Trabajos engineering technician en Plainview, New YorkCrear alertas

engineering, programming, installation, energy services, and cloud / remote solutions This Jobot Job is hosted by: Courtney Hoogervorst Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $35 - $50 per hour A bit about us: building automation and controls company Why join us? • Competitive pay: $35–$50/hour (based on experience), • 100% paid employee medical coverage + 50% for dependents, • 401(k) with 4% company match, • 7 paid holidays + 2 weeks of vacation starting day one, • Company vehicle, gas card, phone, and laptop provided Job Details An established Building Automation and Integration firm in the DFW area is looking for an experienced Controls Service Technician to join our growing service team. This position is ideal for someone who enjoys troubleshooting complex systems, programming controllers, and ensuring our clients’ facilities run smoothly and efficiently. What You’ll Do • Perform service, diagnostics, and repair of Building Automation and HVAC control systems, • Troubleshoot DDC panels, communication networks, and control sequences, • Modify or create control programs using Tridium Niagara, ABB, Distech, Honeywell, and Johnson FX platforms, • Collaborate with project managers and engineers to support ongoing construction and retrofit projects, • Handle emergency service calls and preventive maintenance with professionalism and technical precision What We’re Looking For • Minimum 2 years of experience servicing or programming DDC/BAS systems, • Proficiency in ladder-logic or similar programming environments, • Experience with any of the following platforms: ABB (Cylon), Distech, Honeywell, or Johnson Controls, • Tridium Niagara (AX/N4) certification preferred Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Note: This is an educational program, not a job. Successful completion of the program does not guarantee employment but will equip you with valuable skills for the trades and industry job market. Are you ready to build a hands-on career path in the trades and industry sector? Dreambound offers practical training programs that will equip you with the skills needed for various high-demand roles in skilled trades and technical industries. What programs are available? We offer specialized trade and industry training programs depending on your location, including: • Electrical Engineering, • HVAC, • Gunsmith, • Automotive Service Technician, • Cosmetology, • Tower Technician, • Welding, • Construction Manager, • Aviation Maintenance Technician, • Esthetician You'll receive hands-on training and comprehensive instruction to prepare you for certification (if relevant) and the trades and industry job market. Highlights : • Complete in as short as just a few weeks, • Flexible online and in-person options available This is an educational opportunity that requires a financial investment. Cost varies per partner school, but payment plans and / or financial aid may be available to those who qualify. Take the first step towards your new career path today!

Environmental assessment company hiring a Field Technician with hands on skills, must be comfortable working at height This Jobot Job is hosted by: Tony Marasco Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $28 per hour A bit about us: We have over 40 years of experience providing environmental quality testing, management and consulting services to municipalities, utilities, healthcare facilities, private industry, consulting firms and government agencies. We provide customized solutions and services to form the foundation of a solid environmental management program. Why join us? Technical training Career development 15% travel Job Details Stack testing firm located in Long Island NY , performs stationary source emission evaluations, air permit compliance for combustion sources. Utilizing USEPA reference test methods. Needing hands on working with hand tools, computer knowledge excel, word etc. Conduct field tests, provide engineering team data and help with reports. Must work at heights on smoke stacks, hoist 40 lbs, have drivers license, car. Local work in and around NYC metro area, out of town 10-15 % of work load. will train. The job entails starting at the office each morning to collect the company van and the sample kits for each day, and going to client sites to help collect samples and work on smoke stacks. Required Qualifications: • Mechanical technician professional experience OR Technical School education, • Strong hands on mechanical skills, • Basic mechanical and electrical systems experience, • Basic computer skills, • Valid Drivers license (will drive company van), • Comfortable with heights (will work on smoke stacks), • Ability to lift 45 pounds, • Reliability Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description The Building People, LLC, has a position open for a full-time HVAC/R Technician for the facilities engineering program to support a federal Agency. The HVAC Technician will have a strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all systems. Individuals are expected to demonstrate technical expertise in HVAC trade and be multi-skilled in others (Electrical, Piping/Plumbing, Central Utility Plant Operations) in order to successfully complete daily/weekly work assignments. Responsibilities will include, but not be limited to: • Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep facility and building systems up to applicable standards as assigned, • Maintains responsibility for facility services, corrective maintenance, inventory control, general maintenance and technical proficiency., • Maintenance of the equipment will include cleaning, inspecting, calibrating and changing parts to maintain the HVAC systems and associated equipment at optimum performance levels, • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc., • Knowledge of the tools, materials, and test equipment used in the installation,, • Maintenance and repair of air conditioning/refrigeration HVAC control systems., • Install, maintain, and repair HVAC controls, including DDC, pneumatic, electric, and electronic controls., • Troubleshoots and repairs HVAC/BAS control problems, including dampers, coils, HVAC steam related controls, air handling equipment, and all types of valves., • Adjusts and calibrates pneumatic/electronic devices to balance all HVAC systems., • Inspects and services controls on a scheduled basis., • Responds to service calls and troubleshoots problems., • Prepares estimates for the repair and/or installation of new Mechanical, Electrical and Plumping systems and makes recommendations for such repairs and services., • Troubleshoots and tests controls using test gauges, amp meters, hydro thermographs, and computers., • Repair equipment and perform corrective maintenance in assigned programmatic area(s)., • Inspect and test equipment / systems to ensure that technical integrity is maintained and if necessary, proposes appropriate corrective action., • Review pertinent technical manuals to remain current with technology and electrical safety codes., • Work indoors & outdoors in the installation and maintenance of a wide - array of technical equipment; use of ladders, safety equipment and ability to navigate rooftops and tight spaces may be required, • Applies technical knowledge to perform simple or routine tasks following detailed instructions., • Receives technical guidance, as required, from supervisor or higher-level technician., • Five (5) years of commercial HVAC/R journeyman level experience., • Communication skills required to interface and coordinate with other technicians., • Must hold EPA Universal level certification per Section 608 of the Clean Air Act., • Must hold NATE, HVAC Excellence Professional/Industry, or UA Star Mastery certification., • Experience setting up and managing BAS schedules, set points, and alarms., • Experience with general RCM practices and procedures., • Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned., • Must be able to successfully pass a government background investigation Preferred Experience & Skills • Familiarity with Niagara, • Skills in Maximo or CMMS Required Education • High School Diploma of GED Equivalent

Bachelor's Degree in Engineering or Engineering Technology highly preferred. Senior RF Engineering Technician. Provides support to Digital Engineering for bread-boarding, debugging circuits and firmware/software as testing is being.

Job Description The Control Technician will provide services related to the retro commissioning and calibration of existing control systems. The position will work with project managers and subcontractors to meet project requirements. The control technician will be responsible for assisting in calibration, point to point check out, programming, and testing of Direct Digital Control (DDC) building automation and control systems as directed. Responsibilities/Duties • Helps to maintain accurate and thorough project documentation and redlines, • Complete sensor calibrations on HVAC control systems, • Complete PID loop tuning on equipment programs to optimize equipment operation, • Assist with project sub-contractors where needed, specifically test and balance contractors, • Assist the project team in the engineering of control system hardware and software programming based on project plans, specifications, and other contract documents, • Excellent verbal and written communication skills, • Proficient in Microsoft Office Suite, • Previous experience with Niagara 4 workbench software, • Strong analytical skills, • Experience with electronics and basic electrical circuits, • Thorough understanding of and ability to use appropriate tools, including test equipment to aid in calibration of sensors, • Excellent customer service and ability to work well with others, • At least 1 year of experience with programming, startup and/or commissioning of control systems, • Niagara Ax or N4 certification a plus but not required

Job Description ✨ Engineering Test Technician – Launch Your Career in Aerospace! ✨ Are you passionate about electronics, love solving complex problems, and want to work hands‑on with cutting‑edge aerospace technology? Join our team as an Engineering Test Technician and take your career to new heights—literally. In this role, you’ll be at the heart of aerospace innovation, performing component‑level troubleshooting, electrical testing, and repair on advanced equipment that supports aircraft such as Boeing, Airbus, and Apache Helicopters. If you're a graduate with strong electronics training or a technician eager to grow, this is your opportunity to step into a high‑impact role. 🔧 What You’ll Do • Perform component‑level troubleshooting and repair of electrical components., • Conduct military‑grade electronics testing using oscilloscopes, multimeters, power supplies, and more., • Troubleshoot and support temperature control and deicing systems used in major aircraft platforms., • Read and interpret electrical schematics and technical documentation., • Document test findings, complete accurate data sheets, and write up non‑conformances., • Work hands‑on in a fast‑paced, collaborative engineering environment., • Dedicate 50–75% of your workday to testing and troubleshooting activities.✅ What You Bring, • 3+ years of Electrical Technician experience in aerospace or a military environment, • OR, • A graduate with formal military electronics training or an associate/technology degree in electrical engineering who is ready to dive in and learn quickly., • Proficiency with standard test equipment:, • • Oscilloscopes, • • Digital multimeters, • • Power supplies, • Strong understanding of electrical circuits, testing fundamentals, and safety protocols., • Ability to read schematics, blueprints, and technical diagrams., • Strong communication skills for documenting test results, data sheets, and non‑conformances., • Must be able to work a full‑time, 40‑hour workweek.⭐ Preferred Qualifications, • BSEE or equivalent engineering degree., • Previous experience working with aerospace electronic systems, temperature controls, or deicing units. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Plainview,NY. Application Deadline This position is anticipated to close on Apr 4, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description The Senior Building Controls Technician will provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties: * Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents * Ability to program projects with various levels of complexity * Capable of performing network troubleshooting, database troubleshooting and repair programming * Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations * Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems * Maintains accurate and thorough project documentation and redlines * Provides owner training as required by the project * Executes system commissioning and functional testing * Assist in installation of control hardware * Startup and commission new hardware installations * Provide project management assistance on projects as required, interfacing directly to customers * Supervise sub-contractors and suppliers as needed * Help educate lower-level technicians through on the job training as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 5-10 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times. Salary Range: $80,000-$110,000

Job Description Position Overview The CAD Technician / Cost Estimator is responsible for supporting both the technical design interpretation and cost development process for manufactured parts and assemblies. This role reviews customer RFQs, drawings, and specifications, creates or refines CAD drawings as needed, and develops accurate, competitive, and profitable cost estimates. The position works cross-functionally with Engineering, Production, and Sales to ensure designs are manufacturable and quotes align with company capabilities and margin targets. Key Responsibilities • Review customer RFQs, drawings, and specifications, • Create, modify, and maintain CAD drawings using AutoCAD, • Interpret designs and generate layouts, • Extract dimensions and support calculations, • Utilize iGems for nesting and machine time, • Use AS400 for cost and routing data, • Develop full cost estimates, • Recommend manufacturing methods, • Prepare quotations and lead times, • Collaborate cross-functionally, • Maintain standards and analyze variances Qualifications • Degree or certification in Engineering, Drafting, or Manufacturing, • Manufacturing or job shop experience, • Proficiency in AutoCAD, • Experience with AS400 and iGems preferred, • Strong understanding of manufacturing processes Core Skills • GD&T and drawing interpretation, • CAD drafting skills, • Analytical and cost modeling ability, • Attention to detail, • Communication and teamwork, • Time management Summary This hybrid role bridges design and cost analysis, ensuring accurate CAD outputs and competitive manufacturing estimates. Job Type: Full-time Work Location: In person

Job Description Job Title: Technician III, Facility Maintenance (1st shift) Department: Engineering Job Purpose: Performs trouble shooting, repair, preventive, and corrective maintenance of facility equipment and building systems in assigned area(s) (may include: Utilities, facilities, and HVAC); Maintains key building systems (sprinklers, BMS, etc.), site utilities (boilers, chillers, USP water, HVAC, etc.), and building fabric. Major Accountabilities: Ensures all work carried out and equipment installed is safe, effective and in compliance with the appropriate industry and regulatory (FDA, DEA, OSHA) standards Continuously improves and broadens skills by participating in or initiating training Support Projects Involving New Equipment: advise Project Manager on the quality and suit-ability of proposed equipment, review equipment layouts, work with vendors, assist with validation efforts, write appropriate PM procedures, advise on which spare parts to procure, train teammates, etc. Note: This position may require the labeling, packaging or movement of hazardous (flammable, corrosive, toxic, etc.) waste within the facility. If so, this employee would be trained under OSHAs Hazwoper standard, 29 CFR 1910.120 as an 8-Hour first responder, 24-Hour incident commander, or a 40-Hour incident commander. In lieu of HAZWOPER training, the employee will receive training on the requirements of the Resource Conservation and Recovery Act pursuant to 40 CFR 265.16. All employees that have received the above-mentioned training upon hire will receive annual re-fresher training that covers the Osha Hazwoper standard and the requirements of RCRA. Education: Associate degree in related field or technical equivalent required. Languages: Fluent in written and spoken English Experience: Minimum 6 years of work experience in manufacturing or maintenance environment is required. Experience in regulated environments such as pharmaceutical, medical device, food and beverage is preferred. Key Performance Indicators (Indicate how Performance for this Role will be Measured): Basic Microsoft Office Skills (Word, Excel and Visio) Fluent in English good communications skills both verbal and written, ability to read and understand SOPs and all forms of training materials. Must be available for overtime when needed, including evenings and weekends. Availability for emergency telephone support and call in rotation. Must be able to work in all areas of both Hicksville and Melville Facilities and follow gowning requirements where specified. Must be able to climb ladders and stairs, work in and through construction areas and lift 50 pounds.

Job DescriptionAltus is a full-service fire and life safety services platform. We offer a complete suite of solutions, from the design, engineering, installation, and servicing of state-of-the-art fire and life safety systems to training, consulting, crisis management and business continuity services. Ken-Mar Fire Extinguisher Co., an Altus Fire & Life Safety Company, is looking for a Fire Extinguisher Inspection Technician to join our team! We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our team members. Responsibilities • Inspecting and tagging fire extinguishers, fire hosses, and other fire suppression equipment in accordance with NFPA and local fire codes at client locations., • Perform hydrostatic testing and recharging of fire extinguishers as needed., • Conduct routine maintenance on inspection equipment and vehicles, • Refilling and replacing damaged or expired units, • Documenting service logs and inspection reports and maintaining accurate records of inspections and maintenance performed., • Advising clients on compliance and safety standards, providing excellent customer service and ensuring customer satisfaction., • Provide recommendations for replacement or repairs of fire suppression equipment and systems as necessary., • Participate in ongoing training and certification programs, • Maintain compliance with safety regulations and company policies., • Perform other related duties as assignedRequired Skills, • High school diploma or equivalent required;, • Vocational or technical school degree preferred, • Certification in extinguisher servicing desirable, • Strong knowledge of fire safety regulations and NFPA 10 standards, • Experience with fire extinguisher inspections and maintenance would be an asset., • Valid driver’s license, • OSHA 30 certification preferred

Job Description About the Role: The CNC Programmer and Set Up Technician is a skilled manufacturing role responsible for programming, setting up, and optimizing CNC machining processes for precision components in a regulated manufacturing environment. This position supports high quality production by developing efficient machining strategies, improving cycle times, and ensuring safe, repeatable, and capable processes. The role works closely with engineering, quality, and production teams and is ideal for an experienced Swiss screw machining professional seeking a hands-on, impact driven position. Responsibilities: * Develop, program, and set up CNC machines to support production and new manufacturing projects. * Create CNC programs for Swiss screw machines and optimize machining processes for efficiency and quality. * Select appropriate cutting tools, work holding methods, and machining strategies for new and existing jobs. * Develop and validate machining processes for new product introductions. * Update, modify, and improve existing CNC programs using modern cutting techniques and lean manufacturing principles. * Perform first piece inspections and deliver fully capable processes to the production team. * Troubleshoot CNC machine issues, tooling problems, and program related errors. * Train machine operators on new setups, programs, and machining processes. * Maintain quality, safety, and process control standards throughout manufacturing operations. * Collaborate with engineering, quality, and production teams to achieve operational goals. Qualifications: * High school diploma, GED, or trade school certification. * Minimum of five years of experience operating Swiss screw machines. * At least three years of CNC setup experience in a production environment. * Minimum of two years of CNC programming experience, including Swiss screw machines such as Tornos. * Strong understanding of CNC machining processes, tooling, and work holding techniques. * Ability to read and interpret technical drawings and specifications. * Experience passing first article or first piece inspections and supporting production handoff. Desired Qualifications: * Experience with CAD and CAM software such as SolidWorks or AutoCAD. * Formal in house or external machining and quality systems training. * Familiarity with lean manufacturing and continuous improvement practices. * Strong problem solving skills and ability to work in a fast paced, team oriented manufacturing environment.

Job DescriptionAltus is a full-service fire and life safety services platform. We offer a complete suite of solutions, from the design, engineering, installation, and servicing of state-of-the-art fire and life safety systems to training, consulting, crisis management and business continuity services. Standard Fire Protection, an Altus Fire & Life Safety Company, is looking for a Fire Alarm Technician to join our team! We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our team members. Salary Range: $20.00/hr - $35.00/hrResponsibilities • Install, program, test, and commission fire alarm systems, with emphasis on Simplex and Autocall systems., • Perform routine inspections, testing, and preventive maintenance in compliance with NFPA 72 and local fire codes., • Diagnose and repair system malfunctions, wiring issues, and device failures., • Read and interpret blueprints, schematics, and technical drawings., • Accurately document inspections, service reports, and corrective actions., • Coordinate with project managers, electricians, and inspectors as required., • Provide clear communication to clients regarding system operation, findings, and recommendations., • Maintain tools, test equipment, and company vehicle in good working order., • Respond to after-hours or emergency service calls when needed., • Adhere to all workplace safety policies, including OSHA standards.Required Skills, • High school diploma or equivalent; technical certifications preferred, • 2–5 years of experience as a Fire Alarm Technician or relevant trade experience., • Strong knowledge of fire alarm panels, devices, and wiring methods., • Experience programming and commissioning Simplex, Autocall, and Gamewell systems., • Familiarity with NFPA codes and local fire regulations., • Ability to troubleshoot and resolve technical issues independently., • Valid driver’s license and clean driving record., • Ability to work at heights, lift equipment, and work in construction environments, • Certifications (Preferred):, • FDNY S-98 Certification, • OSHA 30, • SST 10

Job DescriptionDescription: JOB TITLE: Engineering/Electronic Technician Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment to innovation, quality and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Engineering Drafter to join our dynamic team and continue our mission of excellence. Job Summary: The candidate will build, troubleshoot, repair, and maintain custom built as well as commercial production test equipment. This typically includes; specialized electronic production test fixtures, wiring harnesses and other cables, and other miscellaneous electronic or electrical devices. This will require the successful candidate to be able to solder, use basic electronics related hand tools, and have great troubleshooting skills. Key responsibilities: · 5+ years dealing with five or more of the following: · Wiring/soldering of prototype electronic equipment, both discretely wired and PC board based. · Reading, interpreting, modifying, and creating electrical schematic and wiring diagrams · Component level test and troubleshooting (IC amplifier chips, transistors, passives, and magnetics) · Electronics systems and equipment repair (amplifiers, power supplies, signal conditioning, filters) · Electromechanical, mechanical, or electromagnetic systems hands-on experience · Hands-on test and troubleshooting of custom, specific purpose-built electronic test equipment · Use of schematic capture/Spice tools for basic circuit design/troubleshooting · Handle vacuum pumps and plumbing Required Qualifications: · Knowledge of AC, as DC circuitry and components · Knowledge of Circuit phase shifting · Knowledge of AC impedance, AC power calculations · Can interpret and digest technical specifications and procedures · Electrical schematic and wiring diagram reading · Soldering · Use of basic electronics/mechanical hand tools; wire cutters, strippers, de-soldering tools, solder-wick, power drill, Taps, Dyes · Use of basic electrical test equipment operation skills, e.g.; DVM, megger, oscilloscope, signal generator, timers · Knowledge of servers and stepper motos and control systems · Basic mechanical instrument skills, e.g.; micrometers, calipers, dial indicators, precision levels · Computer literacy (Word, Excel, etc.) Preferred Qualifications: · Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment · Microcontroller/microprocessor based digital and/or mixed signal circuit and system familiarity · Magnetic circuit familiarity · Knowledge of environmental testing (temperature, shock, vibration) · Ability to program environmental test chambers and/or vibration tables · An outstanding, can-do attitude willing to go above and beyond the normal · Familiarity with Lathes and Vertical Mills · Familiarity with DAQ’s and Labview/Dasy Lab programs · Knowledge of industrial wiring polyphase power systems · Experience with pressurized gasses · Knowledge of 100th edition handbook of DOE Engineering Fundamentals Course Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job DescriptionDescription: JOB TITLE: RF Technician Job Summary: As a RF Technician, you will perform advanced RF/Microwave system testing, trouble shooting, and electro-mechanical diagnostics for sub-assemblies and high-level system assemblies. This ideal candidate possesses exceptional troubleshooting skills in RF technology and Analog/Digital circuits, with the ability to work independently or collaboratively in a dynamic environment. Key responsibilities: · Conduct testing and troubleshooting of RF/Microwave sub-assemblies and upper-level assemblies according to system specifications. · Develop test procedures and create documentation, including Data Sheets and Acceptance Test Procedures (ATP) · Perform evaluation, acceptance, and sell-off testing in compliance with in-house QA standards and government audits. · Assist in reverse engineering of RF based products and generate schematics from existing circuits. · Utilize commercial test equipment, including Spectrum Analyzers, Vector Network Analyzers, Power Meters, and Oscilloscopes, with proficiency. · Calibrate, maintain, and repair electronic test equipment and oversee the upkeep of the Environmental Testing Facility assets. · Maintain and manage the computerized calibration database for IM & TE (Inspection, Measuring and Test Equipment) assets. · Recall IM & TE due for calibration to ensure operational accuracy and compliance. · Work independently and as part of a team with minimal supervision to meet project deadlines and deliver high-quality results. · Collaborate with engineering team to resolve technical challenges and optimize performance. Required Qualifications: · Associate’s degree in Electrical Technology/Electronics or equivalent · Extensive experience (7+ years) in a fast-paced repair or production environment may be considered in lieu of formal education. · Proficient in the use of advanced RF test equipment, including Spectrum Analyzers, Vector Network Analyzers Power Meters and Oscilloscopes. · Experience in developing and documenting test procedures. · Strong analytical, organizational and communication skills. Preferred Qualifications: · Familiarity with ESD handling protocols and production safety standards. · Experience with Power Amplifiers and Low Noise Amplifiers. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Position Overview The Field Service Fiber & Coax Technician is responsible for the installation, activation, maintenance, and repair of fiber optic and coaxial telecommunications services in residential and commercial environments. This role requires strong technical knowledge of FTTH and Coaxial networks, hands-on field experience, and a customer-first mindset. Technicians work independently and as part of a team to ensure reliable, high-quality service delivery while meeting safety, quality, and productivity standards. Primary Responsibilities Installation & Activation • Install, test, and activate fiber optic and coax services at customer premises, including ONTs, modems, routers, and related equipment, • Perform inside and outside plant work, including aerial, underground, and inbuilding installations, • Pull, route, label, terminate, and splice fiber optic and coaxial cables in accordance with engineering specifications, • Configure and verify proper signal levels, light loss, and network performance prior to service activation Troubleshooting & Maintenance • Diagnose and resolve service issues related to FTTH and Coaxial networks, including signal loss, intermittent connectivity, and hardware failures, • Use diagnostic tools such as SLM’s, OTDRs, optical power meters, and light meters to identify faults and validate repairs, • Perform preventative maintenance and corrective repairs on fiber and coax infrastructure • Escalate complex network issues to engineering or network operations teams as required Customer Service & Communication • Deliver professional, courteous, and knowledgeable on-site customer service, • Clearly explain installation processes, service functionality, and basic troubleshooting steps to customers • Address customer concerns and ensure service satisfaction before completing work, • Represent the company positively at all customer locations Documentation & Compliance • Accurately complete work orders, service tickets, and as-built documentation using company systems, • Maintain detailed service records, including test results, materials used, and time on task, • Follow all company policies, safety guidelines, and industry standards, including OSHA and local regulations, • Ensure proper care and accountability of company vehicles, tools, and equipment Safety & Field Operations • Safely operate vehicles and equipment while working in residential and commercial environments, • Work at heights using ladders, bucket trucks, and poles when required, • Work outdoors in varying weather conditions and confined spaces, • Participate in safety training and adhere to best practices for fiber handling and splicing Required Qualifications • Preferred 1+ years of hands-on experience in fiber optic/coaxial or telecommunications field service roles • Solid understanding of FTTH and Coaxial network architecture and troubleshooting techniques, • Proficiency with fiber splicing equipment, OTDRs, and optical testing tools, • Ability to read and interpret network diagrams, work orders, and engineering documentation • Comfortable working independently with minimal supervision, • Valid driver’s license with a clean driving record, • Strong communication, organizational, and time management skills Preferred Qualifications • Fiber optic certification (FOA, ETA, or equivalent), • Experience with aerial and underground fiber construction and maintenance, • Familiarity with GPON and Active Ethernet systems, • Experience with customer premises equipment (ONTs, routers, Wi-Fi systems), • Prior experience in an ISP, MSO, or telecommunications service provider environment Physical & Work Environment Requirements, • Ability to lift and carry up to 80 lbs, • Ability to climb ladders and work at heights for extended periods, • Ability to bend, kneel, crawl, and work in tight or confined spaces, • Ability to work flexible schedules, including occasional evenings, weekends, holidays, or on-call rotations

Job Description The IoTMS Technician III is responsible for the configuration and troubleshooting of technology devices and onboarding of new products and offerings. This role involves programming devices to ensure optimal performance, conducting tests to verify functionality, and kitting and packing devices for shipment. The technician collaborates with stakeholders such as the engineering and quality teams to enhance device configuration efficiency and accuracy while maintaining thorough documentation of adherence to all processes. ESSENTIAL FUNCTIONS Financial • Ensure cost-effective testing, configuration, imaging, kitting, packing processes for shipment of customer orders., • Optimize refurbishing and/or repair of wireless devices, using inventory and time efficiently. Customer • Configure wireless communication devices and other related hardware quickly and accurately., • Ensure optimal performance by adjusting settings and performing necessary calibrations., • Complete accurate shipment of orders for delivery on time. Business Process • Streamline device return, configuration, and order preparation processes., • Follow documented procedures for device testing, repair, refurbishing, imaging and configuration., • Collaborate with team members and stakeholders to share best practices and troubleshoot complex issues., • Provide Technical process support and training to Production personnel, • Maintain knowledge on OEM specific HW, Connectivity, and applicable Platforms, • Conduct Production Feasibility Assessment., • Provide time studies pertaining to Production processes., • Support process improvement initiatives and activities., • Provide engineering support to determine root cause and implement corrective actions on internal and customer related manufacturing problems. • Troubleshoot technical/process issues. Learning and Development • Engage in continuous personal development by seeking feedback and participating in training opportunities., • Mentor junior technicians and contribute to team knowledge-sharing and training sessions to improve collective skills and foster a culture of continuous learning and improvement. QUALIFICATIONS • High School Diploma, GED, or equivalent., • 3+ years’ experience in a technical and/or manufacturing role preferred., • Experience writing, testing, or debugging software., • Experience with electrical, mechanical, and computer hardware., • Experience working in an ISO (9001 & 13485) environment., • Ability to read and analyze information and data and perform basic math., • Proficient using Microsoft Office applications., • Experience providing technical customer service, such as tech support and/or installation/repair service preferred. SKILLS/COMPETENCIES • Strong communication skills, both verbal and written, with a customer-centric approach., • Proficiency in problem-solving and critical thinking., • Ability to work independently and as part of a team., • Ability to multi-task and contribute Kore Values Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. Working Conditions The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to remain stationary; move; lift and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. “KORE Wireless Group, Inc. is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.”

Job DescriptionAltus is a full-service fire and life safety services platform. We offer a complete suite of solutions, from the design, engineering, installation, and servicing of state-of-the-art fire and life safety systems to training, consulting, crisis management and business continuity services. Standard Fire Protection, an Altus Fire & Life Safety Company, is looking for a Kitchen Hood Suppression Systems Technician to join our team! We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our team members. Salary Range: $20.00/hr - $35.00/hrResponsibilities • Install, inspect, test, service, and maintain kitchen hood fire suppression systems, • Perform work in compliance with FDNY codes, NFPA standards, and company procedures, • Diagnose system issues and complete repairs as needed, • Complete service reports and documentation accurately and on time, • Communicate professionally with clients, supervisors, and team members, • Maintain tools, equipment, and service vehicle in good condition, • Adhere to all safety regulations and OSHA standardsRequired Skills, • Experience: At least 2+ years of hands-on experience with kitchen hood suppression systems, • Licensing/Certifications:, • FDNY Certificate of Fitness S-17 (required), • OSHA 30 certification (required), • Technical Skills:, • Familiarity and experience with Ansul systems, • Preferred Skills:, • Experience working in commercial kitchens or restaurant environments, • Strong troubleshooting and problem-solving skills

Job DescriptionCompany Description SOCOTEC is a provider of niche consulting services within the architecture, engineering and construction industries focusing on high-performance buildings and specialty structures. Through an integrated, holistic approach, our professionals provide solutions for building envelope, energy efficiency, sustainability, code advisory and construction advisory projects SOCOTEC’s combination of expertise, experience and methods are increasingly recognized as best-in-class fueling significant growth. SOCOTEC is proud to announce that it has been officially certified as a Great Place to Work by the renowned global authority on workplace culture, Great Place to Work®. Job Description The Field Operations Project Manager will oversee and coordinate construction materials testing and special inspection services for multiple projects within assigned territories. This role requires strong technical knowledge, exceptional organizational skills, and the ability to manage field personnel while ensuring compliance with industry standards and client requirements. Key Responsibilities: Project Management • Plan, coordinate, and oversee field testing and inspection activities across multiple construction sites, • Manage project schedules, budgets, and resource allocation to ensure timely delivery of services, • Serve as primary point of contact for clients, contractors, and internal teams, • Prepare project scope of work and cost estimates for specialty work when needed, • Ensure testing and inspection services comply with applicable codes, standards, and specifications (ACI, ASTM, IBC, etc.), • Review technical reports prepared by field technicians and inspectors, • Provide technical guidance and support to field personnel, • Conduct quality control reviews of field operations and testing procedures, • Supervise, mentor, and evaluate field technicians and inspectors, • Coordinate staffing assignments and maintain adequate coverage across all active projects, • Conduct performance reviews and identify training needs, • Maintain strong relationships with clients, architects, engineers, and contractors, • Address client concerns and resolve issues promptly and professionally, • Identify opportunities for additional services and business development, • Ensure strict adherence to company safety policies and OSHA regulations, • Complete all duties as assigned by your managerQualifications Education and Experience • Minimum 5-7 years of experience in construction materials testing and special inspections, • ACI Concrete Field Testing Technician - Grade I (required), • ICC Special Inspector certifications (Structural Steel, Concrete, Masonry) preferred, • NICET certification in Construction Materials Testing or related discipline preferred, • Thorough understanding of construction materials, testing procedures, and quality control principles, • Proficiency in relevant codes and standards (IBC, ACI 318, ASTM, etc.), • Strong knowledge of concrete, soils, asphalt, structural steel, and masonry testing, • Excellent organizational and time management abilities, • Strong verbal and written communication skills, • Proven leadership and team-building capabilities, • Analytical thinking and problem-solving skills, • Ability to work independently and make sound decisions, • Position requires frequent travel to construction sites within assigned territory, • Must be able to work in outdoor environments and various weather conditions, • Flexibility to work extended hours, weekends, or emergency calls as needed, • Physical requirements include walking construction sites, climbing stairs/ladders, and lifting up to 50 pounds Additional Information SOCOTEC offers a competitive benefits package and an exciting & inclusive company culture where we foster learning and growth through our mentorship program, continuing education support, and other initiatives. For more information, please visit Job Type: Full-Time Your information will be kept confidential according to EEO guidelines. SOCOTEC is an Equal Opportunity Employer. SOCOTEC is an Equal Opportunity Employer.

JoinT2 Utility Engineers(T2ue) in Oceanside, NY as part of our Subsurface Utility Engineering (SUE) field tech team. Our SUE field techs gain on-the-job training in utility locating and utility designating, along with knowledge and experience in Subsurface Utility Engineering and surveying methods a

Preferred Skills PMP Certification Primavera P6 Experience Familiar with Construction Work Scopes Familiar with Engineering Concepts Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal

Job Title: Manager, Electrical Engineering (FPGA) Job Code: 34472 Job Location: Rochester, NY Job Schedule: 9/80 - Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off OR 5/8: Employees work 8 hours per day, 5 days a week Job Description: L3harr

Primary interface with all stakeholders including internal and external customers, project engineering, executive management, subcontractors, and vendors. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel.

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Assist in the analysis and modeling of near and long-term results BS degree in a technical discipline such as

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Responsibilities Serve as Point of Contact to Client and Consultants Lead the project team as the Client’

Abacus Service Corporation - - Responsibilities: Troubleshoots repairs and maintains a wide variety of Compounding, Packaging and Facilities equipment.

Nesco Resource - - Responsibilities: performing routine maintenance on all CNC machinery and equipment; troubleshooting and repairing machinery and equipment; ensuring a safe and functional environment; The Machine Maintenance Technician will perform maintenance and repair of all CNC machinery and

Island Hospitality Management - - Responsibilities: Perform routine and preventative maintenance on resort facilities; Complete minor repairs to rental homes and facilities; Inspect irrigation systems, playgrounds, pool/spa, and recreational amenities; Maintain resort pool(s) and test chemical leve

Suburban Propane - - Responsibilities: Install, maintain, troubleshoot and repair fuel systems and appliances; Maintain the service vehicle including inspections and reporting conditions; Bill customers for services rendered and manage funds and inventory; Deliver fuel as needed in a safe and effic

Abacus Service Corporation - - Responsibilities: Assist in the compounding and mixing of pharmaceutical bulk product; Perform cleaning and sanitization; Follow manufacturing instructions.

Johnson Controls - - Responsibilities: Receive service calls from the Service Resource Center and identify equipment problems; Perform service and repairs on sprinkler systems for commercial, industrial, and residential applications; Read and interpret blueprints, submittals, and manuals to diagnos

Compass Group - 8 Roberts Lane - Responsibilities: Responds to dispatch calls for machine repairs using company-owned vehicle; Calls on existing customers to determine adequacy of service; listens to and resolves service complaints; Visually inspects and listens to machines to determine causes of ma

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car

Nesco Resource - - Responsibilities: Assemble, test, and inspect aerospace electronic components to exacting specifications.

Nesco Resource - - Responsibilities: Assemble composite and electrometric materials using fixtures and tooling per specifications.

Atria Senior Living - - Responsibilities: Diagnose and repair problems in HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.Complete assigned service requests and repairs consiste

L3harris is seeking an Electrical Engineering Manager with an FPGA/Digital Design background to support our development of secure tactical communication products. BS degree in Electrical or Computer Engineering discipline.

Aerotek - - Responsibilities: Perform a range of tasks from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies; Work from diagrams and drawings to make initial layouts, utilizing hand and/or power tools, jigs, and saws; Conduct c

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s degree in Construction Management, Engineering, or equivalent combination of experience and ed

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Minimum 20+ years of successful construction project management experience with emphasis on major healthcar

BDG Architects is currently seeking a skilled, imaginative, and driven Project Manager to join our team in our Northeast studio.This full-time position will be situated in our Mineola, NY office.Candidates must possess a minimum of 7 years of experience.The role will involve working on a variety of

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Qualifications Minimum 10 years of successful construction project management experience in ground up constru

Join a leading moving and relocation company delivering complex commercial office and industrial moves across New York, NY.This Project Manager role sits within the commercial relocation sector, overseeing end-to-end O&I projects for corporate clients.It is ideal for an experienced relocation pr

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s Degree in Construction Management, Engineering, or related discipline.

The objective of the Industrial Maintetnance Technician is to support plant production machinery and facility maintenance activities, as required.

Bachelor’s Degree in Mechanical Engineering, Master's Degree a plus Professional Engineering (PE) license required Proven track record of managing and designing multiple projects at the same time and meet deadlines Knowledge of NYS / NYC / International Building Codes. Ranked among the natio