Trabajos system integration engineer en BoltonCrear alertas

A fantastic opportunity has arisen for an Electronic Systems Engineer to join a department to support system-level electronic design, integration, and equipment breakdown across complex electronic systems. Key Responsibilities: Lead and support system-level electronic design from concept through to production and deployment Define system architectures and break down complex electronic equipment into ... ZIPC1_UKTJ

Our client has an opportunity for a Production Test Engineer to join their team on a contract basis for 12 months. You will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements.\n\nRole: Production Test Engineer - Live Build\n Location: Stevenage - fully onsite\n Hours: 37 per week\n Hourly Rate: £32-£36 per hour via Umbrella, inside IR35\n Clearance: SC required before starting, UK Eyes Only due to project\n\nWhat you'll be doing:\n You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following:\n\nProviding test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment.\nTesting and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level.\nGenerating test specifications, operator instructions and technical reports - based on higher-level requirements and information.\nPromptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures.\nSupporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations.\n Requirements:\n Essential:\n\nMinimum HNC level of Engineering qualifications or equivalent.\nGood understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level.\nAwareness of electrical/electronic sub-system and system design, integration and test principles.\nGood verbal and written communication skills, including generation of test specifications, operator instructions and technical reports.\nAbility to plan and organise one's work according to assigned priorities.\n Advantageous:\n\nKnowledge of RF and Microwave technology at the subsystem level.\nExperience in operating manual and automated test equipment in an Electronics Manufacturing environment.\n\nIf you are interested in applying for this position and you meet the requirements, please apply immediately!\n\nLine Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity.\n\n"Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

MERITUS are recruiting for Manufacturing Engineers to join a leading Defence Manufacturing organisation as a part of their Assembly & Integration team.\n\nMANUFACTURING ENGINEER - BOLTON - 12 MONTH CONTRACT - £32 - 35 PER HOUR (INSIDE IR35) - SC ELIGIBILITY REQUIRED - SECTOR: DEFENCE MANUFACTURING\n\nAs a Manufacturing Engineer within a unit and missile assembly manufacturing facility, you will play a key role in helping ensure products are built efficiently, safely, and within budget. You will be a valued member of a collaborative Manufacturing Engineering team, supporting a range of multi-project manufacturing activities and contributing to continuous improvement across the build environment.\n\nKey Responsibilities\n\n Contribute as part of a supportive Manufacturing Engineering team within a complex assembly environment.\n Compile, maintain, and update Manufacturing Instructions to support consistent and effective production.\n Design, commission, and prove associated tooling, working closely with colleagues across engineering and manufacturing functions.\n Support the industrial validation process through tools such as FMEA's, FAI's, and related methodologies.\n Work collaboratively to identify and resolve technical issues that may arise during the manufacturing process.\n Support route card changes resulting from rework activities, ensuring clarity and accuracy are maintained.\n Help maintain Configuration Control through the embodiment of Design Modifications into Manufacturing Instructions.\n Support the Non-Conformance process using SAP, ensuring process integrity and timely resolution.\n\nSkills and Experience Required\n\n Formal technical Engineering/Craft Apprenticeship to NVQ Level 3 / TR23 / TR21 and Level 3 (ONC), or\n Formal further education certificate to HNC (or equivalent) with experience within an engineering discipline\n Minimum of 5 years' experience within an engineering discipline\n Ability to interpret engineering design drawings and translate them into clear Manufacturing Build Instructions for both skilled and semi-skilled operators\n Experience in electronic sub-assembly manufacture through to system-level builds\n Knowledge and experience of assembly processes for small/miniature electro-mechanical actuation systems\n Comfortable working within and contributing positively to a team-based environment\n Ability to recognise and understand customer requirements and respond in a considered and effective way\n Familiarity with company processes and procedures, and ability to work within them consistently\n Strong communication skills, with the ability to engage effectively within the team and across multiple levels of the organisation

Production Test Engineer\n\n12-month contract\n\nBased in Bolton\n\nOffering £37ph Inside IR35\n\nAre you an experienced Test Engineer?\n\nDo you have experience testing down to component level?\n\nDo you want to work with an industry-leading company?\n\nIf your answer to these is yes, then this could be the role for you!\n\nAs the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry.\n\nYou will be involved in:\n\nProviding test engineering support to operators on the shopfloor\nTesting and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level\nGenerating test specifications, operator instructions, and technical reports - based on higher-level requirements and information\nIdentify remedial and corrective actions\nSupporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations \n\nYour skillset may include:\n\nA good understanding of measurement and test principles, and associated equipment down to component level\nAwareness of electrical/electronic sub-system and system design, integration, and test principles.\nAn understanding of RF and microwave technology at subsystem level\nAn understanding of Environmental testing (including ESS)\nManual handling training\nESD training \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nProduction Test Engineer\n\n12-month contract\n\nBased in Bolton\n\nOffering £37ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

We’re an award-winning consultancy known for delivering exceptional products and services through technology. We work closely with organisations to help them accelerate value delivery and create outstanding customer experiences. Our purpose is simple: to empower organisations to make a real difference for people, society, and the planet through technology that’s efficient, user-friendly, and solves problems fast. At Burendo, we believe that together, we can achieve incredible things. We are currently seeking a Backend Engineer (Java) to join us on a 6-month contract basis, inside IR35, starting as soon as possible. This role is fully remote, offering flexibility in working location within the UK. While not essential, the ability to travel to the North of England on occasion would be advantageous. Must-Haves • Strong proficiency in Java and object-oriented programming principles, • Experience with Spring Boot or similar Java frameworks, • Proven experience designing and implementing RESTful APIs, • Hands-on experience with microservices architecture, • Solid understanding of database schema design, SQL, and query optimization, • Experience with performance tuning and scalability best practices, • Knowledge of caching strategies (e.g., Redis, in-memory caching), • Experience integrating with third-party and legacy systems, • Strong understanding of data integrity and security principles, • Experience with automated testing (unit, integration, and API testing), • Familiarity with version control systems (e.g., Git), • Experience with cloud platforms (AWS), • Experience participating in code reviews and collaborative development workflows, • Strong problem-solving skills and attention to detail Nice-to-Haves • Familiarity with containerization technologies (e.g., Docker, Kubernetes), • Knowledge of CI/CD pipelines, • Experience with message brokers (e.g., Kafka, RabbitMQ), • Exposure to event-driven architecture, • Experience contributing to system architecture and design decisions, • Understanding of DevOps practices, • Experience working in Agile/Scrum environments, • Competitive rate - Contract Inside IR35, • Remote Working, • Supportive consultancy environment We are committed to promoting equal opportunities in employment. You and any job applicants will receive equal treatment regardless of age, disability, gender reassignment, marital or civil partner status, pregnancy or maternity, nationality, ethnic or national origin, religion or belief, sex or sexual orientation #LI-Hybrid

At RemoteStar, we're currently hiring for one of our clients based in Houston, TX. Years of experience: 3 to 5 years Location: USA About Client: A fast-growing US-based SaaS company is transforming how energy firms manage operations. Their end-to-end ERP platform streamlines field data, production, finance, land, and compliance, delivering real-time insights and operational efficiency. With a strong client base and innovative tech, they’re redefining digital transformation in the energy and utilities sector. You’ll design and implement AI-driven functionality that improves automation and user experience. This includes leveraging LLMs, machine learning models, and modern AI tooling within a production SaaS environment. This is a hands-on role for someone who can move quickly, make pragmatic decisions, and bring AI concepts into real, scalable product features. Responsibilities • Design and implement AI-powered features within the platform (e.g., automation, recommendations, copilots) • Integrate LLMs and/or ML models into existing services and workflows, • Evaluate, select, and optimize AI tools, APIs, and frameworks for production use, • Collaborate with Product to translate business problems into AI-driven solutions, • Build and maintain scalable backend services to support AI functionality, • Profile, test, and optimize performance of AI-integrated systems, • Ensure reliability, security, and cost-efficiency of AI components in production, • Contribute to architecture decisions around AI integration and system design, • Partner with engineering teams to embed AI into existing applications without degrading stability Requirements • 3+ years of experience as a software engineer in a SaaS or cloud-based environment, • Strong backend engineering experience (RoR and/or Golang preferred), • Experience integrating APIs and working within distributed systems, • Hands-on experience with AI/ML tools (e.g., OpenAI, Anthropic, Hugging Face, or similar), • Experience building or integrating AI-powered features into applications (not just experimentation) • Strong understanding of data flow, system design, and performance optimization, • Experience with relational databases (SQL Server or similar), • Familiarity with microservices architecture, Kubernetes, and CI/CD pipelines, • Experience deploying applications in Azure or similar cloud environments, • Strong problem-solving skills with ability to work in ambiguous, fast-moving environments, • Builder mindset—someone who can take an idea and turn it into a working feature quickly, • Pragmatic approach to AI (focus on value, not hype), • Ability to work independently in a contract environment while collaborating closely with internal teams • Strong communication skills and ability to explain AI concepts to non-technical stakeholders Preferred • Experience with prompt engineering, embeddings, or retrieval-augmented generation (RAG) • Exposure to model evaluation, fine-tuning, or AI performance monitoring, • Experience with event-driven architectures or real-time data processing, • Background in energy, fintech, or other complex data-driven industries

Broster Buchanan are partnered global business within the food industry with a turnover of £8Bn+ who are looking for a Fabric Data Engineer to join as they set up an exciting new project team within the group. This would suit an experienced Azure Data Engineer with good Fabric experience looking to join a new, growing team with plenty of exciting projects and cutting tech on the horizon. This will be a mostly remote role but would suit someone near Liverpool, Birmingham or London as there will be ad hoc travel into the office when required for onsite meetings, workshops etc. 1-2 times per month. A salary of £55k - £65k + 10% bonus is on offer. Responsibilities: • Help set up and deliver the future direction of strategy and approach to the management, storage and usage of data, • Collaborate with their wider technology and business teams to ensure goals and visions are aligned and achieved, • Help with setting up the data warehousing and lake processes, including collaborating with their architecture teams to figure out what that will look like, • At times, guide and mentor the junior data engineers within the team, reviewing their ideas, providing feedback and identifying their knowledge gaps to support their development, • Design, develop, and manage data pipelines using Fabric Data Factory, • Leverage Fabric Data Integration for seamless data source integration, • Implement and maintain robust data governance frameworks with Fabric Data Management, • Create and maintain interactive dashboards and visualizations in Power BI and Tableau, • Collaborate with cross-functional teams to gather requirements and translate them into technical solutions, • Monitor and troubleshoot data processes, ensuring performance and reliability, • Document data workflows, processes, and system architecture Requirements: • Good experience with Azure technologies for Data Engineering, with 12 months or more using Fabric tools as part of real world projects, ideally through the end to end project lifecycle, • Strong experience with setting up and using big data storage solutions, including data warehouses, data lakes or data lake houses, • Able to build and demonstrate a solid understanding of the concepts of real time data streaming, batch data processing and data transformation processes, • Experience with core tools such as Data Factory, Databricks, Synapse, Kafka and Python, • Any exposure to data migration/ETL would be highly beneficial, with SQL/T-SQL, SSIS, SSRS and SSAS, as there is a large data migration project planned, • Any previous experience with setting up data governance and processes would be highly beneficial, • Good proficiency in Power BI and Tableau, • Strong knowledge of data integration techniques and ETL/ELT processes, • Experience with data modelling, data warehousing, and data governance best practices

About MILE MILE is the new members-only shopping destination redefining luxury commerce. We offer access to a curated, seasonless catalogue of the most sought-after products from globally renowned fashion houses—all at unmatched prices. Built at the intersection of technology and fashion, MILE delivers a seamless, elevated experience for both consumers and brands. Our mission is to become the leading digital destination for luxury—where exclusivity, value, and exceptional design converge. What We’re Looking For We're looking for a Senior Backend Engineer to join our growing engineering team. As an early technical hire, you’ll play a foundational role in shaping the systems that power our luxury commerce platform, from our membership model to product discovery, order management, and logistics. This is a high-impact role for someone who thrives in fast-paced, product-focused environments and wants to help build a company from the ground up. What You’ll Do • Design and implement scalable, high-performance backend systems to power our e-commerce experience., • Build and maintain APIs that support our frontend, mobile, and third-party integrations., • Architect systems for membership access, catalog management, checkout, order fulfillment, and payments., • Collaborate cross-functionally with product, design, and data teams to deliver features that elevate the user experience., • Own backend services end-to-end, from design to deployment and monitoring., • Contribute to best practices in code quality, testing, reliability, and observability., • Help define our backend architecture and make strategic technical decisions as we scale., • Mentor junior engineers and foster a culture of technical excellence and collaboration. Who You Are • 7+ years of experience building and scaling backend systems in production environments., • Genuine Rubyist having written custom DSLs and/or contributed to a major Ruby gem with the deepest knowledge of how to utilize Ruby’s metaprogramming capabilities for maximal terse and DSL-centric applications., • Experience with the specific challenges of concurrency, inventory management/reservation, currency/price management, and third party API integration system designs - push, pull, effective normalization, etc., • High familiarity with excellent microservices software design - using software DSLs over cloud deployed solutions - across dozens of models, concerns, and integrations., • Experience with relational databases (e.g., PostgreSQL) and familiarity with data modeling and performance optimization., • Familiarity with cloud infrastructure (e.g., AWS) and containerization (Docker, Kubernetes)., • Experience developing and deploying GraphQL and RESTful API interfaces., • Experience developing multi tenant systems, relating to concerns of access control, reporting, and authorization/authentication., • Strong understanding of system design, data structures, and algorithmic principles., • Comfortable working in high-growth, early-stage environments—bias toward action and strong product sense are key., • A collaborative teammate who communicates clearly and is excited to shape the future of a luxury tech brand. Bonus Points • Prior experience in e-commerce, marketplaces, or membership-based platforms., • Familiarity with event-driven architectures and message queues (Kafka, SQS, etc)., • Experience working closely with design or product teams in consumer-facing companies., • Passion for fashion, luxury, or retail innovation. Why Join MILE • Opportunity to play a key role in shaping the future of the company., • Collaborative and innovative work environment., • Career growth opportunities in a fast-growing organisation. Let’s build something people talk about. Together.

Software Engineer, Consensus - Anza Anza is a Solana R&D lab pushing the boundaries of blockchain performance and scalability. Anza was founded by experienced executives and core engineers solving the toughest problems in Web3. Crypto ecosystems rely on robust protocols, and we believe those are best built out in the open, with multiple contributors. We pioneer advanced solutions to meet the evolving demands of decentralized applications. As a Software Engineer specializing in consensus, you will play a critical role in fortifying Anza's Agave client and the broader Solana network. Your work will directly improve the efficiency and reliability of our blockchain infrastructure, ensuring robust, timely consensus mechanisms. You will focus on optimizing the processes that underpin the agreement on block validity and order, ensuring they are secure, performant, and scalable to support future growth. • Develop and Optimize Consensus Mechanisms: Design, implement, and optimize the mechanisms for consensus to enhance the throughput and stability of the Solana network., • Efficient Coordination: Develop and refine algorithms to ensure fair and efficient agreement on block production among validators., • Ensure Security and Integrity: Identify and mitigate potential security vulnerabilities within the consensus mechanisms, ensuring robust protection against emerging threats., • Scalability and Performance: Work on improving the scalability of the consensus system to handle increasing transaction volumes and validator participation without compromising on performance., • Testing and Validation: Create and execute comprehensive tests to validate the reliability and efficiency of the consensus mechanisms, including stress tests, fault injection, and performance benchmarking., • Collaboration: Collaborate with cross-functional teams, including core protocol engineers, security experts, and infrastructure teams, to ensure the seamless integration and functioning of the consensus components., • Documentation and Code Review: Maintain thorough documentation of the consensus protocols and conduct peer code reviews to uphold high standards of code quality and consistency., • Experience: A Bachelor's degree in Computer Science, Engineering, or equivalent practical experience and 3+ years of hands-on experience with core infrastructure software and distributed systems., • Technical Expertise: Strong proficiency in systems programming languages such as Rust or C++. Experience with consensus algorithms, distributed systems, and blockchain technology is highly desirable., • Problem-Solving Skills: Ability to analyze complex systems, identify potential issues, and develop effective, flexible solutions., • Security Mindset: Knowledge of common security threats and best practices in securing consensus processes., • Growth Mindset: Actively consuming research papers, designing, and investigating new solutions., • Performance Optimization: Experience with performance profiling and optimization techniques., • Collaboration and Communication: Excellent teamwork and communication skills, with the ability to work effectively in a collaborative environment., • Familiarity with Linux, systems automation tools, and systems architecture., • Understanding of networking, architecture, and principles underlying distributed systems., • A knack for designing secure protocols, software, and algorithms that minimize trust requirements., • Self-driven, research oriented, and the ability to learn independently., • Active participation in Bitcoin/Ethereum/Blockchain projects or the open-source community is highly desirable. We offer a dynamic, fast-paced environment where innovation and problem-solving are at the heart of everything we do. Here, your work will have a direct impact on the security and scalability of blockchain technology, contributing to the foundation of decentralized applications worldwide. We're excited to welcome individuals who share our passion for pushing the boundaries of blockchain technology. If you're ready to take on the challenge and contribute to the next generation of blockchain infrastructure, we'd love to hear from you. The salary range for US-based candidates will be determined throughout the interview process depending on experience, skill, and location. Candidates should anticipate an annual base salary (not including incentive compensation or other benefits) of $180,000 USD to $300,000 USD.

Senior Software Engineer (Rust / Robotics) West Midlands (Hybrid - can be remote for the right person) £600-£700/day (Inside IR35) | 2-3 months An engineering business in the West Midlands is looking for an experienced Senior Software Engineer to support a short-term project (2-3 months) and help get a key deliverable over the line. The role Work as part of a small, multi-disciplinary team across software, mechanical and electrical engineering. Focus on Rust development while contributing to wider engineering tasks. Support real-world deployment, working with Linux servers, data flows and system integration. What they're looking for Strong programming background with Rust (essential) Experience with C++ and solid computer science fundamentals Comfortable with Linux (development + server management) Exposure to hardware integration / real-world systems Familiarity with databases or Redis for data flows (desirable) PLC / automation experience is a bonus, but not essential The setup Day rate: £600-£700 (Inside IR35) Duration: 2-3 months (potential to extend) This is a great opportunity for someone who enjoys variety, working with modern tech in a small, agile team, and making an immediate impact on a live project.

We are always looking for passionate and talented software developers to join our geographically-distributed engineering team. If you do not think your profile can fit any of the other targeted job openings on our web site, as we are eager to learn more about you, just apply to this one and we will definitely look into your application. \n Key Responsibilities • Discussing technology with clients and represent Collabora at conferences and trade shows to demonstrate and promote our leadership in the open source arena, • Analysing client problems and designing solutions leveraging open source technologies and Collabora's technical expertise, • Defining and scoping client projects in collaboration with the delivery team, • Contributing publicly to open source projects to ensure Collabora's continuing technical leadership, • Gain working knowledge of customers’ products, applications, technical and business strengths and target markets, • Understanding client needs and reconciling time constraints, available technologies and resources, and open source best practices Desired Skills • Track record of experience in software development is essential, • Knowledge of open source development methodologies and good standing in the open source community, • Good English language skills (both verbal and written), • Ability to work and communicate in an online distributed environment, • Existing familiarity with one or more of Collabora's market verticals is preferable, • BS/BA or experience in the role of Engineer, • Demonstrable contributions to components in open source projects, • Preferable experience with direct development on one (or more) of WebKit, Blink, GStreamer, FFMPEG, libav, X11, wayland/weston, Jenkins, OBS, lava, Linux kernel/device drivers, distribution integration, porting, • Self learning skills to get sufficient knowledge of Collabora's services, business model, project delivery life cycle and other related technical domains \n Collabora is a software consultancy specializing in bringing companies and the Open Source community together. We combine years of Open Source software leadership with an understanding of the challenges that businesses, non-profits, and governments face. Collabora brings deep technical expertise in system integration & architecture, graphics, multimedia, web engines and communications to a number of market verticals, including mobile, IVI / automotive, set top box / smart TV, and a range of other specialized embedded applications. Collabora has the unique business model of enabling enterprises to leverage Open Source software in their solutions. Having worked with notable industry leading companies in the automotive, aerospace and handset mobile verticals amongst many others, Collabora has established a broad customer portfolio. #LI-Remote

Location: Hybrid, Newcastle or Remote (UK Based) Reports to: Head of Engineering Type: Full-time At Oak Engage, we’re on an exciting growth journey—backed by a major investment from NorthEdge to scale our impact and redefine the future of employee engagement. Trusted by some of the UK’s biggest brands, including Aldi, Five Guys, and ITV, we help organisations connect, engage, and empower their people through smarter, more personalised internal communication. With our next stage of expansion underway, we’re building a team of bold, ambitious thinkers ready to make their mark at a high-growth, purpose-driven SaaS company. If you’re looking to shape the future of work and grow alongside a company that’s going places, now’s the time to join Oak. We’re looking for a skilled Integrations Engineer (C#) to build and maintain the external integrations that power Oak’s platform. You’ll be working on everything from HRIS and identity integrations to bespoke APIs and third-party system connectors—helping our customers connect Oak seamlessly into their existing tech stack. This is a hands-on role ideal for someone who enjoys working with APIs, data mapping, authentication flows, and solving real-world integration challenges in enterprise environments. • Develop and maintain secure, scalable integrations between Oak and third-party systems (e.g. Azure AD, Workday, SAP, custom APIs), • Collaborate with customer success and implementation teams to support integration requirements, • Own authentication flows (OAuth2, SAML, etc.) and integration-specific APIs, • Maintain integration documentation and configuration guides, • Troubleshoot and resolve integration issues across customer environments, • Build reusable components and tools to streamline future integrations, • 3–5+ years of experience with C# and .NET (preferably .NET Core/.NET 6+), • Strong experience working with APIs, webhooks, and authentication protocols (OAuth, SAML), • Knowledge of enterprise integration patterns and secure data handling, • Experience with Azure services and identity providers a strong plus, • Great problem-solving and communication skills, especially in customer-facing scenarios, • A meaningful role in a mission-led SaaS company with strong growth and product-market fit, • The chance to work with household brands and solve real-world enterprise challenges, • Flexible hybrid or remote working options, • Private health insurance, life insurance, and Employee Assistance Programme (EAP), • Gym contribution and travel allowance, • Enhanced maternity, paternity, and discretionary leave, • Generous holiday policy (25 days + Bank Holidays + additional discretionary days), • Regular team socials and a positive, collaborative culture Hiring Manager Interview • Deep dive into architecture, problem-solving, and team contributions, • Assess communication and curiosity Technical Task or Live Pairing • Realistic, time-bound task or live coding session, • Use structured rubric for fairness (avoid freeform “whiteboarding”), • "Focus on team collaboration, code quality, and feedback" Peer Technical Panel/Culture Fit / CTO Chat - In person at our NCL HQ • Includes cross-functional devs, product manager or designer, • Assess long-term growth potential and alignment with tech principles, • Opportunity for candidate to ask strategic questions At Oak, we’re committed to building a diverse and inclusive workplace where everyone feels welcome, supported, and able to thrive. We believe that different perspectives make us stronger, and we actively encourage applications from people of all backgrounds, experiences, and identities — including, but not limited to, race, ethnicity, gender, age, disability, sexual orientation, and socio-economic status. We are an equal opportunities employer. All hiring decisions are based on business needs, role requirements, and individual qualifications — without bias or discrimination. If you require any adjustments to the interview process or the role itself to support accessibility, please let us know — we’re happy to help.

?? Polyglot Software Engineer ?? Hybrid - Southampton (1 day fortnightly) | ?? £60-80k + Equity | ?? Deep-Tech Startup | ? £60B Market Opportunity We're working with an early-stage deep-tech startup that's gunning for a slice of the £60B SQL database market - and doing so with serious technical firepower. Fresh off a £1.2M pre-seed and mid-way through a further £7M raise, they already have live enterprise customers and a product solving high-stakes, real-world problems. This is a true ground-floor opportunity - you'll be working on core product and platform decisions, right as they scale their UK engineering team. The Mission: They're building a platform that makes databases interchangeable - allowing enterprise applications to move seamlessly between different SQL databases (PostgreSQL, MySQL, Oracle, etc.) without rewriting core logic. Think: zero-downtime migrations, deep system integration, and high-performance virtualisation. What You'll Be Doing: • Building features for a next-gen database virtualisation platform, • Tackling performance, scalability, and system interoperability challenges, • Writing clean, well-tested code in multiple languages, • Working cross-functionally with product, DevOps, and architecture teams, • Helping shape the technical roadmap and scaling engineering processes What You'll Need: • Proficiency in 3+ languages (e.g., C++, TypeScript, Python, Java, Rust), • Strong fundamentals in algorithms, systems design, and data structures, • Experience with SQL databases (e.g., PostgreSQL, MySQL, Oracle), • Ability to pick up new tech fast and solve complex problems independently, • Comfortable operating in a fast-paced, early-stage environment Nice to Have: • Deep understanding of database internals or data migration, • Experience with Docker, Kubernetes, and cloud platforms (Azure, AWS, GCP), • Familiarity with CI/CD and DevOps tooling (e.g., GitHub Actions) The Stack: Linux, C++, TypeScript, PostgreSQL, LLVM Docker, Kubernetes, GitHub, Azure Why It's Exciting: ? Join at the inflection point - live customers, big funding round, rapid growth ahead ? Take ownership of core engineering challenges that actually matter ? Be part of building something technically ambitious and commercially disruptive ? Equity on offer - strong long-term upside This one's perfect for engineers who love tough problems, clean design, and working across languages and platforms. If that's you, drop me a message and let's have a chat. Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy.

CreatorIQ is the operating system for creator-led growth trusted by more than 1,300 global brands and agencies. We’re on a mission to make businesses more human, and humans more impactful. We operate by our values — be intentional, pursue excellence every day, embrace the journey together, and be a good human — every day. CreatorIQ has earned the title of best companies to work for in multiple programs, including BuiltIn LA and NY. It’s been named a Fastest-Growing Company in North America on the Deloitte Technology Fast 500™ for four years, was named a leader in IDC MarketScape: Worldwide Influencer Marketing Platforms for Large Enterprises in 2025, was named a Leader by The Forrester New Wave™: Influencer Marketing Solutions, and has been consistently recognized by G2 as a Leader, and is rated 5 stars on Influencer MarketingHub. We operate in a flexible work model that combines both in-person and remote work to boost collaboration, enhance innovation, and adapt to individual work styles. We're seeking passionate, innovative minds to join our journey. Be a part of our dynamic team and let's transform the industry together! Technical Account Manager As a Technical Account Manager at CreatorIQ, you'll serve as the senior technical partner for a portfolio of enterprise customers — sitting at the intersection of Customer Experience, Product, and Engineering. This is not a revenue-carrying role; there are no quotas, no upsell targets, no commission. You're here to make customers technically successful and to serve as the internal voice of their platform health. This role is critical to ensuring enterprise customer stability, technical confidence, and operational continuity across increasingly sophisticated customer environments. You'll partner closely with Customer Success Managers to ensure your accounts are fully configured, technically sound, and accelerating toward platform outcomes. Where CSMs own the relationship and business outcomes, you own the technical depth — integrations, data flows, product configuration, API health, and escalation triage. Serve as the dedicated technical point of contact for a named portfolio of enterprise accounts, alongside their assigned CSM Conduct regular technical health reviews — assessing integration health, API usage, configuration gaps, platform adoption blockers, and integration best practices that drive enterprise customer stability Lead technical customer workshops and escalation discussions as the technical lead for assigned accounts Proactively identify technical risks before they become escalations; build remediation plans and see them through Guide customers through complex platform configurations, custom reporting setups, and integration architecture for CreatorIQ's NextGen platform Translate customer business goals into technical requirements and platform configurations within CreatorIQ Own the technical success plan for each account — documenting integration specs, data flows, custom setups, and known risks Lead customers through complex technical transformations, platform changes, and operational scaling initiatives while ensuring continuity and customer confidence Partner with the Education team to identify knowledge gaps and feed them into training content and in-app guidance improvements Serve as the internal technical advocate for your accounts — escalating product gaps, bugs, and configuration issues with well-structured context and business impact framing Coordinate technical work streams across Product Support, Engineering, Product, and Implementation to ensure enterprise issues are prioritized, communicated clearly, and driven through resolution Provide customers with structured technical updates, remediation plans, risk assessments, and realistic delivery expectations during escalations Contribute to the CS-Product escalation framework by surfacing recurring technical patterns across your portfolio and translating them into actionable product feedback Partner with Implementation during complex onboarding engagements that require advanced technical scoping or platform customization Work with Product Support to ensure Tier 2/3 issues in your accounts are resolved quickly and with full context preserved Maintain accurate documentation of each account's technical configuration, integration architecture, and open technical issues in Notion and Zendesk Contribute to internal playbooks for common technical patterns, integration scenarios, and migration edge cases Track and report on technical health signals across your portfolio — flagging accounts that are technically at-risk before churn signals surface in the CSM layer 4–7 years in a Technical Account Manager, Solutions Engineer, Technical CSM, or Senior Support Engineer role within a SaaS company Experience owning technical relationships with enterprise-tier accounts — not transactional; strategic, named accounts Demonstrated ability to work across APIs, integrations, data pipeline concepts, and SaaS platform configuration without needing Engineering to hand-hold every step Familiarity with influencer marketing, creator economy, or social media data platforms is a strong plus — but coachable domain knowledge is acceptable Bilingual in technical and business: you can explain an API authentication failure to an engineer and a workflow misconfiguration to a CMO in the same day Strong project management instincts — you track open items, set realistic timelines, and close loops without being asked twice You write well and document thoroughly — your Notion pages, Zendesk notes, and escalation briefs are clear enough that a CSM can act on them without a Slack follow-up Calm under escalation pressure; you de-escalate with data and a plan, not reassurances Comfortable working autonomously in a remote environment while staying tightly coordinated with CSMs, Product Support, and Engineering Curious about AI, automation, and how technical tooling can make customer teams more efficient Confidence can sometimes hold us back from applying for a job. But we'll let you in on a secret: there's no such thing as a 'perfect' candidate. Have 50% of the criteria? Excited about this opportunity? Passionate about what we do at CreatorIQ? Please apply! CreatorIQ is a place where everyone can grow. People: work with talented, collaborative, and friendly people who love what they do. Guidance: utilize our learning platform to fully get the training and tools you’ll need to become successful here from your first day with us. Work/life harmony: 25 days vacation, floating and set holidays, wellness allowance, and paid parental leave. Stock options as part of our equity-sharing program. Healthcare coverage, encompassing mental health, physical therapies, dental, vision, cancer coverage, and more. Comprehensive perks program providing stipends for wellness, cell phone and internet, home office setup, mental wellness, professional development, plus occasional company-funded meal opportunities throughout the year. CreatorIQ is the operating system for creator-led growth. Trusted by more than 1,300 global brands and agencies—including Burson, Delta Air Lines, Google, LVMH, Nestlé, and Sephora—CreatorIQ unifies creator marketing across paid, owned, earned, commerce, and community into one seamless, enterprise-grade ecosystem. With industry-leading intelligence infrastructure, rigorous compliance and security standards, and integrations with Meta, Snapchat, TikTok, YouTube, and more, CreatorIQ empowers brands and agencies to harness the creator economy as a strategic growth engine. CreatorIQ is a global company headquartered in Los Angeles with offices in Austin, New York, San Francisco, London, Manila, and Warsaw. Learn more at and follow us on and. At CreatorIQ, we believe that diversity is the key to unlocking our full potential. We are committed to fostering an inclusive, equitable, and empowering work environment where everyone can thrive, regardless of race, ethnicity, gender, sexual orientation, age, religion, disability, or any other characteristic that makes us unique. By embracing our core values of being intentional, pursuing excellence every day, embracing the journey together, being a good human, and staying focused on what’s important, we create an atmosphere that promotes collaboration and growth. Join us to celebrate differences, innovate together, and be a part of a business that is disrupting the marketing industry. We understand that a comprehensive benefits package plays a significant role in your overall compensation. To gain more insight into the various components of our total compensation, _. AI Transparency Notice We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications and note taking during interviews. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please refer to our _.

Job Title: Infrastructure Engineer Location: Woking, UK – Hybrid Reports to: Infrastructure Manager Work schedule: Mon – Fri, 37.5 hours per week Who are VitalHub? VitalHub aspire to accelerate the delivery of digital transformation at scale, supporting healthcare organisations internationally to improve how they capture and analyse data. This helps enhance patient flow and enables better coordination of care across planned and unplanned services, mental health, workforce, and compliance. From patient-facing apps and in-hospital flow management to national system control centres supporting the provision of healthcare services across US, UK, Canada, Middle East & Australia, our solutions exist to deliver an eco-system of joined-up technical infrastructure and centralised data integration. The Opportunity: The Infrastructure Engineer will be working with the infrastructure team to manage the production estate of the UK business. They must ensure that best practices are implemented and used throughout the infrastructure. The successful candidate will be a highly motivated team player with the ability to manage changing priorities. They will be able to take direction and perform and complete tasks with minimal direction. They will have an attention to detail and take pride in the work and tasks they undertake. They will have excellent verbal and written communication skills and will be able to communicate effectively with technical and non-technical colleagues. The candidate will be ambitious to learn and looking to take the next step in their IT career. Your Responsibilities: • System monitoring, • Managing and carrying out environment checks, • Managing & deploying Patches/Updates, • Managing backups & restores, • Managing & deploying SSL certificates, • Managing & deploying anti-virus, • Server support & provisioning, • Disaster recovery and performance tests., • Network/Firewall support, • Documentation Skills: • Operating Systems i.e. Current Windows Server OS’ and Linux Platforms, • Deployment Tools (Intune, Jamf), • Infrastructure hardware including Compute, SAN’s and Networking, • Virtualisation, Microsoft Hyper V preferable, • Microsoft Azure and AWS, • Windows IIS, • SSL Certificate Management, • Microsoft SQL 2016/2019/2022, • Active Directory & domain services i.e. DNS, DHCP, GPO’s, • Network Switches, Firewalls (Fortinet and WatchGuard), Wireless Access Points, • Familiarity with Case management ticketing systems (Preferable FreshDesk), • Backup Tools and Software (Veeam or similar) Essential Experience: • Demonstrable experience operating in an Infrastructure Engineer role, • Industry recognised qualification or vocational training from a relevant provider e.g. Microsoft., • Demonstrable handson experience administering Microsoft SQL Server (2016/2019/2022), including installation, configuration, and maintenance tasks, • Proven experience working with Virtualization software (Predominantly Hyper-V, but other platforms would be a bonus)., • Demonstrable awareness/working knowledge of network principals i.e. TCP/IP, ports, VLAN's etc., • Practical experience to be able to demonstrate proficiency in managing firewalls, routers, switches and other network infrastructure. Nice to Haves: • Microsoft qualifications in relation to administration or networks (MCSE, MCSA, MCITP), • Knowledge and/or experience of SANs, • Knowledge and/or experience of working with Watchguard and Fortinet Firewall products, • Knowledge and/or experience of Microsoft 365 systems, • Knowledge and/or experience of Azure, • Knowledge and/or experience of AWS What do we offer? • Remote & flexible working, • 25 days holiday plus Bank Holidays, • Support to grow through professional learning & development courses!, • Employee Assistance Programme, • Inclusive approach to Diversity, Equity & Inclusion, • Events – networking and social, • PDP – progression & internal career opportunities, • Death in Service, • Regular training workshops Our Interview Process: • Initial screening call with the Talent Team, • Virtual interview with the Infrastructure Manager & Infrastructure Engineer – technical assessment, • Virtual interview with the Infrastructure Manager & Head of HR As an equal opportunities’ employer, VitalHub is committed to the equal treatment of all current and prospective employees and does not condone discrimination based on age, disability, sex, sexual orientation, pregnancy and maternity, race or ethnicity, religion or belief, gender identity, or marriage and civil partnership. We aspire to have a diverse and inclusive workplace and strongly encourage suitably qualified applicants from a wide range of backgrounds to apply and join VitalHub. If you require any reasonable adjustments during the recruitment process, please let the Talent Team know.

Who We Are At Firstup, our mission is to improve the employee experience at every moment that matters, large and small. As the communication pipeline for the world's workforce, we now serve 40 of the Fortune 100 companies, reaching and connecting more than 17 million employees daily. Our employees are experts in the employee experience, workforce communications and technology. Joining Firstup means joining a movement to make work better for every worker. As the world’s first intelligent communication platform, Firstup meaningfully engages employees at every moment from hire to retire, and delivers engagement insights to help companies support, promote and retain their talent. Our movement has taken root and is evident in our world-class customer base. Now we need your help. Ready to make a difference in the world? Job Summary The Sr. Software Engineer will join the team responsible for Firstup's public APIs, Agentic tools, third-party integrations with enterprise systems such as HRIS platforms, and shared platform services. You will deliver innovative, scalable solutions while constantly improving our approach to architecture, scale, availability, and fault-tolerance. You are an active user of Generative AI tools and coding agents, applying them daily to accelerate delivery and improve code quality. Design, build, and maintain public-facing APIs and Agentic tools that enable enterprise customers to integrate with and extend the Firstup platform. Develop and own integrations with external enterprise systems, including HRIS platforms such as Workday, SAP SuccessFactors, and Dayforce. Build and maintain shared platform services used across the wider engineering organisation. Write high-quality code (reliable, readable, efficient, testable, scalable, maintainable), provide thorough code reviews, and create comprehensive tests and documentation. Apply broad, in-depth knowledge to develop and maintain large-scale multi-tenant services in the cloud. Actively use Generative AI tools and coding agents in day-to-day workflows to improve code quality and accelerate delivery. Collaborate across teams on industry standards and best practices to help others solve complex problems. Design future-ready solutions and address architectural gaps using modern microservices and cloud-native patterns. Own production health for your services, contributing to on-call rotations, incident response, and post-incident reviews in a "you build it, you run it" environment. Identify, analyse, and resolve system availability, reliability, and performance issues, contributing to observability and resiliency improvements. Partner with Product Management and Design to translate business requirements into scalable technical solutions. Bachelor's degree in Computer Science or related field, or equivalent experience. 5+ years building reliable, performant applications and microservices. Strong proficiency in TypeScript and Node.js. Ruby experience is a plus. Proven full-stack experience across frontend (React.js), backend, and database layers. Technical depth in at least one specialisation: networking, security, serverless, event streams, or similar. Strong AWS experience, including compute, storage, networking, and monitoring. Excitement to build beautiful, intuitive products with a strong customer focus. Innate curiosity and a desire to learn and teach. Experience building and maintaining integrations with HRIS platforms such as Workday, SAP SuccessFactors, Dayforce, or similar enterprise HR systems. Experience with Kubernetes, Docker, and Helm. Experience with Datadog or similar observability and monitoring platforms. Demonstrated use of Generative AI tools or coding agents in development workflows. Experience in enterprise SaaS organisations, particularly HR Tech or regulated domains. Familiarity with ML/AI integration in production systems. Open-source contributions or a history of side projects. Why Firstup? Because you care - about people, the work you do, and the connections you make. Work is such a large part of life; it only makes sense to make it awesome. If you want to engage brilliant minds in a high-growth and inclusive environment where ideas are rewarded regardless of who they come from, join us. This is a rapidly changing space so if you thrive on ambiguity, are hungry for a challenge, and have the guts to speak your mind, you could be a perfect fit. We offer an excellent PTO program, great health benefits, a casual and friendly environment, remote work, and a leadership team who truly believes in your growth – both personally and professionally. Firstup is committed to providing equal employment opportunities to all applicants for employment and to all employees, without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, protected disability, veteran status, or any other protected status in accordance with applicable federal, state or local laws. #LI-TM1#LI-RemoteWe may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

About Us: DOHE is a global EdTech championing group headquartered in Singapore, with a branch in the United Kingdom.We are on a mission to transform education by leveraging technology responsibly to enhance educational quality and foster meaningful societal progress. We are building EdTech Hub, a global ecosystem designed to empower startups, foster collaboration, and strengthen innovation across the education sector worldwide.Through our Go-Together Accelerator Programme, we support EdTech founders in turning their vision into reality through tailored coaching and strategic support. Guided by our proprietary Navigator methodology, we create structured and efficient pathways to success for education innovators. Over the next decade, our ambition is to accelerate more than 5,000 EdTech startups globally Find out more _ EdTech Hub IT Team The EdTech Hub IT Team powers the digital foundation of our ecosystem. We design, build, and maintain secure, scalable, and reliable technology infrastructure that enables startups, partners, and stakeholders to collaborate seamlessly. From platform development and data management to cybersecurity and system optimisation, our team ensures that innovation is supported by strong and future-ready technology. By combining technical expertise with a deep understanding of the EdTech landscape, we help create an environment where startups can focus on growth — while we take care of the technology that drives it. We are building a high-impact core team of 9 professionals across engineering, product, and design. Detailed Job Descriptions are available for each role. Establish the design system on a modern framework and build the entire frontend for five portals plus EdTech Hub. Implement role-based access control and create interactive UIs that surface AI-generated reports and matching results. · Build all 5 portals and EdTech Hub frontend from scratch · Establish a shared component library and Design System · Implement role-based access control and authentication integration · Develop complex workflow UIs — multi-step approval, coaching sessions, diagnosis questionnaires · Build AI integration screens — report viewer, expert matching, recording uploads · Create monitoring dashboards, cohort tracking, and analytics views About Us DOHE는 싱가포르에 본사를 두고 영국에 지사를 운영하는 글로벌 EdTech Championing Group으로, 에듀테크 스타트업이 사회적 가치를 만들고 글로벌로 성장할 수 있도록 에코시스템 (EdTech Hub) 구축 , 글로벌 액셀러레이션 프로그램 (Go-Together) , 데이터 기반 Methodology(Naviagator)를 제공하는 에드테크 전문 그룹입니다. 현재 EdTech Hub, Go-Together 등 내부 핵심 업무 시스템을 고도화하며 글로벌 팀과 함께 일할 시스템 엔지니어를 찾고 있습니다. EdTech Hub IT Team EdTech Hub는 전 세계 에듀테크 스타트업 커뮤니티를 지원하고, 교육 혁신 생태계 전반의 협력을 강화하기 위해 설계된 글로벌 플랫폼입니다. DOHE Global은 현재 전 세계 스타트업의 성장을 지원하는 통합 EdTech Hub 플랫폼을 처음부터 새롭게 구축하고 있습니다. 우리는 이 혁신적인 여정을 함께할 9개의 핵심 포지션에 합류할 전문 인재를 찾고 있습니다. 모던 프레임워크를 기반으로 디자인 시스템을 수립하고, 5개 포털과 EdTech Hub 전체 프론트엔드를 구축합니다. 역할별 접근 제어를 구현하고, AI 백엔드가 생성한 리포트와 매칭 결과를 사용자에게 전달하는 인터랙티브 UI를 만듭니다. · 5개 포털 및 EdTech Hub 프론트엔드를 신규 개발합니다 · 공통 컴포넌트 라이브러리와 Design System을 구축합니다 · 역할별 접근 제어와 인증 연동을 구현합니다 · 다단계 승인, 코칭 세션, 진단 설문 등 복잡한 워크플로우 UI를 개발합니다 · AI 리포트 뷰어, Expert 매칭 결과, 녹취 업로드 등 AI 연동 화면을 구현합니다 · 모니터링 대시보드, 코호트 추적, Analytics 화면을 개발합니다 · · Senior frontend engineer · Significant relevant experience of building large-scale services with React / Next.js · Hands-on TypeScript experiences · State management and REST API / GraphQL integration experience · Responsive web and cross-browser experience · Business-level English fluency required — daily collaboration with a global team · Design systems purist. You obsess over component consistency and reusability, and build systems hand-in-hand with designers. · Complexity simplifier. You have a talent for turning multi-step processes into UIs users navigate without friction. · Ecosystem explorer. You actively explore the evolving frontend landscape and experiment with new approaches. · Multi-persona empath. You understand the context of five distinct user groups and design the right experience for each. Language TypeScript Framework Next.js 14+ (App Router) UI React · shadcn/ui · Tailwind CSS · Radix UI State Zustand · TanStack Query Testing Vitest · Playwright Deploy Vercel · Netlify Tooling Figma · GitHub · Cursor 시니어 프론트엔드 엔지니어 · React / Next.js 기반 대규모 서비스 개발 4년 이상 · TypeScript 실무 경험 · 상태 관리와 REST API / GraphQL 연동 경험 · 반응형 웹과 크로스 브라우저 대응 경험 · 비즈니스 수준의 영어 커뮤니케이션 능력 필수 — 글로벌 팀과의 일상적 협업 · 디자인 시스템에 진심인 분. 컴포넌트의 일관성과 재사용성에 집착하고, 디자이너와 긴밀하게 시스템을 함께 만들어가는 분입니다. · 복잡함을 단순하게 만드는 분. 다단계 프로세스를 사용자가 헤매지 않는 UI로 풀어내는 데 재능이 있는 분입니다. · 최신 생태계에 열려 있는 분. 프론트엔드 생태계의 변화를 적극 탐구하고, 새로운 접근법을 실험하는 분입니다. · 다섯 가지 사용자를 공감하는 분. 서로 다른 사용자 그룹 각각의 컨텍스트를 이해하고, 최적의 경험을 설계하는 분입니다. Language TypeScript Framework Next.js 14+ (App Router) UI React · shadcn/ui · Tailwind CSS · Radix UI State Zustand · TanStack Query Testing Vitest · Playwright Deploy Vercel · Netlify Tooling Figma · GitHub · Cursor Employment: • Working hours: Full-time 40 hours a week., • Location: Remote - South Korea based, • Contract: Fixed Term Contract

Olo is a leading SaaS platform accelerating digital transformation in the restaurant industry, by helping customers deliver more personalised and profitable guest experiences. As a result, our digital ordering, payment, and guest engagement solutions enable brands to do more with less and make every guest feel like a regular. While our roots are in NYC, we’re intentionally investing in Belfast and Northern Ireland as a key hub, with an established leadership presence, a local team, and community for the long term. This role is fully remote, offering you flexibility to work from anywhere within NI. Your new role In this role, you’ll join as a Senior Software Engineer on the ‘In-Store’ team, which is part of the wider ‘Order’ engineering group. The ‘In-Store’ squad is focused on building and improving the integrations with new and existing POS (Point of Sale) partners and systems. They ensure that customers orders successfully flow through the Olo ecosystem with a spotlight on revenue by driving critical SLA’s, uptime and overall performance when it comes to integrations with external partners. This position is perfect for someone who has experience in the POS domain or who has been building systems that integrate with external partner platforms. You’ll have the support of a highly experienced engineering team consisting of 8 engineers in one squad. On a management level, the team is led by a dedicated Engineering Manager. • Exhibit mastery of the ‘In-Store’ team’s domain, taking a leading role in the design and architecture of complex systems and influencing technical direction and strategy., • Own the delivery of large-scale features and projects, coordinating efforts across multiple teams and ensuring alignment with overall business objectives., • Provide mentorship and technical leadership to both junior and senior engineers, helping to grow the technical expertise within the team and fostering a culture of continuous improvement., • Collaborate closely with Product, Design, and other stakeholders to shape requirements, making architectural and technical decisions that balance quality, performance, and delivery timelines., • Ensure the implementation of high-quality, resilient, and scalable distributed systems, incorporating resilience mechanisms and best practices., • Lead troubleshooting and incident management efforts, taking a proactive role in resolving critical production issues and improving system reliability., • Advocate for and implements improvements in development practices, such as enhancing CI/CD processes, optimising infrastructure as code, and increasing test automation coverage., • Coordinate and lead cross-team technical initiatives, ensuring consistency and integration between various services and platforms., • Stay ahead of emerging technologies and trends, assessing new tools and techniques to enhance the team's capabilities., • Demonstrate ownership of the team's delivery pipeline, ensuring that code quality, testing standards, and deployment practices are continuously optimised., • Bachelor’s Degree in Computer Science, Software Engineering or equivalent practical experience., • 5+ years of experience in software engineering., • Expert Programming Skills: Advanced proficiency in the .Net and C# ecosystem, with experience in designing and implementing large-scale, complex systems., • Architecture & Design Expertise: In-depth understanding of architectural principles and patterns, particularly for distributed systems (e.g., microservices, event-driven architecture using Kafka)., • Resilience & Performance Optimisation: Skilled in applying resilience mechanisms and performance tuning practices to ensure system stability and efficiency at scale., • Cloud Infrastructure & DevOps: Proficient in managing cloud infrastructure and services (e.g., AWS, Kubernetes/EKS) and implementing DevOps best practices using CI/CD tools like GitHub Actions, Octopus Deploy, and Terraform., • Leadership & Cross-Team Collaboration: Demonstrate strong leadership and collaboration skills, with the ability to influence and guide technical efforts across multiple teams and ensure alignment with business objectives.About Olo Olo is a leading restaurant technology provider with ordering, payment, and guest engagement solutions that help brands increase orders, streamline operations, and improve the guest experience. Each day, Olo processes millions of orders on its open SaaS platform, gathering the right data from each touchpoint into a single source—so restaurants can better understand and better serve every guest on every channel, every time. Over 800 restaurant brands trust Olo and its network of more than 400 integration partners to innovate on behalf of the restaurant community, accelerating technology’s positive impact and creating a world where every restaurant guest feels like a regular. Learn more at _. _We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

World Class Defence Organisation is currently looking to recruit an Electrical Systems Engineer / Architect subcontractor on an initial 12 month contract. Your base site can either be from the companies Bristol, Stevenage or Bolton office. This role will be a hybrid position – 3 days per week onsite and 2 days remote. Hourly Rate: £85 (Umbrella). Contract Duration: 6 Months initially and then ongoing and long-term thereafter. Missile Electronic Architect Job Description: Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It’s an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: • Specifying/determining, • system electrical requirements, • interface definitions and characteristics between subsystems/equipment, • power architecture, including power budget and power profiles, • data communication and processing architecture, • requirements for EMC, bonding, grounding and screening, • signal safety, including routing of safety related signals, • Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration, • Reviewing and authoring reports, guidelines and processes, • Design assessments and analysis, • Working to defence/industry standards, • Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: • Project manage the equipment(s) on behalf of the project during development, qualification and manufacture, • Own the requirements on behalf of the project for the equipment(s), • Produce Statement(s) of Work for the associated design authority for the equipment(s), • Create and update plans showing activities for the equipment(s), • Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance, • Hold regular progress reviews with the design authority for the equipment(s), • Review qualification verification evidence, • Track and find resolution to equipment non-compliances, • Attend and support design reviews Skillset/experience required: Technical experience required: • electrical/electronics, • interface definitions, • knowledge of defence/industry standards, etc., • degree level qualification in a related subject, • systems engineering, • writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: • defence, • weapon systems, • power supplies, • actuators, • data communication, • sensors, • EMC, • Health Usage Monitoring Systems (HUMS), • Model Based Engineering (MBE)

About Us: DOHE is a global EdTech championing group headquartered in Singapore, with a branch in the United Kingdom.We are on a mission to transform education by leveraging technology responsibly to enhance educational quality and foster meaningful societal progress. We are building EdTech Hub, a global ecosystem designed to empower startups, foster collaboration, and strengthen innovation across the education sector worldwide.Through our Go-Together Accelerator Programme, we support EdTech founders in turning their vision into reality through tailored coaching and strategic support. Guided by our proprietary Navigator methodology, we create structured and efficient pathways to success for education innovators. Over the next decade, our ambition is to accelerate more than 5,000 EdTech startups globally EdTech Hub IT Team The EdTech Hub IT Team powers the digital foundation of our ecosystem. We design, build, and maintain secure, scalable, and reliable technology infrastructure that enables startups, partners, and stakeholders to collaborate seamlessly. From platform development and data management to cybersecurity and system optimisation, our team ensures that innovation is supported by strong and future-ready technology. By combining technical expertise with a deep understanding of the EdTech landscape, we help create an environment where startups can focus on growth — while we take care of the technology that drives it. We are building a high-impact core team of 9 professionals across engineering, product, and design. Detailed Job Descriptions are available for each role. AI/ML Engineer DOHE Global is using AI to reshape how startup consulting works. AI analyzes coaching sessions and generates reports, matches startups with the right experts, and in the long run, AI Agents will deeply analyze Problem-Solution Fit. This team turns all of that into reality. This is not a prompt engineering role. You'll design and build end-to-end AI pipelines — recording → transcription → summarization → coaching report. Fine-tune LLMs for domain-specific models and architect Multi-Agent systems. [한국어] About Us DOHE는 싱가포르에 본사를 두고 영국에 지사를 운영하는 글로벌 EdTech Championing Group으로, 에듀테크 스타트업이 사회적 가치를 만들고 글로벌로 성장할 수 있도록 에코시스템 (EdTech Hub) 구축 , 글로벌 액셀러레이션 프로그램 (Go-Together) , 데이터 기반 Methodology(Naviagator)를 제공하는 에드테크 전문 그룹입니다. 현재 EdTech Hub, Go-Together 등 내부 핵심 업무 시스템을 고도화하며 글로벌 팀과 함께 일할 시스템 엔지니어를 찾고 있습니다. EdTech Hub IT Team EdTech Hub는 전 세계 에듀테크 스타트업 커뮤니티를 지원하고, 교육 혁신 생태계 전반의 협력을 강화하기 위해 설계된 글로벌 플랫폼입니다. DOHE Global은 현재 전 세계 스타트업의 성장을 지원하는 통합 EdTech Hub 플랫폼을 처음부터 새롭게 구축하고 있습니다. 우리는 이 혁신적인 여정을 함께할 9개의 핵심 포지션에 합류할 전문 인재를 찾고 있습니다. · Build the end-to-end pipeline: recording → transcription → summarization → coaching report · Auto-generate Pre-Diagnosis Reports from survey responses and startup data · Design expert matching algorithms using startup profiles and diagnosis results · Architect and implement Multi-Agent systems · Fine-tune LLMs and train domain-specific models · Design prompts, build evaluation frameworks, manage model versions, and run A/B tests · Intensive Hands-on ML/AI experience · Building applications with LLMs · Model fine-tuning experience mandatory · Python-based AI/ML pipeline design and implementation · Hands-on experience with agent frameworks · NLP fundamentals and speech-to-text integration experience · Business-level English fluency required — daily collaboration with a global team · True believer in AI. You're convinced AI can genuinely change how people work — and you want to build it. · Pipeline thinker. You see the full flow: collection → preprocessing → model → serving → monitoring. · Experiment-driven. You thrive on rapid hypothesis → experiment → measure → improve cycles. · Domain-deep. You want to understand startup incubation deeply and design AI tailored to it. Tech Stack Language Python 3.11+ LLM GPT-5 · Claude · Gemini Framework LangChain · LangGraph · FastAPI ML PyTorch · Hugging Face Transformers STT Whisper · Google Cloud STT Vector DB Pinecone · Weaviate MLOps MLflow · Weights & Biases Infra AWS SageMaker / GCP Vertex AI · Docker DOHE Global은 AI로 스타트업 컨설팅의 패러다임을 바꾸고 있습니다. 코칭 세션을 AI가 분석하고 리포트를 생성하며, 스타트업과 전문가를 AI가 매칭하고, 장기적으로는 AI Agent가 Problem-Solution Fit을 심층 분석합니다. 이 모든 것을 현실로 만드는 팀입니다. 프롬프트 엔지니어가 아닙니다. 녹취 → 전사 → 요약 → 코칭 리포트라는 엔드투엔드 AI 파이프라인을 설계하고 구축합니다. LLM 파인튜닝으로 도메인 특화 모델을 학습시키고, Multi-Agent 시스템을 아키텍팅합니다. · 녹취 → 음성 전사 → 요약 → 코칭 리포트 자동 생성 파이프라인을 구축합니다 · 설문 응답과 스타트업 데이터 기반으로 Pre-Diagnosis Report를 자동 생성합니다 · 스타트업 프로필과 진단 결과를 활용한 Expert 매칭 알고리즘을 설계합니다 · Multi-Agent 아키텍처를 설계하고 구현합니다 · LLM을 파인튜닝하고, 도메인 특화 모델을 학습시킵니다 · 프롬프트 설계, 평가 체계 구축, 모델 버전 관리, A/B 테스트를 수행합니다 · ML/AI 실무 경력 · LLM 기반 애플리케이션 개발 · 모델 파인튜닝 경험 필수 · Python 기반 AI/ML 파이프라인 설계 및 구축 경험 · Agent 프레임워크 실무 경험 · NLP 기초와 음성 인식 서비스 연동 경험 · 비즈니스 수준의 영어 커뮤니케이션 능력 필수 — 글로벌 팀과의 일상적 협업 · AI의 가능성에 진심인 분. AI가 사람들의 일하는 방식을 실제로 바꿀 수 있다고 믿고, 그것을 직접 만드는 분입니다. · 파이프라인을 보는 분. 모델 하나가 아니라, 수집 → 전처리 → 모델 → 서빙 → 모니터링 전체를 설계하는 분입니다. · 실험을 즐기는 분. 가설 → 실험 → 측정 → 개선 사이클을 빠르게 돌리는 것이 즐거운 분입니다. · 도메인에 깊이 들어가는 분. 스타트업 인큐베이팅이라는 도메인을 이해하고, 거기에 맞는 AI를 설계하는 분입니다. Language Python 3.11+ LLM GPT-5 · Claude · Gemini Framework LangChain · LangGraph · FastAPI ML PyTorch · Hugging Face Transformers STT Whisper · Google Cloud STT Vector DB Pinecone · Weaviate MLOps MLflow · Weights & Biases Infra AWS SageMaker / GCP Vertex AI · Docker Language Python 3.11+ LLM GPT-5 · Claude · Gemini Framework LangChain · LangGraph · FastAPI ML PyTorch · Hugging Face Transformers STT Whisper · Google Cloud STT Vector DB Pinecone · Weaviate MLOps MLflow · Weights & Biases Infra AWS SageMaker / GCP Vertex AI · Docker Employment: • Working hours: Full-time 40 hours a week., • Location: Remote - South Korea based or open to global applicants, • Contract: Fixed Term Contract

Are you an engineer who enjoys building reliable systems and intuitive user experiences? Join Spotify’s Commerce Platform and help shape the Checkout experience for millions of users worldwide. You’ll contribute across the stack, grow your technical depth, and work on systems that directly support how users manage their relationship with Spotify. You’ll be part of the Checkout Domain, where we build and scale the purchase experience, from the moment a user selects an offer to what happens after they complete a transaction. Our teams work on services and surfaces that support billing, account updates, and post-purchase interactions that focus on building trust and retention. The work spans APIs, backend services, and user-facing components across web and mobile. This is a great opportunity to join a collaborative, product-focused team working in a space with real user impact and cross-functional reach. • Design, build and maintain scalable backend services (Java/Python) and be active in shaping our data pipelines that power Spotify’s internal Commerce platform, • Develop and enhance our user-facing layer and frontend SDKs (React/Typescript), • Be an active part of creating and evolving APIs and services that connect user experiences with internal Commerce capabilities, taking into account Product requirements, • Drive improvements to system architecture, performance, and developer experience, • Collaborate closely with a talented group of engineers, product managers, designers and data specialists across multiple teams, • Contribute to technical discussions and help shape platform decisions, • You have experience building and maintaining backend services (Java and/or Python) in large-scale, modern cloud environments (we use GCP), • You’re confident working across the stack, from building scalable APIs to developing intuitive, high-performing, modern frontend applications (React/TypeScript preferred), • You have experience in system design and service-to-service integration, • You bring an open and pragmatic mindset to solving complex problems, while actively connecting the dots across technical, product, and business to inform your approach, • You care about code quality, testability, and developer experience, • You communicate clearly, take initiative on projects and collaborate effectively in cross-functional settings, • Having experience in commerce or payments systems is a plus, • This role is based in London (UK), • We offer you the flexibility to work where you work best! There will be some in person meetings, but still allows for flexibility to work from home, • We ask that you come in three times per weekSpotify is an equal opportunity employer. You are welcome at Spotify for who you are, no matter where you come from, what you look like, or what’s playing in your headphones. Our platform is for everyone, and so is our workplace. The more voices we have represented and amplified in our business, the more we will all thrive, contribute, and be forward-thinking! So bring us your personal experience, your perspectives, and your background. It’s in our differences that we will find the power to keep revolutionizing the way the world listens. At Spotify, we are passionate about inclusivity and making sure our entire recruitment process is accessible to everyone. We have ways to request reasonable accommodations during the interview process and help assist in what you need. If you need accommodations at any stage of the application or interview process, please let us know - we’re here to support you in any way we can. Spotify transformed music listening forever when we launched in 2008. Our mission is to unlock the potential of human creativity by giving a million creative artists the opportunity to live off their art and billions of fans the chance to enjoy and be passionate about these creators. Everything we do is driven by our love for music and podcasting. Today, we are the world’s most popular audio streaming subscription service.

ALTEN is a global engineering and technology consultancy operating across over 35 countries worldwide. We partner with industry leaders across sectors including Aeronautics, Aerospace, Defence, Naval, Automotive, Energy, Rail, IT and many more to deliver innovative engineering solutions that drive technological advancement & support sustainable transformation. Our teams of passionate and agile engineers work on cutting-edge projects that shape the future of technology and sustainability. At ALTEN, we empower talented engineers to innovate, solve complex challenges, and deliver impactful solutions that build tomorrow’s world—today. Join us and start building tomorrow’s world today! As an Electro-Mechanical Systems Engineer, you will support the design, integration, and installation of complex electro-mechanical systems used within maritime environments. Working remotely as part of a distributed engineering team, you will contribute to the development and integration of equipment across naval and marine platforms, ensuring reliable performance in demanding operational conditions. This role is suited to an engineer with strong CAD capability in Solid Edge and hands-on experience supporting system integration or installation activities, ideally within naval, offshore, or maritime settings. • Location: Poole, • On Site: Yes, • Clearance: None, • Experience Level: Mid-Level Key Responsibilities: • Develop and modify electro-mechanical designs using Solid Edge., • Support the integration of mechanical and electrical systems within maritime platforms., • Contribute to equipment installation planning and system layout development., • Work with multidisciplinary teams to ensure systems meet functional and environmental requirements., • Provide technical input during system integration, testing, and commissioning phases., • Assist in resolving design and integration challenges across complex platforms., • Ensure designs and integration activities align with engineering standards and project requirements. Required Skills: • Strong experience using Solid Edge (essential)., • Proven experience working with electro-mechanical systems., • Background supporting system integration, installation, or equipment fit-out., • Ability to work collaboratively across remote engineering teams., • Strong problem-solving and practical engineering mindset. Required Qualifications: • A Bachelor’s or Master’s degree in Engineering, or equivalent military experience. Desirable Skills: • Experience working with electro-mechanical systems in maritime or naval environments., • Experience installing or integrating equipment on maritime platforms (e.g., submarines, surface ships, or offshore vessels)., • Familiarity with the constraints and requirements of marine operating environments. Why join us? We bring together entrepreneurial, tech-driven people to deliver innovative solutions for leading companies. At ALTEN, you’ll work on exciting projects, supported by ongoing learning, mentoring, and clear career development tailored to your goals. Join a passionate team and help build tomorrow, today. In short you get: • A personalised career path and a rewarding management style, • A huge diversity of engineering projects and industries, • Private Medical Insurance, • Cycle & Tech Scheme, • Employee assistance programme, • Life insurance & Pension Scheme, • Social atmosphere, regular gatherings & team buildings, • Flexible way of working (role dependent) We are proud to support the Armed Forces Covenant & actively encourage applications from members of the Armed Forces community, including veterans, reservists, service leavers, and military spouses/partners. We recognise the value of military skills and experience and are committed to ensuring that no applicant is unfairly disadvantaged during our recruitment and selection processes. This role may require you to have or be willing to go through Security Clearance. As part of the onboarding process candidates will be asked to complete a Baseline Personnel Security Standard; details of the evidence required to apply may be found on the government website Gov.UK. If you are unable to meet this and any associated criteria, then your employment may be delayed, or rejected . Details of this will be discussed with you at interview.

We're looking for a skilled Platform Engineer with experience in IAM (Identity & Access Management) and strong experience in Agile delivery to support product development and technical enablement across multi-disciplinary teams. Key Responsibilities • Collaborate with teams to map user stories to platforms and build secure, scalable services, • Develop hardened base containers and support platform build activities, • Identify delivery risks and promote best practices across engineering teams, • Define QA, integration and deployment pipelines for secure, automated delivery, • Drive adoption of emerging DevOps tools and improve support processes, • Ensure smooth transitions of new products into service aligned to the product roadmap Essential Skills & Experience • Passion for IAM and experience developing secure systems, • Experience delivering against a product roadmap in Agile environments, • Strong background in system design, integration, software development & testing, • Familiarity with the SFIA framework - including levels:, • SWDN (Level 5), PROG (Level 4), TEST (Level 3), SINT (Level 5), DATM (Level 4), ASUP (Level 4) Desirable Skills • Previous hands-on experience with IAM tools or platforms, • Agile certification (e.g. Scrum, SAFe, or GDS-aligned), • Strong written and verbal communication, including stakeholder reporting Reasonable Adjustments: Respect and equality are core values to us. We are proud of the diverse and inclusive community we have built, and we welcome applications from people of all backgrounds and perspectives. Our success is driven by our people, united by the spirit of partnership to deliver the best resourcing solutions for our clients. If you need any help or adjustments during the recruitment process for any reason, please let us know when you apply or talk to the recruiters directly so we can support you.

STARK is a new kind of defence technology company revolutionising the way autonomous systems are deployed across multiple domains. We design, develop, and manufacture high-performance unmanned systems that are software-defined, mass-scalable, and cost-effective. This provides our operators with a decisive edge in highly contested environments. STARK is bringing its expertise in software-defined unmanned systems to the maritime domain. Traditional fleets alone cannot safeguard this vast, critical space. Unmanned Surface Vessels (USVs) extend naval reach at lower cost and reduced risk to personnel. Our maritime family of systems is AI-enabled and built for reliable performance in the harshest seas, delivering NATO a fully integrated hardware–software capability for scalable ISR and strike operations. As the Lead Software Engineer (Maritime), you will take full ownership of STARK’s maritime software capability. This is a pivotal "player-coach" role: you will lead the overall maritime software development strategy while remaining deeply hands-on in the code. Your primary mission is to build, lead, and mentor a high-performing team of engineers to integrate autonomous sea systems into the Minerva front-line platform. You will architect modern C++ solutions that bridge the gap between front-line control and edge computing, ensuring our fleet remains reliable, precise, and mission-ready in unpredictable environments. Team Leadership & Growth: Actively lead and build the maritime software engineering team. You will be responsible for hiring, mentoring, and developing talent to expand our maritime footprint. Technical Ownership: Lead the overall software design, development, and integration for maritime systems within the Minerva ecosystem. Hands-on Development: Design and implement core C++ architecture for autonomy, control, and communication subsystems. Engineering Excellence: Establish technical foundations, define interfaces, and enforce modern C++ standards through rigorous code reviews and best practices. System Integration: Collaborate closely with hardware and systems engineers to ensure software performs flawlessly on physical autonomous platforms. Delivery Pipelines: Build and manage robust software delivery pipelines for maritime applications, spanning from edge devices to front-line interfaces. Mission Readiness: Define quality benchmarks to ensure all maritime systems are cohesive, resilient, and ready for deployment in harshest sea states. Expert C++ Developer: Extensive hands-on experience in modern C++ with a "lead by example" approach to coding. Proven Leadership: Experience leading technical teams or a strong desire to transition into a formal leadership role while staying hands-on. System Architect: A deep understanding of software architecture, integration, and high-level system design. Domain Expertise: Background in real-time, embedded, or safety-critical systems (e.g., Automotive, Aerospace, or Defence). Autonomous Systems: Familiarity with autonomous control systems, such as autopilots, guidance algorithms, or vehicle dynamics. Hardware Interface: Practical experience working with physical hardware, sensors, and complex data communication systems. Security: Must be security-cleared or eligible to obtain UK/EU defence-level clearance. SECURITY CLEARANCE Due to the nature of our work in the defence sector, candidates must be eligible to obtain and maintain the appropriate security clearance required for this position. Details will be provided during the recruitment process. EQUAL OPPORTUNITY We are an equal-opportunity employer committed to fostering a diverse and inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, national origin, disability, or any other characteristic protected by applicable law.

Who We Are At Firstup, our mission is to improve the employee experience at every moment that matters, large and small. As the communication pipeline for the world's workforce, we now serve 40 of the Fortune 100 companies, reaching and connecting more than 17 million employees daily. Our employees are experts in the employee experience, workforce communications and technology. Joining Firstup means joining a movement to make work better for every worker. As the world’s first intelligent communication platform, Firstup meaningfully engages employees at every moment from hire to retire, and delivers engagement insights to help companies support, promote and retain their talent. Our movement has taken root and is evident in our world-class customer base. Now we need your help. Ready to make a difference in the world? Job Summary We're looking for a Senior Full Stack Engineer who thrives at the intersection of craft and scale. You'll design and deliver large-scale, multi-tenant cloud services — with a relentless focus on availability, fault-tolerance, and elegant architecture. You'll set the bar for engineering quality and help elevate those around you. Core Engineering & Ownership: Build and own scalable SaaS applications end-to-end — frontend, backend, and data layers. Write production-grade code that is reliable, readable, efficient, and testable. Raise the bar through thoughtful code reviews and comprehensive documentation. System Architecture: Design future-ready architectures and proactively close gaps before they become problems. Performance & Reliability: Drive system availability and performance — investigate, analyze, and resolve reliability issues across the stack. Recognize opportunities and advocate for better performance and efficiency of software, systems, and processes across teams. Shift Left Testing & Quality: You champion a rigorous 'shift-left' quality culture, embedding comprehensive testing—unit, integration, and contract—early and continuously in the development lifecycle, not as an afterthought. AI Integration: Leverage and advocate for AI-assisted tools (e.g., GitHub Copilot, Claude) to accelerate development while maintaining rigorous engineering judgment and accountability for code correctness. Leadership: Drive team-wide best practices, conduct quality code reviews, and mentor engineers to elevate overall engineering quality. Collaboration (Product & Design): Partner with Product and Design to translate requirements into intuitive UI, making informed technical trade-offs in the face of ambiguity. Collaboration (Engineering Standards): Champion engineering best practices across teams and collaborate on solving complex, high-impact problems. Bachelor's degree in Computer Science or related field, or equivalent experience. 5+ years building reliable, performant applications and microservices in production environments. Proven full stack fluency - you're comfortable across frontend, backend, and the database layer. A polyglot mindset — you evolve with the tech. Familiarity with Ruby on Rails, TypeScript, Node.js, or React.js is a strong plus. Proven full-stack experience across frontend (React.js), backend, and database layers. Technical depth in at least one engineering domain: distributed systems, multi-tenant SaaS, application databases, networking, security, serverless, event streaming, or similar. A genuine drive to build beautiful, intuitive products with the customer always in focus. Innate curiosity — you love learning and have a desire to teach and lift others. Strong communication skills and openness to collaborative idea-sharing across teams. • Core Stack Experience: Familiarity with Ruby (including Ruby on Rails), TypeScript, Node.js, or React.js is a strong plus. Why Firstup? Because you care - about people, the work you do, and the connections you make. Work is such a large part of life; it only makes sense to make it awesome. If you want to engage brilliant minds in a high-growth and inclusive environment where ideas are rewarded regardless of who they come from, join us. This is a rapidly changing space so if you thrive on ambiguity, are hungry for a challenge, and have the guts to speak your mind, you could be a perfect fit. We offer an excellent PTO program, great health benefits, a casual and friendly environment, remote work, and a leadership team who truly believes in your growth – both personally and professionally. Firstup is committed to providing equal employment opportunities to all applicants for employment and to all employees, without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, protected disability, veteran status, or any other protected status in accordance with applicable federal, state or local laws. #LI-TM1#LI-RemoteWe may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

World Class Defence Organisation based in Stevenage, Hertfordshire is currently looking to recruit a C++ Software Engineer subcontractor on an initial 12 month contract, with very likely extension. The role will be onsite 4 days per week. A 4 day working week is OK (Monday to Thursday). Candidates with a strong C++ Software Engineering / Embedded Software Engineer background ideally from the Defence / Aerospace industry would be suitable for this position. Rate: £67.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Stevenage Hybrid / Remote working: The role will be onsite 4 days per week. A 4 day working week is OK (Monday to Thursday). Duration: 12 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Interview process: One stage video interview Job Description: By embracing the latest software technologies and methods the Development Simulation software department delivers exceptional software solutions for non-production based test systems that meet the unique requirements of the prime software development teams. In addition we also provide equipment simulation systems to support product integration as well as software to support and assist the manufacturing process. The successful candidate will join the development team responsible for building and integrating real-time test and data capture systems. The role will focus on developing and maintaining software in a Linux environment, working closely with high-speed multi-channel SFPDP cards, real-time data flows, and complex multi-threaded processing pipelines. Proficient in C++ and with knowledge of C#, you will play a critical part in the design, development, integration, and verification of test software solutions that are central to our system validation and delivery capabilities. Responsibilities: • Design and develop real-time test and capture software on Linux systems using C++., • Integrate and interface with high-speed SFPDP cards across multi-channel data pipelines., • Architect and implement robust, scalable, and maintainable multi-threaded applications., • Define and implement data sequencing and synchronisation logic to support deterministic capture and replay., • Work with hardware teams to ensure seamless integration and timing alignment between software and capture cards., • Lead and contribute to system integration, verification, and testing at both component and system levels., • Conduct performance analysis, debugging, and optimisation of real-time systems., • Document architecture, interface definitions, and test procedures to support handover and formal test activities. Skillset/experience required: • Extensive experience in C++ development in a Linux environment., • Proficiency in C# for tooling, test interfaces, or Windows components as needed., • Proven experience working with real-time data systems, preferably involving SFPDP or other high-speed digital protocols., • Demonstrable skills in multi-threaded and concurrent programming., • Experience with low-level I/O, DMA, or driver-level interactions with PCIe cards or similar., • Familiarity with software sequencing frameworks or custom state machines for test execution., • Strong experience with integration, system test, and debugging complex interactions between software and hardware., • Strong understanding of software design principles, memory management, and performance optimisation., • Experience with version control systems (e.g., Git) and CI/CD Desirable Skills: • Experience with SFPDP (Serial Front Panel Data Port) specifically in defence, aerospace, or data acquisition contexts., • Knowledge of FPGA-based data acquisition systems and synchronisation methods., • Familiarity with unit testing frameworks, automated test rigs, or hardware-in-the-loop (HWIL) setups., • Experience developing or integrating with real-time operating systems (RTOS) or using real-time Linux extensions.

About TetraScience TetraScience is the Scientific Data and AI Company building Tetra OS, the operating system for scientific intelligence. We help the world’s leading life sciences firms turn fragmented scientific data into AI-native assets and scientific workflows that accelerate discovery, development, and manufacturing. TetraScience’s growing ecosystem of strategic partners includes NVIDIA, Databricks, Thermo Fisher Scientific, Snowflake, Google, and Microsoft. In connection with your candidacy, you will be asked to carefully review “_,” authored by our CEO, Patrick Grady; it is impossible to overstate the importance of this document, and you should take it literally as you decide whether our mission, culture, and expectations are right for you. What You Will Do TetraScience is looking for a Technical Enablement Lead / Developer Relations Lead for the EU. The ideal candidate should have expertise in customer and field enablement, adult learning principles, educational program creation, use case architecture and implementation, and a genuine passion for Data and AI technologies. The candidate should be driven by a desire to educate and inspire, and have the technical skills to quickly prototype new ideas and solutions. And finally, the candidate should seek to ensure developers can be successful with minimal friction, and champion product and process changes that make this a reality. You will work to understand the needs of different user personas (data scientists, machine learning engineers, scientists and R&D IT analysts), analyze their data environment, assist in the design and implementation of self-service solutions, and create training artifacts to accelerate adoption and growth. This is a technical enablement role, interfacing between internal and external stakeholders including; sales teams, technical teams, customers and potential customers. Your expertise not only covers the technical aspects of data integration, storage, access and architectures but also includes the skills to convey complex technical concepts in a way that aligns with business needs and potential solutions. Your work will directly impact how developers adopt TetraScience’s Scientific Data & AI Cloud, leverage new platform capabilities, and innovate in our ecosystem. You’ll collaborate closely with Product, Platform Engineering, Field Engineering, Customer Engagement & Support, Sales, and Marketing teams to empower customers, technical field team members, and all customer-facing technical roles through exceptional enablement programs. You’ll set the strategy for EU developer experience and community, including partners, customers, and independent developers; and be responsible for how developers discover, onboard, build, and scale applications. This role will be pivotal in growing our developer ecosystem, gathering crucial feedback to inform product development. Your work will educate and inspire the biopharmaceutical industry as to the power of an open ecosystem where precisely engineered scientific data flows freely and without restrictions. Your success in this role will directly shape TetraScience's growth trajectory and market position while ensuring our platform is accelerating science and patient outcomes across countless use cases. Responsibilities • Scientific & Domain Expertise, • Deep understanding of pharmaceutical/life sciences R&D workflows, data, and scientific principles, • Ability to engage credibly with data scientists, lab scientists, and R&D IT stakeholders, • Technical Skills, • Able to code and build practical solutions using scientific data platforms, pipelines, and apps, • Translate complex technical problems into working implementations within a pharma context, • Training & Enablement, • Design and deliver in-person training sessions, workshops, and demonstrations for both technical and non-technical audiences, • Create supporting materials: tutorials, documentation, sample code, and best practice guides, • Communication & Collaboration, • Translate technical and scientific concepts into clear, accessible language for non-technical stakeholders, • Collaborate with Product, Engineering, and UX teams to surface customer feedback as actionable requirements Must Have: • 2+ years professional experience in a Life Sciences company and/or a scientific background, • 3+ years professional experience as data scientist, scientific data engineer, or solutions architect, • 2+ years professional experience in technical enablement and/or developer relations, • Solid experience running large scale enablement programs, and how to evangelize and roll out the programs effectively across the organization, • Exceptional communication, storytelling, and presentation skills, coupled with a strong executive presence and the ability to effectively influence and engage large audiences, • Strong technical background with hands-on experience in SQL, Python, and modern data stack technologies, • Deep understanding of drug discovery, development, and manufacturing processes, • Ability to travel regularly to customer locations and whiteboard the product strategy with them, • Experience with data governance, privacy, and compliance considerations, • Exceptional stakeholder management skills with ability to influence C-level executives, • Ability to deal with ambiguity and thrive in a constantly changing and evolving work environment, • Experience working with high-bandwidth and high-energy professionals, • Insatiable curiosity to learn, develop, and grow year-over-year, • Great interpersonal skills and an ability to coordinate and drive initiatives supporting multiple teams Nice To Have: • Experience at high-growth SaaS companies with complex data needs, • Previous experience as a practicing bench scientist is highly valued, • Previous experience within a biopharma company in an IT related function is a big plus, • Background in technical support / field service highly valuable - this demonstrates your ability to internalize complexities and tailor explanations for a given audience, • Familiarity with enterprise sales processs within the pharmaceutical sector, • Experience with AWS application stack, • Competitive Salary and equity in a fast-growing company., • Supportive, team-oriented culture of continuous improvement., • Generous paid time off (PTO)., • Flexible working arrangements - Remote work. We are not currently providing visa sponsorship for this position

At Docker, we make app development easier so developers can focus on what matters. Our remote-first team spans the globe, united by a passion for innovation and great developer experiences. With over 20 million monthly users and 20 billion image pulls, Docker is the #1 tool for building, sharing, and running apps—trusted by startups and Fortune 100s alike. We’re growing fast and just getting started. Come join us for a whale of a ride! Join Docker's AI engineering team to build the future of containerized AI agents. Docker containers are the perfect vehicle to host and run AI agents - providing isolation, portability, and reproducibility. You'll be working on cagent, our open-source project (_), and expanding on it to enable developers to build, deploy, and scale intelligent agents using Docker's container technology. This is a greenfield opportunity to shape how developers leverage containers for AI agents at massive scale. You'll work alongside a team of seasoned engineers, collaborating with our sister teams working on Ask Gordon and Docker's broader AI platform. This is a unique opportunity to combine cutting-edge AI techniques with container technology to solve real-world developer problems. Please note: this role is only available to candidates currently located in London (or reasonable commuting distance to London). We are unable to make exceptions to this location requirement. As a Staff Engineer, you will partner with the engineering leadership to help set technical direction and serve as a guide and mentor as the team grows and matures Build Containerized Agent Systems: Design and implement systems that leverage Docker containers as the ideal runtime for AI agents, ensuring isolation, scalability, and portability Expand cagent: Maintain and evolve the open-source cagent project, adding new capabilities for containerized agent deployment and orchestration Agent Runtime Development: Build robust infrastructure for packaging, deploying, and managing agents in containers RAG Integration: Enhance agent capabilities with Retrieval-Augmented Generation systems to provide contextual knowledge and domain expertise (secondary focus) Evaluation & Testing: Design robust evaluation frameworks to measure agent performance, reliability, and containerized deployment effectiveness Rapid Prototyping: Iterate quickly on new agent capabilities and deployment patterns, moving from concept to production efficiently Open Source Community: Engage with the cagent community, review contributions, and help grow the ecosystem Cross-functional Collaboration: Work closely with product managers, designers, and engineers across Docker's AI teams to integrate containerized agent capabilities into Docker's developer experience On-Call Rotation: Take part in on-call rotation for your team; respond to incidents, debug production issues, and drive continuous improvement of system reliability Go Expertise: Strong, demonstrated, professional proficiency in Go (this is absolutely required) - Docker's primary language for backend systems AI/ML Knowledge: Practical experience with large language models (LLMs) and agent development System Architecture: Proven ability to design scalable, distributed systems Container Technology: Deep understanding of Docker, containerization best practices, and container orchestration RAG Systems: Experience building Retrieval-Augmented Generation systems (secondary focus) Rapid Iteration: Demonstrated ability to prototype quickly and iterate based on feedback AI Frameworks: Experience with CrewAI, AGNO, ADK, LangChain/LangGraph or similar AI orchestration frameworks (peferred) Python Proficiency: Experience with Python for AI prototyping and tooling (prefered) Experience with Kubernetes or container orchestration platforms (preferred) Open source contributions and community engagement (preferred) Experience with agent evaluation, reliability, and observability techniques (preferred) 8+ years of directly applicable experience Bachelor’s degree in Computer Science, Engineering, or a related field, or equivalent practical experience Integrate into our dynamic AI engineering team building containerized agent infrastructure Deep dive into cagent's architecture and our containerized agent deployment roadmap Contribute your first enhancements to cagent with the help of your team Understand our technical stack and begin collaborating with sister AI teams Lead significant features or improvements to cagent and our containerized agent platform Enhance agent deployment capabilities and container-based orchestration patterns Collaborate with the open-source community on cagent development Help other new team members onboard Regularly interact with internal stakeholders and analyze user feedback Drive major architectural decisions for our containerized agent platform that will impact millions of Docker users Continue to help grow the team and develop efficient agent development processes Contribute to evaluation frameworks and performance optimization across our agent systems Lead initiatives to expand containerized agent capabilities for enterprise use cases Grow your skills in enterprise-grade containerized AI system architecture and deployment Shape the future direction of cagent and Docker's agent ecosystem Docker does not offer visa sponsorship for this role. We use Covey as part of our hiring and / or promotional process for jobs in NYC and certain features may qualify it as an AEDT. As part of the evaluation process we provide Covey with job requirements and candidate submitted applications. We began using _ on April 13, 2024. Please see the independent bias audit report covering our use of Covey _. Perks Freedom & flexibility; fit your work around your life Designated quarterly Whaleness Days plus end of year Whaleness break Home office setup; we want you comfortable while you work 16 weeks of paid Parental leave Technology stipend equivalent to $100 net/month PTO plan that encourages you to take time to do the things you enjoy Training stipend for conferences, courses and classes Equity; we are a growing start-up and want all employees to have a share in the success of the company Docker Swag Medical benefits, retirement and holidays vary by country Remote-first culture, with offices in Seattle and Paris Docker embraces diversity and equal opportunity. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. The more inclusive we are, the better our company will be. #LI-REMOTE

Are you passionate about engineering? Do you want to make a difference? You could be one of our 54k+ colleagues in over 30 countries working on inspiring projects in the most innovative companies. Join us and start building tomorrow’s world today! Job Title: Model Based Systems Engineer Location: Manchester (Hybrid – 1 day/month on-site) Employment: Full-Time, Permanent Sectors: Aerospace / Defence ALTEN UK is seeking a Model Based Systems Engineer to support high-profile aerospace programmes within the combat air domain. This is an exciting opportunity to work at the forefront of next-generation air platform development, where your models will contribute directly to complex system design, performance optimisation and full digital twin representations. You’ll collaborate with experienced engineers across multiple disciplines and play a key role in shaping system behaviour at a platform level. Responsibilities: • Develop and manage functional, plant, control and requirement models to represent platform systems in a model-based systems engineering (MBSE) environment., • Contribute to the creation and evolution of a digital twin of the air platform, supporting validation, verification and system optimisation activities., • Analyse system-level and aircraft performance metrics using modelling tools and real-world data., • Collaborate with engineering teams to define interfaces between systems, ensuring effective integration across platform and sub-system levels., • Support strategic modelling efforts aimed at reducing test burden and enhancing simulation and trial planning. Essential Skills & Experience • Bachelor’s degree (or higher) in a relevant engineering discipline (e.g. Aerospace, Mechanical, Systems, Electrical)., • Minimum of 2 years' experience within systems engineering, ideally within aerospace or defence., • Working knowledge of SysML, Matlab/Simulink, or Cameo Systems Modeller., • Understanding of aircraft systems and their key performance characteristics., • Familiarity with MBSE principles, tools and practices., • Must be Security Clearable (UK national), with UKEO clearance preferred. Why join us? We foster a community of dually talented individuals who are both entrepreneurs and technology specialists. Our teams embody the spirit of innovation and entrepreneurship, enabling us to develop solutions most efficiently. Our commitment to sustainable growth is unwavering, and we continuously strive for accelerated transformation and continuous improvement. Through ALTEN labs, mentoring programs, internal universities, and more, we are always pushing boundaries and embracing new possibilities. We offer incredible opportunities to join inspiring projects in the most innovative companies. We prioritise your career development with personalised support plans tailored to your own aspirations. We're here to empower you and help you reach your full potential. Join our passionate team and start building tomorrow, today! In short you get: • A personalised career path and a rewarding management style, • A chance to work on the most exciting engineering projects and technologies along with Premium Customers, • A huge diversity of engineering projects and industries, • A competitive salary, • Private Medical Insurance, • Pension Scheme, • Cycle-to-work Scheme among many additional benefits, • Social atmosphere, regular gatherings, and team buildings, • Flexible way of working (role dependent)

Olo is a leading SaaS platform accelerating digital transformation in the restaurant industry, by helping customers deliver more personalised and profitable guest experiences. As a result, our digital ordering, payment, and guest engagement solutions enable brands to do more with less and make every guest feel like a regular. While our roots are in NYC, we’re intentionally investing in Belfast and Northern Ireland as a key hub, with an established leadership presence, a local team, and community for the long term. This role is fully remote, offering you flexibility to work from anywhere within NI. Your new role As a Fullstack Software Engineer on the Catering team at Olo, you will design, build, and monitor solutions that facilitate the online ordering, management, and effortless transmission of high-value Catering orders to our customers. Our team's mission is to create tools and features that support restaurant operations for the accurate production of catering orders and ensure our guests are served on time and without interruption. We aim to collaborate well. We encourage new ideas and experimentation. No part of the codebase is off-limits. You'll work with a passionate team dedicated to delivering amazing products using modern technologies. • Design and implement scalable, high-quality components and services that align with team and company goals., • Contribute to technical decision-making, including solution design and architecture, with a focus on addressing technical debt, reliability, and system performance., • Collaborate closely with product managers, designers, and stakeholders to translate customer needs into technical solutions., • Proactively monitor and improve system performance, identifying and resolving issues swiftly and effectively, while communicating clearly and effectively with stakeholders during incidents to ensure alignment and prompt resolution., • Take a proactive approach to support, digging into issues to identify root causes and developing long-term, proactive solutions to prevent recurrence., • Document and share knowledge effectively to elevate the team’s technical expertise., • Champion best practices in software development, agile methodologies, and continuous improvement., • 3+ years of experience in software engineering, including excellent knowledge of C#, .NET and commercial experience with Typescript and a Front-end framework (React or similar)., • Experience with cloud services like AWS and familiarity of containerization with Docker and EKS., • Experience writing unit tests and testable code., • Demonstrate strong problem-solving skills and the ability to navigate complex technical challenges., • Exhibit excellent judgment, seeking diverse perspectives and challenging assumptions to improve outcomes., • Deliver constructive feedback that empowers individuals and strengthens the team., • Communicate technical concepts clearly, adapting to both technical and non-technical audiences., • Consistently meets sprint and quarterly commitments while maintaining high standards of quality and efficiency.About Olo Olo is a leading restaurant technology provider with ordering, payment, and guest engagement solutions that help brands increase orders, streamline operations, and improve the guest experience. Each day, Olo processes millions of orders on its open SaaS platform, gathering the right data from each touchpoint into a single source—so restaurants can better understand and better serve every guest on every channel, every time. Over 800 restaurant brands trust Olo and its network of more than 400 integration partners to innovate on behalf of the restaurant community, accelerating technology’s positive impact and creating a world where every restaurant guest feels like a regular. Learn more at _. _We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Senior Cloud Engineer Location: Remote, UK Reports to: Head of Cloud & DevOps Work schedule: Mon-Fri, 37.5 hours per week Who are VitalHub? VitalHub aspire to accelerate the delivery of digital transformation at scale, supporting healthcare organisations internationally to improve how they capture and analyse data. This helps enhance patient flow and enables better coordination of care across planned and unplanned services, mental health, workforce, and compliance. From patient-facing apps and in-hospital flow management to national system control centres supporting the provision of healthcare services across US, UK, Canada, Middle East & Australia, our solutions exist to deliver an eco-system of joined-up technical infrastructure and centralised data integration. The Opportunity: The Senior Cloud Engineer will work in the Cloud department that is responsible for for the design, evolution, and operation of VitalHub’s UK cloud platforms and DevOps capabilities. The role will work on infrastructure, deployment pipelines, and operational tooling including designing, implementing, and improving them over time. The role will help ensuring systems are stable, secure, recoverable, and cost-effective across the full product lifecycle. The Cloud department works across all VitalHub’s UK products including working with colleagues around the world. Operating as a Cloud Centre of Excellence to ensure we achieve reliability, scalability, operability and affordability in hosting our products. As a senior the role will also involve mentoring and coaching to impart skills and best practices. Your Responsibilities: • Contribute to the design, evolution, and operation of cloud platforms and DevOps capabilities across the UK product portfolio, covering infrastructure, deployment pipelines, and operational tooling, • Contribute to the technical direction for cloud architecture, including environment structure, network topology, identity and access models, and shared platform services, in alignment with global cloud teams., • Support the development and promotion of standards and reference approaches for infrastructure as code, configuration management, and environment provisioning, ensuring repeatability and auditability., • Design, implement, and improve DevOps practices, including CI/CD pipelines, release and deployment strategies, environment promotion, and change management., • Ensure cloud platforms and CI/CD pipelines are secure and resilient, working with DevSecOps and InfoSec on access controls, secrets management, network security, and pipeline hardening., • Maintain robust foundations for stability and recovery, including disaster recovery strategy, RTO/RPO definitions, runbooks, and regular recovery testing., • Manage cloud cost through informed architectural decisions, capacity planning, scaling strategies, and service selection, using cost data to guide trade-offs rather than enforcing blanket controls. Promote transparency and visibility of cloud costs back into teams working on the products., • Mentor and coach other members of the team to improve their skills and promote best practices., • Work closely with engineering teams to ensure deployment, monitoring, and operational approaches align with application architecture and how systems are built and maintained., • Work collaboratively, explaining technical decisions clearly and bringing teams along through support, guidance, and shared ownership rather than enforcement. Essential Experience: • Experience with developing and maintaining Infrastructure-as-Code (terraform etc.) to a high standard, • Experience with deploying and maintaining workloads in cloud platforms (AWS, Azure), • Comfortable working directly with engineering teams in a collaborative approach, • Experience with DevOps tooling and processes (ci/cd pipelines, observability and reliability), • Networking knowledge Nice to Haves: • Comfortable in working in an environment with variety and sometimes being air dropped into new areas to help with projects/issues, • Experience with containerisation, • Experience with working in the hosting of SaaS applications, • Experience with running cloud at scale, • Able to coach and mentor others to impart skills and best practices, • Working on previous transformation projects (cloud migrations, workload modernisations, DevOps transformations) Our Interview Process: • Initial screening call with the Talent Team, • Virtual interview with the Line Manager – technical and verbal assessment, • Virtual interview with the VP of Engineering & Head of HR What do we offer? • Remote & flexible working, • 25 days holiday plus Bank Holidays, • Support to grow through professional learning & development courses!, • Employee Assistance Programme, • Inclusive approach to Diversity, Equity & Inclusion, • Events – networking and social, • PDP – progression & internal career opportunities, • Death in Service, • Regular training workshops As an equal opportunities’ employer, VitalHub is committed to the equal treatment of all current and prospective employees and does not condone discrimination based on age, disability, sex, sexual orientation, pregnancy and maternity, race or ethnicity, religion or belief, gender identity, or marriage and civil partnership. We aspire to have a diverse and inclusive workplace and strongly encourage suitably qualified applicants from a wide range of backgrounds to apply and join VitalHub. If you require any reasonable adjustments during the recruitment process, please let the Talent Team know.

At Wayve we're committed to creating a diverse, fair and respectful culture that is inclusive of everyone based on their unique skills and perspectives, and regardless of sex, race, religion or belief, ethnic or national origin, disability, age, citizenship, marital, domestic or civil partnership status, sexual orientation, gender identity, veteran status, pregnancy or related condition (including breastfeeding) or any other basis as protected by applicable law. Founded in 2017, Wayve is the leading developer of Embodied AI technology. Our advanced AI software and foundation models enable vehicles to perceive, understand, and navigate any complex environment, enhancing the usability and safety of automated driving systems. Our vision is to create autonomy that propels the world forward. Our intelligent, mapless, and hardware-agnostic AI products are designed for automakers, accelerating the transition from assisted to automated driving. In our fast-paced environment big problems ignite us—we embrace uncertainty, leaning into complex challenges to unlock groundbreaking solutions. We aim high and stay humble in our pursuit of excellence, constantly learning and evolving as we pave the way for a smarter, safer future. At Wayve, your contributions matter. We value diversity, embrace new perspectives, and foster an inclusive work environment; we back each other to deliver impact. Make Wayve the experience that defines your career! Key Responsibilities: In collaboration with the other safety expert(s): • Lead the functional safety activities for Wayve’s ADS, and its integration into present and future vehicle platforms, or the integration of third party safety-critical systems. This involves:, • Working with various internal and external teams to gain a deep understanding of the system under development to build the Item Definition work product for each platform., • Conduct risk assessments (HARAs, FMEAs, FTAs) to identify the risks and build a safety concept to mitigate the risks to an acceptable level., • Work with internal design teams to build a system architecture that meets the safety concept including decisions on decompositions, deriving relevant SW and external requirements., • Support internal SW teams in implementing the safety requirements on target HW., • Define test specifications at various levels of integration to verify and finally validate the safety concept., • Define the Safety case by building a structured claims, arguments and evidence based paradigm., • Contribute to developing the safety work products for production projects with similar activities as defined above., • Work with the process and compliance teams to update the safety processes for certification activities. In order to set you up for success as a Functional Safety Engineer at Wayve, we’re looking for the following skills and experience. Essential: • Very good understanding of the functional safety development process as per ISO 26262 with a minimum 5 years of experience in applying the standard on different automotive systems; in particular parts 3, 4, 5, 6, 8 and 9., • Experience in conducting vehicle level testing activities at proving grounds to verify and validate the safety concept. Desirable: • Expertise in ISO 26262-6; the candidate must have practical experience in developing or leading the development of ISO 26262 compliant production software and in the qualification of software tools., • Experience in managing suppliers of safety related hardware or software elements (DIA design, supplier audit and assessment, project management))., • Knowledge and experience in developing the safety case of an AD systems, in particular:, • Experience in developing the safety concept for a computer vision based system, • Sufficient knowledge of neural networks (architectures, algorithms, training and testing pipeline) to understand the challenges associated with the safety assurance of such systems and discuss options and rationales with our scientists, • Experience in SOTIF, especially in identifying SOTIF triggering conditions through analysis and defining testing and validation strategies to assess SOTIF performance., • Operational safety experience, such as identifying the operational risks and designing training and operational procedures to ensure the safety of testing on public roads, is a plus. About Yourself: • You are truly passionate about Safety and making the world a safer place your mission; this is reflected in the way you choose terms appropriate to your audience, present the essence of system safety and formulate the key takeaway messages., • You are pragmatic, you understand the need to balance risk versus benefits, even more so in a startup environment., • You are comfortable in debating with other stakeholders safety-related trade-offs, at any level of the development process and at any level of the organisation., • You are self-starter, autonomous in thoughts but collective in action., • You are able to think and work at various abstraction levels; thinking “blue sky” and paving the way for long term safety goals, or diving deep into technical details to provide clear guidance and solutions on the safety activities for the development of a subsystem (e.g. controller) or launching an application (robotaxi), • You are confident in challenging others’ ideas and views, but equally, are open to constructive criticism and able to reconsider your opinions or beliefs. This is a full-time role based in our office in London. At Wayve we want the best of all worlds so we operate a hybrid working policy that combines time together in our offices and workshops to fuel innovation, culture, relationships and learning, and time spent working from home. We operate core working hours so you can determine the schedule that works best for you and your team. #LI-KM1 We understand that everyone has a unique set of skills and experiences and that not everyone will meet all of the requirements listed above. If you’re passionate about self-driving cars and think you have what it takes to make a positive impact on the world, we encourage you to apply. For more information visit _ To learn more about what drives us, visit _ DISCLAIMER: We will not ask about marriage or pregnancy, care responsibilities or disabilities in any of our job adverts or interviews. However, we do look to capture information about care responsibilities, and disabilities among other diversity information as part of an optional DEI Monitoring form to help us identify areas of improvement in our hiring process and ensure that the process is inclusive and non-discriminatory.

About Us _ is not your regular deep-tech startup. We are creating the next-generation AI platform to support anyone who wants to help advancing humanity and improve the world around us. In just four years, we have raised a total of $120 million and have built a world-class team of 220+ employees (including 49+ PhDs with more than 40,000 citations), both remotely from 17 different countries and with offices in Belgium, France, Switzerland, Italy, the UK, headquartered at the High Tech Campus in Eindhoven, Netherlands. We have also launched our Metis™ AI Platform, which achieves a 3-5x increase in efficiency and performance, and have visibility into a strong business pipeline exceeding $100 million. Our unwavering commitment to innovation has firmly established us as a global industry pioneer. Are you up for the challenge? Position Overview As a Logical Design Engineer, you will join a team responsible for the micro-architecture, implementation and execution of in-house designed AI products. Your role will be critical in achieving the highest level of quality and performance as well as ensuring continued innovation in both design and design flow. This is an opportunity to work with cutting-edge technology and a dedicated team of professionals who share your passion for pushing the boundaries of what's possible. Key responsibilities: Collaborate with cross-functional teams to clarify and comprehend intricate design specifications and requirements. Architect and implement advanced micro-architectures from high-level specifications for silicon components, adhering to performance, power, and area (PPA) metrics. Employ industry-standard design tools and methodologies to fashion and optimize digital logic circuits. Conduct block and system-level RTL coding, ensuring optimal performance, power, and area (PPA) metrics. Integrate various IPs/Sub IPs into the top-level SoC. Perform static checks (lint, cdc, equivalence checks) to enhance the quality of the RTL. Automate tasks using scripting for efficiency gains. Undertake comprehensive functional verification and collaborate closely with verification engineers to ensure the correctness of the design. Actively engage in design reviews, contributing technical expertise to enhance overall design quality. Work collaboratively with physical design engineers to address design-for-manufacturability (DFM) and design-for-test (DFT) considerations. Qualifications / skills Education: A degree in electronics engineering, electrical engineering or computer science or other relevant discipline. Experience: A minimum of 5 years of experience and proven expertise in silicon logical design, with a successful track record in RTL coding and synthesis, digital design, SoC, and integration of 3rd-party IPs (PCIe, LPDDR), with fluency in Verilog. Expertise: Mastery of industry-standard Electronic Design Automation (EDA) tools for design and verification. Deep understanding of intricate digital design principles, covering clock domain crossing, low-power design, and timing closure. Scripting: Proficiency in scripting languages such as Python, shell or Tcl for automation. Collaboration / Team Player: Demonstrated ability to work closely with architecture, verification, physical design and software teams to ensure comprehensive verification coverage. Problem Solving: Strong analytical and problem-solving skills. Communication: Excellent written and verbal communication skills in English. Comfortable working with a team spread across 15 countries. Location We offer a flexible working arrangement, with options to: Work from one of our Axelera AI offices (Leuven in Belgium, Amsterdam and Eindhoven in the Netherlands, Zurich in Switzerland, Florence and Milan in Italy or Bristol in the United Kingdom) if you're already based in the vicinity. Work fully remotely from any European country (incl. the UK) you are already in. Relocate with us and work from Italy (Florence or Milan) or the Netherlands (Amsterdam or Eindhoven). What we offer This is your chance to shape and be part of a dynamic, fast-growing, international organization. We offer an attractive compensation package, including a pension plan, extensive employee insurances and the option to get company shares. An open culture that supports creativity and continual innovation is awaiting you. Collaborative ownership and freedom with responsibility is characteristic for the way we act and work as a team. At Axelera AI, we wholeheartedly embrace equal opportunity and hold diversity in the highest regard. Our steadfast commitment is to cultivate a warm and inclusive environment that empowers and celebrates every member of our team. We welcome applicants from all backgrounds to join us in shaping the future of AI.

Attio is the CRM built for the AI era. Designed for the most ambitious go-to-market teams, it gives companies the power to understand every customer, automate at scale, and build their go-to-market motion exactly as they need. We've raised $116M from some of the world's best investors: GV (Google Ventures), Redpoint, Balderton, Point Nine, and 01A. We hire builders who thrive on complex technical challenges, hold themselves to a high bar, and genuinely care about delighting the people who use what they build. The team here brings sharp judgement, real craft, and the drive to do exceptional work. We're obsessed about the details and energized by the frontier. If you want to do the best work of your career, this is the right place. We are seeking highly skilled and experienced Platform Product Engineers to join our Security, Infrastructure and Performance team. This is a crucial, dual-faceted role that combines high-level engineering strategy with hands-on operational excellence. The successful candidates will be responsible for building, operating, and continuously enhancing the internal technology platform, fundamentally treating this platform as a product with all development teams as its primary customers. The Platform Product Engineer role is centered around embodying and executing DevOps principles, specifically focusing on: Automation: Systematically removing manual toil from the software development lifecycle (SDLC) through the creation of robust tooling, CI/CD pipelines, and infrastructure-as-code (IaC). Collaboration: Fostering a tight, cooperative partnership with product development teams, gathering requirements, and delivering solutions that accelerate their productivity and time-to-market. Continuous Improvement: Instilling a culture of iterative enhancement for the platform's reliability, cost-efficiency, and developer experience. This mandate is underpinned by a rigorous Site Reliability Engineering (SRE) mindset. The successful candidates will be instrumental in defining and upholding Service Level Objectives (SLOs) and Service Level Indicators (SLIs), implementing effective monitoring and alerting strategies, and leading operational incident response processes. The core responsibility is to implement, maintain, and continuously improve the foundational platform infrastructure that powers all engineering services. This necessitates a relentless focus on ensuring high reliability, exceptional scalability, and optimal performance across the entire stack. Platform Infrastructure: Build and maintain platform infrastructure using declarative IaC tools (e.g., Terraform, Pulumi), ensuring all environments are reproducible, version-controlled, and auditable. Proactively manage the capacity of the infrastructure to consistently meet or exceed Service Level Objectives for latency, error rates, and availability. Incident Response and Post-Mortems: Act as first-line responders for critical system incidents. Triage, diagnose, and resolve complex production issues rapidly. Drive a culture of blameless post-mortems, ensuring root causes are identified, and long-term preventative measures are implemented as code (e.g., via runbooks, automation, or system design changes). Tooling & Automation: Own the stack of supporting tools necessary for operational excellence and developer enablement, including: Continuous Integration and Continuous Delivery (CI/CD) Pipelines: Implement, maintain, and evolve the fully automated CI and CD pipelines. This includes establishing best practices for fast, reliable, and secure build, test, and deployment processes. Observability: Implement and manage robust systems for monitoring (metrics), logging (centralised log aggregation), and distributed tracing to provide deep insights into application and infrastructure health. Applied DevOps and SRE Principles: Must have : Demonstrable, hands-on experience applying core DevOps and Site Reliability Engineering (SRE) principles to manage, monitor, and scale production systems. Must have: A deep understanding of the SRE mindset, including SLO/SLA creation and monitoring, error budget management, toil reduction, and post-incident review (blameless postmortems). Desirable: Proven ability to drive cultural and process change that fosters a collaborative approach between development and operations teams. Cloud Infrastructure and Containerisation Expertise: Must have: Expertise in one or more major public cloud providers (AWS, GCP, or Azure), encompassing network configuration, security best practices (IAM, security groups, etc.), compute services (EC2, GKE, ECS, etc.), and managed services (databases, queues, serverless functions). Must have: In-depth knowledge of container technologies, specifically Docker, and extensive experience orchestrating them at scale using Kubernetes (K8s). This includes designing, deploying, and managing Kubernetes clusters, understanding networking (CNI), storage (CSI), and security configurations within the Kubernetes ecosystem. Automation and Programming Skills: Must have: Proficiency in one or more modern software languages (e.g., Typescript, Go, Python, Rust) and associated frameworks used for building high-performance, resilient production systems. Must have: Proven experience developing robust, maintainable, and well-tested automation scripts, services and pipelines to manage infrastructure, deployments, and operational tasks. Operational Tooling and Observability Management: Must have: Experience owning, managing, and maintaining mission-critical operational tooling. Desirable: Proven background in implementing and managing centralised logging solutions or similar platforms (e.g., Splunk, DataDog). Desirable: Familiarity with distributed tracing tools (e.g., Jaeger, Zipkin) and Application Performance Monitoring (APM) solutions. Competitive salary of £95,000 to £125,000 Equity in an early-stage tech company on an incredible trajectory 25 days holiday plus local public holidays Apple hardware Private medical insurance through AXA Pension contribution through Hargreaves Lansdown Enhanced family leave Team off-site in fun places! (We've been to Barcelona, Lisbon, Malta, and Split so far)

Job Title: Data Engineer Location: UK Job Type: Full-time Scrumconnect is a leading force in technology consultancy, proudly contributing to over 20% of the UK’s most significant citizen-facing public services. Our award-winning team has made a substantial impact, delivering more than 64 services in the past two years alone. This work has not only reached over 50 million citizens but also achieved considerable savings for the taxpayer, amounting to over £25 million. At Scrumconnect, we foster a community of talented consultants who thrive on collaboration, sharing knowledge, and continuous learning to address and solve complex challenges. Our mission is to combine advanced software engineering, human-focused design, and data-driven insights to deliver unparalleled service to our clients. We are looking to fill the position of Data Engineer to help develop and maintain data products. Data Engineering teams are responsible for the delivery and operational stability of the data products built and provide ongoing support for those products. Data Engineers work within, and contribute to, the overall data development lifecycle process as part of multi-functional Agile delivery teams focused on one or more products. Role: Design, build, and operate simple, repeatable ETL data pipelines within distributed processing environments and cloud platforms, as well as localized single-node processing environments. Develop and produce prototyped then productionized code that can be deployed across a range of ETL, data validation, and other data production processes. Develop understanding of the native tooling of one or more of: GCP, Azure, AWS. An intermediate or better level coding in one or more mainstream coding languages (i.e., Python, SQL, Java, Scala, and R), and critically review the code of other data engineers. Develop code for a range of data products including data matching, rule development, scans, operational outputs. Participate in development and maintenance of in-house code libraries. Undertake unit testing to support common code development. Review business requirements to ensure they are clear and robust, and transform requirements into reusable production-ready code and/or effective data models. Understand the key principles of database design and be able to resolve technical problems in databases, data processes, data products, and services as they occur. Initiate actions, monitor services, and identify trends to resolve problems. Apply correct techniques in normalizing data and building robust relational structures in database products. Undertake basic data analysis, for example, for data profiling, QA, or problem resolution. Support queries from end users on data quality issues affecting data production; communicate issues and blockers to develop solutions. Undertake source system analysis and data profiling to confirm data quality and ensure accurate metadata. Understand relevant data sources, tools, and systems. Work with experts to develop validation frameworks for both simple and complex data sources. Communicate with customers, for example, to update on progress or confirm requirements. Using a working knowledge of cloud data engineering tools in assisting with the development of data pipelines, products, and automation processes. Work with other team members in development of tool performance logging and monitoring. Work with other team members in applying engineering team and community best practice in data products and pipelines. Experience predicting and advising on technology changes in the engineering toolset(s) and platform(s) you work on. Work with the team in implementing the transition to modern data platforms including Data Warehouse, Lakehouse, across the data products, pipelines, and processes you are responsible for. Engage with other professional communities (Data Science, Architecture, etc.) to identify emerging and cross-community issues affecting your role and escalate as necessary. Describe technical, data, pipeline, and production issues to colleagues of different specialisms. Communicate within the team and across teams to monitor expectations around delivery of data engineering, products, and pipelines, blockers, priorities, and issues. Escalate issues and blockers in delivery proactively. Familiar with developing data pipelines and products for very large volume 'big data' series using a range of native engineering tools and practices and coding approaches. A working knowledge of engineering standards across a platform and native toolset. Experience implementing these standards in the day-to-day role and keeping outputs up-to-date with these. Typical Data Engineering Experience required (5+ yrs): Knowledge and experience of Azure/AWS Cloud data solution provision. Proficient in SQL. Ability to develop and deliver complex visualisation, reporting and dashboard solutions using tools like Power BI. Enterprise-scale experience with ETL tools (Informatica and or similar). Experience of data modelling and transforming raw data into datasets and extracts. Experience of working in a large project /scale complex organisation and knowledge of migrating legacy capabilities. Experience in Agile. Ability to analyse and collect information and evidence, identify problems and opportunities, and ensure recommendations fit with strategic business objectives. Experience of building team capability through role modelling, mentoring, and coaching. Ability to manage relationships with non-technical colleagues and can work in a collaborative, inclusive way. Ability to design, write, and operate ETL pipelines, in the context of distributed processing, applying coding, data, and documentation standards, in the language required by the business area. Understanding of the principles of data processing in a distributed and or cloud platform, and ability to use this understanding to ensure robust coding in a distributed or cloud environment. Able to write clean, efficient and well documented code for data processing tasks to a specification. Able to use Git for code version control to pull and push and review merge requests for team and own code. Ability to undertake simple data and code analysis for effective quality assurance and to resolve processing issues. Ability to undertake simple data and code analysis for effective quality assurance and to resolve processing issues. Experience of one or more programming/coding languages listed: Python/PySpark, SQL, Proc SQL, NoSQL, MySQL, SQLite, Spark SQL, Hive SQL, PostgreSQL, SAS, SAS E-guide, Scala, RegEx, Java, R Investigate problems in systems, processes and services, with an understanding of the level of a problem, for example, strategic, tactical or operational. Undertake data profiling and source system analysis for data evaluation, issue resolution or data standardisation. Use metadata repositories to complete complex tasks such as data and systems integration impact analysis. Good knowledge of database structures, practices, principles of database integrity etc. Basic knowledge of applying database principles and SQL coding across a range of platform database and data querying tools (i.e. SQL Server, Cloud SQL, Big Query, Hive, Athena etc.) Show an awareness of opportunities for innovation with new tools and uses of data. Experience in more than one of the following tools is required for Engineers engaging in BI development: Plotly, R Shiny, Tableau, QlikView/Qlik sense, Power BI, SAP, Business Objects, MicroStrategy Experience of several of the following tools: NiFi, Hbase, Bash, Assist, Putty, Neo4J, Spark , Kafka, HDFS, Oozie, Git Hub, Unix, Hadoop, Impala, DoJo, Flume, Elastic, Logstash, Kibana, Airflow, Glue, Big Query, Athena, CML, Hive, Informatica, CuteFTP Ability to explain and communicate technical concepts in non-technical language. Explain the types of communication that can be used with internal and external stakeholders, and their impact. Design, build and test data products based on feeds from multiple systems, using a range of different storage technologies, access methods or both. Able to explain and implement the concepts and principles of data modelling. Ability to create and run simple unit tests. Desired Qualifications Certifications in AWS, Azure, Databricks, or related technologies. Example _ Experience with public sector data initiatives and compliance requirements. Knowledge of machine learning and artificial intelligence concepts. Your working time at Scrumconnect will be split between multiple locations, including from our HQ and hub locations, client site or home. Travel requirements vary in frequency and take into account requirements of your work, our clients and the team. We welcome candidates from all identities, attributes and backgrounds to thrive with us. The diversity of our people should be reflected in the impact we deliver. Join us at Scrumconnect, where your highly demonstrable skills and expertise will drive the future of user-centred design in public services.

Who we are: We are a leader in fraud prevention and AML compliance. Our platform uses device intelligence, behavior biometrics, machine learning, and AI to stop fraud before it happens. Today, over 300 banks, retailers, and fintechs worldwide use Sardine to stop identity fraud, payment fraud, account takeovers, and social engineering scams. We have raised $145M from world-class investors, including Andreessen Horowitz, Activant, Visa, Experian, FIS, and Google Ventures. Our culture: We have hubs in the Bay Area, NYC, Austin, and Toronto. However, we maintain a remote-first work culture. #WorkFromAnywhere We hire talented, self-motivated individuals with extreme ownership and high growth orientation. We value performance and not hours worked. We believe you shouldn't have to miss your family dinner, your kid's school play, friends get-together, or doctor's appointments for the sake of adhering to an arbitrary work schedule. Location: Remote; based in UK or EU About the role We’re looking for an Integration Engineer to lead client onboarding for Sardine’s fraud and compliance products. You’ll manage end-to-end integrations, translate technical requirements into solutions, and ensure a smooth, successful deployment. This is a hands-on role working closely with clients and internal teams, perfect for someone who thrives in fast-paced environments and enjoys solving complex problems with practical, scalable solutions. What you’ll be doing Lead implementation and integration efforts for fraud and compliance products Work closely with clients and provide end-to-end support during their onboarding process, setting our clients up for success Own public-facing SDKs, APIs, integration guides, and support documents Analyze clients' requirements from the technical and functional perspectives and design solutions by having a deep understanding of our system and products' capabilities Manage implementation projects, including monitoring project quality, managing timelines, mitigating risk, and driving deliverables Build a deep understanding of customers' business problems, technical requirements, and success criteria so that you can provide solutions utilizing Sardine's technology Provide product feedback to internal stakeholders as the eyes and ears on the ground What you’ll need 3+ years of hands-on experience as an implementation manager, integrations engineer, technical account manager, solution architect, and systems analyst, working with multiple technical teams, both internal and external 1+ years of B2B SaaS experience, preferably working in the relevant domain (payment, fraud, risk, or compliance) Excellent written and verbal communication skills, including the ability to communicate complex technical and business concepts to technical and non-technical personas Excellent organizational skills and the ability to manage multiple projects simultaneously and drive deliverables to completion Experience with basic SQL querying and JSON payload analysis Experience with APIs specs like OpenAPI, web development, and writing scripts to build internal tools (e.g., bash scripting, Python, SQL, Ruby, Golang, Postman) Compensation: Base pay range of 35,000 - 45,000 GBP in UK; 40,000 - 50,000 Euro in EU + Series C equity with tremendous upside potential + Attractive benefits The compensation offered for this role will depend on various factors, including the candidate's location, qualifications, work history, and interview performance, and may differ from the stated range. Benefits we offer: Generous compensation in cash and equity Early exercise for all options, including pre-vested Work from anywhere: Remote-first Culture Flexible paid time off, Year-end break, Self care days off Health insurance, dental, and vision coverage for employees and dependents - US and Canada specific 4% matching in 401k / RRSP - US and Canada specific MacBook Pro delivered to your door One-time stipend to set up a home office — desk, chair, screen, etc. Monthly meal stipend Monthly social meet-up stipend Annual health and wellness stipend Annual Learning stipend Unlimited access to an expert financial advisory Join a fast-growing company with world-class professionals from around the world. If you are seeking a meaningful career, you found the right place, and we would love to hear from you. To learn more about how we process your personal information and your rights in regards to your personal information as an applicant and Sardine employee, please visit our _.

The salary for this role is £50,000 - £52,000 This role is advertised on a 12 month fixed term contract. Do you have hands-on experience supporting and optimising Azure integration platforms, including CI/CD pipelines and live production environments? Are you confident designing, managing, and securing Azure AD B2C identity flows and API Management (APIM)? Can you develop, maintain, and troubleshoot cloud solutions using multiple technologies and languages—such as C#, Azure Functions, and Web Apps—while embedding security and quality into your code? If so, we’d love to hear from you! At Livestock Information Ltd, our mission is to be an outstanding service provider of livestock data, empowering government, industry, and farmers to effectively manage disease and infection control, whilst enhancing productivity and innovation in agriculture. To achieve this, we need great people, who share in our values. As an Azure Integration Engineer, you’ll play a key role in keeping our platforms running smoothly and securely. Your day will involve monitoring systems, fixing issues as they arise, and working closely with development teams to improve CI/CD pipelines and delivery processes. You’ll also look after Azure B2C identity flows and API Management (APIM), helping ensure seamless and secure integrations. Alongside this, you’ll support security activities using tools like Defender for Cloud, SonarCloud, and ZAP, respond to support requests, and help prepare for upcoming releases and projects. Your responsibilities will include • Providing timely and efficient break-fix support to resolve system issues and minimise downtime in line with Service Level Agreements including out-of-hours., • Monitoring system performance, availability, and capacity, performing infrastructure and code optimisation to ensure efficiency and reliability., • Providing 3rd line support for the Azure customer identity and integration services and address escalated issues while coordinating with internal teams to maintain service uptime., • Implementing real-time monitoring tools for applications and under lying infrastructure., • Setting up proactive alerts and developing incident response procedures to identify, respond to, and resolve incidents efficiently., • Monitoring system health and providing timely feedback on performance and potential risks to service availability., • Conducting regular vulnerability assessments, enforce security policies, and ensure patching and system hardening measures are applied., • Adhering to corporate Information Security Policies, Azure Security Benchmark, and CIS controls., • Supporting development teams with technical guidance, ensuring robust and secure applications or services., • Collaborating on new projects and enhancements to ensure customer identity and integration requirements are met.. You may be required to undertake other duties assigned by your line manager as appropriate We are looking for someone with the following • Experience in providing high-quality break-fix support in a fast-paced environment., • Proven ability to monitor and maintain complex cloud-based systems, ensuring uptime and performance., • Experience of managing Azure subscriptions and Azure resources efficiently., • Expertise in managing customer identity using Azure AD B2C., • Experience in creating and configuring applications in Azure., • OpenID, OAuth2.0 & SAML2.0: Knowledge of identity and access protocols., • Experience in creating and customizing user flows in Azure AD B2C., • Strong understanding of user management and custom attributes in Azure AD B2C., • UX/UI Customization in AD B2C User Flows: Ability to customize user experience flows., • Knowledge of claims providers and technical profiles in B2C., • Ability to create complex and customized user flows based on requirements., • Hands-on experience with Microsoft Graph API and MSAL for managing identities., • Understanding of SSL certificates and security best practices., • Experience in implementing custom policies using the Identity Experience Framework in Azure AD B2C., • Experience with APIM, including security and cloud-to-cloud integration., • Hands-on experience in developing Azure Functions, Web Apps, and C# programming., • Experience in user administration, group assignment, and role management in the Azure AD B2C portal., • Proficiency in using Azure Blob storage, Application Insights, and monitoring tools., • Expertise in building and automating CI/CD pipelines for efficient software delivery from development to production in Azure DevOps., • Hands-on experience maintaining and deploying SonarCloud and Zed Attack Proxy (ZAP) in a CI/CD pipeline for code quality and security scanning. This role will report to the Azure Engineering Manager and will sit within our Service department. As an LI employee, you will be entitled to our company benefits which include • A fully remote and flexible working set up, • 25 days annual leave, increasing by 1 day each year of service up to maximum of 30 days (plus Bank Holidays), • 1 Privilege Day, • 4 x annual salary Life Assurance, • Market leading pension scheme through Legal & General, • Enhanced Family Friendly Policies, • Excellent learning, training, and career development opportunities, • 24/7 access to our Employee Assistance Programme, • A diverse and inclusive culture where everyone is respected and valued To apply for this role, you will need to submit a CV and answer some pre-screening questions. The interview and assessment process for this role will involve a telephone interview with our Talent Team, followed by a first stage and a final stage interview. Interviews will be conducted either remotely via MS Teams or face to face. If we need to make a reasonable adjustment so that you can complete your application, please contact us as soon as possible by emailing _ before the closing date to discuss your needs. Please note that we may close the advert early if we receive a high volume of applications Artificial intelligence tools can be used to help you prepare your application. However, all statements and examples provided during the recruitment process should be accurate and based on your own knowledge and experience. Applications may be withdrawn if content is found to be plagiarised, including where ideas or experiences generated by artificial intelligence are presented as personal work. For further information, please click on the following link : We approach our work with TACT; we are Transparent, Accountable, Committed and we work as a Team. We are transparent together, embracing honesty and building trust. We are accountable to the industry and strive for the best possible solutions for the communities we serve. We drive change with passion, commitment and enthusiasm to deliver a great service to the livestock industry. We work kindly and cohesively which allows us to support each other in our personal and strategic goals. For more information on our values and what its like to work at Livestock Information, please visit our Careers Page : _ At Livestock Information Ltd, we have a zero-tolerance approach to harassment, abuse, discrimination, or bullying during our recruitment process. Any such behaviour may result in a candidate being withdrawn from consideration We are committed to upholding our company values and ensuring a safe and respectful experience for all candidates and staff. We’re a fully remote organisation however, our roles are UK-based and can only be performed within the UK. We come together in person twice a year for our All Hands events to connect, collaborate, and strengthen relationships. From time to time, there may also be occasional in-person team meetings. At Livestock Information, we value diversity and believe that every individual brings different strengths. We understand that not everyone may possess every single skill outlined in this job description, but if you believe you have a solid skill set that enables you to excel in this position then we really encourage you to apply. If you feel your application has not been treated in a fair and open manner or if you are dis-satisfied with any of your interactions during the recruitment process and you wish to make a complaint, you should contact our Talent team via email: talent@livestockinformation.org.uk Livestock Information Ltd. cannot sponsor work visas at this time. Livestock Information Ltd. Does not discriminate based on race, sex, colour, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits. Livestock Information Ltd. Does not accept unsolicited CVs from any source other than directly from a candidate. Any unsolicited CV’s not originating directly from a candidate and sent to Livestock Information Ltd or any Livestock Information Ltd employees, including unsolicited CVs sent to a Livestock Information Ltd mailing address or email address, are rejected. Livestock Information Ltd will NOT pay a fee for any placement resulting from the receipt of an unsolicited CV. Livestock Information Ltd considers any candidate for whom the recruiter has submitted an unsolicited CV referred by the company free of any fees.

Manufacturing Engineer (Assembly / Electro-Mechanical Integration). Youll be hands-on in a highly regulated, low-volume manufacturing environment, translating engineering designs into. Supporting electro-mechanical and electronic sub-assembly through to full system builds.

World Class Defence Organisation is currently looking to recruit an Electrical Systems Engineer / Architect subcontractor on an initial 12 month contract. Your base site can either be from the companies Bristol, Stevenage or Bolton office. This role will be a hybrid position 3 days per week onsite and 2 days remote. Hourly Rate: £60 - £85 (Umbrella). Contract Duration: 6 Months initially and then ongoing and long-term thereafter. Missile Electronic Architect Job Description: Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. Its an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: Specifying/determining system electrical requirements interface definitions and characteristics between subsystems/equipment power architecture, including power budget and power profiles data communication and processingarchitecture requirements for EMC, bonding, grounding and screening signal safety, including routing of safety related signals Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration Reviewing and authoring reports, guidelines and processes Design assessments and analysis Working to defence/industry standards Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: Project manage the equipment(s) on behalf of the project during development, qualification and manufacture Own the requirements on behalf of the project for the equipment(s) Produce Statement(s) of Work for the associated design authority for the equipment(s) Create and update plans showing activities for the equipment(s) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance Hold regular progress reviews with the design authority for the equipment(s) Review qualification verification evidence Track and find resolution to equipment non-compliances Attend and support design reviews Skillset/experience required: Technical experience required: electrical/electronics interface definitions knowledge of defence/industry standards, etc. degree level qualification in a related subject systems engineering writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: defence weapon systems power supplies actuators data communication sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering (MBE) TPBN1_UKTJ

Morson are working with a leading defence manufacturer who are looking for a Manufacturing Engineer with experience in Assembly and Integration to eork out of the site near Bolton. Responsibilities: As a Manufacturing Engineer within the unit and missile assembly manufacturing facility, you will ensure our products are manufactured efficiently and within budget. Play a vital role as a member of the Manufacturing Engineering team, supporting multi-project manufacturing activities. Compile and update Manufacturing Instructions accurately. Design, commission, and validate associated tooling. Support the industrial validation process through the application of FMEAs, FAIs, and related methodologies. Resolve technical issues arising during the manufacturing process promptly. Implement route card changes resulting from rework activities. Manage Configuration Control by incorporating Design Modifications into Manufacturing Instructions. Provide support for the Non-Conformance Process using SAP. Required Skills and Experience: A minimum of five years' experience within an engineering discipline. Proven ability to interpret Design Drawings to produce clear Manufacturing Build Instructions for both skilled and semi-skilled operators. Experience in electronic sub-assembly manufacture through to system-level builds. Knowledge of assembly processes for small and miniature electro-mechanical actuation systems. Ability to work collaboratively within a team environment. Strong understanding of customer requirements with a commitment to meet and exceed expectations. Familiarity with and adherence to company processes and procedures. Excellent communication skills, capable of engaging effectively across all organisational levels. Education: • Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) AND Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.) AND Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved OR Degree in a relevant Engineering subject. If the role is of interest to you please reply with an up to date CV and have ready photos of your certifications. TPBN1_UKTJ

Senior DevOps Engineer Pay up to £80,664 plus 28.97% employer pension contributions, hybrid working, flexible hours, and great work life balance. This is a real and significant DevOps leadership role in the UK's largest government department. Here you will have the freedom and autonomy to drive the development of our technical landscape and define what DevOps looks like in DWP DWP. Digital with Purpose. You'll be a leading, expert voice in a DWP Digital community that is driving a once-in-a-generation transformation of public services. We have a unique purpose, putting better, more efficient services in the hands of DWP users. The scale of our engineering challenge is also huge: • We have 1bn lines of code in over 12,000 code repos and 90+ programming languages., • We run around 294 days' worth of testing every day through automation., • Our APIs receive 173 million requests, and we spin up 280,000 AWS servers every month., • Over 22 million people - 1/3 of the UK's adult population access our services daily., • Over 100,000 colleagues and agents use the kit, tools and systems we roll out. We build and maintain systems behind payments worth over £195bn payments annually. What skills, knowledge and experience will you need? • Experience working with and deploying applications on the Pega platform through a variety of technical deployment and integration technologies., • Significant demonstrable experience of developing and supporting AWS cloud-based applications., • Strong working knowledge of writing and maintaining Infrastructure, and Configuration as Code., • Extensive experience of using Unix/Linux/Windows in a support and/or development environment including scripting languages., • Demonstrable experience of working in a DevOps environment - Continuous Integration & Deployment, Delivery methods and techniques, including agile scrum experience., • Strong working knowledge and practical experience of implementing and maintaining CI/CD pipelines., • Proven ability and experience of supporting, guiding, and developing Engineers across multidisciplinary teams in an agile environment. You and your role We're looking for a Senior Pega DevOps Engineer who's passionate about automation and building modern CI/CD pipelines using the latest tools In this role, you'll take real ownership of technical delivery within your team, with the freedom and influence to shape how things are done. You'll design and implement solutions in AWS that are scalable, resilient, and easy to maintain, supporting critical systems used to detect and reduce fraud and error across the benefits system. You'll also play a key role in promoting engineering ownership across teams, helping to embed best practices and ensure the services we run are reliable and well looked after. Working closely with product teams, you'll gather requirements, evaluate tools, and deliver practical solutions, while also getting stuck into provisioning environments and resolving live issues when they arise. A big part of your work will involve Pega based case management systems, so we're looking for someone with strong experience in that space who can help ensure workflows are robust, reliable, and fit for purpose. Details. Wages. Perks. Location: You'll join us in one of our brilliant digital hubs in Birmingham, Blackpool, Leeds, Manchester, Newcastle or Sheffield, whichever is most convenient for you. Hybrid Working: We work a hybrid model - you'll spend some time working at home and some time collaborating face to face in a hub. Pay: We offer competitive pay of up to £80,664. Pension: You'll get a brilliant civil service pension with employer contributions worth 28.97%, worth over £16,000 per year. Holidays: A generous leave package starting at 26 days rising to 31 days over time. You can also take up to 3 extra days off a month on flexi-time. You'll also get all the usual public holidays. We have a broad benefits package built around your work-life balance which includes: • Flexible working including flexible hours and flex-friendly policies, • Time off volunteering and charitable giving, • Bring your authentic self to work with 'I Can Be Me in DWP', • Discounts and savings on shopping, fun days out and more, • Interest-free loans to buy a bike or a season ticket, so it's even easier for you to get to work and start making a difference, • Professional development, coaching, mentoring and career progression opportunities. And we have an award-winning environment and culture: • DWP have been recognised as 2024 Diversity Employer of the Year at the Computing Women in Tech Excellence awards, • Diverse and Inclusive Leadership at Digital Leaders Awards 2024, • Commended as Best Place to Work in Digital category in the Computing Digital Technology Leaders awards 2025, • Recognised as one of the Best Public Sector Employers at 2025 Women In Tech Employer Awards Process: We know your time is valuable, so our application and selection process are just two stages: Apply: complete your application on Civil Service Jobs. There'll be full instructions when you click through. Interview: a single stage interview online. CLICK APPLY for more information and to start your application. JBRP1_UKTJ

Senior Applications Engineer / AV Project Engineer London, Birmingham or Manchester / Hybrid £45,000 – £65,000 DOE Company A leading provider of audio, video and lighting solutions to the entertainment sector - supplying audio visual integration services to theatres, music venues, museums and stadiums across the UK. Duties As an Applications Engineer, you will have deep technical involvement from designing and specifying audio visual solutions all the way through to commissioning stages, being hands on and acting as a key point of contact for all things technical throughout. • Designing and developing integrated AV systems, • Supporting pre-sales and technical bid activities, • Delivering commissioning and system integration support, • Producing technical documentation and system schematics, • DSP configuration, tuning and troubleshooting, • Working closely with Sales, Project Managers, Design and Installation teams, • Providing advanced troubleshooting and technical support, • Mentoring junior engineers and contributing to best practice development. Required Experience • 5+ years' experience within AV or audio systems integration with a deep understanding of audio., • Must be able to configure QSYS audio DSPs or similar., • Strong understanding of AVoIP, networking and Dante., • Design experience within Vectorworks, AutoCAD Revit or similar would be highly beneficial., • Good understanding of life safety or PAVA systems., • Full UK Driving License Package & Benefits • Salary of £45,000 - £65,000 DOE, • Life insurance cover (2x annual salary), • Medicash private healthcare plan, • 25 days annual leave + bank holidays, • Tailored training plans and development opportunities, • Pension scheme, • Cycle to Work Scheme, • Electric Car Scheme, • Income Protection Scheme How to apply? Submit your application or contact Jake Voisey on the details provided. SER-IN JBRP1_UKTJ

MERITUS are recruiting for Manufacturing Engineers to join a leading Defence Manufacturing organisation as a part of their Assembly & Integration team. MANUFACTURING ENGINEER - BOLTON - 12 MONTH CONTRACT - £32 - 35 PER HOUR (INSIDE IR35) - SC ELIGIBILITY REQUIRED - SECTOR: DEFENCE MANUFACTURING As a Manufacturing Engineer within a unit and missile assembly manufacturing facility, you will play a key role in helping ensure products are built efficiently, safely, and within budget. You will be a valued member of a collaborative Manufacturing Engineering team, supporting a range of multi-project manufacturing activities and contributing to continuous improvement across the build environment. Key Responsibilities Contribute as part of a supportive Manufacturing Engineering team within a complex assembly environment. Compile, maintain, and update Manufacturing Instructions to support consistent and effective production. Design, commission, and prove associated tooling, working closely with colleagues across engineering and manufacturing functions. Support the industrial validation process through tools such as FMEA's, FAI's, and related methodologies. Work collaboratively to identify and resolve technical issues that may arise during the manufacturing process. Support route card changes resulting from rework activities, ensuring clarity and accuracy are maintained. Help maintain Configuration Control through the embodiment of Design Modifications into Manufacturing Instructions. Support the Non-Conformance process using SAP, ensuring process integrity and timely resolution. Skills and Experience Required Formal technical Engineering/Craft Apprenticeship to NVQ Level 3 / TR23 / TR21 and Level 3 (ONC), or Formal further education certificate to HNC (or equivalent) with experience within an engineering discipline Minimum of 5 years' experience within an engineering discipline Ability to interpret engineering design drawings and translate them into clear Manufacturing Build Instructions for both skilled and semi-skilled operators Experience in electronic sub-assembly manufacture through to system-level builds Knowledge and experience of assembly processes for small/miniature electro-mechanical actuation systems Comfortable working within and contributing positively to a team-based environment Ability to recognise and understand customer requirements and respond in a considered and effective way Familiarity with company processes and procedures, and ability to work within them consistently Strong communication skills, with the ability to engage effectively within the team and across multiple levels of the organisation TPBN1_UKTJ

On behalf of our client, we are seeking to recruit a Manufacturing Assembly & Integration Engineer Lead on an initial 12-month contract basis. As the Manufacturing Assembly & Integration Engineer your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Role: Manufacturing Assembly & Integration Engineer Pay: £32 - £35 per hour Umbrella rate Location: Bolton Contract: Monday to Friday, 37 hours per week, 12 months IR35 Status: Inside SC Clearance: SC however can start on BPSS Responsibilities Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process using FMEA's, FAI's etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions. Support to the Non-Conformance Process using SAP. Qualifications & Experience Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) AND Electrical or Mechanical Engineering / Manufacturing Level 4 academic qualification (HNC, diploma, etc.)AND Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved OR Degree in a relevant Engineering subject. 5 years' experience within an engineering discipline. Can interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators. Have experience of Electronic Sub Assembly manufacture through to System level builds. Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems. Must be able to work within and contribute to a team environment. Recognise and understand customer requirements and respond to them. Understand and work to Company Processes and Procedures. Can communicate both within the working group and at various levels of the organisation. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

World Class Defence Organisation is currently looking to recruit an Electrical Systems Engineer / Architect subcontractor on an initial 12 month contract. Your base site can either be from the companies Bristol, Stevenage or Bolton office. This role will be a hybrid position – 3 days per week onsite and 2 days remote. Hourly Rate: £60 - £85 (Umbrella). Contract Duration: 6 Months initially and then ongoing and long-term thereafter. Missile Electronic Architect Job Description: Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It’s an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: Specifying/determining system electrical requirements interface definitions and characteristics between subsystems/equipment power architecture, including power budget and power profiles data communication and processing architecture requirements for EMC, bonding, grounding and screening signal safety, including routing of safety related signals Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration Reviewing and authoring reports, guidelines and processes Design assessments and analysis Working to defence/industry standards Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: Project manage the equipment(s) on behalf of the project during development, qualification and manufacture Own the requirements on behalf of the project for the equipment(s) Produce Statement(s) of Work for the associated design authority for the equipment(s) Create and update plans showing activities for the equipment(s) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance Hold regular progress reviews with the design authority for the equipment(s) Review qualification verification evidence Track and find resolution to equipment non-compliances Attend and support design reviews Skillset/experience required: Technical experience required: electrical/electronics interface definitions knowledge of defence/industry standards, etc. degree level qualification in a related subject systems engineering writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: defence weapon systems power supplies actuators data communication sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering (MBE)

Bolton Are you prepared to join an outstanding team that is at the forefront of advanced technology? If you are a driven and experienced engineer looking for a chance to contribute to top-tier Laser Directed Energy Weapon (LDEW) systems, then we have the ideal position for you! DragonFire has been and continues to be a boundary pushing weapon system development programme that has significant industry and customer engagement. Thus far the programme has been aimed at developing the UK's first Laser Directed Energy Weapon (LDEW) concept demonstrator, achieving significant success recently with several highly publicised trials activities. Following on from these successes MBDA is looking for flexible and motivated candidates to continue to develop DragonFire into a world class, deployable, LDEW air defence system. Our ambitious plans involve parallel and interleaved streams of pioneering technology experimentation and rapid weapon system development, providing opportunities across the key weapon system domains of Systems Engineering: requirements, design, performance analysis and certification. Salary: Up to £53,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The Opportunity The Effector System Project Engineer will work with the two Effector Systems RMOs (Laser Source and Beam Director) who manage external partners to deliver two key external Effector Sub-System for DragonFire. The Effector System includes a very high power laser and a an electro-optical-mechanical assembly that directs the high energy beam, which is in turn controlled by the weapon system. The Effector is integrated and assembled on a transportable container assembly. Reporting to the Effector Chief Systems Engineer; this role will be focused on the acceptance and delivery of the Effector sub-systems, their final assembly, integration, and test. Experience of complex sub-system delivery and integration is desirable, as is a working knowledge of electro-optical-mechanical systems.The Laser Source RMO will be responsible for: Interface management with the external partner, both programmatically and technically. Acceptance of and delivery of the Laser Source to final assembly, integration, and test supporting the functional integration of the Laser Source within the wider sub-system definition Project development in order to continue the evolution of DragonFire.What we're looking for from you: Individuals who have experience in or can demonstrate their ability to: Worked with third party suppliers and developed technical statements of work and deliverables Proactively engages stakeholders and builds relationships that will further the project Lead technical work packages alongside experienced project managers, to demonstrate progress and balance technical risks.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDAUK), Instagram (MBDAUK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

What You'll Be Doing Undertake systematic analysis of operations and maintenance concepts to define railway functionality in terms of sub-system requirements, system architecture and interfaces Provide systems engineering technical support on how multiple sub-systems combine to deliver required

An exciting opportunity has arisen for a Systems Engineer, focussed on Integration & Test, to join a team developing advanced flight simulation systems used by pilot training operations around the world. Key Responsibilities Contribute to the integration of hardware and software subsystems into coh