Trabajos senior electrical engineer en Hoboken, New Jersey - Page 2Crear alertas

Job DescriptionJob Title: Medical Equipment Engineer IIIPosition Summary The Medical Equipment Engineer III serves as a senior technical expert responsible for providing advanced-level installation, troubleshooting, maintenance, and repair of medical and dental equipment both remotely and on-site. This role requires expert technical knowledge, exceptional customer service skills, and the ability to lead and mentor junior engineering staff. The Engineer III acts as a technical escalation point, ensures service excellence, and supervises Medical Equipment Engineer I and II team members while contributing to continuous improvement initiatives and internal training. Key Responsibilities • Provide expert-level technical support for complex dental equipment issues, both remotely and on-site, • Serve as the primary escalation point for unresolved or advanced technical cases from Engineer I and II staff, • Install, configure, inspect, test, and validate advanced dental equipment at customer sites, • Diagnose complex system failures and recommend corrective actions and long-term solutions, • Lead on-site service activities for critical installations, upgrades, retrofits, and major repairs, • Supervise, mentor, and provide technical guidance to Medical Equipment Engineer I & II team members, • Support onboarding and training of new engineers, including field shadowing and skills development, • Review service documentation for accuracy, completeness, and compliance with company standards, • Communicate clearly and professionally with customers, vendors, and internal stakeholders to resolve issues and manage expectations, • Monitor and analyze service metrics such as resolution time, repeat service calls, and customer satisfaction, • Collaborate with engineering, quality, and product teams to provide feedback on equipment performance and design improvements, • Support internal process improvement initiatives and contribute to best-practice development, • Travel regularly to client sites (average 2–7 days per assignment) and provide leadership during multi-day or complex service engagements, • Ensure safe handling, transport, setup, and operation of equipment (up to 50 lbs), • Perform other duties as assigned by managementSupervisory Responsibilities, • Directly supervises Medical Equipment Engineer I and II positions, • Provides performance feedback, coaching, and technical development support, • Assists management with workload planning, scheduling, and skills assessmentsRequired Qualifications, • Associate degree required; Bachelor’s degree in Biomedical Engineering, Electronics, or a related technical field preferred, • 5+ years of hands-on experience servicing medical or dental equipment, with demonstrated advanced troubleshooting expertise, • Prior experience mentoring, leading, or supervising technical staff, • Strong mechanical, electrical, and diagnostic skills across a broad range of clinical equipment, • Proven ability to communicate complex technical information clearly to customers and internal teams, • Excellent customer service, interpersonal, and conflict-resolution skills, • Proficiency in Microsoft Office (Word, Excel, Outlook) and service documentation systems, • Valid driver’s license and ability to travel regularly, • Ability to work independently, prioritize tasks, and manage multiple complex service cases, • Must be able to kneel, bend, stand for extended periods, work in tight spaces, and lift up to 50 pounds

Job Description Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity’s Built Environment division, combining its deep expertise in high-performance building systems with Trinity’s strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B’s capabilities and offers employees: * Access to a broader portfolio of international projects and clients * Enhanced career mobility across Trinity’s global network * Interdisciplinary collaboration with experts in sustainability, environmental science, and digital infrastructure About the Role We are seeking a Senior Project Engineer to join the HVAC department at our New York office. The Senior Project Engineer is a technically skilled and experienced engineer with excellent communication, coordination, project management and leadership skills. This role typically manages one to two smaller projects and is the key designer on larger base-building and infrastructure upgrade projects. Key Responsibilities: • Leads the design on Tenant fit-out projects and is a key designer on base building/infrastructure upgrades; assembles riser diagrams, schedules, and floor plans; participates in specification writing., • Establishes design criteria from the project proposal and assembles basis of design documents., • Assembles a complete set of contract documents for their trade including the lay out main equipment rooms, closets, shafts, risers, etc., • Leads design for their trade’s ancillary systems required for a project and can assemble scope associated drawings with these systems (e.g. UPS, generators, fuel, secondary water pumps, water reclamation system, etc.)., • Reviews shop drawings, RFI’s, Contractor change orders, performs site visits and punch-lists with limited supervision to verify that designs are being implemented accurately., • Assists in establishing an efficient project schedule for his/her project team that ensures appropriate use of resources while adhering to deadlines., • 6-9 years of experience, • Bachelor’s degree in mechanical or electrical engineering, • Strong understanding of trade-specific scope of project, trade-related codes, and the required coordination with other trades., • Strong understanding of documentation requirements and content for each deliverable phase (e.g., SD, DD, CD and specifications)., • Proficient in all design calculations and software tools (e.g., Revit and AutoCAD) applicable to their discipline. Legacy + Innovation: Our company blends a rich history with forward-thinking design, including smart building systems and deep carbon reduction strategies. * Collaborative Culture: With over 400 professionals, our company fosters mentorship, teamwork, and continuous learning. * Global Impact: Now part of Trinity, our company offers opportunities to work on transformative projects across commercial, healthcare, aviation, life sciences, and data center sectors. * Multiple office locations: New York, Boston and Philadelphia. What We Offer * Hybrid workplace offering the flexibility to work both from home and the office * Comprehensive benefits package including 401k employer match and stock options * Paid time off (PTO), volunteer program and employee resource groups * Training and professional development courses through JB&B University Estimated compensation range: $100,000-$115,000 a year Jaros, Baum & Bolles is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR JQhjMmScry

Job Description A client of AlphaStaffHCM is seeking an experienced and talented Senior Hardware Engineer to be part of our hardware development efforts. As a Senior Hardware Engineer, you will be responsible for designing, developing, and testing advanced hardware systems. This position offers a unique opportunity to apply your expertise and skills in a challenging and innovative technology environment. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities: • Support the development of several platforms based around classical and quantum photonics as a senior hardware engineer., • Work alongside other hardware engineers to design custom electronics using Altium Designer., • Evaluate critical component performance via board-level and system-level lab testing (ADCs, DACs, FPGAs, TDCs, etc.), • Work with firmware engineers, software engineers, and quantum scientists during various phases of lab testing., • Work with contract manufacturers during manufacturing phases to procure custom electronics, addressing and mitigating any necessary design changes along the way., • Validate the performance of custom electronics with lab testing. Document any issues uncovered during testing., • Maintain documentation expected at milestone events during the entire design cycle (theory of operations, manufacturing documentation, validation testing results, etc.), • Integrate hardware into the complete system by working closely with mechanical, firmware, and FPGA engineers. Required Skills and Experience: • Bachelor of Science (BS) in Electrical Engineering or Computer Engineering (EE or CE) from an accredited university., • BS in EE or CE and 6+ years of experience or MS EE or CE with 4+ years of experience., • Proven experience designing PCBs from schematic capture, layout design, and review., • Experience with at least one ECAD suite (Altium, OrCAD, Allegro, CircuitMaker, or others) Altium is strongly preferred., • Familiarity with PCB design best practices related to Signal Integrity, Power Integrity, and EMI/EMC compliance., • Strong foundation in PCB design related to DFM, DFT, and DFA best practices., • Strong electrical engineering fundamentals in Analog, Power, and Digital Electronics., • Advanced experience with voltage regulators, LDO, and switch mode power supplies (SMPS)., • Experience with analog electronics design (op-amps, TIAs, filters, etc.), • Experience with digital electronics design (Logic Gates, Flip Flops, Microcontrollers, RAM, ROM, Flash, etc.), • Advanced knowledge of simulation tools such as SPICE., • Strong experience with low to medium-speed digital interfaces and protocols (I2C, CAN, UART, SPI, etc.)\, • Hands-on experience with board bring-up, debugging, testing, and integration with lab instruments such as: DMMs, Oscilloscopes, Logic Analyzers, and Spectrum Analyzers., • Able to code C, C++, MATLAB/Octave, or Python., • Working knowledge of Verilog is a huge plus., • Able to lift weights up to 50lbs (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Additional Preferred Skills: • Master of Science (MS) degree in Electrical Engineering or Computer Engineering (EE or ECE)., • Experience designing electronics with complex computing devices such as FPGAs, MCUs, CPUs, DSPs, etc., • Experience working with optoelectronics., • Experience with high-speed serial protocols (USB, PCIe, Ethernet, etc.), • Experience with RF analog, digital, and mixed-signal electronics., • Experience designing systems to meet compliance and certification requirements (e.g., CE/FCC)., • Experience integrating custom ASICs into designs., • FPGA/SoC/MCU lab validation with lab equipment., • Experience writing low-level firmware (C, Verilog, VHDL, etc.), • Experience with manual board prototyping/refurbing using essential equipment like soldering irons and hot air guns. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job Description FST Technical Services Commissioning (Cx) division is one of the leading Cx firms in the country. We partner with clients for quality assurance in the design, construction, and post-acceptance phases of building projects. We ensure that equipment in mechanical, electrical, plumbing, and associated systems are designed, installed, and functionally tested to meet the clients requirements and design intent. The Senior Engineer will directly be responsible to meet target billable hours as defined by annual operating plan and Regional Director of Engineering. In addition, the individual will focus on providing technical oversight and support to the team within the region. In detail, responsibilities are the following: Essential Functions: • Engineering Mentorship / Leadership, • Provide leadership and support, as assigned, to support the growth and development of other engineering staff members., • Participate in company training and safety initiatives., • Client Maintenance / Quality Assurance, • Involved in high-level client maintenance to provide assurance to all existing clients that the quality of the services delivered are closely examined and under scrutiny., • Working with executive management, directors, team leaders/engineering managers to develop and ensure standards are developed and maintained, specifically in the areas of quality assurance and training., • Revenue Generating Activities, • Support company revenue targets by leading or supporting existing projects as assigned, • Project assignments will be based on areas of expertise, relationship with the client and other strategic client initiatives, • Must be capable of meeting billing utilization targets se, • Business Development, • Support company sales initiatives as requested by the Director of Engineering, • Lead and / or participate in client and educational presentations, trade shows, etc., • Support business plan by initiating and developing new relationships with strategic clients and/or in strategic markets or market sectors., • Any special projects as requiredRequirements:, • Bachelors degree in Engineering, • 8+ years Engineering Experience, • P.E., LEED AP, or CCP a plus, • Excellent customer relation skills, • Strong Communication Skills, • Excellent coach and mentor skills, • Strong financial and analytical skills, • Ability to present in front of a group of people, • Excellent interpersonal skills, • Physical fitness, capable of lifting 30 pounds or more and climbing ladders, • Must be willing to travel across the tri-state area with added flexibility to travel to other regions being an advantagePay range $120,000 - $140,000 based on experience. FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future. Powered by JazzHR vhfqIsCEDz

Job DescriptionYou’ve Never Been Satisfied with "Good Enough." You want to make an impact, not just manage projects, but change how the world gets built. At Accenture Infrastructure & Capital Projects, you’ll do exactly that. You’ll help develop and deliver the factories, grids, transit systems, and public infrastructure that keep communities moving - and do it smarter, safer, and more sustainably than ever before. You’ll work alongside people who think big and act bold - project managers, engineers, technologists, and strategists who blend real-world experience with digital innovation and AI. Together, we’re transforming how capital projects are planned, managed, and executed, creating a better way to build for the future. Because “good enough” builds the past. You’re here to build what’s next, on a team that outperforms every norm. Visit us here to learn more about Accenture Infrastructure & Capital ProjectsAs Accenture continues to grow, you may see a variety of new career opportunities, and depending on the role and location you may be directed to apply through Accenture Infrastructure and Capital Projects LLP or one of our other legal entities - Accenture Infrastructure and Capital Projects, LLC or Accenture Infrastructure and Capital Projects Inc., with benefits varying by country and role, so please check with your recruiter for details.THE WORK: • You’ll build, scale, and lead Accenture I&CP’s Clean Mobility capability on the U.S. East Coast, strengthening market presence, defining growth strategy, and delivering against priority accounts and revenue targets., • You’ll expand Accenture’s leadership in fleet decarbonization and zero‑emission mobility, with a focus on transit agencies, port authorities, municipalities, utilities, and select private‑sector fleet operators., • You’ll originate, shape, and close Clean Mobility opportunities spanning fleet electrification, charging infrastructure, depot modernization, grid interconnection, and long‑term decarbonization roadmaps., • You’ll serve as an executive sponsor for priority clients, building and sustaining senior‑level relationships and positioning Accenture as a trusted partner across the full program lifecycle., • You’ll lead and support business development, capture, and proposal efforts, shaping deal strategy, pricing, teaming models, and differentiated win themes., • You’ll identify emerging policy, funding, and regulatory drivers and translate them into actionable client opportunities and market offerings., • You’ll leverage and grow a strong East Coast Clean Mobility network, using existing relationships while establishing new strategic partnerships., • You’ll collaborate with Accenture’s Industry X, Utilities, Energy, Transportation, and Sustainability teams to bring integrated, cross‑portfolio solutions to market., • You’ll provide executive‑level technical oversight for fleet electrification and charging infrastructure programs, including fleet transition planning, phased deployments, and operational readiness., • You’ll guide charging strategy, load management, utility coordination, and interconnection, ensuring solutions are technically sound, scalable, and resilient., • You’ll advise on civil, electrical, and systems integration challenges, supporting constructability, risk mitigation, and delivery excellence., • You’ll support execution teams through escalation management and strategic guidance, ensuring programs meet schedule, budget, safety, and quality expectations aligned with Accenture standards., • You’ll recruit, mentor, and develop Clean Mobility talent across the East Coast, building a high‑performing, multidisciplinary leadership bench., • You’ll establish best practices, delivery frameworks, and repeatable offerings for fleet decarbonization and charging infrastructure programs., • You’ll contribute to thought leadership and market positioning, strengthening Accenture’s Clean Mobility point of view and brand leadership., • Bachelor’s degree in Engineering, Construction Management, Planning, Public Policy, or a related field; advanced degree preferred, • 15+ years of experience in transportation, energy, or infrastructure consulting, with a strong focus on fleet electrification or zero-emission programsBONUS POINTS IF YOU HAVE:, • Demonstrated success in business development and client leadership at the Sr. Director or VP level, • Deep familiarity with East Coast transit agencies, port authorities, municipalities, utilities, and/or private fleet operators, • Strong technical understanding of EV charging infrastructure, grid coordination, depot design, and fleet operations, • Proven experience leading large, multi-disciplinary teams and complex programs ($50M+ capital programs preferred), • Professional Engineer (PE) or similar credential is a plus but not required, • Excellent executive communication skills; able to engage credibly with C-suite, agency leadership, and technical teamsCompensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired in Illinois, Minnesota, California, Colorado, District of Columbia, Maryland, Massachusetts, New York, New Jersey, Ohio or Washington as set forth below. We accept applications on an on-going basis and there is no fixed deadline to apply.We believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities. For details, view a copy of the Accenture Equal Opportunity and Affirmative Action Policy StatementAccenture is an EEO and Affirmative Action Employer of Females/Minorities/Veterans/Individuals with Disabilities. Accenture is committed to providing veteran employment opportunities to our service men and women.

Job Description Design the Future of HVAC – Join Northern Wolves Air Conditioning as a Mechanical Design Engineer! Position Title: Mechanical Design Engineer – HVAC Company Name: Northern Wolves Air Conditioning Pay Range: $90,000–$115,000 per year (based on experience) + Year-End Bonus Employment Type: Full-Time Location: Brooklyn, NY Industry: Commercial HVAC / Mechanical Job Overview Northern Wolves Air Conditioning is seeking a Mechanical Design Engineer to head up our in-house design and engineering operations. This is a rare opportunity to own the full spectrum of commercial HVAC engineering; from design to drafting to final field execution. As our senior technical authority, you’ll play a critical role in setting the design standards for our company and ensuring every project is executed to code, to spec, and with precision. If you're a detail-oriented professional with deep design-build experience and a leadership mindset, this is where your expertise will shape the built environment across New York City. Who We Are At Northern Wolves Air Conditioning, you’re not just a number - you’re a key player. We specialize in complex commercial mechanical projects and empower our people to grow into leadership. Our work is high-profile, fast-moving, and built on a culture of craftsmanship, accountability, and integrity. We offer room to lead, learn, and leave a legacy. Learn more at Key Responsibilities • Develop and manage commercial HVAC system designs from concept through construction., • Produce and review shop drawings for HVAC ductwork and piping using AutoCAD and Revit., • Prepare and manage submittals, RFIs, equipment selections, and technical narratives., • Lead design-build engineering efforts and implement value-engineered solutions., • Ensure compliance with NYC Mechanical Code, Energy Code, IMC, ASHRAE, and AHJ requirements., • Perform and review Manual J calculations and load analysis., • Apply and document for ITC/incentive-related mechanical systems when applicable., • Coordinate with structural, electrical, architectural, and general contractor teams., • Provide technical support for construction, including sketches, clarifications, and field troubleshooting., • Bachelor’s Degree in Mechanical Engineering (required); Master’s Degree is preferred., • 5-7+ years of experience in commercial HVAC mechanical design., • Strong experience with shop drawings, coordination drawings, and design documents., • Proven design-build project experience., • Deep knowledge of NYC DOB codes, permitting, and compliance., • Advanced skills in AutoCAD and Revit., • Solid understanding of HVAC controls, equipment integration, and system performance., • Must hold a Mechanical Engineer Diploma; PE license or license-track preferred., • Strong leadership, communication, and documentation skills., • Weekly Pay Cycle, • Paid Time Off – Holidays, Vacation, Sick Days, • Paid Training and Certifications, • Tech Package – Smartphone or tablet provided, • Company Events & Uniforms Provided, • On-site at company headquarters, serving projects across the NYC metro area. Equal Employment Opportunity We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status.#Joveo

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Senior Control Systems Engineer to work on the design of the control system for the company’s Eos integrated stellarator. This role will define the overall control system architecture, select core technologies, design platforms, and manage technical interfaces between all major control subsystems including plasma control, power supply control, cryogenic control, safety systems, and data acquisition. As a senior technical engineer, this role will work closely with subsystem teams, vendors, and collaborators to ensure that the architecture meets real-time performance, reliability, scalability, and regulatory requirements. This role is pivotal in shaping the next-generation control infrastructure for one of the most innovative stellarator-based fusion pilot plants in development. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the definition of the Eos control system architecture (functional, physical, and communication layers)., • Select core technologies for real-time control, SCADA, networking, timing, and data management., • Develop high-level system specifications, interface control documents (ICDs), and system block diagrams., • Oversee integration and coordination of control subsystems., • Ensure consistency across communication protocols (e.g. OPC UA, DDS, Modbus, EPICS)., • Contribute to the selection of PLC/DCS platforms for safety- and mission-critical systems., • Work with the AI/ML and Plasma Control teams to integrate predictive control and digital twin functionality into the architecture., • Support development of conceptual and preliminary design packages, including architecture reviews and validation plans., • Collaborate with systems engineering to ensure alignment with the overall plant functional architecture and TRL maturity goals.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Control Systems, Physics, or related field., • 5+ years of experience in control system design for fusion energy, particle accelerators, large scientific facilities, or similar high-reliability environments., • Strong proficiency with EPICS or TANGO control frameworks, Simulink and MATLAB for system modeling and simulation, SysML/UML for system-level architecture and documentation, and OPC UA, DDS, TCP/IP, PTP/White Rabbit communication protocols., • Experience with high-speed data acquisition, real-time systems, and distributed control., • Knowledge of IEC 61508 / 61511 or other safety-related standards., • Familiarity with PLC platforms (e.g. Siemens, Beckhoff, Allen-Bradley)., • Experience working in multi-disciplinary teams and managing technical vendors., • Hands-on experience with FPGA or embedded systems is a plus., • Previous experience in early-phase fusion device development is highly desirable.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionFST Technical Services Commissioning (Cx) division is one of the leading Cx firms in the country. We partner with clients for quality assurance in the design, construction, and post-acceptance phases of building projects. We ensure that equipment in mechanical, electrical, plumbing, and associated systems are designed, installed, and functionally tested to meet the clients requirements and design intent. About the job: • A commissioning project engineer reports to a team leader and is responsible for the delivery and execution of our professional services tasks for equipment in mechanical, electrical, plumbing, and associated systems., • Primary activities include completing office assignments, time and expense management, in-field installation validation, field observation reports, functional performance testing, meeting attendance and documentation, on-site and factory witness testing, submittal reviews, and design documentation evaluation., • Additional activities include executing target billable hours, managing tasks within time budgeted, leading cx meetings, assisting the construction team with identifying/solving technical issues when they arise, and maintaining positive relations with existing clients on assigned projects., • Administrative activities include supporting the team leader in coordinating with other project engineers and senior project engineers regarding weekly staff scheduling, training/mentoring team members on proper documentation, field procedures, and equipment usage, and participating in the company-wide safety and training programs., • Candidate must be able to travel to and from various job sites within the assigned region., • Requirements:, • Completed a Bachelors Degree in HVACR, Mechanical or Electrical Engineering, construction management or an associates degree in engineering technology or related trade school, construction, maintenance, or engineering controls experience, • 5+ years employment in a staff or intern position related to maintenance, construction, or engineering controls or 1+ years in the Cx industry, • 3+ years of experience managing the interconnectivity of building equipment including pumps, fans, motors, air ventilation, chillers, boilers, steam distribution, heat absorption, building automation systems, optimization techniques, electrical distribution, and fire alarm systems., • Knowledge of construction drawings, specifications, bid process, and ancillary industry documents, • Aptitude to solve problems independently and in a team environment, • Affective verbal and written communication skills, • Public speaking and presentation skills, • Adaptability to varying indoor and outdoor working conditions, • Physical fitness, capability to lift at least 30 pounds, and ability to climb ladders, • Proficiency in Microsoft officePreferred Qualifications: • Trade association involvement, • EIT, ACP, CEM or similar certification from experience, • OSHA 10 or other safe workplace certifications, • Familiarity with building information modeling Pay range based on experience $100k - $130k based on experience FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future. Powered by JazzHR DW8dI5CLW2

Job Description Senior Electrical CAD/BIM Designer ITnova is seeking a qualified Electrical CAD/BIM Designer to support the planning, design, construction, and evaluation of critical infrastructure assets. This role will provide CAD and REVIT production support for in-house Electrical and Electronics Engineering projects at various facilities operated by the Port Authority of New York and New Jersey. Responsibilities include the preparation and modification of: • General arrangement drawings, • Electrical plans and utility drawings, • Equipment layouts and elevations, • Electrical schedules, • One-line, riser, and wiring diagrams On an as-needed basis and at the discretion of the Port Authority, the Designer may be assigned to provide CAD and REVIT support services to the Structural Engineering Group. Minimum Requirements To be considered for this position, the candidates must demonstrate the minimum required education, technical qualifications, and experience outlined below: • Bachelor's degree in Engineering, Engineering Technology, Applied Science, Computer Aided Design or a related field, • A minimum of fifteen (15) years of experience producing high-quality CAD and REVIT drawings for Electrical and Electronics Engineering contracts, including:, • Renovations to existing buildings, • Construction of new buildings and structures, • Electrical substations, • Rail systems, • Electrical Infrastructure work, including:, • Roadway lighting, • Ductbank and manhole systems, • Taxiway/runway airfield lighting, • Demonstrated working knowledge of FAA Advisory Circular AC 150/5340-30, including the ability to independently design the layout of common airfield ground lighting systems and prepare coordinate tables with minimal oversight., • Proven track record of successfully delivering complex projects on aggressive schedules, • Strong written and verbal communication skills, with the ability to interpret and implement engineer-provided design comments Preferred Qualifications • Experience delivering high quality CAD and REVIT drawings for Structural Engineering construction contracts., • Experience working with and adhering to the Port Authority CAD and BIM Standards, • Experience assisting with site surveys to establish existing conditions, • Experience providing CAD and REVIT training or mentorship to other staff members, • Experience working with Confidential and/or Confidential and Privileged documents Benefits: • Medical, Dental & Vision benefits, • 401k, • Paid-time-off, • Paid holidays, • Training reimbursement This position is Hybrid, 4 days a week on-site. ITnova is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Job Description Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity’s Built Environment division, combining its deep expertise in high-performance building systems with Trinity’s strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B’s capabilities and offers employees: • Access to a broader portfolio of international projects and clients, • Enhanced career mobility across Trinity’s global network, • Leads the design on Tenant fit-out projects and is a key designer on base building/infrastructure upgrades; assembles riser diagrams, schedules, and floor plans; participates in specification writing., • Establishes design criteria from the project proposal and assembles basis of design documents., • Assembles a complete set of contract documents for their trade including the lay out main equipment rooms, closets, shafts, risers, etc., • Leads design for their trade’s ancillary systems required for a project and can assemble scope associated drawings with these systems (e.g. UPS, generators, fuel, secondary water pumps, water reclamation system, etc.)., • Reviews shop drawings, RFI’s, Contractor change orders, performs site visits and punch-lists with limited supervision to verify that designs are being implemented accurately., • Assists in establishing an efficient project schedule for his/her project team that ensures appropriate use of resources while adhering to deadlines., • Minimum 5 years of experience, • Bachelor’s degree in Electrical Engineering, • Strong understanding of trade-specific scope of project, trade-related codes, and the required coordination with other trades, • Strong understanding of documentation requirements and content for each deliverable phase (e.g., SD, DD, CD and specifications), • Hybrid workplace offering the flexibility to work both from home and the office, • Comprehensive benefits package including 401k employer match and stock options, • Paid time off (PTO), volunteer program and employee resource groups Jaros, Baum & Bolles is an equal-opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR BzEC0aSi66

Job DescriptionSenior Electrical Engineer - New York, NY Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc., to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Senior Electrical Distribution Systems to lead the design, specification, and integration of the power supplies, power distribution network, grid interface, STATCOM, and energy storage systems for the company’s Eos integrated stellarator. This role combines high-voltage substation and distribution infrastructure design with simulation-driven development of plant-wide energy management strategies. This role will be responsible for defining and validating the full electrical infrastructure, ranging from the high/medium-voltage power supply systems, power generation units, HV/MV utility interconnection, and substation architecture to backup generators and BESS platforms. You will interface with external EPC and utility partners, while driving internal technical requirements, simulations, and review processes across the design, procurement, and commissioning lifecycle. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the design of the Eos power distribution architecture, including power supply systems, medium and high-voltage distribution, MV switchgear, LV panelboards, and critical backup circuits., • Define grounding, neutral earthing, surge protection, and lightning protection strategies for plant-wide electrical infrastructure., • Evaluate integration of grid interconnection, backup generators, STATCOM, and Battery Energy Storage Systems (BESS) for load balancing, UPS capability, and magnet power recovery., • Run detailed load flow, short-circuit, and transient stability simulations using tools such as ETAP, DIgSILENT PowerFactory, or PSCAD., • Model time-varying load profiles for power supply systems and estimate steady-state vs. transient energy demands., • Contribute to the plant’s overall power management strategy, load shedding philosophy, and power quality targets., • Develop technical specifications, single-line diagrams, protection philosophies, and equipment layouts., • Lead development of technical requirements for external EPC firms responsible for final design, construction, and commissioning., • Participate in design reviews, FAT/SAT, vendor interface, and field verification of electrical systems.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or related field., • 7+ years of experience in power systems engineering, including substation design, grid integration, or industrial distribution infrastructure., • Experience with medium- and high-voltage distribution (up to 230 kV preferred), transformer selection, protective relaying, and electrical safety., • Proficiency in electrical system modeling and simulation tools, such as ETAP, PowerFactory, SKM Power Tools, or PSCAD, • Strong understanding of IEEE, NFPA, IEC standards, grounding calculations, and utility interconnection requirements., • Experience in power systems for fusion devices or accelerators., • Familiarity with BESS systems, UPS, and energy management systems (EMS)., • Experience coordinating with utility providers, EPC contractors, and third-party interconnection consultants., • Understanding of power supply dynamic behavior (e.g. magnet loads, pulsed systems) and interaction with grid stability., • Knowledge of SCADA/EMS integration, protective device coordination, and commissioning procedures., • Simulation & Analysis: ETAP, PowerFactory, PSCAD, SKM, CYME., • CAD & Design Tools: AutoCAD Electrical, EPLAN, Revit MEP., • Exceptional work ethic and communication skills.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Position Description A client of AlphaStaffHCM is seeking an experienced Senior/Principal Engineer to lead the design, integration, and development of photonic integrated circuits with integrated laser sources. The ideal candidate will have deep expertise in semiconductor laser physics, photonic device design, process integration, and system-level modeling. This role requires a hands-on leader capable of driving projects from concept through fabrication, testing, and qualification, with a strong focus on innovation and performance optimization for next-generation photonic systems. Duties and Responsibilities • Lead the design and modeling of integrated photonic circuits incorporating lasers, modulators, amplifiers, and passive components., • Develop and optimize epitaxial structures for laser integration on photonic platforms (e.g., Thin-film lithium niobate, Si photonics)., • Perform optical and electrical modeling using tools such as Lumerical, COMSOL, FDTD, and Matlab/Python codes., • Drive process integration efforts including mask design, fabrication flow development, and collaboration with foundry partners., • Conduct device characterization, performance analysis, and reliability testing to meet product specifications., • Provide technical leadership in cross-functional teams including epitaxy, process engineering, testing, and reliability., • Support product qualification efforts including wafer acceptance testing, reliability modeling, and failure analysis., • Ph.D. in Optics, Photonics, Electrical Engineering, or a related field., • 10+ years of industrial experience in semiconductor laser design, fabrication, and testing., • Strong background in photonic device modeling (FDTD, FDFD, PWEM, TMM, FEM)., • Proficiency with photonic design and simulation tools (Lumerical, COMSOL, Sentaurus, etc.)., • Experience with III-V semiconductor processes including lithography, etching, deposition, and characterization., • Demonstrated ability to lead technical projects and mentor junior engineers., • Experience with photonic crystal lasers (PCSEL), VCSELs, DFB, EML, or SOA devices., • Knowledge of integrated photonic platforms (Si photonics, InP, heterogeneous integration)., • Proficiency in programming for data analysis and automation (Python, Matlab, SQL, VBA)., • Experience with reliability testing, wear-out modeling, and qualification for high-volume production., • Familiarity with mask design tools (KLayout, L-Edit) and process integration for photonics., • Track record of innovation through patents, publications, or product development., • Experience working in a cross-cultural, multi-site R&D environment. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job Description Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity’s Built Environment division, combining its deep expertise in high-performance building systems with Trinity’s strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B’s capabilities and offers employees: * Access to a broader portfolio of international projects and clients * Enhanced career mobility across Trinity’s global network * Interdisciplinary collaboration with experts in sustainability, environmental science, and digital infrastructure About the Role The Senior Project Engineer is a technically skilled and experienced engineer with developed communication, coordination, project management and leadership skills. The Senior Project Engineer manages larger projects and is the key lead for fieldwork, and a liaison for the design team. The Senior Project Engineer is expected to proactively coordinate, communicate, problem solve across disciplines, and exhibit the ability to balance the client relationship with the project’s financial goals. Key Responsibilities • Reads, understands, and interprets construction documents (e.g. design drawings, submittals, etc.), • Distills data from project specifications, contract drawings, and relevant code sections to prepare project-specific inspection/test scripts of multidisciplinary systems, or client-requested method of procedures, and/or system level testing documentation., • Directs equipment and system level testing to confirm operation in accordance with project requirements., • Records results of testing and technical description of discrepancies., • Reads, understands, and interprets industry standards, guidelines, and certification program (e.g. ASHRAE, LEED, WELL, etc.) requirements., • Oversees and confirms project processes are in place to meet industry certification programs., • Approves review of equipment performance data (e.g. BMS trend data, field measurements, etc.) and identified normal and abnormal operational characteristics., • Conducts project site surveys and records technical information., • Has a firm understanding of local Building Code (BC) requirements Minimum Qualifications • Bachelor's degree in Engineer or related discipline from an ABET accredited program., • Minimum of 4+ years of experience., • Specific dedicated Retro-Cx experiences, LL87 experience, • Holds a professional certification title (LEED, CCP, CEM, etc.)., • Has understanding of all trades scope of project., • Has advanced understanding of firm/team production capacity in establishing and maintaining project deliverables., • Has a fundamental understanding of miscellaneous design software tools applicable to MEP design (such as Revit and AutoCAD). Legacy + Innovation: Our company blends a rich history with forward-thinking design, including smart building systems and deep carbon reduction strategies. * Collaborative Culture: With over 400 professionals, our company fosters mentorship, teamwork, and continuous learning. * Global Impact: Now part of Trinity, our company offers opportunities to work on transformative projects across commercial, healthcare, aviation, life sciences, and data center sectors. * Multiple office locations: New York, Boston and Philadelphia. What We Offer * Hybrid workplace offering the flexibility to work both from home and the office * Comprehensive benefits package including 401k employer match and stock options * Paid time off (PTO), volunteer program and employee resource groups * Training and professional development courses through JB&B University Estimated compensation range: $100,000 - $115,000 base salary per year Jaros, Baum & Bolles is an equal-opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR QJxGCriwWA

Job Description Work Authorization: Applicants must currently be authorized to work in the United States on a full-time basis. Steven Winter Associates (SWA) does not sponsor employment-based visas (e.g., H-1B, OPT, etc.) for this position, now or in the future. Why Steven Winter Associates? At SWA, you’re not just joining a company, you’re joining an employee-owned team committed to making buildings healthier, more sustainable, and lower-carbon. * Be part of a collaborative, and supportive environment where your ideas matter. * Work on real projects, seeing the impact of your work in the field and in communities. * Learn from experienced building science professionals. Why This Role Matters: At SWA, our consultants play a pivotal role in transforming the city's most challenging structures into high-performing, sustainable buildings through decarbonization initiatives. As a Mid-Level Energy Engineer on our BODE (Building Operations, Decarbonization & Efficiency) team, you are the "boots on the ground" for this transition. Every boiler we decommission and every electrification strategy you help implement directly lowers the carbon ceiling. You will be taking the lead in turning ambitious climate goals, like Local Law 97, into reality. You’ll be doing work that fundamentally improves the cities we live in. The proposed annual salary range for this position is $70,000 to $100,000 based on a 40-hour work schedule. The final salary may vary depending on confirmed job-related skills and experience. Responsibilities: Reasonable accommodation will be provided to enable individuals with disabilities to perform the essential functions. * Perform project work for commissioning, energy auditing, and retro-commissioning of new construction and existing buildings. * Complete technical project work including reviewing construction documents, submittals, and code requirements, developing testing plans, and inspecting installations. * Assume primary responsibility for executing small projects, including financials. * Lead communication with building owners, developers, architects, engineers, and contractors. * Work with internal stakeholders including project managers, energy modelers, and sustainability and accessibility consultants. * Assist with project proposals under guidance from Senior Engineers. * Train entry level staff members when applicable. Who You Are: * Bachelor’s degree in engineering or a related building science field. * You know your way around an HVAC system. 2+ years of relevant experience working with HVAC systems in large multi-family or commercial buildings. * You’ve had experience conducting field inspections related to mechanical, electrical, and plumbing equipment. * You’ve spent time onsite conducting MEP inspections. * You have a solid grasp of HVAC systems and emerging high-performance alternatives. Technical Skills: * Advanced knowledge of Excel * Proficiency in MS Office Suite Preferred Knowledge: * Energy Codes and / or ASHRAE standards. * NYC Local Laws related to energy and climate (Local Laws 84, 87, 95 and 97) Application Process: * A cover letter is requested for consideration outlining interest. * Resumes will be reviewed on a rolling basis. Qualified candidates will be invited to complete a 30-minute technical assessment to evaluate their skills. Based on the assessment results, selected candidates will proceed to up to 3 rounds of interviews, with the final round including a presentation. * If you meet at least 75% of the qualifications, we encourage you to apply. * SWA is committed to inclusion and will provide reasonable accommodation for individuals with disabilities. Physical Requirements: While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to type, reach with hands and arms, talk, and hear. The employee frequently is required to climb stairs, use elevators and exterior construction hoists, and may be exposed to cold and hot interior and exterior temperatures for extended periods of time (when in the field). Travel Requirements: Occasional overnight travel may be required (Less than 10%). Frequent local field visits in the NYC Metro area will be necessary (approximately 40-50%). Working Environment: Recent hires may be required to work in-office five days per week during onboarding, with potential for a hybrid schedule (three days in-office) post onboarding with flexibility based on job duties, and site work. EEO Statement: SWA is an Equal Opportunity Employer – all qualified applicants will be afforded equal employment opportunities without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, or marital status. DEI Statement: SWA is a workplace where we are aware and welcoming of the ways in which we are all diverse as evidenced by a culture of listening and understanding. We endeavor to create a workplace where people feel empowered to act; a safe place where people are open to discussing different views; ongoing education opportunities around diversity, equity, and inclusion; and to build a culture of belonging and accountability. What to Know: Steven Winter Associates, Inc. (SWA) is a proud employee-owned firm that’s been transforming the built environment for over 50 years. Our mission is to make buildings more sustainable, energy-efficient, accessible, healthy, and resilient, not just with better structures, but to the communities they serve. Working with architects, engineers, developers, owners, and project teams, our team of consultants is always pushing boundaries, collaborating, and problem-solving to deliver solutions that benefit people and the planet. Join us and become part of a company where your work helps shape a better built environment—and where your voice matters. For further information on Steven Winter Associates, please visit .

Job Description SUMMARY: Engineering Supervisor is the senior technical resource for engineering operations, responsible for advanced repairs, mentoring staff, managing vendors, and ensuring property-wide safety and compliance. This individual acts as a lead technician or Engineer-on-Duty. Location: HOLIDAY INN EXPRESS – MIDTOWN WEST 538 West 48th Street | New York, NY 10036 Pay Rate: $24-$28 Key Responsibilities • Manage work orders and delegate assignments to Line Engineers. Assist Facility Manager with diagnosis and repair of complex HVAC, plumbing, electrical, and building control systems., • Serve as Engineer-on-Duty and lead rounds, inspections, and shift reporting., • Maintain current knowledge of applicable federal, state, and local building codes and regulations., • Use preventive maintenance systems and software to track asset condition and repair schedules., • Oversee maintenance inventory and order supplies as needed., • Report to work on time and in full uniform, and uphold a professional appearance and conduct in all guest and team interactions., • Train and mentor fellow team members by sharing technical knowledge and hands-on skills., • Troubleshoot maintenance issues, identify root causes, and implement high-quality repair solutions., • Maintain accurate records of completed work, project updates, and equipment status in designated logs or software., • Clean, lubricate, and maintain tools and equipment; ensure proper storage after use., • Safeguard assigned tool pouch and equipment in accordance with engineering department standards., • Monitor facility systems and respond to malfunctions or emergencies in a timely, effective manner., • Maintain operational knowledge of fire sprinkler and emergency power systems; support safety and emergency protocols., • Respond to building emergencies and act quickly to protect guests, staff, and assets., • Restore systems to normal operations efficiently after disruptions or emergency incidents., • Comply with all departmental safety procedures and support an accident-free work environment., • Identify and immediately address any unsafe or hazardous conditions affecting guests or employees., • Record and interpret meter readings, pressure gauges, and monitoring systems as assigned., • Log daily activities, work orders, and shift issues to support effective team communication., • Maintain cleanliness and organization in all engineering and maintenance work areas., • Support Engineering Management with additional assignments to maintain property operations., • Communicate with engineering management regarding work status, required materials, and delayed tasks., • Reference and adhere to company Standard Operating Procedures (SOPs) as part of daily operations., • High school diploma or GED required;, • HVAC and EPA certification required with Electrical or plumbing trades a plus, • 3–5 years of hands-on facilities maintenance experience, including at least 1 year in a supervisory or lead technician capacity., • Strong knowledge of MEP systems, building automation, and guest service standards., • Able to lift 50 lbs, operate lifts, and work at heights up to 50 feet., • Strong leadership, documentation, and troubleshooting abilities.

Job Description Senior Civil Engineer – Airport Infrastructure (REQUIRED) New York City (In-Office) $120,000–$140,000 Senior Civil Engineer role focused on design and planning of active airport infrastructure. This is not general civil work. Candidates must have direct airport project experience working within operating commercial airport environments. Work supports major airport expansion and modernization programs across the U.S., including landside systems and Automated People Mover (APM) infrastructure. What You’ll Do • Lead civil design for airport terminal and landside infrastructure, • Design within active airport environments (phasing, constraints, coordination), • Support APM systems: guideways, stations, alignments, supporting civil scope, • Develop grading, drainage, utilities, and pavement designs specific to airports, • Contribute to airport capital improvement programs (CIP), • Coordinate with airport authorities, planners, and multidisciplinary teams, • Provide design support during construction phases Requirements • Direct airport/aviation project experience required, • Experience designing within active commercial airport environments, • Bachelor’s Degree in Civil Engineering, • 7+ years civil engineering experience on airport or aviation infrastructure projects, • Hands-on design experience with APM systems, airside/landside interfaces, or terminal-area infrastructure, • Strong working knowledge of airport design standards and agency coordination, • Proficiency in AutoCAD and Civil 3D, • U.S. Citizenship or Permanent Residency, • EIT required, • PE preferred This role targets civil engineers who have already executed airport design work and understand the operational, regulatory, and phasing complexities of building inside active airports. Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job DescriptionAre you ready to join a growth-oriented team where creativity meets innovation? At Ware Malcomb, we are a dynamic and forward-thinking design firm committed to pushing the boundaries. Our team-oriented, collaborative approach ensures that every project is a blend of visionary design, seamless project delivery, and we are actively engaged with both the community and the industry. Discover our vibrant culture to get an inside look into life at Ware Malcomb and the programs we offer. The Electrical Engineering Manager is a key member of the Ware Malcomb senior management team, responsible for the growth, revenue, profitability, staff management and overall client relationships for the Atlanta electrical engineering market. As the Electrical Engineering Manager, you will also be responsible for nurturing a positive, team-oriented environment, ensuring financial goals and deadlines are being met, assisting in business development, and managing select projects.Your Role • Prepare proposals and contracts for electrical engineering projects, • Guide projects from proposal through completion ensuring alignment with client objectives and profitability targets, • Lead complex, multidisciplinary engineering projects and actively contribute to project execution as needed, • Oversee group operations with expanded responsibilities in strategic planning, budgeting, revenue forecasting, and staffing, • Develop and maintain an environment that supports team member growth, achievement, and advancement, • Support team members through coaching, mentoring, performance measurement, and recognition, • Partner with Talent Acquisition team and Operations to lead recruitment and hiring efforts, • Perform business development tasks for internal and external clients and attend relevant networking functions, • Review project revenue projects, monthly financial reports, and monthly business reports, • Build trust and relationships with clients by showcasing a commitment to client success through every phase of a projectQualifications, • Bachelor’s Degree from an ABET-accredited university, • 15+ years of electrical engineering experience, • Prior leadership experience, • Professional Engineer (PE) license, • Advanced analytical, financial, and communication skills, • Strong negotiation and relationship-building skills

Job DescriptionWe have an immediate need for an experienced Senior Engineering Project Manager to join us in providing industry-leading design and consulting services. Our client is a full-service engineering, energy commodity consulting, construction management and commissioning firm. For this position, we are looking for a Senior Project Manager with deep mechanical or electrical design engineering experience in any of the following areas: Power engineering – distributed generation, micro-grid design solutions, substations, utility-scale power, CUP, CHP Commercial engineering – gaming, senior living, K-12 schools, high rises Health & Science – healthcare and life sciences facility engineering services, clinical care MEP services, power plant engineering services for hospitals, labs, etc. The qualified and motivated successful candidate in this position will have the opportunity to advance to the Director level position which includes bonus/profit sharing compensation. POSITION SUMMARY As the Senior Engineering Project Manager, you will serve as the technical lead for design execution of projects. You will oversee all project design activities and serve as the primary point of contact for the client on the project. You will also be responsible for the design quality, delivery of contracted scope, and meeting project objectives, requirements, schedules, and budget. The position also requires the candidate to design electrical or mechanical systems, develop equipment and systems specifications, assist with proposals, engage with clients, and project execution partners and most importantly, work independently. RESPONSIBLITIES • Serve as Project Manager for large projects., • Conduct peer review, technical oversight and quality control of design team’s work products., • Provide project coordination with all involved in the project; internal, external, sub-contractors, etc., • BS in Engineering, • Professional Engineer (PE) licensure required., • Must be knowledgeable of local, state and national code requirements., • Experience and knowledge in energy efficiency improvement techniques., • Extensive experience in managing and coordinating multidiscipline projects., • Strong working knowledge and utilization of Autocad and Revit, • Must be a good time manager, comfortable with frequent deadlines and transitions., • Effective at working with other staff members in a fast-paced environment. LOCATION: This position can work out of our headquarters in Voorhees, NJ and/or our offices in NYC and Philadelphia. This position can also be hybrid with site visits as required.

Job Description Job Summary The Senior Commissioning Engineer plays a pivotal role in ensuring the seamless pre-commissioning, commissioning, and start-up of building systems. The successful candidate will play a critical role in delivering high‑performance, resilient building systems while partnering closely with clients, design teams, and field personnel. This role is ideal for a commissioning professional who values technical excellence, hands‑on problem solving, and collaborative leadership, and who wants their work to have a visible, real‑world impact. Key responsibilities also include managing and approving multi-discipline commissioning processes, ensuring compliance with all relevant procedures, specifications, and project standards. The role oversees the installation and integration of commissioning supplies and systems, with a strong emphasis on safety practices and procedures throughout all phases of work. Regular audits of commissioning activities are conducted to verify adherence to environmental, quality, and safety requirements. Primary Responsibilities • Lead pre-commissioning, commissioning, and start-up of building systems., • Participate in operational screenings, studies, and the preparation of operation write-ups., • Provide hands-on operation support, troubleshooting, and deliver client operation training., • Collaborate with project engineering and design teams to ensure drawings and documents meet commissioning requirements., • Monitor and report on commissioning progress on a regular basis., • Review and assess criteria, specifications, drawings, equipment submittals, and other project documentation., • Oversee multi-discipline teams in the execution of pre-commissioning and commissioning tasks., • Review and approve commissioning processes to maintain compliance with project procedures, specifications, and standards., • Supervise the installation and integration of commissioning supplies and systems., • Ensure strict adherence to safety procedures and practices at all times., • Bachelor’s degree in Mechanical or Electrical Engineering., • Experience in operational and process design., • Familiarity with Monitoring-Based Commissioning (Cx) practices., • Proven expertise in applying HSE standards, leading start-up and commissioning teams, conducting operational classroom training, and maintaining HSE consistency onsite., • Strong ability to conduct and write comprehensive commissioning reports., • Willingness and ability to travel to various job sites as required including overnight. HJcyqac4Wr

Job DescriptionAbout Dyania Health Dyania Health is a venture-backed company founded in 2019 which has developed Synapsis AI, an end-to-end system that combines a medically post-trained LLM with a physician-driven algorithmic reasoning engine to understand and assess clinical characteristics in electronic medical records. Synapsis AI is designed for installation within the healthcare system's computing environment or on healthcare system private clouds to automate manual chart review of EMRs, without removing any data from the healthcare system. Synapsis AI completes pre-screening on both unstructured and structured patient data, deploying medical logic with temporal sensitivity to dynamically match changing patient characteristics to complex clinical trial criteria within the exact window when a given EMR may qualify for study protocol criteria. If you like to innovate at the forefront of technology and build software that solves important real-world problems, we'd love to hear from you! At Dyania Health we are transforming the way in which machines understand and process medical information. About the Role We are seeking Senior Machine Learning / Software engineers who are passionate about their craft to help us in that mission. As a senior ML engineer at Dyania, you'll design, build, and deploy scalable ML-driven systems that power biomedical information processing. In this role, you will operate at the intersection of machine learning research and production-grade software engineering, owning the full lifecycle of ML-powered microservices — from model development and evaluation to deployment, monitoring, and continuous improvement. You will play a key technical leadership role, mentor junior engineers, and collaborate closely with product, UX, and clinical teams to translate real-world healthcare challenges into robust, scalable solutions. Key Responsibilities • Design, implement, and deploy ML-powered software components within a microservice architecture., • Lead development and productionization of NLP and transformer-based models for biomedical information processing., • Own the full ML lifecycle: data preparation, model training, evaluation, optimization, deployment, and inference at scale., • Architect scalable and maintainable ML infrastructure and services., • Collaborate cross-functionally with product, UX, and clinical stakeholders to understand requirements and rapidly prototype new capabilities., • Analyze model and system performance; communicate findings and trade-offs clearly to technical and non-technical stakeholders., • Ensure reliability, scalability, and security of ML services in production environments., • Mentor junior engineers and contribute to raising the technical bar across the team., • Contribute to architectural discussions and strategic technical decisions. Required Qualifications: • 5+ years of industry experience in machine learning-focused software engineering (excluding internships and academic projects)., • Bachelor’s or graduate degree in Computer Science, Mathematics, Electrical Engineering, or a related technical field., • Strong hands-on experience training, testing, deploying, and serving ML models in production environments., • Experience with transformer architectures and NLP applications., • Experience with multi-GPU and multi-node distributed training and inference., • Proficiency in Python., • Proficiency in Java (and/or Kotlin/Scala) or C++., • Experience designing and implementing microservices., • Professional experience with Git and collaborative development workflows., • Experience with relational databases and/or NoSQL systems (e.g., knowledge graphs)., • Strong communication skills and ability to explain technical concepts clearly. Preferred Qualifications: • Experience working with AWS or similar cloud platforms., • Experience working in agile development environments and familiarity with Jira., • Experience building ML systems in healthcare or other regulated environments., • Experience with monitoring, observability, and performance optimization in production ML systems. What Success Looks Like • You deliver production-ready ML systems that are scalable, reliable, and maintainable., • You proactively identify technical risks and propose thoughtful solutions., • You translate ambiguous biomedical problems into structured ML approaches., • You elevate the engineering team through mentorship and thoughtful technical leadership., • You effectively communicate insights and trade-offs to diverse stakeholders. Team Culture: • We try every day to maintain empathy for patients and our teammates., • We value small egos, self-awareness, and humility in our teammates., • We appreciate flexible and adaptive attitudes towards solving problems, as strategic priorities may shift., • We love diversity of thought, perspective, working style, skill set, knowledge, and interests amongst our team., • We value open dialogue and brainstorming across multidisciplinary teams. Dyania Health is an equal opportunity employer that is committed to workplace diversity and inclusion. We do not discriminate on the basis of race, gender, gender identity, color, religion, national origin, sexual orientation, or any other legally protected characteristic as outlined by federal, state, or local laws. Benefits • Competitive Salary, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Generous Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Training & Professional Development Support, • Remote work

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking an Senior Application Engineer to be responsible for initial consultation with the customer, as well as estimating and proposal development for industrial automation solutions including food & beverage, life sciences, and chemical industries. The projects span the range of process control and machine control automation applications. You will also own and develop methods, tools, and processes in estimating and proposal development for the entire enterprise. You will: • Meet with customers to review the technical scope and engineering requirements and work with local E Tech Group Business Development Managers in the sales pursuit process., • Prepare work to be estimated by gathering proposals, blueprints, specifications, and related documents., • Quote normal Control Panel / PLC / HMI projects without much assistance, calling in engineering help only for niche cases., • Identify labor, material, and time requirements by studying proposals, blueprints, specifications, and related documents., • Compute costs by analyzing labor, material, and time requirements., • Resolve discrepancies by collecting and analyzing information., • Present prepared estimate by assembling and displaying numerical and descriptive information., • Prepare special reports by collecting, analyzing, and summarizing information and trends., • Maintain cost database by entering and backing up data., • Maintain technical knowledge by attending educational workshops and reviewing technical publications., • Contribute to team effort by accomplishing related results as needed., • Bachelor's degree in Engineering or equivalent experience and educational background, • 5+ years of Industrial Automation experience directly related to design, controls, programming, and electrical engineering, • Past experience of extensive use of the Company's Methods, Tools, and Process specific to estimating and proposal management standards., • Understanding of ERP / Project Costing Systems and parametric estimation tools., • Extensive understand of customer plans, specifications, technical documentation as well as RFQ documentation, • Strong written and verbal communication skills, • A DNA comprised of collaboration and teamwork Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes full paid vacation, paid holidays, paid family leave and personal/sick time off.

Job DescriptionA Commissioning Senior Project Engineer reports to a Team Leader and is responsible for the delivery and execution of our professional services tasks for equipment in mechanical, electrical, plumbing, and associated systems. Primary activities include completing office assignments, time and expense management, in-field installation validation, field observation reports and meeting notes, functional performance testing, on-site and factory witness testing, writing of reports and meeting notes, submittal reviews, and design documentation evaluation. Additional activities include executing target billable hours, managing tasks within time budgeted, leading Cx meetings, assisting the construction team with identifying/solving technical issues when they arise, and interpreting contract documents to predict scope gaps, maximize opportunities to provide value for clients, and reduce risk. Administrative activities include supporting the Team Leader in coordinating weekly staff scheduling, training/mentoring team members on proper documentation, field procedures, and equipment usage, participating in and leading sessions of the company-wide developmental safety and training programs, and supporting revenue targets and quality assurance goals by expanding relationships with existing clients. Candidate must be able to travel to and from various job sites within the assigned region. Requirements: • Completed a Bachelor’s degree in HVACR, Mechanical or Electrical Engineering, Construction Management OR an Associate’s degree in Engineering Technology OR related trade school, construction, maintenance, or engineering controls experience, • 7+ years employment in a staff or intern position related to maintenance, construction, or engineering controls OR 3+ years in the Cx industry, • 5+ years of experience managing the interconnectivity of building equipment including pumps, fans, motors, air ventilation, chillers, boilers, steam distribution, heat absorption, building automation systems, optimization techniques, electrical distribution, fire alarm, variable refrigerant flow, and waste-water systems., • Knowledge of construction drawings, specifications, bid process, and ancillary industry documents, • Aptitude to solve problems independently and in a team environment, • Effective verbal and written communication skills, • Public speaking and presentation skills, • Adaptability to varying indoor and outdoor working conditions, • Physical fitness, capability to lift at least 30 pounds, and ability to climb ladders, • Proficiency in Microsoft Office, • Preferred Qualifications:, • Trade Association involvement, • EIT, ACP, CEM, or similar certification from experience, • OSHA 30 or other safe workplace certifications, • Familiarity with building information modelingSalary: $110,000 - $140,000 DOE FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future. Powered by JazzHR ZQKVdsSvfF

Job Description Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity’s Built Environment division, combining its deep expertise in high-performance building systems with Trinity’s strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B’s capabilities and offers employees: • Access to a broader portfolio of international projects and clients, • Enhanced career mobility across Trinity’s global network, • Interdisciplinary collaboration with experts in sustainability, environmental science, and digital infrastructure About the Role: We are seeking a Senior Engineer to join the Field Department in our New York office. The ideal candidate would be within commutable distance to Long Island. The Senior Engineer has a strong knowledge of design, the project process, and the interdisciplinary coordination needed with other engineering trades. The Senior Engineer is able to effectively collaborate with team members to ensure designs meet the standards of the Owner, JB&B, or another Design Engineer. The Senior Engineer is expected to positively contribute to the office environment, work closely with senior staff to complete tasks, and participate in office activities. Key Responsibilities: • Reads, understands, and interprets construction documents (e.g. design drawings, submittals, etc.), • Develops equipment-level testing procedures based on understanding of project documentation., • Assists in development of system-level testing documents., • Directs equipment-level testing to confirm operation in accordance with project requirements., • Reads, understands, and interprets industry standards, guidelines, and certification programs (e.g. LEED, WELL, ASHRAE, etc.)., • Implements project processes to meet industry certification programs., • Performs review of equipment performance data (e.g. BMS trend data, field measurements, etc.) and identifies normal and abnormal operational characteristics., • Conducts project site surveys and records technical information., • Bachelor’s degree in Engineering or related discipline from an ABET accredited program., • Minimum of 2+ years of experience., • Has a basic understanding of miscellaneous design software tools applicable to MEP design (such as Revit and AutoCAD)., • Has a fundamental understanding of Energy and Building Codes as they relate to Field., • Has an advanced understanding of documentation formats and content for each deliverable phase (ie: preconstruction, construction, turnover, and close out)., • Has knowledge of how to troubleshoot various field-related issues, • Understands basic proposal/add service and scope language., • Legacy + Innovation: Our company blends a rich history with forward-thinking design, including smart building systems and deep carbon reduction strategies., • Collaborative Culture: With over 400 professionals, our company fosters mentorship, teamwork, and continuous learning., • Global Impact: Now part of Trinity, our company offers opportunities to work on transformative projects across commercial, healthcare, aviation, life sciences, and data center sectors., • Multiple office locations: New York, Boston and Philadelphia. What We Offer, • Hybrid workplace offering the flexibility to work both from home and the office, • Comprehensive benefits package including 401k employer match and stock options, • Paid time off (PTO), volunteer program and employee resource groups Jaros, Baum & Bolles is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR jWkgHnb5yJ

Job Description Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity’s Built Environment division, combining its deep expertise in high-performance building systems with Trinity’s strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B’s capabilities and offers employees: • Access to a broader portfolio of international projects and clients, • Enhanced career mobility across Trinity’s global network, • Interdisciplinary collaboration with experts in sustainability, environmental science, and digital infrastructure About the Role We are seeking a qualified Building Systems IT Engineer to join our New York office. At JB&B, you'll provide exceptional service to clients and handle both technical and non-technical tasks such as research, analysis, design, and documentation. Ideal candidates are eager to learn new skills and will collaborate with senior leaders, including Partners on client projects. Key Responsibilities • Designs technology room fit-out and coordination of MEP elements within technology rooms, • Assembles and understands riser diagrams, schedules, floor plans, • Plans and coordinates routing of major distribution, • Performs all calculations including cable conduit fill, heat loads, and power receptacle requirements for technology equipment Minimum Qualifications, • Bachelor’s degree in Engineering, Computer Science, Information Technology, or similar field, • 1-2 years of experience utilizing Revit 3D modeling tool, • Possess relevant experience through internships and coursework, • Experience with applicable design software tools (including AutoCAD), • Basic understanding of the electrical coordination required with other tradesWhy Work at JB&B?, • Legacy + Innovation: Our company blends a rich history with forward-thinking design, including smart building systems and deep carbon reduction strategies., • Collaborative Culture: With over 400 professionals, our company fosters mentorship, teamwork, and continuous learning., • Global Impact: Now part of Trinity, our company offers opportunities to work on transformative projects across commercial, healthcare, aviation, life sciences, and data center sectors., • Multiple office locations: New York, Boston and Philadelphia. What We Offer, • Hybrid workplace offering the flexibility to work both from home and the office, • Comprehensive benefits package including 401k employer match and stock options, • Paid time off (PTO), volunteer program and employee resource groups, • Training and professional development courses through JB&B University Estimated compensation range: $79,000-$82,000 annual salary Jaros, Baum & Bolles is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR 6i2a9KDPCS

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at You'll Do To accelerate datacenter deployment and management, CoreWeave is expanding its firmware engineering team to focus on developing and maintaining OpenBMC-based firmware for our next-generation Baseboard Management Controllers (BMCs). As a Senior Firmware Engineer, you'll design, implement, and maintain embedded firmware features that enable secure, scalable, and reliable control across CoreWeave's high-performance compute infrastructure. You'll work independently on complex components, collaborate closely with cross-functional teams, and help set best practices for firmware quality and performance. Key Responsibilities • Design & Implement: Develop and enhance OpenBMC firmware in C++ for CoreWeave's custom server platforms, contributing to key subsystems such as sensor management, power and thermal control, networking, and system monitoring., • Integrate & Debug: Collaborate with hardware design, platform software, and reliability teams to integrate firmware with new hardware and validate performance across diverse environments., • Optimize: BMC Performance and Harden Security, • Root Cause Analysis: Perform deep system-level debugging using tools such as GDB, JTAG, or logic analyzers to resolve cross-layer issues between hardware, firmware, and OS., • Automate & Validate: Contribute to continuous integration and automated testing frameworks for OpenBMC build and validation., • Document & Share: Maintain clear technical documentation and participate in design reviews to ensure consistency and maintainability across the firmware codebase., • Collaborate Broadly: Partner with other ICs and technical leads across CoreWeave's infrastructure engineering, hardware design, and operations teams to align firmware capabilities with platform and datacenter goals. Who You Are Minimum Qualifications • Experience: 4+ of professional experience in firmware or embedded systems development, including direct work with Linux-based OpenBMC firmware., • Proficiency in C/C++ for embedded systems., • Hands-on experience with OpenBMC, Yocto Project, and embedded Linux environments., • Familiarity with hardware interfaces and protocols (I2C, SPI, UART, GPIO, IPMI, DMTF Redfish), • Experience with hardware bring-up, board-level debugging, and sensor integration., • Comfort with Linux kernel configuration, device trees, and BSP-level integration., • Working knowledge of source code control system such as Git, • Comfort with debugging tools such as GDB JTAG and debugging over serial or remote consoles., • Basic scripting skills in Python or Bash for build automation and validation., • Strong problem-solving and analytical thinking; able to break down complex system-level issues., • Communicates effectively with peers across hardware, firmware, and operations teams., • Self-driven with a focus on delivering high-quality, maintainable code., • Thrives in a fast-paced environment and balances multiple priorities effectively.Preferred Qualification, • Experience developing CI/CD pipeline for firmware builds and regression testing, • Exposure to large-scale datacenter or HPC environments What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Currently we are looking for Professional Engineer Field Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $55hr - $70/hr Based on Certification & Experience Professional Engineer Field Inspector Role Overview The Professional Engineer (PE) Field Inspector provides advanced inspection, verification, and technical oversight services for Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, and the International Building Code (IBC), as applicable to each project. This position is responsible for verifying that construction activities, materials, installations, and systems conform to approved design documents, specifications, code requirements, and project standards. The PE Field Inspector serves as a senior technical presence on site, providing engineering judgment where required and supporting compliance-driven decision-making on complex or high-risk work elements. The role requires maintaining an active on-site presence during construction operations, witnessing required inspections and testing, and coordinating closely with contractors, construction managers, special inspectors, laboratories, and client representatives. The PE Field Inspector is expected to proactively identify deviations from contract documents, document non-conforming work, issue Non-Conformance Reports (NCRs) as necessary, and verify the implementation and effectiveness of corrective actions. This position plays a critical role in ensuring structural integrity, life-safety compliance, constructability alignment, and regulatory adherence, particularly on projects involving complex systems, specialty construction, or heightened oversight requirements. • Work responsibilities may include but are not limited to the following:, • Review and verification of complex or delegated design elements, • Oversight of specialty inspections and testing programs, • Engineering evaluation of non-conforming work and proposed corrective actions, • Field verification of structural, civil, MEP, and specialty systems, • Coordination with design engineers for field clarifications and RFIs, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one of the following: § Structural § Civil § Marine § Mechanical § Electrical § Fire Protection In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job DescriptionCompany Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. Job Description Position Purpose: Project Engineer – Performs commissioning of electrical systems. Must be a self-motivated & energetic professional. Must have understanding of building electrical systems design & construction. Must have experience with commissioning process of electrical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of electrical systems and related controls. Candidate will be responsible for reviewing project information; executing daily field activities; maintaining project documentation; assisting the Senior Project Engineer; and providing guidance to associate project engineers. This role requires the candidate to have technical competency, organizational skills and is expected to work well in a team environment. Primary Duties/Responsibilities: • Commission electrical distribution equipment and related controls, primarily in data center environments, including medium voltage systems., • Review system designs for compliance with client facility goals., • Assist with preparing plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment and measure results using test instrumentation., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with project teams to coordinate and execute field activities., • Review and provide input on commissioning project documentation and schedules., • Assist with submitting and maintaining daily commissioning reports., • Assist in the training of Associate Project Engineers., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with building equipment, including, but not limited to:, • Generator, • Generator Paralleling Switchgear, • High / Medium / Low Voltage Transformer (XFMR), • Uninterruptible Power Supply (UPS Systems), • Battery Systems, • Medium / Low Voltage Switchgear (SWGR), • Low Voltage Main Switchboards (MSB), • PLC Control, • Automatic and Semi-Automatic Switching Controls, • Electrical Power Monitoring System (EPMS), • Automatic Transfer Switch (ATS), • Static Transfer Switch (STS), • Power Distribution Unit (PDU), • Busways, • Remote Power Panel (RPP), • Grounding Systems, • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation.Qualifications Education/Experience/Background: • BSc/MSc in Electrical Engineering with 2 or more years with mission critical project experience, or relevant and applicable industry experience or a minimum of 4 or more years of experience in commissioning with mission critical project experience, or relevant and applicable industry experience., • Experience in Mission Critical facility commissioning essential., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously and work with limited supervision., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Knowledge & experience with InterNational Electrical Testing Association (NETA) test specifications., • Reasonable understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $110000 to $115000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Position Description A client of AlphaStaffHCM is seeking a motivated and enthusiastic Mechanical Engineer to join our dynamic engineering team. As a Mechanical Engineer, you will play a key role in the design, development, and testing of hardware components for our innovative projects. This position drives the mechanical design of server chassis for quantum photonic systems, the structural platforms that house, support, and stabilize quantum computing hardware ensuring precise integration of electronics, power distribution, cabling, cooling and optical components. This position offers a unique opportunity to be at the forefront of quantum technology, contributing to the advancement of groundbreaking solutions in the rapidly evolving field of quantum computing. If you are passionate about changing the world by empowering revolutionary new quantum technologies, we want to hear from you! Duties and Responsibilities • Closely work with engineering teams to review the product specification and design of chassis mechanical, thermal, system architecture to enable competitive, high quality server chassis products, • Support the development of several platforms based around classical and quantum photonics as a mechanical engineer., • Drive designs from concept to mass production, focusing on functionality, reliability, manufacturability and cosmetic requirements., • Create and publish detailed 3D CAD and 2D drawings for designs including GD&T, material selection and manufacturing methods., • Collaborate with external vendors and manufacturers to support product development, prototyping, and production readiness, • Cross-functional work with internal teams such as hardware, photonics, operations, and product managers to deliver products that meet performance, cost, and schedule requirements., • Participate in the prototyping and assembly of products and proof-of-concept models. Soldering work will be present., • Work closely with senior engineers to implement design changes and enhancements., • Maintain accurate documentation of design changes, test procedures, and project progress., • Prepare reports and presentations for detailed design reviews. Required Skills and Experience • Bachelor of Science (BS) or Master of Science (MS) in Mechanical Engineering, Product Design or related field from an accredited university., • Minimum 3-4 years of full-time experience in the design and correlation of mechanical components including: plastic or metal parts, mechanical assemblies, printed circuit boards or flexes., • Product development and management experience in server chassis mechanical, thermal, and system design, • Experience with server system architecture and server chassis layout optimization, • Experience in developing server product architectures and carrying through to production., • General technical knowledge in multiple manufacturing methods used in consumer products such as 3D printing, urethane casting, injection molding, sheet metal, CNC machining etc., • System integration experience, including electro-opto mechanical components (Optics, lens, Motors, Mirrors, translation stages etc.), heat transfer and product architecture, • Experience with using CAD tools such as Solidworks, NX or Creo, and PDM tools such as Solidworks PDM, Windchill (Solidworks and SolidworksPDM experience is preferred), • Familiar with product development cycles, • Experience working with manufacturing vendors and suppliers, • Ability to work in a startup environment., • Technical knowledge in general materials., • Able to lift weights up to OSHA limit (50 lbs.) when required (occasionally)., • Excellent problem-solving and analytical skills., • Excellent written and verbal communication skills., • Detail-oriented. Preferred Skills and Experience • Prior work on server chassis design or data center server hardware is highly valued, as it demonstrates familiarity with the unique challenges of complex system integration of optical, electrical, and mechanical components., • Experience with designing airflow paths, heat sinks, fans, or liquid cooling loops that keep cutting-edge systems within safe temperatures., • Strong understanding of compliance-driven design requirements, including EMI and ESD. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job Description About Voyant Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. The Opportunity We are seeking a Senior Production Test Engineer to lead the development and implementation of scalable, high-throughput test infrastructure for end-of-line testing for our integrated LiDAR sensor. You will be responsible for engineering and developing robust test methodologies with the goal of mass production for our LiDAR units. This is a highly cross-functional role working closely with Systems, Photonics, Electrical, Firmware, and Manufacturing Engineering teams to ensure performance, yield, and reliability from prototype to volume production. Key Responsibilities * Design and implement end-of-line (EOL) test strategies for LiDAR sensors, validating system-level performance (range, velocity, reflectivity, etc.). * Develop automated test fixtures and software to support both in-line and EOL testing in a production setting. * Translate lab-level validation methods into robust and scalable production tests across optical, electrical, and mixed-signal domains. * Partner with external contract manufacturers and test vendors to stand up and scale production test infrastructure; support factory bring-up and operator training. * Drive test coverage, throughput, and cost optimization in both low- and medium-volume manufacturing. * Lead root cause investigations for test failures across the stack and work cross-functionally to implement fixes. * Own and continuously improve statistical process control (SPC), yield tracking, and test data analytics across the production lifecycle. * Support reliability and environmental testing (e.g. thermal cycling, vibration, shock) for product qualification. Qualifications * Bachelor’s or Master’s degree in Electrical Engineering, Optical Engineering, Physics, or a related discipline. * 5+ years of experience in production test engineering with a focus on LiDAR systems or optical sensors. * Proven expertise in system-level testing for LiDAR, imaging, or other complex optical systems. * Hands-on experience developing and deploying automated test setups (Python preferred), including test instrumentation and DAQ systems. * Proven track record in statistical process control, yield analysis, and high-volume data-driven decision-making. * Demonstrated experience owning test strategy and implementation in a manufacturing or pilot-line environment. * Experience interfacing with contract manufacturers and external test vendors. Preferred Qualifications * Experience with test and validation FMCW LiDAR or coherent optical systems. * Exposure to MES systems, manufacturing analytics platforms, or test data infrastructure. Benefits * Competitive salary and meaningful equity package * Comprehensive health benefits (Medical, Dental, Vision) * Unlimited PTO and paid company holidays * Team events and company meetups * Hybrid or remote work environment with monthly travel for remote employees. * Complimentary lunch provided daily at our NYC office Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at You'll Do As a Firmware Engineer, you'll focus on AMI SPX-based BMC firmware development for GB200 server platforms. You'll collaborate with cross-functional teams to develop, enhance, and optimize embedded firmware modules that power CoreWeave's large-scale data center deployments. Key Responsibilities • Develop & Maintain: Contribute to the design, implementation, and testing of BMC firmware in AMI SPX environments using C., • Integrate: Work cross-functionally with hardware, software, and QA teams to ensure seamless firmware-hardware integration., • Debug & Optimize: Perform issue triage, root-cause analysis, and implement bug fixes and performance improvements., • Testing & Validation: Conduct firmware validation across multiple hardware revisions and test environments., • Document: Produce clear and maintainable documentation for code, configurations, and testing procedures., • 2+ years of Hands-on experience with AMI MegaRAC/SPX firmware., • 2+ years of professional experience in embedded systems or firmware development with a Bachelor's degree in Computer Engineering, Electrical Engineering, Computer Science, or related field., • Proficiency in C and embedded development workflows., • Familiarity with Linux, Git, and debugging tools (GDB, JTAG, or equivalent)., • Understanding of hardware interfaces (I2C, SPI, UART) and firmware build systems., • Awareness of BMC architectures, DMTF Redfish, and IPMI standards., • Strong debugging and analytical skills with an attention to detail., • Exposure to GB200 or other NVIDIA Grace Hopper server platforms., • Experience scripting in Python or Bash for testing or automation., • Familiarity with Jenkins or similar CI/CD environments. What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description T&M Associates is seeking a Senior Staff Designer / Engineer with 4+ years of experience to join one of our New Jersey Offices. This position will be in the MEP Practice with a primary focus on plumbing and fire protection engineering. Qualifications: • Design of plumbing and fire protection systems for buildings. This may include domestic hot and cold water, sanitary and vent, storm drainage, natural and medical gas, compressed air, sprinkler, fire pump, and clean agent fire suppression systems., • Preparation of construction documents including calculations, drawings, details, and specifications., • Construction administration services such as site visits, construction meetings, review of submittals, and responding to RFI’s., • B.S. in Mechanical Engineering or a related field required., • EIT Certification or PE License is preferred, not required., • 4+ years prior experience in designing plumbing and fire protection systems., • Experience with and knowledge of Microsoft Word, Excel, AutoCAD and Revit required., • Ability to interact with all levels of employees, especially Mechanical, Electrical and Structural Engineers., • Willing to learn new interesting technical fields., • Excellent written and verbal communication skills., • Ability to work on several projects at once. T&M Associates offers a competitive and comprehensive benefits package designed to support the health, well-being, and professional growth of our employees. Benefits include comprehensive insurance (medical, dental and vision), a 401(k) with company match, paid time off, flexible work schedules, wellness programs, and professional development opportunities — all within a people-first, award-winning hybrid work environment. See more details about benefits here. If this sounds like a company you want to be part of then apply now! New Hires must have documents indicating they are eligible to work in the United States. EEO/AA Employer. #LI-HYBRID

Job Description Energy Engineer - Mid-level (NY) This role will be an integral part of our expanding team and services to provide commissioning, energy auditing, and retrofit services to multifamily, commercial, institutional, cultural/art center, and community center buildings in the NYC Metropolitan area and beyond. The role involves work on the NYC Accelerator Program, developed by the Mayor’s Office of Climate and Sustainability. This program provides free, personalized guidance for buildings throughout the five boroughs, with the aim of reducing city-wide building energy consumption and greenhouse gas emissions. We are looking for qualified individuals for our New York City office. The successful candidate will demonstrate the ability to complete the following tasks with the technical and interpersonal skills outlined below that will help him or her excel at USL. This posting is for a mid-level position (2-5+ years of experience). USL’s NYC office is not fully reopened due to COVID-19. These positions will require site visits but will otherwise be a work from home position, initially. This position reports to a Senior Engineer / Consultant. Primary Responsibilities for the position will include: • Perform project work for:, • Commissioning projects for new construction and existing building retrofits., • Benchmarking, energy auditing, and retro-commissioning for existing buildings., • Complete technical project work including:, • Review construction documents and provide recommendations to improve. constructability, indoor air quality, energy efficiency, and operations., • Review submittals, code requirements, and develop testing plans., • Inspect installations of building equipment., • Review and perform both central plant and terminal unit functional testing., • Perform trend analysis., • Lead development of energy savings strategies and calculations., • Review energy savings calculations of others for correctness and for adherence to incentive and clean energy financing program rules., • Provide written technical and non-technical issue log findings and reports for program compliance and ownership review., • Perform project work for the NYC Accelerator Program, • Collaborate internally across teams to collate best practices and the latest reports/case studies on high performance new construction strategies, energy efficiency technologies, and training strategies., • Assist with the analysis of large data sets for existing and new building database compilation., • Assist with the development of written technical resources for the program to convey building science technologies to industry stakeholders., • Work with internal stakeholders including project managers, energy modelers, sustainability consultants, accessibility consultants, etc., • Assume primary responsibility for the execution of small projects including project financials., • Lead communication with building owners, developers, architects, engineers, and contractors., • Train Entry Level staff members when applicable. Knowledge, Skills, and Abilities Below is a list of the minimum requirements for the position. Required industry knowledge, and skills • Bachelor’s degree in Engineering., • 2 – 5+ years of relevant and consecutive work experience. Work experience relevant to this position must include experience with HVAC systems in large multifamily or commercial buildings., • Experience conducting field inspections related to mechanical, electrical, and plumbing equipment., • Experience working with large data sets., • Experience managing small to mid-size projects., • Understand common HVAC systems and emerging high-performance alternatives. Familiarity with: • LEED Rating Systems., • Utility billing analysis and energy savings spreadsheet calculations., • Energy Code and/or ASHRAE standards., • NYC Local Laws related to energy and climate (Local Laws 84, 87, 95, and 97), • Excellent communicator and presenter able to explain complex concepts to a variety of stakeholders., • Attention to detail., • Strong oral and written communication skills., • Well-developed interpersonal skills, maturity, credibility, confidence, and integrity., • Strong time-management skills and experience managing multiple priorities at once., • Collaborative with strong focus on teamwork., • Excellent work ethic., • Self-motivated., • Passionate about optimizing MEP systems and improving the built environment. Duties, responsibilities, and activities may change at any time with or without prior notice. Physical Demands: While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to type, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. When in the field the employee must frequently lift or move objects up to 20 pounds; must be able to climb stairs and endure typical construction site conditions. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Travel Required: Occasional overnight travel may be required (Less than 10%). Frequent local field visits in the Office Metro area will be necessary (estimated at 40-50%). A valid and clean driving license is required. Working Environment: Approximately half of the duties will be performed in an office environment. The remainder of the duties will be performed in the field which will involve trips to projects sites for observation and training. Performance Standards: Performance will be evaluated against this job description, competencies for this level, and mutually agreed goals Applications submitted without a cover letter will not be reviewed EQUAL EMPLOYMENT OPPORTUNITY USL Technology Consulting Inc. is committed to diversity in its programming; creating a work culture and inclusive environment that is reflective of New York City demographics. USL encourages and actively recruits applicants representing dimensions of diversity that include — but are not limited to — military service, age, national origin, ethnicity, race, religion, ability, sexual orientation, gender, or political affiliation. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. Company DescriptionAt USL Technology, we are guided by a collective sense of purpose, an important differentiator in attracting talent. Performance is the only route for us to remain competitive. We appreciate and recognize our enthusiastic buy-in to our core purpose backed by a powerful sense of collective pride and a respect for individual’s/your need to grow. We are bonkers or shall be say maniacal about driving high performance, but we are also a family! We continuously strive to deliver Smart Sustainable Solutions. We are a technology, sustainability and energy engineering consulting firm that focuses on a system thinking approach on high-performance building working with building owners, architects, contractors and design engineers to help owners comply with the local laws and deeper energy retrofit implementations.At USL Technology, we are guided by a collective sense of purpose, an important differentiator in attracting talent. Performance is the only route for us to remain competitive. We appreciate and recognize our enthusiastic buy-in to our core purpose backed by a powerful sense of collective pride and a respect for individual’s/your need to grow. \r\n\r\nWe are bonkers or shall be say maniacal about driving high performance, but we are also a family!\r\n\r\nWe continuously strive to deliver Smart Sustainable Solutions. We are a technology, sustainability and energy engineering consulting firm that focuses on a system thinking approach on high-performance building working with building owners, architects, contractors and design engineers to help owners comply with the local laws and deeper energy retrofit implementations.

Job Description Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Job Summary We are seeking an energetic, registered architect/licensed civil/structural engineer with strong experience in building façade projects, FISP inspections and familiarity in handling building façade projects in New York city area. The Senior Facade Architect/Engineer is responsible for leading and managing building façade architectural and engineering projects, overseeing design development, providing technical expertise, and ensuring the successful delivery of projects within scope, budget and timeline. Responsibilities and Duties: • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Coordinates the recording of accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand and review investigation reports and bid documents, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicate the feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry., • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Special Requirements Technical • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations and drawings., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities., • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies., • Able to serve as an expert witness and depositions, mediations, or litigation., • Conducts a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success. Education • Professional Engineer or Registered Architect license required., • Maintain compliance with licensing requirements and applicable regulations., • OSHA-10 Certification, • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, standards and familiarity with FISP inspections and local law regulations on inspections., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed. Lifting • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%). Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR vNQ6EEkP4a

KEY RESPONSIBILITIES: Investigate and resolve technical issues related to RF, analog, assembly, SMT, and testing Perform root cause analysis at the component level using simulation and experimentation Provide guidance and mentorship to junior engineers, leading technical investigations Mitigate comp

The role includes system design, test automation, and providing guidance to early-career engineers. Responsibilities: Design, develop, and debug software for control and automation of test and measurement equipment using NI LabVIEW.

KEY RESPONSIBILITIES: Investigate and resolve technical issues across RF, analog, digital, assembly, SMT, and testing domains Perform root cause analysis at the component level using simulation and experimental methods Support new product introductions by collaborating with design engineering and tr

GForce Life Sciences to provide a Senior Electrical Engineer. Professional Engineer (PE) will have expertise in electrical systems including electrical distributed power generation, feeds, distribution, lighting, fire alarm, emergency power, UPS, and low voltage systems. Collaborates with the Projec

We are currently seeking a Senior Electrical Engineer/Project Manager to join our Power Group in our NYC office. Execute electrical designs and deliverables for power engineering, cogeneration power plants, chiller plants, and large industrial projects. Strong understanding of IEEE, IBC, NESC, and N

Electrical BIM Engineer leads the engineering, design, and technical coordination of electrical construction projects, ensuring compliance with project requirements, industry standards, and client expectations. Coordinate with architects, structural engineers, mechanical engineers, and other trades

Bachelor's degree in Electrical or Electronic Engineering, or Electrical Technology or related discipline. We have multiple openings for Senior Professional Electrical Engineers. As a Senior Professional Electrical Engineer, you will:.

A global consulting firm based in New York is seeking an experienced Electrical Engineer II - III to create designs for landmark projects. The ideal candidate will possess a bachelors degree in electrical engineering, relevant experience, and skills using REVIT and AutoCAD MEP.

Collaborate with exceptional engineers developing cutting-edge AI/ML hardware. Review power designs and work closely with power engineers. Mentor and grow junior engineers.

Job Title: Senior Specialist, Electrical Engineer (Digital Design) Job Code: 34606 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: The L3Harris Communication Systems segment is see

Een toonaangevend ingenieursbureau in de Verenigde Staten is op zoek naar een Senior Electrical Engineer. Je werkt binnen de discipline Electrical, Instrumentation & Process Control en bent verantwoordelijk voor het ontwerpen van complexe elektrotechnische systemen.

Job Title: Senior Specialist, Electrical Engineer (Digital Hardware Design) Job Code: 34694 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: Join our team as a Digital Hardware Engi