Production technician jobs in DerbyCreate job alerts

Location: Victory Road, Derby, DE24 8EL\n Job Type: Full Time, Permanent\n Hours: 38 hours per week, Mon-Fri. (hours to be discussed at interview can be flexible)\n Salary: £34,000 - £37,000 per annum (dependant on experience)\n \n \n Benefits: Company Pension - matched contribution scheme, Westfield Health care plan - after 3 months. Life Assurance. 25 days paid annual leave plus all UK Statutory Bank Holidays. W...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Paint Sprayer / Vehicle Paint Technician - Night Shift Rolling Stock Maintenance / Vehicle Finishing Team Client: Alstom UK - Derby Large-scale rail manufacturing and refurbishment environment Voyager Refurbishment project and the follow-on CL222 Refurbishment project until September 2028 Role Purpose This role involves delivering high-quality paint finishing on large rail vehicles, including full surface preparation, priming, spraying, and final finishing. You will be working in a safety-critical, physically demanding production environment where precision and finish quality are essential. Candidates from a range of engineering and vehicle finishing backgrounds will be considered. Location & Working Pattern Location: Derby Shifts: Nights Minimum 48 hours per week Immediate starts availableKey Responsibilities Carry out full surface preparation on rolling stock (sanding, keying, masking, filling) Apply primer and topcoat systems, including 2K paint systems Spray large vehicle surfaces to a high-quality standard Complete finishing work including polishing, defect removal, and snagging Carry out touch-ups and rectification work on completed vehicles Apply detailed livery designs accurately to specification Work from technical drawings, written instructions, and job sheets Maintain high standards of safety, cleanliness, and quality Work effectively as part of a fast-paced production teamShifts, Salary & Benefits Pay Rates: Note: The shift is a single continuous night shift with enhanced pay rates applied to overtime hours within the shift. Nights, Monday - Thursday (48 hr week total) 18.00 - 06.00 18.00 - 03.15: £24.06 PAYE / £32.24 Umbrella 03.15 - 06.00: £27.14 PAYE / £36.43 Umbrella Paid BreaksRequired Skills & Experience Essential Previous experience in paint finishing or spray painting Ability to prepare, prime, and finish large surface areas Experience working from technical instructions and specifications Strong attention to detail and quality control Ability to work in a physically demanding environment Ability and willingness to work permanent night shiftsDesirable Experience in rail, automotive, marine, aviation, HGV, or plant industries Water-based paint system experience Knowledge of 2K systems and Hydro topcoats Ability to mix and match paint colours accurately Experience with pressure pot spray systems Experience working with aluminium components (awareness of sensitivity considerations)Key Competencies Strong attention to detail and pride in workmanship Ability to follow structured processes consistently Team-oriented approach in a high-volume production environment Consistency across large surface applications Reliable and committed to shift-based work Safety-focused at all times Willingness to learn and develop new techniquesHealth, Safety & Compliance Drug & Alcohol test required prior to start Full compliance with PPE and site safety rules Safe handling of coatings, chemicals, and equipment Adherence to COSHH and environmental procedures Working within a safety-critical manufacturing environment # INDENG-BR Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Are you a multi skilled Maintenance Technician who enjoys getting to the bottom of faults and keeping production moving? Our client is looking for a Shift Maintenance Technician to join their manufacturing operation, supporting the smooth running of a busy production environment on a 4 on, 4 off shift pattern. This is a hands on role where you will be responsible for maintaining a wide range of manufacturing equipment, responding to breakdowns, carrying out planned maintenance. Key Responsibilities: Service equipment according to planned maintenance schedules Respond to breakdowns as first line support Diagnose and repair faults on extrusion lines and moulding machines Maintain ancillary equipment, automated cells and butt fusion equipment Implement approved modification projects to capital equipment Perform mechanical and electrical work safely and efficiently Complete daily logs and data capture via CMMS system Who They’re Looking For: Level 3 Electrical or Mechanical apprenticeship, HNC/HND or equivalent qualification 3 years' experience in a similar maintenance role Proven fault-finding and problem-solving abilities Experience with PLC fault-finding (desirable) Knowledge of hydraulic and pneumatic systems (desirable) Extrusion and injection moulding experience (desirable) 18th Edition certification, desirable) Benefits: Health Cashback Scheme Employee Assistance Program Cycle to Work Scheme High Street Discounts portal Salary Sacrifice Pension Life Assurance Health and Wellbeing programme On-site parking Subsidised canteen * Enhanced Maternity and Paternity Pay Ready for a role where your maintenance skills can make a real difference to production? If you have the electrical and mechanical experience we are looking for, we would love to hear from you. Apply today to find out more

Paint Sprayer / Vehicle Paint Technician - Rolling Stock Rolling Stock Maintenance / Vehicle Finishing Team Client: Alstom UK - Derby Large-scale rail manufacturing and refurbishment environment Voyager Refurbishment project and the follow-on CL222 Refurbishment project until September 2028 Role Purpose This role involves delivering high-quality paint finishing on large rail vehicles, including full surface preparation, priming, spraying, and final finishing. You will be working in a safety-critical, physically demanding production environment where precision and finish quality are essential. Candidates from a range of engineering and vehicle finishing backgrounds will be considered. Location & Working Pattern Location: Derby Shifts: Days Minimum 45 hours per week Immediate starts availableKey Responsibilities Carry out full surface preparation on rolling stock (sanding, keying, masking, filling) Apply primer and topcoat systems, including 2K paint systems Spray large vehicle surfaces to a high-quality standard Complete finishing work including polishing, defect removal, and snagging Carry out touch-ups and rectification work on completed vehicles Apply detailed livery designs accurately to specification Work from technical drawings, written instructions, and job sheets Maintain high standards of safety, cleanliness, and quality Work effectively as part of a fast-paced production teamShifts, Salary & Benefits Note: The shift is a single continuous day shift with blended pay rates applied across early and late hours within the shift. Days, Monday - Thursday (45 hr week total) 06.00 - 16.30 * Friday 06.00 - 11.00 o 06:00-14:00: £19.57 PAYE / £26.15 Umbrella o 14:00-16:30: £24.06 PAYE / £28.06 Umbrella Required Skills & Experience Essential Previous experience in paint finishing or spray painting Ability to prepare, prime, and finish large surface areas Experience working from technical instructions and specifications Strong attention to detail and quality control Ability to work in a physically demanding environmentDesirable Experience in rail, automotive, marine, aviation, HGV, or plant industries Water-based paint system experience Knowledge of 2K systems and Hydro topcoats Ability to mix and match paint colours accurately Experience with pressure pot spray systems Experience working with aluminium components (awareness of sensitivity considerations)Key Competencies Strong attention to detail and pride in workmanship Ability to follow structured processes consistently Team-oriented approach in a high-volume production environment Consistency across large surface applications Reliable and committed to shift-based work Safety-focused at all times Willingness to learn and develop new techniquesHealth, Safety & Compliance Drug & Alcohol test required prior to start Full compliance with PPE and site safety rules Safe handling of coatings, chemicals, and equipment Adherence to COSHH and environmental procedures Working within a safety-critical manufacturing environment# INDENG-BR Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Job Title: Maintenance Technician Location: Derby Salary: £29 per hour (Umbrella) Start: ASAP Employment Type: 6-12 Months Working Pattern: 4 days on, 4 days off, consisting of two blocks of day shifts followed by two blocks of night shifts - Day Shifts: 7:30am - 6:30pm/Night Shifts: 7:15pm - 7:00am Main Responsibilities Perform Scheduled Maintenance activities on the rolling stock in accordance with the vehicle maintenance instructions. Undertake servicing and preparation of the rolling stock. Undertake driving duties within depot confines in accordance with the depot operating procedures and instructions. Actively participate in the ongoing continuous improvement activities for maintenance processes and maintenance procedures that support all depot and fleet activities. Support the delivery of new trains and undertake the maintenance acceptance processes. Ensure exam tasks are being completed in a timely manner, undertake basic fault rectification or repair when required. Adherence to all health and safety processes and procedures. Attendance at testing locations, main line station and outstations to undertake preventative and corrective maintenance as required. Must be prepared to travel and overnight away from base location for short periods of time. Support the Maintenance Team Leaders and Shift Production Managers in the delivery of the production plan. Record all work activities and stock consumption using the maintenance management system in accordance with maintenance processes and procedures. Working shifts to meet the service requirements of fleet customers. Assist as required with any other responsibilities relevant to the role based on localised requirement.Job Skills, Experience and Qualifications Essential Licences / Competences Network Rail Sentinel PTS. Manual Handling, COSHH, working at height, Powered plant, and tools. Experience of working a 24/7 shift roster in a modern rolling stock maintenance depot environment. Outstanding Safety Awareness gained in an operational railway engineering environment. Experience of working at stabling outstations or main line station technical support. Modern fault finding and repair techniques using pc-based laptops and remote train diagnostics. Extensive experience of modern maintenance management systems (MMS) and associated reliability and available trend analysis. Experience of performing modifications and campaigns on modern rolling stock.Qualifications Served apprenticeship with mechanical, engineering disciplines. Engineering based NVQ level 3.Behavioural Can comfortably work within a team or on their own. Sound knowledge of, and compliance to, rules and regulations (internal and external). Able to always represent Hitachi in a professional manner. Calm and diplomatic under pressure. Ability to investigate complex electrical and mechanical faults and write detailed reports. Excellent written and verbal communication skills. Able to interface effectively with all levels of personnel both within and outside the company. Loyal, committed, confident and determined.Desirable Licences / Competences Intermediate IT skills - typically Word, Excel, Power Point, Outlook Reading electrical, pneumatic, mechanical schematics and drawings reading Powered plant and tools - bogie drop, cranes, air systems / 110v tools Depot Protection Working at Height, COSHH, Manual handling, AC/DC Depot isolationThis vacancy is being advertised by Rullion Ltd acting as an employment business. Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants. INDTR-SO Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants

Senior Revit Technician Permanent Location – Derby Salary – Negotiable, dependent on experience A fantastic opportunity has arisen for one of our clients based in Derby, delivering high-accuracy topographical, measured building and underground utility surveys alongside advanced 3D Revit and BIM modelling, laser scanning and engineering setting-out services. The business works across construction, infrastructure, rail, energy and heritage sectors on projects ranging from complex heritage buildings to large-scale developments. With a sizeable in-house team, decades of experience and a reputation as a genuine one-stop survey-to-BIM partner, the business is now looking to appoint a Senior Revit Technician to strengthen its growing BIM team. As Senior Revit Technician, you will work closely with experienced surveyors, BIM coordinators and project managers, taking a lead role in producing accurate 3D Revit models and BIM deliverables. Reporting into the BIM/CAD team, the Senior Revit Technician will lead a small team, overseeing model production across a variety of project types while supporting less experienced technicians. Candidates with a strong surveying background who are looking to progress from 2D AutoCAD drafting into full 3D Revit/BIM modelling will also be considered for this role. Responsibility & Duties Lead and supervise a small team of CAD/BIM technicians Produce and manage detailed 3D Revit models from survey data Support point cloud to BIM model conversion and processing Review and quality-check models produced by junior CAD technicians Liaise directly with clients on model specification and requirements Ensure all Revit deliverables comply with agreed BIM standards Take a lead role as Senior Revit Technician on major projects Manage multiple Revit projects concurrently to meet deadlines Experience & Qualification Proven experience working as a Senior Revit Technician or similar Strong working knowledge of Revit and BIM workflows essential Experience producing models from point cloud and survey data Familiarity with AutoCAD and other CAD software advantageous Understanding of BIM standards and protocols advantageous Strong attention to detail and quality control skills Ability to manage own workload and meet deadlines Excellent communication skills, liaising with clients and site teams If you are an experienced Senior Revit Technician and this role is of interest, please send your most up-to-date CV to the details below and get in touch straight away. (email address removed). co. uk (phone number removed) LinkedIn – pritesh tailor cad

CAD Technician - Bespoke Joinery & Fit-Out CAD Technician / Design Engineer - a leading joinery and interior fit-out specialist based in Nottingham is searching for a CAD Technician / Design Engineer to join the growing team. This is an excellent opportunity for a CAD Technician / Design Engineer join a successful business delivering high-end bespoke joinery solutions across commercial, healthcare, education sectors. This role offers the opportunity to take ownership of projects from initial design through to manufacture and installation. Why Apply: Our client has cemented themselves as one of the leading specialist contractors in the East Midlands; they have an impressive network of repeat clients including main contractors and end-users. The business is entering a period of growth and offers the opportunity to make a difference in a business focussed on training, development and progression of the team. Salary & Package: - Basic salary of £32,500 - £42,500 (DOE) - 25 days holiday + bank holidays. - Healthcare Scheme - Company Pension Key Benefits: - Growing business with a low staff t/o across all departments - Modern office environment and supportive team - Privately owned with excellent I.T systems - Excellent training and development Key Duties: - Produce detailed 2D AutoCAD drawings for manufacture and installation - Create 3D design visuals using relevant CAD - Interpret design concepts and develop accurate manufacturing drawings - Complete material take-offs and quantities for sheet materials, solid surfaces, glass and hardware - Source supplier quotations and support material procurement - Produce cutting lists and CNC-ready information for manufacturing - Work closely with production teams to ensure designs meet project specifications Requirements: - Proven experience as a CAD Technician, Design Engineer, Setting Out Technician or Technical Designer - Strong 2D AutoCAD skills with experience in bespoke joinery, shopfitting, furniture or interior fit-out projects - Understanding of manufacturing processes and technical drawings - Experience producing cutting lists and production information To qualify for the higher rate of pay you must be able to demonstrate a track record as a CAD Technician / Design Engineer within the bespoke joinery or interior refurbishment sector. Apply Now! For any further information on this CAD Technician / Design Engineer vacancy please apply with your CV attached or contact Mark Dalgleish at Saxton Recruitment on (phone number removed). Building Partnerships

Are you a hands-on engineer who enjoys solving technical problems, building machinery, and working directly with customers? We're looking for a Sealer Support Technician to join a growing specialist manufacturing business. This is a varied role combining workshop-based engineering with customer site visits across the UK, giving you the opportunity to develop your technical expertise while working on innovative packaging machinery. With all travel expenses covered and the chance to make a real impact, this is an excellent opportunity for a proactive engineer looking for a rewarding and diverse position. The RoleAs a Sealer Support Technician, you'll be responsible for supporting customers, assembling and maintaining sealing equipment, carrying out calibrations and repairs, and assisting with the continuous improvement of machinery and processes.Key Responsibilities\n\n • Build, assemble and test sealing machinery from technical drawings.\n, • Carry out equipment calibrations, servicing and repairs both in-house and at customer sites. \n, • Manage spare parts stock levels and complete regular stock checks. \n, • Support customers with technical enquiries via phone and email. \n, • Assist with the development and improvement of packaging machinery and production equipment.\nAbout YouWe're looking for a practical and organised engineer with strong technical knowledge and excellent problem-solving abilities.\n\n, • Apprenticeship-trained engineer or qualified to HNC/HND level in a relevant discipline. \n, • Knowledge of mechanical, electrical, pneumatic and PLC systems.\n, • Ability to read and work from technical drawings. \n, • Strong communication skills with a customer-focused approach. \n, • Competent using Microsoft Office and maintaining technical records. \nWhat's In It For You?\n\n, • Salary of £34,000.\n, • 21 days holiday + Bank Holidays\n, • Employee assistance programme\n, • Health and wellbeing programme including health checks and reward days\n, • Bonus scheme after 12 months of employment\n, • Occasional UK travel with all travel expenses fully covered.\n, • Ongoing training and development within a supportive team environment.\nInterested? If you're a motivated engineer who enjoys a mix of technical hands-on work, customer interaction and UK travel, we'd love to hear from you. Apply today to take the next step in your engineering career.

Paint Sprayer / Vehicle Paint Technician - Night Shift Rolling Stock Maintenance / Vehicle Finishing Team Client: Alstom UK - Derby Large-scale rail manufacturing and refurbishment environment Voyager Refurbishment project and the follow-on CL222 Refurbishment project until September 2028 Role Purpose This role involves delivering high-quality paint finishing on large rail vehicles, including full surface preparation, priming, spraying, and final finishing. You will be working in a safety-critical, physically demanding production environment where precision and finish quality are essential. Candidates from a range of engineering and vehicle finishing backgrounds will be considered. Location & Working Pattern • Location: Derby, • Shifts: Nights, • Minimum 48 hours per week, • Immediate starts available Key Responsibilities • Carry out full surface preparation on rolling stock (sanding, keying, masking, filling), • Apply primer and topcoat systems, including 2K paint systems, • Spray large vehicle surfaces to a high-quality standard, • Complete finishing work including polishing, defect removal, and snagging, • Carry out touch-ups and rectification work on completed vehicles, • Apply detailed livery designs accurately to specification, • Work from technical drawings, written instructions, and job sheets, • Maintain high standards of safety, cleanliness, and quality, • Work effectively as part of a fast-paced production team Shifts, Salary & Benefits Pay Rates: Note: The shift is a single continuous night shift with enhanced pay rates applied to overtime hours within the shift. • Nights, Monday - Thursday (48 hr week total), • 18.00 - 06.00, • 18.00 - 03.15: £24.06 PAYE / £32.24 Umbrella, • 03.15 - 06.00: £27.14 PAYE / £36.43 Umbrella, • Paid Breaks Required Skills & Experience Essential • Previous experience in paint finishing or spray painting, • Ability to prepare, prime, and finish large surface areas, • Experience working from technical instructions and specifications, • Strong attention to detail and quality control, • Ability to work in a physically demanding environment, • Ability and willingness to work permanent night shifts Desirable • Experience in rail, automotive, marine, aviation, HGV, or plant industries, • Water-based paint system experience, • Knowledge of 2K systems and Hydro topcoats, • Ability to mix and match paint colours accurately, • Experience with pressure pot spray systems, • Experience working with aluminium components (awareness of sensitivity considerations) Key Competencies • Strong attention to detail and pride in workmanship, • Ability to follow structured processes consistently, • Team-oriented approach in a high-volume production environment, • Consistency across large surface applications, • Reliable and committed to shift-based work, • Safety-focused at all times, • Willingness to learn and develop new techniques Health, Safety & Compliance • Drug & Alcohol test required prior to start, • Full compliance with PPE and site safety rules, • Safe handling of coatings, chemicals, and equipment, • Adherence to COSHH and environmental procedures, • Working within a safety-critical manufacturing environment INDENG-BR Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants. JBRP1_UKTJ

ROLE: Extrusion Technician HOURS: Continental shifts 4 on, 4 off. 6am - 6pm days or 6pm - 6am nights SALARY: up to £17.32 per hour based on experience, plus shift allowance, benefits and £2,500 retention bonus BENEFITS: Healthcare Cash Plan, 3x Salary Life Assurance, High Street Discounts, Staff Discount BASE: Site Based, Somercotes, Alfreton NEW RETENTION INCENTIVE: We're committed to building a skilled Extrusion Technician team. To support this, we're offering a £2,500 retention bonus for new joiners in this role. You will receive the bonus once: • You successfully complete your 3-month probation, • You complete 6 months of continuous service as an Extrusion Technician The bonus will be paid in the first payroll following the 6-month milestone. This incentive helps us attract experienced technicians and supports long-term career growth at Eurocell. (Terms and Conditions apply). Eurocell are a stock market listed Plc and the market leader for uPVC products within the building industry. We know that our people are our greatest asset, we are successful, dynamic, ambitious and looking for great team players to grow with us. WHAT OUR EXTRUSION TECHNICIANS DO: • Set up and troubleshoot extrusion production lines to the required specifications, • Ensure the product is put into production within the time frame specified, • Inspect and sign off of product to ensure quality standards are met, • Contribute to the control of the manufacturing process of all finished and semi-finished goods to the required quality standards, • To support production management to implement / execute the operations improvement, • Actively seek out potential Health, Safety & Environmental issues and support actions to reduce/eliminate risk WHAT WE NEED FROM OUR EXTRUSION TECHNICIANS: • Previous Technical experience to carry out tooling set up, troubleshooting and quality control, • Competent in reading technical drawings, • Experience in product inspection and checking, • Competent level of relevant 'on the job' training and experience required, • Attention to detail and logical decision making, • Experience of forward thinking and planning ahead, • Good written and verbal communication skills, • Good level of numeracy skills, • Understanding of key safety activities, • Experience of working within a factory environment and working long shifts, on your feet WHAT WE OFFER OUR EXTRUSION TECHNICIANS: • You will be rewarded with a very competitive basic salary, • 25 days holiday, plus statutory holidays - normally 33 days in total each year, • Free Healthcare plan for all employees, • Enhanced Maternity and Paternity benefit, • Free Life Assurance Plan of 3x your Annual Salary Christmas shutdown, • Option to join the Eurocell Share Save Scheme at discounted rates, and share in our company success, • Company Pension Plan, • Employee discount on Eurocell products, • Discounts across many well-known online and high street retailers, • A blend of training, including e-learning and on the job training to help your career development, • Care First Employee Assistance Programme, available 24 hours a day, 365 days a year for confidential support and advice, if and when you need it, • Colleague Referral Programme; we pay you for successfully referring people to join our team, • Excellent opportunities to grow with us, and progress your career JBRP1_UKTJ

Unic International is the UKs leading manufacturer in cleaning and recycling equipment for the paint finishing industry.A market leader within the UK market working for a varied customer base from accident repair centres to blue chip companies.Exporting to 30 plus countries around the world.Our aim

Job Title: Maintenance Technician Location: Derby Salary: £29 per hour (Umbrella) Employment Type: 6-12 Months Working Pattern: 4 days on, 4 days off, consisting of two blocks of day shifts followed by two blocks of night shifts - Day Shifts: 7:30am - 6:30pm/Night Shifts: 7:15pm - 7:00am Main Responsibilities Perform Scheduled Maintenance activities on the rolling stock in accordance with the vehicle maintenance instructions. Undertake servicing and preparation of the rolling stock. Undertake driving duties within depot confines in accordance with the depot operating procedures and instructions. Actively participate in the ongoing continuous improvement activities for maintenance processes and maintenance procedures that support all depot and fleet activities. Support the delivery of new trains and undertake the maintenance acceptance processes. Ensure exam tasks are being completed in a timely manner, undertake basic fault rectification or repair when required. Adherence to all health and safety processes and procedures. Attendance at testing locations, main line station and outstations to undertake preventative and corrective maintenance as required. Must be prepared to travel and overnight away from base location for short periods of time. Support the Maintenance Team Leaders and Shift Production Managers in the delivery of the production plan. Record all work activities and stock consumption using the maintenance management system in accordance with maintenance processes and procedures. Working shifts to meet the service requirements of fleet customers. Assist as required with any other responsibilities relevant to the role based on localised requirement. Job Skills, Experience and Qualifications Essential Licences / Competences Network Rail Sentinel PTS. Manual Handling, COSHH, working at height, Powered plant, and tools. Experience of working a 24/7 shift roster in a modern rolling stock maintenance depot environment. Outstanding Safety Awareness gained in an operational railway engineering environment. Experience of working at stabling outstations or main line station technical support. Modern fault finding and repair techniques using pc-based laptops and remote train diagnostics. Extensive experience of modern maintenance management systems (MMS) and associated reliability and available trend analysis. Experience of performing modifications and campaigns on modern rolling stock. Qualifications Served apprenticeship with mechanical, electrical disciplines. Engineering based NVQ level 3. Behavioural Can comfortably work within a team or on their own. Sound knowledge of, and compliance to, rules and regulations (internal and external). Able to always represent Hitachi in a professional manner. Calm and diplomatic under pressure. Ability to investigate complex electrical and mechanical faults and write detailed reports. Excellent written and verbal communication skills. Able to interface effectively with all levels of personnel both within and outside the company. Loyal, committed, confident and determined. Desirable Licences / Competences Intermediate IT skills - typically Word, Excel, Power Point, Outlook Reading electrical, pneumatic, mechanical schematics and drawings reading Powered plant and tools - bogie drop, cranes, air systems / 110v tools Depot Protection Working at Height, COSHH, Manual handling, AC/DC Depot isolation This vacancy is being advertised by Rullion Ltd acting as an employment business. Since 1978, Rullion has been securing exceptional candidates for a range of clients; from large well-known brands to SMEs and start-ups. As a family-owned business, Rullion's approach is credible and honest, focused on building long-lasting relationships with both clients and candidates. We celebrate and support diversity and are committed to ensuring equal opportunities for both employees and applicants. INDTR-SO Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants. TPBN1_UKTJ

A well-established manufacturer is looking for a reliable and enthusiastic Machining Technician to join its production team. Job Title: EPS Machining Technician Location: Derbyshire Salary: Up to £35,000 per annum Hours: Monday to Friday: 6am-2. The Role You w

Electrical Engineer | Multi-Skilled Maintenance Engineer | Shift Engineer | Maintenance Technician | Electrical Shift Technician | Manufacturing Engineer | Controls Engineer | Production Maintenance Engineer | Automation Engineer | Plant Maintenance Engineer. Electrical Maintenance Engineer. Benefit

Job Title: Field Service Technician Holidays: 25 days plus bank holidaysPension: 6% contribution match from employerSalary: £40 - 45k depending on experience Working as part of the FastTrack team and dependant on the requirement to be split between office (Heanor, Derbyshire) and fully site based within the UK or overseas the undertaking of prestart works, planning and the management, execution and delivery of installation projects to the quoted scope, delivery dates, budget, Client & Business needs. To ensure the timely on-site installation, testing and site commissioning of all mechanical equipment. To liaise with Clients at Site Level to agree modes of operation and, where applicable assist in the production of Method Statements and Risk Assessment. To supervise sites and provide advice and guidance to the site installation team. To comply with all Health and Safety responsibilities with the role and task, as outlined in the Cullum Health and Safety Policies and Documentation and any client site specific requirements Daily reporting site-based project progress against the agreed programme and any delays to the Project Manager or in their absence the head of the FastTrack Business unit Work with Project/Sales Engineers to create the core work elements or work breakdown structure (WBS) to support effective costing & site project delivery. To support the Sales and Projects teams by planning and undertaking site surveys and producing technical reports detailing the condition of installed equipment. With a view to aid in the support of future work. 1. JOB ACTIVITIES Work directly with Customers, Sales/Applications Engineers and Project Engineers to develop estimates, costing and plans for on-site installation projects within the UK or overseas Engage with relevant stakeholders, to ensure deliverables align with on-site requirements and client's requirements Engage and coordinate with internal stakeholders and the external supply chain to ensure on-time delivery of items to Uk sites or overseas Plan, develop and prepare project Health & safety files and not limited to: Risk Assessments, Method Statements, COSHH Registers. to ensure compliance with current regulations and legislations for UK and overseas sites. To oversee the Site installation phase of projects, working closely and liaising with site personnel, customer, suppliers, sub-contractors and Cullum associated departments. Maintaining the Project Snag List with respect to Mechanical Installation, assist with generation and completion of site documentation. Monitor materials and workmanship of Sub-Contractors to ensure the works installed are in accordance with the Approved Drawings materials and specifications. Ensure project delivery is on time, within budget, and of good quality as far as reasonably practical within delivery constraints. Plan, arrange, execute and produce site survey reports within the UK or overseas for clients. The expected frequency is 1 week per month travelling to client site locations within the UK and overseas to undertake site-based and offshore inspection activity Assist with or carry out any other sales/project activities as required by your Line Manager or International Sales Director. 1. SUPERVISION AND RESPONSIBILITIES Lead by example on matters of Health Safety & Environmental, welfare and codes of conduct. Identify and implement areas of improvement for Site working. Work under, own initiative providing guidance and supervision of Site personnel. Work to attain optimum performance within the Installations Department and associated areas of Site responsibility. Responsible for the control of designated site resource including personnel welfare, Health & Safety and discipline on assigned projects. Periodic audits of worksites, ensuring compliance with Cullum, Customer, and HSE process, in particular CDM and Permit control. Reporting to your line manager you will be expected to work independently and achieve results without supervision. Strong team working ethic, able to contribute to a dynamic group, working under own initiative and as part the department and wider team as required. The work is varied, may be complex and will involve changing rapidly from one task to another during the working day, often under pressure. 1. GENERIC CONDITIONS Promote and represent the Company when required, setting a good personal example at all times. Knowledge of health, safety, environmental and operational management, and an ability to motivate people for all aspects of the business to fulfil both business and project requirements. Take all possible and reasonable steps to create a harmonious working environment using effective communication and team working techniques. Be aware of, and adhere to Company policies and procedures, including but not limited to the Health, Safety, Welfare, Environmental & Quality policies and procedures and the Employee Handbook. Undertake duties as may be required within capabilities consistent with the Terms and Conditions of employment and responsibilities in accordance with UK and EC Laws. Be aware of, and adhere to, all applicable current Cullum IMS documentation including policies, procedures and the Employee Handbook. Undertake tasks and responsibilities assigned by line manager. Travel overseas may be required in this role JBRP1_UKTJ

Are you a multi skilled Maintenance Technician who enjoys getting to the bottom of faults and keeping production moving? Our client is looking for a Shift Maintenance Technician to join their manufacturing operation, supporting the smooth running of a busy production environment on a 4 on, 4 off shift pattern. This is a hands on role where you will be responsible for maintaining a wide range of manufacturing equipment, responding to breakdowns, carrying out planned maintenance. Key Responsibilities: • Service equipment according to planned maintenance schedules, • Respond to breakdowns as first line support, • Diagnose and repair faults on extrusion lines and moulding machines, • Maintain ancillary equipment, automated cells and butt fusion equipment, • Implement approved modification projects to capital equipment, • Perform mechanical and electrical work safely and efficiently, • Complete daily logs and data capture via CMMS system Who They’re Looking For: • Level 3 Electrical or Mechanical apprenticeship, HNC/HND or equivalent qualification, • 3 years' experience in a similar maintenance role, • Proven fault-finding and, • problem-solving abilities, • Experience with PLC fault-finding (desirable), • Knowledge of hydraulic and pneumatic systems (desirable), • Extrusion and injection moulding experience (desirable), • 18th Edition certification, desirable) Benefits: • Health Cashback Scheme, • Employee Assistance Program, • Cycle to Work Scheme, • High Street Discounts portal, • Salary Sacrifice Pension, • Life Assurance, • Health and Wellbeing programme, • On-site parking, • Subsidised canteen, • Enhanced Maternity and Paternity Pay Ready for a role where your maintenance skills can make a real difference to production? If you have the electrical and mechanical experience we are looking for, we would love to hear from you. Apply today to find out more

Job Title: Electrical Maintenance Engineer - Shifts Location: Derby area Pay Range: £50-53.5k plus overtime 8 Hour shifts Contract Type: Permanent Industry: Global Manufacturer Our client is a large Global manufacturer with a global footprint. It is an established site with an established engineering. Training, development, and support is provided on a manufacturing site. You will help the site make high-quality manufactured products, the site has been manufacturing for over 60 years. This market leading employer will welcome and encourage your new ideas, and you will be rewarded with the opportunity to learn and grow, achieving your career aspirations. Site investment and expansion continues. Key Responsibilities - Electrical Maintenance Engineer - shifts Your new challenge will be providing effective and efficient planned, preventative and breakdown maintenance to minimise losses to production Ensure the continuous running of the production process by eliminating downtime through a safe and logical approach to fault finding and maintenance of equipment Planned and reactive maintenance to keep downtime to a minimum You'll work with conveyor systems, PLC systems, motors and controls Leading electrical and instrumentation, repair, and working with a CMMS Diagnosis, resolution, and elimination of root causes Implementation of minor equipment modifications in support of increased performance Completion of all scheduled, planned corrective, reactive and improvement maintenance as allocated Contribute to the planning and implementation of allocated annual equipment overhauls Qualifications & Requirements - Electrical Maintenance Engineer - Shifts Apprentice trained or NVQ level 3 in an electrical engineering discipline in maintenance engineering Manufacturing Industry experience, heavy, medium or FMCG environments considered Routine Preventative Maintenance so an understanding of a PPM schedule Finding and fixing faults quickly and effectively A proactive approach to fault finding, a commitment to continuous improvement and personal development What we can offer - Electrical Maintenance Engineer - Shifts Work at a world-class, award-winning site Automated facility Opportunity for overtime Excellent pension Free onsite parking Health cash plan Reward and Recognition schemes Employee Discount Life Assurance For more information on this role, please contact Mike Butler on (phone number removed) or send a copy of your CV to (url removed) Candidates who are currently a multi-skilled engineer, electrical engineer, electrical technician manufacturing engineer, maintenance engineer , electrician , electrical engineer, Fitter electrical fitter, maintenance engineer, shift engineer or maintenance engineer may be suitable for this position. Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job‑seeking fees at any stage of the hiring process

Field Service Technician (Midlands) Location: Covering Birmingham to Sheffield Salary: £40,000 + Overtime + Bonus (OTE £50,000+) Hours: Monday to Friday, 08:00 – 16:30 The Company We are working with a leading provider of automated storage and retrieval solutions, delivering innovative systems that help customers maximise efficiency, productivity, and space utilisation. Operating across a range of manufacturing, engineering, aerospace, warehousing, and cleanroom environments, the business has built a strong reputation for delivering high-quality technology and outstanding customer support. The Role An exciting opportunity has arisen for a Service Technician to join a growing field service team covering the Midlands region. You will be responsible for the maintenance, fault finding, repair, and servicing of automated storage systems at customer sites. The role is predominantly electrical, although a basic understanding of mechanical maintenance is required. You will work independently, providing a high standard of customer service while ensuring all work is completed safely and efficiently. Key Responsibilities Electrical and mechanical fault finding, with a strong focus on electrical systems Carrying out planned preventative maintenance and reactive breakdown repairs Providing excellent customer service and maintaining strong customer relationships Completing service reports and documentation accurately and in a timely manner Working independently with minimal supervision Supporting colleagues and assisting the wider engineering team when required Ensuring PPE, tools, and equipment are maintained to company standards Following all quality, health, safety, and environmental procedures Requirements NVQ, City & Guilds, BTEC or equivalent electrical/electronic qualification Previous experience within a manufacturing, production, engineering, or industrial environment Strong electrical fault-finding skills Experience working on 3-phase systems and 415V equipment Ability to test and diagnose electrical control systems Basic mechanical maintenance skills such as bearings, drives, sprockets, and general mechanical components (training provided where required) Full UK Driving Licence Package & Benefits Basic Salary: £40,000 OTE: £50,000+ Company Mercedes Van (with private use) Door-to-door pay Overtime paid at Time and a Half Annual Bonus Scheme (typically around 10%, company performance dependent) Company Pension Scheme 25 Days Holiday + Bank Holidays Company iPhone, Laptop, Tools, PPE and Uniform provided Call Out Participation in a shared call-out rota with the wider UK engineering team (approximately 7 engineers nationwide) on an ad-hoc basis. If you are an electrically biased engineer looking for a field-based role with excellent earning potential and the opportunity to work on advanced automated systems, we would like to hear from you. If this role is of interest, please press apply or get in touch with Ryan Guy on (phone number removed) or

Job Title: Vehicle Technician Location: Derby, DE1 Company: auto-scan Pay Rate: £13.85 PAYE or £18.00 Ltd Company Duration: Initial 3-months About Us Auto-scan is a leading provider of quality assurance and inspection services to the automotive industry. With years of experience and a commitment to excellence, we partner with top automotive manufacturers to ensure the highest standards of quality and safety. The Role As a Technician, you will carry out hands-on mechanical and cosmetic modifications on commercial vans and 4x4s. Daily tasks include fitting pre-drilled plywood lining, applying scuff protection, and installing customer accessories such as tow bars, tie hooks, and alloy wheels. You will drive vehicles to and from the workshop compound, follow standardized build plans (TAKT times), scan vehicle IDs, and perform final Pre-Delivery Inspections (PDI) to ensure all work meets dealer specifications. This role requires a practical, mechanically minded approach and confidence using hand and power tools like spanners, wrenches, and powered screwdrivers. You will receive full training on all assembly processes, starting with a mandatory half-day onsite driving assessment, followed by a period working alongside an experienced technician. You will also assist with parts restocking during line stoppages to keep production moving. If you can read build instructions, follow set workflows, and take pride in quality workmanship, this role provides steady, practical work in a structured workshop environment. WORKING HOURS Mon - Fri Day Shift: 07:00 - 15:30 Compulsory Overtime is required to catch back production when it cannot be achieved within the standard working hours. This is typically 1 hour per shift (Finish 16:30) but can extend up to 2 hours. Overtime requirements are communicated daily around 14:00. Weekend Overtime is also required on an ad hoc basis to recover shortfalls against the build plan, typically, this will be a day shift on Saturday or Sunday. Please Note: All candidates must possess valid right to work in the UK without restrictions and must undergo a standard criminal record check (DBS). All applications will be treated in the strictest of confidence. We are NOT able to support Visa Sponsorship for this role. We DO NOT accept speculative CVs from Recruitment Agencies. Job Requirements Applying Scuff Protection - Apply a templated plastic protector inside the door handle area and apply a metal protector to the inside of the door sill. Plywood Fit Out - Fit pre cut, pre drilled plywood boarding to the floor and inside door and side panels of commercial vans Vehicle Conversion - Fit various customer-selected post-production customized parts to 4x4 Vehicles such as Tow Bar, Floor and side protection panels, Tie Hooks and Alloy Wheels. PDI - Inspect completed vehicles to a predefined standard before release to the dealer. Restocking parts to production areas - This activity fills idle time during production stoppages due to parts or vehicle shortages. Skills & Experience Practical Mechanical Aptitude: Mechanically minded with hands-on experience using basic hand and power tools (e.g., powered screwdrivers, spanners, wrenches, pliers, and measuring tools). Process & Workflow Adherence: Proven ability to read, understand, and strictly follow standardized process instruction workflows and technical build plans. Paced Environment: Comfortable working efficiently to set target times (TAKT time per vehicle) without compromising on quality. Basic Tech Literacy: Able to use handheld electronic scanners to log and track vehicle IDs throughout the production process. Communication: Clear verbal and written communication skills to liaise with team members and accurately complete documentation. Stay Connected: Follow us on LinkedIn to stay updated on the latest news and job openings at Auto-scan. Auto-scan is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. For More Information: Visit our careers site or contact our Recruitment team directly. Join Auto-scan and be a part of a team dedicated to driving excellence in the automotive industry! We are a Forces friendly employer, and welcome applications from the Armed Forces community. Benefits £13.85 PAYE or £18.00 Ltd pay rate Premium rates apply to weekend shifts Excellent manufacturing facilities Overtime available Family Friendly working hours Free on-site secure car parking * Collaborative team environment

Are you a hands-on engineer who enjoys solving technical problems, building machinery, and working directly with customers? We're looking for a Sealer Support Technician to join a growing specialist manufacturing business. This is a varied role combining workshop-based engineering with customer site visits across the UK, giving you the opportunity to develop your technical expertise while working on innovative packaging machinery. With all travel expenses covered and the chance to make a real impact, this is an excellent opportunity for a proactive engineer looking for a rewarding and diverse position. The Role As a Sealer Support Technician, you'll be responsible for supporting customers, assembling and maintaining sealing equipment, carrying out calibrations and repairs, and assisting with the continuous improvement of machinery and processes. Key Responsibilities Build, assemble and test sealing machinery from technical drawings. Carry out equipment calibrations, servicing and repairs both in-house and at customer sites. Manage spare parts stock levels and complete regular stock checks. Support customers with technical enquiries via phone and email. Assist with the development and improvement of packaging machinery and production equipment. About You We're looking for a practical and organised engineer with strong technical knowledge and excellent problem-solving abilities. Apprenticeship-trained engineer or qualified to HNC/HND level in a relevant discipline. Knowledge of mechanical, electrical, pneumatic and PLC systems. Ability to read and work from technical drawings. Strong communication skills with a customer-focused approach. Competent using Microsoft Office and maintaining technical records. What's In It For You? Salary of £34,000. 21 days holiday + Bank Holidays Employee assistance programme Health and wellbeing programme including health checks and reward days Bonus scheme after 12 months of employment Occasional UK travel with all travel expenses fully covered. Ongoing training and development within a supportive team environment. Interested? If you're a motivated engineer who enjoys a mix of technical hands-on work, customer interaction and UK travel, we'd love to hear from you. Apply today to take the next step in your engineering career

Revit Technician Permanent Location – Derby (Office-Based) Salary – Negotiable, dependent on experience A fantastic opportunity has arisen for one of our clients based in Derby, delivering high-accuracy topographical, measured building and underground utility surveys alongside advanced 3D Revit and BIM modelling, laser scanning and engineering setting-out services. The business works across construction, infrastructure, rail, energy and heritage sectors on projects ranging from complex heritage buildings to large-scale developments. With a sizeable in-house team, decades of experience and a reputation as a genuine one-stop survey-to-BIM partner, the business is now looking to appoint an experienced Revit Technician to strengthen its growing BIM team. As a Revit Technician, you will work closely with experienced surveyors, BIM coordinators and project managers, producing accurate 3D Revit models and BIM deliverables. Reporting into the BIM/CAD team, CAD/ Revit Technician will be overseeing model production across a variety of project types while supporting less experienced technicians. Candidates with a strong surveying background who are looking to progress from 2D AutoCAD drafting into full 3D Revit/BIM modelling will also be considered for this role. This role would also suit a candidates that has 1 or more years within the industry and wishes to take their next step in their career. Responsibility & Duties • Produce and manage detailed 3D Revit models from survey data, • Support point cloud to BIM model conversion and processing, • Review and quality-check models produced by junior CAD technicians, • Liaise directly with clients on model specification and requirements, • Ensure all Revit deliverables comply with agreed BIM standards, • Manage multiple Revit projects concurrently to meet deadlines Experience & Qualification • Proven experience working in Revit within a survey-related company, • Strong working knowledge of Revit and BIM workflows essential, • Experience producing models from point cloud and survey data, • Familiarity with AutoCAD and other CAD software advantageous, • Experience working from survey data or a survey-related environment essential, • Understanding of BIM standards and protocols advantageous, • Strong attention to detail and quality control skills, • Ability to manage own workload and meet deadlines, • Excellent communication skills, liaising with clients and site teams If you are an experienced Revit / CAD Technician and this role is of interest, please send your most up-to-date CV to the details below and get in touch straight away. (email address removed). co. uk (phone number removed) LinkedIn – pritesh tailor cad

The Production Technician, Cambridge, Cambridgeshire, will be expected to support production activities across assembly, testing, inspection, and quality assurance processes. How to apply: Apply now for the Production Technician role in Cambridge, Cambridgeshire. A Production Technician is sought to

The Production Technician supports the smooth and efficient flow of production activities by ensuring picked items are moved correctly between workstations and updating item statuses within the ERP system. This role plays a vital part in maintaining production accuracy, workflow continuity, and time

Tennial Personnel are actively seeking detail-oriented Production Technicians with pressure testing experience to join a growing, family-run manufacturing business based in Risby, near Bury St Edmunds.

An engineering and manufacturing business is seeking a skilled Production Technician to support workshop and production operations. Job Profile for Production Technician MC45669. Position: Production Technician - Electrical & Mechanical.

Job Title: Production Technician. Sector:Manufacturing | Production | Engineering.

Seeking a Production Technician/Operations Technician for a combined cycle gas turbine power station on the South Coast.

Electrical Production Technician | Cheshire | 37. They are growing and ambitious in their xxuwjjq plans for the future and are looking to recruit an Electrical Production Technician.

The Production Technician will assemble, test, troubleshoot, and diagnose electro-mechanical systems and components.

Impact Recruitment are recruiting for a Production Technician to join our client a specialist manufacturer based in Towcester.

Production Technician needed to operate gantry cranes and forklifts, supporting manufacturing processes.

Thanks to our state-of-the-art production equipment, we can respond flexibly to retailer demand.

Warehouse operative - Burton upon Trent.At Job&Talent, we are recruiting for a Warehouse operative to work with a leading bookseller in Burton upon Trent.This role involves essential warehouse duties to support the daily operations of a busy distribution site.Working any 5 days out of 7, including S

We are recruiting for the role of a Temporary Production Operative to join the team at Toyota Motor Manufacturing UK (TMUK). This position is perfect for those with prior experience as a production operative or warehouse operative.

Previous experience in an Assembly, Electro-Mechanical Assembly, Wiring, or Production Technician role.

Mego Employment LTD are excited to present a fantastic opportunity for a Production Operator to join our client's team working Modnay to Friday ( either 6am- 2pm or 2pm to 10pm or a night shift 10pm-6am ) This is a fixed-term assignment for a minmum of 2 months, with the potential for extensio

Many assembly roles involve repeating the same task, meeting production targets, then doing that again.

Record production data and ensure accurate product booking. Production Operative Days/Nights (12 Hour Shifts | 4 on / 4 off Rotation). We are seeking an experienced Extrusion Production Operative to join our night shift team within a busy manufacturing environment.

Job Location: Sunderland, Tyne & Wear.Rewards and Benefits on Offer;.Temp to Perm Opportunities available after a 6-month probation period.Identified Manufacturing Career Path for progression including Industry lead training and development.Leading Pay rates including higher overtime rates.A well-re

Pro-Found Recruitment are looking to recruit a number of Production Operatives to join our clients Extrusion & Lamination Production team based in Denby, near Ripley, DE5. The job roles and responsibilities of the Production Operative include:. Key skills required for the role of Production Operativ

Electro Mechanical AssemblerJob Title: Electro Mechanical AssemblerLocation: Farnborough Salary: £15.Job Type: Temporary to Permanent (6 months rolling contract with potential to go a lot longer) Hours: Monday to Thursday 7:30am – 4pm and Friday 7:30am –

If youve also worked in the following roles, wed also like to hear from you: Machine Operator, Manufacturing Operative, Process Operative, Production Technician, Factory Assistant, Production Assistant, Warehouse Operative, Manufacturing Technician, Manufacturing Assistant, Assembly Operative, Packa

Work collaboratively with colleagues to meet production targets and deadlines.