Aerospace manufacturing jobs in Levittown, New YorkCreate job alerts

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description iRocket is developing reusable, fully autonomous small launch vehicles to deliver more frequent, lower-cost access to space. We work across propulsion, structures, integration, and test domains, building toward an era of responsive launch systems. The Role: We are seeking a Manufacturing Technician to support the fabrication, assembly, and integration of structural and mechanical subassemblies for our rocket hardware. You’ll work closely with manufacturing and quality engineers to build reliable flight hardware in line with strict aerospace standards. • Manufacture and assemble flight hardware using methods such as drilling, fastening, bonding, and other mechanical processes, • Use precision calibrated tools (e.g. torque wrenches, micrometers, calipers), • Read and interpret technical drawings, blueprints, and work instructions, • Follow procedures, specifications, and test instructions to ensure hardware is built to design requirements, • Collaborate with manufacturing engineers and quality personnel to develop, refine, and document work instructions, • Ensure production tasks are completed on schedule, safely, and to the required quality, • High school diploma, GED, or equivalent work experience, • Strong communication and collaboration skills, • Ability to interact effectively (verbal and written) with engineering, production, and quality teams, • Experience in New Product Introduction (NPI) or development environments, • Precision drilling experience (tolerance ~ ±0.001 in), • Experience in aerospace, aviation, military, medical device, or other high-reliability industries, • Ability to read and interpret advanced technical drawings, manuals, and reports, • Proficient use of precision measuring instruments, • Experience working in cleanroom or controlled environments, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description An established and leading Precision Timing & Frequency Technology Firm are looking for a Hi-Rel PC Assembler/Solder The Hi-Rel Solder Assembler will join their manufacturing team. The right candidate will have 2-3 year's experience. Responsibilities: • Perform precision hand soldering of surface-mount and through-hole components to IPC Class 3 standards., • Responsible for assembling and soldering high-reliability printed circuit boards (PCBs) and sub assemblies in accordance with industry standards such as IPC J-STD-001, IPC-A-610., • The candidate should have working knowledge of Operating soldering equipment, microscopes, and other assembly tools., • Must be able to read and interpret assembly documents and engineering drawings. Education and Required Skills • High School diploma or equivalent and 2+ years in PCB or electronics assembly, preferably in a Hi-Rel or relative environment., • Proficiency in soldering to IPC J-STD- A-610 Class 3 standards., • Certification in IPC J-ATD-001 and/or IPC-A-610., • Experience in working under a microscope and magnification and with fine-pitch components., • Familiarity with ESD protection procedures., • Ability to read and understand technical documents and drawings., • Excellent attention to detail and manual dexterity. Strong computer and written skills is a PLUS, willing to train an enthusiastic applicant willing to learn a new skill. Salary: Up to 58k base Aerospace or Defense experience required *** Comprehensive Benefits Package: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including: Vacation, Sick and Paid Holidays

Job DescriptionDescription: JOB TITLE: Physicist Job Summary: The Physicist will play a key role in supporting research, development, and problem-solving across a variety of technical projects. This individual will apply principles of physics to design, test, and analyze complex systems, ensuring accuracy, efficiency, and innovation in all outcomes. Key Responsibilities: · Conduct research and experiments to develop new methods, processes, and solutions. · Apply physics principles to support engineering, product design, and advanced technology development. · Analyze and interpret data from experiments and simulations. · Collaborate with cross-functional teams, including engineers and technicians, to troubleshoot and improve systems. · Prepare detailed reports, documentation, and presentations of research findings. · Stay current with scientific advancements and recommend innovative applications relevant to company goals. Required Qualifications: · Master’s degree or Ph.D. in Physics (or related discipline) required. (5-10 years minimum) · Strong foundation in applied and theoretical physics. · Experience with modeling, simulations, and experimental design. · Proficiency with data analysis tools and scientific software. · Excellent problem-solving, analytical, and critical-thinking skills. · Strong communication skills, both written and verbal. · Ability to work independently and collaboratively in a fast-paced, on-site environment. · Prior work in R&D, manufacturing, aerospace, defense, or related industries. · Hands-on laboratory experience with advanced instrumentation. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will have the opportunity to work with a highly skilled team of professionals while contributing to impactful projects. We offer a collaborative environment, opportunities for professional growth, and the chance to make a difference in advancing technology. U.S. Dynamics Corporation is a leader in advanced engineering, defense technology. We are dedicated to innovation, precision, and advancing technology through applied science. Requirements:

Job DescriptionDescription: JOB TITLE: Quality Assurance Specialist Job Summary: We are seeking a Quality Assurance Specialist to join our team. The Quality Assurance Specialist is responsible for supporting and maintaining the highest quality standards in all manufacturing processes and products. This role involves overseeing first article inspections, and quality management systems, while acting as the focal point for customer interactions related to quality. The ideal candidate will have experience in aerospace manufacturing, ISO 9001/AS9100 standards, and an eye for detail in product audits and documentation. Key Responsibilities: · Review contracts from Quality Assurance perspective to ensure all quality requirements are met. · Maintain and report the status of the government’s inventory assets. Create and affix customer returned material tags to customer assets upon receipt. · Manage the Quality Management System (QMS) and ensure proper document control. · Schedule and conduct internal audits to maintain compliance with ISO 9001 and AS9100 standards. · Conduct scheduled and random production audits to maintain adherence to quality standards. · Review and analyze customer performance ratings for accuracy and work with customers to adjust customer performance ratings when there is a discrepancy with the customer’s delivery and/or quality data. · Maintain an active supplier quality delivery and quality performance matrix and interface with the supplier if the supplier’s quality performance falls below the QMS documented levels. · Perform the organization’s FSO (Facility Security Officer) requirements and ensure that the organization is meeting or exceeding the standards that are defined by FC-PO-001 Security Manual, FC-PO-002B Classified Material Receiving & FC-PR-003 Security Debriefing. Required Qualifications: · Minimum of 5 years of experience in Quality Assurance, preferably within aerospace or related industries. · Hands-on experience with ISO 9001 and AS9100 standards. · Expertise in First Article Inspection (FAI) documentation and processes. · Proficiency in using inspection equipment such as calipers, micrometers, optical comparators, Micro-Hite, and microscopes. · Ability to read and interpret engineering drawings, with a strong understanding of Geometric Dimensioning & Tolerancing (GD&T). · Strong attention to detail and the ability to work independently in a fast-paced environment. · Excellent verbal and written communication skills. · Proficiency in MS Office (Excel, Word, Outlook). · Must be able to obtain a U.S. government security clearance (clean criminal record required). Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description About Check-Mate Industries At Check-Mate Industries, Inc., a leader in precision manufacturing, we’re shaping the future of industries like aerospace, automotive, firearms, cosmetics, and medical. Our Thomasville, GA and West Babylon, NY facilities are a hub of innovation, where your skills as a CNC Machinist Programmer will help deliver high-quality solutions to global customers. With over 50 years of excellence, we’re known for out-thinking, out-maneuvering, and out-performing the competition. Join a collaborative team that values your expertise, fosters growth, and prioritizes safety and inclusion. Why Join Us? • Career Advancement: Access training, certifications (e.g., NIMS), and pathways to leadership or specialized roles., • Innovative Environment: Work with cutting-edge CNC technology and industry-standard software like Mastercam., • Impactful Work: Craft precision parts for critical applications, from life-saving medical devices to law enforcement tools., • Comprehensive Benefits: Enjoy competitive health plans, paid time off, and retirement options (details provided during hiring)., • Program CNC Machines: Use Mastercam or similar software to create programs, offsets, and calculations for precise part fabrication., • Set Up & Operate Equipment: Configure vertical and horizontal CNC milling centers and other machines, selecting tools, fixtures, and materials based on blueprints or CAD designs., • Quality Control: Inspect finished parts with tools like micrometers, calipers, and gauges to ensure blueprint accuracy., • Assembly & Testing: Assemble parts into complete units and test functionality using jigs, fixtures, and precision instruments., • Maintenance & Troubleshooting: Perform routine machine maintenance, diagnose issues, and schedule repairs to maintain efficiency., • Collaboration: Work with engineers, programmers, and inventory managers to optimize processes and resolve challenges., • High School Diploma or GED from an accredited institution., • 1-5 years of experience with CNC machines and programming (entry-level candidates with relevant training encouraged to apply)., • Proficiency with Mastercam or similar CNC programming software., • Experience using measuring tools (e.g., calipers, micrometers, height/depth gauges)., • 3-5 years of machining experience in a manufacturing environment., • Familiarity with shop floor control software (e.g.,PLEX, IQMS MES, TrakSYS, E2 Shop System, MasterCam)., • Experience with CAD software (e.g., AutoCAD, SketchUp, SolidWorks)., • Work in a fast-paced industrial setting with moderate to loud noise (hearing protection provided)., • Stand, sit, or walk for extended periods; occasionally lift up to 50 pounds or reach overhead., • Requires close vision, color vision, and ability to read small print or computer screens., • Skill Growth: Master advanced CNC programming and work with state-of-the-art tools., • Variety & Impact: Contribute to diverse projects with real-world significance across multiple industries. Check-Mate Industries is an equal opportunity employer committed to fostering a diverse and inclusive workplace for all employees. Powered by JazzHR 3DDJcKjKPO

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionJob Title: Mechanic Job Description We are seeking a skilled Mechanic to perform routine inspections and preventative maintenance checks on building systems, including HVAC units, plumbing fixtures, electrical panels, and fire safety equipment. You will ensure optimal production efficiency by maintaining and repairing manufacturing equipment and vacuum systems, diagnosing mechanical issues, and implementing corrective actions. Responsibilities • Conduct routine inspections and preventative maintenance checks on building systems, including HVAC units, plumbing fixtures, electrical panels, and fire safety equipment., • Perform scheduled lubrication and filter changes on machinery., • Perform routine maintenance and repairs on all manufacturing equipment and vacuum systems., • Troubleshoot mechanical issues, diagnose root causes, and implement corrective actions., • Conduct preventative maintenance tasks according to established schedules, including lubrication, cleaning, and inspections., • Read and interpret technical drawings, schematics, and maintenance manuals to understand equipment operation and repair procedures.Essential Skills, • Troubleshooting skills, • Mechanical and electrical knowledge, • Experience with pneumatics and preventive maintenance, • Ability to read blueprints and schematics, • Hydraulic systems understanding, • Experience as a maintenance technicianAdditional Skills & Qualifications, • High school diploma or equivalent experience repairing pumps and industrial machinery, • Proficiency with hand/power tools and diagnostic equipment, • Ability to read technical manuals, • Basic knowledge of pneumatic, vacuum, HVAC, plumbing, and electrical systems, • Strong problem-solving skills and attention to detailWhy Work Here? Enjoy a unique 9/80 work schedule, allowing for a three-day weekend every other week. Benefit from paid holidays, a comprehensive benefits package including health, dental, and vision insurance, life insurance, and short and long-term disability. Enjoy flexible spending options and a 401K plan. Take advantage of paid time off, including vacation, sick leave, and a whole week off between Christmas and New Year’s that doesn’t count against your PTO. Participate in multiple company events and awards throughout the year. Work with a team that values long-term employees and offers opportunities for internal growth. Work Environment Work onsite in a casual attire environment, where lab coats are provided to wear over your clothes. The company is an electronics manufacturer of satellite communication systems for the aerospace, space, and defense industry, located in Uniondale, NY. The team includes over 200 engineers and manufacturing personnel. Working hours are from 7:30 am to 5:15 pm, with every other Friday off. Job Type & Location This is a Permanent position based out of Uniondale, New York. Pay and Benefits The pay range for this position is $75000.00 - $90000.00/yr. 9/80 work weeks. Employees complete 80 hours of week in 9 days and have every other Friday off (three day weekend every other weekend) Company provides contractors with paid holidays (matching internal employee holidays) after 30 days Company is located near public transportation EOE/Disability/Veteran This position is onsite They offer a comprehensive benefit package including: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including: Vacation, Sick and Paid Holidays Whole week off between Christmas and New Years that doesn't come out of PTO Multiple company events/awards throughout the year Lot of long term employees with a lot of internal growth Workplace Type This is a fully onsite position in Uniondale,NY. Application Deadline This position is anticipated to close on Nov 5, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Precipart. located in Farmingdale, NY, is looking to hire skilled and experienced Machinists to set up and operate CNC machines in our state-of-the-art facility featuring versatile machining capabilities, including: Lathe, Swiss Turning, Milling, Grinding, and Gear Cutting. We're looking for career focused Machinists with experience in any of these machining areas to help us craft high-quality components that support our customers in the medical, aerospace, space and industrial markets. Our machinists are the makers of cutting-edge components that will impact the lives of many. At Precipart, we engineer possible. From the needle on the first Gramophone, to helping mankind explore Mars, to pioneering parts for robotic surgery, we’ve helped propel the human race forward for five generations. With our unique combination of engineering, design and manufacturing expertise, we’ve worked with our clients to turn possibilities into possible. Join us in driving human progress through engineering! • Our Machinist career growth path has four distinct tiers, from Entry Level, Class C, Class B, to Class A. Each tier is designed to build upon your skills and experience, providing targeted development and increasing responsibilities to help you achieve your professional goals., • Our renovated facilities is equipped with state of the art equipment and is temperature controlled providing a comfortable environment that is focused on quality, safety and 5S., • We offer two work shifts, 1st (7:00am to 3:30pm) and 2nd shift (3:00pm to 11:30pm which includes a 10% shift differential)., • Set up and run up to two machines to fabricate precision parts, • Load and unload parts in the machine, • Start the machining cycle, • Inspect dimensions of finished pieces, • Change tooling as needed, • Hold tight tolerance of +/- .0002, • Experience setting up and operating CNC machines to fabricate precision components. We welcome candidates of all experience levels to apply. The hiring class and compensation for this role will be determined through our assessment process, taking into account your skills, experience, and qualifications. Additionally, the final level will be based on the business needs at the time of hire., • Should demonstrate interest and aptitude in this line of work, • Relevant technical Associate degree or CNC Machining certificate is preferred for candidates with minimal work experience, • Experience fabricating precision parts, • Experience working to very close tolerances (+/- .0002), • Experience with reading blue prints for mechanical components, • Experience inspecting parts and using inspection tools, • Good aptitude for shop math, • Experience with changing live tooling, • Able to work in a fast paced environment and meet production schedule, • Maintain a clean, organized and safe work area, • Able to stand for duration of shift and lift up to 40lbs WHAT WE'LL OFFER YOU IN RETURN:- • Base salary plus incentive program, • Paid time off, • Employee Referral Bonus, • Medical, dental, vision insurance, • Flexible Spending Account, • Health Savings Plan, • Life insurance, enhanced short term and long-term disability insurance and other voluntary insurance plans, • 401k Profit sharing plan, • Tuition Assistance, • National Employee Assistance Program, • 529 College Savings Program, • Professional development and training, • Clean and organized workspace and manufacturing facilities, • Company events and outings Precipart engineers, designs and manufactures high precision custom solutions for the world’s leading companies in the Medical, Aerospace and Industrial markets. We act as a partner across your entire manufacturing process by engineering precision gears, mechanical components, assemblies and motion control solutions, as well as delivering end-to-end capabilities and more. With offices in Switzerland, the U.S. and U.K, we are here to help you “engineer possible”. You should be proficient in: • GD&T, • CNC Tooling, • Brake & Suspension Systems, • G-Code, • Machine Setups for Production Runs, • CNC Mill (3-4 axis VMC) (Fanuc, Mazak, Haas, Kitamura, Dmg Mori Seiki), • CNC Lathe (2-4 axis) (Mazak, Okuma, Doosan, Dmg Mori Seiki, Nakamura), • CNC Swiss Lathe (Star, Citizen, Tsugami, Tornos), • CNC Lathe (5+ axis) (Nakamura), • Gear Machinery (Fellows, Gleason) $20 - $46 / hr

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Johnson Service Group (JSG) is currently looking for a Director of Sales and Marketing who comes from a manufacturing background. This is a direct hire opportunity with manufacturer of small mechanical components in Hicksville NY area. Pay up to $185,000 This top sales leader will be responsible for providing the vision and direction / management of all Sales and Business Development operations (both Domestic and Foreign) which includes both internal and external sales teams, applications engineering, customer service operations / Ecommerce, and operations. Education & Experience: • B.S. in Engineering, Business or Marketing disciplines, MBA preferred., • A minimum of ten (10) years as a Senior Level Sales Leader in a manufacturing or industrial company., • Sales experience in aerospace, medical, and / or automation industries preferred., • Proven experience with managing and directing all sales and business development operations (at both the strategic and operational levels), including market competitiveness, tactical sales, pricing, Ecommerce, and distribution channel strategy., • Experience in strategic planning and execution. Knowledge of contracting, negotiating, and change management. Knowledge of structuring sales quota goals and revenue expectations., • Experience in planning marketing strategies, advertising campaigns, and successful public relations efforts., • Outstanding consultative selling abilities. Proven evangelical sales track record in a new product/new market environment., • Experience with a specific sales methodology and sales funnel management., • Sound administrative skills, well-developed management skills – principles and people., • Proven ability to recruit, train, and motivate personnel to balance staffing strength with profitability and growth., • Must have work authorization with the ability to travel up to 30%. Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with over 35 years of experience investing in people and companies. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. Company DescriptionOur people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals. Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs. We offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.Our people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals.\r\n\r\nJohnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs.\r\n\r\nWe offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more.\r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionWe are seeking a Quality Manager to join a leading aerospace & defense electronics manufacturer in the Long Island area. This role is a key member of the site leadership team, responsible for driving quality initiatives, ensuring product reliability, and maintaining compliance with AS9100 standards. The Quality Manager will serve as the single point of accountability for Quality across the division, with direct ownership of supplier quality, customer satisfaction, and continuous improvement initiatives.Key Responsibilities * Manage and maintain AS9100 QMS certification. * Ensure total product integrity through leadership, a shared quality vision, and continuous process improvements. * Develop, implement, and monitor key quality metrics, systems, and procedures to ensure optimal performance. * Define quality objectives, assign functional responsibilities, and track KPI performance. * Drive strategies to reduce the cost of poor quality and improve product performance. * Lead structured continuous improvement and root cause correction initiatives. * Oversee customer and supplier quality audit programs and manage customer scorecards. * Collaborate cross-functionally with sales, engineering, supply chain, and product management to resolve quality issues. * Partner with Supply Chain on supplier metrics and supplier quality management. * Manage the quality organization’s budget and resources to meet financial commitments. * Represent the company in customer interactions, supplier audits, and executive reviews. Qualifications * Bachelor’s degree in engineering (Master’s degree preferred). * Minimum 9+ years of quality leadership experience in electronics manufacturing, preferably within Aerospace & Defense. * Strong working knowledge of ISO9000 and AS9100 quality systems. * Demonstrated success leading continuous improvement, supplier quality, and customer satisfaction initiatives. * Six Sigma / Lean background strongly preferred. * Professional communication skills with executive presence. * Ability to obtain and maintain a DoD Secret clearance. Why Join * Opportunity to lead the entire Quality function within a high-growth defense electronics manufacturer. * Direct impact on strategic quality initiatives that shape reliability, supplier performance, and customer satisfaction. * Collaborative environment with strong executive support for continuous improvement. * Competitive compensation and a full benefits package. About IMS Recruiting IMS Recruiting partners with leading Aerospace & Defense organizations to connect top technical and leadership talent with career-defining opportunities.

Job DescriptionQuality Engineer Title: Quality Engineer Location: Old Bethpage, NY Salary: $80,000 - $90,000 For over 50 years, we are a leading independent provider of diffusion and thermal-sprayed enhanced surfaces. As a an innovator in the field of HVOF and plasma thermal spray coatings, diffusion coatings, and coating surface finishing, we prepare critical components for aerospace, transportation, energy, and defense industries. As a Quality Engineer, you will be responsible for the quality systems, process qualifications, nonconformance management, and continuous improvement projects. This individual will leverage quality knowledge to bring new products and processes to market. What You Will Be Doing- Act as lead product and process quality expert for customers and internal organization • Prepare for and manage all source inspections, • Develop, revise, apply and maintain quality procedures, quality plans, documents and work instructions, • Implement methods of procedures for inspecting, testing, and evaluating the precision and accuracy of products and calibration of equipment, • Perform internal & external audits and surveysWhat You Need for this Position- Bachelor's degree in Materials Science, Chemical Engineering, Mechanical Engineering or related field, and/or equivalent experience, • 1+ years of professional experience in manufacturing You should know some of the following: • Manufacturing Quality, • ISO 9001/AS9100, • Lean Six Sigma, • PFMEA, • QMSWhat's In It for You- Competitive base salary and overall compensation package, • Full benefits: Medical, Dental, Vision, • 401 (K) with company match, • Paid time off (PTO), • HSA/FSA, • Life Insurance All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Position Title: Manufacturing Engineer Position Description: Protingent Staffing has an exciting Direct Hire opportunity for a Manufacturing Engineer with our client that is in Plainview, NY. Key areas of experience we’re looking for include: • Mechanical assemblies and precision component handling, • Finishing operations for metal and plastic components (cleaning, passivation, electropolishing, etc.), • Heat treating and surface finishing processes, • Medical device packaging and related quality requirements, • Strong familiarity with PPQP (Pre-Production Quality Planning) and other process validation activities (IQ, OQ, PQ), • Lean Six Sigma Green Belt or Black Belt certification (preferred) Job Description: • The Manufacturing Engineer is responsible for developing, implementing, and sustaining efficient, compliant, and cost-effective manufacturing processes in a contract manufacturing environment., • This role supports a wide variation of manufacturing processes, including CNC machining, finishing, secondary operations, and small mechanical assemblies for complex medical device components., • The Manufacturing Engineer ensures compliance with FDA Quality System Regulations (21 CFR Part 820) and ISO 13485 standards while leading process optimization, supporting quotations, and driving continuous improvement initiatives across the value stream. Job Responsibilities: • Process Development & Optimization:, • Develop, validate, and optimize CNC machining, finishing, assembly, and other special processes to meet tight tolerances and medical device requirements., • Lead value stream mapping initiatives to identify waste, streamline workflows, and improve throughput., • Lead and facilitate process FMEAs (pFMEA) to proactively identify and mitigate process risks., • Provide DFM feedback during new product introduction and design transfer activities., • Quoting & Costing Support:, • Assist in quotation and estimating processes by analyzing manufacturing feasibility, cycle times, tooling requirements, and capacity., • Partner with sales, project management, and production teams to ensure accurate and competitive customer proposals., • Compliance & Documentation:, • Ensure all manufacturing processes and documentation comply with FDA QSR, ISO 13485, and internal quality system requirements., • Author and maintain manufacturing documentation, including work instructions, process flow diagrams, PFMEAs, control plans, and validation protocols/reports., • Support internal and external audits, including FDA, ISO, and customer audits., • Validation & Qualification:, • Develop and execute equipment qualifications (IQ/OQ/PQ) and process validation protocols in compliance with regulatory standards., • Collaborate with Quality Engineering to establish process controls, SPC, and robust monitoring systems., • Continuous Improvement & Problem Solving:, • Drive Lean Six Sigma projects to reduce variation, improve yield, and lower manufacturing costs., • Lead structured root cause investigations and implement corrective and preventive actions (CAPA)., • Champion a continuous improvement culture across all manufacturing processes., • Technical Support & Cross-Functional Collaboration:, • Provide hands-on support to production teams for troubleshooting process and equipment issues., • Train operators and technicians on new processes, equipment, and standards., • Collaborate with suppliers, toolmakers, and equipment vendors to qualify and integrate new technologies. Job Qualifications: • Education: Bachelor’s degree in manufacturing engineering, Mechanical Engineering, Industrial Engineering, or related field., • 3–7 years of experience in manufacturing engineering within a regulated environment (medical device preferred)., • Experience across a wide range of manufacturing processes, including CNC machining (multi-axis milling/turning), finishing, deburring, cleaning, passivation, and small assembly., • Strong background in process validation (IQ/OQ/PQ) and regulatory compliance (FDA QSR & ISO 13485)., • Proficient in CAD/CAM and GD&T., • Knowledge of value stream mapping, FMEA, Lean Manufacturing, Six Sigma, and SPC., • Ability to support quotation processes with accurate cycle time and cost analysis., • Excellent documentation, communication, and cross-functional teamwork skills., • Ability to manage multiple projects in a fast-paced, contract manufacturing environment., • Strong problem-solving, analytical, and leadership skills. Job Details: • Job Type: Direct Hire, • Salary Rate Range: $110-130K, • Location: Plainview, New York. About Protingent: Protingent is a niche provider of top Engineering and IT talent to Software, Electronics, Medical Device, Telecom, and Aerospace companies nationwide. Protingent exists to make a positive impact and contribution to the lives of others as well as our community by providing relevant, rewarding, and exciting work opportunities for our candidates.

Job DescriptionDescription: Cox & Company solves the aerospace industry's most challenging ice protection and temperature control problems. For over 80 years Cox has worked with OEMs, Tier 1 and Tier 2 Suppliers, as well as all major modification and finishing centers throughout the world. From initial design concepts through aircraft integration and operation, our company provides the highest quality full-lifecycle support to our customers. Cox & Company, Inc. is looking for an outgoing individual who will specialize in the manufacturing precision of using composite material in the Autoclave Area. Requirements: • Perform vacuum bagging and related processes for fabrication and curing composite parts., • Clean and smooth molds, cores, and core boxes, and repair surface imperfections., • Assemble cores into lower sections of molds, to create mold assembly per work instructions., • Clean and maintain work area to ensure safe and efficient work environment., • De-molding cured parts, • Ensure compliance with company policies and safety regulations, • Document materials utilized in creating parts for traceability purposes., • Work to meet production goals and deadlines, • General knowledge of practices and procedures used to fabricate composite parts or similar is preferred., • Ability to read and correctly interpret instructions in English is a must., • Ability to use measuring instruments., • Ability to lift rolls of material., • Ability to use a computer, • 401K, • Flex Scheduling, • Health, Dental and Vision, • Health Saving Account, • Life Insurance, • Disability Benefits, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at Position Summary: TTM is an advanced-technology leader in highly sophisticated surveillance, communications, analysis and integration solutions. Our systems are deployed across a wide range of land, sea and air applications, providing our aerospace, defense and commercial customers with a distinct tactical advantage. In this role, the PCB Staff Design Engineer will design moderate to complex printed circuit board (PCB) layouts in the domain of Digital, Analog, Power & RF interconnect applications. This includes responsibility for circuit board layout conceptualization, (CAD application by means of Siemens Xpedition, PAD's or Cadence Allegro tool sets), detail design activities and value-engineering in support of internal TTM programs. Areas of emphasis/focus include physical design (CAD implementation)/documentation utilizing best practice of electrical IPC standards/methodologies with experienced approach to manufacturing and sustaining maintenance of legacy design projects. Complementary support provided by a combination of TTM Management, Field Application Engineering, Electrical/Mechanical Engineering and NPI Manufacturing teams. Duties and Responsibilities: Design Engineering Physical Design • PCB concept sketches for assistance in design layout estimating, • PCB design suggestions/trade-offs regarding initial engineering inputs, • Support changes to existing schematic diagrams using TTM suite of tools: OrCAD and/or DxDesigner \n • Place and route components ensuring that all electrical and physical specifications meet the detailed design requirements for each PCB design. Utilization of Siemens Xpedition/PAD's and/or Cadence Allegro required\n, • Participate in design reviews, interface with electrical, mechanical, manufacturing and process engineers to design proto-type and production printed circuit boards in accordance with TTM standards and quality procedures\n, • Provide layout feedback to design engineers as needed to ensure functionality and manufacturability of PCB designs\n, • Create fabrication and assembly drawings (AutoCAD 2023), parts list & incorporate changes to existing design documentation. Create and maintain component libraries\n\n\n, • Generate all output files (ODB++, Bill of Materials & PCB/CCA documentation) required for the manufacture of the board and assembly\n, • Product safety and EMI consideration during eCAD layout (UL, CSA, NEBS, Etc.)\n, • Standardization of electrical components and eCAD libraries utilizing IPC or vendor specific standards\n, • Exceedingly experienced with High-Speed PCB Design Constraints: Differential Pairs, Routing Topologies, Controlled Impedance, Length-matched Traces and Delay Tuning\n, • Demonstrated experience with RF PCB routing complexities. Implement layout rules for RF transmission lines (Micro-strip & Coplanar Waveguide), signal line isolation practices, via fencing & unique RF routing structures\n, • Audio (Analog & Digital separation) PCB best practice layout guidelines highly recommended\n, • Direct design experience related to multi-layer CCA and Flex PCB technologies \n, • Current knowledge of μ-via/HDI layout methodologies and best practices\n Education: Minimum Associates in Electrical Design/Drafting or BS in Electronic Technology. Related eCAD training certification/career experience will be considered in lieu of a degreed program with 10 year experience. Experience: Minimum of 10 years' experience with primary hands-on demonstrated proficiency of Siemens PAD's (VX2.8 or later), Siemen's Xpedition (VX2.14 or later) and/or Cadence Allegro/OrCAD (17.4 or later) product experience is required. Comprehensive understanding of electrical and mechanical engineering design practices related to printed circuit board electrical drafting and fabrication drawing creation experience is essential. Necessary familiarities with electrical design utilizing IPC standards, IAW IPC-2221/3 and associated specs is critical. Knowledge and methodology utilizing standard IPC Class III approach to design and manufacturing concerns is also necessary. BS or related degree in engineering or a related discipline \n • Related PCB design for the Aerospace and Defense sectors is preferred.\n, • CID/CID++ Certification for PCB Designers highly recognized as professional validation of design, documentation, and manufacturability skills within the industry.\n, • Solid oral communication and interfacing skills with technical and manufacturing personnel to resolve engineering tasks. Propose alternatives when faced with challenging PCB design situations including resolutions to non-standard problems.\n\n, • Appropriate understanding of vendor component data sheets for creation of schematic library and/or PCB footprints expected.\n #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $99,150 - $174,367 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job Description Are you detail-oriented, analytical, and looking to make a direct impact on operational success? We’re seeking a Purchasing Administrator to manage, review, and optimize vendor and customer orders. This role is crucial to mitigating risk, ensuring compliance with contractual terms, and maximizing profitability through strategic contract execution. Key Responsibilities • Accurately process all customer and vendor orders in a timely manner, • Review and interpret customer purchase orders and associated terms and conditions, • Analyze vendor proposals and contract terms for alignment with company requirements, • Identify, communicate, and resolve any conflicts between purchase orders and proposals, • Collaborate cross-functionally with internal teams and external suppliers, • Monitor order progress and follow up to ensure timely delivery, • Manage and set clear expectations with customers regarding lead times and delivery schedules, • Evaluate current inventory levels when processing orders to optimize fulfillment, • Communicate effectively—both verbally and in writing—with internal teams, vendors, and customers, • Proven experience as a Purchasing Administrator or similar role in procurement, supply chain, or operations, • Excellent attention to detail with the ability to identify errors or inconsistencies, • Proficiency with Microsoft Office Suite (Excel, Outlook, Word) and Adobe Acrobat, • Strong analytical, organizational, and time-management skills, • Effective problem-solving abilities and the confidence to resolve contract discrepancies, • Strong interpersonal and communication skills for internal and external collaboration, • Ability to multitask and prioritize in a fast-paced, deadline-driven environment, • A growing company where your attention to detail and process improvement mindset will be valued, • An opportunity to collaborate with dynamic teams and contribute to supply chain excellence Apply today to join a results-driven team where contracts are more than just paperwork—they’re the engine that drives performance. Company DescriptionPioneer is a market leader with with nearly 80 years of history and consistent growth. We specialize in providing tailored lifecycle sales and distribution solutions to manufacturing companies serving the military market to support our warfighters around the globe. Pioneer is part of a publicly traded business in the Aerospace & Defense industry with extensive resources.Pioneer is a market leader with with nearly 80 years of history and consistent growth. We specialize in providing tailored lifecycle sales and distribution solutions to manufacturing companies serving the military market to support our warfighters around the globe. Pioneer is part of a publicly traded business in the Aerospace & Defense industry with extensive resources.

Job Description Join Precipart in Farmingdale, NY, as a talented CNC Equipment Specialist. We seek individuals with expertise in setting up and operating cutting-edge CNC machinery such as Lathes, Swiss Turning, Milling machines, Grinders, and Gear Cutting tools. Our state-of-the-art facility caters to industries like medical, aerospace, and industrial markets. You'll be part of a team that fabricates top-tier components that advance human progress. Our machining journey spans generations, from creating the first Gramophone needle to contributing to Mars exploration. Be part of our legacy of turning ideas into reality with engineering excellence. • Career Path: Navigate your professional journey from Entry Level up to Class A, with structured growth designed to hone your skills and responsibilities., • Work where quality and safety converge in our temperature-controlled facilities., • Flexible work shifts: 1st (7:00am to 3:30pm) and 2nd (3:00pm to 11:30pm) with added shift differential., • Relocation bonus for those moving to the area. Responsibilities, • Handle and operate up to two machines, ensuring precision fabrication., • Engage in loading, unloading, and initiating the machining cycles., • Inspect and verify the dimensions of finished products., • Adjust tooling to ensure tight tolerance of +/- .0002., • Demonstrable experience with CNC machine setup and operations for precision tasks. We encourage applicants at all experience levels., • Technical flair and a keen interest in machining., • Desirable: Technical Associate Degree or CNC certification for less experienced individuals., • Proficient in fabricating meticulously precise components., • Accustomed to working with minimal tolerances (+/- .0002)., • Blueprint reading proficiency., • Skilled in inspection tool utilization., • Solid foundation in shop math and live tooling., • Ability to thrive in a dynamic production environment., • Fosters a clean, organized, and safe workspace., • Physical capability to stand for long periods and lift up to 40 lbs., • Incentive program complementing base salary., • Comprehensive insurance packages including medical, dental, and vision., • Financial wellness through 401k, profit sharing, and tuition assistance., • Career development and a positive, organized workspace. Proficiency in: • GD&T, • CNC Tools & Technologies, • Production Cycle Management, • Precision Blueprint Interpretation

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description For more than 80years, Pioneer, a HEICO company, has thrived by serving niche segments of the defense industry by providing distribution and support services. Pioneer high energy culture focuses our Team Members' on providing the highest quality of service. Our leadership approach creates a dynamic environment that continually challenges our Team Members to perform at their best. Pioneer offers competitive compensation, paid vacation and holidays, an excellent 401K plan with company match, and medical, dental, life, and disability insurance. The Business Data Analyst / Account Executive in a combination of a customer services capacity to the company’s most valuable accounts and analysis of micro and macro trends. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Identify and capture orders for Pioneer and the company’s top vendors., • Provide quotes in accordance with Pioneer’s guidelines., • Understand the supplier’s evolving objectives and Pioneer’s role to satisfy them., • Understand and speak to the significance and value of Pioneer’s support functions., • Be an expert in Pioneer’s market segment., • Have a clear understanding of vendor products and applications., • Understand growth market segments and products Pioneer to maintain success., • Anticipate changes in the vendor relationships as well as threats from the industry and competitors., • Travel to tradeshows and vendor sites., • Articulate (verbal and in writing) sales and customer service communications internally and externally., • Work onsite effectively as part of the Pioneer team., • Proven experience in a business development capacity., • Drive and energy to manage multiple accounts while looking for new opportunities., • Excellent written and verbal communication skills., • Strong Excel and data analysis., • Project management., • Creative problem-solving skills., • Strong interpersonal skills., • Ability to handle multiple tasks simultaneously and prioritize.Company DescriptionPioneer is a market leader with with nearly 80 years of history and consistent growth. We specialize in providing tailored lifecycle sales and distribution solutions to manufacturing companies serving the military market to support our warfighters around the globe. Pioneer is part of a publicly traded business in the Aerospace & Defense industry with extensive resources.Pioneer is a market leader with with nearly 80 years of history and consistent growth. We specialize in providing tailored lifecycle sales and distribution solutions to manufacturing companies serving the military market to support our warfighters around the globe. Pioneer is part of a publicly traded business in the Aerospace & Defense industry with extensive resources.

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Director of Manufacturing - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in engineering, Manufacturing Engineering preferred, or other technical-related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years of experience in a manufacturing environment, including managing salaried and hourly staff., • Minimum 5 years of experience using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. SUMMARY OF POSITION The Director of Manufacturing Engineering (ME Director) is responsible for supporting business goals, including product cost and quality, schedule adherence, and timely delivery to meet customer demand. It is a hands-on position responsible for ensuring that manufacturing processes, tooling, and equipment support the business's Safety, Quality, Delivery, and Productivity goals. This ME Director plays an integral part in plant operations, special projects, and is responsible for developing and maintaining a motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. SUPERVISORY RESPONSIBILITIES • The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Responsible for developing the standard processes used to manufacture heat exchangers, including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible for ensuring all production processes are defined using the standard work formats and templates, as well as creating any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Design and develop any tooling or fixtures needed to support the production processes., • Support the Operations team in the achievement of KPI’s related to shipping volume targets, on-time delivery, past due backlog, customer lead time, efficiency, utilization, and overtime premium expense., • Support and drive continuous improvements in manufacturing metrics, including quality, yields, cycle time, productivity, and cost. Promote process improvement, LEAN manufacturing methodologies, and 5S processes., • Implement and drive continuous improvement activities through the implementation ofthe change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements/quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment and tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for the entire department., • Provide oversight for manufacturing activities in our Mexico facility., • Minimal travel expected. Potential travel to a facility in Mexico in support of overall business objectives. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical, along with longer-term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems, preferably Oracle., • Proficient in Microsoft Office programs, including Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills., • Familiarity with assembly, welding, brazing, machining, and testing processes is desired., • Demonstrated knowledge of and familiarity with a variety of lean tools and methodologies, including, but not limited to:, • VSM, Standard Work, Pull Systems & Kanban, Integrated Business Planning, Daily Management, 5S/Visual, • Management, 3P, SMED, TPM, Variation Reduction, and Six Sigma. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $175,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Our client is currently fielding applicants for an exciting career opportunity as an Inventory Clerk, Get your foot in the door with a leading aerospace manufacturing organization!.

Position Summary: Operate and set-up CNC and conventional equipment for the manufacture of aerospace products. Duties and Responsibilities: • Set-Up and operate vertical milling machines and/or horizontal milling machines., • Set Up and run conventional milling machine., • Machine detail parts and final assemblies from the engineering drawings and methodsheets using fixtures and drill jogs., • Work to close tolerance (+/- .0005), • High School degree or GED Certificate, • Minimum 5 years CNC/conventional experience., • First piece inspection, • Ability to read blueprints. Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder. The Hughes-Treitler Business Unit designs and manufactures state of the art plate-fin heat exchangers, cold plates, condensers, evaporators, and other heat transfer products. We provide custom design and engineering services, to high quality manufacturing standards, for the aircraft, engine and industrial heat exchangers in the mobile/marine/avionics/space and missile markets. Compensation Employee Type: Hourly Salary Minimum: $50,000 Salary Maximum: $80,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Job Description We are seeking an Administrative Assistant to join our team! You will perform clerical and administrative functions in order to drive company success. Responsibilities: • Provide administrative support to sales and operations team to increase the overall efficiency of a company's daily business operation., • Processing orders, • Perform clerical duties including filing, scanning and emailing., • Prepare and email customer quotations at direction of sales team, • Provides excellent customer service to clients, and maintains positive interaction with peers and supervisors, • Monitor and distribution of general sales email account, • Liaison to multiple departments., • Upload files to appropriate external websites, • Performs additional office management tasks as directed, • Ability to coordinate multiple projects at once., • Ideal candidates will possess strong attention to detail and accuracy, • Strong communication and interpersonal skills and ability to work in a team environment., • Strong analytical and problem-solving skills with ability to multi-task., • Efficiency in Microsoft Office Suite including Word, Excel, PowerPoint and Outlook. Company DescriptionPioneer is a market leader with with nearly 80 years of history and consistent growth. We specialize in providing tailored lifecycle sales and distribution solutions to manufacturing companies serving the military market to support our warfighters around the globe. Pioneer is part of a publicly traded business in the Aerospace & Defense industry with extensive resources.Pioneer is a market leader with with nearly 80 years of history and consistent growth. We specialize in providing tailored lifecycle sales and distribution solutions to manufacturing companies serving the military market to support our warfighters around the globe. Pioneer is part of a publicly traded business in the Aerospace & Defense industry with extensive resources.

Position Summary: Operate and set-up CNC and conventional equipment for the manufacture of aerospace products. Duties and Responsibilities: \n • Set-Up and operate vertical milling machines and/or horizontal milling machines.\n, • Set Up and run conventional milling machine.\n, • Machine detail parts and final assemblies from the engineering drawings and methodsheets using fixtures and drill jogs.\n, • Work to close tolerance (+/- .0005)\n, • High School degree or GED Certificate\n, • Minimum 5 years CNC/conventional experience.\n, • First piece inspection\n, • Ability to read blueprints.\n Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder. The Hughes-Treitler Business Unit designs and manufactures state of the art plate-fin heat exchangers, cold plates, condensers, evaporators, and other heat transfer products. We provide custom design and engineering services, to high quality manufacturing standards, for the aircraft, engine and industrial heat exchangers in the mobile/marine/avionics/space and missile markets. Compensation Employee Type: Hourly Salary Minimum: $50,000 Salary Maximum: $80,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359.

Education: Bachelors degree in manufacturing engineering, Mechanical Engineering, Industrial Engineering, or related field. Protingent is a niche provider of top Engineering and IT talent to Software, Electronics, Medical Device, Telecom, and Aerospace companies nationwide. Protingent Staffing has a

Our client is currently fielding applicants for an exciting career opportunity as a Stockroom Clerk. Get your foot in the door with a leading aerospace manufacturing organization! We are currently looking for an outgoing individual that will receive, store, and issue stockroom material.

Experience with manufacturing type contracts, preferably in the machine tool, automation and/or industrial industries. Minimum of 5 years of Project Management experience in industrial manufacturing machinery or equipment; or equivalent combination of education and experience. Individuals with exper

Job Summary This position is responsible for planning, scheduling, and coordinating preventive maintenance, calibration activities, and spare parts management to support uninterrupted production and regulatory compliance.Job Description Responsibilities: Check and inspect all production machinery an

Moldmaker Congers, NY The primary mission of the Mold Maker under limited supervision, performs a variety of operations to construct, repair or maintain in-house molds/tooling.Assignments may require the use of ordinary tool room equipment and/or outside tooling suppliers and sub-contractors.This po

Job Title: Senior Materials Engineer Location: Mahwah, NJ Hours/Schedule: 8:00am to 5:00pm Compensation: $53.Type: Contract Responsibilities Develops and modifies process formulations, methods and controls to meet quality standards.Recommends and implements improvements, modifications or additions t

What We are Looking For: Comply with current Good Manufacturing Practices (cGMP). Train new employees, Operators, and Junior Mechanics on manufacturing techniques and procedures as directed by supervision. At least 3 years of experience in a manufacturing environment.

Aerospace Engineer Job Duties: Contributes to the design, manufacturing, and testing of aircraft and aerospace products.

Jewelry Manufacturing & E-Commerce. The ideal candidate is detail-oriented, organized, and thrives in a fast-paced manufacturing environment.

It takes hard work and smarts to get you into the reactor room.But if you have a strong interest in math, chemistry, physics and engineering, you might just have what it takes to be a Machinist's Mate Nuclear.As an MMN, you are the Navy's nuclear reactor mechanic.It is your responsibility to perform

Manufacturing Manager Needed For Leading Contract Manufacturing Company. Understanding of ERP or other manufacturing software, preferably with Oracle manufacturing systems. My client is a leading contract manufacturer who is rapidly growing! They are looking to add a Manufacturing Manager to their t

As a Navy Fighter Pilot, the sky is your domain.You'll be part of an elite group of aviators who fly and fight in the world's most lethal jets-all from the deck of an aircraft carrier.To do this job well, you'll need critical thinking skills, unshakeable determination and the will to persevere throu

Primary responsibility of the incumbent will be operation of general manufacturing equipment under close supervision in accordance with current relevant quality standards or standardized procedures and within safety guidelines in the production of Flublok Drug Substance in the downstream processing

The Manufacturing Engineer is responsible for developing, implementing, and sustaining efficient, compliant, and cost-effective manufacturing processes in a contract manufacturing environment. Author and maintain manufacturing documentation, including work instructions, process flow diagrams, PFMEAs

Provide leadership and direction for the day-to-day manufacturing operations to meet demand based on customer needs. Lead teams in solving manufacturing problems when gaps are detected. Recommend process and operational changes to overcome process issues, avoid deviations, and improve productivity b

Adjusting manufacturing strategies to meet changing market conditions for a medium to large sized manufacturing operation. Implementing manufacturing standards and defining guidelines for assigned manufacturing disciplines such as engineering, production, quality, etc. Working tasks might include: D

As we navigate the complexities of developing technology, BAE Systems is seeking a Manufacturing Director to identify and drive manufacturing technologies that support the vision for factory workplace of the future. Operations leadership in a high volume high / mix manufacturing leading teams in man

The Manufacturing Engineer is responsible for developing, implementing, and sustaining efficient, compliant, and cost-effective manufacturing processes in a contract manufacturing environment. Knowledge of value stream mapping, FMEA, Lean Manufacturing, Six Sigma, and SPC. Assist in quotation and es

Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and environmental commitment. Creates employee schedules around manufacturing production hours and needs. Executes