Construction technician jobs in Cicero, New YorkCreate job alerts

Job Description Do you love cars and want to make a difference in your community? United Radio is Central New York’s premier upfitter of emergency, construction and commercial vehicles. As an Upfit Technician, you will be installing/removing various types of emergency equipment; (lights, land mobile radios, sirens, prisoner partitions, weapon mounts, consoles, controllers, radar equipment, camera/DVR systems, push bumpers, etc.) . Job Requirements: Working knowledge of automobile electronics (12 Volt systems) and proficiency using basic hand and power tools. • Disassembling & reassembling vehicle’s exterior body parts & interior panels, • Properly mounting & securing components to vehicles, • Routing wires and cabling into vehicles, • Splicing wires and/or soldering connections to equipment & components, • Terminating connections on radios, LED lights, sirens, radar components, and electrical components, • Troubleshooting, diagnosing and/or replacing electrical components, • Documenting all work completed on work orders accurately, • Maintaining a clean, organized and safe working area, • Work inside small areas like vehicle trunks, underneath cars, in engine compartments, underneath dashboards., • Must be able to lift, squat, kneel, stoop, bend, lay down, twist, climb, stand, sit, etc., • Assemble small and large items: brackets, partitions, light bars, push bumpers, cargo boxes, vehicle parts, fasteners, wires, loom, clamps, cable ties, etc. using both hands., • Be in overall good physical health and have full motion/use of hands, fingers, arms, legs, feet, shoulders, elbows, neck, etc. to fit into tight spaces and inspect/install wiring and products inside tight compartments, under, in and around the vehicle., • Must be able to work above, in, on and under vehicles. Job Type: Full-time Must be able to pass a criminal background check, drug test and have a clean driver’s record. Our shop is fully climate controlled during the entire year. We hold events like monthly employee breakfasts, lunches and other activities to make the workdays fun. Pay: $21.00 -$35.00 per hour Pay range dependent on experience. Expected hours: 40 per week, Monday through Friday 8:00am-5:00pm Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Health insurance contribution, • Paid time off, • Bonus opportunities, • Employee-focused culture, • Technical and non-technical training, • No required overtime, • On-Job training

Job DescriptionConstruction Laborer – Gas Distribution (Prevailing Wage) About the DDS Companies: The DDS Companies is a reputable and dynamic organization that specializes in providing comprehensive infrastructure construction and engineering solutions. With a commitment to excellence, safety, and customer satisfaction, we consistently deliver successful projects across various industries. Our team of dedicated professionals thrives on innovation and collaboration, ensuring that we exceed client expectations at every stage. Join us and be part of a company that values integrity, teamwork, and continuous growth. Benefits: • Health, Dental, and Vision Plans, • 401K with match, • Paid Time Off (PTO), • Life and AD&D coverage, • Short and Long-Term Disability, • HSA and or FSA Accounts As a Gas Technician, you will play a vital role in various aspects of natural gas infrastructure projects, contributing to the safe and efficient operation of these systems. This position involves working outdoors in diverse weather conditions, ensuring the uninterrupted supply of natural gas to our customers. While previous natural gas construction experience is preferred, we will train those candidates who are eager to learn and grow in this field. We seek both entry level and experienced individuals. Base pay for this position will be dependent on qualifications outlined below as well as the specific county the work is performed in (Prevailing Wage). We are hiring in all locations throughout Western, Central, Southern Tier and the Capital Region of NY. Key Responsibilities: • Safely and efficiently perform a wide range of tasks necessary for the successful execution of natural gas infrastructure related projects., • Collaborate with the team to work on diverse job sites, including public right of ways, private properties, commercial establishments, and residential areas., • Take responsibility for the maintenance, cleanliness, and safe storage of company equipment and materials, ensuring their availability for project execution., • Follow instructions, guidelines, and industry standards meticulously to ensure the highest standards of quality, safety, and accountability., • Ability to pass Operator Qualification Testing for Natural Gas work, demonstrating a solid understanding of safety protocols and operational procedures., • Possession of a valid Driver's License, clean driving record and/or CDL (Commercial Driver's License) preferred, enabling you to contribute to transportation needs efficiently., • Meet or exceed all requirements for Grade Level 1 and, • Minimum of 2 years’ experience with underground utility construction and installation., • Possession of NGA, National Grid, or other recognized gas association 70 and 71 Operator Qualifications.Preferred: Level 1 and 2 • High School Diploma or Vocational training in a closely related field., • OSHA 10 and OSHA 30 Certifications., • Proven mechanical aptitude., • Proficiency in operating backhoes or similar types of equipment as needed., • Willingness to work flexible hours including weekends. DDS is committed to providing equal employment opportunities to all individuals regardless of race, color, religion, gender, national origin, disability status, protected veteran status, or any other characteristic protected by law. Powered by JazzHR Uef8bPAs3z

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary CME is seeking a skilled and detail-oriented Utility Locate and Ground Penetrating Radar (GPR) Technician to join our team. The successful candidate will be responsible for utilizing advanced technology to identify and map underground utilities, ensuring accurate and safe excavation practices. This role requires a strong understanding of utility systems, excellent technical skills, and the ability to work independently and as part of a team, under the supervision of a Licensed Engineer. Responsibilities • Utility Location: Use electromagnetic locating equipment to identify and mark underground utilities including water, sewer, gas, electric, and communication lines., • Ground Penetrating Radar: Operate GPR systems to detect and map subsurface structures, objects, and anomalies. Analyze GPR data to provide accurate reports and interpretations., • Data Interpretation: Review and interpret data from utility locate and GPR systems, creating detailed maps and reports for use in planning and excavation., • Field Surveys: Conduct field surveys and inspections to verify utility locations and assess site conditions., • Documentation: Maintain accurate and detailed records of utility locations, GPR data, and field observations., • Safety Compliance: Adhere to safety protocols and standards to ensure safe working conditions on job sites. Report any potential hazards or safety concerns., • Customer Interaction: Communicate effectively with clients, providing clear explanations of findings and recommendations., • Equipment Maintenance: Perform routine maintenance and calibration of utility locating and GPR equipment to ensure optimal performance., • Education: High school diploma or equivalent, along with technical certification in utility locating and GPR technology. Bachelor’s or associate degree in geology, civil engineering, or a related field is preferred., • Experience: Minimum of 2 years of experience in utility locating, ground penetrating radar, or a related field. Experience in construction or civil engineering is a plus., • Technical Skills: Proficiency in operating utility locating equipment and GPR systems. Ability to analyze and interpret data from these technologies., • Knowledge: Strong understanding of underground utility systems, mapping techniques, and safety regulations., • Physical Requirements: Ability to work in various environmental conditions, including outdoor sites and confined spaces. Must be able to lift and carry equipment as needed., • Communication Skills: Excellent verbal and written communication skills. Ability to convey technical information to non-technical stakeholders., • Attention to Detail: Strong analytical skills and attention to detail in data collection and reporting. Working Conditions • This position involves working outdoors in varying weather conditions and potentially hazardous environments., • May require occasional travel to different job sites. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR 4Rog9eK1LT

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Syracuse, NY. These are mainly first shift opportunities with a pay range of $20-25/hour, dependent on experience & skill level. If you are a Maintenance Technician and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope (can include any or all of the following): • Perform Preventative & Corrective Maintenance on Machinery & Equipment, • Maintain Equipment & Facility to Ensure Maximum Reliability, • Electrical, Hydraulic & Pneumatic Maintenance, • Troubleshoot, Diagnose and Develop Solutions for Issues with Equipment, • Tech Maintenance, • Work on Business Unit Facilities, Equipment, Tooling, etc., • Repair work, • Some Welding, • General Building Maintenance, HVAC & Plumbing Repairs, • Able to Read and Understand Blue Prints & Schematics, • Tools of the Trade, • Proper PPE must be worn, • Safety Oriented, • Prior Construction Experience Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Our SERVPRO Team is seeking an experienced certified HVAC/Air Duct Cleaning Division Manager to join our current Management Team of professionals and leaders. Do you have a desire to start a new opportunity where you can utilize your experience, ideas, and expertise to develop a department's sales growth and technician development? Do you enjoy helping others? We may just have the perfect opportunity for you. • Salary: $30 HR/ Commission opportunities/ Overtime, • Paid Vacation, • Paid Sick Time, • Medical, Dental, Vision Benefits with Employer Contribution, • 401K Retirement Planning with Employer Contribution, • Opportunity for position development and growth Supervision and Management: • Supervise duct cleaning technicians, ensuring they follow company procedures and safety protocols., • Plan and schedule duct cleaning jobs, ensuring efficient use of resources and timely completion of projects., • Train and mentor new technicians, providing ongoing support and development opportunities., • Evaluate technician performance and provide feedback to improve quality and efficiency., • Write Estimates and Proposals and provide to clients., • Divisional Growth: Seek business development opportunities for new clients, encourage repeat business ofcurrent clients. Customer Service: • Address customer inquiries and concerns regarding duct cleaning services., • Provide Commercial and Residential Air Duct and HVAC Cleaning Services with team of Technicians using CaddyVac Cleaning System., • Ensure customer satisfaction by delivering high-quality cleaning services and addressing any issues promptly., • Maintain professional communication with customers throughout the cleaning process. Operations and Quality Control: • Ensure all duct cleaning jobs are performed according to industry standards and company policies., • Maintain and manage cleaning equipment and supplies, ensuring they are in good working order., • Conduct quality control checks to ensure the effectiveness of the cleaning process., • Ensure projects are priced properly to ensure profitability and divisional growth. Administrative Tasks: • Prepare and maintain accurate job records, including work orders, invoices, and customer information., • Manage budgets and track expenses related to duct cleaning operations., • Communicate with Administrative staff for job progress, details, updates., • Follow SERVPRO policies and procedures for successful job completion. Safety: • Ensure that all technicians follow safety protocols and use appropriate personal protective equipment (PPE)., • Conduct regular safety inspections of equipment and work areas., • Promote a safe work environment for all employee Experience, Skills, and Education : Qualifications: • Insurable driving record, • Must be able to pass a drug and medical screening, • Must have a clean criminal background check, • Minimum of Highschool Degree, • Management Experience of at least 3 Years, in related field preferred., • At least 3 Years Industry Experience in Air Duct and HVAC Cleaning, experience in both Residential & Commercial preferred., • Excellent interpersonal skills with the ability to interact with all types of customers, • Strong problem-solving and critical thinking skills, • Comfortable familiarity with HVAC wiring diagrams, • Demonstrated ability to forge strong relationships with clients, • Strong mechanical background, • Ability to lift and move heavy objects, • NADCA Certified, Preferred, • OSHA Certified, Preferred, • ASCS, CVI & VMT Certification preferred Company DescriptionSERVPRO - Franchises of Broome County, Tompkins & Tioga Counties, Elmira/Chemung County and Watkins Glen/ Schuyler County, Cortland & Chenango County, Corning, Bath and SERVPRO of Susquehanna, Bradford and Tioga Counties, has been serving our local community and the surrounding counties for over 30 years. We are a locally owned and family operated business and have a team of professionals ready to assist Business & Homeowners at all times. We understand the stress and worry our customers experience with a fire or water damage and the disruption it causes in their life, and home or business. Our goal is to help minimize the interruption and get back to normal as soon as possible. We are an all-in-one service provider for cleaning, restoration, and construction needs.SERVPRO - Franchises of Broome County, Tompkins & Tioga Counties, Elmira/Chemung County and Watkins Glen/ Schuyler County, Cortland & Chenango County, Corning, Bath and SERVPRO of Susquehanna, Bradford and Tioga Counties, has been serving our local community and the surrounding counties for over 30 years. We are a locally owned and family operated business and have a team of professionals ready to assist Business & Homeowners at all times. We understand the stress and worry our customers experience with a fire or water damage and the disruption it causes in their life, and home or business. Our goal is to help minimize the interruption and get back to normal as soon as possible. We are an all-in-one service provider for cleaning, restoration, and construction needs.

Job Description We are currently hiring an Architectural Technician in our Architectural division at our Syracuse office. The Architectural Division at LaBella provides comprehensive planning and design within dedicated studios with projects ranging from targeted renovations and facility maintenance to projects that define communities. We believe architecture is more than creating, maintaining, and resurrecting the buildings in which we live, work, learn, and engage – it’s about beautifying and bettering the communities we call home. The overall expectations of this position are to produce construction drawings and understand basic construction practices for implementation during construction administration. Additionally, this position will be expected to produce presentation graphics, conceptual 3d models, and be capable of drafting redlines and creating outline floor plans in an efficient manner. Basic construction administration will be performed. It must be understood that assignments and hence supervision will differ from time to time. A successful candidate will be self- motivated with the willingness to learn, train, and continue building their architectural knowledge. The candidate will be trustworthy and punctual have a positive attitude and possess leadership and communication skills. Requirements • Minimum 3 year of experience working for an Architectural/Engineering Consultant., • Minimum associates degree (Bachelor’s degree in Architecture desirable)., • Proficient in Revit., • Must have good planning skills. Salary Range: $45,000.00 - $65,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Position Overview: We are seeking a highly motivated Layout Technician to join our team. You will provide an essential part within our design team. This role plays a vital part in maintaining the success and quality of our fire protection installations. Responsibilities: • Layout: Design and layout fire sprinkler systems in accordance with all NFPA codes and Fire Marshal requirements. Utilizing AutoSprink or similar software to create accurate and efficient sprinkler system layouts., • Calculations: Perform all preliminary and final hydraulic calculations and size piping for fabrication and installation according to jobsite conditions., • Project Turnover: Work with the Estimator/Project Manager for the transfer of project information, including estimated materials, preliminary designs, water flow information and architectural/mechanical construction documents., • Surveying: Conduct site surveys and inspections as needed to gather necessary information for design purposes., • Field Assistance: Provide technical support and guidance to installation teams during project execution., • Data Entry and Record Keeping: Maintain accurate records of customer and project information in our CRM system., • Other Duties: Perform other layout tasks as assigned by management. Qualifications: • AutoCAD experience. (AutoSprink/HydraCAD experience preferred), • Strong organizational skills with the ability to prioritize and manage multiple tasks effectively with the ability to meet deadlines., • Excellent communication and interpersonal skills, both written and verbal., • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Familiarity with customer relationship management (CRM) software a plus., • Ability to work independently and as part of a team., • A keen eye for detail and accuracy., • Positive attitude and professional demeanor., • Understanding of fire protection terminology, a plus., • NICET Level I-III certifications, a plus., • Ability to read and interpret construction documents and specifications, a plus. Education Requirements: • HS Diploma or GED Required. Company DescriptionM&S Fire Protection LLC is a full-service fire sprinkler and fire alarm company. Operating throughout central and western New York. We are continuing to build our team with the most experienced and educated personnel. As a locally owned small business company, we’re able to provide our customers and personnel with the attention and respect they deserve. Our crew is knowledgeable, reliable, and is held at the highest regard in the industry. Fire protection is an important service and we do not take that responsibility lightly.M&S Fire Protection LLC is a full-service fire sprinkler and fire alarm company. Operating throughout central and western New York. We are continuing to build our team with the most experienced and educated personnel. \r\n\r\nAs a locally owned small business company, we’re able to provide our customers and personnel with the attention and respect they deserve. Our crew is knowledgeable, reliable, and is held at the highest regard in the industry. Fire protection is an important service and we do not take that responsibility lightly.

Job Description Are you looking for an opportunity to independently service a territory with the ability to spend most of that time outdoors? What if that opportunity included competitive pay and a generous benefits package, with the largest HVAC preventive maintenance company in the nation? The BFC Solutions team is excited to meet you to explore a Filter Technician role open near you! As a Filter Tech you will enjoy the following benefits: Monday- Friday workday, plus overtime as needed Competitive pay rate Weekly paycheck Company take-home vehicle, dedicated to company use Company phone Potential overnight travel with expenses paid The BFC benefits package includes: • Health insurance, • Vision insurance, • Dental insurance, • 401(k) with employer matching, • 8 paid holidays, • Paid time off, • Multiple opportunities for career advancement As a BFC Solutions Filter Technician, you will replace air filters and perform basic HVAC maintenance primarily in rooftop air ventilation and HVAC systems for retail and commercial customers. Job Requirements: • Must be at least 21 years of age to operate the company vehicle., • Must possess and maintain a valid driver's license and have a good driving record (no DUIs or multiple infractions, subject to monthly review)., • Must live within 40 miles of the designated region., • Must be comfortable and confident working at heights up to 40 feet above ground level and using extension ladders., • Must weigh less than 275 pounds to meet ladder safety and weight limit requirements., • Must be comfortable working outside in all weather conditions., • Proven success working independently with remote supervision., • Must be willing and able to work overtime as required., • Must be able to lift and carry up to 75 pounds, • Overnight travel required during peak times. Meals and accommodation are paid for by the company. Additional details are to be provided during your interview with the hiring manager. Preferred work experience includes any of or a combination of the following: • Facility and/or grounds maintenance, • Construction, • HVAC, • Cable installation, • Route driving #ind123

Job Description Floor Maintenance Technician / Projects Cleaner / Custodian / Janitor Immediate openings! We will train you! Position to start immediately. On-the-job training provided. Weekly Pay! Ongoing Training is provided. Job Duties Include (but not limited to): • Regular use of medium to heavy equipment such as floor buffers, carpet cleaner, auto floor scrubbers and other hands on equipment., • Tile and Grout cleaning, • Performing deep clean services, • Stripping & Refinishing VCT floors to rid of damaged floor finish and reapply, • Keeping supplies and equipment organized and well stocked., • Maintaining cleanliness of company vehicles, • Commercial window cleaning, • Post-construction clean up, • Pressure washing Flexible Shifts: We understand that everyone's schedule is different. That's why we offer various shifts, including mornings and evenings, to accommodate your availability. Competitive Compensation: • Hourly Wage: Starting at $19.00 per hour, depending on your location and experience. Your hard work deserves recognition! About Cleantec: Cleantec isn't just another cleaning company; we're Central New York's premier full-service janitorial and facility maintenance provider. With offices in Syracuse, Ithaca, Binghamton, Rochester, Buffalo, Utica, and Albany, we cover the entire New York region. At Cleantec, we're more than just a company; we are a team and we foster a collaborative and inclusive work culture. Join the Cleantec Team: If you're ready to contribute to our mission, we invite you to join our team. At Cleantec, we value diversity and consider all qualified applicants without regard to race, gender identity, religion, sex, color, national origin, age, disability, marital status, or military/veteran status, in accordance with applicable federal, state, and local regulations. Equal Employment Opportunity. We consider all qualified applicants without regard to race, gender identity, religion, sex, color, national origin, age, disability, marital, or military/ veteran status in accordance with applicable federal, state, and local regulations. Apply Today! Ready to take the next step in your career? Apply now and become part of our team dedicated to maintaining a clean and welcoming environment! Req. HELP-2357 Requirements At Cleantec, we believe in assembling a team of individuals who bring their best to the table. Here are the qualifications we're seeking in our Janitorial Workers, Commercial Cleaners, and Custodians: • Current Valid Driver’s License, • Positive Work History: A track record of reliability and dedication., • Meticulous Attention to Detail: The ability to spot even the tiniest speck of dust., • Customer Service Skills: A friendly and helpful attitude toward our valued customers., • Exceptional Communication: Effective verbal and written skills to keep everyone in the loop., • High School Diploma/GED: A foundational educational background to support your success., • Physical Capability: The ability to lift up to 50 pounds to tackle the heavy-duty cleaning tasks. At Cleantec, we believe that taking care of our team is just as important as taking care of our customers. Here are the benefits you can look forward to as a member of our Cleantec team: Life Insurance: We've got your back, ensuring peace of mind for you and your loved ones. Paid Time Off: Everyone needs a break! Enjoy paid time off to recharge and rejuvenate. Employee Referral Program: Share the love! Refer talented individuals to join our team and earn rewards. Monthly Incentives: Your hard work doesn't go unnoticed! Earn bonuses and recognition for achievements like Employee of the Month, Perfect Attendance, and more. Insurance Benefits and 401K: When applicable, we offer comprehensive insurance benefits and a 401K plan to secure your financial future.

Job Description Monroe Tractor is a well-known and respected construction equipment and agricultural equipment dealer with over 70 years of experience servicing the northeastern US. With 18 locations throughout New York, Pennsylvania, Vermont, Connecticut, and Massachusetts, we pride ourselves on providing best-in-class sales and support to over 15,000 hardworking customers. Since our founding in 1951, the industries we serve have been transformed by the technologies, equipment, and capabilities undreamed of decades ago. But the people we serve haven't changed, and neither have we. We're still a family-owned business! The Road Service Technician is a Diesel technician who preferably has experience in the heavy equipment industry. This person will be required to have mechanical expertise, including diesel, to support the needs of the branch in a professional, safe, and timely manner. You will be performing maintenance services, including repairs for diesel-run equipment. This position includes membership of the IUOE Local 158C Union. Pay Range: $24.77 to $38.85 per hour (Per Union Wage Schedule) Technician Benefits • Union Benefits, • Annual Tool/Shoe Allowance, • Shop equipped with the newest technology and equipment, • Uniforms provided, • Discounts on products and services, • Highly productive shop, • Continued education, manufacturer hands-on and web-based training, • Minimum of 2–3 years of experience as a Road Technician, • Prior experience with heavy construction or agricultural equipment strongly preferred, • Demonstrated ability to work independently while also contributing effectively in a team-oriented environment, • Exceptional customer service skills with a proven ability to establish and maintain professional relationships, • Strong verbal and written communication skills with an emphasis on clarity and professionalism, • High level of urgency and commitment to meeting deadlines in a fast-paced environment, • Proficiency with standard computer applications and diagnostic tools, • Valid driver's license with a clean driving record, • Provide technical service to equipment., • Read job orders, • Observe and listen to equipment in operation to resolve malfunction issues and execute work procedures effectively., • Follow checklists to ensure all critical parts are examined., • Examine protective guards, loose bolts, and specified safety devices on trucks, and adjust as needed., • Test-drive vehicles to ensure that they run smoothly., • Tag all warranty parts and return them to the warranty clerk., • Attend training classes and keep tabs on factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer happiness., • Properly complete the service and/or repairs assigned by the supervisor., • Complete all work according to the applicable safety requirements and published procedures., • Participate in, and utilize to the best of one's abilities, technical training as assigned by management., • Maintain your designated workspace in an organized and clean manner., • Show the utmost courtesy to all guests, visitors, and dealership personnel., • Make every effort to achieve the production objectives set by management., • Adhere to the manufacturer's policies and procedures as they relate to labor operations, time, and repair order documentation when performing warranty repairs and torque specifications. Pay is commensurate with the applicant's experience, as it relates to the position. Pay Range$29.82—$30.76 USD

Job Description As a Solar Engineer, you are responsible for providing ongoing field services support to multiple solar, battery storage (BESS) or other renewable energy systems on a continual/on-demand basis in order to optimize equipment performance, troubleshoot/resolve equipment issues, support emergency repairs and other provide ongoing O&M compliance support. In this role you will assist with all routine site inspections, maintenance projects, equipment & system testing, and other project compliance, troubleshoot or restoration matters. Solar Engineers regularly participate in field support, training and project safety orientations/classes in order to develop skills and technical expertise in one or multiple disciplines including PV array, inverter, medium voltage, BESS and other solar services. Leads and Managers will provide regular coaching and training and will qualify engineers for field operations. Solar Engineers may be responsible for such things as reviewing and assessing solar construction documentation; tracking and monitoring project documentation; evaluating construction and operational issues; meeting with other engineers, site hosts, developers, and investor/owners to present and review project operations, compliance and maintenance/repair matters; participating in industry forums; and possibly even dealing with clients directly. One general requirement for most solar engineering positions is a working knowledge of mechanical and electrical systems, and an understanding of a range of engineering concepts (such as site operations, assessment, analysis, and design, and energy optimization). Essential Job Functions & Responsibilities: Diagnose and repair systems failures as existing solar sites, identify and correct potential issues that may impact site performance in the future. Assist and support field teams with real-time solutions to site operations issues and execute the same. Diagnose/troubleshoot equipment failures and perform regular preventative maintenance on a variety of solar, BESS and other project equipment. Support field teams and clients via oversight/support of warranty matters regarding equipment and systems for use or replacement. Installs, removes, troubleshoots and the maintenance of solar, BESS and other related electrical equipment. Management and support of large scale commercial & Industrial (C&I) PV systems and battery storage systems (BESS) including all preventative maintenance, troubleshooting, repairs and operations; Frequent project site visits as well as remote troubleshooting/analysis via smart software platforms. PV site analysis, asset management, technical drawings/construction assessments, project management and system optimization. Ensure a safe, event-free work environment through strict adherence to company and client protocols, safety procedures and regulations. Ensure compliance with all safety requirements and safe best practices (e.g. lock-out/tag-out compliance, JHA completion, LDL testing, and compliance with all company safety policies or procedures and work practices). Prepare service tickets and reports for site visits, emergency repairs, equipment modifications and equipment improvement investigations. Provide reports, written and oral communication in a timely and complete fashion. Communicate with technical leads, project leads/managers, and third-party sub-contractors to ensure timely resolution to all required activities; Support recommended performance improvements and at address site safety and compliance concerns; Other responsibilities as directed by manager. Knowledge: Knowledge of National Electrical Code and standard design/construction practices; Understanding of OSHA safe workplace practices and procedures; Ability to read and understand electrical drawings; Electric and related utilities and utility maintenance Solar energy installation, maintenance and optimization Skills In addition to the specific work experience and skills, QE Solar also seeks someone with the qualities listed below: • Exceptional work ethic, with strong values and principles, • Able to supervise and coach others in a matrix work environment, • Willingness to work irregular schedules to meet client/project deadlines, • Exceptionally strong communication skills, both written and verbal, interpersonal, and teamwork skills, • A firm commitment to client, team, and organization success, • Flexible and accommodating and able to go above and beyond the basic expectations when required, • High follow-up and organizational skills, • Detailed-oriented, with attention to detail for tasks that have zero tolerance for errors, • Curiosity, • Candor and transparency Physical Requirements: Ability to lift 25/50/80 pounds regularly Ability to move safely over uneven terrain Ability to stand, sit or drive for prolonged periods Ability to safely climb ladders while carrying 50 pounds See also, Physical Demands Task Sheet. Working Conditions Primarily outdoors; Ability to work in extreme weather When working at home, desk conditions. Required Education: Bachelor’s Degree in Electrical Engineering. Required Experience: 0-3+ years of service industry project management experience, or, 0-2+ years of specialist, technical experience with solar projects, BESS, or other renewable systems; Experience with data acquisition systems; veterans or military experienced candidates are strongly encouraged to apply; Preferred Experience: 0-2+ years technical experience as a field technician; Experience working with 600v-1500v systems; Strong knowledge of NEC, IEEE and current NFPA-70e requirements; Proficient with technology and computing programs/platforms; C&I/Utility Scale solar work experience; Experience with operations of solar sites and/or project maintenance and compliance. Required Certifications, Licensures, Etc. Current, Valid, Active Driver’s License and QE Approved Insurance Coverage; Personal Work Vehicle. Preferred Certifications, Licensures, Etc. Inverter and/or BESS manufacturers’ certifications (e.g SunGrow, Power Electronics, Solectria, BYD, etc) a plus Thermography certifications (Level 1) IT/networking skills: Familiarity with RS485, Modbus, tcp/ip, etc. NABCEP PV Installer Certification Minimum OSHA 10/30 Certification Completion of NFPA 70E courses CPR/First Aid Required Other Clean Background Check and Motor Vehicle Report Workplace Type: On-site Salary Range: $30.00 - $40.00 per hour Employment Type: Full-time Location: Syracuse, NY United States Statement to all Third-Party Agencies and Similar Organizations: QE Solar accepts resumes only from contracted recruiting agencies with formal service agreements. Please do not send unsolicited resumes or outreach emails to our QE Solar employees, hiring managers, or team members without expressed consent or contract for services. QE Solar is not responsible for any fees or charges associated with unsolicited resumes or services.

Job Description Entry-level position as an Intern or Co-op in engineering/construction materials. Construction Materials and Engineering Technician performs construction materials testing and inspection at construction sites and in our materials laboratories in accordance with American Society of Testing and Materials (ASTM) or other applicable procedures. Performs testing of soil, aggregate, concrete, bituminous, and masonry construction materials. We provide training and certification prior to independent assignments. About 80 percent of the time is spent at active construction sites providing quality control/quality assurance sampling, monitoring, and/or inspection. The remainder of the time is spent in the laboratory conducting standardized tests to verify that materials meet project specification or office documenting field and/or laboratory testing. ü Competitive Pay ü Training and Certifications provided ü Advancement opportunities ATL is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, national origin, sex, sexual orientation, gender identity, genetic characteristics, disability, military status, protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders.

Job Description Aerial Drop Technician – Installation & Maintenance Position Overview: The Aerial Drop Technician is responsible for installing, maintaining, and servicing overhead (aerial) drop wires that connect telecommunication services from utility poles to residential and commercial customer locations. This role ensures consistent, high-quality delivery of internet, cable, and telecom services while prioritizing safety, customer satisfaction, and compliance with industry standards. Key Responsibilities: Installation & Maintenance: • Install, splice, and secure aerial drop wires from distribution points (utility poles) to customer premises., • Safely climb poles using proper gear (climbing hooks, bucket trucks) to run and attach drop cables., • Mount and weatherproof connections at both pole and premise entry points., • Replace or reroute damaged or outdated aerial drops as required. Technical Operations: • Conduct signal testing, diagnostics, and adjustments to ensure optimal service levels., • Verify and ensure proper grounding and bonding of all aerial drops in compliance with technical standards., • Strictly adhere to OSHA, NESC, and company safety standards, especially when working at heights or around electrical infrastructure., • Perform pre-work site assessments to identify hazards and locate existing overhead utilities., • Communicate clearly and professionally with customers regarding the scope of work, service expectations, and any necessary follow-up., • Accurately document installation details, service tests, and repairs through mobile apps or reporting systems., • Submit daily summaries highlighting work completed, issues encountered, and future service needs. Qualifications: Experience: • 1–3 years of experience in aerial drop installation, telecommunications, or utility fieldwork., • Understanding of copper and fiber-optic cable systems., • Skilled in the use of signal meters, aerial lifts, pole climbing gear, and splicing tools., • Familiarity with aerial safety protocols, including fall protection, ladder/bucket use, and pole-loading evaluations., • Ability to work outdoors in varying weather conditions and heights., • Valid driver’s license with a clean driving record., • Certifications in aerial installation, fiber optics, or OSHA safety training., • Experience using bucket trucks and aerial lift devices., • $20–25/hr install rate, • $16/hr travel rate, • Paid holidays and up to 20 hours of overtime available., • Work vehicle provided., • Per diem meal allowance during travel., • Sick and vacation leave., • 401(k) with company match., • Comprehensive health, vision, and dental insurance. Please submit your resume and any relevant certifications or additional documentation. Application Questions: • Do you have 1–3 years of experience installing aerial drops?, • Do you possess a valid driver’s license?

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The (HVAC) Controls Technician is responsible for the design, configuration, and operation of complete Temperature Control building control systems, and other low voltage control sub-systems to meet the intent of project requirements. What are we looking for • Associates degree in Mechanical Engineering, Electronics, Electrical Engineering, Information Technology or equivalent., • Two (2) years experience with mechanical and/or electrical engineering systems., • Demonstrated knowledge of the construction or HVAC industry., • Basic networking knowledge., • Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building systems., • Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e LON, BacNet, etc.)., • Operating knowledge of Microsoft office software and working proficiency with handheld devices, such as Smartphones, iPads, etc. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. Job Posted by ApplicantPro

Job DescriptionDescription: Advance Testing Company, Inc. is currently seeking a full-time Construction Materials Technician to work on projects in the Northeastern United States. Advance Testing, an established New York-based construction materials testing and inspection firm, has opportunities available for individuals to perform testing and inspection of construction materials such as soils, aggregates, concrete, masonry and asphalt. Typical assignments include projects related to construction of roads, bridges, airports, tunnels, commercial and industrial buildings, schools, government and military sites, and material fabrication and production facilities. Successful candidates will be trained and certified to perform sampling and testing of soil, concrete, and asphalt materials on construction sites and in a laboratory setting through locally and nationally recognized programs. Once trained and certified, employees are considered full-fledged Construction Materials Technicians. Construction Materials Technician – RESPONSIBLITIES • Observe work in progress to ensure that procedures and materials used conform to approved drawings and specifications., • Perform standard testing of materials., • Prepare samples of materials for laboratory testing., • Examine workmanship of installations for conformity to specifications., • Maintain daily log of construction and inspection activities and complete clear, accurate reports daily., • Prepare sketches of construction installations that correlate with testing and inspection sites., • High school diploma or equivalent, • AS Degree in Civil Engineering Technology, Construction Management, Construction Technology, or similar, OR completed coursework toward a BS Degree in Civil Engineering or similar;, • Experience with construction materials testing and/or construction industry preferred (will be trained), • Strong focus on safe work practices and adherence to all safety protocols, • Must be detail oriented and able to work independently, • Must be able to travel and to perform site visits, • Requires a valid, clean driver’s license In addition to providing competitive salaries, Advance Testing Company, Inc. offers a wide range of benefit options, including: • Recently renovated company housing, • Overtime offered at time and a half, • Mileage reimbursement and per diem payments, • Opportunities for professional growth and advancement, • Paid sick days

Job DescriptionDescription: Are you a skilled mechanic or technician looking to take your career to the next level? Kinsley Power Systems is hiring Field Service Technicians to service stand-by generators throughout the Northeast. If you have experience with engines, electrical systems, or heavy equipment—especially in automotive, trucking, marine, or construction—you may already have what it takes to thrive in this role. We offer specialized training to help you transition into the power generation industry and build a long-term, rewarding career. Kinsley Power Systems, a family-owned business, has been a trusted leader in generator service, sales, and rentals for over 60 years. We’re committed to exceeding customer expectations in a workplace that’s both enjoyable and supportive—where your hard work is recognized and your growth is prioritized. Key Responsibilities and Preferred Experience: • Performing preventative maintenance and repairs on standby generator systems (Ranging from 8kW-1mW), • Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators, • Preparing accurate quotes for repairs and completing/submitting work orders, • Previous experience working on residential or industrial generators, • Exceptional communication and customer service skills, • The ability to participate in an on call, rotating schedule, • Must provide your own tools (multi-meter, hand-tools, etc.), • Very safety focused with an OSHA 10 (or the ability to attain one), • Competitive pay and PTO to keep your work-life balance in check, • Full health benefits package (Medical, Dental, Vision, etc.) + 401(k) with match, • Company-paid certifications and specialized training to grow your skills, • Company vehicle and gas card so you’re always ready to roll, • Uniforms provided, plus annual boot and uniform stipends, • Real advancement opportunities—grow your career with a team that wants to see you succeed

Job DescriptionDescription: Survey Technician Fulltime/Hybrid Be Part of Something Exceptional – Survey Technician Opportunity Ready to advance your career in surveying and land development? We’re seeking a Survey Technician who will be a critical part of our project teams—supporting surveyors, partnering with field crews, and ensuring every project is completed accurately, efficiently, and to the highest standards. In this role, you’ll help uphold company policies, technical requirements, and project specifications while creating seamless connections between disciplines. Bring your expertise, attention to detail, and collaborative spirit. Apply today and contribute to building exceptional projects with us! About Fisher Associates At Fisher Associates, our people are the heart of everything we do. As a multidisciplinary design services firm with eight locations nationwide, we empower our team members to drive meaningful change through their work. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. When you join Fisher, you’re not just building a career, you’re helping build a better world. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Process, organize and analyze survey field data using Leica Infinity., • Create and update precise maps, plans, and legal descriptions using AutoCAD Civil 3D to ensure accurate surveys and boundary determinations., • Research and analyze land records, deeds, and survey maps to ensure precise, reliable survey results., • Contribute to technical reports and documentation that ensure accuracy and support project goals, • Perform key mathematical computations to assist in plotting features and boundary lines., • Develop trusted client relationships that strengthen client satisfaction and project success., • Monitor projects for regulatory adherence and update the Project Surveyor., • Implement innovative survey solutions that enhance project outcomes for internal and external clients. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental, and Vision Insurance, • 401(k) Plan, • Company-paid Life and Long-term Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Requirements: What You Bring, Your Expertise as a Survey Technician • High School Diploma or GED required., • Associate’s degree in surveying (or related field) preferred., • 3-5 years of surveying experience preferred., • Knowledge of land surveying mathematical principles, terminology, and field survey methods required., • Experience in downloading, processing, and organizing survey field data., • AutoCAD Civil 3D experience strongly preferred., • MicroStation Open Roads experience preferred., • Experience with PennDOT field and office standards preferred., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment., • Driven to take ownership of projects, prioritize effectively, and thrive in a dynamic, fast-paced environment., • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening., • Have a sense of curiosity and champion continuous improvement. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be able to lift to 50 pounds at a time., • Must possess a valid driver’s license and drive a company vehicle., • Must be able to travel occasionally to project sites located throughout Pennsylvania, Ohio, and New York., • Ability to sit, stand, walk and traverse uneven grounds Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job Description At Atlantic Testing Laboratories (ATL), we offer a dynamic career that blends fieldwork with office assignments. With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're currently looking for experienced and entry-level Construction Materials Technicians to join our team! As a Construction Materials Technician, you will have the opportunity for professional growth and advancement with competitive pay. Construction Materials Technician Perks & Benefits: • Competitive Pay and Health Insurance, • Paid training and certification with cash bonuses for successful completion, • Advancement career and opportunity planning, • Variety in daily work assignments, • Paid Vacations/Sick/Personal/Holidays, • Safety training and equipment provided, • Ability to lift, carry, push, and pull equipment weighing up to 50 pounds., • Basic math and good communication skills., • Possession of a valid New York State driver’s license., • Positive attitude, with the ability to work independently and in a team environment., • Perform sampling, testing, and monitoring of soil, concrete, masonry, and asphalt materials on construction sites and in laboratory settings., • Follow safety standards and procedures., • Prepare accurate test and inspection reports using electronic report templates.

Job DescriptionDescription: Advance Testing Company, Inc. is currently seeking a full-time Construction Materials Technician to work on projects in the Northeastern United States. Advance Testing, an established New York-based construction materials testing and inspection firm, has opportunities available for individuals to perform testing and inspection of construction materials such as soils, aggregates, concrete, masonry and asphalt. Typical assignments include projects related to construction of roads, bridges, airports, tunnels, commercial and industrial buildings, schools, government and military sites, and material fabrication and production facilities. Successful candidates will be trained and certified to perform sampling and testing of soil, concrete, and asphalt materials on construction sites and in a laboratory setting through locally and nationally recognized programs. Once trained and certified, employees are considered full-fledged Construction Materials Technicians. Construction Materials Technician – RESPONSIBLITIES • Observe work in progress to ensure that procedures and materials used conform to approved drawings and specifications., • Perform standard testing of materials., • Prepare samples of materials for laboratory testing., • Examine workmanship of installations for conformity to specifications., • Maintain daily log of construction and inspection activities and complete clear, accurate reports daily., • Prepare sketches of construction installations that correlate with testing and inspection sites., • High school diploma or equivalent, • AS Degree in Civil Engineering Technology, Construction Management, Construction Technology, or similar, OR completed coursework toward a BS Degree in Civil Engineering or similar;, • Experience with construction materials testing and/or construction industry preferred (will be trained), • Strong focus on safe work practices and adherence to all safety protocols, • Must be detail oriented and able to work independently, • Must be able to travel and to perform site visits, • Requires a valid, clean driver’s license In addition to providing competitive salaries, Advance Testing Company, Inc. offers a wide range of benefit options, including: • Overtime offered at time and a half, • Comprehensive group medical insurance, including health, prescription, dental, vision, • Flexible spending accounts for medical expenses and dependent care, • Company paid offset to out of pocket health insurance and prescription costs, • Opportunities for professional growth and advancement, • Paid time off and sick days, • Company–observed paid holidays, • Paid training and certification, • AFLAC Plans including short and long-term disability coverage, life insurance, et al.

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform material testing and inspection services on commercial construction sites. Day trips in the Greater Syracuse, NY area. Responsibilities • Test construction materials such as soils and concrete for quality assurance on commercial sites, • Read construction drawings and specifications and correctly interpret test results, • Complete each testing assignment accurately and in accordance with appropriate standards, • Record and report test results in a clear, concise manner, • Communicate regularly with direct supervisor to provide updates on project details, • HS Diploma, • Associate or bachelor's degree in civil engineering / technology, geology, or related is ideal although not necessary, • Ability to obtain certifications through American Concrete Institute (ACI) and International Code Council (ICC) with full support from CME, • Familiarity with construction materials, procedures, and documents a plus Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR DUWatU5FYE

Job Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. Description C Squared Systems is currently seeking a mid-level RF Field Technician to join our team. One the main responsibilities for the Field Technician will be assisting with the installation and construction of various distributed antennas systems. The candidate will also become familiar with RF concepts and best practices and be exposed to a variety of test equipment. They will become an integral part of a team to ensure the systems are installed per the procedures and regulations mandated by the customer. The candidate must have previous construction experience and be very comfortable interacting with customers and co-workers on a daily basis. This is a hands-on position that requires the candidate to be on his/her feet throughout the day. Candidates have room for growth if they show exemplary performance, which can lead to a position of construction management for larger scale projects. This position will require the individual to be in the field 90% of the time. The candidate must be available to travel with potential overnight stays up to 50% of the time and be available for night shifts/weekends when needed. This is a full time hourly position with at least 40 hrs per week. Primary Responsibilities • Installation of various coaxial cable types of various sizes (1/2”, 1/4” etc.)., • Installation of various fiber cables and fiber heads (single/multi-mode, LC, SC, FC, ST, etc.)., • Perform cable terminations and fusion splicing., • Perform a variety of testing such as sweep and PIM., • Work hands on with spectrum analyzers, transmitters, and other electronic test equipment., • Perform site surveys and in-depth walkthroughs., • Lead installation efforts, troubleshooting, and manage the construction tasks., • Communicate with customers, stakeholders and our cross-functional team., • Installation and repair of various DAS equipment from a variety of manufacturers., • Maintain test equipment and tools for continuous use., • 3 to 4 years of general construction experience. Previous experience with DAS construction and other cellular systems is preferred., • General construction knowledge and know-how. Existing OSHA certifications are a plus., • Ability to read and interpret cabling diagrams and construction drawings., • Proficient with using various tools such as drills, saws, torque wrenches, crimpers, etc., • Experience fabricating various mounting setups (threaded rods, Unistrut etc.) and attaching them to various materials; drywall, wood, concrete., • High attention to detail and excellent ability to multi-task is crucial., • Has the desire to learn and advance within a technical field., • Proficient with using standard computer applications (Outlook, Word, Excel, etc.)., • Comfortable working in the field and have availability for nights.

Now Hiring Experienced Technicians!. HVAC/R Technician, you'll play a key role in delivering reliable, high-quality service to commercial clients. Minimum of 2 years recent experience as an HVAC/R field technician.

Job Description: HVAC Positions- Experienced Service Technician.

Position Title: Service Technician II.

Syracuse, NY (Must be local or willing to relocate at your own expense).Rapid Response is passionate about creating cutting-edge solutions that make a positive impact on protecting life and property.The Project Management Office (PMO) plays a critical role in ensuring the successful delivery of our

Position Title: Service Technician II.

Tradesmen International is looking to expand our team of qualified Trade Professionals for current future projects in and around Syracuse NY.Most positions are first shift.If you are a Carpenter and want to work alongside other proven Craftsmen who emphasize safety productivity and superior workmans

Position Title: Service Technician II.

Direct and manage site development projects from conception through construction.

Position Title: Service Technician II.

Project Cost Estimating Manager.Job Duration: Temp-to-Hire (after a min.Work Type: Onsite Project Industry: Semi-Conductor Industry.Job Description: Our client is hiring a Principal Estimator to support our growing manufacturing/industrial client base.In this position you will be part of.

Position Title: Service Technician II.

Our client is a well-established engineering and geoscience firm specializing in geotechnical engineering, subsurface exploration, construction materials evaluation, and drilling services.

Position Title: Service Technician II.

Direct and manage site development projects from conception through construction.

Position Title: Service Technician II.

Project Management Coordinator.Responsibilities include, but are not limited to:.Coordinate and support the activities of a project team.Assist with defining scope statements.Facilitate scrum meetings acting as scrum master.Supervise, train and mentor Project Management staff as assigned.Assist with

Position Title: Service Technician II.

Tradesmen International is looking to expand our team of qualified Trade Professionals for current future projects in and around Syracuse NY.Most positions are first shift.If you are a Carpenter and want to work alongside other proven Craftsmen who emphasize safety productivity and superior workmans

Position Title: Service Technician II.

In this role, you'll drive execution aligned with Earned Value principles, oversee design computations and cost estimates, and guide the development of reports, specifications, plans, and construction schedules.

Position Title: Service Technician II.

Job Description: HVAC Positions- Experienced Service Technician.

Position Title: Service Technician II.

The Project Manager for the department of Physician Assistant Studies will develop strategy, resources, and programs to meet objectives of the current HRSA grant.Job duties specific to this position:.Manage current professional relationships with primary care medical facilities and providers to ensu

Position Title: Service Technician II.

Tradesmen International is looking to expand our team of qualified Trade Professionals for current future projects in and around Syracuse NY.Most positions are first shift.If you are a Carpenter and want to work alongside other proven Craftsmen who emphasize safety productivity and superior workmans

Position Title: Service Technician II.