Trabajos airport operation en New Brunswick, New JerseyCrear alertas

Job Description Date 11/2020 Location 1300 Airport Road, North Brunswick NJ Title Operator, Granulation/ Blending Operator 1 Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Granulation/Blending Operator is responsible for the operation and set up of granulators, drying oven, blenders, screening equipment etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Train in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Fluid bed dryer/processor, • Tray Drying Ovens, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screening/ sieving equipment, • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Other duties as assigned Other Responsibilities Including Safety: • N/A Requirements Education & Qualification: • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 6-12 months experience, • Operates blending, screening & milling machines., • Must be proficient in proper setup and operation of blenders Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. 1st shift - 7:00 AM to 3:30 PM

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Compression & Encapsulation Department Standard Manufacturing Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Compression and Encapsulation Operator is responsible for the operation and set-up of tablet compression machines and set-up of automatic capsule filling machine in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Operator is accountable for overall production line performance including safety, quality, shrink, attainment, and line efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility Level 1 • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to identify and report to the team lead or supervisor troubleshoot product issues., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Performs all other duties as assigned by immediate supervisor Level 2 • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1) tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface 2) general issues such as machine set-up, machine performance, and documentation. • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Performs all other duties as assigned by immediate supervisor Level 3 • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Assists supervisor in completion of deviation reports that outline both short- and long-term corrective action steps., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1) tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface 2) general issues such as machine set-up, machine performance, and documentation. • Performs basic and routine maintenance activities., • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Performs all other duties as assigned by immediate supervisor Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems.Le Requirements Education & Qualification: Level 1 Pay Rate $19.00 - $23.00 • High school graduate or GED equivalent, • 1-2 years Compression / Encapsulation Operator experience Level 2 Pay Rate $22.00 - $32.00 • High school graduate or GED equivalent, • 2-4 years Compression / Encapsulation Operator experience Level 3 Pay Rate $24.00 - $33.00 • High school graduate or GED equivalent, • 5+ years of experience, • Operate all machines., • Must be highly skilled in the proper set up an operation of tablet press and encapsulators - Work independently Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely to detail and accuracy with numbers., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift 4:00 PM to 2:15 AM

Job Description Job Description Date 06/25 Location 1300 Airport Road, North Brunswick NJ Title Operator, Tablet Coating 1 Department Standard Manufacturing Reports to Supervisor, Production FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Tablet Coating Operator is responsible for the operation and set-up of compression machines in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Coating Operator is accountable for overall process performance including safety, quality, shrink, attainment, and efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility Level 1 • Manufacture Production batches according to Batch Records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Check spray nozzles, piping, air pressure and boiler before start of the batch., • Observes machines gauges and equipment calibration status and reports any deviations to production supervisor., • Capable of running the following pieces of equipment/activity, • Accela Coater – 48” & 60”, • Coating medium/solution preparation, • Responsible for proper data entry in all batch record and logbook; and in process check control during coating process., • Perform all related materials handling pertaining to the products being coated., • Checks and verifies weight of tablets received from compression and reports deviations., • Correctly document all steps on batch record., • Adhere to all company policies., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Perform cleaning of equipment and processing room and dispose of rejected tablet and powder as per compliance requirements., • Knowledgeable in the relationship between spray rate, and inlet temperature, atomizing pressure, bed temperature, pan speed, and gun to bed distance., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned Level 2 • Manufacture Production batches according to Batch Records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Check spray nozzles, piping, air pressure and boiler before start of the batch., • Observes machines gauges and equipment calibration status and reports any deviations to production supervisor., • Capable of running the following pieces of equipment/activity as well as train on new equipment, including troubleshooting equipment and accessories:, • Accela Coater – 48” & 60”, • Coating medium/solution preparation, • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1) coating issues such as sticking twinning, orange peel, film peel, blistering, surface edge erosion and over - wetting 2) general issues such as coating pan set up, performance, documentation, and material issues., • Responsible for proper data entry in all batch record and logbook; and in process check control during coating process., • Perform all related materials handling pertaining to the products being coated., • Checks and verifies weight of tablets received from compression and reports deviations., • Assist in the investigation of batch record deviations., • Correctly document all steps on batch record., • Adhere to all company policies., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Perform cleaning of equipment and processing room and dispose of rejected tablet and powder as per compliance requirements., • Knowledgeable in the relationship between spray rate, and inlet temperature, atomizing pressure, bed temperature, pan speed, and gun to bed distance., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned Level 3 • Manufacture Production batches according to Batch Records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Check spray nozzles, piping, air pressure and boiler before start of the batch., • Observes machines gauges and equipment calibration status and reports any deviations to production supervisor., • Capable of running the following pieces of equipment/activity as well as train on new equipment, including troubleshooting equipment and accessories:, • Accela Coater – 48” & 60”, • Coating medium/solution preparation, • Assist in the revision and creation of department SOP’s., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1) coating issues such as sticking twinning, orange peel, film peel, blistering, surface edge erosion and over - wetting 2) general issues such as coating pan set up, performance, documentation, and material issues., • Responsible for proper data entry in all batch record and logbook; and in process check control during coating process., • Perform all related materials handling pertaining to the products being coated., • Checks and verifies weight of tablets received from compression and reports deviations., • Assist in the investigation of batch record deviations., • Correctly document all steps on batch record., • Adhere to all company policies., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Perform cleaning of equipment and processing room and dispose of rejected tablet and powder as per compliance requirements., • Knowledgeable in the relationship between spray rate, and inlet temperature, atomizing pressure, bed temperature, pan speed, and gun to bed distance., • Meets all safety expectations and follows all safety practices., • Works extended hours and occasional weekend overtime., • Other duties as assigned Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: Level 1 Pay Rate: $21.00 - $25.00 • High school graduate or GED equivalent, • 1-2 years of experience Level 2 Pay Rate: $23.00 - $28.00 • High school graduate or GED equivalent, • 2-4 years of experience, • Operate 2 machines at one time, • A clear understanding of the principal coating pan operation., • Responsible for training Level 3 Pay Rate: $28.00 - $38.00 • High school graduate or GED equivalent, • 5+ years of experience, • Operate all machines., • Solution prep, able to coat / troubleshoot the problems for all products., • A thorough understanding of the causes and prevention of common coating problems., • Responsible for training, • Ability to work with minimum to no supervision Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Must have attention to detail. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and w

Job Description Job Description Date 11/2020 Location 1300 Airport Road, North Brunswick NJ Title Production Operator Department Standard Manufacturing - Beads Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Beads Operator is responsible for the operation and set up of mills, granulators, drying oven, blenders, screening equipment, fluid bed dryers, feeders, etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follows batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Completes all labeling and inventory movements to ensure accurate inventory control., • Dismantles and cleans any accessories and equipment while also maintaining a clean work area., • Trains in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Vector Fluid Bed Dryer, inserts, and ancillary equipment, • K-Tron powder feeder, • Air Classifying Mill, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screens/ sieves equipment, • Fills in appropriate logbooks for equipment and rooms., • Performs all material handling of products and components., • Correctly document all steps on batch record., • Participates in any investigation for a deviation involving a batch record., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Other duties as assigned Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: • High school graduate or GED equivalent, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries. Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets. Additional Skills and Required Technical Ability per Position Level: Level 1 Pay Rate: $19.00 - $23.00 • 1-2 years experience, • Operates fluid bed dryer, blending, screening & milling machines., • Must be proficient in proper setup and operation of equipment in work area Level 2 Pay Rate: $22.00 - $24.00 • 2-4 years’ experience plus responsibilities above, • Operates, cleans, sets all machines in work area., • A clear understanding of the principal functions of the bead department., • Completes batch card independently, follow SOP’s and GMP’s strictly, • Certified forklift operator. Level 3 Pay Rate: $24.00 - $27.00 • 5+ Years’ experience plus responsibilities above, • Operates, cleans, sets all machines in work area., • Must be highly skilled in the proper set up an operation of blenders and granulators., • Applies cGMP’s & completes batch card instructions accurately - able to train all activities in bead manufacturing department., • Ability to work with minimum to no supervision, • Ability to train new employees Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift - 7:00 AM to 3:30 PM

Job Description Job Description Date 10/2025 Location 22 Van Dyke Avenue, New Brunswick NJ 08901 / 1300 Airport Road, North Brunswick NJ 08902 Title Operator, Dispensing Department Dispensing Reports to Manager, Dispensing FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Dispensing Operator will perform all functions related to dispensing of material, receipt of goods, put-away material into warehouse aisles, pull out material per Batch card/Pick ticket, put back to same location from where it was pulled for batches, manual order processing, order auditing, shipment preparation, pallet building, transferring material from wood to plastic pallets, and cycle counting inventory. All functions may require the use of powered industrial trucks, Syspro or RF as needed. Will need to work in temperature-controlled areas. Areas of Responsibility Level 1: Dispensing Operator Overview: This is a training-level role for individuals with limited or no prior experience in pharmaceutical dispensing. Works under close supervision while learning company SOPs, GMP standards, and equipment operations. Key Responsibilities: • Assist in pulling and weighing raw materials under supervision., • Learn to read and interpret batch cards and pick slips., • Calibrate scales before use., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Maintain basic cleanliness of work area and equipment., • Support warehouse duties such as material receipt and basic inventory handling., • Follow safety procedures and learn PPE protocols., • Operate pallet jacks or assist with forklift activities (if certified). Level 2: Dispensing Operator Overview: This level is for operators with hands-on experience in pharmaceutical or supplement dispensing. Operators are responsible for completing batch-related activities with minimal supervision and maintaining documentation compliance. Key Responsibilities: • Dispense raw materials independently per batch cards., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Weigh materials accurately and calibrate scales before use., • Use Syspro or RF systems for inventory control., • Handle, put-away, return, and transfer of goods between warehouse locations., • Perform manual order processing, auditing, and preparation for shipments., • Maintain gowning and hygiene protocols in controlled environments., • Ensure accurate documentation in logs and batch records. Level 3: Dispensing Operator Overview: A highly experienced operator who may act as a team lead or trainer. Oversees batch dispensing activities, ensures compliance, and supports continuous improvement initiatives. Key Responsibilities: • Lead batch dispensing operations; verify materials and documentation., • Train and mentor entry and intermediate-level operators., • Collaborate with cross-functional teams (QA, R&D, Production)., • Reviews batch card. Determine material to be used in the batch. Pull out material per requirement and enter in logbooks., • Performs requests received from other departments such as R&D, Production, QA or Purchasing etc., • Cleans room after batch is complete, • Ensures safety and quality standards are consistently followed., • Conduct cycle counts and helps manage inventory accuracy., • Troubleshoot equipment or material issues; escalate when necessary., • Lead compliance audits for dispensing areas., • Support continuous improvement, safety, and 5S initiatives. Physical & Environmental Requirements (All Levels): • Able to lift 55 lbs regularly; occasionally up to 75 lbs., • Stand/walk for 6+ hours per shift., • Work in temperature-controlled rooms with PPE (lab coat, gloves, face mask, respirator, etc.)., • Exposure to dust, noise, and cleaning agents. Bottom of Form Requirements Education & Qualification: Level 1: Dispensing Operator • High school diploma or GED., • 0–1 year of experience in manufacturing or warehouse setting., • Basic math and English reading skills., • Willingness to learn cGMP, OSHA, and SOPs. Level 2: Dispensing Operator • High school diploma or GED., • 2+ years of experience in a pharmaceutical production environment., • Forklift operation experience (certification preferred)., • Familiarity with cGMP and SOP documentation standards., • Attention to detail and ability to troubleshoot basic dispensing issues. Level 3: Dispensing Operator Requirements: • High school diploma or GED; technical certification a plus., • 4+ years of dispensing experience in a GMP-regulated and within a pharmaceutical production environment, • Strong understanding of regulatory compliance (FDA, GMP, OSHA)., • Proven ability to lead teams and communicate effectively., • Proficient in inventory software (Syspro or similar ERP systems)., • Additional experience in granulation, compression, or blending is a strong plus. Certifications, Licenses, Credentials: • Prior certification to operate a sit-down forklift is a plus. Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Must have attention to detail. Physical Requirements (lifting, etc.): • Ability to lift up to 55 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment 2nd shift: 3:00 PM - 11:15 PM

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Granulation/ Blending Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Granulation/Blending Operator is responsible for the operation and set up of granulators, drying oven, blenders, screening equipment etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Train in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Fluid bed dryer/processor, • Tray Drying Ovens, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screening/ sieving equipment, • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Other duties as assigned. Other Responsibilities Including Safety: • N/A Requirements Education & Qualification: Level 1 Pay Rate $19.00 - $22.00 • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 6-12 months experience, • Operates blending, screening & milling machines., • Must be proficient in proper setup and operation of blenders. Level 2 Pay Rate $21.00 - $24.00 • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 1 years of experience, • Operates 5 machines (blending, milling, sifting, tray dryer and granulation)., • A clear understanding of the principal functions of the blending /granulation department. Certified forklift operator., • Completes batch card independently, follow SOP’s and GMP’s strictly Level 3 Pay Rate $23.00 - $31.00 • High school graduate or GED equivalent, • 3+ years of experience, • Operate all machines., • Must be highly skilled in the proper set up an operation of blenders and granulators., • Applies cGMP’s & completes batch card instructions accurately - able to train all activities in blending & granulation department. Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees recei

Job Description Date 05/2018 Location 1300 Airport Road, North Brunswick NJ Title Supervisor, Packaging Department Packaging Reports to Manager, Packaging FLSA (Exempt or Non-Exempt Exempt Role Overview The Packaging Supervisor position is responsible to assist with planning, coordinating, and managing all activities of those employees in the packaging department. This person will demonstrate a high level of creativity and independence in the design and development of new or improved packaging processes, systems, prototypes, and projects from concept to production. Safety, sanitation, housekeeping, GMP standards, problem solving ability as well as good employee relations are considered key elements to success. They will need to coordinate and partner with other departments to maintain schedules and effect necessary changes and revisions. Areas of Responsibility • Ensures that timelines are met by distributing workload in accordance with changing priorities., • Ensures operation of equipment by coordinating, preventative maintenance, repairs; and evaluating new equipment and techniques., • Responsible for packaging production employees including mechanical support staff., • Oversees day to day operation of filling and packaging environment., • Coordinate activities and assist in setting priorities of mechanics and warehouse materials handlers to keep the production lines running efficiently and consistently., • Communicate all packaging activities with the Lead QA inspector to proper QA support is available., • Create and issue required packaging paperwork to line leaders and audit it daily for completeness and accuracy., • Prepare for the new shift by reviewing all entries to the log, packaging line status and issues., • Conduct routine meetings with departmental employee groups to provide guidance and to review problems, new procedures, and customer issues., • Works closely with Quality and Planning department to execute production plan., • Evaluates/solves production problems by reviewing the area of concern, developing potential solutions, technically evaluating, or testing the solutions, and preparing recommendations for management., • Maintain a work environment which fosters teamwork and supports the company’s efforts to continuously improve processes., • Prepares production reports and variance explanations, and accurately complies and files, Inventories, and order production supplies. Quality • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Follow batch records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Complete necessary Activity Reports for management., • Monitor the flow of paperwork from Receiving to Inventory Control Specialist for timely data entry., • Resolve discrepancies with shipping, invoices, packing slips, and receiver reports., • Ensure products are staged for counting and inspection., • Ensure products are stored properly to conserve space and comply with safety procedures. People • Foster a collaborative environment in which diverse backgrounds are respected and valued., • Establish and maintain effective relationship with your peers, team, and senior managers in order to communicate effectively., • Provides clear direction & expectations for direct reports and assures that tasks & responsibilities are clear., • Sets goals and objectives in alignment with the organization for self and direct reports: Creates action plans, sets milestones, and delivers progress reports and developmental plans for team members., • Develop employees that contribute to the daily success of the line and can be successful in the supervisor’s absence., • Maintains open lines of communication with employees, peers, and management., • Assumes responsibility for the efficient, timely, and accurate completion of warehouse functions, • Learns and understands specific manufacturing operations sufficiently and can provide support in other areas as needed., • Evaluates performance of employees and creating corrective action plans where appropriate., • Assists with personnel decisions including hiring, terminations, attendance management, wage decisions, transfers, and promotions., • Interpret and explain the policies of the USPL Handbook so employees can understand the application of each policy as well as management’s purpose for each policy., • Apply all company policies fairly and consistently across departments and develop a relationship of trust and transparency with their employees., • Identify strengths and weaknesses of all associates on their team to ensure optimal performance; knows which employees they can assign additional tasks to, and which need closer scrutiny. Mechanical • Perform moderate to complex adjustments, maintenance, and repairs to packaging equipment., • Perform changeover and set-up of packaging machines as well as troubleshoot mechanical and basic electrical systems and make appropriate repairs to machines., • Perform daily preventative maintenance on plant equipment such as packaging equipment, conveyors, and compressors., • Assist on equipment installations within the plant structure. Complete work orders to repair machinery., • Read and interpret equipment manuals to perform required maintenance and service., • Diagnose problems, replace, or repair parts, test and make adjustments., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Set up full line configurations of multiple pieces of equipment, independently., • Interact with management to assist in new project quotation generation by providing input on equipment choices, potential capital purchases or improvements and estimated output., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision. Other Responsibilities Including Safety: • Responsible for ensuring each employee works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems., • Responsible for maintenance of warehouse equipment, providing both preventive maintenance programs and communicating all necessary repairs to Director of Facilities., • Responsible for warehouse safety programs to provide a safe and clean workplace for employees and within the regulations of all OSHA local and state regulations., • Ensure all associates are trained and following all standard operating procedures., • Works extended hours and occasional weekend overtime., • Other duties as assigned. Requirements Education & Qualification: • BA degree and/or 4+ years Supervisory experience, • Minimum of two (2) years of work experience in nutritional’s, supplements, food, or pharmaceutical manufacturing industries is preferred., • Hands on experience with any of the following processes: Blending/Granulation, Tablet Compression and/or Film Coating, Encapsulation, or Pharmacy/Pre-Weigh Dispensing. Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Bi-Lingual in Spanish or Hindi is a plus., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool., • Must be able wear all PPE including lab coat, face mask, booties, gloves, safety glasses/goggles and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. 2nd shift 3:15 PM to 11:45 PM

Job Description Job Description Date 10/2025 Location 1200 Airport Road, North Brunswick NJ Title Technician, R&D Formulation Department Research & Development Reports to Director, Research & Development FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Formulation Technician is responsible for supporting the formulation and manufacturing processes by accurately weighing, mixing, and processing raw materials in accordance with Standard Operating Procedures (SOPs), Good Manufacturing Practices (cGMP), and batch documentation requirements. This role involves hands-on operation and maintenance of various pharmaceutical production equipment and requires close adherence to quality, safety, and regulatory standards. Areas of Responsibility Technician, R&D -Level 1, Works under close supervision; learns formulation procedures, documentation, and equipment operation. Technician, R&D -Level 2 Works independently on complex formulation and scale-up activities; may train junior staff Technician, R&D -Level 3 Operates with minimal supervision; recognized technical expert and mentor within the R&D team. Develops and updates SOPs, batch records, and training materials. Oversees equipment readiness, preventive maintenance, and calibrations. Mentors’ technicians and ensures high-quality documentation and compliance. Supports technology transfer and production readiness reviews Key Responsibilities Level 1, 2 & 3 • Accurately weigh and transfer raw materials using calibrated balances and scales in accordance with approved batch records and formulation guidelines., • Perform formulation and manufacturing activities for pilot, scale-up, and commercial batch production., • Operate equipment for mixing, blending, granulation, and other material processing functions in support of pharmaceutical product development and manufacturing., • Complete and maintain accurate, compliant, and timely documentation, including Batch Manufacturing Records (BMRs), Logbooks, Protocols, and related forms in accordance with cGMP and SOP requirements., • Assist in the development and optimization of formulations for various dosage forms such as tablets, capsules, and granules, under the direction of senior formulation scientists or supervisors., • Independently execute and monitor benchtop, pilot-scale, and manufacturing scale-up batches with minimal supervision., • Set up, operate, clean, and perform changeovers on R&D and pilot-scale manufacturing equipment, including but not limited to:, • Tablet Presses, • Capsule Filling Machines, • Coating Machines, • Granulators, • Fluid Bed Dryers (FBDs), • Ensure equipment is properly maintained, sanitized, and operated in compliance with SOPs, safety protocols, and current Good Manufacturing Practices (cGMP)., • Proactively identify and troubleshoot issues during formulation development, demonstrating strong problem-solving skills and an ability to anticipate potential risks or failures., • Adhere strictly to all company policies, safety guidelines, and regulatory requirements., • Participate in routine housekeeping, equipment cleaning, and 5S/continuous improvement initiatives to maintain a safe and efficient working environment., • Perform additional duties and responsibilities as assigned by management to support departmental and organizational goals. Requirements Education & Qualification: Technician, R&D -1 • Requires High School diploma or GED, Associate degree preferred., • 1 to 4 years of experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes will be a plus. Technician, R&D -2 • Requires High School diploma or GED, Associate degree preferred., • 6 to 10 years’ experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes. Technician, R&D -3 • Associate’s or Bachelor’s degree in Chemistry, Biology, Engineering, or related scientific field, • 3 to 12 years’ experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes. Certifications, Licenses, Credentials: • N/A Skills & Ability • Requires hands-on experience or knowledge to set-up & operate Tablet, Capsule, Granulation manufacturing process equipment such as Tablet Press, Capsule Filling, Coating, Granulator, Fluid Bed Dryers, etc. and the ability to troubleshoot this equipment., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for issues such as sticking, picking, capping, chipping, compressibility, delamination, etc., • Works independently or in a team assisting others., • Performs basic math calculations and follow written instructions with accuracy and pay attention to detail., • Able to follow and understand cGMP, OSHA standards etc., • Able to distinguish different shades of colors., • Intermediate user of MS Office, Excel, Word, and Outlook, • Complies with all regulatory/ in-house requirements (may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP’s, GLP, documentation) when performing the assigned activity., • Demonstrates above average written communication skills in the English language to follow the industry regulated instruction sheets. Physical Requirements (lifting, etc.): • The employee is frequently required to sit (50%), stand, and walk (50%) at a lab bench., • Able to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Able to stand and walk on the production floor a minimum of 6 hours per shift., • Uses hands to finger, handle or feel, or to operate or to control objects. Able to lift up to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Able to occasionally work on a rolling ladder or step stool, or to lean over equipment as well as kneeling on the floor to clean under the equipment., • Able to wear all PPE including lab coat, face mask, booties, gloves, safety glasses/goggles and respirator. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a laboratory environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents., • Occasionally walks through warehouse or manufacturing workplace and will be required to wear appropriate PPE for each work area. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an “at will” relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation 9:00 am to 5:30 PM

Job Description Job Description Date 2025 Location 1300 Airport Road, New Brunswick New Jersey Title Associate, Purchasing Department Operation (Purchasing) Reports to Senior Manager, Purchasing & Sourcing FLSA (Exempt or Non-Exempt Exempt Role Overview The Purchasing Associate ensures the timely procurement of materials and components, manufacturing equipment, lab supplies, warehouse, and office supplies across all facilities. Areas of Responsibility • Issue Purchase orders in the ERP system for Raw Materials and/or packaging materials and sending them out to respective vendors., • Issue Purchase orders in the ERP system for consumable goods to support manufacturing, engineering, Lab, and Warehouse across all facilities and sending them out to respective vendors., • Ensure full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times., • Work closely with the planning team and Purchasing manager to ensure the accuracy of Purchase orders issued in the ERP system., • Work in a safe and responsible manner in order to create an injury-free and incident-free workplace., • Comply with all job-related safety and other training requirements., • Keep management informed of area activities and of any significant problems., • Other duties as assigned. Requirements Education & Qualification: • Relevant supply chain or purchasing experience (preferably in a similar industry such as Pharmaceutical or Nutraceutical). Knowledge, Skills, and Abilities: • Able to read, write and speak English sufficiently., • Strong project management and leadership skills., • Comfortable with figures and in collecting, analyzing, and interpreting data., • Solid judgment with ability to make good decisions., • Ability to interact effectively with different departments and with all levels of management., • Must know MS Office, particularly Excel., • Knowledge of ERP systems (Syspro, SAP) preferred., • Bi-Lingual in either Chinese or Hindi is a plus. Physical Requirements (lifting, etc.): • Ability to navigate office, lab, and/or plant floor working environments., • Standard office environment without unpleasant or hazardous conditions. Physical demands involved in office work such as the ability to talk, hear, use hands to hold and feel; work on a computer up to 7-8 hours a day; close vision required for computer usage., • Must have the ability to wear applicable personal protective equipment utilized at this site, including safety glasses/goggles, hair nets, lab coats, and safety shoes. Work Environment (Office, Warehouse, temperature extremes, etc.): • Exposed to lab and/or plant floor working environments., • Standard office environment without unpleasant or hazardous conditions., • Temperature controlled for heat and air conditioning. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including medical, dental, vision, short- and long-term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation in the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation. 1st shift - 9:00 AM to 5:30 PM

Job Description Hampton Inn by Hilton, South Plainfield-Piscataway-205 New World Way, South Plainfield, NJ 07080 We are currently looking for Chief Engineer to join our Team! Our Hampton Inn with 107 guest rooms, is located off I-287/I-95 in South Plainfield, a half-mile from Hadley Center and 10 minutes from Piscataway. Rutgers University – New Brunswick is six miles away and we’re close to a variety of corporate offices. The New Jersey Convention and Exposition Center is nine miles away and we’re 30 minutes from Newark Airport. We serve a daily hot complimentary to all our guests. A great place to stay – a great place to work. The Hampton Inn is one of the 50 hotel properties owned and managed by the award-winning hotel management company, Buffalo Lodging Associates. Buffalo Lodging Associates, a hotel management company based out of Canton, MA has put an emphasis on true hospitality since being founded in 1996. While building an extensive portfolio of 50 hotels, we’ve partnered with the most respected hotel brands in the business including Marriott International, Hilton Worldwide, InterContinental Hotels Group, Choice Hotel International and Radisson Hotels. The core and heart of our company lies within our dedicated associates, for we wouldn’t be an award-winning company without each and every one of them. A GROWING HOTEL MANAGEMENT COMPANY – COME JOIN US! We value our associates with competitive compensation plans and other benefits and perks. Some of these benefits include: • Weekly pay, • Paid vacation, sick days and holidays, • Medical, dental, vision insurance, • 401K Retirement plan with company match, • Travel discounts on our branded properties, • Career growth opportunities Role: The Chief Engineer takes ownership and pride in the maintenance of the property, while fostering the Buffalo Lodging Associates (BLA) culture and values- Excellence, Passion, Integrity, Inclusive. Responsibilities include: • Creating a safe and appealing property by completing routine preventative maintenance on laundry equipment, heating and air conditioning units, ice machines, fire extinguisher, fire and smoke alarms, lawn sprinkler, lawn equipment, exercise equipment and plumbing, • Maintaining work order assignment boards and tracking completed/pending work orders I and following up on all incomplete work orders to inform the requesting guest or department of the status., • Evaluating and selecting quality vendors that are reliable and provide good value for their price, • Supervisory duties of the Maintenance Assistant on site including interviewing, hiring, training, appraising performance, rewarding and disciplining; planning, assigning, directing work, addressing complaints and resolving problems. What You Bring: • At least three years of supervisory or lead mechanic experience in a hotel or related field, • Demonstrated general mechanical skills are necessary, • Basic repair, painting, wall covering HVAC, electrical work, plumbing, boiler operation, pool maintenance and general maintenance skills required, • Vocational training is preferred but not required, • Must have valid drivers license, and acceptable driving history subject to company approval. Buffalo Lodging provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination.

Job Description Job Description Date 06/2020 Location 1200 Airport Road, North Brunswick NJ Title Chemist, Quality Control 1, 2 & 3 Department Quality Control Reports to Manager, Analytical, R&D, & Method Validation FLSA (Exempt or Non-Exempt Non- Exempt Role Overview The Chemist, QC role is responsible for performing analytical testing, laboratory investigations, data review, and quality control activities to ensure the identity, strength, purity, and quality of raw materials, active pharmaceutical ingredients (APIs), in-process materials, finished products, and stability samples. The role operates within an FDA-regulated laboratory environment and supports compliance with cGMP, Good Documentation Practices, company procedures, and applicable regulatory requirements. The Chemist performs chemical and physical analysis using a variety of analytical techniques and laboratory instrumentation, including HPLC/UPLC, GC, ICP-MS, UV-Visible Spectrophotometer, FTIR, Auto Titrators, Dissolution Apparatus, Karl Fischer Titrators, Bulk Density Testing, Potentiometers, and other QC laboratory equipment. The role is responsible for accurate testing, documentation, instrument operation, troubleshooting, and communication of analytical results to support product quality and timely release. Throughout all levels, the Chemist is expected to demonstrate strong analytical skills, attention to detail, problem-solving ability, and commitment to quality and compliance. The career progression moves from executing established laboratory procedures at the entry level to independently managing complex analytical challenges, supporting method validation/verification, compendial compliance, and providing technical leadership within the QC organization. Areas of Responsibility Chemist, QC 1: The Chemist, QC I is an entry-level laboratory professional responsible for performing routine chemical and physical analysis of raw materials, in-process samples, finished products, and stability samples according to established official and in-house test procedures. The Chemist evaluates samples for identity, strength, purity, and quality attributes while developing proficiency in analytical techniques, laboratory instrumentation, and GMP laboratory practices. The Chemist, QC I works under the guidance of experienced chemists and supervisors to ensure testing is performed accurately, safely, and in compliance with company procedures, cGMP, and regulatory requirements. Key Responsibilities • Perform routine sampling, chemical testing, physical testing, and assays of raw materials, active pharmaceutical ingredients (APIs), in-process materials, finished products, and stability samples in an FDA-regulated laboratory environment., • Perform analytical testing using wet chemistry techniques and laboratory instrumentation, including:, • HPLC/UPLC, • GC, • IR/FTIR, • UV-Visible Spectrophotometer, • Auto Titrator, • Dissolution Apparatus, • Karl Fischer (KF), • Potentiometer, • Bulk Density testing, • Prepare reagents, standards, solutions, and samples according to approved procedures., • Perform assigned testing activities and accurately document analytical results., • Support troubleshooting and testing of specific batches to assist with identification of potential causes of out-of-specification (OOS) results., • Assist with customer complaint investigations by providing analytical test results., • Prepare and review QC documentation, including test records, SOPs, test procedures, and protocols as assigned., • Perform routine instrument maintenance and calibration activities under supervision and training., • Maintain laboratory organization, housekeeping, safety, and chemical waste compliance., • Follow cGMP, Good Documentation Practices, and company quality requirements., • Complete approximately:, • 95% analytical testing activities, • 5% documentation and record review activities., • Work extended hours or occasional weekends as required., • Perform other duties as assigned. Chemist, QC 2: The Chemist, QC II is an experienced laboratory professional responsible for performing routine and complex analytical testing with increased independence. This role applies technical knowledge to troubleshoot analytical issues, support investigations, review data, maintain laboratory equipment, and provide technical support to QC operations. Chemist, QC II demonstrates proficiency with analytical instrumentation and applies knowledge of cGMP, and laboratory procedures to ensure accurate and timely testing. Key Responsibilities Includes all Chemist, QC I responsibilities, with increased ownership and accountability: • Independently perform chemical, physical, and instrumental testing of raw materials, APIs, in-process materials, finished products, and stability samples., • Perform complex analytical testing using QC instrumentation including:, • HPLC/UPLC, • GC, • IR/FTIR, • UV-Visible Spectrophotometer, • Dissolution, • Karl Fischer, • Auto Titrator, • Potentiometer, • Other QC laboratory equipment., • Troubleshoot analytical testing issues and instrument-related challenges., • Support investigations related to:, • Out-of-specification (OOS) results, • Atypical results, • Customer complaints, • Product quality concerns, • Analyze test results and provide technical input to assist with root cause determination and corrective actions., • Review analytical data and QC documentation for accuracy and completeness., • Prepare and revise SOPs, test procedures, protocols, and laboratory documentation., • Perform instrument maintenance, calibration, and troubleshooting activities with limited supervision., • Support continuous improvement activities within the QC laboratory., • Provide technical support and guidance to QC Chemist I personnel., • Ensure compliance with customer specifications, company requirements, and federal, state, and local regulations., • Maintain laboratory safety, compliance, and documentation standards., • Work extended hours or weekends as needed. Chemist, QC III : The Chemist, QC III is a senior-level technical contributor responsible for both routine and advanced analytical testing, complex troubleshooting, laboratory investigations, and technical leadership within the QC organization. This role serves as a subject matter expert for analytical methods, instrumentation, and laboratory practices while supporting compliance, continuous improvement, and cross-functional initiatives. Key Responsibilities Includes all Chemist, QC II responsibilities, with increased technical leadership: • Serve as a technical resource for analytical testing, instrumentation, and laboratory troubleshooting., • Perform and oversee complex analytical testing activities for raw materials, APIs, in-process materials, finished products, and stability samples., • Lead troubleshooting activities for specific batches and analytical issues to determine root cause and recommend corrective actions., • Lead or support complex investigations related to:, • OOS results, • Deviations, • Customer complaints, • Product quality issues., • Review and provide technical approval of analytical data and laboratory documentation., • Support analytical method validation, verification, transfer, and optimization activities., • Develop, review, and improve SOPs, test procedures, protocols, and technical reports., • Provide technical guidance and mentoring to QC Chemist I and QC Chemist II team members., • Support internal audits, customer audits, and regulatory inspections.

Job Description Job Description Date 05/2018 Location 1300 Airport Road, North Brunswick NJ Title Operator, Packaging Department Packaging Reports to Supervisor, Packaging FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Packaging Operator is responsible for safely operating the packaging equipment to package in process products in accordance with company standard operating procedures and the packaging order. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the packaging work rooms. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Handle start up and shut down duties pertaining to equipment at the beginning and end of each shift., • Load and unload items into packaging machine and remove rejected packages to be isolated as rejects or re-inspection., • Execute packaging processes in accordance with packaging record/work orders., • Troubleshoot and make appropriate adjustments to machine to maintain packaging specifications., • Responsible for disposal of rejected tablets and packaging components in the designated area., • Responsible to clear any jams that do not require a mechanic, • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Other duties as assigned. Other Responsibilities Including Safety: • N/A Requirements Education & Qualification: • High school graduate or GED equivalent and/or 1+ years in bottle, blister, and other assorted tablet packaging, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets. Physical Requirements (lifting, etc.): • Ability to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Must stand and walk on production floor a minimum of 8 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be able to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able wear all PPE including safety shoes, lab coat, face mask, booties, gloves, safety glasses/goggles and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. shift schedule 2nd shift - 3:15 PM to 11:45 PM Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodations. This Job Description has been reviewed with my supervisor. 3rd shift - 11:00 PM to 7:30 AM

Job DescriptionSports & Live Event Videographer Paid Travel Across the U.S. | Professional Equipment Provided | No Editing Required Turn your video production experience into a season of travel and live events. DanceBUG is hiring Videographers for our February–June dance competition season. If you've filmed sports, concerts, weddings, theatre or other live events, we'll provide the equipment and teach you everything you need to know about capturing dance. You shoot. We provide the gear, travel and training — and we handle post-production. What You Get • Starting at $25/hour, • Overtime after 40 hours/week, • Guaranteed minimum daily pay, • Paid travel days, • Flights, hotels and rental cars paid by DanceBUG, • Private hotel room, • Professional camera & livestream equipment provided, • Paid training, • No editing or post-production, • Consistent weekend work throughout the season Season: February–June Typical Travel: Thursday/Friday through Sunday/Monday Events: Throughout the United States What You'll Do • Travel to dance competitions across the U.S., • Capture live performances using professional video equipment, • Set up and operate camera and livestream systems, • Monitor video feeds and production equipment throughout events, • Work alongside other DanceBUG media team members, • Upload and manage event mediaWe'll Train You No dance experience required. Every new Videographer receives virtual training in January followed by at least two live training events alongside experienced team members before working independently. If you know cameras and live production, we'll teach you dance and the DanceBUG workflow. Experience We're Looking For Experience in any of the following is a plus: Sports • Live Events • Weddings • Concerts • Theatre • Broadcasting • Film Production • Livestreaming • OBS • Multi-Camera Production • Jib Operation You don't need experience in every area. We're looking for people who are comfortable with cameras, technology and fast-paced live production environments. Requirements • Authorized to work in the United States, • Live within approximately one hour of a major airport, • Valid U.S. driver's license, • Available for regular weekend travel throughout the February–June season, • Comfortable driving approximately 5–6 hours when required, • Comfortable working long production days, • Able to lift approximately 50 lbs, • Able to successfully complete a criminal background checkWhy DanceBUG? For nearly 25 years, DanceBUG has been a leader in dance media and event technology across North America. You'll travel the country, work with professional production equipment and gain hands-on experience capturing large-scale live events — while working with new AI-assisted camera technology and evolving livestream production systems. Ready to Hit the Road? If you have experience behind a camera and enjoy the energy of live events, we want to hear from you. Apply today and spend your season traveling the U.S. capturing live performances with DanceBUG. Powered by JazzHR n2TMUYbBDy

Job Description Job Description Date 7/2022 Location 1300 Airport Rd, North Brunswick Title Lead, Production Operator Department Manufacturing Reports to Manager, Production FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Production Lead (will be the Go-To person) Operator is responsible for meeting production volume and quality targets the standards through safe, efficient use of resources and materials in production processes. Enters data into production control system. Safety, sanitation, housekeeping, GMP standards, problem solving ability as well as good employee relations are considered key elements to success. This position is responsible for planning, coordinating, and managing all production activities of those employees on the floor. They will need to coordinate and partner with other departments to maintain schedules and effect necessary changes and revisions Areas of Responsibility Production • Leads and demonstrates all activities of shift personnel on the manufacturing / production floor., • Collaborates and coordinates and with shift Production Supervisor to plan production schedules, activities on the production floor to meet production and delivery targets., • Ensures that production schedule is met by distributing workload in accordance with changing priorities., • Communicates with the production supervisor/manger as to the beginning and end of product runs, washouts, and anticipated downtime., • Responsible for verifying paperwork is being completed as per the company Standards, current Good Manufacturing Practices (cGMP’s), Lot Tracking, washouts, pre-shift, and post-shift., • Ensures all proper line clearances and set-up performances. Trouble shoot, set-up, and run processing equipment as required., • Works closely with maintenance establishing preventative maintenance practices., • Ensures the proper operation of equipment’s by coordinating, preventative maintenance, repairs; and evaluating new equipment and techniques., • Responsible for product quality and workmanship consistent with the Company’s manufacturing objectives, QMS and profit goals., • Provides daily reporting of production metrics., • Performs required training and guidance as needed, responds to any applicable questions from operators, trains the operator on a job-by-job basis, the fundamental production steps if required., • Maintains a work environment which fosters teamwork and supports the company’s efforts to continuously improve processes., • Ensures production operations are properly controlled and regulatory compliance requirements are met., • Ensures the accuracy of batch documentation, Standard Operating Procedures, critical documentation templates., • Ensures that all equipment is in good condition and current calibration, training is current, and high standards of housekeeping are maintained in all areas of responsibility., • Evaluates and solves production problems by reviewing the area of concern, developing potential solutions, technically evaluating, or testing the solutions, and preparing recommendations for management., • Prepares production reports and variance explanations, and accurately complies and files; Inventories and order production supplies as requested., • Performs the operations like cleaning, and set-up of the following pieces of equipment as well as new equipment: Blending and Granulation • Double cone / V- blenders: 6cu. ft. to 150 125 30 cu. ft., • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Vector Fluid Bed Dryer / Processor, • Tray Drying Ovens, • K-Tron powder feeder, • Air Classifying Mill, • Fitz mill/Multi mill Compression and Encapsulation • Korch 55 station 53, • Cadmac 31’ 37’ & 45’ station (mono and bilayer), • ACJ Pam, • Syntagon Coater • Accela Coater – 48” & 60”, • Coating medium/solution preparation Quality • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Follow batch records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing. People • Foster a collaborative environment in which diverse backgrounds are respected and valued., • Establish and maintain effective relationships with your peers, team, and senior managers to communicate effectively., • Provides clear direction & expectations for direct reports and assures that tasks & responsibilities are clear., • Sets goals and objectives in alignment with the organization for self and direct reports: Creates action plans, sets milestones, and delivers progress reports and developmental plans for team members., • Develop employees that contribute to the daily success of the line and can be successful in the supervisor’s absence., • Maintains open lines of communication with employees, peers, and management., • Assumes responsibility for the efficient, timely, and accurate completion of Production functions., • Learns and understands specific manufacturing operations sufficiently and is able to provide support in other areas as needed., • Evaluates performance of employees and creating corrective action plans where appropriate, • Assists with personnel decisions including hiring, terminations, attendance management, wage decisions, transfers, and promotions., • Interpret and explain the policies of the USPL Handbook so employees can understand the application of each policy as well as management’s purpose for each policy., • Apply all company policies fairly and consistently across departments and develop a relationship of trust and transparency with their employees., • Identify strengths and weaknesses of all associates on their team to ensure optimal performance; knows which employees they can assign additional tasks to, and which need closer scrutiny Safety • Responsible for ensuring each employee works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems., • Works extended hours and occasional weekend overtime., • Other duties as assigned. Requirements/Preferred

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Maintenance (PKG.) Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Packaging Mechanic is responsible for operating, maintaining, troubleshooting, and repairing packaging lines and auxiliary equipment (e.g. fillers, cappers, labelers, cartoners, sealers, conveyors, etc.). On higher levels, the role involves preventive maintenance, changeovers, and acting as a technical leader on the packaging floor. Areas of Responsibility Level 1 – Mechanic, Maintenance (PKG.) Mechanic supports routine maintenance, equipment cleaning, basic setup, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to packaging maintenance, this role focuses on learning and executing tasks safely and accurately. Operates under close supervision, handling routine maintenance tasks such as cleaning, basic setups, and minor repairs. Escalates complex issues to higher-level technicians. Key Responsibilities: • Assist with setup, changeovers, cleaning, and basic operation of packaging lines., • Load materials (labels, cartons, films) into packaging equipment., • Perform basic visual inspections, detect packaging defects, and remove faulty units., • Assist in daily cleaning, line sanitation, and housekeeping., • Follow standard operating procedures (SOPs), batch records, and safety protocols., • Document basic packaging metrics, logs, and shift records., • Escalate technical issues to higher‑level technicians., • Assist in minor mechanical adjustments (e.g. tightening bolts, replacing belts) under supervision., • Participate in safety and quality training. Level 2 – Mechanic, Maintenance (PKG.) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, perform machine change overs and setup and perform limited repairs . Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Independently perform maintenance, troubleshooting, and repair on packaging lines including blister, bottle, cartoning, and label printing systems., • Diagnose mechanical, electrical, pneumatic, and control system issues (motors, drives, sensors, solenoids, PLC I/O) on packaging equipment., • Execute changeovers and line reconfigurations, calibrations, and adjustments for product format changes., • Perform preventive maintenance and predictive maintenance tasks, identifying worn parts and scheduling replacements., • Read and interpret mechanical drawings, electrical schematics, and wiring diagrams., • Mentor Level 1 technicians, guiding and reviewing their work., • Assist in packaging reliability improvement initiatives, root cause analyses, and process optimization., • Support emergency breakdowns and unscheduled repairs to minimize downtime., • Participate in regulatory and safety audits related to packaging lines. Level 3 - Mechanic, Maintenance (PKG.) Mechanics are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Operates independently with full responsibility over packaging line performance. Handles advanced diagnostics, major repairs, preventive maintenance programs. Makes judgment calls on repair vs replace. Leads projects, supports regulatory compliance, and provides technical leadership. Works with the engineerign team in identfying and proposing process improvements and in maintaining adequate critical spare parts as well as consumables. Key Responsibilities: • Lead maintenance, upgrade, and optimization of complex packaging lines (blister, bottle, cartooning, label printing, IFC lines)., • Perform advanced diagnostics, root cause analysis, and system redesigns to improve reliability and throughput., • Take full responsibility for major line failures and coordinate cross‑functional resources to resolve issues., • Plan and execute capital projects, line changeovers, expansions, and line integrations., • Act as technical liaison with vendors, OEMs, contractors, and internal engineering groups., • Develop and manage preventive and predictive maintenance programs., • Mentor, train, and coach Level 1 and Level 2 technicians., • Participate in regulatory inspections and ensure compliance documentation., • Recommend equipment upgrades, modifications, or replacements., • Lead packaging continuous improvement initiatives (OEE improvements, downtime reduction). Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (PKG.) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • Forklift experience is a plus. Level 2 – Mechanic, Maintenance (PKG.) • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • 1+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred. Level 3 – Mechanic, Maintenance (PKG.) • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • Trade certifications in HVAC, electrical, pneumatics, or hydraulics are highly preferred. Certifications, Licenses, Credentials: • License or certifications in electronics, pneumatics and/or hydraulics preferred., • Forklift /scissor lift driver’s certification is a plus but not a requirement. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Able to read from schematics and blueprints. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on t

Date - 06/2025 - Location - 1300 Airport Road Van Dyke Reports to - Manager, Warehouse - FLSA (Exempt or Non-Exempt) - Non-Exempt Role Overview The Forklift driver will perform all functions related to receipt of goods, put-away into warehouse, replenishment of pick areas, manual order processing, order auditing, shipment preparation, pallet building, truck loading and cycle counting inventory. All functions may require use of powered industrial trucks, SAP or RF as needed. Areas of Responsibility Receives product from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products. Accurately audits and verifies all incoming quantities for entry into computerized inventory. Performs on and off-site warehousing duties to include: the initial movement of materials to appropriate locations, effective space utilization, and material retrieval delivery, using powered industrial equipment as needed. Performs order fulfillment duties to include: reviewing and prioritizing available orders, determining stock requirements and maintaining levels of required inventory, physically picking and packing orders, auditing and verifying picked orders, preparing completed orders for shipping, using SAP and RF as needed. Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, tracking shipments, using SAP and RF as needed. Ensures safety and quality standards are consistently followed. Performs sortation duties to include: lifting cartons at sortation, palletizing cartons, printing pallet tickets, moving freight to the dock, using SAP and RF as needed. Ensures full compliance with Company policies, procedures, GMP's, Ethical Business Practice, and SOP's at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements. Handles start up and shut down duties pertaining to equipment at the beginning and end of each shift. Maintains proper gowning and hygiene to ensure integrity of the product as per company policies. Works extended hours and occasional weekend overtime. Works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements. Other duties as assigned Requirements Education & Qualification: High school graduate or GED equivalent 2+ years in distribution/warehousing Minimum of one (2) year work experience in nutritional's, supplements, food or pharmaceutical manufacturing industries Valid driver's license Certifications, Licenses, Credentials: N/A Skills & Ability Demonstrates ability to work in a team and assist others. Able to follow written instructions precisely and perform basic math calculations as required. Understands and is knowledgeable of cGMP, OSHA standards etc. Mechanically inclined to understand inner workings of equipment. Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets. Prior experience driving sit-down and stand-up PITs and ticketing experience helpful Must pass forklift certification process (both written and driving tests) Physical Requirements (lifting, etc.): Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds. Must stand and walk on production floor a minimum of 6 hours per shift Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances. Occasionally works from a rolling ladder or step stool, must be able to lean over equipment as well as kneeling on the floor to clean under the equipment. Must be able wear all PPE including lab coat, face mask, booties, gloves, safety glasses/goggles and respirators. Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift - 3.00 PM to 11:15 PM

Job Description Job Description Date 06/2025 Location 1300 Airport Road – Van Dyke Title Operator, Forklift Department Operations Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt) Non-Exempt Role Overview The Forklift driver will perform all functions related to receipt of goods, put-away into warehouse, replenishment of pick areas, manual order processing, order auditing, shipment preparation, pallet building, truck loading and cycle counting inventory. All functions may require use of powered industrial trucks, SAP or RF as needed. Areas of Responsibility • Receives product from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Accurately audits and verifies all incoming quantities for entry into computerized inventory., • Performs on and off-site warehousing duties to include: the initial movement of materials to appropriate locations, effective space utilization, and material retrieval delivery, using powered industrial equipment as needed., • Performs order fulfillment duties to include: reviewing and prioritizing available orders, determining stock requirements and maintaining levels of required inventory, physically picking and packing orders, auditing and verifying picked orders, preparing completed orders for shipping, using SAP and RF as needed., • Performs shipping duties to include: Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, tracking shipments, using SAP and RF as needed., • Ensures safety and quality standards are consistently followed., • Performs sortation duties to include: lifting cartons at sortation, palletizing cartons, printing pallet tickets, moving freight to the dock, using SAP and RF as needed., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Handles start up and shut down duties pertaining to equipment at the beginning and end of each shift., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements., • Other duties as assigned Requirements Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Minimum of one (2) year work experience in nutritional’s, supplements, food or pharmaceutical manufacturing industries, • Valid driver’s license Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Prior experience driving sit-down and stand-up PITs and ticketing experience helpful, • Must pass forklift certification process (both written and driving tests) Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able wear all PPE including lab coat, face mask, booties, gloves, safety glasses/goggles and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift - 7:30 AM to 4:00PM

Date - 06/2025 - Location - 1300 Airport Road, North Brunswick NJ Title - Operator, Compression & Encapsulation - Department - Standard Manufacturing Reports to - Production Supervisor - FLSA (Exempt or Non-Exempt - Non-Exempt Role Overview The Compression and Encapsulation Operator is responsible for the operation and set-up of tablet compression machines and set-up of automatic capsule filling machine in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Operator is accountable for overall production line performance including safety, quality, shrink, attainment, and line efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility Level 1: • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP's, Ethical Business Practice, and SOP's at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to identify and report to the team lead or supervisor troubleshoot product issues., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP's and company policies., • Must be able to work extended work hours and weekend overtime., • Performs all other duties as assigned by immediate supervisor Level 2: • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP's, Ethical Business Practice, and SOP's at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for:, • tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, • general issues such as machine set-up, machine performance, and documentation., • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP's and company policies., • Must be able to work extended work hours and weekend overtime., • Performs all other duties as assigned by immediate supervisor Level 3: • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP's, Ethical Business Practice, and SOP's at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Assists supervisor in completion of deviation reports that outline both short- and long-term corrective action steps., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for:, • tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, • general issues such as machine set-up, machine performance, and documentation., • Performs basic and routine maintenance activities., • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP's and company policies., • Must be able to work extended work hours and weekend overtime., • Performs all other duties as assigned by immediate supervisor Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: • Level 1 Pay Rate $19.00 - $23.00 High school graduate or GED equivalent 1-2 years Compression / Encapsulation Operator experience, • Level 2 Pay Rate $22.00 - $32.00 High school graduate or GED equivalent 2-4 years Compression / Encapsulation Operator experience, • Level 3 Pay Rate $24.00 - $33.00 High school graduate or GED equivalent 5+ years of experience Operate all machines. Must be highly skilled in the proper set up an operation of tablet press and encapsulators - Work independently Certifications, Licenses, Credentials: N/A Skills & Ability: • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely to detail and accuracy with numbers., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets. Physical Requirements (lifting, etc.): Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds. Must stand and walk on the production floor for a minimum of 6 hours per shift Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances. Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment. Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short

Job Description Job Description Date 4/2023 Location 1300 Airport Road, North Brunswick NJ Title Associate, Manufacturing Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Manufacturing Associate is responsible for the operation and set up of one (1) machine under the guidance of a seasoned operator. The position includes assisting with the setup, operation, cleaning, moving supplies and finish products and preventative maintenance of all related equipment. The Associate is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Areas of Responsibility • Ensure full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed to ensure product specifications and tolerances are met in compliance with company standards and regulatory requirements., • Ensure that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Perform all material handling of products and components., • Correct document errors as needed on batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Work extended hours and occasional weekend overtime., • Other duties as assigned. Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: • High school graduate or GED equivalent., • No prior experience required., • Operates one (1) machine under guidance of a seasoned operator. Certifications, Licenses, Credentials: • N/A Skills & Ability • Able to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Mechanically inclined to understand inner workings of equipment., • Able to read and write basic English to understand the industry regulated instruction sheets and learn all cGMP’s and OSHA standards. Physical Requirements (lifting, etc.): • Able to lift up to 50 lbs.; occasionally lift and move up to 75 lbs., • Stand and walk on the production floor for a minimum of 6 hours per shift., • Use hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, safety shoes, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. 1st shift 6:00 AM to 4:15 PM

Job Description Job Description Date 03/2018 Location 1300 Airport Road, North Brunswick NJ Title Supervisor, Warehouse Department Warehouse Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt Non-Exempt Role Overview This position is responsible for planning, coordinating, and managing all activities of those employees on the warehouse floor. In addition, the Warehouse Supervisor is responsible for supervising warehouse specialists, order pickers and forklift operators. The Warehouse Supervisor will support the Receiving Clerk in managing the daily freight schedule based on customer and inventory needs. Safety, sanitation, housekeeping, GMP standards, problem solving ability as well as good employee relations are considered key elements to success. They will need to coordinate and partner with other departments to maintain schedules and effect necessary changes and revisions. Areas of Responsibility Warehouse • Ensures that timelines are met by distributing workload in accordance with changing priorities., • Ensures operation of equipment by coordinating, preventative maintenance, repairs; and evaluating new equipment and techniques, • Evaluates/solves production problems by reviewing the area of concern, developing potential solutions, technically evaluating, or testing the solutions, and preparing recommendations for management., • Maintain a work environment which fosters teamwork and supports the company’s efforts to continuously improve processes., • Prepares production reports and variance explanations, and accurately complies and files, Inventories, and order production supplies, • Interacts with multiple functions and shifts within the operation Quality • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Follow batch records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Complete necessary Activity Reports for management., • Monitor the flow of paperwork from Receiving to Inventory Control Specialist for timely data entry., • Resolve discrepancies with shipping, invoices, packing slips, and receiver reports., • Ensure products are staged for counting and inspection., • Ensure products are stored properly to conserve space and comply with safety procedures., • Oversee the rotation of inventories within the warehouse. People • Foster a collaborative environment in which diverse backgrounds are respected and valued., • Establish and maintain effective relationship with your peers, team, and senior managers in order to communicate effectively., • Provides clear direction & expectations for direct reports and assures that tasks & responsibilities are clear., • Sets goals and objectives in alignment with the organization for self and direct reports: Creates action plans, sets milestones, and delivers progress reports and developmental plans for team members., • Develop employees that contribute to the daily success of the line and can be successful in the supervisor’s absence., • Maintains open lines of communication with employees, peers, and management., • Assumes responsibility for the efficient, timely, and accurate completion of warehouse functions, • Learns and understands specific manufacturing operations sufficiently and is able to provide support in other areas as needed., • Evaluates performance of employees and creating corrective action plans where appropriate., • Assists with personnel decisions including hiring, terminations, attendance management, wage decisions, transfers, and promotions., • Interpret and explain the policies of the USPL Handbook so employees can understand the application of each policy as well as management’s purpose for each policy., • Apply all company policies fairly and consistently across departments and develop a relationship of trust and transparency with their employees., • Identify strengths and weaknesses of all associates on their team to ensure optimal performance; knows which employees they can assign additional tasks to and which need closer scrutiny. Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Responsible for ensuring each employee works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems., • Responsible for maintenance of warehouse equipment, providing both preventive maintenance programs and communicating all necessary repairs to Director of Facilities. Ensure that the warehouse personnel have safe, efficient equipment in order to perform the distribution functions, • Responsible for warehouse safety programs in order to provide a safe and clean workplace for employees and within the regulations of all OSHA local and state regulations. Ensure all associates are trained and following all standard operating procedures. Other duties as assigned Requirements Education & Qualification: • High school graduate or GED equivalent; BA degree preferred, • 7+ years Supervisory experience, • Minimum of four (4) years of work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries; 2+ years in distribution/warehousing Certifications, Licenses, Credentials: • · Valid driver’s license Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Mechanically inclined to understand the inner workings of the equipment., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Must have attention to detail. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 2nd shift - 3:00 PM to 11:30 PM

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Proven ability to lead warehouse personnel and manage daily operational activities. Distribution Center Warehouse Operations Manager Marketing Message Join a leading Middlesex County, NJ organization providing product fulfillment and eCommerce solutions. This is an opportunity to lead warehouse oper

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

This position is ideal for an experienced pharmacy operations professional, Pharmacy Technician, or healthcare operations leader with a strong background in workflow coordination, compliance support, multi-site operations, staff training, and cross-functional collaboration. The Pharmacy Operations M

Christensen Recycling is hiring a reliable, detail-oriented Office / Scale Operations & Roll-Off Scheduling Closing Manager to help keep our daily operation organized, accurate, and moving. Office / Scale Operations & Roll-Off Scheduling Closing Manager. This is an operations-control position in a

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Manager, Customer Communications Operations.

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

We are seeking a reliable and professional Customer Service Representative to support daily logistics and communication operations. Utilize computer programs such as Microsoft Word and Excel to support daily operations. Manage end-to-end logistics operations including inventory control, order fulfil

Customer Service Representative.Are you a people person? Do you love helping others? U-Haul is in search of friendly, motivated people for the position of Customer Service Representative.As a Customer Service Representative, you will work as part of a supportive team to be the face of U-Haul company

Customer Service Representative - Marc Hughes State Farm.Are you outgoing and customer-focused? Do you enjoy working with the public? If you answered yes to these questions, working for Marc Hughes State Farm may be the career for you!.No insurance experience needed.Establish customer relationships

Customer Service Representative.Location: Edison, NJ 08817 Duration: 08/01/2023 till 11/30/2023 Shift hours 8:00AM EST- 8:00PM EST.Responsible for ensuring all orders received by phone, fax, email or other sources are processed and acknowledged accurately and promptly upon receipt.Ensure that all cu

Ability to work well and consult with associates at all levels and contribute to a positive work environment.Ability to stand and walk for the majority of work shift, frequently bend, squat and twist, lift up to 50 lbs.Reasonable accommodations may be made to enable individuals with disabilities to