturer of innovative cable trays, power distribution, and enclosures. Customers include leading companies, government organizations, and educational institutions in the US and globally.

Job DescriptionJob Title: Civil Engineer Job Description This Civil Engineer role focuses on delivering high-quality civil engineering design services for residential, commercial, and municipal projects. You will contribute to site development projects that include site layout, grading, drainage, stormwater management, utility routing, and roadway components, while supporting project planning, documentation, and regulatory compliance. The position offers the opportunity to work on diverse projects across NYC and Nassau, collaborate with multidisciplinary teams, and mentor junior staff while progressing toward professional licensure. Responsibilities • Lead and support civil engineering design projects involving site layout, grading, drainage, stormwater management, utilities, and roadway components., • Prepare detailed engineering reports, technical calculations, design drawings, and permitting packages for review and submission., • Assist with project planning, including scheduling, budgeting, and coordination with multidisciplinary teams to meet project milestones., • Participate in client meetings, municipal hearings, and on-site evaluations as needed to present designs and address technical questions., • Ensure all designs and deliverables comply with local, state, and federal regulations, including requirements from NYSDEC, local municipalities, and other regulatory agencies., • Oversee and guide work performed by junior engineers, drafters, and field personnel to ensure consistency and technical accuracy., • Provide quality assurance and quality control (QA/QC) on design deliverables, including drawings, calculations, and reports., • Support hydrologic and hydraulic analyses for drainage and stormwater systems as part of land development projects., • 3+ years of civil engineering experience in site development and related design work., • Proficiency with AutoCAD for civil engineering design and drafting., • Experience with Civil 3D for site layout, grading, and civil infrastructure design., • Hands-on experience with site layout design, grading, drainage systems, utility routing, and sanitary system design., • Experience supporting residential, commercial, and municipal projects, particularly in urban and suburban environments such as NYC and Nassau., • Hydrologic and hydraulic engineering experience related to drainage and stormwater management., • Knowledge of land development processes and associated civil design requirements., • Familiarity with regulatory requirements and permitting processes involving NYSDEC and local municipalities., • Strong ability to prepare engineering reports, technical calculations, and permitting documentation., • Ability to provide oversight and direction to junior engineers, drafters, and field personnel., • Strong attention to detail and commitment to QA/QC in design deliverables., • Effective communication skills for participation in client meetings, municipal hearings, and coordination with multidisciplinary teams., • Experience working on land development projects from conceptual design through permitting and construction support., • Ability to manage time effectively across multiple projects and deadlines., • Comfort working in both office and field environments, including job site visits. Competitive compensation package Health, dental, and vision benefits 401(k) with company match Professional development support, including PE licensure assistance Opportunities for career growth within a respected Long Island engineering firm Workplace Type This is a fully onsite position in Huntington,NY. Application Deadline This position is anticipated to close on May 8, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate has minimum of 4-8 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities include, but are not limited to: • Manage projects, staff and clients., • Work with multi-disciplinary teams on tasks such as work zone traffic, intersection design, traffic signal design, roadway signing and pavement marking plans, DOT access permitting, control plans and traffic signal operations analysis., • Assist in the preparation specifications, plans, construction schedules, impact studies, permits, and designs for projects., • Assist with traffic/parking studies, corridor planning, feasibility studies, and safety audits., • Bachelor’s Degree in Civil Engineering, • Professional Engineering (PE) license in NY required (or ability to obtain within first 6 months), • Professional Traffic Operations Engineer (PTOE) desirable, • Excellent oral and written communication skills, • Experience with design standards, NYSDOT/NYCDOT/CTDOT/NJDOT experience (desirable), • Knowledge of CADD Software (MicroStation or AutoCAD), • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for, for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public and are dedicated to Moving Forward Together.

Job Description A multi-discipline engineering firm with over 70 years in business is looking for a Water/Wastewater Discipline Engineer for their Huntington office! Responsibilities: • Use technical knowledge/experience to lead projects, • Manage projects from planning/design to construction of wastewater conveyance systems (pipelines, pump stations storage, and end-of-pipe treatment facilities), • Prepare, review, and approve project drawings, specifications, schedules, and cost estimates, • Lead construction documents/specifications development, • Manage engineering services during construction, • Coordinate project tasks with other disciplines, • Develop medium/large planning and design projects, • Prepare complete construction packages, • Create/manage cost estimates and project schedule, • Complete tasks on schedule and within budget, • Prepare detailed engineering calculations and analysis, • Assist with business development (proposal development/preparation and client management), • Meet/exceed client expectations, • Mentor/train junior staff Requirements: • Bachelor’s degree in civil, environmental, chemical or mechanical engineering or related field of study, • 8+ years of experience in the planning, design, and construction of municipal water/wastewater, • Prior experience in process design, treatment plants upgrades and pump station design, • Experience writing/developing proposals, • Experience utilizing design software to solve complex issues, • PE License, • Strong data analysis and technical problem solving experience Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description On-Site, Hauppauge, NY Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Job Description We are seeking a highly motivated and technically strong Application Engineer to play a strategic technical role expanding and supporting the adoption of Narda Safety Test Solutions (Narda STS) product lines throughout the United States. Narda STS, based in Germany, is a global leader in RF test & measurement, EMF safety, spectrum monitoring, interference hunting, and EMC/EMI analysis. This position focuses on expanding Narda’s presence across key U.S. markets, including military and defense, government agencies, aerospace, telecommunications, and industrial customers. In this role you will act as the technical authority for Narda products in the U.S., providing end-to-end support, from pre-sales consulting and product demonstrations to application development and post-sales assistance. A critical part of this role includes collaborative technical engagement and brainstorming with customers, including military program offices, system integrators, and field engineers, to help identify mission requirements, design technical use cases, and propose innovative solutions using Narda STS equipment. Key Responsibilities Customer & Applications Engineering • Serve as the primary technical expert for Narda STS equipment including EMF meters, spectrum analyzers, RF interference detectors, RF direction finders, and spectrum monitoring systems., • Conduct product demonstrations for commercial, government, and U.S. military customers (onsite, virtual, and at trade shows)., • Work with customers to design test methods, solve operational challenges, and optimize their use of Narda products., • Engage in brainstorming sessions with defense and enterprise clients to develop application concepts, system configurations, and mission-specific use cases., • Provide Tier 1/Tier 2 technical support and coordinate with engineering teams in Germany for advanced issues., • Support sales initiatives by identifying customer needs and recommending the proper Narda STS solution set., • Prepare customized proposals, technical quotes, and configuration packages., • Support federal and military acquisition processes including RFP/RFQ responses., • Build strong relationships with key accounts in the defense, aerospace, telecom, and industrial sectors., • Collect customer feedback to help guide new product features, development, and roadmap discussions with Narda STS headquarters., • Maintain expertise in RF measurement, EMF regulations, spectrum-monitoring practices, and military-relevant standards., • Frequent domestic travel for customer visits, demonstrations, training sessions, field support, and events. Required • Bachelor’s degree in Electrical Engineering, RF Engineering, Physics, Communications Engineering, or equivalent technical experience with RF systems., • 2+ years in RF test & measurement, spectrum analysis, EMC/EMI, or similar technical field., • Strong understanding of RF concepts (modulation, spectrum behavior, antennas, interference, propagation)., • Proven customer-facing experience in pre-sales engineering, applications support, system integration, or field engineering., • Ability to lead technical discussions and explain complex concepts clearly., • Experience supporting U.S. military customers, defense contractors, or federal agencies., • Strong technical curiosity and problem-solving abilities., • Comfortable brainstorming technical ideas and application scenarios with customers., • Self-starter with excellent organizational and communication skills. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description A confidential, industry-leading RF/microwave manufacturer is looking for an experienced RF Amplifier Design Engineer to design, develop, and test low noise and medium power amplifiers using both discrete transistor and MMIC technologies. You’ll work across hybrid and surface-mount designs, run linear and nonlinear simulations, support production, and contribute directly to new product development. This is a hands-on engineering role with real visibility inside the organization. What You’ll Do * Design, develop, and test discrete and MMIC-based low noise/medium-power amplifiers * Build new RF and microwave circuits, components, and products * Perform linear and nonlinear simulations for active and passive circuits * Define specs for microwave components and subassemblies * Support high-reliability testing and screening requirements * Generate design reviews, test reports, and documentation * Work with manufacturing teams to ensure efficient build processes * Estimate project schedules, track engineering labor, and support technical proposals What You Need * Bachelor’s in Electrical Engineering with 4+ years experience, or Master’s with 2+ * At least 2 years designing and simulating low noise amplifiers * Experience designing passive RF/microwave components (couplers, dividers, attenuators) * Experience designing for manufacturability and managing engineering projects * Proficient with linear CAE tools plus exposure to nonlinear CAE * Hands-on lab/test experience: VNAs, noise figure analyzers, spectrum analyzers, power meters, signal generators * Ability to work under a microscope in a cleanroom environment * Familiarity with semiconductor devices like GaAs and GaN * Strong communication skills * Must be able to obtain a Secret-level security clearance Preferred Experience * Familiarity with MIL-specs: MIL-PRF-38534, MIL-STD-202 * Experience aligning and tuning fine-pitch circuits under a microscope * Knowledge of oscillator, synthesizer, PIN-diode, and filter design * System-level cascade and spur analysis * Proficiency with Keysight ADS, RFPro, Ansys HFSS, and EM simulation tools * CAD familiarity: AutoCAD, Inventor * Design/test experience up to 26 GHz or higher (40 GHz preferred) * Hybrid chip-and-wire and PCB SMT manufacturing exposure * Wire bonding experience

Job Description About CAMP Systems: At CAMP Systems, we are the trusted leader in aircraft compliance and health management, proudly serving the global business aviation industry. With over 20,000 aircraft and 33,000 engines supported on our cutting-edge platforms, and partnerships with more than 1,300 maintenance facilities and parts suppliers worldwide, we’re shaping the future of aviation technology. Since our founding in 1968, we’ve grown to a dynamic team of 1,600+ employees across 14 locations globally—all united by a passion for innovation and excellence. Our Mission & Vision: We connect the aviation industry through smart technology to make flight safer and more efficient, driving the future of aviation with intelligence and exceptional customer experiences. Our Values & Excellence Mindset: We are customer obsessed, trust-driven, owners of our work, stronger together, constantly curious, and boldly innovative. What You Will Experience in This Role: We are seeking a full stack Software Engineer with strong expertise in .NET and Angular to join our talented engineering team. Working part of an Agile Scrum team, you will play a key role in designing, building, scaling, and maintaining enterprise-grade web applications that serve a diverse range of customers. This is a hands-on position, we want someone who is focused, and passionate about coding, and development. You will work closely with product managers, designers, and other developers to create seamless, performant, and highly scalable solutions. We expect all our team members to contribute towards building a culture of continuous learning and improvement. We are open to new approaches and ideas. CAMP offers a unique domain, as well as a chance to be part of a product that affects the readiness, safety, and performance of business aircraft from nearly every major manufacturer. Like many of our team, if you are selected, with hard work, a continued quest for knowledge, and a knack for troubleshooting, there are endless possibilities for growth and development. Responsibilities: • Design & Development: Architect and implement robust, scalable, and high-performance web applications using .NET (Core, ASP.Net, Web API) and Angular and ExtJS., • Code Quality: Write clean, maintainable, and well-documented code following the industry’s best practices. Perform code reviews and mentor junior developers to ensure coding standards are met., • End-to-End Ownership: Manage the full software development lifecycle, from gathering requirements to deployment and ongoing maintenance., • Collaboration: Work collaboratively with cross-functional teams including product managers, designers, QA engineers, and other developers to deliver high-quality features on time., • Performance Optimization: Focus on optimizing the performance of both front-end and back-end components, ensuring the application scales effectively and provides an excellent user experience., • Testing & Quality Assurance: Implement unit tests, integration tests, and other automated tests to ensure the reliability and stability of the application., • Troubleshooting & Debugging: Investigate production issues, resolve defects, and implement preventative measures for future releases., • Backend: Expertise in .NET Core (C#), ASP.NET MVC, Web API, NHibernate, and Oracle (or equivalent relational database systems)., • Frontend: Strong proficiency with Angular, HTML5, CSS3, and TypeScript., • APIs: Experience designing and implementing RESTful APIs and working with OAuth and JWT authentication., • Cloud: Experience with AWS cloud platform., • ML/AI: Experience with LLM integration, NLP, training and utilization of ML models., • Version Control: Proficient in Git for version control., • Unit Testing & TDD: Experience with automated testing frameworks such as xUnit, NUnit, Jasmine., • Enterprise Architecture: Highly proficient with 5+ years of experience building scalable enterprise-grade systems with a focus on performance, maintainability, and extensibility. Solid understanding of object-oriented design and software engineering principles., • Web Application: Solid experience in data driven web applications using Angular, other JavaScript frameworks., • Agile Methodology: Proven experience working in Agile or Scrum development environments., • Containerization: Experience with Docker, Kubernetes, or other containerization technologies., • DevOps: Knowledge of DevOps practices and tools (CI/CD pipelines, infrastructure as code)., • Education: Bachelor’s degree in computer science, Information Technology, or a related field., • Strong problem-solving skills and the ability to think critically and creatively., • Excellent communication skills, both written and verbal, with the ability to collaborate effectively with technical and non-technical team members., • Self-driven with a focus on delivering high-quality results on time., • Ability to handle multiple priorities and navigate complex technical challenges. Compensation range for this opportunity is currently $110k - $120k DOE Why Work at CAMP? Join a culture where your ideas matter, your impact is real, and your growth is supported. Be part of a team reimagining the future of aviation. CAMP is committed to creating a diverse environment and is proud to be an affirmative action and equal opportunity employer – vets/disabled CAMP is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact . All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability or protected veteran status EEO.

Job DescriptionDescription: Job Description The individual will prepare design data for electrical/electromechanical aircraft parts using reverse engineering practices and coordinate with certification and material engineers along with FAA Designated Engineering Representatives. They ensure that design features are consistent with functional performance and safety requirements for the aircraft system installation and with standard manufacturing practices. Additionally, the engineer investigates in-service equipment failures to determine root cause and develop repairs to return parts to service. This requires close communication with the engineering and sales teams to evaluate new project feasibility. Essential Responsibilities • Draft sketches and models of parts, • Conduct dimensional and electrical inspection of sample parts, • Prepare detailed dimensional and electrical analysis reports, • Research part function, failure modes, and operating conditions, • Determine appropriate material and performance specifications based on material analyses and testing, • Develop tolerance limits based on dimensional data, manufacturing capabilities, and part function, • Prepare production drawings using ANSI/ASME Y14.5 GD&T standards, • Troubleshoot failed in-service equipment to develop repair procedures for return to service, • Provide engineering support for procurement, manufacturing, receiving, and certification of parts, • Create technical documents using FAA guidelines and regulations, • Five years of full-time relevant work experience (design, manufacturing, quality), • CAD/3D modeling design experience, • 3+ years of circuit board design, • Familiarity with aerospace specifications and processes, • Demonstrated general knowledge of drafting standards, • Proficient with SolidWorks, AutoCAD, MS Office applications, Adobe Acrobat, • Skilled in writing technical documents, • 3+ years reverse engineering is desired, • Shop time or other hands-on experience is preferred, • Experience with avionics, communications, lighting and/or electrical aircraft systems is preferred, • Understanding and familiarity with FAA standards is preferred Jet Parts Engineering, Inc. (JPE) is an equal opportunity employer. In business since 1994, JPE is an aerospace engineering firm that has established a reputation for supplying high quality parts while providing exceptional service to its customers. For more information, please see . Requirements:

Job DescriptionMulti-discipline architectural, engineering, and environmental consulting firm is seeking a Senior Structural Engineer for their Huntington, New York office! Responsibilities: • Lead/manage the design team in executing/delivering structural engineering assignments and plans, • Prepare calculations, charts and graphs, • Monitor work for code compliance and accepted engineering practices, • Projects include low to mid rise buildings and concrete structures, • Perform inspection/analysis of existing buildings, • Oversee development of construction drawings and design specifications for bids, • Develop proposal letter that includes technical scope and fee, • Prepare client letters and reports, • Manage projected financial budgets, • Mentor/train junior staff Requirements: • Bachelor’s degree in Civil Engineering with a focus on Structural Engineering, • 8+ years of Structural Engineering experience, • EIT required, • PE License preferred, • Experience managing budgets, • Supervisory experience, • Experience writing proposal preferred, • Knowledge of ETABS, STAAD.Pro, RAM preferred, • Knowledge of Revit preferred, • Proficient in Microsoft Word and Excel Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job Description Our mission at iRocket is frequent, affordable access to space. We’re hiring a Launch Engineer to manage end-to-end launch operations, integration, vehicle readiness, and mission execution across sites. The Role • Support vehicle assembly, integration, test (AIT), rollout, countdown, and flight operations., • Develop check-lists, execute vehicle/pad/environment checkouts, manage anomaly response during launch campaigns., • Coordinate with propulsion, avionics, structures, safety, and logistics teams to ensure mission readiness., • Monitor launch-site infrastructure, support logistics, GSE, and range coordination., • Bachelor’s degree in Engineering or related field., • 3+ years of launch operations, systems integration, or mission-execution experience (space or defense sector preferred)., • Strong organizational, communication, and problem-solving skills; comfortable in high-stakes environments., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionJob Title: Project Engineer Job Description The Project Engineer position offers an exciting opportunity to develop project schedules and processes for cutting-edge overhead transmission projects. The Project Engineer will collaborate with functional leads and project managers, engaging in both office and fieldwork to identify critical and near-critical paths. This role offers ample learning opportunities, enabling you to gain hands-on experience and identify trends that keep the project team on track. Responsibilities • Monitor and control project expenditures, ensuring accurate recording of tickets, invoices, and claims from suppliers, vendors, and subcontractors., • Provide planning and cost control support for all projects, including variation reporting, contract progress monitoring, and customer billing preparation., • Assist with preconstruction tasks such as mark-out requests, job kick-offs, utility work packages, and permitting., • Capture and record data, including timesheets, crew locations, billing, as-built records, and materials., • Manage and schedule project activities, ensuring timely execution and monitoring., • Utilize productive reports from the project management system (View Point) for effective project implementation., • Collaborate with the project management team to resolve issues and ensure project completion., • Report on project costs monthly to ensure expenditure aligns with the project budget., • Engage in both office and fieldwork, providing hands-on support for underground transmission projects., • Participate in dynamic project kick-offs and utility work package development., • Attend and contribute to customer meetings, gaining exposure to client interactions and project negotiations., • Perform other duties as assigned.Essential Skills, • Bachelor's Degree in Engineering or Construction Management., • 1 – 3 years of experience in the Construction or Utility industries., • Proficient in MS Office for the purposes of project documentation and reporting., • Extensive expertise in Excel, data manipulation, and spreadsheet design to effectively communicate results.Additional Skills & Qualifications, • Project management skills., • Experience in construction and project coordination., • Ability to handle change orders and use AutoCAD., • Knowledge of construction management and commercial construction processes.Work Environment The position requires working in the office every day in the new office located in Garden City. The role involves a combination of both office and fieldwork, providing a dynamic and engaging work environment. The company is growing with numerous upcoming projects, offering a promising career path. Job Type & Location This is a Contract to Hire position based out of Hauppauge, NY. Pay and Benefits The pay range for this position is $35.00 - $42.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aston Carter: Aston Carter provides world-class corporate talent solutions to thousands of clients across the globe. Specialized in accounting, finance, human resources, talent acquisition, procurement, supply chain and select administrative professions, we extend the capabilities of industry-leading companies. We draw on our deep recruiting expertise and expansive network to meet the evolving needs of our clients and talent community with agility and excellence. With offices across the U.S., Canada, Asia Pacific and Europe, Aston Carter serves many of the Fortune 500. We are proud to be a ClearlyRated Best of Staffing® double diamond winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email for other accommodation options.

Job Description Embedded Design Engineer For over sixty years, the Orbit Electronics Group has designed and manufactured customized electronic subsystems and major components for military aircraft, shipboard, handheld, and ground-based programs, as well as designing hardware to support rugged non-military applications. Advanced in-house technologies, proven design expertise and diligent analysis of the relationships between human and machine enable the Orbit Electronics Group to deliver products that increase user productivity, reliability, and overall performance in mission-critical applications. Our products include Keyboards, Trackballs, Control Display Units, Flat Panel Displays, Integrated Switch Panels, Enhanced & Ruggedized LCDs, and more. Our goal is to ensure Total Customer Satisfaction by providing our customers with the best available equipment and service so they will recognize Orbit as the source for their Human Machine Interface (HMI) needs. Job Description This position primarily involves software/firmware and hardware design as part of the Orbit Electronics Group engineering team. The right candidate should be able to bring an embedded design from concept to completion. • Software/firmware and hardware design and implementation of embedded systems to use in Keyboards, Trackballs, Control Display Units, Flat Panel Displays, Integrated Switch Panels, Enhanced & Ruggedized LCDs, and more., • Use computer-assisted engineering and design software and equipment to perform assignments, applying principles and techniques of electrical engineering to accomplish goals., • Design of test software and test suite packages including selection of accompanying commercially available test equipment and design of non-standard test equipment., • Participation in preparation of specifications and documentation related to new and legacy designs., • Assist in troubleshooting of new and legacy embedded designs, which include a broad mix of communication protocols. Work with other members of the multi-disciplinary engineering team to bring designs to realization. Requirements, • US citizenship or permanent residency required, • Minimum of 2-years’ experience in an embedded systems or software design role, • Bachelor’s degree in Computer Engineering, Electrical Engineering, or a related field, • Experience in embedded software development, including firmware design and low-level programming, • Experience with Schematic Capture and PCB design tools is preferred, • Experience designing mixed-signal circuits (combining analog and digital components) is preferred, • Experience writing code in C or C++ is a plus, • Experience with Real Time Operating Systems is a plus, • Organized and detail oriented, • Good interpersonal skills, along with verbal and written communication skills, • Ability to work in both a team environment and independently Benefits • 401K, • Health Insurance, • Vision and Dental Insurance, • Paid Time off (Vacation, Holidays, sick leave etc.), • Flexible Spending Accounts, • Tuition Assistance, • End of year time off, • Opportunities for advancement Salary • $70,000 - $80,000 Depending on experience. Schedule

Job Description Job Summary East/West is seeking a highly motivated and dedicated Quality Engineer to join our team. We are open to candidates of all skill levels. As a Quality Engineer, you will be responsible for ensuring the highest level of quality of our products. You will work closely with cross-functional teams to identify and resolve quality issues, establish and implement quality standards, and continuously improve our quality management system. Essential Functions • Drive product nonconformance issues to closure via a zero-defect mindset and attitude., • Form and lead ad-hoc project teams in support of various business needs., • Develop, implement, and maintain quality control processes and procedures to ensure compliance with military, regulatory, and customer standards., • Lead root cause analysis and investigations of non-conforming material via utilization of standard root cause and corrective action processes to contain, disposition, and implement corrective and preventive actions., • Review and analyze defect data to identify trends and develop and initiate improvement strategies and tactics., • Collaborate with design and production teams to ensure that quality assurance considerations are incorporated into the design and manufacturing processes., • Works with Design and Manufacturing Engineering staff to support the planning of the manufacturing process for new product introduction using APQP., • Use analytical techniques to identify problems and create solutions., • Reviews shop work instruction templates to ensure conformity and accuracy in the production process, including verification points., • Undergraduate degree in an Engineering field (Mechanical preferred) or 5+ years requisite experience., • Minimum of 2+ years of experience in quality engineering, aerospace or military manufacturing industry preferred., • Knowledge of quality management systems, standards, and methodologies, such as ISO 9001, AS9100, and Six Sigma preferred., • Knowledge of APQP tools a plus (PFMEA, MSA, Control Plan, Process Flow Diagram)., • Experience with Quality Engineering tools such as Root Cause Analysis, Mistake Proofing, statistical sampling as well as Project Management skills a plus., • Knowledge of GD&T (Geometric Dimensioning & Tolerance) preferred., • Ability to approve production sequences according to the company's quality standards., • Ability to read, interpret, and approve complex engineering drawings and blueprints., • Knowledge of ERP system preferred., • Strong problem-solving and analytical skills., • Excellent communication and interpersonal skills., • Self-starter., • Proficiency in Microsoft Office applications., • Able to stand, walk, bend, and lift 50 lbs. East/West offers a generous benefits package, including but not limited to: • Medical, Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance FLSA Classification: Exempt Job Type: Full time EOE / Disability / Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job DescriptionA multi-discipline engineering firm with over 70 years in business is looking for a Senior Electrical Engineer for their Huntington, New York office! Responsibilities: • Design electrical systems (power distribution, stand-by power generation, lighting, communication, fire alarm, security systems), • Manage team of electrical engineers in a variety of project design and development tasks:, • drawings, • calculations, • cost estimates, • specifications, • client communication, • contractor submittal reviews, • Review design documents, • Ensure department adheres to QA/QC standards, • Assist with developing QA/QC standards, • Assist with business development initiatives, • Mentor/train junior staff Requirements: • B.S. degree in Electrical Engineering from an accredited program, • 5+ years of consulting experience (designing building power, lighting, communication and security systems), • Experience with HVAC and plumbing systems preferred, • PE License, • Extensive knowledge of the architectural/engineering industry (Federal, State, and local laws/regulations), • Experience using Outlook and Microsoft Office (or similar software), • LEED Accreditation, • Working knowledge of AutoCAD, Revit, and Easy Power preferred Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job DescriptionDescription: We are seeking a hands-on Automation & Controls Engineer to support, troubleshoot, and improve a wide range of manufacturing equipment in a regulated pharmaceutical environment. This role is ideal for mechanically inclined problem-solvers who enjoy being on the production floor, working directly with machines, controls, and electrical systems – not behind a desk. Job Type: Full-Time Location: Hauppauge, NY Works Hours: Monday – Friday, 8:00AM – 4:00PM Pay Range: $90,000 - $140,000 per year, depending on experience Start Date: ASAP What makes this role exciting: • A true automation playground – work hands-on with a wide variety of manufacturing equipment, controls platforms, and technologies in a complex pharmaceutical environment., • Real impact, real machines – you’ll diagnose, fix, and improve equipment that directly supports production, quality, and reliability – not abstract or purely digital systems., • High visibility & ownership – your expertise will be relied on across maintenance, engineering, and operations, with meaningful input into equipment improvements and upgrades., • Constant learning & challenge – no two days look the same; you’ll be exposed to diverse machinery, evolving technology, and new technical challenges. At CPC, you’ll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities: In this role, you will: • Troubleshoot and resolve PLC, electrical, and control system issues across a wide range of manufacturing equipment to minimize downtime and improve reliability., • Design, implement, and optimize machine control systems, including PLCs, HMIs, servos, and electrical components., • Own automation documentation and standards, maintaining current PLC/HMI programs, electrical drawings, and equipment documentation., • Collaborate closely with maintenance, engineering, and operations teams to execute repairs, improvements, change control, and equipment qualification., • Bachelor’s Degree in Electrical Engineering, Automation Engineering, or a related engineering discipline., • Mechanically curious and systems-oriented thinker, • Comfortable working directly on equipment in a production environment, • Enjoys variety, challenge, and continuous learning, • Practical, hands-on problem solver – not purely theoretical, • Hands-on experience with PLC, HMI, and servo systems (Allen-Bradley, Siemens, Mitsubishi), • Experience troubleshooting electrical control panels, sensors, drives, and actuators, • AutoCAD or similar electrical drafting experience preferred, • Working knowledge of OSHA and NEC requirements

Job DescriptionSenior Electrical Engineer – Analog & Digital Circuit Design | Power Electronics Expert We are seeking an experienced Senior Electrical Engineer with deep expertise in analog and digital circuit design and power electronics to join our engineering team. This role offers the opportunity to provide technical leadership across the complete product lifecycle—from initial requirements and architecture through production and sustainment—while working on cutting-edge harsh-environment applications. If you're passionate about innovative hardware design and thrive in a collaborative, technically challenging environment, this position is for you. Key Responsibilities • Lead technical initiatives throughout the full product lifecycle, including requirements definition, architecture development, design qualification, production support, and long-term sustainment, • Design, analyze, simulate, and verify innovative analog and digital hardware circuits for demanding harsh-environment applications, • Develop comprehensive design documentation, technical requirements, and deliver presentations at critical design reviews, • Balance and optimize complex engineering tradeoffs involving performance specifications, cost constraints, project schedules, and risk management, • Provide hands-on troubleshooting, technical analysis, and engineering support for manufacturing operations, supplier relationships, and legacy product lines, • Mentor junior and mid-level engineers, contribute to business development proposals, prepare cost estimates, and participate in technical hiring decisionsRequired Qualifications, • Bachelor's degree in Electrical Engineering (Master's degree strongly preferred), • Minimum 7-10 years of professional experience in analog circuit design and digital circuit design, including expertise in A/D conversion, processors, microcontrollers, I/O interfaces, and communication systems, • Proven background in power electronics design using MOSFET, IGBT, SiC, and GaN semiconductor devices, • Hands-on experience with DC/DC converters and regulatory compliance including MIL-STD-1275, MIL-STD-704, DO-160, and MIL-STD-461, • Advanced knowledge of critical engineering analyses: thermal analysis, electrical stress analysis, worst-case circuit analysis, tolerance analysis, aging analysis, FMEA, EMI/EMC, and radiation effects (SEU, TID), • Demonstrated proficiency in printed wiring board (PWB) layout for high-power, high-voltage, and EMI-compliant circuit designs, • Strong understanding of communication protocols including CAN bus, RS-232/422/485, SPI, JTAG, PCI/PCIe, and 1G/10G Ethernet, • Experience with motor control systems, control theory, Z-domain analysis, Clark and Park transforms, and sensor interfaces (LVDT, resolvers, encoders), • Join a well-established, stable company with a proven track record of success and innovation, • Work on a diverse product portfolio serving multiple industries and customers across various sectors, • Engage with advanced technologies and tackle challenging engineering problems in harsh-environment applications, • Collaborate within a supportive, professional work environment that values technical excellence and continuous improvement, • Receive a comprehensive benefits package designed to support your health, financial security, and work-life balance

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Data is pivotal to our goal of frequent launch and rapid iteration. We’re recruiting a Data Engineer at iRocket to build pipelines, analytics, and tools that support propulsion test, launch operations, manufacturing, and vehicle performance. The Role • Design and build data pipelines for test stands, manufacturing machines, launch telemetry, and operations systems., • Develop dashboards, real-time monitoring, data-driven anomaly detection, performance trending, and predictive maintenance tools., • Work with engineers across propulsion, manufacturing, and operations to translate data-needs into data-products., • Maintain data architecture, ETL processes, cloud/edge-data systems, and analytics tooling., • Bachelor’s degree in Computer Science, Data Engineering, or related technical field., • 2+ years of experience building data pipelines, ETL/ELT workflows, and analytics systems., • Proficient in Python, SQL, cloud data platforms (AWS, GCP, Azure), streaming/real-time analytics, and dashboarding (e.g., Tableau, PowerBI)., • Strong ability to work cross-functionally and deliver data-products to engineering and operations teams., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionDescription: An HVAC Controls Engineer is responsible for providing hands-on controls and electrical engineering support to correct, repair, and improve HVAC equipment and systems company-wide. Requirements: Essential Job Functions: • Troubleshoot and repair PLC, VFD and control related issues, • Design and implement system changes, updates and improvements, including creating new control systems, • Draft new electrical drawings and modify existing electrical drawings, • Organize and maintain latest machine programs, BMS programs, electrical drawings, and user manuals, • Communicate and work with maintenance and engineering personnel to resolve issues in a timely manner, • Procure parts and materials required for machine and system maintenance., • Assist in initiation of change control if new parts deviate from original specifications., • Assist in qualification of equipment, • Supervise, mentor, advise technicians to ensure machine repairs and operations are conducted in a safe, responsible manner, • Execute engineering support and maintenance to meet all requirements and yield a greater than 90% first time right., • Keep current and implement technology to enhance operation performance, • Act as role model exemplifying superb ethical conduct and decision making, teamwork, integrity, agility, respect and accountability., • Bachelor’s Degree in Electrical Engineering or equivalent hands-on experience, • Knowledge of controls software including BMS systems, • Knowledge of drafting software (AutoCAD) preferred, • Knowledge of OSHA and NEC code requirements, • Ability to follow company policies and procedures, including all SOPs, • Computer skills must include Microsoft Office, Word and Outlook, • May be required to lift up to 50 lbs, climb ladders, use tools, and manipulate machine parts., • Required to use hands to use computer controls, demonstrate equipment usage, etc., • Required to be present in-house to provide daily engineering support to multiple departments and management including VPs, directors, managers and to collaborate / mentor other personnel as required., • Responsible for compliance with all rules and regulations pertaining to safety policies and for leading by example with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel., • Work environment in production operations facilities include close proximity to heavy machinery and pharmaceutical powders, • Potential to move between production operations sites/areas to complete job functions., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion, • Indoor manufacturing environment including enclosed areas with dust and loud noises., • Responsible for compliance with all rules and regulations pertaining to safety policies and for leading by example with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel, • For exempt employees, casual or incidental overtime worked is not compensable. When these extra efforts are either infrequent or of short duration, it is expected that exempt Employees will consider these extra hours per day, part of their professional employee/Company relationship and extend their efforts without additional compensation. Supervisory Responsibilities: • As needed

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Job Summary The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate is an entry level candidate with up to 3 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities may include, but are not limited to: • Preparation of trip generation estimates, roadway volume development, parking estimates, and analyses for their projects within the team., • Assisting in the analysis of field data, reports, maps, drawings, blueprints, tests, and aerial photographs to plan projects., • Obtaining, analyzing, and interpreting demographic and other regional transportation planning data., • Use of computer-assisted engineering and design software and equipment to prepare engineering and planning documents., • Assisting in the preparation or modification of planning documents, including transportation impact studies, and traffic operational analyses, for projects., • Assisting in the collection of field data., • Serving as onsite project representative., • Use of planning software and equipment to prepare engineering, design, and planning documents., • Responsible for job-specific quality system tasks as defined in the quality manual or handbook., • Responsible for other general office duties as may be assigned., • Collaborate with engineering and design teams to develop conceptual layouts for transportation improvements, including roadway access, pedestrian and multimodal facilities., • Prepare high-level design sketches, diagrams, and visualizations to support proposals, stakeholder presentations, and client deliverables. Job Requirements: • Bachelor’s Degree in Engineering, • Engineer in Training Certification Preferred, • Experience utilizing any or all of the following: Synchro, SimTraffic, Excel, AutoCAD/MicroStation (preferred but not required), • Aptitude for detail-oriented work assignments, • Excellent oral and written communication skills, • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description A multi-discipline consulting firm is seeking a Project Wastewater Engineer for their growing team in Huntington, New York! Responsibilities: • Perform various engineering tasks including wastewater collection, conveyance, and treatment processes, • Lead engineering evaluations, • Prepare design calculations, reports, plans and specifications, • Perform construction administrative tasks (construction phase management activities, coordinate shop drawing reviews, RFI responses, develop construction change orders), • Communicate directly with clients, • Confirm accuracy of plans/specifications, • Perform field activities (site investigations, witness testing and milestone construction observation), • Supervise/manage junior staff, • Assist with business development (write technical proposals/assist with budgeting), • Lead pursuit of small to moderate size projects Requirements: • BS in Engineering (Civil, Environmental, Chemical or Mechanical), • 5+ experience in design of wastewater treatment plants, collection and conveyance systems, and alternative onsite treatment systems, • PE License or ability to obtain in six months, • Microsoft Office Suite experience (Word, Excel, Access, Teams, Outlook), • Knowledge of Autodesk Revit and Civil 3D software Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job DescriptionDescription: We are seeking a Serialization Engineer to join our Operations team, where you’ll play a key role in supporting serialized packaging operations and technical packaging solutions across pharmaceutical products. In this hands-on, cross-functional role, you’ll work closely with Packaging, Quality, Engineering, and project teams to ensure efficient, compliant, and accurate packaging operations from inception through commercial launch. This is an excellent opportunity for someone who enjoys solving technical challenges, learning new serialization technologies, and contributing directly to high-quality pharmaceutical packaging processes. Job Type: Full-Time Location: Hauppauge, NY Works Hours: Monday – Friday, 9:00AM – 5:00PM Pay Range: $75,000 - $100,000 per year, depending on experience Start Date: ASAP What makes this role exciting: • Hands-on with cutting-edge serialization technology – work directly with Optel Linemaster, Pharmaproof, and other packaging automation systems., • Learn and grow in a fast-paced pharmaceutical environment – gain exposure to packaging design, commissioning, validation, and regulatory compliance., • Cross-functional experience – collaborate with Engineering, Quality, Project Management, and technical teams to see projects from concept to commercial launch. At CPC, you’ll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities In this role, you will: • Support serialized packaging projects from start to launch by assisting in equipment commissioning, validation, and process optimization for new and existing packaging configurations., • Conduct line trials, studies, and assessments to determine critical process parameters (CPP) and ensure consistent, compliant packaging operations., • Administer serialization operations including serial number management, master recipe creation, EPCIS updates, and shipment event notifications., • Collaborate cross-functionally with Packaging, Engineering, Quality, Project Management, and Business Development teams to solve technical challenges and implement process improvements., • Bachelor’s degree in Packaging Engineering, Mechanical Engineering, Manufacturing Engineering, or a related technical discipline required, • Minimum 3 years of relevant experience in engineering, packaging or serialization roles, preferably in a pharmaceutical environment, • Hands-on experience with packaging equipment, line trials, and process validation strongly preferred, • Knowledge of Pharmaceutical Serialization and Aggregation systems and DSCSA guidelines, • Familiarity with FDA, cGMP, and 21 CFR Part 210, 211, and Part 11, • Strong technical writing and documentation skills, • Hands-on knowledge of packaging equipment setup, operation, and maintenance, • Ability to read and develop engineering drawings, P&IDs, and technical documentation, • Strong problem-solving skills and ability to work in cross-functional teams

Job Description RouteSmart Technologies, a leader in vehicle route optimization software technology, is seeking a Cloud Engineer to join our Technology & Security Department. This role will report directly to the Director of Technology & Security and is responsible for implementing, maintaining, and improving our cloud IT infrastructure, systems, and AWS environments. The Cloud Engineer will work closely with the DevOps and Product Development teams to ensure secure, scalable, and efficient cloud operations across our production and development environments. The typical base pay range for this position at the start of employment is expected to be between $120,000–$130,000 per year. RouteSmart Technologies, Inc. has different base pay ranges for different work locations within the U.S., and base pay will vary based on experience. This is a hybrid role; candidates must be able to commute to the office in Melville, NY or Columbia, MD. Candidates must reside within 50 miles and be available to work onsite several days per week. However, we will consider the right candidate for remote work if domiciled in one of the following states: Maryland, New York, Pennsylvania, DC, Virginia, Arizona, California, Colorado, Florida, Idaho, Illinois, Indiana, Minnesota, New Jersey, North Carolina, Oregon, South Carolina, Texas, Washington. Essential Duties & Responsibilities • Assist in researching, designing, and implementing secure, scalable, and cost-effective IT infrastructure, systems, security components, standards, and services., • Maintain, troubleshoot, and resolve issues related to infrastructure, systems, services, security, and accounts., • Continuously monitor the health and performance of the AWS infrastructure, systems, and accounts, identifying issues and implementing solutions for improved efficiency., • Analyze components, logs, services, and specific tools as needed., • Implement, enforce, and configure security policies, controls, services, identity management, and other security measures to protect from unauthorized access and cyber threats., • Stay up-to-date on technology trends and best practices, adapting to evolving cloud IT technologies and management approaches., • Communicate effectively and create accurate documentation of designs, configurations, processes, and procedures., • Collaborate closely with other team members on projects and tasks, ensuring seamless integration and support for IT initiatives., • 5+ years of experience with cloud infrastructure, systems, and security., • Minimum of 3 years of hands-on experience with AWS services., • Strong communication and collaboration skills., • Highly organized with strong analytical and problem-solving abilities., • Ability to work independently and as part of a team., • Commitment to continuous learning and delivering high-quality service. Education & Experience • Bachelor’s degree in Computer Science, Information Systems, Business Technology, or a related field—or equivalent experience., • Proficiency in IT infrastructure, networking, system administration, and security., • Solid experience with AWS services and concepts., • Experience with Infrastructure as Code (IaC) tools such as AWS CloudFormation or Terraform. RouteSmart offers its employees numerous opportunities for professional development. Our goal is to provide our employees the chance to learn and grow as the company grows. We recognize that our employees are our most valuable asset. The work they do is key to our ability to provide high quality service to our clients. We also recognize that our employees are unique individuals with their own lifestyle and interests. RouteSmart Technologies pays a significant share of the cost of benefits for our employees. We believe our investment makes good business sense by helping to create a positive and productive work environment. Among the benefits we offer are: • Medical/Dental/Vision/STD & LTD Plans, • Employer paid Life Insurance Plan, • Employee Training & Development, • 401(k) Retirement Savings Plan w/ Employer Match, • Vacation/Sick/Holiday Leave, • Tuition Reimbursement, • Flex hours, • Casual Dress RouteSmart Technologies is proud to be an equal opportunity workplace. Individuals seeking employment at RouteSmart Technologies are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. We do not accept resumes from headhunters, placement agencies, or other suppliers that have not signed a formal agreement with us. All candidates must have legal authorization to permanently live and work in the United States. This position does not qualify for sponsorship.

Job Description iRocket is engineering fully reusable, fully autonomous small launch vehicles to enable responsive, cost-effective, and sustainable access to space. Our team is building both the space hardware and the ground / facility infrastructure needed to support frequent launches and mission operations. We are seeking an IT Specialist/Systems Administrator to support and grow our internal systems, networks, and infrastructure. This role will be key in ensuring reliable, secure, and scalable IT operations across the company. The Role • Maintain, support, and monitor internal IT systems (servers, workstations, network, cloud services, backups), • Plan and implement infrastructure upgrades, patches, and system improvements, • Administer identity and access management, permissions, and directory services, • Troubleshoot hardware, software, and network issues; provide helpdesk support, • Ensure cybersecurity best practices, security monitoring, and incident response, • Document IT architecture, policies, procedures, and system configurations, • Coordinate with external vendors, service providers, and contractors, • Support onboarding/offboarding of employees with IT provisioning Requirements • Bachelor’s degree in Information Technology, Computer Science or related field (or equivalent experience), • 3+ years of experience as a systems administrator, IT engineer, or similar role, • Experience managing Windows, macOS, and Linux environments, • Hands-on experience with networking (firewalls, VPN, switches, routing), • Familiarity with cloud platforms (AWS, Azure, GCP) and hybrid infrastructure, • Strong security mindset: experience with endpoint security, access controls, monitoring tools, • Ability to document, communicate, and collaborate with technical and non-technical stakeholders, • Proven ability to multitask, respond to urgent issues, and work in a fast-paced environment Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Company Description Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world's most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Job Description AECOM is seeking qualified candidates for the position of Office Engineer (OE) on highway bridge related CM projects on Long Island in Suffolk County. The Office Engineer acts as the organizational and administrative backbone of a construction management project. The role involves extensive documentation, tracking payments and materials, and coordinating communications between the field and various project stakeholders. This position will be located in the field office of the project to which the OE is assigned and will be supervised by a Resident Engineer. * Follow NYSDOT MURK to set up and maintain comprehensive project record-keeping and filing systems, including all paperwork and correspondence * Initiate, review, and track change orders and requests for information (RFIs) * Process progress estimates for contractor payments. This often includes using NYSDOT-specific software, such as AASHTO Site Manager or similar payment processing software. * Assist with project and office start-up and the closeout process, which may include resolving claims. * Serve as a liaison between the contractor, the CM Team and the client Agency * Record and distribute minutes from project progress meetings. * Review and track the status of submissions and correspondence with contractors and subcontractors, in compliance with NYSDOT Standard Specifications and material approved lists * Schedule and document material testing * Review daily work reports from field inspectors for accuracy and compliance * Track civil rights goals and requirements on EBO and ensure that contractor payroll and other required paperwork comply with EEO and trainee requirements * tracking quantities of completed work and sometimes visiting the site to verify conditions * Track project incident reporting and collect weekly toolboxes from contractors. * Coordinate lane closure requests Qualifications Minimum Requirements: * Bachelor's Degree plus 4 years of related experience or demonstrated equivalency of experience and/or education * Due to the projects associated with this position a US Citizenship is required * Highway/Bridge Experience Preferred Qualifications: * Experience with New York State Department of Transportation (NYSDOT) and/or Suffolk County Department of Public Works policies and procedures, as well as familiarity with federally funded projects, is preferred. * Excellent written communications and presentation abilities in internal project settings with, the senior management team, external project stakeholders including senior client management leadership * Software proficiency in Procore, SharePoint, MS Project * Microsoft Office, CEES and EBO software, as well as MURK, Federal Aid policies and procedures and the NYS LPM (formally PLAFAP) Manual Additional Information Sponsorship for US employment authorization is not available now or in the future for this position Relocation is not available for this position Offered rate of compensation will be based on individual education, qualifications, experience, and work location. The range for this position is $90000 to $130000. About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle - from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you'll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you've always envisioned. Here, you'll find a welcoming workplace built on respect, collaboration and community-where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines. ReqID: J10138546 Business Line: Transportation Business Group: DCS Strategic Business Unit: East Career Area: Administration Work Location Model: On-Site Compensation: USD 90000 - USD 130000 - yearly

Job Description iRocket is engineering fully reusable, fully autonomous small launch vehicles to enable responsive, cost-effective, and sustainable access to space. Our team is building the infrastructure—both in orbit and on the ground—needed to support frequent launches and mission operations. The Role: We are seeking a Construction Project Engineer to lead and support the development of iRocket’s factory, test, and facility infrastructure. This role will play a key role enabling our production and test operations by implementing facility projects, collaborating with contractors, and coordinating with internal stakeholders. • Support all aspects of project implementation from planning through execution, • Create scopes of work, obtain competitive bids, and oversee contractor selection, • Conduct job walk-downs and interface with vendors, engineers, and internal teams, • Review technical plans, drawings, and specifications to ensure alignment with project goals, • Monitor project schedule, budget, and deliverables, • Respond to scope, schedule, or deliverable questions from stakeholders, • Manage and maintain all project documentation (RFIs, submittals, change orders, etc.), • Bachelor’s degree in Engineering, Construction Management, Architecture, or related field, • Ability to read and interpret technical drawings, plans, and specifications, • Experience in facilities, infrastructure, or industrial construction in aerospace or high-reliability sectors, • Strong computer and software skills (project scheduling, documentation, collaboration tools), • Excellent verbal and written communication skills with internal teams, vendors, and contractors, • Aptitude for problem-solving, balancing scope, cost, and schedule Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Familiarity with data science and ML workflows (feature engineering, experimentation, model training/deployment, RAG pipeline development, prompt engineering) and tools/languages such as Python, Spark, notebooks, and ML frameworks (e. Sales Engineer, Solutions Architect, Data Engineer, Analytics Con

Data Engineer Job Summary: Talent Software Services is in search of a Data Engineer for a contract position that can be worked 100% remotely. Position Summary: The Data Engineer is responsible for designing, building, and maintaining scalable data pipelines and systems that deliver trusted data for

A leading AI data company is seeking a Forward Deployed Engineer to drive impactful solutions in the advancement of AI.

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related engineering or science field and a

Subject to eligibility requirements and successful ID verification.

Delivering with Uber is an alternative to a part-time or full-time job and can get you earning cash quickly.Delivering with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can cash