Trabajos site engineer en Commack, New YorkCrear alertas

Civil Engineering Project Engineer and Project Manager – Land Development Nelson + Pope is seeking a qualified Project Engineer with 4+ years of experience and a Project Manager to work in the Land Development Department in our Melville, New York office for an immediate start. The work includes site/civil design and permitting for residential, multi-family, commercial, industrial and retail projects. Responsibilities/Top Skills/Qualifications: • design, permit and construction plans & specifications, • site planning, • grading and drainage, • knowledge of local permitting agencies and regulations a benefit, • client & contractor coordination, • AutoCAD / Civil3D, • proficient in Microsoft Office, • good verbal communication, written communication, and organizational skills Management Responsibilities/Qualifications: • management and training of staff, • billing / collections, • proposals, • NYS PE license preferred Nelson + Pope offers a competitive salary commensurate with level of education and professional experience and offers strong health, paid time off, work life balance, 401K, and other benefits. Extensive learning and educational work environment with strong day to day mentorship as well as formal training opportunities. Candidates must have a valid driver’s license and be willing and able to commute to our Melville office for this on-site position (non-remote). Non-local candidates are encouraged to apply and relocation assistance may be available where appropriate. The interview process is succinct. Nelson + Pope is proud to be an Equal Opportunity and Affirmative Action Employer. We evaluate qualified applicants without regard to race, color, national origin, religion, sex, sexual orientation, gender identity, disability, protected veteran status, and other statuses protected by law. In compliance with the Immigration Reform and Control Act of 1986, we will hire only U.S. citizens and aliens lawfully authorized to work in the United States (if the position is or will be one which is subject to U.S. law). Verification of employment eligibility will be required at the time of hire. Salary Range: $80K to $160K

Since 1969, Sensitron Semiconductor has been a manufacturer of discrete semiconductors and microelectronics for aerospace, defense, medical, and other high reliability markets, and applications. Our long-term success can be attributed to the talent, creativity, and dedication of our employees. Sensitron strives to create an environment in which all employees can reach their full potential and recognize their contribution to the growth of our company. Your journey to success starts here! Position Overview Sensitron is seeking a motivated Junior Mechanical Engineer to support the design, prototyping, testing, and production of mission-critical space, aerospace, and defense products. This role offers exceptional hands-on experience and direct exposure to real-world engineering challenges in a fast-paced, highly collaborative environment. Unlike large corporations where junior engineers are often siloed into narrow roles, this position offers broad exposure across product design, prototype development, manufacturing, testing, vendor coordination, and customer interaction. High performers are given increasing technical responsibility and advancement opportunities based on demonstrated capability and initiative. Key Responsibilities • Assist senior engineering personnel in the design and development of new products from prototype through production, • Develop engineering drawings, documentation, fixtures, and mechanical components, • Build, assemble, and test functional prototypes and product concepts, • Support product testing, troubleshooting, root cause analysis, and continuous improvement efforts, • Coordinate with vendors, suppliers, and manufacturing partners as required, • Participate in design reviews and engineering problem-solving activities, • Communicate with customers via phone, email, and occasional face-to-face interactions, • Manage multiple projects and priorities in a fast-paced engineering environment, • Maintain organized engineering records and documentation Opportunity to Gain Experience In • Real-world product design and development, • Prototype fabrication and hands-on engineering, • Design for manufacturability (DFM), • Mechanical and thermal system integration, • Engineering testing and validation, • Vendor and manufacturing coordination, • Aerospace and defense product development environments Required Qualifications • Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or related engineering discipline, • Strong interest in aerospace, defense, electromechanical, or high-reliability product design, • Comfortable building, assembling, and troubleshooting physical products and prototypes by hand, • Strong organizational, project management, and time management skills, • Able to work independently as well as collaboratively within a team environment, • Detail-oriented with strong verbal and written communication skills, • Proficient in Microsoft Word, Excel, and PowerPoint, • Proficient in SolidWorks and AutoCAD, • Travel less than 10% Preferred Qualifications • Experience with ANSYS or other engineering simulation tools, • Hands-on machining, fabrication, or maker/project experience, • Formula SAE, robotics, drone, RC, or similar technical project involvement, • Military or technical service background, • Familiarity with electronics or electromechanical systems Additional Information • This is an on-site position due to the hands-on nature of prototype and product development work., • This position requires access to technology, material, software, or hardware that is controlled by U.S. export laws. In order to be eligible, applicants must be either a U.S. citizen or permanent resident., • Sensitron is an equal opportunity employer offering competitive compensation, medical/dental benefits, and a 401(k) package., • Veterans are strongly encouraged to apply. The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining a team member's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, service line, years of relevant experience, education, credentials, budget and internal equity).

Job Locations US-NY-Hauppauge ID 2026-5900 Category Engineering Type Regular Full-Time Career Stage Type Experienced # of Openings 1 ABOUT THE POSITION Project Manager - Land Engineering | Hybrid | Hauppauge, NY VHB's growing Hauppauge, NY office is seeking a Senior Civil Engineer/Project Manager to join our Land Engineering team. This position provides an opportunity to work on complex multi-disciplined projects for major institutional, industrial, coastal and real estate clients along with local and state government and plays an important role in expanding and shaping the civil engineering team. 2025 U.S. Best Managed Company, National Recognition • 2025 and 2024 LIBN, Real Estate Architecture & Engineering Awards for Top Firm, Lifetime Achievement, Top Engineer, Top Education & Healthcare Projects, • 2024 ACEC, Engineering Excellence Awards, National Recognition, • 2024 Institute of Transportation Engineers, National Achievement Award, • 2024 ACEC Inaugural (DEI) Commitment Award Responsibilities • Develop site/civil engineering plans and specifications for a multitude of projects in the Industrial, Institutional, Real Estate, Coastal and Energy Market, • Help build and lead a multi-dimensional team of civil engineering professionals, • Provide technical and career guidance as a mentor to staff Manage small, medium, and large project tasks, • Assist in the development project opportunities and manage proposal submissions, • Support preparation of land development design and permitting documents, • Assist in project task scope, budget and schedule management, • Prepare and review drawings and specifications documenting the systems designed, • Attend meetings with clients, regulatory agencies, boards, commissions, utility providers and stakeholders to establish their needs and discuss design/permitting issues, • Supervise design team activities during Construction Administration Skills and Attributes • Excellent verbal, written, and interpersonal communication skills, • Proficient in site layout, grading, utility design erosion/sediment control, and stormwater management, • Experience with real estate projects, institutional and energy projects a plus, • An understanding of other civil engineering or geomatics disciplines such as land survey, traffic engineering or highway design is a plus, • Ability to think critically and multitask, • Strong computer skills (CAD & MS Office), • Exhibits leadership skills, • Excels working in an integrated service team environment, • Attention to detail, • Self-motivated Qualifications • Bachelor's degree in Civil Engineering or related field, • 5-8+ years of professional civil design engineering experience required, • PE licensure required, • Understanding of the Long Island marketplace a plus, • Experience with abilities of AutoCAD, AutoCAD Civil3D, and/or MicroStation, • Direct client and project management experience Our best estimate of the salary range for this position located in Hauppauge, NY is $105,000-145,000. The final compensation will be based on a variety of factors such as individual qualifications, education, and experience. Building what's next, together. Our people make the difference. We foster a technology-empowered, peopledriven, futureready culture where agility, innovation, and collaboration shape how we work every day. When you join VHB, you'll find: • Meaningful work on complex projects with real community impact, • A collaborative, inclusive culture that values curiosity and shared success, • Support to grow your skills and lead through change, • Learning and development supported by evolving tools and technologies, including AI, • Best-in-class benefits and a flexible, hybrid work environment We're growing across the East Coast and are consistently recognized as a great place to work. Ready to shape what's next? Learn more about what sets our employee experience apart and connect with us. VHB is a proud Equal Opportunity Employer. Since our founding, we have intentionally fostered a culture of inclusion and belonging, supported by deep-rooted core values, one of which is diversity. Qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or other characteristics protected by law. #LI-LO1 #LI-Hybrid We can recommend jobs specifically for you! Click here to get started.

Job Description Our mission at iRocket is frequent, affordable access to space. We’re hiring a Launch Engineer to manage end-to-end launch operations, integration, vehicle readiness, and mission execution across sites. The Role • Support vehicle assembly, integration, test (AIT), rollout, countdown, and flight operations., • Develop check-lists, execute vehicle/pad/environment checkouts, manage anomaly response during launch campaigns., • Coordinate with propulsion, avionics, structures, safety, and logistics teams to ensure mission readiness., • Monitor launch-site infrastructure, support logistics, GSE, and range coordination., • Review data post-flight, identify metrics for cadence improvement, and feed lessons into future campaigns. Requirements • Bachelor’s degree in Engineering or related field., • 3+ years of launch operations, systems integration, or mission-execution experience (space or defense sector preferred)., • Strong organizational, communication, and problem-solving skills; comfortable in high-stakes environments., • Availability for travel and variable hours during campaigns; dynamic startup-pace experience preferred. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description CBIZ Talent Solutions is seeking a Facilities Engineer for their Suffolk County Property Management client. This is a hands-on role supporting a multi-building property, responsible for maintenance, repairs, and preventive care across building systems, grounds, and amenities. Key Responsibilities: • Perform repairs and maintenance across HVAC, electrical, plumbing, carpentry, and general systems, • Execute preventive maintenance and manage work orders, • Coordinate and oversee subcontractors; ensure safety and compliance (OSHA), • Inspect buildings and identify maintenance needs, • Support site operations (landscaping, snow removal, events, etc.), • Participate in on-call rotation for after-hours emergencies, • Maintain tools, inventory, and documentation Requirements: • 5+ years of facilities/maintenance experience, • Strong mechanical and electrical knowledge, • Valid driver’s license with clean record, • Ability to manage multiple priorities and respond to emergencies, • Strong communication and organizational skills Preferred: • Commercial real estate experience, • Experience with Yardi, Procore, or work order systems Compensation: $75,000–$80,000 + benefits and 401(k) with match CBIZ Talent Solutions is an Equal Opportunity Employer. CBIZ Talent Solutions does not discriminate on the basis of race, ancestry, national origin, color, religion, sex, gender identity, age, marital status, sexual orientation, disability, veteran status, or any other protected classification under the law.

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate has minimum of 4-8 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities include, but are not limited to: • Manage projects, staff and clients., • Work with multi-disciplinary teams on tasks such as work zone traffic, intersection design, traffic signal design, roadway signing and pavement marking plans, DOT access permitting, control plans and traffic signal operations analysis., • Assist in the preparation specifications, plans, construction schedules, impact studies, permits, and designs for projects., • Assist with traffic/parking studies, corridor planning, feasibility studies, and safety audits., • Coordinate with field inspection staff and serve as an on-site project representative. Job Requirements • Bachelor’s Degree in Civil Engineering, • Professional Engineering (PE) license in NY required (or ability to obtain within first 6 months), • Professional Traffic Operations Engineer (PTOE) desirable, • Excellent oral and written communication skills, • Experience with design standards, NYSDOT/NYCDOT/CTDOT/NJDOT experience (desirable), • Knowledge of CADD Software (MicroStation or AutoCAD), • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Salary Range: $90,000 - $120,000 Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for, for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public and are dedicated to Moving Forward Together.

Job Description Groundwater & Environmental Services, Inc. (GES), an industry leader with a reputation for excellence in providing environmental consulting, engineering, compliance, and technical field services to clients in diverse market sectors, seeks a Junior to Mid-level. Engineer. This is a position for a detail-oriented, team player with strong communication, analytical, organizational, problem solving, and time management skills. The position will report to a Principal Engineer, and work under the supervision and mentorship of other engineers, project professionals, and field technicians in a collaborative and safety conscience environment. The selected candidate will be integrated into our Northeast Region engineering team working across multiple states in New York and New England. Candidate will work out of the Islandia, NY. Duties and Responsibilities: • Perform groundwater and vapor treatment system engineering calculations, • Perform remediation system and laboratory data tabulation, evaluation, and report preparation, • Completion of materials/equipment/supplies specification and procurement, • Subcontractor scope of work development, coordination, and contracting, • Assist with cost estimates and support proposal efforts, • Preparation of remedial action plans, pilot test workplans, site conceptual model development, • Preparation of permit applications and compliance reports, • Coordination directly with subcontractors, vendors, and laboratories, • Coordinate field tasks associated with operation and maintenance (O&M) of remediation systems (e.g., data collection, system sampling, system cleaning, carbon replacement, etc.), system installation, excavation projects, and remedial injections, • Perform field work including remedial system O&M, pilot testing, remedial in-situ injections, groundwater sampling, collecting environmental and permit compliance samples, soil excavation, contractor oversight for trenching, piping & system installation, • Perform other related duties as assigned, • Travel within the Northeast region to perform field work as necessary, • Coordinate, participate in, and complete Health and Safety related field observations and documentation Skills & Requirements: • A Bachelor's degree or higher in Engineering (Environmental, Chemical, Civil), • 3-5 years of related environmental consulting experience, • Must be resourceful with excellent communication and writing skills and possess a high degree of initiative and time management skills, • Engineer-in-Training (E.I.T.) certification or Professional Engineer registration is a plus, • Stormwater or civil engineering experience is a plus, • Mechanical aptitude and experience with basic hand tools is a plus, • Field work requires wearing personal protection equipment and working outdoors in all seasons Our comprehensive benefits program includes: Hybrid workforce, medical, dental, vision, prescription, 401k, FSA, STD, LTD, New Parent Leave, 529 CollegeBound Fund, Tuition Assistance, Bonus Plan, and more. Groundwater & Environmental Services, Inc. (GES) believes that diversity and inclusion among our staff is critical to our success, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. At GES, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees without regard to race, color, religion, gender, pregnancy, national origin, age, disability, marital status, sexual orientation, gender identity or expression, military and veteran status, and any other characteristic protected by law.

Job Description K&A Power Group – is a privately held engineering firm delivering worldclass technical expertise and engineering excellence to power utility and industrial clients across the United States, Asia, the Middle East, and Africa. We provide comprehensive consulting, engineering and design, program and project management, construction management, and EPC services, specializing in substation, transmission, distribution, and distributed energy resources. We pride ourselves on attracting and developing top talent, building a culture of excellence, and building meaningful, long-term relationships with our employees, clients and communities, wherever they are in the world. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled [Position Name] to join our team at K&A Power Group in [Location]. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Field Support to Resolve Problems – Being Proactive, • Must do Reporting – Weekly Report, Monthly Reports, tracking of weekly PayId’s completed., • Monitor Schedule - Look Ahead vs. PM, • Attend the contractor’s Safety, Environment and Quality meetings; provide a tip in the onsite meeting., • Maintain and update as needed the onsite H&S, Environment and Quality project binder., • Be organized, and document all project progress to provide a good paper trail, • Review contractor invoices and schedules and provide feedback., • Conduct weekly project progress meeting. Request the contractor two week look ahead schedule at each weekly meeting., • Present onsite when work is being performed (make frequent observation of contractor’s activities)., • Immediate notification to PM of all problems or foreseeable issues throughout construction, or any complaint presented by the general public., • Coordinate Material delivery between Customer Stockroom, and Contractor., • Inspect all project related construction material for damage and completeness for the project execution., • Inspect work in progress to ensure that workmanship conforms to specifications, quality and adherence to construction schedules., • Facilitate resolving construction problems, discrepancies, procedures, and methods by working with engineering personnel, inspectors, contractors and suppliers. Must have strong communications skills., • Minimize Change Orders. Support Project Manager to review any requested Change, • Orders/Notices or other claims submitted by Construction Contractors which relate to additional payments, schedule adjustments or other modifications to the Project, and make such recommendations to the PM regarding the legitimacy of such claims and review the, • Construction Contractor’s proposed mitigation., • Review and understand the project documentation and any related documentation and provide input to enhance the constructability of the Project, taking into account schedule, cost and quality considerations., • Maintain a daily on-site as-build project plans., • Continuously communicate (written and verbally) with the associated PM., • Adhere to company policies, programs and procedures as well as Critical Infrastructure, • Protection (CIP). Ensure all requirements are maintained throughout the project execution, • Promote a proactive safety culture by encouraging open communication, reporting unsafe conditions, and suggesting improvements to safety practices., • Diligently ensure compliance with safety regulations, conducting safety inspections, and identifying potential hazards to mitigate risks and maintain a safe working environment for all personnel. What we’re looking for: • Minimum of five (5) years’ experience in progressive related electric utility industry experience, with transmission facilities construction management, • Two (2) years of college is preferred, • Construction Project Engineer Background Preferred, • Distribution line work experience required, • MS Suite Required – with high competency in MS Excel, • Knowledge of NRA clearances and switching orders would be beneficial, • Applicants should have the knowledge, experience and skills needed to review project plans, specifications, contract enforcement, and applicable technical standards, OSHA and other regulatory statutes., • Detailed work experience in electrical Utility transmission UV/OV & civil construction, • Must have current US Work authorization and valid US Driver License in good standing, • Minimum of 5 years of supervisory capacity experience, • Knowledge of GPS Systems & knowledge of SAP are preferred, • Ability to read and interpret specifications and drawings and convey interpretations to contractors, • Ability to investigate and solve construction problems in a timely manner with minimum dependence on others, • Computer and Administrative skills, • Strong verbal, written and interpersonal communication skills, • Must be able and willing to attend training in E-STAR/CONVEX (switching and tagging)., • Initiate distribution outage requests for project work through E-STAR and/or CONVEX. Pay Range $40—$46/an hour Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with company match), • Lifestyle Spending Account (LSA), • Paid Parental Leave after 12 months of employment, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program), • Parking and Transit Reimbursement, • Pet Insurance Check out our career page for more information! The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Drive configuration management, test-to-flight traceability, and audit readiness. Requirements • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Excellent communication and documentation skills. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description A multi-discipline consulting firm is seeking a Project Wastewater Engineer for their growing team in Huntington, New York! Responsibilities: • Perform various engineering tasks including wastewater collection, conveyance, and treatment processes, • Lead engineering evaluations, • Prepare design calculations, reports, plans and specifications, • Perform construction administrative tasks (construction phase management activities, coordinate shop drawing reviews, RFI responses, develop construction change orders), • Communicate directly with clients, • Confirm accuracy of plans/specifications, • Perform field activities (site investigations, witness testing and milestone construction observation), • Supervise/manage junior staff, • Assist with business development (write technical proposals/assist with budgeting), • Lead pursuit of small to moderate size projects Requirements: • BS in Engineering (Civil, Environmental, Chemical or Mechanical), • 5+ experience in design of wastewater treatment plants, collection and conveyance systems, and alternative onsite treatment systems, • PE License or ability to obtain in six months, • Microsoft Office Suite experience (Word, Excel, Access, Teams, Outlook), • Knowledge of Autodesk Revit and Civil 3D software Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Job DescriptionDescription: The Field Engineer is a highly technical, field-based role responsible for supporting the installation, commissioning, startup, testing, and operational performance of industrial standby and prime power generation systems. This role plays a critical part in ensuring generator systems, paralleling switchgear, automatic transfer switches (ATS), and control systems are installed, commissioned, and operating safely, reliably, and in accordance with design specifications. The Field Engineer works closely with Project Managers, Field Service Technicians, electrical contractors, and customers to deliver high-quality power system installations across Kinsley’s Northeast service territory. Installation Review & Field Execution: • Review electrical one-lines, wiring diagrams, control schematics, and submittals to ensure proper field execution., • Support installation teams in identifying scope gaps, constructability issues, and technical discrepancies., • Conduct site visits to monitor installation progress and document deficiencies. Generator Commissioning & Startup: • Develop and execute pre-functional and functional startup checklists., • Lead commissioning of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • Automatic Transfer Switches (ATS), • Load banks and associated controls, • Document commissioning results and provide turnover packages. Troubleshooting & Technical Support: • Diagnose and resolve complex electrical, mechanical, and control-related issues during startup and post-installation., • Support Field Service Technicians with advanced troubleshooting., • Analyze generator performance data to identify reliability concerns., • Assist in root cause analysis of system failures. Controls & Integration: • Support configuration and testing of:, • Generator controllers, • Paralleling logic and synchronization systems, • Remote monitoring systems, • Ensure proper integration of generators into facility electrical infrastructure. Customer Interface & Training: • Serve as the technical lead during startup and commissioning., • Provide customer training on system operation, emergency procedures, and maintenance requirements., • Deliver clear commissioning documentation and test reports., • Ensure smooth transition from installation to service support. Qualifications: • Equivalent field experience considered., • Experience in industrial generator systems, power distribution, or mission-critical backup power environments., • Strong knowledge of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • ATS systems, • Load bank testing, • Engine controls and protection systems, • Working knowledge of NEC, NFPA 110, OSHA standards., • Proven ability to troubleshoot complex power systems in live environments., • Strong communication and leadership skills in field settings., • Valid driver’s license required. Travel & Working Conditions: • Significant travel within Kinsley’s service territory, • Work performed in hospitals, data centers, industrial facilities, utilities, and construction environments., • Exposure to energized electrical systems, mechanical equipment, and outdoor conditions., • Ability to lift up to 100 lbs and work in physically demanding environments. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

Job DescriptionCivil Engineer – Site DevelopmentOverview We’re seeking a Civil Engineer to support and lead site development projects across New York City and Nassau County. This role focuses on delivering high‑quality civil design solutions for residential, commercial, and municipal projects, with responsibilities spanning design, permitting, coordination, and construction support. You’ll work closely with multidisciplinary teams, interact with municipal agencies, and have the opportunity to mentor junior staff while continuing your path toward Professional Engineer (PE) licensure. This is an excellent opportunity for a motivated engineer looking to grow their technical expertise while working on a diverse mix of urban and suburban developments. Key Responsibilities • Lead and support civil design efforts for site development projects, including site layout, grading, drainage, stormwater management, utilities, and roadway elements, • Prepare engineering design drawings, technical calculations, reports, and permitting packages for agency review and approval, • Support project planning activities such as scheduling, task coordination, and milestone tracking in collaboration with project managers and internal teams, • Coordinate with clients, municipal agencies, and stakeholders; participate in meetings, hearings, and site visits to present designs and address technical comments, • Ensure designs and deliverables comply with applicable local, state, and federal regulations, including NYSDEC and municipal requirements, • Perform QA/QC reviews on plans, calculations, and reports to maintain accuracy, constructability, and consistency, • Provide guidance and oversight to junior engineers, drafters, and field staff to support team development and quality outcomes, • Assist with hydrologic and hydraulic analyses related to drainage and stormwater systems, • Support projects from concept design through permitting and construction support as neededRequired Qualifications, • 2+ years of civil engineering experience focused on site development and land development projects, • Proficiency in AutoCAD and experience using Civil 3D for site layout, grading, and infrastructure design, • Hands-on experience with grading, drainage, stormwater systems, utility routing, and sanitary design, • Experience supporting residential, commercial, and municipal projects, ideally within urban and suburban environments such as NYC and Nassau County, • Working knowledge of hydrologic and hydraulic design principles, • Familiarity with land development permitting processes and agency coordination, including NYSDEC and local municipalities, • Strong technical writing skills, with the ability to prepare reports, calculations, and permit documentation, • Detail-oriented approach with a strong commitment to QA/QC and technical accuracy, • Effective communication skills and the ability to collaborate across multidisciplinary teams, • Actively pursuing Professional Engineer (PE) licensurePreferred Qualifications, • Experience supporting projects from conceptual design through construction administration, • Ability to manage multiple projects and deadlines in a fast‑paced environment, • Comfort working in both office and field settings, including occasional site visits, • Strong problem-solving skills and the ability to develop practical, constructible design solutionsJob Type & Location This is a Permanent position based out of Huntington, NY. Pay and Benefits The pay range for this position is $90000.00 - $110000.00/yr. Competitive compensation package Health, dental, and vision benefits 401(k) with company match Professional development support, including PE licensure assistance Opportunities for career growth within a respected Long Island engineering firm Workplace Type This is a fully onsite position in Huntington,NY. Application Deadline This position is anticipated to close on Jun 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Mechanical Engineer Behlman Electronics, a leading power supply design firm located on Long Island, NY which was founded over sixty-five years ago as an engineering, manufacturing, and consulting firm for power products. Over that time, it has grown to become a leading power solutions provider for applications demanding cutting edge performance for commercial, industrial, and military mission-critical applications, is looking for a motivated technically minded individual for a position on its Engineering Team Job Description: The selected candidate will be expected to execute in a small, yet diverse, team environment through all phases of the product life cycle, this includes concept development, detail design, qualification, manufacturing transition, and production support. The engineer will be responsible for supporting the development of innovative and robust power supply solutions to meet demanding customer requirements and will leverage their mechanical engineering expertise to perform detailed design and analyses. Day to day, activities include working with 3D solid models, drawings, performing analyses to assure fit & function; performing thermal, structural/stress, and vibration analyses; assessing designs against environmental requirements. Desired Skills and Education: • Required Education: Bachelor's Degree in Mechanical Engineering or equivalent degree, • 3-5 years of relevant experience preferred., • Knowledge in fundamentals of mechanical design, analysis, and documentation principles, • Experience in Electronics Packaging and thermal simulation and analytical techniques. (Computational Fluid Dynamics, Finite Element Analysis etc)., • Experience with CAD development tools such as Inventor, Solidworks or Creo., • Strong written and verbal communication skills, • Motivated self-starter and problem solver with ability and desire to work in diverse multi-disciplinary teams Compensation & Benefits: Salary - $90,000 - $100,000 Based on Experience. 401K Health Insurance Vision and Dental Insurance Life Insurance Paid Time off (Vacation, Holidays, sick leave etc.) Flexible Spending Accounts Tuition Assistance End of year time off Opportunities for advancement This is an on-site position and candidates must be a US Citizen or Permanent Resident. Company DescriptionBehlman Electronics Inc., an ISO 9001:2008 company, designs and manufactures a wide array of power productsBehlman Electronics Inc., an ISO 9001:2008 company, designs and manufactures a wide array of power products

Job Description On-Site, Hauppauge, NY Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Job Description We are seeking a highly motivated and technically strong Application Engineer to play a strategic technical role expanding and supporting the adoption of Narda Safety Test Solutions (Narda STS) product lines throughout the United States. Narda STS, based in Germany, is a global leader in RF test & measurement, EMF safety, spectrum monitoring, interference hunting, and EMC/EMI analysis. This position focuses on expanding Narda’s presence across key U.S. markets, including military and defense, government agencies, aerospace, telecommunications, and industrial customers. In this role you will act as the technical authority for Narda products in the U.S., providing end-to-end support, from pre-sales consulting and product demonstrations to application development and post-sales assistance. A critical part of this role includes collaborative technical engagement and brainstorming with customers, including military program offices, system integrators, and field engineers, to help identify mission requirements, design technical use cases, and propose innovative solutions using Narda STS equipment. Key Responsibilities Customer & Applications Engineering • Serve as the primary technical expert for Narda STS equipment including EMF meters, spectrum analyzers, RF interference detectors, RF direction finders, and spectrum monitoring systems., • Conduct product demonstrations for commercial, government, and U.S. military customers (onsite, virtual, and at trade shows)., • Work with customers to design test methods, solve operational challenges, and optimize their use of Narda products., • Engage in brainstorming sessions with defense and enterprise clients to develop application concepts, system configurations, and mission-specific use cases., • Provide Tier 1/Tier 2 technical support and coordinate with engineering teams in Germany for advanced issues., • Create and deliver training, application notes, usage guides, and technical presentations. Sales Engineering & Business Development • Support sales initiatives by identifying customer needs and recommending the proper Narda STS solution set., • Prepare customized proposals, technical quotes, and configuration packages., • Support federal and military acquisition processes including RFP/RFQ responses., • Build strong relationships with key accounts in the defense, aerospace, telecom, and industrial sectors., • Participate in field evaluations, pilot programs, and product qualification activities with military stakeholders. Market & Product Insight • Collect customer feedback to help guide new product features, development, and roadmap discussions with Narda STS headquarters., • Maintain expertise in RF measurement, EMF regulations, spectrum-monitoring practices, and military-relevant standards., • Track market trends and competitive products to support strategic planning. Travel Requirements • Frequent domestic travel for customer visits, demonstrations, training sessions, field support, and events., • Occasional travel to Germany for product training and technical alignment with Narda STS teams. Qualifications Required • Bachelor’s degree in Electrical Engineering, RF Engineering, Physics, Communications Engineering, or equivalent technical experience with RF systems., • 2+ years in RF test & measurement, spectrum analysis, EMC/EMI, or similar technical field., • Strong understanding of RF concepts (modulation, spectrum behavior, antennas, interference, propagation)., • Proven customer-facing experience in pre-sales engineering, applications support, system integration, or field engineering., • Ability to lead technical discussions and explain complex concepts clearly., • Active U.S. Government security clearance preferred; candidates must be eligible to obtain and maintain a government clearance. Preferred • Experience supporting U.S. military customers, defense contractors, or federal agencies., • Experience with Narda STS or comparable RF instrumentation (Keysight, Rohde & Schwarz, Anritsu, Wavecontrol, etc.). Personal Attributes • Strong technical curiosity and problem-solving abilities., • Comfortable brainstorming technical ideas and application scenarios with customers., • Self-starter with excellent organizational and communication skills., • Ability to work independently in a remote environment while coordinating across time zones. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Our client is a Construction Management / Owners Rep firm that's focused on Public Works and Healthcare projects throughout the New York Metro markets.Maintain good relationships with internal and external clients, including representatives of Owner and Architect/Engineer -Develop and maintain site

Job Description Engineer Precision. Build Excellence. Join Interior Specialties Group as a Cabinet Shop Engineer! Job Title: Cabinet Shop Engineer Company Name: Interior Specialties Group (ISG) Salary: $100,000 – $115,000+ per year (depending on experience) Location: Full-Time | On-Site | Ronkonkoma, NY Industry: Architectural Millwork / Interior Glazing / Commercial & Residential Interiors Job Overview Interior Specialties Group (ISG) is seeking a detail-driven Cabinet Shop Engineer to support our custom millwork and cabinet fabrication operations. This role transforms architectural drawings and field conditions into precise shop drawings, cut lists, CNC files, and material documentation used by our wood shop and installation teams. The Cabinet Shop Engineer plays a critical role in connecting project management, engineering, fabrication, and field installation—ensuring projects are delivered with precision, efficiency, and constructability. Who We Are Interior Specialties Group (ISG) is a premier Architectural Millwork and Interior Glazing company serving developers and residential and commercial builders throughout the New York area. We specialize in precision-driven, high-quality interior buildouts that transform spaces and exceed client expectations. Known for our collaborative team culture and commitment to craftsmanship, ISG provides employees with the opportunity to grow their careers while contributing to complex and rewarding projects across the region. Learn more at www.isg.nyc. Key Responsibilities • Engineering & Drafting, • Produce detailed shop drawings for custom cabinetry, architectural millwork, and specialty fabrications using AutoCAD, Microvellum, or similar platforms., • Translate architectural drawings, specifications, and design intent into manufacturing-ready shop drawings., • Create accurate cut lists, hardware schedules, and bills of materials (BOMs) for fabrication and procurement., • Prepare CNC programs for machining equipment to ensure precise fabrication and efficient material utilization., • Project Coordination, • Collaborate with Project Managers to review scope, timelines, and technical requirements before engineering release., • Coordinate with field supervisors to incorporate site measurements and as-built conditions into engineering drawings., • Communicate with shop personnel and operations leadership to resolve technical questions during fabrication., • Participate in project kickoff meetings to confirm milestones, materials, and installation sequencing., • Quality, Standards & Constructability, • Engineer shop drawings that align with ISG construction methodologies, AWI standards, and project specifications., • Identify constructability challenges early and propose practical solutions for shop and field teams., • Maintain accuracy and consistency across plans, elevations, sections, and detail drawings., • Update and revise drawings based on field conditions, change orders, or client updates., • Technical Support & Process Improvement, • Serve as a technical resource for shop personnel during fabrication., • Maintain and improve engineering templates, hardware libraries, and standard shop details., • Assist with optimizing CNC nests, tool paths, and material usage to improve shop efficiency., • Provide engineering insight into tooling, fabrication workflows, and equipment utilization., • Documentation & File Management, • Maintain organized drawing sets, revision histories, and production documentation., • Ensure engineering packages are complete and accessible to project management and fabrication teams., • Provide fabrication-ready documentation including shop drawings, cut lists, CNC files, and hardware schedules. Qualifications • 5+ years of engineering or drafting experience in cabinetmaking, architectural millwork, or commercial woodworking., • Strong proficiency in AutoCAD; experience with Microvellum, Cabinet Vision, or similar software preferred., • Solid knowledge of woodworking construction methods, tolerances, cabinet fabrication, and AWI standards., • Ability to read and interpret architectural drawings, specifications, and finish schedules., • Experience generating CNC programs for woodworking machinery., • Excellent organizational skills and meticulous attention to detail., • Strong problem-solving abilities with the capacity to manage multiple projects simultaneously., • Clear communication skills to collaborate with project managers, shop leads, installers, and vendors. Preferred Skills • Experience in commercial interiors such as healthcare, corporate, hospitality, or institutional millwork projects., • Knowledge of laminate, veneer, solid surface, metal integration, and specialty finishes., • Familiarity with lean manufacturing concepts or production workflow optimization., • Experience supporting both shop fabrication and field installation teams. Benefits • Competitive salary: $100,000 – $115,000+ annually, • Generous Paid Time Off (PTO), • 401(k) retirement plan, • Opportunity to work with a highly experienced and collaborative millwork team, • Professional growth opportunities within a growing specialty construction company, • Ability to contribute to engineering standards and operational improvements Schedule • Full-Time, • Monday – Friday Work Location • On-Site – Ronkonkoma, NY Equal Employment Opportunity We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status.

Salary: $115,000 - 125,000 per year.Bachelors degree in Software Development, Computer Science, or a related field (or equivalent experience).NET Core, Razor templating, and Blazor (Server and/or WebAssembly).Proficiency in C#, HTML/CSS/JavaScript, and.Entity Framework, Azure DevOps).Strong understa

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

Bachelor's Degree in Engineering discipline and minimum 4 years of developing embedded software-based engineering solutions. Job Title: Specialist, Information Security Systems Engineer. The Information Security Systems Engineer will be involved in Information Assurance (IA) related architecture dev

We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. Kesselring Site, and Naval Reactors Facility, and at the U.

If you're ready to apply your meticulous eye for detail, love turning paperwork into precision?engineered shipments, and want to build a career where every document you validate helps protect the planet and the people who defend it, come build your future with BAE Systems.

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

Responsible for driving revenue, EBIT, and operational excellence across key national accounts including Walmart, Amazon, Costco, Target, and Spiral Edge.This role owns both the commercial strategy and the execution layer behind it.It ensures that what is sold is delivered, reconciled, and communica

Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and Legal, while leading external consultants, contractors, and vendors to successful delivery. Cross-collaborate with Legal, Global Procurement, Workplace Strategy & Planning, Engineering, IT/AV, Security, EH&S, Facilities Opera

H2M architects + engineersis seeking a dynamic, hands-on future-focused Innovation Project Manager to drive transformative initiatives that elevate our Learning & Development programs, operational processes, and firmwide innovation culture. Bachelor's degree in Business, Engineering, Architectur

Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and Legal, while leading external consultants, contractors, and vendors to successful delivery. Cross-collaborate with Legal, Global Procurement, Workplace Strategy & Planning, Engineering, IT/AV, Security, EH&S, Facilities Opera

Assistant Project Manager (HVAC).We are seeking a motivated and detail-oriented.This hybrid role combines project coordination with job costing responsibilities, making it ideal for someone who understands both field operations and construction accounting.You’ll support multiple HVAC or constructi

Partner with Product Development, Packaging Engineering, Regulatory, Quality, Supply Chain, and Operations teams.

Saratoga County, NY - on site role.

Fort Point is seeking a highly organized and detail-oriented professional to support the lifecycle management (booking, onboarding, settlement, documentation, client support, etc.OTC hedging and monetization transactions.This role serves as a critical control function between clients, our trading te

The Project Safety Manager promotes job-site safety through the implementation and administration of safety policies, analysis of safety data, and completion of jobsite safety audits. Ability to generate reports and job site summaries. The Project Safety Manage ensures safety compliance of the proje

Direct and coordinate subcontractors, vendors, and onsite crews to ensure quality standards and deadlines are met. Perform routine site inspections to monitor workmanship, safety requirements, and schedule progress. Lead and support Site Supervisors and field personnel through clear direction and ac

The work schedule will be onsite at the firms Nassau or Suffolk County client sites as well as in their offices. Coordinate with architects, engineers, contractors, and clients to streamline communication and resolve design and construction issues.

The Project Engineer will collaborate with functional leads and project managers, engaging in both office and fieldwork to identify critical and near-critical paths. Bachelor's Degree in Engineering or Construction Management. Prolonged standing and walking long distances around construction sites w

Onsite 4x/week in Westchester County, NY (when not traveling). Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and Legal, while leading external consultants, contractors, and vendors to successful delivery. Cross-collaborate with Legal, Global Procurement, Workplace Strategy &

For the client we support these projects could be T&D, hydro-electric, substation, and more, as well as new sites and upgrade and retrofitting of existing sites. Idom is an employee-owned international engineering, architectural and consulting firm. In the US we emphasize providing professional engi

Lead problem-solving and value-engineering discussions. Bachelor's degree in Construction Management, Engineering, or related field.

Experience as a Quality Engineer, Manufacturing Engineer, or similar role. Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or related field. Well-established manufacturing company is seeking a Quality Engineer to support ongoing production and continuous improvement initiative

Coordinate with architects, engineers, subcontractors, and vendors.

Location: Brentwood, NY (On-site). Interpret engineering drawings, GD&T, and customer specifications. Review STEP files, drawings, and engineering documentation.

This is a full-time, on-site Quality Engineer role based in the Rochester, New York Metropolitan Area. The role collaborates closely with production, engineering, and supply chain teams to resolve quality issues, optimize processes, and support continuous improvement initiatives. The Quality Enginee

Bachelor's degree in Engineering, Quality, or a related field preferred. FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsi

This is a full-time, on-site position.

Bachelor’s degree in Electrical Engineering, Manufacturing Engineering, Quality Engineering, Industrial Engineering, or related technical field preferred. This individual will work closely with Manufacturing, Engineering, Supply Chain, and Production teams to ensure products meet customer, regulat