Trabajos site engineer en Syracuse, New YorkCrear alertas

We are seeking a Level 4 Senior Staff RF Antenna Engineer with deep expertise in antenna systems, element/mutual coupling, and free-space radiation performance—and the proven ability to rapidly evaluate, troubleshoot, and optimize existing antenna designs. This is a high-impact, fast-response role supporting programs where performance shortfalls must be diagnosed and corrected on aggressive timelines. You will bridge simulation, measurement, and practical implementation to deliver solutions that work—quickly and reliably. Key Responsibilities: * Rapidly assess existing antenna and array designs for performance gaps against requirements. * Diagnose and resolve issues related to mutual coupling, beam distortion, impedance mismatch, and bandwidth limitations. * Recommend and implement design modifications for immediate performance improvements. * Perform accelerated free-space radiation pattern measurements and compare results against simulations. * Run high-fidelity EM simulations (HFSS, CST, FEKO, or similar) under compressed schedules for fast validation. * Evaluate antenna integration into host platforms for mechanical, thermal, and electrical compatibility. * Support urgent production and field troubleshooting, including on-site technical interventions when required. * Collaborate with RF systems engineers to ensure antenna performance aligns with system-level budgets and phase stability. * Produce clear, actionable evaluation reports for program stakeholders, often under short deadlines. * Mentor junior engineers in rapid diagnostic and problem-solving methods. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). * 10+ years of antenna design and/or evaluation experience in radar, communications, or EW systems. * Expert understanding of antenna theory, EM propagation, polarization, and impedance matching. * Proven ability to mitigate mutual coupling in dense or phased-array configurations. * Experience delivering high-quality antenna evaluations and solutions under aggressive timelines. * Proficiency with EM simulation tools such as HFSS, CST, FEKO, GRASP. * Hands-on experience with antenna measurement in both anechoic chambers and open-air ranges. * US Citizenship with ability to obtain and maintain a security clearance. Preferred Skills: * Experience with low-observable and conformal antenna designs. * Familiarity with wideband, multiband, and frequency-agile antenna systems. * Exceptional problem-solving and communication skills for high-pressure, time-sensitive projects. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Bridge Project Engineer Location: [Various locations in PA, NY, TX, NC] Type: Full-time | Transportation Infrastructure Position Summary: Are you ready to lead impactful bridge and structural projects? This role offers the opportunity to design, analyze, and manage the construction and maintenance of critical infrastructure—such as bridges, buildings, and dams—that supports community growth and connectivity. The ideal candidate will bring technical excellence, innovation, and leadership to every phase of project execution. Key Responsibilities: Lead bridge design efforts, including load rating, structural analysis, and foundation design Prepare comprehensive design plans, technical specifications, reports, and cost estimates Provide technical guidance during construction, including responding to contractor questions and performing site visits to ensure adherence to design intent Conduct bridge and culvert inspections and produce related field reports Ensure all designs comply with applicable safety standards, codes, and regulations Maintain organized records of project design documents, schedules, and budget information Coordinate effectively with clients, consultants, and permitting/regulatory agencies Review internal design work for technical accuracy and ensure quality control Participate in regular project meetings and collaborate with internal teams to meet project deadlines and budget goals Mentor and provide technical direction to junior engineering staff Assist Project Manager with presentations, scheduling, and execution of project development tasks Qualifications: Bachelor’s degree in Civil Engineering (Master’s degree preferred) Professional Engineer (PE) license or the ability to obtain one 10–15 years of transportation infrastructure experience with an emphasis on structural/bridge design Proficiency with MicroStation, STAAD, and bridge design software preferred Familiarity with NYSDOT and/or PennDOT standards and procedures required Skills & Attributes: Commitment to delivering high-quality, technically sound engineering solutions Excellent collaboration, communication, and interpersonal skills Strong sense of responsibility, initiative, and ownership of assigned work Ability to think critically and solve complex engineering problems Attention to detail while balancing multiple priorities in a dynamic environment Receptiveness to feedback and continuous improvement Proficiency in Microsoft Office Suite (Word, Excel, Outlook) Compensation: Salary Range: $100,000 – $130,000 annually Actual compensation may vary based on experience, education, and other relevant factors. This range does not include the value of benefits. This is your opportunity to contribute to projects that make a lasting difference in communities. If you're passionate about infrastructure and thrive on technical challenges, this role offers a meaningful path forward. #M1 Ref: #282-Eng Pgh

Join Our Team as a Quality Engineer at Superior Metals Manufacturing! About the Role: Superior Metals Manufacturing is seeking a highly motivated and detail-oriented Quality Engineer to join our team in Chittenango, NY. This role is integral to our commitment to manufacturing excellence and customer satisfaction. The Quality Engineer will work closely with internal departments, suppliers, and customer representatives to ensure compliance with quality standards and regulatory requirements. In this role, you will champion our Business Management System (BMS) and Advanced Quality System (AQS), driving continuous improvement initiatives and fostering a culture of quality throughout the organization. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $80,000 - $100,000, but will be evaluated depending on candidates’ knowledge, skills, and abilities. Key Responsibilities: • Serve as the primary quality assurance contact for assigned customers, ensuring proactive communication and resolution of quality-related issues., • Lead and coordinate technical quality efforts across engineering, manufacturing, and purchasing teams to meet and exceed customer expectations., • Conduct and support customer product, system, and qualification audits, ensuring accurate and timely documentation., • Assist in the review and disposition of customer contracts, specifications, purchase orders, and technical documentation., • Develop, implement, and monitor Corrective and Preventative Action (CAPA) plans to address nonconformances and prevent recurrence., • Actively participate in risk assessments, process improvement initiatives, and root cause analysis activities., • Promote and support continuous improvement through lean methodologies, quality training, and cross-functional collaboration., • Maintain up-to-date knowledge of industry standards and technological advancements in quality systems and analytical tools., • Support internal and external audit activities, including AS9100, NADCAP, ISO17025, and A2LA audits., • Contribute to internal quality metrics and reporting to track progress against goals., • Support the development and implementation of operational training structures; ensure all employees complete required training and remain compliant with quality standards and procedures., • Provide input for quote reviews, inspection planning, and development of shop floor instructions., • Bachelor’s degree in Engineering, Quality, or a related technical discipline, OR an equivalent combination of education and experience., • Minimum 2 years of experience in a quality engineering or quality systems role within a manufacturing environment., • In-depth knowledge of quality standards and frameworks, including AS9100, NADCAP, ISO17025, and A2LA., • Proficiency in quality tools and methodologies such as root cause analysis, FMEA, 5 Whys, Pareto analysis, and control plans., • Strong analytical and problem-solving skills, with the ability to interpret complex technical documents and specifications., • Excellent communication skills, with the ability to collaborate effectively across departments and with external stakeholders., • Demonstrated ability to manage multiple priorities in a fast-paced, deadline-driven environment., • Proficiency in Microsoft Office Suite and familiarity with ERP and quality management systems., • 3–5 years of experience in the aerospace, investment casting, or metal manufacturing industry., • Working knowledge of Six Sigma, Lean Manufacturing, or Theory of Constraints (TOC) principles., • Experience with contract review, inspection planning, and regulatory compliance in a customer-facing role., • ASQ certification (CQE, CQA, or similar) is a strong plus., • Key Relationships, • Collaborate with the Quality Manager, Lab Manager, Sales Manager, Process Engineers, and Manufacturing Leaders At Superior Metals Manufacturing, we take pride in more than just what we make—we take pride in how we make it. By joining our team, you'll be part of a dynamic and growing company where innovation, craftsmanship, and quality are at the heart of our culture. We foster an environment of collaboration and continuous learning, where every team member’s voice matters and contributions are valued. Whether you're developing cutting-edge aerospace components or streamlining a process on the production floor, you’ll be making an impact every day. We offer: Innovative Environment: Work in a state-of-the-art melt shop. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Ready to shape the future of manufacturing quality? Apply today and bring your precision and passion to a team where your impact matters. About Us: Superior Metals Manufacturing (SMM) is a Consolidated Precision Products (CPP) company. SMM at CPP is a part of an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Job DescriptionDescription: Transportation Highway Group Manager – Civil Engineering Syracuse, NY/ Hybrid Lead with Purpose. Design What Moves Communities. Fisher Associates is hiring a Transportation Highway Group Manager, an experienced Civil Engineer to lead the technical design of impactful highway and roadway projects across Upstate New York. If you're driven by engineering excellence, mentorship, and meaningful work, this is your opportunity to grow and make a difference. In this senior technical role, you’ll guide design development, ensure high-quality deliverables for clients like NYSDOT and local municipalities, and mentor junior engineers within a collaborative team environment. At Fisher Associates, we value innovation, integrity, and leadership. Join a firm where your skills are recognized and your career can thrive. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Deliver transportation projects that improve mobility, safety, and quality of life in local communities., • Foster a high-performing, motivated team through clear expectations, constructive feedback, mentoring, and career development., • Oversee the design and execution of highway engineering projects, ensuring compliance with industry standards, regulations, and client requirements., • Serve as a technical lead, guiding the team on best practices, decisions, and troubleshooting as needed., • Implement and oversee quality control processes and conduct technical audits to ensure high standards., • Maintain effective communication with project managers, clients, and cross-functional teams., • Ensure effective resource allocation, adequate staffing, and utilization to meet project and team goals., • Assist in recruiting top engineering talent who align with the team’s technical excellence and company culture., • Lead continuous improvement initiatives to enhance team performance., • Stay current with transportation design trends and emerging technologies, integrating them into project solutions. Your Impact Matters, Your Career Thrives. Work on engaging transportation projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Transportation Group Highway Manager • B.S. degree in Civil Engineering, • 8-15 years’ experience in civil transportation engineering, • Professional Engineering License (PE) preferred or ability to obtain it, • Prior staff management preferred, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure designs adhere to state and local standards, regulations and safety codes., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design, • Provide technical support during construction, respond to RFIs and attend site visits., • Provide technical support during construction, respond to RFIs and attend site visits., • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Project Engineer • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job DescriptionDescription: A Bridge Engineer– Civil/Structural Full-Time | Hybrid Syracuse, NY Launch Your Career & Structural Engineering | Design the Bridges of Tomorrow Are you a civil or structural engineering graduate or early-career bridge engineer looking to gain hands-on experience in infrastructure design? Fisher Associates is seeking a Bridge Engineer I or II (Civil/Structural) with 0–5 years of experience to join our collaborative Bridge and Transportation team. In this hybrid role you’ll work on impactful bridge design and transportation infrastructure projects that improve safety and mobility in the communities we serve. This is an exciting opportunity to launch your engineering career with mentorship, professional development, and a clear path to PE licensure. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Assist with field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0-5 years of transportation experience, structures/bridge design engineering experience preferred, • EIT preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT) preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to take ownership of projects, prioritize effectively, and thrive in a dynamic, fast-paced environment., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain accurate records of project details, including design documents, progress reports, and budget information., • Participate in project planning meetings, coordinating tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure compliance with safety codes, design standards, and regulatory requirements., • Conduct field inspections and prepare detailed bridge and culvert inspection reports., • Provide technical support during construction: respond to RFIs, conduct site visits, and ensure design integrity., • Collaborate with internal teams, subconsultants, regulatory agencies, and clients to ensure seamless project delivery. Your Impact Matters, Your Career Thrives. Work on engaging bridge engineering design projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Health insurance-Medical, Dental & Vision, • 401(k) plan, • Company-paid life and disability insurance, • Hybrid work schedule, • Generous PTO, • Strong work-life balance, • Shareholders program, • A comprehensive range of benefit options to support your well-being, financial security, and peace of mind. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) or ability to obtain it., • Experience with MicroStation, STAAD, Bridge Design Software programs preferred., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job DescriptionDescription: Shape the future of infrastructure through innovative highway and bridge engineering Are you an experienced Transportation Project Manager ready to lead high-impact civil engineering and transportation infrastructure projects? Fisher Associates seeks a motivated professional to manage and deliver innovative highway and bridge design solutions. Whether you’re a licensed Professional Engineer (PE) or an EIT nearing licensure, this is your opportunity to advance your leadership career and drive critical infrastructure projects that improve mobility and safety. At Fisher Associates, we support your growth, leadership, and innovation—your success is our priority. Ready to advance your career and shape the future of infrastructure? Apply now to join Fisher Associates! About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Proactively pursue new business with existing and prospective clients by delivering exceptional service, promoting Fisher’s capabilities, and building lasting relationships., • Successfully lead mid-to-large-scale transportation projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy and collaborate with teams, clients, partners, and stakeholders to align with client goals and ensure seamless project delivery., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Provide clear direction, motivation, and mentorship to team members., • Prepare winning project proposals and serve as primary client contact throughout the process., • Successfully navigate and implement complex public processes and municipal approvals., • Represent Fisher Associate’s in professional organizations, business boards, and community activities. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Senior Transportation Project Manager • B.S. degree in Civil Engineering (Master’s preferred), • 10+ years in civil transportation engineering, including project management of DOT-funded highway and bridge projects, • Professional Engineering License (PE) preferred or ability to obtain it, • Proven client relationship and business development skills in transportation sector, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYDOT or PennDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Foster trust and collaboration through integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary CME is seeking a skilled and detail-oriented Utility Locate and Ground Penetrating Radar (GPR) Technician to join our team. The successful candidate will be responsible for utilizing advanced technology to identify and map underground utilities, ensuring accurate and safe excavation practices. This role requires a strong understanding of utility systems, excellent technical skills, and the ability to work independently and as part of a team, under the supervision of a Licensed Engineer. Responsibilities • Utility Location: Use electromagnetic locating equipment to identify and mark underground utilities including water, sewer, gas, electric, and communication lines., • Ground Penetrating Radar: Operate GPR systems to detect and map subsurface structures, objects, and anomalies. Analyze GPR data to provide accurate reports and interpretations., • Data Interpretation: Review and interpret data from utility locate and GPR systems, creating detailed maps and reports for use in planning and excavation., • Field Surveys: Conduct field surveys and inspections to verify utility locations and assess site conditions., • Documentation: Maintain accurate and detailed records of utility locations, GPR data, and field observations., • Safety Compliance: Adhere to safety protocols and standards to ensure safe working conditions on job sites. Report any potential hazards or safety concerns., • Customer Interaction: Communicate effectively with clients, providing clear explanations of findings and recommendations., • Equipment Maintenance: Perform routine maintenance and calibration of utility locating and GPR equipment to ensure optimal performance., • Education: High school diploma or equivalent, along with technical certification in utility locating and GPR technology. Bachelor’s or associate degree in geology, civil engineering, or a related field is preferred., • Experience: Minimum of 2 years of experience in utility locating, ground penetrating radar, or a related field. Experience in construction or civil engineering is a plus., • Technical Skills: Proficiency in operating utility locating equipment and GPR systems. Ability to analyze and interpret data from these technologies., • Knowledge: Strong understanding of underground utility systems, mapping techniques, and safety regulations., • Physical Requirements: Ability to work in various environmental conditions, including outdoor sites and confined spaces. Must be able to lift and carry equipment as needed., • Communication Skills: Excellent verbal and written communication skills. Ability to convey technical information to non-technical stakeholders., • Attention to Detail: Strong analytical skills and attention to detail in data collection and reporting. Working Conditions • This position involves working outdoors in varying weather conditions and potentially hazardous environments., • May require occasional travel to different job sites. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR 4Rog9eK1LT

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • An Office Engineer assists the EIC/Resident Engineer on daily management of construction inspection projects, providing technical and administrative information to others working on the project to ensure that work complies with all engineering standards, codes, and specifications. Responsibilities include, review of daily inspection reports and payment quantities in accordance with NYSDOT/MURK requirements, prepare change orders for overruns, changed conditions, and additional work as well as other project administration roles., • The Office Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 10 years of related experience, or similar position with experience in the construction field and transportation projects., • NICET III or equivalent experience, or EIT designation, • Bachelor's Degree desired. Associate's Degree acceptable with relevant experience, • Excellent communication skills, • Ability to supervise or coordinate the work of others, • Knowledge of NYSDOT's Equitable Business Opportunities (EBO) software Estimated Compensation Range: $83,200 - 101,920/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

As a Senior SRE, you will help own and improve the technical foundations of Perchwell while exemplifying engineering rigor and excellence across our engineering culture and strategy. You are rigorous and meticulous in your work and hold others to the same high engineering standards. You will work cl

The ideal candidate is going to be a hands on engineer, and very strong with AWS Products to help build out data pipelines, create jobs, manage the quality of the data warehouse and integrated tools. Leverage AWS services like Glue, Lambda, S3, Athena, and EMR to build modular, reusable data sol

Job DescriptionDescription: Precast Design Engineer - Civil/Structural Join Our Team as a Precast Design Engineer – Innovate and Lead in Concrete Design Are you ready to take your engineering career to new heights? Fisher Associates is seeking a skilled Precast Design Engineer to join our dynamic team, where your expertise in designing precast concrete components will make an impact on diverse civil and structural projects. Join Fisher Associates and bring your talents to a team that values innovation, collaboration, and your unique contributions. Apply now to advance your career and play a key role in impactful projects within a supportive and dynamic environment! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Precast Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5 -10 years minimum transportation experience including Precast concrete design engineering, • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO and IBC codes, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description Full-time | Professional Locations: Clifton Park, Cohoes, East Syracuse, Monroe, New Windsor, Poughkeepsie, Staten Island, Syracuse, Wappingers Falls, NY About Rezolut Rezolut is a national emerging platform of diagnostic medical imaging services, focused on delivering high-quality patient care with innovative technology. We provide fixed-site and mobile outpatient imaging services, positioning ourselves as leaders in radiology across all modalities.Position Overview Rezolut is seeking a Siemens-Certified Field Service Engineer to service, maintain, and repair Siemens Mammography, MR, and Ultrasound systems across our network in the Northeast. While Siemens certification is required, experience servicing other diagnostic imaging modalities—such as GE and Hologic—is highly valued. This position requires travel and offers training, career growth, competitive pay, PTO, and benefits.Primary Responsibilities • Troubleshoot, install, maintain, and repair Siemens Mammography, MRI, and Ultrasound systems., • Service additional diagnostic imaging equipment from GE, Hologic, or other OEMs, as needed., • Complete preventive maintenance, modifications, setup, calibration, QC, and QA per OEM specifications., • Maintain service records, daily customer communications, and follow-up to ensure resolution., • Maintain tools, test equipment, and ensure proper calibration., • Work collaboratively with internal teams while also operating independently in the field., • Lift, carry, and transport tools and equipment as required., • Adhere to HIPAA, OSHA, FDA, and other regulatory requirements., • Establish and maintain professional relationships with customers and peers.Required Education & Experience, • Siemens certification for diagnostic imaging systems is required., • Associate's degree or equivalent technical training; OEM Radiology, Electrical, or Technology experience preferred., • Minimum 2+ years of experience servicing diagnostic imaging equipment, including Siemens systems., • Experience with mechanical, electromechanical, and electronic diagnostic imaging systems., • Proficiency with MS Word, PowerPoint, Excel, and Outlook., • Excellent analytical, communication, and problem-solving skills., • Ability to work independently in a fast-paced environment with changing priorities., • Valid driver’s license and clean driving record., • Must be able to travel regularly.Preferred Experience, • Hands-on experience with other OEM imaging systems: GE, Hologic, etc., • Customer-focused service experience in medical imaging environments.Benefits, • PTO accrual from day one (Full-Time), • 6 Observed Holidays, • Medical, Dental, Vision, Life, and voluntary insurance options, • 401(k) Retirement Plan, • Employee Assistance ProgramJob Type: Full-time

Job Description Who is Rezolut? Rezolut is a national emerging platform of diagnostic medical imaging services. With a focus on four key platforms, our vision is to provide top-notch patient care partnered with innovative technology — to achieve better health outcomes. We provide high-quality, cost-effective, fixed-site outpatient diagnostic imaging as well as mobile imaging and health services. In each of our regions, we are the best in radiology, offering all radiology services! Rezolut is seeking Medical Imaging Service Engineer to provide service and repair to Mammography, Ultrasound, MRI, CT, and X-ray systems nationwide. We are an industry leader with training and career growth opportunities. We offer an excellent pay rate, paid time off, and benefits package options. The Field Service Engineer will be responsible for meeting the daily service maintenance and repair needs of the company’s equipment as well as our customers’ equipment. This position requires regular travel. Below are the equipment manufacturers and modalities that would primarily be serviced: • Siemens – Mammography, MR, and US, • GE Mammography and US, • Philips CT, MR, and US, • Basic troubleshooting, installation, maintenance and repair of radiological equipment., • Completing Preventative Maintenance and modifications., • Setup, calibration, QC and QA of customer’s equipment according to OEM specifications., • Keeping up to date on administrative responsibilities such as maintaining service records in a timely manner., • Maintaining daily communications with customers to ensure resolution and proper follow-up., • Maintaining tools and test equipment and ensuring they are properly calibrated., • Working as a member of Assured Imaging’s team as well as being able to work independently, to provide efficient service., • The ability to lift, carry, and move tools and necessary equipment., • Adhering to current regulatory requirements to include, but not limited to, HIPPA, OSHA and FDA., • Associate's degree or Radiology OEM training, Electrical, Technology, equivalent military experience or Associates Degree with 2 or more years’ experience in servicing Diagnostic Imaging equipment., • Must have experience servicing diagnostic imaging equipment., • Experience interfacing with both internal team members and external customers as part of a solution-based service process., • Valid driver’s license and good driving record is required., • Experience diagnosing and repairing mechanical, electromechanical, and/or electronic equipment., • Proficient level of computer skills including MS Word, PowerPoint, Excel and Outlook., • Excellent analytical, interpersonal and communication skills with the ability to communicate complex technical issues in an easy to understand manner., • Ability to work in a fast-paced, self-directed, entrepreneurial environment., • Resourceful, with the ability to work independently., • Strong time management skills., • Ability to adapt to changing circumstances., • Decision-making, problem-resolution and creative thinking skills, • Attention to detail., • Ability to multi-task activities with shifting priorities. Able to work productively in a pressurized environment. Pay: $80,000.00 - $100,000.00 per year Benefits: • Immediately accrue PTO as you work! (Full Time), • 6 Observed Holidays, • Medical, Dental, Vision, Life and other voluntary insurances for full-time employees, • 401(k) Retirement plan, • Employee Assistance Program

Job Description Industrial Sales Engineer - Syracuse, NY Some application engineers were born to get out. Get out of the support role and move up into sales, meeting on-site and face to face with other industry professionals. You will tackle different industrial and commercial thermal energy needs and working with many different personalities while you solve interesting technical challenges. Is this you? Maybe you've been in HVAC or marine engineering and you've nailed the fundamentals of thermodynamics. After five or so years of doing the same thing, you're eager for higher pay and new challenges, while leveraging the technical know-how you have. At Blake Thermal Sales & Service, Inc., we're looking for people like you who want to move into industrial sales. Our industrial salespeople tell us they love selling best-in-class products like Cleaver Brooks, Camus and more. They get top drawer learning opportunities and use powerful factory support tools like product configurators and offer the engineering community AutoCad models in 2 &3D, and lots of technical support. Our sales team loves working with highly experienced engineering professionals inside and outside of our company. Some of the projects you'll get to work on are massive, and others are national in scope. You can become an expert sales engineer specialized in steam systems over your first few years. We partner with top tier Mechanical Contractors and Engineers. Some of our end user customers are Texas Instruments, On Semi-Conductor, Maine Medical Center and Numerous other hospitals and industrial facilities! Blake Thermal Sales & Service Inc. Blake Thermal Sales & Service Inc. is a full-service thermal solutions company that supplies engineered products, services, and complete systems. Blake Thermal has a 98-year history of providing an array of products and services supporting steam, hot water for process and domestic heat for commercial, industrial, medical, educational and manufacturing facilities. Headquartered in East Windsor, CT, Blake Thermal maintains multiple locations across New York and New England. • Sole focus on integrating and supplying engineered products, services, and complete thermal systems, • Longstanding relationship as a manufacturer's representative with a 98-year history Blake Thermal is looking for an energetic, driven team player to join our New York team in an Industrial Sales role. This key role focuses on providing solutions and services around applications including low-pressure steam, hydroponic heating, domestic hot water, water filtration, and water and wastewater applications. This role focuses on building and maintaining relationships and partnerships with engineering firms, contractors, and end users in the industrial, institutional and commercial marketplace. Ideal Candidates will be in alignment with Blake Thermal's Core Values: • Customer Focused, • Opportunity is Earned, • Solutions Provider, • Trustworthy, • Driven to Succeed, • Develop and maintain excellent relationships with key decision makers, influencers, manufacturers, and Blake Thermal team., • Assist customer with equipment selection, sizing, and estimating based on needs and using a consultative approach to provide customers with the best solutions., • Prepare and present quotations for customers with support from our inside team., • Effectively drive sales; meeting or exceeding sales targets for assigned territory., • Ensure expert delivery of customer value for sustained growth., • CRM tool with contacts, pipeline, opportunities and forecasts., • Participate in local trade associations, trade shows, and technical seminars., • Conduct field events to promote products and solutions., • Support corporate goals and growth initiatives., • BS in Mechanical Engineering, Marine Engineering, or equivalent experience., • Strong customer service and sales knowledge and experience., • Excellent communication, follow up, organizational and record keeping skills., • Commitment to be part of a winning team. Blake Thermal Sales & Service Inc. is an equal opportunity and affirmative action employer. We do not discriminate by race, color, gender, sexual orientation/ gender identity, religion, ethnic or national origin, sex, age, disability status, or status as a covered veteran. Blake Thermal Sales & Service Inc. is a proud drug-free workplace.

Job Description Our Client is seeking a Project Engineer - Water/Wastewater to join their growing team in Syracuse, NY! Water and wastewater management presents unique challenges from environmental, health, and economic issues, to regulatory concerns. Our water management experts comprehend these complexities and apply their expertise in all areas of feasibility, design, and master planning, taking into consideration the value of water as a precious natural resource. Our qualified professionals develop creative and effective solutions for any water management project and are dedicated to ensuring that communities receive safe, consistent water and wastewater distribution, collection, and treatment. Responsibilities • Independently apply extensive and diversified knowledge of principles and practices in broad areas of assignments., • Prepare advanced engineering designs and/or technical data for completion and accuracy., • Utilize advanced techniques, theories and practices to complete assignments., • Design and review complete project documents for conformity and quality assurance., • Develop and apply new and/or improved techniques, processes, etc., for designing engineering plans., • Analyze and interpret data, formulate and solve problems., • Prepare or review scopes of work and budgets, and schedule assignments., • Prepare proposals to provide professional services., • Provide direction to engineers, technicians and administrative staff., • Plan and coordinate detailed aspects of engineering work., • Represent the organization in a variety of ways as an expert on engineering assignments., • Work within AutoCAD Civil 3D and alongside the design team managers to successfully complete projects within established budgets and deadlines., • Perform field investigations/ site visits as needed., • Prepare comprehensive draft proposals and change orders for review., • Prepare conceptual layouts in consultation with PM or client., • Review hydraulic calculations., • Review utility layouts., • Conduct team and select client meetings., • Provide technical guidance to Engineers and Senior Engineers., • Prepare and review pump station designs., • Review and respond-to contractor shop drawing submittals, RFIs, and change order requests, with assistance from PM., • Process contractor requests for payment, with assistance from PM. Qualifications • Bachelor of Science degree in environmental engineering or civil engineering., • FE preferred., • PE preferred., • 4-6+ years of experience in the civil/environmental engineering field with a concentration in water/wastewater design., • Experience, including linear (pipeline) work required., • Some experience with pump station design, water & wastewater treatment systems design preferred., • Experience with AutoCAD & OpenRoads is desired., • Excellent communication skills., • Design experience with water and wastewater treatment plant processes and design., • Ability to read, write,and understand English for purposes of comprehending written job-related communications and verbal instructions and interactions.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The primary role of the Associate Manufacturing Engineer is to provide advanced documentation, equipment, investigative, and process support to the manufacturing organization. The Associate Manufacturing Engineer will be the Technical Manufacturing representative on various projects and cross functional teams, will provide training, participate and/or lead in the implementation of new equipment and processes, author Change Controld, BOM, and SOP/MBR changes. Duties & Responsibilities • Authoring of equipment and facility change controls, MBR revisions, and CAPA Action Plans., • Process and equipment support and troubleshooting., • Author, revise and approve critical Manufacturing documentation, i.e. MBRs, BOM, and SOPs., • Project validation support and execution., • Seek out process inefficiencies and implement solutions., • Development and execution of training materials for new processes and equipment in conjunction with the site technical training team., • Support of MFG shift operations, Tech Transfers, Process Improvements, and other teams as required., • Lead manufacturing process improvement projects and interact with cross-functional groups to achieve departmental and organizational goals., • Knowledge of science generally attained through studies resulting in a B.S. in science, engineering, biochemistry or related discipline, or its equivalent is highly desired., • Direct biologic manufacturing experience of 3+ years., • Extensive knowledge of SOPs and GMPs and the know-how to work within a regulated environment., • Strong knowledge of biopharmaceutical manufacturing processes., • Adaptable to a fast paced, complex and ever-changing business environment., • Effective verbal and written communication skills with technical writing skills., • The position requires a strong understanding of cGMP and regulatory agency requirements and strong technical operational knowledge of the upstream and/or downstream operational unit., • Incumbents must have demonstrated experience in solving complex technical issues in Biologics manufacturing, and have the skills and understanding to troubleshoot process equipment and the overall manufacturing process., • The role requires demonstration of successful participation on diverse work teams where combined contribution, collaboration and results were expected., • The position requires excellent written and verbal skills and the ability to provide direction and communicate expectations to the operating staff., • The candidate will have strong computer skills and be proficient in the following programs: Word, Excel, Visio, and Project., • Position requires repetitive use of hands and wrist (computer work), and infrequent lifting of items not to exceed 50 lbs., • Position is primarily office based with occasional work in a classified GMP manufacturing environment. <5% travel will be required for this position. Target Bonus 8% Work Location: East Syracuse, NY New York Pay Range$60,000—$88,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description We are currently hiring an entry level Environmental Scientist/Geologist/Engineer in our Environmental division at our Syracuse office. The Environmental Scientist/Geologist/Engineer will support Phase I and II Environmental Site Assessments, environmental investigation and remediation projects at sites with contamination by materials such as solvents, petroleum fuels, metals, and PCBs. You have the opportunity to join a dynamic team working on large, technically engaging, and impactful projects. A successful candidate will be able to perform various tasks including field work, soil and groundwater sampling, drilling supervision, reporting, writing, and support project managers on various projects. Duties • Soil and groundwater sampling, • Field Activity Supervision, • Drilling Supervision, • Report Preparation Salary Range: $24 - $26 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 0-5 Years of experience required /preferred, • BS in Environmental Science, Engineering. or Geology preferred, • MS Office Suite, • Strong communication skills, • 40 Hour OSHA Hazwoper Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. o Flexible Work Schedule o Health/Dental Insurance o 401k Plan with Employer Match o Short & Long Term Disability o Profit Sharing o Paid Time Off o Leadership Development Program o Fitness Reimbursement o Tuition Reimbursement o Referral Bonus Program o Wellness Program o Team Building Events o Community Service Events

Job Description LaBella is currently looking to hire an Environmental Engineer with air permitting experience in our growing, multi-disciplinary, Environmental Division. LaBella has over 1,800 employees in over 30 offices throughout 13 states. This is an opportunity for a smart and talented professional with enormous upside potential as part of a growing company. We are seeking a highly motivated individual with an entrepreneurial spirit to join a dynamic team working on exciting, multi-phase, technically engaging, and impactful projects. The successful candidate will be responsible for managing air permitting and air compliance projects for industrial, municipal and state agencies. The successful candidate will have a working knowledge of NYSDEC air regulations, air dispersion modeling and emission calculations (potential-to-emit and actual). The successful candidate will assist project managers with developing proposals with scope of work and cost for client review and conduct necessary site visits/field inspections for new air permits/registrations and assessing compliance with existing permits. LaBella offers excellent training and career advancement opportunities and outstanding benefits. Duties • Experience with Title V air permits, state facility permits and air registrations, • Familiarity with NYSDEC air regs and Fed NSPS and NESHAP, • Knowledge of regulations concerning criteria, non-criteria, HTAC, HAPs and their respective state/fed thresholds, • Familiarity with NYCRR Parts 621 & 617, • Familiarity with NYCRR Part 212 analysis (including DAR-1/SGC & AGC & DAR-10/modeling guidelines), • Familiarity with surface coating (e.g., paint booths and NYCRR Part 228), • Some familiarity with air dispersion modeling (e.g., AERSCREEN, AERMOD), • Familiarity with PTE and actual emissions calc (using AP-42 EFs, Engineering calculations, mass balances, etc.), • Methos 9 certified (for plume/opacity observation), a plus!, • Familiarity with EPA Reference Methods for air pollutant measurements (40CFR60 Appendix A) & NIOSH Methods for indoors and personnel testing/measurements, • B.S. degree in Engineering (Chemical or Environmental), • NY State Licensed Professional Engineer, • 7-15 years of experience in a related local environmental position, • Ability to work independently and as part of a team, • Ability to work in a fast-paced environmental consulting team environment., • Ability to work within a multi-disciplined group of professionals., • Strong communication skills (active listening, written, and verbal), • Organized with strong attention to detail, • Highly motivated, with excellent client service skills and a positive attitude, • Strong problem-solving skills, • Valid NYS driver’s license, lean driving record, and reliable transportation Salary Range: $75,000 - $100,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Highway Design Engineer – Civil/Structural | Shape the Future of Transportation Ready to build the highways of tomorrow? Are you a skilled Highway Design Engineer with a passion for designing safe, efficient, and innovative transportation systems? Join our dynamic team of civil and structural engineering professionals where your expertise in roadway design, highway infrastructure, and transportation engineering will directly impact the communities we serve. In this role, you’ll play a key part in designing highways, roadways, intersections, and other critical transportation infrastructure projects. You’ll collaborate with multidisciplinary teams to solve complex engineering challenges and ensure all designs meet industry standards, environmental requirements, and safety regulations. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrated ability to efficiently manage highway design projects, including drainage, alignments, and related tasks., • Prepare and maintain comprehensive design plans, detailed specifications, technical reports, and accurate cost estimates., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Proactively support project managers with schedules, documentation, and presentations. Your Impact Matters, Your Career Thrives. Work on engaging Highway Design Engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Highway Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience Highway Design Engineering experience preferred, • EIT required, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD, OpenRoads, and Bridge Design Software preferred., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription Lead Projects. Mentor Talent. Build the Future. Are you a skilled transportation engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Highway Department and take a leading role in the design and execution of critical transportation projects across New York State. In this role, you’ll manage projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in highway design modeling and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the region’s most impactful infrastructure efforts: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s degree in Civil Engineering or a related field., • Licensed Professional Engineer (PE) in New York State, • Minimum 8 years of experience in transportation design, with a strong focus on NYSDOT/Federal Aid projects, • Proficiency in AutoCAD/Civil 3D and MicroStation/OpenRoads, • Estimated Salary Range: $97,760 - $120,640/year* WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description RF Field Engineer (Entry Level) – UPNY C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. Description: We are currently seeking an entry level Radio Frequency Field Engineer to join our team in our Syracuse NY office. This position is for full time employment. The candidate will perform site surveys, system designs, gathering existing data and coverage as well as general site information. System troubleshooting, project management, activations, maintenance tickets, optimization, testing as well as some construction will all be a part of the job duties. The ideal candidate should be highly motivated and have the ability to work in a fast paced environment. Applicants must possess strong technical aptitude and be comfortable working in high pressure situations. The candidate will be interacting with customers and co-workers on a daily basis, and must be able to provide timely and detailed updates. Field Engineer will be exposed to various RF applications and should understand the best practices for any given situation. This position will require the individual to be in the field approximately 80% of the time. The candidate must be willing to travel with occasional overnight stays. Responsibilities: • Perform site surveys and in-depth site walkthroughs., • Troubleshoot and repair systems for optimal performance., • Project managing the construction and installation of Distributed Antenna Systems, keeping to all building codes and customer construction requests., • Perform system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment., • Design complete and accurate Distributed Antenna Systems using iBwave software., • Take lead on system commissioning, integrations, and activations., • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers., • Multi-task projects on a day-to-day basis., • Bachelor of Science in Electrical or Mechanical Engineering from an ABET - accredited academic institution., • Understanding of engineering design concepts, testing procedures, and possessing the ability to adapt to new procedures, equipment, and technologies., • Experience with basic construction tools (drills, screwdrivers etc.) and construction practices., • Ability to multitask and keep projects moving through different phases of their lifecycle by staying organized and communicating., • Ability to receive and give direction., • Strong oral and written communication skills., • Ability to work with a team diverse in skill, experience and knowledge., • Experience with 2D modeling programs such as AutoCad or Draftsight is preferred but not required., • Proficient in basic computer applications. (Outlook, Word, Excel, etc.)

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking an experienced Senior Project Engineer in the Buffalo, Rochester, or Syracuse, NY offices to support our growing railroad practice. You will be part of a team working on projects from conception through final design and construction. This position is diversified with opportunities to work in the office on the engineering design of railroad infrastructure and in the field with construction inspection/administration. You will work on a variety of designs and projects with the opportunity to learn and grow throughout your career at C&S. Position Responsibilities • Ability to work with internal and external staff on an individual and team basis., • Ability to motivate and mentor junior staff., • Strong written and oral communication, organizational, and interpersonal skills., • Ability to manage all aspects of smaller projects or assigned tasks as part of a larger overall project., • Work with team in Client relationship management and obtaining additional business opportunities., • Ability to challenge oneself and broaden knowledge base., • Willingness to be proactive and anticipate., • May require occasional travel away from the office, estimated 15%., • Utilize safe work practices in accordance with federal, state, local, and company standards., • B.S. in Engineering field, M.S. in related Engineering field a plus., • Registration as a Professional Engineer (P.E.)., • 10 or more years of railroad related design and construction experience., • Experience with preparation of contract documents from bidding though design and award., • Experience with AREMA Manual for Railway Engineering. Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. As an employee working on railroad related assignments with the need to occasionally visit railroad properties, you will be enrolled in our drug and alcohol testing program as mandated by the Federal Railroad Administration’s (FRA) 49 CFR 219 Drug and Alcohol Testing Requirements Program. A Candidate’s employment is contingent upon successful results of the test which will be covered and administered by C&S’s provider. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionPower-Flo Technologies is a leading distributor of electrical equipment offering one of the most comprehensive product and service portfolios in the state, including automation, drives, controls, power distribution, and motor repair. We are looking for an experienced Applications Engineer to join our Upstate New York team. You will play a critical role in delivering complete, real-world systems and solutions to our customers. Applications Engineer Primary Functions • Pre and post sales support for automation, PLCs, drives, motion control, and machine vision products and services., • Assist customers with proof of concept for automation, PLCs, drives, motion control, and machine vision applications, • Assist sales and account managers as necessary to close business., • Phone and On-Site customer support., • Preparation and execution of product training classes including development of course and materials., • Attend vendor training classes as offered and/or required., • Maintenance, appearance and upgrades to Machine Vision demos., • Weekly engineering activity report and schedule., • Target and plan for minimum $20K annual engineering and training billings., • Minimum 2 customer calls per week, whether technical or sales., • Monitor and complete assigned Engineering Tasks, • BS Engineering or equivalent technical degree, • Knowledge of automation, PLCs, drives, motion control, and machine vision applications, • Advanced computer skills: Windows, VM Ware, Networking, • Knowledge of Siemens programming and HMI software a plus, • Ability to operate a motor vehicle We are an equal opportunity employer offering competitive compensation and benefits package including health, disability, life insurance, 401(k) and long-term disability plans. Salary Range $75,000 - $125,000 annually About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionTitle: Sales Engineer Location: Syracuse, NY Type: Full Time Pay: $125,000 - $155,000 Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role Turtle & Hughes, Inc. in Syracuse, NY is actively searching for a Sales Engineer to join our team in our headquarters. The sales engineer is primarily responsible for quoting, selling, closing and managing small and medium sized projects in the Upstate New York marketplace and an integral part of the T&H Power Distribution team. What You'll Do • Responsible for quoting, selling and managing small – mid sized power distribution projects., • Must be proficient in reading blueprints and working with electronic bid software., • Must be highly organized and efficient to multitask projects from bid stage to closeout., • Maintain project schedule and deadlines and manage customer expectations., • Accountability for timely completion and profitability of projects., • Responsible for increasing the profit margin of a project through efficient take-off, sourcing and managing., • Manages and coordinates with all parties involved in the projects, both internal and external., • Follows established standards and procedures for project reporting, communication, and documentation., • Keeps detailed records on pricing quotes, change orders and all correspondence both internally and externally., • Keeps the companies best interests in mind while performing job., • Bachelors degree preferred., • Experience working directly with customers or electrical contractors., • Knowledge of project sales techniques and tools., • Proven experience in people management. We offer a competitive benefits package. Some of which include: • 401 (k) plan, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Paid Holidays, • Vacation Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated division provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website or our social medias! LinkedIn: @Turtle Instagram: @TurtleandHughes Facebook: @Turtle and Hughes Twitter: @turtleandhughes Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Associate Automation Engineer is a key member of the Digital Plant team that will support manufacturing Process Control Systems and Building Automation Systems at the Syracuse, NY manufacturing facility. The primary role of the Associate Engineer will be to design, implement and maintain systems that are controlled by Programmable Logic Controllers (PLCs) that support manufacturing and the site buildings. This role will require computer system validation work associated with commissioning and qualification of systems end to end from specification documents through IQ, OQ PQ. The role will work directly with manufacturing process experts and facility engineers to determine end user requirements, develop robust strategies and solutions, draft specification documents, perform testing, commissioning and qualification activities and work safely and efficiently in a high compliance environment. Training will be provided as necessary to enable skills in specific applications used to support this role. Duties & Responsibilities • Primary function will be to support the design, build, test, and maintenance of the various Allen-Bradley PLC's and Rockwell applications associated with process control and building automation systems for the site., • Support the design and build of vendor Rockwell PLC/ BAS roadmaps to align with site strategy., • Works with various PLC/BAS Vendors/ Integration specialists to ensure a safe and successful implementation effort is achieved., • Investigate the root cause of Digital Plant PLC/BAS problems and propose solution to prevent recurrence., • Draft and maintain living and project documentation for managed systems including design specifications, qualification documents and knowledge base articles., • Conduct all job activities in accordance with cGMP and EHS requirements., • Provide training of automated solutions with Automation and Instrumentation staff to ensure understanding how the PLC/BAS functions to assist with troubleshooting during off hours., • Research and propose new PLC/BAS technologies to ensure cost reduction and increased reliability., • Advanced knowledge of engineering or sciences generally attained through studies resulting in a B.S. in, engineering, science, biochemistry or related discipline or its equivalent is highly desired with 3+ years experience with PLC/BAS design/ troubleshooting/ implementation OR 7+ years experience with PLC/BAS design/ troubleshooting/ implementation, • Knowledge of PLC/BAS engineering relating to Rockwell Allen Bradley products., • Knowledge of products and technologies provided by major automation vendors, including but not limited to: Rockwell Allen Bradley, • Experience in system and hardware refreshes from legacy to current technologies for PLC/BAS Systems, • Ability to develop and execute innovative PLC/BAS solutions for continuous improvement., • Quote/ Proposal review experience to ensure adequate design meets site budget commitments and project deliverables, • Experience working with PID drawings, electrical layout and wiring diagrams, Industry Design Standards and equipment loop drawings., • Technical problem solving and analysis skills as well as good communications skills (verbal and written)., • Ability to effectively lead or participate in multi-disciplined team environment to achieve goals., • Knowledge and understanding of applicable regulatory requirements. This position is an office-based position which requires appropriate levels of personal protective equipment (PPE) when field work is required. Frequent repeated motions such as keyboarding are required. Work Environment This position is based indoors, and you will primarily be working with others, but also independently and alone at times. This position is a team & project-based position that will require occasional shift work, weekends, and holidays. This position offers a hybrid work schedule, with the flexibility to work from home up to 50% of the time. Travel The position may require up to 5% of travel. Target Bonus 8% Work Location: East Syracuse, NY New York Pay Range$60,000—$88,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Working largely independently, performs routine construction inspection services under the supervision of a Chief Inspector or Resident Engineer. May be responsible for review and assignment of work for Inspector(s)., • Duties include taking and documenting detailed measurements for payment, supervising material testing, notifying supervisor of issues and potential deviations from plans and specifications, and working with the contractor to resolve minor issues without guidance., • This position requires full knowledge of company standards, plans, and New York State DOT specifications. Qualified candidates will demonstrate familiarity and competence with various common job site conditions, will be able to clearly communicate project requirements to a contractor, and have the ability to resolve day-to-day disputes with a contractor, as well as have the experience required to know when to elevate an issue to their supervisor, all while maintaining detailed records of work and measurements and documentation for payment., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 5 years related experience, or similar position with experience in the construction field and transportation projects., • NICET Level III certification or successful completion of Fundamentals of Engineering exam required. Estimated Compensation Range: $79,040- 95,680.00/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Syracuse, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Duties • System selection and calculations for design purposes, • Conduct field work to document existing conditions, • Work with Jr Engineers to develop drawings with building modeling software, • Work independently and as part of a team to complete project designs, • 4 – 6 years of experience working at an A/E consulting firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Well rounded experience in HVAC, plumbing, and fire protection, • Experience with Revit or AutoCAD is preferred, • Field experience is preferred, • New York State Professional Engineer’s license is a plus, • Ability to work well with a team and good analytical skills Salary range: $70,000.00 - $90,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Whether you're already licensed or on the path to PE certification, you'll gain mentorship and work on meaningful bridge and transportation infrastructure projects that enhance safety, sustainability, and connectivity in the communities we serve. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience, structures/bridge design engineering experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Precast Engineer - Civil/Structural Join Our Team as a Precast Engineer – Shape the Future of Concrete Design & Innovation! Fisher Associates is hiring a full-time Precast Engineer to design and engineer high-quality precast concrete components for a variety of civil and structural engineering projects. You’ll ensure every element meets structural codes, safety standards, and project specs—delivering safe, reliable, and cost-effective solutions. Collaborate with a skilled, supportive team and grow your engineering career in a flexible, impact-driven environment. Apply now and engineer the future with us! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials., • Support Project Managers and Designers throughout the project lifecycle. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0 - 5 years minimum of transportation/structural engineering experience, • Concrete design engineering course or design experience preferred, • EIT or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description LaBella is currently hiring for a Senior Structural Engineer in our Syracuse, NY office. The Structures Discipline provides structural engineering services with emphasis on new design, repair and rehabilitation of constructed works, as well as investigation and performance evaluation. Individual must be able to work independently, as well as part of multi-discipline teams. Duties • Serves as a Lead Engineer who supervises a team of structural engineers, designers and technicians in production of structural construction documents including drawings, specifications, bidding and construction administration for large complex projects including calculation and document reviews., • Develops cost effective system layouts as well as performing calculations and coordination with other disciplines., • Performs site visits for documentation and cost estimating of existing systems and building conditions., • Prepares technical specifications., • Reviews and evaluates shop drawings and product submittals., • Visits construction sites to inspect work in progress or completed., • Maintains and manages budgets for projects including hours and resources., • Maintains client relationships, • Prepares Engineering Reports., • Completes complex and specialty types of design., • Stays abreast of technical advancements in respective field and disseminates information to others., • Minimum of 15 years of experience working in the consulting engineering industry., • Strong writing and communication skills., • Demonstrated ability to meet deadlines., • BS in Civil Engineering is required., • A New York State PE license is required., • Revit Experience is a plus., • Project history using computer analysis software experience is essential. Salary Range: $100,000 - $150,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Job Title: Field Construction Inspector (FCI) Location: Syracuse, NY Job Type: Full-time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Field Construction Inspector (FCI) to support railroad safety services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High school diploma or equivalent. Required Experience: Minimum 2 years of experience in one or more of the following, civil construction inspection involving grade separation projects, roadway paving/construction, utility work and/or experience with a Freight Railroad, Regional Short Line Railroad, Transit System, State DOT Highway or Rail Division, Railroad Supplier, Highway/Railroad Contractor, and/or Civil Engineering/Railroad Consultant. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the workplace and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and act before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various construction plans, OSHA/Railroad rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize workload to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables, • Thoroughness: Ability to ensure that one's work is complete and accurate. Job Requirements: • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Civil Highway Construction, or Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes week(s) at a time., • Ability to successfully complete Federal, Client, and/or Company Specific Training. Job Duties: • Provide jobsite coordination., • Provide clear and concise communication with Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough safety briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities., • Enforce Project Site Safety in accordance Federal, State, Local and Railroad polices. Work Environment: This job operates in a field environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions. Keywords: Civil Engineer, Construction Inspector, Construction Foreman, Construction Manager, Project Superintendent, Civil Engineering Technician, Safety Manager, Safety Inspector, Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Flagmen, Flag Person, Foreman, Foremen, General Manager (GM), Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manager Track Projects (MTP), Rail, Railroad, Railroad Project Manager, Railway, Railway Project Manager, Roadmaster, Roadway Worker, Roadway Worker In Charge (RWIC), Roadway Worker Protection (RWP), Safety, Signal Inspector, Signal Maintainer, Signal Manager, Signal Supervisor, Track Inspector, Track Maintainer, Track Manager, Track Supervisor. Safety Commitment: All employees of all levels are to always remain committed to safety while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important, and no service is so urgent that we may not take the time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true to our commitment to being the leader in safety throughout the railroad industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/orientation, gender identify, age, veteran status, national origin, or any other status protected by law or regulation. Job Posted by ApplicantPro

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities • Ability to motivate and mentor junior staff., • Project management, communication and multi-tasking skills., • Ability to work with internal and external staff on an individual and team basis., • Ability to challenge one’s self and broaden knowledge base., • Bachelor's of Science or Technology in Electrical Engineering, • 5-10 years of related experience, • PE preferred, FE required, • Experience with the National Electric Code., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash., • Experience with the layout and design of low voltage building distribution systems. *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescriptionThe Control Systems Sales Engineer is responsible for developing and securing automated control system projects across commercial, industrial and manufacturing applications. This role focuses on creating innovative process control solutions while maintaining strong profitability. The ideal candidate will combine deep technical knowledge of industrial automation with consultative sales skills to solve complex client challenges. Key Responsibilities • Develop and secure profitable automation and control system projects while meeting quarterly and annual sales targets, • Design and propose integrated control solutions building automation systems, • Create detailed technical proposals including system architecture, scope of work, and accurate cost estimates, • Provide technical guidance on process optimization and control strategies, • Conduct site surveys to assess existing systems and recommend improvements, • Stay current with industrial automation trends and new control technologies, • Develop and maintain relationships with system integrators and end users, • Provide technical presentations and demonstrations of control system solutions, • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field preferred, • 3+ years of technical sales and estimating experience in industrial automation, • Computer networking and server knowledge a plus, • Proven track record of meeting sales targets in a technical environment, • Excellent project estimation and scope development skills, • Strong presentation and interpersonal communication abilities, • Experience with major automation platforms (e.g., Allen Bradley, Siemens, Honeywell), • Knowledge of industrial networking and communication protocols, • Understanding of manufacturing processes and industrial applications, • Competitive base salary with performance-based incentives, • Comprehensive medical and dental benefits (employer/employee contribution), • 401(k) plan with company contribution, • Paid Time Off (PTO) and sick days, • 6 paid holidays, • Career advancement opportunities tied to company growth

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Infrastructure Engineer is responsible for the ongoing support, maintenance, and enhancement of both on-premises and cloud-based server hosting environments. This role involves designing, deploying, upgrading, and securing server infrastructure, including all associated hardware and software components. The engineer ensures the development of highly available, scalable, and secure infrastructure solutions, incorporating effective disaster recovery strategies. This position collaborates closely with IT Support, Business IT Analysts, Networking, and Cybersecurity teams to ensure seamless and uninterrupted operations. This is a hybrid position which requires employee presence 50-100% of the time. Duties & Responsibilities • Manage Windows updates, assist with Exchange Management console., • Manage IT Datacenter, Physical and Virtualized Servers, Virtualization Clustering, and SANs., • Design, develop, and deploy modular cloud-based systems., • Responsible/Accountable for server/application builds and qualifications for manufacturing and site cloud applications., • Manage Network Switches, Network Firewalls, IIS (Internet Information Services), Wireless Networks, and Gateways., • Maintain all system backups and participate in Disaster Recovery planning and execution., • Analyze, troubleshoot, and remediate server hardware/system related issues., • Support existing systems - proactively manage and maintain multiple systems to ensure performance and availability., • Work independently on assignments where considerable judgment and initiative are required in resolving problems and making choices, recommendations, or decisions., • Provide Level 3 support to users., • Provide off-hours support on a rotating basis as needed., • Collaborate with partners and customers to identify, scope, plan and execute digital modernization and asset life cycle management activities., • Ensure efficient functioning of data storage and process functions in accordance with company security policies and best practices in on-premise and cloud security., • Provides ownership and accountability for Asset Life Cycle Management within ServiceNow., • Owns Active Directory, Time synchronization with NTP, Network Domain and Domain Controllers in Windows environment., • Interact with clients, provide cloud support, and make recommendations based on client needs., • Performing/Assist in cloud infrastructure upgrades and updates to maximize system efficiency while minimizing downtime., • Work closely with IT Specialists, Engineering, Quality Assurance, and Validation teams in assessment, recommendation and implementation of computerized system applications that supports site Business and Manufacturing processes., • Bachelor's degree in Computer Science or Information Technology preferred; in lieu of a degree, a minimum of 3–5 years of high-level, hands-on IT experience is required., • Azure, AWS, or GCP certifications preferred., • Strong problem-solving skills, firm understanding of how to properly troubleshoot problems with as minimal client impact as possible, • Excellent project management, verbal communication, documentation, and technical writing skills, • Strong technical problem-solving abilities, written and verbal communication skills, • Demonstrated success of leading effectively in a complex matrix project team environment, • Team player with an emphasis on both knowledge sharing and learning, • Knowledge of Windows Operating System, Domains, and Group Policies, • Knowledge of Networking, Network Switches, Network Firewalls, IIS (Internet Information Services), Wireless Networks, and Gateways, • Experience and/or substantial understanding of industrial IT Datacenter, Physical and Virtualized Servers, Virtualization Clustering, and SANs, • Experience with Data accessing, storing and security within a cloud environment, • Skilled in Active Directory, Time synchronization with NTP, Network Domain, Domain Controllers, Networks, and Databases, • Ability to work in a diverse work environment, manage multiple priorities, and at times, be self-directed, • Familiar with cyber security best practices and industry-standard tools, • Experience with VPN, Routers, and Routing Protocols, • Perform in depth systems analysis on a multitude of technology devices, operating systems and software., • Ability to document, create, analyze and test computer systems, programs, software., • Exceptional understanding of advanced networking, including on-premise/cloud enterprise-grade infrastructure, as well as cloud-based network 'appliances' and interfaces, • Knowledge of integrating networking basics and virtual networks with cloud services, • Familiar with common languages (i.e. Python, Java, Golang, or Ruby) used in cloud computing, • In-depth, advanced understanding of the AWS/Azure ecosystem and technologies and how to apply them in reliable and efficient means are a strong plus, • Hands-on experience with Cisco appliances, ability to work within the CLI, are a strong plus Office-based position which requires appropriate levels of personal protective equipment (PPE) when field work is required. Frequent repeated motions such as keyboarding is required. Work Environment This position is based indoors and the employee will primarily be working with others, but also independently. This position requires employee presence, on site 50-100%. This position is a team & project-based position that will require occasional shift work, weekends, and holidays. Travel <5% travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range$76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Supervisor of Special Inspections is a Licensed Civil Engineer (PE) who serves as the project engineer in-responsible-charge of CME’s contracted special inspections and structural tests. Responsibilities • Initial set-up and management of the Project Special Inspections Program, • Act as a consultant on construction related problems, failures or issues, • Attend pre-installation conferences and relay Inspection Program requirements to team, • Technical review of test/inspection reports for compliance with the construction contract documents and the New York Building Codes, • Perform on-site inspections and report results, • Certification of the Inspection/Testing Program at project completion, • Act as liaison with Registered Design Professionals and Code Enforcement Officials, • Serve as Owner's Agent in execution of the Special Inspections Program and exercise duty of care to the public, • Manage non-conformance list, prepare project test & inspection plans, • Assist in the prevention of construction material failures and workmanship problems, • Bachelor’s degree, Civil Engineering or related, • Registered Professional Engineer (PE) or current Engineer-in-Training (EIT) with goal of earning PE, • Experience with building codes and standards governing special inspections and structural tests, • A friendly, forthright, diplomatic, and communicative business demeanor Benefits CME offers competitive wages and all benefits listed here: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal). All benefits become available to eligible employees upon completion of an eligibility period. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR DfLLKOgvno

Job Description As a Solar Engineer, you are responsible for providing ongoing field services support to multiple solar, battery storage (BESS) or other renewable energy systems on a continual/on-demand basis in order to optimize equipment performance, troubleshoot/resolve equipment issues, support emergency repairs and other provide ongoing O&M compliance support. In this role you will assist with all routine site inspections, maintenance projects, equipment & system testing, and other project compliance, troubleshoot or restoration matters. Solar Engineers regularly participate in field support, training and project safety orientations/classes in order to develop skills and technical expertise in one or multiple disciplines including PV array, inverter, medium voltage, BESS and other solar services. Leads and Managers will provide regular coaching and training and will qualify engineers for field operations. Solar Engineers may be responsible for such things as reviewing and assessing solar construction documentation; tracking and monitoring project documentation; evaluating construction and operational issues; meeting with other engineers, site hosts, developers, and investor/owners to present and review project operations, compliance and maintenance/repair matters; participating in industry forums; and possibly even dealing with clients directly. One general requirement for most solar engineering positions is a working knowledge of mechanical and electrical systems, and an understanding of a range of engineering concepts (such as site operations, assessment, analysis, and design, and energy optimization). Essential Job Functions & Responsibilities: Diagnose and repair systems failures as existing solar sites, identify and correct potential issues that may impact site performance in the future. Assist and support field teams with real-time solutions to site operations issues and execute the same. Diagnose/troubleshoot equipment failures and perform regular preventative maintenance on a variety of solar, BESS and other project equipment. Support field teams and clients via oversight/support of warranty matters regarding equipment and systems for use or replacement. Installs, removes, troubleshoots and the maintenance of solar, BESS and other related electrical equipment. Management and support of large scale commercial & Industrial (C&I) PV systems and battery storage systems (BESS) including all preventative maintenance, troubleshooting, repairs and operations; Frequent project site visits as well as remote troubleshooting/analysis via smart software platforms. PV site analysis, asset management, technical drawings/construction assessments, project management and system optimization. Ensure a safe, event-free work environment through strict adherence to company and client protocols, safety procedures and regulations. Ensure compliance with all safety requirements and safe best practices (e.g. lock-out/tag-out compliance, JHA completion, LDL testing, and compliance with all company safety policies or procedures and work practices). Prepare service tickets and reports for site visits, emergency repairs, equipment modifications and equipment improvement investigations. Provide reports, written and oral communication in a timely and complete fashion. Communicate with technical leads, project leads/managers, and third-party sub-contractors to ensure timely resolution to all required activities; Support recommended performance improvements and at address site safety and compliance concerns; Other responsibilities as directed by manager. Knowledge: Knowledge of National Electrical Code and standard design/construction practices; Understanding of OSHA safe workplace practices and procedures; Ability to read and understand electrical drawings; Electric and related utilities and utility maintenance Solar energy installation, maintenance and optimization Skills In addition to the specific work experience and skills, QE Solar also seeks someone with the qualities listed below: • Exceptional work ethic, with strong values and principles, • Able to supervise and coach others in a matrix work environment, • Willingness to work irregular schedules to meet client/project deadlines, • Exceptionally strong communication skills, both written and verbal, interpersonal, and teamwork skills, • A firm commitment to client, team, and organization success, • Flexible and accommodating and able to go above and beyond the basic expectations when required, • High follow-up and organizational skills, • Detailed-oriented, with attention to detail for tasks that have zero tolerance for errors, • Curiosity, • Candor and transparency Physical Requirements: Ability to lift 25/50/80 pounds regularly Ability to move safely over uneven terrain Ability to stand, sit or drive for prolonged periods Ability to safely climb ladders while carrying 50 pounds See also, Physical Demands Task Sheet. Working Conditions Primarily outdoors; Ability to work in extreme weather When working at home, desk conditions. Required Education: Bachelor’s Degree in Electrical Engineering. Required Experience: 0-3+ years of service industry project management experience, or, 0-2+ years of specialist, technical experience with solar projects, BESS, or other renewable systems; Experience with data acquisition systems; veterans or military experienced candidates are strongly encouraged to apply; Preferred Experience: 0-2+ years technical experience as a field technician; Experience working with 600v-1500v systems; Strong knowledge of NEC, IEEE and current NFPA-70e requirements; Proficient with technology and computing programs/platforms; C&I/Utility Scale solar work experience; Experience with operations of solar sites and/or project maintenance and compliance. Required Certifications, Licensures, Etc. Current, Valid, Active Driver’s License and QE Approved Insurance Coverage; Personal Work Vehicle. Preferred Certifications, Licensures, Etc. Inverter and/or BESS manufacturers’ certifications (e.g SunGrow, Power Electronics, Solectria, BYD, etc) a plus Thermography certifications (Level 1) IT/networking skills: Familiarity with RS485, Modbus, tcp/ip, etc. NABCEP PV Installer Certification Minimum OSHA 10/30 Certification Completion of NFPA 70E courses CPR/First Aid Required Other Clean Background Check and Motor Vehicle Report Workplace Type: On-site Salary Range: $30.00 - $40.00 per hour Employment Type: Full-time Location: Syracuse, NY United States Statement to all Third-Party Agencies and Similar Organizations: QE Solar accepts resumes only from contracted recruiting agencies with formal service agreements. Please do not send unsolicited resumes or outreach emails to our QE Solar employees, hiring managers, or team members without expressed consent or contract for services. QE Solar is not responsible for any fees or charges associated with unsolicited resumes or services.

Able to mentor Power Systems Engineers as directed. Able to write and stamp power studies and/or verify and stamp other Engineer power studies. Meet customers on-site and review and identify their needs; Provide Engineering cost estimates and bid proposals.

Job DescriptionDescriptionThe HVAC Sales Engineer is responsible for driving profitable growth in our HVAC mechanical systems division. This role focuses on developing and securing projects with strong margin potential while building long-term service relationships with new and existing clients. The ideal candidate will combine technical HVAC expertise with consultative sales skills to deliver comprehensive building HVAC solutions. • Develop and secure profitable HVAC mechanical system projects while meeting quarterly and annual sales targets, • Partner with Property Managers, Builders, and owners to influence construction documents and building HVAC systems., • Create detailed technical proposals including system design, scope of work, and accurate cost estimates, • Provide technical guidance on HVAC design application solutions, • Conduct site surveys to assess existing building systems and recommend improvements, • Stay current with trends, energy codes, and HVAC industry regulations, • Develop and maintain relationships with mechanical contractors and consulting engineers, • Monitor project profitability and manage change orders for active projects, • Provide technical presentations and demonstrations of HVAC control solutions, • Technical Schooling or:, • Bachelor's degree in Mechanical Engineering or related field, • 3+ years of technical sales experience in commercial HVAC systems, • Strong understanding of HVAC mechanical systems, • Proven track record of meeting sales targets in a technical environment, • Excellent project estimation and scope development skills, • Experience with construction documents and processes, • Knowledge of Project Management, • Familiarity with ASHRAE standards and building codes, • Experience in design-build HVAC projects

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Independently performs, tests, inspects and records technical work of the highest degree of complexity. Plans and coordinates field construction observation activities and reviews the work of and provides mentoring of other inspectors. Serves as a liaison between the Project Owner, Contractor, and Professional Engineer having project oversight., • Reviews materials against specifications, prepares change orders, prepares and reviews contractor payment applications, and ensures that project records are being prepared in accordance with accepted standards., • A Resident Engineer must be able to fully express thoughts in writing and compile summary reports of other inspectors. Must have the ability to perform with the highest degree of independence, and effectiveness, in the field or in the office, within parameters established through the project plans and specifications. Must be fluent in the use of computers as a tool to aid construction observation., • A Resident Engineer must be an effective communicator with good written communications skills. This position is often required to communicate the requirements of the project plans and specifications to the Contractor and negotiate impacts to the project from changed conditions., • The Resident Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Desired 10 years of related experience required, or similar position with experience in the construction field and transportation projects., • NICET Level IV certification or a Professional Engineer's (PE) license is required. Estimated Compensation Range: $89,440 - 108,160/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Creighton Manning, a GAI Company is seeking a talented Civil-Site Project Engineer. Oversight of entry level Assistant Project Engineers and technicians including, but not limited to, delegation of tasks, promoting quality standards, scheduling and coordinating of project deliverables. Ability to ve

Are you looking for a collaborative work environment where you can work on exciting and vital transportation projects that transform your community, where each person is valued and work-life balance is key? If so, come join our growing, multidisciplinary team of engineers based in the greater NY Cap

Key Responsibilities: Develop preliminary and final engineering plans for highway construction and improvement projects Design roadway elements including alignments, grading, drainage systems, and traffic-related features Provide technical guidance to junior team members and review design work for a

Axion Ray’s mission is to improve the quality and safety of engineered products - airplanes, electric vehicles, and medical devices, by creating the world’s best proactive management platform, powered by the latest advances in artificial intelligence. We're revolutionizing the way next-gen vehic

We're seeking a Senior DevOps Engineer to lead our initiatives and build resilient, scalable systems. Your Mission: As a Senior DevOps Engineer, you will design and implement cloud infrastructure on AWS, establish SRE practices, and improve system reliability. Background in security engineering to e

The OSTP requires both work and study over the three-year program period; program members must work 32 hours per week onsite at our Clifton Park, NY office during college semesters and approximately 40 hours per week on-site during summers. Computer Science and Computer Engineering bachelor’s degr