Trabajos electrical manager en Brentwood, New YorkCrear alertas

Project Manager \n Execute, manage, and oversee multiple projects, throughout the entire project execution cycle, according to published scope of work and project definition. Responsible for management of these capital equipment system projects, financially and commercially, from receipt of purchase order through customer acceptance. \n Job Description: \n • Primary point of contact for customer and fully responsible for the management of customer expectations, communication and satisfaction. \n • Thoroughly review all customer commercial terms and conditions against Company norms and mange deviations to ensure all terms are acceptable to both parties and ultimately satisfied. \n • Ensure project designs and deliverables meet the defined scope of work, Technical Proposal and/or customer specifications. \n • Work with Team to develop and disseminate a budget and schedule for every project. \n • Monitor task completion, purchasing and material control to ensure all completed according to schedule and budget. Raise red flag for all deviances. \n • Manage all project subcontractors, fabricators, vendors in accordance with project SOW, schedules, budgets, customer requirements, and VJT standard operating guidelines \n • Prepare weekly report for Management to summarize progress of project execution against budget and schedule with variances and red flags noted. \n • Responsible for delivering all Company and customer mandated project documentation and submittals into customer per schedule and defined requirements. \n • Work with sales team pre and post-sale to fully understand project scope and pricing. \n • Interact with a cross-disciplinary engineering team, operations team, installation team and sales team to ensure proper management, execution and completion of project according to defined budget and schedule. \n • Travel to customer sites worldwide to participate in concept and technical discussions, kick off meetings, oversee installations, or to ensure maintenance of a positive customer relationship. Global travel up to 20% of the time \n • Potential travel to sister facilities within the US, India, China and France. \n Essential Skills: \n • Degree in Engineering or other technical discipline \n • Minimum five (5) years of project management experience with at least two (2) years of concentration on budgeting, cost management and commercial terms oversight \n • At least two (2) years of experience managing capital equipment projects \n • Experience working with an ERP or MRP system \n • Proficiency in establishing, negotiating and monitoring commercial terms and conditions \n • Must be able to thrive in a fast paced, demanding environment and able to quickly assess project status and take appropriate action to control and maintain project scope, schedule, and budget. \n • Capable of effectively communicating both internally and externally using all available methods of communication. \n • Strong mechanical and electrical aptitude and problem-solving abilities \n • Skilled in MS Office Suite and MS Project \n • Well defined organizational and time management skills coupled with the ability to operate independently with minimal guidance by management. \n • Prior experience in a QA controlled design environment. (ISO 9000, NQA-1, or similar) \n Non-Essential Skills: \n • MBA, or equivalent advanced Degree \n • Familiarity with MS AX ERP systems \n • Experience with Solidworks \n • Understanding or prior experience working in the x-ray or non-destructive testing (NDT) market \n • Fluency in multiple languages \n Physical Demands: \n • Regularly required to sit, walk, bend and stand in an industrial environment \n • Expected to effectively communicate in person, on phone, and via email and other electronic devices on a continual and repetitive basis. \n • Will need to repeatedly use hands to finger, handle, feel and operate standard office equipment \n • Day to day responsibilities may require lifting, moving, carrying and maneuvering materials up to 25 pounds alone; heavier with assistance. \n • Specific vision abilities required include close vision, distance vision and the ability to adjust focus. \n Mental Demands: \n • On a regular basis, will be required to: \n\n • use written and oral communication skills\n, • read and interpret data, information and documents\n, • analyze and solve non-routine and complex office administrative problems\n, • be creative, make judgements, use reasoning and make decisions\n, • observe and interpret situations\n, • learn and apply new information or skills\n, • perform detailed work on multiple, concurrent tasks\n, • work under intensive deadlines with frequent interruptions\n, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels\n\n, • Must be able to fulfill essential job function in a consistent state of alertness and safe manner. \n This position has been deemed a Safety Sensitive position. \n The responsibilities and skills noted within this job description are not all inclusive and are subject to change. \n This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated fairly during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

PROJECT MANAGER / HVAC - Refrigeration \n Location: West Babylon, NY \n \n WHO IS FIRSTCALL MECHANICAL? \n Select is a commercial HVAC services company based in Long Island, NY. Founded in 1980, Select partnered with FirstCall Group in 2025. \n \n FirstCall Group is a leading provider of commercial and industrial HVAC, building controls, electrical, and plumbing services. FirstCall serves a wide array of facility and customer types, including distribution centers, industrial plants, universities, airports, healthcare facilities, self-storage units, and more. With approximately 700 employees across Ohio, New York, Virginia, Tennessee, North Carolina, South Carolina, Georgia, Florida, and Texas, FirstCall is committed to building durable partnerships. The company is actively expanding its operations nationwide and partnering with organizations that share its dedication to quality and customer satisfaction. \n \n FirstCall Group not only partners with companies to nurture growth in the market but also provides equal focus on employee growth and development as well. We believe when YOU succeed, we all succeed, so we strive to be the first call for talented team members who want a career, not just a job. \n \n BENEFITS OVERVIEW \n FirstCall Group values our employees' well-being, growth, and success! Employees are offered a robust benefits package, including: \n\n • Competitive Weekly Pay\n, • Comprehensive Healthcare Coverage - Medical, Dental, Vision, + More (Includes some 100% Company-paid plans)\n, • Financial Resources - 401(k) Retirement Savings Plan with a 5% match, Life Insurance, Short & Long-Term Disability\n, • Time-Off & Holidays - Up to 4 weeks of Paid Off, 9 Paid Holidays + Veterans Day for Veterans\n, • Career Growth & Development- Company-sponsored education and career advancement programs like the FirstCall Academy, the Learning & Education Assistance Program (LEAP), and the FirstCall Progression Program\n, • Generous Referral Bonus of $2,500 per referral\n, • Role-Specific Perks - Company vehicle or allowance, mobile phone or phone allowance, uniforms, and work boot allowances\n\n \n POSITION OVERVIEW \n We are currently seeking an experienced Project Manager to join our fast-growing team. This role will owe the install and project work end-to-end - estimating, planning, scheduling, execution, and closeout - for HVAC and commercial refrigeration installations, retrofits, equipment replacements, and store refresh/renovation projects. Our customers are primarily convenience stores, fuel-retail, and light-commercial accounts across Long Island and the New York metro. This is a hands-on role for someone who can scope and price a job, get the crew and materials lined up, and drive the project to a clean, on-budget finish. \n \n JOB RESPONSIBILITIES \n\n • Estimate and quote install and project work — HVAC and refrigeration install, retrofits, equipment replacements, and store refresh/renovation projects.\n, • Set up and plan jobs — define scope, order equipment and materials, secure permits, and build the project schedule.\n, • Schedule and coordinate crews — assign and manage install technicians and field labor to keep projects moving (employee logistics).\n, • Own the project to budget and timeline — track cost vs. estimate, manage change orders, and project profit margin.\n, • Manage materials, equipment, and vendors — purchasing, delivery coordination, and supplier relationships for project work.\n, • Coordinate fleet and equipment logistics needed to execute jobs.\n, • Customer coordination — scope, timelines, approvals, and updates with customers and their facilities teams.\n, • Quality, safety, and code compliance — ensure installs meet spec, code, and safety standards.\n, • Closeout — final walk, documentation, and clean hand-off to billing.\n, • Work in BuildOps — estimates, project tracking, POs, and job costing.\n\n \n ACCOUNTABILITIES \n\n • Continual learning and development in the body of knowledge through FirstCall Academy, to ensure we set the bar for skill level in the industry\n, • Elite level of customer service, to ensure we continue to be the FirstCall our customers make for their HVAC needs\n\n \n ORGANIZATIONAL ALIGNMENT \n This position reports to the local Operations Manager. \n \n QUALIFICATIONS \n Required: \n\n • 5+ years in commercial HVAC and/or refrigeration project management, install management, or estimating.\n, • Proven experience estimating and running install / retrofit / replacement projects with budget and schedule.\n, • Ability to read plans and drawings, scope work, and price it accurately.\n, • Crew scheduling and field coordination experience.\n, • Solid knowledge of commercial HVAC and refrigeration systems.\n, • Strong organization, budget discipline, and customer communication.\n, • Comfortable with project/field software (BuildOps or similar)\n, • Valid drivers license\n, • Long Island/New York metro based\n\n Preferred: \n\n • Experience with convenience store, fuel-retail, or multi-site retail projects (e.g., 7-Eleven or similar).\n, • Hands-on commercial refrigeration depth.\n, • Hands-on commercial refrigeration depth.\n\n

Job Description ???? Lead Projects That Power Communities - Join Empire Electric Maintenance as a Project Manager! ???? Position Title: Electrical Project Manager Company Name: Empire Electric Maintenance Salary: $85,000-$125,000+ per year + performance bonuses Industry: Electrical / Controls (Residential, Commercial) Location: Long Island, NY Job Overview Empire Electric Maintenance is seeking a skilled and proactive Electrical Project Manager to oversee multiple commercial, residential, and government electrical projects from pre-construction to closeout. This is a full-time, hybrid position designed for a driven individual who thrives in managing complex installations, navigating vendor negotiations, and identifying change orders before they happen. If you're a hands-on former electrician turned project leader who understands the field and can speak the language of both clients and crews-this is your next great opportunity. Who We Are Empire Electric Maintenance is a young, dynamic company committed to growth, quality craftsmanship, and long-term career development. We specialize in delivering electrical solutions across residential, commercial, and federal sectors. With an incredibly low turnover rate, our team is built on loyalty, opportunity, and professional support. At Empire, you're not just building projects-you're building your career with a company that invests in your success through mentorship, paid certifications, and a culture that celebrates achievement. Learn more at www.empireelectric.co Key Responsibilities Manage multiple electrical projects simultaneously from planning to completion Conduct on-site job walk-throughs and coordinate preconstruction meetings Coordinate procurement of materials and equipment Handle submittals, RFIs, change orders, and project documentation Monitor and manage project schedules, budgets, and performance benchmarks Write detailed scopes of work and collaborate with clients and internal teams Identify and estimate potential change orders proactively Collaborate with estimators for pricing, submitting, and tracking changes Ensure compliance with NEC codes, OSHA standards, and company policies Assist field crews when needed and maintain quality control across job sites Seek out new business opportunities and maintain strong client relationships Qualifications 5+ years of experience as an Electrical Project Manager or in a similar leadership role Associate's degree preferred or equivalent field experience Deep understanding of industrial and commercial electrical systems Proven experience with electrical projects up to $1 million Familiarity with construction documentation and cost control practices Strong communication and leadership skills Ability to interpret blueprints, perform material take-offs, and write proposals Field installation background is highly preferred Excellent organizational and time management abilities Must be a self-starter with a solution-focused mindset Benefits Paid Time Off (Vacation, Sick Leave, Holidays) Paid Parental Leave Weekly Pay Cycle Wellness Programs Paid Training and Certifications Apprenticeship and Mentorship Support Personal Tool Replacement Program Company Uniforms Employee Recognition & Rewards Company Events and Annual Trips 401(k) Retirement Savings Plan Referral Bonus Program Opportunities to work on prevailing wage projects Schedule Full-Time, Monday to Friday Hybrid position with regular in-person site visits Location Hybrid (Fieldwork and Remote Coordination) Based in proximity to Empire Electric Maintenance's regional service areas Equal Employment Opportunity (EEO) Statement We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. #AppCast

Job Description The Senior Estimator is responsible for managing the electrical estimating process and producing comprehensive bid estimates for commercial construction projects. In this role, you will demonstrate your construction cost estimating techniques and knowledge in quantity takeoffs, as you complete the entire bid from the beginning to the completion of the tender. Key Responsibilities: • Produce accurate estimates of material and labor costs for the electrical element of the project., • Prepare and send out accurate electrical estimates and tender documentation., • Analyze all quotes received for electrical material and labor costs and efficiently utilize negotiation skills to achieve the best value., • Evaluate technical requirements and estimating costs to determine prices and margins of all electrical equipment., • Create estimates/quotations to potential customers - ensuring both the customer and business needs are met, and the forecast is in line with requirements., • Work closely with Branch Manager, Subcontractors, Engineers and Development Managers during the estimating/tender process - building stable working relationships., • Utilize estimating software such as Accubid and Bluebeam., • Evaluate bid opportunities and liaise with potential clients, working within project deadlines to produce accurate electrical estimates., • Review and understand all project plans, requirements and specifications., • Review quotes and estimates with Branch Manager and Pre-Construction Manager to prepare recommendations for resolution of any project risks., • Identify and report escalation factors in the marketplace for specific materials and labor rates., • After submittal, actively compare and analyze competitive subcontract and supplier bids., • Ability to substantiate all aspects of final estimates. Qualifications • Advanced electrical estimating experience., • Proficient in estimating software., • Ability to estimate all types of projects., • Knowledge of standard electrical pricing Requirements: • High School or GED., • 8-10 years work experience (10+ years Preferred.), • Associates or Bachelor's Degree (Preferred). Work Environment: This job is fully in person, on site. Salary: $120,000 - $150,000 (DOE) Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance Equal Employment Opportunity HATZEL & BUEHLER provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, HATZEL & BUEHLER complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. HATZEL & BUEHLER expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of HATZEL & BUEHLER’s employees to perform their job duties may result in discipline up to and including discharge. Americans with Disabilities Act Applicants as well as employees who are or become disabled must be able to perform the essential job functions either unaided or with reasonable accommodation. The organization shall determine reasonable accommodation on a case-by-case basis in accordance with applicable law.

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer’s mission critical needs, PDC is seeking an Intern-Engineering to join our respected and valued team. This position is 100% onsite in our Bohemia, NY corporate headquarters and is a temporary internship. The compensation for this role is $20-$25 hourly based on education/experience. During School Hours: 16 hours Weekly Summer Hours: 30 hours Weekly This position requires a U.S Person or a person who can qualify for a department of state or commercial license. *We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Role purpose (position scope): This is an internship position for the organization’s Engineering Department. The primary role of an intern is to perform technical work within their functional area of study of Electrical Engineering, but may also include special projects that utilize basic engineering skills not solely tied to their degree program. Key Responsibilities: (May include but not limited to:) • Participate in design reviews, • Develop and document technical theory of operations for design work completed, • Develop plans and reports to include charts and graphs., • Basic circuit design, circuit analysis, schematic capture tools and simple PCB design., • Trouble shooting with common lab equipment, • Basic electronics assembly and soldering, • Part selection and bill of material development, • Design and write software code for products or testing., • Assemble cables or prototypes., • Comply and uphold Power Device SHE policies and standards., • Comply with the Power Device Code of Business Conduct and Ethics, • Other duties as assigned by manager Core Competencies: • Excellent organizational skills, • Must be knowledgeable with typical computer programs such as MS Office., • Must possess basic knowledge of their particular degree program., • Must be able to write proficiently with emphasis on technical documentation, • Scientific charting and graphing with MS Excel, • Experience with basic test equipment (i.e. DMM, Oscilloscope) commensurate with degree program, • Critical thinking and be able to work independently and cooperatively., • Leverage generative AI tools (such as ChatGPT) and automation workflows to streamline routine engineering tasks, analyze technical data, and accelerate daily productivity., • Positive attitude Level I – Entry (Inexperienced) • KNOWLEDGE – Limited use and/or application of basic technical principles, concepts and practices., • JOB COMPLEXITY – Works on problems of limited scope. Follows standard practices and procedures in analyzing situations or data from which answers can be readily obtained., • DISCRETION/LATITTUDE - Work is closely supervised. Follows specific, detailed instructions., • MINIMUM EDUCATION & EXPERIENCE – Enrolled in an Electrical Engineering, technical or scientific program (or similar related degree program for project management) Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Mama’s Creations, Inc. (NASDAQ: MAMA) is a leading marketer and manufacturer of fresh deli prepared foods, found in over 8,500 grocery, mass, club and convenience stores nationally. The Company’s broad product portfolio, born as MamaMancini’s, from a rich history in Italian foods, now consists of a variety of high quality, fresh, clean and easy to prepare foods to address the needs of both our consumers and retailers. Our vision is to become a one-stop-shop deli solutions platform, leveraging vertical integration and a diverse family of brands to offer a wide array of prepared foods to meet the changing demands of the modern consumer. For more information, please visit https://mamascreations.com Position Summary The Manager, Facilities is responsible for the enterprise-wide strategy, execution, and continuous improvement of facilities, and sanitation operations across all Mama’s Creations locations. This role ensures buildings, utilities, infrastructure, and site services are safe, compliant, environmentally responsible, and operationally reliable. This role is both strategic and hands-on. In addition to establishing enterprise facilities standards, systems, and priorities, the Senior Manager will actively support facilities and sanitation execution, including on-site troubleshooting, inspections, project support, and direct coordination with contractors and regulatory agencies, as needed. With a commitment to Grandma Quality, demonstrated by pride in workmanship, accountability, and leadership by example, partner closely with Program Management, Operations, FSQA, and site leadership to ensure facilities reliably support the overall operation today, while scaling for future growth. Key Responsibilities • Provide enterprise leadership for facilities operations across all manufacturing and office locations, including buildings, utilities, infrastructure, and site services. • Establish, execute, and continuously improve enterprise facilities standards, policies, and operating practices, while accounting for site-specific layouts, equipment, and operating conditions. • Serve as a hands-on facilities leader, actively supporting on-site facilities work as needed, including inspections, troubleshooting, project execution, and issue resolution. • Ensure facilities operations support safe, compliant, and efficient production and administrative. • Oversee preventive and corrective facilities maintenance related to building systems, including HVAC, refrigeration, electrical distribution, plumbing, compressed air, steam, water, and wastewater systems. • Own facility-related permitting and approvals, including building permits, inspections, certificates of occupancy, and associated documentation. • Serve as the primary enterprise interface with authorities having jurisdiction (AHJs), including building departments, fire marshals, environmental agencies, and utility providers. • Actively coordinate inspections, approvals, and close-outs, ensuring projects and modifications meet code, environmental, and operational requirements. • Lead and support environmental compliance programs, including wastewater, stormwater, air emissions (as applicable), hazardous materials handling, waste management, and spill prevention. • Own sanitation execution and readiness across all facilities in alignment with FSQAdefined standards, SOPs, and acceptance criteria., • Lead and manage a defined group of dedicated sanitation employees, ensuring staffing, training, scheduling, and execution meet operational and food safety needs. • Ensure sanitation activities are completed on time and to standard, supporting successful FSQA pre-operational inspections and production release. • Provide and maintain sanitation tools, chemicals, equipment, and infrastructure required for effective execution. • Own sanitation labor planning, budgeting, and cost control, to minimize spend while meeting FSQA standards, operational needs, and commitment to Grandma Quality. • Respond to and correct sanitation deficiencies identified by FSQA, ensuring timely and sustainable corrective actions. • Partner with Operations to align sanitation windows with production schedules while protecting food safety integrity. • Reinforce disciplined sanitation execution as a critical control system, not a support function. • Provide facilities leadership and hands-on support for CapEx projects, expansions, and facility upgrades, ensuring reliability, safety, and compliance are designed in. • Actively oversee and support office, and manufacturing facility upkeep, layout changes, and reconfigurations, ensuring offices and production areas are safe, functional, and reflect Grandma Quality in appearance and execution. • Oversee grounds and exterior facility maintenance, including landscaping, snow and ice removal, parking areas, walkways, and exterior lighting, ensuring safe access, regulatory compliance, and a professional, well-maintained appearance year-round. • Coordinate closely with Reliability & Asset Management on shared systems, infrastructure reliability, and asset lifecycle planning. • In partnership with Procurement, manage and directly engage third-party vendors and contractors, ensuring safety, quality of work, compliance, and cost control. • Develop, track, and review facilities and environmental KPIs, including work order completion, compliance status, inspection outcomes, and utility reliability. • Identify risks, constraints, and improvement opportunities related to facility condition, capacity, environmental compliance, and infrastructure readiness. • Participate in M&A diligence and post-acquisition integration, assessing facilities condition, permitting status, environmental risk, and infrastructure gaps. • Ensure facilities and environmental practices are standardized across locations, while allowing flexibility for site-specific needs. • Communicate facilities performance, risks, and priorities clearly to enterprise and site leadership. • Reinforce a culture of Commitment to Craftsmanship, safety, environmental stewardship, accountability, and respect through daily actions and expectations. Qualifications • Bachelor’s degree in Facilities Management, Engineering, Environmental Engineering, Industrial Maintenance, or related field. Relevant work experience will be considered for internal candidates. • 10+ years of progressive experience in facilities management within manufacturing or industrial environments. • 3+ years of experience leading facilities teams or site-based leaders in a multi-site environment. • Demonstrated ability to both lead and perform facilities work, including building systems troubleshooting and project execution. • Strong working knowledge of industrial building systems, utilities, and infrastructure., • Working knowledge of environmental compliance requirements, including wastewater, stormwater, waste management, and applicable air regulations. • Experience managing permits, inspections, contractors, and regulatory interactions., • Strong organizational, problem-solving, and leadership skills., • Ability to partner cross-functionally and lead through influence., • Experience in food manufacturing or other regulated environments. Essential Physical Requirements • Ability to regularly perform on-site facilities work, including walking, standing, climbing, bending, and navigating mechanical and utility spaces. • Ability to navigate stairs, ladders, catwalks, rooftops, and uneven surfaces safely., • Ability to wear required PPE, including safety shoes, gloves, safety glasses, hearing protection, and other protective equipment. • Ability to lift, carry, push, or pull up to 50 pounds., • Ability to work in varying environmental conditions, including temperature extremes, noise, humidity, and exposure to industrial systems. • Ability to travel between facilities as required., • Ability to sit for extended periods while performing planning and administrative work., • Ability to communicate clearly and effectively, verbally and in writing. This job description is intended to describe the general nature and level of work being performed. It is not an exhaustive list of all responsibilities, duties, or skills required. Duties, responsibilities, expectations, and reporting structures may change at any time based on business needs, organizational priorities, or operational requirements, with or without notice

Job DescriptionDescription: Job Overview For more than 75 years, Heatherwood has been committed to building upscale residential rental communities, commercial properties, and luxury urban spaces. Our commitment to quality constructions, striking designs, and providing exemplary service, makes us one of the most highly regarded leaders in the industry. Additionally, we offer a competitive benefits package including health & dental, and vision insurance, 401(k), and paid PTO. Heatherwood is on a mission to create high-quality places that inspire a genuine sense of community. As a Maintenance Manager for Heatherwood, you are the driving force in providing great service to our residents in a fast-paced, challenging and rewarding environment. Responsibilities and Duties • Apply a “Safety First” approach to everyday at Heatherwood., • Maintain the properties interior and exterior standards., • Openness and approachability to feedback and consistent communication with your team and management, • Support NYC Local Law Compliance through strong understanding of the requirements, vendor management and strong collaboration with 3rd party engineers., • Advanced understanding and experience with the following mechanical systems, but not limited to (different types of HVAC equipment, plumbing (boilers, water heaters, drain clearing, fixture replacement), electrical repair and troubleshooting, appliance repair, painting and carpentry., • Ability to use multiple building and property management applications and software including or similar functionality to; Yardi, SuiteSpot, and Microsoft Outlook, Word, and Excel, • Manage the day-to-day maintenance expenses of the community, including all bill payment, purchasing, capex invoicing and offsetting unbudgeted expenses., • Advanced knowledge of high-rise mechanical systems including fire and life safety systems, BMS, boiler systems, water pumps, cooling towers and elevator systems, • Train and develop maintenance technicians on both technical and administrative skill sets to support growth., • Ensure Heatherwood’s standards and core values are consistently met., • Strong managerial approach to general building maintenance, capital improvement projects, work order management systems and the apartment make ready process., • Ability to effectively troubleshoot and problem solve maintenance issues in a fast-paced setting., • Performance management of all maintenance associates Includes recognition, performance improvement plans, development, annual reviews and verbal/written corrective action., • Shared responsibility of “On-Call” schedule with your property and other Heatherwood properties, • Ability to learn or oversee a Sewer Treatment Plant and Swimming Pools where applicable., • Job responsibility requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, kneeling, stooping, crawling, and climbing. This list is an example of the Maintenance Manager responsibilities but is not an all-inclusive list of job descriptions. Business needs will dictate additional responsibilities. Requirements: What You Bring to Heatherwood • A positive attitude, • Team first approach to every day, • A history of being a proven leader., • A minimum experience of 5+ years in a supervisory role in multifamily residential, commercial or hotel maintenance, or similar field experience, • A proven track record of managing maintenance associates., • Experienced in managing 3rd Party porter, concierge, and doorman services., • Operate with professionalism and integrity., • A customer first approach to providing world class maintenance and service., • Ability to work directly with the Community Manager to drive effective day to day operations of the maintenance operations at the community., • Strong time management and ability to implement and communicate timelines to the field team for timely task execution., • Ability to manage multiple projects daily and communicate time frames, obstacles, and resolutions to the larger team., • Strong vendor management experience includes communicating schedules, providing materials, project execution and vendor accountability., • Advanced understanding of computer and smart phone skills Have experience managing a work order system, purchasing and budget management., • Balance between field and administrative workload, • Strong routines on bill payment, budget variance knowledge and timely budget spend., • Safe understanding of hand/power tools/mechanical systems and use of PPE, • Flexibility to respond to emergency issues after hours and on weekends., • Attention to detail and consistently doing the job right the first time., • Universal HVAC Refrigerant Certificate, Certificate of Fitness, low pressure boiler license, CPO Certificate, • Valid driver’s license Your Development • Heatherwood Safety Culture – monthly team safety trainings, • How your success in maintenance contributes to the communities’ goals, • How to effectively manage your time and communicate in a fast-paced setting., • Experience support community management by leading the maintenance operations of the community., • Pool and Spa training Support in obtaining CPO (Certified Pool Operator) certificate if required., • HVAC training and support in obtaining HVAC Universal License, • Attention to detail and supporting Heatherwood’s maintenance standards., • Ongoing maintenance training and development and internal company growth opportunity

Job Description K&A Power Group – is a privately held engineering firm delivering worldclass technical expertise and engineering excellence to power utility and industrial clients across the United States, Asia, the Middle East, and Africa. We provide comprehensive consulting, engineering and design, program and project management, construction management, and EPC services, specializing in substation, transmission, distribution, and distributed energy resources. We pride ourselves on attracting and developing top talent, building a culture of excellence, and building meaningful, long-term relationships with our employees, clients and communities, wherever they are in the world. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Field Construction Coordinator to join our team at K&A Power Group in Auburn, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Field Support to Resolve Problems – Being Proactive, • Must do Reporting – Weekly Report, Monthly Reports, tracking of weekly PayId’s completed., • Monitor Schedule - Look Ahead vs. PM, • Attend the contractor’s Safety, Environment and Quality meetings; provide a tip in the onsite meeting., • Maintain and update as needed the onsite H&S, Environment and Quality project binder., • Be organized, and document all project progress to provide a good paper trail, • Review contractor invoices and schedules and provide feedback., • Conduct weekly project progress meeting. Request the contractor two week look ahead schedule at each weekly meeting., • Present onsite when work is being performed (make frequent observation of contractor’s activities)., • Immediate notification to PM of all problems or foreseeable issues throughout construction, or any complaint presented by the general public., • Coordinate Material delivery between Customer Stockroom, and Contractor., • Inspect all project related construction material for damage and completeness for the project execution., • Inspect work in progress to ensure that workmanship conforms to specifications, quality and adherence to construction schedules., • Facilitate resolving construction problems, discrepancies, procedures, and methods by working with engineering personnel, inspectors, contractors and suppliers. Must have strong communications skills., • Minimize Change Orders. Support Project Manager to review any requested Change, • Orders/Notices or other claims submitted by Construction Contractors which relate to additional payments, schedule adjustments or other modifications to the Project, and make such recommendations to the PM regarding the legitimacy of such claims and review the, • Construction Contractor’s proposed mitigation., • Review and understand the project documentation and any related documentation and provide input to enhance the constructability of the Project, taking into account schedule, cost and quality considerations., • Maintain a daily on-site as-build project plans., • Continuously communicate (written and verbally) with the associated PM., • Adhere to company policies, programs and procedures as well as Critical Infrastructure, • Protection (CIP). Ensure all requirements are maintained throughout the project execution, • Promote a proactive safety culture by encouraging open communication, reporting unsafe conditions, and suggesting improvements to safety practices., • Diligently ensure compliance with safety regulations, conducting safety inspections, and identifying potential hazards to mitigate risks and maintain a safe working environment for all personnel. What we’re looking for: • Minimum of five (5) years’ experience in progressive related electric utility industry experience, with transmission facilities construction management, • Two (2) years of college is preferred, • Construction Project Engineer Background Preferred, • Distribution line work experience required, • MS Suite Required – with high competency in MS Excel, • Knowledge of NRA clearances and switching orders would be beneficial, • Applicants should have the knowledge, experience and skills needed to review project plans, specifications, contract enforcement, and applicable technical standards, OSHA and other regulatory statutes., • Detailed work experience in electrical Utility transmission UV/OV & civil construction, • Must have current US Work authorization and valid US Driver License in good standing, • Minimum of 5 years of supervisory capacity experience, • Knowledge of GPS Systems & knowledge of SAP are preferred, • Ability to read and interpret specifications and drawings and convey interpretations to contractors, • Ability to investigate and solve construction problems in a timely manner with minimum dependence on others, • Computer and Administrative skills, • Strong verbal, written and interpersonal communication skills, • Must be able and willing to attend training in E-STAR/CONVEX (switching and tagging)., • Initiate distribution outage requests for project work through E-STAR and/or CONVEX Pay Range $40—$46/an hour Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with company match), • Lifestyle Spending Account (LSA), • Paid Parental Leave after 12 months of employment, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program), • Parking and Transit Reimbursement, • Pet Insurance Check out our career page for more information! The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job DescriptionDescription: Position Summary: The Manager of Equipment Maintenance is responsible for supporting assigned production divisions to ensure equipment, documentation, plant, and support systems are repaired, maintained, up to date, and in good working order. Day and Night shift opportunities available. Requirements: Responsibilities: Responsibilities include, but are not limited to: • Develop, execute, and manage equipment maintenance department to meet all requirements and yield a greater than 90% first time right., • Communicate daily with cross-functional department directors and managers., • Troubleshoot and resolve complex equipment issues, driving root cause analysis., • Maintain and process paperwork (internal PO and Vendors) for Accounts Payable., • Evaluate and monitor spare parts to minimize downtime. Monitor and maintain spare parts database, submit requisition for equipment and parts as needed., • Manage relationships with cross-functional teams to install, rebuild, or replace production equipment., • Manage plant maintenance support personnel., • Ensure that technical staff are adequately trained, equipped, and motivated so that technical work can be accomplished in a safe, timely, and cost-effective manner., • Review the operation of plant equipment and systems constantly to minimize unplanned downtime, anticipate and solve problems in a timely manner, and identify opportunities for improvement., • Initiate and carry out projects that improve efficiency and/or reduce operating costs., • Track, analyze and improve key maintenance parameters such as asset utilization, maintenance cost, PM compliance, schedule compliance, etc., • Interface with all equipment monitoring, CMMS, BMS and production/project management software, to plan work activities, and develop interdepartmental feedback, ensuring proper record keeping for maintenance activities., • Perform center lining and 5S work to production lines, product contact parts, and change parts., • Maintain safety, health, and environmental policies and procedures., • Act as role model exemplifying superb ethical conduct and decision making, teamwork, integrity, agility, respect, and accountability., • Other responsibilities as assigned by senior management. Education and Experience: • High school or GED diploma required., • Bachelor’s degree in mechanical engineering, Industrial Maintenance, or related field, or equivalent experience., • 5 years of experience in mechanics and electrical, preferably in a pharmaceutical manufacturing setting; at least 1 year in supervisory or management role. Skills, Knowledge, and Abilities: • Proven leadership experience, with the ability to supervise and motivate a team., • Knowledge of safety regulations, compliance standards, and risk assessment procedures., • Expert knowledge of production equipment and facility’s support systems., • Excellent problem-solving, organizational, and communication skills., • Proficiency in maintenance management software (e.g., CMMS) and Microsoft Office Suite., • Proficient with test equipment, data managing leading to databased decision making., • Strong mathematical/analytical aptitude., • Willingness to lead by example, fostering a shared culture of efficiency with importance on meeting project commitments with on-time completion., • Ability to prioritize and multitask. Physical Demands: • Required to use hands to handle or feel objects, equipment, tools, computer controls and operational machinery., • May be required to lift and/or move up to 50 lbs., stand, bend, kneel, crouch, sit, talk, hear, and walk for a long period., • Specific vision abilities required include close vision, ability to focus. Work Environment: • Work environment in production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Required to be present in the office to collaborate with executive management, department directors, peers, and supervisors on an as needed basis., • Regular, ongoing travel throughout geographic areas on a continual basis as normal scope of role., • Employee travel/work hours/schedule/location and/or shift are subject to change based on business needs and Management discretion., • Regularly exposed to noise, dust and vibrations in a manufacturing environment; PPE may be required., • Responsible for compliance with all rules and regulations pertaining to safety policies and for leading by example with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel. Supervisory Responsibilities: • Manage union and nonunion personnel Personal Protective Equipment or Attire Required for Position: • As needed. Pay Range: $80,000 - $100,000 per year

Job Description The Controller is responsible for overseeing the accounting operations and ensuring accurate financial reporting, strong internal controls, and efficient financial processes for a mid-size lighting and electrical distribution company serving contractors, EPC firms, and capital projects across regional and national markets. This role manages the day-to-day accounting function including general ledger, accounts payable, accounts receivable, and financial reporting while ensuring financial integrity across distribution operations, stored material programs, and project-based deliveries. The Controller partners closely with the VP of Finance and operational leadership to provide financial insight into inventory, project profitability, customer terms, and working capital management. This position requires a hands-on accounting leader with experience in electrical distribution, construction supply, building materials, or project-based businesses, including familiarity with project accounting and construction-related billing structures. RESPONSIBILITIES: • Financial Reporting & Close, • Manage the monthly, quarterly, and annual financial close processes in accordance with GAAP, ensuring accurate and timely reporting of financial results., • Prepare internal financial statements and supporting schedules for executive leadership., • Oversee daily accounting operations including Accounts Payable, Accounts Receivable, and General Ledger activities., • Ensure proper accounting treatment of distribution transactions, inventory activity, and project-related billing., • Work closely with project accounting and operations teams to track financial performance related to project shipments, stored materials, and customer billing milestones., • Develop and maintain strong internal accounting controls and financial procedures., • Coordinate external audits, tax filings, and financial reviews., • Ensure compliance with federal, state, and local tax regulations as well as industry-specific reporting requirements., • Lead and mentor accounting staff including AP, AR, and accounting personnel., • Establish departmental procedures, performance standards, and accountability structures to support accurate and efficient financial operations., • Maintain and improve accounting processes and standard operating procedures to support a growing distribution and project business., • Partner with leadership to improve financial visibility into inventory management, project profitability, and working capital efficiency. REQUIREMENTS: • Bachelor’s degree in Accounting, Finance, or related field, • CPA preferred, • 10+ years of progressive accounting experience, • Prior experience as Controller, Assistant Controller, or Accounting Manager, • Experience within electrical distribution, construction supply, building materials, or project-based businesses required or strongly preferred, • Experience with project accounting, construction-related billing, or large material project environments, • Strong knowledge of GAAP and financial reporting, • Experience with ERP systems and advanced Excel, • Understanding of project billing structures, stored material accounting, and distribution inventory accounting, • Strong analytical, leadership, and communication skills \nCompany Description A well established, growing firm serving the shipping industry. A well established, growing firm serving the shipping industry.

Job Description FLSA STATUS: Salary/Exempt DEPARTMENT: Research and Development SUPERVISOR: Engineering Manager DIRECT REPORTS: No Position Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Minimum Qualifications Education: • Bachelor's of Science in engineering or related field Experience: • 3-5 years of experience of design engineering or related field, • 2-5 years of electrical connector design experience Knowledge: • Ability to create 3D Computer-aided design (CAD) models and drawings, • Ability to read drawings, specifications, test procedures, etc., • Fundamental mathematical and physical principles, • Proficient in MS Office, • Geometric Dimensioning and Tolerancing (GD&T) Skills: • Good oral and written communication and presentation skills, • Great interpersonal skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Job Responsibilities • Assist with research and development, new product introduction, and production deployment., • Create CAD models, drawings, specification sheets, and prototypes for new and existing products utilizing Solidworks., • Modify existing products to improve efficiency and performance., • Design for manufacturability., • Research materials and production costs to determine manufacturing requirements., • Ensure product designs conform to customer and government specifications., • Test designs to ensure they meet safety, usability, and environmental impact standards., • Analyze data from tests and identify opportunities for improvement., • Collaborate with engineering, sales, procurement, and production teams., • Present designs and prototypes to customers and colleagues., • Create BOMs and routings for new products, legacy products, and engineering changes as necessary., • Develop and manage costing analysis as necessary during product development and deployment., • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system., • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc., • Manage projects, including budgets, schedules, and costs when applicable., • Perform DFMEAs, PFMEAs, and Risk Assessments., • Ensure that the company's designs and designing processes comply with all government laws and regulations., • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision making., • Collaborate with quality team to assure products are being produced to applicable specifications., • Evaluate quality control processes and make recommendations for improvements in quality control., • Devise procedures to inspect and report quality issues., • Assure the reliability and consistency of product manufacturing by checking processes and final output., • Facilitate proactive solutions by collecting and analyzing manufacturing data., • Document and optimize design procedures to ensure replicability and compliance with internal and external standards., • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis., • Assist in the preparation for quality audits., • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Other responsibilities, initiatives and ad-hoc projects as required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for prolonged periods of time, working at a computer, stand, bend, twist, and lift up to 25 lbs. The noise level in the work environment is usually low to moderate.

Job Description Construction Project Estimator – Lead Pre-Construction and Bid Management Job Overview • Salary/Pay Rate: $115,000 - $128,000 (Based on Experience)., • Location: Hauppauge, NY., • Job/Employment Type: Full-Time., • Project Scope: Commercial / Institutional ($5M to $30M+)., • Mandatory Licences & Certifications: None Required. The Opportunity You will take ownership of the pre-construction process by building precise, competitive estimates for commercial and institutional projects. Reporting to the Director of Pre-Construction, your analytical skill and trade insight will directly impact company profitability and fuel long-term growth. You will serve as a core leader in identifying risk, forging strong trade partner relationships, and driving winning bid strategies. How You Will Make an Impact • Prepare accurate, detailed material, labor, equipment, and subcontractor cost estimates from conceptual design through final bid documents., • Perform comprehensive quantity takeoffs across architectural, structural, civil, mechanical, electrical, plumbing, and fire protection scopes., • Evaluate subcontractor proposals, level competing bids, and identify scope gaps, exclusions, and assumption risks prior to submission., • Analyze drawings, specifications, addenda, and site logistics to identify constructability challenges and value-engineering opportunities., • Solicit and build strong working relationships with qualified vendors and specialty trade contractors across all divisions., • Present detailed bid packages, estimate summaries, and risk evaluations directly to executive management for final bid-day decisions., • Lead pre-construction handoff meetings with project managers to transfer bid assumptions, allowances, and budget commitments seamlessly. Required Qualifications & Experience • Proven track record in construction estimating with strong knowledge of commercial means, methods, and trade responsibilities., • Advanced ability to read and interpret complex architectural, civil, structural, and MEPS drawings and specifications., • Exceptional mathematical, analytical, and bid-leveling skills with high attention to detail., • Strong communication and negotiation skills required to manage vendor pricing, subcontractor outreach, and tight deadlines., • High proficiency using Microsoft Excel and estimating takeoff software platforms. Preferred Qualifications & Experience • 7-10+ years of construction estimating experience for a commercial General Contractor or Construction Manager., • Demonstrated experience estimating commercial and institutional projects in the $5M to $30M+ range., • Practical field construction experience and a background in conceptual budgeting or value engineering., • Proficiency with industry software including BuildingConnected, Procore, OST (On-Screen Takeoff), and MS Project or P6., • Bachelor's degree in Construction Management, Civil Engineering, Architecture, or related discipline. Compensation & Benefits • Competitive annual base salary commensurate with experience., • Comprehensive medical insurance plans., • Paid Time Off including holidays, vacation, and sick leave., • 401(k) Retirement Savings Program options with employer matching contributions., • Collaborative, entrepreneurial work culture with direct visibility to leadership. About Us We are a growing leader in general construction, specializing in unique commercial and industrial projects. We foster a supportive environment rooted in long-term partnerships, where hard work is recognized and careers are built through excellence and collaboration. We are an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description The Estimator is responsible for managing the electrical estimating process from beginning to end and producing comprehensive bid estimates for commercial construction projects. In this role, you will demonstrate your construction cost estimating techniques and knowledge in quantity takeoffs, as you complete the entire bid from the beginning to the completion of the tender. Key Responsibilities: • Produce accurate estimates of material and labor costs for the electrical element of the project., • Prepare and send out accurate electrical estimates and tender documentation., • Analyze all quotes received for electrical material and labor costs and efficiently utilize negotiation skills to achieve the best value., • Evaluate technical requirements and estimating costs to determine prices and margins of all electrical equipment., • Create estimates/quotations to potential customers - ensuring both the customer and business needs are met, and the forecast in line with requirements., • Work closely with Branch Manager, Subcontractors, Engineers and Development Managers during the estimating/tender process - building stable working relationships., • Utilize estimating software such as Accubid and Bluebeam., • Evaluate bid opportunities and liaise with potential clients, working within project deadlines to produce accurate electrical estimates., • Review and understand all project plans, requirements and specifications., • Review quotes and estimates with Branch Manager and Pre-Construction Manager to prepare recommendations for resolution of any project risks., • Identify and report escalation factors in the marketplace for specific materials and labor rates., • After submittal, actively compare and analyze competitive subcontract and supplier bids., • Ability to substantiate all aspects of final estimates. Qualifications • Proficient in estimating software., • Ability to estimate all types of projects., • Knowledge of standard electrical pricing, • Knowledge of NEC and local codes Requirements: • High School or GED., • 2-4 years work experience (5-10 years Preferred.), • Associates or Bachelor's Degree (Preferred). Work Environment: This job is fully in person, on site. Salary: $100,000 - $120,000 (DOE) Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance Equal Employment Opportunity HATZEL & BUEHLER provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, HATZEL & BUEHLER complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. HATZEL & BUEHLER expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of HATZEL & BUEHLER’s employees to perform their job duties may result in discipline up to and including discharge. Americans with Disabilities Act Applicants as well as employees who are or become disabled must be able to perform the essential job functions either unaided or with reasonable accommodation. The organization shall determine reasonable accommodation on a case-by-case basis in accordance with applicable law.

Job Description Join our Natural Organics Inc / Natures Plus Family! For more than 50 years, Natural Organics Inc. headquartered in Melville, NY has been the gold standard in natural vitamins and supplements. Marketing our products under the Natures Plus brand, we are committed to producing the finest, most effective formulations available. Our employees embody the true spirit of our Natures Plus brand. We have one goal... Bringing you high-quality products with the guaranteed potency you deserve! We are seeking an experienced Building Maintenance Supervisor to service our busy production and corporate Headquarters in the Melville area on Long Island, NY. Key Responsibilities include: Operations & Maintenance Management • Supervise the daily operations, preventive maintenance, and repair of building systems, including HVAC, electrical, plumbing, fire life safety, and BMS (Building Management Systems)., • Establish with Manager's assistance, a rigorous preventive maintenance schedule to minimize downtime and extend asset lifespans., • Diagnosing complex mechanical and electrical issues, providing technical guidance to onsite technicians. Team Leadership • Lead, mentor, and evaluate a team of onsite facility maintenance staff., • Oversee third-party contractors, janitorial staff, security personnel, • Coordinate shift schedules and manage emergency on-call rotations. Safety, Compliance. • Ensure the facility strictly complies with OSHA, local building codes, fire codes, and environmental regulations., • Conduct regular safety drills, building walkthroughs, and risk assessments to maintain a hazard-free work environment. Required Qualifications & Skills • Experience: Minimum of 5+ years of facility maintenance experience, with at least 2 years in a dedicated supervisory or team-lead capacity., • Education: High school diploma or equivalent required; an Associate's degree, technical trade school certification, or Bachelor's degree in Facilities Management or Engineering is highly preferred., • Technical Knowledge: Deep understanding of HVAC chillers, boilers, electrical grids, automated control systems (BMS), and fire suppression systems., • Certifications: Professional certifications such as FMP (Facility Management Professional), CFM (Certified Facility Manager), or relevant state trade licenses (HVAC, Electrical, or Plumbing) are a major asset., • Physical Requirements: Ability to walk large facilities, climb ladders, and lift up to 50 lbs. when necessary. Benefits: • Competitive salary, • Medical, Dental, Vision, Life Insurance, Aflac, Short- and Long-Term Disability, • 401(k) with company match, • Generous paid time off days and holidays, • Opportunities for professional development and growth, • Discounted vitamins and supplements Job Posted by ApplicantPro

Job DescriptionJoin a Meaningful Profession with Mercy Haven!Discover the difference between a job and a fulfilling career by becoming a vital part of Mercy Haven's mission. We are dedicated to providing homes and services to diverse populations in crisis, including those living with mental illness, homeless families, veterans, domestic violence victims and the elderly. Recognized as a Newsday Top Workplace on Long Island for three years, we invest in our employees' success and offer an excellent benefits package.In the Laborer/Painter (Per Diem) role, you will assist our maintenance team in providing our residents with safe, well-maintained Mercy Haven Residential Housing. Under the supervision of the Facilities Manager, you will assist maintenance mechanics as they perform a wide range of duties including landscaping, building repairs and maintenance, appliance repairs and maintenance, installing carpeting and flooring, and other duties as required. Previous experience painting and spackling preferred.Key ResponsibilitiesPhysical work is required including bending, stretching and lifting. Painting, spackling and wall repairs as well as assisting and supporting others in the overall maintenance of all Mercy Haven properties:Monitoring the buildings to ensure that they are maintained in safe, decent, and sanitary conditionsPerforming routine maintenance and household repairs, such as painting, minor wall repair, landscaping and power washing, stripping and waxing floors, tiling, and cabinet work, etc. Conducting building inspections as scheduled by Director of Facilities ManagementPreparing apartments and grounds for new tenantsTeaching residents and staff how to maintain appliances and groundsWorking with volunteers and residents, whenever possiblePerform minor and major repair to all buildings and equipmentPerform preventive maintenanceRepair/replace broken windows, doors, door locksFollow all safety rules and procedures as defined by Director of FacilitiesOn-call for emergencies and respond to emergency maintenance requests through on-call schedule Work occasional weekend day(s), throughout the year, as deemed necessaryAssume other duties as requiredPOSITION REQUIREMENTSTo be successful in this role, you should have proven experience in general maintenance, construction, or property management. You must have a high school diploma or equivalent and must be proficient with hand and power tools. You'll have working knowledge of basic plumbing, electrical systems, and carpentry. The position requires the physical ability to lift and move heavy items up to 125-200 pounds safely and perform physically demanding tasks.Strong attention to detail, the ability to troubleshoot issues, and good time management skills are essential. You should be comfortable working independently as well as collaboratively with a team. Familiarity with maintenance tracking software is preferred but not required. A valid driver's license and reliable transportation are necessary, as travel between properties is a routine part of the job.POSITION RELATIONSHIPSReports to: Facilities ManagerSupervises: NoneSCHEDULE: Per DiemPAY RANGE: $18.00 - $20.00 an hour, based on experienceLOCATION: Main Office in Islip Terrace, NYLearn more at mercyhaven.org!MERCY HAVEN IS COMMITTED TO A POLICY OF EQUAL EMPLOYMENT OPPORTUNITY AND WILL NOT DISCRIMINATE AGAINST AN APPLICANT OR EMPLOYEE ON THE BASIS OF RACE, RELIGION, GENETIC PREDISPOSITION, CREED, COLOR, NATIONAL ORIGIN, ANCESTRY, SEX, SEXUAL ORIENTATION, AGE, MARITAL STATUS, VETERAN STATUS, DOMESTIC VIOLENCE VICTIM STATUS, DISABILITY OR ANY OTHER PROTECTED CATEGORY UNDER APPLICABLE LAW Job Posted by ApplicantPro

Job Description Core Responsibilities: • Repairs: Conduct routine inspections, identify repair needs (including planned and emergency related repairs) and promptly address any issues related to the hotel's physical infrastructure, including fire/life safety, mechanical (HVAC, plumbing, controls), electrical (lighting, UPS, PDU, generators, primary switch gear), emergency backup systems and hot water system, high pressure boiler units, mechanical systems as well as all work associated with said repairs including relevant demolition, reconstruction, and cleaning of work area. Perform complex repairs, troubleshoot problems, and coordinate with external contractors when necessary., • Preventive Diagnostics and Repairs: Develop and implement a comprehensive preventive diagnostic program to ensure the optimal functioning of all equipment and systems within the Casino/ hotel. Regularly inspect and service equipment, follow manufacturer guidelines, and maintain accurate records of repair activities including all elements associated with diagnosis and repairs. Make recommendations to the Facilities Sr. Manager and Director for replacement should maintenance of equipment is nearing life cycle end or is becoming inefficient., • Safety and Compliance: Maintain a safe and secure environment for guests and employees by adhering to all relevant safety regulations, building codes, and industry standards. Conduct regular safety inspections, address potential hazards, and ensure the proper functioning of fire protection systems, emergency lighting, and other safety equipment. Work with Facilities Sr. Manager and Director to improve processes and develop industry leading safety protocols., • Team Collaboration: Collaborate closely with the hotel's management, operations, supervise outside contractors, as well as maintenance staff to address maintenance concerns, prioritize tasks, and provide technical support as needed. Foster a positive and cooperative work environment, encourage teamwork, and provide training and guidance to new staff members., • Record Keeping and Reporting: Maintain accurate records of diagnostic and repair activities, equipment inventory, and maintenance performed. Prepare regular reports on maintenance expenses, project updates, and equipment performance. Assist in budgeting processes by providing insights and recommendations related to engineering and maintenance needs. Utilize Management repair tracking hardware and software and input appropriate metrics as required., • Training: Proactively improve technical skills and stay up to date with new technology through training resources available both internally and externally as well as available through the IUOE training courses to maintain skill sets and licensing, if applicable. Work with leadership to develop Facilities Mechanic I team members to prepare them for more complex work., • Performing routine inspections around the building to identify potential issues such as structural damage, windows, and door issues., • Repairing broken or leaking plumbing to avoid water damage and restore full use of water fixtures including relevant demolition, reconstruction, and cleaning of project staging area as required., • Test and Diagnose the building heating equipment for possible repairs to keep climate control in the facility functioning properly., • Operation of relevant tools and machinery necessary to perform duties as directed. IUOE Facilities Engineers in this role performing work assignments in their course of duties shall perform minor tasks commonly performed by another craft in order to complete the major assignment. For illustrative purposes, such minor tasks include but are not limited to: removing conduit or electrical wiring once an electrician has made sure the power has been turned off during a major renovation assignment; touching up paint, installing molding, repair and painting of retaining walls, doorways, repair of HVAC vents, plumbing related work, as well as any cleanup and demolition required to commence and complete the work assignment. • All other duties as assigned. Qualifications/Requirements: • High school diploma or equivalent degree required., • Minimum of 3-5 years previous experience in general maintenance/repair for commercial facility required., • Must be able to obtain a New York State Gaming License. OTHER • Must have general knowledge of the use of equipment used in building trades., • Strong knowledge of building systems, including electrical, plumbing, HVAC, and mechanical systems., • Familiarity with applicable building codes, safety regulations, and environmental standards, • Ability to understand and follow OSHA guidelines., • Ability to stand, crouch, and climb to perform repairs, use ladders, and perform various types of manual labor., • Ability to lift up to 50 pounds., • Visual acuity sufficient for reading, performing repairs, and painting., • Weekends, Holidays, and swing shifts may be required., • Must be able to obtain a New York State Gaming License.

Job DescriptionDescription: Overview For over 75 years, Heatherwood has been dedicated to developing upscale residential rental communities, commercial properties, and luxury urban spaces. Our reputation for quality construction, innovative design, and exceptional service has made us a recognized leader in the industry. At Heatherwood, we believe our employees are our greatest asset, which is why we prioritize professional development and promote from within. Heatherwood is on a mission to create high-quality places that inspire a genuine sense of community. As a Lead Technician, you are the driving force in providing great service to our residents in a fast-paced, challenging, and rewarding environment. What You Bring to Heatherwood • A positive attitude, • A customer-first approach to service, • Safety-first mindset and adherence to all safety policies, • Ability to combine hands-on maintenance expertise with operational oversight and coordination, • Leadership-focused, team-oriented approach with the ability to motivate, support and effectively guide team members, • High attention to detail and accountability for quality and timeliness of work, • Proven track record of reliability, dependability, and sound judgment, • Strong commitment to completing time-sensitive tasks and managing priorities for the team, • Strong ability to quickly navigate, learn, and adapt to maintenance and property management software, • Strong written and verbal communication skills, • Openness to feedback and consistent communication with property leadership and management teams, • Minimum of 3+ years in a lead or supervisory maintenance role in multifamily, commercial, hotel, or similar environments, • Valid driver’s license Key Responsibilities • Knowledge of and compliance with company standards, policies, and procedures, • Maintains compliance with all Fair Housing standards in all resident interactions, • Maintain property standards for cleanliness, appearance, safety, and functionality, • Maintains a professional appearance at all times by practicing good personal hygiene and wearing a clean, presentable uniform., • Respond to service requests in a timely, professional, and customer-focused manner, • Oversee and manage preventative maintenance programs and scheduled inspections, • Assign, coordinate, and monitor maintenance tasks while providing hands-on support as needed, • Lead and oversee apartment turnover activities, including cleaning, painting, and repairs, • Flexibility to work overtime, on weekends, and participate in the emergency on-call rotation, • Train, coach, and mentor maintenance technicians on technical and administrative skill sets, • Serves as the primary support to the Maintenance Manager and assumes leadership responsibilities in their absence, including but not limited to payroll administration, scheduling, procurement, purchase orders and invoice processing, budget oversight, work order management, inspections, and operational tracking., • Provide real-time feedback to support professional development and performance management, • Support oversight of specialized systems such as sewer treatment plants and swimming pools (if applicable), • Maintain clear, consistent communication with property leadership and management teams, • Perform physical tasks including lifting up to 50 pounds, climbing, bending, kneeling, and standing for extended periods, • Participate in snow removal activities as directed by the management team, • This is not intended to be a complete list of all duties and responsibilities; duties may change based on business needs. Technical Knowledge • Advanced expertise in troubleshooting, repairing, and oversight of:, • Various HVAC systems, • Plumbing systems including boilers and water heaters, • Electrical systems, • Appliances, • Building envelope and structural design, • Pool Management (where applicable), • Waste Water Treatment Systems (where applicable), • Advanced ability to oversee building systems including fire sprinkler, fire alarm, and central mechanical/HVAC systems (as applicable), • Expert understanding of maintenance operations, work order management, preventative maintenance, and apartment make-ready processes Development & Training • Monthly safety training as part of Heatherwood’s Safety Culture, • Ongoing leadership, management, and advanced technical development, • Training and support for EPA Universal, CPR, CPO, Standpipe certifications (S95, S12, S13) where applicable, • Certifications including: EPA Universal, CPR, CPO, • Access to online training resources, • Internal growth opportunities Requirements:

Job Description Established in 1926, Family Service League is a social services agency transforming lives and communities through mental health, addiction, housing, and essential human services with more than 60 social service programs in over 20 locations. SCHEDULE: Monday-Friday 9:00AM-5:00PM Rotating On-Call Schedule SUMMARY: Family Service League is seeking a full-time Maintenance Worker for our large shelter located in Brentwood. Under supervision of the Maintenance Supervisor, the Maintenance Worker is responsible for the maintenance of the interior and exterior of property and grounds, in accordance with Suffolk County regulations. Responsible for repair and maintenance of all facility equipment and structure. RESPONSIBILITIES: • Prepare rooms for occupancy, including hanging sheet rock, spackle, painting, and routine maintenance., • Perform electrical and structural repairs or installations., • Perform mid-level plumbing duties: snake lines, remove and install toilets, and repair leaking pipes in ceilings, walls or under countertops., • Conduct regularly scheduled safety checks externally and internally throughout the building, including all equipment. Perform or schedule repairs as necessary., • Maintain the interior of the property by performing routine maintenance tasks, including removal and replacement of light bulbs and ceiling tiles, unclogging drains, drywall repair and painting., • Notify Property Manager timely of the need for repairs or replacement of equipment or furniture., • Perform heavy cleaning duties, including cleaning floors, shampooing rugs, washing walls and glass, and removing rubbish., • Maintaining the exterior of the property by blowing leaves, picking up trash and debris, sweeping, trimming, weeding, and removing snow and ice., • Participate in a rotating on-call schedule., • All other duties as assigned. QUALIFICATIONS: • High School diploma or GED required., • A minimum of 3 years’ experience performing building maintenance and repairs is required. This includes demonstrated experience in electrical, plumbing, spackle and paint, maintenance and repair of mechanical equipment, and groundskeeping., • Knowledge of the Suffolk County Department of Social Services requirements is preferred., • Proficiency in MS Office, especially Outlook is required. Knowledge of Facilities Management software preferred., • Ability to work independently and as part of a team required., • Strong verbal and written communication skills required., • OSHA training or certification strongly preferred., • Valid, clean, New York State Driver’s License required. PHYSICAL REQUIREMENTS: Must have the ability to pick up and carry a minimum of 50 lbs., be able to work overhead and on a ladder for sustained periods of time, and to bend and crouch to install flooring or seal tubs and toilets. Must be able to shovel snow from walkways. Must be able to go up and down stairs.

Job DescriptionDescription: Northeast Aero Compressor and PG Aerotech are seeking an experienced Facilities Technician II to help maintain the safe, compliant, and efficient operation of our 55,000 square foot FAA Part 145 certificated repair station and MRO facility in Hauppauge, NY. This is a mid-level, hands-on role for a technician who has moved beyond entry-level building maintenance and is ready to take on greater ownership of preventive maintenance programs, more complex mechanical and electrical troubleshooting, and vendor coordination — while continuing to perform daily hands-on repair and upkeep work. The Facilities Technician II reports to the Production Manager and works closely with them to keep all building systems, ground support equipment, and industrial machinery running reliably. Requirements: • Perform routine and corrective maintenance on HVAC, electrical, plumbing, lighting, and overhead door systems, escalating only the most complex issues to the Facilities Supervisor, • Execute scheduled Preventive Maintenance (PM) tasks and help maintain accurate maintenance logs, service records, and equipment histories in compliance with repair station requirements, • Diagnose and troubleshoot mechanical, electrical, and pneumatic/hydraulic issues on industrial equipment and aviation ground support equipment, • Assist in coordinating third-party vendors and contractors for specialized inspections, certifications, and repairs, • Perform general building maintenance including carpentry, painting, minor structural repairs, and groundskeeping/snow removal as needed, • Conduct routine facility and safety inspections, identify hazards or worn components, and proactively address or report them, • Support the cleanliness and organization of the facility, including production floor, offices, break rooms, restrooms, and grounds, • Help ensure fire and life-safety systems are functioning correctly and are tested/documented on schedule, • Operate company vehicles and material handling equipment (e.g., forklift) to move tools, parts, and supplies between areas or job sites, • Maintain compliance with FAA Part 145 repair station requirements, OSHA regulations, EPA standards, and applicable building codes, • Respond to maintenance requests from building occupants and prioritize/resolve issues promptly Experience and Skills • 2–5 years of experience in building/facilities maintenance, industrial maintenance, or a related mechanical/electrical trade; aviation, manufacturing, or regulated-facility experience preferred, • Working knowledge of HVAC, electrical, and plumbing systems, with demonstrated ability to independently troubleshoot and repair common issues, • Some exposure to industrial equipment such as compressed air systems, generators, or pneumatic/hydraulic equipment preferred, • Comfortable using hand and power tools safely and effectively, with strong mechanical aptitude and problem-solving skills, • Ability to work independently on assigned tasks while collaborating with the Facilities Supervisor on larger projects, • Strong communication and customer service skills when responding to occupant requests, • Ability to pass a pre-employment and random drug and alcohol screening as well as a background check Physical Requirements • Ability to lift at least 50 pounds, • Comfortable working at heights on ladders and lifts, and in confined spaces, outdoor environments, and varying temperatures, • Manual dexterity and ability to constantly manipulate small to medium components, • Ability to stand, walk, bend, and climb stairs for extended periods, • Frequent use of hand tools, power tools, and cleaning/lubricating/painting chemicals Education / Licenses / Certifications • High school diploma or GED required; trade school training or an associate degree in a mechanical, electrical, or facilities-related discipline preferred, • Valid state driver's license with a clean driving record required, • Forklift certification preferred, or ability to obtain within 30 days of hire, • OSHA 10-Hour (or higher) General Industry certification preferred, or willingness to obtain Compensation and Benefits • Full-time, hourly position: $28–$34 per hour, commensurate with experience, skills, and certifications, • This range reflects a mid-level role positioned between our entry-level Facilities Technician/Driver and our Facilities Supervisor, based on current Long Island / Hauppauge, NY market data for facilities and building maintenance technicians, • Medical, dental, vision, and life insurance options, • 401(k) with 100% match on the first 4%, • Paid holidays, vacation, and sick/personal leave accrued from date of hire, • Training/education budget, gym reimbursement, complimentary drinks, company events, and philanthropy opportunities

Job Description Core Responsibilities: • Repairs: Conduct routine inspections, identify repair needs (including planned and emergency related repairs) and promptly address any issues related to the hotel's physical infrastructure, including fire/life safety, mechanical (HVAC, plumbing, controls), electrical (lighting, UPS, PDU, generators, primary switch gear), emergency backup systems and hot water system, high pressure boiler units, mechanical systems as well as all work associated with said repairs including relevant demolition, reconstruction, and cleaning of work area. Perform complex repairs, troubleshoot problems, and coordinate with external contractors when necessary., • Preventive Diagnostics and Repairs: Develop and implement a comprehensive preventive diagnostic program to ensure the optimal functioning of all equipment and systems within the Casino/ hotel. Regularly inspect and service equipment, follow manufacturer guidelines, and maintain accurate records of repair activities including all elements associated with diagnosis and repairs. Make recommendations to the Facilities Sr. Manager and Director for replacement should maintenance of equipment is nearing life cycle end or is becoming inefficient., • Safety and Compliance: Maintain a safe and secure environment for guests and employees by adhering to all relevant safety regulations, building codes, and industry standards. Conduct regular safety inspections, address potential hazards, and ensure the proper functioning of fire protection systems, emergency lighting, and other safety equipment. Work with Facilities Sr. Manager and Director to improve processes and develop industry leading safety protocols., • Team Collaboration: Collaborate closely with the hotel's management, operations, supervise outside contractors, as well as maintenance staff to address maintenance concerns, prioritize tasks, and provide technical support as needed. Foster a positive and cooperative work environment, encourage teamwork, and provide training and guidance to new staff members., • Record Keeping and Reporting: Maintain accurate records of diagnostic and repair activities, equipment inventory, and maintenance performed. Prepare regular reports on maintenance expenses, project updates, and equipment performance. Assist in budgeting processes by providing insights and recommendations related to engineering and maintenance needs. Utilize Management repair tracking hardware and software and input appropriate metrics as required., • Training: Proactively improve technical skills and stay up to date with new technology through training resources available both internally and externally as well as available through the IUOE training courses to maintain skill sets and licensing, if applicable. Work with leadership to develop Facilities Mechanic I team members to prepare them for more complex work., • Performing routine inspections around the building to identify potential issues such as structural damage, windows, and door issues., • Repairing broken or leaking plumbing to avoid water damage and restore full use of water fixtures including relevant demolition, reconstruction, and cleaning of project staging area as required., • Test and Diagnose the building heating equipment for possible repairs to keep climate control in the facility functioning properly., • Operation of relevant tools and machinery necessary to perform duties as directed. IUOE Facilities Engineers in this role performing work assignments in their course of duties shall perform minor tasks commonly performed by another craft in order to complete the major assignment. For illustrative purposes, such minor tasks include but are not limited to: removing conduit or electrical wiring once an electrician has made sure the power has been turned off during a major renovation assignment; touching up paint, installing molding, repair and painting of retaining walls, doorways, repair of HVAC vents, plumbing related work, as well as any cleanup and demolition required to commence and complete the work assignment. • All other duties as assigned. Qualifications/Requirements: • High school diploma or equivalent degree required., • Minimum of 3-5 years previous experience in general maintenance/repair for commercial facility required., • Must be able to obtain a New York State Gaming License. OTHER • Must have general knowledge of the use of equipment used in building trades., • Strong knowledge of building systems, including electrical, plumbing, HVAC, and mechanical systems., • Familiarity with applicable building codes, safety regulations, and environmental standards, • Ability to understand and follow OSHA guidelines., • Ability to stand, crouch, and climb to perform repairs, use ladders, and perform various types of manual labor., • Ability to lift up to 50 pounds., • Visual acuity sufficient for reading, performing repairs, and painting., • Weekends, Holidays, and swing shifts may be required., • Must be able to obtain a New York State Gaming License.

This Jobot Job is hosted by: Merwan Zattam Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $110,000 - $135,000 per year A bit about us: We exist to make better buildings faster. We are part of a larger framework - Design Manufacture Construct (DMC) - that guide building design so that construction can leverage manufacturing productivity. We’re made up of smart architects, engineers, manufacturers, programmers, and other generalists that are united by the notion that to make great things intelligently is a worthy pursuit. We are seeking a talented and energetic Architects to join our design group. Job description: As a Program Architect, you will work with project teams in a dynamic, rapid-growth work environment with bright and talented engineers, architects, designers, builders, crafters, and manufacturers to improve and deploy a prototype building program and to build an alternative to the traditional construction industry. From desk to factory floor to job sites and client meetings, you will be challenged to develop your skills in a new field, taking a critical role in project delivery via the DMC methodology Why join us? We offer the full spectrum of comprehensive benefits including: health, dental, and vision insurance. We also offer flexible spending accounts, paid time off, short term disability, long term disability, life insurance and a 401k plan. Job Details MEP Engineering Manager Position Overview The MEP Engineering Manager is responsible for leading and managing a multidisciplinary team of mechanical, electrical, and plumbing engineers responsible for the design, coordination, and execution of building systems across multiple construction and manufacturing projects. This role provides technical leadership, ensures engineering quality and compliance, and drives collaboration across design, manufacturing, and construction teams to deliver efficient, high-performing building systems. The ideal candidate brings strong leadership experience, deep technical expertise in MEP systems, and a proven ability to manage complex projects within fast-paced design-build or manufacturing environments. Key Responsibilities Leadership & Team Management Lead, mentor, and develop a team of MEP engineers, designers, and technical specialists. Establish engineering standards, workflows, and best practices across MEP disciplines. Manage team workload, project assignments, and resource planning. Support professional development and performance management initiatives. Engineering Design & Technical Oversight Provide technical leadership for mechanical, electrical, plumbing, and fire protection system design. Review and approve engineering calculations, drawings, and specifications to ensure accuracy and compliance with applicable codes and standards. Oversee system integration and coordination across building systems and disciplines. Ensure designs support constructability, manufacturability, and operational efficiency. Project Delivery & Coordination Collaborate with architectural, structural, manufacturing, and construction teams to support project execution. Participate in project planning, scheduling, and design phase coordination. Support design-build and modular/offsite construction workflows. Provide technical support during procurement, fabrication, installation, and commissioning phases. Assist with resolving field issues, RFIs, and design modifications. Quality, Compliance & Continuous Improvement Ensure compliance with industry codes, regulatory requirements, and internal engineering standards. Implement quality assurance and quality control processes for engineering deliverables. Identify opportunities for system standardization and continuous improvement. Support development of engineering documentation, specifications, and design libraries. Stakeholder & Client Engagement Serve as a technical liaison between internal teams, clients, contractors, and external engineering partners. Participate in design reviews and technical presentations with stakeholders. Support value engineering initiatives and cost optimization strategies. Required Qualifications Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related engineering discipline. 8+ years of experience in MEP engineering, building systems design, or related field. 3+ years of leadership or team management experience. Strong knowledge of building systems including HVAC, power distribution, plumbing, fire protection, and controls systems. Experience supporting design-build, industrial, healthcare, or commercial construction projects. Strong understanding of applicable codes, standards, and regulatory requirements. Experience coordinating multidisciplinary engineering teams. Strong problem-solving, organizational, and communication skills. Preferred Qualifications Professional Engineer (PE) license strongly preferred. Experience in modular, offsite, or prefabricated construction environments. Experience with healthcare or mission-critical facility design. Familiarity with commissioning processes and building performance validation. Experience working with BIM and building systems modeling tools. Experience leading engineering teams supporting manufacturing or production environments. Technical Skills MEP system design and analysis BIM and design coordination platforms Building and energy code compliance Construction documentation and submittal review Engineering quality assurance and standardization Cross-functional design and construction coordination Leadership Competencies Ability to lead and inspire technical teams Strong collaboration and communication skills Strategic thinking and process improvement mindset Ability to manage multiple projects and priorities Strong focus on quality, safety, and operational performance What Success Looks Like Delivery of high-quality, code-compliant MEP designs across projects Effective coordination between engineering, manufacturing, and construction teams Improved engineering efficiency and standardization Successful mentoring and development of engineering staff Reliable system performance and client satisfaction Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Ready to accelerate your career while helping our customers move forward? As a Utility Technician at Penske, you'll do exactly that. Here, you'll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. Whether you're looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you. Why is this job awesome? For starters, no day is the same. You'll get to work on lots of different types of equipmentnot just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Working alongside experienced supervisors and master technicians, we'll teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are getting the industry certified training you need to succeed and grow your career. You'll learn from the best in the industry. We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team. • Making sure vehicles are maintained and safe for our customers, • Using Penske's tools and technologies to log, research and complete repairs, including basic vehicle diagnostics, • Doing preventative maintenance repairslike replacing or rotating tiresand completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles, • Partnering with your manager to learn new skills using Penske's technician training and hands-on coaching, • Working on other projects and tasks as assigned by supervisor, • Competitive starting salary- $30.08, • Shift Premiums( 2nd shfit $2.00 & 3rd shift $3.00), • Career stability, • Opportunity for growth, • Excellent benefits, including lots of time off, • Strong, well-rounded training on a variety of OEM equipment (Penske's Technician Certification Program is certified as a Continuing Automotive Service Education provider), • Advanced vehicle maintenance technology, • Location and schedule flexibility, • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred, • Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred), • Valid driver's license, • The ability to solve problems and comfort using tools, • Excellent customer service skills and communication skills, • The ability to work well as part of a team and outside, • Basic computer skills, • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management, • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice., • Regular, predictable, full attendance is an essential function of the job, • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review., • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required, • This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. The associate must be able to work safely at heights using applicable ladders and elevated working platforms. The associate must be able to safely work in all weather conditions. Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. Penske is an Equal Opportunity Employer Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success.

Certifications: Professional certifications such as FMP (Facility Management Professional), CFM (Certified Facility Manager), or relevant state trade licenses (HVAC, Electrical, or Plumbing) are a major asset. We are seeking an experienced Building Maintenance Supervisor to service our busy producti

Job Description Maintenance Technician Position Summary The Maintenance Technician is responsible for performing day-to-day maintenance, repairs, and general upkeep of multi-tenant commercial office buildings across a portfolio of properties. This position works closely with Property Managers, Building Superintendents, vendors, and other maintenance staff to ensure properties are safe, well-maintained, and operating efficiently. The ideal candidate is hands-on, dependable, responsive, and capable of working independently while providing a high level of service to our tenants. Essential Job Functions • Perform day-to-day maintenance and repairs at multiple commercial office buildings within an assigned portfolio., • Respond promptly and professionally to tenant service requests and work orders., • Utilize the company's property management/work order software to review, respond to, update, and close tenant service requests in a timely manner., • Perform general maintenance and repairs involving plumbing, electrical, carpentry, doors, locks, hardware, fixtures, and other building components., • Assist with the operation, inspection, troubleshooting, and general maintenance of building HVAC systems, including rooftop units and central HVAC systems., • Assist with and develop working knowledge of Building/Energy Management Systems., • Identify building maintenance issues and communicate necessary repairs or concerns to the Building Superintendent and/or Property Manager., • Perform routine inspections of building common areas, mechanical spaces, exterior areas, and other property components., • Assist vendors and contractors while working on-site and provide access to building and mechanical areas as needed., • Maintain clean, safe, and organized mechanical rooms, maintenance areas, workshops, and storage rooms., • Assist with preventative maintenance programs and scheduled building maintenance., • Complete assigned tasks efficiently and within established timeframes., • Travel between multiple building locations throughout the workday as required., • Establish and maintain positive, professional relationships with tenants, vendors, Property Managers, and other staff., • Respond to emergency maintenance situations as needed, including after-hours emergencies., • Perform additional building maintenance duties and special projects as assigned. Position Requirements • Minimum 3–5 years of commercial building maintenance experience preferred., • Working knowledge of commercial HVAC, plumbing, electrical, and general building systems., • Strong mechanical and troubleshooting skills., • Valid New York State Driver's License and reliable transportation., • Ability to use a personal vehicle to travel between multiple properties during the workday., • Ability to work independently and as part of a maintenance/property management team., • Self-starter with strong organizational and time-management skills., • Ability to prioritize and manage multiple work orders and maintenance responsibilities., • Strong customer service and communication skills., • Ability and willingness to learn new building systems, equipment, and maintenance procedures., • Basic computer and mobile device skills, including the ability to use work order/property management software. Physical Requirements • Ability to stand and walk for extended periods throughout the workday., • Ability to frequently bend, climb, kneel, reach, and work in mechanical and maintenance areas., • Ability to safely lift and carry 50+ pounds., • Ability to use ladders and perform work at various heights when required., • Ability to work indoors and outdoors in varying weather conditions. Schedule & Emergency Response This is a full-time position. The Maintenance Technician must be available to assist with building emergencies and after-hours maintenance situations as required. Flexibility may be necessary for scheduled maintenance, tenant needs, and emergency conditions outside of normal business hours. \nCompany Description Damianos Realty Group LLC, founded in 1968, is a successful family-owned and operated commercial real estate company specializing in cutting-edge office, medical, retail, industrial and land development. The company has created thriving projects throughout Long Island, with locations in Smithtown, Patchogue, Port Jefferson Station, St. James, Stony Brook, Shirley, Islandia, Babylon, Medford, Center Moriches, Hauppauge and Uniondale, NY. Damianos Realty Group LLC, founded in 1968, is a successful family-owned and operated commercial real estate company specializing in cutting-edge office, medical, retail, industrial and land development. The company has created thriving projects throughout Long Island, with locations in Smithtown, Patchogue, Port Jefferson Station, St. James, Stony Brook, Shirley, Islandia, Babylon, Medford, Center Moriches, Hauppauge and Uniondale, NY.

Position Purpose: Customer Service/Sales associates provide fast, friendly service by actively seeking out customers to assess their needs and provide assistance. These associates learn about products using our tools, and provide information to customers in order to sell an entire project. Associates in this position will learn how to greet, qualify, recommend and close every customer in their department, and know how to handle basics in adjacent departments. Customer Service/Sales associates maintain the in-stock condition of assigned areas, and ensure it is clean, shop-able, and safe. Each associate has the responsibility of providing a safe working and shopping environment by following all safety policies & standards, completing specified safety training, immediately correcting hazards & unsafe conditions or reporting conditions to the Manager on Duty, and working safely as not to endanger themselves, co-workers, vendors, or customers. These associates work in cooperation with their Department Supervisor and other associates in their department as well as other departments. Specific store departments may include Building Materials, Dcor, Electrical, Flooring, Garden, Hardware, Kitchen & Bath, Lumber, Millwork, Paint, Plumbing and Tool Rental. The Customer Service/Sales position types may include Department Sales, Lead Generator, Pro Account Sales, Sales Specialist, Special Services, and Customer Order Specialist.

Job Description Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role As Warehouse Manager, you will be responsible for leading the Warehouse Associates in accurate receiving, storing, picking, and shipping of product to meet company standards of accuracy, attention to details, sanitation, safety, security, and productivity. What You’ll Do: • Manage Warehouse/Logistics Team, • Ensure and track that productivity targets are met and that all warehouse processes are running smoothly, efficiently, promptly and following our company's standard operating procedures., • Manage daily warehouse operations to include receiving, shipping, inventory and logistics., • Manage warehouse and materials being staged for projects, • Load and unload trucks, • Receive and count stock items and record data, • Operate materials handling equipment with proper training, • Store items in an orderly and accessible manner in warehouse, • Mark stock items using identification tags, stamps, electric marking tools, or other labeling equipment Who We Are Looking For • 5+ year of Warehouse, Distribution, Logistics experience, ability to lift 50 pounds, • Proven Leader with readiness to actively participate in all warehouse activities, • Bachelor’s degree in Supply Chain, Business or Operations Management or related field preferred, • Forklift certified, wire cutting experience a plus, • Strong decision making and problem-solving skills, • Supervisory Experience, • Good mobility and ability to spend most of the day in a warehouse standing and walking, • Basic Computer skills, • Experience with electrical distribution/industrial distribution preferred What We Offer We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation, • Employee negotiated discounts Who We Are Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website www.turtle.com or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Atlanta, Georgia, United States Real people. Real service. At SupplyHouse.com, we value every individual team member and cultivate a community where people come first. Led by our core values of GENEROSITY, RESPECT, INNOVATION, TEAMWORK, and GRIT, we're dedicated to maintaining a supportive work environment that celebrates diversity and empowers everyone to reach their full potential. As an industry-leading e-commerce company specializing in HVAC, plumbing, heating, and electrical supplies since 2004, we strive to foster growth while providing the best possible experience for our customers. We are opening a new fulfillment center in Atlanta, GA and are looking for a General Manager to join our growing Fulfillment Center network. This individual will report to our Senior Director of Fulfillment and will be responsible for leading the establishment and day-to-day operations of our new high-volume facility. This individual will oversee all aspects of site performance, ensuring customer orders are processed accurately, efficiently, and on time, with a strong focus on safety, quality, productivity, cost control, and employee engagement. As the leader of our brand-new fulfillment center, this individual will play a critical role in building the leadership team, implementing processes, preparing the site for launch, and creating a strong foundation for long-term success. We're looking for someone who is passionate about leading people, energized by the opportunity to build something from the ground up, and committed to operational excellence. Job Type: Full-Time, Exempt Location: McDonough/Locust Grove area of Atlanta, GA Schedule: This role oversees our new Atlanta, GA fulfillment center. While this position generally follows a schedule, operational demands during peak and seasonal periods may require leaders to work additional hours beyond their regular schedule. Leaders are expected to maintain a flexible schedule and adjust their working hours as needed to support the business and their teams. Travel: This position requires travel to our headquarters in Melville, NY up to 3 times per year for internal meetings, leadership development, and team building activities. Additionally, please note that for the first 6 to 9 months of this role, the selected individual will be required to travel to our other fulfillment centers for onboarding and training. We reimburse reasonable and necessary business travel expenses. Salary: $145,040 $181,300 per year Responsibilities: • Oversee all processes and procedures for all inbound, outbound, inventory control and facility operations, • Ensure the teams are staffed appropriately to operate at peak efficiency and complete all assigned tasks daily, • Manage the work performance of each member of the leadership team to ensure productivity standards and KPI metrics are consistently being met, • Identify, lead, and support continuous improvement initiatives that drive customer service, accuracy, and productivity efficiencies while reducing operating cost, • Determine the root cause of process opportunities, addressing issues and piloting resolutions to standard, • Support the Senior Director of Fulfillment in the standardization of the overall operations of the fulfillment center, • Partner and communicate with management/leadership to ensure alignment of objectives, problem solve, provide operational updates, and develop new operational procedure and strategies, • Build a high-performing leadership team through coaching, mentoring, succession planning, and talent development, • Deliver performance reviews and conduct monthly check-ins with each member of the leadership team to establish rapport and provide feedback, • Address performance related incidents that arise and recommending a course of action on all disciplinary and personnel issues, • Train and develop fulfillment leadership through coaching, mentoring, and effective communication to develop a strong culture of employee engagement, • Attend and participate in the HR and cross-functional meetings, • Create and promote a safe working environment for all employees while developing a safety culture in which an employee feels safe and comfortable in their areas of responsibility, • Lead by example and maintain professional standards in the workplace Requirements: • Bachelor's degree in a related field, • 7 years of applicable experience in warehouse, fulfillment, or distribution management, with direct oversight of multiple teams or departments, • 3 years of managerial experience, • Understanding of distribution flow, operational systems, integration, and automation, • Proven ability to analyze KPIs and develop data-driven strategies to improve performance and employee engagement, • Strong background in process improvement, including identifying workflow inefficiencies and implementing scalable solutions, • Fundamental understanding of inventory, supply chain and logistics concepts, • Proficiency with Microsoft Office applications (especially Word, Outlook, and Excel), • Strong critical thinking skills with the ability to see the "big picture" and identify/forecast developing issues, • Strong problem-solving, time management, multitasking, attention to detail, and interpersonal skills, • Exceptional verbal and written communication skills with the ability to influence and align with executive leadership, while also connecting effectively with frontline associates, • Proven track record of achieving operational goals related to productivity, accuracy, and cost efficiency, • Ability to work independently, multitask and follow process and standard procedures Preferred Qualifications: • Experience working in an automated warehouse environment, including experience with a Tier 1 warehouse management system (WMS), conveyor systems, and robotics Why work with us: • We have awesome benefits We offer a wide variety of benefits to help support you and your loved ones. These include:, • Comprehensive and affordable medical, dental, vision, and voluntary life insurance options, • 401(k) with up to 4% company match, • Paid vacation, sick time, and holidays, • Company-paid life insurance and long-term disability, • Discounted auto, home, and pet insurance programs, • Flexible Spending Account (FSA), • Confidential mental health, financial planning, and legal support through our Employee Assistance Program (EAP), • $750 annual professional development budget, • LinkedIn Learning membership, • Company rewards and recognition program, • And more!, • We empower ownership We all contribute to our success and we all share in it. Our Ownership for All program ensures each SupplyHouse team member will benefit financially from the company's growth and accomplishments., • We promote work-life balance We value your time and encourage a healthy separation between your professional and personal life to feel refreshed and recharged. Look out for our monthly catered lunches, team building activities, out-of-office events, and Micro Markets to keep you energized!, • We support growth We strive to innovate every day. In an exciting and evolving industry, we provide opportunities for career growth through our annual merit and bonus opportunities, hands-on training, internal mobility options, professional development budget, and LinkedIn Learning membership., • We give back We live and breathe our core value, Generosity, by giving back to the trades and organizations around the world. We make a difference through donation drives, employee-nominated contributions, support for non-profit organizations, and more., • We listen We value hearing from our employees. Everyone has a voice, and we encourage you to use it! We actively elicit feedback through our annual feedback groups, regular 1:1 check-ins, employee listening initiatives, and company-wide ideas form to incorporate suggestions and ensure our team enjoys coming to work every day. Check us out and learn more at https://www.supplyhouse.com/our-company ! Additional Details: • Applicants must be currently authorized to work in the U.S. on a full-time basis. SupplyHouse.com will not sponsor applicants for work visas., • SupplyHouse.com is an Equal Opportunity Employer, strongly values inclusion, and encourages individuals of all backgrounds and experiences to apply for this position., • To ensure fairness and trust in our hiring process, we ask that all application materials, assessments, and interview responses reflect your own thinking and perspective. You may use AI tools to assist in preparing your responses, as long as this use is clearly disclosed and you can speak authentically to your ideas and work. Our focus is on honesty, judgment, and how you approach problem-solving. We appreciate your transparency and look forward to learning more about your skills., • We are committed to providing a safe and secure work environment and conduct thorough background checks on all potential employees in accordance with applicable laws and regulations., • All emails from the SupplyHouse team will only be sent from an @supplyhouse.

Implements and executes capacity and capability management under the guidance of the Engineering Manager. Ensures effective workflow by engaging with cross functional leads and customers in order to understand scope of projects and technical needs to assign resources effectively. Responsible for driving process improvements to ensure financial results are achieved. Typically supports local members of a team but may support remote employees in other locations. Drives a high performing team by managing the performance and development of team members. Operates effectively in the UL matrix to actively support and drive high performance culture changes, transformation efforts and people engagement. Holds team and self accountable for results, assists engineering Manager in defining goals and performance objectives and metrics to execute strategy. Develops and coaches by providing, training, career counseling, feedback, guidance to drive high performance and morale. Ensures understanding of and compliance with all established policies and requirements. Increases customer loyalty, anticipates customer needs and provides proactive solutions. Gathers, shares and responds to customer feedback. Coaches and mentors employees to do the same. Supports sales by building relationships with customers, requiring a deep understanding of what is in pipeline, obtaining feedback on how UL can do better, what is working well and identifies actions and solutions. Provides direct support to customers and team by providing technical guidance and engineering judgment to complete projects and address all issues arising needing resolution (i.e. customer complaints, unusual requests, technical advice). Ensures quality and adherence to policies and standards requirements. Leads and/or participates in discussions to drive business initiatives through brainstorming discussions. Empowers and holds team accountable to find new opportunities to effectively drive growth & financial goals (revenue, profit, enterprise value, etc. ). Delegates Project Handlers to establish the appropriate test programs. Supports and guides project handlers to ensure compliance with requirements, changes in project scope or specifications and customer notifications. Explains UL family of company's policies, procedures and requirements, negotiates completion dates and sample requirements, and ensures an effective experience with the UL family of companies. May handle some projects and/or act as lead reviewer to support workflow and demand. Communicates and exemplifies ULs Vision and Mission. Leads, promotes and embraces change through self and team. Collaborates and builds trust within the organization and with customers to meet or exceed their expectations. Develops strong, flexible cross-functional networks and global relationships to promote becoming the fastest, highest quality and most customer-friendly organization. Coaches and mentors employees to do the same. Read and follow the Underwriters Laboratories Code of Conduct and follow all physical and digital security practices. Performs other duties as directed. Bachelor's degree in Engineering. 3+ years of experience in testing, inspection, and certification (TIC) or product certification. Experience in power, energy, wiring, electrical distribution, or similar industries preferred. Prior leadership experience preferred. Proficiency in Microsoft Office. Strong communication and ability to work with internal and external stakeholders. Customer-facing experience preferred. Strong decision-making and problem-solving skills. Ability to coach and mentor a team. What we offer: Total Rewards: We understand compensation is an important factor as you consider the next step in your career. The estimated salary range for this position is $107,500-$143,300 and is based on multiple factors, including job-related knowledge/skills, experience, geographical location, as well as other factors. This position is eligible for annual bonus compensation with a target payout of 20% of the base salary. This position also provides health benefits such as medical, dental and vision; wellness benefits such as mental and financial health; and retirement savings (401K) commensurate with the standard rewards offered in each individual location or country. We also provide full-time employees with paid time off including vacation (15 days), holiday including floating holidays (12 days) and sick time off (80 hours). A global leader in applied safety science, UL Solutions (NYSE: ULS) transforms safety, security and sustainability challenges into opportunities for customers in more than 110 countries. UL Solutions delivers testing, inspection and certification services, together with software products and advisory offerings, that support our customers' product innovation and business growth. The UL Mark serves as a recognized symbol of trust in our customers' products and reflects an unwavering commitment to advancing our safety mission. We help our customers innovate, launch new products and services, navigate global markets and complex supply chains, and grow sustainably and responsibly into the future. Our science is your advantage. We work at the center of safety and sustainability we're helping to tackle the worst aspects of the global climate crisis with projects in electrical infrastructure, renewable energy and electrified transportation. Whether we're helping customers make safer electric vehicle batteries or debating the impact of wind farms, we develop cutting-edge safety science. And we do it in some of the largest and best-equipped laboratories in the world. We're always looking for people to help us explore, experiment and advance ideas that change the way the world works. Join our team and help create a cleaner, safer future for all. Job Identification 10323 Job Category Engineering Degree Level Bachelor's Degree Job Shift Day Locations Melville, NY, United States Northbrook, IL, United States Raleigh, NC, United States

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: CONSTRUCTION PROJECT MANAGER JOB RESPONSIBILITIES: • Read and interpret Architectural and MEP design documents., • Prepare comprehensive scopes and RFPs, • Knowledge of general construction, carpentry, electrical, mechanical systems a must, • Estimate projects, • Create comprehensive project schedules, manage, and maintain schedules, • Execute subcontractor bidding including the development of Scopes of Work, Bid Lists, and Unit Cost Bid Comparisons, • Review subcontract bids and issue contracts, • Collaborate with Owner and/or Owner’s Representative on schedule, requisitioning and critical project issues, • Create and manage incoming and outgoing correspondence, RFI’s, Change Orders, etc., • Prepare and follow project budgets, • Prepare AIA payment application documents, • Work with local building department, obtain necessary permits, and coordinate project close out with building and engineering officials, • Manage construction scheduling and sequencing, anticipate long lead items, and recognize critical paths, • Manage and administrate all Change Orders, • Schedule and attend progress visits, • Provide daily project updates and pictures for each projectJOB REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Minimum 5 Years-experience in Construction Project Management., • Construction Management or Related Degree or Related Experience, • Willing to travel, • A thorough and complete knowledge of the construction process and management techniques, methods, and materials. BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations, • 401(k) retirement plan with generous company match Powered by JazzHR h2ehswoyCs

Job DescriptionDescription: Job Title: Project Manager (Lab Casework / Furniture, Architectural Millwork) Department: Project Management Operations Reports To: Director of Project Management About Us: Lab Crafters is the premier manufacturer of laboratory furniture systems, casework, seating, fume hoods, and custom solutions for the life sciences, biotechnology, and higher education. Our mission is to create state-of-the-art laboratory environments by providing innovative products and solutions tailored to support emerging and changing scientific processes and technology. Position Summary: The Project Manager acts as the liaison between the Company and its Customers. They are responsible for the overall delivery and success of their assigned projects by proactively and successfully managing, planning, and coordinating activities within specified cost and time demands. The Project Manager needs to manage multiple projects and activities simultaneously and must be organized and utilize effective time management strategies. The Project Manager will need excellent written and verbal communication skills as they interact with executives, contractors, architects, engineers, customer end-users and tradesmen. (Laboratory Casework, Furniture, Architectural Millwork) Minimum Background, Experience, and Requirements: 4-year bachelor's degree in Construction Management, Engineering, Architecture, Business Management, or similar field of study. 3+ years of experience in project/account management roles in construction/architectural manufacturing company, dealership, or installation company Proficient in MS Office software suite Must be able to read, understand and interpret construction documents, including specifications, architectural and MEP drawings. Understand the basics of mechanical, electrical, and plumbing assemblies. Advanced knowledge of these topics is a plus Strong organizational skills Knowledge of VISUAL ERP, AutoCAD and Builder-trend software is a plus Reliable, good work ethic, and high integrity. Requirements: Tasks / Responsibilities: • Review projects with Architectural Drafting/Engineering, Layout, Purchasing, and Sales to understand and meet all the customer expectations., • Take ownership of the project at notice of award and author all correspondence throughout the project life., • Work with the manufacturing production team to develop the production schedule, financial billing plan and set project priorities., • Oversee the Architectural Drafting/Engineering translation of the project requirements, as they may be determined through the contractual plans and specifications as well as the internal estimates and sales commitments., • Communicate the project fulfillment progress to customers on a regular basis, including attending job site meetings., • Create detailed project completion schedules including submittals, procurement, production, delivery, and installation., • Oversee the document control process for RFI’s, submittal drawings and product data (prepared by the assistant project manager)., • Optimize cost effectiveness of project deliveries and installation., • Manage all aspects of change orders (coordinate the processing and execution), from schedule impact analysis to maximizing revenue for each opportunity that may present itself., • Review existing project financials to reconcile all charges to ensure proper reporting of cost by project., • Ensure the processing of final payment is complete and accurate by working with Finance., • Troubleshoot problems in the field with installation trades., • Oversee the project close-out and completion of project punch list., • Maintain customer satisfaction and company profitability. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO STATEMENT: Lab Crafters, Inc. is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, genetics, or other characteristic protected by law. Sponsorship is not available for this position Job Type: Full-time Benefits: 401(k) + matching Medical, Dental Vision Health insurance Life insurance Paid time off

Job DescriptionDescription: About Us: Lab Crafters is the premier manufacturer of laboratory furniture systems, casework, seating, fume hoods, and custom solutions for the life sciences, biotechnology, and higher education. Our mission is to create state-of-the-art laboratory environments by providing innovative products and solutions tailored to support emerging and changing scientific processes and technology. Job Title: Project Manager (Lab Casework / Furniture, Architectural Millwork) Department: Project Management Operations Reports To: Director of Project Management Position Summary: The Project Manager acts as the liaison between the Company and its Customers. They are responsible for the overall delivery and success of their assigned projects by proactively and successfully managing, planning, and coordinating activities within specified cost and time demands. The Project Manager needs to manage multiple projects and activities simultaneously and must be organized and utilize effective time management strategies. The Project Manager will need excellent written and verbal communication skills as they interact with executives, contractors, architects, engineers, customer end-users and tradesmen. (Laboratory Casework, Furniture, Architectural Millwork) Minimum Background, Experience, and Requirements: 4-year bachelor's degree in construction management, Engineering, Architecture, Business Management, or similar field of study. 3+ years of experience in project/account management roles in construction/architectural manufacturing company, dealership, or installation company Proficient in MS Office software suite Must be able to read, understand and interpret construction documents, including specifications, architectural and MEP drawings. Understand the basics of mechanical, electrical, and plumbing assemblies. Advanced knowledge of these topics is a plus Strong organizational skills Knowledge of VISUAL ERP, AutoCAD and Builder-trend software is a plus Reliable, good work ethic, and high integrity. Salary Range: $75K-$110k annually. The pay range for this position is approximate. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to knowledge, skills and abilities. Requirements: Tasks / Responsibilities: Review projects with Architectural Drafting/Engineering, Layout, Purchasing, and Sales to understand and meet all the customer expectations. Take ownership of the project at notice of award and author all correspondence throughout the project life. Work with the manufacturing production team to develop the production schedule, financial billing plan and set project priorities. Oversee the Architectural Drafting/Engineering translation of the project requirements, as they may be determined through the contractual plans and specifications as well as the internal estimates and sales commitments. Communicate the project fulfillment progress to customers on a regular basis, including attending job site meetings. Create detailed project completion schedules including submittals, procurement, production, delivery, and installation. Oversee the document control process for RFI’s, submittal drawings and product data (prepared by the assistant project manager). Optimize cost effectiveness of project deliveries and installation. Manage all aspects of change orders (coordinate the processing and execution), from schedule impact analysis to maximizing revenue for each opportunity that may present itself. Review existing project financials to reconcile all charges to ensure proper reporting of cost by project. Ensure the processing of final payment is complete and accurate by working with Finance. Troubleshoot problems in the field with installation trades. Oversee the project close-out and completion of project punch list. Maintain customer satisfaction and company profitability. EEO STATEMENT: Lab Crafters, Inc. is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, genetics, or other characteristic protected by law. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Sponsorship is not available for this position Benefits: 401(k) + matching Medical, Dental & Vision insurance Life insurance Paid time off Job Type: Full-time Work Location: Remote

Job Description Overview SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. Responsibilities Basic Function - This position is involved with facility maintenance duties and customer interface. Previous experience is preferred, but not required in all positions. Individual must be able to perform with minimum supervision. Other duties may include: equipment service and general housekeeping tasks. • Perform all maintenance and cleaning tasks noted in the checklists and as directed by the facility manager/supervisor to ensure that all dirt, dust, litter and debris is removed from all areas of the facility using brooms, mops, brushes and other hand tools., • Walk garage daily to note and correct any maintenance problems., • Sweep and pick up around the entrances and exits to the garage and stairwells as well as clean surface area rails, etc. on all levels, the booth, the office and rest rooms., • Empty all trashcans in the garage, the booth and the office., • Paint any and all areas of the facility as directed by the facility manager/supervisor to ensure that all painted surfaces such as poles, signs, doors, walls, curbs, islands, gates, etc. are properly maintained and look neat and clean., • Replace burned out bulbs., • Apply oil absorbent to oil spills., • Submit requests for repairs or maintenance., • Check conditions of safety items, such as gate arms to ensure clearance bars are secure., • Check ticket spitters and gates daily for proper operations, ticket supply, accuracy of time on clock and general appearance., • Provide ticket and record gate counters to the Manager., • Keep an inventory of janitorial supplies., • Maintain a garage/lot sweep sheet., • Operate automatic sweepers, scrubbers, outdoor equipment such as weed eater, lawnmowers or other electrical tools to repair or construct items, as applicable., • Shovel, plow or blow snow from the entrance or exit ramps and in areas designated by the Facility Manager using shovels, snow blowers and other light duty equipment., • Report any unknown, observed or suspected violations of company policy, safety hazards or any unusual occurrence to the Facility Manager in a timely manner., • Practice the Three Keys to Customer Satisfaction including the Five Customer Service Behaviors to ensure successful customer interactions., • Assist customers within the facility or as directed by the Facility Manager/Supervisor., • Resolve customer complaints independently or with the aid of a supervisor., • Be familiar with all aspects of the operation and cover other duties including cashier, attendant, etc. on an as needed basis., • Maintain a neat and clean appearance and arrive and remain complete uniform before and during scheduled shifts., • Perform other duties as assigned. Qualifications Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High School Diploma or a combination of experience and education. May require facility maintenance, electrical and or painting experience and or skills training depending on the job assignment and facility. License Requirement: The individual will only be required to have and maintain a valid state-issued driver’s license, with a current address and acceptable driving record, if the individual is expected to be able to drive a company vehicle or drive on company business. Availability to Work: Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 3rd shift and/or week-ends may be a requirement. Oral Communication: Speaks clearly; Listens and gets clarification; Responds well to questions. Written Communication: Writes clearly and informatively; Able to read and interpret written information. Customer Service: Maintains positive attitude. Responds to requests for service and assistance. Adaptability: Adapts to changes in the work environment; Able to deal with change, delays, or unexpected events. Judgment: Exhibits sound and accurate judgment. Professionalism: Reacts well under pressure. Language Ability: Ability to read, write and interpret the English language. Ability to respond to common inquiries or complaints from customers. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands and fingers and to communicate with customers and fellow employees. The employee is frequently required to sit; reach with hands and arms; stand or walk for long periods of time (up to 8 hours). The employee is also frequently required to climb, balance, stoop, kneel, and crouch. In addition, the employee is required to of twist, turn, stretch, and bend on a frequent basis. The employee must be able to lift and move 50 pounds or more regularly. The employee must be able to move in a relatively quick manner. Specific vision abilities required by this job include Close vision, Peripheral vision and Ability to adjust focus. Ability to withstand working with dust, chemicals and other possible irritants and work in extreme weather conditions (rain, snow, cold, heat). Salary Range: $17.00 hr This role is eligible to earn tips in addition to the posted hourly rate. Benefits: Eligible employees will participate in the various benefits plans including medical, dental, vision, flexible spending accounts, long/short term disability, life insurance, accident insurance, 401k and paid time off. SP+ is an equal opportunity employer committed in policy and practice to recruit, hire, train, and promote, in all job classifications, without regard to race, color, ancestry, religion, sex, age, national origin, citizenship status, marital status, sexual orientation, veteran status, gender identity, disability or other classes protected by federal or state law. SP+ does not tolerate harassment or retaliation against any employee or applicant based on these characteristics or because the individual exercised their EEO rights. Right to Work Poster SP+, a Metropolis Company, may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate’s application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, SP+ retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. If you are an applicant to a New York City job posting and wish to request an alternative selection process accommodation or have questions about our data retention policy, please contact Recruit@spplus.com. We are here to assist you.

Job Description Field Repair Technician Field Repair Technician – Helium Leak Detection Instruments & Systems Location: Ronkonkoma, New York Department: Service Reports To: Service Manager Position Summary Vacuum Instruments Corporation (VIC) is seeking a motivated and hands-on Service Technician to install, troubleshoot, repair, calibrate, and maintain helium leak detection instruments and custom leak testing systems at customer facilities throughout North America. This position requires strong mechanical aptitude, electrical troubleshooting skills, and the ability to work independently while delivering outstanding customer service. Technicians receive extensive product training and work with advanced leak detection technologies used in the automotive, aerospace, medical device, HVAC, semiconductor, and industrial manufacturing industries. Service technicians typically earn 30–40% above their base salary through overtime and travel compensation. Essential Responsibilities • Install, commission, and validate helium leak detection equipment and automated leak testing systems., • Perform preventive maintenance, diagnostics, repairs, and calibration of leak detection instruments., • Troubleshoot electrical, mechanical, pneumatic, and vacuum systems., • Analyze system performance and identify root causes of equipment issues., • Read and interpret electrical schematics, wiring diagrams, mechanical drawings, and technical documentation., • Conduct functional testing and verify equipment performance after repairs., • Train customer personnel on proper operation and basic maintenance of equipment., • Prepare accurate service reports documenting work performed and recommendations., • Communicate technical findings to customers and internal engineering and service teams., • Maintain service tools, calibration equipment, and company vehicle., • Follow all company safety policies and customer site safety requirements., • Support equipment installations and startup projects at customer facilities. Qualifications Required • Associate degree or technical training in Electronics, Electrical Technology, Mechanical Technology, Mechatronics, Industrial Maintenance, or a related field, or equivalent experience., • Strong mechanical and electrical troubleshooting skills., • Ability to use electrical test equipment such as multimeters., • Ability to read electrical and mechanical drawings., • Good computer skills (Microsoft Office and Windows-based software)., • Excellent communication and customer service skills., • Valid driver's license and acceptable driving record., • Ability to lift up to 50 pounds., • Ability to work independently and manage multiple service assignments. Preferred • Experience servicing industrial equipment., • Experience with vacuum systems, pumps, or leak detection equipment., • PLC troubleshooting experience., • Pneumatic and electro-mechanical troubleshooting., • Industrial manufacturing or field service experience., • Knowledge of mass spectrometry or helium leak testing (training provided if needed). Travel Requirements • Travel approximately 50–70%, primarily within US., • Overnight and weekend travel is expected depending on customer schedules., • Flexibility to work overtime and weekends when supporting customer installations or emergency service calls. Physical Requirements • Frequently stand, bend, kneel, and work around industrial equipment., • Lift and carry equipment weighing up to 50 pounds., • Work in manufacturing environments while following all required PPE and safety procedures., • Ability to work from ladders or elevated platforms when necessary. What We Offer • Competitive base salary, • Significant overtime and travel earnings, with technicians typically earning 30–40% above their base salary, • Comprehensive technical training, • Health, dental, and vision insurance, • 401(k) with company match, • Paid vacation and holidays, • Company-paid travel expenses, • Company laptop, phone, and service tools, • Career growth opportunities within a global technology company Experience: • Vacuum Leak Detection: 2 years (Preferred), • Field Manufacturing Engineering Repair : 3 years (Required), • Helium : 2 years (Required), • Industrial maintenance: 3 years (Preferred) Willingness to travel: • 50% (Preferred) Work Location: In person

Job DescriptionAltus Fire & Life Safety is a full-service fire and life safety services platform. We offer a complete suite of solutions, from the design, engineering, installation, and servicing of state-of-the-art fire and life safety systems to training, consulting, crisis management and business continuity services. Croker Fire Drill Corporation, located in Hauppauge, NY is looking for an Account Manager to join our team! The Account Manager is primarily responsible for generating and closing service-related sales opportunities. This is a high-touch role requiring proactive engagement, clear communication, and cross-functional coordination to ensure exceptional service delivery and long-term customer satisfaction. We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our team members. Salary Range: $50,000 - $55,000ResponsibilitiesJob Duties & Responsibilities: • Develop and update Fire Safety and Emergency Action Plan documents., • Collaborate with Field Representatives to deliver an overall positive customer experience., • Responsible for keeping current clients satisfied and delivering exceptional client service., • Request information/documentation from clients to assist them with outstanding deficiencies and code compliance., • Provide assistance with violations., • Ensure timely completion of all deliverables., • Deliver client-focused solutions based on customer needs., • Compose and produce business correspondence., • Answer Office Phones - respond promptly to requests for assistance and inquiries.Required SkillsQualifications & Skills:, • High School Diploma or equivalent, • 2+ years’ experience in inside sales, account management, customer service, or service coordination, ideally in a technical, plumbing, electrical, construction, or fire/life safety environment., • Proficiency in CRM systems (NetSuite preferred), as well as Microsoft suite of products., • Highly organized, deadline-driven,, • Demonstrated ability to deliver high-touch customer service with empathy, attention to detail, and responsiveness., • Excellent written, verbal, and virtual communication skills.

Job Description General Responsibilities: Perform a variety of inspections on materials, precision machined components and electrical-mechanical assemblies to ensure compliance with requirements. Use a wide assortment of measuring instruments including hand tools and gauges, vision system equipment. Prepare quality documentation for final shipments per customer requirements. Specific Duties: • Ability to use inspection gauging and equipment to ensure conformance to all visual and dimensional drawing requirements. Gauging includes but not limited to; calipers, micrometers bore mics, depth, pin, thread and snap gauging. Operate equipment such as; profilometer, optical comparator, Keyence visual measurement system, height gauge, microscope, smart scope, etc., • Perform incoming and receiving inspection to specified requirements., • Perform inspection of finished details and assemblies to specified requirements., • Enter inspection results into a variety of data collection tools and databases., • Inspection of Soldered and brazed assemblies. Candidate requires internal certification for solder inspection., • Keep accurate records and maintain quality documentation., • Perform inventory movement transactions in the ERP system and ensure traceability of product., • Understand the non-conforming material process to ensure control of material., • Work and communicate with Quality, Supplier Quality, Engineering, and Manufacturing in a clear professional manner., • Write clear material rejection reports that contain problem statements, dimensions, and data., • Retrieve test data from databases and assemble documentation packages to ship with the product., • Use of ERP System in order to retrieve quality requirements and perform tasks related to moving product in system., • Perform tasks as assigned by the Inspection department Supervisor or Quality Manager., • Support the Company Quality Policy, • Generate FAI documentation to supply to customers with shipments as needed. Qualifications: Required Skills • Ability to read, and use micrometers, calipers, heigh gage and other measuring instruments, • Ability to read, and understand engineering drawings and related technical documents, • Working knowledge of Geometric Dimensioning and Tolerance (GD&T) principles and their application, • Basic Statistical Process Control and Statistical Fundamentals, • Experienced with ERP systems, • Strong planning and organizational skills, • Detail oriented, • Good interpersonal skills, • Strong verbal and written communication skills, • Strong math skills, • Visual Acuity mandatory (ability to visually identify color variations and capsule / tablet irregularities), • Flexible availability with regards to shift assignments when necessary, • Competent Microsoft Windows-Office and EXCEL applications Physical Requirements • Ability to lift, push or pull packages of up to 40 lbs., • Ability to work standing for long periods. Desired Skills • Basic Statistical Process Control and Statistical Fundamentals, • Minimum 3 years in a precision manufacturing or machining environment, • Experience with computer software like; Statistical Software, Access, advanced Excel Education and Experience: • Minimum education is High School Diploma, • Associates or higher in Technical Discipline/Trade preferred, • Minimum 3 years in a precision manufacturing or machining environment Compensation: $20.00 - $30.00 per hour based on experience GW Lisk is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.