Trabajos assembly line en BoltonCrear alertas

PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to both be eligible for SC (Secret Level) UK Security Clearance AND have an apprenticeship. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting for time served Electrical Fitters on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester. This is a contract role although highly likely to be long-term. Rates: £28.35 per hour Umbrella or £21.12 per hour (holiday pay on top of hourly rate) rates rise after 12 weeks to £29.70 per hour Umbrella or £22.12 per hour PAYE Monday - Friday 37 hours + The role will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives This role will now include an accommodation expense if the candidate is travelling from more than 30 miles away from BL5 postcode. This will need to be receipted and will be up to £400 per week (only for accommodation) Specific responsibilities include: • Certify the product in line with Product Certification procedure, • Demonstrated ability / willingness to certify own work in line with company quality standards, • Maintain product certification and approval via regular audits, • Possess a versatile skill base with the capability to apply these skills across a range of tasks, • Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build, inspection and where relevant test times are met., • Check and complete all paperwork associated with the manufacturing data pack, • Maintain to the highest level, workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process, • Maintain a safe working environment, • Maintain a good housekeeping policy Essential: • Engineering/ craft apprenticeship ESSENTIAL, • Possess experience in electrical wiring and assembly, • IPC 610 certified/ trained preferred, • Previous experience in the aerospace or defence industry would be desirable, • Manual handling training, • Lifting and slinging (including overhead cranes) training, • ESD training

World Class Defence Organisation based in Bolton is currently looking to recruit a Goods Inwards Inspector Subcontractor on an initial 12 month contract. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: £28.35ph rising to £29.70ph after 12 weeks (Umbrella). Overtime: hours worked over 37 hours per week is paid at time and a half. Goods Inwards Inspector Job Description: • The role of the Goods Inwards Inspector is to ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects., • Verify and accept procured product in line with contractual conditions., • Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined., • Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections., • Produce relevant inspection/quality control documentation., • Check and complete all paperwork associated with the delivered article., • Ensure inspections times are met., • Control defect items via segregation from good product. Raise and maintain relevant defect reports., • Maintain product verification approval process via regular audits. Inspection of PCB, • Ensure compliance with all associated procedures applicable to the manufacturing process., • Maintain to the highest level, workmanship standards and product quality., • Contribute to the maintenance of an orderly and safe working environment.Skillset/experience required:, • The successful candidate should be a team player who is able to demonstrate customer focus. They should be adaptable to any work-related processes and working practices., • Goods Inwards Inspection / Quality Inspection background, • Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. Formal further education certificate to HNC or equivalent certificate., • SAP literate is desirable.

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Inspector Subcontractor on an initial 12 month contract. Experience with inspecting the work of other people is essential.Job Title: Electrical InspectorRate: £28.35 rising to £29.70 after 12 weeksLocation: BoltonHybrid / Remote working: Onsite. Standard Days, not shift workContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week are paid at ‘time and a half’Duration: 12 Months (initially and then ongoing and long-term thereafter)IR35 status: Inside IR35 (Umbrella)Electrical Inspector Job Description: • Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware., • Certification of product in line with processes and procedures., • Examining for correct assembly including verifying all forms of electrical connections., • Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc., • Inspect for physical damage., • Intermediate inspection checks for non-Product Certification activities., • Monitoring of operators within the Product Certification Scheme., • Check, complete and certify all paperwork associated with the manufacturing data pack., • Control of non-conforming items., • Raise and maintain relevant data records/non-conformance reports., • Produce relevant inspection/quality control documentation/history sheets., • Care for and use specialised inspection tools., • Maintain product certification and approval via regular audits., • Ensure compliance with all associated procedures applicable to the manufacturing process., • Ensure inspection times are met., • Possess a versatile skill base with the capability to apply these skills across a range of tasks., • Maintain to the highest level, workmanship standards and product quality., • Willing to contribute to an environment of process improvement., • Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21or HNC., • Several years, experience as a skilled person., • IPC 610 & IPC 620 certified / trained preferred. Manual handling training. ESD Training. No colour blindness.Role requirements (skills, training and qualifications)Electrical apprenticeship to one of the following levels, • Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship, • Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3, • Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3Vocational NVQ3 with Further Education, BTEC ONC/HNC

Electrical Fitter 12 month contract Based in Bolton Offering £28.35ph Inside IR35 Are you an experienced Electrical Fitter? Do you hold Electrical Engineering or similar trade certificates? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Electrical Fitter, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Certify the product in line with Product Certification procedure, • Certify own work in line with company quality standards, • Maintain product certification and approval via regular audits, • Be fully conversant with all equipment, tools, and measuring instruments associated with the manufacturing cycle, • Ensure manufacturing build, inspection, and where relevant test times are met, • Check and complete all paperwork associated with the manufacturing data pack, • Maintain workmanship standards and product quality, • Ensure compliance with all associated procedures applicable to the manufacturing process Trade Certificates: Approved Apprenticeship/Apprenticeship Framework/Modern Apprenticeship OR Vocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3 OR Vocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3 OR Vocational NVQ3 with Further Education, BTEC ONC/HNC Your skillset may include: • IPC 610 certified/ trained preferred, • Possess experience in electrical wiring and assembly, • Previous experience in the aerospace or defence industry would be desirable, • Manual handling training, • Lifting and slinging (including overhead cranes) training, • ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Our client has an opportunity for a Goods in Inspector to join them on a contract basis for 12 months. You will be ensuring the goods received from suppliers meet the criteria of the purchase order and are compliant in all respects.\n\nRole: Goods In Inspector\n Location: Bolton\n Hours: 37 per week\n Clearance: full SC required before starting\n Hourly Rate: £28.35 per hour via an umbrella company, inside IR35\n\nWhat you'll be doing:\n\nThe role of the Goods Inwards Inspector is to ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects.\nVerify and accept procured product in line with contractual conditions.\nPracticed in reading and understanding assembly drawings with due regards to dimensional tolerances and machined.\nExamining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections.\nProduce relevant inspection/quality control documentation.\nCheck and complete all paperwork associated with the delivered article.\nEnsure inspections times are met.\nControl defect items via segregation from good product. Raise and maintain relevant defect reports.\nMaintain product verification approval process via regular audits. Inspection of PCB\nEnsure compliance with all associated procedures applicable to the manufacturing process.\nMaintain to the highest level, workmanship standards and product quality.\nContribute to the maintenance of an orderly and safe working environment.\n Requirements:\n\nGoods in Inspection experience\nApproved Apprenticeship/Apprenticeship Framework/Modern ApprenticeshipOR\n\nVocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3OR\n\nVocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3OR\n\nVocational NVQ3 with Further Education, BTEC ONC/HNC\nSAP literate is desirable.\n If you are interested in applying for this position and you meet the requirements, please apply!\n\nLine Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. \n\n"Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

An opportunity has arisen with my client for an Electrical Wiring Operator to join them on a 12-month contract. As an Electrical Wiring Operator you will join the Calibration and Maintenance Team to fault diagnose and repair bespoke cabling to drawing specifications.\n\nRole: Electrical Wiring Operator \n Pay: £28.35 per hour via umbrella (rising to £29.70 per hour after 12 weeks)\n Location: Bolton\n Contract: 12 Months\n Hours: Monday - Friday, 37 hours per week\n Security Clearance: BPSS however needs to achieve Security Clerance.\n\nResponsibilities:\n\nFault finding and subsequent repair of cable assemblies.\nCarry out surface mount repair on CCAs.\nMaintain and repair test/measuring equipment to component level.\nPAT testing across the manufacturing site.\nInterrogate drawings during fault finding activities.\nSafety systems testing of Test & Measuring equipment in line with documented procedures.\nProvide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract.\nMaintain excellent workspace husbandry disciplines.\nMaintain a high degree of tool control and FOD practices.\nAssist with maintenance of manufacturing aids as and when required.Skills/Experince\n\nAll three of the below are required:\nElectrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard)\nElectrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.)\nElectrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved\nIPC 620 & Dynamic Cabling certified/ trained preferred.\nPossess experience in electrical wiring and assembly.\nPrevious experience in the aerospace or defence industry would be desirable.Please send your updated CV to: Natalie Dalkin at Line Up Aviation\n Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. \n "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Electrical Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDo you have experience as an Electrical Inspector?\n\nDo you hold Electrical/Electronics trade qualifications?\n\nDo you want to work with an industry-leading company?\n\nIf your answers are yes to these, then this could be the role for you!\n\nAs the Electrical Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry!\n\nYou will be involved in:\n\nResponsible for all elements necessary to achieve and maintain the quality of deliverable hardware\nCertification of product in line with processes and procedures\nExamining for correct assembly including verifying all forms of electrical connections\nExamining the finish of all parts\nInspect for physical damage\nInspection checks for non-product certification activities\nRaise and maintain relevant data records/non-conformance reports\nProduce relevant inspection/quality control documentation/history sheets\nMaintain product certification and approval via regular audits\nEnsure compliance with all associated procedures applicable to the manufacturing process \n\nYour skillest may include:\n\nMaintain a safe working environment\nMaintain a good housekeeping policy\nFormal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC\nExperience as a skilled person.\nIPC 610 & IPC 620 certified/trained\nManual handling training\nESD Training \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nElectrical Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

An opportunity has arisen with my client for an Electrical Fitter to join them on a 12-month contract. As the Electrical Fitter you will be responsible for carrying out manufacturing and test tasks within the electrical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives.\n\nRole: Electrical Fitter\n Pay: £28.35 per hour via umbrella (rising to £29.70 per hour after 12 weeks)\n Location: Bolton\n Contract: 12 Months\n Hours: Monday - Friday, 37 hours per week\n Security Clearance: BPSS\n\nResponsibilities:\n\nCertify the product in line with Product Certification procedure.\nDemonstrated ability / willingness to certify own work in line with company quality standards.\nMaintain product certification and approval via regular audits.\nPossess a versatile skill base with the capability to apply these skills across a range of tasks.\nBe fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle.\nEnsure manufacturing build, inspection and where relevant test times are met.\nCheck and complete all paperwork associated with the manufacturing data pack.\nMaintain to the highest level, workmanship standards and product quality.\nEnsure compliance with all associated procedures applicable to the manufacturing process.\nMaintain a safe working environment.\nMaintain a good housekeeping policy.\nWilling to contribute to an environment of process improvement\n Education/Qualifications\n\nApproved Apprenticeship/Apprenticeship Framework/Modern ApprenticeshipOR\n\nVocational G or H Units with Further Education, City & Guilds Parts 1, 2 & 3OR\n\nVocational TR23 Units with Further Education, ONC or City & Guilds Parts 1, 2 & 3OR\n\nVocational NVQ3 with Further Education, BTEC ONC/HNC\n Skills/Experince\n * IPC 610 certified/ trained preferred. \n * Possess experience in electrical wiring and assembly. \n * Previous experience in the aerospace or defence industry would be desirable. \n * Manual handling training. \n * Lifting and slinging (including overhead cranes) training. \n * ESD training.\n Please send your updated CV to: Natalie Dalkin at Line Up Aviation\n Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. \n "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Goods Inwards Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDo you have goods in inspection experience?\n\nDo you have experience with SAP?\n\nDo you want to work with an industry-leading company?\n\nIf your answer to these is yes, then this could be the role for you!\n\nAs the Goods Inwards Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. \n\nYou will be involved in:\n\nEnsuring that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects.\nVerify and accept procured products in line with contractual conditions.\nPracticed in reading and understanding assembly drawings with due regard to dimensional tolerances and machining.\nExamining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first-off inspections.\nProduce relevant inspection/quality control documentation.\nCheck and complete all paperwork associated with the delivered article.\nEnsure inspection times are met.\nControl defect items via segregation from good products. Raise and maintain relevant defect reports.\nMaintain product verification approval process via regular audits. Inspection of PCB\nEnsure compliance with all associated procedures applicable to the manufacturing process. \n\nYour Skillset may include:\n\nFormal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. \nSAP literate \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nGoods Inwards Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Electrical Fitter Defence Manufacturing | Bolton | Long term Contract £21.12£22.12 PAYE / £28.35£29.70 Umbrella | 37 hrs | MonFri | Onsite Are you an apprenticeship trained Electrical Fitter looking for stable, long term work, clean workshop conditions, and consistent day shift hours? This is an opportunity to join a well established defence manufacturing programme at a modern Bolton facility, working on high quality, mission critical products with clear processes, strong quality standards, and long term demand. The Role As an Electrical Fitter, youll be part of an experienced electrical manufacturing team, responsible for assembly, wiring, and certification of electrical products built to approved drawings and industry standards. Youll work in a structured, regulated environment where quality, safety, and right first time builds are key. What Youll Be Doing Electrical assembly, wiring, soldering, and termination to drawings and build instructions Certifying your own work in line with product certification and quality procedures Using hand tools, jigs, fixtures, and electrical measuring equipment Carrying out self checks and inspections to ensure defect free builds Completing manufacturing and certification documentation accurately Working closely with inspection, test, and engineering teams Maintaining high standards of safety, ESD compliance, and housekeeping Supporting continuous improvement across the manufacturing line What Were Looking For Essential Completed electrical or manufacturing apprenticeship (Level 3 or equivalent) Hands on experience in electrical wiring, fitting, assembly, or loom build Comfortable working to engineering drawings, specifications, and quality standards Desirable (not essential) IPC 610 and/or IPC 620 exposure Defence, aerospace, or other regulated manufacturing experience ESD, manual handling, or lifting & slinging training Dont worry if you dont tick every box relevant electrical manufacturing experience is what matters most. Qualifications (Essential Pathways) You must hold one of the following: Advanced / Level 3 Electrical, Mechanical, or Manufacturing Apprenticeship OR Level 3 academic qualification (ONC / Diploma or equivalent) AND Level 3 vocational qualification (NVQ) (NVQ not required if a Level 3 apprenticeship standard has been achieved) Security Clearance British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. About the Site For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. Youll benefit from: Clean, modern working environment Onsite canteen, showers, and bike storage Easy motorway access and nearby amenities What Happens Next? If your application meets the initial criteria, a member of our talent team will contact you to arrange a structured screening call to discuss your experience, the role, and next steps in more detail. TPBN1_UKTJ

Goods Inwards / Incoming Quality Inspector (Stores & Manufacturing) Bolton | Onsite | Defence Manufacturing Why apply? An opportunity supporting a major UK defence programme Clearly defined role focused on goods inwards & stores inspection (not bench/final inspection) ________________________________________ The opportunity As a trusted partner to the UK Ministry of Defence, our client is seeking an experienced Goods Inwards / Incoming Quality Inspector to join their established manufacturing site in Bolton. This role is critical to ensuring all incoming materials and components meet purchase order, contractual, and quality requirements before entering production. You will play a key part in protecting compliance, supporting manufacturing schedules, and maintaining the highest standards within a safety critical, regulated environment. ________________________________________ What youll be doing Inspect and verify all incoming goods against purchase orders, delivery notes, and quality documentation Formally accept procured products in line with approved standards and contractual conditions Read and interpret engineering and assembly drawings, including dimensional tolerances and machined features Inspect components for damage, surface finish, paint defects, and first off requirements where applicable Complete, maintain, and update accurate inspection and quality records, ensuring full traceability Validate delivery paperwork and system entries to support audit and compliance requirements Meet agreed inspection turnaround times to support manufacturing demand Identify, segregate, and control non conforming material, raising and maintaining NCRs as required Support product verification and approval activities, including audits and PCB inspection where applicable Maintain compliance with manufacturing, quality, and safety procedures while contributing to a safe, organised working environment ________________________________________ What were looking for Essential experience Proven goods inwards, incoming inspection, or stores inspection experience within a manufacturing or regulated environment Strong understanding of inspection requirements for safety critical components Experience managing receipt, verification, traceability, and non conformance control Confidence working with inspection documentation, delivery paperwork, and quality records Please note: This role requires goods inwards / stores inspection experience. Final or bench mechanical inspection experience alone is not suitable. Qualifications (one of the following) Level 3 Electrical/Mechanical Engineering or Manufacturing Apprenticeship, or Level 3 Electrical/Mechanical Engineering or Manufacturing qualification (e.g. NVQ, ONC, Diploma or equivalent). Qualifications must meet the required standard for the role. Additional skills Manual handling and ESD awareness SAP experience is desirable but not essential ________________________________________ Security clearance British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. ________________________________________ About the site The Bolton facility is one of the North Wests leading manufacturing sites, supporting defence programmes for over 25 years. The site offers: Onsite canteen Free parking, showers, and bike racks Convenient motorway access ________________________________________ What happens next? Once you apply, and if your application meets the selection criteria, a member of the talent acquisition team will contact you to arrange a structured screening call. This conversation will explore your experience and suitability for the role in more detail. TPBN1_UKTJ

Our client has an opportunity for a General Operator to join them on a contract basis for 12 months with possible potential for extension. You will be responsible for the carrying out of manufacturing and self-certification tasks within the deployed business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: General Operator Location: Bolton - Fully Onsite Hours: Full Time - Monday to Friday Hourly Rate: £24.78 per hour via Umbrella, inside IR35 What you'll be doing: Carry out detailed standard assembly / manufacturing activities, undertaking all work to requisite procedures, quality standards, safety requirements and timescales. Contribute to the efficient movement of work and information in the manufacturing area. Adhere in all activities to agreed standards and behaviours. Comply with all health and safety requirements. IPC 610 certified / trained preferred.As a general operator you maybe tasked to work across a number of departments these might include: Looming PEC Assembly Plastics Department Manufacturing Control/ Stores Requirements: Manufacturing experience Extensive experience with wire looming Read and interpret layouts. Follow instructions. Willing to work flexible shift patterns. Attention to detail. Work on own with minimal supervision. PC literate If you are interested in applying for this position and you meet the requirements, please apply now! Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

An exciting opportunity for an Inspector to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment, Ideally Electrical & Mechanical Skilled but predominantly in an Electrical biased area. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This opportunity is for a Inspector (Electrical biased) to join the Manufacturing team supporting inspection and certification of a variety of mechanical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds have been manufactured in accordance with drawing requirements and specifications and are free from damage; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring any non-conformances are processed and controlled correctly; Ensuring that all manufacturing documentation is complete and carries the necessary certifications; Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical or Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved Practiced in reading and understanding assembly drawings and planning instructions Practiced in the inspection of mechanical hardware including damage and build integrity Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

An exciting opportunity for an experienced Electrical Fitter to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This opportunity is for an Electrical Fitter to join the Manufacturing team supporting assembly and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are manufactured in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. Role: Mechanical Engineer Location: Bolton, fully onsite Hours: 37 per week Hourly Rate: £32-£35 per hour via Umbrella, inside IR35 Clearance: SC required before starting What you'll be doing: The main aspects of the role will be as technical support for the metrology department supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Requirements: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required. Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required. Experience and knowledge in dimensional calibration required Experience and knowledge of using and creating programs for coordinate measuring machine required. Good knowledge of temperature and pressure calibration desirable Able to deal with multiple issues, tasks and priorities concurrently.If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

Electrical Fitter Bolton 12 Month Contract Oportunity for a Time Served Electrical Fitter to join our clients electrical manufacturing department. You will play a key role in the build, assembly, and certification of mission-critical products. The Role As an Electrical Fitter, you will be responsible for the end-to-end manufacturing and testing of electrical components. You won’t just be building; you will be the guardian of quality, certifying your own work and ensuring every product meets rigorous industry standards. Key Responsibilities Perform complex electrical wiring and assembly tasks in accordance with defined workmanship standards. Take ownership of quality by certifying your own work in line with company procedures and maintaining approvals through regular audits. Utilize a wide range of tools, equipment, and measuring instruments to meet precise build and test specifications. Ensure all manufacturing data packs and paperwork are completed accurately while meeting strict project timescales and budgets. Contribute to a safe, clean, and efficient working environment through proactive process improvement suggestions. To be successful in this role, you must hold a formal qualification via one of the following routes: Approved Apprenticeship Framework (Modern/Standard). City & Guilds Parts 1, 2 & 3 (with associated Vocational Units/Further Education). NVQ Level 3 / BTEC ONC/HNC in a relevant electrical discipline. Desirable Skills: IPC 610 certification or training (Highly Preferred). Previous experience within the Aerospace or Defence industry. Certified training in Manual Handling, Lifting & Slinging (including overhead cranes), and ESD protocols. Please note that security checks will be carried out prior to the start date

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Wiring Operator on an initial 12 month contract and then ongoing and long-term thereafter. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella). Overtime Rates of 'time and a half' for all hours worked over 37 hours per week. Electrical Wiring Operator Job Description: An exciting opportunity for a Skilled Electrical Wiring Operator to join our Calibration and Maintenance team for a 12-month period in a fast-paced but friendly and inclusive Manufacturing environment. We are seeking a Skilled Wire Operator to join our Calibration & Maintenance Team, to fault diagnose and repair bespoke cabling to drawing specifications. Fault finding and subsequent repair of cable assemblies. Carry out surface mount repair on CCAs. Maintain and repair test/measuring equipment to component level. PAT testing across the manufacturing site. Interrogate drawings during fault finding activities. Safety systems testing of Test & Measuring equipment in line with documented procedures. Provide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract. Maintain excellent workspace husbandry disciplines. Maintain a high degree of tool control and FOD practices. Assist with maintenance of manufacturing aids as and when required. What we're looking for from you: All three of the below are required: Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved IPC 620 & Dynamic Cabling certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable

An opportunity has arisen for an experienced Manufacturing Electronics Engineer to join our manufacturing team in Bolton. Fantastic opportunity to support across all stages of product assembly Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We are seeking an Electronics Engineer to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE).The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. These tasks include supporting routine calibrations, commissioning, drift analysis, fault finding and repair of test equipment. You will be working within an experienced team of Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. Annual reviews assess and plan any future development opportunities and needs to widen your overall engineering knowledge. Teamwork and knowledge sharing is an essential part of the team ethos as is the understanding of workload and throughput achievements. What we're looking for from you: HNC/HND with relevant experience Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level. Good understanding of calibration principles and processes. Able to mentor other or more junior staff when requested by line manager. Able to deal with multiple issues, tasks and priorities concurrently. Analytical and problem solving skills. Good communication skills with the ability to tailor communication to the relevant audience. A good understanding of SAP would be desirable. Experience of working on Environmental Chambers an advantage.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Our client, a long standing partner to the UK Ministry of Defence, is seeking a hands on General Operator with experience in wire looming, cable assembly, and fine detail manufacturing to join a high integrity defence production environment. This role is bench based, detail focused, and ideal for operators who enjoy precise wiring, crimping, soldering, and microscope work. What youll be doing Building and securing wire looms and cable harnesses using crimping, binding, and routing techniques Carrying out fine wiring and fibre optic tasks through lope holes on the production line Completing assembly tasks to detailed work instructions, drawings, and quality standards Using hand tools, soldering irons, and magnification equipment for precision work Recording and self certifying completed tasks in line with defined procedures Working to strict ESD, quality, and health & safety standards Your primary focus Wire Looming & Cable Harness Assembly Basic soldering and crimping Microscope / magnified assembly work Exposure to other areas (as required) PEC / CCA Assembly Micro electronics Soldering Assembly Plastics assembly activities Manufacturing Control / Stores (kitting, goods inwards) (This is not a stores based role cross training only.) What were looking for Strong manual dexterity and attention to detail Experience in wiring, cable assembly, looming or electronic build Confident reading diagrams, layouts, and work instructions Comfortable working under a microscope for extended periods Able to work independently and follow defined processes Flexible to shift patterns Desirable (not essential) IPC 610 awareness or training ESD training Experience with crimping tools and fine soldering Basic PC / Microsoft skills Why this role Long term defence programmes Clean, structured manufacturing environment Opportunity to develop cross phase skills without losing a primary specialism What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ