Construction technician jobs in Elizabeth, New JerseyCreate job alerts

Job Description General Summary We are seeking a maintenance worker to assist the superintendent in maintaining the physical integrity of the property. This involves insuring a safe, secure, and comfortable living environment for residents, visitors and staff. The maintenance worker will carry out assigned duties in a safe manner and other duties as requested by the Superintendent. Essential Job Functions/Responsibilities: A building maintenance worker must possess a variety of skills encompassing most of the construction trades, handling that require basic skills as an electrician, carpenter, plumber, mechanic, painter, HVAC technician and roofer, as well as be able to perform all the responsibilities of a porter, should the situation warrant. The building maintenance worker must always remain aware of their limitations and request the services of a professional when the worker’s lack of expertise requires it. Maintenance workers might touch up paint in the lobby, repair a faulty house lock, troubleshoot an open electrical short and replace a faucet, carry an extension ladder, use a 14-pound sledgehammer, all in the same day. • Plumbing: includes the repair, replacement or installation of faucets, pipes, toilets, garbage disposals, dishwashers, water-dispensing refrigerators, and washing machines., • Electrical: includes the troubleshooting, repair, replacement or installation of power switches, fuses, wall sockets, ceiling lights, and ceiling fans., • Drywall/Plaster repair: includes filling in small holes caused by nails and minor dings from normal wear and tear most performed between the time a tenant vacates a unit and a new renter assumes occupancy., • Painting: includes minor touch-ups following damage repair and new coats of paint applied to unit walls between the time a tenant vacates a unit, and a new renter assumes occupancy., • Appliance repair: includes the repair, replacement or installation of major household appliances, such as refrigerators, dishwashers, range ovens, washers and dryers, and air conditioners., • Ground keeping includes mowing grass, pulling weeds, trimming and pruning trees and shrubs, watering lawns and plants, replacing light bulbs along pathways and parking areas, sweeping or raking leaves, and tidying up bark or other ground covering., • Cleaning/housekeeping includes maintaining a tidy appearance in shared community locations, such as the leasing office lobby, clubhouses, and fitness or recreational areas. Also includes cleaning fixtures, floors and other surfaces in vacated units before new renters assume occupancy., • Snow removal: includes shoveling, blowing or plowing snow away from covered walkways and driveways, and laying down rock salt atop icy surfaces to prevent slipping., • Customer service: includes professional, prompt and courteous correspondence with renters when scheduling and providing maintenance services, and with contracted vendors that provide additional facility services., • Time management: includes maintaining an organized scheduling and tracking system, usually on a computer, to effectively complete all maintenance requests in a timely manner and in the order by which they were received or by level of urgency., • Represent the Company in a professional manner as reflected by personal appearance, attention to detail, jobsite cleanliness, customer service and safety., • Document and record all work, purchases, deliveries, accidents, and any other related items in a timely, professional manner., • Respond to emergencies as needed including nights and weekends, being on-call with a cell phone., • Record all inspections and related maintenance on appropriate forms in an accurate and timely manner., • Prioritize all work to minimize vacancy loss, prevent property damage, and provide service to residents., • Inventory Control: Be knowledgeable of inventory levels of spare parts and supplies and inform the Superintendent of shortages., • Appearance: Neat, clean well-groomed appearance, • Education: High School Graduate or G.E.D. Read, write, & speak English, • Proficient knowledge: Knowledge of carpentry and building maintenance, safe operation of basic hand and power tools, oil burner systems, heating and ventilation systems, electrical systems, appliance maintenance and maintenance, workplace safety and safe lifting and handling procedures, as well as the knowledge of when to contact qualified service personnel., • Skills: An employee in this position must be knowledgeable and skilled in a variety of trades (see above), • Abilities: Applicant must have the physical strength to lift cleaning materials and heavy equipment, physical stamina for being on their feet all day, • Other characteristics such as personal characteristics: Interpersonal skills are necessary for interacting with building occupants and other staff members., • Professional Certification: FDNY certificates of fitness for operating a low-pressure boiler, residential sprinkler systems helpful., • Experience: 3 years’ experience in general building maintenance., • Excellent problem solving and conflict resolution skills., • Experience working with people of different income levels and ethnic backgrounds. The building maintenance worker has a physically strenuous and demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The building maintenance worker will have to work in all weather conditions and must be prepared for both extreme heat and cold. • Have constant need (66% to 100% of the time) to perform the following physical activities:, • Bend/Stoop/Squat/Kneel: Perform routine maintenance/repairs, pick up tools and needed equipment., • Climb Stairs: Service requests, make-ready needs for 2nd and 3rd floor apartments., • Push or Pull: Move equipment, appliances, open and close doors, etc., • Reach Above Shoulder: Perform routine maintenance/repairs, stock and remove equipment, parts, etc., • Climb Ladders: Perform routine maintenance/repairs., • Grasp/Grip/Turning: Handle tools and equipment, perform routine maintenance/repairs., • Finger Dexterity: Handle tools and equipment, perform routine, • Lifting/carrying (supplies, replacement parts, ladders, etc.):, • Over 150 lbs.: Rare need (less than 1% of the time), • 75 – 150 lbs.: Occasional need (1% to 33% of the time), • 25 – 75 lbs.: Frequent need (33% to 66% of the time)

Job Description Overview Circet USA is the leading provider of Network Services in North America, and we're looking for talented professionals to join our team. We specialize in engineering and construction services delivering comprehensive solutions across Inside Plant, Outside Plant, and Wireless networks to meet the evolving infrastructure needs of our customers. With nearly 50 years of industry experience, we work with major telecom service providers, MSOs, cloud service providers, and utilities. At Circet USA, you'll have the opportunity to make an impact by helping to create customized solutions that address our clients' unique challenges. If you’re passionate about innovation and thrive in a dynamic environment, we’d love to hear from you. Circet USA’s benefits package includes the following: • Medical, Dental, and Vision insurance, • Digital Health & Wellness Support, • Critical Illness, Accident, & Hospital Insurance, • Short-term & Long-term disability, • Group term & Voluntary life insurance, • Flexible Spending and Health Savings Accounts, • Paid Time Off & 401K, • Company Discount Website Responsibilities A Drive Test Technician is responsible for executing mobile and stationary RF testing to validate wireless network performance. This role supports engineering teams by collecting field data to optimize coverage, capacity, and quality of service across 5G technologies. This position requires 100% travel. This position will support the Northeast region which consists of the following states: • MN, VT, NE, MA, RI, CT, NY, NJ, PA, DE, MD, DC, VA ESSENTIAL DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned: • Drive Testing: Operate drive test equipment (e.g., TEMS Pocket, X-CAL, QXDM) in vehicles or on foot to collect RF data across designated routes and clusters., • Perform a Speed Test, • Data Collection & Upload: Capture logs for RSRP, SINR, PCI, throughput, and scanner data. Upload results to centralized servers for post-processing and validation., • Properly follow the test files naming conventions., • Reporting: Communicate with Circet and client point of contacts throughout the process and to escalate issues as necessary. Qualifications * • High school diploma or equivalent required; technical certifications preferred., • Familiarity with wireless technologies: LTE, VoLTE, CDMA, 5G, MIMO, Carrier Aggregation strongly preferred., • 1–3 years of experience in RF testing or field technician roles desired., • Experience with DAS, small cells, or CRAN installations is beneficial., • Must have good computer skills., • Must have a valid U.S. driver’s license and clean driving record., • Willingness to travel and work flexible hours, including weekends. Pay Range in the United States: $20/hr - $26/hr based upon geography, skills, and experience. May also be eligible for performance incentive opportunity based on company and individual goals and performance.

Job Description Job Purpose The Maintenance Technician assists in performing highly diversified duties to install equipment, troubleshoot, and maintain production of all JESPY facilities and equipment according to safe and productive maintenance systems and processes. This position is responsible for staying abreast of current trends as they relate to the department and staying aligned with best practices. This Maintenance Technician is also responsible for assisting in the monitoring of all construction, repairs, etc., of all agency sites. This position assists in the monitoring of all JESPY vehicles, including registration and insurance state compliance as well. Essential Functions • Responsible for maintenance (interior and exterior) of all JESPY properties, • Evaluate the need for renovations, • Assist in establishing budgetary guidelines with the Director of Operations for repairs and capital improvements, • Obtain estimates for all contracted work on JESPY property, • Assist in monitoring of all project progress through completion, • Coordinate purchase and maintenance of all JESPY vehicles, • Cooperate with the state agencies in any inspection or investigation, • Diagnose problems, replace or repair parts, test and make adjustments., • Perform regular preventive maintenance on machines, equipment and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas., • Assist in the preparation and administration of the program budget; submit budget recommendations; monitor expenditures, • Monitor and track any expenditure on the supplied credit card and report all expenditures to the finance department, • Other duties as assigned by the Executive Office Competencies • Customer/Client Focus, • Technical Capacity, • Ethical Conduct, • Communication Proficiency, • Results Driven, • Initiative, • Results Driven, • Adhere strictly to HIPAA requirements and all agency confidentiality guidelines., • Establish positive, balanced relationships with clients, as demonstrated by:, • treatment of individuals with respect and dignity and in an age and culturally appropriate manner;, • a commitment towards the individual's rights and responsibilities; and, • Other responsibilities that may arise within the job scope, • Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Educational Requirements • Extensive experience with precision measuring instruments or electronic testing devices, • Extensive experience performing routine maintenance, • Strong hydraulic, pneumatic, mechanical and industrial skills with some PLC experience and HVAC a plus Skills/Abilities • Skilled in the use of hand and power tools, • Ability to check blueprints, repair manuals, or parts catalogs as necessary, • Ability to use common tools such as hammers, hoists, saws, drills, ad wrenches,, • Strong organizational and follow up skills, • Eye for detail, • Professional presentation and attitude, • Strong time management skills, • This is a full-time position, and hours of work and days may vary Special Working Conditions/Physical/Requirements – Working Environment • While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud., • Must be available for coverage on some weekends and after 5pm when required., • Must hold a high school diploma, • Valid New Jersey driver's license is required, • Must hold CPR/First Aid Valid Certification, • Successful clearance of NJ background check, • Successful clearance of Drug Screening, • Has fulfilled the necessary training requirements and is in good standing in order to bill Medicaid for Support and Community Care Waiver (CCW) Services and CDS Physical Demands • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Job Description Traffic Control Solutions Corp has immediate openings for Traffic Control Technician/Highway Safety Flagger positions in New Jersey for our Bayonne, Barnegat, and Williamstown locations. Call Michele at 609-961-9966 after you read below our hiring requirements, job duties, and compensation. You must fill out the questionnaire first before you call, or an initial interview cannot be performed. You can start work within a few days. Call Today! As the Traffic Control Coordinator/Highway Safety Flagman, you will be responsible for overseeing all traffic management operations for construction and consultant bridge, overhead sign structure, and geotechnical sites, and other projects requiring traffic control. You will ensure the implementation of safety measures, compliance with traffic laws, and the smooth flow of traffic to minimize disruptions. ESSENTIAL FUNCTIONS: • Operate company trucks to transport materials and equipment to job sites., • Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones., • Place temporary construction signs in work areas., • Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas., • Monitor the work zone throughout the shift to ensure items remain in their proper locations., • Collect and load traffic control items at the beginning and end of shifts., • Install, remove, and reset delineators, signs, posts, and supports., • Follow all safety rules and regulations to ensure a safe work environment., • Adhere to all Company Policies and Procedures., • Perform other work-related duties as assigned., • Valid Driver’s License, with no more than 2 points on license, and have your own vehicle to arrive at our hub location closest to you for work. Please be located within 30 minutes of our hub location to ensure meeting our hiring requirements., • Must be able to pass a background check, including a motor vehicle records check, before being hired., • Must successfully pass a drug test and meet federal DOT requirements. This includes random tests throughout employment. Marijuana is an illegal drug when driving any DOT vehicle., • Wear proper safety equipment (work boots with safety toes, a hard hat, safety glasses, and a safety vest)., • Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations., • Must be able to read and study state DOT plans and ensure traffic control plans are implemented and maintained., • Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. • Typical job site locations are within 2 hours of the dispatch hub. Starting pay is $20.00 per hour, with a mandatory 30-minute unpaid lunch break. Employees must bring lunch to work. The successful completion of the online ATSSA Flagging course must be completed within the first 30 days of employment., • After 6 months of employment and having proven the knowledge and leadership to be a TCC foreman, a TCC course will be made available, which rewards an immediate $5.00 per hour raise., • A times, our customers have projects that require us to pay our Traffic Control Technicians' prevailing wage rates. Those rates vary from $80.00 - $100.00 per hour. The jobs are offered to employees who demonstrate the work ethic, availability, and knowledge of his/her position., • Some of our customers have projects that are further than two hours away from our hub locations. These locations will be classified as travel overnight jobs. All employees are required to do at least one week's worth of these travel jobs per month, if these jobs are available. Typically, these jobs run from Monday through Thursday. For our employees to be home by Thursday evening. These jobs pay an additional $5.00 per hour, including travel hourly pay to a hotel where the job site is located at the company's expense., • Typical scheduled shifts are 70%-day, 25% night, and 5% weekends. All applicants must have availability to be scheduled for any of these shifts. Our schedule is sent out by 5 pm the previous day. Traffic Control Solutions offers a flexible shift-off policy requiring 2 weeks' notice for a shift unable to be ability for., • Traffic control solutions are required by the state of New Jersey to provide full-time, part-time, and temporary employees with up to 40 hours of earned sick leave per year to care for themselves or a loved one, including chosen family. HIRING PROCEDURE AND TIME FRAME: Once an applicant calls our office, a hiring supervisor will conduct a pre-screening interview to ensure the applicant meets hiring requirements and understands the job responsibilities. If an applicant meets the requirements, the hiring supervisor will email a hiring application to complete. Once the applicant has completed the application, an MVR must be obtained from the DMV. An MVR is given to a motorist immediately by the DMV; it is the driver's motor vehicle driving history. Once obtained, the MVR, along with the application, a copy of the driver's license, and a copy of his/her social security card, must be scanned and emailed back to the hiring supervisor using a cam scanner app on his/her phone. If all paperwork is completed and submitted and its entirety. We will immediately put you on the schedule for work. You will be required to purchase a hard hat and a class three vest. Steel-toe boots, gloves, and work pants are required safety apparel that are required to be worn on our job sites. Call Michele at 609-961-9966 between the hours of 8:00 am - 4:00 pm, Monday through Friday, and start your journey with Traffic Control Solutions today! Company DescriptionTraffic control solutions is a highway safety company, providing lane closures and flagging services for state and local projects.Traffic control solutions is a highway safety company, providing lane closures and flagging services for state and local projects.

Job Description The Facility Maintenance Technician assists in performing highly diversified duties to install equipment, troubleshoot, and maintain production of all JESPY facilities and equipment according to safe and productive maintenance systems and processes. This position is responsible for staying abreast of current trends as they relate to the department and staying aligned with best practices. This Facility Maintenance Technician is also responsible for assisting in the monitoring of all construction, repairs, etc., of all agency sites. This position assists in the monitoring of all JESPY vehicles, including registration and insurance state compliance as well. Essential Functions • Responsible for maintenance (interior and exterior) of all JESPY properties, • Evaluate the need for renovations, • Assist in establishing budgetary guidelines with the Director of Operations for repairs and capital improvements, • Obtain estimates for all contracted work on JESPY property, • Assist in monitoring of all project progress through completion, • Coordinate purchase and maintenance of all JESPY vehicles, • Cooperate with the state agencies in any inspection or investigation, • Diagnose problems, replace or repair parts, test and make adjustments., • Perform regular preventive maintenance on machines, equipment and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas., • Assist in the preparation and administration of the program budget; submit budget recommendations; monitor expenditures, • Monitor and track any expenditure on the supplied credit card and report all expenditures to the finance department, • Other duties as assigned by the Executive Office Competencies • Customer/Client Focus, • Technical Capacity, • Ethical Conduct, • Communication Proficiency, • Results Driven, • Initiative, • Results Driven, • Adhere strictly to HIPAA requirements and all agency confidentiality guidelines., • Establish positive, balanced relationships with clients, as demonstrated by:, • treatment of individuals with respect and dignity and in an age and culturally appropriate manner;, • a commitment towards the individual's rights and responsibilities; and, • Other responsibilities that may arise within the job scope, • Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Educational Requirements • Extensive experience with precision measuring instruments or electronic testing devices, • Extensive experience performing routine maintenance, • Strong hydraulic, pneumatic, mechanical and industrial skills with some PLC experience and HVAC a plus Skills/Abilities • Skilled in the use of hand and power tools, • Ability to check blueprints, repair manuals, or parts catalogs as necessary, • Ability to use common tools such as hammers, hoists, saws, drills, ad wrenches,, • Strong organizational and follow up skills, • Eye for detail, • Professional presentation and attitude, • Strong time management skills, • This is a full-time position, and hours of work and days may vary Special Working Conditions/Physical/Requirements – Working Environment • While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment and job sites can be loud., • Must be available for coverage on some weekends and after 5pm when required., • Must hold a high school diploma, • Valid New Jersey driver's license is required, • Must hold CPR/First Aid Valid Certification, • Successful clearance of NJ background check, • Successful clearance of Drug Screening, • Has fulfilled the necessary training requirements and is in good standing in order to bill Medicaid for Support and Community Care Waiver (CCW) Services and CDS Physical Demands • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Job Description Spark Car Wash Over View: Spark Car Wash is a high growth, institutionally backed express exterior car wash company serving the Northeast and headquartered in Summit, NJ. Our mission is to become the premier car wash brand in the market by providing consistent excellence to our customers and an enriching environment for our employees. Spark is in the process of launching multiple best-in-class locations with a vision of becoming the largest operator in the region. Field Technician Position Summary: As Spark continues to grow, we are actively seeking a skilled Field Technician to join our Operations team, reporting directly to the Director of Product. The Field Technician plays an integral, hands-on role in ensuring that Spark Car Wash maintains best-in-class facilities by executing a comprehensive maintenance and repair program. This work protects our equipment, ensures the safety of our team members, and ultimately delivers a cleaner car for our customers. This role will be field based, serving our growing store base in Northern New Jersey, New York, and Pennsylvania. The Field Technician is expected to travel to stores 100% of the time and be on-site at locations daily. Key Responsibilities: • Maintenance Audits: Ensure General Managers and teams complete daily, weekly, and monthly maintenance checklists accurately and consistently., • Process & Scheduling: Maintain maintenance schedules for all equipment., • Troubleshooting & Repairs: Diagnose and repair mechanical, electrical, hydraulic, pneumatic, plumbing, and water system issues., • Safety Optimization: Uphold a clean, safe work environment by enforcing Spark’s safety policies and procedures., • Inventory Management: Track and manage inventory of parts, tools, and key equipment components., • Vendor Coordination: Collaborate with third-party vendors to procure equipment, schedule service, and manage relationships., • Installation Support: Assist with equipment delivery and setup during new store openings or remodels, working closely with the Real Estate, Construction, and Operations teams., • Reporting: Document and report on all equipment downtime, repair activity, and facility-related concerns. Required Skills, Education & Experience: • High school diploma or GED preferred, • Proven experience in troubleshooting and maintaining:, • Electrical Systems: VFDs, relays, sensors, switches, three-phase motors, etc., • Pneumatics & Hydraulics: solenoids, regulators, valves, compressors, pumps., • Mechanical Components: conveyors, bearings, gearboxes, welding, etc., • Water Systems: reclaim, RO systems, boilers, softeners, • Preventative maintenance experience across multiple system types, • Strong organizational and problem-solving skills, • Ability to work independently and adapt to changing priorities, • Expected to be accessible by phone during operating hours and on call as scheduled, • Availability to respond to time-sensitive repair needs including nights and weekends, • Willingness to travel throughout NJ, NY, and PA with overnight travel 25% of the time, • Valid driver’s license and ability to meet the company's Motor Vehicle Record (MVR) requirements for operating company vehicles, • Basic computer proficiency, • Excellent communication and teamwork skills, • Must be able to lift up to 50lbs and perform physical tasks as required, • Bending, squatting, kneeling, and climbing stairs or ladders, • Competitive base salary plus bonus compensation package, • Excellent comprehensive health coverage, including medical, dental, and vision, as well as ancillary benefits, • 401K with contribution match, • 3 weeks paid vacation, • Company fleet vehicle provided (can be used to commute to and from assigned home location), • Company laptop, • Branded company gear and free car washes

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: Automatic Door Service Technician Experienced technician for service of automatic doors. AAADM certified preferred. Ability to perform repairs/replacements of ADA operators, manual and swing doors, door closers, pivot assemblies, panic hardware, hollow metal, storefront and automatic folding, swing, sliding doors. Tradesperson must have knowledge and / or experience with the following skills: PROFICIENT KNOWLEDGE: • Service of a variety of doors, equipment, and control devices, • 2+ years’ experience as an automatic door installer or service technician, • AAADM certification a plus, • Carpentry-partition framing metal/wood studs, installation of doors/windows, • Experience in commercial doors, automatic doors, door hardware, storefront doors, door closers, emergency exit devices and preventative maintenance, • Strong mechanical aptitude, • Clean driving record is a must for operating company vehicles, • Must have a positive & professional attitude, • Ability to manage multiple projects and work well under time and other constraints, • Ability to work in a team environment as well as independently, • Strong attention to detail and processes, • Strong service orientation to customers, • Ability to be successful in a highly fast-paced environment, • experience working with the following door manufacturers is a plus:, • Horton, • Stanley, • Record USA, • Besam, • Perform repairs and replacements of ADA operators, manual and swing doors, door closers, pivot assemblies, panic hardware, hollow metal, storefront, and automatic folding, swing, and sliding doors., • Service a variety of doors, equipment, and control devices., • Utilize carpentry skills for partition framing with metal/wood studs and the installation of doors and windows., • Conduct preventative maintenance and handle commercial doors, automatic doors, door hardware, storefront doors, door closers, and emergency exit devices., • Manage multiple projects and work well under time and other constraints., • Maintain a positive and professional attitude while working in a team environment as well as independently., • Ensure strong attention to detail and adherence to processes., • Provide excellent service orientation to customers. REQUIRED SKILLS: • Proficient Knowledge: Service of a variety of doors, equipment, and control devices., • Experience: Minimum of 2 years' experience as an automatic door installer or service technician., • Certification: AAADM certification is a plus., • Carpentry Skills: Partition framing with metal/wood studs and installation of doors/windows., • Commercial Door Experience: Experience in commercial doors, automatic doors, door hardware, storefront doors, door closers, emergency exit devices, and preventative maintenance., • Mechanical Aptitude: Strong mechanical aptitude., • Driving Record: Clean driving record is a must for operating company vehicles., • Attitude: Must have a positive and professional attitude., • Project Management: Ability to manage multiple projects and work well under time and other constraints., • Teamwork: Ability to work in a team environment as well as independently., • Attention to Detail: Strong attention to detail and adherence to processes., • Customer Service: Strong service orientation to customers., • Adaptability: Ability to be successful in a highly fast-paced environment. BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations, • 401(k) retirement plan with generous company match Powered by JazzHR RZ63yvAgAM

Job Description Role • Honest Field Technicians would be responsible for constructing and building out our network in residential apartment complexes and office buildings in NYC, Northern NJ & Stamford, CT, • Technicians (a) run fiber and ethernet through building risers; (b) mount and install networking equipment in MDF/IDF closets, and (c) set up and align radios on rooftops, • This is a fast-paced environment where you are likely working with 1 other person, setting up 2-3 buildings per month. Personal attributes • Comfortable working in a fast-paced environment, • Experience working with hand/power tools, • Excited to learn: we are looking for technicians who have strong technical competency but are always interested in continuously learning Honest Networks believes high-quality and affordable internet service is a great enabler for our communities, providing the fundamental infrastructure to learn, create and enjoy. We are a fast-growing, venture-backed, internet provider headquartered in downtown Manhattan. We are focused on providing the gigabit internet service at affordable, transparent prices, with exceptional customer service. We do this by employing employees with high integrity, a strong work ethic and a passion for learning. If working in a fast-paced, results-oriented and mission-driven environment excites you, we encourage you to apply and join our team. Learn more at . Requirements • 1-3 year experience with fiber optic, ethernet cable or electrician/conduit work, • Technical skills, • Ability to run fiber and cat5e/6 cabling through a large multi-tenant building (office, apartment complex); ability to install, terminate, and test and troubleshooting network cabling, including through existing interior and exterior conduit, • Ability to power and test networking switches and other networking hardware, • Bonus: ability to terminate fiber, • Comfortable using mass transit operate during the day, • Comfortable working in high-rises and on rooftops, • Ability to read, understand and follow work orders & change orders, • Capable of lifting up to 50 pounds, • Comfortable working in confined spaces, • Bonus, • Ability to bend pipe up to 1",, • Attractive salary (estimate of $26-35+/hr) based on capabilities and background, • Performance bonus potential, • Stock options, • Paid-time off (PTO), • Medical and dental benefits, • Metro card reimbursement

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC SERVICE TECHNICIAN Job Responsibilities & Requirements HVAC Service Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations bAN27JGvge

Job DescriptionDescription: Job Responsibilities • Lead and install sheet metal ductwork systems for HVAC projects, ensuring quality and compliance with plans and specifications., • Read and interpret blueprints, layouts, and SMACNA standards for proper duct installation., • Collaborate with technicians, installers, project managers, and contractors to meet project goals., • Support both new construction and retrofit projects., • Work independently while maintaining communication with the superintendent, builder, and management., • Identify and resolve potential issues proactively to keep projects on schedule., • Help coordinate project scheduling and assign appropriate technician and installer support., • Proven experience in sheet metal installation for HVAC systems., • Strong understanding of ductwork systems and layout., • Ability to manage multiple priorities with strong attention to detail., • Demonstrated problem-solving and decision-making skills., • Reliable, proactive, and able to work independently or as part of a team., • Excellent attendance and communication skills., • Knowledge of IECC energy codes and practices., • Familiarity with SMACNA standards and industry best practices. Requirements: Eligibility Requirements • Employment/education will be verified., • Applicants must be currently authorized to work in the United States on a full-time basis., • Encon is a drug free workplace and requires post-offer pre-employment drug testing., • Must have reliable transportation., • This position requires a valid driver’s license., • Eligible to work weekends and nights as needed. Physical Requirements • Able to work in a variety of extreme weather, hot and cold conditions., • Able to work safely in confined spaces such as attics, basements, closets, and crawl spaces., • Able to work safely at elevated heights such as rooftops, ceilings, and ladders., • Able to bend, crawl, stoop, stretch, and reach., • Able to walk on uneven surfaces., • Able to work off a ladder, sometimes at heights., • Able to safely lift 50 pounds. Encon Heating & AC complies with applicable Federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, or sex. Encon Heating & AC does not exclude people or treat them differently because of race, color, national origin, age, disability, or sex. CT LIC # HTG-0386317-S1 Putnam NY LIC# 31097 Westchester NY LIC # WC-33774-H21 MEC # 1093 AA/EOE

A company is looking for a Land Development Engineering Technician to join their Civil team. Key Responsibilities Utilize AutoCAD Civil 3D for the analysis and design of various infrastructure systems Prepare construction plans, specifications, and reports for public and private projects Develop

Job Description Firm looking for qualified MBE/WBE/SDVOB subconsultants to join our team in providing eligible candidates for work in the Port District. Concrete field/asphalt plant inspector Experience/Certification Level required: • ACI Concrete Field Testing Technician – Grade I, • NJSAT Asphalt Plant Level 1 & 2, • Radiation Safety-Nuclear Density Gauge Certified, • Efficient in the Marshall Method – ASTM C6926 - Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus, • Perform AASHTO Resource Annual Accreditation equipment calibrations., • Efficient in preparing samples for ASTM C4867 - Standard Test Method for Effect of Moisture on Asphalt Mixtures, • Able to cut asphalt cores and prepare for bulk specific gravity of in place densities in accordance with ASTM D2726 - Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive, • OSHA 10, • OSHA 30 Concrete field inspector/lab technician Experience/Certification Level required: • ACI Concrete Strength Testing Technician, • ACI Concrete Field Testing Technician – Grade I, • ACI Aggregate Base Testing Technician, • NJSAT HMA Construction Technologist, • Knowledge of AASHTO Resource Annual Accreditation for equipment calibration., • AASHTO Resource CCRL- Rebar measurements., • Knowledge of Portland cement testing, • Efficient in performing ASTM C1202 - Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration., • Efficient in performing ASTM C215 - Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens, • Efficient in performing ASTM C666 - Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, • Efficient in performing ASTM C157 - Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, • OSHA 10, • OSHA 30

Job Description Our Pest Control Technicians work closely with residents and supervisors at multi-family housing to tackle pest problems and put our customer's mind at ease. As a Pest Control Technician, you will identify pest problems and recommend pest control programs using your expertise and the latest in pest control technology. You will communicate procedures, sanitation and structural corrections with residents and management supervisors all while providing the highest-level quality of service. Essential duties and responsibilities: • Inspect and treat for pests, pest harborage, and pest entries., • Follow all safety procedures and instructions throughout every step of the process., • Travel to residences and apartment complexes and inspect for pests., • Build and maintain customer relationships., • Maintain your vehicle and all equipment at a high standard of cleanliness and maintenance., • Complete all paperwork and route logs accurately and timely., • Respond to customer and client requests in a timely manner., • Maintain high service standards at all times., • Take personal initiative and responsibility for correcting pest problems., • Suggest and sell services that meet customer needs., • Participate in group meetings and account reviews., • Complete ongoing independent and group training., • You have previous outdoor working experience including maintenance, construction or other physical work experience., • You have 6 years of driving experience with a clean driving record., • You can pass a pre-employment screenings and checks., • You can satisfactorily complete initial technical training and State Certification and Licensing requirements., • You will participate in regular in-house workshops to improve your skills and learn new methods and techniques., • You are comfortable working with insects and various animals in a variety of environmental conditions and confined spaces., • You can perform the physical requirements of this role including standing, walking, climbing, lifting, bending, reaching, crawling, squatting and moving around., • You work well independently and as part of a team., • You communicate effectively, both orally and in writing., • You have a team mentality with the ability to work independently., • You are reliable and punctual for all work assignments., • Education and /or experience:, • High School diploma or General Education Degree.

Job DescriptionDescription: KS Engineers (KSE) is a mid-size engineering and surveying firm ranked among the leaders in design services. With seven offices across New York, New Jersey, Pennsylvania, and Connecticut, we have been delivering transportation and public infrastructure design and survey services for more than 35 years. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Survey/CAD Technician Reporting to – Department Manager Duties and Responsibilities: • Assist with survey-related projects using CAD tools, • Work independently and collaboratively within project teams, • High school diploma: some college coursework preferred, • CAD certification, • Previous experience as a Survey/CAD technician, • Strong attention to detail and time management skills, • Excellent communication skills Physical requirements: • Ability to work in both office and field environments, • Prolonged standing and walking during field operations, • Frequent walking on uneven terrain, slopes, and construction sites, • Regular bending, kneeling, crouching, squatting, and reaching, • Ability to lift, carry, and transport survey equipment weighing up to 50 pounds, • Ability to set up, move, and dismantle survey instruments and tripods Pay transparency: • Base salary – $70,000 - $72,800 annually (negotiable based on qualifications and experiences), • Full-time benefits include medical, dental and vision insurance, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate on the basis of race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description Job Title: Diesel Mechanic Job Description We are seeking a Diesel Technician to troubleshoot, diagnose, adjust, and repair equipment and vehicles. This includes working on electrical systems, brakes, hydraulics, cooling, power steering, engines, and other standard components. The role involves performing preventative and corrective maintenance independently, adhering to manufacturer and customer requirements. Responsibilities • Ensure the workplace follows 5S principles by maintaining a clean, organized, and efficient environment., • Independently carry out maintenance servicing on Ground Support Equipment (GSE) and/or Commercial Trucks following OEM specifications and company standards., • Transport GSE and/or Commercial Trucks safely and securely., • Diagnose and repair mechanical issues, including basic electrical repairs, on a range of GSE and/or Commercial Trucks., • Utilize manuals to look up necessary repair information., • Conduct thorough inspections, including checking vehicle hours, fluid levels, lights, and overall condition, to ensure safety and operational compliance., • Report and discuss any damage or work outside the prescribed scope with a supervisor., • Perform refurbishing tasks, including fabrication, body work, painting, welding, and upholstery., • Prioritize tasks effectively to maintain productivity and meet customer requirements., • Experience in preventive maintenance, hydraulics, diesel engines, and electrical systems., • Ability to diagnose and repair diesel and truck engines., • Strong knowledge of electrical, mechanical, and hydraulic systems., • Valid Driver’s License required; CDL preferred but not required., • Must provide personal hand tools; specialized tools and diagnostic equipment are supplied., • A growth-oriented mindset with a collaborative team spirit. Join a leading provider of integrated solutions for GSE in aviation, part of a solid and growing international group. Enjoy a company culture with short decision lines where employees are central to success. Benefit from an environment where you can develop and grow, competitive salary, and a comprehensive benefits package including health, vision, and dental insurance, disability insurance, life insurance, a 401k plan, PTO, paid sickness leave, and the provision of all PPE. Work Environment Work tasks are assigned via tablets, involving a range of maintenance activities from preventative maintenance (PMs) to light repairs mainly at IAD. The team consists of 20 mechanics and 1 manager. First and second shift available. The fleet primarily consists of diesel trucks, with a few gas engine trucks. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $62400.00 - $74880.00/yr. Health, Dental, Vision, STD/LTD, and Life Insurance, Employee Assistance Program (EAP) Vacation and Sick Leave, plus a 401K with matching contributions Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on Dec 29, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Road Inspector - NICET Level III or IV or equivalent Reports to: Project Manager/Resident Engineer General Qualities: • Proactive self-starter., • Provides the necessary technical support to the Project Manager/Resident Engineer. Technical Responsibilities: • Possesses strong technical skills; strong computer skills; strong mathematical skills including algebra, geometry, and trigonometry; excellent verbal, written, and interpersonal communication skills., • Inspects the work performed by the contractor related to the construction of the various components of a construction project for conformity with the contract plans and specifications., • Performs mathematical calculations for determining dimensions of construction items and computing daily progress quantities., • Prepares clear, accurate and detailed daily reports properly documenting the contractor's activities in accordance with the contract plans and specifications and the Owner's guidelines and standards., • Verifies that the materials to be incorporated into the project conform to the type, brand, and grade specified in the contract plans and specifications., • Collects samples for laboratory analysis and perform tests as necessary to determine the quality and quantity of materials incorporated into the project., • Collects information related to trainees, wage rates and minority goals for verification of EEO and compliance provisions of the specifications., • Prepares as-built calculations and measurements to properly document project quantities., • Is proficient in software required to complete assigned projects., • Responsive to Client and other KSE Department needs. Administrative Responsibilities: • Familiar with all company policies and procedures and verifies implementation and compliance., • Completes time sheet on a daily basis. Requirements: Educational Requirements: • High School Diploma Experience: • 10 years of Road construction projects (Construction Cost > $10M)., • 2 years on NJDOT projects preferred. Professional Licenses/Registrations: • NICET Certification in Roadway Construction Level 1 through 4 ACI Field Technician., • NJSAT Certification, • OHSA 10, 30 or 40-hour Safety Certification, • TCP (Rutgers CAIT) Professional Development: • Actively participates in professional development and training and licensing. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate on the basis of race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job DescriptionSalary: $83,200-$99,840 annual base salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development". How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector with a NICET II certification to join our growing Transportation & Infrastructure Division. In this role, you will be responsible for overseeing and inspecting bridge construction and/or bridge substructure repair near Newark, NJ, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role may also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors schedule, to include night work, weekends, and holidays. Appointment to this position is subject to client review and approval. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll get to do: • Conduct regular on-site inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary, and daily records of the numbers and classifications of workers employed by contractors., • Maintain daily records covering running totals of quantities and costs while construction is in progress., • Prepare and forward weekly quantity summaries for items associated with the contract., • Assist in the development and implementation of quality control procedures., • Review traffic protection procedures., • Attend meetings and conferences as needed. Who you are: • Required, • Certified by NICET as a Transportation Engineering Technician (NICET Level II), • Note: NICET Level III will also be considered for this role. Compensation is negotiable., • 5+ years of experience in construction inspection, with a focus on transportation infrastructure projects., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid drivers license and willingness to travel to various project sites within New Jersey and NYC Metro Area., • Preferred, • Bachelor's degree in Civil Engineering, Construction Management, or a related field., • NJSAT, NACE, ACI Grade-I and TCC/TCP Certifications What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate in mcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Companypaid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR

Job DescriptionSalary: $83,200-$99,840 annual base salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development". How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector with a NICET II certification to join our growing Transportation & Infrastructure Division. In this role, you will be responsible for overseeing and inspecting bridge construction and/or bridge substructure repair near Newark, NJ, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role may also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors schedule, to include night work, weekends, and holidays. Appointment to this position is subject to client review and approval. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll get to do: • Conduct regular on-site inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary, and daily records of the numbers and classifications of workers employed by contractors., • Maintain daily records covering running totals of quantities and costs while construction is in progress., • Prepare and forward weekly quantity summaries for items associated with the contract., • Assist in the development and implementation of quality control procedures., • Review traffic protection procedures., • Attend meetings and conferences as needed. Who you are: • Required, • Certified by NICET as a Transportation Engineering Technician (NICET Level II), • Note: NICET Level III will also be considered for this role. Compensation is negotiable., • 5+ years of experience in construction inspection, with a focus on transportation infrastructure projects., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid drivers license and willingness to travel to various project sites within New Jersey and NYC Metro Area., • Preferred, • Bachelor's degree in Civil Engineering, Construction Management, or a related field., • NJSAT, NACE, ACI Grade-I and TCC/TCP Certifications What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate in mcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Companypaid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR Company DescriptionCompany Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. Our core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.Company Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. \r\n\r\nOur core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.

Job DescriptionDescription: Job Title: Machine Maintenance Technician Our manufacturing company is seeking a skilled Machine Maintenance Technician to join our team. The ideal candidate will have experience in machine maintenance and repair in a manufacturing setting, though experience in the following mechanical trades will also be considered: heavy or industrial machine mechanic (forklift, construction machinery, truck mechanic, boat mechanic). Responsibilities: • Perform routine maintenance on various machines and equipment to ensure safe and efficient operation., • Diagnose and repair mechanical, electrical, and hydraulic/pneumatic issues., • Use diagnostic tools such as multimeters., • Read and interpret electrical schematics to troubleshoot and repair electrical issues., • Rebuild and repair hydraulic and pneumatic systems as needed., • Use basic welding skills to repair and fabricate machine parts., • Apply basic mechanical engineering knowledge to improve machine performance and efficiency., • Medical, Dental, Vision, • Vacation and sick time, • Company-provided life insurance, • Supplemental benefits: Short- and Long-term Disability, • Education Assistance, • 401k match of up to 4% Minimum of 2 years of experience in machine maintenance and repair. • Ability to read and interpret electrical schematics., • Ability to diagnose electrical problems using a multimeter., • Knowledge of pneumatics/hydraulics and the ability to rebuild and repair them., • Basic welding knowledge., • Strong problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • Proficiency in English (verbal and written) for effective communication and following precise instructions., • Must have a current and valid driver's license., • Ability to lift heavy objects and perform physical tasks as required. Pre-employment screening: A legally compliant background check, motor vehicle record check, and pre-employment drug screening are required. Employment Eligibility All applicants must complete the I-9 Employment Eligibility Verification form upon hire and provide acceptable documents to verify their identity and work authorization as required by federal law. Equal Opportunity Employer We are an equal opportunity employer and comply with all applicable laws regarding discrimination and hiring practices. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by law.

Job Description We're looking for a dependable and motivated Instrument Operator to join our growing team. If you enjoy working outdoors, learning on the job, and being part of meaningful infrastructure and land development projects, this is a great opportunity to build your skills in a supportive and professional environment. What You'll Do: • Work closely with the Crew Chief to complete boundary, topographic, ALTA, and construction stakeout surveys., • Operate total stations, GPS equipment, and data collectors with accuracy and care., • Maintain and calibrate survey instruments., • 1+ year of experience in land surveying, • Familiarity with total stations, GPS units, and digital data collection tools., • Strong work ethic, attention to detail, and willingness to work outdoors in varying conditions., • Ability to take direction and work well in a team setting., • Experience with Trimble, Leica, or Topcon equipment., • Prior construction or civil infrastructure experience., • Competitive pay and benefits., • Real opportunities for advancement—many of our senior staff started in the field., • A stable and respected firm with a diverse portfolio of projects., • Supportive work culture with a focus on learning and growth.

Job Description URGENTLY HIRING Electro Mechanical Maintenance Technician (All Shifts Available!) Send your resume to jpiacquadio @ aerotek.com for the fastest response! Pay: $36 - $39 per hour Shifts: 1st, 2nd, and 3rd (apply for shift times) Location: New Brunswick, NJ Responsibilities • Troubleshoot and repair processing and packaging equipment., • Perform routine preventive maintenance and maintain proper documentation., • Read and interpret electrical schematics and wiring diagrams., • Troubleshoot and repair control panels, motors, and power distribution systems., • Work with conveyors, gearboxes, pumps, and automated packaging equipment., • Perform mechanical alignments, bearing replacements, and belt tensioning., • Calibrate temperature sensors, flow meters, and pressure gauges., • Use multimeters, oscilloscopes, and other diagnostic tools., • Follow SOPs and maintain clean, safe workspaces., • Experience in industrial maintenance or electro-mechanics., • Strong knowledge of PLCs, VFDs, and industrial controls., • Ability to troubleshoot and work independently under pressure., • Familiarity with CMMS systems and Microsoft Office., • Electrical systems knowledge and ability to read electrical schematics., • Associate’s degree or technical certification in electromechanical technology, electrical engineering, or industrial maintenance., • High school diploma with extensive hands-on experience is acceptable for some roles., • Experience in a manufacturing or food production environment., • Prior work with automated or robotic systems is a plus. Join a fast-paced, team-oriented environment with a global impact. We offer a competitive hourly rate with a sign-on bonus, along with comprehensive benefits including medical, dental, vision, life insurance, 401(k), FSA, and STD/LTD. Enjoy paid time off and career development opportunities. Job Type & Location This is a Contract to Hire position based out of Westfield, NJ. Pay and Benefits The pay range for this position is $36.00 - $39.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Westfield,NJ. Application Deadline This position is anticipated to close on Dec 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Performs water damage repair to include water extraction, pack-out of contents, removing/disposing of non-salvageable materials, light construction and demolition as directed by supervisor. WTR Water Damage Restoration Technician. ASD Applied Structural Drying Technician.

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Resident Engineer_Asst RE- NICET Level IV or Equivalent Reports to: Project Manager General Qualities: • Capable of leading, training, inspiring, and motivating the staff., • Proactive self-starter capable of setting a positive example for the staff., • Provides technical and management support to the Department Manager/Regional Manager/Project Manager., • Has full technical and administrative responsibility for interpreting, organizing, executing, and coordinating projects/assignments., • Manages a major complex project and/or several routines/fewer complex projects. Technical Responsibilities: • Responsible for the supervision of the construction inspection phase of various types of construction projects., • Serves as the Owner's direct on-site representative to the contractor., • Duties include direct supervision of a project's construction engineering/inspection staff, performing quality assurance and oversight of the work in progress and ensuring that the project is constructed in general conformance with the contract plans and specifications., • Possesses strong supervisory and technical skills; effective time-management skills; strong computer skills; strong mathematical skills including algebra, geometry, and trigonometry; excellent verbal, written, and interpersonal communication skills; able to mentor staff in functional areas of technical construction inspection activities., • Assigns, instructs, and directs project staff in their work of inspection of the materials and work procedures involved., • Possesses an understanding of the equipment, materials and methods utilized by contractors and confirms that these methods conform to the applicable contract plans and specifications., • Analyzes and interprets project plans and specifications., • Prepares and maintains all required reports and verifies that the assigned project has been fully documented., • Is responsible for the development of contractor change orders, as-built quantities, and contractor's monthly payment estimates., • Receives and investigates complaints and inquiries from property owners, citizens, and public officials., • Represents the owner in dealings with the contractor and public agencies on the local, county, and state levels., • Directs the activities of sub-consultants and other KSE Departments., • Is proficient in software required to complete assigned projects., • Responsive to Client and other KSE Managers/needs. Administrative Responsibilities: • Identifies out-of-scope work., • Monitors invoice ability of self and assigned staff to verify compliance with established goals., • Familiar with all company policies and procedures and verifies implementation and compliance., • Completes time sheet on a daily basis., • Verifies that assigned staff has been provided correct time charge information., • ACI Field Technician, • ACI CCTC Certification, • NJSAT Certification, • TCP (Rutgers CAIT), • OHSA 10-, 30- or 40-hour Safety Certification Experience: • 10 years of Road and Bridge construction projects (Construction Cost > $10M)., • 3 years on NJDOT projects preferred. Professional Development: • Actively participates in professional societies, industry organizations, and local civic organizations., • Encourages the staff to participate in professional societies, industry organizations, and local civic organizations., • Encourages professional development and training and licensing (self and staff) KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.