Trabajos valve en Elizabeth, New JerseyCrear alertas

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Operates and maintains the water distribution system. Supports the installation, inspection, maintenance, repair, and replacement of water mains, service connections, hydrants, valves, meters, and related distribution components. Responds to customer service requests, performs water meter readings and changes, and provides occasional support to Veolia operations and other locations as needed. Primary Duties/Responsibilities: • Assist with the installation, replacement, repair, and maintenance of water mains, service connections, fire hydrants, valves, meters, and related appurtenances., • Operate, monitor, and maintain water distribution facilities, systems, and related equipment., • Perform leak inspections on water mains and service connections and assist with leak detection, investigation, and repair activities., • Conduct utility mark-outs in accordance with applicable procedures and regulatory requirements., • Respond promptly and professionally to alarms, emergency call-outs, customer complaints, and service requests, including meter readings, meter changes, high-bill investigations, low-pressure concerns, discolored water, and other distribution-related issues., • Collect water samples for process-control and regulatory compliance monitoring in accordance with established procedures., • Perform routine preventive maintenance, inspections, troubleshooting, repairs, and housekeeping for facilities, vehicles, tools, and equipment., • Maintain the cleanliness, appearance, security, and general condition of facilities and company vehicles under Veolia’s responsibility., • Properly operate, clean, inspect, and maintain utility tools, vehicles, and equipment, including tapping machines, portable ditch pumps, generators, pipe- and leak-detection equipment, jackhammers, backhoes, and related equipment., • Assist with excavation, trenching, shoring, backfilling, compaction, pipe installation, hydrant work, valve operations, and restoration activities, as required., • Assist with water main shutdowns, isolations, flushing, pressure checks, disinfection, and returning repaired or newly installed facilities to service., • Perform hydrant inspections, flushing, repairs, and maintenance, including documenting deficiencies and reporting conditions requiring follow-up., • Assist with meter installation, testing, maintenance, replacement, and related service-line work., • Read, record, and maintain accurate meter, inspection, maintenance, sampling, repair, and service documentation., • Complete work orders, service reports, inspection forms, equipment logs, and other required records accurately and in a timely manner., • Identify and report abnormal operating conditions, damaged infrastructure, safety hazards, equipment problems, leaks, and other conditions requiring corrective action., • Maintain an appropriate inventory of tools, materials, parts, and supplies; report shortages and assist with loading, unloading, and securing materials., • Coordinate with supervisors, contractors, customers, public agencies, and other personnel as necessary to complete assigned work safely and efficiently., • Follow applicable traffic-control, excavation, confined-space, lockout/tagout, personal protective equipment, and other safe-work requirements., • Participate in emergency standby and scheduled on-call rotations as directed by management., • Comply with all company safety policies, procedures, programs, environmental standards, and applicable regulatory requirements., • Provide backup support to other New Jersey projects as needed., • Perform special projects and other related duties as assigned by management. Work Environment: • Work is performed in operational environments, both indoors and outdoors, with exposure to noise, machinery, varying temperatures, inclement weather, and other adverse conditions for extended periods., • May occasionally be required to enter and work in confined spaces.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • 3+ years of experience with water distribution operations, sampling and valve operation required. Knowledge/Skills/Abilities: • Ability to read, write, communicate effectively in English, and perform basic mathematics, measurements, and unit conversions., • Ability to read, interpret, and accurately record information from meters, gauges, control panels, computer systems, work orders, and technical documents., • Mechanical aptitude and ability to operate, inspect, troubleshoot, and maintain water distribution equipment and tools while recognizing abnormal conditions and safety hazards., • Ability to follow procedures, complete required documentation, use basic computer systems, respond to emergencies, and work effectively with others. Required Certification/Licenses/Training: • NJ License Class W1 preferred., • Valid New Jersey driver’s license required, CDL Class B preferred. Physical Requirements: • Ability to stand and walk for extended periods, including walking up to approximately five miles per shift; frequent use of hands for handling, grasping, and fine motor tasks., • Ability to climb stairs and ladders; work on catwalks, platforms, and elevated structures up to 50 feet; and work in various positions, including standing, bending, stooping, kneeling, squatting, and reaching overhead or in front of the body., • Ability to use hand tools weighing up to 15 pounds with arms extended for periods of up to 40 minutes., • Ability to lift and carry up to 50 pounds regularly and occasionally up to 60 pounds for distances of approximately 10 feet., • Requires close visual and auditory attention to identify equipment malfunctions, abnormal conditions, and safety hazards. Additional Information Pay Range: $25.00 to $28.00 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – 15 days Eligible for up to 3% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

About the Company Our client, an industry leading manufacturer of precision metal and steel components, has an immediate need for an experienced Senior Project Engineer – Nuclear, to join their winning team in Springfield. About the Role Our candidate of choice will be accountable to plan, direct, manage and coordinate all engineering functions related to design, and development of fluid flow components specifically exposure to valve design in nuclear industry and modifications of existing product line for manufacturing and customer requirements. You will support design, production, planning, quality, delivery schedule and other company functions to enable successful production. Responsibilities • Review customer technical specification, Valve data sheet and select the valve model from existing valve data bank or design new valve. Is primary individual responsible for technical performance of product., • Review and comment on customer requested design changes if they have any., • Assist and advise the Chief Engineer regarding technical information pertaining to customer specifications on new orders., • Prepare detail component drawings, bill of material, test procedure, test report, OMM and perform other support functions in order to meet deadlines, commitments and manufacturing. Whenever possible, modify existing parts to speed process., • Prepare and release all the drawings and other documents required prior to formal release to production., • Produce operability calculations to ensure compliance with customer specifications/requests. This is accomplished by static analysis of the valve, keeping in mind force balance, considering pressure forces, spring forces, coil forces, and seismic forces., • Must have excellent analytical skills and be able prepare ASME code Design Report using Mathcad software., • Prepare and release commercial grade dedication (CGD) documents defining critical characteristics of valve components., • During the production stage, as required, provide support in such areas as MRR’s (material rejection report), repairs, assembly, and testing operations., • Perform liaison having to do with providing technical information to purchasing, production, and any other support departments on matters dealing with procurement of special material, specifications, available sources, subcontracting, and troubleshooting., • Support other engineers in groups, quality engineers, test engineers and production lab personnel on valve design so that they can become familiar with the design expectations and documentation of the unit., • Work within the team to ensure accurate and timely response to customer requirements., • Performs additional duties as needed., • Keep well informed on new developments in the engineering field through contact with educational institutions, professional societies, manufacturers and trade shows, perusal of texts, technical papers, journals, and periodicals. Qualifications • BSME with PE License., • Additional schooling – master’s degree in mechanical engineering is preferred. Required Skills • Valve design and electrical component training is a definite plus., • Five years’ design experience of fluid flow components including minimum three years of valve design in nuclear industry, with a demonstrated ability to design develop and prove new concepts and modification of existing products., • General knowledge of ASME Section III Codes, ASME/ASTM material for valves in Nuclear Industry and awareness with some military standards., • Familiar with ANSI B16.34, B31-1, and B31.3 valve design standards., • Strong understanding of geometric tolerance techniques based on ANSI Y14.5M., • Knowledge of CSA N285.0 Canadian standards., • Experience with commercial grade dedication (CGD), appendix-B, and part 21 for Nuclear Industry is required., • Basic knowledge of stress analysis and ASME code formula to prepare valve design reports., • Strong analytical skills and attention to detail are must., • Mathcad software would be a benefit., • Acquainted with EPICOR system., • Working knowledge of PC based CAD system (by choice – SOLIDWORKS). Preferred Skills • Valve design and electrical component training is a definite plus., • Mathcad software would be a benefit., • Acquainted with EPICOR system., • Working knowledge of PC based CAD system (by choice – SOLIDWORKS). Pay range and compensation package • Compensation: 120000.-150000. / Annually, • Benefit Offered: YES Equal Opportunity Statement Our client is committed to providing equal employment opportunities to all employees and applicants for employment and to creating an inclusive work environment that values diversity. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Responsibilities will include proper operation of equipment, component level & final cleaning of assemblies. Some assembly work will take place when required. Following is a summary of the essential functions for this job. Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time. Trained to perform cleaning, cleanliness verification, and packaging per: • S308, • S311-4 / -5 / -6 / -8, • Approved Valve-specific Engineering drawing and:, • Cleaning Procedures (CPs), • Test Procedures (TPs), • Test Reports (TRs), • Qualification Procedures (QPs), • Others as required Performs: • Pre-cleaning / bulk cleaning using pre-cleaning equipment and established methods, • Gowning / de-gowning for an ISO Class 5 cleanroom, • Precision cleaning of piece parts, kits, and assemblies, • Cleanliness verification for contamination (FOD), damage, and defects utilizing:, • Evident CIX100 Particle Counting Microscopes, • White light visual verification, • Ultraviolet visual verification, • Total Solids Analysis, • Non-volatile Residue Analysis, • Manual microscopes and video scopes, • Packaging cleaned hardware per process or hardware-specific instructions, • Maintenance checklists to monitor and maintain, • Clean environment and equipment, • Stocks of consumables (solvents, bagging plastic, gowning items, etc.), • Functional testing of electrical and pneumatic valve systems as required, • Training of new technicians and providing feedback to engineering teams for continuous improvement of documents, procedures, tooling, and methods. Salary Range:$27.00 To $35.00 Hourly Valcor Engineering Corporation is looking for individuals who are highly skilled, diligent, practical, productive, reliable, inventive, self-motivated, patient, conscientious, problem solvers, organized, cooperative, flexible and positive. Character and attitude are extremely important. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Responsibilities will include proper operation of equipment, component level & final cleaning of assemblies. Some assembly work will take place when required. Following is a summary of the essential functions for this job. Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time. Trained to perform cleaning, cleanliness verification, and packaging per: • S308, • S311-4 / -5 / -6 / -8, • Approved Valve-specific Engineering drawing and:, • Cleaning Procedures (CPs), • Test Procedures (TPs), • Test Reports (TRs), • Qualification Procedures (QPs), • Others as required Performs: • Pre-cleaning / bulk cleaning using pre-cleaning equipment and established methods, • Gowning / de-gowning for an ISO Class 5 cleanroom, • Precision cleaning of piece parts, kits, and assemblies, • Cleanliness verification for contamination (FOD), damage, and defects utilizing:, • Evident CIX100 Particle Counting Microscopes, • White light visual verification, • Ultraviolet visual verification, • Total Solids Analysis, • Non-volatile Residue Analysis, • Manual microscopes and video scopes, • Packaging cleaned hardware per process or hardware-specific instructions, • Maintenance checklists to monitor and maintain, • Clean environment and equipment, • Stocks of consumables (solvents, bagging plastic, gowning items, etc.), • Functional testing of electrical and pneumatic valve systems as required, • Training of new technicians and providing feedback to engineering teams for continuous improvement of documents, procedures, tooling, and methods. Salary Range:$22.00 To $30.00 Hourly Valcor Engineering Corporation is looking for individuals who are highly skilled, diligent, practical, productive, reliable, inventive, self-motivated, patient, conscientious, problem solvers, organized, cooperative, flexible and positive. Character and attitude are extremely important. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: We are seeking a Principal Magnet Cryogenics Engineer with over 10-15 years of industry experience to lead the complete program lifecycle—from concept through commissioning—of large-scale cabled High-Temperature Superconducting (HTS) magnet systems for next-generation fusion reactors. In this role, you will hold end-to-end technical ownership for the cryogenic design, thermal-hydraulic modelling, forced-flow cooling distribution, and cryogenic integration of large-scale CICC (Cable-in-Conduit Conductor) or advanced stacked-tape HTS magnets. You will bridge megawatt scale cryogenic plant engineering with microscopic thermal-hydraulic magnet behaviour, leading multi-disciplinary teams through multi-million-dollar hardware deliverables. Key Responsibilities: • Program Lifecycle Ownership: Lead the complete lifecycle (Conceptual, Preliminary, Detailed Design, Qualification, Fabrication, Assembly, Commissioning, and Decommissioning) for large-scale HTS fusion magnet cryogenic systems., • Cryo-Thermal System Architecture: Design, model, and validategaseous helium (gHe), or sub-cooled liquid nitrogen (sLN2) thermal management systems tailored to high-field HTS cabled conductors (stacked HTS conductors)., • Thermal-Hydraulic Modeling: Perform dynamic thermal-hydraulic analysis, transient load modelling (nuclear heating, AC losses, eddy currents, ramp rates), and margin calculations under operational and fault conditions., • Quench & Fault Management: Own the cryogenic response strategy during quench events, including rapid helium expansion, overpressure relief sizing, burst disc integration, and thermo-mechanical stress containment., • Large-Scale Infrastructure & Plant Integration: Define requirements for mega-watt class cryogenic plants, cold compressors, heat exchangers, sub-coolers, helium distribution boxes (valve boxes), and low-heat-leak transfer lines., • Joints & Current Leads: Oversee cryogenic thermal management for high-current demountable or permanent HTS joints and conduction-cooled hybrid (HTS/LTS) gas-cooled current leads (60+ kA)., • Vendor & Subcontractor Governance: Manage major sub-contracts for large-scale cryogenic infrastructure, conductor fabrication, pressure vessels, and vacuum insulated systems (cryostats)., • V&V and Commissioning: Plan and execute full-scale cryogenic and high-current magnet test campaigns, leading cool-down, steady-state operation, quench mitigation, and warm-up procedures.Required Experience:, • 10-15+ Years of Direct Experience in cryogenic engineering and thermal-hydraulic design for superconducting magnet systems, with a primary focus on HTS tape/cable architectures (REBCO/BSCCO)., • Large-Scale Fusion/Physics Program Delivery: Proven track record of ownership over large-scale (> $10M+) magnet work packages within fusion energy programs (e.g., W7x, ITER, JT60SA, KSTAR, DEMO) or major scientific facilities (e.g., CERN, FERMILAB)., • Cabled HTS Architecture: Demonstrated expertise in high-current (tens of kA) cabled HTS configurations (e.g., Cable-in-Conduit Conductors, stacked tape conductors) and forced-flow cooling strategies., • Full Lifecycle Track Record: Experience taking at least one major superconducting magnet or cryogenic system from initial concept through initial cool-down and operational validation., • Regulatory & Code Compliance: Deep familiarity with pressure vessel standards applied to cryogenic temperatures (ASME BPVC Section VIII, EN 13445, B31.3) and cryogenic safety standards (ISO 21010/CGA).Technical Knowledge, • HTS Material Physics: Solid understanding of critical surfaces for REBCO coated conductors, strain sensitivity, thermal margin assessment, and current sharing regimes., • Cryogenic Fluids & Thermophysical Properties: Mastery of low-temperature fluid dynamics (gHe, sLN2) using database tools., • Transient Thermal Analysis: Deep domain knowledge of AC losses (coupling, hysteresis, flux creep) nuclear volumetric heating, heat-leak budgets, and conduction/radiation thermal shielding (MLI design)., • Instrumentation & Controls: Extensive knowledge of low-temperature thermometry (Cernox, TVO, optical fibers/FBG), cryogenic flow meters, pressure transducers, and cryogenic valve telemetry.Skills & Competencies, • Computational Tools: Proficiency in finite element analysis (FEA) and thermal-hydraulic system modeling tools (e.g., COMSOL Multiphysics, ANSYS Thermal/CFD, MATLAB/Simulink)., • System Engineering & Requirements Flowdown: Capability to write clear system requirement documents (SRDs), interface control documents (ICDs), and lead major design reviews (CoDR, PDR, CDR)., • Leadership & Team Mentorship: Demonstrated ability to lead cross-functional engineering teams (structural, electrical, vacuum, systems) and mentor junior magnet/cryogenic engineers., • Strategic Risk Mitigation: Mastery of FMEA, applied to cryogenic system failures, vacuum loss (loss of vacuum/L VAC), and runaway quench scenarios.Company Benefits:, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Commercial / Industrial Chiller Technician Location: Lakewood, NJ Position Type: Full-Time Reports To: Service Manager / Operations Director Job Overview We are seeking an experienced and certified Chiller Technician to join our HVAC/R service team. In this role, you will be responsible for installing, inspecting, maintaining, troubleshooting, and repairing large-scale commercial and industrial chiller systems (centrifugal, screw, scroll, and reciprocating). The ideal candidate has deep technical knowledge of thermodynamics, electrical controls, and refrigerant safety, along with a strong commitment to preventative maintenance and client satisfaction. Key Responsibilities Maintenance & Inspection • Perform routine preventative maintenance on air-cooled and water-cooled chillers, cooling towers, pumps, and auxiliary equipment., • Inspect electrical wiring, motor starters, compressors, heat exchangers, and safety controls to ensure peak operating efficiency., • Monitor oil levels, oil pressure, fluid levels, and refrigerant charges; perform tube brushing and oil/filter changes as required. Diagnostics & Repair • Diagnose complex mechanical, electrical, and refrigeration faults using electronic meters, pressure gauges, and diagnostic software., • Perform major component overhauls and repairs, including compressor rebuilds/replacements, valve replacements, and leak repairs., • Troubleshoot low-voltage and high-voltage control circuits, variable frequency drives (VFDs), and Building Automation System (BAS) interfaces. Compliance, Safety & Documentation • Recover, evacuate, and charge refrigerants in strict compliance with EPA regulations and environmental standards., • Maintain clear, accurate service logs, work orders, and safety records for every site visit., • Adhere to all OSHA safety protocols, lock-out/tag-out (LOTO) procedures, and PPE requirements in industrial environments. Qualifications & Requirements • Certifications:, • Universal EPA Section 608 Certification (Required)., • Valid Driver’s License with a clean driving record., • Journeyman HVAC/R license or formal vocational training preferred., • Factory training/certifications from major manufacturers (Trane, Carrier, York/Johnson Controls, Daikin) a strong plus., • Experience: Minimum 3–5 years of hands-on experience working directly with commercial or industrial chiller systems., • Skills:, • Proficient in reading electrical schematics, piping diagrams, and control logic prints., • Strong working knowledge of hydronic systems, fluid mechanics, and digital control systems (BAS/PLC)., • Excellent physical stamina (ability to lift up to 50 lbs, work on ladders/rooftops, and work in mechanical rooms). Benefits & Compensation • Salary: Competitive hourly wage (commensurate with experience)., • Perks:, • Service truck / company vehicle and fuel card., • Benefits package available upon discussion, • Paid time off (PTO) and paid holidays., • Ongoing factory training and continuing education support., • Health insurance (medical, dental, vision), • 401(k) with company match

Support other engineers in groups, quality engineers, test engineers and production lab personnel on valve design so that they can become familiar with the design expectations and documentation of the unit. Our client, an industry leading manufacturer of precision metal and steel components, has an

Support other engineers in groups, quality engineers, test engineers and production lab personnel on valve design so that they can become familiar with the design expectations and documentation of the unit. Prepare detail component drawings, bill of material, test procedure, test report, OMM and per

Job Description REQUIRED LICENSE AND CERTIFICATIONS ==================================== • License Requirements: Active NJ or Compact license is required at time of submission, • Required Certifications: BLS REQUIRED EXPERIENCE & CLINICAL SKILLS ================================== • Years of Experience Required: 2.5 years, • CVOR; Hybrid Room: Circulate required, scrub preferred, • Transplant: Must have some degree of transplant experience (Cardiac, lung, and/or kidney experience highly preferred), • Cardiovascular: Valve replacement; Coronary artery bypass graft (CABG); Transcatheter aortic valve replacement (TAVR); Aortic aneurysm repair; Dissection; VATs, • Vascular: Endovascular AAA; Carotid endarterectomy; Arteriogram; Angiogram; Trans carotid artery revascularization (TCAR); AV fistula; Femoral popliteal bypass graft

Field Service Technician Needed For Leading Manufacturer This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume.Salary: $25 - $40 per hour A bit about us: My client is a leading manufacturer and as they grow are in the

Description Build your future with a small, family-owned machine shop in Kenilworth, NJ where precision manufacturing meets hands-on problem-solving on real production and prototype work.In this CNC Machine Programmer/Operator opportunity, you’ll program, set up, and optimize milling and turning o

Beverage Manufacturing Plant Mechanic - Irvington, NJ Maintenance Technician Mechanic Electrician Beverage Bottling Water Filtering Mixers Blenders Carbonators Automated Bottle Fillers Cappers Labelers Boxers PLCs HMIs Motors Rotary & Linear Motion Componenets Hydraulics Pneumatics _.Seeking Plant M

Industrial Maintenance Technician Join a leading food manufacturing operation where your maintenance expertise will directly support equipment reliability, production uptime, food safety, and quality goals.This is an opportunity to work across a diverse facility environment while supporting mechanic

People want to work at Capstone because of our high-performance culture.We build strong relationships, challenge the status quo, work hard to deliver results, and pay it forward in our communities.Through transparency and open lines of communication, we do the right thing and deliver on our promises

Seasonal Warehouse Worker UPS Quick Apply Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes! The steps are simple: 1) Provide some basic information to start the application process.Watch a short video to see what the job is like

People want to work at Capstone because of our high-performance culture.We build strong relationships, challenge the status quo, work hard to deliver results, and pay it forward in our communities.Through transparency and open lines of communication, we do the right thing and deliver on our promises

Apply fast, check the full description by scrolling below to find out the full requirements for this role.Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a

Avenel, NJ Pay: $33-38/HR Shift: 5am - 1:30pm Tuesday - Saturday Maintenance Technician Lead JOB SUMMARY: A Capstone Logistics Technician is responsible for maintaining, troubleshooting, repairing, and installing equipment and facility systems to ensure safe and efficient operations.In a environment

This is a great company and role for the right candidate.A Family-Owned, extremely stable, and fast-growing company is looking for an experienced commercial Warehouse Associate with experience working in the plumbing industry.This company is looking to interview and hire immediately.If you have work

Ballard's Customer Care team is recruiting for Field Service Technicians to support customers across the Northeastern United States.The Field Service Technician is responsible for the repair, refurbishment, testing, and maintenance of fuel cell modules and components for Ballard's customers.This rol

Apply fast, check the full description by scrolling below to find out the full requirements for this role.Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a

Apply fast, check the full description by scrolling below to find out the full requirements for this role.Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a

Responsibilities: Loading and unloading of goods; Selecting and palletizing inventory; Auditing and repacking; Sorting and housekeeping; Duties as assigned by site leadership.

OnTrac - 50 Hartz Way - Responsibilities: Unload trailers and sort packages by ZIP codes; Load trucks for deliveries; Be a team player and assist other team members; Maintain safety and cleanliness standards.

Responsibilities: Move customer orders safely and quickly; Lift up to 75 lbs solo; team-lift up to 150 lbs; Use handheld scanners/tablets to process and update orders; Inspect, assemble and prep large products; Stand, bend and lift throughout shift.

Apply fast, check the full description by scrolling below to find out the full requirements for this role.Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a

Responsibilities: Cross-train across multiple fulfillment functions; Load/unload and move furniture and inventory; Use scanners and warehouse software to track inventory; Perform quality control and prep after receiving; Maintain clean, safe work area (5S) and follow safety procedures.

Abacus Corporation - - Responsibilities: Receive and process incoming stock and materials, ensuring accurate documentation and organization; Pick and fill orders from stock, adhering to customer specifications and company standards; Pack and ship orders efficiently, maintaining product integrity; M

Apply fast, check the full description by scrolling below to find out the full requirements for this role.Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a

Home Depot - - Responsibilities: Load and unload trucks within the facility; Move material within the facility using hand trucks, forklifts, or other equipment; Sort, staging, and transport products as required; Operate forklifts or other machinery to complete tasks; Assist with general warehouse d

Apply fast, check the full description by scrolling below to find out the full requirements for this role.Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a

Apply fast, check the full description by scrolling below to find out the full requirements for this role.Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a

Responsibilities: Load and unload furniture safely; Use scanners and inventory software; Perform quality control and labeling; Operate MHE when certified; Maintain safe, organized workspace.

Apply fast, check the full description by scrolling below to find out the full requirements for this role.Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a

Apply fast, check the full description by scrolling below to find out the full requirements for this role.Applying for this role online is quick and easy – and you could even schedule your first day of work within 10 minutes!.Provide some basic information to start the application process.Watch a

Aerotek - - Responsibilities: Assemble electrical and mechanical components from drawings and schematics; Wire electrical circuits and mechanical assembly; Use hand and power tools; Follow production schedules and quality standards; Troubleshoot basic assembly issues.