Aerospace manufacturing jobs in North Bergen, New JerseyCreate job alerts

Job Description The Source Inspector, (SI) is responsible for performing inspection operations of in-process or completed hardware, including dimensional, and visual inspection. The source inspection may include reviewing all paperwork relating to the product at hand. This includes operations such as Final Inspection, Receiving Inspection, Outside processing, and Assembly. The SI will also verify FAI’s to AS9102 for accuracy and completeness. The SI must be familiar with hand tools and gaging techniques. The SI will also be fluent in B/P interpretation and GD&T. Source Inspection will occur at end customer’s suppliers’ location. The SI will travel to these locations. Job Responsibilities: • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • Knowledge of CMM Inspection process, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection), • Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation, • Process warehouse materials, • Rely on instructions and pre-established guidelines/procedures to perform the functions of the job, • Support positive corrective actions and identification of root cause, • Other duties as assigned.Required Skills, • Experienced quality individual in dimensional inspection of aerospace machined components, • Experience in performing FAI’s – AS9102, • Experience with hand measurement tools, • MS Outlook, and EXCEL experience, • Experience with hand measurement gages, conduct conventional inspection to engineering requirements, • Knowledge and experience in GD&T (ASME Y14.5), • Knowledge and experience with blueprint interpretation, • Valid drivers license and auto insurance required.Additional Desired Skills:, • Prior practical experience and implementation of Quality inspection tools and equipment., • Experience in RCCA, and problem solvingGeneral Requirements, • Ability to handle complex situations and solve complex problems, • Ability to work effectively under pressure to meet deadlines, • Ability to press and analyze technical and business information, • Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers, • Ability to remain seated for up to 5 hours at a time, • Fluent English – reading and writing is required, • Professionalism, integrity, and exceptional attention to detail, • Strong independent decision-making skills; excellent analytical skills and professional judgment, • Excellent interpersonal, written, and verbal communication skills, • Must be able to simultaneously manage several objectives, • Must be detail oriented, organized, and self-motivatedAdditional Qualifications (Preferred):, • 3+ years’ experience as a quality inspector or technician., • 3+ years’ experience in an aerospace manufacturing facility, • 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation, • Proficient with Microsoft Office products, • Effective communication skills, • Detail oriented, • Any combination of education and experience may be considered, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location. • Valid Driver’s License, • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.70/mile 2024) when driving personal vehicles on company business, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded) Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Powered by JazzHR sSmnIb9x3a

Job Description * Inspect, test, or measure materials or products being produced * Performing and Approving the quality of raw materials before manufacturing begins * Read and understand blueprints and specifications * Monitor or observe operations to ensure that they meet production standards * Recommend adjustments to the process or assembly * Measure products with rulers, calipers, gauges, or micrometers * Accept or reject finished items * Remove all products and materials that fail to meet specifications * Discuss inspection results with those responsible for products * Report inspection and test data * Attention to details * Do incoming, in-process, and final inspection * Perform Receiving, 1st Piece and In-Process Inspections for work in process during manufacture * Verify and document that materials are manufactured to blueprint requirements * Maintain acceptable quality levels during manufacture of products and assemblies * Undertake special projects and other duties as assigned Requirements: * 3 – 5 years work experience or related work experience required * Education – College degree or equivalent * Must have ability to identify and resolve problems, effectively manage change and deal with conflict in a fast paced environment * Proficiency with calipers, micrometers, perform First Article inspection in accordance with AS9100 in process and final inspection processes a plus * Knowledge of operating electronic inspection equipment, such as coordinate-measuring machines (CMMs) a plus * Must be self-motivated and have the ability to work independently, within prescribed guidelines, or as a team member * Knowledge of MRP software systems and experience with enterprise resource planning (ERP) system a plus * Working knowledge of ISO 9001, 5S and/or Lean Manufacturing a plus * Aerospace product knowledge a plus * Must be a U.S. Citizen or Lawful Permanent Resident Company DescriptionREQUIREMENTS • Must be a U.S. Citizen or a Green Card holder COMPANY OFFERS -\tGrowing Backlog -\tCompetitive Rate Structure (Depending on Ability and Experience) -\tTrainings -\tGreat Health, Dental and Vision Benefits, Life Insurance Package -\tProfit Sharing and Bonuses -\t401K Matching -\tSafety Equipment -\tModern Equipment and Attractive Shop -\tEqual Employment OpportunityREQUIREMENTS\r\n• Must be a U.S. Citizen or a Green Card holder\r\n\r\nCOMPANY OFFERS\r\n•\tGrowing Backlog\r\n•\tCompetitive Rate Structure (Depending on Ability and Experience)\r\n•\tTrainings\r\n•\tGreat Health, Dental and Vision Benefits, Life Insurance Package\r\n•\tProfit Sharing and Bonuses\r\n•\t401K Matching\r\n•\tSafety Equipment\r\n•\tModern Equipment and Attractive Shop\r\n•\tEqual Employment Opportunity

Job Description Class B Driver /Warehouse associate (one Position) Employment type: full-time Our Company is looking for a CDL B Driver/Warehouse Associate (one position) to become a part of an amazing team that will feel like family. We are happy to say that our Drivers are valued and home every night. As part of this dual position as a Driver and a Warehouse Associate, you will drive a truck or van with capacity of over or under 26, 000 GVW, primarily to deliver or pick up merchandise or packages within a specified area. You may need to load or unload the truck. As a Warehouse Associate, you will have a variety of responsibilities so things will never be boring! You will verify and keep records on incoming and outgoing shipments, prepare items for shipment, arrange by customer pick-up, and participate in assembling, addressing, and shipping materials. New Haven offers our employees benefits (medical, dental, optical, life insurance) We also offer and HSA, Flexible Spending, and a matching 401(k) Applicants must have a clear CDL B license. Would you like to join our New Haven Team? Text NHME Careers to 97211 to learn more • Principals only. Recruiters, please don't contact this job poster.Company DescriptionCelebrating over a 114 Years of Service For over a century, New Haven has been a family business that greatly values our relationships with our customers and the integrity, durability and workmanship of our products. Our products combine innovative designs, engineering excellence and top-of-the-line components and are reflective of our years of experience in and dedication to the various industries we serve. New Haven is dedicated to providing you and your company with the highest quality CORRUGATED, PACKAGING, MOVING EQUIPMENT and CARGO CONTROL available in the market. We are excited for our over 105 years in the business, during which time we have served the Moving, Transportation, Entertainment, Aeronautics, Health, and Aerospace industries, as well as Government Agencies, Universities, Libraries, Museums, and Corporations. New Haven began with a single horse-drawn wagon However, no matter how technologically advanced we have become (we were the first ever company to utilize lasers in our manufacturing of Furniture Moving Pads and our Cargo Control is now employed in outer space), we still retain a personalized orientation with our customers and care about your individual success. We have Multiple fully-stocked locations to serve you across the country, with experts in moving and product engineering happy to assist you.Celebrating over a 114 Years of Service\r\n\r\n\r\nFor over a century, New Haven has been a family business that greatly values our relationships with our customers and the integrity, durability and workmanship of our products.\r\n\r\nOur products combine innovative designs, engineering excellence and top-of-the-line components and are reflective of our years of experience in and dedication to the various industries we serve. New Haven is dedicated to providing you and your company with the highest quality CORRUGATED, PACKAGING, MOVING EQUIPMENT and CARGO CONTROL available in the market.\r\n\r\nWe are excited for our over 105 years in the business, during which time we have served the Moving, Transportation, Entertainment, Aeronautics, Health, and Aerospace industries, as well as Government Agencies, Universities, Libraries, Museums, and Corporations.\r\n\r\nNew Haven began with a single horse-drawn wagon However, no matter how technologically advanced we have become (we were the first ever company to utilize lasers in our manufacturing of Furniture Moving Pads and our Cargo Control is now employed in outer space), we still retain a personalized orientation with our customers and care about your individual success. \r\n\r\nWe have Multiple fully-stocked locations to serve you across the country, with experts in moving and product engineering happy to assist you.

Job Description Purchasing Agent / Buyer Job Description • Seeking a Purchasing Agent for a manufacturing company specialized in the aerospace industry., • The ideal candidate has 3+ years purchasing experience in a manufacturing environment., • You have strong problems solving skills and understand cost., • You have the ability to deal with change and pressure by shifting priorities, deadlines and goals., • Responsible for verifying, preparing, and forwarding purchase orders, and verifying receipt of items., • Negotiate the best supplier terms for pricing and delivery based on customer needs, specific budget, and schedule requirements., • Prepare written inquiries and obtain written quotes for vendor supplied items and subcontracts., • Negotiate terms and conditions, and issue purchase order or subcontract with all required documentation., • Negotiate and issue change orders to purchase orders and subcontracts with all required documentation., • When required, manage rental equipment, and maintain files to chart delivery, rates, and return., • Review, coordinate and resolve invoice problems with supplier and A/P., • Associates required, Bachelor's degree preferred., • Industry related experience within an aerospace machining environment a plus., • Working knowledge of MRP system, • Thorough knowledge of purchasing policies, processes, and procedure, • Must be a U.S. citizen or lawful permanent resident.Company DescriptionOur client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.Our client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.

Job DescriptionWe are looking for an experienced SAP MM Consultant to join our team in Brooklyn, New York. This is a Contract-to-permanent opportunity where you will play a key role in supporting and optimizing SAP S/4HANA Public Cloud solutions, particularly in the manufacturing sector. If you have a strong background in materials management and are passionate about driving process improvements, we encourage you to apply. Responsibilities: • Configure and manage SAP S/4HANA Public Cloud Materials Management (MM) functionalities to meet business needs., • Collaborate with stakeholders to implement Fit-to-Standard Public Cloud processes in alignment with industry best practices., • Partner with other module leads, including PP, SD, and WM, to ensure seamless integration across manufacturing and supply chain operations., • Support procurement, inventory management, vendor relations, and material planning within the S/4HANA Public Cloud environment., • Translate business requirements into scalable SAP solutions, minimizing custom developments., • Facilitate data migration, testing, and go-live activities to ensure smooth implementation., • Provide comprehensive training and documentation to end users to enhance system adoption., • Troubleshoot and resolve technical issues, ensuring system reliability and optimal performance., • Contribute to global rollout initiatives by applying knowledge of supply chain processes.• Minimum of 8 years of SAP MM experience, with at least 2–3 years in S/4HANA Public Cloud., • Strong understanding of manufacturing processes, especially in discrete manufacturing; experience in the aerospace industry is a plus., • Hands-on expertise with SAP Public Cloud Fit-to-Standard methodology., • Proficiency in global supply chain processes and the ability to support global rollouts., • Excellent communication and collaboration skills to work effectively with diverse teams., • Experience with related SAP modules, such as PP, SD, and WM, is highly desirable., • Prior involvement in S/4HANA Public Cloud greenfield implementations is a bonus.

Job Description Leading Aerospace Organization Is Growing and Looking for Motivated Persons to Join Our Team. Job Title: CNC Entry and Experienced / CNC Department Entry Level Pay: $25.42 To $26.59 Experience Level Pay: $26.59 To $30.13 Job Details: 8 Hour Shift Hourly Overtime Available Full-Time – 40 Hours / Week Benefits: Health Benefits 401k Yearly Raises Vacation Pay Holiday Pay Sick Pay Work Advancement Available Work Experience Requirements: Two (2) Years’ Experience in Cnc Setup and Machining. Able To Read and Understand Blueprints. Training Available. After Training, Able to Make Own Setups of Pre-Programmed Parts. Able To Work with Close Tolerances. Able To Perform Duties with Minimal Supervision Keeps Work Area Clean and Organized to Ensure Safety and Environmental Compliance. Education Requirements: High School Diploma or Equivalent Training. Job Description and Duties: Set Up and Run Production Jobs. Inspect And Verify First Piece of The Production Runs. Assist Engineering in Developing New Jobs. Observe Machine Operations to Detect Malfunctions or Out of Tolerance Machining. Perform Secondary Operations as Required. Kerns Manufacturing Corporation Is a Drug and Alcohol- Free Environment. Kerns Manufacturing Corporation Is an Equal Opportunity Employer.

Job Description Leading Aerospace Organization Is Growing and Looking for Motivated Persons to Join Our Team. Job Title: Lathe Entry and Experienced / Lathe Department Entry Level Pay: $25.42 To $26.59 Experience Level Pay: $26.59 To $30.13 Job Details: 8 Hour Shift Hourly Overtime Available Full-Time – 40 Hours / Week Benefits: Health Benefits 401k Yearly Raises Vacation Pay Holiday Pay Sick Pay Work Advancement Available Work Experience Requirements: Two (2) Years’ Experience in Lathe Setup and Machining. Experience In Threading and Grinding Preferred. Able To Read and Understand Blueprints. Training Available. After Training, Able to Make Own Setups. Able To Work with Close Tolerances. Able To Perform Duties with Minimal Supervision Keeps Work Area Clean and Organized to Ensure Safety and Environmental Compliance. Education Requirements: High School Diploma or Equivalent Training. Job Description and Duties: Set Up and Run Production Jobs. Inspect And Verify First Piece of The Production Runs. Assist Engineering in Developing New Jobs. Observe Machine Operations to Detect Malfunctions or Out-Of-Tolerance Machining. Perform Secondary Operations as Required. Kerns Manufacturing Corporation Is a Drug and Alcohol-Free Environment. Kerns Manufacturing Corporation Is an Equal-Opportunity Employer.

Job DescriptionBenefits: • 401(k), • Health insurance Position Summary: A well-established precision manufacturer in the aerospace and defense sector is seeking a Director of Quality to lead its quality management systems across casting, machining, and assembly operations. This leadership role is critical to ensuring compliance with industry regulations, driving continuous improvement, and maintaining the highest standards of quality in production. Key Responsibilities: • Develop, implement, and maintain a robust Quality Management System (QMS) aligned with AS9100, ISO 9001, and Nadcap standards., • Lead internal and external audits, customer quality interactions, and regulatory compliance initiatives., • Oversee dimensional and metallurgical inspection processes, including CMM, GD&T, and non-destructive testing., • Drive root cause analysis and implement corrective and preventive actions (RCCM, 8D, CAPA)., • Manage all First Article Inspection (FAI) and PPAP/APQP activities, including documentation under AS9012 and AS13002., • Collaborate with cross-functional teams (engineering, operations, supply chain) to improve process capability and product quality., • Analyze quality KPIs and initiate continuous improvement programs to reduce scrap, rework, and customer complaints., • Mentor and develop a high-performing team of quality engineers, inspectors, and technicians., • Role is on-site and not eligible for remote work.Qualifications:, • Bachelors degree in Engineering or a related technical field required; advanced degree a plus., • Minimum of 10 years of progressive quality leadership experience in aerospace, defense, or high-precision manufacturing., • Extensive knowledge of quality standards and regulatory frameworks: AS9100, ISO 9001, Nadcap, ITAR., • Experience managing audits and customer approvals (e.g., Boeing, Lockheed, Raytheon, Honeywell)., • Strong background in metrology, GD&T, and non-destructive testing., • Familiar with lean manufacturing, Six Sigma methodologies, and ERP systems.

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking an experienced and charismatic Senior Solutions Engineer for a critical customer-facing role. This role supports Sales by providing perspective, feedback, and sharing knowledge learned from the front lines of the aerospace and defense engineering and manufacturing community. This role is a unique blend of customer engagement, technical expertise, and project management. The Senior Solutions Engineering will report into the Pre-Sales Engineering community, which is dually led by Sales and Operations. This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a successful, experienced, team-focused engineer with digital fluency and a sincere enthusiasm about the aerospace industry, this could be the right role for you. Responsibilities: • Customer Engagement and Sales: • Partner with Account Executives to drive account growth and retention, • Discover, illuminate, digest, organize and execute major projects, • Join Account Executives in onsite visits with customers when appropriate, • Proactively identify and address potential manufacturing challenges (including DFM), • Stay informed about upcoming customer projects and initiatives to ensure alignment with Xometry's capabilities, • Gather customer insights and feedback to inform sales strategies • Pre-Sales Engineering: • Assist Pre-Sales Engineering with knowledge gathering, digestion, and ultimately compiling correct and competitive quotes, • Combine customer knowledge, Xometry partner knowledge, and Xometry system knowledge to rapidly address customer needs and shepherd projects to delivery, • 10+ years of relevant experience in aerospace and defense engineering and manufacturing roles, • A bachelor's degree in Mechanical Engineering is required, • Experience using Xometry's services from a customer perspective. Partner perspective is a bonus, • Deep familiarity with the methods, materials, culture and products of organizations such as Lockheed Martin, Northrop Grumman, Blue Origin, Anduril, General Dynamics, Moog, SpaceX, • Strong understanding of manufacturing principles, including drawings and GDT, • Particularly strong experience in CNC machining. Composites, Plastics, Harnesses and Sheet Metal Fab are bonuses, • Familiarity with ISO9001, AS9100d, ITAR, NIST and other common and critical compliance and certification requirements, • Excellent communication, interpersonal, and problem-solving skills. This must extend into remote/digital environments, • Ability to travel to customer and/or partner sites as needed. 25%-35% travel is typical, • Mountain or Pacific home time zone preferred, • Experience with CRM systems such as Salesforce, • Proficiency in Google Suite and Microsoft Office Suite #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job DescriptionAbout Us: Voyant Photonics, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. With Voyant, the next generation of machines can see, understand, and navigate the world like never before. Discover how we’re redefining what’s possible by making real products out of cutting edge research in silicon photonics. Why Join Us: As a growing company, we’re looking for engineers who want to move fast, solve hard problems, and leave their mark on a foundational technology. You’ll join a mission-driven team at the intersection of product design, silicon photonics and machine perception. Location: NYC Key Responsibilities: * Architect and develop analog and mixed-signal electronics for compact, high-performance hardware modules, using TIAs, ADCs, precision current sources, and power supplies like LDOs and switching regulators. * Own designs from concept through production, including schematic capture, component selection, and PCB layout in collaboration with layout engineers. * Ensure signal integrity, power integrity, and EMI/EMC compliance across high-speed and noise-sensitive interfaces. * Define and execute bring-up, characterization, and validation plans (e.g., DVT, EVT), with a focus on robustness, repeatability, and manufacturability. * Analyze design trade-offs (performance, cost, power, integration complexity) in the context of tightly constrained product architectures. * Partner closely with system architects, mechanical engineers, and firmware teams to ensure seamless integration and system-level reliability. Qualifications: * Experience: 7+ years in hands-on hardware development, with end-to-end ownership of systems that shipped at scale. * Execution: Demonstrated ability to deliver high-reliability designs under tight constraints on power, cost, form factor, and schedule. * Technical Strengths: * Deep expertise in low-noise analog and high-speed digital design. * Strong grounding in signal/power integrity, high-density interconnect, and EMI mitigation techniques. * Familiarity with high-volume design-for-manufacturing (DFM), reliability testing, and yield optimization. * Tools & Skills: * Proficient in schematic capture and simulation (e.g., SPICE), with working knowledge of Altium or similar. * Experience with SI/PI simulation tools (e.g., HyperLynx, SiWave) and measurement tools (GHz-range scopes, VNAs, spectrum analyzers). * Familiarity with board-level integration of FPGAs, microcontrollers, and custom analog ASICs. Preferred Qualifications: * Experience with high-speed ADCs, custom analog IC interfaces, or photonics-related electronics. * Knowledge of flex and rigid-flex PCB design. * Familiarity with Verilog-AMS or mixed-signal modeling. * Exposure to Verilog HDL or FPGA development. * Experience designing for high-reliability or harsh environments (e.g., automotive, aerospace). Benefits Package: * Competitive base salary and a meaningful equity package. * Comprehensive health benefits (Medical, Dental, Vision). * Unlimited PTO and paid company holidays. * Team events and company meetups. Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job Description Job Title: Regional Account Manager – The New Haven Companies, Inc. DBA New Haven Moving Equipment (Prefer candidate lives within 50 miles of Carlstadt, NJ) The New Haven Companies is seeking a dynamic and driven Regional Account Manager to manage and grow our business across New Jersey, New York, and Pennsylvania. This role will focus on maintaining an existing book of business while identifying and executing opportunities for growth. The ideal candidate will have minimum of 12 months experience in outside sales and a working knowledge of the Moving & Storage industry. The role is remote, with in-person customer visits and regional travel. Key Responsibilities: - Manage and grow an inherited portfolio of clients within the Moving & Storage industry. - Establish, maintain, and nurture strong relationships with existing & new customers. - Identify new business opportunities and expand market presence within the assigned region. - Handle pricing negotiations, order entry, and inventory management to meet customer needs. - Optimize delivery routes to ensure efficiency and timeliness of service. - Regularly update and report to the Senior VP of Sales on business performance and sales strategies. - Collaborate with cross-functional teams to resolve customer inquiries and improve service. Qualifications: - Minimum of 12 months outside sales experience, preferably in the Moving & Storage industry. - Knowledge of inventory management and pricing strategies. - Excellent communication and relationship-building skills. - Proven ability to manage multiple accounts and meet sales targets. - Ability to work independently and stay self-motivated in a remote work environment. - Strong organizational skills with attention to detail. - Ability to travel regionally, with a valid driver's license. Benefits: - Competitive salary with opportunity to earn commission based on performance. - Work-from-home setup, including a company-provided cell phone and laptop. - Car allowance and reimbursement for travel expenses. - Opportunities for professional growth within a fast-paced, dynamic industry Would you like to join our great team ? There are great ways to apply for a position with our company. 1)Text NHMECareers to 97211 to learn more 2) send your resume to email address below 3) Apply in person at the location New Haven Moving Equipment 355 Michele Place Carlstadt, NJ 07072 • Principals only. Recruiters, please don't contact this job poster. Company DescriptionCelebrating over a 114 Years of Service For over a century, New Haven has been a family business that greatly values our relationships with our customers and the integrity, durability and workmanship of our products. Our products combine innovative designs, engineering excellence and top-of-the-line components and are reflective of our years of experience in and dedication to the various industries we serve. New Haven is dedicated to providing you and your company with the highest quality CORRUGATED, PACKAGING, MOVING EQUIPMENT and CARGO CONTROL available in the market. We are excited for our over 105 years in the business, during which time we have served the Moving, Transportation, Entertainment, Aeronautics, Health, and Aerospace industries, as well as Government Agencies, Universities, Libraries, Museums, and Corporations. New Haven began with a single horse-drawn wagon However, no matter how technologically advanced we have become (we were the first ever company to utilize lasers in our manufacturing of Furniture Moving Pads and our Cargo Control is now employed in outer space), we still retain a personalized orientation with our customers and care about your individual success. We have Multiple fully-stocked locations to serve you across the country, with experts in moving and product engineering happy to assist you.Celebrating over a 114 Years of Service\r\n\r\n\r\nFor over a century, New Haven has been a family business that greatly values our relationships with our customers and the integrity, durability and workmanship of our products.\r\n\r\nOur products combine innovative designs, engineering excellence and top-of-the-line components and are reflective of our years of experience in and dedication to the various industries we serve. New Haven is dedicated to providing you and your company with the highest quality CORRUGATED, PACKAGING, MOVING EQUIPMENT and CARGO CONTROL available in the market.\r\n\r\nWe are excited for our over 105 years in the business, during which time we have served the Moving, Transportation, Entertainment, Aeronautics, Health, and Aerospace industries, as well as Government Agencies, Universities, Libraries, Museums, and Corporations.\r\n\r\nNew Haven began with a single horse-drawn wagon However, no matter how technologically advanced we have become (we were the first ever company to utilize lasers in our manufacturing of Furniture Moving Pads and our Cargo Control is now employed in outer space), we still retain a personalized orientation with our customers and care about your individual success. \r\n\r\nWe have Multiple fully-stocked locations to serve you across the country, with experts in moving and product engineering happy to assist you.

Job Description Job Title: Project Engineer Company: PTI Tech Location: Clifton, NJ (On-site) Industry: Manufacturing / Metal & Plastic Injection Molding Experience Level: Mid to Senior Level About PTI Tech PTI Tech is a leading provider of advanced manufacturing solutions, specializing in precision metal and plastic injection molding for the aerospace, medical device, industrial, and defense industries. We are growing our technical team and seeking a skilled and motivated Project Engineer to support innovative product and process development efforts. Position Summary PTI Tech has an immediate opening for a Project Engineer to support the design and development of new products, components, and advanced manufacturing processes. This position plays a key role in PTI’s R&D and production programs, working closely with the Engineering Manager and cross-functional teams. Responsibilities include initial concept design, 3D modeling, analysis, prototyping, process development, vendor coordination, and supporting the implementation of novel engineering solutions. The ideal candidate is passionate about mechanical design, manufacturing innovation, and automation. We’re looking for a hands-on engineer with strong problem-solving skills, project leadership experience, and the ability to work effectively in a fast-paced, team-oriented environment. Key Responsibilities Design & Development • Develop production processes, tooling, fixtures, and manufacturing cells with a focus on quality and repeatability., • Perform technical and requirements analysis, researching new materials, technologies, and processes., • Apply DFM to assess part moldability and recommend design improvements for injection molding (plastic, metal, ceramic)., • Lead engineering projects from concept through production, coordinating cross-functional teams and external partners., • Create and manage project timelines, task assignments, and deliverables., • Write detailed work instructions, set up manufacturing equipment, and establish standard operating procedures (SOPs)., • Design and implement automation processes to increase manufacturing efficiency and consistency., • Program and troubleshoot Universal Robots and Arburg robotic systems., • Design and develop custom end-of-arm tooling for robotic automation., • Integrate automation systems into production workflows and support new product introductions (NPIs)., • Support ongoing production by resolving technical issues and improving part quality., • BS or MS in Mechanical Engineering, Materials Science, or related field., • Proficiency in CAD design using SolidWorks., • 5+ years of experience in mechanical design and development of injection-molded or over-molded parts and assemblies., • Strong knowledge of DFM, injection molding (plastic/metal), tool and mold design, and automation integration., • Experience with machine shop processes: turning, milling, EDM, and CNC machining., • Fluent in interpreting engineering drawings and applying GD&T., • Strong project management and organizational skills., • Experience in aerospace, medical device, defense, or industrial sectors., • Familiarity with additive manufacturing., • Experience with process validation, lean manufacturing, and quality systems., • Program management experience is a plus. Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Manufacturing Engineer that is accountable for improving and maintaining first pass yield for specified parts and/or processes. This is accomplished by driving continuous improvement initiatives, process development/modification, documentation of standards/best practices, and equipment onboarding/troubleshooting. Candidate shall also support cross functional initiatives with Production, Quality and Purchasing departments to meet company goals and product quality standards. Scope of Responsibilities: • Troubleshooting of quality issues throughout the production process: welding, brazing, nickel plating, cleaning, and borescope inspection. Additional processes: bending., • Use continuous improvement and lean techniques to increase production efficiency, eliminate waste, and drive cost savings opportunities., • Support production staff with specification/technical knowledge, inspection techniques, weld/braze consumables management and day-to-day trouble shooting efforts., • Documentation and standardization of processes via work instructions and operating instructions to increase efficiency, facilitate cross-training and enable proper equipment usage., • Equipment and tooling on-boarding into production process to support new product, process efficiency, ergonomics or safety. Basic troubleshooting, light-level repair and/or export of orbital weld machines, orbital weld heads, steam cleaning machines, tungsten grinders etc., • Effective communication with production employees, management staff and cross-functional team to ensure the alignment of efforts to meet company goals., • Conduct classes and trainings to support continuous improvements efforts and product quality i.e. Visual Inspection and Back-to-Basics courses., • Manage operator qualifications to ensure production staff is qualified to perform given tasks, • Ability to work in a fast-paced, deadline-oriented team environment, • Ability to read, interpret, translate engineering drawings and customer specifications to drive compliance, • Excellent team player with a great attitude. Accountabilities • Support of Team Goals, Represent company as process expert, requisition tooling and equipment for processes., • Performance Measurement & Performance Evaluation., • Meet team quarterly objectives. Adherence to goals and behaviors associate with achieving them, • First pass yield, • Process compliance (welding, bending, brazing, chemical), • Project completion/execution, • Aging (units over lead-time)Qualifications, • Proven working experience as a manufacturing engineer or in a related field., • Experience in blueprint reading and spec interpretation., • Must be comfortable in a manufacturing environment often fast-paced and loud., • Must be able to stand, lift, walk, bend, and reach during their shift., • Must be comfortable wearing safety glasses., • Work well within a team., • Creative and innovative thinking skills., • Problem-solving skills. Additional Information Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionAbout NominalNominal is building the software infrastructure powering the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and enables engineers to iterate faster without sacrificing safety or precision. We’re a small, fast-moving team of engineers and operators who own problems end-to-end, work across disciplines, and thrive on challenges at the intersection of hardware and software.As a dual-use platform, we serve top-tier commercial and defense customers, including the U.S. Navy, United States Air Force, Shield AI, and Anduril. We’re backed by Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures. Our team draws experience from SpaceX, Palantir, Anduril, Applied Intuition, and other leading companies — united by a common mission: enabling hardware engineers to push the boundaries of advanced technology with speed, safety, and precision.In this pivotal role, you'll deliver Nominal’s vision of providing continuous testing to the industrial base, equipping engineers to deploy capability, at scale, in the shortest time possible. You’ll be working across accounts ranging from large enterprises to innovative startups, selling a modern software platform to hardware organizations. It’ll be your role to demonstrate and communicate how our technology fits into their existing stack and helps them meet their critical testing outcomes. You will also be counted on to shape the early sales team and its culture.\uD83D\uDE80 About the role • Solution scoping & collaboration — Collaborate deeply with Sales, Mission, Product, and Engineering teams to understand customer requirements, scope feasible solutions, and align on technical feasibility., • Customer discovery & advocacy — Gain holistic insight into customer pain points and feedback to understand and quantify ways Nominal can benefit; while also helping to refine Nominal’s roadmap and messaging., • Technical pre-sales excellence — Deliver persuasive, tailored demos, PoCs, and technical presentations, effectively communicating Nominal’s platform value to C-level executives, systems architects, engineering leads, testing managers, and IT stakeholders., • Customize & prototype — Design custom demo workflows, extensions, or integrations (e.g. data ingestion pipelines, automation scripts) that showcase how Nominal delivers real-world impact across ambiguous or edge-case scenarios., • Strategic opportunities — Partner with Account Executives to build account plans, identify internal champions, and navigate complex buying processes—including IT, compliance, and financial stakeholders., • Team enablement & knowledge sharing — Co-create battle cards, talk tracks, and technical collateral. Mentor junior team members and support the evolution of Nominal’s pre-sales methodology.\uD83D\uDD0D We're looking for someone with, • Proven experience: 5–10 years in technical pre-sales, solutions engineering, or sales engineering roles at high-growth enterprise software companies, ideally with exposure to aerospace, defense, or industrial customers. You’ve consistently partnered with Account Executives to close complex, multi-stakeholder deals, and can point to examples where your technical guidance directly enabled customer adoption., • Technical fluency — You’re deeply conversant in cloud infra and analytics tooling (AWS, Azure, Databricks, Snowflake, Influx, Grafana) and can speak confidently with engineers in hardware or systems domains., • Coding & data proficiency – You have expertise in coding with SQL, Python, and Pandas, as well as familiarity with Spark, Arrow, Kafka, Beam, and Flink., • Solution-selling mastery — You’ve successfully supported sales of technical platforms—ideally (but not necessary) in aerospace, defense, industrial automation, or manufacturing—and know how to integrate technical messaging into a compelling narrative., • Collaborative & customer-obsessed — You thrive when aligning cross-functionally and building trust with customers and internal stakeholders alike., • Adaptability & ownership — You flourish in dynamic, startup-like environments and can pivot quickly in ambiguous scenarios., • Travel readiness — Willing to travel ~25-50% to visit customer sites (e.g., manufacturing floors, test facilities, cleanrooms).⚡ Skills that supercharge us, • Demo creation and delivery: Ability to develop “outside-in” demo environments that start from the perspective of a target industry or vertical, design representative telemetry data and stories that illustrate Nominal’s value in real-world contexts, and showcase hardware test scenarios in front of executive and engineering audiences. [Insert], • In-field hardware mastery: Proficiency with hardware engineering tools such as DAQs, DDS, Nix, RTOS, MCAP, H5, TDMS, LabView, MATLAB/Simulink, and WinPlot., • Technical background or degree: Background in computer science, mechanical engineering, or other heavy industry✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional development stipend

Job Description Assembly is a fast-growing, venture-backed company with the ambition to transform the way we design and deliver imaginative, innovative urban architecture. We combine technology, design, architecture, and manufacturing to create mid/high-rise urban buildings that are greener and higher-quality, using a system that is faster and more efficient. As our pipeline grows and the system is refined, we unlock increasing cost efficiencies, ensuring long-term value for developers and the industry. As the Director of Manufacturing Engineering, you will define and implement the playbook for fabricating and assembling Assembly modular units within both existing and new manufacturing facilities. You and your team will codify the entire manufacturing process, ensuring that third-party factories can efficiently and precisely build our high-rise modules. This includes developing repeatable, scalable work instructions, designing transportable and reusable tooling, integrating digital manufacturing technologies, and serving as sustaining engineers to drive continuous improvement. While the goal is to scale through external partners, you must also be prepared to establish and manage temporary in-house assembly operations when necessary, requiring adaptability and strategic problem-solving. This role is essential to executing Assembly’s vision for distributed manufacturing, ensuring seamless integration between design, engineering, and production. You will be responsible for standardizing processes across third-party factories while also maintaining the technical and operational readiness to establish rapid-deployment assembly facilities when needed. Your leadership will ensure that every Assembly module is built with precision, efficiency, and consistency, regardless of location. You Will: Shape the future of industrialized construction by applying advanced manufacturing principles to an industry ripe for transformation. Design a first-of-its-kind manufacturing system that scales modular high-rise construction across multiple factories, integrating automation and digital workflows. Lead the convergence of aerospace- and automotive-grade manufacturing with building construction, developing processes that drive quality, efficiency, and scalability. Develop and implement a scalable manufacturing system that enables partner factories to efficiently fabricate and assemble modular units while maintaining the capability to launch in-house assembly operations when needed. Create a standardized manufacturing playbook, defining labor requirements, detailed work instructions, and quality control measures to ensure consistent production across multiple facilities Leverage digital manufacturing technologies (MES, ERP, and factory automation tools) to optimize assembly processes, monitor production quality, and drive operational efficiency. Lead process innovation and continuous improvement, acting as sustaining engineers to refine manufacturing workflows based on feedback from production partners. Establish and oversee pilot programs and first-article builds to validate new processes, tooling, and quality standards at partner facilities. Collaborate cross-functionally with supply chain, logistics, and design teams to seamlessly integrate manufacturability with design intent Define and track key performance indicators (KPIs) to measure production efficiency, scalability, and quality performance. Develop and lead a high-performing manufacturing engineering team, fostering a culture of trust, innovation, and professional growth. Work closely with executive leadership to align manufacturing strategies with overall business objectives while maintaining cost-effectiveness through Capex and Opex forecasting. Champion lean manufacturing principles in collaboration with partner factories, improving efficiency, quality, and cost-effectiveness at scale. You Have: Experience in high-precision, scalable manufacturing industries such as aerospace, automotive, or industrial equipment, with an interest in applying these skills to the built environment. A Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Aerospace Engineering, or a related discipline. 10+ years of experience in manufacturing engineering, process development, or production engineering in industries such as aerospace, automotive, or industrial manufacturing. The ability to think beyond traditional factory models and implement distributed, flexible manufacturing strategies that scale across multiple production sites. A background in designing and optimizing manufacturing processes for complex, large-scale products, with a focus on modularization and efficiency. Strong problem-solving skills with a systems engineering mindset—able to connect design, supply chain, production, and logistics into a seamless workflow. Experience designing transportable and reusable tooling and fixtures to optimize manufacturing efficiency and scalability. Proficiency with Manufacturing Execution Systems (MES), ERP systems, and digital factory tools, along with the ability to develop detailed work instructions and labor requirement documents for production teams. The ability to work with cross-functional teams, external suppliers, and manufacturing partners to drive scalable production solutions. You Are: A strategic planner and a hands-on operator, comfortable working in both partner-driven and in-house assembly environments. Capable of building and launching a rapid-deployment assembly facility. A clear communicator who can translate complex manufacturing requirements into actionable plans for both internal teams and external partners. Passionate about solving engineering challenges that blend digital and physical manufacturing, bringing industrialized processes to an industry in transformation. A manager of complex challenges with a solutions-oriented mindset, ensuring agility and efficiency in a rapidly evolving industry. A proven leader who leverages emotional intelligence and empathy to create an inclusive, high-trust work environment, enabling teams to perform at their best. Compensation Range: $170k- $250k / year Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills and experience. Equal Employment Opportunity (EEO) Statement Our company does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor. To Apply Submit: To apply, submit your application at the top of this page or visit our Careers Page.

Job Description Department: Quality Location: PTI Tech, Clifton NJ Reports To: Director of Quality Mission To uphold and advance the highest standards of quality across all stages of manufacturing—ensuring compliance with AS9100 and customer-specific requirements through robust documentation, risk management, and process validation. This role exists to proactively prevent quality issues, support internal and customer-facing investigations, and strengthen PTI’s reputation as a trusted partner for mission-critical components. Competencies – What This Person Must Be Standards-Driven: Understands and applies AS9100, ISO 9001, MIL-STD-1916 and customer-specific standards; ensures audits, validations, and ongoing operations meet all requirements. Root Cause Problem Solver: Leads investigations using 8D, 5 Whys, and Ishikawa methods to ensure sustainable corrective actions. Process Control Advocate: Uses SPC, PFMEA, control plans, and capability studies to ensure consistent, capable production. Metrics-Driven: Uses data analysis to monitor trends, reduce scrap, and eliminate recurrence of quality issues. Customer-Focused: Communicates clearly with aerospace, defense, and other high-stakes clients; drives issues to closure and delivers timely updates. Cross-Functional Collaborator: Partners with Engineering, Manufacturing, and Production teams to align on requirements, validate processes, and resolve issues quickly. Detail-Oriented: Manages documentation and compliance requirements with accuracy including FAIRs, PPAPs, CAPA records, SOPs, and quality alerts with full traceability. Self-Directed and Proactive: Takes initiative to identify and resolve quality risks without being prompted and with minimal supervision; follows through on actions with rigor and accountability. Key Responsibilities • Drive quality improvements through Gage R&R studies, Statistical Process Control (SPC), Six Sigma, and Lean Manufacturing tools., • Lead investigations into internal and external quality issues; document findings and ensure timely resolution., • Perform root cause analysis using structured problem-solving methods (8D, 5 Whys) and verify the effectiveness of corrective and preventive actions (CAPA)., • Coordinate timely responses to Supplier Corrective Action Requests (SCAR), Non-Conformance Reports (NCR), customer complaints, and quality-related queries., • Prepare and maintain First Article Inspection Reports (AS9102), Production Part Approval Process (PPAP-AS9145) documentation, and validation (IQ/OQ/PQ)., • Lead risk assessments (PFMEA) and develop control plans to mitigate quality risks., • Track and analyze defects and scrap data to identify trends and prioritize corrective actions., • Collaborate with manufacturing and engineering to improve processes and define inspection criteria., • Own inspection processes, including CMM (Zeiss – Calypso), OGP, and Keyence programming, as well as inspection fixture design (SolidWorks preferred)., • Oversee QC personnel training in partnership with manufacturing engineering to establish visual standards and develop work instructions., • Maintain SOPs, work instructions, inspection procedures, and training logs in compliance with AS9100., • ≥ 98% Quality Shipments, • ≥ 90% Gage R&R Pass Rate, • ≥ 1.33 Cpk for Stable Processes, • ≤ 3% Internal Scrap Rate on assigned processes, • ≥ 95% CAPA Effectiveness, • ≥ 95% On-Time Submission of FAIRs, PPAPs, SCAR’s, and CAPA’s, • Bachelor’s degree in Mechanical, Manufacturing, or a related Engineering field, • 3–5+ years of quality engineering experience in injection molding or precision manufacturing, • Working knowledge of AS9100, ISO 9001, and MIL-STD-1916, • Experience with FAIR, PPAP, SPC, PFMEA, control plans, and CAD (SolidWorks preferred), • Proficiency in statistical tools (Minitab, JMP, Excel) and QMS/ERP systems, • ASQ Certified Quality Engineer (CQE) or Six Sigma certification, • Experience in the defense, aerospace, or medical device industries, • Hands-on inspection experience, including CMM, optical, or non-contact methods, • Ability to stand and walk on the production floor for extended periods, • Capable of lifting up to 40 lbs and accessing production and inspection equipment, • Manual dexterity for handling tools, parts, and inspection equipment, • Visual acuity sufficient to read prints, inspect parts, and identify quality defects, • Manufacturing facility with exposure to injection molding machines, CNC equipment, and secondary operations, • Requires use of PPE, including safety glasses, gloves, and hearing protection, • Frequent collaboration with production, maintenance, and engineering teams on the floorCompany DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job DescriptionAbout Voyant Photonics Voyant Photonics is redefining machine perception with compact, high-performance LiDAR devices that fit in the palm of your hand. Leveraging cutting-edge silicon photonic chips, our sensors deliver unparalleled accuracy in range, velocity, and reflectivity, at a fraction of the cost of traditional LiDAR systems. By transforming high-precision sensing into an accessible technology, we are enabling new applications in robotics, autonomous systems, industrial automation, and beyond. At Voyant, we are not just building products, we are advancing an industry. Our breakthrough technology bridges the gap between research and real-world deployment, making high-performance LiDAR scalable and commercially viable. The Role At Voyant Photonics, we are redefining the future of LiDAR, and we’re looking for a visionary Vice President of Engineering to lead that charge. In this role, you’ll guide our world-class engineering and test teams as we scale from breakthrough research into structured, repeatable production, transforming innovation into reliable, customer-ready products. You will be the senior, hands-on technical leader responsible for driving the transition from prototype to mass production, ensuring our products are not only innovative but also manufacturable, reliable, and scalable. The ideal candidate combines deep technical expertise in hardware and systems engineering with a proven record of delivering precision-engineered products at scale. You have led production ramp-ups through contract manufacturing and supply chain partnerships, ideally within complex, high-performance sectors such as automotive, robotics and industrial automation, smart infrastructure, AR/VR, consumer devices, or LiDAR, but we’re open to others, too. You will lead a multidisciplinary team spanning mechanical engineering, electronics, optics, firmware, and software, while working closely with the leadership team to align technology development with business objectives. Beyond the lab, you’ll engage with customers, partners, and investors, serving as a key technical voice in shaping our roadmap and driving adoption. Your role as visionary leader and your knowledge of LiDAR technology will make a difference in the capability to bring cutting-edge innovations to the mass market. You won’t just lead engineering execution, you’ll help set the standard for an entire industry. This is a rare opportunity to build, scale, and innovate at the frontier of photonics and LiDAR technology. What we’re building has never been done before. The world has been waiting for what we’re creating, a new class of machines that can see and understand the world with unprecedented accuracy and scalability. Through our novel design and system-level innovation, we’re unlocking a future where intelligent perception is no longer a limitation, but a foundation for what comes next. Location: New York City, NY (on-site). We offer relocation assistance and are flexible in supporting your transition to New York City. Key Responsibilities * Own and drive hardware engineering across electronics, mechanical assembly, optics, and embedded systems to deliver scalable, high-performance LiDAR solutions. * Lead the transition from R&D and prototyping to full-scale mass production, ensuring reliability, cost-effectiveness, and manufacturability. * Ensure engineering deliverables are aligned with product requirements and customer needs. * Develop and implement best-in-class engineering processes, including requirements management, design validation, and rigorous product lifecycle management. * Drive system-level technical decisions on engineering tradeoffs, balancing performance, manufacturability, cost, and timelines * Build and develop a cross-disciplinary engineering team to bring a first-of-its-kind product to market * Manage production ramp-up, scaling from low-volume sample assembly to 1,000+ units per month through contract manufacturing. * Drive technical alignment with the product roadmap, balancing innovation with execution and delivery timelines. * Collaborate with leadership across product, sales, and operations to ensure alignment between technical and business objectives. Required Qualifications * 10+ years of experience leading engineering teams in hardware and software product development. * Proven track record of shipping complex electronic hardware at scale. * Experience in development, testing and validation of LiDAR sensors. * Experience in high-volume product development at an established company (consumer electronics, automotive, robotics, or similar). * Expertise in contract development and manufacturing, outsourcing and offshore supply chains. * Strong leadership skills with the ability to inspire, mentor, and grow a world-class engineering team. * Proven track record of large, multidisciplinary teams management delivering technology to mass production. * Deep technical knowledge in system architecture, hardware design, and embedded software. * Experience driving New Product Introduction (NPI) and scaling production lines. * Bachelor’s or Master’s degree in Engineering or a related field. Preferred Qualifications * Experience with high-reliability or extreme-environment design (e.g., automotive, aerospace, defense). * Familiarity with functional safety standards (ISO 26262, IEC 61508, or similar). * Background in photonics, optics, or semiconductor-based sensing technologies. * Prior experience leading engineering at an early-stage startup, scaling from prototype to mass production. Compensation & Benefits * Competitive salary and meaningful equity package * Comprehensive health benefits (Medical, Dental, Vision) * Unlimited PTO and paid company holidays * Flexible work environment (Hybrid or remote with travel) * Team events and company meetups Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job DescriptionDescriptionThe Manufacturing Engineering group at Knowles Precision Devices is responsible for process engineering, yield improvement and new process introduction. The Knowles Thin Film Product Line includes RF and microwave components and custom built substrates for applications in telecom, aerospace and defense markets. This position is a hands-on engineering role with project management responsibilities for an experienced engineer in solving complex problems, while providing support to operations through improving yield, improving the flow of parts and implementing new equipment. This is a fast paced position, working on parallel projects that requires time management to support short term and long term needs of the company. Salary and title dependent on experience. Key Responsibilities • Participate in, organize and run yield improvement projects, relying on knowledge of processes, systems of systems, and LSS methodologies in support of organizational goals, • Work with multi-disciplinary (materials, chemistry, mechanical, RF, electronics) and cross-functional (operations, engineering, QA, CI) teams, • Run equipment, processes and experiments in an operational environment, • Collect and analyze data on yield and process capability, • Update and develop operations documentation (WI/JI) for existing processes and new processes, • Participate in Material Review Board (MRB) and Failure Review Board (FRB) for Root Cause investigations, • 7+ years’ experience supporting manufacturing in process engineering, QA or continuous improvement roles., • 3+ years’ direct experience with semi-conductor or thin film processes such as: Photolithograpy, electrolytic and electroless plating, Sputter, CVD or other vacuum deposition, Plasma etching, or die singulation, • Bachelors of Science in engineering or science, or equivalent experience, • Experience with statistical methods (DOE, SPC, FMEA) and data analysis tools (e.g., JMP, Minitab, MATLAB, Python, SQL), • Experience reading and understanding CAD engineering drawings using GD&T, • Experience measuring and validating workmanship to drawing specification, • Experience authoring job instructions and work instructions, • Strong written and verbal communication skills, communicating to both operators and management, • Willingness to train others and work as a member of inter-disciplinary teams, • Leadership or supervisory experience a plus, • Project management experience; certification a plus, • Must be able to perform lab duties in an ISO certified clean room, meeting gowning, ESD, and EHS requirements., • Medical, dental and vision insurance plans, • Prescription Drug Plans, • Basic Life Insurance, • 401k plan with company match, • Tuition Reimbursement Program, • Security Clearance Incentive Program, • Employee Referral Program, • Flex PTO and NYS Sick and Safe Leave, • Paid HolidaysExciting Onsite Perks:, • Free Starbucks coffee available at our café, • Free access to our Fitness Center, • Fresh food is available for purchase in the cafeteria store. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

Job DescriptionDescriptionThe Process Engineering group at Knowles Precision Devices is responsible for supporting and maintaining the flow of production material for the Thin Film Product Line. The Knowles Thin Film Product Line includes RF and Microwave components for applications in telecom, aerospace and defense markets. This position is a hands-on engineering role, providing daily support to operations to maintain the flow of parts, implementing new equipment and supporting a range of improvement projects. This is a fast paced position, that expects time management to support short term and long term needs of the company. Salary and title dependent on experience. Key Responsibilities • Maintain and develop Job Instructions and Work Instructions for existing and new processes, • Collect and analyze data on yields and process capability, • Provide technical skill training to operators, • Provide process support to minimize production down-time in assigned areas, • Participate in project based teams, • Support equipment troubleshooting and maintenance, • Participate in Material Review Board (MRB) for Root Cause investigations, • May support contract review and process rulebook maintenance, in support of new product designs, • 3+ years of experience supporting laser drilling/cutting equipment in a manufacturing environment, • Bachelors of Science in engineering/science, or equivalent experience, • Experience reading and understanding CAD engineering drawings using GD&T, • Experience measuring and validating workmanship to drawing specification, with optical measurement devices, • Ability to generate machine motion control programs (i.e. G-Code), • Experience authoring job instructions and work instructions, • Proficiency in statistical methods (DOE, SPC, FMEA) and data analysis tools (e.g., JMP, Minitab, MATLAB, Python, SQL), • Strong written and verbal communication skills, communicating to both operators and management, • Willingness to train others and work as a member of inter-disciplinary teams, • Must be able to perform lab duties in an ISO certified clean room, meeting gowning, ESD, and EHS requirements., • Medical, dental and vision insurance plans, • Prescription Drug Plans, • Basic Life Insurance, • 401k plan with company match, • Tuition Reimbursement Program, • Security Clearance Incentive Program, • Employee Referral Program, • Overtime opportunities, • Alternate work schedules available, • PTO (10 days) and NYS Sick and Safe Leave, • Paid HolidaysExciting Onsite Perks:, • Free Starbucks coffee available at our café, • Free access to our Fitness Center, • Fresh food is available for purchase in the cafeteria store. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

Job Description About the Company Our client is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. They are on a mission to create a limitless source of zero emission energy for a sustainable future. This is a direct hire, permanent placement position for a client of AdAstra Talent Advisors. About the RoleOur client is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting ("HTS") magnets. HTS magnets are foundational components of the company's planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you'll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Responsibilities • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersRequirements, • At least a bachelor's degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • 5-10+ years of relevant experience, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one's own, • Full-time, on-site positionBenefit Highlights, • Competitive salary, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • Open vacation policies, • Work-life balanceCompensation is determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. Equal Opportunity Our client is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. About AdAstra AdAstra Talent Advisors is a headhunting and talent advising firm focused on the Climate, Space, and Defense sectors of Hard Tech. We specialize in pairing highly technical and executive talent with some of the world’s leading Hard Tech startups. At AdAstra, we catalyze the innovations that future generations depend on by placing the right people in the right seats. Our dedicated work enables inconceivable technology from Earth, to the stars. And it’s all because of trailblazing talent like you - those driven to do what’s never been done before. We care about long term relationships with both candidates and companies. Even if the role we initially discuss isn’t a perfect fit, it’s likely we’ll have something relevant to share with you in the future. Join us on our journey by following along via LinkedIn! CEO, Seyka Mejeur | LinkedIn profile CTO / COO, Brian Mejeur | LinkedIn profile AdAstra Talent Advisors | LinkedIn profile AdAstra Website

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated manufacturing engineers to join its rapidly growing team. The Manufacturing Engineering role will develop and implement processes, tooling, and equipment necessary to manufacture and test high temperature superconducting (“HTS”) magnets. This role will also help establish the foundations of Process Engineering and Quality Engineering at Thea Energy as we build and commission a magnet manufacturing and test facility. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibilities: • Generate documentation for the manufacture of HTS magnets, including processes and procedures, work instructions, and quality criteria, • Design, build, and commission magnet manufacturing tooling and equipment, • Work iteratively with magnet engineers to incorporate design for manufacture and lessons learned, • Develop and implement virtual and physical inventory management and manufacturing BOMs, • Generate specifications for and collaborate with vendors to procure hardware that meets quality specifications, • Define roles for and coordinate onboarding of manufacturing technicians, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersQualifications:, • Experience with first encounters of complex hardware assemblies, • Experience scaling from first-of-a-kind to continuous production, • Experience generating and interpreting manufacturing drawings, particularly GD&T, • Experience with fusion processes, including soldering, brazing, and welding, • Experience with planning and execution software including PLM, MRP, and inventory management, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in mechanical engineering, manufacturing engineer, or related field, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $100,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionSenior Quality Engineer Senior Quality Engineer Salary: $110k - $140k base, Benefits, PTO, 401K Requirements: GD&T experience within Aerospace/Defense. Nadcap preferred. Position Overview For nearly 100 years, we have been manufacturing high-precision and geometrically complex parts in the Aerospace industry. Due to growth we are actively hiring Senior and Mid-level Quality Engineers. Key Responsibilities • Develop and implement quality control processes to ensure compliance with AS9100, ISO 9001, and other relevant standards., • Conduct quality audits and assessments to identify areas for improvement and ensure adherence to quality standards., • Analyze data from inspections and tests to identify trends and implement corrective actions as necessary., • Work with engineering and production teams to design and improve processes that enhance product quality., • Lead and mentor junior quality engineers and quality technicians in best practices and quality methodologies., • Utilize GD&T and metrology techniques to ensure accurate product specifications and tolerances., • Oversee non-destructive testing (NDT) processes to ensure product integrity and compliance with industry regulations., • Bachelor's degree in Engineering or a related field., • 5+ years of experience in quality engineering, preferably in the aerospace or defense industries., • Strong knowledge of GD&T, AS9012, AS9100, ISO 9001, and related quality standards., • Experience with APQP, PAPP, CMM, RCCM, and NADCAP requirements., • Familiarity with non-destructive testing methods and metallurgical inspection processes., • Proficient in using quality tools and methodologies, including statistical process control and root cause analysis., • Excellent problem-solving skills and attention to detail., • Health, Dental, and Vision insurance, • PTO, • 401K with match, • Bonus - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 10/09/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionAbout Nominal Nominal is building the software infrastructure powering the world’s most advanced hardware systems — from spacecraft and autonomous vehicles to next-generation industrial machines. Our platform ingests high-rate telemetry, validates complex autonomy software in real time, and enables engineers to iterate faster without sacrificing safety or precision.We’re a small, fast-moving team of engineers and operators with deep experience from companies like SpaceX, Palantir, Anduril, and Applied Intuition. We’re backed by Sequoia, General Catalyst, Founders Fund, Lux Capital, and Lightspeed Ventures — and we serve a range of top-tier commercial and defense customers, including the U.S. Navy, Air Force, Shield AI, and Anduril.At Nominal, we enable hardware engineers to push the boundaries of technology — with speed, safety, and precision. As an Area Director, you’ll play a critical leadership role in driving Nominal’s go-to-market success. You'll be on the front lines of selling a modern software platform into hardware-centric organizations from aerospace to defense to industrial automation.This is not a traditional SaaS sales role. You’ll own complex, high-value enterprise deals, build deep technical relationships, and guide customers through a sophisticated solution-selling journey. You’ll also help build the foundation of our sales team and culture, contributing to our overall sales strategy and operating model.\uD83D\uDCBC What You'll Do • Own the Team Build and recruit a high performing team focused on pipeline generation, value driven discovery and closing Guide deals from initial outreach to signed contract, aligning stakeholders at every level., • Build the Relationship Engage with technical buyers, executives, and frontline engineers alike. Host executive dinners, attend key industry events, and stay tapped into your customers' priorities and challenges., • Craft the Strategy Develop strategic account plans that target first-mover programs, then expand across the enterprise. Understand the internal dynamics and identify champions who will advocate for Nominal., • Sell to Outcomes Frame our value in terms of customer outcomes — speed, safety, and deployment scale. You’ll translate complex engineering goals into a compelling software value proposition., • Partner Effectively Leverage the broader Nominal team — from engineering to operations — to support technical discovery, demos, integration scoping, and infosec reviews. Collaborate cross-functionally to deliver tailored collateral and messaging., • Maintain the Forecast Own a robust book of business, tracking long-lead opportunities and delivering accurate, data-driven forecasts that align with company goals., • Build the Team Help define what “great” looks like for our sales function. Mentor early hires, shape sales processes, and build a winning, ownership-oriented culture.\uD83D\uDD0D What We’re Looking For, • Enterprise Sales Experience 3+ years of experience in Leadership, particularly in enterprise or strategic sales, ideally closing seven-figure technical deals into industrial, defense, or hardware-centric companies., • Solution Seller You’re a consultative, outcome-oriented seller who thrives in multi-stakeholder environments. You know how to pull together the right internal team to win., • Technical Fluency You’re comfortable speaking to engineers, architects, and IT leaders. Bonus if you’ve sold into environments with complex telemetry, testing workflows, or autonomy software., • Relationship-Driven You build lasting, trust-based relationships. You understand customer org charts, incentive structures, and how to align stakeholders., • Industry Familiarity You’ve sold data, infrastructure, or developer platforms into industrial/manufacturing, aerospace, defense, or heavy industry. You know how these companies operate., • Leadership & Team Player You lead by example and lift up those around you. You’ve mentored other sellers and are excited to help build a high-performance sales org., • Ready to Roll You’re energized by travel, on-site demos, and face-to-face meetings. You’re hands-on and biased toward action.⚡️ Skills That Supercharge Us, • CRM & Sales Stack Fluency: HubSpot, Salesforce, LinkedIn Sales Navigator, ZoomInfo, Common Room, Notion, Slack, • Technical Tools Familiarity: AWS, Azure, Databricks, Snowflake, MATLAB, Grafana, • Data Proficiency: SQL, Python, Pandas, Timescale, Spark, Kafka, Beam, Flink, • Engineering Background: Degree or experience in mechanical engineering or similar field✨ Benefits/Perks, • \uD83C\uDFE5 100% coverage of medical, dental, and vision insurance, • \uD83C\uDFD6️ Unlimited PTO and sick leave, • \uD83C\uDF7D️ Free lunch, snacks, and coffee, • \uD83D\uDE80 Professional Development Stipend

Job Description Leading Aerospace Organization Is Growing and Looking for Motivated Persons to Join Our Team. Job Title: Milling Entry and Experienced / Milling Department Entry Level Pay: $25.42 To $26.59 Experience Level Pay: $26.59 To $30.13 Job Details: 8-Hour Shift Hourly Overtime Available Full-Time – 40 Hours / Week Benefits: Health Benefits 401k Yearly Raises Vacation Pay Holiday Pay Sick Pay Work Advancement Available Work Experience Requirements: Two (2) Years’ Experience in Milling Setup and Machining. Experience In Operating Bridgeport’s, Jig Bores, Drill Press, Etc. Able To Read and Understand Blueprints. Training Available. After Training, Able to Make Own Setups. Able To Work with Close Tolerances. Able To Perform Duties with Minimal Supervision. Keeps Work Area Clean and Organized to Ensure Safety and Environmental Compliance. Education Requirements: High School Diploma or Equivalent Training. Job Description and Duties: Set Up and Run Production Jobs. Inspect And Verify First Piece of The Production Runs. Assist Engineering in Developing New Jobs. Observe Machine Operations to Detect Malfunctions or Out-Of-Tolerance Machining. Perform Secondary Operations as Required. Kerns Manufacturing Corporation Is a Drug and Alcohol-Free Environment. Kerns Manufacturing Corporation Is an Equal-Opportunity Employer.

Job Description LEADING AEROSPACE ORGANIZATION IS GROWING AND LOOKING FOR MOTIVATED PERSONS TO JOIN OUR TEAM. Job Title: DEBURR ENTRY AND EXPERIENCED / DEBURR DEPARTMENT Entry Level Pay: $18.60 TO $24.09 Experience Level Pay: $24.09 TO $25.52 Job Details: 8 Hour Shift Hourly Overtime Available Full-Time – 40 Hours / Week Benefits: Health Benefits 401K Yearly Raises Vacation Pay Holiday Pay Sick Pay Work Advancement Available Work Experience Requirements: ONE (1) YEAR EXPERIENCE IN METAL PARTS FINISHING AND DEBURRING. EXPERIENCE IN HAND FINISHING OF PRECISION METAL PARTS A PLUS. ABLE TO READ AND UNDERSTAND BLUEPRINTS. TRAINING AVAILABLE. BE FAMILIAR WITH MANUAL HAND TOOLS AND MACHINERY AS NECESSARY. Able To Perform Duties with Minimal Supervision Keeps Work Area Clean and Organized to Ensure Safety and Environmental Compliance. Education Requirements: High School Diploma or Equivalent Training. Job Description and Duties: SET UP AND RUN PRODUCTION JOBS. UNDERSTAND AND DETERMINE HOW MUCH MATERIAL TO REMOVE. INSPECT AND VERIFY FIRST PIECE OF THE PRODUCTION RUNS. ASSIST ENGINEERING IN DEVELOPING NEW JOBS. ENSURE PARTS ARE FREE OF BURRS AND IMPERFECTIONS. PERFORM SECONDARY OPERATIONS AS REQUIRED. Kerns Manufacturing Corporation Is a Drug and Alcohol-Free Environment. Kerns Manufacturing Corporation Is an Equal Opportunity Employer.

Aerospace Engineer Job Duties: Contributes to the design, manufacturing, and testing of aircraft and aerospace products. Evaluates designs with regard to engineering principles, customer requirements and e

This role involves programming, setting up, and operating CMMs for quality inspection of parts produced on CNC machines, ensuring that all parts meet the exacting standards required for aerospace and defense manufacturing. If you have at least 3 years of experience in CMM programming and have worked

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance Position Overview The Quality Assistant will provide direct, hands-on support to ensure that all products meet the required quality standards for defense and manufacturing operations. This role focuses on practical inspection, testing, and documentation tasks on the production floor. The ideal candidate will work closely with operators, supervisors, and the Quality Control Manager to verify product conformity, identify non-conformances, and support continuous improvement of production processes. Key Responsibilities Inspection and Testing Perform in-process and final inspections of mechanical and electrical assemblies using measurement tools (calipers, micrometers, gauges, etc.). Verify compliance with engineering drawings, specifications, and customer requirements. Conduct sample checks, visual inspections, and functional testing as needed. Document inspection results in ERP and quality logs with high accuracy. Quality Process Support Support root cause investigations by providing inspection data and observations from the shop floor. Assist in preparing non-conformance reports (NCRs) and tracking corrective actions. Verify reworked or repaired items meet acceptance criteria before release. Maintain proper identification, segregation, and documentation of defective materials. Technical Documentation & Compliance Ensure all inspection records, traveler sheets, and logs are filled correctly and filed in compliance with ISO, ITAR, and AS9100 requirements. Assist in preparing documentation for internal audits and customer inspections. Follow and enforce quality standards, safety requirements, and lean manufacturing practices. Production & Shipping Interface Coordinate with production supervisors to ensure timely inspections without delaying workflow. Support final quality checks before products are released to shipping/receiving. Monitor and record product quality trends to support continuous improvement efforts. Qualifications Education: Minimum Associate Degree required (Bachelors or equivalent technical degree is preferred). Experience: 2+ years in quality control, inspection, or manufacturing environment (defense/aerospace preferred). Hands-on experience with inspection tools and gauges. Knowledge of ISO 9001, AS9100, or similar quality management systems is desirable. Familiarity with ERP systems for quality recording. Strong attention to detail, technical mindset, and ability to work independently on the production floor. Good communication skills for interacting with operators, engineers, and managers.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description Overview PTI Tech is a leader in precision injection molding, specializing in both metal (MIM) and polymer components for mission-critical applications in aerospace, defense, medical, and industrial sectors. With over 36 years of innovation and excellence, we pride ourselves on delivering high-performance solutions that meet the most stringent industry standards. We are seeking a Junior Sales Engineer to join our dynamic team. This role plays a key part in supporting the quoting and sales process—interpreting technical drawings, developing accurate quotes, and ensuring smooth internal handoff if a project is awarded. The ideal candidate will work closely with Sales, Engineering, and Operations to align client needs with our capabilities. In addition to standard quoting, this role requires occasional ownership of more complex government proposal submissions. When those opportunities arise, the Junior Sales Engineer is expected to take the lead in preparing and submitting complete and compliant packages. Proficiency with AI tools to streamline quoting, documentation, and proposal development is essential. This is a growth-oriented role with multiple potential paths into engineering, sales, or operations. The expectation is to spend 3–5 years in this position while gaining exposure to different areas of the business. Roles & Responsibilities • Quote & Proposal Support, • Manage incoming RFQs and generate accurate, timely quotes in coordination with Sales, Engineering, and Operations., • Interpret technical drawings (including GD&T) and specs to support cost estimation and manufacturability reviews., • Understand various manufacturing methods (e.g., injection molding, additive manufacturing, MIM, machining) to recommend best-fit approaches., • Format and prepare professional, client-facing proposal documents, • Sales Process Support, • Maintain organized quote tracking in CRM and internal systems, ensuring accuracy of part numbers, customer names, and status., • Follow up on outstanding quotes, gather feedback, and assist the sales team in advancing opportunities., • USG Proposal Ownership, • Own the process for more complex government or military proposal submissions as needed., • Use AI tools to support writing, formatting, compliance checking, and document compilation., • AI-Enabled Efficiency, • Leverage AI tools to accelerate quoting, extract data from technical files, and improve proposal quality, • Contribute ideas for improving sales and proposal workflows through digital tools and automation., • Cross-Functional Collaboration & Project Handoff, • Coordinate with Engineering, Tooling, Production, and Quality teams to ensure quoting assumptions are feasible., • Assist in the transition of awarded jobs into production by communicating quote assumptions and technical requirements., • Technical Literacy – Reads and interprets technical drawings (incl. GD&T) and understands core manufacturing methods including injection molding, additive manufacturing, machining, and MIM., • Quote Development Accuracy – Consistently produces technically and commercially accurate quotes., • AI Tool Proficiency – Uses AI to improve productivity, quoting speed, and proposal quality., • Communication Skills – Clearly articulates information across teams and to clients., • Sales Process Support – Understands how to manage and move opportunities through the quoting pipeline., • Client Focus – Maintains professionalism, responsiveness, and a solution-oriented approach., • Organizational Skills – Manages multiple tasks, RFQs, and proposals in a timely, accurate manner, • Cross-Functional Collaboration – Coordinates well across departments to align internal and client needs., • Problem Solving – Identifies and resolves issues in RFQs or specs during the quoting process., • Quote Turnaround Time – 90% of standard quotes delivered within 3 business days, • Quote Accuracy Rate – 95% of submitted quotes require no major rework, • Proposal Completion Rate (USG/Complex Projects) – 100% of assigned proposals submitted on time, • CRM & Quote Log Consistency – 100% of quotes logged and updated within 1 business day, • Handoff Completeness Score – 90% of awarded quotes transitioned with full documentation to production, • B.S. in Mechanical, Industrial, or Manufacturing Engineering preferred, • 1–2 years of relevant experience (internships, co-op, or full-time), • Comfortable reading engineering drawings, including GD&T, • Exposure to or interest in injection molding, additive manufacturing, machining, or metalworking processes, • Familiarity with ERP systems and CRM tools a plus, • Strong attention to detail, time management, and follow-through, • Interest in leveraging AI tools to improve productivity, • Strong communication and client-facing demeanorCompany DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Manufacturing Engineering Manager Location: Fairfield, NJ Direct Hire | Salary: $130,000 – $140,000 (DOE) We are seeking an experienced Manufacturing Engineering Manager for a direct hire opportunity with our client in Fairfield, NJ. This leadership role oversees engineering, manufacturing, and fa

Prior experience working in a food, pharmaceutical, cosmetic, or related hi-speed type of manufacturing company Minimum of at least 3+ years’ experience in Plant Management in a manufacturing facility as above described is highly preferred If qualified, please forward your resume to: JillR@AplusPe

Job Title: Engineering Associate Location: South Plainfield, NJ Type: Contract-to-Hire Work Model: Onsite Pay Range: $25–$27/hour ENGINEERING ASSOCIATE SUMMARY: This position focuses on process optimization, maintaining production quality, and supporting operator training in a cleanroom/fab enviro

Job Summary This position is responsible for planning, scheduling, and coordinating preventive maintenance, calibration activities, and spare parts management to support uninterrupted production and regulatory compliance.Job Description Responsibilities: Check and inspect all production machinery an

Clean and set up manufacturing/packaging equipment. Qualifications: Must be able to successfully pass a respirator fit test to wear periodically Prior Pharma packaging experience required Ability to be gowned for manufacturing – wear safety glasses, hearing protection, full face/half mask respirat

Moldmaker Congers, NY The primary mission of the Mold Maker under limited supervision, performs a variety of operations to construct, repair or maintain in-house molds/tooling.Assignments may require the use of ordinary tool room equipment and/or outside tooling suppliers and sub-contractors.This po

Job Title: Senior Materials Engineer Location: Mahwah, NJ Hours/Schedule: 8:00am to 5:00pm Compensation: $53.Type: Contract Responsibilities Develops and modifies process formulations, methods and controls to meet quality standards.Recommends and implements improvements, modifications or additions t

Prior assembly experience in a manufacturing environment required.

Manufacturing Engineer Needed For Leading Aerospace Manufacturer. As they continue to grow, they have asked us to help in finding a Manufacturing Engineer tp join their team.

Plastic Part Design-Process Engineer - Cheltenham, NJ Plastics Engineer Process Engineer Manufacturing Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset _. Use product analysis to recommend changes to product to better suit

This position will primarily be an outbound shift, Monday–Friday, from 12:00 PM to 10:00 PM.Flexibility is required to cover or train on inbound operations as needed, which runs 1:00 AM to 11:00 AM, Monday–Friday.What you’ll need to succeed as a Freight Operations Manager at XPO Minimum qualif

Train new employees, Operators, and Junior Mechanics on manufacturing techniques and procedures as directed by supervision. At least 3 years of experience in a manufacturing environment. What We are Looking For: Comply with current Good Manufacturing Practices (cGMP).

Citizen with the ability to communicate clearly in English.Only local NJ/NYC area people will be considered.Must reside within commuting distance of the Whippany New Jersey area.To qualify for this position you need to have experience with Panel Wiring, PLCs.HMI, Motor Drives, Control Systems, Varia

Aerospace Engineer Job Duties: Contributes to the design, manufacturing, and testing of aircraft and aerospace products.

Manufacturing engineering should be at.

As a Navy Fighter Pilot, the sky is your domain.You'll be part of an elite group of aviators who fly and fight in the world's most lethal jets-all from the deck of an aircraft carrier.To do this job well, you'll need critical thinking skills, unshakeable determination and the will to persevere throu

Manufacturing Manager Needed For Leading Contract Manufacturing Company. Understanding of ERP or other manufacturing software, preferably with Oracle manufacturing systems. My client is a leading contract manufacturer who is rapidly growing! They are looking to add a Manufacturing Manager to their t