Construction technician jobs in Scottsdale, AZCreate job alerts

Job Description Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. This Opportunity: We have immediate full-time career opportunities for a Level II NDT/ CWI Technician in several of our offices. Certerra offers on-going training and the ability to gain valuable career experience and technical certifications. Job Duties • Test and inspect using NDT and or CWI procedures on construction job sites., • Prepare daily reports on observation and testing activities, • Review reports and test data for accuracy and completeness Job Requirements: Candidate must have a minimum qualification of Level II certifications: CWI Gamma Radiography Testing (RT) Magnetic Particle Testing (MT) Candidate must meet the following minimum requirements: Work related experience in utility and/or industrial construction Current State card or ASNT-IRRSP Documented education and on-the-job training Good communication and report writing skills Clean motor vehicle record Pass a pre-employment drug screen Complete a FBI fingerprint criminal background check or TWIC card Additional preference given for candidates with the following certifications: Certified Welding Inspector (AWS) Ultrasonic (SWUT / PAUT) Liquid Penetrant (PT) Physical Demands • Physical examination required to obtain medical clearance to work, • Ability to stoop, kneel and to routinely lift and carry 50 pounds, • Clean driving record and capable of being insured for driving company vehicles, • Able to work in variable outside conditions, including extreme heat or cold if need We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description We are seeking a highly skilled and experienced Senior Construction Materials Testing Technician to join our team. In this role, you will independently perform advanced-level testing and inspection of construction materials, ensuring compliance with project specifications and industry standards. You will serve as a technical expert in the field, occasionally receiving guidance from a supervisor, and may oversee and mentor junior staff. This position offers the potential to grow into an Associate Project Manager role, providing a clear path for career advancement. Responsibilities include traveling to various job sites, working in diverse terrain and weather conditions, and contributing to the success of complex construction projects. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Using your talents to positively affect communities. You bring to the team: • Strong communication skills., • Ability to contribute and work well on a team., • Associate degree from a technical or four-year school preferred., • 8+ years' experience in construction observation, inspection, and testing., • ACI Grade 1 required., • ACI Strength, ATTI Level 1, and/or Nuclear Gauge certifications preferred., • Laboratory Certification (ACI/ATTI) is a plus., • Valid driver's license with a good driving history. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Become an owner in the company after your first year through our Employee Stock Ownership Plan (ESOP), • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description Founded in 1984, Firetrol is the National leader in Fire Protection & Life Safety services. We are currently seeking skilled Fire Alarm Technician to join our team of over 900 of the best fire protection professionals in the industry. This opening is for the Phoenix, Arizona office. Firetrol has an immediate opportunity for a well-qualified Fire Alarm Technician to join our Phoenix team. This position is for experienced New Construction Technicians versed in the day to day operations of installation, programming, commissioning and turnover for new Fire Alarm Systems. This position will also include Tenant Improvement and Retro-fit Fire Alarm construction. Requirements • Must have verifiable work experience in the installation, programming and commissioning of Fire Alarm Systems. Preference will be given to candidates with EST (Edwards Systems Technology) Certifications. However, equivalent manufacturer certifications are acceptable., • Must be able to pass an employment, and regular random drug tests. Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job Description Exciting opportunity to join BPG Designs, LLC as a Full Time CAD Technician! As a key player in our team, you will have the chance to showcase your skills and creativity in a hybrid work setting. With a competitive pay, your talent will be recognized and rewarded accordingly. Take your CAD expertise to the next level with us and be part of a dynamic company at the forefront of the construction industry. Are you ready to make your mark in the world of design and engineering? Apply today! You will have benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, and Paid Time Off. Are you excited about this CAD Technician job? As a CAD Technician at BPG, you can expect to work on a variety of exciting projects daily. Your tasks may include creating detailed drawings, collaborating with engineers and architects, and ensuring accuracy and precision in your designs. In this role, you will have the opportunity to utilize your software proficiency and problem-solving skills to contribute to the success of our projects. Your typical schedule will be Monday through Friday, from 7am to 4pm (Arizona Time), allowing you to maintain a healthy work-life balance while honing your CAD expertise in a supportive and collaborative hybrid work environment. Technical Skills Required • Proficient in AutoCAD (Map 3D preferred) for telecom or utility design, • Ability to read and interpret base maps, plats, utility records, and field sketches, • Familiarity with OSP/ISP standards (BSW, UG, aerial, conduit systems), • Experience drafting Plan & Profile views, As-Builts, and Fiber Routing, • Capable of using standard templates and layer conventions for telecom builds, • Draft buried and aerial fiber route designs from field notes, KMZ, or survey data, • Accurately place utilities, ROW, easements, property lines, and tie points, • Offset civil features (curbs, gutters, sidewalks, fences) as needed, • Label and annotate drawings per company and client standards, • Apply jurisdictional permitting requirements and standard engineering details, • Demonstrated experience with fiber design projects between 700–2000 feet in length, • Proven ability to take a project from concept to 100% completion with minimal oversight, • Performs quality control, redline correction, and self-checks effectively, • Communicates clearly with field teams, engineers, and project managers, • Organized, reliable, and adaptable in a fast-paced environment, • Strong attention to detail and ability to meet deadlines Job Posted by ApplicantPro

Who We Are Invitation Homes is a team of more than 1,400 associates who come from all walks of life. We call different communities “home," but our shared values bind us together. Invitation Homes is a place where possibility lives. The market teams include our Leasing, Property Management and Rehab, Turns & Maintenance professionals. Together, our dedicated associates work hard to build excellent resident experiences while maintaining high-quality homes and ensuring potential residents are presented with a rental property they can’t refuse. Your Role on the Team As a Maintenance Technician at Invitation Homes, you will be performing high-quality maintenance work in our single-family rental homes while providing outstanding customer service to our residents. This includes but is not limited to the following tasks: * Completing maintenance service requests across multiple trades * Providing excellent customer service and promoting a quality living experience for all residents * Completing regular ProCare visits in residents’ homes to perform proactive maintenance and repairs * Educating residents regarding all maintenance topics * Completing general property condition assessments at all property visits and alerting the property management team when items require immediate attention * Reviewing and using Technician-specific reports to find opportunities for improvement * Performing repairs in vacant properties while they are on-the-market or during the turn process * Properly using and caring for company-supplied tools, materials, and vehicles * Performing other duties as assigned Your Experience Includes * High School diploma or equivalent * OSHA 10 is required (new hires will have up to 90 days to complete OSHA 10 certification if not already certified). * Proven experience in residential repairs and maintenance, other building maintenance or related experience. * Understanding of residential construction and mechanical systems and ability to perform general repairs in some of the following: plumbing, electrical, carpentry, sheetrock, exterior structural, HVAC (minor) and appliances. Some training will be provided. * Excellent customer service and interpersonal skills as well as strong verbal and written communication skills; multi-lingual a plus * Comfortability using mobile devices (i.e. iPad and/or iPhone) and various mobile applications * Must possess a current driver's license, automobile insurance, and any other licenses and/or certification as required by state law * The following certifications are preferred but not required: * EPA Certification, Type I and II * HVAC Certification * CPO certification (pool) * Ability to be at work on a regular and consistent basis including weekends and holidays as needed * Ability to provide basic hand and power tools * Ability to perform work that requires the following: * Frequent climbing, reaching, use of fingers, stooping, kneeling, crawling, pushing, pulling, lifting, talking, and hearing * Ability to lift and/or move an excess of 50 pounds or more and operate standard maintenance equipment as assigned * May be required to conduct occupancy checks and attend eviction lockouts/setouts in coordination with local law enforcement Why Us We stand for flexibility, opportunity, and a home that people can make their own. It’s as true for our associates as it is for our residents. Just like we help our residents live freer, we liberate our associates’ careers, too. Our associates know that goals matter, potential is unlocked, and careers thrive. Invitation Homes isn’t just a workplace but a possibility place. We offer each new associate: * Competitive pay and an annual bonus program for all associates * Generous paid time off plans including vacation accrual, sick time, volunteer time, and standard and floating holidays * 401k with matching company contributions * Awesome work environment with casual dress * Team events and gatherings * Employee resource groups: Together with Women, Asian Alliance, Black Collective, Juntos, Gen Next, and Open Invitation. Build a foundation here and apply today! The salary range for this position is: $19.11 - $33.13, plus individuals may be eligible for an annual discretionary bonus. Actual compensation within the range will be dependent upon the individual's skills, experience, qualifications, location, and applicable employment laws. To attract and retain top talent, we're pleased to offer competitive compensation and benefits, including: * Annual bonus program * Health, dental, vision, and life insurance * Long-term and short-term disability insurance * Generous paid time off plans include vacation accrual, sick time, standard holidays and floating holidays * 401(k) with company matching contributions * Awesome work environment with casual dress * Team events and gatherings (Pre- and Post-Covid) Invitation Homes is an equal opportunity employer committed to fostering a diverse, inclusive and innovative environment with the best associates. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, Veteran status or any other factor protected by applicable federal, state or local law. If you have a disability or special need that requires accommodation, please contact us at ___. To all recruitment agencies: Invitation Homes does not accept agency resumes. Please do not forward resumes to Invitation Homes employees. Invitation Homes is not responsible for any fees related to unsolicited resumes. #LI-CN2

Job Description The Service Manager is responsible for the delivery of service and sales of their assigned region. The role manages Service Technicians, sub-contractors, vendors, and customers. The position oversees all incoming repair requests and preventative maintenance jobs that the customer assigns. The role is responsible for scheduling, estimating, Service Technician management/training, and customer development. The Service Manager develops and maintains a relationship with the customer and ensures the quality of work and adherence to customer-specific Key Performance Indicators (“KPI”’s) are met. Cirks Construction Inc. (CCI), dba KDC Construction is a leader in the construction industry with diverse individuals dedicated to our people, customers, projects, and community. We are maintaining a strong focus on building a culture that encourages our employees to grow personally and professionally. KDC is also a proud recipient of the Top Workplaces 2022, 2023, and 2024, presented by the Orange County Register. Apply if you: * Bring a cooperative spirit to your team and neighboring department. * Have an understanding that through your contributions, you aid in the overall Company’s success. * Pursue continuous efforts to see beyond current business modes and methods. * Embody an understanding that as a committed team member, tenure with an organization is achievable. * Bring your whole self to work. Applying your knowledge, skills, and abilities ensures that every task you perform is performed at the highest level. Striving to be the leader in construction and facilities services by exceeding customer expectations begins with each employee. Through the individual contributions of our employees, we can support our core values. To help us accomplish this goal, we ask you to SMILE. Synergy – bring a cooperative spirit to your team and neighboring departments. Marketing – understanding that through your contributions, you aid in the overall success of our Company. Innovation – continuous efforts to see beyond current business modes and methods. Longevity – understanding that tenure with the organization is achievable as a committed team member. Excellence – bring your whole self to work. Applying your knowledge, skills, and abilities ensures that every task you perform is performed at the highest level. Essential Job Functions • Oversee both field and office operations to ensure smooth and effective service delivery., • Manage employee performance, control labor and material costs, and ensure service levels meet or exceed customer expectations., • Responsible for managing a designated budget to meet financial expectations., • Ensures timely follow-up and resolution to work exceptions., • Ensures and validates the quality of work provided., • Ensures timely proposal submittals to customers., • Prepares estimates including time and materials to complete large scopes of work requiring return trips., • Conduct employee performance reviews, provide coaching, and foster professional development., • Ensures proper safety rules, regulations, and incident reporting are followed., • High school diploma or equivalent., • Strong technical knowledge and experience in General Building, Plumbing and Electrical trades., • Positive customer focus, always considering the impact on our customer and their customers., • Ability to interact with a diverse customer roster., • Carefully considers cost/benefits., • Strong written and verbal communication skills., • Demonstrates attention to detail, creative problem-solving, and analytical skills., • Able to deal with frequent change, delays, or unexpected events and communicate accordingly., • Supports the organization’s goals and values., • Look for ways to improve and promote quality., • Follow all Company and customer policies and procedures., • Possess the vehicle and tools required to perform job functions., • Proficient with computers and familiar with Microsoft Software Suite., • Medical insurance, • Dental HMO and PPO insurance, • Vision insurance, • Life/AD&D insurance, • Flexible Spending Accounts – Unreimbursed Medical and Dependent Care, • 401(k) retirement plan, • Vacation and Sick Time

Job Description Spray Foam Insulation Technician (Lead Role) Residential & Commercial Location: Scottsdale, AZ 85250 Employment Type: Full-Time Salary: Up to $35/hr. + Join Our Team as a Lead Spray Foam Insulation Technician We are seeking a Skilled Spray Foam Technician with leadership experience to join our growing insulation team. In this role, you will lead spray foam installation projects in residential and commercial settings, manage a team of insulation technicians, and ensure safe, high-quality application of spray foam insulation. Key Responsibilities: Spray Foam Application & Equipment Operation • Install open-cell and closed-cell spray foam insulation in homes and commercial buildings., • Operate and maintain spray foam rigs and equipment with a focus on efficiency and safety., • Lead a team of insulation installers to ensure timely and accurate project completion., • Communicate with clients before, during, and after installations to ensure satisfaction., • Enforce OSHA and company safety protocols at all times., • Complete daily work logs, time sheets, and service reports. Experience: • Minimum 3 years of spray foam insulation experience (closed-cell and open-cell)., • Knowledge of spray foam systems, building science, and thermal insulation principles., • Strong communication and problem-solving skills., • Valid driver’s license and a clean driving record required., • Able to lift up to 50 lbs., • Competitive pay and benefits, • Opportunities for advancement, • Supportive team environment, • Work with high-performance building materials that make a real impact

Job Description Fisher Industries is a family of businesses that encompass all aspects of the aggregate production and heavy civil construction industries. Our unique, vertically integrated business model allows us to handle small projects, large scale operations, and every tough job in between. Our goal is to provide reliable products and sustainable solutions for innovative global infrastructure. For additional information about our company, visit our website at POSITION SCOPE The Civil Engineering Construction Materials Testing Technician will sample, and test processed aggregates, asphalt, and/or concrete for quality related characteristics. Traveling to work sites within state lines is required. Travel to surrounding states is periodically required. PRIMARY DUTIES • Perform aggregate, asphalt, and/or concrete laboratory testing using approved methods, • Gather, test and log samples of material, ensuring quality in all phases of testing, • Perform field testing at project sites under construction, • Interact professionally and positively with client representatives, business partners, and co-workers, • Adherent to all safety and protective equipment policies, demonstrating safe work practices and completing required safety training, • Maintain accurate, detailed, legible records (written and electronic) of required testing results, • Obtain and maintain current certifications as required for position, • Must be able to safely operate nuclear gauge in accordance with company procedures, • Must be able to accept guidance and direction from senior personnel, • Must maintain required qualifications to operate company vehicles, • Safety, Safety, Safety comply with all OSHA/MSHA and company policies, procedures, and standards of safety, • Perform other duties as assigned REQUIREMENTS • High school diploma or equivalent, • Geotechnical Experience, • Required ATTI Certifications, • 1 year of previous experience in aggregate, asphalt, and/or concrete related lab and field testing on road construction projects with demonstrated competence in work assignments is preferred, • Job related certifications are preferred, • Valid Driver's License is required, • Acceptable MVR in accordance with Fisher's Company Vehicle Program policy is required, • Must be a self-starter who is able to work effectively and efficiently with limited supervision, • Basic math skills, • Good communication and computer skills, • Ability to lift and move up to 65 lbs. repeatedly daily, • Ability to complete work tasks under various adverse weather conditions including heat above 100 degrees, cold, rain, and snow, • Ability to pass a pre-employment drug test, • Travel to work sites within state lines is required, • Travel to surrounding states is periodically required Fisher Industries is an Equal Opportunity Employer. We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email or call the HR Department at (701) 456-9184 to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application. Job Posted by ApplicantPro

Job Description Ardurra is seeking a Construction Observation Inspector to join our staff in Arizona! This position is open to both part-time and full-time opportunities. Primary Function In this role, the Construction Inspector will observe and inspect various construction sites. Primary Duties Construction observation and inspection duties include, but are not limited to: • Visit construction sites to monitor activities, • Observing compliance to all safety protocols, • Arranging and reviewing material testing results, • Determining and documenting quantity of work completed and materials used, • Assist in preparing pay estimates and change orders for construction contracts, • Track project budgets and contract amendments, • Participate in project meetings to plan and review project progress, • Investigating complaints, • Confer with contractors and the general public to resolve problems with inspections, • Interpret surveying documents; reading plans, maps or graphic instructions, • Communicate projects status and issues to management in a timely manner, • Ensures compliance with jurisdiction specifications and details, • Arizona Department of Transportation (ADOT) Standard Specifications for Road and Bridge Construction, • Maricopa Association of Governments (MAG) standard specifications and details for public works construction, including, but not limited to: earthwork; sanitary sewers and water lines; irrigation pipes; storm drains; streetlights; electric, telephone, and dry utility trenches; paving and concrete flatwork; and bridges and structures, etc, • May coordinate-survey requests and staking, • Monitor trenching for alignment and grade, shoring, and manhole locations and compactionCheck pipes, valves, and fire hydrants for proper location, type, and operations, • Monitor conflicts with other utilities, • Inspect the full range of public works construction projects, which includes streets, alleys, water and sewer lines, irrigation facilities, storm drains, and permit construction in the public right-of-way, for compliance with standard details, specifications, and approved plans, • Inspects materials, grades, and other work for compliance with standard and special specifications, details, plans, and standard construction practices, • Complete daily and monthly progress reports and assists in preparing monthly and final pay estimates, • Compute monthly estimates of work completed and recommends payment for contractors, • Monitor the Quality Assurance Plan and calls for testing as required, • Review progress of projects being inspected for the city by others and assists them in coordinating work, • Train other construction inspectors as needed, • Inspect traffic control barricade set-ups including street, sidewalk or alley restrictions in accordance with City of Phoenix Traffic Barricade Manual including any ADA requirements, • May coordinate with utilities, other departments, contractors, and sub-contractors, • Review quantities based on plans and specifications prior to construction, • Work with survey personnel in preparing record drawings, • Observe and ensures that materials are in accordance with and used in accordance with standard details specifications, approved plans and normal construction practices, • Records all field changes for "as-built" drawings on field plan set or assures the contractor and/or architect/engineer are recording changes, • Handle property owners complaints and inquiries as to construction activities, • Call for survey support as required by construction progress, • Maintain regular and reliable attendance, • Inspect trench backfill, sub-grade and aggregate base course for grade, compaction, moisture, and preparation for paving, • Attend and participates in preconstruction meetings with department staff, engineers, contractors, developers and other organizations, • Ability to use Microsoft Office Programs, Word, Excel, Outlook, • Represents Ardurra in the construction inspection role in a manner that demonstrates respect for others, integrity, and a high degree of professionalism, • High school diploma or GED equivalency, • 4+ years’ experience in public works construction inspection work or related field, • Valid Arizona Driver’s License with acceptable driving record, • Any equivalent combination of experience and training which provides the knowledge and abilities necessary to perform the work, • Strong work ethic, • Discipline to be on time, all the time, and meet client deliverables, • Strong verbal communication skills enabling efficient work between clients and contractors, • Written communication skills necessary to write and edit routine reports, • America Concrete Inspection (ACI) Certification Field Testing, • America Public Works Association (APWA) Certification, • American Traffic Safety Services Association (ATSSA) Certification, • Traffic Control Technician (TCT), • Traffic Control Supervisor (TCS), • Pavement Marking Technician (PMT), • Guardrail Installer (GI), • Arizona Technical Testing Institute (ATTI) Field Technician Certification, • International Code Council (ICC) Certification, • International Municipal Signal Association (IMSA) Certification, • Roadway Lighting, • Signs and Pavement Markings, • Traffic Signals, • Traffic Signal Inspector, • Work Zone Traffic Control Safety, • National Institute for Certification in Engineering Technologies (NICET) Certification, • Certification for Materials, Asphalt, Concrete, Soils and Highway Construction While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-LC

Job Description Spray Foam Insulation Technician (Lead Role) Residential & Commercial Location: Scottsdale, AZ 85250 Employment Type: Full-Time Salary: Up to $35/hr. + Join Our Team as a Lead Spray Foam Insulation Technician We are seeking a Skilled Spray Foam Technician with leadership experience to join our growing insulation team. In this role, you will lead spray foam installation projects in residential and commercial settings, manage a team of insulation technicians, and ensure safe, high-quality application of spray foam insulation. Key Responsibilities: Spray Foam Application & Equipment Operation • Install open-cell and closed-cell spray foam insulation in homes and commercial buildings., • Operate and maintain spray foam rigs and equipment with a focus on efficiency and safety., • Lead a team of insulation installers to ensure timely and accurate project completion., • Communicate with clients before, during, and after installations to ensure satisfaction., • Enforce OSHA and company safety protocols at all times., • Complete daily work logs, time sheets, and service reports. Experience: • Minimum 3 years of spray foam insulation experience (closed-cell and open-cell)., • Knowledge of spray foam systems, building science, and thermal insulation principles., • Strong communication and problem-solving skills., • Valid driver’s license and a clean driving record required., • Able to lift up to 50 lbs., • Competitive pay and benefits, • Opportunities for advancement, • Supportive team environment, • Work with high-performance building materials that make a real impactCompany DescriptionThis is a direct hire placement. Come join a great team! Always offering competitive pay PLUS SIGN ON BONUS!!This is a direct hire placement. Come join a great team! Always offering competitive pay PLUS SIGN ON BONUS!!

Job Description About Alta E&I: Alta E&I is a leading civil engineering consulting firm committed to delivering innovative and sustainable solutions for our clients. With a focus on excellence, we provide a wide range of services encompassing environmental and infrastructure. General Summary: We are seeking a highly skilled and experienced Construction Staking CAD Technician to use CAD software like AutoCAD Civil 3D and Trimble Business Center to create and manage construction layout plans, ensuring accurate placement of buildings and infrastructure based on survey data and designed documents. Primary Duties and Responsibilities: • Creating Construction Staking Point Files: This involves converting survey data into digital points that can be used for on-site layout., • Generating Construction Layout Drawings: Creating detailed plans that show the precise location of buildings, utilities, concrete structures and other infrastructure elements., • Working with Survey Data (Autocad files supplied by the client}: Processing and interpreting survey data to accurately represent the site conditions and project requirements., • Ensuring Accuracy and Quality: Checking for errors and inconsistencies in the drawings and ensuring they meet project standards., • Collaborating with Engineers and Surveyors: Working closely with other professionals to ensure that the construction layout plans are accurate and meet the project's needs., • Using CAD Software: Proficiency in CAD software like AutoCAD Civil 3D is essential for creating and managing construction layout plans., • Understanding Construction Layout Principles: Having a strong understanding of construction layout principles and techniques is crucial for creating accurate and usable plans., • Maintaining Project Documentation: Keeping accurate records of survey data, drawings, and other project-related information., • Quality Control: Monitoring staking and ensuring trades are paying attention to staking provided. Qualifications: • Proficiency in CAD Software: Strong skills in AutoCAD Civil 3D Trimble Business Center and other relevant CAD software., • Knowledge of Surveying Principles: A good understanding of surveying principles and techniques is essential., • Attention to Detail: The ability to pay close attention to detail and ensure accuracy in the drawings., • Problem-Solving Skills: The ability to identify and resolve problems that may arise during the construction layout process., • Communication Skills: The ability to communicate effectively with engineers, surveyors, and other project stakeholders., • Experience with Construction Staking: Experience with construction staking and layout is a plus., • Education: While a degree in engineering, surveying, or a related field is preferred, experience and training can also be valuable. Why Alta? Welcome to Alta E&I! Alta E&I is a leader and client full-service Engineering, Surveying, Construction Material Testing, and Environmental company. We have partnered with the most reputable and knowledgeable architects, developers, building contractors, institutions, and government agencies. Alta provides performance driven solutions throughout the asset life cycle, from concept to decommissioning. These projects have primarily been in the Phoenix and Tucson metropolitan areas but have included other locations in the State of Arizona. Alta Southwest is one of the fastest growing premier Engineering company is the state. We strive to be the best technical services company to work with, work for and invest in! Join us and gain a career through training that promotes additional certifications allowing you to become a skilled worker in the industry. Benefits: As an Alta E&I employee you will receive the opportunity to enroll in our company sponsored benefits (medical, dental, vision, life, long term disability) and 401k plan. You will also receive 7 paid company holidays and accrue up to 10 paid days off. We pay for employee earned certifications, which include immediate pay increases. Join us and get a career!

Job Description At PEARCE, we've got a career for you! Join the nation's leading independent service provider for critical telecommunication and renewable energy infrastructure. We are the premier independent service provider for our nation's critical infrastructure. With over 2,500 team members nationwide, Pearce delivers comprehensive engineering, maintenance, repair, and repowering solutions, ensuring the seamless operation of our nation's wireless and wireline telecom, commercial and utility-scale solar and wind projects, EV charging stations, as well as large-scale power generation, critical power and energy storage assets. Your Impact: Are you an experienced Tower Foreman with construction and project management skills looking for your next full-time role supporting AT&T and T-Mobile Technology and structural projects, including new builds, site mods, and rooftop installations? Do you thrive in a crew environment and can deliver high-quality projects on time with solid professionalism, within budget, all while adhering to strict safety guidelines? If so, then Pearce has a role for you! The Tower Foreman will need to be able to lead an experienced tower technician crew and train new technicians while maintaining a safe, productive job site. This position will cover the state of New Mexico, in addition to region travel, as needed. Core Responsibilities: • Operate as a Tower Foreman in the installation, maintenance, and de-installation of all aspects of wireless cell site foundations, including grounding conduits, electrical installations, site de-installation of antennas, coax, and BTS cabinets (base transceiver station), • Perform lead responsibilities and effectively interface with all levels of management, staff, and customer requirements, • Conduct performance checks and regular maintenance (including out of season equipment), repairing, and occasionally installing various cell tower types, • Complete assigned tasks within project scope accurately and efficiently, • Maintain proper installation, troubleshooting, and repair techniques, • Analyze/interpret site data and calculate figures, • Isolate basic hardware, software, and air interface malfunctions utilizing various test equipment (Sweeps, PIM, Fiber, Microwave, etc.) on multiple products and technologies Core Experience: • Previous Tower Tech III or Tower Foreman experience is highly preferred, • Proven construction (civil and RF) skills, understanding scope, schedule, cost, quality, resource, and deliverable management, • Climbing Safety & Rescue Certification (assistance may be provided for renewals), • Ability to read and understand construction drawings (CD's) and Plumbing diagrams (RFDS), • Knowledge of relevant electronic, mechanical, and electrical components, • Working knowledge of cell site service monitors, RF test equipment, Fiber, and PIM equipment, • High level of organization and scheduling abilities, • Effective interpersonal communication skills, both verbal and written At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards and possess a strong understanding of safety protocols. • Climbing structures and or operating lifts for prolonged periods., • Must be able to work at heights 90' to 500+'; maintain efficient weatherproofing, grounding, and rigging techniques, • Lifting heavy objects and stretching above your head In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$28—$32 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. At PEARCE, we are an equal opportunity employer dedicated to cultivating an inclusive environment that empowers employees to excel and make a meaningful impact, providing a dynamic space for field technicians, service specialists, and corporate professionals to flourish and propel their careers forward within our nationwide presence and expansive service offerings. Learn more about us at !

Job Description Staff Experts, LLC is a highly specialized full-service Staffing & Recruiting Firm. We specialize in staffing in the areas of Engineering, Construction Management, Manufacturing, Information Technology, Aerospace & Defense, Administrative-Accounting-Finance, Call Center Operations, Life Sciences, Healthcare and Skilled Trades/Construction, Logistics. Staff Experts is currently seeking to fill permanent Construction Materials Testing Field Inspector positions with several clients. Below is the job description for these great opportunities. Description: Description: Our client a Geotechnical & Environmental Sciences Consultant has an urgent need for a Construction Materials Testing Field Inspector in Phoenix, AZ. -The successful candidate should have a thorough understanding of standard test methods for all tests performed by a Field Technician, and perform these tests in the field. -Duties will include the testing of soil, concrete, and asphalt, maintain test reports, letters, and other pertinent field data, as well as completing field reports, and communicating with Project Management and Field Manager to successfully complete tasks. Education: The successful candidate should have 1-5 years of previous soil and concrete testing experience. ACI Field certifications required. ATTI certification preferred. Required Skills: Candidate should have excellent verbal and written communication skills, must be a team player with the ability to work alone at times or on remote jobsites. Must have a current valid driver's license and a good driving record since you will be driving a company vehicle. Staff Experts, LLC is an Equal Opportunity Employer. Staff Experts, LLC (Mesa Branch) 2222 South Dobson Road. Suite 502 Mesa, AZ 85202 602-666-6500 Office 602-391-2369 Fax

Job Description About Alta Environmental and Infrastructure Alta Environmental and Infrastructure (Alta E&I) is a cultural based Environmental and Infrastructure company delivering innovative engineering solutions that strengthen communities and protect the environment using a small business approach with big business horsepower. We specialize in sustainable development, urban planning, and environmental protection for public and private sector clients. Position Summary As a Special Inspector at Alta E&I, you'll serve as the day-to-day eyes and ears on construction sites, performing inspections and materials testing in accordance with project specifications and building codes. Areas of inspection may include soils, concrete, masonry, structural steel, fireproofing, and more. Work is conducted independently under the guidance of a Professional Engineer or Project Manager. Responsibilities • Perform field testing, observations, and inspections per project requirements., • Read and interpret construction drawings and specifications., • Draft clear inspection reports for Project Manager review., • Analyze data for accuracy before reporting findings., • Communicate effectively with project teams., • Adhere to OSHA and company safety standards, complete safety training., • Conduct pre-task planning and report safety concerns., • Maintain personal field equipment., • Pursue and maintain relevant certifications (e.g., ICC, AWS CWI, PTI). Requirements • 2–4 years' experience as an Engineering Technician or similar; 5+ years considered for senior roles., • High school diploma or GED., • Valid driver's license and clean driving record., • Strong communication skills (written and verbal)., • Ability to work independently and as part of a team., • Proficiency with interpreting structural plans, • Performing materials testing per standards, and concise reporting., • Physically able to work in varying weather conditions and environments (elevated surfaces, confined spaces)., • Preferred certifications: ATTI, ACI, Radiation Safety, Nuclear Gauge operation. Why Join Alta? • Cultural based company focused on keeping the smaller family feeling., • Opportunity to lead and mentor skilled field teams., • Work alongside experienced professionals within the civil community., • Complete impactful and diverse portfolio of projects., • Encouragement towards professional growth in a supportive environment. Benefits • Competitive pay and bonuses., • Health, dental, and vision insurance., • 401(k) with company match., • Flexible work environment and career development opportunities. Equal Opportunity Employer Alta E&I is committed to a workplace free of discrimination based on age, color, sex, disability, national origin, race, religion, or veteran status. Note: Selected applicants must pass a background check and drug screening.

Job Description Geo Technical Materials Testing Lab Technician Entry to mid-level position testing soils, concrete, and asphalt construction materials in a busy fast-paced environment. General Responsibilities: The following is intended to provide general guidance, but is not intended to limit the scope of this position.. • Understand and perform construction materials testing according to ASTM, AASHTO, and ARIZ test methods., • Monitor for and troubleshoot irregularities in testing of construction materials., • Ensure that all supplies and resources needed to carry out the day’s work load are obtained., • Maintain all equipment in clean, safe and good working condition., • Appropriately respond to inquiries and complaints from clients and employees, and bring them to the attention of pertinent management staff when necessary., • Expand knowledge and professionalism in construction materials testing through continuing education by obtaining certifications through ATTI and ACI. To perform the requirements of this position effectively, an individual must be able to perform each essential duty satisfactorily. The following requirements are representative of the knowledge, skills and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Minimum of a high school/GED diploma, with a minimum of 1 year work-related experience., • Working knowledge of basic computer operations., • Possesses basic mathematical skills., • Ability to work independently, establish and maintain effective professional working relations with others., • Ability to carry out detailed written or oral instructions on an independent basis., • Ability to be proficient in time management, • Ability to follow and carry out specific instructions on an independent basis., • Ability to multi-task and adhere to timelines and deadlines, • Ability to apply standards, rules, policies, and procedures to formulate sound and well-supported conclusions. Certifications, Licenses, Registrations and other training that may apply to this position include, but are not limited to the following: DESIRED Clean and Valid Driver’s License Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is frequently required to stand up to 8 hours or more at a time. The employee may frequently lift and/or move up to 30 pounds, occasionally lift and/or move up to 125 pounds. Work Environment The work environment is both indoors and outdoors, in all weather conditions, depending on assigned duties. Job Types: Full-time, Part-time Job Type: Full-time Powered by JazzHR BuX4glQvfR

Job Description Lab Technician COMPANY OVERVIEW: Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, RMA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Job Summary: CMT (Construction Materials Technician) lab technician performs laboratory tests on various construction materials like soil, concrete and asphalt to ensure they meet quality standards and project specifications, in our Arizona offices. Duties/Responsibilities: Perform Variety test on soils using ASTM methods, Ensure all tests are perform accurately and in a timely manner, record test results neatly, Maintain Lab equipment (cleaning, calibrating, organizing), Communicate with lab manager regarding samples and testing, Work well in a team environment, Follow safety protocols, Be able to lift materials and equipment up to 50 Ibs. , Attention to detail Education/Qualifications: College grad (not required), High School Grad / GED equivalent Physical Demands • Physical examination required to obtain medical clearance to work, • Ability to stoop, kneel and to routinely lift and carry 50 pounds, • Clean driving record and capable of being insured for driving company vehicles, • Able to work in variable outside conditions, including extreme heat or cold if need We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions.

Job Description The Service Manager is responsible for the delivery of service and sales of their assigned region. The role manages Service Technicians, sub-contractors, vendors, and customers. The position oversees all incoming repair requests and preventative maintenance jobs that the customer assigns. The role is responsible for scheduling, estimating, Service Technician management/training, and customer development. The Service Manager develops and maintains a relationship with the customer and ensures the quality of work and adherence to customer-specific Key Performance Indicators (“KPI”’s) are met. Cirks Construction Inc. (CCI), dba KDC Construction is a leader in the construction industry with diverse individuals dedicated to our people, customers, projects, and community. We are maintaining a strong focus on building a culture that encourages our employees to grow personally and professionally. KDC is also a proud recipient of the Top Workplaces 2022, 2023, and 2024, presented by the Orange County Register. Apply if you: • Bring a cooperative spirit to your team and neighboring department., • Have an understanding that through your contributions, you aid in the overall Company’s success., • Pursue continuous efforts to see beyond current business modes and methods., • Embody an understanding that as a committed team member, tenure with an organization is achievable. Synergy – bring a cooperative spirit to your team and neighboring departments. Marketing – understanding that through your contributions, you aid in the overall success of our Company. Innovation – continuous efforts to see beyond current business modes and methods. Longevity – understanding that tenure with the organization is achievable as a committed team member. Excellence – bring your whole self to work. Applying your knowledge, skills, and abilities ensures that every task you perform is performed at the highest level. Essential Job Functions • Oversee both field and office operations to ensure smooth and effective service delivery., • Manage employee performance, control labor and material costs, and ensure service levels meet or exceed customer expectations., • Responsible for managing a designated budget to meet financial expectations., • Ensures timely follow-up and resolution to work exceptions., • Ensures and validates the quality of work provided., • Ensures timely proposal submittals to customers., • Prepares estimates including time and materials to complete large scopes of work requiring return trips., • Conduct employee performance reviews, provide coaching, and foster professional development., • Ensures proper safety rules, regulations, and incident reporting are followed., • High school diploma or equivalent., • Strong technical knowledge and experience in General Building, Plumbing and Electrical trades., • Positive customer focus, always considering the impact on our customer and their customers., • Ability to interact with a diverse customer roster., • Carefully considers cost/benefits., • Strong written and verbal communication skills., • Demonstrates attention to detail, creative problem-solving, and analytical skills., • Able to deal with frequent change, delays, or unexpected events and communicate accordingly., • Supports the organization’s goals and values., • Look for ways to improve and promote quality., • Follow all Company and customer policies and procedures., • Possess the vehicle and tools required to perform job functions., • Proficient with computers and familiar with Microsoft Software Suite., • Medical insurance, • Dental HMO and PPO insurance, • Vision insurance, • Life/AD&D insurance, • Flexible Spending Accounts – Unreimbursed Medical and Dependent Care, • 401(k) retirement plan, • Vacation and Sick Time From original plans through completion, KDC Construction provides dedicated service in estimating, pre-construction, scheduling, budgeting, procurement, warehousing, and field management. We have the unique capability to self-perform fast track projects with contractor licenses in General Building, General Engineering, Mechanical, and Plumbing; employing expert craftsmen from numerous trades.Founded in 1996, KDC Construction offers commercial construction services in California and neighboring states in various market segments. Our diverse team of professional project managers and superintendents brings extensive knowledge and leadership to each project while exceeding customer expectations. KDC has longstanding relationships with pre-qualified subcontractors and suppliers from wide-ranging disciplines.\r\n\r\nFrom original plans through completion, KDC Construction provides dedicated service in estimating, pre-construction, scheduling, budgeting, procurement, warehousing, and field management. We have the unique capability to self-perform fast track projects with contractor licenses in General Building, General Engineering, Mechanical, and Plumbing; employing expert craftsmen from numerous trades.

Job Description Bemana is hiring Utility Protective Relay Technicians in the greater Tempe, AZ area for an organization focused on providing reliable, affordable and sustainable water and energy to more than 2 million people in central Arizona BENEFITS: • Pay: $104k - $140k/year (based on experience)., • Eligible for OT., • Sign-On Bonus, • Relocation Assistance, • 401k + match, • PTO + Holidays, • Health, Dental & Vision Relay Commissioning & Testing • Programs settings on microprocessor relays and other intelligent electronic devices, • Commission and energizes protective relaying systems, telemetry devices, and other intelligent electronic devices through validation of wiring, settings, communication protocols and logic, • Uses test equipment to simulate faults to validate protective relay systems, • Performs preventative and corrective maintenance of protective relaying systems and other intelligent electronic devices, • Develops and submits all commissioning and maintenance testing documentation for asset management and regulatory compliance, • Must be available to work overtime and accept callouts, • Assists with Protection Automation & Control Construction responsibilities as assigned Protection Automation & Control Construction • Provides on-site project management (planning, organizing, leading, and controlling) by providing direction and oversight to field personnel and contingent workforces, • Outage coordination for generation, transmission, distribution, and industrial customers, • Maintains quality assurance and quality control through reviewing and correcting protection and control engineering design prints, • Responsible for installation strategy (panel construction, procurement, wire pull schedules, field wiring, etc.), • Performs installation quality assurance and quality control through field wiring checks and supporting with scheme checks, • Must be available to work overtime to meet project milestones, • Assists with Relay Commissioning & Testing responsibilities as assigned What It Takes To Succeed: • Knowledge of the principles of electrical and electronic theory, • Knowledge of algebra, geometric, trigonometric, and statistical concepts, techniques, and procedures, • Knowledge of personal computer operation and transient cyber assets Knowledge of relay and test set applications, • Knowledge and understanding of protective relay theory, principles, and applications, • Knowledge of commissioning, protective system testing and construction processes, • Must be available to work overtime, • Performs related work as required and/or assigned, • Attends training programs, seminars, conferences, and meetings, • Assists engineers and other personnel, • Assists in directing other technicians, apprentices, and trades helpers Experience If your experience matches the description above, submit your resume, and one of our recruiters will be in touch to tell you more about the position and learn more about your experience and aspirations. If your experience does not match this job description, we still encourage you to reach out to one of our recruiters, so we can learn about your professional aspirations for future job openings. About Bemana Bemana provides recruiting services to the nation's equipment and industrial sectors. Our clients and candidates value us for our specialized recruiting expertise, vast knowledge of the equipment and industrial job market, and ability to solve their most challenging employment needs. We have successfully recruited thousands of top-level professionals filling a wide range of management, sales, engineering, and technical positions across the nation. Welcome to Bemana and we look forward to getting to know more about you. Referral Program Bemana offers a $500 reward for referrals that lead to a hire. So, if this job or location is not for you, but you know someone that might be interested, send them this link and we'll send you a check if they get hired. Terms & conditions apply.

Job Description Solterra Materials Be the driving force of your success! Come join our Award Winning Team. Solterra Materials strives to recruit top talent and we are committed to help you grow both professionally and personally. We are confident you will find our Company a dynamic and rewarding place in which to work. Solterra offers employees: • Competitive Weekly Pay, • Paid Time Off, • 401(K) Employer Match, • Tuition Reimbursement, • Comprehensive Health Benefits including; Health, Dental, Vision The Quality Control Technician is responsible for sampling and testing raw materials incorporated into asphalt mixtures and end product asphalt mixtures during daily production. ESSENTIAL DUTIES AND RESPONSIBILITIES • Employee shall perform all duties and responsibilities with Solterra Material's Core Values at the forefront., • Must be an advocate of safety and follow safety policies and procedures., • Conduct all testing in accordance with Solterra Materials Quality Control Standard Operating Procedure., • Field sample asphalt mixtures from jobsites, • Sample and test stockpiled aggregate materials for mix designs, mix design verification and crusher control., • Field and plant sample asphaltic concrete materials and perform tests for compliance with project specifications., • Assist with 3rd party sampling at the plant sites., • Maintain a clean and orderly working environment in and around Solterra lab locations., • Maintain, operate, and calibrate equipment to ensure accurate and representative test results., • Properly document, file and share test results., • Promptly report any material deficiencies to Product Quality Supervisor and plant personnel as necessary., • Obtain and maintain certifications necessary for job duties (ATTI), • Any, and all other duties assign Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. SUPERVISORY RESPONSIBLITIES • This position has no supervisory responsibilities. COMPETENCIES • Collaboration Skills, Communication Proficiency and Customer/Client Focus., • Leadership, Decision Making and Ethical Conduct., • Problem Solving and Thoroughness. SAFETY • This position is considered safety sensitive position and is subject to the company's drug and alcohol policy, as well as all OHSA regulations., • All employees must wear the appropriate personal protective equipment (PPE)., • Serves as a safety ambassador by complying with federal, state and local laws, as well as Company safety policy, follows safe work practices, and proactively identifies and remedies worksite hazards. PHYSICAL DEMANDS AND WORK ENVIRONMENT • This is a field and laboratory position. Employee will be working in the field and in construction materials testing laboratory., • Employee may spend extended periods of time standing., • Lifting 50 lbs., • Extended periods of time outdoors, in extremely hot and cold temperatures. POSITION TYPE/EXPECTED HOURS • This is a full-time position. Flexible hours and work locations required, • Approximately 5 hours of overtime per week, is to be expected., • Must be willing to work nights and weekends, to meet business demands. TRAVEL • Occasional out of town travel may be required. MINIMUM QUALIFICATIONS Education and Work Experience • A high school diploma or GED is required, College degree preferred., • Five (5) or more years of construction materials transportation experience., • Operating knowledge of transportation software programs., • Ability to understand and follow verbal and written instructions., • Must be able to communicate effectively with a professional demeanor., • Must be able to handle stressful situations with emotional intelligence., • Solid written and verbal communication skills., • Strong math and problem-solving skills., • Must be able to multi-task and manage competing deadlines in an organized manner., • Must be fluent in English, i.e. must be able to speak, read and write English. CERTIFICATIONS, LICENSES & REGISTRATIONS • Must have a valid driver's license and a clean motor-vehicle record. A CDL license is preferred and may even be required for some departments/divisions., • Passing a pre-employment drug and alcohol screening and background check is required. AAP/EEO STATEMENT Solterra Materials (Sunland Asphalt & Construction, LLC.) is an equal employment opportunity employer Job Posted by ApplicantPro

Job Description Shop Technician Job Description: UAS Technician We are seeking a hands-on and detail-oriented UAS Technician to join our team in supporting the build and manufacture of Group 3 Unmanned Aircraft Systems (UAS). This role is critical in the assembly, integration, and testing of aircraft and associated ground support equipment, ensuring high standards of quality and performance. The ideal candidate will have experience in mechanical assembly, wiring, system integration, and troubleshooting. Key Responsibilities · Assemble Group 3 UAS platforms and associated subsystems from components to fully functional systems. · Manufacture, integrate, and test UAS airframes, payloads, avionics, propulsion, and ground control equipment. · Perform wiring and mechanical integration following engineering drawings, assembly instructions, and standard operating procedures. · Build and modify wiring harnesses according to engineering drawings, ensuring all connections are reliable and meet project specifications. · Troubleshoot and resolve mechanical, electrical, and software issues during assembly and testing using instruments such as multimeters and oscilloscopes. · Software Configuration: Configure firmware and parameters and calibrate aircraft systems. · Support functional checks, system-level integration, and ground testing of aircraft and GSE (Ground Support Equipment). · Document assembly processes, modifications, and maintenance activities accurately and clearly. · Work closely with engineering, production, and flight operations teams to ensure systems are built to specification and delivery timelines are met. · Maintain a clean, organized, and safe work environment. Required Qualifications · High school diploma or equivalent (technical school or associate’s degree in a related field preferred). · 2+ years of experience in UAS, aerospace, aviation, or related technical manufacturing fields. · Hands-on experience with mechanical and electrical assembly, soldering, crimping, and routing. · Familiarity with UAS systems, avionics, sensors, power systems, and GSE components. · Ability to read and interpret technical drawings, wiring diagrams, and schematics. · Strong attention to detail and commitment to quality. · Ability to lift 50 lbs and work in manufacturing/warehouse environments. · U.S. Citizenship required; eligibility for DoD clearance may be preferred depending on the role. Preferred Qualifications · Experience working with Group 2–3 UAS platforms or small tactical UAS systems. · Knowledge of composite airframe construction and repair. · IPC certification (e.g., soldering or wire harnessing standards). · Experience using ERP systems and documenting build processes. Salary: $24.00 - $31.00 per hour Schedule: ● 8 hour shift ● Day shift ● Monday to Friday Ability to commute/relocate/travel for work. ● Phoenix, AZ 85024: Reliably commute or planning to relocate before starting work (Required) Work Location: One location Company DescriptionSpektreWorks is a leading OEM of drones for defense customers.SpektreWorks is a leading OEM of drones for defense customers.

Job Description Overview The Tower Technician plays a crucial role in the installation, maintenance, and repair of equipment located on telecommunications towers. This position involves working at heights to ensure that communication systems are operational and meet industry standards. The ideal candidate will have a strong understanding of various technologies, including LMR, MW, LTE and fiber optics, and will be comfortable working in diverse environments. Duties • Install and maintain telecommunications equipment on towers, including antennas and cabling., • Conduct routine inspections and troubleshooting of equipment to identify issues., • Operate bucket trucks safely for high-altitude work., • Climb towers as needed to perform installations or repairs while adhering to safety protocols., • Collaborate with field service teams to complete projects efficiently., • Proficient in low voltage cabling practices., • Familiarity with LMR, LTE, MW technologies is essential., • Experience with rigging and climbing techniques for tower work., • Ability to operate bucket trucks safely and effectively., • Strong problem-solving skills with attention to detail in troubleshooting equipment issues., • Excellent communication skills for effective collaboration with team members and clients. This position requires a commitment to safety standards and the ability to work in various weather conditions while maintaining a positive attitude towards teamwork and customer service. Job Type: Full-time Pay: Depending on experience Benefits: • 401(k) matching, • Disability insurance, • Life insurance, • Paid training, • Professional development assistance, • Referral program, • Safety equipment provided, • Construction site, • First Aid Certification (Required or ability to obtain within 30 days), • OSHA 10 (Required or ability to obtain within 30 days), • CPR Certification (Required or ability to obtain within 30 days)

Job Description The Building People, LLC, has a position open for a full-time Cost Engineer/Estimator in Phoenix, AZ. The Engineering Technician shall assist provide the customer with technical support and inspection services relating to maintenance, repair, or alteration of buildings, utilities, parking areas, roadways, and other work/projects on both leased and owned properties. Responsibilities/Duties • Utilize Facilities Management software to review estimates submitted by contractors for maintenance, repair, construction, and other work to assure conformance with customer requirements. Ensures that proposals are technically sound and in compliance with Army regulations., • Performs technical review & evaluation of plans and reports required to be submitted by the contractor including: Preventative Maintenance Plans for building structures, Quality Assurance Plans, as-built drawings, shop drawing submissions, and change order requests., • Reviews drawings and specifications developed by A/E firms for adherence to design requirements, code limitations, and civil, structural, architectural, and engineering fundamentals and principles., • Prepares cost estimates, technical specifications, preliminary sketches, & scopes of work for the contract purchase of complex repair and construction items, designs, and plans for alterations, remodeling, and repairs to various types of facilities, machinery, and equipment, new construction, and the development of contracts with organizational policies and procedures., • To include estimating the cost of manpower and material, estimating length of time the projects will require, determining and analyzing alternatives when appropriate., • Prepares contract modifications and design deficiency reports., • May be required to make site visits for the purpose of studying conditions/gathering information to be used in preparation of drawings, etc. Required Experience & Skills To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Detailed knowledge of methods and techniques of engineering and the construction, application, properties, operation, and limitations of engineering systems, processes, structures, machinery, devices, and materials., • Knowledge and experience of HVAC systems, machinery, plumbing/piping, ventilation, fire protection, digging, shoring, lighting, and similar types of equipment and systems., • Experience conducting building inspections/facility condition assessments., • Must possess practical working knowledge and experience to develop detailed specifications, cost estimates, and project schedules., • Must be able to read and interpret drawings and blueprints., • Ability to work independently, efficiently, and prioritize effectively in order meet project deliverables and deadlines. Must be flexible and be able to adapt to rapidly changing requirements and timelines., • Familiarity with standard CMMS systems, RS Means & various industry estimating tools, Auto-CAD, MicroStation, and Microsoft Suite., • Must be able to read and accurately interpret contract documents. While performing the duties of this Job, the employee may be asked to walk/stand/bend/climb for extended periods. The employee may occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. May be asked to drive for several hours during the course of site inspections/investigations. Work Environment - The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee will normally work in a temperature-controlled office environment, with frequent exposure to electronic office equipment. During visits to areas of operations, may be exposed to extreme cold or hot weather conditions. Is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and loud noise. Required Education • Currently favorable, or eligible for a National Agency Check with Inquiry (NACI) clearance, in accordance with AR 38067., • Valid Driver’s License., • EEP, CEM, or Tridium N4 certifications preferred but not required.

Job Description Empower your Future at the Nation’s Largest Independent Electrical Distributor! At U.S. Electrical Services, Inc. (USESI), we combine over 100 years of expertise, $150M+ in inventory, and the power of 2,000+ dedicated employees across 150 locations to deliver excellence every day. As a family of 14 regional businesses, we thrive on innovation and teamwork, empowering our people to shape the future of the electrical industry. Visionary Electrical Solutions, Inc. (VES), a division of U.S. Electrical Services, Inc., is a newly formed company focused on the prefabrication of electrical systems for the commercial construction market. Although the company is newly formed, the staff is composed of industry professionals that pioneered the business; the staff have over 15 years of direct industry experience and have completed hundreds of projects throughout the United States. With our direct-to-market approach and supported by a well-established and financially successful parent company, we have every confidence that Visionary Electrical Solutions, Inc. Will become the industry and market leader in a very short time. VES is looking for a CAD Technician for its Mesa, AZ location. Duties/Responsibilities: • Help develop and maintain CAD standards and procedures., • Attend regular development meetings., • Collaborate with the engineering team to modify existing drawings in both PDF and CAD formats., • Create new 2D design drawings as directed by the engineering team ensuring that standardized nomenclature is maintained., • Maintain an up-to-date knowledge of CAD software and related technologies., • Other duties as assigned by management., • Operate and print completed sheets on color plotter., • Be attentive to scheduling deadlines and be committed to ensuring timelines are met Qualifications / Requirements: • Minimum 2-year degree in related field (preferred), • Bachelor's or Certifications (preferred), • 2+ years' experience utilizing CAD software as a Designer, Designer/Drafter or Draftsperson in the areas of architecture, electrical, or mechanical specialties however any discipline will be considered for candidates that possess excellent working knowledge with AutoCad and associated software products., • Strong organizational skills, • Excellent attention to detail At VES, we believe that our benefits should make a difference—to you, your job, and the life you lead outside of work. We are dedicated to supporting our most valuable asset, our employees! Full-time employees are eligible for the following comprehensive benefit plan: Full-time employees are eligible for the following comprehensive benefit plan: • Health insurance (medical/dental/vision), • TeleMedicine, • Company Paid Life Insurance & AD&D insurance, • 401(k) Retirement Plan with company contribution, • Paid Holidays, • Personal Leave Time (vacation and sick leave), • Flexible Spending Accounts, • Employee Assistance Program (EAP), • Choice of voluntary benefits including identity theft, • Product discounts It is the policy of USESI and its affiliates to consider applicants for all positions without regard to race, color, religion, creed, gender, gender identity, national origin, age, disability, marital or veteran status, or any other legally protected status. USESI is committed to providing reasonable accommodations to qualified individuals with disabilities. If you need an accommodation to apply for a job, please contact the Human Resources department

Job Description Why DH Pace? DH Pace Company is a distribution, construction and service organization offering a complete range of door and door related products and commercial security products. The company is privately owned and has been in operation over 95 years! We have 50+ US offices in 24 states with 2024 company-wide sales over $1 billion. Our mission is to enhance the communities we serve by improving the safety, convenience, and aesthetics of the buildings where we live, work, and play. Our foundation of values represents who we are and what we stand for. Values are never situational or circumstantial, they are always and forever. Our core values are R.I.S.E. Respect, Integrity, Service, and Excellence. DH Pace Company, Inc., is seeking an experienced Technician/Installer in our Tempe, AZ location! This individual will be responsible for Installation and of Commercial Electronic Security Systems such as; Access Control Systems, CCTV/Video Monitoring, Intrusion Alarm Systems, ID Badge Systems, Intercoms/Emergency Phones, and Parking Control/Turnstiles from start to finish. You will also interact with customers, vendors, other service providers to troubleshoot potential issues and discuss trends in the field. Job Responsibilities: • Installation of Access Control, CCTV, Intrusion Detection, Intercom, Emergency Phone, and Parking Revenue Systems, • Interact with Customers, Vendors, and other Contractors on-site to properly coordinate successful installations, • Drive to the jobsites per instruction of manager, assess customer's installation or service/repair needs and complete the repair of the product to the customer's satisfaction, • Consistently seek and promote business opportunities for service, sales and preventative maintenance contracts. Acquire knowledge of all products, • Maintain safe working environment and upon completion of day's work ensure job site is clean and clear of debris., • Ensure that all job tickets and time sheets are completed to ensure all tickets are processed in a timely manner and all time sheets reach the payroll department before cutoff, • Complete all job and collects COD's when applicable; call management if a problem occurs with the collection or scope of work changes (COD is very rare for ISS), • Maintain inventory on truck and have knowledge and understanding of all parts, part numbers and part descriptions Job Requirements: • 2 - 4 years of experience installing electronic security systems for commercial facilities preferred, • High School Diploma or GED, • Must possess valid driver's license, • Strong troubleshooting skills, • Electro/mechanical aptitude, • Understanding of relay logic, • Basic networking skills Our benefit offerings include: • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, and drug screen required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job DescriptionJob Title: Medium Voltage Technician it's what's inside that counts There’s more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it’s the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: • Day 1 Benefits Coverage with low cost Medical, Vision, Dental, • Day 1 Paid-time Off and Vacation, • 4.5% Company Match 401(k) plan, • $500 Annual Company-paid Lifestyle Benefit, • Competitive Compensation and Bonuses, • Company-paid Life and Disability Insurance, • Employee Stock Purchase Plan, • Ability to troubleshoot all aspects of Medium/High Voltage equipment for an industrial steel production facility, • Lead facility’s annual testing and inspection requirements, • Diagnose and remedy complex problems related to incoming power irregularities and substation problems, • Diagnose and remedy complex problems related to transformer protection Relays, complex faults and trips in all protective, • Assist in developing other team member’s skills and knowledge, • Serve as Shift Supervisor in his/her absence and provide supervisory support, as necessary, • Install, monitor, inspect, troubleshoot, and ensure reliability of all electrical, electronic control systems and components, process equipment, and AC/DC utilities, • Perform troubleshooting and repair or replacement of defective and damaged parts, • Learn and maintain the variety of electromechanical starters and motors using sophisticated electronic interface boards, VFDs, PLCs, HMIs, instrumentation, and controllers, • Procure supplies and spare parts to ensure effective and timely maintenance of equipment, • Maintain and revise instruction manuals, drawings, schematics, maintenance logs, and other documentation, as required, • Performs other duties as assignedWhat You'll Need, • Minimum 2 years electrical maintenance experience preferred, • CMMS experience preferred, • PLC troubleshooting experience preferred, • Required to know and understand Grounding systems and Maintenance, • Must understand and demonstrate abilities in the following; Electrical and Mechanical Maintenance, Hydraulics and Pneumatics and Arc Flash Safety, • Must understand and demonstrate abilities in the following; Predictive Maintenance Technology, Furnace Grounding Systems and Testing, Induced Harmonics and related mitigation technology, • Experience with Electrical relay control maintenance and repair proficiency, especially for cranes, • Extensive experience in maintenance of electrical control and distribution systems and analog and digital circuits, • Extensive experience in maintenance of relay and ladder logic, industrial communications networks, instrumentation and automation control systems, • Experience or formal education and lab training on PLCs, or the ability to navigate block logic, ladder logic, or other digital logic interfaces, • Experience with MRO system, SAP system preferred, • Experience in manufacturing equipment processes and working knowledge of associated controls, • Training and/or experience in instrument and sensor calibration, • Knowledge of hydraulic and pneumatic circuit components, • Competent in the use of hand tools as well as electrical and electronic test equipment, • Experience in a heavy industrial environment is preferred, but not required, • Experience with industrial electrical repairs including troubleshooting and repair of electrical valves and switches, • Experience with industrial electrical repairs including troubleshooting and repair of A/C - D/C drives and motors, PLC's and 480 Volt 3 phase electrical, • Possess specific knowledge of both hydraulic and electrical systems and equipment, • Must be able to read technical documents and manuals and write job instructional training documents, • Must be able to work effectively with others by sharing ideas in a constructive, positive manner, • Must practice safe working habits and follow OSHA, EPA, and company safety policies, rules, and regulations, • Must be able to push and pull up to 90 lbs, carry 50 lbs, and climb ladders and steps, • Must be able to work overtime and cross train as required, • Must be able to work outside under all weather conditions, including extreme heat and cold temperaturesYour Education, • High School Diploma or GED required If you’re ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you’re ready to join CMC. Apply today and start moving your career — and our world — forward. Let's build a better world! CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. You should be proficient in: • 120/208/240/480 Voltage Systems, • Commercial Electrical Expertise, • Electrical Troubleshooting, • Programmable Logic Controller (PLC) (Siemens)

Job Description Are you hardworking? Do you like a fast-paced, exciting environment? Are you a problem solver? If you are looking for a career with a company that rewards boldness and perseverance, this is the job for you. As a maintenance technician for Optima, you will have the opportunity to work directly for the developer performing maintenance service for a luxury apartment community. You will complete service requests, unit turns, preventative maintenance, and other functions throughout the property. We believe that maintenance plays one of the most critical roles in the success of our properties. About Optima Optima is a design-driven real estate development firm rooted in the modernist tradition with offices in Illinois and Arizona. For more than 40 years, we have been developing, designing, building, and managing striking urban and suburban luxury residential communities. From the beginning, we aimed to reinvent housing by integrating the functions involved in new construction within one company. We control and execute every aspect of the process in-house – development, architecture, construction, sales, and management – for a dynamic system that offers greater focus and fluidity. We are committed to delivering extraordinary living through design, innovation, sustainability, and management. What You'll Do • Responsible for apartment home make-readies/turns, including but not limited to; painting, faucets, blinds, drains, drawers, smoke detectors, doors, garbage disposal, locks and light bulbs., • Turnover vacant units in preparation for future residents, • General upkeep of the property and grounds including amenity areas, • Ongoing preventative maintenance with the team to ensure the property remains in top condition, • Perform general carpentry, electrical, HVAC and plumbing repairs, • Record and maintain files including work order notes, daily logs and on-call sheets, • Serve on the on-call team, rotating after-hours availability, • Outgoing and positive attitude with exceptional customer service skills, • Strong communication and people skills, • Ability to work independently, expertly, and to multi-task, • Reliable and responsive with a strong work ethic, • Thorough knowledge of preparing for resident move ins and outs, as well as general repair skills, • General maintenance knowledge in plumbing, HVAC, electrical, drywall and appliance repair, • Possession of a current and valid driver’s license, • Physical capacity to lift 100 lbs., including lifting and moving packages, • Work a flexible schedule to include weekends, evenings and holidays., • High school diploma or equivalent, • Pay: $21- $22/hr. plus renewal bonus, • Competitive benefits and great perks make a huge difference; we get that, so you’ll get them too. Team Members receive a competitive 401k match, paid parental leave, paid time off, and a 100% company paid medical plan option. At Optima, we believe benefits should be meaningful and a part of what makes us great! OkMu48cV5c

Job Description Why join ATCO: ATCO is committed to operational excellence and empowering our employees to do their best by supporting their health and drive to learn more. Besides competitive salaries, we offer the following • Health, Dental, and Vision benefits, • Company paid Life/AD&D /STD/LTD Plans, • 401(K) plan with Company match, • Employee Share Purchase Program (ESPP) with Company match ATCO STRUCTURES AND LOGISTICS (USA) INC. (“ASL-USA”) is seeking a Yard Maintenance Technician for our Space Rentals location in Phoenix, Arizona. The role of Yard Maintenance Technician is responsible for keeping the grounds and buildings maintained using necessary equipment as well as keeping machinery and other equipment detailed. KEY ACCOUNTABILITIES/ RESPONSIBILITIES include the following. Other duties may be assigned. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Perform general yard maintenance and overall preparation of lease fleet: spraying weeds, mowing, weed trimming, picking up trash, and maintaining overall cleanliness of the buildings, • Perform "make-ready" cleaning of units prior to lease, • Ensure all tires are inflated properly on all buildings and equipment on the line and sales lot, • Occasional maintenance of company-owned equipment (forklifts, gators, company trucks), • Operate the forklift to move and store buildings in the yard, • Ensure the supplies are replenished and the Yard is both organized and free of debris and potential hazards., • Perform service-related tasks in the yard as requested. REQUIRED QUALIFICATIONS/EDUCATION/WORK EXPERIENCE • 2 Years’ experience with general labor and general repairs., • High School Diploma or GED is preferred., • Electrical, plumbing, and welding experience is a plus. The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Position requires nearly constant physical activity, including the ability to walk and stand for extended periods, 6-8 hrs a day., • Position requires regular use of hands/arms with ability to reach and grab, 6-8 hrs a day., • Constant ability to speak/hear and use specific vision abilities such as close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, 8-10 hrs a day., • Requires frequent and regular handling (lift or carry) of objects up to fifty (50) pounds, 2-5 hrs a day., • Position may require occasional need to stoop, kneel, crouch, or crawl; climb or balance 0-2 hrs a day. WORK ENVIRONMENT The work environment characteristics described herein are representative of those employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Work environment involves moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises., • Work environment involves some exposure to hazards or physical risks, which will require following basic safety precautions and ability to wear assigned and appropriate Personal Protection Equipment (PPE). ATCO is an Equal Employment Opportunity ("EEO") Employer committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. ATCO is a drug-free workplace and participates in the E-Verify program as required by law

Job DescriptionJob Title: Facilities Maintenance Technician Job Description We are seeking a skilled Facilities Maintenance Technician to assist with a variety of facility maintenance projects and tasks. This role involves responding to work orders, performing mechanical, electrical, and plumbing work, and managing outside vendors. The technician will also be responsible for identifying HVAC issues and logging information using an iPad or iPhone. Responsibilities • Assist with facility maintenance related projects and tasks., • Respond to work orders across all buildings., • Perform mechanical work, including painting, patching holes in drywall, hanging pictures and whiteboards or TVs, changing filters, and assembling furniture., • Conduct electrical work such as changing outlets, switches, and lights., • Perform plumbing work like fixing leaking sinks or faucets., • Identify HVAC issues and alert appropriate personnel., • Manage outside vendors and verify their work., • Night Shift: 6:00PM - 4:30AM Monday - Thursday, • 1+ year of facility maintenance experience in multifamily, apartments, hotel, industrial, residential, or commercial settings., • Experience with hand tools and power tools., • Basic plumbing skills such as fixing leaking sinks or faucets and adjusting toilets., • HVAC skills including changing filters., • Ability to use computers, iPads, or iPhones to look up work orders., • 2+ years of facility maintenance experience in any environment., • Ability to change light bulbs, switches, and outlets., • Exposure to CMMS and automated building controls., • Experience in repair, preventive maintenance, and construction services. Join a company where internal promotions are highly valued, with the majority of employees advancing from entry roles to management. Enjoy comprehensive health, vision, and dental benefits, along with a competitive salary and 401K with employer match. Benefit from a supportive parental leave policy and work in an award-winning environment. Be part of a company on track to becoming a $1 billion business, with significant growth in stock value. Work Environment Work across five properties, including manufacturing, office space, and warehouses. The company is expanding by 200k square feet and is focused on building a construction-focused team. Enjoy a supportive work culture with opportunities for growth and development. Job Type & Location This is a 6 month Contract to Hire position based out of Scottsdale, Arizona. Pay and Benefits The pay range for this position is $22.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Scottsdale,AZ. Application Deadline This position is anticipated to close on Sep 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Summary We are seeking a dedicated and skilled Technician, or Entry Level Technician, to join our team in the restoration industry. The ideal candidate will have experience in various restoration services, including fire and water damage restoration, mold remediation, and asbestos abatement. This role requires a strong attention to detail, proficiency with hand and power tools, and a commitment to delivering high-quality service to our clients. Duties • Perform cleaning and restoration tasks related to fire and water damage., • Conduct mold remediation processes in compliance with safety standards., • Utilize hand tools and power tools effectively for various restoration projects., • Execute carpet cleaning services as part of the restoration process., • Assist in asbestos abatement projects while adhering to safety regulations., • Collaborate with team members to ensure timely completion of projects., • Maintain a clean and organized work environment at all job sites., • Previous experience in the restoration industry is preferred but not mandatory., • Familiarity with cleaning techniques and equipment used in restoration work., • Knowledge of fire restoration, water damage restoration, mold remediation, and asbestos abatement practices is advantageous., • Experience in construction or related fields is a plus., • Ability to operate various hand tools and power tools safely and efficiently. We encourage individuals who are passionate about restoration work and eager to learn new skills to apply for this position. Join us in making a difference for our clients by restoring their properties to their original condition.Company DescriptionWe are a fast growing restoration company located in Tempe, AZ. We specialize in water damage mitigation, mold remediation, bio-hazardous cleaning, and fire damage mitigation. We currently are growing our team and looking for individuals who want to grow with us.We are a fast growing restoration company located in Tempe, AZ. We specialize in water damage mitigation, mold remediation, bio-hazardous cleaning, and fire damage mitigation. We currently are growing our team and looking for individuals who want to grow with us.

Job DescriptionCompany Description Forever On! From the start in 2008, T5 has been focused on supporting enterprise and hyperscale customers with customized data center solutions. Today, we remain dedicated to an unrivaled level of quality that extends across the lifecycle of the core data center ranging from customized turnkey development, facilities management and data center operations to customized construction needs worldwide! The world’s biggest companies trust T5 with their data center operations. At T5, our success is fueled by our team. With over 400 engineers, technicians and professional staff, we’re proud to foster an inclusive culture of excellence and progression that’s dedicated to serving our customers. • Commitment to Diversity & Military Veterans, • Battle-Tested Leadership Experience, • 100% Data Center Focused, • Owner-Operator MindsetJob Description The Critical Facilities Technician (CFT) is responsible for all aspects of data center operations related to critical and non-critical infrastructure, equipment, and systems. They will participate in an unwavering attitude and commitment to safety and reliability within the Data Center. The CFT will drive continual improvements to the operational excellence of the data center by adhering to company standards and industry best practices. They will have a mindset of ongoing learning and development. Any resource who has not completed Level I training within 30 days of employment, and Level II training within 60 days of employment, will not be allowed to work on shift by themselves without a resource that has completed both Level I and II training. RESPONSIBILITIES • Operate and maintain critical and non-critical data center infrastructure, equipment, and systems, • Work with a team of CFTs to deliver total availability (100% uptime) while minimizing risks, • Monitor power, cooling capacity, and environmental conditions within the data halls, • Utilize a Computerized Maintenance Management System (CMMS) as a tool to manage all planned and unplanned data center work, • Perform preventive maintenance on data center electrical and mechanical equipment, • Assist with the development, revision, and execution of approximately 200 operating procedures and preventive maintenance inspections, and perform quality control reviews to ensure accuracy, clarity, and continual improvement, • Assist with the development of Data Center standards and policies when necessary, • Resolve all electrical and mechanical issues within the Data Center quickly while minimizing risk and properly communicate issues to the appropriate chain of command, • Respond to emergencies and critical issues as necessary and work independently and as a team, according to staffing and situation, towards complete recovery, • Troubleshoot and document technical issues, escalates as appropriate, and ensure issue resolution, • Assist with planning on all corrective issues, • Assist and/or complete physical and logical installations of T5 services, • Maintain accurate facility data including, rounds, PM work orders, change management, etc., • Maintain strict adherence to change control activities, • Manage assigned workflow tasks in order to provide timely turnaround, • Escort and work effectively with outside contractors, ensure they are abiding by critical facility work rules, • Complete facility rounds at the beginning of each shift to ensure data center and grounds upkeep, • Follow T5 data center corporate policies and procedures, • Participate in facility training programs on a regular basis, • Assist in facility operations, as required, • Participate in construction and commissioning, as directed by the CFM, • Work shifts to support 24×7 data center operation, and have flexibility in work hours to cover other shifts, • On call emergency support as required, • Adhere to all federal and local safety laws, • Complete other such duties consistent with your role as you may be assigned by T5FM managementQualifications EDUCATION OR EQUIVALENT EXPERIENCE • High school degree, required, • Prior military or technical school training, preferred, • 1-3+ years’ experience in Mission Critical Environments, • Electrical or mechanical license, preferred Additional Information PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Ability to stand, walk, sit, climb, and balance, • Ability to stoop, kneel, crouch and crawl using both arms and legs, • Ability to pick-up minimum 60 lbs., • Ability to reach with both hands and arms, • Ability to grasp, push, and pull objects, • Ability to smell, talk and hear, • Ability to use hands and arms to reach, handle, feel, and type, • Ability to see at close and distance ranges and the ability to see and correctly distinguish color T5 Data Centers is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionCompany Description Forever On! From the start in 2008, T5 has been focused on supporting enterprise and hyperscale customers with customized data center solutions. Today, we remain dedicated to an unrivaled level of quality that extends across the lifecycle of the core data center ranging from customized turnkey development, facilities management and data center operations to customized construction needs worldwide! The world’s biggest companies trust T5 with their data center operations. At T5, our success is fueled by our team. With over 400 engineers, technicians and professional staff, we’re proud to foster an inclusive culture of excellence and progression that’s dedicated to serving our customers. • Commitment to Diversity & Military Veterans, • Battle-Tested Leadership Experience, • 100% Data Center Focused, • Owner-Operator MindsetJob Description The General Maintenance Technician performs a variety of tasks assigned by the Facilities Operations Manager. These tasks may include assisting with extra workload and various supporting tasks within the Data Center. Non-Critical Infrastructure Preventive Maintenance activities including, but not limited to, the following: • Door hardware repair/replacement, • Painting, • Drywall repair, • Ceiling and Carpet tile replacement, • Vehicle maintenance (Skid steer, forklifts, pallet jacks etc.),, • Installation of various non-critical hardware (Signs, guardrails, shelves, etc), • Material movement, • Roll-up door and dock-lock repairs, • Replenish spill kit materials, • Basic infrastructure repairs, • Performs other related duties as assignedQualifications EDUCATION AND EXPERIENCE • Previous experience preferred., • Strong verbal and written communication skills, • Exceptional time management skills and the ability to prioritize work in a fluid environment, • Embraces a team-based mentality by building positive morale and team spirit, supporting teammates efforts to succeed, and recognizing teammates accomplishments, • Able to function effectively and maintain focus in high-pressure situations, • Has a “can-do” customer service attitude who is conscientious and takes personal pride in their work, • Has high degree of attention to detail and completes tasks on time, • Able to follow instructions, respond to management direction, and volunteer readily when asked, • Able to handle changing needs and priorities accurately and professionally, • Able to read and understand electrical and mechanical manuals, drawings, and sketches, • Able to work proficiently and safely with hand tools and power tools Additional Information PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Ability to stand, walk, sit, climb, and balance, • Ability to stoop, kneel, crouch and crawl using both arms and legs, • Ability to pick-up minimum 60 lbs., • Ability to reach with both hands and arms, • Ability to grasp, push, and pull objects, • Ability to smell, talk and hear, • Ability to use hands and arms to reach, handle, feel, and type, • Ability to see at close and distance ranges and the ability to see and correctly distinguish color T5 Data Centers is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description The General Maintenance Technician II performs maintenance service and repairs in the areas of plumbing, drywall, texture, tile, carpentry, painting, electrical, cabinetry, laminates, granite, and appliance servicing at a skilled level. This position is knowledgeable in the procedures and safety measures associated with industry and company standards. The role requires at least 1 year of experience in the field or in related areas. This technician is familiar with a variety of these fields’ concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks, and a wide degree of creativity and latitude is expected. Work in a team environment to do repairs and prepare guest villas. Handle in-house repairs in areas that might include ceramic tiles, painting, repair and replacement of wallboard systems, carpentry, plumbing, cabinetry, laminates, and other related fields. Must have a working knowledge of hand and power tools required to accomplish all phases of projects. Weekends & Holidays Required Must Have Availability Between 9am-11pm Monday to Sunday COMPANY BENEFITS • Bi-Weekly Pay, • Comprehensive Benefits: Medical, Dental, Vision & Prescription, • Other Elective Coverages: Pet Insurance, Short & Long Term Disability, AD&D, Hospital Indemnity, Critical Illness, Accident Injury, Life Insurance, • HSA/FSA, • EAP - Employee Assistance Program (Free Mental Health, Financial & Legal Counseling), • 401K with Company Match, • PTO, • Heavily Discounted Hospitality Stays & the Company Perks Website, • Tuition Assistance, • Company Appreciation Platforms & Innovation Contests, • Growth Opportunities & Stability, • Handle in-house repairs regarding the removal and replacement of ceramic tiles, painting, repair or replacement of wallboard systems, painting, texturing, and maintain a working knowledge of basic plumbing and mechanical systems., • Assists guests and staff in the resolution of unit maintenance concerns, complaints, and questions., • Utilize specific hand and power tools required to accomplish all phases of projects, from rough-in carpentry to trim cabinetry., • Must be at least 18 years of age., • Must have the ability to perform skilled work in finish/trim-out construction., • Specializations in drywall finishing, flooring, and laminate repair., • Must have high-quality skills in painting, tile repair, plumbing, and electrical., • Must have working knowledge of hand and power tools and mechanical aptitude., • High school diploma or GED and/or equivalent work experience or vocational training., • At least two years of field experience required. Trade school is a plus., • Maintenance with a resort and/or hotel preferred., • Bilingual is a plus. At Holiday Inn Club Vacations, we believe in strengthening families. And we look for people who exhibit the courage, caring, and creativity to help us become the most loved brand in family travel. We’re committed to growing our people, memberships, resorts, and guest love. That’s why we need individuals who are passionate in life and bring those qualities to work every day. Do you instill confidence, trust, and respect in those around you? Do you encourage success and build relationships? If so, we’re looking for you.

Job Description The General Maintenance Technician I performs basic services and repairs in the areas of plumbing, carpentry, painting, electrical, interior finishes, and appliance servicing. This position will be responsible for daily cleanup throughout the entire property regarding groundskeeping. Must be able to identify basic maintenance defects for repair. This position will also require working as part of a team and carrying out tasks as assigned by the leader. Weekends & Holidays Required COMPANY BENEFITS • Bi-Weekly Pay, • Comprehensive Benefits: Medical, Dental, Vision & Prescription, • Other Elective Coverages: Pet Insurance, Short & Long Term Disability, AD&D, Hospital Indemnity, Critical Illness, Accident Injury, Life Insurance, • HSA/FSA, • EAP - Employee Assistance Program (Free Mental Health, Financial & Legal Counseling), • 401K with Company Match, • PTO, • Heavily Discounted Hospitality Stays & the Company Perks Website, • Tuition Assistance, • Company Appreciation Platforms & Innovation Contests, • Growth Opportunities & Stability, • Works in a team environment in a primarily response role to complete inspections, repairs, preparation of guest units, and at times, grounds upkeep. Assist guests and staff in the resolution of unit and facility maintenance concerns, complaints, and questions, • Assist maintenance and housekeeping teams in the preparation of the property for guests, • Perform general maintenance duties and groundskeeping as assigned by the manager or supervisor, • High school diploma or GED, • Groundskeeping or landscaping experience preferred, • A combination of six months of facility and/or building/construction maintenance experience and/or vocational training is preferred, • Have the ability to perform skilled work in basic general maintenance and groundskeeping, • Ability to learn skills in painting, tile, plumbing, carpentry, and electrical, • Must be able to problem-solve and participate in troubleshooting major appliances, • Must know hand and power tools, and have a mechanical aptitude, • Must be able to provide excellent face-to-face guest communication, • Must be able to follow written instructions and complete documentation associated with unit maintenance, • Must have basic problem-solving skills At Holiday Inn Club Vacations, we believe in strengthening families. And we look for people who exhibit the courage, caring, and creativity to help us become the most loved brand in family travel. We’re committed to growing our people, memberships, resorts, and guest love. That’s why we need individuals who are passionate in life and bring those qualities to work every day. Do you instill confidence, trust, and respect in those around you? Do you encourage success and build relationships? If so, we’re looking for you.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Phoenix, AZ. These are mainly first shift opportunities with a pay rate dependent on experience & skill level. If you are a Maintenance Technician and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope (can include any or all of the following): • Perform Preventative & Corrective Maintenance on Machinery & Equipment, • Maintain Equipment & Facility to Ensure Maximum Reliability, • Electrical, Hydraulic & Pneumatic Maintenance, • Troubleshoot, Diagnose and Develop Solutions for Issues with Equipment, • Tech Maintenance, • Work on Business Unit Facilities, Equipment, Tooling, etc., • Repair work, • Some Welding, • General Building Maintenance, HVAC & Plumbing Repairs, • Able to Read and Understand Blueprints & Schematics, • Tools of the Trade, • Proper PPE must be worn, • Safety Oriented, • Prior Construction Experience Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Summary: An Apartment Maintenance Technician is responsible for performing general maintenance and repair tasks in residential apartment complexes. This position ensures that the property is well-maintained, safe, and fully operational for residents. The job typically involves both routine and emergency maintenance duties, with a focus on customer service and timely issue resolution. Key Responsibilities: * General Maintenance: * Perform routine inspections of buildings and equipment. * Conduct repairs to plumbing, electrical systems, HVAC units, and appliances. * Address minor carpentry and drywall repair needs. * Maintain outdoor areas, including landscaping, lighting, and drainage systems. * Sweep, rake, and remove litter from parking lots, walkways, and common areas. * Clean outdoor amenities, such as pools, picnic areas, and playgrounds, ensuring they are safe and well-maintained. * Empty trash cans and remove trash from common areas, disposing of it properly. * Ensure that entrances, stairways, sidewalks, and parking areas are free of debris and hazards. * Report any outdoor maintenance issues, such as damaged fences, broken lights, or irrigation problems, to the appropriate team or manager. * Assist with the repair of outdoor structures, such as fences, gates, and outdoor lighting. * Ensure that all outdoor areas are safe for residents, addressing potential hazards like fallen branches, debris, or uneven walkways. * Comply with safety regulations and company policies regarding the use of equipment and handling chemicals. * Communicate regularly with property management to inform them of grounds conditions, needs for repairs, or any issues that arise. * Maintain a log of tasks completed and report any unusual situations or safety concerns. * Troubleshooting and Repairs: * Respond to maintenance requests and emergencies from tenants. * Diagnose issues with equipment and systems and perform necessary repairs. * Replace or repair faulty components such as switches, outlets, plumbing fixtures, and HVAC parts. * Preventative Maintenance: * Perform routine preventative maintenance on equipment to avoid future breakdowns. * Lubricate and clean machinery, check for wear, and perform tests on systems. * Unit Preparation: * Ensure that all appliances are in working order, including dishwashers, refrigerators, stoves, and air conditioning units. * Perform minor repairs such as patching holes in walls, replacing light bulbs, fixing plumbing issues, and ensuring that all fixtures are in place. * Repair or replace damaged flooring, drywall, and other structural elements as needed. * Prepare and paint interior walls, doors, and trim to ensure the unit is visually appealing. * Touch up areas that show wear or damage from previous tenants. * Inspect HVAC, plumbing, electrical, and other essential systems to ensure they are functioning properly. * Test smoke detectors, appliances, plumbing fixtures, and other utilities. * Replace filters, light bulbs, and batteries as necessary. * Ensure that the unit complies with safety regulations, including proper working locks on doors and windows, safety railings, and functional smoke detectors. * Report any major issues that may require professional repair services. * Work efficiently to ensure apartments are ready for new tenants according to the scheduled timeline. * Coordinate with the property management team to prioritize which units need immediate attention. * Remove and dispose of any leftover debris, trash, or unwanted items left by previous tenants. * Ensure that the unit is free from any remnants of the prior occupancy. * Customer Service: * Interact with tenants professionally, addressing their concerns and maintenance requests. * Record Keeping: * Maintain records of work performed, materials used, and time spent on each task. * Assist with inventory management for maintenance supplies. Qualifications: * High school diploma or equivalent; additional technical training or certifications are a plus. * Previous experience in maintenance or construction, preferably in a multi-family setting. * Knowledge of electrical, plumbing, and HVAC systems. * Strong problem-solving skills and attention to detail. * Ability to lift and carry heavy objects and work in various weather conditions. * Good communication and customer service skills. Physical Requirements: * Ability to perform physical tasks, such as lifting heavy objects and working in tight spaces. * Must be able to work on a flexible schedule, including emergency after-hours shifts when needed. * Must be able to lift heavy items. * Repetitive bending, kneeling, and lifting of up to 50 pounds. * Standing and walking for long periods. * Ability to work with tools and machinery for extended periods, including push mowers and leaf blowers. Compensation: * Competitive salary with commission opportunities. * Health benefits, 401(k), and other company perks.

Job Description Wedgewood Weddings is hiring to expand our team of skilled Maintenance Technicians to undertake the responsibility to preserve the good condition and functionality of our event venues/buildings and common grounds. A Wedgewood Weddings Maintenance Technician is a thorough professional with a practical mind and attention to detail. The ideal candidate will be able to work independently and responsibly by observing all health and safety guidelines. The Maintenance Technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. Responsibilities: • Ensure all areas of the facility are in maintained in good working order., • Ensure that trash is removed from the facility and grounds., • Perform major and minor repairs around the facility under direction from the General Manager., • General knowledge in construction and hands on experience with plumbing, framing, drywall, electrical, painting, refrigeration, and landscaping., • Assemble furniture or equipment based on business needs., • Ensure the safety of guests and employees., • Perform any additional duties as assigned by the General Manager, Regional Manager or Director of Facilities., • Understand and adhere to environmental standards., • A minimum of 5 years’ experience in facility Maintenance or Construction., • Qualified candidates will have experience in: Drywall Repair, Painting, Carpentry, Tile, Masonry, Plumbing and Electrical., • Extensive working knowledge in one or more construction trades, with good working knowledge in others., • Attention to details & quality driven., • Ability to work as a team player., • Must be able to complete tasks effectively, accurately & in a timely manner., • Ability to prioritize work in order of importance., • Ability to work in high and low temperatures., • Must be able to lift 75 lbs. regularly., • Availability to respond to occasional emergencies on the weekends. Wedgewood Weddings provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description ☀️ Job Opening: Sunscreen Sales & Installation Technician Location: Scottsdale and Greater Phoenix Area Company: Family-Owned Business (Serving Arizona for 50+ Years) ️ About the Role: We’re on the hunt for a proactive, energetic go-getter to become part of our reliable team. In this dynamic hybrid role, you’ll engage directly with customers, drive sales, and support hands-on installations—bringing custom sunscreen solutions to Arizona homeowners who want to stay cool and protected. If you enjoy working with people, solving problems, and making a visible impact, this could be the perfect fit. Responsibilities: • Conduct in-home consultations and sales presentations, • Install sunscreen products using ladders, drills, and hand tools, • Maintain a professional and friendly demeanor with clients, • Safely operate company vehicle to job sites across the Valley, • Prior sales experience (home improvement or construction a plus), • Comfortable climbing ladders and handling power tools, • Clean driving record, • Must be at least 25 years old (insurance requirement), • Strong communication and customer service skills, • Company vehicle provided for work-related travel once training is complete, • Paid training and support from experienced team members, • Opportunity to grow with a respected, family-run business, • Positive work environment with loyal customer base Company DescriptionArizona Sun Screen has been in business for over 50 years. We are family owned and operated. We are licensed, bonded and insured. We care very much to provide good customer service and quality work. We have developed a good reputation and a large customer base throughout the years of service. All employees are expected to represent the company with the same high standards.Arizona Sun Screen has been in business for over 50 years. We are family owned and operated. We are licensed, bonded and insured. We care very much to provide good customer service and quality work. We have developed a good reputation and a large customer base throughout the years of service. All employees are expected to represent the company with the same high standards.

Job Description Welcome to Air Comm, where innovation meets communication! Since 1973, we've been on a mission to revolutionize wireless solutions for clients worldwide. We tailor our services to fit the unique needs of every industry, big or small. We specialize in integrated technologies from cell phone integration, dispatch consoles, intelligent surveillance cameras and more to find the right solution for our customers. With a knack for creativity and a passion for problem-solving, we're not just your average communications provider—we're your trusted partner in navigating the ever-changing landscape of connectivity. Join us as we continue to soar to new heights, making waves in the world of two-way radios. Location Tempe, AZ Employment Type Full-Time, Regular, Non-Exempt Manager Position No Reports To Regional Service Manager or designee Travel 25% Revision Date August 2025 Job Description Seeking a mobile installer that can install electronics into vehicles - A background in GPS, Stereos, Radio, Lights, etc! The Install Tech will assist with the customer installation of radio and wireless communications systems in customer’s vehicles and on-site. Successful candidates will be motivated, customer service oriented and professional in appearance. Applicant should have experience with the following: • Audio Systems, • Mobile Video Systems, • Remote Starters, • Security Systems, • Navigation Systems, • Subwoofers, • Car Speakers, • Marine Electronics and Speakers, • Bluetooth, • Radar, • Motorcycles, • I-pod Integration, • Strobes - LED - HID Lighting, • An ideal candidate will have a minimum of 2+ years of experience with 12 volt automotive systems., • Installation of vehicle lighting, controls, sirens, cameras, electronic locks, and other similar technologies., • Dismantle the interior and exterior of new vehicles (seats, carpeting, flooring, dash and interior panels, headliners, lights to prepare vehicle for installation of new systems., • Install radio communications systems, antennas and GPS equipment into vehicles or mobile command centers., • Vehicle repairs on systems as well as retrofitting and upgrading to refresh existing fleets., • Maintains positive customer relations., • Trains junior installers as needed. Work Environment The job environment may vary, but commonly associated outdoors at construction sites, mine sites, hotels, and hospitals. The following environmental/atmospheric working conditions are commonly, but not always, associated with the performance of this position. The actual working conditions will vary. • Job Site environment, including, but not limited to, machines, tools, heavy equipment, chemicals, solvents, dust and fumes., • Occasional exposure to extreme weather conditions., • Uneven ground. Perks and Benefits Air Comm offers a comprehensive benefits package including medical, dental, vision, a retirement plan, AD&D Insurance options, and more. We also reward our employees’ hard work with bonuses, paid time off, and paid holidays. As an added bonus, we also offer a brand-new facility with a gym and fully stocked coffee bar. The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees. It is the policy of Air Comm to fill every position without regard to race, color, religious creed, sex, marital status, physical disability, mental disability, medical condition, age 40 and over, national origin, ancestry, sexual orientation, gender identity, genetic information, military or veteran status, or any other basis made unlawful by applicable law. Air Comm is an equal opportunity employer, and strictly prohibits unlawful discrimination by any employee, including managers, supervisors and co-workers. Include shift schedule

Job Description Overview Tradesmen International is immediately hiring experienced Concrete Coring Operators for projects located in the Scottsdale, AZ area. This is a full time opportunity and the pay rate is $25-30/hour based on experience and skill level. If you are a Concrete Laborer and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career! Job Scope: • Utilize specialized equipment such as core drills, diamond-tipped bits and saws to cut precise holes and openings in concrete structures according to project specifications, • Adhere to all safety protocols and guidelines to maintain a safe work environment, • Implement proper safety measures during coring and drilling activities, • Perform routine maintenance on coring equipment to ensure it operates efficiently and safely, • Ensure the quality of core samples and openings meets project requirements and industry standards, • Conduct inspections to verify the accuracy and cleanliness of coring work, • Collaborate effectively with project managers, construction teams and other technicians to coordinate coring activities with overall project time-lines and goals, • Troubleshoot and resolve issues that may arise during coring operations such as equipment malfunctions or unexpected challenges in the concrete structure Responsibilities • Must pass drug screen and background check, • Proven experience as a Concrete Coring Technician or similar role in the construction industry, • Knowledge of concrete cutting coring and drilling techniques. Familiarity with safety procedures and equipment used in concrete coring, • Ability to read and interpret construction plans and specifications, • Strong attention to detail and precision in executing tasks, • Physical stamina and the ability to lift heavy equipment and materials, • Excellent communication and teamwork skills, • Valid drivers license and reliable transportation Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job Description About Rocky Mountain Restoration We offer help to those in crisis and we are committed to creating raving fans on every job. Every day we help people recover from disasters such as flooding and water damage. Our team responds and helps to restore the lives of our customers by offering professional, caring, and fast restoration and cleanup services. Here at Rocky Mountain Restoration, we take care of each other first and foremost. We work hard, but we play hard too, with an annual company party, quarterly social events, and so much more. If you’re looking for a company with growth opportunities, positive and supportive management, and a deeply fulfilling, financially rewarding, career, you’re in the right place. Rocky Mountain Restoration believes in investing in our team members. When you join our team you will receive personal and professional growth opportunities. We know that we are only as good as our team. Our premise is to follow the following Core Values to ensure the success of our Team: • Be Humble, • Care About Others, • Get it Done, • Always Learn and Grow, • Be Positive and Fun We are proud to offer the following benefits to all full-time employees: Benefits: Medical, Vision, Dental, Life Insurance Coverage options Company Paid: Employee Medical Coverage, Short term and Long term Disability, and Life Insurance Work Cell Phone provided 10 days PTO your first year, and 15 days PTO (after 2 years) 7 Paid Holidays (after 90 days) Competitive, matching 401(K) A fully stocked kitchen with lots of goodies to keep you fueled and hydrated throughout the day Ongoing training and development from our experienced management team and outside-trusted advisors. Job Description We are seeking a skilled and motivated Finish Carpenter Restoration Technician to join our restoration team. In this role, you will be responsible for the reconstruction and restoration of structures following water, fire, smoke, or storm damage. The ideal candidate will have a strong background in construction, be detail-oriented, and have the ability to execute repairs and rebuilds to ensure properties are restored to their pre-damage condition. Required Qualifications: • Positive and fun attitude, • 2+ years of experience in construction, home remodeling, or restoration., • Owns general tools and equipment to complete restoration projects. *Specialty tools not required., • Strong understanding of construction methods, tools, and materials., • Proficient in matching different types of drywall texture., • Familiarity with plumbing, electrical, and HVAC systems is a plus, but not required., • Strong attention to detail and quality control., • Strong problem-solving skills and the ability to work independently or as part of a team., • Able to perform physical labor and able to lift 100 lbs, • Able to perform bend, kneel, reaching, crawling, stoop, climb, stand for extended periods of time, and any other physical requirements to perform the job, • Must be able to read and write fluently in English, • Must have reliable personal vehicle., • Must be 21 years of age must be willing to undergo background check and drug screen Responsibilities: • Perform all aspects of construction put-back, including framing, drywall installation, trim carpentry, and cabinet installation., • Complete painting, trim work, and installation of baseboards and moldings to restore the property., • Work closely with the project manager to understand the project scope, timeline, and specifications., • Provide exceptional customer service and communicate effectively., • Ensure that all work is completed in accordance with local building codes and safety regulations. Compensation for Full-time Employees: Pay Rate: $25.00 - $30.00/hour Pay may depend on skills and/or qualifications Piece Work Profit Bonus available at the Project Manager’s discretion Medical/Dental/Vision, 401K, PTO and Paid Holidays Job Type: Full-time REASONABLE ACCOMMODATIONS STATEMENT: To perform this job successfully, an individual must be able to perform each essential function satisfactorily and be able to meet the work environment conditions and physical requirements of the job. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.

Job Description Leapros Skilled Trades is actively hiring Data Center Superintendents (100% Travel) in Tempe, AZ. As a trusted partner in the construction industry, we connect top talent with top companies across the United States. Job Type: Contract to Hire Pay: $35 - $40 Per Hour BOE Responsibilities: • The Superintendent will recruit, hire, train, manage, supervise, promote, discipline and discharge, if necessary, all project related staff., • Effectively manage all human resource issues per Company policies and procedures. Complete recommendations for project related employees’ performance ratings, promotions and pay changes. Provide guidance and mentoring to meet all customer and Company goals and objectives., • The Superintendent acts as the senior Company liaison for operational interface with customer representative(s)., • The Superintendent will plan for, manage, monitor and maintain project profitability to achieve Company goals., • The Superintendent will ensure that deadlines are met per customer requirements., • The Superintendent will manage overall workload distribution, staffing levels and monitor the customer delivery and job installation progress., • The Superintendent manages successful job completion; ensure productivity, job completion and compliance to project budget., • The Superintendent will review all job cost postings for accuracy and completeness, including but not limited to, the preparation of invoices, customer collections and periodic financial reporting to the customer and management., • The Superintendent will fully complete project paperwork accurately and on time (specifically timesheets, material transfers, work orders, change orders, tool transfers and others as required); ensure all Job Closing Packages meet customer and Company standards., • The Superintendent will perform quality checks; manage the prevention of outages; conduct day to day job walks to ensure quality; prepare red-lined as-built drawings., • The Superintendent serves as main on-site customer contact for questions and/or concerns; attend facility and constructions meetings when required., • The Superintendent will perform work consistently demonstrating a detailed level of technical knowledge; troubleshoot and resolve technical issues as they arise., • The Superintendent will develop, redesign and implement process improvements as required to bring processes up to effective levels., • The Superintendent will be in concert with the Training Department, monitor all quality and safety issues related to the operations department. Actively promote safety as our first priority., • The Superintendent will lead any assigned operations meetings and training sessions., • The Superintendent will also manage tools and truck inventory/maintenance., • Prefer a minimum of three (3) years’ experience of supervisory or managerial experience., • The Superintendent must have a minimum of three (3) years’ experience as a Lead Communications Technician or similar position., • The Superintendent must also have a minimum of five (5) years’ experience in telecommunications or a related technical or construction field., • Must be proficient with a computer and be skilled with Microsoft Office (Word, Excel and MS Project)., • Must meet Company minimum driving standards., • The Superintendent Must have demonstrated verifiable ability to define a project, create a project scope of work, create an estimate, develop detailed associated tasks and manage these to final completion and customer turnover., • Regular attendance is mandatory, • The Superintendent must be self-motivated, positive in approach, and convey an appropriate professional image., • The Superintendent must promote the Company culture and mission to all employees, vendors, clients and business partners., • The Superintendent must possess proven problem-solving skills, critical thinking skills and the ability to effectively read, write and give oral presentation(s)., • The Superintendent must also have excellent organizational skills and the ability to develop branch and job processes and best practices., • The Superintendent must have proven high skill level to interpret blueprints and other project documents, including but not limited to, specifications, reporting and quality requirements., • The Superintendent must be able to travel within the branch territory and/or regional territory as needed., • The Superintendent must possess the ability to learn and teach the Company and customer project management systems., • The Superintendent must be able to work at heights, off of a ladder and in confined spaces, lift up to 50 pounds and move up to 75 pounds. Benefits Summary • We offer a comprehensive benefits package that includes:, • Medical, dental, and vision insurance, • Paid Sick Time, • Employee assistance programs (EAP)

Job Description Termite Lead Technician About the job: Physical ability to perform termite treatment services year round, including in the AZ summer heat. Work a hammer drill, trench, patch small holes in cement etc. Have an eye for termite activity and other conditions conducive to infestation. Certified by ADA Pest Management Division in Category 2a - Wood Destroying Insect Treatment and Inspection. About You: * You thrive in a team setting and are motivated by reaching goals. * You enjoy having clear expectations and you embrace the process of professional and personal growth. * You are never content and do not settle for the bare minimum. * You are a leader with a serving mindset who takes pride in a team first mentality. * You need to have a purpose in what you are doing. * You are dependable and show up for your team. About Us: ScorpionTech now CAPE is an established pest control company that has been servicing the greater Phoenix area for over 15 years. We are committed to providing our customers with premier pest control products and services. We are currently looking for an experienced and proven termite technician who is motivated by earning potential, enthusiastically embraces a growth mindset, and is dedicated to service. Our Purpose and Core Values: "Creating a Protected Environment. Building a Better Life" * We value each team member and customer. * We show up. * We drive growth. * We follow effective protocols. * We deliver results. About the Role: We play to win! In this role you will be responsible for completing residential and commercial termite pre-construction, post-construction, corrective and preventative treatments. You will also complete annual warranty renewal inspections. Experience is mandatory and a minimum of 1 (one) year of consistent termite experience is required. You must already be certified in Arizona and hold a current Category A2 termite certification to be eligible for this position. Experience in preventative and corrective treatment procedures is also mandatory. A growth mindset is also necessary to be successful in this role. We are constantly learning, constantly growing, and always looking for opportunities to build better the lives of our customers and team members. With quarterly themes aimed at keeping you engaged and motivated you have the opportunity to earn extra money weekly for reaching set goals. When you win, we win! Come be a part of a team that lives its core values and cultivates a culture of excellence. Criteria for Success: * Embrace and live CAPE's Core Values and help cultivate a culture of success. * Complete treatments on time and to the level of CAPE Pest Control standards. We will not take shortcuts. * Problem solve and provide excellent customer service to drive 5 star reviews. * Mitigate re-services by taking time to service homes correctly the first time. * Help keep chemical cost done by ensuring mix ratios are correct. * Maintain all company equipment. Job Type: Full-time Salary: $19.00 - $24.00 per hour Schedule: * 10 hour shift * 8 hour shift Supplemental pay types: * Commission pay * Signing bonus Ability to commute/relocate: * Mesa, AZ 85210: Reliably commute or planning to relocate before starting work (Required) License/Certification: * Driver's License (Required) Work Location: In person Company DescriptionFamily owned and operated service company for over 15 years where you are valued.Family owned and operated service company for over 15 years where you are valued.

Job Description Why DH Pace? DH Pace Company is a distribution, construction and service organization offering a complete range of door and door related products and commercial security products. The company is privately owned and has been in operation over 95 years! We have 50+ US offices in 24 states with 2024 company-wide sales over $1 billion. Our mission is to enhance the communities we serve by improving the safety, convenience, and aesthetics of the buildings where we live, work, and play. Our foundation of values represents who we are and what we stand for. Values are never situational or circumstantial, they are always and forever. Our core values are R.I.S.E. Respect, Integrity, Service, and Excellence. DH Pace Company, Inc. is hiring an Integrated Security Solutions Technician in Tempe, AZ. We are considering experienced applicants only. In this position, you will be responsible for the service of Commercial Integrated Security Systems such as Electronic Access Control Systems, CCTV/Video Monitoring and Intrusion Alarm Systems. Be part of a company that values safety, teamwork, and professional growth. If you're ready to make a difference in the security industry, apply today! Job Responsibilities: • Service systems including Access Control, CCTV, Intrusion Detection, Intercom, Emergency Phone, and Parking Revenue Systems and more., • Collaborate with customers, vendors, and subcontractors to ensure successful installations., • Provide customer training and handle on-site assessments for service needs., • Promote business opportunities for service contracts and maintain product knowledge., • Keep a clean, safe work environment and manage job documentation efficiently., • Maintain inventory on truck and have knowledge and understanding of all parts, part numbers and part descriptions., • Minimum of 2 years in video surveillance and camera systems preferred, • High School Diploma or GED preferred, • Valid Driver's License and good driving record required, • Strong troubleshooting skills, • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, and drug screen required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description SUNLAND ASPHALT Is the road to your future under construction? Come join our Award Winning Team! Sunland Asphalt & Construction, Inc. strives to recruit top talent and we are committed to help you grow both professionally and personally. We are confident you will find our Company a dynamic and rewarding place in which to work because here at Sunland Asphalt our vision is: 'To be the best place in the world to work.' Sunland Asphalt offers employees: • Competitive Weekly Pay and Paid Time Off, • 401(K) and Employee Stock Ownership (ESOP), • Tuition Reimbursement, • Work/Life Balance and Community Involvement, • Comprehensive Health Benefits including; Health, Dental, Vision, • Life/Disability Insurances, • Award Winning Peers & Projects, • And A Foundation Built on Safety POSITION PURPOSE The Take-off Technician works directly under the supervision of the Lead Tech. The Take-off Technician is a foundational part of the Sales process and works closely with the Estimators to perform quantity take-offs to support the cost estimation process. ESSENTIAL DUTIES AND RESPONSIBILITIES • Employee shall perform all duties and responsibilities with Sunland's Core Values at the forefront., • Must be an advocate of safety and follow safety policies and procedures., • Models project job sites using custom design process., • Assists in design challenges on commercial pre-construction job sites., • Transfers plans from hard copy to software programs., • Finalizes project takeoffs for Sunland Asphalt Estimators, Project Managers, and customer use., • Performs plan take-offs and related duties., • Any, and all other duties assigned. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. SUPERVISORY RESPONSIBLITIES • This position has no supervisory responsibilities. COMPETENCIES • Collaboration Skills, Communication Proficiency and Customer Focus., • Problem Solving and Thoroughness., • Project Management and Time Management. COMPETENCIES • C ustomer Focus - Customer Orientation, • O wnership - Results Driven, Performance, Time and Stress Management and Composure, • R elationships - Teamwork Orientation, Diversity, and Inclusion, • E thics - Honesty, Integrity, Do the Right Thing, • This is not considered a safety-sensitive position., • All employees must wear the appropriate personal protective equipment (PPE) when required., • Serves as a safety ambassador by complying with federal, state, and local laws, as well as Company safety policy, enforces safe work practices, and proactively identifies and remedies worksite hazards. PHYSICAL DEMANDS AND WORK ENVIRONMENT Office • This position operates in a professional office environment that routinely uses standard office equipment requiring the ability to communicate in person and over the telephone with other employees, the ability to interpret printed materials and a computer screen, the stamina to maintain attention to detail despite interruptions, the ability to lift and carry supplies and files weighing up to 10 pounds and to move about the inside of the office to access supplies, office machinery, etc., • May be required to work on a project site and if so, would be exposed to all weather, including extreme hot and cold temperatures., • Employee might be exposed to various chemicals, vapors, pollutants, virus or other air-borne pathogens, gases, uneven surfaces, loud noises, moving vehicles or machines and dust/debris. POSITION TYPE/ EXPECTED HOURS • This is a full-time position. Occasional overtime may be required as job duties demand. TRAVEL • No travel required. MINIMUM QUALIFICATIONS Education and Work Experience • A high school diploma or GED is required., • Must be able to understand blueprints, project scopes, and other job-site related material., • Intermediate to advanced computer skills, desired., • Knowledge of Microsoft Office Suite of products and .html-based document navigation, • Attention to detail., • Strong problem-solving skills., • A valid driver's license and a clean motor-vehicle record preferred. Sunland Asphalt is an EEO/Affirmative Action Employer DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. The roles and objectives of this job do not include setting corporate policy and does not constitute a managing agent of the company. Sunland Asphalt, LLC. is an equal opportunity employer. We evaluate applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. Sunland Asphalt is committed to working with and providing reasonable accommodation to individuals with disabilities. If because of a medical condition or disability you need a reasonable accommodation for any part of the employment process, please email and let us know the nature of your request and your contact information. Job Posted by ApplicantPro

Job Description The Field Service Technician II plays a crucial role in troubleshooting, maintaining, and repairing low voltage systems, including network infrastructure, surveillance cameras, servers, NVRs, access control hardware and software, and audio-visual systems. Reporting directly to the Service Manager, this position requires a highly motivated self-starter with exceptional technical expertise in low voltage systems and a strong commitment to delivering outstanding customer service. The Field Service Technician II also acts as a mentor and leader for the Field Service Technician I, providing guidance and support to help them develop the skills necessary for advancement. Participation in Premise One's on-call service program is a key component of this role. Key Responsibilities • Safety & Site Preparation: Conduct pre-work site assessments and safety checks to ensure a safe working environment., • Customer Service Excellence: Provide exemplary customer service, consistently maintaining the highest service standards and client satisfaction., • Field Leadership: Lead by example, guiding Field Service Technician I employees to ensure efficient, first-time resolution of service issues., • Project Execution: Implement job plans with a focus on quality assurance and safety compliance, ensuring project completion meets company standards., • Autonomous Field Operations: Operate independently in the field, making informed decisions to resolve technical issues on-site., • Technical Troubleshooting: Diagnose, service, and repair low voltage systems in commercial and enterprise environments, ensuring all repairs adhere to company and industry standards., • Testing & Documentation: Test all repairs on-site in alignment with Service Operations and Engineering policies. Accurately document all work performed, including notes, photos, and communications, in online ticketing systems and timecards., • On-Call Rotation: Participate in the on-call rotation, providing emergency after-hours service as required., • Vehicle Maintenance: Maintain the company-issued vehicle in accordance with company standards, ensuring it is always in optimal condition., • Professional Conduct: Maintain a professional appearance and demeanor at all times, representing the company positively in all interactions., • Continuous Improvement: Provide feedback and suggestions to the Field Superintendent or Service Manager to enhance service delivery and field operations., • Communication: Proactively communicate scheduling issues and other concerns to the Field Superintendent, Service Manager, and dispatchers., • Experience: 5+ years of experience in Audio Visual, Security, Intercom/Paging, and Infrastructure Cabling., • Technical Knowledge: Strong understanding of programming, technical commissioning guidelines, and troubleshooting philosophies., • Industry Expertise: Familiarity with industry-standard tools, equipment, and test devices, such as Fluke testers, meters, and OTDR., • Security Background: Preferred candidates will have a robust background in physical security systems., • Genetec, • Software House, • Lenel, • Feenics, • Milestone, • Avigilon, • Flexibility: Willingness to work overtime as needed to meet construction and service schedules., • On-Call Capability: Ability to support 24/7 client SLAs and respond to emergencies when required., • Travel: Willingness to travel at least 60% of the time within the designated service market, with occasional out-of-town travel up to 20%., • Technical Proficiency: Competent in using computers and industry-specific software., • Physical Requirements: Ability to handle physical workloads, including lifting and carrying up to 50 lbs, and the ability to walk, sit, and stand for extended periods. Powered by JazzHR iolvSfpRP3

Job DescriptionBenefits: • Flexible schedule, • Opportunity for advancement House Doctors of Scottsdale is seeking an Apprentice / Jr. Handyman to join our team on a flexible, 1099 basis. This role is ideal for someone with 2+ years of experience who can perform basic handyman tasks and is eager to learn from more experienced technicians. As a 1099 independent contractor, youll have flexibility in your schedule while gaining valuable, hands-on training with the opportunity to grow into a full technician role. Key Responsibilities • Complete basic handyman services under supervision (light carpentry, drywall patching, painting, caulking, fixture installation, minor repairs)., • Assist experienced handymen on larger jobs preparing work areas, carrying tools, clean-up, and finishing touches., • Maintain a professional appearance and excellent customer service when on-site with clients., • Keep job sites and tools organized and clean., • Track your time and job details accurately., • Follow safety protocols and company quality standards. Qualifications • 2+ years of handyman, construction, or trade experience preferred., • Basic knowledge of tools, home repair methods, and safe work practices., • Willingness to learn and take direction., • Must provide reliable transportation., • Ability to lift up to 100 lbs. and perform physical labor., • Strong communication and customer service skills., • Must carry or be willing to obtain general liability insurance (1099 requirement). Contractor Details • 1099 Independent Contractor: You are responsible for your own taxes, insurance, and benefits., • Flexible Scheduling: Work assignments are based on availability and workload., • Growth Opportunity: Potential to move into a higher-level technician role with increased pay and responsibility., • Tools & Equipment: Basic hand tools required; House Doctors may provide access to specialized equipment as needed. Why Join House Doctors? • Gain valuable training and mentorship from experienced handymen., • Build your skills across carpentry, drywall, painting, electrical, and plumbing., • Flexible hours that fit your schedule., • Clear pathway for growth within the House Doctors system.

Job Description Why DH Pace? DH Pace Company is a distribution, construction and service organization offering a complete range of door and door related products and commercial security products. The company is privately owned and has been in operation over 95 years! We have 50+ US offices in 24 states with 2024 company-wide sales over $1 billion. Our mission is to enhance the communities we serve by improving the safety, convenience, and aesthetics of the buildings where we live, work, and play. Our foundation of values represents who we are and what we stand for. Values are never situational or circumstantial, they are always and forever. Our core values are R.I.S.E. Respect, Integrity, Service, and Excellence. DH Pace Company, Inc., in Tempe, AZ, aspires to hire Commercial Door Technicians. Must be able to safely lift 100lbs. overhead. Valid Driver's License required with a good driving record. If you have experience working with commercial doors including roll-up doors, high-speed doors, door hardware, dock equipment, dock levelers, or any similarly skilled trades in the commercial construction industry, please apply! Job Responsibilities • Service a wide range of commercial door and door hardware, • Identify opportunities to provide customers with products and services, • Track and maintain job related paperwork and submitting in a timely manner, • High School Diploma or equivalent preferred, • Able to safely lift 100 pounds over your head, • Commercial Entry Door Technician or Installation Experience, • Must possess valid driver's license and good driving record, • Enjoy the mental challenge of being able to trouble shoot to solve customer needs Our benefit offerings include: • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, and drug screen required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description Staff Experts, LLC is a highly specialized full-service Staffing & Recruiting Firm. We specialize in staffing in the areas of Engineering, Construction Management, Manufacturing, Information Technology, Aerospace & Defense, Administrative-Accounting-Finance, Call Center Operations, Life Sciences, Healthcare, Skilled Trades and Logistics. Staff Experts, LLC is currently seeking to fill Infrastructure Technician positions. If you are interested, please email us your resume and call 602-666-6500 to schedule an interview appointment. Job Duties: • Set-up, deliver and install personal computers, telephones, networking, and peripheral equipment using established and defined procedures and processes., • Configure, install, troubleshoot, and monitor communications devices, including switches, hubs, wireless devices, MESH networking components, voice system, RF systems and other networking infrastructure (both copper and fiber optic), • Assist in the management of site's servers and process control infrastructure, including site virtual/physical servers and storage devices., • Assist in the execution of projects related to MIS and process infrastructure., • Actively participate in Safety and Environmental programs, ensure MIS policy compliance and site operational goals., • Four (4) years of experience in computer/electronic systems hardware/software troubleshooting, maintenance, and repair AND one (1) Technical Certification in a discipline relevant to the role that the applicant will be filling, OR, • Six (6) years of experience in computer/electronic systems hardware/software troubleshooting, maintenance, and repair, • High School diploma or GED (preferred), • Physical/Virtual server management training (preferred), • RF field experience (preferred), • A+ Certification (preferred), • Network + Certification (preferred), • Microsoft Server related certification (preferred), • Fiber Optic Certified Technician (preferred), • MESH network certification (preferred) Staff Experts, LLC is an Equal Opportunity Employer. Contact Information: Staff Experts, LLC (Phoenix Branch) 7776 S. Pointe Parkway West, Suite 148 Phoenix, AZ 85044 602-666-6500 Office 602-391-2369 Fax