Trabajos health and safety engineer en CroydonCrear alertas

The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations – they’re the ones keeping vital machinery running at all times. As an RME Technician, you’ll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities • Proactive and preventative maintenance tasks on a wide range of site equipment, • Carry out reactive repairs and fault diagnosis in a live distribution warehouse, • Use the latest tools to maximise equipment effectiveness, • Uphold all health and safety policies and practices, • Support the development and progression of on-site apprentices, • Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You’ll carry out a range of planned preventative maintenance to our sites’ equipment to make sure it’s working safely. You’ll respond promptly to breakdowns, investigation, finding, and implementing solutions as quickly as possible. You’ll also make suggestions for long-term improvements. Working alongside senior colleagues, you’ll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You’ll work on a range of shifts to make sure our sites are supported around the clock – allowing Amazon delivery at speed. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology – some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon’s technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon’s crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. • completed a 4-year UK certified apprenticeship, or NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics, • Relevant experience as a qualified engineer, • Relevant experience working in mechanical and/or electrical maintenance, • Advanced proficiency in the local language verbally and in writing, • Experience in condition-based monitoring, • Experience working with print and apply machines, • Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice (_) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. null

Telecoms Cable Puller / Pre Enablement engineer Pro Search UK are hiring experienced telecoms engineers with experience in Cable pulling , fibre, civils, Rodding & Roping, Undeground network or network build. Start date of Telecoms Cable Puller / Pre Enablement engineer : - Immediate start available. Pay of Telecoms Cable Puller / Pre Enablement engineer : - Telecoms Cable Puller / Pre Enablement engineer will be working on a competitive rate card through a self employed CIS setup. - If you work hard and put in the effort there is no cap on your earnings. Job Description of Telecoms Cable Puller / Pre Enablement engineer : - This will involve laying cables, rodding and roping underground networks and preparing the site to ensure a smooth and efficient connection process later. - Carrying out network Cable Puller / pre-enablement activities - Installing, maintaining and replacing network infrastructure equipment - Cable Pulling and proving fibre cables through the underground duct networks - Clearing blockages and identifying network faults - Working within footways, carriageways, cabinets, chambers and customer access areas - Using specialist tooling and civils equipment safely and effectively - Ensuring all work is completed in line with health, safety, and quality standards Key Requirements of Telecoms Cable Puller / Pre Enablement engineer - Previous pre-enablement, Cable pre pull, telecoms, network build, civils, fibre, or utility experience. - Full UK manual driving licence with no more than 6 points on

Up to £48k | Company Vehicle Provided | Permanent Position | Company Benefits & Holidays | Full-Time Were on the hunt for skilled and proactive Automation Engineers to join our fast-growing team. Workingacross social housing and commercial contracts, youll be responsible for reactive callouts, planned maintenance, servicing, fault finding, repairs and installations across a range of automated doors, gates, barriers and access control systems. Were particularly interested in engineers who have experience acrossmultiple disciplines ideally automatic doors, gates/barriers and access control but strong experience in any one of these areas will be considered. If youre hands-on, technically minded, customer-focused and enjoy solving problems on the go, we want to hear from you! • Responding to reactive callouts and diagnosing and repairing faults efficiently, • Carrying out installation, servicing, maintenance and repairs, • Working on automatic doors, gates, barriers and access control systems, • Carrying out surveys, inspections and site assessments, • Fault finding and troubleshooting mechanical, electrical and control systems, • Completing planned preventative maintenance (PPM), • Providing professional and customer-focused service on site, • Accurately recording works completed, parts used and technical information, • Completing job reports, timesheets and relevant documentation, • Working in line with company procedures and health & safety requirements, • Supporting out-of-hours callouts, overtime and an on-call rota where required, • Proven experience as an Automation Engineer / Automatic Door Engineer / Gate & Barrier Engineer / Access Control Engineer, • Experience working with automatic doors, gates, barriers and/or access control systems, • ADSA or ADIA accreditation would be highly desirable, • Ideally 3+ years industry experience, • Strong fault-finding and problem-solving skills, • Good understanding of electrical and mechanical systems, • Full UK Driving Licence, • A professional, positive and customer-first attitude, • Excellent communication skills and attention to detail, • Ability to work independently and manage your own workload, • Pride in your work and a commitment to delivering a high-quality service #J-18808-Ljbffr

As we evolve into Social Wellness Clubs, we are creating spaces and experiences that support every aspect of our members’ physical, mental, nutritional and social wellbeing. By bringing together expert guidance, genuine community, personalised experiences and innovative technology, we make wellness feel accessible, welcoming and easy to navigate. Virgin Active is committed to recruiting the finest people who share our passion for creating exceptional experiences and delivering world-class service every day.We are looking for Maintenance Engineer to join our Maintenance Team Role Type: FTC Number of Hours: 40 In this role, you will play a part in bring responsible for operating and maintaining a viable and effective preventative maintenance programme for the whole site, including the building shell and surrounding grounds under supervision of their line manager. The Role • Ensuring that the facility adheres to all engineering compliance standards not putting members or employees at any risk., • Monitoring the basic fixtures and fittings of the building are maintained to the highest standards of order and tidiness at all times., • Adhering to daily & weekly checks to ensure smooth operation of site, keeping up to date & accurate records., • Following all Health & Safety policies and reporting any issues or concerns immediately., • Maintaining the basement, plant rooms, roof and fire exits to company standards and ensuring all plant and equipment is maintained., • Being proactive, use your initiative and take ownership of situations such as member complaints,, • Working as part of the wider club team, demonstrating a professional & courteous manner to members, assisting with queries they may have., • Fulfilling Duty Shifts when required, therefore having responsibility and accountability during the shift, controlling staffing and facility issues throughout the club. Who We’re Looking For • A technical Level 2 qualification of City & Guilds equivalent or higher. What You’ll Get • The opportunity to be part of a brand redefining the future of wellness, • A premium environment with industry-leading facilities, • Development and progression opportunities aligned to your level, • Access to a vibrant, engaged member community, • The platform to build your career, reputation and impact The Perks • 33 days (including bank holidays) annual leave, plus a Celebration Day and we want you take them, • Access to The Peoples Pension, with our contributions at 3%., • Complimentary Virgin Active membership for you and a buddy. You can also get free membership for your children too, ability to take advantage of our Club V., • We want you to love Virgin Active like we do, so you get discounts across Virgin active everything from guest passes to 50% offPTsessions., • You will join Virgin Family where not only can you communicate with your colleagues across Virgin Group, but also many discounts (including Virgin Atlantic, Virgin Holidays and Virgin Media/O2), • Maintaining a healthy diet while at work can be hard, so we offer all our team members 20% off food and drink at our KAUAI branches located in clubs., • Managing finances can be difficult, so we offer access to Salary Finance. They can support you with loans and savings plans, as well as help you become a personal finance expert., • Mental health is a cornerstone of wellbeing. Our Health Heroes employer assistance programme is there when you need a helping hand with 6 free counselling sessions., • We know finding a new home to rent can be stressful. We partner with Dexters who offer complimentary corporate letting services meaning no tenant charges., • Access to ePoints, offering loads of online discounts to retailers., • Always wanted to take that yoga course? Well VA offer discount on all their Academy courses, trained by the very best instructors. Pay Range #J-18808-Ljbffr

• Health and Wellbeing Plans, • 23 days paid holiday increasing to 25 after 2 years, • Discounts and Cashbacks, • Paid Volunteering days, • Employee Assistance Program, • Refer a Friend Scheme, • Cycle to Work Scheme Find out exactly what skills, experience, and qualifications you will need to succeed in this role before applying below. Carlisle Support Services is looking for a Fabric Engineer who will be responsible for delivering high quality planned preventative maintenance (PPM) and reactive repair tasks across building fabric elements, with a particular focus on roofing systems, gutters, and downpipes. This role ensures the safe, compliant, and efficient upkeep of building structures, preventing deterioration and resolving defects promptly to maintain asset integrity. Days/Hours - 10pm till 6am Sunday to Thursday • Carry out scheduled PPM tasks on: Flat and pitched roofing systems, Gutters, downpipes, and drainage channels, Roof access systems and fall restraint equipment (visual checks only, unless certified), Building fabric elements (doors, windows, walls, ceilings, floors, internal finishes), • Inspect roof coverings for defects such as: Blistering, membrane failure, cracked tiles, slipped slates, Blocked or damaged gutters/downpipes, Failed flashings or seals, • Complete PPM reports with clear photos, descriptions, and recommended follow up works., • Attend urgent call outs for building fabric issues including: Roof leaks and water ingress, Blocked or failing gutters/downpipes, Damaged cladding, fascias, or soffits, Internal damage resulting from weather or structural defects, • Diagnose faults accurately and implement effective temporary or permanent repairs., • Perform minor roofing repairs such as: Replacement of broken or slipped tiles, Patching membrane or felt systems, Clearing guttering and downpipes, Repairing joints, seals, brackets, and fixings, • Identify when specialist contractors are required for escalated works., • Carry out general fabric repair tasks including: Carpentry (doors, frames, locks, skirting), Basic plastering and patch repairs, Painting, sealing, and finishing, Minor masonry and concrete repairs, • Work in line with health & safety regulations, method statements, and risk assessments., • Ensure work areas are left safe, clean, and secure., • Report building fabric risks (e.g., structural deterioration, unsafe roof access conditions)., • Complete job sheets, PPM documents, and compliance records., • Communicate clearly with clients, helpdesk, and contract management regarding issues, risks, and delays., • Provide accurate material and labour estimates for quoted works., • Strong experience in roofing maintenance (flat and/or pitched)., • Proven background in building fabric maintenance within commercial or industrial environments., • Ability to diagnose and resolve fabric-related reactive faults., • Competence in gutter, downpipe, and roof drainage PPM and repairs., • Good understanding of building structures and drainage systems., • Full UK driving licence., • Experience working on FM contracts or multi-site environments., • Certification in working at height/roof access systems., • PASMA/IPAF (useful but not essential)., • Basic plumbing, carpentry, or plastering skills. Join a growing market-leading brand of support services to work with the UK’s largest brands such as Tottenham Hotspur Stadium, Jaguar Land Rover, Tesco, BBC StudioWorks, and many more. Carlisle currently employees over 5,000 dedicated and enthusiastic staff members to deliver events, security cleaning, and retail facilities support services across the UK’s most renowned sites and critical infrastructure. At Carlisle, we are committed to Equality, Diversity, and Inclusion in all areas of employment, recruitment and selection, training, development, and promotion. In all situations people will be judged solely on merit or ability. #priority #J-18808-Ljbffr

Location/s: Belfast, Brighton, Bristol, Croydon, Altrincham, Newcastle, York Recruiter contact: Abhijeet Barpanda Mott MacDonald is a global engineering, management, and development consultancy with over 20,000 employees across more than 50 countries and 140+ offices. We work across incredible global industries, delivering exciting work that is defining our future and making an important societal impact in the communities we serve. Our people power our performance – we succeed when they do. With countless opportunities to collaborate, learn, and grow, the possibilities for excellence are as varied as every individual. Whether you want to grow as a subject matter expert or broaden your experience with roles across our international community, you’re surrounded by global specialists who want to combine their expertise and champion you to be your best. As a proudly employee-owned business, we benefit our clients, our communities, and each other, investing in creating the right space for everyone to feel empowered, included, and valued. Whatever your ambition, Mott MacDonald is where people come to be brilliant. The Energy unit delivers services to clients globally across several sectors including hydropower, nuclear, waste, renewable generation and transmission & distribution networks. Together we provide integrated engineering and project management services across the project lifecycle – from concept and design to construction and operations, to decommissioning or repowering and life extension. Together with our clients, we’re helping to deliver the energy transition globally. Mott MacDonald has an exciting opportunity for a Senior Electrical Engineer to join our expanding Power Transmission and Distribution team. The successful candidate will be motivated to work on a range of diverse industry leading projects developing innovative solutions for power transmission grid systems and for client transmission and distribution installations ensuring security of electricity supply, developing the integration of renewable energy sources and bringing large power infrastructural plans from concept to delivery stage. Your role will include working with a range of clients/stakeholders including major utilities and large global demand customers in a rapidly changing energy sector. The role is a permanent position within our team for an ambitious and enthusiastic Electrical Engineer. Reporting to the Power team Principal Engineer, you will be responsible for a range of tasks including: • Primary plant layout for HV substations, • Equipment specifications for HV Plant and ancillary equipment, • Providing engineering design input to major electrical power infrastructural development projects through various lifecycle stages from feasibility/front end engineering stages to detailed design/site construction monitoring and commissioning, • Coordination with client project teams and internal team disciplines within Mott MacDonald including civil, structural, environmental, survey/geotechnical, transport, protection and control and CAD/BIM team, • Delivering projects in new technologies e.g. energy storage, HVDC systems, smart grid solutions, waste to energy etc, • Provide professional services to clients in the UK and overseas, • Qualified to degree level and will ideally be, or working towards Chartered Engineer status;, • Experience working in the power transmission and distribution industry;, • Experience relating to design, delivery and supervision of HV substation solutions (110kV to 400kV);, • Experience in development of specifications for HV AIS/GIS substations and associated primary/secondary equipment;, • Experience of all stages of project lifecycles;, • Experience in applying regulatory and client specific health and safety requirements to HV plant system designs;, • Experience in the preparation of technical reports in English;, • Experience in design of Overhead Line Systems for transmission networks:, • Experience in design of HV cable systems (minimum 110kV);, • Experience in site construction and/or testing/commissioning for HV plant systems;, • Experience in earthing software design (CDEGs) and system studies/protection co-ordination software (ETAP);, • Experience in control and protection systems design., • Masters Degree At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team, and personal commitments. We offer a hybrid working policy that embraces your well-being, flexibility, and trust. We put equality, diversity, and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they can contribute. We want you to perform your best at every stage in the recruitment process. If you are disabled or need any support to enable you to apply or attend an interview, please contact us at and we will talk to you about how we can support you. We offer some fantastic benefits including: • Private medical insurance for all UK colleagues., • Health cash plan to support you with every day health costs and treatments., • Access to Peppy, providing free support from menopause experts for all UK colleagues., • A variety of wellbeing support is available through our comprehensive wellbeing program, including access for you and your family., • Ability to flex your salary to opt into a wide range of health benefits, many of which can be extended to your family too., • We match employee pension contributions between 4.5% and 7%., • Life assurance equal up to 4 x your basic salary, with an option to increase the level of cover to 6 x your salary., • Our income protection scheme provides a financial benefit, as well as absence and return to work support due to long-term illness or injury., • Flexible benefits, including increased life assurance cover, critical illness insurance, payroll saving and will writing., • As an independently owned business we share the financial success of the business with all our colleagues in various ways including annual bonus schemes., • A minimum of 33-35 days holiday each year, inclusive of public holidays and dependent on level, with the ability to buy or sell leave through our flexible benefits programme., • Holiday entitlement increased to a minimum of 35 days after 5 years’ service., • Variety of employee saving schemes and discounts from high-street retailers., • Enhanced family leave policies, including 26 weeks paid maternity and adoption leave, and two weeks paid paternity/partner leave., • Our shared parental leave matches maternity leave meaning we pay up to 24 weeks at full pay., • Up to five additional days leave are provided for those with significant caring responsibilities, two of which are paid., • Primary annual professional institution subscription., • A broad range of opportunities to enhance both technical and soft skills through mentoring, formal training, and self-development options., • Join a wide range of groups including our Advanced Employee Networks which support our LGBTQ+, gender, race and ethnicity, disability, and parents/carers communities., • Make a difference within our communities through our social outcomes. Location(s): Brighton, GB Croydon, GB Newcastle Upon Tyne, GB York, GB Belfast, GB Contract Type: Permanent Work Pattern: Full Time Market: Energy Discipline: Electrical Job Ref: 16439 #J-18808-Ljbffr

MH3 - Forklift Engineer Location: Croydon Salary: Up to £50,000 + Overtime + Van Overview: First Military Recruitment are currently seeking a Forklift Engineer on behalf of one of our clients. The successful candidate will be responsible for carrying out routine maintenance and repairs to long/short term machines and customers owned equipment. Ensuring best practice with quality and professionalism are met at all times and to maintain customer satisfaction. Our client strongly encourages applications from ex-military personnel however, all candidates will be considered. Duties and Responsibilities: • Responsible for commissioning, maintenance and servicing of equipment and plant machinery., • Repair, maintain, and service forklift trucks, • Repair or replace faulty parts, • Request parts via PDA, • Report to Service Co-ordinator for scheduled work, • Maintain and develop relationships with Customers, • Follow Service Team procedures., • Adhere to site Health & Safety requirements., • Pursue personal development of skills and knowledge necessary for effective performance of the role and attend training courses as required., • Adhere to company Quality and Compliance responsibilities, and policies and procedures., • Adhere to Health & Safety responsibilities and procedures, • The above is not an exhaustive list of duties and you will be expected to perform different tasks as necessitated by your changing role within the organisation and the overall business objectives of the organisation. Skills and Qualifications: • NVQ in Mechanical Engineering (or equivalent), • Numeracy skills, • Knowledge of Forklift trucks, • Analytical with an eye for detail, • Excellent communications skills, • Professional and strong interpersonal skills, • Able to work to tight deadlines, • Flexible and willing to contribute by helping others, • Courteous, friendly and tactful Location: Devizes Salary: Up to £50,000 + Overtime + Van

Recruit4Staff is proud to be working with their client, a leading UK designer & manufacturer, in their search for a permanent Air Conditioning Install Engineer to work in their Shropshire head office. What our client is offering for the successful Air Conditioning Install Engineer : £38,480 per annum Hours of work: 8:00am - 5pm Monday to Friday but flexibility daily is required Permanent position 25 Days holiday + Bank Holidays Life Insurance Company van Tools for each job will be provided Door to door pay Paid rest time following any night works Company pension Company events Store discounts The Role - Air Conditioning Install Engineer : Install and commission commercial HVAC and air conditioning systems Fit VRV/VRF, split, and packaged air conditioning units Install refrigeration pipework, drainage, ventilation, and ductwork Read and interpret technical drawings and installation schematics Perform pressure testing, evacuation, and system commissioning Work with project teams to deliver installations safely and on schedule Ensure all work meets manufacturer specifications and industry standards Complete digital job reports and maintain accurate paperwork Support site setup, material management, and commissioning activities Follow RAMS, health and safety procedures, and working at height protocols What our client is looking for in an Air Conditioning Install Engineer; F-Gas Certification (Category 1 or equivalent) - ESSENTIAL NVQ / C&G Level 2 or Level 3 in Refrigeration & Air Conditioning (or equivalent experience) - ESSENTIAL Proven experience installing commercial HVAC / air conditioning systems - ESSENTIAL Experience installing VRV/VRF and split systems - ESSENTIAL Ability to read and interpret technical drawings and installation schematics - ESSENTIAL Full UK Driving Licence (Manual) - ESSENTIAL Asbestos Awareness - ESSENTIAL Experience using electronic devices (e.g. tablets) for reporting and communication - ESSENTIAL Willingness to travel nationwide and stay away from home where required - ESSENTIAL Flexible approach to working hours, including night work where required - ESSENTIAL IPAF (PASMA) / Working at Height certification - DESIRABLE CSCS / Skill Card (HVAC or Mechanical) - DESIRABLE Experience working on commercial building services projects - DESIRABLE Experience installing ventilation or ductwork systems - DESIRABLE Electrical awareness or experience working alongside controls / BMS systems - DESIRABLE Key skills or similar Job titles as the Air Conditioning Install Engineer: Mechanical Engineer (HVAC), Building Services Engineer, Building Systems Engineer, Mechanical Building Services Engineer, MEP Engineer, Facilities Engineer, HVAC Design Engineer, Building Services Design Engineer, Mechanical Design Engineer, Applications Engineer (HVAC), Building Performance Engineer, Energy Engineer, Sustainability Engineer, Commissioning Engineer, Building Physics Engineer, HVAC Project Engineer, Mechanical Project Engineer, HVAC Installation Engineer, Site Engineer (Mechanical), MEP Project Engineer, Project Manager (HVAC), Contracts Engineer, HVAC Maintenance Engineer, Facilities Maintenance Engineer, Building Maintenance Engineer, Service Engineer, Field Service Engineer, Reliability Engineer, Asset Engineer, BMS Engineer, Controls Engineer, Building Autom TPBN1_UKTJ

Who We Are Fixatex Ltd is a family-run electrical services provider built on trust, teamwork, and technical excellence. Established in 2000, we have proudly supported clients across London and the Southeast for over two decades. Operating from our head office, warehouse, and purpose-built training centre in Hertford, we deliver high-quality electrical services while continuously developing and supporting our people. The Role We are looking for an experienced and motivated Electrical Testing & Remedial Works Engineer to join our growing team, predominantly within South London with your core hours being Monday to Friday 08:00 - 17:00. You will be responsible for completing Fixed Wiring Testing (EICR) across a variety of domestic and commercial properties, primarily within social housing and local authority sectors, which includes carrying out remedial works during the inspection visit where possible, with full rewires for non-compliant properties. Key Responsibilities · Conduct EICRs and complete associated remedial works · Diagnose, identify, and report electrical faults accurately · Complete all job notes, photos, and certificates using Oneserve and EasyCert · Communicate professionally with residents, clients, and colleagues · Deliver excellent customer service at all times · Adhere to company policies and operational standards · Take part in training and support continuous business improvement · Carry out additional duties as required by management · Work safely in accordance with current Health & Safety regulations What We’re Looking For · Strong knowledge of the electrical industry · Extensive experience in testing and inspection · Competent in completing electrical certification · Proven diagnostic and fault-finding ability · Ability to work as part of a team · Accurate reporting and excellent attention to detail · Confident using mobile devices to complete electronic job sheets · Good practical skills and customer communication · Positive attitude, reliability and good timekeeping What You Will Have · L3 Electrical Installations Diploma · City & Guilds NVQ Level 3 Electrotechnical Qualification (or equivalent - preferred) · AM2 Assessment (preferred) · Inspection & Testing (C&G 2391-51) · 18th Edition Wiring Regulations (C&G 2382-18) · Full UK driving licence (held for at least 12 months) What We Offer At Fixatex, we believe great work deserves great rewards. You can expect: · Competitive salary based on experience · Private healthcare contribution · Increasing holiday allowance with length of service · Company vehicle with private mileage allowance and fuel card · Supportive sick pay and wellbeing policies · Test equipment and PPE provided · Access to a fully stocked warehouse · Ongoing training and development in our purpose-built training centre · Clear progression opportunities · A genuine team environment where everyone’s input matters · A supportive workplace that recognises the need for flexibility · Regular team events and celebrations · £1000 employee referral scheme Our Values We’re proud of the culture we’ve built and are looking for people who live by our values: • Care like it’s family, • Ownership at every level, • One team with integrity, • Keep raising the bar If you’re a qualified, motivated electrical professional who values quality work, teamwork, and long-term growth, we’d love to hear from you. Apply today and become part of the Fixatex family. We are committed to ensuring our recruitment practices promote equal opportunities, embrace diversity, and prevent discrimination. Candidates are assessed fairly and consistently against the skills, experience, and competencies required for each role, ensuring that all appointments are made on merit. Beyond recruitment, we maintain an ongoing commitment to building a diverse workforce and fostering an inclusive working environment for all. We strive to create a culture where everyone feels respected and supported, can contribute fully, and is encouraged to reach their full potential. #J-18808-Ljbffr

I am pleased to be representing a multi-national engineering group with their global headquarters based in the UK. The group comprises of market leading businesses across products such as steam systems, flow control, filtration, compressed air, pumping systems and fluid transfer applications. They are specialists in providing turnkey solutions and can be found within a range of process industries such as food & beverage, water, healthcare, pharmaceuticals and industrial markets. Training and development are second to none within this leading organisation. An outstanding opportunity has become available to join the field service team in South London This range is provided by Rotaflow Talent Solutions. Your actual pay will be based on your skills and experience — talk with your recruiter to learn more. As field service engineer you will be responsible for maintaining, fixing, commissioning and servicing steam systems across customers in Leeds. The role will also be responsible for providing training to customers that require this. Typical customers in South London consist of food and beverage companies such as distilleries and breweries, pharmaceutical, hospitals and wastewater. You will work as part of a team and be responsible for technical assessments, health and safety and providing job reports on work completed. The training in this role will be extensive and you will spend a large amount of time with senior service engineers and service leaders to learn the products and engineering aspects of the role. They will also fund relevant training courses such as safe isolation, electrical 101 and working at height as well as investing in your development through the business. Regular product training will also be given with regular opportunity to spend time with the wider team. The successful Field Service Engineer must have a mechanical or electrical qualification and may have worked with steam technology or boiler systems however this is not a requirement. Closely related industries include areas such as flow control, valves, actuators, pumps, instrumentation, automation, combustion, heat exchangers, heat transfer, control systems, water treatment, compressors or compressed air, HVAC and related products but any mechanical engineering experience will be considered. This role is open to service engineers, engineering technicians, maintenance engineers, engineering specialists, technical support and related engineering roles. The position is field based and will be required to travel most days to customer locations across South London and the South East of England The candidate must have a mechanical or electrical qualification. They may have worked with steam technology or boiler systems; however this is not a requirement. Closely related industries include flow control, valves, actuators, pumps, instrumentation, automation, combustion, heat exchangers, heat transfer, control systems, water treatment, compressors or compressed air, HVAC and related products, but any mechanical engineering experience will be considered. • Associate, • Full-time, • Business Development, Sales, and Distribution, • Staffing and Recruiting London, England, United Kingdom £29,000-£32,000 #J-18808-Ljbffr

Job Types: Full-time, Permanent Salary: £40,000 to £45,000 per year Experience and Qualification dependent My client is based in Sutton, Surrey. The company has been running since 2003 providing Technical M&E service support to the Commercial Building Maintenance sector. They run a small team of highly skilled mobile engineers covering London, Greater London and South of England. The role is to provide a variety of general maintenance and reactive services and corrective works on buildings, plant and site • Essential that you have experience working within plant rooms and have excellent communication skills., • Full current driving licence with no more than 3 points., • A sound knowledge of mechanical engineering and the ability to carry out planned and un-planned safety inspection and maintenance work on mechanical plant and associated equipment in accordance with FSG20 and the like., • To have completed a recognised apprenticeship or hold a recognised qualification e.g. City & Guild, BTEC, NVQ level 3 in a mechanical engineering discipline as a minimum qualification, • Experience of selecting and installing a wide range of pipework types and systems, • The ability to read and understand schematic drawings in order to carry out effective fault finding and diagnostics., • Experience of working with hydraulic and pneumatic systems, • Electrical principals appropriate to actuation of mechanical systems and plant, • Experience of working with pumps (DOL and inverter driven) and capable of undertaking fault finding / repairs when necessary, • Experience of Health & Safety procedures relevant to engineering activities and the safe handling of heavy equipment, • Willing and able to work in a varied, multi-skilled role, assisting other trades as and when required, • Experience of PPM systems of work, • Produce details of time and materials required for any minor works for quoting purposes, • Ability to provide job updates and reports in a timely fashion, including all necessary technical detail needed to enable correct remedial works when required, • 40 Hours Per week, • Over Time available (but not guaranteed), • 28 days Holiday including Bank Holidays, • Company Van and fuel card, • Work Wear, • Pension, • Private Medical, • Company Phone, • Training The successful candidate will be required to pass Home Office Security Vetting (SC). We are looking for a highly technical and motivated engineer to join their team who will be willing and able in assisting my client to progress our aspirations in the commercial market #J-18808-Ljbffr

Field Service Engineer - Forklifts Location: Croydon, Greater London Salary: £37,000 - £42,000 Basic Salary (OTE - £50,000+) Benefits: Company Van, Fuel Card, Paid Door-to-Door Travel Hours: Monday-Friday, 08:00-17:00 (42.5 Hour Week) Job Type: Full-Time, Permanent Interaction Technical are working in partnership with a leading material handling and forklift specialist to recruit an experienced Field Service Engineer covering the surrounding areas. This is an excellent opportunity for a Forklift Engineer, Plant Fitter, Agricultural Engineer or Mobile Service Engineer looking to join a business that genuinely values its engineers. Offering continuous manufacturer training, clear progression routes, paid travel and substantial overtime opportunities, this role provides long-term career stability and strong earning potential. Whether you're already working on forklifts or come from a plant, agricultural, powered access, commercial vehicle or automotive background, this could be the next step in your engineering career. • Paid door-to-door travel, • Company van & fuel card, • Personal use of company van (within policy), • 24 days holiday + bank holidays (32 days total), • Company pension scheme, • Ongoing manufacturer training, • Technical development on electrical, hydraulic and diagnostic systems, • Excellent opportunities for progression into Senior Engineer, Team Leader, Training, Technical Support or Management positions, • Stable, long-term career with a growing national business, • Regular overtime available paid at 1.5x hourly rate The business offers consistent overtime opportunities, allowing engineers to significantly increase their annual earnings. Based on a £37,000 Basic Salary 5 Hours Overtime per Week @ 1.5x Approx. Additional Earnings: £6,500 per year Total Earnings: £43,500+ 10 Hours Overtime per Week @ 1.5x Approx. Additional Earnings: £13,000 per year Total Earnings: £50,000+ Based on a £42,000 Basic Salary 5 Hours Overtime per Week @ 1.5x Approx. Additional Earnings: £7,400 per year Total Earnings: £49,400+ 10 Hours Overtime per Week @ 1.5x Approx. Additional Earnings: £14,800 per year Total Earnings: £56,800+ As a Field Service Engineer, you will work from home attending customer sites throughout your designated territory, carrying out planned maintenance, servicing and breakdown repairs on a range of forklift trucks and material handling equipment. • Servicing and maintaining forklift trucks, • Diagnosing electrical, hydraulic and mechanical faults, • Attending breakdowns and carrying out reactive repairs, • Completing planned preventative maintenance (PPM), • Repairing (Diesel, Petrol, LPG, Electric) engines, drive systems, hydraulics and electrical components, • Recording all work completed via engineer reports, • Managing your workload efficiently while maintaining high standards of workmanship This business is committed to developing its engineers and regularly invests in manufacturer-led and industry-recognised training. • Manufacturer-specific forklift training, • Advanced fault-finding and diagnostics, • Electrical systems training, • Hydraulic systems training, • Battery and charging technology courses, • Health & Safety certifications, • Senior Engineer development programmes, • Leadership and management training Whether you're joining as an experienced Forklift Engineer or transferring from another mobile engineering sector, a structured development plan will be provided to support your progression. We're keen to speak with engineers who have experience maintaining, servicing or repairing mobile machinery and equipment. • Forklift Engineer, • Plant Fitter, • Plant Engineer, • Agricultural Engineer, • Powered Access Engineer, • HGV Technician, • Construction Equipment Engineer, • Strong mechanical fault-finding skills, • Good hydraulic and electrical knowledge, • Experience working on engines and mobile machinery, • Ability to work independently, • Full UK Driving Licence Keywords: Forklift Engineer, Field Service Engineer, Mobile Engineer, Plant Fitter, Plant Engineer, Agricultural Engineer, Service Technician, Mechanical Engineer, Electrical Engineer, Material Handling Engineer, Workshop Engineer, Powered Access Engineer, Maintenance Engineer #J-18808-Ljbffr

• Full-time, • State/Province: London, City of, • Business Group: DCS, • Legal Entity: AECOM Limited, • Business Line: B&P - Buildings & Places, • Work Location Model: Hybrid, • Operating Group: International, • Primary Location: UK - Croydon, 69 Park Lane At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Our Data Centre MEP team comprises a highly skilled network of Associates, Principals, Senior Engineers, Engineers, and Graduates located across our UK offices. We are a close-knit and collaborative team delivering some of the world's most technically advanced data centre projects. Working alongside multidisciplinary specialists in architecture, civil and structural engineering, project management, cost consultancy, sustainability, environmental services, acoustics, transportation, planning and landscape design, we support global hyperscale and colocation clients at the forefront of digital infrastructure. We are seeking an accomplished Technical Director to provide technical leadership across our expanding Data Centre practice. This is a strategic role for an industry expert with significant experience in the design and delivery of mission-critical facilities who can drive technical excellence, lead major client relationships, and help shape the growth of our data centre business across the UK and internationally. The successful candidate will combine deep technical expertise with strong commercial awareness, leadership capability, and a passion for developing teams while delivering innovative solutions for complex mission-critical projects. • Act as a technical authority across major hyperscale and colocation data centre projects., • Lead the development of innovative engineering solutions that support resilience, operational efficiency, sustainability, and future scalability., • Provide strategic technical oversight and governance throughout all project stages, ensuring consistent quality and compliance with industry standards., • Lead complex feasibility studies, design reviews, technical due diligence exercises, and client advisory commissions., • Oversee project delivery, commissioning strategies, and operational readiness activities, ensuring successful outcomes for clients and stakeholders., • Serve as a trusted advisor to major global data centre clients, contractors, developers, investors, and operators., • Build and maintain senior-level relationships across key client accounts, identifying opportunities for growth and long-term partnerships., • Represent the business externally through industry networks, conferences, technical presentations, and thought leadership initiatives., • Support bids, proposals, and strategic pursuits by providing technical leadership and market insight., • Lead, mentor, and develop multidisciplinary engineering teams, fostering a culture of technical excellence, collaboration, and innovation., • Champion knowledge sharing, professional development, and best practice across the wider Data Centre and Building Services teams., • Support recruitment, succession planning, and capability development initiatives., • Help shape the strategic direction of the Data Centre practice and contribute to long-term business planning and growth., • Promote a strong Safety, Health & Environmental culture across all projects and teams., • Ensure compliance with relevant legislation, standards, and company procedures., • Provide leadership in resolving complex engineering challenges while maintaining the highest levels of quality assurance., • Work closely with multidisciplinary teams to deliver integrated and coordinated design solutions., • Support the adoption of emerging digital technologies, sustainable design approaches, and innovative engineering solutions within mission-critical environments., • Travel nationally and occasionally internationally to project sites, client meetings, and offices as required., • Degree qualified in Electrical Engineering, Mechanical Engineering, Building Services Engineering, or a related discipline., • Chartered Engineer (CEng) status through the IET, CIBSE, IMechE, or an equivalent professional institution., • Extensive post-qualification experience in building services, mission-critical facilities, industrial infrastructure, or data centre engineering., • Demonstrable experience leading the design and delivery of complex, multidisciplinary engineering projects., • Strong understanding of data centre infrastructure, resilience strategies, sustainability objectives, and operational requirements., • Proven track record of leading engineering teams and delivering major programmes for global clients., • Excellent knowledge of relevant industry regulations, standards, commissioning requirements, and best practice methodologies., • Strong commercial awareness with experience supporting business development, client engagement, and proposal activities., • Exceptional communication, stakeholder management, and leadership skills., • Significant experience within the data centre sector, particularly hyperscale and colocation environments., • Experience advising data centre operators, developers, investors, or major contractors., • Experience delivering large-scale, international or multidisciplinary projects., • Exposure to digital engineering, sustainable design methodologies, and emerging technologies within the built environment., • Full UK driving licence., • Valid passport and willingness to travel nationally and internationally as required., • Ability to obtain Security Clearance where project requirements necessitate this. To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment. AECOM is the world’s trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $16.1 billion in fiscal year 2025. See how we are delivering sustainable legacies for generations to come at aecom.com and @AECOM. You will have the flexibility you need to do your best work with hybrid work options.Whether you’re working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed. You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients. AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. Join us, and you’ll get all the benefits of being a part of a global, publicly traded firm – access to industry-leading technology and thinking and transformational work with big impact and work flexibility.As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. We are aDisabilityConfidentEmployer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address ReasonableAccommodationsUKI@aecom.com if you would like to apply through theDisabilityConfidentInterview Scheme. All your information will be kept confidential according to EEO guidelines. #J-18808-Ljbffr

Mott MacDonald is a global engineering, management, and development consultancy with over 20,000 employees across more than 50 countries and 140+ offices. We work across incredible global industries, delivering exciting work that is defining our future and making an important societal impact in the communities we serve. Our people power our performance – we succeed when they do. With countless opportunities to collaborate, learn, and grow, the possibilities for excellence are as varied as every individual. Whether you want to grow as a subject matter expert or broaden your experience with roles across our international community, you’re surrounded by global specialists who want to combine their expertise and champion you to be your best. As a proudly employee-owned business, we benefit our clients, our communities, and each other, investing in creating the right space for everyone to feel empowered, included, and valued. Whatever your ambition, Mott MacDonald is where people come to be brilliant. We help conceive, drive, and implement transport solutions for cities, regions, and asset owners/operators around the globe. From preparing the business case and advising on related issues - such as revenue, procurement, and environmental legislation - to delivering the completed infrastructure and helping maintain it. Our planning, engineering, environmental and management skills cover the whole project cycle. We play a major role in developing and delivering the Global Transport Sector Strategy. Our Tunnels team is one of the global leaders in tunnel planning, design and construction in all conditions from soft ground to hard rock. Having planned and designed numerous road, rail, metro, water and service tunnels across the globe including HS2, London’s Thames Tideway East Tunnel, Northern Line Extension and Crossrail, we continue to be involved in many of the most challenging civil/structural and tunnel, underground works and hydro-electric engineering projects. We are currently looking to recruit an industry leading Technical Director to join our Croydon office to reinforce and grow our regional capability as an important addition to our UK and Global Tunnelling Team. You will provide technical leadership, strategic direction and assurance for complex tunnelling and underground infrastructure projects globally. You will act as a recognised authority in tunnelling, driving excellence in design, delivery, and client outcomes while supporting business growth and capability development. Ideally, we are looking for someone who can support our current focus on innovation in the digital space. As a senior member of the Croydon Tunnel Team, you will support the Tunnel Leadership team in the pursuit and delivery of underground infrastructure projects across multiple markets. A significant proportion of the work is expected to be with design-and-build contractors. The portfolio of projects will include design of both transportation and utility tunnels. You will provide design and integration with other engineering disciplines including structural, geotechnical, environmental, mechanical and electrical engineers covering a range of project requirements from new build to modification, asset maintenance or refurbishment. • Technical Leadership & Assurance, • Act as Technical Authority for tunnelling and underground works (TBM, NATM/SCL, shafts, stations, immersed tunnels, etc.), • Provide independent technical review and assurance on major projects and bids, • Set and uphold engineering standards, design methodology, and best practice in line with Mott MacDonald procedures, • Lead resolution of complex technical challenges and risk mitigation strategies, • Project Delivery & Design Leadership, • Act as Technical Lead / Design Director / Discipline Lead on major programmes, • Oversee multidisciplinary integration (geotechnical, structures, MEP, fire/life safety, construction sequencing), • Ensure delivery of safe, buildable, and cost-effective solutions, • Support project teams in value engineering and innovation, • Client Leadership & Work Winning, • Serve as a trusted advisor to clients, providing expert guidance on tunnelling strategy and delivery, • Lead technical input into bids, proposals, and presentations, • Support account teams in securing major infrastructure projects (metros, rail tunnels, highways, utilities), • Represent Mott MacDonald externally at industry forums (e.g. BTS, ITA), • Strategic Capability Development, • Develop and grow tunnelling capability within the Croydon Team, • Mentor and develop Principal Engineers and emerging leaders, • Identify and implement innovation, digital engineering, and new methodologies, • Contribute to technical excellence initiatives and knowledge sharing, • Governance & Risk Management, • Act as a Design Approver / Checker / Reviewer on high-risk projects, • Ensure compliance with:, • Quality management systems (QMS), • Health, safety, and CDM requirements, • Client and regulatory standards, • Provide oversight on technical risk registers and assurance processes, • Technical quality and robustness of tunnelling designs, • Successful delivery of technically complex projects, • Contribution to work winning and revenue growth, • Development of internal capability and technical reputation, • Client satisfaction and repeat business, • Degree in Civil Engineering or related discipline (Chartered Engineer – ICE or equivalent), • Demonstratable significant experience in tunnelling/underground infrastructure, • Strong expertise across:, • Tunnel design (TBM, SCL/NATM, cut-and-cover, immersed tunnels), • Ground engineering and geotechnics, • Construction methods and sequencing, • Ideally experience in digital delivery of design solutions, • Track record of leadership on major infrastructure programmes (e.g. metros, rail, water, highways), • Active participation in industry bodies (e.g. British Tunnelling Society, ITA), • Deep technical expertise in tunnelling and underground design, • Strategic thinking and client advisory skills, • Leadership of multidisciplinary teams, • Commercial awareness and bid leadership, • Strong communication and influencing ability Mott MacDonald Ltd. are not currently offering sponsorship to candidates under the Skilled Worker visa route in the UK. This decision is as a consequence of the changes made to the Skilled Worker route by the UK Government in April 2024. We continue to welcome applications from candidates who are eligible for alternative immigration routes in the UK, that do not require sponsorship as a Skilled Worker now or in future. At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team, and personal commitments. We offer a hybrid working policy that embraces your well-being, flexibility, and trust. We put equality, diversity, and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they can contribute. At Mott MacDonald, we see the value AI can bring, but we take a people-first approach to hiring. While AI tools can help candidates prepare and build confidence, every application and hiring decision is reviewed by our recruitment and hiring teams. We encourage the responsible use of AI while ensuring we get to know the real person behind the application. We want you to feel supported and able to perform at your best throughout our recruitment process. If there is anything we can do to make applying or interviewing with us more accessible, please contact us at reasonable.adjustments@mottmac.com and we'll be happy to discuss how we can help. • We match employee pension contributions between 4.5% and 7%., • Life assurance equal up to 4 x your basic salary, with an option to increase the level of cover to 6 x your salary., • Our income protection scheme provides a financial benefit, as well as absence and return to work support due to long-term illness or injury., • Flexible benefits, including increased life assurance cover, critical illness insurance, payroll saving and will writing., • As an independently owned business we share the financial success of the business with all our colleagues in various ways including annual bonus schemes., • Our employee ownership model means no external investors, just us, creating a culture of shared success., • Our employees have a stake and a voice in our business, giving them a direct connection to our success through our personal and group performance bonuses., • As your career grows, so does your stake, recognising your long-term impact and contribution., • Your voice matters, with the opportunity to connect directly with senior leadership through formal channels to help shape our future., • For our senior roles you will have a direct pathway towards ownership from day one., • Private medical insurance for all UK colleagues., • Health cash plan to support you with every day health costs and treatments., • Access to Peppy, providing free support from menopause experts for all UK colleagues., • A variety of wellbeing support is available through our comprehensive wellbeing program, including access for you and your family., • Ability to flex your salary to opt into a wide range of health benefits, many of which can be extended to your family too., • A minimum of 33-35 days holiday each year, inclusive of public holidays and dependent on level, with the ability to buy or sell leave through our flexible benefits programme., • 10 days additional paid leave for Armed Forces Reservists and Cadet Force Adult Volunteers., • Holiday entitlement increased to a minimum of 35 days after 5 years’ service., • Variety of employee saving schemes and discounts from high-street retailers., • Enhanced family leave policies, including 26 weeks paid maternity and adoption leave, and two weeks paid paternity/partner leave., • Our shared parental leave matches maternity leave meaning we pay up to 24 weeks at full pay., • Up to five additional days leave are provided for those with significant caring responsibilities, two of which are paid., • We offer policies and dedicated support to help military families balance service life with career and wellbeing., • Primary annual professional institution subscription., • A broad range of opportunities to enhance both technical and soft skills through mentoring, formal training, and self-development options., • Join a wide range of groups including our Advanced Employee Networks which support our LGBTQ+, gender, race and ethnicity, disability, and parents/carers communities., • We are proud signatories of the Armed Forces Covenant and Gold Award holders in the MOD Employer Recognition Scheme, supported by our dedicated internal Armed Forces Network., • Make a difference within our communities through our social outcomes. #J-18808-Ljbffr

Job Title: Principal Design Engineer - Primary Reporting to: Principal Design Engineer/Head of design. The Principal Design Engineer will responsible for managing and leading projects. A thorough understanding of managing project delivery to quality, cost and programme deliverables. Manage and deliver single- and/or multi-disciplinary projects to cost, schedule and quality criteria. Lead aspects of infrastructure design, work as lead designer on a range of project sizes, appropriate to their experience. The Principal Design Engineer is a key member of the Design Management team. You will assist the Design Manager to ensure technical compliance, quality, and successful delivery of a portfolio of design projects Generating Primary designs and working with other Omexom Engineers in converting these designs into working drawings as part of a wider design team. Have significant knowledge and experience of legislation required in this industry and implement it as required. Works to own initiative and will be required to supervise design and graduate engineers and trainees. The principal design engineer will provide appropriate levels of Primary design to a range of different Primary elements as required by the BUGM and their reports. Possesses an advanced level of skill and understanding and is able to perform all parts of the task satisfactorily and make judgements and decisions correctly in a variety of situations. Can check work at the highest level. To be responsible for input into IET/ IMechE training scheme as required and to support graduates. Will contribute to the development and mentoring a range of staff grads ranging from graduates through to principal designers. Including but not limited to the following: • Day to day management of a design team, • Undertake checking of design deliverables., • The review and cascading of current industry standards., • The Safety, Health and Environmental awareness of all design staff., • The quality of ALL design submissions., • Discharging the responsibilities of the Designer under the 2015 CDM regulations including the principles of prevention., • Where required act as Principal Designer under CDM 2015, leading and coordinating the pre-construction phase to ensure risks are identified, mitigated and managed, and that all duty holders fulfil their statutory health and safety responsibilities., • The promotion and enforcement of company procedures to design staff., • The review of method statements/risk assessments, • The development and implementation of new industry software where applicable., • Ensure design deliverables are met and to report on performance to the Head of design or their associates., • Promote safe by design principles, consider sustainability and low carbon options., • Responsible and to lead detailed design and calculations in accordance with the relevant standards and procedures, under the direction of the head of design or their associates., • May assume the role of Lead Design Engineer (Lead Contractor Design Approval Engineer for LCDAE for NG) on large or complex projects as well as smaller projects as required., • May assume the role of Contractor Design Approval Engineer (CDAE) for NG Projects., • Provide independent design assurance and approval of contractor-produced engineering deliverables, ensuring compliance with applicable client standards, industry regulations, and project-specific technical requirements; coordinate specialist input across key disciplines (e.g. plant, protection, and control) or undertake a combined approval role where appropriately authorised., • Assist the Design Manager with appointing and provide training where necessary and manage design staff in an efficient manner., • Business development with DNOs and TSOs, including prospecting, tendering and delivering design services., • Assist with the production of design tools and production and review of internal procedures., • Excellent level of understanding of relevant British Standards and Eurocodes with regard to Primary, design and specification., • Work closely with other members of the design team to deliver safe, efficient and buildable solutions., • Collaborate with engineers and technicians from other disciplines, including external consultants where necessary., • Coordinate with site construction teams, principal designers (2015 CDM) and temporary works coordinators and support constructability reviews., • Support tender and tender preparation for projects of all varying sizes including fee estimates., • Provide support to CAD staff and trainees in their professional development., • Ensure thorough checking and accuracy of deliverables., • Manage and keep records in accordance with company QA procedures., • Have responsibility for maintaining calculation and drawing records., • Participate in lessons Learnt and knowledge share workshops and share across the organisation and design team., • Attend in-house design courses and seminars and feedback to the rest of the department if required., • Keep up to date with IET /IMechE CPD requirements., • Report to management team as required., • Excellent team ethic, and ability to work extended hours on occasions when required., • Represent Omexom – Design in external project technical meetings if required., • Represent Omexom – Design in external events and site visits if required., • Develop positive relationships with customers through good professional conduct., • Review specialist subcontractors/suppliers production calculations and drawings for technical compliance with design intent., • Ability to work accurately and methodically under pressure and strict deadlines, including the ability to juggle multiple tasks., • Excellent time and cost management skills to ensure cost effective and accurate delivery., • Effectively manage own time, and others within small teams across multiple projects and prioritise workload., • Good communication style and interpersonal skills., • Ability to work accurately and methodically under pressure and to strict deadlines, including the ability to manage multiple tasks., • Ability to work well within a team of other professionals in delivering designs to satisfy the agreed brief. (e.g: Primary Engineers, OHL, Kelvin Power, Temp works designers), • Strong communication style and interpersonal skills, with the ability to influence and negotiate internally and within a team., • Supervision, technical mentoring and staff development skills., • Complete Codex timesheets accurately and in good time, ensure your team are also completing the timesheets accurately., • Keep an excellent team ethic with the ability to work extended hours on occasions when required., • Achieve a firm level 3 competency and have met several attributes at level of 4 Competency Matrix “Expert level of skill and understanding. Is able and willing to take initiative and develop new processes and efficiencies. Can check work.” Relationships with key stakeholders: • Business Unit General Managers, • Finance Business Partner, • Design Delivery Manager, • Design Engineers (Graduate, Design, Senior, Lead designer, Principal), • Engineering Manager, • Temporary Works designers and Coordinators., • Client Representatives, • Project Managers, • Site Manager., • Estimating and Planning Engineers, • External stakeholders, e.g. client, authorities Qualifications and experience The jobholder shall hold a degree in Electrical Engineering, or a holder of degrees suitable to be either an Engineering Council (EngC) Incorporated Engineer (I.Eng) or Chartered Engineer (C.Eng) with one of the relevant Professional Engineering Institutions (PEI’s) such as Institution of Civil Engineers, Institution of Engineering and Technology, Institution of Mechanical Engineers. … and possess: • Mandatory Omexom training courses., • Must have a detailed understanding of the latest OHL design practices, standards and analysis software systems., • Preferable BSc/BEng in Electrical Engineering with 7-10 Years OHL design and construction industry experience, • Full Uk Driving Licence., • 6-10 years experience on significant value schemes as a designer., • Principal Designer experience, • Principal Design Engineer to be minimum Incorporated Engineer (I.Eng with the IMechE or IET), but the preference for a Principal engineer would be fully chartered. (C.Eng)., • Attend National Grid Persons Course, • CSCS card as Academically qualified person (AQP) / Safety Passport or equivalent Required skills, knowledge, and abilities: • Working knowledge and experience of the 2015 CDM Regulations including Principal Designer requirements and namely Regulations 8 and 9., • Discharge the responsibilities of Designer under the 2015 CDM Regulations, and ensure a comprehensive Designers Risk Assessment undertaken for all Projects., • Promote and enforcement of company procedures to Design staff., • Knowledge of current UK technical standards and legislation requirements., • Knowledge and understanding of typical construction materials used in the UK such as timber, concrete, reinforced concrete and its limitations., • An eye for detail when undertaking specific tasks, and the effect of their use/implementation to the wider project. Is the design suitable and constructable?, • High level of proficiency of Microsoft office software., • To engage and use various design software programs such as AutoCAD, Revit. To have an excellent level of understanding., • A good working understanding of document control processes and be familiar with ISO 19650 for BIM., • High Level proficiency in the use of AutoCad 2D and 3D, • A good knowledge in the production and review of technical specifications., • Proven track record of project delivery and client satisfaction., • Experienced and competent in leading varying sizes of project teams., • Full understanding and delivery of assurance/sign off requirements., • Technically competent in all aspects of Infrastructure design and co-ordination., • Ability to produce CDM as-builts and input and produce the health and safety file, where appropriate., • Support design delivery manager and from time to time undertake this role as required., • Good communication skills., • Awareness of own limits and ability to embrace change., • Flexible and open minded., • Ability to manage and accurately control and record change with the ability to coordinate and design change control and notify with early warnings., • Report on cost of poor quality, through NCR’s and change records., • Reliable team leader that strives for continual improvement., • A high level of attention to detail., • Undertake Design Project peer reviews., • Provide technical support to the construction team. In line with Omexom’s values, the jobholder must have the following qualities: • Team Spirit & Generosity – able to work effectively within and contribute to the Omexom team to deliver results, provide support and drive performance., • Trust and Empowerment – enjoy managing their responsibilities and time to ensure work is completed efficiently and professionally., • Integrity and Responsibility – enjoy taking responsibility for their duties and managing these effectively to ensure efficient high quality results., • Innovation & Entrepreneurship – continually strive to improve processes and introduce new initiatives to improve efficiency. #J-18808-Ljbffr

Field Service Engineer - Bespoke Equipment Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Your day starts when you start your vehicle! Day shifts – no lates Are you ready to go on the road and take your technical skills to a dedicated network of customer sites? If so, then this could be the role for you? In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV's, Ground Support GSE, Refuse Collection Vehicles, Gritters, Sweepers, Light Commercials We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing: Callouts Preventative Maintenance Emergency Breakdowns Pre-arranged servicing at rural sites MOT Preparation Engine work and diagnostic investigations Correction of running defects Chassis and fabrication work Hydraulics and pneumatics Improvement of vehicle standards Electrical and wiring inspections and corrections Your industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required. A Class 2 Licence would be beneficial. You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship. Benefits – you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme. If this role isn't for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop. A problem solver with a can-do mindset Abiding by health and safety rules You will be travelling within an area of North London and Essex We require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completion The personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible; Reliable and punctual Enthusiastic, proactive and an innovative thinker TPBN1_UKTJ

BGIS is seeking a Mechanical Building Services Engineer to join our team in Croydon. You will deliver PPM and reactive maintenance across mechanical building services, ensuring safe, compliant, and efficient operations in a client-facing environment. The role covers HVAC, pumps, piping, water services and associated plant, with responsibilities for fault finding, repairs, and continuous improvement. Strong knowledge of health and safety and CAFM experience preferred. #J-18808-Ljbffr

Building Services Maintenance Engineer (Mechanical Bias) Surrey £25-£30 per hour (flexibility available for the right candidate) Monday to Friday | 07:00am - 3:30pm Long-Term Contract Opportunity We are currently recruiting for an experienced Building Services Maintenance Engineer to join a busy healthcare environment in Surrey on a long-term contract basis. This role would suit a mechanically biased engineer with a strong background in building services, facilities maintenance, estates, healthcare, commercial buildings, or other critical environments. The successful candidate will play a key role in ensuring the safe, compliant and efficient operation of the site's engineering services and infrastructure. • Daily plant room inspections and operational checks, • Monitoring and controlling temperature and humidity levels, • Planned Preventative Maintenance (PPM) activities, • Reactive maintenance and fault finding across building services systems, • Fire alarm testing and support with fire safety compliance, • Monitoring building performance and assisting with energy efficiency initiatives, • Liaising with specialist contractors and managing site attendance, • Reporting engineering and compliance issues to site management, • Maintaining accurate maintenance records and compliance documentation, • Supporting out-of-hours call-out requirements when necessary, • Ensuring engineering services remain safe, compliant and operational at all times, • Recognised Mechanical Engineering apprenticeship or equivalent engineering qualification, • Previous experience within Building Services, Estates, Facilities Maintenance or Healthcare Engineering, • Strong knowledge of plant rooms, HVAC systems, pumps, motors, boilers and general mechanical building services, • Experience carrying out both planned and reactive maintenance, • Good understanding of statutory compliance and health & safety regulations, • Ability to work independently and communicate effectively with contractors, colleagues and site stakeholders, • Previous healthcare or critical environment experience would be advantageous but is not essential, • Long-term contract opportunity, • Competitive hourly rate of £25-£30 per hour (negotiable), • Monday to Friday days-based role, • Supportive engineering team and established site, • Opportunity to work within a professional healthcare environment #J-18808-Ljbffr

Location: Croydon We are seeking a Mechanical Building Services Engineer to join our team in Croydon. The successful candidate will be responsible for delivering planned preventative maintenance (PPM), reactive maintenance, fault finding, and repairs across a range of mechanical building services systems. The role requires a strong understanding of commercial building services, with a focus on maintaining safe, efficient, and compliant operations within a customer-facing environment. • Carry out planned preventative maintenance (PPM) on mechanical building services plant and equipment in accordance with maintenance schedules and statutory requirements., • Undertake reactive maintenance and fault-finding activities on building services systems, ensuring minimal disruption to operations., • Maintain and repair mechanical systems including HVAC equipment, pumps, pipework, water services, heating systems, pressurisation units, expansion vessels, and associated plant., • Perform minor plumbing works, including repairs to sanitaryware, pipework, valves, and water systems., • Monitor plant performance and proactively identify areas for improvement, reliability enhancement, and energy efficiency., • Ensure all plant faults and defects are diagnosed and rectified promptly., • Support the operation and monitoring of Building Management Systems (BMS) where required., • Liaise with specialist subcontractors and supervise their activities on site to ensure compliance with site requirements and safe systems of work., • Administer contractor permits, work approvals, and safe isolation procedures where required., • Operate Permit to Work and Lock Out Tag Out (LOTO) systems in line with company and client procedures., • Ensure all maintenance activities are completed in accordance with Health & Safety legislation and company procedures., • Prepare and follow suitable Risk Assessments and Method Statements for all tasks undertaken., • Complete all relevant maintenance documentation and accurately update the Computer-Aided Facilities Management (CAFM) system, ensuring PPM and reactive tasks are closed out promptly., • Provide material requirements, parts lists, and estimated timescales for remedial works., • Maintain plant rooms, workshops, and engineering areas in a safe, clean, and orderly condition., • Build and maintain positive working relationships with colleagues, subcontractors, and client representatives., • Ensure compliance with contractual KPIs and SLAs., • Promote a positive safety culture by producing near miss reports, undertaking dynamic risk assessments, and challenging unsafe behaviours where identified., • Wear company uniform and PPE at all times and maintain a professional image when representing BGIS., • Support the wider engineering team and undertake any other duties reasonably requested by site management., • Recognised mechanical or plumbing apprenticeship, NVQ Level 3, City & Guilds, or equivalent qualification in Mechanical Engineering, Plumbing, or Building Services., • Proven experience within commercial building services maintenance., • Strong fault-finding and problem-solving skills across mechanical plant and equipment., • Good understanding of HVAC systems, heating systems, water services, pumps, and associated mechanical plant., • Knowledge of health and safety legislation and safe systems of work., • Experience using CAFM systems such as Maximo, Concept, or similar., • Ability to work independently and as part of a team., • Strong communication and customer service skills., • Water Hygiene awareness or L8 experience., • BMS monitoring experience., • F-Gas qualification., • Experience within corporate offices, commercial properties, or critical environments., • First Aid, IPAF, or PASMA certification. This role offers an excellent opportunity for a skilled Mechanical Building Services Engineer to join a professional facilities management environment and contribute to the safe and efficient operation of a prestigious site. At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognize that promoting diversity is an essential component of our continuing pursuit for organisational success! #BGISUK #J-18808-Ljbffr

Hozah is a tech-led, award-winning company driving change in the parking industry and reimagining urban mobility. Our mission is simple but powerful: to transform parking into a seamless, automated experience, paving the way for smarter, more sustainable cities. With recognition as PayTech Company of the Year, a place among Deloitte’s Top 50 Fastest Growing Tech Companies in the UK, and significant VC/PE investment, we’re scaling rapidly and need a skilled Mobile Site Engineer to look after our growing estate from Manchester southwards. We are seeking a hands-on and proactive Mobile Site Engineer to manage the maintenance and overall health of our car park infrastructure from Manchester southwards, ensuring that downtime on sites due to equipment failure is kept to a minimum. You’ll be responsible for the ongoing maintenance of existing sites and the coordination of subcontractors to keep operations running seamlessly. The role calls for a mix of technical expertise, knowledge of CCTV/ANPR cameras and a problem-solving mindset, with regular site visits to either oversee or carry out maintenance work. This is a field-based role covering our southern estate, from Manchester southwards and down to the South West, including St Austell in Cornwall. The ideal candidate will be based within this area and must be able to travel regularly to sites across all of our southern locations. We also have a North equivalent of this role, so there may be the odd occasion where you’re asked to cover sites further north. We’re flexible on working hours where long journeys are involved, and travel time will be factored in where necessary. Equipment maintenance: Maintain ANPR cameras, Pay & Display machines, tablets, signage and other related equipment. RAMS: Ensure Risk Assessments and Method Statements (RAMS) are prepared and followed when on site. Signage & frontline maintenance: Install and replace signage and kiosk consumables as required, ensuring compliance with safety and operational standards. Issue resolution: Diagnose and resolve technical issues on site, ensuring all equipment functions optimally. Compliance & safety: Adhere to all safe working procedures and compliance guidelines, ensuring a safe and effective work environment. Site visits: Visit sites from Manchester southwards on a scheduled basis to carry out general site health checks. Proactive monitoring: Plan and execute regular site visits and maintenance schedules across the southern estate to maintain a high-quality estate. Subcontractor coordination: Coordinate subcontractors on site to ensure maintenance and project work is delivered on time. Background in hands-on installation, ideally from companies or industries such as Sky, CCTV, BT, Field IT or IoT-related roles. (ANPR experience is beneficial but not required.) Experience working with subcontractors to ensure projects meet deadlines. Ability to work independently, making on-the-spot decisions to meet project objectives. Experience producing site documentation, such as site maps and install plans. Comfortable working alone, following installation plans and survey documents. Strong problem-solving skills, with the ability to multitask and adapt to dynamic site conditions. Based within our southern area (Manchester southwards), and able to travel regularly across all of our sites, as far as St Austell in Cornwall. Full, clean UK driving licence (essential). Basic knowledge of Risk Assessments and RAMS documentation. Asbestos Awareness Abrasive Wheels Certification Working at Height Certification Ladder Safety Training Health & Safety Awareness C&G 2365 (Electrical Installation) CAT & Genny Training IPAF (Powered Access Equipment) Competitive salary & benefits: Reflective of your experience and designed to support your professional growth and well-being. Company van for site travel. Company pension, sick pay and on-site parking. Flexible, home-based working: Split your time between home, our sites and our Croydon office. At Hozah, you’ll play a pivotal role in a purpose-driven company at the forefront of urban mobility innovation. We foster a culture of collaboration, creativity and positive impact, where your contributions help shape the future of smarter cities. If you’re looking to make a real difference in transforming the future of mobility, we’d love to hear from you. Join us and be part of this exciting journey! Job type: Full-time Schedule: Monday to Friday Location: Field-based, Manchester southwards, including the South West as far as St Austell (ideally based within this area) Hozah does not offer visa sponsorship for this role; applicants must have the right to work in the UK. #J-18808-Ljbffr

Hours: Monday to Friday 40 - 50 hours Monday to Friday Posted Date: September Radnes is a specialist forklift and materials handling support company providing hire, service, inspections and technical services to businesses throughout the UK trading for over 50 years. Focused on delivering exceptional customer service, we help customers extend equipment life, improve reliability and keep their operations moving. Our aim is simple: to provide national capability with the service quality, responsiveness and personal relationships of a local family business. As part of The Bennie Group, a family-owned business with over 90 years of history, Radnes offers employees the opportunity to be part of an ambitious and growing organisation where teamwork, customer focus and continuous improvement are at the centre of everything we do. On site working hours are 06:00am to 16:00pm with 30-minute unpaid lunch. The first 30-minutes of travel each way will be completed outside of these shift times. You are also required to work such additional hours as may be necessary for the proper performance of your duties or that may be required to fulfil your role. As a Field Service Engineer, you will be responsible for the inspection, servicing, maintenance, repair and commissioning of materials handling equipment at customer sites. You will play a key role in keeping customers’ operations moving by delivering safe, reliable and high-quality technical support, while representing Radnes and The Bennie Group in a professional, customer-focused manner. • Carry out planned servicing, preventative maintenance, inspections, fault diagnosis and repairs on forklifts and other materials handling equipment at customer sites., • Diagnose mechanical, hydraulic and electrical faults, identifying effective repair solutions that minimise customer downtime., • Repair or replace faulty parts safely and efficiently, ensuring all work is completed to the required technical and quality standards., • Request parts accurately via tablet and keep customers and the Service Team informed where follow-up work is required., • Complete job reports, service records, inspection documentation and compliance paperwork accurately and on time., • Work closely with the Service Co-ordinator and Service Manager to manage scheduled work, priorities, call-outs and customer commitments., • Build and maintain positive customer relationships by communicating clearly, working respectfully on site and delivering a reliable service experience., • Follow all Radnes, Bennie and customer site procedures, including quality, compliance, environmental and operational requirements., • Take personal responsibility for health and safety, ensuring work is completed safely, professionally and in line with company procedures., • Maintain and develop technical knowledge through training, manufacturer guidance and continuous professional development. The above list of responsibilities is not exclusive or exhaustive. The post holder may be required to undertake other reasonable tasks within the scope of the role, in line with their skills, experience and business needs. • Relevant engineering experience or qualification, such as NVQ, City & Guilds or equivalent practical experience., • Strong mechanical aptitude, with the ability to diagnose faults and complete repairs safely and effectively., • Good numeracy and literacy skills, with the ability to complete accurate reports and service documentation., • Analytical, practical and detail-focused approach to problem solving., • Excellent communication skills, with the confidence to deal professionally with customers and colleagues., • Able to work independently in the field while remaining well organised and accountable to the wider Service Team. Be on time and put in the graft to support customers when they need it most to keep their fleet moving., • Flexible, reliable and willing to support colleagues when operational priorities require it., • Full UK driving licence., • Experience within the materials handling, forklift, plant, agricultural, automotive or similar engineering sector., • Knowledge of forklift trucks, LOLER/PUWER requirements and safe working practices on customer sites., • Good working knowledge of tablets, digital job systems and Protean or similar service management software., • Electrical or hydraulic diagnostic experience., • Remuneration: We offer a competitive salary, depending on experience. Incentives* and overtime are available, with overtime paid at x 1.5., • Vehicle: Company van and fuel card., • Referral: Employee Referral Bonus* of £1000.00, • Development: We are committed to investing in our people, so we invest in you. Development is in your hands, and we want to enable this so your progression at Bennie is only limited by what you want to achieve., • Bennie Clothing: PPE as standard, Workwear is also provided*., • Socials: Join us for our summer and winter social events., • Finally: Our long-standing family tradition of giving staff a Christmas turkey. *Additional terms and conditions apply Part of The Bennie Group A family of great companies Cranford Road Burton Latimer Northamptonshire NN15 5TB #J-18808-Ljbffr

• Online strengths-based assessment, • Application form CVs and cover letters are not required as part of the application process. Candidates will be assessed through a single-stage strengths-based interview. Start your career with a global, employee-owned consultancy where your work can make a real difference. At Mott MacDonald, you'll work alongside experts, contribute to meaningful projects, and have the support, learning opportunities, and experience needed to grow your career from day one. At the heart of every resilient building and transport system lies a commitment to safety, innovation, and integrity. Our fire engineering team is driven by a shared purpose: to protect lives, enhance infrastructure, and contribute to a safer, more sustainable world. We believe fire engineering is more than a technical discipline - it’s a vital investment in the wellbeing of communities and the future of our built environment. Whether designing iconic buildings or complex transport systems, we challenge conventional approaches to deliver bespoke, dynamic fire safety solutions that are as innovative as the projects themselves. As a graduate fire engineer, you’ll play a pivotal role in shaping fire strategies that safeguard people and assets. You’ll collaborate with multidisciplinary teams to develop life safety systems, firefighting provisions, and technically advanced fire-engineered solutions tailored to each project’s unique goals. In this role, you will: • Shape the future of safety by developing fire strategies using both dynamic simulations and prescriptive codes., • Collaborate with top-tier clients and design teams, translating complex project needs into clear, trusted fire safety advice., • Influence cutting-edge designs to embed fire strategy solutions that are practical, innovative, and performance-driven., • Get hands‑on experience with site visits and technical assessments that bring your recommendations to life., • Explore the science behind fire dynamics using fire modelling and advanced tools to predict behaviour and support robust fire strategies., • Work globally, applying your expertise across diverse sectors, from high‑rise buildings and infrastructure to energy, transport, and nuclear We’re proud of our award‑winning reputation and the trust our clients place in us. But what truly sets us apart is our culture - one that celebrates collaboration, values diversity, and prioritises wellbeing. Here’s what you can expect: Growth & Development: From mentorship to technical training, we invest in your personal and professional journey. Inclusive Culture: We welcome diverse perspectives and foster an environment where everyone feels seen, heard, and valued. Team Spirit: You’ll be part of a supportive, caring team that works together to solve complex challenges and celebrate shared successes. Purpose & Impact: Your work will contribute to safer hospitals, transport hubs, military installations, and more - projects that matter to society. Integrity & Trust: We uphold the highest standards of ethics and transparency in everything we do. We have opportunities in our Croydon and London offices. At Mott MacDonald, we’re looking for curious, motivated graduates who want to make a real difference. Join our purpose‑driven teams where your ideas matter, your growth is supported, and your work enhances the world we live in. To be eligible for this opportunity, you will have less than 12 months’ relevant experience (excluding placements) and have a minimum of a bachelor’s degree (obtained no earlier than 2025) or expected to achieve one of the following degree disciplines: • Fire Engineering, • Fire Science or similar, • Mechanical Engineering, • Architectural Engineering, • Building Services Engineering, • Chemical Engineering, • Physics, • Chemistry, • Any other engineering or science disciplines relevant to Fire Engineering In your application, you should aim to demonstrate your genuine interest in both the opportunity and in joining Mott MacDonald. You can do this by highlighting any relevant experience or interests -such as modules you've studied, previous work experience, or any research you've undertaken about our company, values, and projects. We personally review every completed application we receive as our selection process is entirely human led – we do not use AI tools and kindly expect you not to either. We want you to answer each application question with authenticity so we can get to know the real you. Joining us as a graduate is your opportunity to shape your own story. • Proactively takes initiative to complete tasks efficiently and independently., • Communicates effectively and clearly with clients and colleagues., • Delivers high quality written work with strong attention to detail and clarity., • Demonstrates a structured and analytical approach to problem solving. As we want the best people for the role, we support flexible working. Please ask us at interview stage about any flexibility you may need. Mott MacDonald Ltd. are not currently offering sponsorship to candidates under the Skilled Worker visa route in the UK. This decision is as a consequence of the changes made to the Skilled Worker route by the UK Government in April 2024. Our ethos is to develop, train and retain our graduates and therefore we are looking for a long‑term relationship with our graduates. For this reason, we cannot accept applications from candidates who would be working under the Graduate visa route or other time‑limited visas, (irrespective of visa duration), due to their temporary nature and the requirement for sponsorship under the Skilled Worker route in future. We continue to welcome applications from candidates who are eligible for alternative immigration routes in the UK, that do not require sponsorship as a Skilled Worker now or in future. At Mott MacDonald, we see the value AI can bring, but we take a people‑first approach to hiring. While AI tools can help candidates prepare and build confidence, every application and hiring decision is reviewed by our recruitment and hiring teams. We encourage the responsible use of AI while ensuring we get to know the real person behind the application. We want you to feel supported and able to perform at your best throughout our recruitment process. If there is anything we can do to make applying or interviewing with us more accessible, please contact us at and we'll be happy to discuss how we can help. A graduate position should be more than just a job. We know this and so do you. That’s why with our graduate roles we aim to give you the experience and technical knowledge you need to progress your career. From the moment you join us, you’ll receive the training you need. You will be assigned a mentor, who will guide you to meet the objectives of your professional training needs. You will join our three‑year early careers soft skills development programme – Accelerating your Future, which is designed to give you the skills and tools necessary for a long‑lasting successful career here at Mott MacDonald. Being part of Mott MacDonald means more than just work; there’s a huge range of fun and exciting things that you can get involved in. From the moment you join us, you’ll have the opportunity to expand your social and professional network, whether it’s meeting other graduates or joining forces with other members of staff from around the company at our annual sports day. Each of our offices have a sports and social committee which will give you the chance to be part of a variety of sports, social and charity events. We’re committed to promoting a strong culture of social responsibility and encourage our staff to play active roles in the local community. It's worth noting that sports and social committees tend to vary from office to office, so as well as getting involved in what’s already on offer, don’t be afraid to suggest new events or initiatives that you think could be a great addition. It doesn’t stop there. From your first day, you’ll have access to Perks at Work, giving you discounts on cinema tickets, travel, utilities and much more, helping you make the most of our employee benefits. At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team, and personal commitments. We offer a hybrid working policy that embraces your well‑being, flexibility, and trust. We put equality, diversity, and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they can contribute. Financial wellbeing • Biannual salary reviews: We believe hard work should be recognised and rewarded. To support your development and progression, you'll be eligible for salary reviews twice a year during your first three years with us, subject to successfully completing your probation period., • We match employee pension contributions between 4.5% and 7%., • Life assurance equal up to 4 x your basic salary, with an option to increase the level of cover to 6 x your salary., • Our income protection scheme provides a financial benefit, as well as absence and return to work support due to long‑term illness or injury., • Flexible benefits, including increased life assurance cover, critical illness insurance, payroll saving and will writing., • As an independently owned business we share the financial success of the business with all our colleagues in various ways including annual bonus schemes. Employee Ownership • Our employee ownership model means no external investors, just us, creating a culture of shared success., • Our employees have a stake and a voice in our business, giving them a direct connection to our success through our personal and group performance bonuses., • As your career grows, so does your stake, recognising your long‑term impact and contribution., • Your voice matters, with the opportunity to connect directly with senior leadership through formal channels to help shape our future., • For our senior roles you will have a direct pathway towards ownership from day one. Health and wellbeing • Private medical insurance for all UK colleagues., • Health cash plan to support you with every day health costs and treatments., • Access to Peppy, providing free support from menopause experts for all UK colleagues., • A variety of wellbeing support is available through our comprehensive wellbeing program, including access for you and your family., • Ability to flex your salary to opt into a wide range of health benefits, many of which can be extended to your family too. Lifestyle • 33 days holiday each year, inclusive of public holidays and dependent on level, with the ability to buy or sell leave through our flexible benefits programme., • 10 days additional paid leave for Armed Forces Reservists and Cadet Force Adult Volunteers., • Holiday entitlement increased to a minimum of 35 days after 5 years’ service., • Variety of employee saving schemes and discounts from high‑street retailers. Enhanced family and carers leave • Enhanced family leave policies, including 26 weeks paid maternity and adoption leave, and two weeks paid paternity/partner leave., • Our shared parental leave matches maternity leave meaning we pay up to 24 weeks at full pay., • Up to five additional days leave are provided for those with significant caring responsibilities, two of which are paid., • We offer policies and dedicated support to help military families balance service life with career and wellbeing. Learning and development • Primary annual professional institution subscription., • A broad range of opportunities to enhance both technical and soft skills through mentoring, formal training, and self‑development options. Networks, communities, and social outcomes • Join a wide range of groups including our Advanced Employee Networks which support our LGBTQ+, gender, race and ethnicity, disability, and parents/carers communities., • We are proud signatories of the Armed Forces Covenant and Gold Award holders in the MOD Employer Recognition Scheme, supported by our dedicated internal Armed Forces Network., • Make a difference within our communities through our social outcomes. #J-18808-Ljbffr

Start your career with a global, employee-owned consultancy where your work can make a real difference. At Mott MacDonald, you'll work alongside experts, contribute to meaningful projects, and have the support, learning opportunities, and experience needed to grow your career from day one. As a Graduate Structural Engineer, you will work alongside experienced engineers and multidisciplinary teams to deliver structural engineering solutions across a diverse range of projects and sectors. You'll gain exposure to all stages of the project lifecycle, from feasibility studies and concept design through to detailed design, construction support, and site inspections. • Assist in the design and analysis of structural solutions for buildings and infrastructure projects., • Prepare structural calculations, technical reports, drawings, and specifications., • Develop conceptual design options and contribute to feasibility studies., • Undertake detailed design using reinforced concrete, steelwork, and other structural materials., • Collaborate with multidisciplinary teams including civil, geotechnical, mechanical, electrical, and architectural specialists., • Support site visits, inspections, surveys, and construction activities., • Contribute to sustainable design approaches, including carbon reduction and resilience assessments., • Use digital engineering and BIM tools to support project delivery., • Support project planning, programme management, and client interactions. As a Graduate Civil Engineer in our Infrastructure team, you will help plan and design highways and drainage solutions that enable safe, resilient and sustainable communities. Working alongside experienced engineers and other disciplines, you will contribute to a varied portfolio of projects from early feasibility and concept development through detailed design and construction support. • Support the design of highways, junctions, active travel routes, access roads and associated infrastructure., • Assist with drainage strategies and the design of surface water drainage systems, including sustainable drainage solutions., • Prepare calculations, technical notes, drawings, specifications, schedules and reports under the guidance of senior colleagues., • Use digital design and modelling tools to develop and communicate coordinated engineering solutions., • Contribute to feasibility studies, optioneering, design reviews, risk assessments and value engineering., • Work with multidisciplinary teams, clients, contractors, local authorities and other stakeholders., • Help ensure designs meet relevant standards, legislation and project requirements, with safety, quality, sustainability and whole-life value considered throughout., • Support site visits, surveys, inspections and construction-stage activities where required., • Manage assigned tasks, communicate progress and deliver accurate work to agreed programmes and budgets. At Mott MacDonald, we’re looking for curious, motivated graduates who want to make a real difference. Join our purpose-driven teams where your ideas matter, your growth is supported, and your work enhances the world we live in. To be eligible for this opportunity, you will have less than 12 months’ relevant experience (excluding placements) and have a minimum of a bachelors degree (obtained no earlier than 2025) or expected to achieve one of the following degree disciplines: • Civil Engineering, • Structural Engineering, • Civil and Structural Engineering, • Engineering Science with a structural specialism, • General Engineering degrees with significant civil/structural engineering content For some of our opportunities, a master’s degree is essential – this is reflected in the list of opportunities in the application form. Some of these opportunities will require you to be eligible to achieve security clearance. Security clearance is dictated by the types of projects we work on and normally requires you to be a UK British national or lived in the UK for five years or more. In your application, you should aim to demonstrate your genuine interest in both the opportunity and in joining Mott MacDonald. You can do this by highlighting any relevant experience or interests - such as modules you've studied, previous work experience, or any research you've undertaken about our company, values, and projects. • Proactively takes initiative to complete tasks efficiently and independently., • Communicates effectively and clearly with clients and colleagues., • Delivers high quality written work with strong attention to detail and clarity., • Demonstrates a structured and analytical approach to problem solving. Mott MacDonald Ltd. are not currently offering sponsorship to candidates under the Skilled Worker visa route in the UK. This decision is as a consequence of the changes made to the Skilled Worker route by the UK Government in April 2024. Our ethos is to develop, train and retain our graduates and therefore we are looking for a long-term relationship with our graduates. For this reason, we cannot accept applications from candidates who would be working under the Graduate visa route or other time-limited visas, (irrespective of visa duration), due to their temporary nature and the requirement for sponsorship under the Skilled Worker route in future. We continue to welcome applications from candidates who are eligible for alternative immigration routes in the UK, that do not require sponsorship as a Skilled Worker now or in future. At Mott MacDonald, we see the value AI can bring, but we take a people-first approach to hiring. While AI tools can help candidates prepare and build confidence, every application and hiring decision is reviewed by our recruitment and hiring teams. We encourage the responsible use of AI while ensuring we get to know the real person behind the application. We want you to feel supported and able to perform at your best throughout our recruitment process. If there is anything we can do to make applying or interviewing with us more accessible, please contact us at and we'll be happy to discuss how we can help. A graduate position should be more than just a job. We know this and so do you. That’s why with our graduate roles we aim to give you the experience and technical knowledge you need to progress your career. From the moment you join us, you’ll receive the training you need. You will be assigned a mentor, who will guide you to meet the objectives of your professional training needs. You will join our three-year early careers soft skills development programme – Accelerating your Future, which is designed to give you the skills and tools necessary for a long-lasting successful career here at Mott MacDonald. Being part of Mott MacDonald means more than just work; there’s a huge range of fun and exciting things that you can get involved in. From the moment you join us, you’ll have the opportunity to expand your social and professional network, whether it’s meeting other graduates or joining forces with other members of staff from around the company at our annual sports day. Each of our offices have a sports and social committee which will give you the chance to be part of a variety of sports, social and charity events. We’re committed to promoting a strong culture of social responsibility and encourage our staff to play active roles in the local community. It's worth noting that sports and social committees tend to vary from office to office, so as well as getting involved in what’s already on offer, don’t be afraid to suggest new events or initiatives that you think could be a great addition. It doesn’t stop there. From your first day, you’ll have access to Perks at Work, giving you discounts on cinema tickets, travel, utilities and much more, helping you make the most of our employee benefits. At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team, and personal commitments. We offer a hybrid working policy that embraces your well-being, flexibility, and trust. We put equality, diversity, and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they can contribute. • Biannual salary reviews: We believe hard work should be recognised and rewarded. To support your development and progression, you'll be eligible for salary reviews twice a year during your first three years with us, subject to successfully completing your probation period., • We match employee pension contributions between 4.5% and 7%., • Life assurance equal up to 4 x your basic salary, with an option to increase the level of cover to 6 x your salary., • Our income protection scheme provides a financial benefit, as well as absence and return to work support due to long-term illness or injury., • Flexible benefits, including increased life assurance cover, critical illness insurance, payroll saving and will writing., • As an independently owned business we share the financial success of the business with all our colleagues in various ways including annual bonus schemes., • Our employee ownership model means no external investors, just us, creating a culture of shared success., • Our employees have a stake and a voice in our business, giving them a direct connection to our success through our personal and group performance bonuses., • As your career grows, so does your stake, recognising your long-term impact and contribution., • Your voice matters, with the opportunity to connect directly with senior leadership through formal channels to help shape our future., • For our senior roles you will have a direct pathway towards ownership from day one., • Private medical insurance for all UK colleagues., • Health cash plan to support you with every day health costs and treatments., • Access to Peppy, providing free support from menopause experts for all UK colleagues., • A variety of wellbeing support is available through our comprehensive wellbeing program, including access for you and your family., • Ability to flex your salary to opt into a wide range of health benefits, many of which can be extended to your family too., • 33 days holiday each year, inclusive of public holidays and dependent on level, with the ability to buy or sell leave through our flexible benefits programme., • 10 days additional paid leave for Armed Forces Reservists and Cadet Force Adult Volunteers., • Holiday entitlement increased to a minimum of 35 days after 5 years’ service., • Variety of employee saving schemes and discounts from high-street retailers., • Enhanced family leave policies, including 26 weeks paid maternity and adoption leave, and two weeks paid paternity/partner leave., • Our shared parental leave matches maternity leave meaning we pay up to 24 weeks at full pay., • Up to five additional days leave are provided for those with significant caring responsibilities, two of which are paid., • We offer policies and dedicated support to help military families balance service life with career and wellbeing., • Primary annual professional institution subscription., • A broad range of opportunities to enhance both technical and soft skills through mentoring, formal training, and self-development options., • Join a wide range of groups including our Advanced Employee Networks which support our LGBTQ+, gender, race and ethnicity, disability, and parents/carers communities., • We are proud signatories of the Armed Forces Covenant and Gold Award holders in the MOD Employer Recognition Scheme, supported by our dedicated internal Armed Forces Network., • Make a difference within our communities through our social outcomes. #J-18808-Ljbffr

Mechanical Building Services Engineer Location: Croydon We are seeking a Mechanical Building Services Engineer to join our team in Croydon. The successful candidate will be responsible for delivering planned preventative maintenance (PPM), reactive maintenance, fault finding, and repairs across a range of mechanical building services systems. The role requires a strong understanding of commercial building services, with a focus on maintaining safe, efficient, and compliant operations within a customer-facing environment. • Carry out planned preventative maintenance (PPM) on mechanical building services plant and equipment in accordance with maintenance schedules and statutory requirements., • Undertake reactive maintenance and fault-finding activities on building services systems, ensuring minimal disruption to operations., • Maintain and repair mechanical systems including HVAC equipment, pumps, pipework, water services, heating systems, pressurisation units, expansion vessels, and associated plant., • Perform minor plumbing works, including repairs to sanitaryware, pipework, valves, and water systems., • Monitor plant performance and proactively identify areas for improvement, reliability enhancement, and energy efficiency., • Ensure all plant faults and defects are diagnosed and rectified promptly., • Support the operation and monitoring of Building Management Systems (BMS) where required., • Liaise with specialist subcontractors and supervise their activities on site to ensure compliance with site requirements and safe systems of work., • Administer contractor permits, work approvals, and safe isolation procedures where required., • Operate Permit to Work and Lock Out Tag Out (LOTO) systems in line with company and client procedures., • Ensure all maintenance activities are completed in accordance with Health & Safety legislation and company procedures., • Prepare and follow suitable Risk Assessments and Method Statements for all tasks undertaken., • Complete all relevant maintenance documentation and accurately update the Computer-Aided Facilities Management (CAFM) system, ensuring PPM and reactive tasks are closed out promptly., • Provide material requirements, parts lists, and estimated timescales for remedial works., • Maintain plant rooms, workshops, and engineering areas in a safe, clean, and orderly condition., • Build and maintain positive working relationships with colleagues, subcontractors, and client representatives., • Ensure compliance with contractual KPIs and SLAs., • Promote a positive safety culture by producing near miss reports, undertaking dynamic risk assessments, and challenging unsafe behaviours where identified., • Wear company uniform and PPE at all times and maintain a professional image when representing BGIS., • Support the wider engineering team and undertake any other duties reasonably requested by site management., • Recognised mechanical or plumbing apprenticeship, NVQ Level 3, City & Guilds, or equivalent qualification in Mechanical Engineering, Plumbing, or Building Services., • Proven experience within commercial building services maintenance., • Strong fault-finding and problem-solving skills across mechanical plant and equipment., • Good understanding of HVAC systems, heating systems, water services, pumps, and associated mechanical plant., • Knowledge of health and safety legislation and safe systems of work., • Experience using CAFM systems such as Maximo, Concept, or similar., • Ability to work independently and as part of a team., • Strong communication and customer service skills., • Water Hygiene awareness or L8 experience., • BMS monitoring experience., • F-Gas qualification., • Experience within corporate offices, commercial properties, or critical environments., • First Aid, IPAF, or PASMA certification. This role offers an excellent opportunity for a skilled Mechanical Building Services Engineer to join a professional facilities management environment and contribute to the safe and efficient operation of a prestigious site. At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organization. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognize that promoting diversity is an essential component of our continuing pursuit for organisational success! #BGISUK #LI-JC2 • Job Identification 233094, • Posting Date 09/15/2026, 02:16 PM, • Job Schedule Full time, • Job Shift Day, • Locations Croydon, Surrey, United Kingdom #J-18808-Ljbffr

We're currently recruiting for an experienced Electrical Test Engineer / EICR Engineer to join an established and growing electrical compliance contractor operating across London and the South East. Our client has an excellent reputation for delivering electrical inspection, testing, compliance and remedial services across a range of commercial and industrial environments. This is an excellent opportunity for a qualified Electrical Test Engineer looking to join a business offering long-term stability, competitive earnings and opportunities for progression. • Carry out Electrical Installation Condition Reports (EICRs) across commercial and industrial properties., • Undertake electrical inspection and testing in accordance with BS 7671 and current industry regulations., • Identify electrical defects, non-compliances and potential safety hazards., • Accurately record inspection findings and produce detailed electrical testing reports., • Complete electrical remedial works where required., • Diagnose and rectify electrical faults efficiently and safely., • Ensure all testing equipment is maintained and calibrated appropriately., • Liaise professionally with clients, site representatives and internal management teams., • Maintain high standards of health and safety throughout all works., • Complete relevant certification and documentation accurately and within required timescales., • NVQ Level 3 in Electrical Installation or equivalent recognised qualification., • City & Guilds 2391 Inspection & Testing qualification or equivalent., • 18th Edition Wiring Regulations (BS 7671)., • Proven experience carrying out commercial electrical inspection and testing., • Strong understanding of electrical compliance, fault finding and remedial works., • Ability to work independently and manage daily workloads effectively., • Excellent attention to detail and reporting skills., • Strong communication and customer service skills., • Full UK driving licence. Desirable: • Experience testing within large commercial buildings, offices, retail environments and industrial premises., • Experience using electronic certification and reporting software., • Previous experience working within electrical compliance or facilities management environments., • Basic salary up to £50,000 per annum, dependent on experience., • Realistic OTE of £60,000 - £70,000+ through overtime opportunities., • Company van., • Fuel card., • Ongoing training and professional development., • Opportunities for career progression., • Permanent employment with an established electrical contractor., • Additional company benefits. #J-18808-Ljbffr

Location/s: Glasgow, Brighton, Cardiff, Newcastle, Bristol; UK Mott MacDonald is a global engineering, management, and development consultancy with over 20,000 employees across more than 50 countries and 140+ offices. We work across incredible global industries, delivering exciting work that is defining our future and making an important societal impact in the communities we serve. Our people power our performance – we succeed when they do. With countless opportunities to collaborate, learn, and grow, the possibilities for excellence are as varied as every individual. Whether you want to grow as a subject matter expert or broaden your experience with roles across our international community, you’re surrounded by global specialists who want to combine their expertise and champion you to be your best. As a proudly employee‑owned business, we benefit our clients, our communities, and each other, investing in creating the right space for everyone to feel empowered, included, and valued. Whatever your ambition, Mott MacDonald is where people come to be brilliant. The Energy unit delivers services to clients globally across several sectors including hydropower, nuclear, waste, renewable generation and transmission & distribution networks. Together we provide integrated engineering and project management services across the project lifecycle – from concept and design to construction and operations, to decommissioning or repowering and life extension. Together with our clients, we’re helping to deliver the energy transition globally. Our division provides Civil and Structural expertise across power generation and HV transmission including power plants, HV substation / HVDC Interconnector converter station, and HV cable projects. Due to continued growth, we are looking for Civil Engineers at various capacities (Senior;D grade /principal ;E grade /Senior Principal;F grade ) with experience of engineering design to join our Civil and Structural Team in UK. The role will span a diverse portfolio of work and there will be opportunities for advancement within the team. The selected candidate will carry out design work on power plants, HV substation/ HVDC Interconnector converter station, and HV cable projects, fulfilling tasks including: • Project Management, • Proposal Writing, • Scheme Costings, • Front End Engineering Design (FEED), • Preparation of drawings for use in planning applications and tender packages, • Detailed Civil/Structural Design, • Design Coordination across multidisciplinary teams, • Preparation of Specifications, • Condition and Structural Assessment of existing structures to determine suitability for reuse Requirements: Requirements: • Advanced Structural Engineering Knowledge: The candidate should have a deep understanding of structural engineering principles, including load-bearing capacity, material properties, and design codes (e.g., Eurocodes, ASCE)., • Proficiency in Structural Analysis Software: Familiarity with tools such as SAP2000, ETABS, or similar software is essential for modeling and analyzing complex structures., • Experience with Building Information Modeling (BIM): Knowledge of BIM technologies and their application to improve project visualization, coordination, and execution., • Project Leadership: The successful candidate must be capable of managing structural engineering projects independently. This includes overseeing project timelines, budgets, and quality., • Proposal Writing and Cost Estimation: Ability to write compelling proposals and estimate project costs accurately., • Front End Engineering Design (FEED): Experience leading FEED activities related to structural components., • Multidisciplinary Collaboration: The candidate should excel in coordinating with other disciplines (e.g., architects, electrical engineers) to integrate structural designs seamlessly., • Conflict Resolution: Effective resolution of design conflicts within multidisciplinary teams., • Drawing Preparation: Proficiency in creating detailed drawings for planning applications and tender packages. Compliance with relevant standards is crucial., • Structural Assessment: Ability to assess existing structures for suitability and safety, considering reuse options., • Clear Communication: Excellent verbal and written communication skills are essential for conveying technical information, collaborating with team members, and presenting findings., • Leadership Mindset: The candidate should demonstrate leadership qualities, especially when guiding junior engineers or collaborating with stakeholders., • Relevant experience in structural engineering., • Energy project experience would be advantageous for this role., • Education: A Bachelor’s or Master’s degree in Civil or Structural Engineering., • Professional Engineer (PE) License: While not mandatory, having a PE license is advantageous Mott MacDonald Ltd. are not currently offering sponsorship to candidates under the Skilled Worker visa route in the UK. This decision is a consequence of the changes made to the Skilled Worker route by the UK Government in April 2024. We continue to welcome applications from candidates who are eligible for alternative immigration routes in the UK, that do not require sponsorship as a Skilled Worker now or in future. At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team, and personal commitments. We offer a hybrid working policy that embraces your well-being, flexibility, and trust. We put equality, diversity, and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they can contribute. At Mott MacDonald, we see the value AI can bring, but we take a people‑first approach to hiring. While AI tools can help candidates prepare and build confidence, every application and hiring decision is reviewed by our recruitment and hiring teams. We encourage the responsible use of AI while ensuring we get to know the real person behind the application. We want you to feel supported and able to perform at your best throughout our recruitment process. If there is anything we can do to make applying or interviewing with us more accessible, please contact us at and we’ll be happy to discuss how we can help. • We match employee pension contributions between 4.5% and 7%., • Life assurance equal up to 4 x your basic salary, with an option to increase the level of cover to 6 x your salary., • Our income protection scheme provides a financial benefit, as well as absence and return to work support due to long-term illness or injury., • Flexible benefits, including increased life assurance cover, critical illness insurance, payroll saving and will writing., • As an independently owned business we share the financial success of the business with all our colleagues in various ways including annual bonus schemes., • Our employee ownership model means no external investors, just us, creating a culture of shared success., • Our employees have a stake and a voice in our business, giving them a direct connection to our success through our personal and group performance bonuses., • As your career grows, so does your stake, recognising your long‑term impact and contribution., • Your voice matters, with the opportunity to connect directly with senior leadership through formal channels to help shape our future., • For our senior roles you will have a direct pathway towards ownership from day one., • Private medical insurance for all UK colleagues., • Health cash plan to support you with every day health costs and treatments., • Access to Peppy, providing free support from menopause experts for all UK colleagues., • A variety of wellbeing support is available through our comprehensive wellbeing program, including access for you and your family., • Ability to flex your salary to opt into a wide range of health benefits, many of which can be extended to your family too., • A minimum of 33-35 days holiday each year, inclusive of public holidays and dependent on level, with the ability to buy or sell leave through our flexible benefits programme., • 10 days additional paid leave for Armed Forces Reservists and Cadet Force Adult Volunteers., • Holiday entitlement increased to a minimum of 35 days after 5 years’ service., • Variety of employee saving schemes and discounts from high‑street retailers., • Enhanced family leave policies, including 26 weeks paid maternity and adoption leave, and two weeks paid paternity/partner leave., • Our shared parental leave matches maternity leave meaning we pay up to 24 weeks at full pay., • Up to five additional days leave are provided for those with significant caring responsibilities, two of which are paid., • We offer policies and dedicated support to help military families balance service life with career and wellbeing., • Primary annual professional institution subscription., • A broad range of opportunities to enhance both technical and soft skills through mentoring, formal training, and self‑development options., • Join a wide range of groups including our Advanced Employee Networks which support our LGBTQ+, gender, race and ethnicity, disability, and parents/carers communities., • We are proud signatories of the Armed Forces Covenant and Gold Award holders in the MOD Employer Recognition Scheme, supported by our dedicated internal Armed Forces Network., • Make a difference within our communities through our social outcomes. York, GB Glasgow, GB Croydon, GB Bristol, GB Newcastle Upon Tyne, GB Cardiff, GB Brighton, GB Permanent Full Time Energy Energy 17108 #J-18808-Ljbffr

Commercial Gas Engineer – Mobile | London Salary: £55,000 – £60,000 per annum Working Hours: Monday – Friday, 8:00am – 5:00pm Location: Mobile – London & Greater London Vehicle: Company Van Provided Employment Type: Permanent The Company Our client is a leading M&E building services provider, delivering mechanical and electrical engineering, maintenance and facilities services across a diverse portfolio of commercial properties throughout London and the south east. Due to continued growth, they are looking for an experienced Commercial Gas Engineer to join their mobile engineering team. This is an excellent opportunity for a qualified engineer looking for a stable, long-term position with a respected building services organisation. The Role As a Mobile Commercial Gas Engineer, you will be responsible for carrying out planned preventative maintenance, reactive repairs, servicing and fault finding across a range of commercial sites throughout London. You will work as part of an established mobile engineering team, providing a high standard of technical service to clients and ensuring all works are completed safely, efficiently and in accordance with relevant legislation and industry standards. Key Responsibilities Carry out PPM, reactive maintenance, servicing and repairs on commercial gas and heating systems. Diagnose and rectify faults on commercial gas appliances and associated plant. Maintain and service commercial boilers, burners, heating systems and associated mechanical equipment. Complete gas safety checks and ensure systems operate safely and efficiently. Carry out planned maintenance in accordance with contractual requirements. Respond to reactive breakdowns and emergency maintenance requests when required. Complete accurate service reports, job sheets and maintenance records. Liaise professionally with clients, site teams and other engineers. Identify additional works and report any defects or remedial requirements. Ensure all works comply with current Gas Safety Regulations, Health & Safety legislation and company procedures. Work alongside mechanical and electrical engineers as part of the wider M&E team. Maintain company tools, equipment and vehicle to a high standard. Travel between commercial sites across London and Greater London. Requirements Commercial Gas ACS qualifications – essential. Relevant commercial gas qualifications, including COCN1 / CODNCO1 or equivalent . Experience working as a commercial gas engineer within building services, facilities management or commercial maintenance. Strong fault-finding and diagnostic skills. Experience with commercial boilers, burners and heating systems. Full UK driving licence. Good customer-facing and communication skills. Ability to work independently and manage a mobile workload. Strong understanding of health & safety and gas legislation. A professional approach with the ability to represent the company positively on client sites. Desirable Experience working across commercial offices, retail, healthcare, education or other commercial environments. Additional mechanical qualifications. Experience with BMS-controlled heating systems. F-Gas or additional HVAC qualifications. Experience within a hard FM / M&E maintenance environment. Package £55,000 – £60,000 basic salary Company van provided Monday – Friday, 8:00am – 5:00pm Permanent position Mobile role covering London & Greater London Company uniform and PPE Company tools and equipment Ongoing training and development Opportunity to work for a leading M&E building services provider Long-term career progression TPBN1_UKTJ

What's in it for you: Salary up to £55,000 Company Car / £5,000 Car Allowance + Mileage Variable Pension Scheme up to 13% 28 Days Annual Leave + Bank Holidays (With option to buy more) Private Medical (With option to add family) CPD, Development & Progression Support Long-term secured work within

Responsibilities • Provide classroom and practical training in areas such as health and safety, working at height, manual handling, lifting operations, confined spaces and plant equipment. Ensure all training follows current health and safety legislation and industry best practice. Must be DBS che

Permanent, Full-Time, Site-Based Lev Recruitment is recruiting on behalf of an established specialist engineering and manufacturing business for an experienced Facilities, Health & Safety and Site Security Manager. Sound understanding of UK health and safety legislation and compliance. Lead health a

Working closely with clients, building managers and internal technical specialists, you will provide practical, compliant and commercially focused fire safety advice whilst producing technically accurate reports and recommendations. Fire Risk Assessor | Up to £55,000 + Car + Excellent Benefits & Ca

Responsibilities • Provide classroom and practical training in areas such as health and safety, working at height, manual handling, lifting operations, confined spaces and plant equipment. Ensure all training follows current health and safety legislation and industry best practice. Must be DBS che

Health and Safety Manager– South East c£70k South ABJ6781 PERM As Health & Safety (H&S) Manager you will join an established manufacturing organisation to take a leading role in managing Health & Safety across a complex, high-hazard manufacturing site in the south east. Health & Safety (SHE) prof

Undertake health and safety duties and responsibilities appropriate to the post Be committed to Natural Resources Wales Equal Opportunities and Diversity Policy , together with an understanding of how it operates within the responsibilities of the post Be committed to your own development through th

This qualification covers workplace hazards, health and safety legislation, and how to design and implement effective safety systems. Train online at your own pace and land your first health and safety role in 1-3 months. It’s one of the most widely recognised certifications across industries and

Reporting to the Supplier and Quality Manager, you will support the implementation and maintenance of health, safety and environmental management systems, ensuring compliance with relevant legislation and ISO standards. An exciting opportunity has arisen for a Health, Safety & Environment Advisor to

Health and Safety, Health and Safety Officer, Health and Safety Assistant, Health and Safety Coordinator, Health and Safety Advisor, Health and Safety Manager, Health and Safety Representative, HSE Officer, HSE Advisor, HSE Coordinator, SHE Officer, SHEQ Advisor, Occupational Health and Safety, Risk

As a Health and Safety Advisor, you'll focus on promoting and ensuring compliance with safety regulations within the industrial and manufacturing sector. Stay updated on health and safety regulations relevant to the industrial and manufacturing sector. Conduct regular site inspections to ensure comp

This qualification covers workplace hazards, health and safety legislation, and how to design and implement effective safety systems. Train online at your own pace and land your first health and safety role in 1-3 months. Build on your foundation with the NEBOSH General Certificate, the gold standar