Electrical manager jobs in Yonkers, New YorkCreate job alerts

Job Description Active Condominimum Complex in Northern Jersey is looking for an experienced Handyman who has a professional appearance and good communication skills. Some computer knowledge and ability to use a cell phone is required. Must have basic knowledge (should be familiar) in electrical, plumbing/ toilet snaking, lock installation, and some carpentry and cleaning skills. Must be able to monitor move-in and move-outs. Monitor/greet vendors that come on site. Summer task include monitoring pool chemicals, opening/closing pool. Doing projects onsite as asked to perform like painting, trimming some plants, cleaning gym equipment. Winter tasks include snow shoveling the sidewalk and by entrance doors (landscaper does plowing). This candidate must be able to follow direction from the property manager and have a cooperative demeanor to work well with the current on-site super. In return, this full-time the Handyman will get a salary and a one-bedroom rent-free apartment and free electricity (not including cable and no cell phone service). Requirement: a 30-day probation period is needed as a trial basis before being accepted to take on the super's position and prior to moving in. The work week (Mon-Fri) is forty hours a week and the pay is $17.50hour This also includes a rent-free apartment. This position requires the candidate to be on-call for emergencies in this complex 24-hrs a day.

Job Description Field Service Technician Requirements: • Associates Degree in Mechanical, Electronic Technology or similar, accepting non degreed professional with commeasurable experience, Technical School graduate (Electrical/Mechanical background), • Experience working with electro-mechanical equipment is a plus, • Ability to read basic electrical schematics is a plus Field Service Representatives must possess a strong work ethic, high energy level, excellent communication skills, and willingness to travel approximately 50% of the time nationwide, with occasional international travel. This is a salaried position with additional compensation for travel on behalf of the company and its customers. Primary Responsibilities: • Assist customers on-site with equipment start-up, • Train customer operators on-site in the use of equipment, • Repair or replace problematic or failed components on-site as necessary, • Approve warranty replacements as per equipment warranty stipulations, usually requiring factory verification, • Follow up on the last field service visit with customers to ensure all is well, • Test completed weigh feeders, water treatment, and other equipment prior to shipment, • Provide telephone and other types of assistance to customers, • Assist Electrical Production in testing completed control panels, • Write follow-up letters/memos to customers, reviewed by the Field Service Manager and possibly Sales prior to mailing, • Investigate unusual problems experienced in the field with applicable in-house personnel, • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member, • To be a part of a well-established team that values hard work, innovation & knows the value of its people, • Coaching and mentoring, helping team members realize their potential, aiding in defining goals and executing them, • We have an aggressive growth strategy, making way for ample advancement opportunities to transition into operations and/or direct management, • Competitive base package, • Continuous training - we are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success Looking forward to getting to know you... We, and our clients, are equal opportunity employers and consider all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Project Manager – Mechanical / HVAC Our client, a growing leader in mechanical, HVAC, and energy-efficiency projects across New York City is seeking an experienced Project Manager to join a hands-on, operations-driven team. This firm is a Licensed Master Plumber, Oil Burner Installer, General Contractor, and Con Edison Multifamily Partner. Their work spans oil-to-gas conversions, CHP systems, boiler installations, re-pipes, heating controls, monitoring systems, energy-efficiency retrofits, and emergency service for residential and commercial buildings. If you're looking for a place where your experience will be recognized and your impact will be felt, this role offers a strong platform for growth. What You’ll Do As a Project Manager, you will oversee mechanical and HVAC installation projects from planning through completion. Responsibilities include: • Lead and support an Assistant Project Manager (APM)., • Review project plans, bid documents, scopes of work, and budgets., • Develop and maintain project schedules to ensure on-time delivery., • Obtain necessary permits, inspections, and signoffs., • Schedule, coordinate, and supervise installation crews and subcontractors., • Track budgets, labor, and material usage to meet financial targets., • Manage the full contract scope and ensure all items are completed., • Prepare and estimate project change orders; coordinate approvals with clients., • Work closely with vendors and suppliers for equipment and services., • Attend project meetings with architects, engineers, customers, and city agencies., • Coordinate site access with building management and property teams., • Build and maintain strong relationships with customers and project partners., • Provide end-user training on equipment following project completion., • Maintain all project logs, spreadsheets, and documentation. What You Bring • 5+ years of experience in construction project management with a focus on mechanical or HVAC installations., • Strong knowledge of boiler systems, steam and hydronic heating, domestic hot water systems, pumps, gas/fuel systems, mechanical code, plumbing, and basic electrical., • Experience with hydronic boilers, cooling systems, chillers, fans, and controls is a plus., • Familiarity with project management software (Asana, BuildOps preferred)., • Excellent written and verbal communication skills., • Highly organized, detail-oriented, and proactive, with strong follow-through., • Ability to make independent decisions and keep projects on track., • Engineering background is a plus — Engineers are encouraged to apply. If you’re ready to join a team where your expertise matters and your career can grow, we’d love to hear from you.

Job Description JOB TITLE: SCATTERED SITE MECHANIC /DRIVER DEPARTMENT: HOUSING PROGRAMS FLSA: NON - EXEMPT LOCATION: YONKERS SALARY: $18 - $21 per hour SUMMARY: Responsible for the performance and delivery of quality services to Westhab properties. These services include, general repairs in plumbing, electrical, painting and plastering, as well as changing locks and repairs to appliances. Reports to the Facility Manager. Proof of COVID-19 vaccine is required. DUTIES AND RESPONSIBILITIES: • Complete work orders assigned by Supervisor., • Complete apartment turnover repair/upgrade of scattered site units., • Trouble shoot and make repairs to minor electrical, plumbing issues, • Consult with Scattered Site Supervisor on status of repairs needed for units, • Assist with the preparation of scope-of-work for units, • Prepare daily field reports and communicate to Supervisor of repairs needed., • Maintain good communication between clients/tenants and staff, • Respond to emergencies and participate with on-call rotation, • Be part of the in-house snow team High School diploma or equivalent required. Minimum two years experience as a mechanic; apprentice skills with the ability to perform repairs on doors, plumbing work, and carpentry required. Must have a clean, valid NYS driver’s license. Good verbal and written communication skills required. AGENCY PROFILE & EMPLOYEE EXPECTATIONS: Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards. Powered by JazzHR EQqWU0aQtE

Job Description JOB DESCRIPTION JOB TITLE: Maintenance Technician FLSA: Non-exempt DIVISION: Services-Facilities REPORTS TO: Facility Manager LOCATION: Various, NYC SALARY: $21.63 per hour SUMMARY: The Maintenance Mechanic, under the direction of the Facility Manager, performs all necessary interior and exterior facility repairs, including plumbing, electrical, HVAC, and carpentry work, of a NYC DHS contract shelter facility. The mechanic keeps the facility in good working order using troubleshooting techniques and performing repairs as needed. This position requires good judgment and understanding of industry standard repairs, code requirements and worker safety. Position may require some evening and weekend hours. Proof of Covid-19 vaccination is required. DUTIES AND RESPONSIBILITIES: ● Escorts outside contractors, vendors and inspectors and accepts deliveries as needed. ● Responsible for all repairs not requiring a licensed contractor. ● Troubleshooting and repair (light electrical and plumbing work) of outlets, switches, light fixtures, drain lines, sinks, tubs and toilets. Clears plumbing stoppages. ● Performs HVAC troubleshooting and servicing including cleaning units and replacing filters. ● Makes repairs to damaged sheetrock, including finish work/painting. ● Makes adjustments/minor repairs to windows, doors and locks. ● Assembles/repairs/ installs room furniture. ● Repairs any damage to client rooms, furniture and fixtures. ● Responsible for all mechanical work on unit turnovers. ● Completes work orders for occupied client rooms. ● Reports all negative building conditions to the Facility Manager. ● Performs other duties as assigned. EXPERIENCE AND QUALIFICATIONS: High School Diploma or GED with ability to communicate (written and verbal) in English is required. Minimum of two years of repair/mechanical experience is required, including carpentry, painting, plumbing and electrical. Must have good math skills, Trade/Technical school training is a plus. Knowledge of local NYC laws regarding building maintenance is preferred but willingness to learn is essential. Must be able to lift, push or pull 50 lbs. AGENCY PROFILE & EMPLOYEE EXPECTATIONS: Westhab is the premier organization of our kind in our region, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard-working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards.

Job Description JOB TITLE: SCATTERED SITE MECHANIC DEPARTMENT: HOUSING PROGRAMS FLSA: NON - EXEMPT LOCATION: YONKERS SALARY: $18 - $21 per hour SUMMARY: Responsible for the performance and delivery of quality services to Westhab properties. These services include, general repairs in plumbing, electrical, painting and plastering, as well as changing locks and repairs to appliances. Reports to the Facility Manager. Proof of COVID-19 vaccine is required. DUTIES AND RESPONSIBILITIES: • Complete assigned work orders and return to Warehouse Clerk., • Assist with apartment turnover repair/upgrade of scattered site units., • Trouble shoot and make repairs to electrical, plumbing and HVAC systems, • Consult with Lead Mechanic on status of repairs needed for units, • Assist with the preparation of scope-of-work for units, • Prepare daily field reports and communicate to Lead Mechanic of repairs needed., • Maintain good communication between clients/tenants and staff, • Respond to emergencies and participate with on-call rotation High School diploma or equivalent required. Minimum two years experience as a mechanic; apprentice skills with the ability to perform repairs on doors, plumbing work, and carpentry required. Must have a clean, valid NYS driver’s license. Good verbal and written communication skills required. AGENCY PROFILE & EMPLOYEE EXPECTATIONS: Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards. Powered by JazzHR vIMEnm3yW6

Job Description Reporting to the Maintenance Supervisor or other Manager, the HVAC Mechanic “A” will lead the daily operation of the HVAC/R shop at the College. This position will be responsible for the ongoing temperature control and comfort of the heating and cooling systems at the College to support academic, lab, administrative, and specialized HVAC/R systems. POSITION SUMMARY Responsibilities include, but are not limited to: • Installs, operates, maintains, and repairs complex HVAC/R systems including water and oil pumps, water analysis and chemical treatment systems, air compressors, pneumatic, electrical and mechanical controls, refrigeration, heating, cooling and ventilating equipment, filters, condensers, cooling towers, evaporators, and heat exchangers., • Responds to HVAC system complaints, performs troubleshooting of systems and provides feedback to Supervisors and Managers on progress., • Plans and performs preventative maintenance tasks for College HVAC/R systems to optimize system performance and energy efficiency., • Installs electric power, piping, controls and duct work to replace, maintain or to install new equipment., • Maintains logs, checklists, and prepares written reports to Supervisor, as appropriate., • Enters information into the College’s Computerized Maintenance Management System (CMMS) to document all work, parts used, system conditions, hours worked, and leverages system data., • Ensures compliance with all safety standards, buildings codes, and environmental regulations., • Leverages Building Automation and Building Management Systems (BAS/BMS) to prioritize, document, and improve system performance and facility comfort., • Monitor and oversee College and contractor staff, as needed., • Attends training sessions and meetings to stay current on all trade, College, and regulatory requirements, • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Reports to the College during closures and assists with snow and ice clearing operations, as needed., • Performs any other duties or task as may be assigned. SPECIAL SKILLS AND QUALIFICATIONS Education: High School diploma or equivalent required. Vocational School education or an appropriate apprenticeship preferred. Completion of a Journeyman level training program in HVAC/R or associate’s degree in HVAC/R Experience: • Minimum of Six years’ experience maintaining and repairing sophisticated commercial and industrial air conditioning systems including electric/pneumatic controls, fume hoods, high capacity centrifugal refrigeration equipment and roof top units., • Must be EPA Certified Universal Technician in accordance with Section 608 to handle CFCs, HCFCs, and HFCs, • Must have NJ Blue Seal Refrigeration, • Additional state or local licenses and certifications is a plus, • Experience working in an inclusive, collaborative, and respectful team setting. Knowledge, Skills and Abilities: • Demonstrates knowledge of facility operations, maintenance, and industry standards., • Knowledge of power and hand tools, chemical handing procedures, and associated safety protocols., • Knowledge of computerized building automation systems and building managements systems., • Proficiency with Microsoft Office Suite and Google business suite experience preferred., • Provides excellent customer service to students, faculty, and staff., • Excellent organizational, prioritization, time management, and communication skills., • Experience with computerized maintenance management systems (CMMS) preferred., • Interprets and understands blueprints, schematics, wiring diagrams, and layouts., • Reviews projects and capital improvement scopes of work to identify opportunities for improvement., • Prolonged periods walking, standing, bending, stretching, pushing, pulling, climbing ladders, or kneeling on uneven surfaces, • Physically able to operate powered equipment and tools, • Must be able to lift up to 50 pounds at a time, • Able to work in unconditioned, noisy, dimly light, confined, and odorous spaces, including the ability to work in variable and sometimes extreme weather conditions such as rain, snow, storms, heat, cold, and other weather indigenous to the area, • Must be able to wear personal protective equipment (PPE) for prolonged periods of time, • Must be able to climb a ladder and work at heights for extended periods of time Salary and Benefits • Annual Salary is $65,000-$80,000, • NJ Educator's Health Plan with Free Dental and Vision. NJ State Pension Plan., • 13 vacation days, 15 sick days, 4 personal days, 2 floating holidays, all designated holidays and 5 non-designated holidays a year. 3 Partial Sick Days. Bergen Community College provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Job Title: Automotive Technician / Mechanic (B Tech) Location: Full Time, Larchmont, NY Compensation: $27-47$/hr plus full benefit package (day one) We want you to be a part of our team — not just for a job, but for a long-term career. We're committed to investing in your growth, helping you build your skills, and supporting your professional development every step of the way. As a key player in our success, you’ll work with some of the largest fleet companies in America and gain hands-on experience with our 209 unique vehicle models. Join us and grow your future with a company that believes in your potential. Flexcar is completely reimagining car ownership. We offer the world’s first month-to-month car lease, with insurance and maintenance included. Members can swap cars anytime as their needs change, without the commitment or hassle of traditional car ownership. By combining operational expertise with technology, data, and AI, we’re transforming every aspect of the customer journey and delivering a more affordable, flexible, and hassle-free alternative to buying or leasing. Under minimal supervision, performs all processes necessary to complete basic mechanical and cosmetic repairs on fleet vehicles following Flexcar policies and procedures. The "B" Level Service Technician has the responsibility of understanding and completing routine repairs necessary for the repair of customer vehicles. This individual will perform general repairs and diagnoses with minimal assistance. These repairs include but are not limited to light engine work, brake systems, drive shafts, electrical systems, interior trim and entertainment components, exterior body panels and components, HVAC systems, steering & suspension systems, and any other repair as assigned by site management. What You’ll Love about this Role: * Being a core member of the site team – our customer safety depends on you! * Being part of an automotive company that recognizes talent – where you can make a difference. * We are growing quickly – which means your career can grow quickly with us too! What You’ll Do: * Identify, order, and maintain correct supplies and parts in order to properly service vehicles. * Understand how to properly use hand tools, chemicals, and all shop equipment. * Make accurate use of the return inspection information on each vehicle * Document all work performed and recommended on assigned repair order * Communicate with service manager or site management when additional work is needed or if repairs cannot be completed within the promised time * Conduct road test to determine work needed and to confirm work was successfully completed when necessary and practical * Perform all levels of diagnosis and repair on vehicles * Perform all levels of preventive/routine maintenance services * Utilize product and technical training as assigned by site management * Participate in sponsored training programs and schools to continuously expand your knowledge of new technology * Complete the work, notations and time-keeping necessary to the successful completion of all repair orders. * Report to management any situation or condition that would jeopardize the safety, welfare, or integrity of the site, its customers, or employees * Take care to ensure that all vehicles are returned to the lot as clean as they were prior to being serviced * Understand and complete required training for compliance with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. * Comply with all federal, state and local laws, as well as company policy, regarding safeguarding all vehicles, property and information What Drives Success for this Role: * ASE certifications heavily preferred * Previous automotive technician experience required * Must have great technical and mechanical skills * Must be a team player and have the ability to work repetitively on complex tasks * Provide support to other associates and managers as needed. * Perform all work within standardized cycle times * Flexibility to workdays, evenings, weekends and/or holidays. * Willingness to work in varying weather conditions. * Ability to carry tools and supplies up to 75lbs. * Valid driver’s license and an acceptable driving record (per company standards) * 2+ years of automotive repair experience is preferred. * At least 18 years old What tops the tank: * Rest & Relax! Potential to accrue 80 hours of PTO your first year, and up to 120 hours in later years plus multiple company paid holidays and 40 hours of Sick time. * Save for Your Future! 401(k) with company match from day one of hire * Benefits: Excellent, low-cost healthcare coverage including: medical, dental, vision, eligibility day one. Wellness Programs, Flexible Spending Accounts, Health Savings Account, Life and Disability Insurance * Drive a Flexcar! Discounted employee rate on Flexcar products and no annual membership fee * Weekly Pay and Employee Referral Bonus * Uniforms * Tools and Education: Reimbursement for ASE certifications and yearly tool allowance paid directly to you. Disclaimer: This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and may be amended at any time at the sole discretion of the Employer. Flexcar is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Flexcar provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Flexcar is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Flexcar provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR jRqEL4xeft

Job DescriptionSystems Integration Engineer Direct Hire Opportunity We are recruiting on behalf of our client, a leading manufacturing company, for a Systems Integration Engineer to join their Engineering team. This is a direct hire, full-time position offering excellent growth opportunities. Position OverviewThis engineering position offers an excellent entry point or advancement opportunity. The role involves exposure to various engineering tasks across all project phases, including field work. The successful candidate will work as part of the Test Equipment group and participate in diverse engineering projects while learning products, design concepts, company operations, and industry practices. This is a heavy field work role requiring travel and variable hours according to business needs - it is not a desk job and it is not 9am-5pm. Key Responsibilities • Resolve engineering issues in system integration and manufacturing aligned to project schedules, • Work with System Functions, Functional Interfaces, Electrical/Mechanical Interfaces, Asset Management, and Test Equipment, • Analyze and evaluate electrical schematics, mechanical drawings, pneumatic diagrams, test procedures, and technical documentation, • Plan solution paths and coordinate tasks with multidisciplinary engineering teams, • Generate and maintain asset management documents and official correspondence, • Track project progress and coordinate actions with suppliers and customers, • Participate in technical meetings, witness tests, and document meeting minutes with action items, • Support on-site testing activities, troubleshooting, and field modifications, • Provide engineering support to other departments across all project phases and manufacturing, • Coordinate technical activities with project management groups, • Lead technical discussions in design review meetings, • Provide elevated support for engineering headquarters by offering technical interpretations and faster response solutionsQualificationsEducation:, • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related engineering/science field, • Master's degree preferredExperience:, • Entry level (1-3 years) to mid-level (5-10 years) engineering experience, • Transportation industry or closely related field experience required, • Experience in system design, systems integration, or project engineering a plus, • Professional Engineer (PE) certification a plusRequired Skills & Competencies, • Practical knowledge in both electrical and mechanical engineering, • Strong problem-solving abilities for both technical and non-technical issues, • Excellent written and verbal communication skills, • Strong schedule management and task management capabilities, • Team player with collaborative mindset, • Commitment to multi-year projects, • Willingness to travel domestically and internationally for business, • Availability outside normal business hours when required, • Experience with federal regulations and official standards (AAR, APTA, IEEE, ASME, EN, MIL, etc.) Employment Details, • Position Type: Direct Hire, Full-time, • Salary: $85,000-95,000 (DOE), • Classification: Exempt, • Department: Engineering, • Reports To: Engineering Manager, • Travel: Required for domestic and international business travel

Job Description Job Description Bird's cleaner, affordable, and on-demand mobility solutions are available in cities globally. We take a collaborative, community-first approach to micromobility. Bird partners closely with the cities in which it operates to provide a reliable and affordable transportation option for people who live and work there. The Operations Partner role is a key partner to Bird's Operations Team. The Operations Partner will work with our local City Operations Manager to manage our fleet of e-scooters in Yonkers, NY to ensure it stays maintained and deployed to meet the transportation needs of the community. The ideal candidate for this partnership should have a "doer" attitude, excellent time-management and execution habits, and the ability to communicate clearly. As an Operations Partner, you will use our mobile technology to monitor, transport, rebalance, and maintain our vehicles to ensure a safe, environmentally friendly scooter is always available to ride nearby. Key Responsibilities: • Manage the end-to-end operation of the respective portfolio, ensuring charging, deploying, relocating and retrieving vehicles, • Problem solve - prioritize tasks, and overcome obstacles that come your way, • Registered Business LLC, • General liability insurance (ability to acquire within 30 days of onboarding), • General commercial auto insurance (ability to acquire within 30 days of onboarding), • Valid Drivers License, • Access to a reliable vehicle for work-related duties, • Strong knowledge of the local geography, • Flexible availability and willingness to work daily, including weekends, • Comfortable learning and adapting to new concepts and using new tools, • Ability to lift up to 50 pounds; stoop, bend, walk, and stand for long periods of time., • Self-motivated, energetic and driven individual with the ability to learn new skills and build a team, • Ability to simplify difficult problems into actionable and solvable tasks, • This is an independent contractor position, not an employee role., • You are responsible for your own tools, equipment, and any associated expenses required to complete your work. We're an ambitious, smart and open-minded team that is passionate about our mission. Each day is unlike the last, as we're constantly moving forward, challenging each other, and working together to create the future of micromobility. Bird is the world Bird stands for a culture of inclusion. We celebrate different backgrounds, experiences, and perspectives —encouraging everyone to bring their authentic selves to work. We have a diverse environment that empowers our team to feel comfortable when they voice their opinions. For these reasons and more, Bird is a proud equal employment opportunity employer. We welcome everyone regardless of their race, color, religion, sex, national origin, age, disability, veteran status, or genetics. We are dedicated to providing an inclusive, open, and diverse work environment. Sound like a place you'd like to partner with? Sweet. Let's chat. Role Types: Contract Full-time Licence/Certification: #LI-Yonkers

Job Description We’re Hiring: Diesel Technician Location: 300 Victoria Terrace, Ridgefield, NJ 07657 Job Type: Full Time Company: Portside Truck & Auto Repair Pay: $25 - $38/ hr. At Portside Truck and Auto Repair, we take pride in providing top-notch diesel repair and maintenance services for our community. Whether it’s a fleet unit or a heavy-duty pickup, our customers count on us to keep their engines running strong. We are looking for a skilled and reliable Class A, B or C Automotive Diesel Technician to join our fully renovated state-of-the-art facility here in Ridgefield, NJ. If you love turning wrenches, solving problems, and working in a shop where your skills are respected- this is the place for you. Apply now! What You’ll Be Doing: • Preventative maintenance inspections and repairs, electrical troubleshooting, fuel and emissions system, air and hydraulic brake repairs, welding and fabrication, driveline, steering and suspension, plus other duties assigned., • Assisting fellow technicians with repairs while maintaining compliance with safety., • Maintaining knowledge of new technology in advanced diagnostics, internal engine and transmission repairs., • Maintaining a clean and safe work environment., • Completing necessary training. What We’re Looking For: • 2 years of hands-on diesel mechanic experience (heavy- duty preferred), • Advanced skills in strategy-based diagnostics; be able to utilize diagnostic tools and computers to identify root cause and correction, • Freightliner, Detroit, Cummins, Eaton experience preferred, • ASE certifications, knowledge of DOT standards Additional Qualifications: • Strong diagnostic and troubleshooting skills, • Strong verbal and written communication skills, • Commercial Driver's License preferred but not required What You’ll Get: • Competitive pay based on experience and certifications, • 401(k) with company match, • Uniform allowance and tool allowance, • Health, dental, advanced vision, Flexible Spending Account (FSA), • Paid time off + holidays, • Employee discount on services and parts, • A clean, professional shop and great crew to work with To apply, please visit our website - Portside Truck & Auto Repair or reach out to hiring manager Matt Petrosino at “Portside Truck & Auto Repair/ Diversified Automotive Inc., is an Equal Opportunity Employer & Drug- Free work environment”

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Training & development BROAD U.S.A. is a privately held company headquartered in Hackensack, New Jersey. BROAD delivers innovative solutions in three product areas: Absorption chiller and Electrical chiller Air Purification, Filtration and Ventilation systems Modular construction: Holon sustainable modular building system About the role: We are seeking a Building Automation Systems (BMS) Controls Technician to join our growing team. Qualified candidates will work with project managers on designing, specifying, programming and integrating new and existing building management systems. Candidate will also work with technical support & monitoring personnel on ongoing troubleshooting and support. This role is critical to our growing business and ensure our clients achieve energy efficiency and system optimization. Key Responsibilities: Perform necessary software programming, equipment start-up, tuning and calibration, commissioning and integration of HVAC controls, DDC systems and BMS software. Conduct preventative maintenance and respond to emergency service calls on existing BMS systems. Troubleshoot and repair control system installations independently, ensuring performance standards are met. Effectively communicate with customers to evaluate service needs, maintain proper scheduling and ensure high levels of customer satisfaction. Monitor customer buildings to ensure optimum performance standards are being achieved. Be proficient in knowledge of cooling and heating systems. Identify opportunities for additional building enhancements and perform upgrades and/or small-scale retrofits on existing systems. Keep updated with industry developments and building control system, particularly in energy-saving strategies and new technologies. Candidates should anticipate a portion of the time will require travel to customer locations throughout North America. Qualifications: 2+ years of experience in HVAC control systems and/or building automation, including servicing and commissioning electronic controls. Strong knowledge of BMS protocols such as BACnet, Modbus, Lonworks, Tridium/Niagara and experience working with Delta Controls, JCI, and Andover based BMS systems Hands-on experience with system design, integration, and troubleshooting, including both legacy and new systems. Familiarity with mechanical and electrical systems as part of construction and building automation system. Ability to work on-site, including in confined spaces, on ladders, and with equipment weighing up to 50 lbs. Competency in Microsoft Word, Excel, and AutoCAD for creating and managing project documentation. Preferred Experience working with systems from Delta Controls, JCI, Andover, and Tridium. Strong organizational, communication, and problem-solving skills. Ability to manage customer relations and work effectively in a team to meet project deadlines. Performing other duties as assigned by Project Manager Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related fields is a plus. Benefits: Competitive salary is based on experience 401(k) plan with company match Comprehensive health insurance (Medical, Dental, Vision, Life) Paid Time Off and company holidays BROAD is an equal opportunity employer

Job DescriptionCompany Description We are seeking an experienced Safety Manager to oversee and enforce site safety protocols during the installation of automated systems, including AGVs, VNA racks, and fulfillment center equipment, in factories and warehouses. This role ensures compliance with safety regulations, mitigates risks, and fosters a culture of workplace safety. Job Description Main Responsibilities: • Site Safety Oversight: Supervise daily operations to ensure adherence to all safety protocols during equipment installation., • Risk Assessment & Mitigation: Conduct hazard assessments and develop risk mitigation strategies., • Regulatory Compliance: Ensure all activities comply with OSHA, local safety codes, and company policies., • Incident Investigation: Lead investigations into accidents or near-misses and implement corrective actions., • Safety Training & Awareness: Provide ongoing safety training for workers and subcontractors., • Emergency Preparedness: Develop response plans and conduct drills for fire, electrical, and equipment-related emergencies., • Contractor Management: Ensure third-party vendors adhere to established safety standards., • Reporting & Documentation: Maintain detailed records of safety inspections, incidents, and compliance audits.Qualifications Experience & Qualifications: • Bachelor’s degree in Occupational Safety, Industrial Engineering, or a related field., • Minimum 3 years of experience in workplace safety, preferably in manufacturing or warehouse automation., • In-depth knowledge of OSHA regulations, safety codes, and risk management principles., • Strong problem-solving and leadership skills with the ability to enforce safety policies effectively., • Certification in safety management (e.g., CSP, CHST, OSHA 30/OSHA 510)., • Familiarity with automation technologies (Racks, AMRs/AGVs, conveyors, robotic systems)., • Ability to control the entire process of transporting, installing and commissioning heavy goods in factories or warehouses., • Frequent business trips to work at various sites in the United States should also be free from difficulties., • Ability to coordinate safety efforts across multiple teams, including operations and contractors., • Fluent in Korean and English Additional Information About the Benefits(Full-Time Employees): • Bonus: This position is bonus eligible, • Healthcare: At no-cost premiums for you and eligible dependent (medical, dental, vision, prescription), • 401(k): Retirement Savings Plan with company match, • Additional Perks: complimentary lunch on-site or lunch earning, phone stipend, Company product discounts, service awards, educational support, etc. All your information will be kept confidential according to EEO guidelines.

Job Description TITLE: Inside Distributor Sales Representative DEPARTMENT: SALES REPORTS TO: SR. CORPORATE ACCOUNT MANAGER, SR. ACCOUNT MANAGER FLSA STATUS: NON-EXEMPT/EXEMPT JOB DESCRIPTION REVISION: 1/24/24 BASIC FUNCTIONS As an Inside Distributor Sales Representative at Blue Raven Solutions, you play at pivotal role in ensuring our customers receive exceptional service and support. This entry-level position is designed for individuals with a passion for sales, excellent communication skills, and a positive attitude. Your primary responsibilities include quoting prices for in-stock items, managing a designated customer base, responding to heavy email and phone inquiries, and processing sales orders with precision. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Support the creation/building of long-term relationship with customers., • Performs order entry, reviews and processes orders, and create credit requests., • Create processes and maintain a variety of reports pertaining to specific clients., • Provide timely and accurate quotes for in-stock items., • Respond promptly to heavy email and phone activity, demonstrating a positive, friendly, and helpful attitude in all customer interactions., • Manage a defined customer base, establishing and maintaining strong relationships by proactively addressing customer needs and providing tailored solutions., • Efficiently process sales orders, ensuring accuracy and timely delivery while collaborating with various teams., • Interfaces with clients, account managers and internal departments to assist in resolving client-related administrative issues., • Identifies delays or problem areas, and suggests solutions for resolving issues., • Gather competitive information, and provide feedback on customer satisfaction, as well as recommendations to improve procedures., • Provide essential administrative support to the sales team., • Maintain customer database., • Help track individual customer quality and delivery ratings., • Comply with all customer quality requirements., • Support a safe work environment, using safety equipment, ensure safety equipment used in the areas is proper, safe, and used in a productive manner., • Follow established departmental policies, procedures, objectives, and safety standards., • Perform other related duties and personnel backups as assigned and contributes to team effort. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Pending EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma – College education preferred., • Strong Microsoft Outlook skills, • Strong attention to detail., • Strong follow-up and closing skills to drive sales opportunities to completion., • Customer empathy/ Superior customer service skills., • Highly organized. TRAINING REQUIREMENTS ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN CRESTWOOD TECHNOLOGY GROUP’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job Description Westchester Reform Temple [WRT] is an established house of worship located in Scarsdale, New York, and serves over 1,000 households as members of the congregation. WRT operates two buildings on its campus, is active 7 days-a-week, and provides a wide variety of activities through regular worship services, special celebrations and events, life-cycle events, after-school classes, pre-school classes and adult education opportunities. This full-time position reports to the Facilities Manager, but must also work with and take direction from senior staff. The utmost courtesy and calm professionalism are expected at all times, in every interaction with supervisors, coworkers, community participants and outside vendors. This role includes a usual schedule of 5 days per week. Typically, this includes 4pm-9pm on Tuesday, Wednesday & Thursday, 7am-8pm on Friday, and 8am-7pm on Saturday - during the school year. Special events, monthly meetings and Jewish holidays will change this schedule often. Summer months will also have a different shift schedule. Responsibilities include but are not limited to the following: · Follow all safety and security protocols, and report any safety or security problems immediately · Conduct daily inspections of entire property. o Check grounds and all internal areas for cleanliness and safety. o Check bathrooms, kitchens and all utility areas for cleanliness, safety and proper operation. · Plan in advance o Check online calendar each day for changes to the schedule of events and needs. o Meet weekly with Facilities Manager for 2-week advance look at calendar. · Respond to any facility emergencies and alarms, and be prepared to fill in for custodian absences. · Lead the custodian team for daily assignments and needs. o Work a daily shift of cleaning, setups & breakdowns, and cover shifts as needed. o Train custodian team for all janitorial and hospitality tasks. o Check the completed work of the team. o Document any problems, and share them with the supervisor. · Monitor and report on inventory of consumable supplies, chemicals and equipment. o Document usage of consumables. o Provide notice of re-supply needs, in advance, to supervisor. o Control inventory for loss prevention. o Maintain accurate MSDS book for all chemicals and products used at WRT. · Work at special events throughout the year, including extended shifts during the Jewish High Holidays. · Report and document facility problems and repairs needed. o Perform repairs as appropriate (light carpentry, electrical, plumbing, etc.) to facility, equipment, systems, property and materials. · Identify short-term and long-term facility/building projects for supervisor, which need to be scheduled and cost quoted. · Identify special seasonal projects to be done during school breaks and summer. · Other duties as assigned by supervisor. The ideal candidate for this position will present with the following: · Experience working in a synagogue, church or school strongly preferred. · Organized, accurate and very detail-oriented. · A strong work ethic, and takes pride in work results. · Strong spoken and written English communication skills. Able to speak and understand Spanish. · Training, experience and expertise with major facilities elements, including janitorial work, hospitality events, light repair (plumbing, electrical, HVAC, carpentry, sheetrock, painting), grounds keeping, fire alarm and security alarm systems. · Physically able to safely bend, lift and carry heavy items (up to 80 lbs.), use ladders and stairs, and to work on feet for extended periods of time, without injury. · Works well independently, and works well in partnership with others. · A communication style and personal presentation that is respectful, friendly, collaborative and professional. · Plans ahead, adapts smoothly to plan changes, and responds well to correction. · Computer literate, able to learn and develop expertise with new programs. · Reliable, independent transportation. · Willing to serve “on call” to respond to emergency building needs. · Willing to work a flexible schedule, including weekends and evenings, on a regular basis. · Minimum of 5 years of progressive custodial/maintenance experience. · Minimum of 3 years of experience in a supervisory role. WRT believes that all applicants should be considered fairly for employment opportunities. We are most interested in finding the best candidate for the job, and we recognize that our best candidate may come from a less traditional background. We encourage you to apply if you feel you are poised to excel at this important work with us. WRT abides by all applicable federal, state and local laws which prohibit discrimination on the basis of any protected characteristic as established by law. We seek employees with a positive attitude and pride in their work. Compensation may range between $55,000 and 70,000 per year, plus benefits, depending on credentials, skills and experience. Interested candidates should contact with a resume and cover letter.

Job DescriptionJoin LaundryLux Laundrylux is the North American supplier of Electrolux Professional & Wascomat equipment for Laundromats, Coin Laundries & On-Premises Laundries. From financing to repairs, Laundrylux provides a comprehensive set of services to help with all elements of commercial laundry. Technical Training Specialist What we are looking for: As the Technical Training Specialist, your goal is to be the subject matter expert on our products. The objective of this position is to provide the technical training and education of internal employees as well as external clients, customers, owners, distributors and technicians in the product knowledge and technical knowledge required to sell, distribute, service, install, maintain, and promote all our product lines. Before we continue to dive into the requirements for the role let’s talk about Why you should join LaundryLux? Career Advancement: We offer a career, not just a job. We invest in the personal and professional growth of every employee because we believe growth leads to both business impact and personal fulfillment. Learning and Development: We foster a culture that encourages and promotes professional growth and development, with continuous learning Diversity Initiatives: We are proud to have launched the Women’s Initiative focused on building a better workplace for women, providing support, and recognizing the talented women within our company. LaundryLux Benefits: We offer a comprehensive benefits package including: * Health benefits package including medical, dental & vision plans * Life Insurance * 401(k) with company matching * Paid Time Off * Paid Holidays * Profit Sharing * Employee Referral Program * Mentorship Program * Company Sponsored Training * Tuition Reimbursement Back to the role: What you will do: * Partners with National Technical Training Manager to schedule and provide product training to Laundromat owners, internal technical staff, internal and external Sales personnel. * Assist in the onboarding of new hires for LaundryLux and LaundryLux Distribution. * Partners with VP of Customer Success & sales teams on equipment installations ensuring a smooth transition to our product. Also, aide in the training of new distributors to ensure a valuable onboarding experience. * Partners with National Technical Training Manager to assist in creating external training schedules with clients/distributors/technicians for all LaundryLux sponsored training courses. * Assist Direct Sales Commissioning team by providing support for escalating issues. * Visit client sites assigned by management to assist with solving high profile technical problems or other installation issues or client equipment emergencies. * Attend distributor sales shows, industry conferences, and technical events for Vended, and OPL teams, as requested. * Assist in creating training materials, courses, and demonstrations, including videos, procedures, and technical documents to assist Laundrylux employees as well as external distributors and technicians to service, repair and maintain all product lines. * Identify continuous improvement activities that will be required to create a world class technical support function. * Stay up to date with product / technical knowledge to professionally articulate equipment differentiation, specifications, benefits, and industry information. * Ensure accurate budget spend is maintained in line with the company financial process. * Perform other duties as assigned by management. What you should have: * Experienced in both receiving as well as providing direction. * Demonstrated leadership and training/teaching/coaching abilities. * Excellent presentation skills. * Proficiency in communications and continuous improvement methodology. * Demonstrated ability to prioritize multiple tasks in a manner that supports the strategies of the organization. * Excellent customer service and relationships skills. * Analytical critical thinking skills. Education and Experience: * Bachelor’s degree in a technical field or a business management degree is a strong plus. * 5+ years’ experience in the professional and commercial laundry equipment service and or sales industry. * Technical background and experience, with direct mechanical and/or electrical knowledge a strong plus. * Prior training experience preferred. Travel Requirement: * 75% in the field. Mostly domestic U.S. and occasional Canada & Mexico. * Flexibility is required, as some travel and training may be needed in other regions and may sometimes require weekend travel. Our Values: People, Share Responsibility, Integrity, Excellence, Customer Focused, Meaningfulness and Fun If you are looking for your next challenge, then this is your chance to join our team of exceptionally talented, creative and innovative professionals. We want you! We are an equal opportunity employer and we are committed to providing reasonable accommodations to individuals with disabilities in all aspects of the employment process. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Our company participates in E-Verify.

Job Description BASIC FUNCTIONS Lead and direct the Quality Engineering Team, ensuring that products meet design and reliability requirements. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Offer technical support as required throughout the organization., • Oversight of the Designated Quality Representative (DQR) program for Sikorsky, Lockheed, GDLS and UTC., • Ensure AS9102 and customer requirements are met for all First Article Inspections conducted at CTG, • Technical blueprint, specification and datasheet interpretation and support for all departments, • Provide support for customer defined contract review on any technical requirements established by the customer., • Product planning for all new product(s) – Sampling plans, Inspection/Test methods, validation/verification points., • Product failure review (Internal and External) and providing solutions for added testing/inspection., • Product failure review (Escapes - RMA) from customer. Communication with Sales Department and Customer on resolutions. Process Return Material Authorizations accordingly., • Product Failure review (Internal – RTV), identify any potential Suspect Counterfeit, Confirmed Counterfeit or Unapproved parts that require disposition. Coordinate with the Quality Compliance Manager per AS5553 on disposition methods., • Supporting the Electronic Review Board (EEE Device review – Blueprint, specification requirements and providing authentication solutions), • Monitoring and Measurement Equipment calibration and preventative maintenance. Creating effective cycles to ensure longevity of equipment., • Coordinate with Quality Compliance Manager to establish new standards (ISO, AS or otherwise) to implement within Quality Management System., • Ensure technical standards (ESD S20.20, ISO17025, AS6171, IDEA-STD-1010, etc.) meet industry requirements and are established within the organization in the form of written, documented processes., • This individual has the authority to disposition product(s) as necessary., • Ensures compliance with company code of conduct and all applicable laws, regulations, rules, and policies., • Perform other duties as necessary STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • OTD for special processes FAI, Test Plans, DARs, • Quality ratings for special processes (RMAs, nonconformances, rework) EDUCATION / EXPERIENCE / COMPETENCY • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Strong supervisory and leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Proficient with Microsoft Office Suite or related software., • Bachelor’s degree in related field required., • At least three years of related experience required.

Job DescriptionWe are currently looking for a Manufacturing Engineer with 3D CAD Design Proficiency for our client, a manufacturing company located in Yonkers, NY. This is a Permanent Direct Hire opportunity. Hours: 8:30am-5:30pm. Salary: $85-100K DOE.Job Description: • Provides assistance to the Production Engineering Manager for all aspects of planning functions., • Researches and analyzes production specifications and plant capacity to determine manufacturing processes., • Plans, prepares, and issues parts and material schedules that anticipates and coordinates with production sequences., • Researches, plans, and schedules manufacture of jigs, fixtures, and production aids based on requirements of production sequences., • Develops procedures for the construction of production aids and modifications of these as needed., • Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles., • Develop and test models of alternate designs and processing methods to assess feasibility, operating condition effects, possible new applications and necessity of modification., • Estimate costs and submit bids for engineering, construction, or extraction projects, and prepare contract documents., • Uses computer assisted design/drafting (SolidWorks, AutoCAD) equipment and software to develop production (shop) drawings., • Creates and revises production drawings (detail and assembly drawings)., • Utilizes knowledge of various machines, engineering practices, mathematics, materials, and other physical sciences to complete drawings., • Drafts detailed Multiview drawings of individual parts from assembly drawings., • Creates DXF files as used in writing CNC programs, completes CNC programs., • Responsible for maintaining an organized file system for Production Drawings.Job Specification:, • Must have a minimum of five (5) years’ experience in plant engineering or production planning., • Bachelor of Science degree in Mechanical, and/or Electrical Engineering (or equivalent experience) is required., • Must have direct work experience with production processes, manufacturing technologies, and facility equipment including machinery, overhead cranes, jigs, fixtures, rigging, and production aids., • Must have excellent communication and problem-solving skills., • Able to create 2D or 3D designs to run simulations, analyze and test., • This position requires direct exposure to work conditions on the factory shop floor., • Ability to work with mathematical concepts such as statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concept such as fractions, percentages, ratios, and proportions to practical situations. Comfortable working with metric system., • Solid understanding of drafting techniques and familiarity with engineering terminology., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • High skill level in SolidWorks CAD software, AutoCAD version 2000 or higher., • Skilled in PC usage and associated software including Microsoft Office (Word, Excel)., • Ability to learn new graphic software to complete CAM programs for Laser and Turret Punch machines., • Working Knowledge of Sheet metal fabrication equipment such as Brake Press and Shear a plus.

Job Description BASIC FUNCTIONS Entry level position. Performs basic counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility, • Ability to complete a full analysis on all EEE Devices within the Laboratory, • Ability to learn and subsequently operate all test equipment within the Laboratory Department, • Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested., • Identify nonconformity to provide data to Quality Manager., • Ability to communicate, document and report all nonconformity within internal system and direct supervisor., • Ability to conduct work as assigned by senior management., • Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day., • Ability to understand industry traceability and documentation requirement as required for each industry, • Ability to evaluate and differentiate between various commodity types., • Review and implement detailed inspection reports to provide all information regarding product testing and inspection, • Ability to use general inspection gages, Ex. Calipers, Micrometers, etc., • Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements., • Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity., • Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements., • For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports., • Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily throughput (inspections/Lab steps completed), • Quality Issue detections (Incoming NCM ), • Outgoing Quality (customer Escapes), • IDEA Certification and knowledge implementation, • Use of GD&T and FAI knowledge for timely FAIR completion, • Issue communication, • Daily 6S/ESD/FOD policies followed, • Ability to find datasheets/drawings information on CTG Systems, • Diversity of inspections (EC/EM/HA/Hardware/etc), • Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma or equivalent, • 1 year of manufacturing or quality experience is a plus but not required, • Must be proficient in English, both written and verbal communication skills, • Good arithmetic skills are required, • Mechanical aptitude desired, • Working knowledge of measurement instruments: i.e., calipers, etc., • Basic proficiency of Microsoft Excel and Word, • Must complete IDEA-ICE-3000 Certification within 6 months of hire., • Able to pass internal testing and training to meet internal requirements, • Must demonstrate acceptable vision requirement.

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility, • Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested., • Ability to complete a full analysis on all EEE Devices within the Laboratory, • Ability to operate all test equipment within the Laboratory Department, • Identify nonconformity to provide data to Quality Manager., • Ability to communicate, document and report all nonconformity within internal system and direct supervisor., • Ability to conduct work as assigned by senior management., • Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day., • Ability to understand industry traceability and documentation requirement as required for each industry, • Ability to evaluate and differentiate between various commodity types., • Review and implement detailed inspection reports to provide all information regarding product testing and inspection, • Compile, review data and complete test reports IAW CTG Standards, • Ability to use general inspection gages, Ex. Calipers, Micrometers, etc., • Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements., • Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity., • Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements., • For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports., • Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections., • Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily throughput (inspections/Lab steps completed), • Quality Issue detections (Incoming NCM ), • Outgoing Quality (customer Escapes), • IDEA Certification and knowledge implementation, • Use of GD&T and FAI knowledge for timely FAIR completion, • Issue communication, • Daily 6S/ESD/FOD policies followed, • Ability to find datasheets/drawings information on CTG Systems, • Diversity of inspections (EC/EM/HA/Hardware/etc), • Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma or equivalent with a minimum of 2 years’ experience performing in-process and final inspection preferably in a machining, automotive or aerospace business, • Must be proficient in English, both written and verbal communication skills, • Good arithmetic skills are required, • Mechanical aptitude desired, • Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word, • Independent; can work with limited supervision and direction, • Must complete IDEA-ICE-3000 Certification within 6 months of hire., • Able to pass internal testing and training to meet internal requirements, • ASQ CQI certified or must completed certification within 1 year of accepting position, • Strong Electronics inspection knowledge preferred, • Must demonstrate acceptable vision requirement.

Job Description BASIC FUNCTIONS Facilitates accurate and timely processing of vendor invoices for inventory and non-inventory items. Also, scan and file all paper financial statements into electronic format. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES · On a daily basis, facilitate accurate and timely processing and posting of all of accounts payable invoices daily, obtaining approvals and troubleshooting issues when needed. · Establishing and maintaining relationships with new and existing vendors · Manage freight charges for all carriers (FEDEX UPS, and DHL) download reports and reconcile carrier shipment type to internal shipment report; dispute any issues with carrier weekly. · Reconcile and communicate un-invoiced receiving (UIR) and open receivers’ transactions on a weekly basis. · Process credit memo, adjustments, and journal entries. · Record commission charges. · Manage Accounts Payable folder ensuring all invoices processed by end of day. · Processing of COD payments. · Prepare COA report. · Backup AP Manager to download credit card activity from account websites, download into EPDS accounting system and code all charges weekly. · Backup AP Manager to process trade show charges in Concur. · Analyze vendor statements of accounts weekly. · Wire initiation for purchase order payments including coding into EPDS. · Processing of GS deductions · Receive, open and distribute mail by end of mail. · Performs data entry into our computer software programs. · Acts as backup to AP Manager. · Ensures compliance with company code of conduct and all applicable laws, regulations, rules and policies. · Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. · Perform other duties as necessary STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. EDUCATION / EXPERIENCE / COMPETENCY · Associate degree or higher in accounting or any business-related discipline, required. · Basic proficiency in Microsoft Excel · 2 years+ experience within accounts payable discipline. · Experience processing invoices in high-volume · Experience Comparing purchase orders, prices, terms of payment and other charges. · Strong analytical skills. · Ability to compare/analyze reports. · Strong problem-solving skills, basic accounting principles knowledge, documentation skills, research and resolution skills, data analysis and multi-tasking skills. Company DescriptionBlue Raven Solutions, including Triman Industries, Inc., and Crestwood Technology Group, LLC (collectively, the “Company”) is a portfolio company of AE Industrial Partners, LP (“AEI”), a private equity firm specializing in aerospace, defense & government services, space, power & utility services, and specialty industrial markets. Since August 2019, AEI in partnership with the Company’s management team and other shareholder partners, has been strategically building a unique platform of scale serving the complex military aftermarket with a broad set of capabilities that enable OEMs to increase sales, performance and productivity while allowing military customers to minimize program risks and costs. Blue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.Blue Raven Solutions, including Triman Industries, Inc., and Crestwood Technology Group, LLC (collectively, the “Company”) is a portfolio company of AE Industrial Partners, LP (“AEI”), a private equity firm specializing in aerospace, defense & government services, space, power & utility services, and specialty industrial markets. Since August 2019, AEI in partnership with the Company’s management team and other shareholder partners, has been strategically building a unique platform of scale serving the complex military aftermarket with a broad set of capabilities that enable OEMs to increase sales, performance and productivity while allowing military customers to minimize program risks and costs.\r\n\r\nBlue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job Description Product Sales - Machinery Division Responsibilities: • Sales Support: Collaborate exclusively with Sales Representatives to provide expert technical assistance and support. Focus 2% on acquiring new accounts and 98% on nurturing and growing existing accounts., • Training & Development: Provide comprehensive training to Sales Representatives on our product offerings, enabling them to sell effectively and with confidence., • Customer Interaction: Engage directly with customers to understand their needs, provide technical insights, and promote our product solutions., • Competitive Analysis: Maintain an in-depth knowledge of competitive products and market conditions to effectively position our offerings., • Project Assessment: Assist in evaluating the viability of projects from both technical and commercial perspectives., • Order Assistance: Support Sales Representatives in the follow-up process and closing of orders, ensuring a smooth and successful transaction., • Specialty Equipment Requests: Handle requests for specialty equipment with written documentation from customers. Review and discuss these requests within the sales team to ensure appropriate responses., • Proposal Review: Examine and approve offerings prepared by field sales representatives before they are submitted to prospective customers., • Customer Visits: Arrange and conduct face-to-face meetings with prospective customers to foster relationships and drive sales., • Sales Activities: Participate in various sales and marketing activities, including trade shows, customer seminars, and other events as needed. Assist in display set-up, dismantling, and other related tasks., • Technical Proficiency: Strong technical aptitude and problem-solving skills. Experience with CRM systems is a plus., • Experience with manufactured electro-mechanical capital equipment, specific to the Food & Bev industry would be preferred, not required, • Communication Skills: Excellent interpersonal and written communication abilities., • Educational Background: Degree in Mechanical Engineering (ME), Electrical Engineering (EE), or Chemical Engineering (CE) is desirable, but not required., • Sales Experience: Proven experience in selling technical engineered products across various industries. Experience with processing industries is a plus., • Business Acumen: Strong understanding of business principles with a professional demeanor., • Physical Requirements: Ability to perform physical tasks such as bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking for extended periods. Must be able to work in diverse environmental conditions, including varying temperatures, weather, and noise levels., • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member, • To be a part of a well-established team that values hard work, innovation & knows the value of its people, • Coaching, mentoring helping team members realize their potential, aiding in defining goals and executing them, • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management, • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job DescriptionSmart Homz is a rapidly growing Home Tech company and is seeking field technicians. Full-time Opportunities in Bergen County, NJ Salary: Starting hourly wage is based on experience We are seeking a motivated and experienced Project Manager/AV Technician to oversee the installation, configuration, servicing, and troubleshooting of home theater systems, A/V distribution, home networking, security systems, and Smart Home technologies. This role involves working in both new and existing construction projects and includes supervising a team of technicians, coordinating on-site activities, ensuring quality control, and serving as the main point of contact for management and clients. The ideal candidate will have strong technical expertise, leadership skills, and a commitment to delivering high-quality results. Qualified applicants MUST: • Strong work ethic and accountability, with a commitment to leading by example., • Positive, proactive "can-do" attitude with a team-first mindset., • Proven ability to manage projects from start to finish, including planning, delegating tasks, monitoring progress, and ensuring timely completion., • Strong attention to detail with the ability to document work performed, maintain project records, and generate basic reports., • Valid driver’s license with a clean driving record., • Flexible and motivated to grow both personally and professionally, with a desire to lead and mentor junior technicians., • Demonstrated experience in customer-facing roles, with excellent communication and service skills., • Strong safety awareness and ability to enforce safety protocols on job sites., • Skilled in using hand and power tools with the ability to train others on proper use., • Professional and sociable, with the confidence to represent the company on job sites and during client interactions., • High school diploma or equivalent (technical training or certifications preferred)., • Familiarity with residential construction practices and ability to coordinate with general contractors and trades., • Basic understanding of electrical circuits and theory, with the ability to troubleshoot and resolve technical issues independently., • Natural problem-solver with initiative to identify issues and implement practical solutions., • Desire to continually improve and stay current with emerging Smart Home technologies, tools, and standards., • Experience supervising or training technicians is a strong plus.The successful candidate will be working with the latest home automation technologies, and the highest performing audio and video systems. Experience: • Clean Driving Record: 5 years (Required), • Installation or servicing Home networking: 3 years (Preferred), • Installing or servicing Audio Video systems: 3 years (Preferred), • Installation or servicing CCTV systems: 3 years (Preferred), • Project Management: 3 YearsEducation:, • High school or equivalent (Required)

Job Description TITLE: QUALITY ADMINISTRATOR DEPARTMENT: COMPLIANCE REPORTS TO: QUALITY COMPLIANCE MANAGER FLSA STATUS: NON-EXEMPT JOB DESCRIPTION REVISION: 09/04/24 BASIC FUNCTIONS The Quality Administrator will provide support to the Quality Compliance team in maintaining a strong overall Quality Compliance Program including the Quality Management System and Supply Chain. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES GENERAL: • Produce detailed Excel, Word, and PowerPoint reports/presentations as needed by Department Leads., • Preparation of Quality Management Reviews, acquiring accurate data necessary to communicate the Quality Management System., • Evaluating QMR data and reporting back findings including but not limited to: trends, areas of concern, etc. to Department Leads., • Update management on open items related to projects., • Coordinate schedules, activities, meeting minutes and follow-up action items., • Provide support to External Provider Qualification program; identify risks and opportunities for improvement., • Provide support for updating all vendor files in EPDS as per approved Vendor Forms., • Assist Compliance team with functions related to document control., • Lead and/or conduct internal audits throughout the organization as directed by the Audit Program Manager in accordance with ISO19011, • Assist personnel with on-the-spot audits and process walk through as requested., • Member of the "Surveys Team", thus responsible for completion of Incoming Self-Assessments as directed by the Director of Contracts., • Training of personnel when requested by Management on any responsible processes., • Act as a backup administrator to the Compliance Regulatory Platform., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules and policies., • Update maintain and grow tracker with any applicable incidents as directed, • May be assigned additional responsibilities as directed by the Quality Compliance Manager QMS TRAINING ADMINISTRATOR: • Input training requirements provided by the Management Representative for all QMS applicable job titles, • Ensure newly onboarded employees are meeting training requirements within the 90-day probationary period, • Ensure training of revised documents are completed within the two-week CTG requirement. Follow up with department heads as needed to ensure trainings are conducted, • Send Weekly Delinquent Training Report to department heads as applicable., • Follow up with department heads regularly to ensure trainings are conducted and training records are closed, • Upload and maintain employee certifications within the Compliance Regulatory Platform, • Monitor employee certification expiration dates and notify department heads accordingly, • Ensure operational employees’ vision exams are up-to-date and notify department heads accordingly STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001, ISO17025 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA- QMS-9090, ASA-100 and supporting construct standards AS6081, AS6171, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Weekly recertification rate to meet annual requirements for External Providers (as needed with Supply Chain designee), • Re-Certification rate average turn time., • Procurement (Sales) Weekly completion rates, • Sub-Tier assessments submitted for completion + return rates., • New Sub-Tiers added monthly., • Closures of all said projects within CTG’s Compliance Project Management tool, • Customer Surveys received and documented monthly EDUCATION / EXPERIENCE / COMPENTENCY • Bachelor’s degree, preferred., • 1-3 years of administrative experience., • Proficiency in MS Office with expertise in Microsoft Word, PowerPoint, Excel and Project Management Tools., • Detail oriented and comfortable working in a fast-paced office environment, • Exceptional communication skills. ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN CRESTWOOD TECHNOLOGY GROUP’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job Description The Henry Kaufmann Campgrounds (HKC) is looking for an experienced maintenance and repair professional with strong, collaborative leadership capabilities to join our team as the Property Manager at HKC Rockland County. If you are looking for a fulfilling position where you get to spend your days outdoors, be a mentor and a strategic planner while getting to be hands-on in property, pool and vehicle maintenance, then keep reading. As Property Manager you will earn a competitive salary of $75,000 - $85,000 a year, plus bonus. The position also comes with a comprehensive benefits package that includes generous paid time off (vacation, paid holidays, sick leave), health, vision and dental insurance, life insurance and a matching retirement savings plan as part of our people-oriented culture. Other benefits include being part of a dedicated year-round staff who are invested in the success of our customer base, having an organization invest in your growth, and getting to see first-hand how the campers benefit from the fruits of your labor. If this sounds appealing to you, then apply today to join our team! ABOUT THE HENRY KAUFMANN CAMPGROUNDS The Henry Kaufmann Campgrounds is a small non-profit working in the day camp sphere with three locations. HKC Rockland County consists of a 105-acre property, which serves as home to four separate children's day camps. As a seasonal organization, HKC hires workers to provide maintenance and janitorial services, aquatics supervision and security to ensure we can carry out our mission to provide a safe environment and meet the needs of the camps who call HKC home. Our philosophy for success is to focus on the employee experience and ensure our staff have the training, tools and support they need to achieve excellence. A DAY IN THE LIFE OF THE PROPERTY MANAGER The Property Manager supervises a year-round staff of 3 and seasonal staff of 15. You'll be responsible for teaching, mentoring and inspiring your team to excel in everything asked of them. This person is involved in the long-term planning of HKC, and is tasked with developing and implementing preventative plans for property and vehicle maintenance. On a weekly and daily basis, the Property Manager will be assigning tasks and managing the Work Orders. This is a hands on role so on any given day the Property Manager might be mowing, painting, repairing a vehicle, handling a water or sewage issue, removing trash or blowing leaves and using such equipment as backhoe, tractor, skid steer, ride-on deck mower or 3-wheel groomer. There is a cycle to the work based upon the season (winterizing in the fall, planning and deep cleaning or repair in the winter, preparing for camp in the spring, and maintaining in the summer) but there are always regular tasks to be done regardless of the season. Each week brings its own challenges, with the Property Manager having to adjust plans based upon the weather. MANAGEMENT This position reports directly to the COO/CFO (who also has years of experience in facility maintenance) and who is wholly invested in your success and the success of the team. You'll also have the full support of the rest of senior management team. WORK SCHEDULE This job requires the team to work in-person. For most of the year, it's mainly a Monday - Friday job, with hourly workers clocking in 7:00AM - 3:30PM. During the off-season (September - April) there may be the occasional weekend events. The gear up to the start of camp (May - June) is the busiest time, where extended days and weekend work should be expected as we make sure the grounds are ready to welcome the campers on the first day of camp. During the 7-8 weeks of camp, expect long days and some weekend work. MINIMUM REQUIREMENTS The ideal candidate has to have at least 5-years' experience successfully managing a team, be it as a foreman, a project manager or in some other simlar capacity. This experience must include training and evaluating staff and working hands on side-by-side with the team and should have a demonstrable excellent safety record. Also required is a valid driver's license and experience using technology as a management tool. Our new Property Manager should have working knowledge of general maintenance, landscaping and janitorial services as well as painting, carpentry, electrical wiring and controls, plumbing, vehicle and machinery operation and water and sewage treatment but also specialize in at least one of these areas. Within 6-months of hiring, the Property Manager will be expected to obtain OSHA30 Certification and become a CPO (certified pool operator) and be first-aid certified; all at no cost to them. A degree or certificate in property management, agronomy, landscape management or a related field is preferred. Computer proficiency is required. APPLY/SCREENING PROCESS It's quick and easy to apply. If this sounds like the job for you, please fill out our initial mobile-friendly application. If you meet our basic requirements, we'll be in touch within a day or two via email or text to schedule a phone screening. We look forward to meeting you! Location: 10962

Job Description BASIC FUNCTIONS The Operations Administrator contributes to the coordination of the Sales Department’s strategic and tactical plans. The Sales Operations Coordinator supports the Sales Operations Manager on special projects, Account Management administrative functions, processes, metrics, and training. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Support special projects, such as improvement of delivery and quality metrics Support administrative activities with Sales so that Account Managers can focus on customer contacts. Examples include: help desk ticket management, sending general marketing information, entering contacts/leads, administrative documents, trackers, form completion, etc., • Perform activities as directed by Sales Operations Administrator related to Sales metrics, • Prepare, facilitate, and record training for all Sales personnel Including Sales training plans to onboard new Sales Assistants and Sales personnel., • Maintain Sales EPDS Manual., • Review and update policies and procedures for the Sales Dept., • Meet, coordinate, and support activities with other CTG Departments to ensure alignment on Sales and Operations objectives., • Monitor inbound PO’s and work with Sales to keep dates current/updated as needed., • Monitor RMA/RTV progress; work with sales employees to resolve all issues within the 30 day requirement., • Assess and measure effectiveness of processes, • Audit sales processes and work as needed, • Evaluate unforeseen/unplanned issues that arise with procedures and processes to determine the best course of action., • Maintain and update documents on the Sales team page on the Intranet., • Support the Sales department in OST meetings., • Support sales res during internal audits and when necessary during external audits., • Comply with all customer quality requirements., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules and policies., • 0-3 years project management, supply chain and/or operations experience., • B.A. /B.S. from an accredited university desired, or equivalent experience; Masters preferred., • Defense and Aerospace experience preferred., • Experience with a QMS and process-driven environment., • Advanced knowledge of Microsoft Office Suite – specifically Outlook, Word, Excel and PowerPoint., • Benefits: Health insurance, Dental insurance, Vision insurance, Retirement plan, Paid time off, Flexible schedule, Parental leave, Professional development assistance., • Open door policy with executives., • Free catered lunch daily., • Annual corporate events. Blue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.Blue Raven Solutions, including Triman Industries, Inc., and Crestwood Technology Group, LLC (collectively, the “Company”) is a portfolio company of AE Industrial Partners, LP (“AEI”), a private equity firm specializing in aerospace, defense & government services, space, power & utility services, and specialty industrial markets. Since August 2019, AEI in partnership with the Company’s management team and other shareholder partners, has been strategically building a unique platform of scale serving the complex military aftermarket with a broad set of capabilities that enable OEMs to increase sales, performance and productivity while allowing military customers to minimize program risks and costs.\r\n\r\nBlue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.

Job Description About Us We’re looking for a skilled and motivated Residential Maintenance Tech to join our team. This position plays a vital role in preparing rental units between occupancies and maintaining the overall appearance and condition of our residential properties. Position Overview The Residential Maintenance Tech is responsible for performing a variety of repairs, upgrades, and cosmetic improvements in residential rental units, with a primary focus on preparing vacant units for new tenants. This includes everything from cleaning and patching to more detailed work like wood floor restoration and light carpentry. Key Responsibilities • Prepare and refurbish vacant residential units for move-in readiness., • Perform light drywall repairs, patching, and interior painting., • Restore and refinish hardwood floors, including sanding and applying polyurethane., • Conduct light carpentry such as replacing trim, installing shelves, or fixing doors., • Replace or repair fixtures, hardware, appliances, and minor plumbing/electrical components., • Deep clean units, including kitchens, bathrooms, and floors., • Identify and report larger maintenance issues that require specialized contractors., • Maintain cleanliness and organization of workspaces, supply rooms, and tools., • Coordinate with the Property Manager to ensure unit turnover deadlines are met., • Follow all health, safety, and building code regulations while performing duties. Qualifications • High school diploma or equivalent., • Minimum 1–2 years of experience in property maintenance, refurbishing, or residential construction., • Experience in hardwood floor restoration (sanding, staining, and applying polyurethane) required., • Basic understanding of residential plumbing, electrical, and carpentry., • Ability to work independently, take initiative, and meet tight turnaround timelines., • Excellent attention to detail and quality craftsmanship., • Reliable transportation and valid driver’s license., • Physical ability to lift, bend, kneel, and stand for extended periods; lift up to 50 lbs.

Job DescriptionPosition Description: The purpose of this position is to perform clerical functions in the shipping department. Responsibilities: 1. Complete pick sheets (assign product to scheduled packaging loads)., 2. Take appointments and schedule trucks to pick up product., 3. Assist in monthly inventory, 4. Assist loaders by helping find product, 5. Update and maintain the label inventory, 6. Attend scheduled safety and GMP meetings., 7. Enter daily move sheets., 8. Schedule and maintain inventory on packaging supply trucks, 9. Update the Shift Supervisor on packaging supply status, 10. Review orders and select product for each load following FIFO., 11. Enforce DOT weight regulations on outbound trucks., 12. Authorize truck drivers to enter the facility., 13. Ensure compliance with all safety, food safety, environmental, GMP rules, regulations and policies., 14. Perform clerical duties as assigned by the Shipping Supervisor or Plant Manager., 15. Enter in down time information DWP., 16. Maintain copies of warehouse move sheets, take off sheets, etc, 17. Complete samples for shipment via UPS or LTL, 18. Working close with sales / customer service on shipment issues, 20. Must be highly organized and able to prioritize multiple tasks and deadlines., 21. Must have good problem solving skills, 22. Must be detail oriented.

Job Description BASIC FUNCTIONS Prepare all incoming and outgoing shipments to customers and vendors. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Ensures Shipping and Receiving Department has capacity and capability to meet the needs of the business, • Prepares shipments for postal or commercial conveyance; determines most economical and efficient shipping method; selects appropriate shipping container; packs items to ensure safe delivery., • Prepares bills of lading; checks items to be shipped against picking tickets to ascertain that quantities, destination, and routing are correct., • Receives and unloads incoming materials and compares information to receiving reports to verify priority; may process return shipments from customers., • Packages, labels, insure, and/or logs inventory which is shipped or received., • Inspects shipments for damages or defects; records discrepancies or damages and notifies supervisor and/or purchasing personnel., • Initiate and follow Carrier Transit Claims from submission to conclusion., • Package items for safe delivery to customers., • Check for special customer requirements for shipping., • Organize materials in shipping area., • Perform/Assist with receipt of incoming shipments., • Update Chemtrec portal with SDS documentation, • Assist accounting with shipping invoices. Be able to pack and ship hazmat materials, including Haz Shipper software., • Comply with all requirements of the environmental management system., • Delegate workload to shipping/receiving associates., • Work with shipping company drivers on any changes to pick up times., • Communicate with internal departments on any open issues in a timely manner., • Order materials needed for the shipping department,, • Routinely interface with global trades manager to ensure international shipment conformance., • Training S&R department on procedures and ensuring the teams skill competencies are able to support the business., • Maintains shipping paperwork. (Boxed/Scanned), • Participate in S&R performance reviews, • Schedule work hours for employees to ensure coverage and reduce OT., • Adhere to Safety Manual requirements for Supervisor/Manager, • Ensuring Shipping and Receiving is audit ready at all times., • Inform Director of Logistics of all work stoppages so that he can perform root cause analysis., • Maintain and contribute to a positive environment in the shipping department. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily/Weekly/Monthly Chemtrec fillings, • Daily inbound and outbound freight Report, • Daily Drop off and Pickup Time Scheduling, • Hazmat Shipment Compliance, • Freight Shipment OTD, • QT Training of S&R new hires completed in 90 days, • QT Training records current for shipping and receiving team members EDUCATION / EXPERIENCE / COMPENTECY • High School Diploma, • 2-4 years of relevant experience in related field(s), • Ability to pay attention to great detail., • Prior knowledge of shipping/receiving techniques., • Proven/ demonstrated ability to lead a team.

Job Description BASIC FUNCTIONS Provide support and assistance to assigned sales manager. Calls and/or receive calls from new or existing customer base. Answer questions about product, service, price, delivery, submittal status, availability of product, etc. Assesses customer needs and makes recommendations for products and services. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Support the creation/building of long-term relationship with customers., • Performs order entry, reviews and processes orders, and create credit requests., • Create processes and maintain a variety of reports pertaining to specific clients., • Interfaces with clients, account managers and internal departments to assist in resolving client-related administrative issues., • Identifies delays or problem areas, and suggests solutions for resolving issues., • Gather competitive information, and provide feedback on customer satisfaction, as well as recommendations to improve procedures., • Assist Sales Manager in attaining sales performance goals., • Maintain customer database., • Assist Accounting with vendor invoice processing., • Follow up with customers, • Order tracking, • Help track individual customer quality and delivery ratings., • Comply with all customer quality requirements., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules and policies. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma – College education preferred., • Strong Microsoft Outlook skills, • Strong attention to detail., • Customer empathy/ Superior customer service skills., • Highly organized.