Engineering technician jobs in Deer Park, New YorkCreate job alerts

Job DescriptionDescription: About GenServe:? GenServe is the nation’s leading independent provider of scheduled and emergency power generator maintenance, repair, and sales, primarily serving commercial customers. Established in 1990, GenServe has the largest team of EGSA-certified technicians in the Northeast and a growing presence across the U.S. Through a combination of organic growth and strategic acquisitions, GenServe is rapidly expanding its national footprint as a one-stop shop for generator solutions.? Position Summary: As a Level 5 Generator Technician at GenServe, you are recognized as a master technician and a key leader in the field. This role requires expert-level diagnostics, repair, and system commissioning capabilities across all generator platforms and control systems. You will lead complex projects, resolve high-level technical issues, support engineering and sales teams, and mentor the next generation of technicians. Key Responsibilities: • Lead and perform advanced service, troubleshooting, and repairs on all generator systems, including diesel, natural gas, bi-fuel, and paralleling systems., • Act as a technical lead for complex installations, retrofits, and high-capacity generator applications., • Program and troubleshoot advanced PLCs, switchgear, load banks, and synchronization systems., • Provide expert diagnostics and root-cause analysis on recurring or critical failures., • Work closely with engineering teams to design and implement custom solutions for specialized customer requirements., • Oversee and verify commissioning of new systems, ensuring full operational compliance with codes and standards., • Commission new generator systems and controls, ensuring compliance with GenServe and industry standards., • Serve as a field resource and trainer for Levels 1 through 4 technicians., • Conduct advanced OEM and EGSA-level training within the company., • Write detailed technical service reports, including findings and recommended solutions., • Provide technical support and consultation to the sales, project management, and operations teams., • Maintain the highest safety and quality standards in all work performed., • Participate in a rotating on-call schedule, including evenings, weekends, and holidays, to respond to emergency service requests and ensure timely resolution of customer issues., • High school diploma or GED required; associate degree or higher in Electrical, Mechanical, or Power Generation Technology preferred., • Minimum 10 years of hands-on generator service experience, including commercial, industrial, and mission-critical systems., • EGSA Certified Technician – Journeyman., • Extensive experience with OEMs such as Generac, Cummins, Kohler, MTU, and CAT., • Expert in electrical theory, engine operation, paralleling systems, and control integration., • Strong knowledge of NFPA 110, NFPA 70E and OSHA standards., • Proven ability to lead large projects and coordinate with cross-functional teams., • Valid driver’s license with a clean driving record., • Excellent communication, leadership, and documentation skills., • Proficient with remote monitoring systems and network communications., • Experience leading field commissioning for multi-generator systems or data center infrastructure., • Proficiency in Paralleling Switchgear Systems., • Proficiency in SCADA, remote monitoring systems, and network configurations., • Primarily field-based with occasional office coordination., • Requires travel to job sites including remote and high-demand environments., • National leader in emergency power systems., • Competitive compensation and senior technician incentives., • Access to cutting-edge tools, diagnostic equipment, and OEM training., • Leadership opportunities and advancement pathways., • Supportive, safety-driven company culture. Requirements:

Job Description About the Role: The Lighting Control Field Technician will play a crucial role in the installation, maintenance, and troubleshooting of advanced lighting control systems for various clients. This position requires a deep understanding of both hardware and software components to ensure optimal performance and user satisfaction. The technician will work closely with project managers and clients to deliver tailored solutions that meet specific lighting needs. Additionally, the role involves conducting on-site training for clients to ensure they are proficient in using the systems installed. Ultimately, the technician's expertise will contribute to enhancing the overall ambiance and functionality of spaces through effective lighting control. Minimum Qualifications: • High school diploma or equivalent., • Proven experience in the installation and maintenance of lighting control systems., • Associate's degree in a related field such as electrical engineering or technology., • Certification in lighting control systems or related technologies., • Install and configure lighting control systems according to project specifications and client requirements., • Perform routine maintenance and troubleshooting of existing lighting systems to ensure optimal performance., • Collaborate with project managers and clients to assess lighting needs and provide tailored solutions., • Conduct on-site training sessions for clients to familiarize them with the operation of their lighting control systems. The required skills for this position include a solid understanding of electrical systems, which is essential for safely installing and troubleshooting lighting controls. Technical proficiency in both hardware and software components allows the technician to effectively configure systems to meet client specifications. Strong communication skills are necessary for conducting training sessions and collaborating with clients and project managers. Problem-solving abilities are crucial for diagnosing issues and implementing effective solutions in a timely manner. Preferred skills, such as programming knowledge, enhance the technician's capability to customize systems further, providing clients with a more tailored experience.

Job DescriptionEnvironmental assessment company hiring a Field Technician with hands on skills, must be comfortable working at height This Jobot Job is hosted by: Tony Marasco Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $25 - $28 per hour A bit about us: We have over 40 years of experience providing environmental quality testing, management and consulting services to municipalities, utilities, healthcare facilities, private industry, consulting firms and government agencies. We provide customized solutions and services to form the foundation of a solid environmental management program. Why join us? Technical training Career development 15% travel Job Details Stack testing firm located in Long Island NY , performs stationary source emission evaluations, air permit compliance for combustion sources. Utilizing USEPA reference test methods. Needing hands on working with hand tools, computer knowledge excel, word etc. Conduct field tests, provide engineering team data and help with reports. Must work at heights on smoke stacks, hoist 40 lbs, have drivers license, car. Local work in and around NYC metro area, out of town 10-15 % of work load. will train. The job entails starting at the office each morning to collect the company van and the sample kits for each day, and going to client sites to help collect samples and work on smoke stacks. Required Qualifications: • Mechanical technician professional experience OR Technical School education, • Strong hands on mechanical skills, • Basic mechanical and electrical systems experience, • Basic computer skills, • Valid Drivers license (will drive company van), • Comfortable with heights (will work on smoke stacks), • Ability to lift 45 pounds, • Reliability Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description The Building People, LLC, has a position open for a full-time HVAC/R Technician for the facilities engineering program to support a federal Agency. The HVAC Technician will have a strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all systems. Individuals are expected to demonstrate technical expertise in HVAC trade and be multi-skilled in others (Electrical, Piping/Plumbing, Central Utility Plant Operations) in order to successfully complete daily/weekly work assignments. Responsibilities will include, but not be limited to: • Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep facility and building systems up to applicable standards as assigned, • Maintains responsibility for facility services, corrective maintenance, inventory control, general maintenance and technical proficiency., • Maintenance of the equipment will include cleaning, inspecting, calibrating and changing parts to maintain the HVAC systems and associated equipment at optimum performance levels, • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc., • Knowledge of the tools, materials, and test equipment used in the installation,, • Maintenance and repair of air conditioning/refrigeration HVAC control systems., • Install, maintain, and repair HVAC controls, including DDC, pneumatic, electric, and electronic controls., • Troubleshoots and repairs HVAC/BAS control problems, including dampers, coils, HVAC steam related controls, air handling equipment, and all types of valves., • Adjusts and calibrates pneumatic/electronic devices to balance all HVAC systems., • Inspects and services controls on a scheduled basis., • Responds to service calls and troubleshoots problems., • Prepares estimates for the repair and/or installation of new Mechanical, Electrical and Plumping systems and makes recommendations for such repairs and services., • Troubleshoots and tests controls using test gauges, amp meters, hydro thermographs, and computers., • Repair equipment and perform corrective maintenance in assigned programmatic area(s)., • Inspect and test equipment / systems to ensure that technical integrity is maintained and if necessary, proposes appropriate corrective action., • Review pertinent technical manuals to remain current with technology and electrical safety codes., • Work indoors & outdoors in the installation and maintenance of a wide - array of technical equipment; use of ladders, safety equipment and ability to navigate rooftops and tight spaces may be required, • Applies technical knowledge to perform simple or routine tasks following detailed instructions., • Receives technical guidance, as required, from supervisor or higher-level technician., • Five (5) years of commercial HVAC/R journeyman level experience., • Communication skills required to interface and coordinate with other technicians., • Must hold EPA Universal level certification per Section 608 of the Clean Air Act., • Must hold NATE, HVAC Excellence Professional/Industry, or UA Star Mastery certification., • Experience setting up and managing BAS schedules, set points, and alarms., • Experience with general RCM practices and procedures., • Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned., • Must be able to successfully pass a government background investigation Preferred Experience & Skills • Familiarity with Niagara, • Skills in Maximo or CMMS Required Education • High School Diploma of GED Equivalent

Job DescriptionDescription: JOB TITLE: RF Technician Job Summary: As a RF Technician, you will perform advanced RF/Microwave system testing, trouble shooting, and electro-mechanical diagnostics for sub-assemblies and high-level system assemblies. This ideal candidate possesses exceptional troubleshooting skills in RF technology and Analog/Digital circuits, with the ability to work independently or collaboratively in a dynamic environment. Key responsibilities: · Conduct testing and troubleshooting of RF/Microwave sub-assemblies and upper-level assemblies according to system specifications. · Develop test procedures and create documentation, including Data Sheets and Acceptance Test Procedures (ATP) · Perform evaluation, acceptance, and sell-off testing in compliance with in-house QA standards and government audits. · Assist in reverse engineering of RF based products and generate schematics from existing circuits. · Utilize commercial test equipment, including Spectrum Analyzers, Vector Network Analyzers, Power Meters, and Oscilloscopes, with proficiency. · Calibrate, maintain, and repair electronic test equipment and oversee the upkeep of the Environmental Testing Facility assets. · Maintain and manage the computerized calibration database for IM & TE (Inspection, Measuring and Test Equipment) assets. · Recall IM & TE due for calibration to ensure operational accuracy and compliance. · Work independently and as part of a team with minimal supervision to meet project deadlines and deliver high-quality results. · Collaborate with engineering team to resolve technical challenges and optimize performance. Required Qualifications: · Associate’s degree in Electrical Technology/Electronics or equivalent · Extensive experience (7+ years) in a fast-paced repair or production environment may be considered in lieu of formal education. · Proficient in the use of advanced RF test equipment, including Spectrum Analyzers, Vector Network Analyzers Power Meters and Oscilloscopes. · Experience in developing and documenting test procedures. · Strong analytical, organizational and communication skills. Preferred Qualifications: · Familiarity with ESD handling protocols and production safety standards. · Experience with Power Amplifiers and Low Noise Amplifiers. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job DescriptionDescription: JOB TITLE: Engineering/Electronic Technician Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment to innovation, quality and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Engineering Drafter to join our dynamic team and continue our mission of excellence. Job Summary: The candidate will build, troubleshoot, repair, and maintain custom built as well as commercial production test equipment. This typically includes; specialized electronic production test fixtures, wiring harnesses and other cables, and other miscellaneous electronic or electrical devices. This will require the successful candidate to be able to solder, use basic electronics related hand tools, and have great troubleshooting skills. Key responsibilities: · 5+ years dealing with five or more of the following: · Wiring/soldering of prototype electronic equipment, both discretely wired and PC board based. · Reading, interpreting, modifying, and creating electrical schematic and wiring diagrams · Component level test and troubleshooting (IC amplifier chips, transistors, passives, and magnetics) · Electronics systems and equipment repair (amplifiers, power supplies, signal conditioning, filters) · Electromechanical, mechanical, or electromagnetic systems hands-on experience · Hands-on test and troubleshooting of custom, specific purpose-built electronic test equipment · Use of schematic capture/Spice tools for basic circuit design/troubleshooting · Handle vacuum pumps and plumbing Required Qualifications: · Knowledge of AC, as DC circuitry and components · Knowledge of Circuit phase shifting · Knowledge of AC impedance, AC power calculations · Can interpret and digest technical specifications and procedures · Electrical schematic and wiring diagram reading · Soldering · Use of basic electronics/mechanical hand tools; wire cutters, strippers, de-soldering tools, solder-wick, power drill, Taps, Dyes · Use of basic electrical test equipment operation skills, e.g.; DVM, megger, oscilloscope, signal generator, timers · Knowledge of servers and stepper motos and control systems · Basic mechanical instrument skills, e.g.; micrometers, calipers, dial indicators, precision levels · Computer literacy (Word, Excel, etc.) Preferred Qualifications: · Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment · Microcontroller/microprocessor based digital and/or mixed signal circuit and system familiarity · Magnetic circuit familiarity · Knowledge of environmental testing (temperature, shock, vibration) · Ability to program environmental test chambers and/or vibration tables · An outstanding, can-do attitude willing to go above and beyond the normal · Familiarity with Lathes and Vertical Mills · Familiarity with DAQ’s and Labview/Dasy Lab programs · Knowledge of industrial wiring polyphase power systems · Experience with pressurized gasses · Knowledge of 100th edition handbook of DOE Engineering Fundamentals Course Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description The Senior Building Controls Technician will provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties: * Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents * Ability to program projects with various levels of complexity * Capable of performing network troubleshooting, database troubleshooting and repair programming * Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations * Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems * Maintains accurate and thorough project documentation and redlines * Provides owner training as required by the project * Executes system commissioning and functional testing * Assist in installation of control hardware * Startup and commission new hardware installations * Provide project management assistance on projects as required, interfacing directly to customers * Supervise sub-contractors and suppliers as needed * Help educate lower-level technicians through on the job training as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 5-10 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times. Salary Range: $80,000-$110,000

Job DescriptionDescription: Job Description The individual will be doing hands-on repair, assembly, soldering, or re-manufacture of mechanical and electromechanical components utilizing company provided approved data. The technician will be responsible for testing, troubleshooting, and repairing electrical, electromechanical, and machined assemblies sent in for repair evaluation by our customers. Training, technical documents, and oversight are provided by PG Aerotech management. Essential Responsibilities • Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training., • Maintain a clean, clutter-free work area., • Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online)., • Work with co-workers to achieve goals and objectives set by management., • Work with management to develop new processes and procedures as necessary., • Assist in basic shop upkeep and maintenance including routine cleaning of the technician’s work area and periodic shop maintenance assignments., • The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check., • 2 or more years of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered., • Technician candidate must own his or her own set of basic hand tools., • Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering., • The ability to follow instructions and work to a written procedure concisely and accurately., • Must be fluent in speaking, reading and writing English., • Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required., • Interested individuals must be detail-oriented, self-motivated, and highly organized., • Experience using a computer., • Punctual and reliable., • Valid driver’s license., • The ability to lift up to 20 lbs., • Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other), • Constant hand manipulation of small to medium, • Sitting or standing for long periods of time, • Frequent use of hand tools and other repair equipment, • High school diploma or GED is required., • Associates degree or higher in a related technical field preferred., • Trade schooling or related industry experience required., • Hourly position commensurate with experience and skill level and/or certifications. ($24 - $32) PG Aerotech is an equal opportunity employer. Visit our website at PG Aerotech | Jet Parts Engineering Requirements:

Job Description Semiconductor Process Technician (Wafer Fabrication) Location: Suffolk County NY On-Premises Full-time 2nd Shift (1:30 PM – 10:00 PM) Important: MUST BE U.S. CITIZEN OR GREEN CARD HOLDER Local candidates ONLY. About Our Client Our client has been a pioneer in advanced microelectronics for more than five decades, supplying the aerospace, defense, and medical industries with high-reliability technologies that power mission-critical systems. Their reputation is built on precision, innovation, and a relentless commitment to quality. Joining this team means stepping into an environment where every wafer you touch has real-world impact—keeping aircraft airborne, enabling advanced defense systems, and ensuring medical devices perform when lives depend on it. This is not just a job; it’s a career path in one of the most innovative and future-proof industries today. Why This Role Matters You won’t just “run equipment”—you’ll play a critical role in building high-performance semiconductor products that are trusted in some of the toughest environments on Earth. This is a career-track role in semiconductor manufacturing. You’ll gain valuable hands-on skills, master advanced processes, and open doors to future opportunities in process engineering, equipment support, or leadership. What You’ll Gain • Career Growth – Enter at the technician level and position yourself for advancement into engineering or leadership roles., • Cutting-Edge Training – Learn deposition, etching, photolithography, and other core semiconductor processes., • Impactful Work – Your contributions directly support mission-critical aerospace, defense, and medical applications., • Strong Benefits – Medical, dental, 401(k) with company match, free life insurance, tuition reimbursement, and more., • Operate semiconductor fabrication equipment (deposition, etching, photolithography)., • Inspect wafers with precision tools to ensure product quality., • Perform preventative maintenance and troubleshoot minor issues., • Collaborate with QA and process teams to improve yield and efficiency., • Keep accurate process logs and contribute to continuous improvement., • Associate degree in Microelectronics, Chemical Engineering, Materials Science, or related field (Bachelor’s a plus)., • 1–2 years of hands-on experience in semiconductor processing, wet chemistry, or a technical manufacturing environment., • Analytical mindset and problem-solving skills., • Strong teamwork and communication abilities., • U.S. citizenship or permanent residency (required by export controls).

Job DescriptionRF Engineering Technician Location: Farmingdale, NY Job Type: Permanent, Full-Time Schedule: 9/80 Work Week (Nine-hour days with alternating Fridays off) About the Role Are you passionate about RF technology and eager to work hands-on with advanced electronic systems? Whether you’re a graduate with strong RF fundamentals or a seasoned technician with years of experience, this role offers an exciting opportunity to repair, test, and troubleshoot complex electronic equipment, including RF and microwave components. You’ll collaborate with production, test, field service, and engineering teams to ensure our equipment meets the highest performance standards. Key Responsibilities • Repair and troubleshoot electronic equipment such as printed circuit boards, multiplexing systems, and amplifiers, • Diagnose operational failures using advanced test equipment, • Reconstruct or replace defective parts and adjust mechanical components, • Review engineering change notices and apply updates to equipment design, • Align, adjust, and calibrate equipment to precise specifications, • Apply coatings or paint to components as needed, • Test equipment to ensure compliance with documented performance standards, • Maintain accurate records of repairs, calibrations, and tests in a computer database, • Provide technical support during product investigations, • Associate’s or Bachelor’s Degree in Electronics, Electrical Engineering, or related field (or equivalent hands-on experience), • Strong understanding of RF and microwave principles, • Familiarity with oscilloscopes, multimeters, and other diagnostic tools, • Skilled in troubleshooting and repairing electronic components, • Experience testing circuits and RF systems, • Knowledge of engineering documentation and change notices, • Understanding of electrical engineering principlesWhy Join Us?, • Entry-Level Friendly: Recent graduates with strong RF knowledge will receive comprehensive training and mentorship, • Experienced Technicians Welcome: Bring your expertise and take on complex challenges with cutting-edge technology, • Collaborative team environment with opportunities for growth Medical & Prescription Coverage Employees have access to a high-deductible comprehensive medical plan through BlueCross BlueShield, which includes: - Preventive care at no cost (e.g., routine exams, immunizations, cancer screenings) - Office visits, lab work, and diagnostic imaging with copays - Emergency and urgent care services - Inpatient and outpatient hospitalization - Maternity care and newborn services - Mental health and substance abuse treatment Prescription drug coverage includes a mandatory generic substitution policy, with tiered copays applied after the deductible. Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on Dec 20, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description The Control Technician will provide services related to the retro commissioning and calibration of existing control systems. The position will work with project managers and subcontractors to meet project requirements. The control technician will be responsible for assisting in calibration, point to point check out, programming, and testing of Direct Digital Control (DDC) building automation and control systems as directed. Responsibilities/Duties • Helps to maintain accurate and thorough project documentation and redlines, • Complete sensor calibrations on HVAC control systems, • Complete PID loop tuning on equipment programs to optimize equipment operation, • Assist with project sub-contractors where needed, specifically test and balance contractors, • Assist the project team in the engineering of control system hardware and software programming based on project plans, specifications, and other contract documents, • Excellent verbal and written communication skills, • Proficient in Microsoft Office Suite, • Previous experience with Niagara 4 workbench software, • Strong analytical skills, • Experience with electronics and basic electrical circuits, • Thorough understanding of and ability to use appropriate tools, including test equipment to aid in calibration of sensors, • Excellent customer service and ability to work well with others, • At least 1 year of experience with programming, startup and/or commissioning of control systems, • Niagara Ax or N4 certification a plus but not required, • Physically able to climb overhead or crawl under spaces to complete jobs

We are seeking a skilled Telecommunications Technician to join a leading provider of advanced network solutions. This role focuses on the installation, configuration, troubleshooting, and maintenance of optical transport and DWDM networks across customer premises, COLO, and data center locations. The ideal candidate will have hands-on experience with Cisco MPLS, Ciena 6500 optical systems, ROADM, SONET networks, and dark fiber OTDR testing. Minimum Qualifications: • 5+ years of experience in installation, provisioning, and repair of telecom equipment., • Strong understanding of Ethernet, DWDM, CWDM, WAN/LAN, and TCP/IP applications., • Hands-on experience with Ciena 6500 series (provisioning, alarms, optical power management)., • Proficient with OTDRs (EXFO, JDSU, VeEx) and associated testing/reporting tools., • Knowledge of DWDM systems, optical theory, and fiber characterization., • Familiarity with Netcracker a plus., • Proficient in Microsoft Office Suite., • Install, configure, and maintain Ethernet, DWDM, CWDM, and ROADM technologies using Netcracker designs and provided M&Ps., • Travel to remote sites and data centers for equipment installation and maintenance., • Perform OTDR, power meter/light source, and insertion loss tests on dark fiber networks; analyze OTDR traces to identify faults and anomalies., • Execute cabling labeling, patching, and cross-connects in telecom rooms and data centers., • Coordinate with Engineering & Activation teams for circuit turn-ups, migrations, and troubleshooting., • Document test results, fiber layouts, equipment configurations, and work orders., • Provision, test, and turn up network facility circuits in Data Center and COLO locations., • Ensure compliance with safety standards, regulations, and company policies., • Connect AC/DC power to telecom equipment and verify backup battery functionality., • Participate in on-call rotation and work flexible hours as needed.

Job Title: NOC Technician – Telecom Networks Location: Melville, NY | Rochester, NY | Doral, FL Shift: Friday–Monday, 2 PM–1 AM (1-hour lunch) Role Summary: Monitor and maintain nationwide telecom networks. Respond to alarms and outages, perform initial troubleshooting, and escalate issues to engineers to ensure continuous network operations. Key Responsibilities: • Monitor network dashboards for alarms and outages, • Perform basic diagnostics and initial triage, • Create, track, and manage incident tickets, • Escalate complex issues to engineering teams, • Communicate updates to internal teams and customers, • 1–2 years telecom/network experience, • Knowledge of fiber networks, IP routing, Layer 2/3, and BGP a plus, • Strong problem-solving and communication skills, • Ability to work evening/weekend shifts