Trabajos arm en Glen Cove, New YorkCrear alertas

Job Description General Summary We are seeking a skilled HVAC Technician to join our team to be responsible for the installation, maintenance, repair, and servicing of heating, ventilation, and air conditioning systems. The ideal candidate will have a strong technical background, excellent problem-solving skills, and the ability to work independently and as part of a team. The HVAC Technician will ensure optimal performance and safety of HVAC systems in compliance with industry standards and regulations. Installs, maintains, services and repairs environmental control systems, utilizing knowledge of refrigeration theory, pipefitting and structural layout. Essential Duties and Responsibilities • Installation, service, troubleshooting and repairs including but not limited to; chillers, air handling units, controls, package units, split systems, exhaust fans, refrigerators, freezers, hot/chilled water pumps. Involvement in Site’s predictive maintenance program so previous experience is highly desirable., • Tasks ranging from operation of systems to the examination and evaluation of equipment to determine needed repairs, • Installs refrigeration and air conditioning systems by positioning compressors, motors, condensers, humidifiers, evaporators, heaters and other components in accordance with design specifications., • Charges refrigeration systems with refrigerant gas tests for leaks., • Starts unit and adjusts it for proper cut-in and cut-out of refrigeration units, humidifiers, heaters, air cleaners, and circulating pumps., • Adjust systems for optimal performance., • Maintains refrigeration and air conditioning systems by checking performance and determining problems. Repairs, adjusts, or replaces defective elements., • Installs, maintains and repairs the electrical and pneumatic systems associated with refrigeration and air conditioning equipment from the safety switch throughout the equipment., • Installs, maintains, repairs, operates all types centrifugal and reciprocating refrigeration/air-conditioning systems; also all types of pneumatic/electro-mechanical temperature controls., • Performs necessary plumbing procedures to ensure operation of systems and equipment, • Performs preventive maintenance., • Involvement in Site’s predictive maintenance program., • Performs other duties and shift coverage, as required. Knowledge, Experience and Skill Requirements • Must have EPA certification per CFR part 82f (Universal preferred) for servicing and recovery of refrigerants., • Ability to read blue prints, sketches, and specifications pertaining to air conditioning and refrigeration systems; to follow oral instructions; to use shop mathematics; to lay out work., • Minimum 4 years of experience performing the specific craft function or certification from a recognized trade school., • Requires broad trade knowledge of mechanical principals on standard shop methods of the Refrigeration and Air Conditioning Mechanic Trade., • Experience and/or certification in one or more predictive maintenance technologies (vibration analysis, infrared, ultrasound, etc.)., • High level of computer aptitude and knowledge of MS Office applications (Word, Excel, etc.)., • Ability to interpret and develop technical reports., • Able to operate testing equipment for the systems; to use all tools and equipment necessary to this trade; to follow standard methods and procedures for the most part, but on occasion to have the ability and knowledge to perform the unusual and difficult operations. Physical, Environmental and Sensory Requirements • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. Disclaimer: CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The minimum pay rate for this position is $35.62. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

🚨 Corporate Associate | Fully Remote (Nationwide) – Up to $275k Location/Schedule: Fully Remote (Anywhere in the US) Base Salary: Up to $275k (plus performance bonuses) Practice: Corporate – Sophisticated corporate transactions, private investment funds, M&A, venture financings, and general corporate advisory work for financial services clients and growing companies. What stands out about this opportunity: • Outstanding Private Investment Funds Practice – Join a highly regarded firm with a nationally recognized private funds practice, handling complex, high-value matters for clients in the financial services sector., • Broad & Versatile Experience – Work across litigation, corporate, real estate, regulatory, tax, and estate planning — building a well-rounded skill set in a dynamic, multi-disciplinary environment., • Expanding Litigation & Corporate Synergies – Benefit from the firm’s growing litigation arm while focusing on corporate work, gaining exposure to dynamic matters and sharpening your overall practice., • Direct Client Impact in Financial Services – Work closely with clients at the intersection of law and business strategy, delivering practical advice to sophisticated institutional and corporate clients., • Strong Compensation in a Flexible Remote Environment – Competitive base up to $275k with performance bonuses in a firm that supports remote work, offers excellent work-life balance, and invests heavily in your long-term success. Duties and Responsibilities: • Draft and negotiate corporate documents for fund formations, M&A, venture financings, and joint ventures., • Advise clients on governance, securities compliance, and transactional structuring., • Manage deal processes from term sheets through closing and post-closing matters., • Collaborate on cross-practice matters involving regulatory, tax, and real estate elements. Core Requirements (Flexibility for Exceptional Candidates): • JD and active bar admission (NY preferred)., • 3–7+ years of corporate transactional or funds experience with strong drafting and negotiation skills. No one fits every box perfectly - if you’re a strong Corporate attorney seeking meaningful work and real growth, let’s talk confidentially. 📩 michanne.vanzyl@wearerevolution.co 📅 _

Job Description General Summary Operates, maintains and repairs an operational engineering plant which provides a facility with such services as heat, air-conditioning, steam, and emergency power. Performs preventative and corrective maintenance on plant equipment. Operates one or more boilers, chillers, generators and associated equipment to produce steam, chilled water and electrical power for the facility. Essential Duties and Responsibilities • Observes and interprets reading on gauges and meters which register various aspects of boiler operations and the Central Energy Plant (CEP) Operations., • Adjusting controls to ensure safe and efficient operations of the plant that meets the demands for the utilities provided., • Logs the various aspects of the system’s operation, keeping the boilers, chillers, machinery and other system equipment in good working order., • Maintains the log, in which various aspects of plant operations are recorded., • Required to be skilled in the repair of rotating machinery, steam systems, compressed gases and water treatment systems, (i.e., clean, oil, repair or assist in repairs to plant equipment)., • Must be fully knowledgeable of the required actions in the event of the loss of any of the regularly supplied utilities services., • Treatment of cooling tower and boiler water with chemicals and analyze the water for such things as acidity, conductivity, hardness, biological growth and alkalinity., • Maintain the general cleanliness and appearance of the Plant., • Must be knowledgeable in troubleshooting, disassembling, tube cleaning and reassembling of industrial sized boilers and chillers., • Assists others as part of the maintenance team as required and performs other duties assigned according to personal qualifications., • Other duties as assigned. Knowledge, Experience and Skill Requirements • Excellent oral and written communication skills., • Knowledge of computer software programs to include Word, Excel, Power Point and Outlook required., • Experience with a Facility Computerized Maintenance Management System software (CMMS) highly desired., • High School Graduate, technical or trade school certificate in related field desired., • Previous experience in operating and maintaining industrial sized boilers, chillers and associated equipment., • Shall possess a current Stationary Engineer’s license from a city, state, or nationally recognized entity or obtain within 2 years of employment for high pressure steam plant operation. Work Environment • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. We maintain a drug-free workplace and perform pre-employment substance abuse testing. CBRE Government and Defense is thrilled at the opportunity for you to apply to one of our roles. The rate for this position is $49.94. This position may also be eligible for a wide range of benefits based on applicable bargaining unit agreements. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES.

Job Description Position Summary: WAC Group is seeking a Firmware Engineer to support the development, testing, and maintenance of embedded firmware for connected lighting and IoT products. The ideal candidate has hands-on experience with C/C++ on microcontrollers, is comfortable debugging hardware and software issues, and is eager to grow into broader ownership of firmware features, communication protocols, and production support. This role will work closely with senior firmware, hardware, app, cloud, QA, and manufacturing teams to deliver reliable smart products for commercial and residential markets. Key Responsibilities: • Design, implement, and maintain embedded firmware in C/C++ for ARM Cortex-based microcontrollers, including STM32, Nordic nRF, ESP32, and similar platforms, under guidance from senior engineers., • Support development of wireless and wired device communication features using technologies such as Bluetooth, Thread, Wi-Fi, RS485, DMX512/RDM, DALI/D4i, UART, SPI, I2C, and proprietary protocols., • Debug firmware issues using standard tools such as JTAG/SWD debuggers, oscilloscopes, logic analyzers, protocol analyzers, and serial console tools., • Assist with bootloader, OTA firmware update, device provisioning, encryption, and key management features according to established architecture and security practices., • Develop device-side interfaces and services that support integration with mobile apps, cloud platforms, manufacturing systems, and internal test tools., • Interface with analog and digital sensors, drivers, radios, power circuits, and other embedded hardware components., • Contribute to manufacturing test solutions, hardware validation tools, and Python-based automated test frameworks., • Use established build systems, CI/CD workflows, GCC, IAR, Git, Jira, and related development tools to produce reliable release candidates. Critical Success Factors: • Deliver well-structured, testable, and maintainable firmware for smart modules, gateways, and connected devices while following established architecture and coding standards., • Contribute to reliable communication features for wireless and wired protocols, including Bluetooth Mesh, Wi-Fi, DMX512/RDM, RS-485, DALI/D4i, and related smart lighting technologies., • Demonstrate steady growth in technical ownership by writing clear code, participating in reviews, resolving defects, and supporting unit, integration, regression, and system-level testing. Requirements: • BS in Electrical Engineering, Computer Engineering, Computer Science, or equivalent industry experience., • Minimum 5 years of experience in embedded firmware engineering, or equivalent hands-on project experience for exceptional candidates., • Working proficiency in C/C++ for resource-constrained embedded systems., • Experience with 32-bit ARM microcontrollers and common embedded development/debugging workflows., • Familiarity with in-circuit debugging techniques using JTAG, SWD, serial consoles, and related tools., • Working knowledge of hardware communication protocols such as SPI, UART, I2C, BLE/Mesh, DMX, DALI, Wi-Fi, or similar technologies., • Hands-on lab experience with hardware bring-up, prototyping, and debugging using oscilloscopes, logic analyzers, protocol analyzers, or similar instrumentation., • Basic proficiency in scripting languages such as Python or Bash for automation, tooling, and test support., • Experience with software configuration and issue management tools such as Git and Jira., • Understanding of design for manufacturability, testability, reliability, and cost is preferred., • Experience supporting product validation, manufacturing test, or production troubleshooting is preferred., • Strong technical documentation, written communication, and verbal communication skills., • Ability to follow structured engineering processes while applying creative problem-solving to technical challenges., • Willingness and ability to travel domestically and internationally as required., • Ability to collaborate with third-party development partners and external engineering teams is preferred., • Mandarin language proficiency is a plus. We recognize people as our most valuable asset. Our competitive salary and benefits package include paid time off; medical & dental coverage (including family coverage), vision, life, 401(k); tuition assistance; and continuous training and development. For immediate consideration, please submit your resume as directed. Due to the high volume of applications, only candidates who meet the qualifications will be contacted. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities.

Job DescriptionElectrical Engineer – Autonomous Weapons & Drone Systems Onsite | Great Neck, NY Full-Time | U.S. Citizenship or ITAR Eligibility Required Be part of a mission-driven team redefining autonomous defense. Wild West Systems builds next-generation drones and munitions for America and her allies - fast, affordable, and superior by design. As an Electrical Engineer, you'll help design, prototype, and deploy electronics for autonomous systems that change how the battlefield operates. ???????? About Wild West Systems Wild West Systems is a defense technology startup breaking conventions in autonomous edge defense through modular, AI-powered weapon platforms - designed, built, and launched in the USA. We arm the future warfighter with precision, affordability, and swagger. If you thrive on speed, grit, and purpose - welcome to the frontier. Why This Role Matters As an Electrical Engineer at Wild West Systems, you'll design the electronic backbone of our drone and munitions platforms - taking concepts from whiteboard to field-ready systems. You'll work directly with seasoned engineers across hardware, software, and mechanics to bring ideas into reality. You'll be part of a small, fast team where every design, every wire, and every test matters. What You'll Do • Electrical Design: Develop electronic systems from schematic to PCB layout and production release (Altium preferred)., • Prototype & Test: Support bring-up and validation of boards, including signal integrity checks, power testing, and troubleshooting., • Power Systems: Design and manage battery management, voltage regulation, and power distribution systems., • Integration: Collaborate with mechanical, propulsion, and firmware teams to ensure seamless system function., • Documentation: Produce detailed schematics, BOMs, and test procedures for builds., • Continuous Improvement: Participate in design reviews, trade studies, and field tests to refine performance and reliability., • Hands-On Work: Solder, wire, assemble, and debug - your designs don't just live in CAD.What You Bring Required: • B.S. in Electrical or Electronics Engineering (or related field), • 2–4 years of hands-on experience designing and testing electronic hardware, • Experience with PCB design tools (Altium strongly preferred), • Solid foundation in analog/digital circuits, grounding, and power integrity, • Comfortable with lab tools - oscilloscopes, logic analyzers, soldering equipment, • Familiar with embedded hardware (MCUs, sensors, CAN/SPI/I²C/UART comms), • Thrives in high-speed, hands-on, high-ownership environments, • U.S. citizen or ITAR-compliant status (green card, refugee/asylee, or eligible authorization) Preferred: • Experience in defense, aerospace, or robotics hardware design, • Knowledge of military standards (MIL-STD-461, MIL-STD-810), • Exposure to motor drives, ignition systems, RF, or wireless links, • Familiarity with DFM/DFA and rugged design principles, • IPC-related experience (IPC-A-600, CID/CID+), • Experience with field testing or manufacturing support Why You'll Love It Here, • Mission That Matters: Build systems protecting America and her allies., • True Ownership: Small team, direct impact, zero bureaucracy., • Elite Benefits:, • 100% coverage for employee health, dental, and vision, • 90% coverage for spouse/family, • Culture of Action: Fast decisions, real results, no wasted time.Additional Info, • Onsite position based in Great Neck, NY, • Must meet ITAR requirements, • Uses E-Verify for work authorization, • No staffing agencies - direct applicants only, • Equal Opportunity Employer ???? Apply: Recruiting@wws.inc

Job Description AI / Perception Lead Engineer Company Overview Wild West Systems is an American defense technology company with the mission to equip the civilized world with superior and affordable arms and advanced technologies – to dominate the battlefield of present and future threats, in a new era of asymmetrical warfare. We fuse versatile domain experience with novel approach and creativity to change the paradigm of defense – both for military arenas and civilian soft targets. We're an early stage startup, rapidly moving and growing. General Qualifications Deep love for America and passion for Wild West System's mission. Self-starter, capable of performing tasks as an individual as well as working well in a team. Servant-leader mentality, extreme ownership, willing to participate in different and rapidly changing projects in a dynamic environment. Bias for action. ITAR REQUIREMENT: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Position Overview We are seeking an AI / Perception Lead Engineer to own and deliver the perception layer of our autonomy stack. This is a high-impact role focused on building real-time computer vision and sensor fusion systems that operate reliably on constrained edge hardware in dynamic environments. This is not a research-only role. You will be responsible for taking perception systems from concept → prototype → field deployment, working across software, hardware, and real-world testing. Responsibilities • Develop and deploy real-time object detection, classification, and tracking systems, • Optimize models for edge deployment (Hailo, Jetson, ARM, etc.), • Build multi-sensor perception pipelines (camera, lidar, etc.), • Improve robustness under real-world conditions (motion blur, occlusion, lighting), • Integrate perception outputs into downstream autonomy systemsRequired Skills and Experience, • Strong experience with modern CV models (YOLO, transformers, tracking systems), • Experience training, fine-tuning, and deploying models, • Experience with edge inference optimization (TensorRT, ONNX, etc.), • Strong Python + C++ (or Rust) skills, • Experience working with real-time video pipelinesPreferred Skills and Experience, • Experience with Hailo or similar accelerators, • Experience with multi-object tracking (ByteTrack, DeepSORT), • Experience with Roboflow or similar dataset pipelines, • Experience deploying models on embedded systemsWork Location This role is assigned onsite at our Great Neck, New York or Leander, Texas location. In-person work is required. Benefits We are always looking for good people! Wild West Systems is committed to providing its employees with competitive salaries and benefits to increase employee satisfaction and productivity. Health Insurance: 100% coverage for employees, 90% for spouse/family Vision and Dental: 100% Coverage 401(k): Available to all employees *We do not work with staffing companies. Direct applicants only*

Job DescriptionDescription: Job Purpose: The Recruitment Specialist will be responsible for building and maintaining strategic community partnerships to support the organization’s growth, with a focus on recruiting children and families into the program. A successful Recruitment Specialist will be energetic and self-driven, outgoing, and personable with the ability to work independently and as a part of a cohesive team. Confidence in public speaking and presenting to large and small audiences is a critical part of this role. Duties & Responsibilities: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Conduct 70 to 100 outreach and orientation phone calls daily., • Build awareness of the organization through presentations, speaking engagements, in-person meetings, and networking with schools, community organizations, corporations, faith-based institutions, and other relevant groups., • Manage and develop partnerships: Design and implement a recruitment strategy tailored to targeted Long Island neighborhoods., • Generate applications: Implement a strategic plan to engage youth and families, assisting them throughout the enrollment process., • Attend external events, including fairs, community board, and neighborhood meetings., • Strengthen the brand: Plan and execute community events to promote the organization’s mission and mentorship needs., • Represent the organization as a spokesperson at community events and potential media engagements., • Collaborate with the Digital Content Creator to create digital recruitment materials and social media campaigns., • Assist in developing marketing materials for recruitment efforts., • Conduct orientation sessions for new participants., • Attend and participate in agency-sponsored events., • Additional duties as assigned. Requirements: Skills & Qualifications • Prior sales experience preferred., • Experience working in Youth Development is a plus., • Excellent public speaking skills, confident in presenting to large audiences., • Strong relationship-building skills through networking and community outreach., • Bilingual in English and Spanish highly preferred., • Must possess a valid NYS Driver’s License with a clean driving record., • Ability to travel throughout Nassau and Suffolk Counties., • Willingness to work a flexible schedule, including nights and weekends., • Strong interpersonal, diplomatic, and persuasive skills to effectively represent the organization to the public. Schedule: Wednesday: 12:30 PM - 8:30 PM Thursday: 12:30 PM - 8:30 PM Saturday: 9:00 AM - 5:00 PM Rate: $25/Hour Physical Requirements: • Light work: Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for Sedentary Work and the worker sits most of the time, the job is rated for Light Work., • Standing: Remaining upright on the feet, particularly for sustained periods of time, • Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another, • Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly FLSA: Non-Exempt Big Brothers Big Sisters of Long Island provides equal employment opportunities to all applicants and employees and strictly prohibits any type of harassment or discrimination in regards to race, religion, age, color, sex, disability status, national origin, genetics, sexual orientation, protected veteran status, gender expression, gender identity, or any other characteristic protected under federal, state, and/or local laws. Consistent with the Americans with Disabilities Act (ADA), it is the policy of Big Brothers Big Sisters of Long Island to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact Human Resources. Your employment with Big Brothers Big Sisters of Long Island is on an at-will basis, meaning either you or the Company can terminate the employment relationship, at any time, for any or no reason, and with or without cause or notice. As an at-will employee, your employment with Big Brothers Big Sisters of Long Island is not guaranteed for any length of time.

Job DescriptionWe are seeking a skilled and detail-oriented C-Arm / X-Ray Technologist to join our clinical team. The ideal candidate will perform high-quality diagnostic imaging procedures, with emphasis on fluoroscopic C-arm operation for interventional spine procedures and general orthopedic radiography. Key Responsibilities • Operate C-arm fluoroscopy equipment during minimally invasive spine procedures, joint injections, and pain management interventions, • Perform diagnostic radiographic X Ray examinations of the musculoskeletal system, • Position patients appropriately to obtain optimal imaging while ensuring radiation safety, • Maintain and calibrate imaging equipment according to manufacturer specifications, • Follow ALARA principles and radiation safety protocols, • Prepare examination rooms and ensure sterile technique compliance during procedures, • Document procedures accurately in EMR system, • Collaborate with physicians, physician assistants, and clinical staff to ensure efficient patient flow, • Maintain patient privacy and HIPAA compliance at all timesRequired Qualifications, • Current New York State Radiologic Technologist License (ARRT certification required), • Minimum [1-2] years of experience operating C-arm fluoroscopy equipment, • BLS/CPR certification, • Strong knowledge of radiation safety protocols and dosimetry, • Experience with orthopedic and spine imaging preferred, • Proficiency with PACS and EMR systems, • Excellent communication and patient care skills, • Ability to work efficiently in a fast-paced clinical environmentPreferred Qualifications, • Previous experience in orthopedic or pain management setting, • Familiarity with interventional spine procedures, • Bilingual (English/Spanish) is a plus

Job Description ESSENTIAL DUTIES and RESPONSIBILITIES: • Housekeeping Duties, • Clean windows, glass doors and mirrors in the gym., • Wipe down equipment, doors and floors regularly., • Empty all trash receptacles daily., • Sweep, vacuum and mop floors/stairwells/staircases., • Shampoo the carpet as needed., • Dust and clean exercise equipment., • Clean and disinfecting the toilets, shower stalls and changing areas., • Pick up debris and spillage promptly., • Restock the locker room and toilets., • Clean and disinfect food preparation areas., • Maintain all supplies and cleaning equipment in good condition in designated storage areas., • Clean all MMA areas including mats, octagon and bags., • Change light bulbs., • Immediately report any areas of concerns to management (such as leaks, malfunctioning fixtures and equipment, slow, • drainage, any mold or infestations)., • Respond to member requests and report any member complaints immediately to management., • Complete checklists and logs in a timely manner., • Other duties as assigned.ORGANIZATION RELATIONSHIPS:, • Janitorial reports to the Operations Manager. This position may interact with all levels of management and staff within Corporate and Field offices, in the clubs, and within the Operations team.REQUIRED QUALIFICATIONS:, • Must be able to work quickly, thoroughly and independently, • Must know and understand the proper use of chemicals and cleaning materials, • Possess extreme attention to detail regarding the cleanliness and safety inside the gym, • Displays and promotes a positive and cheerful attitude towards all members and staff, • Adheres to all safety rules, • Proficient in English, • Adhere to meal and rest break periods and must clock in and out for all shift times, • Able to work overnight shifts as neededMinimum certifications/educational level:, • Must be at least 18 years old, • High school diploma or GED preferredMinimum experience:, • Able to effectively communicate verbally and in writing, • Able to understand and follow verbal and written instructions, • At least 6 months experience in janitorial or housekeepingPhysical Requirements:, • Exerting up to 25 pounds of force frequently, and/or a negligible amount of force constantly to move objects, • Required to stand, reach with hands and arms, stoop, kneel, crouch, or crawl, • Ability to stand and remain on your feet for a full shiftPerks:, • Free Champion Gym Membership, • Employee discounts at Gym Store, Arm Bar and more!, • Fun monthly employee contests and incentives