Aerospace manufacturing jobs in Uniondale, New YorkCreate job alerts

Job Description Schivo Medical, located in Plainview , NY, is a contract manufacturer that make medical components that enhance and save people lives. Quality Control Inspector Job Overview: Quality Control related tasks such has verifying components that are produced to print and relate the results to appropriate personal. Quality Control Inspector Knowledge, Skills and Abilities Required: Perform in-progress inspection for all machined components. • Operate CMM machines, Keyence and visions systems, • Review operator inspection reports and traveler information., • Submit reports to shift supervisor and communicate the results to machine operators., • Perform First Article Inspection for new parts (set ups), • Follows established departmental policies, procedures, and objectives, continuous quality improvement objectives, and safety, environmental, control standards., • Detail knowledge of inspection techniques, tools and methodology, • Experience using measuring tools a plus, • Ability to read and interpret engineering drawings and blueprints, • Must possess the ability to use a wide variety of measuring devices to perform dimensional inspection of components produced., • Must be dependable and possess a willingness to learn new techniques., • Medical and Aerospace manufacturing experience with emphasis on FAIR, • Follow the quality standards of ISO-13485, • Knowledge of GD& T helpful Minimum Job Requirements & Education* Completed AAS degree(s) from an accredited institution that are above the minimum education requirement may be substituted for experience on a year for year basis. Concentration on taking classes based in quality and metrology plus High school diploma or GED; at least 2 years of experience in a CNC Manufacturing environment Benefits:* • 401(k), • 401(Match), • Dental insurance, • Health insurance, • Vision insurance, • Life insurance, • EAP Program, • Employee referral program, • Long Term/short term disability, • Free coffee and tea daily, • Employee incentives Must be authorized to work in the United States*** Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description We are seeking an experienced Inspector to support a precision aerospace manufacturing environment. This role is responsible for performing in‑process, final, and receiving inspections on machined and assembled components to ensure compliance with engineering drawings, specifications, and quality standards. The Inspector works closely with Manufacturing, Engineering, and Quality teams in an AS9100‑compliant environment. Key Responsibilities • Perform in‑process, final, and receiving inspections, • Inspect machined parts, sub‑assemblies, and finished assemblies, • Read and interpret engineering drawings, blueprints, and GD&T, • Use precision measurement tools including:, • Calipers, • Micrometers, • Height gauges, • Pin gauges and indicators, • Document inspection results and maintain traveler records, • Identify, document, and report non‑conforming material, • Support First Article Inspection (FAI) activities (preferred), • Communicate inspection findings with Manufacturing and Engineering teams, • Maintain accurate inspection records per quality requirements, • Ensure compliance with aerospace quality standards (AS9100)Required Qualifications, • Experience in manufacturing or aerospace inspection, • Strong understanding of blueprint reading and GD&T, • Experience inspecting tight‑tolerance precision components, • Comfortable working independently with minimal supervision, • High attention to detail and documentation accuracyPreferred Qualifications, • Experience with CMM or vision inspection systems, • Prior work in an AS9100 or ISO‑regulated environment Identify, document, and report non‑conforming material Support First Article Inspection (FAI) activities (experience preferred) Communicate findings with Manufacturing and Engineering Maintain inspection records per quality requirements Ensure compliance with aerospace quality standards (AS9100) Top Skills Details Inspection, final inspection, gd&t, calipers, micrometer, height gauges Additional Skills & Qualifications Experience in manufacturing or aerospace inspection Strong understanding of blueprint reading and GD&T Familiarity with tight‑tolerance precision components Ability to work independently with minimal supervision Attention to detail and documentation accuracy CMM or vision inspection experience preferred, not required Job Type & Location This is a Contract position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $24.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Our client is seeking a dedicated Electronics Assembler to join their Temperature Control Systems Department. Job Function: Key Responsibilities: • Assemble electronic subassemblies according to engineering specifications and work instructions, • Perform detailed inspections and testing of assembled components to ensure quality standards, • Collaborate with engineering and production teams to troubleshoot and resolve assembly issues, • Maintain a clean and organized work area, adhering to safety and quality protocols, • Document assembly processes and test results accurately in company systems, • Assist in the continuous improvement of assembly procedures and workflows Skills and Qualifications: • Proven experience in electronic assembly, preferably within aerospace or related industries, • Strong understanding of electronic components, wiring, and soldering techniques, • Excellent attention to detail and manual dexterity, • Ability to read and interpret technical drawings, schematics, and work instructions Job Requirement: Qualifications Education/Experience • High school diploma or general education degree (GED); or one to three years related experience and/or training., • Experience with Electro/Mechanical assemblies is a plus, • Ability to follow detailed written and verbal instructions in English., • Ability to read and understand technical drawings (blueprints)., • Experience reading and following Manufacturing Procedures or Specifications to accurately complete job assemblies., • Ability to perform repetitive assembly operations.

Company For over 50 years, Hitemco has been partnering with leading edge technology companies to help make critical surfaces successful. We specialize in high performance surface coatings and understand the thin line between a critical part and the environment that it operates in. Whether it’s in aerospace, energy, minerals, or transport, we work with our customers to deliver outstanding materials knowledge, fast production turn times, reliable forecasts, and great customer service. Lincotek Group is a world leader in the coatings industry and is active, through its different operating business units, in the European, Asian and American continents Position Summary The objective of the Industrial Maintetnance Technician is to support plant production machinery and facility maintenance activities, as required. Essential Functions • Undertaking and completion of preventive maintenance activities to plant equipment utilizing the plant computerized maintenance management system., • Troubleshooting equipment problems or failures, determining the appropriate actions for repair, specifying parts and materials needed for repair, and ordering parts as required., • Developing solid, professional working relationships with all plant employees, and responding to requests for maintenance in a timely manner so as to reduce plant equipment downtime., • Must have the ability to complete repairs to equipment with minimal supervision, especially while working on the off-shifts., • Perform all planned and unplanned facility maintenance activities, • Must be knowledgable in general building maintenance, Plumbing and Electrical., • Analysis, purchase, installation and coordination for new plant/processes consumables and spare parts., • Knowledge of how to properly and safely use handheld and facility power tools and equiptment., • Performs other duties as assigned. Work Environment This job operates in both an office environment and a manufacturing environment. The role routinely uses standard office equipment, such as computers, phones and photocopiers. The individual will be required to adhere to safety policies and procedures on the manufacturing floor. Physical Demands While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand, walk, use hands to finger, handle or feel and reach with hands and arms. The employee is occasionally required to sit, climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 lbs and occasionally lift and or move up to 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position, requiring 8 hours of work per day Monday thru Friday, some overtime as business needs change. Willing to work flexible shifts, overtime, and weekends, if necessary. Requirements • High School Diploma or GED, • Minimum of 5 years of experience performing the essential functions of the job., • Knowledge of CMMS, PLC, vacuum, electronics, welding, precision measuring instruments and ability to understand Blueprints, • Career readiness certificate (minimum silver), • Able to lift at least 50lbs, • Electrical experience and License preferred, • Forklift and Aerial Lift Certified $35-$40/hr based on experience. Lincotek Surface Solutions provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Operational AI Insights Analyst Location: On-site in Farmingdale, NY Our confidential client is a well-established aerospace–adjacent manufacturer that is investing in modern analytics and practical AI to super-charge decision-making across operations, supply-chain, and sales. As the first dedicated AI Analyst, you’ll turn messy, real-world datasets into clear answers that tell teams what to build, buy, and sell next. If you are early-to-mid career, love translating business puzzles into code-driven insights, and want daily access to leaders who will use your work, this is a rare ground-floor opportunity. Compensation & Benefits • Competitive base salary plus annual performance bonus., • Comprehensive medical, dental, and vision coverage; 401(k) with company match; generous PTO & holidays., • Professional development budget and direct mentorship from C-suite and IT leadership. Key Projects You’ll Own • Real-time Sellable-Stock Engine – automate today’s manual spreadsheets so sales can quote inventory with confidence., • Production & Materials Forecasting – build lightweight predictive models that align capacity, demand, and purchasing windows., • Purchasing Optimization – surface buy-now vs. wait recommendations that balance lead-times, costs, and contract dates., • Self-Service Dashboards – deliver intuitive Power BI/Excel/SQL visualizations that operations and finance teams can refresh on their own. Day-to-Day Responsibilities • Translate diverse business questions into experiments, proofs-of-concept, and AI-assisted solutions., • Develop Python or low-code scripts that pull from SQL, ERP/MRP, and Excel sources to automate analysis workflows., • Build, iterate, and document dashboards or reports; present insights to stakeholders in clear, non-technical language., • Evaluate model and LLM output for accuracy, reliability, and hallucination risk; recommend guardrails where needed., • Champion data quality: flag anomalies, close gaps, and streamline collection processes across departments., • Stay current on practical AI/ML advances that can be safely adopted inside a mid-sized manufacturing environment. Ideal Background • Bachelor’s degree in data/Analytics, Information Systems, Engineering, Finance, or similar field -or- equivalent hands-on experience., • Proficiency with Python (or R/Julia), SQL querying, and advanced Excel; experience wiring APIs or basic software architecture is a plus., • Experience working with business intelligence platforms such as Power BI, Tableau, or comparable tools, along with strong knowledge of forecasting methods and statistical analysis principles., • Proven ability to turn ambiguous business problems into data models and actionable recommendations., • Comfort working onsite in a small, highly collaborative team; excellent communication and curiosity are must-haves., • Bonus points for prior exposure to manufacturing, supply-chain analytics, or aerospace/fastener industries. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Description The Assembly Technician is responsible for the precision mechanical assembly of aerospace fluid control components, valves, and manifolds in accordance with engineering drawings, travelers, and work instructions. The role supports production, quality, and testing operations in a regulated manufacturing environment Skills Assembly, hydraulics, Mechanical assembly, hand and power tools, torque tools, blueprint reading Top Skills Details Assembly,hydraulics,Mechanical assembly,hand and power tools,torque tools,blueprint reading Additional Skills & Qualifications Assemble precision mechanical components and sub‑assemblies Build valves, manifolds, and aerospace fluid system components Follow assembly drawings, work instructions, and travelers Use hand tools, fixtures, and torque tools Perform self‑inspection and document assembly results Conduct basic testing or leak checks (role‑dependent) Maintain clean and organized workstations Support quality and continuous improvement initiatives Communicate with Manufacturing and Quality teams Adhere to safety and quality standards Experience Level Intermediate Level Job Type & Location This is a Contract position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $19.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

The Shipping Clerk is responsible for managing both incoming and outgoing materials in a highly regulated aerospace and defense manufacturing environment. This role ensures all shipments and receipts are accurate, properly documented, and compliant with industry standards and government regulations. The ideal candidate is detail-oriented, organized, and experienced in handling controlled materials with strict traceability requirements, and is outgoing, keeping track of Shipments and the receipt of materials and products. Job Function: Requirements • Prepare, package, and process outbound shipments in accordance with customer and regulatory requirements., • Generate shipping documentation including packing lists, bills of lading, certificates of conformance, and export paperwork., • Verify outgoing shipments against work orders and customer specifications., • Coordinate with carriers for pickups, including domestic and international shipments., • Receive and verify incoming materials against purchase orders and packing slips., • Check for damage, accuracy, and proper documentation upon receipt., • Accurately enter receipts into ERP/MRP systems and route materials to appropriate departments., • Maintain traceability of materials, including lot and serial number tracking., • Maintain accurate records of all shipping and receiving transactions., • Ensure compliance with AS9100 and internal quality procedures. Job Requirement: Qualifications Education & Experience: • High school diploma or equivalent required., • Working knowledge of shipping and receiving procedures and documentation., • Familiarity with ERP/MRP systems and warehouse software., • Understanding of export control regulations (ITAR/EAR) preferred., • Strong attention to detail and organizational skills., • Ability to read and interpret purchase orders and shipping documentation., • Effective communication and teamwork skills., • Ability to manage multiple tasks in a fast-paced environment. Preferred Qualifications • Experience in an AS9100-certified environment., • Forklift certification., • Experience handling hazardous materials.

\n Process Operator - 3rd Shift \n We are looking for a Process Operator- 3rd Shift for our Westbury, NY facility. In this role under close supervision, you will set up and operate all equipment within the production environment. Responsible for measuring and controlling product quality and making process changes within the scope of the standard operating procedures. Maintains a clean and safe working environment. \n We offer: \n Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment! \n The perks and benefits of working at Oerlikon include the following: \n\n • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong. \n, • Excellent Dental and Vision coverage.\n, • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey. \n, • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals \n, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!\n, • Generous paid time off to support your physical and mental wellbeing.\n, • 12 paid company holidays to occasionally extend your weekends or time off. \n, • Flexible hours or remote work environment available for certain positions\n, • 100% company paid life insurance and disability insurance\n, • Reports to shift supervisor on production status, problems, and deviations.\n, • Reads and applies information contained in specifications to determine equipment settings that impact product outputs.\n, • Examine material in order to ensure conformance to established standards.\n, • Maintains processing reports to record and enter into batch records and databases.\n, • Ensure that correct materials are being utilized according production records and planner schedule.\n, • Identifies and labels all production materials in process at all times.\n, • Follow and comply with all safety and work rules and regulations and takes action to correct unsafe conditions where identified.\n, • Maintains department housekeeping standards.\n, • Technical Trades School or associates degree preferred.\n, • Ability to service and assemble manufacturing equipment such as industrial vibratory screening units.\n, • Must be able to read/comprehend written and verbal instruction in English.\n, • Must be able to communicate 1 on 1 and in small groups.\n, • Must have basic math skills to add, subtract, multiply and divide using weight and volume units (Example: kilograms, pounds, and gallons)\n, • Must have a minimum of 2 years of manufacturing experience or similar.\n, • Must be able to recommend improvements to the process with regard to safety, quality, and productivity.\n, • Must be able to operate forklifts and experience also working with electric hoists/cranes is preferred.\n #joinoerlikonus #joinourteam \n Are you curious? Then release your passion to succeed and APPLY to discover how you can help us build a better world and realize how you can make a personal difference by joining our global team! Our commitment is your success! \n Oerlikon is required by law to include a reasonable estimate of the current compensation range for this position, which is $20.00 to $22.00 per hour. Some positions within Oerlikon may also offer eligibility to participate in a discretionary incentive program. The salary of the finalist(s) selected for the role will be based on a variety of factors that are considered in making compensation decisions including, but not limited to, internal equity, job location, work experience, education, training, certifications, licenses, etc. Therefore, as compensation decisions are dependent on the facts and circumstances of each individual, it is likely that not all applicants will be hired at the highest end of the listed compensation range. Our total compensation package goes beyond base compensation and it will include a competitive benefits package starting with 2 weeks paid time off accrued on a monthly basis, 12 holidays, 48 hours personal/sick time (exception for NY where we follow State law,) medical, dental, vision, 401K, holidays, pet insurance and tuition reimbursement all effective day one of hire. \n About us \n Oerlikon is a global leader in surface technologies and advanced materials. With a unique portfolio spanning surface engineering, high‑performance materials, coating equipment and components, we make products better by enhancing performance, efficiency and sustainability. Oerlikon serves a wide range of industries, including aerospace, automotive, energy, medical, luxury, semiconductors and tooling. Head‑quartered in Pfäffikon, Switzerland, Oerlikon operates in 38 countries with approximately 9,500 employees, achieving sales of CHF 1.6 billion in 2024. \n

Position Summary: The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. Supervisory Responsibilities: • None Duties and Responsibilities: • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. Required Skills and Abilities: • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills Education and Experience: • Bachelor's degree in Industrial Engineering, • 3-5 years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Due to ITAR Restrictions, an export license may be required. Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Compensation Employee Type: Salaried Salary Minimum: $85,000 Salary Maximum: $105,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Position Summary: TTM is an advanced-technology leader in highly sophisticated surveillance, communications, analysis and integration solutions. Our systems are deployed across a wide range of land, sea and air applications, providing our aerospace, defense and commercial customers with a distinct tactical advantage. In this role, the PCB Staff Design Engineer will design moderate to complex printed circuit board (PCB) layouts in the domain of Digital, Analog, Power & RF interconnect applications. This includes responsibility for circuit board layout conceptualization, (CAD application by means of Siemens Xpedition, PAD's or Cadence Allegro tool sets), detail design activities and value-engineering in support of internal TTM programs. Areas of emphasis/focus include physical design (CAD implementation)/documentation utilizing best practice of electrical IPC standards/methodologies with experienced approach to manufacturing and sustaining maintenance of legacy design projects. Complementary support provided by a combination of TTM Management, Field Application Engineering, Electrical/Mechanical Engineering and NPI Manufacturing teams. Duties and Responsibilities: Design Engineering Physical Design • PCB concept sketches for assistance in design layout estimating, • PCB design suggestions/trade-offs regarding initial engineering inputs, • Support changes to existing schematic diagrams using TTM suite of tools: OrCAD and/or DxDesigner \n • Place and route components ensuring that all electrical and physical specifications meet the detailed design requirements for each PCB design. Utilization of Siemens Xpedition/PAD's and/or Cadence Allegro required\n, • Participate in design reviews, interface with electrical, mechanical, manufacturing and process engineers to design proto-type and production printed circuit boards in accordance with TTM standards and quality procedures\n, • Collaborate on assigned projects closely with Si (Signal Integrity) or various engineering disciplines, fellow designers and Program \n\n Leadership \n • Provide layout feedback to design engineers as needed to ensure functionality and manufacturability of PCB designs\n, • Create fabrication and assembly drawings (AutoCAD 2023), parts list & incorporate changes to existing design documentation. Create and maintain component libraries\n\n\n, • Generate all output files (ODB++, Bill of Materials & PCB/CCA documentation) required for the manufacture of the board and assembly\n, • Maintain change (PCN) responsibilities on re-design and documentation updates\n\n Industry and TTM-specific electrical standards and methodologies- \n • Product safety and EMI consideration during eCAD layout (UL, CSA, NEBS, Etc.)\n, • Standardization of electrical components and eCAD libraries utilizing IPC or vendor specific standards\n, • Exceedingly experienced with High-Speed PCB Design Constraints: Differential Pairs, Routing Topologies, Controlled Impedance, Length-matched Traces and Delay Tuning\n, • Demonstrated experience with RF PCB routing complexities. Implement layout rules for RF transmission lines (Micro-strip & Coplanar Waveguide), signal line isolation practices, via fencing & unique RF routing structures\n, • Audio (Analog & Digital separation) PCB best practice layout guidelines highly recommended\n, • Direct design experience related to multi-layer CCA and Flex PCB technologies \n, • Current knowledge of µ-via/HDI layout methodologies and best practices\n, • Understanding of stack-up materials/construction along with impedance modeling requirements\n\n Education and Experience: Education: Minimum Associates in Electrical Design/Drafting or BS in Electronic Technology. Related eCAD training certification/career experience will be considered in lieu of a degreed program with 10 year experience. Experience: Minimum of 10 years' experience with primary hands-on demonstrated proficiency of Siemens PAD's (VX2.8 or later), Siemen's Xpedition (VX2.14 or later) and/or Cadence Allegro/OrCAD (17.4 or later) product experience is required. Comprehensive understanding of electrical and mechanical engineering design practices related to printed circuit board electrical drafting and fabrication drawing creation experience is essential. Necessary familiarities with electrical design utilizing IPC standards, IAW IPC-2221/3 and associated specs is critical. Knowledge and methodology utilizing standard IPC Class III approach to design and manufacturing concerns is also necessary. BS or related degree in engineering or a related discipline \n • Related PCB design for the Aerospace and Defense sectors is preferred.\n, • CID/CID++ Certification for PCB Designers highly recognized as professional validation of design, documentation, and manufacturability skills within the industry.\n, • Solid oral communication and interfacing skills with technical and manufacturing personnel to resolve engineering tasks. Propose alternatives when faced with challenging PCB design situations including resolutions to non-standard problems.\n\n, • Appropriate understanding of vendor component data sheets for creation of schematic library and/or PCB footprints expected.\n #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $101,807 - $179,040 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Position Summary: Operate and set-up CNC and conventional equipment for the manufacture of aerospace products. Duties and Responsibilities: • Set-Up and operate vertical milling machines and/or horizontal milling machines., • Set Up and run conventional milling machine., • Machine detail parts and final assemblies from the engineering drawings and methodsheets using fixtures and drill jogs., • Work to close tolerance (+/- .0005), • Other duties as assigned. Required Qualifications / Education /Experience: • High School degree or GED Certificate, • Minimum 5 years CNC/conventional experience., • First piece inspection, • Ability to read blueprints., • Ability to edit programs and follow instructions, setups, and method sheets. Physical Requirements: • Ability to lift up to 35 lbs. Other: Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder. The Hughes-Treitler Business Unit designs and manufactures state of the art plate-fin heat exchangers, cold plates, condensers, evaporators, and other heat transfer products. We provide custom design and engineering services, to high quality manufacturing standards, for the aircraft, engine and industrial heat exchangers in the mobile/marine/avionics/space and missile markets. Compensation Employee Type: Hourly Salary Minimum: $50,000 Salary Maximum: $80,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

They are looking to hire a talented Controller to manage the general accounting, cost accounting and reporting for the company. They are looking for someone with prior Controller level experience within a manufacturing company, preferably in the defense, aerospace, electronics manufacturing space.

Oerlikon is a global innovation powerhouse for surface engineering, polymer processing and additive manufacturing in key industries such as aerospace, automotive, energy, tooling and textiles.

Job Description Shipping and Receiving Clerk – Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • High School Diploma or GED Certificate and equivalent experience (On the Job Training), • PC with Windows, Oracle or Database experience is required, • Fluency in English Required SUMMARY OF POSITION This role performs a variety of operations connected with the receipt and shipment of products. • Verify, record and deliver all incoming products, • Enter all receipts in oracle, • Unload all delivery trucks (forklift) outgoing shipments and prepare items for shipping., • Compare identifying information and counts, weights or measure item to verify against invoices, orders or other records. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Load and Unload Delivery Trucks, • Receive and deliver all incoming products, • Perform electronic inventory transactions, • Insert items into container, using spacers, fillers, protective passing or using Instapak Foaming Machine., • Bind cartons using tape shooter., • Stamp, stencil or glue identifying information and shipping instructions onto crates or containers., • Post weights, shipping charges and affix postage., • Operate tier-lift truck, forklift truck or use hand truck to move, convey or hoist shipments from packing area to shipping platform., • Bind containers with metal tape, suing strapping machine., • Perform electronic inventory transactions to pull orders to ship., • Navigate to and update customer portals as required daily., • Prepare and type shipping and related documents, such as waybills, express delivery forms and government DD250 forms., • Must have the ability to operate forklifts in a safe manner throughout the facility., • Maintain and organize the work area to assure safe working conditions and support daily visual flow management guidelines., • Perform, as assigned, other similar or related duties. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Ability to use UPS/Fed-Ex transactions terminals, • Precise and effective phone communication skills, • Ability to work with minimal supervision., • Self-Starter, • Ability to learn and apply new skills, • Accuracy important (systems transactions), • Ability to interact with truck vendors PHYSICAL DEMANDS • Prolonged sitting, standing, and core-body movement required, • Ability to safely lift up to 70lbs, team lift over 70lbs required OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $30,000 to $50,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

The Shipping & Receiving Clerk is responsible for managing both incoming and outgoing materials in a highly regulated aerospace and defense manufacturing environment. Working knowledge of shipping and receiving procedures and documentation. Ability to read and interpret purchase orders and shipping

Job DescriptionDescription: The Shipping Clerk is responsible for managing both incoming and outgoing materials in a highly regulated aerospace and defense manufacturing environment. This role ensures all shipments and receipts are accurate, properly documented, and compliant with industry standards and government regulations. The ideal candidate is detail-oriented, organized, and experienced in handling-controlled materials with strict traceability requirements for an outgoing individual that will keep track of Shipments and receipt of materials and products. Requirements: Shipping Functions: • Prepare, package, and process outbound shipments in accordance with customer and regulatory requirements., • Generate shipping documentation including packing lists, bills of lading, certificates of conformance, and export paperwork., • Verify outgoing shipments against work orders and customer specifications., • Coordinate with carriers for pickups, including domestic and international shipments., • Receive and verify incoming materials against purchase orders and packing slips., • Check for damage, accuracy, and proper documentation upon receipt., • Accurately enter receipts into ERP/MRP systems and route materials to appropriate departments., • Maintain traceability of materials, including lot and serial number tracking., • Maintain accurate records of all shipping and receiving transactions., • Ensure compliance with AS9100 and internal quality procedures., • Maintain clean, organized, and safe shipping/receiving areas., • Communicate discrepancies or delays to internal stakeholders promptly., • Ability to follow detailed written and verbal instructions in English. Qualifications Education & Experience: • High school diploma or equivalent required., • Working knowledge of shipping and receiving procedures and documentation., • Familiarity with ERP/MRP systems and warehouse software., • Understanding of export control regulations (ITAR/EAR) preferred., • Strong attention to detail and organizational skills., • Ability to read and interpret purchase orders and shipping documentation., • Effective communication and teamwork skills., • Ability to manage multiple tasks in a fast-paced environment. Physical Requirements • Ability to lift up to 50 lbs., • Frequent standing, walking, bending, and material handling., • Manufacturing and warehouse setting., • Exposure to noise, moving equipment, and varying temperatures. Preferred Qualifications • Experience in an AS9100-certified environment., • Forklift certification., • Experience handling hazardous materials.

Job DescriptionController Farmingdale, NY Our client is a mid-sized, successful and well-established manufacturing company. They are looking to hire a talented Controller to manage the general accounting, cost accounting and reporting for the company. They are looking for someone with prior Controller level experience within a manufacturing company, preferably in the defense, aerospace, electronics manufacturing space. This role requires working fully onsite and offering a salary in the range of $180,000 - $200,000. In addition, they offer a strong benefits package inclusive of health insurance, 401k with match, tuition assistance and a generous PTO program. Responsibilities of the position include: · You will manage day-to-day accounting for the company · Oversee a team of three · Evaluate current processes, offer improvement ideas · Heavy involvement in month-end close, workpapers, etc. · Assist outside auditors with year-end audits Qualifications: · Bachelor's degree in Accounting · 15+ years of accounting experience required, CPA license is a plus · Experience in the aerospace, defense and/or electronics manufacturing field a must · 5+ years of management experience required · Strong systems skills · Top notch organizational skills and the ability to collaborate across the company · Strong communication skills and ability to work well with company executives If you would like to be considered for this opportunity or any other position posted by LHH, please email your resume to Erik.Hansen@ lhh.com or you can visit our web site at . Pay Details: $180,000.00 to $200,000.00 per year Search managed by: Erik Hansen Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description For more than 80years, Pioneer, a HEICO company, has thrived by serving niche segments of the defense industry by providing distribution and support services. Pioneer high energy culture focuses our Team Members' on providing the highest quality of service. Our leadership approach creates a dynamic environment that continually challenges our Team Members to perform at their best. Pioneer offers competitive compensation, paid vacation and holidays, an excellent 401K plan with company match, and medical, dental, life, and disability insurance. The Business Data Analyst / Account Executive in a combination of a customer services capacity to the company’s most valuable accounts and analysis of micro and macro trends. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Identify and capture orders for Pioneer and the company’s top vendors., • Provide quotes in accordance with Pioneer’s guidelines., • Understand the supplier’s evolving objectives and Pioneer’s role to satisfy them., • Understand and speak to the significance and value of Pioneer’s support functions., • Be an expert in Pioneer’s market segment., • Have a clear understanding of vendor products and applications., • Understand growth market segments and products Pioneer to maintain success., • Anticipate changes in the vendor relationships as well as threats from the industry and competitors., • Travel to tradeshows and vendor sites., • Articulate (verbal and in writing) sales and customer service communications internally and externally., • Work onsite effectively as part of the Pioneer team., • Proven experience in a business development capacity., • Drive and energy to manage multiple accounts while looking for new opportunities., • Excellent written and verbal communication skills., • Strong Excel and data analysis., • Project management., • Creative problem-solving skills., • Strong interpersonal skills., • Ability to handle multiple tasks simultaneously and prioritize.Company DescriptionPioneer is a market leader with with nearly 80 years of history and consistent growth. We specialize in providing tailored lifecycle sales and distribution solutions to manufacturing companies serving the military market to support our warfighters around the globe. Pioneer is part of a publicly traded business in the Aerospace & Defense industry with extensive resources.Pioneer is a market leader with with nearly 80 years of history and consistent growth. We specialize in providing tailored lifecycle sales and distribution solutions to manufacturing companies serving the military market to support our warfighters around the globe. Pioneer is part of a publicly traded business in the Aerospace & Defense industry with extensive resources.

Job Description Lead Design Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 8+ years of progressive engineering experience SUMMARY OF POSITION The Lead Design Engineer is responsible for overseeing the design and development of complex mechanical parts and assemblies. This role focuses on leading technical decision-making, ensuring design integrity, and driving innovation across projects. The Lead Design Engineer will play a key role in cross-functional collaboration, mentoring, and continuous improvement initiatives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Lead the development of 3D models of complex aerospace hardware, • Prepare design concepts, sketches, layouts, technical drawings, and BOMs, • Serve as the primary technical point of contact for design-related decisions across new and existing products, • Interface with internal and external stakeholders to ensure manufacturability, • Certify technical reviews and other engineering documentation, • Lead cross-functional activities to sustain existing designs, • Manage complete implementation of engineering design change requests, • Lead resolution of technical issues during manufacturing and customer interactions, • Champion process improvement activities related to design engineering, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience as a Senior Mechanical Design Engineer, Technical Lead, or similar role, • Expertise in parametric CAD design, • Expertise in drawing ANSI standards and GD&T procedures, • Expertise in manufacturing techniques and processes, • Knowledge of material properties and selection process, • Knowledge of FMEAs and quality assurance processes, • Knowledge of relevant MIL-STD’s, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $160,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Manufacturing Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in Industrial Engineering, • 3-5 years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Due to ITAR Restrictions, an export license may be required. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $85,000 to $105,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Senior Structural Engineer - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • Master’s degree preferred, • 5+ years of experience in a similar role SUMMARY OF POSITION The Senior Structural Engineer is responsible for leading intricate analyses to ensure our products will meet customer requirements. This role requires rigorous application of structural mechanics while adhering to manufacturing, testing, and quality best practices. The Senior Structural Engineer will engage in problem-solving daily and regularly present results to internal and external stakeholders. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform critical thermomechanical analyses of complex aerospace hardware through commercial analysis packages and hand calculations, working closely with the design team to rapidly iterate on new product development, • Peer review analyses produced by other structures engineers and subcontractors, • Liaise with customer on heat exchanger requirements, • Generate technical reviews, reports, and other engineering documentation, • Champion process improvement activities related to structural analysis, • Review and approve design changes and test procedures, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests, • Support proposals and future product development QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Extensive experience performing structural analysis for mechanical components (aerospace preferred), • Expertise in commercial FEA software packages, • Expertise in material properties and selection process, • Knowledge of design principles, manufacturing processes, and assembly techniques, • Knowledge of 3D modeling and CAD software, • Knowledge of heat and mass transfer, fluid mechanics, and thermodynamics, • Knowledge of drawing ANSI standards and GD&T procedures, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $105,000 to $150,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionQuality Engineer Location: New Hyde Park, NY - Full time on site Reports To: Quality Manager Salary: 85k-100k Benefits: Medical Benefits fully covered for both single and family, 401k with a match, company funded pension plan Position Overview We are seeking an experienced Quality Engineer to support the development, implementation, and continuous improvement of our Quality Management System (QMS). This role is key to ensuring the organization meets the highest standards of product quality, regulatory compliance, and customer satisfaction. The ideal candidate brings 4+ years of quality engineering experience, preferably within the aerospace or defense manufacturing sector, and is comfortable working in a fast-paced, highly regulated environment. Key Responsibilities • Support the implementation, maintenance, and ongoing improvement of the AS9100D / AS9120B Quality Management System., • Conduct and review AS9102 First Article Inspections (FAIs) in accordance with customer and industry requirements., • Plan and execute internal and external audits related to QMS, product quality, and process compliance., • Monitor supplier performance and lead root cause and corrective action activities (RCCA)., • Collaborate closely with customers to ensure all product, documentation, and contractual requirements are understood and met., • Develop, maintain, and analyze quality metrics, KPIs, and statistical data to identify trends and drive continuous improvement., • Manage document control, including revisions, updates, and regulatory record retention., • Oversee equipment calibration schedules and maintain associated records and certification files., • Serve as a quality liaison during customer visits, audits, and third-party assessments., • Support internal stakeholders through troubleshooting, training, and guidance on quality-related processes., • Assist with special projects, process optimization, and quality-related initiatives as assigned.Required Skills & Competencies, • Ability to interpret customer purchase orders, contracts, engineering drawings, specifications, and change notices., • Working knowledge of ISO 9001, AS9100, AS9120, and related aerospace quality system standards., • Hands-on experience with First Article Inspections (AS9102)., • Proficiency with MS Office, basic measurement tools, and familiarity with ERP/MRP systems (AS400 experience a plus)., • Strong understanding of continuous improvement methodologies (Lean, Kaizen, etc.)., • High attention to detail with strong organizational, documentation, and problem-solving skills., • Ability to work both independently and collaboratively across departments., • Strong communication skills, with the ability to present findings and interact effectively with auditors, customers, and internal teams., • Ability to manage multiple projects simultaneously and meet deadlines.Qualifications, • Bachelor's degree in Engineering, Quality, or related technical discipline OR 4+ years of quality experience in a regulated manufacturing environment (aerospace strongly preferred)., • U.S. citizenship or legal residency required., • Experience supporting quality programs within aerospace or defense supply chains is highly desirable., • Professional certifications such as CQE, CQA, RCCA, AS13001, AS9117, or auditing credentials are a plus.APPLY TODAY - Great Opportunity!!! If you are interested in this job and meet the qualifications, please apply today by attaching your resume here and you will be contacted this week to discuss the job further! Pay Details: $85,000.00 to $100,000.00 per year Search managed by: Cara Kelly Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Location: Farmingdale, NY Company: Superior Motion Controls Position Summary: Superior Motion Controls is seeking individuals who want to join our precision-driven manufacturing team as CNC Operator and Machinist-in-Training. This opportunity is ideal for a motivated individual who thrives in a fast-paced, quality-focused environment and brings a keen desire to contribute immediately while learning critical skills that will lead to excellent pay and career advancement in a industry critical to America’s defense and aerospace capability 40+ hours per week Primary Responsibilities: • Work closely with experienced Set up Machinists and operate various CNC machining centers to produce precision components per engineering specifications and drawings., • On the job training to enhance skills for reading and interpret complex blueprints, GD&T specifications, and setup sheets., • Learn to perform in-process inspections and finished parts inspections., • Learn to select appropriate tools, fixtures, speeds, and feeds to optimize productivity and part quality., • Learn and execute routine maintenance and troubleshooting of equipment to ensure optimal machine performance., • Maintain documentation and records for production runs, tool usage, and machine setup parameters., • Collaborate with engineering, quality assurance, and production teams to improve machining processes and resolve technical challenges. Qualifications and Experience: • Minimum 2 years of recent hands-on experience in a CNC machining environment, with demonstrated experience in operating., • Experience in the use of precision measurement instruments including micrometers, calipers, height gauges, and dial indicators., • Understanding of material properties (e.g., aluminum, stainless steel, tool steel) and cutting tool technology., • Ability to work independently with minimal oversight while consistently delivering high-quality results., • Ability to stand at a machining workstation for extended periods., • Capability to lift up to 40 lbs as needed., • Must be physically able to navigate the warehouse and access inventory at various heights.

Job Description CNC Operator - 1st Shift – Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • High School degree or GED Certificate, • Minimum 5 years CNC/conventional experience. SUMMARY OF POSITION Operate and set-up CNC and conventional equipment for the manufacture of aerospace products. ESSENTIAL DUTIES AND RESPONSIBILITIES • The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time., • Set-Up and operate vertical milling machines and/or horizontal milling machines., • Set Up and run conventional milling machine., • Machine detail parts and final assemblies from the engineering drawings and methodsheets using fixtures and drill jogs., • Work to close tolerance (+/- .0005), • Other duties as assigned. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • First piece inspection, • Ability to read blueprints., • Ability to edit programs and follow instructions, setups, and method sheets. PHYSICAL DEMANDS • Ability to lift up to 35 lbs. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $50,000 to $80,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionManufacturing Engineer Compensation for this role: 85-125k/ year based on experience The Manufacturing Engineer will lead the machining and assembly methodization of new aircraft hydraulic products supporting multiple business unit applications. This role provides technical support and direction to Operations for new business programs and legacy sustaining efforts, while coordinating closely with Design and Quality Engineering. The position also supports productivity, cost, quality, and efficiency objectives across manufacturing operations. Key Responsibilities • Develop, evaluate, and improve manufacturing methods using knowledge of product design, materials, fabrication processes, tooling, production equipment capabilities, assembly methods, and quality control standards., • Generate manufacturing and assembly documentation, and provide hands-on support to personnel during day-to-day manufacturing, inspection, and testing operations., • Design, develop, and implement manufacturing tools and fixtures to support production requirements., • Analyze engineering design releases and assess impacts to operations, including inventory, work-in-process, and outsourced work; develop and execute appropriate action plans., • Drive continuous improvement initiatives focused on cost reduction, quality improvement, and manufacturing efficiency., • Resolve method-related issues by collaborating with Design Engineering, Quality Engineering, Planning, Supervisors, and Operations staff., • Develop machining strategies and assist in the creation of CNC milling and turning programs., • Bachelor of Science in Mechanical, Industrial, Systems, Aerospace, or Manufacturing Engineering., • 3–5 years of experience in a manufacturing or machining-focused engineering role., • Proficiency with CAD software for the design and drafting of manufacturing tools and fixtures., • Experience with CAM software for generating CNC programs., • Working knowledge of lean manufacturing principles and production techniques., • Proficiency in Microsoft Office tools (Word, Excel, PowerPoint)., • ERP system experience preferred., • Must be authorized to work in the United States. This role operates in a manufacturing environment and may involve: • Exposure to high noise levels from operating machinery., • Exposure to fumes, dust, and mists associated with machining operations. Core Benefits Competitive Wages: Employees receive steady and reliable pay. Comprehensive Health Care Package: Includes medical coverage, though specific details (e.g., dental, vision) are not listed publicly. Paid Holidays & Vacations: Time off for holidays and vacation is part of the standard package1. Workplace Environment Safe & Diverse Workplace: Emphasis on safety and inclusion. Family-Oriented Culture: Employees report a supportive environment that values family and personal needs1. Professional Development Internal & External Training: Opportunities for skill development and career advancement. Promotion from Within: Encouragement of internal mobility and growth1. Workplace Type This is a fully onsite position in Westbury,NY. Application Deadline This position is anticipated to close on Apr 11, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Director, Human Resources - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree with a minimum of 6+ years HR experience in the manufacturing industry; master’s degree with 10+ years HR experience preferred, • Minimum of 4+ years of experience in Labor Relations SUMMARY OF POSITION The Director of Human Resources is an essential member of the HTF leadership team contributing to the development and execution of the business’s annual strategic plan. This position is a senior staff level role at our client’s Business Unit, and the individual will play a key role in guiding the strategic direction and leading the efficient execution of activities to profitably grow the business. This position reports directly to the HTF DVP/Business Unit Manager, with a strong dotted line to the Aerospace & Defense Division Vice President of Human Resources. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Serve as a key member of the Senior Leadership Team (SLT) for the Business Unit and the trusted advisor and business partner of the DVP BU Manager, • Lead the HTF HR team in full cycle HR responsibilities (hiring, onboarding, development, performance management, employee relations, payroll, etc.), • Collaborate with the BU Manager and SLT to assess leadership capabilities, implement targeted development strategies, and drive initiatives that align with HTF values and accelerate business performance, • Full ownership of Labor Relations for the Hughes-Treitler Garden City location including CBA administration, grievance and arbitration management, and participation in contract negotiations, • Serve as the key coach to all leaders within the business unit managers on HR Strategy, policy and leadership principles; recommend organizational structure, improvements to policies, programs, and procedures related to the effectiveness of the HR function, • Leverage HR KPIs and metrics to make data-driven business decisions, • Travel required up to 40% to the Business Unit locations QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Experience driving transformative change within a manufacturing business; ability to partner with and effectively influence Senior Business Leaders, • Robust understanding of manufacturing technical talent and operation speed, • Expertise in leading talent acquisition initiatives and aligning hiring strategies with business objectives, • Knowledge of Federal, State, and Local employment regulations, • Working knowledge of a manufacturing P a practical working knowledge of manufacturing concepts (Throughput, Direct Labor Planning, etc.), • Must have the ability to multitask with strong time/priority management skills, • Due to the nature of HTF's programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $185,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Superior Motion Controls designs, produces and delivers precision components and assemblies for defense and aerospace systems. We are seeking a highly experienced and hands-on Process and Quality Manager to oversee all aspects of our Quality Program including design and development, precision machining, assembly and test of electromechanical assemblies. This role is responsible for supervising and scheduling internal inspection personnel and interfacing with engineering and production management to ensure all work products (WIP and final components) meet requirements. The Process and Quality Manager will serve as the principal adviser to executive management on elements of the company’s Quality Management System and directly lead the company’s efforts to maintain all required certifications with respect to external standards (ISO9001:2015, AS9100, etc.). Key Responsibilities ▪ Oversee all aspects of the company’s Quality Program and the Inspection Department. ▪ Supervise and schedule the activities of all company quality inspectors ▪ Recruit and train Quality Inspectors to ensure adequate staffing to meet demand ▪ Achieve and maintain proficiency as a Quality Inspector ▪ Ensure all inspection tools and systems are calibrated on schedule as required and maintain appropriate documentation. ▪ Lead the Company through all required external quality audits (Standards based such as ISO 9001, AS9100 as well as any customer required) Requirements Qualifications ▪ Minimum 10 years experience in quality control, with at least 5 years in a leadership or management capacity; preferably in a precision machining/manufacturing environment ▪ Ability to read and interpret complex engineering drawings and GD&T ▪ Strong skills in coaching and developing inspectors with a range of experience levels ▪ Familiarity with lean manufacturing principles, ERP systems, and performance metrics ▪ Effective communicator with strong collaboration skills across departments

Job Description ✨ Engineering Test Technician – Launch Your Career in Aerospace! ✨ Are you passionate about electronics, love solving complex problems, and want to work hands‑on with cutting‑edge aerospace technology? Join our team as an Engineering Test Technician and take your career to new heights—literally. In this role, you’ll be at the heart of aerospace innovation, performing component‑level troubleshooting, electrical testing, and repair on advanced equipment that supports aircraft such as Boeing, Airbus, and Apache Helicopters. If you're a graduate with strong electronics training or a technician eager to grow, this is your opportunity to step into a high‑impact role. 🔧 What You’ll Do • Perform component‑level troubleshooting and repair of electrical components., • Conduct military‑grade electronics testing using oscilloscopes, multimeters, power supplies, and more., • Troubleshoot and support temperature control and deicing systems used in major aircraft platforms., • Read and interpret electrical schematics and technical documentation., • Document test findings, complete accurate data sheets, and write up non‑conformances., • Work hands‑on in a fast‑paced, collaborative engineering environment., • Dedicate 50–75% of your workday to testing and troubleshooting activities.✅ What You Bring, • 3+ years of Electrical Technician experience in aerospace or a military environment, • OR, • A graduate with formal military electronics training or an associate/technology degree in electrical engineering who is ready to dive in and learn quickly., • Proficiency with standard test equipment:, • • Oscilloscopes, • • Digital multimeters, • • Power supplies, • Strong understanding of electrical circuits, testing fundamentals, and safety protocols., • Ability to read schematics, blueprints, and technical diagrams., • Strong communication skills for documenting test results, data sheets, and non‑conformances., • Must be able to work a full‑time, 40‑hour workweek.⭐ Preferred Qualifications, • BSEE or equivalent engineering degree., • Previous experience working with aerospace electronic systems, temperature controls, or deicing units. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionDescription: Aerospace Tool Designer Join our innovative aerospace engineering team as an Aerospace Tool Designer, where you will play a vital role in designing and developing essential tools that support the manufacturing and assembly of aircraft structural components. This position offers an exciting opportunity to contribute to the creation of high-precision tooling solutions that ensure quality and efficiency in aerospace production. Key Responsibilities: • Design, develop, and refine tools, jigs, fixtures, molds, and gauges used in aircraft manufacturing processes., • Support the entire tooling lifecycle, from initial concept and design reviews to procurement, production implementation, and documentation., • Collaborate with cross-functional teams to ensure tooling designs meet engineering specifications, safety standards, and production requirements., • Conduct design reviews and modify tooling based on feedback and testing results., • Maintain accurate documentation and configuration control for all tooling designs and revisions., • Assist in troubleshooting tooling issues during production and implement improvements as needed. Skills and Qualifications: • Strong understanding of manufacturing processes, materials, and aerospace standards in English., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment and communicate effectively., • Knowledge of quality control and documentation procedures related to tooling. We foster a collaborative and innovative work environment that values continuous improvement and professional growth. Our company offers competitive benefits and opportunities to advance your career in the dynamic aerospace industry. Requirements: Key Responsibilities Tool Design & Modeling • Develop detailed 3D models and 2D drawings for a wide range of aerospace tooling, including assembly jigs, fixtures, molds, and gauges., • Design tooling solutions that support complex manufacturing and assembly challenges from concept through production., • Utilize CAD software such as Siemens NX, CATIA V5, and/or SolidWorks to create, modify, and maintain tooling designs., • Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accuracy, repeatability, and manufacturability., • Apply basic structural analysis principles and conduct research to validate tooling concepts and designs., • Ensure tooling meets quality, safety, ergonomic, and regulatory requirements., • Incorporate Design for Manufacturability (DFM) principles to ensure tools can be produced efficiently and cost-effectively., • Manage the complete tooling design lifecycle, from concept development through release to production., • Participate in and lead design reviews; provide constructive feedback to peers and stakeholders., • Develop tooling usage instructions, maintenance plans, and evaluation criteria, including calibration and load-testing requirements., • Support methodization and standardization of tooling and processes to improve product quality and reduce manufacturing cycle times., • Collaboration & Communication, • Work closely with cross-functional teams including Engineering, Manufacturing, Operations, and Quality., • Communicate effectively with internal stakeholders and external vendors to ensure tooling requirements, schedules, and deliverables are met., • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Aeronautical Engineering, or a related field, with a minimum of four (4) years of aircraft tooling design experience., • In lieu of a degree, a minimum of eight (8) years of directly related aircraft tooling design experience., • This position requires the use of approved safety footwear (ASTM F-2413 complaint) when accessing or working in production and workshop areas. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job Description Director, Manufacturing Engineering – Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years experience in a manufacturing environment, including managing salaried and hourly staffs., • Minimum 5 years using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. SUMMARY OF POSITION The Director, Manufacturing Engineering (ME Director) is responsible for supporting business goals including product cost and quality, schedule adherence and delivery on-time to customer demand. It is a hands-on position that is responsible for ensuring the manufacturing processes, tooling, equipment support the Safety, Quality, Delivery and Productivity goals of the business. This ME Director plays an integral part in plant operations, special projects, OPEX, and is responsible for developing and maintaining motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. SUPERVISORY RESPONSIBILITIES The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • The Manufacturing Engineering team is responsible for developing the standard processes used to manufacture heat exchangers including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible to ensure all production processes are defined using the standard work formats and templates as well as to create any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Design and develop any tooling or fixtures needed to support the production processes., • Support the Operations team in the achievement of KPI’s related to shipping volume targets, on-time delivery, past due backlog, customer lead time, efficiency, utilization, and overtime premium expense., • Support and drive continuous improvements in manufacturing metrics including quality, yields, cycle time, productivity, and cost. Promote process improvement, and LEAN manufacturing methodologies and 5S processes., • Implement and drive continuous improvement activities through implementation of change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements / quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment, tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for entire department., • Provide oversight for manufacturing activities in the Reynosa Mexico facility., • Minimal travel expected. Potential travel to facility in Reynosa, Mexico in support of overall business objectives. UALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical along with longer term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems; preferably Oracle., • Proficient in Microsoft Office programs to include Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills., • Familiarity with assembly, welding, brazing, machining, and testing processes is desired., • Demonstrated knowledge of and familiarity with a variety of lean tools and methodologies including, but not limited to:, • VSM, Standard Work, Pull Systems & Kanban, Integrated Business Planning, Daily Management, 5S/Visual, • Management, 3P, SMED, TPM, Variation Reduction and Six Sigma. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $175,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Test Engineer/Hardware Requirements - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree or higher in Mechanical or Aerospace Engineering or a related field, • 2+ years of experience in a similar or related role SUMMARY OF POSITION The Test Engineer is responsible for developing and executing tests to ensure that product quality and reliability meet customer requirements. This role involves collaborating with cross-functional teams to identify testing needs, create test procedures, and analyze results. The Test Engineer will also engage in troubleshooting and problem-solving to ensure product performance. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Prepare and review acceptance and qualification test procedures and corresponding reports for complex aerospace hardware, • Oversee and execute hardware testing, • Analyze test results and ensure compliance with customer requirements, • Install and troubleshoot testing equipment, • Travel as needed to test labs to support testing, • Improve data acquisition system software and hardware, • Assist in the maintenance of test lab equipment, • Maintain database of instrumentation used in the test department, • Research new instrumentation and testing methodologies, • Review calibration of test instruments to verify compliance with quality assurance and customer requirements, • Support disposition of technical issues which occur during manufacturing, • Support customer reviews and inbound requests QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Strong understanding of testing methodologies and best practices, • Expertise in instrumentation and data acquisition, • Knowledge of analog and digital test equipment, • Knowledge of data acquisition software such as LabVIEW, • Knowledge of data processing techniques, Excel preferred, • Knowledge of relevant MIL-STD’s, • Familiarity with 3D modeling and CAD software, • Familiarity with heat and mass transfer, fluid mechanics, thermodynamics, and structural mechanics, • Highly motivated self-starter, • Strong problem-solving skills, • Excellent attention to detail, • Strong verbal and written communication skills, • Capable of thriving in a fast-paced environment PHYSICAL DEMANDS • Ability to work for prolonged periods on a computer or in a lab environment, • Ability to move equipment up to 25 pounds OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $80,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionElectrical Engineer Location: Long Island, NY Type: Full-Time | Onsite Compensation: $100,000 - $130,000 base, depending on experience + benefits Overview We're partnered with a well-established manufacturing organization on Long Island seeking an Electrical Engineer to support the design, development, and sustainment of electrical systems used in highly regulated products. This role offers meaningful technical ownership and the opportunity to grow into a senior?level engineering position over time. Key Responsibilities • Design and develop electrical schematics, wiring diagrams, and system layouts for electromechanical products, • Support product development from concept through production, including prototyping, testing, and validation, • Work closely with manufacturing to support builds, troubleshooting, and continuous improvement efforts, • Create and maintain engineering documentation, including BOMs, ECNs, test procedures, and work instructions, • Ensure designs comply with industry standards and regulatory requirements, • Assist with root cause analysis and corrective actions related to electrical issues, • Collaborate cross-functionally with mechanical engineering, quality, and supply chain teamsQualifications, • Bachelor's degree in Electrical Engineering or a related discipline, • 2-6+ years of experience in an electrical engineering role within a manufacturing environment, • Experience with electrical schematics, wiring, and system?level design, • Familiarity with low?voltage and/or power distribution systems, • Comfortable supporting hands-on manufacturing and production activities, • Strong documentation, communication, and problem?solving skillsNice to Have, • Experience with electromechanical systems, • Exposure to regulated industries (aerospace, defense, medical device, or similar), • Experience with testing, validation, or qualification activities, • Interest in growing technical ownership and mentoring junior engineers over timeWhy This Role, • Competitive compensation ($100K-$130K base) with flexibility based on experience, • Clear opportunity to expand scope and progress into a senior?level role, • Hands-on engineering work with visible impact on real products, • Stable, long-term opportunity with a reputable Long Island manufacturerPay Details: $100,000.00 to $130,000.00 per year Search managed by: Andrew Khanija Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description 5Quality Inspector - Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • High school graduate, • 3-5 Years mechanical inspection, aerospace experience, • Post high school education in math, engineering, inspection techniques or related fields a plus SUMMARY OF POSITION Responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Good communication skills, able to read and follow the Client’s work instructions and quality procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions, • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment, • Prepare and maintain inspection reports, • Program and/or operate Coordinate Measuring Machine, • Perform Hardness testing, • Collect and tabulate data for SPC use, • Review Supplier F.A.I.R./Generate First Article Reports per AS9102, • Other duties as directed by the management QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Basic computer knowledge including MS Excel and Word, • Interpret drawing requirements/specs and geometric dimensions and tolerances, • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards, • PCDMIS programming skills, • Familiar with special process specifications for heat treat, welding, and non-destructive testing EQUIPMENT USED • Vernier calipers, • Micrometers, • Height Gauges, • CMM machines, • Other standard measuring tools/instruments, • Please note, all Production Floor employees are required to wear steel toe boots. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $55,000 to $75,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking an Inspector for our client in the Electronic Instruments and Electromechanical Manufacturing domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Contract position, and the client is looking for someone to start immediately. Duration: 6+ Months Contract Location: Garden City, NY Salary: $26.00-$31.00/Hourly Role: Inspector Primary Skills: Engineering Role Description: The Inspector must have 5+ years of experience. In this role, you will be responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Must have good communication skills, able to read and follow client work instructions and quality procedures. Duties and Responsibilities: • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions., • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment., • Prepare and maintain inspection reports., • Program and/or operate Coordinate Measuring Machine., • Perform Hardness testing., • Collect and tabulate data for SPC use., • Review Supplier F.A.I.R./Generate First Article Reports per AS9102., • Other duties as directed by the management. Required Skills and Abilities: • Basic computer knowledge including MS Excel and Word., • Interpret drawing requirements/specs and geometric dimensions and tolerances., • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards., • PCDMIS programming skills., • Familiar with special process specifications for heat treatment, welding, and non-destructive testing. Education and Experience: • High school graduate., • 3-5 Years of mechanical inspection, aerospace experience., • Post high school education in math, engineering, inspection techniques or related fields a plus. Equipment Used: • Vernier calipers., • Micrometers., • Height Gauges., • CMM machines., • Other standard measuring tools/instruments. Education: High School graduate/Bachelor’s degree Experience: Minimum 5+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Veena Grover Recruiter Phone: 412-525-7995 Benefits: We have various coverages and additional benefits to choose from: • Medical, Dental (Including Ortho) & Vision Insurance (Option to Enroll)., • Paid Leaves (Wherever applicable)., • Life & Disability Coverage (Upon eligibility)., • 401K Option, Education Assistance Program and more. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description We are seeking a highly motivated and experienced Project Manager to join our team! NorcaTec is a dynamic and growing company in the Aerospace distribution and spares sales industry, supporting customers in the US and around the world. This role requires excellent project management skills, with the ability to work collaboratively with cross-functional teams. The ideal candidate will be responsible for end-to-end customer quote and order management, acting as the main point of contact for customers and vendors. Title: Project Manager Reporting to: Vice President, Aerospace Programs Role: The Project Manager is responsible for providing total program support through the sales life cycle. The candidate will be required to manage multiple customer projects for a wide range of international aerospace customers. You will be required to use our ERP software and other MS office tools to facilitate the input and output of information, providing real time information to internal and external stakeholders. Core activities include but are not limited to; Sales Project Management: · Answering customer inquiries related to spares support and repair capabilities. · Conduct material souring utilizing our proprietary vendor and supply networks, as well as sound sourcing tactics and strategies. · Analyzing cost and pricing, offering competitive and best possible solutions to the customer · Manage customer orders/delivery schedules, adhering to internal forecasting guidelines and customer deadlines. · Coordinate with internal teams (quality, production, logistics) to ensure project milestones are met and customer requirements are fulfilled. · Monitor project progress and adjust as necessary to ensure successful completion. Customer Relationship Management: · Serve as the primary point of contact for customers, addressing their needs and concerns throughout the sales process. · Build and maintain strong relationships with key customers and vendors to ensure customer satisfaction and repeat business. · Conduct regular meetings with customers to provide project updates and gather feedback. Sales Strategy and Support: · Collaborate with the sales team to develop and implement effective sales strategies. · Prepare sales proposals, contract reviews, and presentations. · Identify new business opportunities and work with the sales team to pursue them. Risk Management: · Identify potential quote/order risks and develop mitigation strategies. · Monitor and manage project risks to minimize impact on project timelines and deliverables. Quality Assurance: · Ensure that all aerospace products and services meet industry standards and customer specifications. · Adhere to all quality control processes while following all relevant QMS (Quality Management System) procedures and work instructions. Qualifications: · Project management experience in aerospace or manufacturing · customer order management in aerospace MRO or spares distribution · MS office suite proficient, advanced Excel proficiency level desired · Focused, motivated and organized individual · Ability to handle multiple projects and deadlines and work independently · Detail oriented with great communications skills

Job Description FP& A Analyst – Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in Accounting or Finance, • Professional Certifications: CPA or Master’s degree preferred, • Experience: Minimum 5+ years financial reporting, budgeting, forecasting, and accounting, preferably within a manufacturing environment; thorough knowledge of business finance, financial analysis and modeling; 3-5 years of leadership / management experience; public company experience preferred; M&A experience preferred SUMMARY OF POSITION The FP&A Analyst conducts analyses and provides financial insights that support optimal business decision making across the business unit. Reporting to the DVP Business Unit Controller, he/she provides financial consulting and strategic support to senior management, including financial presentations, capital expenditure analyses, assessments of new business opportunities, acquisition analyses, and other projects as requested. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Coordinate the consolidation and reporting of business unit financial performance. Review consolidated financial information provided by Business Units for accuracy; identify and analyze significant variances to budget, forecast, and prior year. Communicate reported information to the Business Unit Manager and Business Unit Controller., • Analyze trend data in key performance indicators including Revenue, cost of sales, gross profit margin, expenses and working capital. Communicate findings and areas for improvement to senior management across the business unit., • Assist in quarterly SOX control test procedures as assigned; ensure SOX requirements are met at the Business Unit level., • Provide support to facilities with closings, forecasting, reporting, and analysis as needed, • Oversee and manage continued development of modeling tools for budgeting, financial forecasting, operational planning using best practices, • Implement and work with business intelligence tools and dashboard reports., • Prepare evaluations and financial data for capital investments and business improvement projects in accordance with Corporate guidelines, • Oversee the planning and coordination of the consolidated annual budget process for the business unit in accordance with Corporate guidelines., • Assist in the preparation of presentations to the Division and Executive Office QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Compliance: Understanding of US GAAP and SOX 404 requirements, • Applications: Proficient with MS Office Suite, notably Excel (including pivot tables) and PowerPoint; working knowledge of ERP platforms (SAP, Oracle, Business Central); proficient with financial consolidation reporting tools (HFM) and data analytics tools (Power BI), • Skills: Excellent communication across all levels of the organization (Business Units, Division, Corporate); ability to present confidently to Executive and/or Senior Divisional Leadership Team; ability to meet strict deadlines and work independently. TRAVEL • 10%-20%; business unit site visits, operational reviews, etc. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $130,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Landscape And/Or Irrigation Installer.We are looking for experienced landscape and/or irrigation installers who are looking for a change to join our landscape lighting team.The work is outdoors so you can still enjoy working outside and utilizing your skills while taking on a lighter task of install

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Misa Plumbing, a Power-Flo Technologies company, is seeking an experienced Plumbing Project Manager to lead the team.Misa Plumbing is a service and repair company licensed in NYC.Plumbing Project Manager Responsibilities.Manages project execution to ensure adherence to budget, schedule, and scope.Ma

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

Project Manager – Manufacturing. Proven project management experience specifically within a manufacturing or "engineered-to-order" environment.

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t