Aerospace manufacturing jobs in Elizabeth, New JerseyCreate job alerts

Job DescriptionJob Title: Quality InspectorJob Description We are seeking a diligent Quality Inspector to ensure that all customer requirements are understood and met with precision. This role involves reviewing customer purchase orders, conducting audits, and interacting with various departments to ensure product conformance. The Quality Inspector will play a crucial role in maintaining the highest standards of quality and compliance. Responsibilities • Review customer purchase orders to ensure understanding of customer requirements and facility capabilities., • Initiate and participate in corrective/preventive actions from audit findings, customer complaints, and product/process issues., • Perform audits of internal products/processes and vendors, and assist with external quality audits., • Interact with other departments and customers to ensure product conformance., • Ensure product, process, and service conformance to customer and regulatory requirements., • Use tools, gauges, and measuring equipment to verify coating thickness, location, and part dimensions., • Verify completion and documentation of required operations on the router., • Perform visual inspections for defects like cracks, chips, and scratches, ensuring good workmanship., • Document inspection results and maintain quality records according to procedures., • Identify product defects and ensure nonconforming parts are managed appropriately., • Verify product returns from outside processing and review vendor certifications., • Check product identification and ensure part numbers and quantities match customer paperwork., • Review and ensure the accuracy of certificates of conformance before signing., • Perform additional duties necessary to ensure product conformance.Essential Skills, • Experience with ISO 9001 standards., • Experience in the manufacturing industry., • Quality control knowledge and experience., • Proficiency in using calipers, micrometers, and other measuring tools., • Ability to perform visual inspections., • Experience with shipping and receiving., • Strong documentation skills.Additional Skills & Qualifications, • Lean Six Sigma knowledge is advantageous., • Compliance with minimum near vision requirements (Snellen 14/18 or Jaeger 2). Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Springfield,NJ. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Buyer Needed For Leading Manufacturing Company This Jobot Job is hosted by: Kevin Finlay Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $70,000 - $100,000 per year A bit about us: My client is a leading manufacturing company who is experiencing growth! They are looking to add a Buyer to their team who is responsible for the strategic sourcing and procurement of materials, components, and services in support of aerospace and defense manufacturing programs. Why join us? Compensation Up To $100,000 Per Year Opportunity For Growth Great Benefits Job Details Key Responsibilities: Procurement Execution: Source, negotiate, and procure materials, components, and services in accordance with approved requisitions, engineering specifications, and contractual terms. Supplier Management: Identify, evaluate, and develop qualified suppliers to support company programs. Monitor supplier performance to ensure compliance with quality, delivery, and cost objectives. Negotiation & Cost Management: Lead commercial negotiations, establish long-term agreements, and achieve cost reduction targets through strategic sourcing and supplier consolidation. Compliance & Risk Management: Ensure all purchasing activity adheres to company policies, government regulations (FAR/DFARS, ITAR, EAR), and customer flow-down requirements. Cross-Functional Collaboration: Partner with engineering, quality assurance, and production teams to resolve material or supplier issues and support new product introductions. Data & Systems Management: Utilize ERP/MRP systems to manage purchase orders, forecasts, and supplier schedules. Maintain accurate procurement data and track key performance metrics. Qualifications: Education: Bachelor’s degree in supply chain management, Business Administration, or related field (or equivalent experience). Experience: Minimum of 4 years of progressive purchasing experience in an aerospace, defense, or precision manufacturing environment. Knowledge: Understanding of FAR/DFARS, ITAR/EAR, and government contracting principles. Familiarity with AS9100, ISO 9001, and supplier quality management systems. Strong understanding of MRP/ERP systems (e.g., SAP, Oracle, Epicor). Skills: Proven negotiation, contract management, and supplier relationship skills. Strong analytical, organizational, and problem-solving abilities. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Position Summary: We are currently seeking an experienced Deburrer to join our manufacturing team. In this role, you’ll play a critical part in the final preparation of precision aerospace components by removing imperfections and ensuring all parts meet rigorous quality standards. Under general supervision working from blueprints, sketches, verbal and/or written specifications, operates and adjusts manual or numerically controlled machine tools to perform standard and repetitive sequence of operations. Additional job duties are as follows: • Sets up manual machines where speeds, feeds and sequences of tooling operations are ordinarily prescribed, • Operates numerically controlled machines where programs are approved and setups are made and maintained by others., • Removes burrs and rough edges from machine component parts using a variety of hand operations, such as; filing, deburring and performing polishing operations., • Removes scratches, burrs and tool marks from parts, using microscope or magnifier., • Uses standard shop measuring devices., • Sharpens drill tools on grinding wheel as necessary., • Operates automatic welding equipment., • Moves parts and materials to and from work area., • Maintains good housekeeping in work area., • Minimum 4 years of experience in a general machine shop environment, • Skilled in deburring and hand-finishing aerospace or high-precision components, • Familiarity with using microscopes or magnifying equipment for detailed work, • Able to read and interpret blueprints and technical drawings, • Experience operating manual shop tools and measuring devices, • Strong eye for detail and commitment to quality, • Dependable, safety-conscious, and team-oriented Salary Range:$29.56 To $33.62 Hourly Why Join Valcor? ✅ Competitive pay & benefits package ✅ Work with cutting-edge aerospace technology ✅ Collaborative, clean, and safety-first work environment ✅ Long-standing company with stability and growth opportunities ✅ Convenient location: 2 Lawrence Road, Springfield, NJ 07081 Job location is at 2 Lawrence Road, Springfield, NJ 07081 Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website:

Experience supporting audits or financial reporting in regulated industries. Controller - Manufacturing (Aerospace / Highly Regulated Industry). This position reports directly to senior finance leadership and plays a key role in strengthening financial controls, improving cost visibility, and suppor

Aerospace Engineer Job Duties: Contributes to the design, manufacturing, and testing of aircraft and aerospace products.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for an experienced Quality Manager to establish and scale our Quality Management System (QMS). Your efforts will directly contribute to the organization's success by ensuring that the complex systems we build meet the highest standards of reliability and performance. This role requires a speed & execution mindset coupled with attention to detail.Key Responsibility Areas: • Develop, implement, and manage the company’s Quality Management System (QMS) compliant with relevant ISO standards, • Oversee supplier quality, incoming inspection and in process validation for critical hardware components, • Manage and develop company policies, programs, and procedures for non-conformance, corrective actions, and anomaly investigations, • Work with the Company’s leadership and technical teams to integrate quality checkpoints into the engineering design and manufacturing lifecycle, • Work with the technical teams to ensure proper quality measures are instituted for both hardware and software, • Lead internal audits and facilitate continuous improvement initiatives across cross-functional teamsIdeal Experience & Skillsets:, • 10+ years of relevant work experience in Quality Assurance / Quality Control within aerospace, automotive, or energy sectors, • Past leadership positions and experience managing and growing Quality organizations, • Deep knowledge of ISO 9001, AS9100, NQA-1 or other relevant quality standards, • OSHA 30hr Certification and a strong safety focus, • Excellent oral, written, and interpersonal communication skills, • Ability to work across cross-functional teams to support quality challenges, • Strong ethics and discretionCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for experienced, highly motivated mechanical engineers to join its rapidly growing team. Mechanical engineers will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s stellarator fusion systems. You will be responsible for the structural and thermomechanical design, manufacturability, analysis, development, and commissioning of these components. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Have ownership of the design and development of primary and secondary mechanical fusion components and subsystems, • Work with core system-level development teams to define prototyping requirements, • Produce mechanical engineering designs, drawings, specifications, and parameters from first principles with appropriate tolerances for vendor quoting and manufacturing, • Design tooling for assembly, • Perform thermal, structural, and electromagnetic analysis and simulation using Ansys and COMSOL, • Incorporate design for manufacturing principles and support first builds, • Support the implementation of tooling and manufacturing, • Design and execute qualification testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholders, • Mentor junior engineersIdeal Experience & Skillsets:, • Minimum of a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields, • Minimum of 5 years of experience, • Extensive experience as a lead designing, building, and commissioning custom systems, • Experience in mechanical engineering using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Management of complex assemblies with multiple contributors, • Experience specifying machining, welding, and/or fabrication requirements, • Ability to mentor junior engineers in methods to decompose complex problems, and review that work, • Ability to take initiative and guide the design and analysis of complex components and systems with the aid of peers and team members, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Familiarity with GD&T (ASME Y14.5) & Drawing Standards, • Experience owning systems or complex sub-systems, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s ownCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description JOB SUMMARY Under immediate supervision, working from blueprints, sketches, verbal and/or written specifications, operates manual or numerically controlled machine tools to perform standard sequences of operations. Sets up manual machines where speeds feeds and sequence of tooling operations are ordinarily prescribed. ESSENTIAL FUNCTIONS: • Sets up manual machines where speeds feeds and sequence of tooling operations are ordinarily prescribed, • Operates numerically controlled machines where programs are proved., • Sets up and operates other manual machines in the work area and maintains tolerances by adjusting as necessary., • Is responsible for inspecting the work to ensure it meets basic quality requirements., • Can perform detailed sub-assembly functions for certain products., • Operates automatic welding equipment., • Uses required shop measuring devices., • Sharpens drill tools on grinding wheel as necessary., • Maintains good housekeeping in work area., • May be required to perform other duties as directed by supervision. MINIMUM QUALIFICATIONS • 5-7 years’ experience as a general machine shop operator and demonstrated skills., • Familiar with Machine Shop procedures, special processes, and tooling. REQUISITE SKILLS REQUIRED • Demonstrated effective verbal and written communication skills., • All work is performed under the minimum supervision of the Manager and/or Supervisor, as required. EQUIPIMENT/MACHINERY USED • Knowledge of Machining or Manufacturing operations is beneficial. PHYSICAL REQUIREMENTS • Lifting up to 50lbs regularly, pushing, pulling, standing for long periods of time, manual dexterity, visual acuity, and typing. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Salary Range: $26.29 To $30.79 Hourly Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description This is a rare chance to join our client, a globally recognized aerospace manufacturer, a company that has spent 75+ years pushing the boundaries of turbine engine technology. Consistently ranked among the world's best employers, this publicly traded organization backs that reputation with a culture that genuinely prioritizes its people. What's in it for you? • Stability and momentum — a growing public company with deep industry leadership, • Benefits that start on day one: premium health coverage and a 9% 401(k) match — one of the strongest in the industry, • Employer-funded retirement savings contribution each pay period, • A workplace culture built around collaboration, inclusion, and continuous improvement, • Structured development programs to help you grow into your next role Job Summary: The selected candidate will report to the Plant Manager and provide managerial and leadership support to the Procurement and Supply Chain Team to ensure Business Unit goals are met through the execution of procurement strategies. Procurement strategies include but are not limited to the security of supply, cost savings, optimization of processes, and supplier risk mitigation. The overall goal is to support production schedule while obtaining the best achievable value for supplies and services while maintaining compliance with company procedures. Environmental Health & Safety Responsibilities: • Expected to assist in the implementation of company EHS value and policy statement and its accompanying principles., • Comply with all department, facility, corporate, and regulatory EHS regulations., • Wear all required personal protective equipment., • Report all job-related illnesses and injuries (per employee handbook)., • Report all Safety, Health & Environmental concerns to your supervisor promptly., • Directly responsible for the overall Plant procurement operations which includes direct, indirect, and Capital spend., • Provide guidance and leadership to Plant Procurement Specialists and Supply Chain Planners., • Collaborate with the value stream (Operations, Maintenance, Engineering, Quality, Finance, etc.) to ensure procurement strategies align with Plant and BU goals., • Share savings targets of plant-specific spend with Location Management, Category Management, and stakeholders., • Manage supplier sourcing, negotiations, contracting, and the execution of agreements to support plant requirements., • Monitor supplier performance and place countermeasures to resolve any issues that may arise., • Communicate supplier issues to BU Procurement, Category Management, and Quality., • Review Plant Procurement metrics and take the necessary actions to ensure Plant and BU targets are met., • Responsible to ensure Procurement retains compliance with all auditing agencies., • Ensure the successful execution of ERP-related procurement processes including system enhancement implementations., • Responsible for Raw Material forecasting, inventory management, cost management, and researching potential BOM issues affecting inventory accuracy., • Oversee ERP item and raw material transactional activity to drive inventory accuracy — including accurate cycle count program monitoring and maintenance for raw materials., • Manage project-related teams and plant procurement and supply chain initiatives. BASIC QUALIFICATIONS: • Bachelor's degree from an accredited institution in Business, Management, Supply Chain, Logistics, IT, Politics, Policy, Finance, Accounting, Data Science/Analytics, Marketing/Communication, Economics, Mathematics, or Engineering., • Minimum 6 years' experience in Procurement or Supply Chain., • Knowledge and understanding of procurement and financial best practices and compliance (Sarbanes-Oxley, UCC Laws, Import/Export Laws, etc.)., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • Procurement experience working in a fast-paced manufacturing environment., • Ability to write and negotiate complex contracts for the obtaining of goods and services., • Experience in Oracle or a similar type of Enterprise Business System., • Willingness to frequently visit the shop floor for a better understanding of Plant operations., • Customer-oriented personality. Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: Representation/employer clarification: This search is being conducted by Augmentis on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring.

Job Description Technician A Technician performs the assembly, testing, and verification of advanced fluid‐control components for Aerospace, Nuclear and other applications. This role is ideal for a hands‐on technician who thrives in a precision manufacturing environment and enjoys working with complex electro‐mechanical systems. Key Responsibilities • Perform assembly and performance testing of mechanical and/or electro‐mechanical fluid‐control devices in accordance with engineering procedures, blueprints, and schematics., • Operate, maintain, and help develop high‐pressure test systems, including pneumatic, hydraulic, and calibration‐fluid test stands and pumps., • Conduct electrical testing and verification using a variety of electronic diagnostic tools., • Work within controlled clean‐room environments and conduct particulate analysis with accurate data collection., • Troubleshoot, repair, and validate hardware using systematic diagnostic methods., • Utilize oscilloscopes, and other diagnostic equipment to support testing and analysis., • Maintain a clean, safe, and organized work area., • Lift and move equipment or components up to 50 lbs as needed. Required Skills & Experience • Minimum 5 years of technical or mechanical maintenance experience., • Experience using various hand and measurement tools including but not limited to torque wrenches, height gauges, and calipers., • Ability to read and interpret blueprints, schematics, and technical procedures., • Proven experience assembling and testing electro‐mechanical hardware., • Hands‐on experience with high‐pressure fluid, gas, and cryogenic testing., • Proficiency in electrical testing, including dielectric and insulation‐resistance testing., • Strong computer literacy, including Microsoft Word and Excel., • Experience working in clean‐room environments., • Manufacturing or machining experience is a plus., • Demonstrated ability to troubleshoot and repair hardware using diagnostic tools. Education • Minimum: High School Diploma, • Preferred: Vocational school graduate, Associate Degree or Certificate in Engineering Technology Additional Considerations • Strong team orientation and ability to collaborate across functions., • Capable of working independently with minimal supervision., • Willingness to mentor junior technicians. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Salary Range:$34.00 To $50.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for experienced, highly motivated mechanical engineers to join its rapidly growing team. Mechanical engineers will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s stellarator fusion systems. You will be responsible for the structural and thermomechanical design, manufacturability, analysis, development, and commissioning of these components. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Contribute to the design and development of primary and secondary mechanical fusion components and subsystems, • Produce mechanical engineering designs, drawings, specifications, and parameters from first principals with appropriate tolerances for vendor quoting and manufacturing, • Design tooling for assembly, • Perform thermal, structural, and electromagnetic analysis and simulation using Ansys and COMSOL, • Incorporate design for manufacturing principles and support first builds, • Support the implementation of tooling and manufacturing, • Design and execute qualification testing, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Minimum of a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields, • Experience designing, building, and commissioning custom systems, • Experience in mechanical engineering using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience specifying machining, welding, and/or fabrication requirements, • Ability to decompose and solve complex problems, • Ability to take initiative and guide the design and analysis of complex components and systems with the aid of peers and team members, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Familiarity with GD&T (ASME Y14.5) & Drawing Standards, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skillsCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description Technician A Technician performs the assembly, testing, and verification of advanced fluid‐control components for Aerospace, Nuclear and other applications. This role is ideal for a hands‐on technician who thrives in a precision manufacturing environment and enjoys working with complex electro‐mechanical systems. Key Responsibilities • Perform assembly and performance testing of mechanical and/or electro‐mechanical fluid‐control devices in accordance with engineering procedures, blueprints, and schematics., • Operate, maintain, and help develop high‐pressure test systems, including pneumatic, hydraulic, and calibration‐fluid test stands and pumps., • Conduct electrical testing and verification using a variety of electronic diagnostic tools., • Work within controlled clean‐room environments and conduct particulate analysis with accurate data collection., • Troubleshoot, repair, and validate hardware using systematic diagnostic methods., • Utilize oscilloscopes, and other diagnostic equipment to support testing and analysis., • Maintain a clean, safe, and organized work area., • Lift and move equipment or components up to 50 lbs as needed. Required Skills & Experience • Minimum 5 years of technical or mechanical maintenance experience., • Experience using various hand and measurement tools including but not limited to torque wrenches, height gauges, and calipers., • Ability to read and interpret blueprints, schematics, and technical procedures., • Proven experience assembling and testing electro‐mechanical hardware., • Hands‐on experience with high‐pressure fluid, gas, and cryogenic testing., • Proficiency in electrical testing, including dielectric and insulation‐resistance testing., • Strong computer literacy, including Microsoft Word and Excel., • Experience working in clean‐room environments., • Manufacturing or machining experience is a plus., • Demonstrated ability to troubleshoot and repair hardware using diagnostic tools. Education • Minimum: High School Diploma, • Preferred: Vocational school graduate, Associate Degree or Certificate in Engineering Technology Additional Considerations • Strong team orientation and ability to collaborate across functions., • Capable of working independently with minimal supervision., • Willingness to mentor junior technicians. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Salary Range:$29.00 To $45.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for an experienced, highly motivated Director - Mechanical Engineering to join its rapidly growing team. You will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s integrated stellarator fusion systems. You will be responsible for structural and thermomechanical design, manufacturability, development, and commissioning of these components. You will drive requirements definition, design trades, and integration across disciplines. You will build and lead an integrated team drawing from disciplines including mechanical design, structural and stress analysis, thermal/fluids analysis, materials engineering, manufacturing and fabrication engineering, nuclear engineering, and vacuum systems engineering. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Own the technical baseline for primary and secondary mechanical fusion systems, including requirements, design, development, analysis, verification, though manufacturing, commissioning, and operation., • Drive system-level trades across relevant performance domains (e.g. thermal, structural, electromagnetic, nuclear, vacuum, cryogenic)., • Maintain accountability for the key performance metrics that define system success., • Define and enforce interface controls., • Work with core system-level development teams to define requirements., • Lead system design and development, addressing the complex 3D non-axisymmetric geometry unique to stellarators., • Drive disciplined design trades balancing performance, manufacturability, and schedule., • Own the analysis campaigns required to demonstrate system feasibility and adequate margin under all operating conditions (normal operation, off-normal events, transients)., • Partner with manufacturing and fabrication engineering to ensure all components can be built, inspected, and assembled within realistic tolerances., • Address stellarator-specific fabrication challenges driven by non-axisymmetric geometry and tight tolerance requirements., • Own the assembly sequence and integration plan for systems within the overall machine build., • Serve as the system-level integrator for system interfaces., • Work with Systems Engineering & Configuration Management to define and maintain interface control documents, requirements flow down, and configuration baselines., • Coordinate across engineering tools to establish CAD/CAE/PLM workflows and simulation infrastructure., • Make scope and schedule trade-offs, escalating risks and decision points with clear technical rationale., • Build, lead, and develop the integrated engineering team, spanning multiple disciplines., • Define work packages, priorities, and deliverables across the team., • Maintain technical risk registers and drive mitigation plans to closure., • Build and maintain a technically rigorous team culture, setting expectations for analysis quality, design rigor, and documentation standards.Ideal Experience & Skillsets:, • 15+ years of experience in mechanical engineering, nuclear engineering, or a closely related field, with significant time spent on large-scale, high-performance hardware systems., • Deep technical knowledge of at least two of the following: structural analysis, thermal-hydraulic analysis, vacuum system design, cryogenic engineering, nuclear engineering, high-heat-flux component design, manufacturing engineering., • Demonstrated experience managing complex, multi-disciplinary hardware development programs from concept through fabrication and test., • Strong understanding of materials behavior and manufacturing processes for demanding mechanical systems., • Proficiency with engineering tools: CAD (NX preferred), FEA (ANSYS preferred), and PLM systems., • Bias toward ownership: you take accountability for outcomes, not just activities., • Ability to make system-level decisions under uncertainty and defend them with engineering rationale., • Effective at leading integrated, multi-disciplinary teams through clarity of scope and technical credibility., • Comfort with ambiguity and pace of a startup building first-of-a-kind hardware., • Strong written and verbal communication: you can present system status, risks, and trades to executives and to the engineering team with equal effectiveness., • Track record of building and leading high-performing technical teams., • Exceptional work ethic and a bias toward action., • Innate desire to learn, innovate, and challenge assumptions, including your own., • At least a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields.Company Benefits:, • Salary range $135,000-$235,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

The Buyer is responsible for the strategic sourcing and procurement of materials, components, and services in support of aerospace and defense manufacturing programs. The Buyer acts as a key liaison between suppliers, engineering, quality, and program management to drive supplier performance, mitiga

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Builders General Supply Company (BGS) is proud of our reputation as a business committed to quality building materials and exceptional customer service — and it’s all possible because of our dedicated team.We are seeking a reliable and responsible OPERATIONS MANAGER to join our team in our Ediso

Job Title: Salesforce Project Manager.Location: NY/NJ (Hybrid – 3 days/week).Seeking a Senior Project Manager to lead Salesforce B2B delivery projects, managing end-to-end execution, stakeholders, and cross-functional teams.Manage multiple Salesforce projects (scope, timeline, budget).Drive projec

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates.No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT.Commercial Con

Per Day Location: Jersey City, NJ Work Mode: Hybrid Summary: Under the CIB Transversal Americas COO Office, the DRIVE Project Implementation Americas is building core expertise in managing transversal and transformation projects across all Global Markets & Global Banking Business Lines.Responsibilit

Job Summary Under general supervision, manage the relationship with existing accounts.Responsible for managing a book of business for existing accounts and generating revenue on assigned accounts.Serve as the primary interface for all products and services and create demand for the organization's pr

Job Title: Operations Project Manager Location: East Hanover, NJ Pay range: $600 per diem to $750 per diem Job Summary We are seeking an experienced Operations Project Manager to lead and deliver strategic initiatives across Front Office, Operations, Finance, IT, Compliance, and Risk functions.This

We are seeking an experienced Senior Designer, Mobile Design Systems to join our Design System team.This role is crucial for enhancing brand and customer experience across the digital product portfolio.You will collaborate with a geo-distributed mobile native team, collaborating with multi-disciplin

Join Our Team as a Project Manager for our Building Sciences projects!.Are you ready to elevate your career with a dynamic and growing firm that values your contributions and offers exciting opportunities for advancement? Hillmann Consulting, LLC, a leading nationwide environmental consulting firm,

Source One is a consulting services company and we're currently looking for the following individual to work as a consultant with our direct client, a regional utility and gas company in Newark, NJ.No Third-Party, No Corp to Corp, No Sponsorship Now or Future.Title: Project Manager - Engineering.Hyb

Flow-Turn has been a trusted global manufacturer of powered belt curves and specialty conveyors since 1981.Headquartered in Union, New Jersey, we specialize in designing and producing custom solutions tailored to meet diverse customer requirements.Serving industries such as baggage handling, packagi

Job Title: Energy Project Manager.Locations: Newark New Jersey 07102.Hybrid - Remote on Mond/Friday, in-office Tues-Thurs at Newark office + potential on-site inspection once a month.Provide program management oversight over scope, schedule, and budget of energy efficiency projects in compliance wit

We are in search of a Manufacturing Engineer. You will play a critical role in creating and refining processes to improve manufacturing safety, quality, and productivity. Troubleshoot manufacturing issues, including electrical assembly, wiring, bus bar fabrication, and enclosure modifications.

NuLife Power Services manages complex solar decommissioning and repowering projects for Fortune 500 companies, REITs, asset managers, and EPCs.We run high-risk, multi-site transitions with institutional-grade safety standards and a no-excuses approach to execution.We're lean, growing fast, and serio

EVOS Construction, a division of All Season Global Solutions, is seeking an experienced and driven professional to join our growing team.We specialize in delivering fully integrated, turnkey construction solutions from concept through completion, with a focus on quality, efficiency, and client satis

Position: Senior Project Manager.Location: Jersey City, NJ, 07310.Job Type: Temporary Assignment.TekWissen is a global workforce management provider headquartered in Ann Arbor, Michigan that offers strategic talent solutions to our clients world-wide.Our client is a company who is a provider of bank

Knowledge of Machining or Manufacturing operations is beneficial.

As an Assistant Manager, you set the tone for the store and the team and help bring our brand to life for our customers.You're responsible for driving profitable sales growth through all aspects of the store including customer and product operations, merchandising, and talent development.You are res

Pactiv Evergreen - - Responsibilities: Operate bag machines safely and efficiently to produce high quality bags; Check bags for quality defects and complete quality paperwork; Monitor and adjust bag machinery including starting, stopping, jogging, and threading; Change rolls and manage paper alignm

Collectors is the leading creator of innovative technology that provides value-added services for collectors worldwide.We grade, authenticate, vault, and sell millions of record-setting collectibles, all while modernizing and digitalizing the process to further our mission of helping collectors purs

The CNC Machinist is responsible for set up and operating machining, grinding and finishing, equipment in accordance with work instructions, quality requirements to meet standards and production schedules.Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and mat

Follow safety rules, manufacturing instructions, work rules and other manufacturing guidelines.

As a project manager you will gain a variety of experience in an exciting and fast-paced atmosphere.You will be part of a team of staging professionals who are responsible for the design, execution and installation of our projects.Be a team member and work with your project team on each specific pro

This is a fast-paced position in a sheet metal manufacturing environment. Willingness to adapt and work in a fast-paced manufacturing environment.

Alexander INC, Is A NJ MBE / SBE and DOT certified firm, has been serving the needs of the commercial industrial and public sectors construction industry with our extensive experience in the paving and milling of roads, parking lots, walkways/paths, etc.We also specialize in sidewalks and curbs, dra

Information about the Company:.Cenveo is a leading North American manufacturer of envelopes with over 100 years of experience and approximately 30 billion envelopes manufactured annually.Schedule: Mon - Fri / Sat required during busy season/based on business needs.Machine Packer Responsibilities & D

Under supervision, does bench, general shop and outside machinist work aboard the vessels and terminals of the Staten Island Ferry; performs related work.Examples of typical tasks: sets up and operates machine shop equipment, such as engine lathes, shapers, milling machines, drill presses and grinde

ESSENTIAL DUTIES & RESPONSIBILITIES:.Programs and edits CNC turning and or milling machines for production efficiency to manufacture parts compliant to drawing specifications.Ability to read blueprints, drawings, specifications and set up requirements.Selects, aligns and secures holding fixtures, cu

JD: Manage large to medium-scale or low to medium to high complexity projects within programs and standalone projects.Responsible for delivery of project.Lead stakeholders in the refinement of the project charter.Develop & maintain project schedule &.

Serves as a manufacturing focal point for intelligent analysis of quality issues, determining true root causes, and implementation of permanent corrective and preventive actions. Hands-on quality and manufacturing experience in an ISO certified environment.

Prior manufacturing/machining experience.