Trabajos mechanical engineering technician en FarnhamCrear alertas

Shift Maintenance Technician - Critical Data Centre We are seeking a Shift Maintenance Technician to join our engineering team supporting a critical data centre environment. Working as part of a 24/7 shift team, you will be responsible for maintaining the reliability and availability of electrical and mechanical infrastructure through planned and reactive maintenance activities. Key Responsibilities: • Carry out planned preventative maintenance (PPM) and reactive repairs., • Monitor and operate critical plant and building systems., • Respond to alarms, faults, and emergency situations., • Perform fault finding on electrical and mechanical equipment., • Support specialist contractors and oversee maintenance activities., • Complete shift handovers, reports, and maintenance documentation., • Work safely in accordance with Permit to Work and Health & Safety procedures. Requirements: • Engineering qualification (Electrical or Mechanical)., • Experience in building services, facilities management, or critical environments., • Strong fault-finding and maintenance skills., • Knowledge of electrical distribution, HVAC, generators, UPS systems, or similar plant equipment., • Ability to work a rotating days/nights shift pattern. This is an excellent opportunity to join a high-performing team delivering maintenance services within a mission-critical facility where uptime, safety, and operational excellence are key priorities.

Sapien Engineering are looking for an Assembly Technician to join a defence client near Farnham on a contract basis. This is an initial 3-month contract, outside of IR35 paying circa £25 per hour. Job requirements: • Soldering – preferably IPC certified, • Experience with sub-assemblies, • Box Build, • Technical documentation, • Mechanical assembly, • Previous experience within aero/defence preferred, • MUST be comfortable using computers and online manufacturing systems For more information, please apply with an updated copy of your CV or email billy.mullen@sapienrec.co.uk

Experienced Shift Technician responsible for the operation, monitoring, and maintenance of critical infrastructure within a high-availability data centre environment. Working as part of a 24/7 shift team to ensure maximum uptime, operational resilience, and compliance with health, safety, and technical standards. Key Responsibilities • Performed planned preventative maintenance (PPM) and reactive maintenance on critical systems including:, • LV electrical systems, • UPS systems and standby generators, • HVAC / CRAC cooling infrastructure, • BMS and monitoring systems, • Fire suppression and detection systems, • Conducted routine plant inspections, fault diagnosis, and first-line response to critical alarms and incidents., • Supported contractor management, permit-to-work procedures, and safe system of work compliance., • Monitored building and environmental conditions to maintain uptime and operational efficiency., • Escalated critical issues appropriately and contributed to incident reporting and root cause analysis., • Maintained accurate maintenance records, shift logs, and compliance documentation., • Assisted with switching operations, isolations, and emergency response procedures in a mission-critical environment., • Worked collaboratively with engineering teams, facilities management, and external vendors to support continuous operations. Skills & Experience • Critical environment / mission-critical facilities maintenance, • Electrical and mechanical maintenance, • Fault finding and troubleshooting, • Preventative and reactive maintenance, • Data centre operations, • Health & Safety compliance, • Permit-to-work systems, • BMS / monitoring platforms, • Emergency response procedures, • Team collaboration within 24/7 shift operations Certifications (Optional to Include) • City & Guilds / NVQ in Electrical or Mechanical Engineering, • 18th Edition Wiring Regulations, • HV/LV Authorised Person or awareness training, • IOSH / Health & Safety certifications

Engineer Technician | Mechanical & Automation Systems | Aldershot I'm recruiting for a hands-on Engineer Technician role with a well-established SME that designs and installs mechanical automated production systems for some of the leading retail and production companies across the UK and Europe. If you're a practical engineer who thrives in a positive, collaborative environment, this could be a great fit. The Role You'll be involved in the full mechanical build, setting, and commissioning of mechanical and automation machinery, working from 2D/3D CAD drawings and assembly schedules. Day-to-day tasks will include cutting and building aluminium extruded frames, conveyors and guarding, building and setting pneumatic systems and pipework, positioning and setting reed switches and sensors, and making adjustments ready for commissioning and software testing. On customer sites you'll work as part of a team, assisting with the unloading of vehicles and moving equipment into position, so a good level of physical fitness is important. You'll then build out equipment to drawings and site conditions, working through to fully completed and operational systems. You'll also attend service visits for maintenance, warranty work and breakdowns, using your experience to fault find, problem solve, and feed back issues, preparing service reports and communicating clearly with the office. The role is a mix of workshop-based work in Aldershot and customer site visits across the UK, with some overseas travel. This can sometimes mean staying away from home for two to three weeks depending on project locations. What You'll Need • 5+ years of hands-on mechanical engineering experience, • Full UK driving licence, • Strong knowledge of machine mechanics and pneumatics, • Ability to read and interpret 2D/3D mechanical drawings, • Experience with sensor setting, pneumatic pipework and automation machinery, • A problem-solving mindset with strong communication skills, • Full, clean driving licence, • Your own tool kit or at least some, • Must live within 30 miles of Aldershot The Package • £30,000 – £36,000 depending on experience, • Overtime available (~50 hrs/month) at enhanced rates (1.5x weekdays/Sat, 2x Sun) C£11K, • 22 days annual leave, • Salary review after 3 months, then annually, • Bonus scheme & company pension included This is a company with a genuine team culture where people enjoy coming to work. You'll be joining a friendly, supportive environment with real variety in the role and the chance to work on interesting, technically rewarding projects with some well-known clients. Our client is not able to offer visa sponsorship.

Mechanical Design Engineer - Solidworks£40,000 - £45,000 + Flexitime + Overtime (At 1.5x Pay)+ Training + BenefitsMonday - Friday, 37.5 HoursAldershot - Commutable From: Farnborough, Farnham, Guildford & Woking Do you have mechanical design experience using Solidworks within an engineering or manufacturing environment? Are you looking for an exciting new role within a leading bespoke machinery manufacturer who are offering overtime to increase your earnings, first class training and excellent development opportunities? Due to continued growth, my client is looking for a design engineer to join the team, working out of their state of the art facility near Aldershot. The successful applicant will get the chance to work on extremely exciting projects for customers worldwide wide, liaising with the design, projects and manufacturing teams. You will be designing bespoke, special purpose machinery for customers across the globe, servicing a range of industries such as; aerospace, rail & medical. You will be joining a growing & experienced design team and will play a vital role within the business and will gain exposure to one off projects, progression paths and new sectors. In this varied role your responsibilities will also include managing machine build projects and working with the shop floor teams to ensure that all designs and customer requirements are adhered to. You will be working for an expanding business who have been at the forefront of their industry for over 25 years! Specializing in full concept to completion for customers from in house design and manufacturing to providing full turnkey installations, service and company product training. This is an exciting time to gain access to excellent company training, development opportunities and a varied role within a business who pride themselves on staff retention. For more information please click apply and contact PatrickWalsh - REF4950 - The Role:Managing a variety of designs for manufacturing projectsUsing Solidworks*Designing bespoke, special purpose machinery The Candidate:Mechanical design experience within a manufacturing or engineering environment3D and SolidWorks experience*A commutable distance to Aldershot and able to travel when needed elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. SPM|Aerospace|Machinery|Special Machinery|Bespoke|Design Engineer|Project Engineer|Inventor|Special Purpose|CAD Technician|Mechanical Engineer|AutoCAD|Solidworks|Junior||Manufacturing|Manufacturer|Manufactured|Engineering|Engineered|Training|Development|Progression|Aldershot|Woking|Farnborough|Farnham|Guildford|Hampshire INDMP

Our client is a well established and successful company. They are looking for an experienced Workshop Engineer to join their team. This will be site based. Salary: £16.00 - £18.00 per hour depending on experience (£18+ if you have OEM/Dealer/JCB experience) Hours of work: 40 per week (8.00am - 4.30pm, with 30 minute unpaid lunch break) A driving licence is essential but the role does not include a van. Responsibilities: • Repairing and maintaining a wide variety of machines within the workshop, using lifting equipment supplied., • PDI (Pre Delivery Inspection) new machines and fit additional parts and attachments as required., • Investigate, diagnose and resolve customer reports of technical problems with equipment., • General Engineering duties which include working at height, beneath and within all plant machines., • Driving and moving of machines inside and outside of the workshop., • Request parts efficiently and effectively., • Develop and maintain good working relationships with internal and external customers., • Supervise other workshop engineers, when required, to ensure that a high quality of work and safe working procedures are maintained., • Cover for the foreman when absent or on annual leave., • Assist in booking machines in and out., • Ensure the machines are ready for transport collections. Benefits include: • 22 Days Holiday, plus an additional day after 1 year for your birthday, an additional day added after 5 years’ service, up to 15 years, max holiday is 26 days, after 15 years’ service. 8 Bank Holidays., • Scottish Widows Pension. Company pay 4%, Employee 5%., • Death in Service - 3 x annual salary., • Westfield Cash Back Health Plan – can claim up to £800 back per year on dental, optical, therapies and consultations. Includes counselling service with 6 free sessions and a 24-hour doctor (dependents are covered under this scheme)., • Cycle to work Scheme., • Sick Pay – 3 months covered after 2 years’ service, 6 months covered after 5 years’ service., • Free legal advice to set up a Will and renew or purchase a Mortgage., • They celebrate significant birthdays and milestones., • There is a Positive Feedback incentive, 5 pieces of positive feedback will give you £25.00 Amazon voucher and you can claim a max of 10 per year., • Employees employee – nominations are in the November, with a £1000 for the winner, £500 for second, £250.00 for third. This role would suit someone with previous experience in a similar role, such as a Hydraulics Engineer / Service Technician / HGV Technician / HGV Engineer / HGV Mechanic / Mechanical Fitter / Plant Fitter / Plant Mechanic / JCB Engineer / JCB Technician / JCB Mechanic / Plant Fitter / Mechanical Fitter / Plant Maintenance Engineer / etc

Location:-Farnham Job Title:- Vehicle Technician (Level 2) Salary £35,000 + bonuses We are recruiting for a Level 2 Light Vehicle Qualified Technician in the Farnham Area, to join a brilliant Volume Dealership Group. This is a top Franchise that train and progress all their Technicians to the top level, and historically they have pushed them all the way up to Master Level/Group Technical level (which you can either take it or leave it). If you are a little bit bored and uninspired, this is your chance. Here are some but not all the benefits:- From £33,000 to £35,000 basic + bonuses (uncapped) 8:30-5pm - Mon - Fri with 1/3 weekends only 8:30-12:30pm 25 days holiday + bank holiday within a fantastic workshop & team Requirements for Vehicle Technician role 1. A Motor Trade qualification to work on any type of vehicle 2. Driving License 3. Tools to tackle repairs 4. 18 months experience, but open to a conversation around it (Level 2 Light Vehicle is the minimum they can take on) Ready for an upgrade? If you are interested in this position please contact Eric Duxbury at Holt Recruitment. He can tell you everything you need to know about your next move by hitting 'Apply' below. Please note:- if your CV is out of date, don't worry. Apply anyway, we can update it for you. Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments

Mechanical Design Engineer - Solidworks £40,000 - £45,000 + Flexitime + Overtime (At 1.5x Pay)+ Training + Benefits Monday - Friday, 37.5 Hours Aldershot - Commutable From: Farnborough, Farnham, Guildford & Woking Do you have mechanical design experience using Solidworks within an engineering or manufacturing environment? Are you looking for an exciting new role within a leading bespoke machinery manufacturer who are offering overtime to increase your earnings, first class training and excellent development opportunities? Due to continued growth, my client is looking for a design engineer to join the team, working out of their state of the art facility near Aldershot. The successful applicant will get the chance to work on extremely exciting projects for customers worldwide wide, liaising with the design, projects and manufacturing teams. You will be designing bespoke, special purpose machinery for customers across the globe, servicing a range of industries such as; aerospace, rail & medical. You will be joining a growing & experienced design team and will play a vital role within the business and will gain exposure to one off projects, progression paths and new sectors. In this varied role your responsibilities will also include managing machine build projects and working with the shop floor teams to ensure that all designs and customer requirements are adhered to. You will be working for an expanding business who have been at the forefront of their industry for over 25 years! Specializing in full concept to completion for customers from in house design and manufacturing to providing full turnkey installations, service and company product training. This is an exciting time to gain access to excellent company training, development opportunities and a varied role within a business who pride themselves on staff retention. For more information please click apply and contact Patrick Walsh - REF4950 - (phone number removed) The Role: Managing a variety of designs for manufacturing projects Using Solidworks *Designing bespoke, special purpose machinery The Candidate: Mechanical design experience within a manufacturing or engineering environment 3D and SolidWorks experience *A commutable distance to Aldershot and able to travel when needed elix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. SPM|Aerospace|Machinery|Special Machinery|Bespoke|Design Engineer|Project Engineer|Inventor|Special Purpose|CAD Technician|Mechanical Engineer|AutoCAD|Solidworks|Junior||Manufacturing|Manufacturer|Manufactured|Engineering|Engineered|Training|Development|Progression|Aldershot|Woking|Farnborough|Farnham|Guildford|Hampshire INDMP

Sapien Engineering are looking for an Assembly Technician to join a defence client near Farnham on a contract basis. This is an initial 3-month contract, outside of IR35 paying circa £25 per hour. Job requirements: • Soldering – preferably IPC certified, • Experience with sub-assemblies, • Box Build, • Technical documentation, • Mechanical assembly, • Previous experience within aero/defence preferred, • MUST be comfortable using computers and online manufacturing systems For more information, please apply with an updated copy of your CV ASAP

Apply today to work as a Production Technician for our client, which manufactures and produces health and beauty products. Staffline is recruiting Production Technicians in Alton . The rate of pay is from £15.26 per hour. Overtime is available and is paid from £22.89 per hour. This is a full-time role working a rotating 2-week shift pattern, with every second weekend off. Shift pattern: Week 1 : Monday, Tuesday, Friday, Saturday, Sunday - Week 2 : Wednesday, Thursday Hours: 10pm - 10am (12-hour shifts) Your Time at Work As a Production Technician, you will be responsible for: • Setting up and operating production lines in line with product specifications - Leading and supporting a production line team to achieve output targets - Monitoring line performance and reporting any issues or downtime - Carrying out basic machine adjustments and identifying faults - Escalating engineering or operational issues to the relevant teams - Working closely with Production, Warehouse, and Engineering teams - Ensuring all equipment is operated safely and maintained correctly - Completing production documentation, including work orders and set-up records - Maintaining product quality standards and reporting any defects - Following all Health & Safety procedures, SOPs, and GMP standards - Keeping work areas clean and compliant with operational standards This is a hands-on role within a fast-paced production environment, requiring strong attention to detail, teamwork, and the ability to respond quickly to changing demands. Our Perfect Worker Our ideal candidate will have: • Experience working within a manufacturing or FMCG environment (desirable but not essential) - Basic mechanical aptitude and confidence working with production machinery - The ability to lead, support, and motivate a small team - Good communication skills and the ability to work collaboratively - Strong attention to detail and commitment to quality standards - The ability to follow instructions and complete documentation accurately - Good organisational skills with the ability to prioritise workload - A flexible approach and the ability to adapt to changing demands - A calm and focused attitude when working under pressure - Basic IT skills, including confidence using computerised systems This role requires someone who is proactive, reliable, and comfortable working in a fast-paced production environment. Key Information and Benefits • Earn £15.26 - £22.89 per hour - Nights - Temp to perm opportunity - On-site support from Staffline - Canteen on site - Free car parking on site - Free hot drinks - Good links to public transport - PPE provided - Full training provided - Opportunities for overtime Job Ref: 1LALA About Staffline Staffline is the UK's largest recruitment solutions partner, enabling over 35,000 people into good work every week. We operate at more than 420 customer sites across England, Scotland and Wales. As one of the most established recruitment agencies in Nottingham with operations across the UK, we specialise in connecting businesses with temporary and permanent jobs across warehouse & logistics, food and drink, aviation, driving, technical & engineering, manufacturing & automotive and security. Important Information • Staffline and its subsidiaries do not charge any recruitment or job-seeking fees at any stage of the hiring process. - This job advert may not be copied, imitated, or used, in whole or in part, by third-party websites, without prior written consent from Staffline. - Our job adverts are correct at the time of publication, but some details and job responsibilities are subject to change. TPBN1_UKTJ

Our client is a well established and successful company. They are looking for an experienced Workshop Generator Engineer / PSU Service Engineer to join their team. This is a site based role. PLEASE ONLY APPLY IF YOU MEET THE FOLLOWING CRITERIA: You have several years experience of servicing Generators / Power Supplies (PSU) Solid mechanical aptitude Knowledge of engines, alternators, control panels and wiring diagrams Diagnostic and leadership skills able to work in a team or alone Proficiency with MS Office Ability to work without supervision Salary and other benefits: Salary: £17.00 - £19.00 per hour + Overtime, paid at time and a half + Many benefits. Positive Feedback incentive, 5 pieces of positive feedback will give you a £25.00 Amazon voucher. Employees employee – Yearly nominations with £1000 for the winner, £500 for second, £250 for third. Hours of work: 40 hours a week. Job Description Working out of the depot and being responsible for all aspects of power products/ generator preparation, delivering quality and ensuring that the generators dispatched are to the correct specification. The role involves preparing power products/generators for dispatch (PDI), fitment of attachment/kits, unit movement recording, setting up the generators via computer and ensuring the depot area that you work in is kept in a clean and presentable manner. There will also be the requirement to fix and repair generators that break down in the field and are transported back to the depot for repair. Key Responsibilities: To provide support to a range of machinery with a primary focus on keeping the machinery in peak operating condition through scheduled maintenance, repairs and inspections. Sole responsibility for ensuring PDI work is carried out to the required standard and timeframe of all the power products/generators. Fitting attachments/extras to generators as per sales request Lifting and moving of power products inside and outside of the workshop. Maintain the depot areas you work in, keeping it in a clean and presentable manner at all times. Investigate, diagnose and resolve reports of technical problems with power products General Engineering duties which include working at height, beneath and within all power products Repairing and maintaining power products Servicing of a variety of power products within the workshop Ability to work independently to troubleshoot and solve problems. Complete job cards to a high standard promptly and within a given timeframe. Complete paperwork and timesheets in a timely manner. Request parts efficiently and effectively Electrically and mechanically qualified Be able to do mechanical and electrical fault finding Develop and maintain good working relationships with internal and external customers Ensure compliance with relevant procedures when repairing and inspecting equipment * Ensure work/personal equipment complies with all safety standards This role would suit someone with previous experience in a similar role, such as a Generator Service Technician / Generator Mechanic / Generator Service Engineer / PSU Engineer / PSU Mechanic / PSU Technician / Service Technician / Mechanical Fitter / Plant Fitter / Power Supply Unit Engineer / etc