Trabajos routine en New Brunswick, New JerseyCrear alertas

Job Title: Surgical Technician Location: Main Hospital - New Brunswick Department Name: Peds Operating Room Req #: 0000258312 Status: Hourly Shift: Evening Pay Range: $35.05 - $42.97 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Surgical Technician – RWJBarnabas Health At RWJBarnabas Health, Surgical Technicians become part of a highly collaborative perioperative team where precision, teamwork, and patient-centered care support exceptional surgical outcomes. This Surgical Technician role is located at our Bristol Meyers Squibb Pediatric Level 1 Trauma Center, and offers opportunities for professional growth, advanced clinical experience, and a culture committed to safety, innovation, and continuous improvement. As a Surgical Technician, you will play an essential role in preparing the operating room, supporting surgeons and perioperative nurses during procedures, and helping ensure every patient receives safe, efficient, and high-quality surgical care. Joining RWJBarnabas Health means joining a community where every Surgical Technician is encouraged to grow, contribute, and make a meaningful impact. A typical day for a Surgical Technician may include: • Preparing operating rooms by ensuring surgical instruments, equipment, and sterile supplies are organized, available, and ready for scheduled procedures, • Collaborating with the perioperative registered nurse to provide individualized, age-appropriate care for patients throughout the surgical experience, • Maintaining a sterile field and adhering to infection prevention, aseptic technique, and organizational policies to promote safe surgical outcomes, • Anticipating the surgeon’s instrumentation and equipment needs during procedures while responding efficiently to changes in surgical conditions, • Assisting the surgical team during routine and complex procedures by handling instruments, supplies, and equipment with precision and attention to detail, • Monitoring the surgical environment to help ensure patients' physiologic responses remain appropriate throughout the perioperative experience, • Supporting a safe operating room environment by following established risk reduction practices, including fire prevention protocols and safety procedures related to laser and electrosurgical equipment, • Collaborating closely with surgeons, anesthesia providers, registered nurses, and other members of the perioperative team to deliver coordinated, patient-centered care, • Maintaining accurate preparation, organization, and turnover of surgical equipment to promote efficient workflow and readiness between procedures, • Participating in departmental education, orientation, competency validation, and quality improvement initiatives that support ongoing clinical excellence This role might be for you if: • You thrive in a fast-paced surgical environment where organization and attention to detail are essential, • You remain calm, adaptable, and focused during complex or changing surgical procedures, • Strong teamwork and communication skills help you collaborate effectively with surgeons, nurses, anesthesia providers, and other perioperative professionals, • You anticipate the needs of the surgical team and take pride in supporting efficient, high-quality surgical care, • Patient safety, sterile technique, and quality outcomes guide your daily work, • You value accountability, professionalism, and continuous learning in your clinical practice, • You enjoy contributing to a collaborative culture focused on delivering exceptional patient care To be considered for this Surgical Technician opportunity, you are passionate about supporting safe, high-quality surgical care through technical expertise and collaborative teamwork. You have successfully completed a nationally or regionally accredited Surgical Technology program or hold and maintain a Certified Surgical Technologist (CST) credential through the National Board of Surgical Technology and Surgical Assisting (NBSTSA) or another nationally recognized credentialing organization. Current American Heart Association Basic Life Support (BLS) certification is required, along with successful completion of departmental orientation and competency requirements. You are committed to maintaining the highest standards of patient safety, surgical excellence, and professional practice while contributing to an outstanding perioperative team. Full-time availability for evening shift 11:00 AM to 9:30 PM (4x10 hour shifts) is required.

Job Description Diesel Mechanic Job Description We are looking for a skilled Diesel Mechanic to join our team at Pinto Brothers Disposal. As a Diesel Mechanic, you will be responsible for performing maintenance and repairs on our fleet of diesel-powered vehicles, including garbage trucks and other heavy equipment. Perform inspection, diagnosis, preventative maintenance, repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment this includes diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call, and required to assist with emergency breakdowns. Responsibilities: • · Diagnose and repair mechanical, electrical, and hydraulic systems on diesel-powered vehicles and equipment., • · Perform routine maintenance, including oil changes, tire rotations, and brake inspections., • · Use diagnostic tools and software to identify and troubleshoot problems., • · Communicate with the operations team to ensure vehicles are serviced and maintained according to schedule., • · Maintain accurate records of work performed and parts used., • · Keep a clean and safe work area. Requirements: • · Applicants must be at least 18 years of age and legally eligible to work in the United States., • · A valid driver’s license is required. CDL plus not required, • · Experience working on heavy duty diesel equipment OR training from a recognized trade school is required., • · Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • · Must be able to meet the physical and safety requirements of the position., • · Must be able to provide own tools, • · 2+ year’s experience working as a heavy duty Diesel Mechanic, • · Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • · Working knowledge of applicable DOT and OSHA standards and regulations., • · Strong knowledge of diesel engine repair and maintenance., • · Must be able to lift up to 50 pounds and perform physical labor. Frequent squatting and standing is required. If you are a skilled Diesel Mechanic who is looking for a challenging and rewarding opportunity, we encourage you to apply for this position. We offer competitive pay, benefits, and a supportive work environment. To apply, please submit your resume and a cover letter outlining your experience and qualifications. Pinto Brothers Disposal \nCompany Description Pinto Brothers Disposal is a family owned and operated solid waste company established in 1980. We are a Central Jersey company that has been servicing Middlesex and Somerset Counties for over 40 years. We pride ourselves of giving all our customers dependable and professional disposal service. We serve and interact with homeowners, business, corporations, townships, Boards of Education, and management companies to help with their garbage and recycling needs. Pinto Brothers Disposal is a family owned and operated solid waste company established in 1980. We are a Central Jersey company that has been servicing Middlesex and Somerset Counties for over 40 years. We pride ourselves of giving all our customers dependable and professional disposal service. We serve and interact with homeowners, business, corporations, townships, Boards of Education, and management companies to help with their garbage and recycling needs.

Job Description Why VCI: At VCI, we're dedicated to supporting the emergency responders who serve our communities every day. What sets us apart is our commitment to both our customers and our employees. We offer competitive pay, a 401(k) retirement plan, comprehensive benefits including medical, dental, and vision coverage, paid Holidays and the opportunity to work alongside a team of nearly 100 professionals. Our team includes former and current fire chiefs, EMTs, paramedics, police officers, firefighters, rescue personnel, and skilled industry experts, all working together in state-of-the-art facilities to ensure emergency vehicles remain mission-ready. When you join VCI, you become part of an organization that values teamwork, professionalism, and taking care of its people. Primary Function: This position is responsible for performing the basic diagnostic, repair, and maintenance of light duty trucks or emergency vehicles. Key Responsibilities • Perform basic, routine maintenance, diagnostics, and repairs on light-duty trucks and emergency vehicles., • Assist with the installation and service mechanical systems, suspension components and drivetrains., • Inspect, troubleshoot and repair engine performance, brakes, cooling systems, ignition systems, hydraulic and electrical systems., • Maintain and repair new vehicle set up, • Responsible for maintaining shop equipment and a clean and safe work area, • Ensure all work complies with DOT, NFPA, and other regulatory guidelines as required., • Maintain accurate service records and follow company and industry safety standards., • Manage and report time on tasks., • Wash, clean and prep new vehicles for service., • All other duties as assigned. Requirements: • Applicants must have their own tools and a valid state license., • Basic knowledge of automotive mechanical systems, diagnostics and repair., • Ensure all work complies with Triple KKK standards., • Strong problem-solving skills and the ability to work in a fast-paced environment a plus. Experience: High School Diploma or GED and at least 1 year of experience in an electrical automotive environment or equivalent experience. Knowledge of basic repair disciplines and have the willingness to learn new systems as they relate to emergency vehicles. Driver’s license CDL B with air brake and bus endorsement a plus.

Job Description Diesel Mechanic Sayreville, NJ Job Type: Full-time Pay: Competitive salary (based on experience) Job Description: A reputable construction company based in Sayreville, NJ is looking for an experienced Diesel Mechanic to join our team. This role involves maintaining and repairing diesel-powered equipment to ensure safe and efficient operation across our job sites. Responsibilities: • Inspect, diagnose, and repair diesel engines and heavy construction equipment, • Perform routine maintenance and preventative service, • Troubleshoot mechanical, hydraulic, and electrical issues, • Maintain accurate service records, • Ensure equipment meets safety and operational standards Qualifications: • Minimum 3+ years of diesel mechanic experience (construction equipment preferred), • Strong knowledge of diesel engines, hydraulics, and electrical systems, • Ability to work independently and efficiently, • Valid driver’s license (CDL is a plus), • Own tools preferred Benefits: • Competitive pay based on experience, • Overtime opportunities, • Stable, year-round work, • Opportunity for growth within the company Schedule: • Monday to Friday, • Overtime available Work Location: In person – Sayreville, NJ How to Apply: Submit your resume and a brief summary of your experience. Qualified candidates will be contacted for an interview.

Job DescriptionCarvana Diesel Technician: Join Our Fleet Maintenance Team! Join our rapidly growing team at Carvana, where we're revolutionizing the car buying experience! We're seeking a skilled and dedicated Diesel Technician to join our innovative Fleet Maintenance team. If you're a problem-solver who enjoys working on Class 8 trucks and trailers and is passionate about vehicle uptime, we want to hear from you. Why You'll Love Working Here We're proud to offer our team members a supportive, collaborative environment and outstanding benefits. • Competitive Pay & Benefits:, • Competitive hourly compensation and overtime opportunities, • Comprehensive medical, dental, and vision coverage, • Matching 401k, • PTO: Accrue 104 hours in your first year!, • Tool Allowance: Receive a $500 annual tool allowance to keep your equipment up-to-date., • Boot Allowance: Get a $100 boot allowance every 6 months to ensure you have the right gear., • Investments in Your Future:, • ASE certification reimbursement (we cover the cost!), • Tuition reimbursement and student loan repayment programs, • Opportunities for growth and advancement within a rapidly expanding company, • Internal training, including classroom time for DTNA ARC Certification, • Unique Perks:, • Carvana employee discount on vehicle purchases, • Pet benefits and much more! $2000-$4000 Sign on Bonus! A Day in the Life: What You'll Be Doing As a Diesel Technician, you'll be a key part of our Fleet Maintenance team, ensuring our Class 8 fleet is safe and reliable. Our fleet is primarily day cabs and trailers, all under manufacturer warranty—meaning no major engine overhauls or roadside calls. You'll perform a variety of tasks, with clear pathways for growth: • Routine Maintenance & Repair: Perform preventative maintenance, inspections, and component replacements on our fleet., • Diagnostics: Utilize diagnostic tools and software to troubleshoot complex electrical, engine, and transmission problems., • System Repairs: Address issues with aftertreatment systems (DEF/emissions), perform regens, and change filters., • Collaborate & Optimize: Work with your team to maintain accurate records, optimize vehicle performance, and minimize downtime., • Safety First: Adhere to all safety protocols and industry best practices to ensure our fleet is always DOT compliant.What We're Looking For We're searching for skilled professionals with a strong background in diesel technology. • Experience: 3+ years of experience with Heavy-Duty Class 8 trucks and trailers or similar equipment (e.g., agricultural, construction, waste collection truck)., • Technical Skills:, • Strong diagnostic and troubleshooting skills for diesel engines, transmissions, and vehicle systems., • Proficiency with diagnostic software and using a laptop for manuals., • Experience with aftertreatment systems and electrical diagnostics., • Comfortable with MIG welding is a plus., • Certifications & Training:, • A minimum of two ASE Certifications within the first 6 months of employment (we'll reimburse you!)., • T-series ASE Certifications are highly valued., • Requirements:, • A valid Driver's License with clean driving record, • Ability to perform physical tasks associated with vehicle maintenance (lifting, bending, etc.)., • Strong attention to detail and a commitment to quality workmanship., • A solid attendance record and punctuality are essential for this role.About Carvana At Carvana, we're on a mission to change the way people buy cars. We're a technology company bringing transparency and convenience to the car buying process. We believe in putting the customer first and fostering a culture of innovation and collaboration. Our team members are our greatest asset, and we're committed to providing a workplace where everyone can thrive. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check and drug test. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description We are looking for a Diesel Mechanic to join our team! You will be responsible for repairing various vehicles and transmission systems. Responsibilities: • Repair trucks,, • Perform routine vehicle maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections prior to returning the vehicle to the driver Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environment\nCompany Description family owned and operated fast growing trucking and construction company family owned and operated fast growing trucking and construction company

Job DescriptionCarvana Diesel Technician: Join Our Fleet Maintenance Team! Join our rapidly growing team at Carvana, where we're revolutionizing the car buying experience! We're seeking a skilled and dedicated Diesel Technician to join our innovative Fleet Maintenance team. If you're a problem-solver who enjoys working on Class 8 trucks and trailers and is passionate about vehicle uptime, we want to hear from you. Why You'll Love Working Here We're proud to offer our team members a supportive, collaborative environment and outstanding benefits. • Competitive Pay & Benefits:, • Competitive hourly compensation and overtime opportunities, • Comprehensive medical, dental, and vision coverage, • Matching 401k, • PTO: Accrue 104 hours in your first year!, • Tool Allowance: Receive a $500 annual tool allowance to keep your equipment up-to-date., • Boot Allowance: Get a $100 boot allowance every 6 months to ensure you have the right gear., • Investments in Your Future:, • ASE certification reimbursement (we cover the cost!), • Tuition reimbursement and student loan repayment programs, • Opportunities for growth and advancement within a rapidly expanding company, • Internal training, including classroom time for DTNA ARC Certification, • Unique Perks:, • Carvana employee discount on vehicle purchases, • Pet benefits and much more! $2000-$4000 Sign on Bonus! A Day in the Life: What You'll Be Doing As a Diesel Technician, you'll be a key part of our Fleet Maintenance team, ensuring our Class 8 fleet is safe and reliable. Our fleet is primarily day cabs and trailers, all under manufacturer warranty—meaning no major engine overhauls or roadside calls. You'll perform a variety of tasks, with clear pathways for growth: • Routine Maintenance & Repair: Perform preventative maintenance, inspections, and component replacements on our fleet., • Diagnostics: Utilize diagnostic tools and software to troubleshoot complex electrical, engine, and transmission problems., • System Repairs: Address issues with aftertreatment systems (DEF/emissions), perform regens, and change filters., • Collaborate & Optimize: Work with your team to maintain accurate records, optimize vehicle performance, and minimize downtime., • Safety First: Adhere to all safety protocols and industry best practices to ensure our fleet is always DOT compliant.What We're Looking For We're searching for skilled professionals with a strong background in diesel technology. • Experience: 3+ years of experience with Heavy-Duty Class 8 trucks and trailers or similar equipment (e.g., agricultural, construction, waste collection truck)., • Technical Skills:, • Strong diagnostic and troubleshooting skills for diesel engines, transmissions, and vehicle systems., • Proficiency with diagnostic software and using a laptop for manuals., • Experience with aftertreatment systems and electrical diagnostics., • Comfortable with MIG welding is a plus., • Certifications & Training:, • A minimum of two ASE Certifications within the first 6 months of employment (we'll reimburse you!)., • T-series ASE Certifications are highly valued., • Requirements:, • A valid Driver's License with clean driving record, • Ability to perform physical tasks associated with vehicle maintenance (lifting, bending, etc.)., • Strong attention to detail and a commitment to quality workmanship., • A solid attendance record and punctuality are essential for this role.About Carvana At Carvana, we're on a mission to change the way people buy cars. We're a technology company bringing transparency and convenience to the car buying process. We believe in putting the customer first and fostering a culture of innovation and collaboration. Our team members are our greatest asset, and we're committed to providing a workplace where everyone can thrive. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check and drug test. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job DescriptionNJ-Based client is a global leader in solutions and services across the packaging lifecycle, providing large and small metal, plastic, fiber and hybrid packaging worldwide to companies in industries from food, beverage, personal care and pharmaceuticals to chemicals, petrochemicals, agrochemicals and paints – is seeking an Industrial Electrician: 2-on Day Shift and 1-Overnight.Position Summary: Industrial Electrician:Repairs and maintains plastic molding machinery and electro-mechanical equipment such as motors, pneumatic tools, hydraulics, conveyor systems, electrical devices and production machines and equipment. Uses hand tools, power tools, and precision measuring and electrical testing equipment. Read blueprints, schematics, diagrams, and PLC troubleshooting.Shift: Industrial Electrician: • Overnight Shift: 8:00 pm – 8:00 am - (1 opening), • 3 Days on – 2 Days off – 2 Days on and 3 Days off, • (36 hours one week, 48 hours the next. Able to work alternating weekends and work overtime when needed), • Day Shift: 7:00 am - 3:30 pm (flexible to possible changes in day shift schedule) (2 openings), • The overnight opportunity has a shift differential pay ($1.00 for regular hours and .64 cents for overtime hours)., • Hourly Pay rate: $34.76/hourResponsibilities: Industrial Electrician:, • Perform routine preventive maintenance checks on all production equipment and machinery., • Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment., • Observes and listens to mechanical devices in operation to locate causes of trouble., • Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections., • Inspects used parts to determine changes in dimensional requirements., • Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices., • Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance., • Required to participate in on-call program and may be required to work additional hours as required., • Follows all safety rules and procedures and observes the operations to insure a safe environment.Job Knowledge, Skills, and Abilities: Industrial Electrician:, • Machine set- up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed., • Must have strong PLC troubleshooting capability and ability to read and program code., • Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air conditioning related control systems., • Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment., • Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner., • Must be able to work to repair equipment back to service during emergency breakdowns.Competencies: Industrial Electrician:, • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form.Requirements: Industrial Electrician:, • High school diploma or general education degree (GED); plus, one-year related experience and/or training; or equivalent combination of training an experience., • Full and complete understanding of hydraulics, pneumatics, electricity, and PLC troubleshooting., • Prefer Electrician's License, but not mandatory.Physical Demands: Industrial Electrician:, • Be able to work 12-hour shifts, 8a-8p or 8p-8am, rotating: 36 hours one week, 48 hours the next. Ability to work overtime when needed., • While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel., • The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.Work Environment: Industrial Electrician:, • While performing the duties of this job, the employee is regularly exposed to moving mechanical parts., • The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration., • The noise level in the work environment is medium to loud.

Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. Opportunity summary: As Warehouse Operator you are responsible for all phases of assembling materials for customer orders, receiving new and returned products, and maintaining safety and quality standards within the warehouse. How you will impact Smurfit Westrock Packaging Solutions: • Moving controls, devices, and levers to drive forklifts; transfer materials, unloading, processing, loading and storage areas., • Move outgoing product using hand truck, forklift, or other material handling equipment, in accordance with all safety policies, to loading dock., • Receive, sort and place incoming products in appropriate warehouse location., • Document and record any customer return as required., • Record amounts of material shipped or received in Victory computer system., • Mark materials and product with Victory inventory codes., • Notify Supervisor, General Manager or Office Manager of any product, safety, or customer concerns., • Assist with general counting of inventory., • Open all containers, crates or bales as required to sort and maintain stock., • Organize the warehouse for cleanliness and safety at all times., • Sweep, mop, and perform other routine maintenance., • Maintain all safety standards, including wearing protective clothing and eyewear as required., • Maintain all quality indicators for operations by verifying product quantity/quality before delivery., • Keep the warehouse accessible and safe for branch staff and visitors., • Coordinate last minute or unscheduled deliveries will be necessary., • Other duties as assigned. What You Need to Succeed: • High school diploma or equivalent, • Forklift Certified, • One or more years’ experience as warehouse clerk preferred., • Fluency in English required, verbal and written., • Basic computer literacy preferred but not required. Physical Requirements: • Perform job duties in severe weather conditions: heat, cold, rain, etc., • Walk for distances of 100 yards repeatedly and without assistance., • Lift 50 pounds and without assistance or equipment, • Utilize all material handling equipment without assistance., • Ability to stand and walk for extended periods of time as a primary job responsibility., • Observance of established safety guidelines in conducting physical work activity duties., • Wear protective equipment as required. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What We Offer: • Corporate culture based on integrity, respect, accountability, and excellence, • Comprehensive training with numerous learning and development opportunities, • An attractive salary reflecting skills, competencies, and potential., • A career with a global packaging company where Sustainability, Safety, and Inclusion are business drivers and foundational elements of the daily work Benefits: • Medical, Dental and Vision Benefits, • 401k with company match, • Paid vacation time & holidays, • Life Insurance & AD&D, • Short- & Long-term Disability Insurance, • Tuition Reimbursement. We are an Equal Opportunity Employer committed to creating and maintaining a diverse workforce: Minorities/Females/Disabled/Veterans #WorkWithSmurfitWestrock #Packaging Solutions Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Job DescriptionPosition Summary The Industrial Refrigeration Technician is responsible for ensuring the safe, reliable, and efficient operation of industrial refrigeration systems and related equipment. This position performs preventive and corrective maintenance, troubleshooting, inspections, and repairs to support continuous production, food safety, equipment reliability, and regulatory compliance. The ideal candidate has hands-on experience with industrial refrigeration systems and a strong understanding of mechanical, electrical, and control systems within a manufacturing environment. Key Responsibilities • Perform routine inspections of industrial refrigeration systems and associated equipment to ensure safe and reliable operation., • Perform scheduled preventive maintenance (PM) and corrective maintenance on refrigeration equipment., • Troubleshoot, diagnose, and repair compressors, condensers, evaporators, valves, pumps, piping, controls, and related components., • Monitor system temperatures, pressures, refrigerant levels, and other operating parameters to identify abnormal conditions and prevent equipment failures., • Inspect and verify proper operation of cold rooms, freezers, refrigeration equipment, and HVAC systems., • Identify refrigerant leaks and take appropriate corrective action in accordance with established safety and environmental procedures., • Troubleshoot mechanical, electrical, and control-related issues affecting refrigeration system performance., • Complete work orders and accurately document maintenance activities, repairs, inspections, and equipment conditions., • Respond to refrigeration equipment breakdowns and emergency maintenance situations in a timely manner to minimize production downtime., • Coordinate maintenance and repair activities with external vendors, contractors, and internal departments as needed., • Support continuous improvement, equipment reliability, and energy-efficiency initiatives., • Maintain technical documentation, equipment records, and maintenance history., • Follow all company safety, quality, food safety, environmental, and regulatory requirements., • Maintain a clean and safe work environment and follow established lockout/tagout and other applicable safety procedures.Qualifications Required: • Technical degree, diploma, or certification in Refrigeration Systems, HVAC, Industrial Maintenance, Electromechanics, or a related technical field., • Minimum 2–3 years of hands-on experience maintaining industrial refrigeration systems., • Strong mechanical and electrical troubleshooting skills., • Ability to read and interpret electrical diagrams, mechanical drawings, blueprints, and technical schematics., • Ability to work independently and respond effectively to equipment failures and emergency situations. Preferred: • Experience with industrial refrigeration systems utilizing ammonia (NH3), CO₂, and/or fluorinated refrigerants., • Refrigerant handling certification, as required by applicable regulations., • Experience working within a food manufacturing or other regulated manufacturing environment., • Experience with PLC-controlled equipment and automation systems., • Familiarity with SCADA and refrigeration monitoring/control systems.Technical Knowledge, • Industrial refrigeration systems and components, • Compressors, condensers, evaporators, pumps, valves, and piping systems, • Electrical and mechanical troubleshooting, • Refrigeration controls and instrumentation, • Preventive and corrective maintenance, • PLC and automation systems, • SCADA and equipment monitoring systems, • HVAC systems, • Refrigerant leak detection and response, • Industrial safety and environmental requirements, • Maintenance documentation and work-order systemsCore Competencies, • Strong troubleshooting and problem-solving skills, • Safety-focused mindset, • Mechanical and technical aptitude, • Attention to detail, • Effective communication and teamwork, • Planning and organizational skills, • Sense of urgency and ability to respond to equipment breakdowns, • Ability to prioritize work in a fast-paced manufacturing environmentKey Performance Indicators (KPIs) Performance may be measured based on: • Response time to equipment failures, • Refrigeration system availability and reliability, • Preventive maintenance completion and compliance, • Reduction of unplanned equipment downtime, • Maintenance quality and recurring failure reduction, • Safety, environmental, and regulatory audit results, • Refrigeration system energy efficiency and consumption #EuroUrgent #EuroHigh

Job Description Who We Are Binsky, a large-scale mechanical contracting and service provider located in Piscataway NJ is seeking a HVAC Commercial Service Technician Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role HVAC service technicians repair and maintain heating and cooling equipment in commercial, and industrial settings. In this role, HVAC service technicians examine faulty equipment, conducting tests with a variety of devices to locate, diagnose, and isolate issues that interrupt performance or create hazards. In many cases, HVAC service technicians follow regular maintenance schedules to keep systems working reliably, but also need to conduct emergency service to make rapid repairs to customer systems. This role requires a balance of technical and mechanical skills, knowledge about HVAC systems and components, and customer service in order to successfully troubleshoot HVAC issues and make necessary repairs. This full-time position may also require some travel, as these technicians work on-site Responsibilities: Maintain HVAC Systems • Many of the HVAC service technician’s day-to-day duties involve performing regular or routine maintenance tasks on HVAC systems. These tasks can include clearing intake and outflow vents of dust and debris, ensuring that filtration systems are clean and effective, and replacing registers in residential or commercial locations. An HVAC service technician may also perform seasonal maintenance as a building’s system switches between heating and cooling functions. Troubleshoot HVAC Equipment • Troubleshooting HVAC systems and system elements is another major duty of the HVAC service technician. Working from issues reported by customers or problems that arise during routine maintenance and system testing, the HVAC service tech attempts to determine which components are at fault. These technicians then determine whether the system or element can be repaired or if it needs to be replaced. Repair and Replace HVAC Systems • HVAC technicians perform a variety of repairs for HVAC systems, ranging from simple parts replacements to complex issues that require a complete replacement of the HVAC system. If an entire system needs to be replaced, the HVAC service technician needs to install and test all new components. For simple repairs, they may replace one or more parts and conduct new tests to ensure that the repairs have restored the system to working order. Consult with Customers • HVAC service technicians frequently consult directly with customers, both to gather information about performance issues and to provide cost and time estimates related to repair and maintenance tasks. Throughout the repair process, these technicians may also provide the customer with updates, answer questions about the system, and provide advice on operations and maintenance Ensure Safe Repair and Operations • While diagnosing and repairing HVAC systems, the service technicians also maintain safe operations and follow best practices for safely working with the system. In most cases, this includes disconnecting the system from its power source to reduce the risk of electric shock. They may also ensure that the areas around the system are dry and free of clutter. For oil and gas-based heating systems, HVAC technicians also ensure that the fuel systems are disconnected before starting repair work. Maintain Customer and Service Records • HVAC technicians also maintain documentation related to customer systems and the services they perform. This helps to ensure that maintenance is performed according to schedule, and it also provides data related to ongoing or recurring issues with the system. HVAC technicians may also prepare documents for customers, including troubleshooting steps they can take between regular maintenance. Qualifications / Skills: • Experience conducting routine and emergency repairs to HVAC systems while interacting directly with customers., • Have a strong grasp of best practices and principles related to HVAC system installation, maintenance, and operations, • Excellent troubleshooting and problem solving skills, • Provide outstanding customer service and answer customer questions, • Effective communication with customers and other trade professionals. such as plumbers and electricians, • Chiller, black or blue seal licenses and VFD experience is a plus Union Card • Active and in good standing Binsky values the well-being of its employees and offers competitive wages and a range of benefits. Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job Description Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customer’s products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along the distribution process. Hours/Shift: • 1st Shift from 6:00am – 2:30pm, • 2nd Shift from 2:30pm – 11:00pm HOW YOU WILL CONTRIBUTE (Overview & Key Responsibilities): As an Industrial Refrigeration Mechanic, you will be responsible for conducting maintenance, setup, troubleshooting, repairs, preventive maintenance, and operation of industrial freezers/refrigerators and related production equipment used in a manufacturing environment. • Provides emergency/unscheduled repairs of industrial freezers/refrigerators and related production equipment during production and performs scheduled maintenance repairs during machine service., • Monitor industrial freezer/refrigerators performance and identify potential issues before equipment failures occur., • Prepares industrial freezers/refrigerators, machinery, and related production equipment for scheduled production runs., • Diagnose malfunctions and perform necessary repairs or replace defective parts., • Performs mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging and production machines., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Perform daily routine preventive maintenance and maintain accurate daily repair logs., • Track inventory machinery/equipment with their respective spare parts., • Comply with OSHA safety and health rules., • Training: May be requested to provide training to future machine operators in their perspective roles., • Any additional duties as needed WHAT YOU NEED TO SUCCEED (Qualifications): • High school diploma or GED required; technical school, vocational training, or equivalent industrial maintenance or refrigeration experience preferred., • Bilingual in English & Spanish, strongly preferred, • 3-5 years’ of experience in an industrial maintenance mechanic role, preferably supporting industrial freezers, refrigeration systems, or related equipment in a manufacturing, packaging, or cold storage environment., • Knowledge with the following: Accepted practices and processes in the maintenance trades; electric motors, relays, PLCs, electro-mechanical equipment and systems found in machinery, including industrial freezer and refrigeration systems; servicing and maintenance of industrial equipment, including simple power, heating and cooling units., • Read and work from sketches, drawings and blueprints; understand occupational hazards and safety precautions of the machinery., • Ability to read and understand product specifications., • Forklift experience preferred, • Ability to lift up to 35 lbs. multiple times a day, • Ability to perform basic mathematical operations. Ability to bend, reach, kneel, and stand for extended period of time. WHAT WILL SET YOU APART (Competencies): • Good multitasking and prioritization skills., • Mechanically inclined., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Ability to work in a team environment., • Good time management skills., • Good analytical and problem-solving skills. WHY JOIN US: At Cryopak, we strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Voluntary Accident, Critical Illness, and Hospital Indemnity Insurance, • Voluntary Life and AD&D, • Short-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Position Description Ryder is hiring an experienced Mid-Level Diesel Technicianin South Plainfield, New Jersey — offering weekly pay, excellent benefits, and a Technician career you can feel good about. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $33.00 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday Weekends OFF, • Hours: Second Shift 2:30 pm – 11:00 pm We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles. Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Aubrey or text “South Plainfield ” to 904-420-7747 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • 80 hours PTO your first year, starting Day 1, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Build your skills - paid training, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 7 hours ago (9/29/2026 1:19 PM) Requisition ID 2026-211797 Location (Posting Location) : State/Province NJ Location (Posting Location) : City SOUTH PLAINFIELD Location (Posting Location) : Postal Code 07080 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $33.00/Hr. Max Pay USD $33.00/Hr.

Position Description Ryder is hiring aMid-LevelDiesel Technician in New Brunswick, New Jersey — providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $27.00 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Saturday with Tuesday and Sunday Off, • Hours: Second Shift Monday - Thursday 2:00 pm – 11:30 pm, Friday 1:00 pm - 9:30 pm, Saturday 7:00 am - 3:30 pm We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call “Dominique” or text “New Brunswick” to 904-541-9562 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 9 hours ago (10/9/2026 10:44 AM) Requisition ID 2026-212770 Location (Posting Location) : State/Province NJ Location (Posting Location) : City NEW BRUNSWICK Location (Posting Location) : Postal Code 08901 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $27.00/Hr. Max Pay USD $27.00/Hr.

Job Description About Us: Sugaring NYC Somerset is an organic waxing studio specializing in sugaring hair removal, brow lamination, and lash lifts. We’re dedicated to providing a toxin-free, cruelty-free, and empowering self-care experience. We’re looking for a Lead Esthetician to lead our team and ensure top-quality service for our clients. About the Role: The Lead Esthetician is a hands-on leader who ensures smooth daily operations, maintains high service standards, and fosters a positive team culture. This role combines technical expertise in sugaring and beauty services with strong leadership, training, and customer service skills. You’ll be the bridge between our estheticians and management, ensuring a welcoming and hygienic environment while supporting scheduling, inventory, and team performance. Key Responsibilities: Team Leadership & Training • Supervise and mentor Estheticians to maintain service excellence., • Train new hires and provide ongoing development for existing staff., • Address service-related concerns and client feedback professionally. Salon Cleanliness & Maintenance • Ensure treatment rooms and common areas meet the highest hygiene standards., • Delegate and oversee daily cleaning routines., • Perform routine inspections to maintain equipment and safety standards. Client Experience & Retention • Build strong relationships with clients to encourage return visits and memberships., • Handle escalated client concerns to ensure satisfaction. Inventory & Quality Control • Monitor and report stock levels for treatment products and tools., • Ensure staff follows company protocols for all services (e.g., sugaring, lash lifts, brow lamination)., • Conduct service quality checks. Scheduling • Assist with shift coverage and staff scheduling. Requirements: ✅ 3+ years of experience in sugaring or a related beauty service. ✅ Valid Esthetician or Cosmetology License issued by the New Jersey State Board. ✅ Strong leadership and mentorship abilities. ✅ Excellent communication and customer service skills. ✅ Ability to multitask in a fast-paced environment. ✅ Detail-oriented with a commitment to hygiene and safety standards. Why Join Us? • Be part of a growing, women-owned business focused on organic self-care., • Competitive pay + tips + performance bonuses., • Ongoing professional development and growth opportunities., • Work in a fun, empowering, and toxin-free environment! Ready to lead our team and help redefine self-care? Apply now!

Overview\n \n \nOur team members are the heart of what makes us better. \n \n \nAt Hackensack Meridian Health we help our patients live better, healthier lives - and we help one another to succeed. With a culture rooted in connection and collaboration, our employees are team members. Here, competitive benefits are just the beginning. It's also about how we support one another and how we show up for our community. \n \n \nTogether, we keep getting better - advancing our mission to transform healthcare and serve as a leader of positive change.\n \n \nThe Nuclear Medicine Technologist Prepares, measures and administers radiopharmaceuticals for use in diagnostic and therapeutic studies. Performs and assists with nuclear medicine studies. Responsible for patient safety protocols. Maintains all federal, state, local and regulatory agency requirements. Cleans equipment, transports patients and performs clerical duties as required.\n \n This position is to support the nuclear stress tests at our new MetroPark Health and Wellness Center in Iselin, NJ. \n \n Responsibilities\n \n \nA day in the life of a Nuclear Medicine Technologistat Hackensack Meridian Health includes:\n \n\n • Computer system knowledge: Ensures that patient charges are properly recorded into RIS and procedures are tracked accurately. Utilization of SMS, PACS, RMS and NMIS downtime procedure. Thoroughly familiar with technical procedures and QA/QC protocols.\n, • Patient Care and Satisfaction: Thoroughly explains all procedures to patient, thus alleviating fears and/or anxiety, and to provide Best Healthcare Experience.\n, • Patient Safety: Monitors packages containing radioactive material for contamination of leakage; correctly opens packages containing radioactive material. Verifies name and properly identifies patient prior to procedure being performed. Uses two IDs to ensure compliance.\n, • Safely and efficiently utilizes equipment consistent with patient needs and departmental routine.: Uses proper ID to include patient demographics. Quality Control procedures are done consistently as required per radioactive license. Maintains records of radioisotopes received, used and stored in accordance with state/federal regulations\n, • Work Environment: Maintains proper work environment. Prepares room, equipment and materials needed for examinations, positioning aids for patient comfort and security and protective shields and apparel. Rooms are clean and well stocked after each procedure before new patient arrival.\n, • Other duties and/or projects as assigned.\n\n \n Qualifications\n \n Licenses and Certifications Required:\n \n\n • Nuclear Medical Technologist License.\n, • BCLS - Basic Life Support\n, • NJ DEP License\n\n If you feel the above description speaks directly to your strengths and capabilities, then please apply today!\n \n Compensation\n \nMinimum rate of $48.29 Hourly\n \n \nHMH is committed to pay equity and transparency for our team members. The posted rate of pay in this job posting is a reasonable good faith estimate of the minimum base pay for this role at the time of posting in accordance with the New Jersey Pay Transparency Act and does not reflect the full value of our market-competitive total rewards package. \n \n \nThe starting rate of pay is provided for informational purposes only and is not a guarantee of a specific offer. Posted hourly rates may be stated as an annual salary in the offer and posted annual salaries may be stated as an hourly rate in the offer, depending on the level and nature of the job duties and credentials of the candidate. The base compensation determined at the time of the offer may be different than the posted rate of pay based on a number of non-discriminatory factors, including but not limited to: \n\n • Labor Market Data: Compensation is benchmarked against market data to ensure competitiveness.\n, • Experience: Years of relevant work experience.\n, • Education and Certifications: Level of education attained, including specialized certifications, credentials, completed apprenticeship programs or advanced training.\n, • Skills: Demonstrated proficiency in relevant skills and competencies.\n, • Geographic Location: Cost of living and market rates for the specific location.\n, • Internal Equity: Compensation is determined in a manner consistent with compensation ranges for similar roles within the organization.\n, • Budget and Grant Funding: Departmental budgets and any grant funding associated with the job position may impact the pay that can be offered.\n\n \nSome jobs may also be eligible for performance-based incentives, bonuses, or commissions not reflected in the starting rate. Certain positions may also be eligible for shift differentials for work performed on evening, night, or weekend shifts. \n \n \nIn addition to our compensation for full-time and part-time (20+ hours/week) job positions, HMH offers a comprehensive benefits package, including health, dental, vision, paid leave, tuition reimbursement, and retirement benefits.\n \n HACKENSACK MERIDIAN HEALTH (HMH) IS AN EQUAL OPPORTUNITY EMPLOYER \n \n \nAll qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, sex, sexual orientation, gender identity or expression, pregnancy, breastfeeding, genetic information, refusal to submit to a genetic test or make available to an employer the results of a genetic test, atypical hereditary cellular or blood trait, national origin, nationality, ancestry, disability, marital status, liability for military service, or status as a protected veteran.\n \n Our Network\n \n Hackensack Meridian Health (HMH) is a Mandatory Influenza Vaccination Facility\n \n \nAs a courtesy to assist you in your job search, we would like to send your resume to other areas of our Hackensack Meridian Health network who may have current openings that fit your skills and experience.

Position Description Ryder is hiring aMid-LevelDiesel Technician inSouth Plainfield, New Jersey— providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T2James • Hourly Pay: $33.50 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday Weekends OFF, • Hours: Third Shift 11:00 pm – 7:00 am We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Jordon or text “South Plainfield” to 904-869-3454 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 11 hours ago (10/14/2026 8:36 AM) Requisition ID 2026-213219 Location (Posting Location) : State/Province NJ Location (Posting Location) : City SOUTH PLAINFIELD Location (Posting Location) : Postal Code 07080 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $33.50/Hr. Max Pay USD $33.50/Hr.

Position Description Ryder is hiring a Senior Level Diesel Technician in South Plainfield, NJ— providing a stable company for your career with weekly pay and excellent benefits. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/T3 • Hourly Pay: $36.50 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday–Friday, • Hours: First Shift 11:00 pm – 7:00 am We provide the best State-of-the-Art Diagnostics and Tools to all Ryder Maintenance Repair Mechanics who work on Heavy Duty Vehicles Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Jordon or text “South Plainfield” to904-869-3454to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • Earn PTO starting Day 1. Up to 80 hours accrued in 1st year, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Paid training that keeps you ahead, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Basic diagnostics and repairs, including AC and electrical systems, required, • Three (3) years or more relevant work experience, preferred, • All other certification as required by location, required, • Valid Commercial Driver License (CDL) CLASS A,preferred, • All other certification as required by location, required, • ADDITIONAL REQUIREMENTS:, • Must have a minimum of 2 years of experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Knowledge of and the ability to apply knowledge of computer skills: PC, Windows, mouse, etc., • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties including:, • Performs standard vehicle maintenance, • Performs preventive maintenance, • Diagnoses complex mechanical and electronic problems utilizing diagnostic computer when applicable, • Completes complex and detailed mechanical inspections & repairs with minimal supervision, • Replaces defective components as instructed, • Works unsupervised on most tasks, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task., • Utilizes key functions of Shop Management System and electronic documentation available., • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)., • Acts as mentor for Tech 1 and Tech 2 levels., • Demonstrate the ability to access and use internal and external maintenance documents., • Other support duties as required to support operations. These could include but are not limited to Service Island support, • SBTIII trained within 180 days (SBT220), • Complete 2 of the OEM On-Line diagnostic scan tool software courses as required by location fleet mi. (predominant OEM of fleet mix completed within 365days) Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 11 hours ago (10/14/2026 8:56 AM) Requisition ID 2026-213220 Location (Posting Location) : State/Province NJ Location (Posting Location) : City SOUTH PLAINFIELD Location (Posting Location) : Postal Code 07080 Category Technicians/Service Employees5 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000356 Min Pay USD $35.00/Hr. Max Pay USD $35.00/Hr.

Job DescriptionJob Title: Sanitation WorkerJob Description The Sanitation Worker is responsible for maintaining a clean, sanitary, and safe manufacturing environment. The primary duty of this position is to thoroughly clean, sanitize, and sterilize production machinery and equipment to ensure compliance with company quality, safety, and regulatory standards. Secondary responsibilities include cleaning and maintaining the manufacturing floor, production areas, warehouses, break areas, and other facility spaces as assigned. Responsibilities • Clean, sanitize, and sterilize manufacturing machinery, production equipment, tools, and workstations according to established procedures., • Disassemble and reassemble equipment as necessary for deep cleaning and sanitization., • Use cleaning chemicals, sanitizing agents, pressure washers, and other sanitation equipment safely and effectively., • Perform routine inspections of machinery to ensure cleanliness and identify potential maintenance concerns., • Complete sanitation logs, cleaning records, and other required documentation accurately., • Follow all Good Manufacturing Practices (GMPs), safety regulations, lockout/tagout procedures, and company sanitation standards., • Ensure production equipment is ready for operation following scheduled cleaning activities., • Sweep, mop, scrub, and sanitize manufacturing floor areas., • Clean walls, drains, storage areas, loading docks, and other facility spaces., • Remove trash, recyclables, and production waste from designated areas., • Restock sanitation supplies and notify supervisors when inventory is low., • Assist with special cleaning projects during shutdowns, maintenance periods, or audits., • Maintain a clean and organized work environment at all times.Essential Skills, • General labor, • Sanitizing techniques, • Manufacturing environment experience, • Cleanroom procedures, • Inspection and packaging skillsWhy Work Here? Join a growing company where appreciation events, free snacks, and ample opportunities for growth create a rewarding work environment. Work Environment Work in a food manufacturing facility that follows strict GMP guidelines. Please note that wearing jewelry or makeup is not permitted in this environment. Job Type & Location This is a Contract to Hire position based out of Piscataway, NJ. Pay and Benefits The pay range for this position is $18.00 - $18.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Piscataway, NJ. Application Deadline This position is anticipated to close on Oct 23, 2026. Workplace Type This is a fully onsite position in Piscataway,NJ. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description • We are hiring immediately for a full time SENIOR COOK position., • Location: International Flavors & Fragrances - 150 Docks Corner Road, Dayton, NJ 08810. Note: online applications accepted only., • Schedule: Full time; Monday through Friday, hours may vary. More details upon interview., • Requirement: Previous batch cooking is required. Must have local and state health/safety regulation knowledge. *Internal Employee Referral Bonus Available • Pay Range: $19.00 per hour to $21.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1571497. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Prepares food to ensure it is nutritious and properly flavored in accordance with applicable federal, state, local and company standards, guidelines and regulations. Essential Duties and Responsibilities: • May oversee the cooking activities of food service associates as assigned by Food Service Director., • Prepares various entrees and menu items following established recipes., • Operates and cleans equipment after each use. Performs scheduled routine cleaning., • Stores, labels and dates food items according to policy. Helps maintain organized storage of dry goods and refrigerated and frozen products., • Follows HACCP guidelines to ensure quality and safety of food supply., • Complies with federal, state and local health and sanitation regulations and department sanitation procedures., • Assists Food Service Director in maintaining accurate daily production records and completes all required documentation, reports, and logs as assigned., • Assists in the cross training of employees., • Performs other duties as assigned. Associates at Eurest are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyEurest.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. Req ID: 1571497 [[req_classification]]

Job Description Overview Role: Cook Join Healthcare Services Group (HCSG) as a Cook, where you will play a vital role in preparing and cooking nutritious meals for residents in a long-term care facility. At HCSG, we are passionate about positively impacting the communities we serve. If you share our commitment to excellence and enhancing customer and resident experiences, join us and make a difference! Responsibilities • Prepare and cook meals according to planned menus and recipes., • Ensure food quality, taste, and presentation meet HCSG standards., • Adhere to food safety and sanitation guidelines; maintain a clean and orderly kitchen., • Assist with inventory management and ordering of supplies., • Interact positively with residents, staff, and guests, providing excellent customer service., • All other duties as assigned. Qualifications • High school diploma or equivalent., • Previous experience as a cook or in food preparation is preferred., • Ability to follow recipes and dietary restrictions., • Maintain a positive attitude and effectively communicate with building occupants, administration, and HCSG leadership to perform daily tasks., • Compliance with COVID-19 vaccination policies, • Must be able to lift/carry a maximum of 50 pounds, push/pull a maximum of 50 pounds, stand, sit, bend and walk for extended periods., • Must be able to perform routine, repetitive tasks continuously., • Must be able to work around food and cleaning products., • May be required to complete an approved sanitation and safety course., • Current ServSafe or Food Handler certification is required based on State / County law., • Residency within the service area required Ready to Join Us? If you're looking for a role where you can contribute to serving delicious meals and be part of a supportive and dedicated team, apply now and start making a difference at HCSG!

Job DescriptionDescription: The Dental Assistant reports to the site manager and Assistant Site Manager (if applicable) with clinical oversight from SVP of Dental Services, SVP of Nursing, and Chief Medical Officer. The Dental Assistant is responsible for assisting the dentist(s) and dental hygienist(s) in the direct provision of primary care dental services to patients of the Zufall Health Center (ZHC). The Dental Assistant is also responsible for sterilization, preparation, and inventory control of all instruments and supplies. Essential Functions, Duties, and Responsibilities • Serves as dentist’s or dental hygienist’s chair-side assistant, • Prepares operatory for patient treatment as per ZHC protocols and the dentist’s or dental hygienist’s directions, • Assists patients in resolving minor difficulties, answering their questions, and giving directions to patients as authorized by the dentist or dental hygienist, • Exposes and develops dental radiographs in accordance with the state regulations and law as well as ZHC directive and protocol, • Performs independent procedures as delegated and directed by the dentist in accordance with the state regulation and law and ZHC directive and protocol, • Maintains dental Department equipment in accordance with manufacturer’s instructions for use and, • Dental Department policy and protocol, • Maintains all Dental Department areas in compliance with Dental Department directives and protocols as well as ZHC policies and procedures relative to infection control, blood borne pathogens, exposure control, and safety issues, • Maintains all dental department’s materials, equipment, and ensures the sterility of all clinical material and equipment in accordance with the products standards, ZHC infection control policies, Association for the Advancement of Medical Instrumentation (AAMI) and The Joint Commission (JC) standards, • Maintains adequate operatory supplies and compiles a list of individual item shortages for inventory control and ordering purposes, • Maintains a list of all Dental Department patients, monitors patient flow, and assists the SVPof Dental, • Services, dentist(s) and dental hygienist(s) in ensuring that all patient records and documents are properly and accurately completed and filed, • Receives and places work-related telephone calls consistent with professional matters, clinic business and ZHC patient care needs, • Assist with various clinical and administrative functions of the center as appropriate., • Ensures the proper disposal of all contaminated or potentially contaminated materials in accordance with, • Dental Department directive, ZHC policy as well as state and federal regulation(s), • Performs all functions in full compliance with ZHC and the Dental Department Blood Borne Pathogens, • Exposure Control plan including but not limited to the use of Personal Protective Equipment and Universal Precautions, • Participates in appropriate health promotion / disease prevention activities, both on-site and off-site as required, • Travels between sites when required to meet ZHC needs, • As directed by a supervisor, performs other related and/or necessary tasks to achieve organizational and programmatic goals and objectives, • Responsible for maintaining personal compliance with all applicable federal, state, local and ZHC rules., • Follows all regulations, protocols and procedures including but not limited to participating in the provision of clinical dental care, as well as workplace safety, public health, and patient confidentiality in keeping with HIPAA rules and regulations, • Conducts routine testing of dental units, • Available to provide proper coverage of auxiliary staff, when staff calls out sick, providing lunch and late coverage, • Demonstrates and teaches new staff, students, interns, and volunteers the use of equipment and proper dental protocol as it relates to patient care, • Works in patient intake areas as needed, • Performs other duties as assigned Requirements: • Requires a comprehensive knowledge of dental assisting techniques and procedures for all phases of general dentistry, • Knowledge of modern dental materials, their storage, handling, and applications is required., • Completion of accredited course in dental assisting preferred, • Ability to attend to multiple tasks at the same time and prioritize assignments and responsibilities to ensure compliance with established deadlines and protocols, • The Dental Assistant must be able to creatively work with other health care professionals from a variety of disciplines to achieve maximal results for the center’s patient, • Effective oral and written communication skills in English are required, • Effective oral communication skills in Spanish required, • The Dental Assistant must be cognizant of the expectations and concerns of the center’s dental patients and be able to respond in an empathetic and professional manner, • The ability to work with people from diverse social, ethnic, and economic backgrounds is necessary, • Working under stressful conditions as well as irregular hours may be required, • Frequent exposure to communicable diseases, body fluids, toxic substances, medicinal preparations, radiation, and other conditions common to a clinical environment may routinely be encountered, • Prolonged sitting or standing may be required, • Those physical movements and the degree of mobility, manual dexterity and hand-eye coordination normally associated with dental assisting in the general practice of dentistry will be performed on a repetitive basis, • The ability to distinguish between letters and symbols and the ability to utilize telephones, computer terminals and copiers are required, • Learn and apply the trauma informed care principles with the scope of the position Education, Training and Experience • High school diploma or GED certificate, • Certified Dental Assistant preferred, • Registered Dental Assistant preferred, • Current CPR (BLS) required, • Valid Radiology license in NJ, • Fluent in both English and Spanish preferred, • Knowledge of Microsoft Office, typing, and use of electronic medical records are required

Job Description We are looking for experienced Commercial / Residential HVAC Service Techs to join our team ! You will install, service and repair Heating and Air Conditioning Systems. Competitive Pay: $5000 signing bonus If you have the Skill's, Knowledge and Experience needed. Responsibilities : Install new Heating, Ventilation, and Air Conditioning Systems Inspect and preform equipment repairs and replacements Respond to emergency maintenance request's and routine preventative maintenance Adhere to all Safety Policies and Procedures Qualifications : Previous experience in HVAC or other related fields Experience, with Electrical Wiring Diagrams Ability to handle physical workload, and solving problems and critical thinking skills. 5 Years experience $ 5000 Signing Bonus Job Type: Full-Time Benefits : 401 ( K ) with matching Dental Insurance Flexible Schedule Health Insurance Life Insurance Paid Time Off Vision Insurance Work Location : In person \nCompany Description Family environment, great place to work learn and grow your skills, great compensation package. Family environment, great place to work learn and grow your skills, great compensation package.

Job Description We are looking for an HVAC Service Technician to join our team! You will install, service, and repair heating and air conditioning systems. Responsibilities: • Install new heating, ventilation, and air conditioning systems, • Inspect and perform equipment repairs and replacements, • Perform routine preventative maintenance, • Respond to emergency maintenance requests, • Adhere to all safety policies and procedures Qualifications: • Previous experience in HVAC or other related fields, • Familiarity with HVAC wiring diagrams, • Ability to handle physical workload, • Strong problem solving and critical thinking skills

Job Description We are seeking a skilled and dedicated Journeyman Electrician to join our team. The ideal candidate will have extensive experience in electrical work, particularly in residential & commercial settings. This role involves building, renovating, and maintaining electrical systems in compliance with the National Electrical Code (NEC). The successful applicant will demonstrate proficiency with various tools and equipment while ensuring safety and quality standards are met on construction sites. Duties • Install, maintain, and repair electrical systems and equipment in residential & commercial buildings., • Read and interpret blueprints, schematics, and technical drawings to determine layout and installation procedures., • Utilize hand tools, voltmeters, ohmmeters, and other diagnostic equipment to troubleshoot electrical issues., • Collaborate with other tradespeople on construction sites to ensure timely project completion., • Ensure all work complies with NEC standards and local regulations., • Conduct routine inspections of electrical systems to identify potential hazards or necessary repairs., • Document work performed and maintain accurate records of materials used. Experience • Proven experience as a Journeyman Electrician., • Strong knowledge of electrical systems, wiring methods, and installation techniques., • Familiarity with NEC regulations and safety protocols., • Proficient in using hand tools and diagnostic equipment such as voltmeters and ohmmeters., • Ability to read and understand schematics and technical drawings., • Excellent problem-solving skills with a keen attention to detail., • Strong communication skills for effective collaboration with team members on-site. Join our team of professionals dedicated to delivering high-quality electrical services while ensuring safety and compliance on every project. We look forward to your application! \nCompany Description Powered Up Electrical Services is a growing electrical contracting company committed to quality workmanship, safety, and customer satisfaction. We work on a mix of [residential/commercial/industrial] projects and take pride in maintaining a professional, team-oriented work environment. Powered Up Electrical Services is a growing electrical contracting company committed to quality workmanship, safety, and customer satisfaction. We work on a mix of [residential/commercial/industrial] projects and take pride in maintaining a professional, team-oriented work environment.

Job Description POSITION SUMMARY: The Maintenance Technician is responsible for maintaining a safe, clean, functional, and welcoming YMCA facility for members, guests, staff, and the community. This position performs routine maintenance, repairs, custodial duties, room setups, preventative maintenance, and facility inspections to ensure the branch always operates efficiently and in excellent working order and is a place for all. Working under the direction of the Senior Facility Director, the Maintenance Technician supports the overall operation of the facility and may provide assistance at other YMCA locations as needed. ESSENTIAL FUNCTIONS: • Perform routine maintenance and repair of building systems, equipment, fixtures, and furnishings., • Complete minor plumbing, electrical, carpentry, painting, drywall, and general repair work., • Conduct routine facility inspections and identify maintenance needs and safety concerns., • Perform preventative maintenance tasks according to established schedules., • Maintain a clean, safe, and attractive environment throughout the facility., • Clean restrooms, common areas, fitness spaces, offices, and program rooms., • Sweep, mop, vacuum, dust, sanitize, and remove trash and recycling throughout the day., • Set up and break down rooms for programs, meetings, special events, and community activities., • Support YMCA risk management and safety initiatives., • Maintain records of maintenance activities, repairs, and inspections., • Support the Senior Facility Director with facility projects and operational needs., • Provide maintenance and custodial support at other YMCA facilities as assigned., • Serve as a positive representative of the YMCA and support its mission and values. REQUIREMENTS: • High school diploma or equivalent required., • Minimum one to three years of facility maintenance, building maintenance, custodial, or related experience preferred., • Knowledge of plumbing, electrical, carpentry, painting, and mechanical systems., • Ability to safely operate maintenance equipment, power tools, and cleaning equipment., • Strong organizational, communication, and customer service skills. PHYSICAL REQUIRIEMENTS/WORKING CONDITIONS: • Ability to stand, walk, climb, bend, stoop, kneel, and lift up to 50 pounds regularly., • Ability to work indoors and outdoors and safely use ladders, tools, cleaning equipment, and maintenance machinery., • Ability to work in a variety of climates and conditions, working both inside and outside.

Job Description The Maintenance Technician 1 performs highly diversified work involving electrical and mechanical equipment maintenance of a skilled and complex nature. Installs, repairs and maintains manufacturing equipment and plant facilities necessary for the satisfactory operations of equipment and processes. The Maintenance Technician 1 is expected to: · Minimize downtime on equipment · Maximize effectiveness and completion rate on PM system. · Ensure newly maintained equipment meets 100% of general safety standards Machine Maintenance 30% · Diagnoses complex machine and electrical equipment malfunctions and operation difficulties and determines how to correct them checking blueprints, repair manuals or parts catalogs as necessary. · Able to identify and coordinate improvement projects with engineers, vendors, and or contractors · Able to interpret servo drive error codes and error messages displayed on HMIs. · Performs routine maintenance work including inspecting drives, motors and belts, checking fluid levels and replacing filters · Helps in the investigation of operating difficulties and assists in taking corrective action. · Troubleshoots PLC malfunctions · Able to research, spec out and order parts accurately for repairs and upgrades Equipment Assembly 30% · Helps construct new equipment, machinery, or facilities as required. · Sets up and operates various types of machine shop equipment. · Reads, understands and implements electrical, electronic, pneumatic, hydraulic and mechanical diagrams and schematics required to install production machinery and safety equipment. Facility Maintenance 20% · Assists in the maintenance of heating, ventilating and air conditioning equipment. · Performs general building maintenance and minor repairs throughout the facility including painting, carpentry, plumbing and plastering · Works in conjunction with outside vendors EHS & Documentation 20% · Maintains related records, performs associated handling duties and maintains work areas in a neat and orderly manner. · Assists in managing hazardous materials including maintaining an accurate inventory, ensuring proper storage, scheduling/documenting of hazardous waste shipments and proper disposal. · Assists in audits for ISO 14001 This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED); or at least 3-5 years of maintenance experience and/or training; or equivalent combination of education and experience is required. LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · Knowledge of plant equipment & machinery · Precision shop measuring devices and meters · Forklift operator · Mechanical aptitude · MS Word · MS Outlook OTHER SKILLS · Manual dexterity · Spatial dexterity · PLC and test equipment repair · Read and interpret o equipment manuals o work orders o hydraulic schematics o electrical schematics o pneumatic and mechanical schematics · Verbal communication · Able to work at heights · Able to work with chemicals Hourly starting rate: $35.50/hr MICRO offers a comprehensive benefits package to eligible employees, including medical, dental and vision insurance; life and disability insurance; a 401(k) retirement plan; paid time off; paid holidays; and other company-sponsored benefits. Eligibility and benefit offerings are subject to the terms of the applicable plans and company policies. While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk and hear. The employee must regularly lift, push, pull, carry and/or move up to 50 pounds alone and more than 50 pounds with assistance. While performing this Job, the employee is regularly required to exhibit strong manual and spatial dexterity. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; risk of electrical shock and vibration. The employee is frequently exposed to hazards including fumes, odors, dusts, mists, gases or airborne particles and hazardous chemicals. The employee is occasionally exposed to high, precarious places and outside weather conditions. The noise level in the work environment is usually loud.

Job Description CRM Residential is a trusted and growing leader in affordable housing property management, committed to strengthening communities and elevating the places people call home. As we continue to expand our portfolio, we are focused on improving operational excellence across our properties—investing in upgrades that create safer, more welcoming environments and delivering strong results, with most communities earning 90% or higher on inspections in the past year. At the heart of our success are the people who choose to build their careers with us. We believe exceptional housing starts with empowered teams, which is why we invest in ongoing training, clear career paths, mentorship programs, and technology that makes work easier, safer, and more efficient. Working at CRM Residential is more than a job—it’s a purpose-driven career where you can grow, make a meaningful impact, and help provide reliable, quality homes for those who need them most. Why Join the CRM Residential Team: • Comprehensive Health Coverage, • Retirement Savings with employer contribution, • Bonus Potential, • Paid Time Off (PTO), • Company Paid Holidays, • Once eligible for enrollment, the company will contribute a Safe Harbor match of 3% of your compensation to your 401(k) account, regardless of whether you choose to make your own contributions.Pay Rate: $24.00-27.00 per hour This position is eligible for a sign-on bonus of $600, disbursed according to the following schedule: an initial installment after 30 days of employment, a second installment after 3 months, and the remaining balance after 6 months. What You’ll Get To Do: The Maintenance Technician will receive general supervision and direction from the Community Manager. The Maintenance Technician will comply with established policies and procedures and not act contrary to such guidelines without Community Manager approval. The Maintenance Technician will be responsible for but not limited to: • Conducting routine maintenance tasks such as changing light bulbs, unclogging drains, and fixing leaky faucets, • Performing minor repairs such as drywall patching, painting, and carpentry work, • Maintaining the property's grounds, including lawn care, snow removal and cleaning of common areas, • Responding to tenant requests for repairs and maintenance issues, • Conducting regular inspections and identifying potential maintenance issues before they become major problems, • Assisting with major repairs or renovations as needed Requirements: • High School diploma or equivalent education required. 3-4 years of experience can offset minimum educational requirements for this position., • 2 years of maintenance technician experience, • Must have experience in plumbing, electrical, carpentry, painting and general maintenance., • Previous experience in commercial or multi-unit residential property is desirable. Experience level may vary due to the special needs of the property., • The position requires effective oral and written communication skills, • Maintains current license/certificate and/or specialized skills in at least one (or more) of the following building trades: electrical, plumbing, carpentry, HVAC, fire protection or mechanical., • Valid driver's license and reliable transportation, • Full Time Scheule: Monday-Friday 8:30am-5:00pm, • Must be willing to be on-call 24/7 Physical/Working Requirements: • Indoor/outdoor environment subject to changing conditions and temperatures exceeding 90 degrees at times, • Ability to lift 55 pounds independently and support team lift with reasonable accommodations, • This job involves walking and standing for long periods as well as stooping, squatting, lifting, carrying, pushing and climbing. Working on ladders at varying heights, • Possible contact with blood borne pathogens and /or bodily fluids About CRM Residential: CRM Residential is an award-winning full-service property management company which professionally manages 11,000+ apartments valued in excess of one billion. We are exclusively third-party so there is no conflict of interest between the properties that we manage for our clients and our own properties, because we do not own any properties. Our focus is dedicated to our clients. We are an equal opportunity employer and welcome applicants from all backgrounds to apply. If you have a passion for property maintenance and a desire to work for a reputable company, we encourage you to apply for this exciting opportunity. Powered by JazzHR Yxr6Gz0XAL

Job DescriptionBenefits: • Health insurance, • Opportunity for advancement, • Paid time off, • 401(k), • Employee discounts, • Flexible schedule Position Summary The Maintenance Technician is responsible for maintaining a safe, clean, and fully operational Planet Fitness club. This position performs preventative maintenance, troubleshooting, repairs, and facility upkeep to ensure members and team members enjoy a positive experience in a clean, well-maintained environment. The Maintenance Technician will work closely with club management to complete work orders promptly, minimize equipment downtime, and uphold Planet Fitness brand standards. Essential Duties and Responsibilities Facility Maintenance • Perform routine inspections of the club to identify maintenance needs and safety concerns., • Complete preventative maintenance on fitness equipment and club facilities., • Repair or coordinate repairs for cardio equipment, strength equipment, tanning beds, HydroMassage units, Total Body Enhancement machines, massage chairs, and other club amenities., • Maintain HVAC systems, lighting, plumbing fixtures, electrical components, doors, locks, flooring, ceiling tiles, and walls., • Ensure restrooms, locker rooms, showers, and common areas remain in excellent working condition., • Respond promptly to maintenance requests and emergency repairs.Equipment Maintenance, • Diagnose and repair fitness equipment to minimize downtime., • Perform scheduled lubrication, adjustments, calibration, and replacement of worn components., • Maintain accurate maintenance logs for all equipment inspections and repairs., • Coordinate with approved vendors for warranty repairs and specialized service.Preventative Maintenance, • Follow established preventative maintenance schedules., • Conduct regular inspections of life safety equipment, emergency lighting, fire extinguishers, AEDs, and exit signs., • Monitor equipment performance and recommend replacement or upgrades when necessary., • Ensure all maintenance work complies with company standards and local building codes. Knowledge, Skills & Abilities • Strong troubleshooting and problem-solving skills., • Knowledge of hand and power tools., • Ability to read maintenance manuals and technical documentation., • Excellent organizational and time management skills., • Ability to prioritize multiple work orders., • Strong communication and interpersonal skills., • Ability to work independently with minimal supervision., • Basic computer skills for completing work orders and maintenance logs.Physical Requirements, • Frequently lift, push, and pull up to 75 pounds., • Ability to stand, walk, bend, kneel, climb ladders, and work overhead for extended periods., • Comfortable working in varying temperatures and confined spaces when necessary., • Ability to safely operate maintenance equipment and tools.Work Schedule, • Full-time position., • Flexible schedule including mornings, evenings, weekends, and holidays as business needs require., • On-call availability for emergency maintenance situations may be required.Performance Expectations The Maintenance Technician will be evaluated on: • Completion of preventative maintenance schedules., • Response time to maintenance requests., • Equipment uptime and operational readiness., • Quality and timeliness of repairs., • Club cleanliness and facility condition., • Safety compliance., • Documentation accuracy., • Teamwork and professionalism.Planet Fitness Core Values The Maintenance Technician is expected to support the Planet Fitness mission by: • Creating a clean, safe, and welcoming environment., • Delivering a Judgement Free Zone® experience., • Demonstrating reliability, accountability, and professionalism., • Supporting team members and members with respect and courtesy., • Maintaining the highest standards of cleanliness, safety, and operational excellence.

Job Description Essential Duties and Responsibilities: Maintenance Mechanic • Perform routine preventive maintenance checks on all production equipment and machinery., • Replaces or repairs parts on machines such as bearings, filter, wiring, valves, gauges and switches., • Replaces electrical parts and equipment., • Observes and listens to mechanical devices in operation to locate causes of trouble., • Dismantles devices to gain access to and remove defective parts., • Examines form and texture of parts to detect imperfections., • Inspects used parts to determine changes in dimensional requirements., • Adjusts functional parts of devices and control instruments., • Repairs or replaces defective parts. Installs special functional and structural parts in devices., • Lubricates and cleans parts., • Start devices to test their performance., • Initiates purchase order for parts and machines., • Required to participate in on-call program and may be required to work additional hours as required., • Ability to use a variety of common hand and power tools. Basic understanding of electrical and mechanical properties., • Follows all safety rules and procedures and observes the operations to insure a safe environment., • Upholds Site and Corporate Environmental Policies by following all Environmental Policies, Procedures and Work Instructions., • Responsible for ensuring the compliance of “Food Product Safety” & “Product Quality” of the molded product, to meet the expectation of our customers. • Understands and follows Hazard Materials Regulations 49 CFR Part 172.704 (a)(1) General awareness/familiarization training, (a)(3) Safety training, and (a)(4) Security awareness training. Requirements: Maintenance Mechanic • 3-5 years’ Maintenance Mechanic experience with industrial machinery., • Experienced understanding of electrical, pneumatic, and hydraulics., • Posses understanding of systems, equipment and schematics., • Knowledge of diagnostic testing to ensure system functionality., • Mechanical troubleshooting skills, • Ability to repair broken or faulty machine parts., • Blow-molding or Injection-molding experience., • Basic mathematical skills involving mechanical aptitude., • Ability to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws. Job Type: Full-time Salary: $25.00 - $35.00 per hour Schedule: • Day shift, • Monday to Friday

Job Description The Maintenance Worker assists in maintaining the hotel’s physical structure, ensuring it remains in excellent condition. We seek highly motivated team members. Our ideal candidates should exude a passion for the hospitality industry that will attract and inspire our team members to cultivate an exceptional guest experience. If you want an exciting career with unlimited growth opportunities. Benefits • Insurance (health, dental, vision, etc), • Paid time off (vacation, sick leave, holidays), • 401K retirement plan, • DailyPay: access your earned wages when needed, • Special team member hotel rates for travel enthusiastsResponsibilities, • Performing routine maintenance tasks and repairs, • Inspecting and troubleshooting equipment and systems, • Ensuring safety and cleanliness of working areas, • Assisting with special projects as assignedRequirements, • Prior experience in maintenance work, • Basic knowledge of electrical, plumbing, and HVAC systems, • Ability to work independently and in a team environment, • Strong problem-solving skills, • Must be able to work Holidays and/or weekends as business needs dictate Note: Duties may adapt to meet evolving business needs. All offers are contingent on background checks. Adhering to Newport Handbook policies is required. Newport Hospitality is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Title: Maintenance Associate Reports to: General Manager Summary of Position: As a Maintenance Associate you will ensure Rock ‘N’ Air is not only maintained as a clean first-class state-of-the-art adventure park but all the attractions are kept in safe condition in accordance with the manufacturer specifications. A hard working, reliable and conscientious person are all the qualifications required. The ability to do routine maintenance and repairs and the desire to appreciate all that went into the best-looking park in the universe is essential. If you don’t believe come see with your own eyes! Physical Requirements • Working days nights, and/or weekends as required., • Work in a noisy, fast paced environment with distracting conditions., • Move about facility and stand for long periods of time., • Lift and carry up to 50 pounds. About Rock ‘N’ Air Rock ‘N’ Air is a brand new, 70,000 square foot (it is HUGE!) indoor Family Entertainment Center! Packed with excitement and fun filled energy for all age groups from 2 to adult, the fun never stops with adrenaline pumping activities such as: a thrilling Zipline, challenging Ropes Course, 2-Story Laser Tag Arena, Virtual Reality and Augmented Reality games, Ninja Course, Climbing Walls & Elements, 3-Level Playground with Ballistic Arena, Warped Walls, Battle Beam, Trapeze, Fidget Ladder, High Jump Air Bag, Trampolines and an expansive Toddler Zone filled with activities to intrigue young minds such as Interactive Sandbox and Ball Wall, Motion Floor, private age-appropriate Trampolines, Indoor Playground with Ball Fountain and so much more! Disclaimer The above job description is meant to describe the general nature and level of work being performed; and is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. We are an Equal Opportunity Employer. We recognize that people are our finest asset. It is our policy to provide equal employment opportunities to all individuals, regardless of race, creed, color, religion or belief, national origin, sex, ancestry, age, marital status, veteran status, disability, medical condition, gender identity or sexual orientation or any other classification protected by law.

Job Description Maintenance Assistant Job Summary: Preferred Care at Old Bridge is seeking a dedicated and skilled Maintenance Assistant to join our team in Old Bridge, New Jersey. As a Maintenance Assistant at our state-of-the-art subacute rehabilitation and skilled nursing center, you will play a vital role in ensuring the smooth operation of our facility. If you have a passion for delivering exceptional service and a keen eye for detail, we encourage you to apply for this FULL_TIME opportunity. About the Role: As a Maintenance Assistant, you will be responsible for performing routine maintenance tasks to ensure the overall upkeep of our facility. This includes but is not limited to: Performing daily and weekly cleaning and maintenance tasks to ensure a clean, safe, and welcoming environment for our residents and staff Conducting minor repairs and performing routine maintenance tasks to prevent breakdowns and ensure the efficient operation of equipment and machinery Restocking and replenishing supplies and inventory as needed Assisting with snow removal and other outdoor tasks as required Collaborating with other departments to ensure a cohesive and efficient work environment Responsibilities: Perform routine maintenance tasks to ensure the upkeep of the facility Conduct routine inspections to identify and address potential issues Assist with snow removal and other outdoor tasks as required Restock and replenish supplies and inventory as needed Collaborate with other departments to ensure a cohesive and efficient work environment Adhere to all safety protocols and procedures to ensure a safe work environment for all staff and residents What We Offer: At Preferred Care at Old Bridge, we are committed to delivering exceptional care and service to our residents and staff. We offer a supportive and collaborative work environment, opportunities for professional growth and development, and a chance to make a real difference in the lives of others. How to Apply: If you are a motivated and detail-oriented individual who is passionate about delivering exceptional service, we encourage you to apply for this exciting opportunity. Please note that this is a FULL_TIME position requiring a minimum of 0 years of experience. If you are interested in joining our team, please apply today! Contact us to apply for this role: [Insert contact information or apply button]

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Maintenance Mechanic - MFG Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Maintenance Mechanic is responsible for maintenance, repair and troubleshooting, Processing equipment such as conveyors, blowers, sifters, burners, grinders, conventional & high-speed encapsulation equipment, vacuum & hydraulic pumps, air compressors, fluid bed dryers, coating machines, granulators, tablet compression machines, etc. Areas of Responsibility Level 1 – Mechanic, Maintenance (MFG) Mechanic supports routine maintenance, equipment cleaning, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to manufacturing maintenance, this role focuses on learning and executing tasks safely and accurately. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup, repair, troubleshooting, and maintenance of manufacturing equipment. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Perform disassembly, cleaning, and setup of basic production equipment., • Assist senior technicians in scheduled maintenance tasks., • Replace small parts (belts, hoses, filters) with direction., • Learn and follow cGMP and safety procedures., • Complete daily logs, maintenance checklists, and safety forms., • Participate in basic troubleshooting with guidance., • Respond to facility and equipment issues under supervision., • Operate forklifts and lifts (certification preferred). Level 2 – Mechanic, Maintenance (MFG) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, and lead to smaller repairs. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct intermediate-level repairs on packaging and processing equipment., • Troubleshoot mechanical, pneumatic, and electrical systems., • Use diagnostic tools (calipers, micrometers, multimeters, etc.)., • Coordinate with vendors to address equipment issues., • Maintain spare parts inventory and request supplies., • Operate and maintain boilers, HVAC, pumps, and compressors., • Record maintenance activities accurately in logbooks and systems., • Train and mentor Level 1 Technicians., • Support emergency calls and on-call rotations. Level 3 – Mechanic, Maintenance (MFG) Mechanic are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Employees operate with minimal to no supervision. They are trusted to independently plan, diagnose, repair, and maintain complex manufacturing equipment. They make high‑level judgments, lead projects, and serve as technical experts and advisors. Employees work closely with the engineering team to identify mechiancal issues, processing issues and propose process improvement measures mechiancally to improve productivity and effeciency of equipment. Have a deep understanding of the process and equipment being used. Key Responsibilities: • Lead troubleshooting and repairs of high-speed and complex machinery (e.g., encapsulators, fluid bed dryers, tablet presses)., • Diagnose and resolve advanced mechanical/electrical problems., • Manage and execute preventative maintenance programs., • Read and interpret advanced schematics, blueprints, and manuals., • Serve as a technical liaison between departments and vendors., • Lead regulatory inspections (OSHA, EPA, etc.) support and documentation., • Mentor and train Levels 1 and 2 staff., • Plan and coordinate plant shutdowns and major repirs., • Champion safety and compliance across the facility. Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (MFG) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • Forklift experience is a plus. Level 2 – Mechanic, Maintenance (MFG) • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • 1+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred. Level 3 – Mechanic, Maintenance (MFG) • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • Trade certifications in HVAC, electrical, pneumatics, or hydraulics are highly preferred. Certifications, Licenses, Credentials: • License or certifications in electronics, pneumatics and/or hydraulics preferred., • Forklift /scissor lift driver’s certification is a plus but not a requirement. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined t

Job DescriptionPosition Summary We are seeking a compassionate and reliable Licensed Practical Nurse (LPN) to join our Adult Medical Day Care team on a part-time basis. The LPN will provide direct nursing care, support participant health needs, and work collaboratively with the interdisciplinary team to ensure a safe and supportive environment for our participants. Key Responsibilities • Provide routine nursing care and monitoring of participants, • Administer medications and treatments as ordered, • Assist with assessments, documentation, and care plan updates, • Monitor vital signs and report changes to supervising RN/physician, • Respond to participant health concerns and emergencies, • Maintain accurate and timely medical records, • Support a positive, respectful, and culturally sensitive environment Qualifications • Current New Jersey LPN license in good standing, • CPR/BLS certification (or willingness to obtain), • Experience in adult day care, geriatrics, or long-term care preferred, • Strong communication and teamwork skills, • Ability to multitask in a fast-paced environment Preferred Skills We strongly encourage applicants who are multilingual, especially those fluent in: • Mandarin, • Korean, • Russian

Job DescriptionDescription: Jimmy’s Gourmet Bakery is looking for a skilled Maintenance Mechanic to join our Maintenance/Engineering team in East Brunswick, NJ. The Maintenance Mechanic will be responsible for maintaining, troubleshooting, and repairing production equipment to help ensure safe, efficient, and reliable plant operations. The ideal candidate has experience working with electrical and mechanical systems, enjoys troubleshooting equipment issues, and can perform preventative maintenance in a fast-paced manufacturing environment. Requirements: • Troubleshoot electrical, mechanical, pneumatic, and hydraulic systems on production equipment., • Perform routine preventative maintenance to keep machinery operating efficiently., • Repair and replace machine components, including bearings, filters, wiring, valves, gauges, and switches., • Diagnose equipment issues by inspecting machinery and identifying the root cause of malfunctions., • Read and interpret electrical and mechanical drawings., • Work with production equipment operating at voltages up to 480V., • Complete assigned work orders using a computerized maintenance management system (CMMS)., • Perform machine safety checks and complete required process documentation., • Test equipment after repairs to ensure proper operation., • Recommend equipment and process improvements to support productivity and quality., • Maintain accurate maintenance records and communicate outstanding issues between shifts., • Follow all safety procedures, GMPs, and applicable OSHA requirements., • Maintain a clean and organized maintenance workspace., • Be available for overtime and on-call support as needed to address equipment breakdowns and maintain production. Qualifications • High school diploma or equivalent required., • Experience troubleshooting and repairing industrial production equipment., • Experience working with equipment up to 480V required., • Ability to read and interpret electrical and mechanical drawings., • Basic proficiency in Microsoft Word, Excel, and Outlook., • Strong troubleshooting, problem-solving, and communication skills., • Ability to work independently and collaboratively in a manufacturing environment., • NJ Boiler License preferred but not required. Our Commitment to You At Jimmy's Gourmet Bakery, we believe our team's success starts with feeling valued and supported. That's why we offer: • Competitive pay and performance bonuses, • 401(k) with company match, • Health, dental, and vision insurance, • Company-paid life insurance and EAP support, • Generous PTO and career growth opportunities Join a team that values your contributions and well-being.

Job Description MECHANICS NEEDED - $1,000 signing bonus for forklift mechanics certified on competitive equipment! We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 1-year experience. We Service NY, NJ & Eastern PA Founded in 1977, C&C Lift Truck, Inc. has continuously grown over the last 49 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience level Forklift Mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment. C&C Offers: • Union Pension Plan, • Medical, Dental, Vision benefits available, • Vacation Time, • Retirement Plan Opportunities, • Overtime Opportunities, • Competitive wages, • Supplemental Pay (bonus pay, commission pay, signing bonus), • Referral Bonus Program Primary Responsibilities: • Job will require IC and Electric truck repairs, • Complete scheduled PM and repair assignments within the time frame allotted, • Track van inventory to meet PM schedule, • Perform routine forklift maintenance, • Use diagnostic tools to test forklift components, • Perform quality inspections Skills Required: • The ability to work in all types of weather conditions, • The ability to stand and walk for long periods of time, • Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job, • Employee must be able to communicate effectively with management, customers, and other employees, • Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks, • Employee must be able to analyze information and write a diagnosis on work orders, • The ability to decipher different colors, • Must be able to work individually and as a team Qualifications: • Prefer 1 or more years' experience as a heavy equipment mechanic or related mechanic jobs, • Valid Driver’s license with a good driving record, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Valid Driver’s license with a good driving record, • Ability to lift 50 lbs., • Willingness to learn, • Ability to thrive in a fast-paced environment Schedule: Monday - Friday, 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to submit to drug screening and motor vehicle background checks. We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Job Title: Forklift Mechanic (Propane & Diesel Experience) Company: OEG Building Materials FLSA Status: Non-Exempt Job Type: Full-time Reports To: Department Manager Job Summary: OEG Building Materials, a steel manufacturing company, is seeking an experienced Forklift Mechanic to inspect, maintain, and repair propane and diesel-powered forklifts. The ideal candidate will have strong mechanical and troubleshooting skills, a solid understanding of safety standards, and the ability to work independently in a fast-paced manufacturing environment. Key Responsibilities: Diagnose, repair, and perform preventive maintenance on propane and diesel forklifts Troubleshoot mechanical, electrical, hydraulic, and fuel system issues Perform routine inspections to ensure equipment is safe and operational Replace or repair engines, transmissions, brakes, steering systems, and other components Maintain accurate service and maintenance records Ensure compliance with OSHA and company safety standards Respond to equipment breakdowns in a timely manner to minimize downtime Communicate repair needs and recommendations clearly with management Qualifications & Requirements: Proven experience as a forklift mechanic or heavy equipment mechanic Hands-on experience with propane and diesel forklifts (required) Strong knowledge of mechanical, hydraulic, and electrical systems Ability to read and interpret service manuals and schematics Valid driver’s license (forklift certification a plus) Ability to lift up to 50 lbs and work in a warehouse or outdoor environment Strong attention to detail and problem-solving skills Preferred Qualifications: Trade school or technical certification in mechanical repair Experience with multiple forklift brands Welding or fabrication experience a plus Work Environment & Schedule: Warehouse/industrial setting Full-time (schedule may vary based on operational needs) Compensation and Benefits Pay: $25.00 - $32.00 per hour (non-exempt) Health Insurance (details provided upon hire), Medical, Vision, Dental 401(k) with 4% company match Company Holidays + Jewish Paid Holidays 5 Sick Days (accrued annually) 5 Vacation Days (after 3 years of service)

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Maintenance (PKG.) Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Packaging Mechanic is responsible for operating, maintaining, troubleshooting, and repairing packaging lines and auxiliary equipment (e.g. fillers, cappers, labelers, cartoners, sealers, conveyors, etc.). On higher levels, the role involves preventive maintenance, changeovers, and acting as a technical leader on the packaging floor. Areas of Responsibility Level 1 – Mechanic, Maintenance (PKG.) Mechanic supports routine maintenance, equipment cleaning, basic setup, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to packaging maintenance, this role focuses on learning and executing tasks safely and accurately. Operates under close supervision, handling routine maintenance tasks such as cleaning, basic setups, and minor repairs. Escalates complex issues to higher-level technicians. Key Responsibilities: • Assist with setup, changeovers, cleaning, and basic operation of packaging lines., • Load materials (labels, cartons, films) into packaging equipment., • Perform basic visual inspections, detect packaging defects, and remove faulty units., • Assist in daily cleaning, line sanitation, and housekeeping., • Follow standard operating procedures (SOPs), batch records, and safety protocols., • Document basic packaging metrics, logs, and shift records., • Escalate technical issues to higher‑level technicians., • Assist in minor mechanical adjustments (e.g. tightening bolts, replacing belts) under supervision., • Participate in safety and quality training. Level 2 – Mechanic, Maintenance (PKG.) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, perform machine change overs and setup and perform limited repairs . Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Independently perform maintenance, troubleshooting, and repair on packaging lines including blister, bottle, cartoning, and label printing systems., • Diagnose mechanical, electrical, pneumatic, and control system issues (motors, drives, sensors, solenoids, PLC I/O) on packaging equipment., • Execute changeovers and line reconfigurations, calibrations, and adjustments for product format changes., • Perform preventive maintenance and predictive maintenance tasks, identifying worn parts and scheduling replacements., • Read and interpret mechanical drawings, electrical schematics, and wiring diagrams., • Mentor Level 1 technicians, guiding and reviewing their work., • Assist in packaging reliability improvement initiatives, root cause analyses, and process optimization., • Support emergency breakdowns and unscheduled repairs to minimize downtime., • Participate in regulatory and safety audits related to packaging lines. Level 3 - Mechanic, Maintenance (PKG.) Mechanics are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Operates independently with full responsibility over packaging line performance. Handles advanced diagnostics, major repairs, preventive maintenance programs. Makes judgment calls on repair vs replace. Leads projects, supports regulatory compliance, and provides technical leadership. Works with the engineerign team in identfying and proposing process improvements and in maintaining adequate critical spare parts as well as consumables. Key Responsibilities: • Lead maintenance, upgrade, and optimization of complex packaging lines (blister, bottle, cartooning, label printing, IFC lines)., • Perform advanced diagnostics, root cause analysis, and system redesigns to improve reliability and throughput., • Take full responsibility for major line failures and coordinate cross‑functional resources to resolve issues., • Plan and execute capital projects, line changeovers, expansions, and line integrations., • Act as technical liaison with vendors, OEMs, contractors, and internal engineering groups., • Develop and manage preventive and predictive maintenance programs., • Mentor, train, and coach Level 1 and Level 2 technicians., • Participate in regulatory inspections and ensure compliance documentation., • Recommend equipment upgrades, modifications, or replacements., • Lead packaging continuous improvement initiatives (OEE improvements, downtime reduction). Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (PKG.) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • Forklift experience is a plus. Level 2 – Mechanic, Maintenance (PKG.) • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • 1+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred. Level 3 – Mechanic, Maintenance (PKG.) • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • Trade certifications in HVAC, electrical, pneumatics, or hydraulics are highly preferred. Certifications, Licenses, Credentials: • License or certifications in electronics, pneumatics and/or hydraulics preferred., • Forklift /scissor lift driver’s certification is a plus but not a requirement. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Able to read from schematics and blueprints. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor t

Job Description Overview Avanath is proud to be named one of the top property management companies that provide affordable housing for the workforce. Cultivating the American Dream is the purpose that binds the team. At Avanath, every day is an opportunity to make a difference in someone's life. Whether helping residents call one of our communities' homes, providing excellence in customer service, or championing our workforce, we are committed to creating an unforgettable experience as a great place to live, work, and be. The Role: The Maintenance Apprentice is an essential member of the maintenance team, directly reporting to the Community Manager. This role demands a high level of professionalism, effective communication, and positive interactions with both residents and staff. A proactive approach is critical to preserving the property's appearance and ensuring its smooth operation. The successful candidate will be entrusted with various responsibilities, including performing minor repairs, efficiently managing time, and prioritizing tasks to maintain the property to the highest standards for the benefit of residents. The incumbent in this role must possess high professionalism and positive engagement for our residents and the workforce. Qualifications • 2+ years of grounds or porter experience., • Knowledge of and ability to safely operate property maintenance equipment (e.g., pressure washer, leaf blower, snowblower)., • Ability to perform minor maintenance and repairs as needed., • Detail-oriented and thorough., • Strong time management and organizational skills to handle multiple tasks efficiently., • Ability to work independently and as part of a team in a fast-paced environment., • Thorough understanding of safety hazards and proper use of various cleaning and sanitizing solutions., • Good interpersonal skills with polite and courteous demeanor toward staff, prospects, residents, vendors, and all visitors of the property., • Must have basic knowledge of Fair Housing Laws and OSHA requirements., • High School Diploma or equivalent Key Accountabilities + Customer Service and Maintenance • Provides exceptional customer service with every interaction and delivers high-quality maintenance service., • Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem and making repairs in accordance with established policies, procedures, safety standards, and code requirements., • Completes the "make-ready" process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a "punch" list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work., • Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed., • Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use of tools and equipment. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management., • Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property's maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs. + Adherence to Property Management Rules, Regulations, and Guidelines • Practices proper safety techniques in accordance with Company, property, and departmental policies, procedures, and standards by immediately reporting any mechanical or electrical equipment malfunctions, employee/visitor/resident injuries or accidents, or other safety issues to the appropriate individual(s)., • Complies with Avanath's safety and risk-management policies by attending and participating in the property's routine safety meetings, completing required training on OSHA and other safety-related laws and requirements, and reporting accidents and incidents promptly and accurately., • Follows established policies and procedures by monitoring and ensuring compliance with regulatory requirements, organizational standards, and operational processes related to area(s) of responsibility and reporting violations or infractions to appropriate individual(s)., • Conduct all business in accordance with company policies and procedures, Fair Housing, Americans with Disabilities Act, and all other laws pertaining to the apartment industry. + Physical Demands & Working Conditions • The incumbent in this position is classified as essential staff and is expected to report to work and adhere to all safety and business protocols., • May be required to report to work during inclement weather conditions., • Frequent standing and walking., • Reading, comprehending, writing, performing calculations, and communicating verbally., • May work in an elevated site, may walk on uneven ground., • Occasional squatting, bending neck/waist, twisting neck/waist, pushing, and pulling., • Maybe required to travel to sister communities to provide maintenance support. How Avanath Supports You We know that our teams are at the heart of our success and growth, and we are committed to showing our appreciation. We offer: • Culture Built on Purpose and Core Values - A Commitment to Integrity, A Spirit of Caring, and A Focus on Continuous Improvement., • Comprehensive Benefits – health, dental & vision, 401(k), personal time off, paid holidays and more!, • Growth that is based on achievement and an emphasis on promoting from within our ranks versus just external candidates., • Development – a commitment to creating opportunities to learn and expand your knowledge in the industry, from online training platforms to training classes to one-on-one coaching. Diversity & Inclusion Avanath Capital is committed to fostering, cultivating, and preserving a culture of diversity, equity, and inclusion. Our human capital is the most valuable asset we have, and Diversity, equity, and inclusion ("DEI") are at the very core of Avanath's operating and investment philosophy. We believe that bringing together people with diverse thoughts, backgrounds, talents, and experiences at all levels of our organization, including the executive team, enables us to proactively and creatively achieve our mission to enable opportunities for hard-working American families. The collective sum of the individual differences, life experiences, knowledge, inventiveness, innovation, self-expression, unique capabilities, and talent that our employees invest in their work represents a significant part of our culture, our reputation, and our achievements. We embrace and encourage our employees' differences in age, color, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. Our organization's diversity initiatives include—but are not limited to—our practices and policies on recruitment and selection, compensation and benefits, professional development and training, promotions, transfers, and the ongoing development of a work environment built on the premise of gender and diversity equity that encourages and enforces: + Respectful communication and cooperation between all employees. + Teamwork and employee participation, permitting the representation of all groups and employee perspectives. + Work/life balance through flexible work schedules to accommodate employees' varying needs. + Employer and employee contributions to the communities we serve to promote a greater understanding and respect for diversity. #EST Compensation Range Compensation Range $18.40—$18.40 USD

Job DescriptionDescription: Job Summary: The Utility Mechanic is responsible for carrying out the routine facility maintenance and repairs of such things as broken or burnt out lighting, relocating furniture, trash removal, grounds clean up, etc. Essential Functions: • Perform general building maintenance including but not limited to:, • replacement of burnt bulbs, lighting fixtures, • relocating furniture or office equipment, • trash removal, • cleaning of production area floor, • grounds clean up, • painting of facility walls, • assist with replacement of doors, electrical wiring, etc as needed, • Maintain organized work area., • Operate power tools and other required equipment in accordance to OSHA and company safety standards., • Complete assigned repairs in a timely manner & according to Company standards., • Notify supervisor of needed repairs or areas of maintenance concern., • Other duties as assigned. Requirements: Required Skills & Abilities: • Good working knowledge and skill in techniques and procedures required for repair and maintenance of facilities requirements., • Good communication, basic math, organizational and, decision-making skills required., • Must be able to work independently and efficiently in an often fast-paced environment, and positively contribute to team working environment. Physical Requirements: Uniform: Associates will be issued and required to wear a standard uniform in accordance with the company’s dress code policy. PPE: Protective equipment is available and will be required to be worn as the situation dictates. While performing the duties of this position, associates will be required to stand, sit and/or walk up and down stairs/steps repeatedly throughout most of the workday. While performing the duties of this position, the use of the computerized system/software is required. When in plant, the incumbent is subject to the outside environment with possible exposure to extreme temperatures (heat, cold, humidity, etc) and precipitation. Normal lifting of up to 75 pounds is possible. Mobility is necessary in order to perform assigned functions. Noise level is moderate to heavy as the work area is a production environment. Position requires working the necessary amount of hours needed to complete all position-related tasks or assignments on a timely basis. Required Credentials: • High School diploma or GED required., • One year of experience in a maintenance field required. Production related experience a plus. Disclaimer: This description does not state or imply that the duties listed above are the only duties to be performed by the Associate. Associates are required to follow job-related instructions and perform other job-related activities requested by their supervisor. All requirements are subject to possible modifications in order to provide a reasonable accommodation to individuals with physical or mental disabilities as defined in the Americans with Disabilities Act. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other Associates. Nixon Medical is an equal opportunity employer. #IND1

Job DescriptionMaintenance Floater Complete Care | Full-Time Hourly Position Support Multiple Skilled Nursing Centers Across New Jersey Complete Care is seeking a dependable, skilled, and motivated Regional Maintenance Assistant to support our skilled nursing and rehabilitation centers throughout Monmouth, Essex, Union, Somerset, Middlesex, and Mercer Counties. This is an excellent opportunity for a hands-on maintenance professional who enjoys variety in their workday, takes pride in keeping buildings operating safely and efficiently, and thrives in a fast-paced environment. The ideal candidate is highly organized, can multitask between projects and facilities, and is willing to respond to urgent maintenance needs when necessary. Our residents are valued members of our extended family, and maintaining a safe, comfortable, and well-functioning environment is essential to the quality care we provide. Responsibilities: Perform preventative maintenance and routine repairs on facility equipment and systems Troubleshoot and repair electrical, plumbing, HVAC, mechanical, and building-related issues Complete general maintenance tasks including carpentry, painting, drywall repair, and equipment maintenance Assist with facility inspections and ensure compliance with safety standards Respond promptly to maintenance requests and emergency situations Travel between facilities throughout Monmouth, Essex, Union, Somerset, Middlesex, and Mercer Counties Manage multiple projects and priorities across various locations Maintain a clean, safe, and organized work environment Work independently while collaborating with facility leadership and team members Complete additional duties as assigned by the Maintenance Director or Administrator Qualifications: High School Diploma or equivalent required Maintenance, handyman, facilities, construction, or building operations experience required Long-term care, healthcare, skilled nursing, or senior living experience is preferred but not required Strong working knowledge of HVAC, electrical, plumbing, carpentry, and mechanical systems HVAC, electrical, plumbing, or trade certifications preferred Must possess a valid driver's license and reliable personal vehicle Ability to travel regularly between assigned facilities Strong troubleshooting, organizational, and time-management skills Ability to multitask and prioritize competing demands Computer proficiency preferred Dependable, professional, and team-oriented Schedule: Full-Time Hourly Position Primarily Day Shift Hours Flexible schedule required to support multiple centers Participation in emergency on-call rotation required Must be available to assist facilities during evenings, weekends, and off-hours emergencies when needed Benefits: Competitive Hourly Pay Work Today, Get Paid Today Option Available Health, Dental, and Vision Insurance Paid Time Off (PTO) Career Advancement Opportunities Supportive Leadership Team Opportunity to Make a Meaningful Impact Across Multiple Centers Why Join Complete Care? At Complete Care, your work directly impacts the comfort, safety, and well-being of our residents and staff. You'll have the opportunity to work across multiple facilities, expand your maintenance expertise, and become a valued member of a growing healthcare organization. Apply today and join the Complete Care team. Complete Care is an Equal Opportunity Employer. #LI-JG1

Job Description Job Summary: We are seeking a reliable and detail-oriented Part-Time Commercial Building Maintenance Technician to help ensure our facility remains safe, and fully operational. The ideal candidate will have a strong work ethic, basic maintenance skills, and the ability to work independently. Position is for weekend night shifts, approximately 5pm-12pm. Key Responsibilities: • Perform routine maintenance tasks including minor repairs, and basic plumbing/electrical knowledge., • Conduct regular inspections of the building to identify and address maintenance needs, • Monitor building systems (HVAC, lighting, etc.) and report issues promptly, • Respond to maintenance requests in a timely manner, • Ensure compliance with safety standards and procedures, • Assist with seasonal tasks such as snow removal Qualifications: • Previous maintenance or facilities experience preferred, • Basic knowledge of plumbing, electrical, and general repair work, • Ability to use hand and power tools safely, • Strong attention to detail and problem-solving skills, • Ability to lift up to 50 lbs and perform physical tasks, • Reliable transportation and punctuality required Preferred Skills: • Experience working in commercial or office buildings, • Familiarity with maintenance tracking systems, • Flexibility to handle occasional emergency calls Perks & Benefits: • Complimentary meals during shifts, • Paid sick time, • 401(k) eligibility Compensation: • $25.00 an hour We are an equal opportunity employer and encourage applicants from all backgrounds to apply.

Role: Laboratory Tech Department: Quality Control Reports to: Laboratory Supervisor FSLA Status: Hourly (Non-Exempt) Pay Range: $24.00/hour- $30.00/hour CORE RESPONSIBILITIES • Contribute to the overall operations of the lab and to the achievement of departmental goals and objectives., • Perform laboratory support functions such as:, • Clean, sterilize, and put away glassware, lab equipment and instruments., • Maintain inventory management and equipment calibration., • Prepare and weigh product samples., • Perform routine testing activities., • Adheres to and understands the importance of Good Manufacturing Practices and standard operating procedures, including Good Documentation Practices, • Attend daily lab meetings on a regular basis and escalate issues/concerns at that forum to the supervisor for further investigation., • Demonstrates ability to analyze results according to specifications listed in test methods and ability to distinguish when criteria are and/or are not met, • Document results pertaining to chemical content and other characteristics., • Support with professional, proactive communication with cross-functional teams (i.e., providing updates, details regarding testing, workload, scheduling, etc.), • Receive Samples and batch records for the Laboratory, • Record information from the batch record into Lab Scheduling software and assign testing requirements., • Create Certificate of Analysis for the lots tested. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Associate's degree(A.A.) is preferred, along with six months to two years of related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. CERTIFICATES, LICENSES,REGISTRATIONS PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and reach with hands and arms. The employee frequently is required to stand, walk, sit, talk or hear, and taste or smell. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually quiet. Spectrum Chemical Mfg. Corp. is an Equal Opportunity Employer. We value diversity and do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.

Associate Veterinarian | $110,000-$140,000 | Schedule Flexibility | Old Bridge, NJ Some practices talk about culture. We actually have one. Route 516 Animal Hospital is hiring an Associate Veterinarian in Old Bridge, NJ - and we are looking for someone who wants to work somewhere that actually feels good. We lead with calm, we laugh together, and we believe great veterinary medicine happens when everyone feels like they belong. No egos. No drama. Just authentic communication, top-notch care, and a team that shows up for each other every single day. We are an AAHA-accredited small animal hospital - and if you know, you know. That accreditation is not handed out. It means we hold ourselves to the highest standards in veterinary medicine, and we are proud of it. Whether you are an experienced Veterinarian ready for a fresh start or a new graduate Veterinarian ready to grow, we want to hear from you. Our Culture - The Real Stuff We are not going to list buzzwords. Here is what it actually looks like to work here: • We lead with calm - stressful days happen in vet medicine, and we handle them together, • We laugh - a lot. The team has fun and that energy shows in how we care for our clients and patients, • Everyone is part of the team - from the front desk to the treatment room, every person matters here, • No egos - we communicate openly and support each other, • Top-notch care is non-negotiable - AAHA accreditation is our baseline, not our ceiling Schedule and Work-Life Balance • Flexible scheduling - we will work with you to build something that actually fits your life, • Never open Sundays - that day is yours, guaranteed, • Full-time and part-time options both considered, • Weekday flexibility available for personal appointments, • Stable, predictable hours so you can make plans and keep them Compensation Designed Around Your Goals Earn in a way that works for you. Whether you value the predictability of salary ($110,000-140,000) or the earning potential of production, we'll work with you to create a compensation package that aligns with your goals. • 22% Professional Services | 10% In-Practice Pharmacy | 5% Online Pharmacy With no negative accrual, you can enjoy the upside of production without the stress of carrying a future repayment balance. Along with competitive compensation, you'll have access to leadership development, professional growth opportunities, robust benefits, and support designed to help you make a lasting impact on your team, patients, and community. Benefits: • CE Allowance + Encore Performance Academy, • Health, Dental, Vision and Pet Benefits, • 401(k) with up to a 5% match., • Paid parental leave and holiday pay., • Professional dues coverage and company paid VIN membership Mentorship and Support We know that coming out of vet school is a lot. We have built real support around our associate veterinarians: • Dedicated in-practice mentorship from our experienced lead veterinarian, • Support from a senior mentor for case guidance - any case, no judgment, • Regular check-ins and a structured onboarding experience so you never feel dropped in the deep end, • Access to Encore's MentorCore program, purpose-built to help new grads build confidence and clinical skill, • Access to Encore Performance Academy trainings and CE support, • A team that genuinely wants to see you succeed - and will tell you so The Area - New Jersey Has a Lot Going On Old Bridge is a great place to land. You are about 20 minutes from the Jersey Shore with beaches, boardwalks, and waterfront restaurants stretching from Point Pleasant down to Cape May. Cheesquake State Park is right here in town, and Six Flags Great Adventure, the Delaware Water Gap, and Mountain Creek are all within easy reach for weekends off. If the city is more your speed, there are two ferry options nearby that get you into Manhattan in about 45 to 60 minutes - without the commute stress. Philadelphia, DC, and Boston are all within a few hours. Basically, you can be anywhere you want to be on your days off, and Old Bridge is a comfortable, affordable place to come home to. What We're Looking For: • US licensed DVM (or DVM Equivalent) driven to make a difference in animal healthcare., • Confident in diagnostics, treatment planning, and performing routine surgeries and dental procedures., • Enthusiastic about building client relationships and contributing to a collaborative team environment., • Eager to be part of a community-focused hospital that values your contributions and professional growth., • Passionate not only about animal care, but also building up others, mentoring and continuing education. Ready to Stop Scrolling? If this sounds like the kind of veterinary practice you have been looking for, we want to hear from you. Tell us a little about yourself - what kind of schedule works for your life, what you love about veterinary medicine, and what would make you excited to pull into our parking lot on a Monday morning. We promise the team will make it worth it. Contact Sue Harley sue.harley@encorevet.com Book a time to chat: _ Check us out here: www.rt516vet.com.com Route 516 Animal Hospital is proud to be partnered by Encore Vet Group– see what that means for you: _ Encore Vet Group is a community of veterinary hospitals that share a passion for the profession and a strong commitment to those who provide veterinary care. We are dedicated to a great culture, strong leadership, and high-quality medicine. Veterinary practice success doesn’t happen without these key ingredients. Our hospitals maintain the culture and atmosphere of a private veterinary practice while gaining access to collective resources and veterinary business management expertise to help lead their teams forward and shape their future. Whether you're a veterinarian, technician, or support staff, our focus is to support you in doing what you love — caring for animals while advancing your career.

Pride Health is hiring a Phlebotomist to support our client’s medical facility based in Edison, NJ 08837. This is a 3 months assignment (Possibility of extension or conversion) opportunity and a great way to start working with a top-tier healthcare organization! Job Details: Job Name: Phlebotomist Location : Edison, NJ 08837 Duration : 03 months Contract (Possibilities of extension) Shift : M-F 9-5, Sat 9-1 Payrate : $24-26/hr. on w2/Pay Rate is based on experience and educational qualifications. Job Details: • The Patient Services Representative I(PSR I) represent the face of our company to patients who come in, both as part of their health routine or for insights into life-defining health decisions., • The PSR I draws quality blood samples from patients and prepares those specimens for lab testing while following established practices and procedures., • The PSR I has direct contact with patients and creates an atmosphere of trust and confidence while explaining procedures to patients and drawing blood specimens in a skillful, safe and accurate manner., • The PSR I will demonstrate Leadership Behaviors while focusing on process excellence skills and sensitivity to confidentiality and accuracy to patient information. Successful applicants may be assigned to a doctor's office, a patient service center or as business needs dictate., • Under the direction of the area supervisor, perform daily activities accurately and on time. Job Responsibilities: • Ability to provide quality, error free work in a fast-paced environment., • Ability to work independently with minimal on-site supervision., • Excellent phlebotomy skills to include paediatric and geriatric., • Flexible and available based on staffing needs, which includes weekends, holidays, on-call, and overtime. Job Requirements: • Ability to provide quality, error free work in a fast-paced environment., • Ability to work independently with minimal on-site supervision. Excellent phlebotomy skills to include paediatric and geriatric., • Flexible and available based on staffing needs, which includes weekends, holidays, on-call, and overtime. Education: • High school diploma or equivalent., • Medical training: medical assistant or paramedic training preferred., • Phlebotomy certification preferred (Required in California, Nevada, and Washington). Work Experience: • Minimum of 6 months experience., • One(+) years phlebotomy experience preferred., • Customer service in a retail or service environment preferred., • Keyboard/data entry experience a must. Pride-Health offers eligible employee’s comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, pet insurance and employee discounts with preferred vendors. Equal Employment Opportunity Pride-Health is an equal opportunity employer. We do not discriminate on the basis of the race, religious creed, color, national origin, ancestry, physical disability, mental disability, reproductive health decision making, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, age, sexual orientation, veteran or military status, or any other characteristic protected by applicable federal, state, or local law. Fair Chance Employment Pride-Health is a Fair Chance employer. We consider all qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local Fair Chance laws and ordinances, including, the California Fair Chance Act and all applicable local Fair Chance ordinances. Accommodations We are committed to providing reasonable accommodations to applicants and employees with disabilities. If you require a reasonable accommodation to participate in the application or interview process, or to perform the essential functions of this role, please contact us. Only applicable for San Francisco Candidates: Under the San Francisco Lactation in the Workplace Ordinance, we will provide written notice of lactation accommodation rights, and this notice will automatically be given upon hiring, any inquiry of parental leave or lactation accommodation. Only applicable for Kentucky positions: For this type of employment, state law requires a criminal record check as a condition of employment. This applies to direct care staff (Examples: RN, LPN, Nurse Aides, Therapists) referred to Kentucky nursing facilities, assisted living communities, or long-term care facilities, in accordance with KRS 216.793.

About CLS: CLS is the trusted party at the centre of the global FX ecosystem. Utilized by thousands of counterparties, CLS makes FX safer, smoother and more cost effective. Trillions of dollars’ worth of currency flows through our systems each day. Created by the market for the market, our unrivalled global settlement infrastructure reduces systemic risk and provides standardization for participants in many of the world’s most actively traded currencies. We deliver huge efficiencies and savings for our clients: in fact, our approach to multilateral netting shrinks funding requirements by over 96% on average, so clients can put their capital and resources to better use. CLS products are designed to enable clients to manage risk most effectively across the full FX lifecycle – whether through more efficient processing tools or market intelligence derived from the largest single source of FX executed data available to the market. Job information: • Functional title – Assistant Vice President, • Department – Compliance Risk Management, • Corporate level – Assistant Vice President, • Report to – Director, Compliance Risk Management, • Location – Iselin, New Jersey, • Expected full-time salary range between $136,000 - $159,000 + variable compensation + 401(k) match + benefits., • Note: Disclosure as required by NY Pay Transparency Law of the expected salary compensation range for this role. What you will be doing: • Provide day-to-day internal support to the Regulatory Compliance team on routine queries, directing and escalating more complex or sensitive issues to senior advisors as appropriate., • Support the annual Compliance Risk Assessment by data gathering, updating assessment templates, and helping prepare materials for senior management review., • Assist in the execution of BAU monitoring and control testing activities (e.g. sample checks, QA reviews), performing defined testing steps, documenting results, and drafting clear summaries for review., • Provide review and challenge of policies and procedures ensuring they are current and aligned with regulatory requirements and internal standards., • Prepare and maintain regular reporting and management information on compliance matters, supporting reporting into relevant committees and governance forums., • Support regulatory change activities impacting CLS by assisting with impact assessments, documenting requirements, and helping to embed changes into policies, procedures, and internal frameworks., • Perform horizon scanning for regulatory and industry developments relevant to CLS, logging developments and helping draft internal summaries., • Provide general support to the Compliance Risk Management Advisory including maintaining trackers, logs, and shared documentation and contributing to process improvements. What we’re looking for: • Prior experience in regulatory compliance and/or finance crime compliance, or related role within financial services or a regulated environment., • Comfortable working with stakeholders with good organizational skills for managing multiple workstreams and deadlines., • Prior experience supporting internal audit engagements and remediation efforts. Knowledge of a financial market utility or FMU regulatory environment, key legislative requirements and practical implications would be beneficial., • Prior experience interfacing with banking regulators would be beneficial., • Understanding of payments and foreign exchange markets a plus., • Ability to manage urgent requests in a timely manner., • Excellent verbal and written communication skills., • Self-starter with the ability to work independently and proactively solve problems., • High level of attention to detail., • Willing and enthusiastic about learning and committed with a desire to succeed. Professional qualifications / certifications • Minimum bachelor’s degree; Postgraduate degree (e.g., JD, MBA) or compliance / testing / audit certifications a plus, • 5-7 years professional experience in Regulatory Compliance / risk management in Banking/Financial Services., • Strong analytic capabilities; excellent communications skills to influence stakeholders, • Ability to work independently (with limited direct authority) to assess and identify gaps and influence outcomes, • Advanced proficiency in Microsoft Office applications (Word, Excel and PowerPoint). Familiarity with Governance, Risk & Compliance (GRC) tools (e.g., Archer) a plus, • Progress towards, or interest in, a relevant professional qualification (e.g. ICA, CAMS) is desirable but not essential., • Proficiency in regulatory requirements e.g. Prudential, BSA/AML, Privacy, • Knowledge of a Financial Market Utility regulatory environment, key legislative requirements and practical implications would be beneficial Our commitment to employees: We are a small company with a big mandate, so every person is essential to our success. We are also committed to employing and retaining the most talented and dedicated people. What makes us interesting goes beyond our competitive salaries and great benefits. Our work environment is designed around quality outcomes, not output. The FX market would cease to function without our services, and we take pride in being responsible for keeping it running smoothly. We are different from other financial institutions in that we have a flatter and more transparent structure, with accessible leadership. You will be seen, heard and empowered to develop your career. We are a purpose-driven organization, with an inclusive culture that focuses on doing what is right. The well-being of our people is as important to us as the resilience of our systems. In addition to encouraging our people to ‘locate for their day,’ we run a range of initiatives that support a sense of belonging, as well as physical, emotional and mental well-being. Our extensive benefits for employees typically include: • Vacation/annual leave: 25 days in UK/Asia + 3 life days, 23 in US + 3 life days, • Private medical and dental cover and life insurance, • Generous pension contributions in the UK and Asia; matching 401(k) in the US, • Paid volunteer days, • ‘Locate for your day’ hybrid working - 2 days a week in office, • Access to Discover – our learning platform with 1000+ courses from LinkedIn Learning, • Paid parental leave / Coaching and support services, • Career development / LinkedIn Learning, • ‘Heads down days’ with no meetings on the last Friday of every month, • Wellbeing / Mental health support, • Employee Networks (Black Employee Network, Parents & Caregivers Network, Pride Network, Sustainability Network, Veterans Network, Women’s Forum), • Social events Awards: • The Sunday Times Best Places to Work 2023, 2024, 2025 / Big Company / The Sunday Times Awards, • Third place in Britain’s Healthiest Workplace 2022 / Medium Company / Vitality Awards

About CLS: CLS is the trusted party at the centre of the global FX ecosystem. Utilized by thousands of counterparties, CLS makes FX safer, smoother and more cost effective. Trillions of dollars’ worth of currency flows through our systems each day. Created by the market for the market, our unrivalled global settlement infrastructure reduces systemic risk and provides standardization for participants in many of the world’s most actively traded currencies. We deliver huge efficiencies and savings for our clients: in fact, our approach to multilateral netting shrinks funding requirements by over 96% on average, so clients can put their capital and resources to better use. CLS products are designed to enable clients to manage risk most effectively across the full FX lifecycle – whether through more efficient processing tools or market intelligence derived from the largest single source of FX executed data available to the market. Job information: • Functional title – IAM Engineering Lead, • Department - CISO, • Corporate level - Director, • Report to – Head of Security Architecture, Design and Engineering, • Location – Iselin, New Jersey. On site 2 days per week, • Expected full-time salary range between $200,000 - $230,000 + variable compensation + 401(k) match + benefits. Note: Disclosure as required by NY Pay Transparency Law of the expected salary compensation range for this role. What you will be doing: As Head of IAM Engineering, you will lead the strategic design, implementation, and governance of a comprehensive identity and access management program that protects CLS Services' most critical asset: trusted digital identity. This is a hybrid executive and technical role that bridges security, compliance, and business enablement in a highly regulated financial services environment. You will be responsible for architecting and scaling identity systems across our workforce, customers, and machine identities—each with distinct risk profiles and regulatory demands. This includes accelerating onboarding of applications and infrastructure into our IGA platform, expanding our PAM scope to network devices and non-traditional endpoints, building a comprehensive secrets management capability, and embedding AI-assisted automation to reduce manual operational burden while maintaining security and auditability. Key Responsibilities: • Scale application and infrastructure onboarding to IAG through a phased, iterative deployment strategy, prioritizing critical systems and expanding coverage over time to maximize early wins while managing complexity., • Automate provisioning and access reviews using IAG connectors, role-based access control (RBAC) frameworks, and AI-driven workflows to reduce manual errors and accelerate user lifecycle management., • Implement self-service capabilities and identity workflow automation to automate and accelerate onboarding to the IAG platform., • Maintain data quality and integration governance by establishing rigorous data cleansing practices, continuous syncing with authoritative HR systems, and monitoring to ensure accurate, consistent identity and entitlement data., • Where possible Leverage AI and machine learning to generate role recommendations, detect over-permissioning, and automate access certification workflows at scale., • Govern machine identities (workloads, services, future AI agents) through IAG lifecycle management, ensuring all identity types are managed through a unified access governance framework., • Deploy behavioral anomaly detection using AI/ML to identify unauthorized or suspicious IAM activities, including potential abuse by rogue AI agents operating at machine velocity., • Onboard critical device and infrastructure accounts to PAM, including network devices, databases, and cloud infrastructure, implementing just-enough-privilege (JEP) and just-in-time (JIT) access models to reduce standing privileges and blast radius., • Expand PAM scope beyond Linux/Windows to include network devices, databases, cloud infrastructure (AWS), and non-traditional endpoints (operational technology etc.) where applicable to CLS Services' infrastructure., • Where possible Implement JIT and zero standing privileges (ZSP) across PAM-managed resources, restricting privilege duration and scope to specific use cases and time-bound sessions. AI-Assisted IAM Operations • Redistribute high-volume, low-risk IAM tasks to AI agents, such as routine provisioning, deprovisioning, access reviews, and anomaly detection, while maintaining human oversight, exception handling, and strategic decision-making., • Implement AI-driven intelligent recommendations for access reviews, vulnerability remediation, and role engineering to accelerate decision cycles and improve accuracy., • Design and monitor AI agent identity lifecycle management, including provisioning, fine-grained authorization, token monitoring, and continuous audit of AI agent activities to prevent privilege escalation or unauthorized data access. Vendor and Technology Management • Negotiate and manage vendor relationships to ensure technical roadmaps align with CLS Services' strategy, support regulatory requirements, and deliver value. Measurement and Governance • Define and track outcome-driven metrics aligned with business objectives, such as:, • IGA onboarding cycle time and application/infrastructure coverage expansion, • Reduction in identity-related security incidents and unauthorized access events, • PAM scope expansion and just-in-time privilege adoption rates, • User experience and self-service adoption metrics, • AI recommendation accuracy and agent behaviour anomaly detection rates Engineering Leadership & Operating Model • Build and lead a high-performing security engineering function, aligned to product-based delivery., • Help define the target operating model for security engineering, including platform ownership, DevSecOps integration, and automation-first principles., • Establish clear engineering standards, patterns, and reusable security services., • Experience with tooling selection, deployment and vendor management., • Integration of tooling with downstream and upstream systems, • Tooling automation development, • Continuous Tooling Optimization, • Platform Health Monitoring, • Remediation Engineering, • Resiliency Engineering Stakeholder Engagement & Strategy • Work closely and partner with the ED, Head of Identity and Access Management., • Partner with CIO, CISO, heads of technology and senior business leaders to align security engineering initiatives with organizational priorities., • Work closely with the enterprise security architects and solution architects on control gaps, control maturity and business cases., • Translate risk and threat insights into practical engineering outcomes., • Manage vendor relationships and strategic technology partnerships. What we’re looking for: • Senior leadership in security engineering / cyber engineering in complex, regulated environments (markets technology / investment banking / FMI strongly preferred)., • Proven delivery of large-scale security platforms end-to-end (design → build → run), including multi-system integration., • Deep experience identity & privileged access engineering., • Strong track record of regulatory/audit engagement and evidence-based assurance., • Engineering mindset: able to go deep on architecture, automation, telemetry, and operational resilience., • Strategic thinker with the ability to translate vision into execution., • Strong communicator, able to influence at executive level., • Data-driven and outcome-focused, with a bias toward measurable security improvements., • Comfortable operating in fast-paced, evolving environments. Desirable Skills and Experience • SailPoint IGA platform administration and customization (roles, policies, workflows, connectors), • Delinea PAM platform expertise (credential management, session recording, just-in-time workflows), • Cloud infrastructure security (AWS IAM), • Identity and access intelligence (IAI) or AI/ML analytics applied to IAM use cases. Our commitment to employees: We are a small company with a big mandate, so every person is essential to our success. We are also committed to employing and retaining the most talented and dedicated people. What makes us interesting goes beyond our competitive salaries and great benefits. Our work environment is designed around quality outcomes, not output. The FX market would cease to function without our services, and we take pride in being responsible for keeping it running smoothly. We are different from other financial institutions in that we have a flatter and more transparent structure, with accessible leadership. You will be seen, heard and empowered to develop your career. We are a purpose-driven organization, with an inclusive culture that focuses on doing what is right. The well-being of our people is as important to us as the resilience of our systems. In addition to encouraging our people to ‘locate for their day,’ we run a range of initiatives that support a sense of belonging, as well as physical, emotional and mental well-being. Our extensive benefits for employees typically include: • Vacation/annual leave: 25 days in UK/Asia + 3 life days, 23 in US + 3 life days, • Private medical and dental cover and life insurance, • Generous pension contributions in the UK and Asia; matching 401(k) in the US, • Paid volunteer days, • ‘Locate for your day’ hybrid working - 2 days a week in office, • Access to Discover – our learning platform with 1000+ courses from LinkedIn Learning, • Paid parental leave / Coaching and support services, • Career development / LinkedIn Learning, • ‘Heads down days’ with no meetings on the last Friday of every month, • Wellbeing / Mental health support, • Employee Networks (Black Employee Network, Parents & Caregivers Network, Pride Network, Sustainability Network, Veterans Network, Women’s Forum), • Social events Awards: • The Sunday Times Best Places to Work 2023, 2024, 2025 / Big Company / The Sunday Times Awards, • Third place in Britain’s Healthiest Workplace 2022 / Medium Company / Vitality Awards