Trabajos valve en Passaic, New JerseyCrear alertas

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Operates and maintains the water distribution system. Supports the installation, inspection, maintenance, repair, and replacement of water mains, service connections, hydrants, valves, meters, and related distribution components. Responds to customer service requests, performs water meter readings and changes, and provides occasional support to Veolia operations and other locations as needed. Primary Duties/Responsibilities: • Assist with the installation, replacement, repair, and maintenance of water mains, service connections, fire hydrants, valves, meters, and related appurtenances., • Operate, monitor, and maintain water distribution facilities, systems, and related equipment., • Perform leak inspections on water mains and service connections and assist with leak detection, investigation, and repair activities., • Conduct utility mark-outs in accordance with applicable procedures and regulatory requirements., • Respond promptly and professionally to alarms, emergency call-outs, customer complaints, and service requests, including meter readings, meter changes, high-bill investigations, low-pressure concerns, discolored water, and other distribution-related issues., • Collect water samples for process-control and regulatory compliance monitoring in accordance with established procedures., • Perform routine preventive maintenance, inspections, troubleshooting, repairs, and housekeeping for facilities, vehicles, tools, and equipment., • Maintain the cleanliness, appearance, security, and general condition of facilities and company vehicles under Veolia’s responsibility., • Properly operate, clean, inspect, and maintain utility tools, vehicles, and equipment, including tapping machines, portable ditch pumps, generators, pipe- and leak-detection equipment, jackhammers, backhoes, and related equipment., • Assist with excavation, trenching, shoring, backfilling, compaction, pipe installation, hydrant work, valve operations, and restoration activities, as required., • Assist with water main shutdowns, isolations, flushing, pressure checks, disinfection, and returning repaired or newly installed facilities to service., • Perform hydrant inspections, flushing, repairs, and maintenance, including documenting deficiencies and reporting conditions requiring follow-up., • Assist with meter installation, testing, maintenance, replacement, and related service-line work., • Read, record, and maintain accurate meter, inspection, maintenance, sampling, repair, and service documentation., • Complete work orders, service reports, inspection forms, equipment logs, and other required records accurately and in a timely manner., • Identify and report abnormal operating conditions, damaged infrastructure, safety hazards, equipment problems, leaks, and other conditions requiring corrective action., • Maintain an appropriate inventory of tools, materials, parts, and supplies; report shortages and assist with loading, unloading, and securing materials., • Coordinate with supervisors, contractors, customers, public agencies, and other personnel as necessary to complete assigned work safely and efficiently., • Follow applicable traffic-control, excavation, confined-space, lockout/tagout, personal protective equipment, and other safe-work requirements., • Participate in emergency standby and scheduled on-call rotations as directed by management., • Comply with all company safety policies, procedures, programs, environmental standards, and applicable regulatory requirements., • Provide backup support to other New Jersey projects as needed., • Perform special projects and other related duties as assigned by management. Work Environment: • Work is performed in operational environments, both indoors and outdoors, with exposure to noise, machinery, varying temperatures, inclement weather, and other adverse conditions for extended periods., • May occasionally be required to enter and work in confined spaces.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • 3+ years of experience with water distribution operations, sampling and valve operation required. Knowledge/Skills/Abilities: • Ability to read, write, communicate effectively in English, and perform basic mathematics, measurements, and unit conversions., • Ability to read, interpret, and accurately record information from meters, gauges, control panels, computer systems, work orders, and technical documents., • Mechanical aptitude and ability to operate, inspect, troubleshoot, and maintain water distribution equipment and tools while recognizing abnormal conditions and safety hazards., • Ability to follow procedures, complete required documentation, use basic computer systems, respond to emergencies, and work effectively with others. Required Certification/Licenses/Training: • NJ License Class W1 preferred., • Valid New Jersey driver’s license required, CDL Class B preferred. Physical Requirements: • Ability to stand and walk for extended periods, including walking up to approximately five miles per shift; frequent use of hands for handling, grasping, and fine motor tasks., • Ability to climb stairs and ladders; work on catwalks, platforms, and elevated structures up to 50 feet; and work in various positions, including standing, bending, stooping, kneeling, squatting, and reaching overhead or in front of the body., • Ability to use hand tools weighing up to 15 pounds with arms extended for periods of up to 40 minutes., • Ability to lift and carry up to 50 pounds regularly and occasionally up to 60 pounds for distances of approximately 10 feet., • Requires close visual and auditory attention to identify equipment malfunctions, abnormal conditions, and safety hazards. Additional Information Pay Range: $25.00 to $28.00 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – 15 days Eligible for up to 3% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Qualifications: Mechanic I - Water/Wastewater Treatment Facility Here's What You'll Need: One year of experience in the maintenance of wastewater treatment plants and related equipment, or similar maintenance experience A valid Certified Maintenance & Reliability Technician (CMRT) certification or ability to obtain within 3 years of date of hire Proficiency in the use of Computerized Maintenance Management Systems (CMMS) A valid drivers license with no major infractions Welding experience required Ideally, Youll Also Have: Forklift experience Experience in serving municipal utility client Safe work practices Responsibilities: At , we challenge what is currently accepted, so we can shape innovative and lasting solutions for tomorrow. Through the delivery of our operations and maintenance services, youll make it simpler and more seamless for our municipal clients to operate safely and efficiently, empowering communities to focus on what matters most to them people. As a Mechanic, youll join a collaborative team ensuring that our clients can deliver their services uninterrupted. Based in Hoboken, New Jersey, youll have the opportunity to perform a variety of tasks in the preventive and corrective maintenance on water/wastewater treatment plants and related facilities equipment on an assigned shift. Youll contribute to the success of our program with efficient preventive maintenance and effective solutions to challenges that may arise in municipal facilities. Youll perform preventive and corrective maintenance on buildings, structures, grounds, machinery and equipment; lubricate equipment and check for malfunctions; replace packing in pumps or valves; replace bearings in motors, pumps, and other equipment; tune engines, set valve clearance, clean, and adjust regulators; examine equipment failures to identify cause and to prevent recurrences; and install and sets up new equipment. Youll also clean and paint interior and exterior equipment and buildings; lean out pipes and perform other plumbing and pipe fitting tasks as required; use gas and/or arc welding equipment to heat, cut, braze, or weld; perform duties of painter in their absence; assist in keeping maintenance records; and perform other duties as required. Most importantly, youlltake actionto ensure the safety, health and well-being of you and your team. Working Conditions & Physical Requirements: Safety is a core value at . We are committed to providing a safe and healthy workplace for all employees. This position will spend a substantial amount of time performing safety sensitive labor or services. Comments/Special Instructions Candidate will work for at the North Hudson Sewerage Authority which includes 2 wastewater treatment plants and pump stations. Work schedule: Monday through Friday 630 AM to 3 PM (0.5 Lunch and 2 15 mins breaks); once trained will be required to be on the on call rotating schedule for call outs.

Job Description Qualifications: Here's What You'll Need: Four years of experience as an electrical/mechanical technician Proficiency in the use of Computerized Maintenance Management Systems (CMMS) Welding experience A valid drivers license with no major infractions Ideally, Youll Also Have: Experience working with municipal utility client A valid Certified Maintenance & Reliability Technician (CMRT) certification or ability to obtain within 3 years of date of hire Forklift experience Safe work practices At , we challenge what is currently accepted, so we can shape innovativeandlasting solutions for tomorrow.Through the delivery of our operations and maintenance services,youll make it simpler and more seamless for our municipal clients to operate safely and efficiently, empoweringcommunities to focus on what matters most to them people. As a Mechanic, youll join a collaborative team ensuring that our clients can deliver their services uninterrupted. Based in Hoboken, New Jersey at the North Hudson Sewerage Authority, youll have the opportunity to perform a variety of tasks in the preventive and corrective maintenance on water/wastewater treatment plants and related facilities equipment on an assigned shift. Youll contribute to the success of our program with efficient preventive maintenance and effective solutions to challenges that may arise in municipal facilities. Youll perform preventive and corrective maintenance on buildings, structures, grounds, machinery and equipment; lubricate equipment and check for malfunctions; replace packing in pumps or valves; replace bearings in motors, pumps, and other equipment; tune engines, set valve clearance, clean, and adjust regulators; examine equipment failures to identify cause and to prevent recurrences; and install and sets up new equipment. Youll also clean and paint interior and exterior equipment and buildings; lean out pipes and perform other plumbing and pipe fitting tasks as required; use gas and/or arc welding equipment to heat, cut, braze, or weld; perform duties of painter in their absence; assist in keeping maintenance records; and perform other duties as required. Most importantly, youlltake actionto ensure the safety, health and well-being of you and your team. Based in North Hudson Sewerage Authority, youll have the opportunity to perform a variety of tasks in the preventive and corrective maintenance on water/wastewater treatment plants and related facilities equipment on an assigned shift. Youll contribute to the success of our program with efficient preventive maintenance and effective solutions to challenges that may arise in municipal facilities. Youll perform preventive and corrective maintenance on buildings, structures, grounds, machinery and equipment; lubricate equipment and check for malfunctions; replace packing in pumps or valves; replace bearings in motors, pumps, and other equipment; tune engines, set valve clearance, clean, and adjust regulators; examine equipment failures to identify cause and to prevent recurrences; and install and sets up new equipment. Youll also clean and paint interior and exterior equipment and buildings; lean out pipes and perform other plumbing and pipe fitting tasks as required; use gas and/or arc welding equipment to heat, cut, braze, or weld; perform duties of painter in their absence; assist in keeping maintenance records; and perform other duties as required. Most importantly, youlltake actionto ensure the safety, health and well-being of you and your team. Working Conditions & Physical Requirements: Safety is a core value at . We are committed to providing a safe and healthy workplace for all employees. This position will spend a substantial amount of time performing safety sensitive labor or services. Comments/Special Instructions Candidate will work 630am to 3pm Monday through Friday, after done with training will be required to go on the on call rotation schedule- 1 week Friday to Friday. Welding experience required

VERSA Products Company is a leading manufacturer of pneumatic directional control valves and valve automation solutions serving industrial, OEM, process control, and hazardous location markets worldwide. For over 75 years, VERSA has built its reputation on engineering excellence, innovation, quality, and customer satisfaction. Position Summary This position is ideal for a hands on Electrical and/or Mechanical Engineer responsible for the design, development, testing, and continuous improvement of mechanical and electro-mechanical products for the fluid power and valve automation industry. This role leads engineering projects, prepares technical documentation, collaborates with manufacturing and suppliers, and supports product certification and regulatory compliance. Essential Responsibilities • Drive continuous improvement initiatives for existing product lines to improve performance, manufacturability, reliability, and cost., • Develop engineering concepts, perform technical analyses, prepare test plans, conduct laboratory testing, and document results., • Design complex electro-mechanical and mechanical assemblies using 3D CAD software., • Create, review, and release engineering documentation including:, • 3D models, • Detailed manufacturing drawings, • Bills of Materials (BOMs), • Engineering Change Notices (ECNs), • Test reports, • Technical specifications, • Utilize engineering simulation software to evaluate and optimize product designs., • Collaborate with Manufacturing, Quality, Purchasing, and suppliers to ensure successful product launches and resolve technical issues., • Review supplier components and approve production samples., • Support Manufacturing by troubleshooting technical production issues and implementing engineering solutions., • Manage engineering projects from concept through production while meeting schedule, quality, and cost objectives., • Perform other engineering duties as assigned. Qualifications Required • Bachelor’s Degree in Electrical and/or Mechanical Engineering or related engineering discipline., • Minimum of six (6) years of product design experience in a manufacturing environment., • Minimum of two (2) years of hands-on 3D CAD design experience., • Experience creating mechanical assemblies, detailed drawings, and engineering documentation., • Proficiency with Microsoft Office applications. Preferred • Experience with pneumatic products, valves, fluid power, or industrial automation., • Experience with engineering simulation software such as EFD Flow, Maxwell, or similar analysis tools., • Familiarity with product testing, validation, and regulatory compliance., • Experience supporting ISO 9001 Quality Management Systems., • Project management experience leading engineering projects from concept to production. Knowledge, Skills & Abilities • Strong mechanical aptitude and analytical problem-solving skills., • Ability to manage multiple engineering projects simultaneously., • Excellent written and verbal communication skills., • Ability to work effectively with cross-functional teams., • Strong organizational and documentation skills., • Self-motivated with a continuous improvement mindset., • Ability to work independently while contributing to a collaborative engineering team. Benefits • Medical, dental, and vision coverage, • 401(k) retirement program, • Paid time off, • Tuition reimbursement, • Training and professional-development opportunities There is a reason many people join VERSA and stay for decades! We are a family-oriented organization with opportunities to grow.

Job Description Responsibilities will include proper operation of equipment, component level & final cleaning of assemblies. Some assembly work will take place when required. Following is a summary of the essential functions for this job. Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time. Trained to perform cleaning, cleanliness verification, and packaging per: • S308, • S311-4 / -5 / -6 / -8, • Approved Valve-specific Engineering drawing and:, • Cleaning Procedures (CPs), • Test Procedures (TPs), • Test Reports (TRs), • Qualification Procedures (QPs), • Others as required Performs: • Pre-cleaning / bulk cleaning using pre-cleaning equipment and established methods, • Gowning / de-gowning for an ISO Class 5 cleanroom, • Precision cleaning of piece parts, kits, and assemblies, • Cleanliness verification for contamination (FOD), damage, and defects utilizing:, • Evident CIX100 Particle Counting Microscopes, • White light visual verification, • Ultraviolet visual verification, • Total Solids Analysis, • Non-volatile Residue Analysis, • Manual microscopes and video scopes, • Packaging cleaned hardware per process or hardware-specific instructions, • Maintenance checklists to monitor and maintain, • Clean environment and equipment, • Stocks of consumables (solvents, bagging plastic, gowning items, etc.), • Functional testing of electrical and pneumatic valve systems as required, • Training of new technicians and providing feedback to engineering teams for continuous improvement of documents, procedures, tooling, and methods. Salary Range:$27.00 To $35.00 Hourly Valcor Engineering Corporation is looking for individuals who are highly skilled, diligent, practical, productive, reliable, inventive, self-motivated, patient, conscientious, problem solvers, organized, cooperative, flexible and positive. Character and attitude are extremely important. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Responsibilities will include proper operation of equipment, component level & final cleaning of assemblies. Some assembly work will take place when required. Following is a summary of the essential functions for this job. Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time. Trained to perform cleaning, cleanliness verification, and packaging per: • S308, • S311-4 / -5 / -6 / -8, • Approved Valve-specific Engineering drawing and:, • Cleaning Procedures (CPs), • Test Procedures (TPs), • Test Reports (TRs), • Qualification Procedures (QPs), • Others as required Performs: • Pre-cleaning / bulk cleaning using pre-cleaning equipment and established methods, • Gowning / de-gowning for an ISO Class 5 cleanroom, • Precision cleaning of piece parts, kits, and assemblies, • Cleanliness verification for contamination (FOD), damage, and defects utilizing:, • Evident CIX100 Particle Counting Microscopes, • White light visual verification, • Ultraviolet visual verification, • Total Solids Analysis, • Non-volatile Residue Analysis, • Manual microscopes and video scopes, • Packaging cleaned hardware per process or hardware-specific instructions, • Maintenance checklists to monitor and maintain, • Clean environment and equipment, • Stocks of consumables (solvents, bagging plastic, gowning items, etc.), • Functional testing of electrical and pneumatic valve systems as required, • Training of new technicians and providing feedback to engineering teams for continuous improvement of documents, procedures, tooling, and methods. Salary Range:$22.00 To $30.00 Hourly Valcor Engineering Corporation is looking for individuals who are highly skilled, diligent, practical, productive, reliable, inventive, self-motivated, patient, conscientious, problem solvers, organized, cooperative, flexible and positive. Character and attitude are extremely important. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Job Overview We are seeking an experienced Industrial Maintenance Mechanic II to perform preventive and corrective maintenance on equipment, machinery, buildings, and related facilities at a water and wastewater treatment operation. The ideal candidate will have at least four years of electrical and mechanical maintenance experience, hands-on welding skills, and familiarity with computerized maintenance management systems (CMMS). This role involves troubleshooting equipment failures, repairing pumps and motors, performing plumbing and pipe-fitting work, and maintaining safe and reliable facility operations. Key Responsibilities • Perform preventive and corrective maintenance on machinery, equipment, buildings, structures, and grounds., • Inspect, lubricate, and maintain mechanical equipment to identify malfunctions and prevent unexpected breakdowns., • Repair pumps, valves, motors, and other equipment, including replacing pump or valve packing and worn bearings., • Diagnose equipment failures, determine root causes, and implement corrective actions to prevent recurring problems., • Install, assemble, adjust, and set up new equipment., • Tune engines, set valve clearances, and clean and adjust regulators as required., • Perform welding, cutting, brazing, and heating operations using gas and/or arc welding equipment., • Complete plumbing and pipe-fitting tasks, including cleaning and clearing pipes as needed., • Clean and paint interior and exterior equipment, buildings, and facility areas., • Maintain accurate maintenance records and update work orders using a computerized maintenance management system (CMMS)., • Follow established maintenance procedures and safe work practices when working with machinery, tools, and facility equipment., • Support daily facility operations and collaborate with team members to resolve maintenance issues., • Perform painting-related duties when required and complete other maintenance assignments as directed., • Participate in the on-call rotation after completing training. Required Qualifications • At least 4 years of experience as an electrical/mechanical technician or in a comparable maintenance role., • Hands-on welding experience, including the use of gas and/or arc welding equipment., • Proficiency in using computerized maintenance management systems (CMMS)., • Practical knowledge of mechanical and electrical maintenance, equipment troubleshooting, and preventive maintenance., • Experience repairing pumps, valves, motors, bearings, and related industrial equipment., • Valid driver's license with no major driving infractions., • Strong commitment to workplace safety, equipment reliability, and teamwork., • Ability to work the scheduled shift and participate in the required on-call rotation. Preferred Qualifications • Experience supporting municipal utilities or water/wastewater treatment facilities., • Certified Maintenance & Reliability Technician (CMRT) certification, or the ability to obtain it within three years of hire., • Forklift operating experience., • Familiarity with plumbing, pipe fitting, industrial welding, and facility maintenance procedures. Work Environment & Safety • Work at a water/wastewater treatment facility in a safety-sensitive maintenance environment., • Perform hands-on maintenance involving machinery, tools, welding equipment, and facility systems., • Follow applicable safety procedures and use required protective equipment., • Maintain a safe working environment and help protect the health and well-being of coworkers., • Be prepared to respond to maintenance needs during assigned on-call periods. Ideal Candidate A skilled industrial maintenance mechanic with strong welding, mechanical troubleshooting, and preventive maintenance experience who can work independently, maintain accurate records, and help ensure reliable operation of facility equipment.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: We are seeking a Principal Magnet Cryogenics Engineer with over 10-15 years of industry experience to lead the complete program lifecycle—from concept through commissioning—of large-scale cabled High-Temperature Superconducting (HTS) magnet systems for next-generation fusion reactors. In this role, you will hold end-to-end technical ownership for the cryogenic design, thermal-hydraulic modelling, forced-flow cooling distribution, and cryogenic integration of large-scale CICC (Cable-in-Conduit Conductor) or advanced stacked-tape HTS magnets. You will bridge megawatt scale cryogenic plant engineering with microscopic thermal-hydraulic magnet behaviour, leading multi-disciplinary teams through multi-million-dollar hardware deliverables. Key Responsibilities: • Program Lifecycle Ownership: Lead the complete lifecycle (Conceptual, Preliminary, Detailed Design, Qualification, Fabrication, Assembly, Commissioning, and Decommissioning) for large-scale HTS fusion magnet cryogenic systems., • Cryo-Thermal System Architecture: Design, model, and validategaseous helium (gHe), or sub-cooled liquid nitrogen (sLN2) thermal management systems tailored to high-field HTS cabled conductors (stacked HTS conductors)., • Thermal-Hydraulic Modeling: Perform dynamic thermal-hydraulic analysis, transient load modelling (nuclear heating, AC losses, eddy currents, ramp rates), and margin calculations under operational and fault conditions., • Quench & Fault Management: Own the cryogenic response strategy during quench events, including rapid helium expansion, overpressure relief sizing, burst disc integration, and thermo-mechanical stress containment., • Large-Scale Infrastructure & Plant Integration: Define requirements for mega-watt class cryogenic plants, cold compressors, heat exchangers, sub-coolers, helium distribution boxes (valve boxes), and low-heat-leak transfer lines., • Joints & Current Leads: Oversee cryogenic thermal management for high-current demountable or permanent HTS joints and conduction-cooled hybrid (HTS/LTS) gas-cooled current leads (60+ kA)., • Vendor & Subcontractor Governance: Manage major sub-contracts for large-scale cryogenic infrastructure, conductor fabrication, pressure vessels, and vacuum insulated systems (cryostats)., • V&V and Commissioning: Plan and execute full-scale cryogenic and high-current magnet test campaigns, leading cool-down, steady-state operation, quench mitigation, and warm-up procedures.Required Experience:, • 10-15+ Years of Direct Experience in cryogenic engineering and thermal-hydraulic design for superconducting magnet systems, with a primary focus on HTS tape/cable architectures (REBCO/BSCCO)., • Large-Scale Fusion/Physics Program Delivery: Proven track record of ownership over large-scale (> $10M+) magnet work packages within fusion energy programs (e.g., W7x, ITER, JT60SA, KSTAR, DEMO) or major scientific facilities (e.g., CERN, FERMILAB)., • Cabled HTS Architecture: Demonstrated expertise in high-current (tens of kA) cabled HTS configurations (e.g., Cable-in-Conduit Conductors, stacked tape conductors) and forced-flow cooling strategies., • Full Lifecycle Track Record: Experience taking at least one major superconducting magnet or cryogenic system from initial concept through initial cool-down and operational validation., • Regulatory & Code Compliance: Deep familiarity with pressure vessel standards applied to cryogenic temperatures (ASME BPVC Section VIII, EN 13445, B31.3) and cryogenic safety standards (ISO 21010/CGA).Technical Knowledge, • HTS Material Physics: Solid understanding of critical surfaces for REBCO coated conductors, strain sensitivity, thermal margin assessment, and current sharing regimes., • Cryogenic Fluids & Thermophysical Properties: Mastery of low-temperature fluid dynamics (gHe, sLN2) using database tools., • Transient Thermal Analysis: Deep domain knowledge of AC losses (coupling, hysteresis, flux creep) nuclear volumetric heating, heat-leak budgets, and conduction/radiation thermal shielding (MLI design)., • Instrumentation & Controls: Extensive knowledge of low-temperature thermometry (Cernox, TVO, optical fibers/FBG), cryogenic flow meters, pressure transducers, and cryogenic valve telemetry.Skills & Competencies, • Computational Tools: Proficiency in finite element analysis (FEA) and thermal-hydraulic system modeling tools (e.g., COMSOL Multiphysics, ANSYS Thermal/CFD, MATLAB/Simulink)., • System Engineering & Requirements Flowdown: Capability to write clear system requirement documents (SRDs), interface control documents (ICDs), and lead major design reviews (CoDR, PDR, CDR)., • Leadership & Team Mentorship: Demonstrated ability to lead cross-functional engineering teams (structural, electrical, vacuum, systems) and mentor junior magnet/cryogenic engineers., • Strategic Risk Mitigation: Mastery of FMEA, applied to cryogenic system failures, vacuum loss (loss of vacuum/L VAC), and runaway quench scenarios.Company Benefits:, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job Title: Commercial / Industrial Chiller Technician Location: Lakewood, NJ Position Type: Full-Time Reports To: Service Manager / Operations Director Job Overview We are seeking an experienced and certified Chiller Technician to join our HVAC/R service team. In this role, you will be responsible for installing, inspecting, maintaining, troubleshooting, and repairing large-scale commercial and industrial chiller systems (centrifugal, screw, scroll, and reciprocating). The ideal candidate has deep technical knowledge of thermodynamics, electrical controls, and refrigerant safety, along with a strong commitment to preventative maintenance and client satisfaction. Key Responsibilities Maintenance & Inspection • Perform routine preventative maintenance on air-cooled and water-cooled chillers, cooling towers, pumps, and auxiliary equipment., • Inspect electrical wiring, motor starters, compressors, heat exchangers, and safety controls to ensure peak operating efficiency., • Monitor oil levels, oil pressure, fluid levels, and refrigerant charges; perform tube brushing and oil/filter changes as required. Diagnostics & Repair • Diagnose complex mechanical, electrical, and refrigeration faults using electronic meters, pressure gauges, and diagnostic software., • Perform major component overhauls and repairs, including compressor rebuilds/replacements, valve replacements, and leak repairs., • Troubleshoot low-voltage and high-voltage control circuits, variable frequency drives (VFDs), and Building Automation System (BAS) interfaces. Compliance, Safety & Documentation • Recover, evacuate, and charge refrigerants in strict compliance with EPA regulations and environmental standards., • Maintain clear, accurate service logs, work orders, and safety records for every site visit., • Adhere to all OSHA safety protocols, lock-out/tag-out (LOTO) procedures, and PPE requirements in industrial environments. Qualifications & Requirements • Certifications:, • Universal EPA Section 608 Certification (Required)., • Valid Driver’s License with a clean driving record., • Journeyman HVAC/R license or formal vocational training preferred., • Factory training/certifications from major manufacturers (Trane, Carrier, York/Johnson Controls, Daikin) a strong plus., • Experience: Minimum 3–5 years of hands-on experience working directly with commercial or industrial chiller systems., • Skills:, • Proficient in reading electrical schematics, piping diagrams, and control logic prints., • Strong working knowledge of hydronic systems, fluid mechanics, and digital control systems (BAS/PLC)., • Excellent physical stamina (ability to lift up to 50 lbs, work on ladders/rooftops, and work in mechanical rooms). Benefits & Compensation • Salary: Competitive hourly wage (commensurate with experience)., • Perks:, • Service truck / company vehicle and fuel card., • Benefits package available upon discussion, • Paid time off (PTO) and paid holidays., • Ongoing factory training and continuing education support., • Health insurance (medical, dental, vision), • 401(k) with company match

The Business Development Manager is responsible for driving revenue growth, expanding market share, and identifying new business opportunities for our industrial valve portfolio (safety, relief and control valves). Together We Build Better infrastructure, better homes and better businesses.

Working closely with the Inside Sales Manager, Outside Sales, Engineering, Product Management, and Operations, this role provides technical and commercial support for valve automation and process control applications while contributing to our industry-leading customer service and shaping departmenta

Job Description REQUIRED LICENSE AND CERTIFICATIONS ==================================== • License Requirements: Active NJ or Compact license is required at time of submission, • Required Certifications: BLS REQUIRED EXPERIENCE & CLINICAL SKILLS ================================== • Years of Experience Required: 2.5 years, • CVOR; Hybrid Room: Circulate required, scrub preferred, • Transplant: Must have some degree of transplant experience (Cardiac, lung, and/or kidney experience highly preferred), • Cardiovascular: Valve replacement; Coronary artery bypass graft (CABG); Transcatheter aortic valve replacement (TAVR); Aortic aneurysm repair; Dissection; VATs, • Vascular: Endovascular AAA; Carotid endarterectomy; Arteriogram; Angiogram; Trans carotid artery revascularization (TCAR); AV fistula; Femoral popliteal bypass graft

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE WITHIN 25-50 MILES OF THE POSTED LOCATION AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Plumbing / Fire Protection / Sprinkler Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. This is not intended as a moonlighting position for someone whose full-time employment will take priority over AEP projects. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities Typical responsibilities may include: • Develop plumbing and fire-protection designs from architectural backgrounds, project criteria, and direction from AEP, • Develop domestic cold- and hot-water distribution systems, • Develop sanitary waste and vent systems, • Develop storm-drainage systems where applicable, • Develop natural-gas distribution systems where applicable, • Perform plumbing fixture-unit, water-demand, sanitary, storm, and gas-load calculations, • Size piping and related plumbing-system components, • Design domestic water-heating systems and select equipment, • Develop plumbing riser diagrams and schematics, • Coordinate plumbing requirements for architectural, mechanical, electrical, kitchen, specialty, and other equipment, • Develop fire-protection and sprinkler-system layouts where included in the project scope, • Determine applicable sprinkler design criteria, hazard classifications, design densities, coverage requirements, and system requirements, • Develop sprinkler head layouts, piping arrangements, risers, standpipes, and related fire-protection systems as applicable, • Develop fire-protection performance criteria and coordinated design drawings for delegated-design sprinkler systems where appropriate, • Perform or assist with sprinkler hydraulic calculations where required, • Review available water-supply information and identify when additional flow-test or utility information is required, • Coordinate fire-protection systems with architectural, structural, mechanical, electrical, fire alarm, and plumbing disciplines, • Prepare plumbing and fire-protection plans, schedules, risers, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required What We Are Looking For We are looking for a designer, not simply a CAD operator. The ideal candidate can receive architectural backgrounds and project requirements, understand the design intent, determine what needs to be done, and independently develop coordinated plumbing and fire-protection designs without requiring every pipe, fixture connection, valve, sprinkler head, riser, and note to be individually marked up. Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Does not place AEP projects on the back burner because another client becomes more urgent, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing plumbing systems for buildings, • Professional experience with fire-protection and sprinkler-system design, • Strong AutoCAD skills, • Experience producing permit and construction-document drawing sets, • Knowledge of domestic water, sanitary, vent, storm, natural gas, and domestic water-heating systems, • Experience performing plumbing sizing and demand calculations, • Working knowledge of sprinkler-system design, hazard classifications, densities, sprinkler coverage requirements, piping arrangements, and hydraulic principles, • Familiarity with standpipe systems and fire-service requirements where applicable, • Ability to distinguish between engineer-of-record design requirements and delegated sprinkler-contractor design responsibilities, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred, • Working knowledge of the IBC, IPC, applicable fuel-gas codes, NFPA 13, NFPA 13R, NFPA 14, and the NYC Building and Plumbing Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret applicable code requirements when asked., • Familiarity with NYC fire-protection requirements and FDNY-related requirements is strongly preferred, • PE licensure is not required for this position Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing plumbing fixtures, piping, water services, sanitary and storm systems, gas services, sprinkler systems, standpipes, fire services, and related building conditions, • Taking field measurements, photographs, pipe-size information, equipment information, and utility information, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of plumbing design experience do you have?, • How many years of fire-protection/sprinkler design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop plumbing designs from architectural backgrounds and project criteria?, • Are you able to independently develop sprinkler layouts and fire-protection design criteria?, • Do you perform sprinkler hydraulic calculations yourself?, • How familiar are you with NFPA 13, NFPA 13R, NFPA 14, and NYC plumbing/fire-protection requirements?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation?\nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

Clow Valve - IHydrant Field Sales. This job, while a remote position, requires working collaboratively with other members of the valve and hydrant teams, including product managers, engineering, and sales to ensure overall project success.

Valve Designer in Houston, TX to create detailed valve models, assemblies, and drawings using AutoCAD and SolidWorks.

Hogsalt is seeking a Full Time .Restaurant Maintenance Technician.We are seeking a skilled and reliable technician to join our team supporting three restaurants in Manhattan.The ideal candidate will possess a diverse skill set in commercial repairs and maintenance, demonstrating a proactiv

Maintaining and troubleshooting the following types of equipment: Beverage Bottling & Packaging Equipment: • Bottle Handling -- Conveyors -- Accumulators, Sorters, Orienters & Unscramblers • Continuous Motion Inline & Rotary Bottle Fillers & Cappers -- Rinsers & Rinse Valves -- Liquid Fillers &

A precision manufacturer specializing in custom-engineered metal bellows, electroforms, and related assemblies for highly demanding applications.Serves industries such as aerospace, medical devices, and semiconductor manufacturing, with a focus on tight tolerances, reliability, and advanced fabricat

People want to work at Capstone because of our high-performance culture.We build strong relationships, challenge the status quo, work hard to deliver results, and pay it forward in our communities.Through transparency and open lines of communication, we do the right thing and deliver on our promises

THIRD-PARTY AGENCIES: PLEASE DO NOT CONTACT US REGARDING THIS POSITION.The Malwin Company is an aerospace and defense enterprise that brings together specialized engineering, manufacturing, and technology capabilities under one organization.Our teams design, develop, manufacture, and support highly

PrideStaff - - Responsibilities: Load and unload inbound and outbound freight from trucks and containers; Accurately pick, pack, label, and stage customer orders for shipment; Maintain inventory organization and keep work areas clean and hazard-free; Learn and operate warehouse equipment, including

Responsibilities: Load and unload freight; Select and sort items for processing; Audit and repack as needed; Paletize and housekeeping duties; Assist with miscellaneous duties as assigned by site leadership.

FleetPride - - Responsibilities: Unload products from shipping vehicles; Deliver and unload customer orders; Operate forklift and store inventory; Maintain vehicle and warehouse cleanliness; Complete daily vehicle inspections/logs.

PrideStaff - - Responsibilities: Sort, label, and process inbound and outbound cargo; Load and unload freight safely and efficiently; Operate forklifts, pallet jacks, and warehouse equipment; Handle basic shipping paperwork and documentation; Perform data entry in warehouse systems and maintain acc

OnTrac - 50 Hartz Way - Responsibilities: Unload trailers and sort packages by ZIP codes; Load trucks for deliveries; Be a team player and assist other team members; Maintain safety and cleanliness standards.

Cardinal Health - - Responsibilities: Follow SOPs to process orders; Accurate picking and packing; Operate RF scanner and input data; Use voice-pick system and material handling equipment; Maintain clean, safe workspace.

CMA CGM Group - - Responsibilities: Develop and provide excellent customer service to internal and external customers; Execute manual labor functions such as picking inventory and loading goods; Coordinate receipt, storage, and distribution of materials; Prepare and assemble orders and move materia

Aerotek - JobID: JP-005854546 [Production Operator / Assembly Line Worker] As a Mechanical Assembly Worker at Aerotek, you'll: Perform mechanical assembly on different electronic products; Read and interpret blueprints, and quality-check the final products; Perform other duties as assigned.

Maintenance Technician (1st Shift).If you would like to know a bit more about this opportunity, or are considering applying, then please read the following job information.We are seeking a skilled and detail-oriented Maintenance Technician / Controls Specialist to support the ongoing reliability, pe

Aerotek - - Responsibilities: Operate and monitor food production equipment; Keep equipment and work areas clean and sanitary; Report equipment issues and stop machinery when necessary; Ensure a steady supply of materials to the production line; Adjust conveyor speeds to maintain workflow.

Maintenance Technician (1st Shift).If you would like to know a bit more about this opportunity, or are considering applying, then please read the following job information.We are seeking a skilled and detail-oriented Maintenance Technician / Controls Specialist to support the ongoing reliability, pe

Aerotek - - Responsibilities: Interpret drawings and blueprints to assemble cable and wire harnesses; Crimp, wrap, strip wires to spec using standard tools; Check parts against BOM and report discrepancies; Inspect finished assemblies for quality and function; Test units and document results.

THIRD-PARTY AGENCIES: PLEASE DO NOT CONTACT US REGARDING THIS POSITION.Ready to make your application Please do read through the description at least once before clicking on Apply.The Malwin Company is an aerospace and defense enterprise that brings together specialized engineering, manufacturing, a

Onsite Monday-Friday, likely 7:30 AM-3:30 PM.If you are considering sending an application, make sure to hit the apply button below after reading through the entire description.We are seeking a hands-on Maintenance Technician to support day-to-day facilities operations within a professional commerci

Aerotek - - Responsibilities: Conduct electrical testing and wiring of panels; Read and interpret schematics and blueprints; Run and manage electrical panels; Troubleshoot electrical issues; Perform manual testing of equipment.

Onsite Monday-Friday, likely 7:30 AM-3:30 PM.If you are considering sending an application, make sure to hit the apply button below after reading through the entire description.We are seeking a hands-on Maintenance Technician to support day-to-day facilities operations within a professional commerci

Aerotek - - Responsibilities: Assemble electrical and mechanical components from drawings and schematics; Wire electrical circuits and mechanical assembly; Use hand and power tools; Follow production schedules and quality standards; Troubleshoot basic assembly issues.

FedEx - - Responsibilities: Process and produce digital and signs & graphics print/finish orders; Operate printers, binding and auxiliary equipment; Set up, operate and perform routine maintenance on equipment; Maintain equipment and supplies, cleaning and repairs; Follow LEAN and 5S standards to en

Aerotek - - Responsibilities: Operate and monitor food production equipment; Keep equipment and work areas clean and sanitary; Report equipment issues and stop machinery when necessary; Adjust conveyor speeds to maintain workflow; Perform basic preventative maintenance.

Owens Corning - - Responsibilities: Support safety initiatives and TPM processes to maintain zero losses and zero defects; Perform laminator quality checks and Layered Process Audits; Monitor and report material quality issues and off-spec products; Assist in machine maintenance, housekeeping, and

Onsite Monday-Friday, likely 7:30 AM-3:30 PM.If you are considering sending an application, make sure to hit the apply button below after reading through the entire description.We are seeking a hands-on Maintenance Technician to support day-to-day facilities operations within a professional commerci