Trabajos Engineering en Syracuse, New YorkCrear alertas

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: * Define and develop RF system architectures for radar and advanced sensing applications. * Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. * Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. * Conduct trade studies and system optimization to balance performance, cost, and schedule. * Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. * Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. * Perform root cause analysis of system performance issues and recommend design changes. * Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. * Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). * 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. * Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. * Demonstrated experience deriving and validating system-level RF budgets. * Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. * Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. * Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. * Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). * US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: * Experience in phased-array architectures and beamforming. * Knowledge of military/aerospace standards and environmental testing. * Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: * Design, simulate, and develop discreet RF Tx/Rx modules for radar systems. * Conduct RF system-level analysis, link budget calculations, and trade-off studies. * Select and integrate components such as mixers, amplifiers, oscillators, and filters. * Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance. * Conduct laboratory testing, tuning, and validation of RF modules against specifications. * Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration. * Support troubleshooting and root cause analysis for performance anomalies. * Maintain comprehensive documentation for design decisions, test results, and compliance requirements. Compensation Range: $99,100 - $128,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field. * 5–8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band). * Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar). * Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro) * Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters). * Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization. * Experience with PCB design for RF and microwave circuits. * Familiarity with military or aerospace standards for RF systems is a plus. * US Citizenship and ability to obtain/maintain a security clearance. Preferred Skills: * Knowledge of phased-array radar architectures. * Electronics packaging concepts * Familiarity with thermal and mechanical considerations in high-frequency module packaging. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

At Saab, Inc. in East Syracuse, you have the opportunity to join a dynamic Quality Assurance team supporting the development of complex marine and ground-based radar systems. The ideal candidate will be eager to expand their Quality Engineering expertise and skills. Saab provides an excellent working environment with opportunities for advancement and professional growth, a competitive salary, and a comprehensive benefits package. Primary responsibilities will include: * Execute Quality Management System principles and processes. * Monitor and support the assembly process, performing inspections to identify potential non-conformances as early as possible. * Generate and review ECR/N documentation and participate in CCB activities. * Disposition and track nonconforming material. * Participate as a member of the Material Review Board and lead proposed corrective actions. * Perform internal audits to ensure process maturity and capability while maintaining compliance for customers, production, and supply chain functions. * Coordinate with external quality assurance auditors and technicians to ensure compliance. * Deliver a people-first culture in alignment with Saab’s leadership vision. Secondary responsibilities: * Support incoming inspection and inspection planning * Support calibration and maintenance of equipment. * Monitor and report on Saab internal quality metrics. Compensation Range: $70,200 - $87,800 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Engineering, Quality, or a related field. * 3+ years of experience; aerospace industry expertise is a plus. * MBA, M.Sc., or equivalent advanced education or certifications preferred. * Ability to work independently and deliver high-quality results. * Strong analytical and problem-solving skills with the ability to drive and lead change. * Working knowledge of Department of Defense (DoD) programs, procedures, and processes. * Working knowledge of Quality System Management per AS9100. * Working knowledge of SEI CMMI processes. Desired Qualifications: * ASQ Certified Quality Engineer (CQE) certification. * IPC or other relevant industry certifications. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you’ve got deep experience in commercial real estate, skilled trades or technology, or you’re looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. What this job involves: The Operating Engineer is responsible for operations & maintenance of building systems and equipment as part of the Facility Maintenance & Operations Team. This role handles routine and emergency plant operations, requiring general knowledge of industry maintenance practices and the ability to work independently. What your day-to-day will look like: • Inspect, troubleshoot, repair and adjust equipment to minimize service interruptions and downtime, • Execute maintenance and repair work for boilers, HVAC equipment, chillers, cooling towers, air handling units, and building infrastructure, • Perform complex operating procedures for high pressure steam boilers, lab utilities, emergency generators, and fire pumps, • Monitor water chemistry in various systems and make necessary adjustments, • Maintain mechanical spaces for safety and housekeeping to be audit-ready, • Respond to emergencies, identify problems, and take corrective actions, • Review and complete work orders, logs, and documentation in the BMS CMMS, • Ensure compliance with safety standards, OSHA regulations, and JLL policies Required Qualifications: • High school diploma or equivalent, • Must possess a valid driver's license, • Ability to work independently and plan work without direct supervision, • Skills to operate electric hand tools, work on ladders, and lift heavy loads, • Ability to operate required equipment and motor vehicles, • Physical capability to perform maintenance tasks Preferred Qualifications: • Working knowledge of building automation and system controls, • Experience with HVAC/R systems and boilers, • Proficient computer skills, • Ability to provide guidance and mentoring to team members Work Schedule: • 3x2 rotation: Alternating between day and night shifts every two weeks, • Day shift: 7am - 7pm, • Night shift: 7pm - 7am, • 12-hour rotating shifts, including weekends and holidays, • Overtime is required Salary/Comp: $64,000.00 + OT hours per year: 208 hours For the minimum salary ($64,000): Regular hourly rate: $30.77/hr. (based on 2,080 hours per year) OT hourly rate (1.5x): $46.16/hr. Annual OT value: 208 hrs. × $46.16 = $9,601.28 Total minimum compensation: $64,000 + $9,601.28 = $73,601.28 #HVACjobs #Ejobs #MMjobs #OEjobs Estimated compensation for this position: 73,601.00 – 73,601.00 USD per year This range is an estimate and actual compensation may differ. Final compensation packages are determined by various considerations including but not limited to candidate qualifications, location, market conditions, and internal considerations. Location: On-site –East Syracuse, NY Job Tags: Air Handling Units, Boilers, Chillers, Computerized Maintenance Management Systems (CMMS), Cooling Towers, Corrective and Preventive Action (CAPA), Documentations, Ensure Compliance, Facility Maintenance, General Repairs, High Pressure Steam Boilers, HVAC Equipment, HVAC Systems, Identifying Problems, Maintenance Operations, Maintenance Repair, Operation Maintenance, OSHA Regulations, Plant Operations, Safety Standards, Standard Operating Procedure (SOP), Steam Boilers, Troubleshooting, Working Independently If this job description resonates with you, we encourage you to apply, even if you don’t meet all the requirements. We’re interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: * 401(k) plan with matching company contributions * Comprehensive Medical, Dental & Vision Care * Paid parental leave at 100% of salary * Paid Time Off and Company Holidays * Early access to earned wages through Daily Pay JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL’s recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our ___. For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy ___. Jones Lang LaSalle (“JLL”) is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process – including the online application and/or overall selection process – you may email us at ___. This email is only to request an accommodation. Please direct any other general recruiting inquiries to our ___ page > I want to work for JLL. Pursuant to the Arizona Civil Rights Act, criminal convictions are not an absolute bar to employment. Pursuant to Illinois Law, applicants are not obligated to disclose sealed or expunged records of conviction or arrest. Pursuant to Columbia, SC ordinance, this position is subject to a background check for any convictions directly related to its duties and responsibilities. Only job-related convictions will be considered and will not automatically disqualify the candidate. California Residents only If you are a California resident as defined in the California Consumer Privacy Act (CCPA) please view our ___ which describes your rights and disclosures about your personal information. If you are viewing this on a mobile device you may want to view the CCPA version on a larger device. Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance, JLL will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Accepting applications on an ongoing basis until candidate identified.

At Saab, Inc. we design and deliver cutting-edge technology solutions that make a real-world impact, keeping people and society safe. We're looking for a dynamic Software Engineering Manager to lead a talented team of engineers in delivering high-quality software products on time and within budget. Role Overview As a Software Engineering Manager reporting to the Director of Software Engineering, you’ll be responsible for leading and developing a team of engineers to meet technical, program, and business objectives. You will collaborate across disciplines—including functional managers and program management—to ensure successful delivery of projects aligned with strategic goals. What You Bring * A passion for software excellence and innovation. * The ability to balance technical depth with business priorities. * A growth mindset and a commitment to continuous improvement—for yourself and your team. Key Responsibilities Team Leadership & Development Lead and develop a Software Engineering team focused on meeting technical, program, and business objectives. * Set clear goals aligned with business objectives and manage performance reviews, compensation planning, and career development. * Grow management and technical talent by identifying, crafting and implementing appropriate development plans. * Foster a culture of continuous learning through mentoring and providing growth opportunities. * Recruit and assign engineers to meet project and business demands. * Plan team capacity and build long-term staffing strategies. Project & Resource Management Ensure accountability for creation of accurate cost and schedule targets, and execution of technical effort in accordance with those targets. * Align team efforts with program schedules, budgets, and deliverables. * Provide accurate cost and schedule estimates (BOEs) for proposals and programs. * Track progress and adjust resources to meet project milestones. * Support contract negotiations and program planning. Technical Leadership Provide technical oversight and program support for the Software Engineering discipline to programs * Drive technical strategy and contribute to software architecture and design. * Collaborate with Systems, Firmware, Hardware, and Test Engineering to ensure cohesive design and requirements validation. * Assess technical risks and implement mitigation strategies. * Support technology road maps and innovation planning. Process & Quality Improvement Be a champion for the quality and continuous improvement of technical processes. * Champion best practices and process improvements in software development. * Ensure team adherence to quality standards, processes, and metrics. * Maintain modern toolsets and ensure efficient team workflows. Compensation Range: $161,700 - $218,300 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Education & Experience * Bachelor’s degree in Computer Science, Software Engineering or related field (Master’s preferred). * 15+ years in software engineering, including 5+ years in a leadership role. * Deep expertise in software development, especially object-oriented design, UML, and embedded systems. * Proficient in C/C++, Java, and tools like VS Code, DOORS, Git, SVN, and PTC Integrity Modeler. * Experience with multiple development methodologies like Agile, Waterfall, and Spiral. Leadership Skills * Proven ability to build, motivate, and lead engineering teams. * Strategic thinker with the ability to plan resources, budgets, and timelines effectively. * Strong communication and cross-functional collaboration skills. * Demonstrated success in developing technical talent and managing team performance. Ready to take the next step in your leadership career? Join us at Saab, Inc., where your impact matters. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

MV Recruiting is partnering with a very well-established, innovative architectural engineering firm to find an. Design complete mechanical HVAC systems. Stay current with mechanical codes.

Responsibilities Direct bridge design operations including structural load rating calculations, comprehensive structural analysis, and foundation system design Generate complete design plans, technical specifications, and detailed cost estimates for bridge and transportation infrastructure projects

✈️ Join the Consolidated Precision Products Team As A Summer 2026 Engineering Intern! ✈️ Location: Chittenango, NY (On-site) Term: Summer 2026 (May – August) Pay: $22-$25/hr Job Type: Temporary Fulltime/Hourly (on-site) Are you passionate about metallurgy and eager to gain hands-on experience in aerospace manufacturing? At Consolidated Precision Products, we are looking for a Metallurgy Engineering Intern to join our team this summer. This internship provides a unique opportunity to learn about the metallurgy of cast superalloys, the investment casting process, and the quality requirements essential for aerospace applications. What You Will Do: • Collaborate with Industry Experts: Work alongside metallurgists, engineers, and lab technicians to improve our processes and enhance operational efficiency., • Support Process Improvement: Assist in reviewing metallurgical, process, and dimensional trials, contributing to continuous improvements and cost-saving initiatives., • Data Analysis & Reporting: Analyze test results, summarize data, and help prepare technical reports to present findings and recommendations for improvement., • Hands-On Learning: Work with shop floor personnel to improve routings, instructions, and overall process performance based on their feedback., • Problem Solving: Utilize A3 problem-solving and PDCA methodologies to address challenges and identify process improvements., • Currently an Engineering Student: Preferably pursuing a degree in Materials/Metallurgy, Manufacturing, or Industrial Engineering, with at least two years of college coursework completed., • Curious and Analytical: A strong interest in solidification, metallurgy, chemistry, and thermodynamics, along with the ability to analyze and interpret data., • Problem-Solver: A creative thinker who can identify challenges and propose solutions, while working independently or as part of a team., • Physical Demands: This role requires 50% sitting and 50% walking/standing. You may occasionally need to lift up to 50 lbs unassisted., • Work Environment: You will work in both climate-controlled areas and occasionally on the shop floor, which may involve exposure to heat and dust. Interested? Apply now to be part of our team this summer at Consolidated Precision Products, and take your first step towards a rewarding career in the aerospace manufacturing industry. Learn More about Consolidated Precision Products: ___ CPP-Superior Metals Manufacturing is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Superior Metals Manufacturing, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations. This is a non-management position This is an internship position

Prime Financial Technologies is a software company with a mission to accelerate small businesses. At Prime, we harness advanced data science in credit decisioning to simplify and accelerate credit distribution to small and medium-sized businesses. Operating at the cutting edge of Embedded Finance an

You'll provide expertise and come up with quick and creative engineering solutions, constructing fighting positions, fixed and floating bridges, and obstacles and defense positions. Skills you’ll learn align with Construction & Engineering, Demolition & Explosives, Operate Heavy Equipment. As a Co

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing * Support construction managers in daily project planning and coordination activities. * Assist in monitoring project progress to ensure alignment with timelines and budgets. * Prepare and review project documents, reports, and schedules as directed. * Collaborate with teams to identify and resolve project-related challenges. * Conduct site visits to observe construction activities and ensure adherence to safety standards. What Are We Looking For * Strong organizational skills and ability to prioritize tasks effectively. * Excellent communication and teamwork capabilities. * Problem-solving aptitude with adaptability in dynamic situations. * Ability to learn and apply new concepts quickly to support project objectives. * Eagerness to gain practical experience in construction management. Conditions of Employment * Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. * Some positions require FMCSA regulated ongoing drug and alcohol testing. Work Environment * Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer * $23.00 to $27.00 per hour Equal Opportunity Employer - Minority / Female / Veteran / Disabled.

Schedule:** Remote and asynchronous—set your own hours - Commitment: ~20 hours/week - Duration: Through December 22nd, with potential extension into 2026 ## What You’ll Do - Draft detailed natural-language plans and code implementations for machine learning tasks - Convert novel machine

1\. Role Overview Mercor is collaborating with a leading AI research lab on a project to advance engineering problem-solving at the frontier of artificial intelligence. We are seeking experienced engineers with strong backgrounds in analytical problem design, real-world systems modeling, or competitive engineering problem-solving (university competitions, design challenges, or advanced coursework). The goal of this project is to create novel, rigorous, and multi-step engineering problems that challenge cutting-edge AI models—specifically those that cause the AI to fail or demonstrate reasoning limits—while supporting the improvement and training of advanced AI systems. This is a short-term, high-impact, fully remote opportunity for engineering professionals eager to apply their deep technical expertise to frontier AI research, with the possibility of project continuation based on performance. ## 2\. Key Responsibilities - Design original, advanced engineering problems that require creative reasoning, multi-domain integration, and precise analytical thinking. - Evaluate AI-generated engineering solutions for technical accuracy, completeness, and adherence to physical and practical constraints. - Identify logical gaps, incorrect modeling assumptions, or computational inaccuracies. - Provide complete, clear, and well-documented solutions and derivations using LaTeX formatting for equations and schematics. - Maintain high standards of technical precision, rigor, and conceptual depth. ## 3\. Required Qualifications Note: Applicants must be proficient in creating and formatting technical documents using LaTeX. You are a strong fit for this project if you have one or more of the following: - Advanced degree (or equivalent experience) in mechanical, electrical, civil, aerospace, or chemical engineering, or a related field. - Experience designing or grading complex analytical or design-focused problems (university level or professional exams). - Participation in or mentorship for engineering design or modeling competitions is preferred(e.g., Formula SAE, Shell Eco-marathon, ASME/IEEE/AIChE contests, robotics challenges, or design sprints). - Research or teaching experience involving applied problem formulation and quantitative modeling. Other qualifications: - Deep understanding of core engineering principles and real-world systems. - Ability to communicate step-by-step reasoning, assumptions, and derivations clearly. - Strong intuition for problem difficulty, structure, and conceptual progression. - Detail-oriented verification of results and internal consistency. ## 4\. More About the Opportunity - Time commitment: Minimum 20 hours/week; up to 40 hours/week available - Duration: Approximately 2 months, with strong potential for extension - Rolling onboarding; start typically within 1–2 days after approval ## 5\. Compensation & Contract Terms - $60–80 per hour, depending on experience and demonstrated performance - Open to contributors worldwide (English proficiency required) - Independent contractor arrangement - Weekly payments via Stripe Connect ## 6\. Application Process 1. Submit your resume or CV highlighting your engineering background and relevant accomplishments. 2. Participate in a short interview (20–30 minutes). 3. Complete a brief form outlining your experience with problem design, engineering challenges, or teaching. 4. Selected applicants will receive follow-up steps within a few days. ## 7\. About Mercor Mercor is a talent marketplace connecting top professionals with leading AI research organizations and technology labs. Its investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey. Thousands of professionals across science, engineering, and research disciplines have partnered with Mercor to contribute to frontier AI initiatives shaping the next era of innovation. We encourage all qualified applicants to apply. Mercor provides equal opportunity and reasonable accommodations upon request.

Mercor is seeking software engineers to support one of the world’s leading AI labs in building robust, high-performance systems that serve the needs of next-generation machine learning applications. This role involves using coding agents to perform a variety of realistic coding tasks on real world codebases. * * * You are good fit if you: - Have extensive experience using coding agents as part of your software engineering workflow (codex, claude code, etc.). - Fluent in one of the following languages: Rust, JavaScript/TypeScript, Python. - Contributions to open source projects. - Extensive work on robust personal projects that are shared publicly on GitHub. - Hold a Computer Science degree from a prestigious university in the U.S., Canada, U.K., Australia or New Zealand. - Currently located in the U.S., Canada, U.K., Australia or New Zealand. - Demonstrate exceptional attention to detail and rigorous problem-solving skills. - Excel in both written and verbal communication. * * * Role Highlights - Flexible workload: 10–20 hours per week, with potential to increase to 40 hours. - Fully remote and asynchronous—work on your own schedule. - Minimum duration: 2 weeks, with potential for extension. * * * Role Start Date - This role will begin early October with applications reviewed on a rolling basis. * * * Compensation and Legal Details - You will be legally classified as an hourly contractor for Mercor - We will pay you out at the end of each week via Stripe Connect * * * About Mercor Mercor connects elite creative and technical talent with leading AI research labs, headquartered in San Francisco, CA. Our distinguished investors include Benchmark, General Catalyst, Peter Thiel, Adam D’Angelo, Larry Summers, and Jack Dorsey. Apply today and redefine digital creativity alongside groundbreaking AI technologies!

1) Role Overview Mercor is engaging advanced CUDA experts who specialize in GPU kernel optimization, performance profiling, and numerical efficiency. These professionals possess a deep mental model of how modern GPU architectures execute deep learning workloads. They are comfortable translating algorithmic concepts into finely tuned kernels that maximize throughput while maintaining correctness and reproducibility, ### 2) Key Responsibilities - Develop, tune, and benchmark CUDA kernels for tensor and operator workloads. - Optimize for occupancy, memory coalescing, instruction-level parallelism, and warp scheduling. - Profile and diagnose performance bottlenecks using Nsight Systems, Nsight Compute, and comparable tools. - Report performance metrics, analyze speedups, and propose architectural improvements. - Collaborate asynchronously with PyTorch Operator Specialists to integrate kernels into production frameworks. - Produce well-documented, reproducible benchmarks and performance write-ups. ### 3) Ideal Qualifications - Deep expertise in CUDA programming, GPU architecture, and memory optimization. - Proven ability to achieve quantifiable performance improvements across hardware generations. - Proficiency with mixed precision, Tensor Core usage, and low-level numerical stability considerations. - Familiarity with frameworks like PyTorch, TensorFlow, or Triton (not required but beneficial). - Strong communication skills and independent problem-solving ability. - Demonstrated open-source, research, or performance benchmarking contributions. ### 4) More About the Opportunity - Ideal for independent contractors who thrive in performance-critical, systems-level work. - Engagements focus on measurable, high-impact kernel optimizations and scalability studies. - Work is fully remote and asynchronous; deliverables are outcome-driven. - Access to shared benchmarking infrastructure and reproducibility tooling via Mercor support resources. ### 5) Compensation & Contract Terms - Typical range: $120–$250/hour, depending on scope, specialization, and results achieved. Payments will be based on accepted task output over flat hourly. - Structured as a contract-based engagement, not an employment relationship. - Compensation tied to measurable deliverables or agreed milestones. - Confidentiality, IP, and NDA terms as defined per engagement. ### 6) Application Process - Submit a brief overview of prior CUDA optimization experience, profiling results, or performance reports. - Include links to relevant GitHub repos, papers, or benchmarks if available. - Indicate your hourly rate, time availability, and preferred engagement length. - Selected experts may complete a small, paid pilot kernel optimization project ### 7) About Mercor - Mercor connects domain experts with top AI research and technology organizations through project-based contracts. - Contractors operate independently, with full flexibility over methods, timelines, and tools. - Our mission is to help top engineers and researchers access frontier technical work without rigid employment structures.

Overview: We are looking for an Electrical Engineering Expert to review, validate, and refine electrical engineering-related questions for evaluating AI models. Your expertise in circuit design, power systems, signal processing, electromagnetics, and control systems will ensure these assessments' accuracy, realism, and instructional value. * * * Job Details: - Question Validation: Verify the accuracy and correctness of questions and answers related to circuit analysis, power electronics, control systems, electromagnetics, signal processing, and embedded systems. - Scenario Analysis: Review case-based queries (e.g., fault diagnosis in electrical circuits, power grid stability, control system optimization, embedded system design challenges) to ensure alignment with real-world engineering applications. - Research & Cross-Checking: Consult authoritative sources such as academic textbooks, IEEE journals, electrical standards (e.g., IEC, NEC), and technical reports to ensure factual consistency and technical accuracy. - Structured Feedback: Provide clear, well-structured feedback with justifications for question refinements, ensuring clarity, precision, and alignment with standard electrical engineering principles. - Quality Monitoring: Ensure each question effectively tests electrical engineering knowledge, problem-solving skills, and analytical reasoning, distinguishing between closely related concepts. * * * Ideal Qualifications: - Advanced Knowledge of Electrical Engineering: Strong understanding of circuit design, power systems, signal processing, control theory, and electromagnetics. - Analytical & Problem-Solving Skills: Ability to evaluate electrical engineering scenarios by analyzing circuit behavior, system responses, and energy efficiency. - Clear & Concise Communication: Ability to explain complex electrical concepts clearly while maintaining scientific and technical rigor. Experience in technical writing, research documentation, or engineering reports. - Attention to Detail: Skilled in identifying errors in circuit design, inconsistencies in equations, or incorrect technical explanations. * * * Minimum Qualifications: - Master’s degree or PhD in Electrical Engineering, Power Systems, Embedded Systems, or a related field. - 2+ years of professional experience in electrical engineering, circuit design, signal processing, or control systems. - Proficiency with engineering simulation tools, circuit analysis software, and electrical standards. - Strong technical writing skills with experience in scientific research, industry reports, or academic publications. * * * Additional Details: - The role is remote and asynchronous, i.e., you can primarily work on your own schedule. - This project will require approximately 20 hours of work over a one-week period. - Applicants must be based in the US or Canada. - This position is structured with clear expectations. Application and Onboarding Process: - After submitting your resume, you will have a 10-minute conversation with our AI interviewer to test your research and reasoning skills. - Within a few days, we will reach out for a follow-up call or decision on your application and move forward with project onboarding soon after. About : - Our team is based in San Francisco, CA - We [ in recruiting experts for top AI labs - Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey

Mercor is recruiting Civil Engineers as independent contractors working on a research project for one of the world’s top AI companies. This project involves using your professional experience to design questions related to your occupation as a Civil Engineer.Applicants must: - Have 4+ years full-time work experience as a Civil Engineer; and - Be based in the US, UK, or Canada Here are more details about the role: - We aim to make the hourly compensation rate offered to you competitive based on your professional background and geographic location (please note that the listed hourly compensation scale is for U.S.-based applicants and that that scale will differ depending on where a candidate is geographically based) - The work is fully asynchronous and can be done around your schedule - This project requires that you be able to commit a minimum of 15 hours per week - The work will last for approximately 3-4 weeks after you begin the project - Please note you will need access to a desktop or laptop computer for this project and that we cannot accept applicants who use chromebook computers With respect to pay and legal status: - We can meet industry-standard compensation expectations for your current role - We will pay you out weekly via Stripe Connect based on the number of project work hours that you log - You will be classified as an “at-will” contractor to Mercor - Please note that we cannot currently support H1-B or STEM OPT status candidates

1) Role Overview Mercor is seeking experienced PyTorch experts who excel in extending and customizing the framework at the operator level. Ideal contributors are those who deeply understand PyTorch’s dispatch system, ATen, autograd mechanics, and C++ extension interfaces. These contractors bridge research concepts and high-performance implementation, producing clear, maintainable operator definitions that integrate seamlessly into existing codebases. ### 2) Key Responsibilities - Design and implement new PyTorch operators and tensor functions in C++/ATen. - Build and validate Python bindings with correct gradient propagation and test coverage. - Create “golden” reference implementations in eager mode for correctness validation. - Collaborate asynchronously with CUDA or systems engineers who handle low-level kernel optimization. - Profile, benchmark, and report performance trends at the operator and graph level. - Document assumptions, APIs, and performance metrics for reproducibility. ### 3) Ideal Qualifications - Deep understanding of PyTorch internals (TensorIterator, dispatcher, autograd engine). - Strong background in C++17+ and template metaprogramming within PyTorch’s ecosystem. - Experience authoring or extending PyTorch custom ops or backends. - Working knowledge of performance profiling tools and GPU/CPU interplay. - Strong written communication and ability to deliver well-documented, self-contained modules. - Prior open-source contributions to PyTorch, TorchInductor, Triton, or related projects are a plus. ### 4) More About the Opportunity - Ideal for contractors who enjoy building clean, high-performance abstractions in deep learning frameworks. - Work is asynchronous, flexible, and outcome-oriented. - Collaborate with CUDA optimization specialists to integrate and validate kernels. - Projects may involve primitives used in state-of-the-art AI models and benchmarks. ### 5) Compensation & Contract Terms - Typical range: $100–$200/hour, depending on experience and project scope. - Structured as an independent contractor engagement, not employment. - Payments for services rendered on a milestone or weekly invoice cadence. - Confidentiality and IP assignment agreements may apply. ### 6) Application Process - Share a concise summary of your experience with PyTorch internals and systems-level programming. - Include links to open-source work, GitHub PRs, or sample operator implementations. - Provide hourly rate, availability, and relevant technical background. - Selected experts may complete a short, paid pilot module to demonstrate fit. ### 7) About Mercor - Mercor connects top-tier independent professionals with leading AI labs and research organizations. - Contractors retain full control over their work, schedule, and deliverables. - Our engagements focus on high-skill, high-autonomy technical work across AI systems and optimization

About the Role Mercor is seeking experienced industrial engineers to support a leading AI lab in advancing research and infrastructure for next-generation machine learning systems. This engagement focuses on diagnosing and solving real issues in your domain. It's an opportunity to contribute your expertise to cutting-edge AI research while working independently and remotely on your own schedule. ## Key Responsibilities - You’ll be asked to create deliverables regarding common requests regarding your professional domain - You’ll be asked to review peer developed deliverables to improve AI research ## Ideal Qualifications - 4+ years professional experience in your respective domain - Excellent written communication with strong grammar and spelling skills ## More About the Opportunity - Fully remote and asynchronous — complete work on your own schedule - Expected workload: 30 hours per week, with flexibility to scale up to 40 hours - Project start date: immediately, lasting for around 3-4 weeks ## Compensation & Contract Terms - Independent contractor engagement through Mercor - Hourly compensation, paid weekly via Stripe Connect - Payments based on services rendered; contractors maintain full control over their work schedule and methods . About Mercor - Mercor is a talent marketplace that connects top experts with leading AI labs and research organizations - Our investors include Benchmark, General Catalyst, Adam D’Angelo, Larry Summers, and Jack Dorsey - Thousands of professionals across domains like engineering, research, law, and creative services have partnered with Mercor on frontier AI projects We consider all qualified applicants without regard to legally protected characteristics and provide reasonable accommodations upon request. ## Earn $250 by referring Share the referral link below, and earn $250 for each successful referral through this unique link. There's no limit on how many people you can refer. Restrictions may apply. [Learn

GIS SPM can sit in Newburgh, NY or Syracuse, NY* Are you ready to lead innovation at the intersection of technology, data, and geography? As a Senior Project Manager in GIS, you’ll be the driving force behind complex geospatial projects that transform how communities plan, build, and thrive. You’ll guide talented teams through every phase—from concept to delivery—leveraging cutting-edge GIS solutions to solve real-world challenges. This role is perfect for a visionary leader who thrives on collaboration, strategy, and results, and who’s excited to push the boundaries of what’s possible with spatial data. Join us and make your mark where precision meets possibility! Responsibilities • Manage and/or review the development of project tasks, such as geodatabase design, assessment of client workflows, and project data collection processes associated with GIS projects to ensure a positive project deliverable by means of client satisfaction and profits., • Perform project quality control measures, coordinate with clients for onsite tasks, assist with outside agency responses, and perform site visits during field collection projects or on-call/on-site project tasks., • Develop project schedules, staff schedules, and communicate schedules to all budget managers., • Perform financial management, including invoice preparation, accounts receivable, and project profitability., • Manage multiple projects and workload with competing deadlines., • Prepare proposal scopes, project schedules, and change orders, as required., • Develops the skills and abilities of staff that are necessary for the successful execution of the work., • Utilize the company standard GIS procedures and participate in developing new/enhanced procedures., • Active involvement with marketing and business development., • Ensures compliance with and enforces company Health & Safety policies and procedures., • Perform other related duties as assigned. Qualifications • MS Geographic Information Systems, BS Geographic Information Science, Environmental Science, Geology, Geography., • Professional Geographic Information Systems (GISP)., • 10+ years of GIS experience., • Experience with project management for NY Federal, State, County and Local Government clients required., • Deep knowledge of utilizing ArcGIS Pro, ArcGIS Online, and ArcGIS Enterprise for project deliverables required., • Esri App Builders Experience and ArcGIS Developer knowledge., • Esri Apps related to ArcGIS Field Maps, StoryMaps, Survey123, Workforce., • Experience with GPS Data Collection processes utilizing ArcGIS Apps., • Understanding of Regional Utility and Regulations.

Datadog Notebooks provide customers with a collaborative surface for ad-hoc data analysis, technical documentation, incident postmortems and runbooks. The power and flexibility of Notebooks also makes it the perfect place to integrate AI tools that can augment user workflows. Our vision is that in Notebooks users can collaborate with each other and with AI agents seamlessly. We are looking for a product-oriented Staff Engineer to lead the development of AI-powered features. In this role you will work closely with product management to envision compelling workflows, coordinate with Datadog’s growing set of AI platform teams to better leverage internal tools, and build AI agents that can emulate deep technical expertise. You will help our engineers become more skilled and comfortable with AI-oriented development by building extensible systems, establishing standards, and leading by example. As a technical anchor in the organization, you will provide oversight and guidance for our full scope of systems, AI and otherwise. There is a tremendous opportunity for broad impact: we want to set the standard for AI development in observability products, starting in Notebooks but extending to Datadog’s other products. At Datadog, we place value in our office culture - the relationships and collaboration it builds and the creativity it brings to the table. We operate as a hybrid workplace to ensure our Datadogs can create a work-life harmony that best fits them. What You’ll Do: • Lead the development of high-visibility AI product initiatives, • Navigate tradeoffs between time-to-market and feature quality as we iterate towards excellence, • Keep up-to-date with standards and best practices in the rapidly evolving AI landscape, • Architect, implement and oversee systems from inception through deployment and delivery to customers, • Lead the development, maintenance and growth of key services, APIs and user experiences, • Provide technical oversight and leadership across organizational boundaries, • Mentor and grow other engineers on the team and beyond Who You Are: • You have a BS/MS/PhD in a scientific field or equivalent experience, • You have 10+ years of relevant engineering experience, • You have several years of experience leading cross-team initiatives in product-oriented development, • You have strong customer empathy and a drive to make an impact, • You have experience building agentic workflows for customer-facing products, or are strongly interested in doing so Datadog values people from all walks of life. We understand not everyone will meet all the above qualifications on day one. That's okay. If you’re passionate about technology and want to grow your skills, we encourage you to apply. Benefits and Growth: • Get to build tools for software engineers, just like yourself. And use the tools we build to accelerate our development., • Have a lot of influence on product direction and impact on the business ., • Work with skilled, knowledgeable, and kind teammates who are happy to teach and learn, • Competitive global benefits, • Continuous professional development Benefits and Growth listed above may vary based on the country of your employment and the nature of your employment with Datadog.

The Company is seeking a Vice President of Operations and Engineering to spearhead the alignment of all related departments with the organization's strategic goals. Key responsibilities for the Vice President of Operations and Engineering at the company include supervising the engineering team, fost

CDM Smith's Environmental Services Group is seeking an Engineer, Scientist or Geologist with a. Sediment Remediation Specialist (Engineer, Scientist or Geologist).

Bachelor's Degree in Civil, Environmental, or Mechanical Engineering and minimum of 6 years qualifying engineering experience in the Wastewater Treatment engineering design field developing detailed process mechanical designs ; or. An Associate's Degree or technical school certification in civil or

C&S is seeking Project Designer / Architect with strong design, technical and creative skills to provide architectural design and project management services. Experience gained through full-time employment under the supervision of a licensed Architect or Interior Designer.

The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, stud

Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; and requesting special services. Mechanical Engineer Job Duties: Designs mechanical and electromechanical products and systems by developing and testing spec

The Department of Engineering Science and Technology is pleased to invite applications for Adjunct Instructors to support Electrical Technology, Mechanical Technology, Electromechanical Technology and Welding Technology degree programs.

Senior Engineering Manager, Product APIs.North America's leading provider of integrated entertainment, sports content, and casino gaming experiences.From casinos and racetracks to online gaming, sports betting and entertainment content, we deliver the experiences people want, how and where they want

Validates server solution by developing and conducting test scripts. Improves server solutions by conducting systems analyses; identifying problems; evaluating alternative solutions. Java Server Engineer Job Duties:

Supplier selection and evaluation: Assess potential suppliers' capabilities through technical reviews, quality system audits, and site visits to ensure they can meet quality requirements. Mentorship and leadership: Provide guidance and coaching to junior quality engineers on supplier quality managem

Join Pass & Seymour inSyracuse, NYas aMechanical Engineer – New Product Development, where you’ll play a pivotal role indesigning, developing, and launching innovative electro-mechanical productsthat power everyday life. Serve as an on-site technical representative to resolve product performance

We are extremely competitive, client-focused and realize that our value is in our ability to deliver the right solutions at the right time.

Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related field. The ideal Mechanical/Manufacturing Engineer will have the following qualifications:. Room for professional growth and development within the engineering and manufacturing department.

Perform qualification experiments and create documentation confirming results as defined by Quality Engineers.

Coordinating with other engineering disciplines to produce final construction drawings and details associated with mechanical engineering projects. Ability to work across a wide range of areas within the mechanical engineering discipline. The selected candidate for this position will be expected to

The Operating Engineer is responsible for operations & maintenance of building systems and equipment as part of the Facility Maintenance & Operations Team.

Senior Manager - GTM Engineering, Customer Success. We're on the front lines of driving productivity for our customersand we expect the same mindset from our team. At Apollo, we're driven by a shared mission: to help our customers unlock their full revenue potential.

Typical projects include bridge and culvert rehabilitations and replacements, retaining wall design, miscellaneous structural design for transportation infrastructure, and construction engineering support. Perform structural analysis and/or stability review of existing/new bridges/structures for pro

Contribute to the design of engineering solutions; design the feasibility testing approach and supervise its implementation to support the development and validation of engineering solutions. GHD is a global professional services company that leads through engineering, architecture, and construction

The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Divi

This is a detailed description of the job role.It includes responsibilities and requirements for the position.The content is meant to provide a comprehensive overview of what the job entails.The job requires a candidate with specific skills and experience.It is important to highlight the qualificati

Position Summary: Team Leader is responsible for ensuring that the bridge is inspected and that the inspection reports are prepared in conformance with the requirements per NYSDOT Specification. Lead inspection team and coordinate teams and equipment.

At Butter Payments, we're on a mission to eliminate involuntary churn and make recurring payments seamless. Every year, billions of dollars are lost due to failed payments. Butter leverages machine learning, deep financial data partnerships, and behavioral insights to ensure the right payments go th

Three years of experience working in technical support is preferred, however, if you have the ability, integrity and capacity to join our team we are willing to hire and train you for success. Approaching every situation with an optimistic attitude. As a Helpdesk Engineer you will be a member of a t

We are seeking an experienced Structural Project Engineer for bridge and other transportation-related projects to join our consulting firm in Albany, Poughkeepsie, Syracuse, or White Plains, New York. Typical projects include bridge and culvert rehabilitations and replacements, retaining wall design

Job Title: Overhead Transmission Engineer Location: Syracuse, NY About the Role We are seeking a motivated Overhead Transmission Engineer to support the design and development of overhead transmission systems for power delivery projects. Prepare engineering documents, calculations, and drawings, whi

Enterprise Data Solutions Architect Contract – Remote (Eastern Time Hours Only) Pay: $65–$80/hour (DOE) Our client, a nationally recognized financial services organization, is seeking a hands-on Enterprise Data Solutions Architect to own data quality, reporting governance, and technical oversight for a growing Power BI environment. You’ll be the onshore anchor for report accuracy, defect triage, and BI best practices across 40+ enterprise reports. What You’ll Do Validate data across multiple sources and investigate discrepancies Review existing reports/datasets and deliver a 30-day assessment of risks and improvements Govern and optimize Power BI workspaces, including permissions, models, and refresh logic Write/interpret SQL and partner with offshore/IT teams on Azure Data Lake and BI pipelines Lead a daily 9–11 AM ET overlap window with offshore resources and align work with business needs What You Bring Strong hands-on Power BI experience, including workspace governance SQL skills (intermediate–advanced) and understanding of Azure data environments Working knowledge of DAX, Power Query, ETL/ELT, and BI architecture Highly independent, proactive, and comfortable in ambiguous, fast-changing environments Strong communicator who can challenge assumptions and translate business needs into data solutions Contract Details 6-month contract with strong potential for extension or conversion Workload expected to last 12+ months Fully remote, but must work Eastern Time Zone hours daily (mandatory) To apply, please submit a resume to for immediate consideration. Sapphire Recruitment is an EOE