Engineering technician jobs in Newark, New JerseyCreate job alerts

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact The Solar Battery Energy Storage System (BESS) Technician in the PEARCE Renewables Operations and Maintenance (OM) division performs tasks involving operations and maintenance (O&M) and physical labor at commercial and industrial solar energy projects located throughout United States. These are local sites-candidates should reside within 50 miles of the New York, New York areas. Core Responsibilities • Troubleshoot and perform preventive maintenance on Battery Energy Storage System (BESS) equipment., • Perform Lock Out Tag Out (LOTO) of equipment as an authorized person and under properly performed LOTO conditions., • Conduct daily safety and task planning discussions including pre-task planning, Job Hazard Assessments (JHAs), and Risk Assessments (RAs)., • Interact with vendors and customers in a professional manner., • Act as a team member to support site work which could include supervising field work onsite focusing on safety, quality, and efficiency. Specific duties may vary or evolve over time based on business and client needs. Core Experience • 3- 4+ years of electrical proficiency relating to electrical systems and components is required., • 3- 4+ years of Renewable energy experience is preferred., • A commitment to safety and attention to detail with the ability to recognize potential issues and provide safe solutions., • Post-secondary education is preferred., • Electrical certifications are preferred such as OSHA 10, OSHA 30, and NFPA70E., • Excellent written and verbal skills to meet Environmental Health and Safety (EHS) internal and external requirements is required. Physical/Work Environment: At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Candidates residing in the New York, New York area preferred., • Candidates must have a valid driver's license for at least a year., • Work possible rotating shifts., • Prolong standing and working in ergonomic challenging positions., • Varied climates based upon locations. Compensation: $35.00-$60.00 hourly/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $35—$60 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description Power-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Technician. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? • Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand)., • Experience with ACAD, or similar CAD software., • Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc., • Niagara N4 certification., • Ability to read and interpret blueprints, specifications, and program /design to meet sequence of operations of both design/build projects as well as plan/spec projects. Additional Necessary Qualifications • 3 years of building automation experience required., • Strong understanding of commercial HVAC systems operations., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook)., • Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools., • Mechanical aptitude required., • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams., • Valid and clean NYS Driver's License to operate company vehicles., • OSHA 30 and site safety training. Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 – $100,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Summary: The Field Service Technician – MMIC/VERDA Water Quality System is responsible for delivering field services to the MMIC mobile fleet and VERDA Water Quality Systems to our customers. The primary focus is to service the MMIC Mobile Fleet, by executing commissioning services, decommissioning services, and other maintenance requirements along with the organization of service and repairs. On the VERDA Water Quality System side, provide preventive maintenance services, Water Quality System Disinfection and Water Quality Testing and Sampling. Qualifications: Strong organizational, communication and interpersonal skills to interface with internal and external customers and subcontractors. The employee will possess previous experience with water quality testing and services, customer service and have technical ability. The employee must be able to work independently and be self-motivated. • Associates degree, military training or equivalent work experience., • Minimum of 3 years of related technical experience is desirable., • Proficiency in the use and application of Microsoft Office (Word, Excel, Outlook, PowerPoint) and Adobe Acrobat is required., • Ability to understand the technical aspects of VERDA Water Quality Systems and the MMIC Mobile trailer fleet., • Ability to read and interpret engineering drawings that specify the equipment specifications and instructions for use., • Ability to follow the procedures necessary to safely and properly perform services., • Ability to accurately articulate messaging to the customer verbally, or via email., • Highly organized, task oriented, self-motivated and energetic., • Must be able to lift 75lbs, • Must exhibit ethical work behavior., • Must be able to travel to customer sites throughout the United States., • Must be able to be credentialed when entering customer sites., • Must be able to crawl, sit, stand, work in confined spaces and on ladders., • Must have a valid driver’s license Duties & Responsibilities • Execute service activities for MMIC/VERDA Water Quality Systems., • Obtain a complete understanding of RO/DI Water Quality Systems, • Understand ST108 guidelines and TIR34 recommendations for water quality., • Maintain and manage tool inventories used for water quality testing services and mobile fleet services., • Provide water testing services including Preventive Maintenance services, System Disinfections, and Water Testing and Sampling services as required., • Complete and submit all documentation requirements in a complete, timely and accurate manner. Such as Field Service Reports, Expense reports, PM and Services checklists, and Timesheets., • Coordinate mobile fleet service and water quality testing and maintenance services with the customer., • Perform all other duties as assigned by the Manager., • Provide technical support to end users and service providers., • Travel to customer sites which could exceed 50% travel., • Follow all procedures for service call execution., • Manage and work with sub contractors, engineers, and facilities maintenance personnel., • Work with engineering, production, sales with technical requirements and requests.

Field Service Technician — Livingston, NJ (Hybrid) We are excited to announce that Nanion Inc. USA is hiring! We’re looking to hire a Field Service Technician (FST) to support the growing demand for Nanion products and to provide premium customer service. About the role This is a lab-based technical role. You'll spend most of your time in our Livingston facility repairing and refurbishing instruments, supporting our field service engineers remotely while they're on-site with customers, and managing spare parts to keep our instruments running. Occasional travel, typically for preventive maintenance visits, rounds out the job, but this is not a road warrior position. If you like solving problems at the bench, owning your work, and being the person the field team calls when they're stuck, this is a good fit. What you'll do • Diagnose, repair, and refurbish instruments, modules, and electronic circuit boards in our Livingston lab, • Provide remote technical support by phone, email, and video to customers and to our field service engineers, • Manage spare parts: track inventory, process return merchandise authorizations (RMAs), prepare and ship parts and loaner units, • Perform preventive maintenance and occasional on-site service at customer sites (roughly 15–25% travel, mostly domestic), • Document all service work accurately in service reports, logs, and our ticketing system, • Support instrument setup, testing, and validation in our demo lab, • Help maintain service documentation and troubleshooting guides What we're looking for • An associate’s or bachelor’s degree in electronics, electrical engineering, biomedical engineering, or equivalent hands-on experience, • At least one year of experience servicing electronic, electromechanical, or scientific instrumentation, • Comfortable with schematics, multimeters, oscilloscopes, and board-level troubleshooting, • Strong written and verbal communication skills in English — you'll be documenting your work and walking engineers through fixes remotely, • Organized and detail-oriented, particularly around parts tracking and service records, • Able to work independently and as part of a small, collaborative, multicultural team, • Valid driver's license and passport, with the ability to travel occasionally, • Must be authorized to work in the US Nice to have • Experience with laboratory or analytical instrumentation (electrophysiology, microscopy, liquid handling, robotics), • Familiarity with fluidics, pneumatics, or precision motion systems, • Experience with a customer relationship management (CRM) system or field service ticketing platform To apply Send your CV and a brief cover note to leo.morada@naniontech.com.

FACILITIES TECHNICIAN (EVENING SHIFT, 2:00 P.M. TO 10:00 P.M.) Company: Pegasus Development Location: Midtown Manhattan, New York, NY (on site, five days per week) Employment type: Full time, hourly (non-exempt) Standard: Detail-first and exacting; the building notices everything Shift: 2:00 p.m. to 10:00 p.m., Monday through Friday; a standing schedule, not a rotation Reports to: Director of Facilities Pay range: $40.87 to $46.88 per hour ($85,000 to $97,500 annualized at 2,080 hours) Target start: On or before October 16, 2026 ABOUT THE ROLE Pegasus Development is hiring a Facilities Technician for a standing 2:00 p.m. to 10:00 p.m. evening shift at a private investment holding company in the Plaza District. This is the second half of the craft day, equal in standing to the Day Technician and reporting directly to the Director of Facilities, built for the work that should never happen in front of people. You carry the response standard through 10:00 p.m., stand present for evening events on the space-condition side, and direct the programs that run while the floors are empty: floor and finish care cycles and the pest control program's discreet scheduling. You brief the evening cleaning crew on arrival every night and hand the building's final touch-up state to the overnight. THE STANDARD The standard here is set by the people who own the floors, and their reference points are the best hotels and private residences in the world. Nothing is judged against good enough for an office. A defect is anything a principal would notice the next morning, reported or not: an event space returned to presentable rather than exactly as found, a finish care cycle that stopped short of the room's edge, a glass mark left on a table after the guests are gone. This seat exists to leave nothing for the 6:30 a.m. walk to find, and to prove it on the platform before close. WHAT YOU WILL DO • Take the 2:00 to 3:00 p.m. handoff from the Day Technician: open items, the day's incident log, the evening's commitments, • Carry the response standard through the back half of the business day without a gap, • Stage floor and finish care as spaces clear; verify the carpet program executed under the building's janitorial contract, • Schedule pest control in the discreet windows, • Stand by on event nights on the space-condition side; otherwise run the off-hours program work, • Brief the evening cleaning crew on arrival every night, • Make the final pass at 10:00 p.m.; log and close the evening's state on the platform, • Cycle weekend and holiday coverage with the Day Technician against confirmed need, confirmed by the Director WHAT YOU BRING • An exacting, uncompromising attention to detail: event spaces reset to the standard without exception, finish care completed to the edge of the room, the evening's state logged completely before close, • Five or more years in skilled facilities craft: finish repair, paint touch-up and color matching, hardware, and lamping, in environments where the finish level is the product, • Hotel engineering backgrounds fit this seat's rhythm naturally, • Comfort working independently and the judgment to run a quiet building alone, • The presence to stand behind a live event without being seen in it, • Comfort with work order platforms and photo documentation, • An afternoon-to-close schedule as the job, not a rotation THIS SEAT IS NOT FOR YOU IF • You need to be seen working. This seat succeeds when no one knows the work happened., • You reset an event space to presentable. The standard is exactly as found, or better., • You end the shift with open items unlogged. HOW SUCCESS IS MEASURED • The event-night response standard held whenever a body is required, • Finish care and pest programs current against schedule rather than complaint, • The evening crew's briefing delivered every night on shift, • Zero findings on the 6:30 a.m. walk from the evening's work, • Zero repeat defects: a defect fixed once is fixed HOW WE HIRE FOR THIS The interview includes a floor walk. You will be asked what you see, and the answer decides whether the conversation continues. Finalists complete a short practical exercise: one defect log entry with the photograph, and a reset of a space we disturb, checked against how we left it. COMPENSATION AND BENEFITS Hourly pay $40.87 to $46.88, which annualizes to $85,000 to $97,500 at 2,080 hours; a good-faith range at the time of posting, and the offer depends on experience. Overtime at time and a half beyond 40 hours in a week, per New York law. Comprehensive benefits. Employer of record is Pegasus Development LLC. ABOUT PEGASUS DEVELOPMENT Pegasus Development is an owner's representative and development advisory firm with offices in Las Vegas, New York, and Sacramento, safeguarding more than $7.5 billion in client projects across hospitality, entertainment, sports, gaming, and commercial real estate. The firm works as an extension of its clients' leadership, with no financial interest in the vendors, materials, or contracts it oversees. pegasusdev.com CONFIDENTIALITY AND HOW TO APPLY This position supports a private investment holding company in the Plaza District. Candidates learn the client's identity at interview; discretion is a condition of the process and of the seat. Apply through this posting, or send a resume to contact@pegasusdev.com with "Facilities Technician, Evening" in the subject line. Pegasus Development LLC is an equal opportunity employer.

On-site (In-Person) | Internship About the Role Emulatics is looking for a hands-on, detail-oriented 3D Printing Technician Intern to join our team on-site. If you are passionate about additive manufacturing or rapid prototyping this is your chance to gain practical industry experience. You’ll be directly managing machines, handling physical parts, and processing client orders starting your very first week. If you thrive in fast-paced environments, you’ll master the ins and outs of a high-throughput additive manufacturing facility in no time. Working side-by-side with our engineering team, you will help maintain, operate, and optimize our 3D printing setup while turning physical concepts into finished products for real clients. Key Responsibilities • Prepare and monitor 3D print jobs across on-site machine fleets., • Perform post-processing duties including support removal, sanding, curing, and surface finishing., • Pack and ship finished parts safely for client delivery., • Assist with some machine maintenance: clogs, nozzle changes, bed cleaning, • Shadow experienced technicians to diagnose and troubleshoot printing equipment., • Inspect finished parts for quality, dimensional accuracy, structural integrity, and failures. Qualifications & Skills • Currently pursuing or recently completed a degree in Mechanical Engineering, Industrial Design, Mechatronics, or a related field., • Hands-on experience operating FDM or SLA 3D printers (personal, academic, or lab setup)., • Familiarity with slicing software is a plus., • An interest in content creation or social media is a plus., • Strong attention to detail and ability to manage multiple tasks in a fast-paced environment. What You'll Gain • Direct, practical experience in additive manufacturing and hardware prototyping., • Mentorship from experienced engineers in an active, hands-on environment., • Flexible hours designed to accommodate course schedules., • Potential for conversion into a paid part-time position based on performance. If interested, please send us your resume to jobs@emulatics.com

Join an established global leader in RF, microwave, and advanced measurement technology, with decades of industry expertise supporting some of the world's most demanding technology markets. The organization serves leading companies across aerospace and defense, semiconductor, wireless communications, satellite, and advanced research, providing highly specialized solutions that enable innovation in critical applications. This is an opportunity to join a technically respected organization with a strong reputation, sophisticated RF and microwave products, and a strong commitment to quality, technical excellence, and employee development. As an RF Test Technician, you'll play a key role in testing, troubleshooting, calibrating, repairing, and adjusting sophisticated RF instruments, sub-assemblies, RF assemblies, and complete hardware systems. You'll work hands-on with advanced RF test equipment, electronic hardware, precision measurement tools, and technical documentation while supporting products operating from DC through 40 GHz. This is an excellent opportunity for a technically strong individual who enjoys troubleshooting complex equipment, working closely with engineering and manufacturing teams, and growing within a high-output technical organization. Why This Role? • Competitive Compensation: Competitive hourly pay based on experience and qualifications, with opportunities for overtime., • Flexible Schedule: Full-time, Monday through Friday, with flexibility around start and end times., • Relocation & Sign-On Support: Relocation assistance and a sign-on bonus may be available for qualified candidates., • Leadership Growth Opportunity: Grow beyond the technical role, take on increased responsibility, and develop into a leadership or supervisory position., • Stable & Established Company: Join an established technology organization with decades of RF and microwave industry expertise and a strong reputation for technical excellence., • Advanced Technology: Work hands-on with sophisticated RF, microwave, signal generation, power measurement, analysis, calibration, and satellite link emulation technologies., • Hands-On Technical Work: Perform testing, troubleshooting, calibration, repair, adjustment, assembly, and precision measurement on sophisticated electronic and RF hardware., • Advanced Test Equipment: Gain hands-on experience with spectrum analyzers, vector network analyzers, signal generators, current probes, voltmeters, RF power measurement equipment, and precision inspection equipment., • Technical Growth: Build deeper expertise in RF and microwave testing, calibration, troubleshooting, and electronic repair while working with experienced engineering and manufacturing professionals., • Small, High-Output Team: Work as part of a focused team of approximately five technicians supported by a supervisor, where individual contributions directly impact production and product quality., • Engineering Exposure: Work closely with engineering and manufacturing personnel to troubleshoot technical issues, clarify requirements, and resolve production and test problems., • Technical Excellence: Work in an environment where precision, accuracy, documentation, quality, and disciplined troubleshooting are critical to product performance., • Growth-Oriented Culture: Join an organization that values employees who are engaged, motivated, willing to learn, and interested in building a long-term career. What You'll Do: • Perform RF testing, calibration, troubleshooting, and repair of instruments, RF assemblies, sub-assemblies, and complete hardware systems across frequencies from DC to 40 GHz., • Operate sophisticated RF test equipment, including spectrum analyzers, signal generators, vector network analyzers, current probes, voltmeters, and RF power measurement equipment., • Read and interpret electrical schematics, mechanical diagrams, engineering instructions, and manufacturing documentation while applying fundamental DC and RF principles., • Analyze test data, troubleshoot equipment and assemblies, perform component-level repairs and adjustments, and maintain accurate test, calibration, and system records., • Work closely with engineering and manufacturing teams in a small, high-output environment, with the opportunity to take on increased responsibility and grow into a future leadership or supervisory role. What You'll Bring: • High school diploma or equivalent with 5+ years of formal electronic and mechanical assembly experience., • Strong hands-on experience with RF testing, electronic testing, troubleshooting, calibration, and assembly, including experience with RF test and measurement equipment., • Ability to read and interpret electrical schematics and mechanical diagrams, troubleshoot electrical and mechanical issues, and work with hand tools and soldering equipment., • Strong understanding of DC and RF concepts, including voltage, current, power, frequency, insertion loss, return loss, linearity, phase noise, noise figure, and spectral analysis., • Strong attention to detail, analytical and problem-solving skills, communication abilities, computer proficiency, and the ability to manage multiple assignments while meeting production deadlines.

We are seeking an experienced 1st Shift Automation & Controls Technician to support and maintain automated manufacturing and facility systems in a fast-paced industrial environment. The ideal candidate will have strong PLC, SCADA, electrical troubleshooting, and preventive maintenance experience, along with a commitment to safety and operational excellence. Key Responsibilities • Program, troubleshoot, and maintain PLC and SCADA systems., • Diagnose and repair electrical, automation, and industrial equipment issues., • Read and interpret electrical schematics, blueprints, and technical documentation., • Perform preventive maintennce, inspections, and equipment testing., • Support control system design, documentation, and continuous improvement initiatives., • Ensure compliance with electrical safety, lockout/tagout (LOTO), and arc flash procedures., • Collaborate with maintenance and operations teams to maximize equipment reliability. Qualifications • 3+ years of experience with industrial automation, PLC programming, and troubleshooting., • Experience with Allen-Bradley, Siemens, or similar PLC platforms., • Strong understanding of electrical systems, controls, and industrial equipment., • Knowledge of NEC, OSHA, NFPA 70E, and electrical safety standards., • Ability to work independently and as part of a team., • Comfortable performing physically demanding tasks, including climbing, lifting, and working in confined spaces., • Available for paid overtime Preferred Qualifications • Associate degree or technical certification in Electrical Technology, Engineering, or related, • Experience with SCADA systems and HMI development., • Electrical maintenance certifications., • Experience with pneumatic, hydraulic, or welding systems., • Bilingual English/Spanish is a plus. Apply today to join a growing organization focused on safety, reliability, and continuous improvement.

Schneider Electric has an outstanding opportunity for a passionate individual to assume the role of a building security technician at our Lyndhurst, NJ location, with regular assignments at New York job sites, including Brooklyn and Manhattan. What will you do? • Diagnose, install, troubleshoot, maintain, and integrate digital and analog systems, including Access Control, CCTV, Network, Visitor Management, and Security systems, • Provide on-site technical support and training to customers and end-users., • Perform scheduled preventative maintenance and ensure proper commissioning/documentation and startup of Systems., • Install, replace, and recommission Systems devices, while maintaining test records and creating necessary documentation., • Provide on-site training, emergency, warranty, and after-hours services, and adhere to safety requirements, • Assist in field startup, material logistics, and demonstrate proficiency in relevant engineering tools. What qualifications will make you successful for this role? • Strong understanding of analog/digital signals, relay logic, structured cabling, building infrastructure, software/testing tools., • Excellent troubleshooting and diagnostic skills with a customer-centric approach., • Ability to work independently and as part of a team to deliver exceptional service., • Strong communication and interpersonal skills., • Strong understanding of MS Office applications., • 2+ years of security technician experience with installation, service, or both, • Must have analog and digital CCTV installation and/or service experience, • Must have experience with Access Control systems - installation, confirguration, maintenance, troubleshooting,, • OSHA 30 and SST are highly preferred, • Strong preference for certification in one or more of the following areas: Genetec, Lenel, AMAG, or Commend What's in it for me? • Direct customer impact through meaningful technical work in the field, • Mentorship and structured support to build your technical skills and confidence, • Career growth opportunities within a global leader in energy management and automation, • Exposure to diverse industries and innovative technologies For this U.S. based position, the expected compensation range is $66,000 - $99,000 per year, which includes base pay and short-term incentive. The compensation range for this full-time position applies to candidates located within the United States. Our salary ranges are determined by reviewing roles of similar responsibility and level. Within the salary range, individual pay is determined by several factors including performance, knowledge, job-related skills, experience, and relevant education or training. Schneider Electric also offers a comprehensive benefits package to support our employees, inclusive of medical (with member reward points), dental, vision, and basic life insurance, Benefit Bucks (credits to apply towards your benefits) flexible work arrangements, paid family leaves, 401(k) + match, well-being and recognition (including service anniversary) programs, 12 holidays per year, 15 days of paid time off per year (pro-rated in the first year of employment based on start date), opportunity to purchase company stock (eligibility depends on start date), and military leave benefits. This role does not support sponsorship and requires work authorization within the United States. You must submit an online application to be considered for any position with us. This position will be posted until filled. Let us learn about you! Apply today. At Schneider, we believe that every employee is a talent who deserves equal opportunities. This means you matter. Every individual needs to feel valued, supported, and treated fairly to do their best work. Our Total Rewards is our way of saying: “We see you. We value you”. It’s more than just pay and benefits- it’s a meaningful investment in you. It is designed for you to perform, grow, feel safe, and elevate your potential to shine as an impact maker. For this U.S. based position, the expected pay range is USD 68,000 - USD 102,000 per year. This pay range includes base pay and short-term incentives. The compensation range for this full-time position applies to candidates located within the United States. Our pay ranges are determined by reviewing roles of similar responsibility and level. Within the pay range, individual pay is determined by several factors including performance, knowledge, job-related skills, experience, and relevant education or training. Schneider Electric is there when it matters most to you Our Total Rewards package outlines all the benefits and support you’ll enjoy as part of the Schneider Electric team: Care for Yourself and Your Family. We ensure you feel secure with benefits that help you and your family thrive: medical (with member reward points), dental, vision, and basic life insurance, Benefit Bucks, flexible work arrangements, paid family leaves, well-being programs, 12 holidays per year, and 15 days of paid time off per year. Invest and Plan Your Future. We help you plan and invest for the future with competitive pay and programs including base salary, incentives, company share ownership, and 401(k) with match. Grow Your Skills and Career. We support development through performance discussions, global opportunities, the Schneider Career Hub, and learning platforms like Coursera. Team Up in the Workplace. We encourage collaboration, recognition, sharing your voice, and an inclusive workplace. You must submit an online application to be considered for any position with us. This position will be posted until filled. Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best. We mirror the diversity of the communities in which we operate, and ‘inclusion’ is one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do. At Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders. You can find out more about our Trust Charter _ Schneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

Ballard's Customer Care team is recruiting for Field Service Technicians to support customers across the Northeastern United States. The Field Service Technician is responsible for the repair, refurbishment, testing, and maintenance of fuel cell modules and components for Ballard's customers. This role combines hands-on technical work, troubleshooting, inventory support, customer training, and service documentation to ensure products are repaired, restored, and maintained to the highest quality and safety standards. Key Responsibilities: Repair and Refurbishment • Perform repair, retrofit, refurbishment, and reconditioning activities for fuel cell modules and components across all products in the field., • Execute mechanical and electrical repairs in accordance with established procedures, technical specifications, and quality standards., • Conduct functional testing, leak testing, and verification activities to ensure equipment performance and reliability., • Support continuous improvement initiatives related to repair and refurbishment processes. Troubleshooting and Technical Support • Diagnose and troubleshoot mechanical, electrical, and system-level issues on fuel cell modules and related components., • Support testing activities and assist in identifying root causes of product failures., • Collaborate with advanced support teams, engineering, quality, and operations teams to resolve technical issues and implement corrective actions. Field Service Support • Travel frequently to customer and operational sites, to perform maintenance, repairs, retrofits, commissioning support, and troubleshooting activities, including trips that may require short-notice scheduling and overnight stays., • Provide timely and professional technical support in the field while ensuring compliance with safety and operational procedures., • Represent the company professionally when interacting with customers and external stakeholders. Customer Training • Train customers and service partners on module repair procedures, leak testing methods, and maintenance best practices., • Deliver hands-on instruction and technical guidance to support safe and effective equipment operation and servicing. Documentation and Record Keeping • Maintain accurate and complete work logs, repair records, inspection reports, and service documentation to support quality, traceability, and customer service requirements., • Ensure all repair and testing activities are documented in accordance with company and quality management requirements., • Provide detailed feedback on product performance, recurring issues, and service trends. Qualifications: Education & Experience • Technical diploma, trade certification, or equivalent education in Mechanical Engineering Technology, Electrical Engineering Technology, Mechatronics, Industrial Instrumentation, Automotive Technology, or a related field., • 2+ years of experience in field service, equipment maintenance, repair, manufacturing, or another hands-on technical service environment., • Experience with fuel cells, hydrogen systems, industrial equipment, power systems, or electro-mechanical products is considered an asset. Knowledge, Skills & Abilities • Strong mechanical and electrical troubleshooting skills., • Ability to read and interpret technical drawings, schematics, wiring diagrams, and service documentation., • Experience using diagnostic tools, test equipment, and hand tools., • Strong attention to detail and commitment to quality workmanship., • Effective verbal and written communication skills., • Ability to work independently and collaboratively within a team environment., • Proficiency with Microsoft Office applications and service documentation systems., • Strong organizational and time-management skills. Additional Requirements • Valid driver's license and ability to travel frequently for customer support and service activities, including domestic and international travel as business needs require., • Ability to lift, move, and handle materials, tools, and equipment in accordance with workplace safety guidelines., • Ability to work safely in industrial, manufacturing, and customer-site environments., • Ability to work flexible hours, including occasional evenings, weekends, and extended shifts, to support customer service requirements and travel schedules. The salary range for this position is between $60,000 – 90,000 USD. Candidate's experience, education, and relevant skills will be taken into consideration when placing within the range. Ballard considers many factors in determining total compensation, including the successful Candidate’s job-related knowledge, skills, experience, position location, and internal equity. As part of our total rewards offering, permanent employees in this position may be eligible for our competitive annual short-term and long-term bonus program, subject to program eligibility requirements. As a Ballard employee, we want you to feel valued and appreciated for your efforts. That’s why we offer a competitive benefits package in addition to a performance-driven compensation philosophy. From bonuses to benefits, our people work hard, and we believe they should be rewarded for it. We care about career growth and development. We believe in work-life balance with tons of flexibility and rewarding benefits. Extended health and dental benefits and employee assistance program Paid time off Retirement plan matching Extensive learning opportunities, catalogue of development course offerings People networks and mentorship programs (to name a few) Note: The incentive programs, benefits, and perks have specific eligibility requirements. The Company reserves the right to alter these incentive programs, benefits, and perks in whole or in part at any time without advance notice. Our Values Listen & Deliver | Quality. Always. | Inspire Excellence | Row Together | Own It • Ballard values diversity in the workplace and is committed to Employment Equity. We encourage applications from all qualified candidates.

About the Role International Delights is building a world-class, multi-asset maintenance program across our production, facilities, and fleet operations. We are looking for a Maintenance Manager to own the site’s maintenance performance end-to-end — leading Team Leaders and technicians, and driving the transition from a reactive to a proactive, planned and predictive maintenance culture. This role is the accountable owner of the site’s core maintenance KPIs — safety, downtime, MTTR, MTBF, PM compliance, and cost — and reports directly to the Director of Maintenance and Engineering as a key partner in executing the 24-month reliability roadmap. It is a visible, high-impact position with a clear development path toward Director-level responsibility. What You’ll Do Performance & Reliability • Own the site’s maintenance KPI scorecard — safety incidents, unplanned downtime, MTTR, MTBF, PM compliance, backlog, and maintenance cost — setting targets, driving corrective action when metrics miss, and reporting performance to plant and maintenance leadership on a regular cadence, • Own day-to-day maintenance of all bakery production lines — mixing, makeup, proofing, ovens, cooling, lamination, and packaging — so scheduled production is delivered at target throughput, yield, and food-safety standards, • Analyze downtime, failure, and CMMS data to identify systemic reliability issues and sponsor root cause and corrective action initiatives, • Partner with the Maintenance Planner and reliability resources to mature the site across the four-tier model: reactive, preventive, predictive, and RCM Leadership & Development • Lead, develop, and hold accountable 4 Team Leaders and the technician workforce across shifts A–D, setting priorities and resolving cross-shift conflicts, • Develop the technician bench with the Maintenance Trainer — own the skills matrix, training plan, and succession planning across the maintenance organization, • Translate the site’s 24-month maintenance roadmap into department-level goals, staffing plans, and daily execution Safety & Food Safety • Own safety performance within maintenance — LOTO, machine guarding, confined space, arc flash, and hot work — and lead incident investigations through to closure, • Ensure all work meets GMP, HACCP, allergen-changeover, and SQF requirements; own food-safe repair practices including food-grade lubricants, no-loose-hardware discipline, and post-repair sanitation sign-off, • Own the performance, upkeep, and regulatory compliance of refrigeration systems and facility/building infrastructure, including ammonia and refrigerant regulations [and PSM/RMP program elements] and applicable building codes Planning & Execution • Review and commit to the weekly maintenance schedule developed by the Maintenance Planner, who reports to the Director of Maintenance and Engineering — validate priorities, assign crew capacity, and protect PM windows around the bake schedule, • Partner with Production on changeovers, sanitation windows, and holiday bake ramps, • Drive CMMS adoption and data integrity across the department to support KPI reporting and planning decisions Cost & Asset Stewardship • Manage the maintenance department budget — labor, contractor spend, and parts/MRO inventory — and provide input on capital projects, • Own contractor and vendor relationships supporting maintenance execution, including scope, performance, and cost management, • Own maintenance, inspection, and compliance for site fleet assets — powered industrial trucks, yard equipment, and [delivery vehicles] — including operator inspection programs, OSHA PIT and applicable DOT requirements, service contracts, and replace-versus-repair decisions. What You Bring Required • 10+ years of industrial maintenance experience, including 5+ years in a maintenance management role, • Proven track record owning and improving maintenance KPIs — safety, downtime, MTTR, MTBF, PM compliance — in a manufacturing environment, • Strong working knowledge of mechanical, electrical, pneumatic, hydraulic, and PLC/controls systems, • Deep experience with CMMS platforms, including KPI dashboards, PM program build-out, and data-driven decision-making, • Demonstrated ability to build and lead multi-level teams across shifts, • Strong financial acumen — budget ownership, labor planning, and cost control, • Excellent communication and influencing skills, comfortable presenting KPI performance to plant leadership Preferred • Food or beverage manufacturing experience, • Ammonia refrigeration experience, including participation in or ownership of a PSM program, • SQF, BRC, or equivalent GFSI audit experience, • Fleet or powered industrial truck maintenance experience, including OSHA PIT and DOT compliance programs, • Reliability credentials or framework experience (CMRP, SMRP, Uptime Elements), • Bachelor’s degree in Engineering or a related technical field; equivalent experience will be considered Schedule & Work Environment • Primary schedule is [day shift, Monday–Friday], supporting a continuous operation running shifts A–D, • On-call rotation and occasional weekend, holiday, or off-shift coverage required during peak bake ramps, planned shutdowns, and major breakdowns, • Plant floor environment with temperature variation near ovens and coolers, elevated noise, and lifting up to [XX] lbs; PPE and GMP requirements apply at all times What Success Looks Like • Measurable, sustained improvement in downtime, MTTR, and MTBF against 24-month targets, • Strong safety performance and full compliance across the maintenance department, • High PM compliance and a shrinking, well-managed maintenance backlog, • A capable, accountable leadership bench across Team Leaders and senior technicians, • A demonstrated shift from reactive maintenance toward a planned, predictive, and cost-disciplined program International Delights is an equal opportunity employer.

Project Operations Manager – Low-Voltage & Door Security Integration Company: Cosmic Fischer (CFLocks.com) Location: Midtown Manhattan and Bronx warehouse, on-site. Approximately 70% Midtown / 30% Bronx (excluding travel within the NYC 5 boroughs for on-site project work). Reports to: Chief Executive Officer Type: Full-time Compensation: $100,000 to $120,000, commensurate with experience, plus performance bonus Local Travel: Occasional, to project sites in the 5 boroughs About Cosmic Fischer Cosmic Fischer (CFLocks.com) is a New York City commercial door security integrator with roots dating back to 1968. We specialize in mechanical and electronic door hardware, access control, and low-voltage security systems for commercial buildings throughout New York City. As the company grows, we are investing in our operational foundation, and this role is the first hire in that effort. The Opportunity We are hiring a Project Operations Manager to serve as the critical link between technical sales and the field. This person takes a sold project and turns it into an engineered, scheduled, fully kitted installation ready for execution by our technicians. The roles owns the sale through installation process, end-to-end: sourcing and specifying the right products, understanding the engineering approach of each project, building the installation schedule, preparing systems and materials, and acting as the primary point of contact for the field team. It also carries the responsibility of keeping leadership informed on operational performance, risks, and issues. This is a hands-on, high-trust position reporting directly to the CEO. The role is ideal for a professional seeking to build a genuine operational function within a growing company – someone who will not merely execute tasks, but assume ownership of a core segment of the business. Responsibilities • Serve as the primary liaison between technical sales and installation, client success, translating sold projects into executable, engineered work orders, • Manage materials procurement, including the specification, sourcing, and ordering of door hardware, access control components, and low-voltage materials for each project, • Prepare and stage systems and hardware for technicians in advance of installation, • Develop and manage installation schedules, coordinating technician availability against project timelines, • Maintain regular communication with field technicians, including assigning work, addressing technical questions, and resolving issues encountered on-site, • Coordinate NYC building requirements that affect execution, including certificates of insurance, building and freight elevator access, and after-hours work approvals, • Maintain visibility into project status across the pipeline and proactively flag risks or delays before they affect clients, • Travel locally (NYC 5 boroughs) on an occasional basis to job sites to assess scope, verify site conditions, and/or support technicians directly, • Support the ongoing development and refinement of internal processes related to scheduling, procurement, and project handoff as the company scales How Success Is Measured This role is measured on outcomes, not activity. In the first year, success looks like: • On-time installation completion against committed dates, • Material accuracy: the right parts on-site the first time, • Reduced return trips and rework, • Shorter cycle time from sale to installation Qualifications • 5+ years of field or operations experience in low-voltage systems, door hardware, or security integration, with a demonstrated understanding of how systems get installed in practice, not just how they are specified on paper, • Comfortable managing 8 to 15 concurrent projects, with the schedules, vendors, and field coordination that come with them, • Working knowledge of access control systems, electronic and mechanical door hardware, and related low-voltage systems (readers, maglocks, power supplies, foundational wiring principles, etc.), • Experience executing commercial installations in NYC buildings, including certificates of insurance, building access and freight elevator coordination, and after-hours work requirements, • Strong product and vendor knowledge, with the ability to source materials, evaluate components, and avoid costly procurement errors, • Experience working in a field service management or project scheduling platform, and comfort helping implement and improve systems as the company modernizes, • Excellent communication skills, particularly with field technicians. Proficiency in Spanish is preferred, not required., • Exceptional organizational skills, with the ability to manage multiple active projects, schedules, and vendor relationships concurrently, • A proactive, self-directed professional who takes ownership of responsibilities without requiring close supervision, • A valid driver's license is required for occasional local site travel Compensation and Benefits • Base salary of $100,000 to $120,000, commensurate with experience, • Performance bonus of up to 15% of base, tied to the success measures above, • Medical, dental, and vision coverage, • (10) days paid time off plus paid holidays, • 401(k), • Company phone and vehicle allowance or company vehicle for site travel

Are you a skilled technician with a passion for machinery and problem-solving? Do you thrive in fast-paced environments that require travel and hands-on work with cutting-edge equipment? If so, this is your chance to advance your career as a Field Service Engineer II with a leading company specializing in CNC fabrication machinery. Be part of a team that values technical expertise, customer satisfaction, and continuous learning! Overview As a Field Service Engineer II, you will play a crucial role in installing, troubleshooting, maintaining, and training customers on sophisticated CNC fabrication equipment, including punch presses, fiber lasers, mills, lathes, and turning centers. Your mechanical expertise will help ensure the smooth operation of long-standing machines at client sites across the country. This position offers an exciting mix of technical challenge, travel opportunities and the satisfaction of solving real-world manufacturing issues. If you’re ready to contribute your skills in a dynamic environment and grow your professional portfolio, we want to hear from you! Required Skills • Strong mechanical aptitude with experience in hydraulics, pneumatics, and mechanical troubleshooting, • Proficiency with hand tools and machine tools, • Ability to adjust CNC controls (Fanuc controllers a plus) and perform basic parameter changes, • Knowledge of electrical/electronic systems, including troubleshooting and diagnostics, • Excellent problem-solving skills and a professional approach, • Ability to read and interpret technical manuals, schematics, and regulations, • Effective communication skills for training and customer support Nice to Have Skills • Experience with CNC programming or operation, • Familiarity with machine tool sales or upselling parts and upgrades, • Additional certifications in electronics, hydraulics, or mechanical systems, • Multilingual abilities, especially in languages relevant to international travel Preferred Education and Experience • Associate degree or equivalent in engineering, electronics, or a related field, • 4-8 years of experience in machine tool maintenance, installation, or servicing, or military technical training, • Prior experience with Fanuc CNC systems is a plus Other Requirements • Willingness and ability to travel domestically and internationally up to 85%, including potential trips to Canada and Mexico, • Valid driver’s license with a clean driving record and ability to drive personal vehicle as needed, • Ability to lift up to 50 pounds frequently and up to 75 pounds occasionally, • Ability to work in environments with loud noise, airborne particles, vibration, and varying temperatures, • Possession of or willingness to obtain a passport for potential international assignments Take the next step in your technical career—apply now and bring your expertise to a company that values innovation, dedication, and your growth!

Position Overview We are seeking a hands-on Maintenance Supervisor to lead our Maintenance Team in a high-volume coating, laminating, and converting manufacturing facility. This is a working supervisory position requiring strong electro-mechanical troubleshooting and repair skills. The Maintenance Supervisor will report directly to the Engineering Manager and supervise a team of Maintenance Technicians. Working alongside the team, the Maintenance Supervisor will provide daily direction, prioritize maintenance activities, respond to equipment breakdowns, and improve equipment reliability. The successful candidate will combine strong technical skills with the ability to lead, develop, and hold a maintenance team accountable. Key Responsibilities • Provide daily leadership and direction to Maintenance Technicians., • Prioritize maintenance activities based on production needs, equipment condition, safety, and available resources., • Work hands-on with technicians to troubleshoot and repair production equipment., • Troubleshoot electrical, mechanical, pneumatic, hydraulic, motor, drive, sensor, and control-system issues., • Support maintenance of coating, laminating, converting, web-handling, winding/unwinding, drying, and related process equipment., • Coordinate maintenance activities with Production, Engineering, and outside vendors., • Maintain accurate maintenance records and work orders using the company’s maintenance management system., • Ensure full compliance with OSHA and company safety policies, including proper Lockout/Tagout procedures, Pre-Job Briefs and Integrated Risk Assessments., • Train, coach, and develop Maintenance Technicians through hands-on instruction and cross-training. Required Qualifications • High school diploma or equivalent., • Two or more years of supervisory experience., • Five or more years of industrial maintenance experience in a manufacturing environment., • Strong electro-mechanical troubleshooting and repair experience., • Experience with industrial electrical systems, motors, drives, sensors, controls, pneumatics, and hydraulics., • Ability to read electrical schematics, mechanical drawings, and equipment manuals., • Experience implementing preventive maintenance programs., • Strong troubleshooting, problem-solving, and decision-making skills., • Ability and willingness to work hands-on with tools and equipment., • Strong communication and organizational skills., • Strong computer skills and experience using Microsoft Suite. Preferred Qualifications • Experience in coating, laminating, converting, printing, or other continuous-process manufacturing., • Experience with AC/DC drives and motor controls., • Experience in installing electrical power and control circuits., • Ability to reference and interpret National Electric Code, determine required fuse, breaker, conduit and wire size per code., • Knowledge of predictive maintenance and reliability practices., • Experience with CMMS maintenance systems., • Experience with Combustion Systems., • Technical training or certification in electrical, mechanical, or industrial maintenance. What We Are Looking For The ideal candidate is a working maintenance leader who enjoys being on the manufacturing floor and solving problems. You should be comfortable troubleshooting a machine, helping a technician make a repair, deciding what needs to be done next, and then looking for ways to prevent the problem from happening again. This position is ideal for an experienced Maintenance Lead, Lead Technician, or Maintenance Supervisor who wants to combine hands-on technical work with leadership and responsibility for improving the overall maintenance operation. Physical & Work Environment • Work in a manufacturing environment around operating machinery., • Ability to stand, walk, climb, bend, kneel, and work in various equipment locations., • Ability to safely use hand and power tools., • Ability to work from ladders and elevated platforms when required., • Ability to lift and handle maintenance-related components and materials., • Ability to work required shifts, overtime, weekends, or emergency call-ins as needed. We are looking for someone who can lead from the floor—someone who can troubleshoot the problem, help fix it, lead the team, and improve the process.

Job Description HANDS ON ELECTRICAL TECHNICIAN. CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES/ PLC PROGRAMMING IS A PLUS. MUST HAVE ELECTRICAL HANDS ON EXPERIENCE. MUST BE CAPABLE OF TROUBLESHOOTING AND WIRING MACHINES General Description: Develop and maintain facilities electrical infrastructure and equipment. Able to work safely and efficiently with high voltage equipment. Responsible for troubleshooting electrical problems throughout the plant. Supply power from Breaker Panel to equipment. Perform computer program modifications to existing PLC programs. Working knowledge of hydraulics helpful. Reports to: Maintenance Eng. Both English and Spanish speaking applicants will be considered. Responsibilities: • Maintain the electrical in the building and facility equipment., • Read and understand electrical schematics and blueprints, • Troubleshoot and wiring equipment, • Supervisor the Maintenance team Previous Experience: • Experience in A/C 120/208/470 Volts // EMT tube bend and rigid pipe, • Preferred Experience: Wiring electrical enclosures as per schematic given, • Preferred Experience: Computer programing of Allen Bradley PLC controllers Educational Qualifications: • Required: High School diploma, • Preferred: Electrical Technology or Engineering Degree, • Preferred: Electrical Certifications Company training will include • Company’s Quality Management System, • ISO 9001:2015 awareness Other Skills: • An ability to work well under pressure, • Teamwork and problem-solving skills, • Good verbal and written communication skills, • Efficiency and organization, • Able to speak Spanish helpful

Connections Personnel is hiring for a Direct Hire Technician A 2nd shift 3pm-1130pm for our client located in Springfield, NJ. Looking for candidates who have been mechanics for the military services or auto mechanics that have experience with mechanical components on vehicles or aircrafts to join the team. Responsibilities: A Technician performs the assembly, testing, and verification of advanced fluid-control components for Aerospace, Nuclear and other applications. This role is ideal for a hands-on technician who thrives in a precision manufacturing environment and enjoys working with complex electro-mechanical systems. Key Responsibilities • Perform assembly and performance testing of mechanical and/or electro-mechanical fluid-control devices in accordance with engineering procedures, blueprints, and schematics., • Operate, maintain, and help develop high-pressure test systems, including pneumatic, hydraulic, and calibration-fluid test stands and pumps., • Conduct electrical testing and verification using a variety of electronic diagnostic tools., • Work within controlled clean-room environments and conduct particulate analysis with accurate data collection., • Troubleshoot, repair, and validate hardware using systematic diagnostic methods., • Utilize oscilloscopes, and other diagnostic equipment to support testing and analysis., • Maintain a clean, safe, and organized work area., • Lift and move equipment or components up to 50 lbs as needed. Requirements: • Minimum 5 years of technical or mechanical maintenance experience., • Experience using various hand and measurement tools including but not limited to torque wrenches, height gauges, and calipers., • Ability to read and interpret blueprints, schematics, and technical procedures., • Proven experience assembling and testing electro-mechanical hardware., • Hands-on experience with high-pressure fluid, gas, and cryogenic testing., • Proficiency in electrical testing, including dielectric and insulation-resistance testing., • Strong computer literacy, including Microsoft Word and Excel., • Experience working in clean-room environments., • Manufacturing or machining experience is a plus., • Demonstrated ability to troubleshoot and repair hardware using diagnostic tools., • Drug test/background checks, and everify prior to starting., • Must be a US Citizen. Education • Minimum: High School Diploma, • Preferred: Vocational school graduate, Associate Degree or Certificate in Engineering Technology. Benefits: Health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. Company also has an employee assistance program. Their leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Schedule: 3pm-1130pm Monday thru Friday plus overtime Salary: $34/hr-$50/hr depending on experience. For immediate consideration please apply online at: _

Job DescriptionDescription: KSE is a mid-size construction management and engineering firm ranking in the ENR Top 100 for CM and ENR Top 500 for design services. With seven offices across four states (NY, NJ, PA and CT), the firm has been providing transportation and public infrastructure construction services for more than three and half decades. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position – Chief Inspector - NYSDOT Reports to: Project Manager Technical Responsibilities: • Handle daily field inspection reports and follow procedures for any noted inconsistencies., • Evaluate plans, specifications, and submittals for inspection conditions., • Review all work sites and suggest modifications as per requirements for improvement of procedures., • Interact and converse with project managers, contractors, and project staff as needed., • Attending pre-construction and project progress meeting, as necessary., • Maintaining accurate records of documentation., • Monitor and regularly check on the contractor’s work progress., • Review project information with clients and project staff to describe project details for interpretation of plans and specifications., • Comprehend required inspection codes and requirements to carry out testing., • Attending close-out meetings, as necessary., • Responsive to Client and other KSE Manager/ needs, and all other duties as assigned. Requirements: Educational Requirements and Experience: • 5–10 years of experience with either NICET IV or an equivalent., • Highway and Bridge experience, • Strong written and oral communication skills, including solid interpersonal skills., • Prior experience with NYSDOT, NYSTA. Physical Requirements: • This position requires physical ability to perform field inspections, • Ability to work in diverse weather conditions, • Extended periods of standing and walking possibly on uneven or challenging terrains, • Climbing, bending, kneeling, • Working long hours, • Lift and carry up to 25 lbs. Professional Licenses/Registrations: • Valid NICET IV Certification in transportation/highway construction., • (ACI) American Concrete Institute (ACI) and (NETCCP) North East Transportation Technician Certification Program (NETTCP) - Soils and Aggregate Inspector Certification preferred. Professional Development: • Willing to pursue professional development, training, and licensing. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE does not discriminate on the basis of race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description INJECTION MOLDING TECHNICIAN We are seeking an experienced Injection Molding Technician with a strong background in plastic injection molds, machining, mold repair, and modification. This is an excellent opportunity with an established company offering excellent benefits, long-term stability, and an opportunity for a career through retirement. Key Responsibilities & Qualifications ☐ Hands-on experience with plastic injection molding machines ☐ Experience repairing, adjusting, modifying, and designing injection molds ☐ Strong background in injection mold making and maintenance ☐ Ability to troubleshoot and repair plastic injection molds ☐ General machine shop experience, including milling and related machining equipment ☐ CNC machining experience strongly preferred ☐ Manual machining experience desired ☐ Ability to read and understand blueprints, engineering drawings, schematics, and specifications ☐ Strong mechanical troubleshooting and problem-solving skills ☐ Ability to work independently and maintain high-quality standards ☐ Tool & Diemaker welcomed Ideal Candidate The ideal candidate will have a strong general machining background, including milling and CNC machining, combined with hands-on experience working with plastic injection molds. We are particularly interested in candidates who have experience designing, repairing, modifying, maintaining, and troubleshooting injection molds and who can bring a strong machine-shop skill set to the position. Long-Term Opportunity This is an established company with excellent benefits and a strong commitment to its employees. We are looking for someone who wants more than just another job—someone interested in long-term employment and the opportunity to build a career with a company through retirement. If you have the injection molding, mold-making, repair, and machining expertise we are looking for, please submit your resume through this platform. We will review your qualifications and contact you regarding the opportunity. \nCompany Description · Stable company with long-term career opportunities · Competitive compensation · Overtime opportunities (when available) · Excellent work environment · Benefits package (where applicable) · Stable company with long-term career opportunities\r\n· Competitive compensation\r\n· Overtime opportunities (when available)\r\n· Excellent work environment\r\n· Benefits package (where applicable)

Job Description The Quality Assurance Technician is responsible for routine inspection and testing of raw materials and components as well as of final product for Cresilon’s products in the Animal and Human Health industries. This position requires a strong attention to detail as the individual will be responsible for identifying deviations in product quality or safety and ensuring compliance with local, state, and federal regulations, including current Good Manufacturing Practices (cGMP). Position is for 2nd shift. Responsibilities: • Sample and perform visual inspection of final products and raw materials. Perform other testing under the direction of QA Operations Manager., • Perform line clearance activities and in-process inspections., • Monitor routine manufacturing operations for conformance to applicable procedures (see Gowning Qualification requirements below), • Transfer materials between facilities (see lifting requirements below), • Facility 1 of 2: 122 18th Street, Brooklyn, NY 11215, • Facility 2 of 2: 87 35th Street, Suite 603/604/6R, Brooklyn, NY 11232, • Operate testing equipment such as force testers, torque testers, and balances., • Report all deviations in product, components, raw materials, and equipment per their relevant procedures, • Perform document control activities, including but not limited to printing logbooks and batch records., • Transcribe data into digital systems for tracking Quality Metrics., • Batch record review & support routine batch disposition Requirements Education: High School Diploma or Equivalent (2- or 4-year degree in Engineering, Science, or Technology/Biotechnology preferred) • Required experience in GMP and FDA regulated environments (ISO 13485:2016 preferred), • Ability to be Gowning Qualified per Cresilon’s SOP., • 1 year experience in regulated industry highly desirable, • Ability to lift, walk, stand, reach, pull and push Benefits · Paid Vacation, Sick, & Holidays · Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage · Company Paid Life and Short-Term Disability Coverage · Work/Life Employee Assistance Program · 401(k) & Roth Retirement Savings Plan with company match up to 5% · Monthly MetroCard Reimbursement The salary for this role is $25/Hour Cresilon is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job DescriptionJob Title: Industrial Mechanic (Class A or Class B) Type: Full Time Location: Brooklyn, NY Department: Manufacturing / Maintenance Reports to: Maintenance Manager Salary Range: $70,000 - $90,000 annually Shift Schedule: Third Shift (11:00pm -7:00am), will be required to work on alternate shifts when applicable. Number of Openings: 1 Job Summary: A leading commercial bakery in Brooklyn, NY is seeking a Class A Industrial Mechanical Technician to join our dynamic maintenance team. This position plays a key role in keeping our high-speed food production facility running efficiently by performing preventive maintenance, troubleshooting, and repairs on electrical, mechanical, pneumatic, and hydraulic systems. The ideal candidate has hands-on experience in a manufacturing setting, especially in food or beverage production, and is proactive in identifying equipment issues and recommending improvements that support safety, efficiency, and product quality. Key Responsibilities: • Diagnose and repair mechanical, electrical, pneumatic, and hydraulic issues on various types of production equipment., • Perform scheduled preventive maintenance and inspections on equipment to ensure reliable operation., • Use CMMS (Computerized Maintenance Management System) to manage work orders and maintenance logs., • Inspect, repair, and replace machine components such as bearings, filters, wiring, valves, switches, and gauges., • Interpret electrical/mechanical blueprints and schematics to troubleshoot systems., • Adjust and calibrate control instruments and functional components., • Start, test, and monitor machines to ensure proper performance after maintenance or repair., • Support production uptime by responding to emergency breakdowns and participating in on-call coverage., • Document maintenance activity and communicate effectively across shifts to ensure continuity., • Maintain a clean and safe workspace, complying with OSHA standards, GMP practices, and internal food safety protocols., • Contribute to the continuous improvement of maintenance systems and processes., • Follow all company safety rules, procedures, and PPE guidelines at all times.Qualifications & Skills:, • Associate degree in Mechanical Engineering or equivalent technical training (preferred but not required)., • Minimum 3 years of experience as an industrial maintenance technician in a manufacturing environment., • Strong mechanical and electrical troubleshooting skills up to 480V., • Ability to read and interpret mechanical and electrical schematics., • Familiarity with bakery or food processing equipment is a plus., • Proficient in Microsoft Word, Excel, and Outlook., • Strong verbal and written communication skills., • Willingness to work flexible hours and overtime as needed., • NY Boiler License is a plus, but not required.Benefits:, • 401(k) Retirement Plan, • Medical, Dental, and Vision Insurance, • Paid Time Off (PTO), • Maternity & Paternity Leave, • Commuter BenefitsIf you're a hands-on maintenance professional with a passion for keeping production running at peak performance, we want to hear from you. Join a team where your skills make a direct impact every day.

Job Description About the Role: The Plant Engineer/Mechanic plays a critical role in ensuring the continuous and efficient operation of manufacturing and production facilities. This position is responsible for maintaining, troubleshooting, and repairing mechanical systems and equipment to minimize downtime and optimize plant performance. The role requires a proactive approach to identifying potential mechanical issues and implementing preventive maintenance strategies. The Plant Engineer/Mechanic collaborates closely with production teams to support operational goals while adhering to safety and quality standards. Ultimately, this position contributes to the overall reliability and productivity of the plant by applying technical expertise and problem-solving skills. Minimum Qualifications: • High school diploma or equivalent; technical certification or associate degree in mechanical engineering technology or related field preferred., • Proven experience as a mechanic or maintenance technician in an industrial or manufacturing environment., • Strong knowledge of mechanical systems, hydraulics, pneumatics, and industrial machinery., • Ability to read and interpret technical manuals, blueprints, and schematics., • Familiarity with safety standards and best practices in plant maintenance. Preferred Qualifications: • Certification in industrial maintenance or mechanical engineering (e.g., Certified Maintenance & Reliability Technician)., • Experience with computerized maintenance management systems (CMMS)., • Knowledge of electrical systems and controls as they relate to mechanical equipment., • Experience working in a lean manufacturing or continuous improvement environment., • Strong troubleshooting and diagnostic skills with a focus on root cause analysis. Responsibilities: • Perform routine and preventive maintenance on mechanical equipment and machinery to ensure optimal functionality., • Diagnose mechanical failures and execute timely repairs to minimize production interruptions., • Collaborate with engineering and production teams to plan and implement equipment upgrades and modifications., • Maintain accurate maintenance records and report on equipment status and repair activities., • Ensure compliance with safety regulations and company policies during all maintenance and repair tasks. Skills: The required skills enable the Plant Engineer/Mechanic to effectively maintain and repair complex mechanical systems, ensuring minimal downtime and sustained production efficiency. Proficiency in reading technical documents and schematics allows for accurate diagnosis and repair of equipment issues. Strong mechanical aptitude combined with hands-on experience supports the execution of preventive maintenance and emergency repairs. Preferred skills such as familiarity with CMMS and electrical systems enhance the ability to manage maintenance schedules and address interdisciplinary challenges. Additionally, troubleshooting and root cause analysis skills are essential for identifying underlying problems and implementing long-term solutions that improve plant reliability.

Job DescriptionIntroduction Gallagher is a global leader in insurance, risk management and consulting services. We help businesses grow, communities thrive and people prosper. We live a culture defined by The Gallagher Way, our set of shared values and guiding tenets. A culture driven by our people, over 55,000 strong, serving our clients with customized solutions that will protect them and fuel their futures. Overview Gallagher Bassett Technical Services is seeking a qualified Site Safety Manager to become a valued member of our Safety & Health team. The ideal candidate for this position must be a proactively motivated individual with the ability to manage projects and deliver quality consulting services with minor supervision. This Site Safety Manager position is a casual (on as needed basis, possibly going to a full-time) position overseeing safety operations for New York City metro area construction projects. The Site Safety Manager shall exclusively be responsible for safety matters related to the Work Site for which they are assigned to and shall not have any other responsibilities associated with the Contract. Responsibilities • This position will report directly to Director of Field Operations (NY Metro Area)., • Implement and enforce applicable construction site safety programs in accordance with all federal, state, local, and our customer’s needs., • Oversee and manage all site activities that relate to safe work practices. Review all construction/engineering designs and plans., • Ensure our Clients’ subcontractors perform all required actions and duties as it relates to system safety compliance; fire/ life safety; safety training; required safety certification; emergency procedures, plans and drills; and any other environmental safety/risk management compliance., • Safety/security implications related to contractor and subcontractor operations., • Perform daily safety inspection report audits and related testing and verification of operational safety readiness., • Coordination of other safety personnel for construction or build-out projects/activities., • Manage the supply and deployment of PPE to field personnel., • Coordination of Safety related items with the General Contractor’s office., • Familiarity with and environmental regulations and guidelines and workplace hazard controls; and ability to provide recommendations to reduce potential workplace hazards., • This position requires the ability early morning (A.M.) and late shift (P.M.) work hours, including weekends and holidays. Required Qualifications • High school diploma or GED equivalent, • A valid NYC Department of Buildings (DOB) Licensed Site Safety Manager, • A valid 62-hr. Supervisor SST card, • A valid FDNY Certificate of Fitness S56, • Past experience and/or familiarity with the commercial high rise and/or institutional building construction development projects., • Competent to instruct and provide training/instruction on-site personnel as needed., • Ability to read, write, and speak English fluently.Preferred:, • NYC DOB licensed Construction Superintendent, • Certified Health and Safety Technician (CHST) preferred, but not required., • Successful completion of the 30-hour OSHA Construction Safety & Health (29 CFR 1926) Course, • Active member of American Society of Safety Professionals (ASSP)., • Bi-lingual or multi-lingual communication skills., • Located in the NYC Metro area. Behaviors: • Ability to negotiate client properties including walking, climbing, lifting, and standing., • Ability to work independently to deliver on a timely basis with minimal supervision, • Strong organizational skills to participate in multiple projects simultaneously, prioritize assignments and prepare daily/comprehensive reports., • Strong analytical and critical thinking skills to interpret collected data/information, apply appropriate occupational safety and health standards/regulations, and offer recommendations for improvement., • Strong understanding of regulatory, professional, and industry standards and practices., • Proactive attitude and customer service focus., • Computer competency in Microsoft Office (MS) products including Word, Excel, PowerPoint, Outlook and Teams. Compensation and benefits On top of a competitive salary, great teams and exciting career opportunities, we also offer a wide range of benefits. Below are the minimum core benefits you’ll get, depending on your job level these benefits may improve: • Medical/dental/vision plans, which start from day one!, • Life and accident insurance, • 401(K) and Roth options, • Tax-advantaged accounts (HSA, FSA), • Educational expense reimbursement, • Paid parental leave Other benefits include: • Digital mental health services (Talkspace), • Flexible work hours (availability varies by office and job function), • Training programs, • Gallagher Thrive program – elevating your health through challenges, workshops and digital fitness programs for your overall wellbeing, • Charitable matching gift program, • And more... We value inclusion and diversity Apply to review our U.S. Eligibility Requirements and Pay Disclosure Statement Inclusion and diversity (I&D) is a core part of our business, and it’s embedded into the fabric of our organization. For more than 95 years, Gallagher has led with a commitment to sustainability and to support the communities where we live and work. Gallagher embraces our employees’ diverse identities, experiences and talents, allowing us to better serve our clients and communities. We see inclusion as a conscious commitment and diversity as a vital strength. By embracing diversity in all its forms, we live out The Gallagher Way to its fullest. Gallagher believes that all persons are entitled to equal employment opportunity and prohibits any form of discrimination by its managers, employees, vendors or customers based on race, color, religion, creed, gender (including pregnancy status), sexual orientation, gender identity (which includes transgender and other gender non-conforming individuals), gender expression, hair expression, marital status, parental status, age, national origin, ancestry, disability, medical condition, genetic information, veteran or military status, citizenship status, or any other characteristic protected (herein referred to as “protected characteristics”) by applicable federal, state, or local laws. Equal employment opportunity will be extended in all aspects of the employer-employee relationship, including, but not limited to, recruitment, hiring, training, promotion, transfer, demotion, compensation, benefits, layoff, and termination. In addition, Gallagher will make reasonable accommodations to known physical or mental limitations of an otherwise qualified person with a disability, unless the accommodation would impose an undue hardship on the operation of our business. Powered by JazzHR BZzgty9dFh

Job Description Network Engineer Location: Onsite NYC/NJ Department: Engineering/Delivery Division: Corporate Job Status: Full-Time Work Shift: 8:30 AM – 5:30 Candidates must reside within the New York City area and be available to attend an in-person interview immediately. The Opportunity BlackHawk Data is seeking a motivated, forward-thinking Network Engineer to support and deliver mission-critical technology solutions for some of the world’s most complex enterprises. BlackHawk Data is one of the fastest-growing, woman-owned IT solution providers in the country. Here, you won’t just do a job you’ll build a career that matters. Our culture thrives on curiosity, collaboration, and grit. We invest in our people, challenge them to grow, and celebrate wins together. If you are driven to learn, solve technical challenges, and make an impact, BlackHawk Data is where you belong. You will work alongside a highly collaborative, driven team to implement, support, and maintain network and infrastructure solutions that solve real business challenges, not just check boxes. The Network Engineer role is ideal for a hands-on, solutions-oriented professional with experience in networking, security, and infrastructure environments. This role is well-suited for someone who enjoys troubleshooting, supporting live environments, and working closely with both internal teams and clients across industries such as healthcare, financial services, education, and the public sector. If you are energized by problem-solving, passionate about technology, and eager to continue growing your skills in a dynamic environment, we want to meet you! Make an impact. Build what matters. Grow with us. Position Overview We are seeking Network Engineer Or Network Technician with hands-on experience in Cisco and Fortinet technologies and a solid understanding of routing protocols such as BGP, OSPF, and EIGRP. This role focuses on the implementation, support, and troubleshooting of network infrastructure to ensure reliable and secure connectivity across client environments. The ideal candidate is comfortable working in a fast-paced setting, supporting day-to-day operations, and contributing to network improvements as needed. Key Responsibilities Implementation & Support • Configure, deploy, and maintain network infrastructure including routers, switches, firewalls, and VPNs, • Support network upgrades, installations, and changes with minimal disruption to operations, • Assist in implementing routing protocols (BGP, OSPF, EIGRP) to support network performance and stabilityNetwork Monitoring & Troubleshooting, • Monitor network performance and identify issues impacting availability or performance, • Troubleshoot and resolve Layer 2/3 network issues across LAN/WAN environments, • Perform root cause analysis and support resolution of network outages and connectivity issues, • Utilize monitoring tools to maintain uptime and system healthSecurity & Maintenance, • Support firewall and VPN configurations to maintain secure network environments, • Assist in applying security best practices and addressing vulnerabilities, • Participate in routine maintenance, patching, and system updatesDocumentation & Collaboration, • Maintain accurate documentation including configurations, diagrams, and procedures, • Work closely with internal teams (engineering, support, project teams) to support client environments, • Provide support and knowledge sharing with team members as needed Qualifications Experience & Education • 5+ years of experience in network engineering, or Cisco CCNA certification with at least 1 year of relevant hands-on experience, • Experience working with Cisco and/or Fortinet networking technologies, • Exposure to routing protocols such as BGP, OSPF, and EIGRP, • Bachelor’s degree in a related field preferred, or equivalent hands-on experience Technical Skills • Strong understanding of networking fundamentals (TCP/IP, VLANs, VPNs, DNS, DHCP), • Experience with routers, switches, and firewalls (Cisco, Fortinet, or similar), • Familiarity with network monitoring tools and troubleshooting techniques, • Basic understanding of network security concepts and best practices, • Ability to troubleshoot and resolve network-related issues efficiently Travel Requirements • Ability to travel to customer sites throughout NYC, Long Island, Westchester, New Jersey, Connecticut, and surrounding areas., • Valid driver's license required., • Reliable transportation required., • Must be able to transport networking equipment and tools to and from customer locations when necessary. Preferred (Not Required) • Cisco CCNA or working toward certification, • Fortinet certifications (NSE/FCF/FCA), • Experience in a managed services or client-facing environment Work Environment & Location • Onsite role based in the NYC metro area (Manhattan, East Hanover, and client sites as needed), • Combination of on-site client work and remote flexibility, • May require occasional evening or weekend work based on project needs Benefits At BlackHawk Data, we provide a comprehensive benefits package to support your well-being in and out of work. This includes: • Medical, dental, and vision plans, • 401(k) with company match, • 15 days of PTO in your first year, • Paid company holidays, • Hybrid work options Powered by JazzHR guInpkALNa

Job Description POSITION SUMMARY Reports to: Safety Manager (SM) The Safety Coordinator (SC) role centers on ensuring that all project activities comply with federal, state, and local safety regulations while fostering a proactive safety culture on-site. This position manages safety and security matters at the Work Site for the duration of the Contract and involves conducting risk assessments, developing and implementing safety protocols, and collaborating with project managers and site supervisors to mitigate hazards. The SC is responsible for training personnel, performing regular inspections, and investigating incidents to identify root causes and prevent recurrence. His expertise is critical in maintaining a safe working environment, reducing injury rates, and ensuring regulatory compliance throughout the project lifecycle. The SC plays also a strategic role in shaping safety policies and driving continuous improvement initiatives. By analyzing safety data and trends, he provides actionable insights to enhance operational efficiency and reduce risk exposure. The position demands strong communication skills, attention to detail, and the ability to influence behavior across diverse teams. Ultimately, the SC contributes to the successful delivery of the construction project by safeguarding the health and well-being of all stakeholders and reinforcing the organization's commitment to safety excellence. The SC shall be independent of the physical construction effort and shall be available fulltime to fulfill the requirements of the Contract. The SE shall have the authority to stop Work if they determine that Unsafe Conditions are present. The SC’s key responsibilities are: • Implementing the Health and Safety Management System (HSMS)., • Participating in the development and implementation of HASP., • Developing and implementing site-specific safety plans and procedures., • Conducting regular safety audits and inspections of construction sites., • Identifying potential hazards and recommending corrective actions., • Ensuring compliance with OSHA, local, and federal safety regulations., • Investigating accidents and incidents to determine root causes., • Performing safety inspection, documenting and maintaining records on safety findings, inspections, incidents, and corrective actions., • Documenting any near misses or incidents., • Providing safety training and orientation for new employees and contractors., • Monitoring the use of personal protective equipment (PPE)., • Collaborating with project managers to integrate safety into planning and execution., • Reviewing construction plans for safety implications., • Conducting toolbox talks and daily safety briefings., • Completing Daily Safety Reports, tracking and reporting safety performance metrics., • Coordinating emergency response plans and drills., • Ensuring proper signage and barricading on-site., • Evaluating subcontractor safety programs and compliance., • Recommending improvements to safety policies and procedures., • Staying current with industry safety standards and best practices., • Supporting environmental health and safety (EHS) initiatives., • Managing safety documentation and reporting systems., • Advising on ergonomic practices and injury prevention., • Conducting job hazard analyses (JHAs) and risk assessments., • Participating in pre-construction and progress meetings., • Promoting a culture of safety among all site personnel., • Responding to safety-related inquiries and concerns., • Coordinating with insurance and legal teams on safety matters., • Ensuring safe operation of heavy machinery and equipment., • Monitoring weather conditions and adjusting safety protocols accordingly., • Overseeing fire prevention and control measures., • Implementing fall protection systems and monitor compliance., • Supporting continuous improvement through feedback and lessons learned., • Competent to instruct on-site personnel., • Notifying the PM of any H&S related nonconformities that may arise., • Addressing the Corrective/Preventive Actions issued following Internal Audits or indications received from the client, responsible agencies and following up on their implementation., • Communicating with all designated Competent Persons before, during, and after completion of their work shifts., • Complying with all NYCT and Metro-North specific safety rules and requirements., • Complying with all other AHJ specific safety rules and requirements. EDUCATION AND QUALIFICATIONS • Bachelor’s degree in Occupational Health and Safety, Engineering, Construction Management, or a related field., • Minimum of 2 years of experience in construction safety or a similar role., • Experience in the construction industry, tunnel, large infrastructure projects, healthcare, and mental health field., • Shall have demonstrated relevant safety experience on at least one (1) tunneling project., • Successfully NYCT and MNR Track Safety trained., • Successful completion of the 40-hour NYC-Department of Buildings Site Safety Manager Course., • Successful completion of the 30-hour OSHA Construction Safety and Health (29 CFR 1926) Course., • Certification such as CSP (Certified Safety Professional), CHST (Construction Health and Safety Technician), or equivalent is preferred., • A minimum of ninety (90) days prior ROW experience including flagging and diversions of service., • Active member of American Society of Safety Professionals (ASSP)., • Possess and maintain the current New York State Department of Labor Asbestos Inspectors License., • Possess and maintain a current C-3/C-5 Supervisor / Competent Person Training for De-leading of Industrial Structures Certificate., • Deep knowledge of construction, occupational health and safety is a must., • Understanding the OSHA guidelines, ISO 45001 requirements and all federal, state, and local safety regulations., • Certified in risk management and health/safety management. ISO 45001 Internal Auditor certification is preferred., • Familiarity with the tools, machines and equipment used in the tunnel., • Attention to detail. Critical thinking, analytical and problem-solving skills., • Ability to teach others the established safety standards., • Ability to work well as a team and interact with different groups of people., • Ability to manage multiple tasks and priorities at the same time while meeting deadlines., • Extensive attention to detail to distinguish safety hazards., • Ability to provide detailed reports and develop safety procedures., • Good understanding of data analysis and risk assessment., • Ability to recognize when safety conditions need improvement., • Ability to prioritize tasks especially when handling an accident or incident., • Excellent verbal, written and interpersonal communication skills across all levels of organization., • Knowledge of construction safety management. Possessing in-depth knowledge of general safety guidelines such as Occupational Safety and Health guidelines is a must., • Must be able to prioritize and multi-task in the face of many safety responsibilities/duties., • Computer literacy skills and comfort with various types of technology used in the industry. Advanced Microsoft Office suite (Word, Excel, PowerPoint). JOB REQUIREMENTS • Ability to lead safety training sessions and toolbox talks for diverse teams. Able to read, write, and speak English fluently., • Skilled in incident investigation, root cause analysis, and corrective action planning., • Proficiency in safety management software and reporting tools., • Excellent communication and interpersonal skills to collaborate with project managers, contractors, and workers., • Ability to perform regular site inspections and audits to ensure compliance., • Strong analytical and problem-solving skills with attention to detail., • Capable of working in high-pressure environments and managing multiple priorities., • Commitment to promoting a culture of safety and continuous improvement across all project phases., • Prepare and maintain records, reports, and formulate correspondence relative to the job., • Organize and take part in assessing accident/injury reports and arranging accident/injury-related statistics., • Identify the training and development needs of project staff and ensure that the needs are met., • Inspect machinery used on the site to find out possible unsafe conditions., • Work together with the emergency medical services to provide and organize emergency services for injured and/or sick staff., • Be regularly aware of new developments in safety laws that are bound to impact on the project., • Regularly provide training and coaching across all staff levels as required by all safety rules and regulations., • Make sure that new employees are well-informed as regards safety instructions before they start work and emphasize and explain any form of possible environmental hazard, including applicable precautions. PHYSICAL DEMANDS • Work is primarily performed at active construction sites, including underground and surface environments., • Must be able to stand, walk, and climb for extended periods; navigate uneven ground, scaffolding, and ladders; and work around heavy equipment., • Exposure to noise, dust, vibration, confined spaces, and varying weather conditions are common., • Requires regular use of personal protective equipment (PPE), including hard hats, safety boots, high-visibility clothing, and eye/ear protection., • Ability to perform site inspections, monitor field activities, and respond quickly to safety or operational issues in physically demanding conditions., • Flexibility to work extended hours, nights, weekends, and rotating shifts as project demands require., • Occasional office-based work is required for reviewing documents, preparing reports, and coordinating with project management teams. WORK ENVIRONMENT FCC is dedicated to creating an inclusive workplace where diversity is valued and respected. As an Affirmative Action/Equal Opportunity Employer, we do not discriminate against any applicant for employment or employee because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, genetics, creed, veteran status, military status, or any other characteristic protected under Federal, State, or local laws. Reasonable accommodation will be provided to qualified individuals with disabilities in accordance with applicable law.

Job Description Join the Team Behind Exceptional Respiratory Care Split Rock Rehabilitation & Health Care Center is seeking a Respiratory Equipment Technician to support our Respiratory Therapy Department. This role is ideal for someone who is organized, mechanically inclined, and enjoys working in a fast-paced healthcare environment. The Respiratory Equipment Technician plays a critical role in ensuring respiratory equipment is clean, functional, stocked, and ready for patient care. You will work alongside Respiratory Therapists to maintain ventilators, oxygen equipment, aerosol devices, suction equipment, and department inventory while helping deliver outstanding care to our long-term ventilator and pulmonary residents. Similar roles in healthcare focus on maintaining, cleaning, troubleshooting, and managing respiratory equipment and supplies to ensure safe patient care Job Description Job Title: Respiratory Equipment Technician Department: Respiratory Therapy Reports To: Respiratory Manager / Director of Respiratory Services Position Summary The Respiratory Equipment Technician is responsible for ensuring all respiratory equipment is clean, functional, properly maintained, and readily available for patient care. This position supports the Respiratory Therapy Department through equipment management, inventory control, preventative maintenance, and infection prevention practices. The technician does not provide direct respiratory therapy but serves as an essential support member of the respiratory care team. Essential Duties and Responsibilities Equipment Management • Clean, disinfect, inspect, assemble, and test respiratory equipment before reuse., • Perform routine operational checks on ventilators, BiPAP/CPAP devices, oxygen concentrators, aerosol equipment, suction devices, pulse oximeters, and related equipment., • Remove damaged or malfunctioning equipment from service and notify the Respiratory Manager., • Coordinate repairs with biomedical engineering or approved vendors. Inventory Management • Maintain adequate inventory of respiratory supplies including:, • Ventilator circuits, • HME filters, • Suction catheters, • Nebulizer kits, • Oxygen tubing, • Tracheostomy supplies, • Humidification equipment, • Emergency respiratory supplies, • Receive and organize deliveries., • Monitor expiration dates., • Assist with monthly inventory counts. Clinical Support • Deliver respiratory equipment throughout the facility., • Prepare equipment for new admissions., • Assist Respiratory Therapists with equipment setup., • Exchange oxygen cylinders and maintain emergency oxygen supplies., • Ensure crash airway equipment is stocked and ready. Documentation • Complete equipment cleaning logs., • Maintain preventative maintenance records., • Document equipment failures., • Track inventory usage. Safety • Follow OSHA, CDC, and facility infection control guidelines., • Properly disinfect all reusable respiratory equipment., • Report unsafe equipment immediately., • Maintain a clean and organized work environment. Experience • Healthcare or medical equipment experience preferred., • Respiratory, DME, biomedical, or central sterile experience preferred. Knowledge & Skills • Strong organizational skills., • Basic computer proficiency., • Mechanical aptitude., • Excellent communication skills., • Ability to prioritize multiple tasks., • Attention to detail. Physical Requirements • Lift up to 50 pounds., • Push and pull medical equipment carts., • Frequent walking throughout the facility., • Standing for extended periods., • Occasional bending, kneeling, and reaching. Work Environment • Skilled Nursing Facility, • Long-Term Ventilator Unit, • Exposure to cleaning chemicals and disinfectants, • Potential exposure to infectious materials with appropriate PPE Performance Expectations • Equipment is available and functioning when needed., • Department inventory remains fully stocked., • Equipment cleaning logs remain current., • Equipment failures are reported immediately., • Work area remains organized and survey-ready., • Supports the respiratory department in delivering safe, efficient, and high-quality patient care. This position is ideal for someone looking to begin a career in respiratory care, biomedical equipment, or healthcare operations while working closely with one of the most advanced long-term ventilator programs in the region.

Job Description Our ambition is to evolve internet infrastructure into a utility by building a product that caters to stakeholders from Customers, ISPs, Partners, and Technicians. Every utility starts with an installation – and that’s where you come in. The Technician Operations team is the live backbone of Meter’s deployment engine, ensuring that we deliver critical infrastructure on time, to standard, and with zero friction for our partners and customers. A Network is most vulnerable during deployment - and each stakeholder plays an essential role to ensure it’s built as performance and resilient critical infrastructure. Meter dedicates a team to each stakeholder, ensuring our product and work empowers stakeholders to do operationally and technically sound work at scale. In this role, you’ll build Meter for technicians. By guiding field technicians in real time, troubleshooting issues as they happen, and building the systems and tools that make installations effortless, you’ll ensure our product works where it matters most: in the field. What success looks like Your fingerprints will be on every installation, shaping the technician experience and driving the scale Meter needs to reach utility status. In your first six months, you will: Keep projects on track: Deliver >90% of installations on time by owning live technician support and unblocking issues in real time. Raise quality standards: Reduce rework rates <5% and ensure compliance with installation artifacts and validation checks. Accelerate installs: Partner with Operations Engineering to roll out automated technician tooling that cuts install validation times by 30%. What your day-to-day will look like From day one, you’ll be in the center of the action. A typical week might include: Running live installation support shifts - answering technician questions, guiding them through steps, and escalating blockers. Troubleshooting networking and hardware issues in real time, logging root causes, and ensuring fixes stick. Documenting progress across active installs and pushing updates to project managers and internal stakeholders. Spotting recurring issues and working with Operations Engineering to design new playbooks, tools, or product changes. Translating technician feedback into product improvements, ensuring our hardware and software are purpose-built for the field. Where you can take this role In year two, you could design automated validation tools that remove manual install steps, lead the rollout of new technician onboarding programs that cut ramp time in half, and shape product improvements that fundamentally change how installations are done in the industry. Your work will directly define how Meter scales installation quality and speed worldwide.

Job DescriptionAdministration / Production Control Technician Location: New York, NY Work Schedule This position follows a 3-day work week, with consecutive 12.5-hour shifts from 7:30 AM to 8:00 PM. The schedule includes weekends and holidays, with workdays rotating according to a predetermined schedule. • Weeks 1–4: Monday through Wednesday, • Weeks 5–8: Thursday through Saturday, • The rotation continues according to the established schedule.Job Summary The Financial Information Services Agency (FISA) is seeking an Administration / Production Control Technician reporting to the Night Shift Supervisor. The technician will be responsible for monitoring job flows controlled by the CA Workload Automation DE (dSeries) scheduling system. Jobs may execute on z/OS mainframe, UNIX, or PeopleSoft servers. The ideal candidate will have experience with production control, enterprise job scheduling, batch processing, and troubleshooting across mainframe and/or mid-range environments. The technician must be able to respond quickly to job failures, determine the general cause of issues, and coordinate with the appropriate on-call staff for remediation. The position may also require occasional software migration to production and/or test environments, documenting problems, establishing job-flow dependencies, and executing and troubleshooting test flows. Key Responsibilities • Monitor production job flows using CA Workload Automation DE (dSeries) or a similar enterprise scheduling platform., • Monitor jobs executing on z/OS mainframe, UNIX, and PeopleSoft environments., • Respond promptly to job failures and determine the general cause of production issues., • Contact and coordinate with appropriate on-call technical staff for issue remediation., • Escalate critical job failures and scheduling issues as appropriate., • Document production problems, job failures, and resolution activities., • Establish and maintain job-flow dependencies., • Execute and troubleshoot test flows., • Perform preliminary troubleshooting of schedulers, batch processes, and cycle flows., • Occasionally migrate software to production and/or test environments., • Support production control operations and ensure scheduled processing completes successfully., • Work with technical teams to resolve scheduling, batch, and infrastructure-related issues., • Follow established SDLC and production-control procedures.Preferred Skills, • Extensive experience working in Production Control environments involving mainframe or mid-range computer systems., • Experience establishing and managing job dependencies., • Experience troubleshooting JCL errors., • Experience working with GDGs, File-AID, and IDCAMS., • Knowledge of CA Workload Automation DE (dSeries) or a similar enterprise scheduling package., • Strong knowledge of z/OS JCL and TSO/ISPF., • Experience with mainframe compile, link, and bind procedures., • Familiarity with file transfer protocols and technologies such as FTPS and Connect:Direct., • Knowledge of UNIX environments., • Knowledge of IMS and DB2., • Knowledge of PuTTY and WinSCP., • Familiarity with Rational tools, including ClearQuest and ClearCase., • Familiarity with Microsoft Word and Excel., • Knowledge of PeopleSoft PeopleTools, particularly Process Monitor., • Strong understanding of standard Software Development Life Cycle (SDLC) methodologies., • Excellent oral and written communication skills., • Strong interpersonal, organizational, analytical, and problem-solving skills.Required Experience, • 3–5 years of related scheduling experience with a Windows-based scheduling system., • 5 years of experience escalating and documenting critical job failures and scheduling problems., • 5 years of hands-on experience executing and performing preliminary troubleshooting activities involving:, • Job schedulers, • Batch processes, • Cycle flowsMinimum Qualification Requirements Candidates must meet one of the following qualification pathways: • Bachelor's degree from an accredited college in Computer Science, Engineering, or a related field, plus 4 years of satisfactory full-time experience related to data center engineering and operations, cloud engineering and operations, or complex IT infrastructure engineering., • Bachelor's degree from an accredited college plus 8 years of satisfactory full-time experience related to data center engineering and operations, cloud engineering and operations, or complex IT infrastructure engineering., • A combination of education and/or experience equivalent to either of the qualifications above.

Job DescriptionTécnico Special Inspection Agency Is a registered class 1 special inspection agency; we provide TR1, TR2, TR4, TR5, and TR8, inspection. We are seeking qualified field inspectors to join our team. The work focuses primarily on high-profile projects throughout the New York City metro area. Responsibilities: • Observe work for conformance with plans and specifications of drawings, design documents, and building codes., • Ability to read, understand, and interpret construction plans & specs., • Must be able to prepare and submit timely and accurate field inspection reports. Qualifications: • Currently certified as ACI Level II or ICC Reinforced Concrete Inspector., • Familiar with NYC Building Code., • Strong verbal and written communication skills and ability to work well with others., • Reliable transportation to travel to job sites., • Preferred: 1+ years of construction, inspection experience., • Preferred: Bachelor’s Degree in Engineering or related education or industry experience. Additional national certifications such as ICC, CWI license or certification: Structural Steel and Bolting, Special Inspection Masonry Field Testing Technician, ICC Mechanical inspector.

Job Description Matrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at www.MWNE.com and True-Environmental.com to discover the full scope of our capabilities. We are currently seeking an experienced Industrial Hygiene Technician to participate in asbestos, lead, mold and universal waste project related assignments in the New York metro area. What you'll do • Performing air monitoring for asbestos abatement, lead and mold remediation activities, • Investigating indoor air quality and related water intrusion events, • Conducting job site health & safety inspections, • Performing routine site inspections, collecting bulk samples and creating reports according to applicable State and Federal protocols, • Develop reports, memos, addendums as required for project management review, to document site conditions and project-related issues, • Interacting with management, contractors & sub-contractors, coordinating site meetings, developing scopes of work and implementing project schedules, as assignedMinimum Qualifications, • High School diploma required, • Minimum of 2 years of experience preferred in performing asbestos, lead paint, IAQ, water intrusion/mold, general industrial hygiene, and facility-related abatement project monitoring and inspections., • Good oral and written communication skills., • A combination of the following certifications:, • EPA AHERA / NYSDOL Asbestos Inspector, Project Designer, Project Monitor and Air Sampling Technician, NYSDOL Mold Assessor, NJ/EPA/NY Lead Risk Assessor/Inspector and/or NYCDEP Asbestos Investigator., • Working knowledge of MS Office software (Word, Excel, Adobe, etc.), • Knowledge of applicable OSHA, EPA, and state regulations for asbestos, lead paint, etc., • Must be willing to travel to and from job sites within the NY area, • Must be able to pass a physical exam and be medically cleared to wear negative pressure respirator, • Must be available to occasionally work night or weekend hours may and/or extended shifts beyond 8 hours, • Must possess a valid driver’s license and an acceptable driving record, • Must successfully pass a pre-employment drug test and will be subject to DOT-regulated random drug & alcohol testingPreferred Qualifications, • AS or BS in physical sciences or industrial hygiene, safety, environmental sciences, or related science or engineering fields preferred, but not required, • Additional asbestos accreditations preferred: Management Planner /Supervisor/Project Designer, • OSHA 40-hour HAZWOPER, • Experience performing other IH-related work and non-IH environmental work, • Experience performing health and safety oversight, • Experience in construction management All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description SRE Engineering, D.P.C. · New York, NY · Part Time · On-site ABOUT SRE SRE Engineering, D.P.C. is a New York State and City certified M/WBE and DBE engineering and construction management firm with offices in Manhattan and Yonkers. We specialize in NYC municipal infrastructure — bridges, water mains, CSO facilities, pump stations, and coastal resiliency. We are a family-owned firm built on decades of institutional knowledge and deep relationships with NYC's regulatory agencies. Legacy Built. Woman Led. Future Driven. THE OPPORTUNITY SRE Engineering is seeking an experienced Hazmat/Environmental Inspector (NICET III) to support environmental compliance monitoring on a landmark NYCDOT bridge project Brooklyn. This project involves full bridge reconstruction within a sensitive urban parkland environment with active oversight from NYCDEP, NYCDPR, NYC Landmarks Preservation Commission (LPC), and NYSDEC. The role requires a detail-oriented professional with demonstrated experience in lead paint removal compliance, surface soil sampling, and multi-agency environmental coordination. QUALIFICATIONS • NICET Level III certification required, • ACI Concrete Field-Testing Technician Grade I certification required, • Minimum 5–7 years of construction inspection experience with a hazmat or environmental compliance focus, • NYCDOT or NYSDOT project experience required, • Experience with lead paint removal compliance, monitoring, and documentation on bridge construction projects required, • Experience with surface soil sampling protocols for lead, including sampling, analysis, and evaluation plan preparation required, • Familiarity with NYSDEC, NYCDEP, and NYC Department of Parks and Recreation environmental requirements required, • OSHA 40-hour HAZWOPER certification required; 8-hour annual refresher current, • Experience with erosion and sediment control measures, stormwater protection, and site runoff monitoring required, • Familiarity with LPC coordination requirements and environmentally sensitive urban construction sites preferred, • Experience coordinating with multiple regulatory agencies simultaneously on complex urban infrastructure projects preferred, • Strong written communication skills for regulatory documentation, field reports, and agency correspondenceRESPONSIBILITIES, • Monitor contractor compliance with lead paint removal plans, specifications, and all applicable safety standards, • Collect, document, and submit surface soil samples for lead analysis before, during, and upon completion of all lead paint removal activities, • Prepare and submit the sampling, analysis, and evaluation plan to NYCDOT for approval prior to implementation, • Monitor erosion control measures, sediment barriers, and stormwater protection measures throughout construction, • Ensure all required environmental protection measures are implemented to prevent contamination of Prospect Park Lake and surrounding parkland, • Coordinate with NYCDEP, NYCDPR, NYSDEC, and LPC on environmental compliance obligations and reporting, • Assist in reviewing and evaluating contractor proposals for handling and disposal of hazardous waste materials, • Prepare daily environmental inspection reports and maintain project records in accordance with MURK requirements, • Monitor landscape protection measures including tree protection, topsoil placement, and site grading in coordination with the project arborist, • Support the Resident Engineer with all environmental reporting, permit compliance tracking, and regulatory correspondence, • Maintain accurate electronic and hard copy environmental records throughout the construction period

Job Description Matrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at www.MWNE.com and True-Environmental.com to discover the full scope of our capabilities. We are currently seeking a highly experienced Industrial Hygiene Specialist to independently manage and execute asbestos, lead, mold, and general industrial hygiene project consulting assignments in the New Jersey / New York metro area. Annual Salary Range: $40 – $55 per hour commensurate with experience and certifications What You'll Do • Independently perform and manage air monitoring for asbestos abatement, lead, and mold remediation activities., • Conduct complex indoor air quality investigations, including sampling design and interpreting results related to water intrusion events., • Serve as the primary on-site representative for routine and non-routine site inspections, including comprehensive bulk sample collection., • Develop complete, high-quality technical reports, memos, and addendums, requiring minimal review from Project Management, to document site conditions and project-related issues., • Conduct job site health & safety inspections and identify/document potential hazards., • Interact directly with contractors and sub-contractors to coordinate site access and daily activities., • Mentor and train Junior Technicians on field procedures, safety protocols, and sampling techniques.Minimum Qualifications, • High School diploma required; AS or BS degree in a related field is strongly preferred., • Minimum of 3-5 years of direct experience performing asbestos, lead paint, IAQ/mold, and general industrial hygiene monitoring/inspections., • Strong oral and written communication skills with proven ability to draft professional technical reports., • Possession of a comprehensive combination of certifications (minimum of 3 of the following):, • EPA AHERA / NYSDOL Asbestos Project Monitor and Air Sampling Technician, • NYSDOL Mold Assessor, • NJ/EPA/NY Lead Risk Assessor/Inspector, • NYCDEP Asbestos Investigator, • Thorough working knowledge of MS Office software and industry-specific software/databases., • Strong knowledge of applicable OSHA, EPA, and state/local regulations for asbestos, lead paint, etc., • Must be willing to travel to and from job sites within the NJ / NYC area., • Must be able to pass a physical exam and be medically cleared to wear negative pressure respirator., • Must be available to occasionally work night or weekend hours and/or extended shifts beyond 8 hours., • Must possess a valid driver’s license and an acceptable driving record., • Must successfully pass a pre-employment drug test and will be subject to DOT-regulated random drug & alcohol testing.Preferred Qualifications, • OSHA 40-hour HAZWOPER certification., • Additional asbestos accreditations (e.g., EPA/NYSDOL Project Designer, Certified Safety Professional)., • Experience performing health and safety oversight and/or construction management. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Matrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at www.MWNE.com and True-Environmental.com to discover the full scope of our capabilities. We are seeking an experienced Senior CAD Technician/Specialist to support our Land Survey group in preparing high-quality survey deliverables for New York City and State agency projects. The ideal candidate will have a strong background in AutoCAD Civil 3D, and or MicroStation, solid understanding of survey workflows, and hands-on experience working on projects for MTA, DDC, DEP, DOT, Parks, and other public agencies. What you'll do • Draft and produce survey drawings including topographic, boundary, ALTA/NSPS, right-of-way, and utility surveys in compliance with agency standards., • Process field data and generate accurate base maps and digital terrain models (DTMs)., • Ensure CAD deliverables meet NYC agency CAD standards, coordinate systems, and layer naming conventions., • Collaborate with field crews, project managers, and engineers to maintain data consistency and resolve discrepancies., • Prepare record maps, easement maps, as-built drawings, and legal description exhibits., • Organize and manage CAD files and survey data efficiently across multiple projects., • Support proposal and QA/QC efforts by maintaining documentation and CAD templates.Minimum Qualifications, • 5+ years of CAD drafting experience in land surveying or civil design., • Proficiency in AutoCAD Civil 3D (required); familiarity with MicroStation., • Demonstrated experience with New York City and State agency projects (MTA, DDC, DEP, DOT, Parks, etc.)., • Strong understanding of survey data processing, coordinate systems, and geospatial references., • This role will require the successful completion of fit for work testing which includes Drug & Alcohol testingPreferred Qualification, • Excellent attention to detail, communication, and organizational skills., • Ability to work independently while coordinating with multi-disciplinary teams., • Associate degree or higher in Surveying, Civil Technology, or related field preferred. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Building a Brand starts with a Story FIRST is a leading global brand experience agency providing Content, Creative, Digital Technology, Management & Delivery, and Data & Insights services. For 30 years, we have utilized three flexible delivery models: Embedded teams, Corporate Campus operations, and a Full-Service Agency. Managing over 37,000 events & projects annually across 110 countries, FIRST serves 130+ brands, specializing in Fortune 500 companies within the Financial Services, Technology, Healthcare, Media, and Professional Services sectors. FIRST is part of the broader Encore family of companies. Encore is a global leader in event production and technology. Consistently recognized for excellence, recent honors include 2026 Chief Marketer Agency of the Year, the Ad Net Zero Award for sustainability, and more. Learn more at www.firstagency.com What You Would Get To Do In this capacity, the ideal candidate would represent the FIRST brand as an implanted team member for a well-known technology company. The Event Technician will be responsible for executing the technical production for mid-level events requiring support with Audio/Video, staging, lighting and design needs. The role requires strong technical understanding and practical experience operating event production systems, with extensive experience in A/V and technical direction for both corporate events and live experiential events. For events, the goal is to provide a seamless technology experience to all attendees, press and partners, as well as create an efficient and reliable technical environment for event staff and vendors. In this role you'll work with internal teams as well as external clients and vendor partners on a daily basis. Essential Duties & Responsibilities • Operate event production equipment including but not limited to Yamaha CL series audio desks, ETC lighting consoles, Ross Carbonite vision switchers, and PTZ camera controller, • Provide feedback to facility Team Lead on event production equipment usage and efficiency including but not limited to Yamaha CL series audio desks, ETC lighting consoles, Ross Carbonite vision switchers, and PTZ camera controllers, • Actively liaise with the event production Team Lead to provide feedback and suggestions on possible enhancements and improvements to the space, • Identify to Team Lead new and alternative ways of approaching FIRST's technical production offering to clients, • Manage client expectations on production challenges, proactively providing solutions, • Coordinate and support building of staging and A/V set up on-site as required, • Perform day-to-day housekeeping and maintenance of a hi-tech conference venue, • Provide full event production support including but not limited to forwarding slide decks, video playback, live stream coordination, graphic support, and multi camera operation, • Basic editing of video footage to provide clients with recordings of their event, • Coordinate with systems engineers on troubleshooting and incident resolution, • Provide white glove customer service to clients and stakeholders, • Perform regularly scheduled system maintenance checks to ensure all A/V equipment is working properly, in collaboration with the engineering team, • Flex into operating other event production areas as skills and training allows What We Are Looking For Please be aware that we know experience does not always look like we describe it. If you believe you would be an excellent fit for this role, please apply - we would love to see how you could fit at FIRST. • Position requires 2-4 year of experience, • Full understanding of audio visual technology and advancements including lighting, audio/video output, and power, • Experience with Unilumen LED walls and WATCHOUT software is a plus, • Experience working with the following equipment / tools is helpful: Yamaha CL series audio desks; Adobe Premiere Pro & Creative Cloud Suite; Keynote; Google Workspace; ETC Ion lighting desk; Crestron Control systems, ROSS Carbonite and Ultrix vision systems, Panasonic PTZ camera controllers, Dante Controller, Shure Wireless Workbench, QLab, and Riedel Communication systems., • Proficient in the technical delivery of high-quality events, • Video output experience with strong technical understanding of associated systems, • Excellent communication and customer service skills are a must to build and maintain relationships, • Ability to prioritize while adhering to critical project timelines in a fast-paced environment, • Experience managing day-to-day changes at every level of detail, • Ability to manage many projects at once with varying levels of production, • Knowledge of PTZ cameras and controllers, • Knowledge of livestream/ broadcasting (especially streaming to the internet), • Must be fluent in English, • Ability to work onsite, • This role will be assigned to a primary location but will require flexibility to be deployed to support across the campus as required At FIRST, we believe that our success is driven by the passion, creativity, and commitment of our teams. That's why we offer a range of benefits and perks to support your personal and professional growth. • Medical, Dental & Vision which includes the option of a high deductible health plan (HDHP) with a health savings account (HSA), • 401 (k), • Five Flexible Spending Accounts Options, • Generous Paid Time Off Allowance, • Employee Assistance Program (EAP), • Life, Disability & Pet Coverages, • Wellness Stipend, • Complimentary access to Headspace, Teladoc, Maven, Rocket Lawyer, Mobilo & more, • Aura Identity Theft Protection, • Discretionary Bonus Structure, • Global Opportunities: With a presence in 7 countries worldwide, including headquarters in London, New York, and Singapore, you may have the opportunity to work on exciting projects across different locations. United States Residents: The base pay for this position ranges from $63,143.00 - $72,614.00. This role is also eligible for an annual discretionary bonus and overtime compensation, in accordance with applicable policies. #LI-MV FIRST is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. FIRST is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements and individual qualifications without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. We stand firm: FIRST will not tolerate discrimination or harassment based on any of these characteristics. If any candidate feels that they are unable to meet the requirements of the role, please get in touch to discuss adjustments or other suitable roles.

Job Description Mechanical Engineering AI Expert Remote | Contractor | $50–$150 per hour equivalent We are recruiting experienced Mechanical Engineering AI Experts to support a large-scale project helping train and evaluate next-generation AI systems. No previous AI experience is required. Your engineering expertise is what matters. The Role Depending on your background, work may include: • Reviewing AI-generated engineering answers for technical accuracy, • Solving mechanical engineering problems, • Creating technical questions, assessments and grading criteria, • Reviewing CAD models, drawings and technical documentation Working with FEA, stress analysis, thermodynamics, dynamics, vibration or fluid mechanics Analysing test data, sensors, instrumentation and failure reports Producing clear explanations of engineering reasoning Supporting AI training with realistic engineering scenarios and technical content We’re Looking For You could come from a background such as: • Mechanical Engineer, • Mechanical Design Engineer, • FEA / Simulation Engineer, • R&D Engineer, • Mechanical Engineering Technician, • Test Engineer, • Manufacturing Engineer, • Mechanical Engineering Lecturer / Professor / Researcher Ideally, you will have: A degree, MSc, PhD or recognised technical qualification in Mechanical Engineering • OR substantial hands-on mechanical engineering experience, • Typically 4–5+ years of relevant experience, • Strong technical problem-solving ability, • Excellent written communication Experience with engineering drawings, calculations, testing, CAD, FEA or technical documentation Experience with SolidWorks, NX, Creo, CATIA, ANSYS, Abaqus or Nastran may be advantageous for some projects. Contract Projects are fully remote and typically move quickly, with successful applicants often starting within 24–48 hours of onboarding. Compensation varies by project and expertise, typically equivalent to around $50–$150 per hour. If you are an experienced Mechanical Engineering AI Expert interested in applying your technical knowledge to advanced AI projects, apply today. Essential requirements • A degree, MSc, PhD or recognised technical qualification in Mechanical Engineering, • OR substantial hands-on mechanical engineering experience, • Typically 4–5+ years of relevant experience, • Strong technical problem-solving ability, • Excellent written communication, • Experience with engineering drawings, calculations, testing, CAD, FEA or technical documentation

Job Description Looking for a biomedical engineer (BMET-2 or 3) to diagnose and repair clinical engineering equipment as well as perform electrical safety, preventative maintenance, and calibration on biomedical devices. Will work in a team atmosphere setting, in-house, managing medical assets for a top-rated area hospital network. The position is regionally centered in the NYC/LI/NJ area with related trips to our Yonkers and Stamford, CT warehouses. Candidates should have 3 years of experience in the field; comparable durations in adjacent fields may be considered. Additional training and in-service will be provided in-house and via OEM. Education in biomedical, mechanical, or electrical engineering is a must, with biomedical engineering degrees given preferential consideration. If education is outside these parameters, the candidate should have a solid experience background in the industry. Though the position is regional (NYC/LI/NJ area), the candidate will have opportunity for business travel if they desire it via our locations and business throughout the East Coast. Full-time position with top-rated benefits, competitive pay, and great company culture. Job sites at a top healthcare facility in NY with opportunities to travel. We are looking for a candidate for a long term with our organization, to grow with our national expansion and broaden their skill set. Currently open positions for both in-house roles and regional/travel roles.

Job Description Business Development Executive Are you tired of working for a private equity-backed or publicly traded company? Do you want to work somewhere that has a soul — and is good for your soul? That's Mason. About Mason Technologies As a Business Development Executive at Mason Technologies, you’ll join a nationally recognized leader in structured cabling, audiovisual, unified security solutions, and emerging technologies — built on experience, integrity, innovation, and a true people-first culture. With nearly 200 W-2 technicians and more than 80 support staff across project management, operations, engineering, and other critical functions, Mason delivers the expertise, resources, and reliability needed to execute complex projects nationwide. Our experienced workforce, with an average technician age of 44, brings decades of industry knowledge and hands-on expertise to every engagement. Diversity and inclusion are core to who we are. Our team represents people from more than 30 countries and is comprised of over 67% women and minorities, bringing diverse perspectives, experiences, and ideas to everything we do. At Mason, people of all backgrounds and religions are welcome, and we are committed to creating an environment where everyone feels respected, valued, and that they belong. Founded in 2002 by Jennifer Mason, who continues to lead the company today, Mason was built with a clear vision: to create a best-in-class technology organization grounded in trust, excellence, and innovation. We invest in our people, our partners, and our clients because we believe lasting success is built through strong relationships. Why Mason? At Mason, Business Development Executives have the opportunity to build significant financial success through a strong base salary and uncapped, profit-based commission structure, supported by best-in-class benefits. Just as importantly, we provide the resources you need to take care of your clients at every stage of the relationship: • World-class project managers, • Elite design and engineering teams, • Best-in-industry customer service and operational support But Mason is about more than business. We believe the workplace should feel like a community. We sponsor blood drives, surprise our teams with Mister Softee trucks, host Warehouse Jams to showcase employee musical talent, and support our people when life happens personally. When you join Mason, you become part of the Mason family — a company where people genuinely care about one another. Success in this role requires self-motivation, exceptional communication skills, strong relationship-building instincts, and a drive to continually excel — while consistently upholding Mason’s values of honesty, integrity, professionalism, and respect. Position Overview This role is designed exclusively for GOLDEN UNICORNS — rare, proven business development professionals who bring an established book of business and trusted enterprise-level relationships they can introduce to Mason from day one. This is not a training role. We are looking for seasoned professionals who have already built meaningful relationships and know how to turn those relationships into opportunity. Industry background is not the deciding factor — if you have established enterprise connections in any industry and can leverage those relationships to generate meaningful business, we want to meet you. As Founder and CEO Jennifer Mason says: “People do business with people they want to — and make the numbers work.” Responsibilities • Respect and uphold the Mason culture by treating everyone within the Mason family with professionalism, respect, and integrity — from the warehouse team to company leadership., • Build, maintain, and grow long-term relationships with enterprise-level clients, strategic partners, and key stakeholders., • Leverage an existing network of trusted relationships to identify, develop, and generate new business opportunities for Mason., • Own and manage partnerships, prospects, and client relationships from initial introduction through execution and ongoing account development., • Collaborate with Mason leadership to develop, negotiate, and close business opportunities with a focus on long-term value and sustainable revenue., • Partner closely with internal teams, including estimating, engineering, operations, and project management, to ensure seamless execution and exceptional client outcomes., • Learn and follow Mason’s internal processes, policies, and procedures, including effective use of CRM tools to manage opportunities, relationships, and communication., • Foster an inclusive work environment that reflects and reinforces the values of the Mason family. Qualifications • YOU CARE DEEPLY ABOUT PEOPLE, COMMUNITY, AND THE WORLD AROUND YOU., • Established enterprise-level client relationships and a demonstrated ability to leverage those relationships to generate and grow new business., • A strong network of relationships that may include end users, strategic partners, enterprise decision-makers, or other key stakeholders., • Proven success in business development, sales, relationship management, or a similar client-facing role., • Exceptional communication, interpersonal, and relationship-building skills., • Highly self-motivated, entrepreneurial, and driven to create opportunities., • Strong business judgment and the ability to build trust with senior-level decision-makers., • High level of professionalism, integrity, and accountability. Compensation Package $90,000.00–$120,000.00 per year + Uncapped Profit-Based Commission Employment Type: Full-Time We are currently only considering candidates who already live within commuting distance of our NYC office at 39 Broadway. This role is not open to relocation, and relocation assistance is not provided.

Job Description Laboratory Technician I Company Overview Camin Cargo is a leading provider of inspection, testing, and certification services in the oil and gas industry. We are committed to ensuring the highest standards of safety, quality, and compliance for our clients worldwide. We are seeking an energetic Laboratory Technician I to join our team. Position Summary The Laboratory Technician I is responsible for conducting routine laboratory tests and analyses on various samples related to crude oil, refined products, and petrochemicals. This entry-level position requires attention to detail, adherence to safety standards, and the ability to accurately document test results. Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. • Perform routine laboratory tests and analyses on crude oil, refined petroleum, petrochemical products, and quality control samples., • Record test results, input data, and analyze findings for review by senior laboratory staff or management., • Ensure that all samples are accurately labeled and documented for traceability and regulatory compliance., • Enter test results and data into the company’s internal software systems for tracking and reporting purposes., • Follow safety protocols and best practices for handling hazardous materials and operating laboratory equipment., • Assist in maintaining and organizing the laboratory inventory., • Support senior technicians and lab supervisors in specialized testing as needed., • Contribute to maintaining the cleanliness and orderliness of the laboratory., • Participate in training sessions and professional development opportunities as required., • All other job duties as defined. Minimum Requirements • Associate's degree in a relevant field (Chemistry, Chemical Engineering, or a related science preferred)., • 0-2 years of experience in a laboratory setting, preferably in the oil and gas industry., • Knowledge of laboratory safety procedures and practices., • Strong attention to detail and ability to handle multiple tasks., • Ability to follow instructions accurately and work under minimal supervision., • Good written and verbal communication skills., • Visual acuity to interpret test results and operate laboratory instruments., • Proficient in Microsoft Office Suite (Word, Excel, Outlook)., • Ability to learn new software systems and applications specific to the company's internal processes., • Must be able to work effectively both independently and as part of a team. Fitness for Duty – Physical Demands • The position requires prolonged periods of standing and walking during sample preparation, testing, and equipment calibration., • Ability to lift and carry up to 30 pounds, such as chemical containers or laboratory equipment., • Working in varying environmental conditions, including exposure to chemicals and laboratory hazards, while adhering to safety protocols., • Ability to wear personal protective equipment (PPE), including gloves, safety glasses, lab coats, and respirators, as necessary. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Job Description A Technician performs the assembly, testing, and verification of advanced fluid‐control components for Aerospace, Nuclear and other applications. This role is ideal for a hands‐on technician who thrives in a precision manufacturing environment and enjoys working with complex electro‐mechanical systems. Key Responsibilities • Perform assembly and performance testing of mechanical and/or electro‐mechanical fluid‐control devices in accordance with engineering procedures, blueprints, and schematics., • Operate, maintain, and help develop high‐pressure test systems, including pneumatic, hydraulic, and calibration‐fluid test stands and pumps., • Conduct electrical testing and verification using a variety of electronic diagnostic tools., • Work within controlled clean‐room environments and conduct particulate analysis with accurate data collection., • Troubleshoot, repair, and validate hardware using systematic diagnostic methods., • Utilize oscilloscopes, and other diagnostic equipment to support testing and analysis., • Maintain a clean, safe, and organized work area., • Lift and move equipment or components up to 50 lbs as needed. Required Skills & Experience • Minimum 5 years of technical or mechanical maintenance experience., • Experience using various hand and measurement tools including but not limited to torque wrenches, height gauges, and calipers., • Ability to read and interpret blueprints, schematics, and technical procedures., • Proven experience assembling and testing electro‐mechanical hardware., • Hands‐on experience with high‐pressure fluid, gas, and cryogenic testing., • Proficiency in electrical testing, including dielectric and insulation‐resistance testing., • Strong computer literacy, including Microsoft Word and Excel., • Experience working in clean‐room environments., • Manufacturing or machining experience is a plus., • Demonstrated ability to troubleshoot and repair hardware using diagnostic tools. Education • Minimum: High School Diploma, • Preferred: Vocational school graduate, Associate Degree or Certificate in Engineering Technology Additional Considerations • Strong team orientation and ability to collaborate across functions., • Capable of working independently with minimal supervision., • Willingness to mentor junior technicians. 1st & 2nd shifts available... Please visit Valcor.com to see all of our exciting opportunities! All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Salary Range:$34.00 To $50.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description We are seeking a skilled, organized, and dependable CNC & Digital Fabrication Technician to support CNC programming, machine setup, CNC machining, and digital fabrication production for fast-paced, creative projects. Reporting functionally to the Digital Fabrication Department Head or Production leadership and working closely with project, design, production, and fabrication teams, this position supports CNC and digital fabrication production across the project lifecycle. This role is intended for a hands-on technician who can support daily production while continuing to develop stronger CAD/CAM experience through mentorship, training, and hands-on production experience. The ideal candidate is curious, flexible, and motivated by engineering, fabrication, creative problem-solving, with the ability to work well under pressure and deliver exception results. This position is ideal for someone eager to grow within a developing Digital Fabrication Department. Salary Range: $25 – $35 / hour (Dependent on experience) PRIMARY RESPONSIBILITIES CNC Programming, Operation & Digital Fabrication • Create, modify, and troubleshoot CNC toolpaths using Fusion 360 CAM and related shop workflows., • Translate Rhino models, drawings, and project documentation into accurate, production-ready machine workflows., • Run approved CNC programs and DFAB files across assigned equipment., • Support CNC setup, material loading, tool changes, and machine preparation., • Support CNC machining strategies for nested sheet-good, multi-operation, and 2-sided workflows., • Select and adjust CNC tooling, feeds, speeds, fixturing, and machining parameters with guidance as needed., • Prototype, test, and refine fabrication approaches for assigned work under department direction., • Operate Homag, Weeke, laser, 3D printing, thermoforming, and related equipment in accordance with shop standards., • Monitor machine performance and troubleshoot programming, tooling, or machine-related issues., • Inspect digitally fabricated components for accuracy, finish quality, and alignment with design intent. Workflow Coordination & Cross-Department Collaboration • Collaborate with Project/Production Managers, and Technical Designers to align scope, schedule, and shop capacity., • Support DFAB file preparation through review, flattening, batching, labeling, and Design coordination., • Flag missing, conflicting, or incomplete design information before machine production begins., • Support fabrication means, methods, and production strategies for complex builds., • Execute assigned machine queues as directed by department and production leadership., • Communicate production status and flag capacity, schedule, tooling, machine, material, or consumable concerns., • Participate in pre-production planning and post-project reviews to support execution and improve workflows., • Support peak-period AM/PM shift coverage, extended hours, evenings, or weekends when workload requires., • Collaborate across departments and take on tasks as needed to support overall shop capacity. Standards, Organization & Continuous Improvement • Maintain organized CAM files, machine settings, handoff notes, reports, and production documentation., • Support machine incident reports, production reports, and project-based material usage tracking., • Support development of department standards, SOPs, training materials, and documentation systems., • Reinforce standards across programming, setup, file organization, and production handoffs., • Coordinate material workflows, including sheet staging, nesting priorities, and machine readiness., • Monitor tooling, materials, and consumables, proactively flagging shortages and recurring issues., • Utilize CutRite and material management systems to support workflow optimization and material efficiency., • Support preventive maintenance and upkeep of CNC and related equipment, ensuring machines remain production-ready., • Support maintenance, repairs, service visits, and equipment priorities with the Equipment & Facilities Manager and Leads., • Stay current with relevant DFAB tools, materials, and production methods., • Maintain a clean, organized, and safe work environment, following all shop safety protocols. Requirements • High school diploma or equivalent; background in industrial design, architecture, or related field preferred., • 2+ years of CNC machining and CAM programming experience in fast-paced creative production workshops., • Working knowledge of Fusion 360 CAM and Rhino; Grasshopper or similar tool a plus., • Ability to execute complex machining operations, including multi-operation setups and 2-sided machining., • Ability to translate 3D models, shop drawings, and technical documentation into production-ready machine workflows., • Basic understanding of materials, tooling, feeds/speeds, fixturing, and fabrication methods., • Experience working with wood, MDF, plywood, plastics, foams, acrylics, laminates, and specialty sheet goods., • Experience with Homag/Weeke systems, CutRite, WoodWop, WoodCAD|CAM, or Intellistore preferred., • Hands-on experience with laser cutting and 3D printing workflows, including file prep, setup, and troubleshooting., • Working knowledge of thermoforming, plexi-polishing, fabrication, assembly, and material preparation methods., • Working knowledge of MS Office suite and Windows-based workflows, especially Excel., • Strong communication, organization, problem-solving, and leadership maturity when working cross-functionally., • Calm, collaborative, detail-oriented, and adaptable in fast-paced production environments., • Must be professional, punctual, and dependable, with a strong sense of accountability., • Must be available to work extended hours, evenings, and weekends during peak fabrication periods., • Physically capable of lifting and handling oversized sheet goods., • Forklift / hi-lo experience or willingness to be trained and authorized preferred., • Must be eligible to work in the U.S. ABOUT US TWOSEVEN is a multidisciplinary design/build firm located in Brooklyn, New York. We specialize in creating store window displays, retail interiors, showrooms, and event activations for high-profile fashion, luxury, and lifestyle brands. TWOSEVEN offers a wide range of services - combining a design studio, fabrication workshop, and installation team, all under one roof. We devote ourselves to excellent craftsmanship, high-quality design, and attention to detail. Join our creative, friendly, and dynamic workplace. TWOSEVEN is an Equal Opportunity Employer. Benefits • Employee Health Insurance. Three plans are available after a two-month waiting period, with TwoSeven covering from 55 to 70% of the premium., • (401k) After one year of employment, up to 4% of the salary matched., • Profit-sharing of up to 5% of salary after 1 year of employment., • Up to 80 hours PTO per year., • Up to 40 hours of sick leave per year., • 6 Paid holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day)., • Life, short-term, and long-term insurance., • Paid Family Leave.

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at www.MWNE.com and True-Environmental.com to discover the full scope of our capabilities. We are currently seeking a highly experienced and certified Senior Industrial Hygiene Technician/Project Manager to provide advanced technical execution, site leadership, and mentorship for our industrial hygiene and regulated building materials projects in the New York metro area.Annual Salary Range: $55 – $75 per hour commensurate with experience and advanced certificationsWhat You'll Do • Lead and execute complex, high-risk field assignments, including specialized monitoring for asbestos, lead, mold, and general industrial hygiene exposure assessments (e.g., noise, chemical air sampling)., • Act as the lead site technician and on-site client/contractor liaison for large-scale or multi-phase projects, ensuring all field work aligns with the approved scope and regulatory requirements., • Conduct and document comprehensive site investigations, risk assessments, and final clearance inspections with minimal oversight., • Perform initial quality review of field data, photographs, and chain-of-custody forms collected by junior staff to ensure accuracy and compliance., • Draft highly technical field reports, data summaries, and regulatory compliance documents for final review by the Project Manager or Certified Industrial Hygienist (CIH)., • Provide on-the-job mentorship and technical training to Junior and Mid-Level Technicians on advanced sampling techniques, complex abatement procedures, and regulatory interpretation., • Ensure rigorous compliance with OSHA, EPA, and state/local EHS regulations on all assigned projects., • Maintain, calibrate, and troubleshoot sophisticated industrial hygiene monitoring equipment. Minimum Requirements, • High School diploma required; AS or BS degree in Industrial Hygiene, Environmental Science, Safety, or a related field is strongly preferred., • Minimum of 7+ years of dedicated experience in performing asbestos, lead paint, mold, and general industrial hygiene field monitoring and inspections., • Advanced combination of IH certifications is mandatory:, • NYSDOL Asbestos Project Monitor and Air Sampling Technician (AHERA accreditation preferred)., • NYSDOL Mold Assessor., • NJ/EPA/NY Lead Risk Assessor/Inspector (or equivalent advanced accreditation)., • NYCDEP Asbestos Investigator., • Expert working knowledge of federal, state, and local IH and EHS regulations (OSHA, EPA, NYCDEP, NYSDOL, etc.)., • Proven ability to write clear, technically accurate field reports and mentor junior colleagues., • Must be available to provide site coverage for off-hours and extended shifts as necessary., • Must be able to pass a physical exam and be medically cleared to wear negative pressure respirator., • Must possess a valid driver’s license and an acceptable driving record., • Must successfully pass a pre-employment drug test and will be subject to DOT-regulated random drug & alcohol testing.Preferred Qualifications, • OSHA 40-hour HAZWOPER certification., • Additional advanced accreditations (e.g., Asbestos Project Designer or Supervisor)., • Proven experience in general health and safety oversight (beyond RBMs) or construction safety management., • Working towards a professional certification such as CIH or CSP.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description The Landline Company (landlineco.com) is revolutionizing air travel by bridging the gap between regional communities and major airline hubs. We partner with top airlines like American and Air Canada to offer innovative multimodal connections across North America. We’ve launched a first of its kind remote terminal checkpoint to expand the reach of major metro airports into local neighborhoods . Our luxury motorcoaches replace short flights with a faster, more sustainable alternative in reducing costs, addressing pilot shortages, and enhancing passenger journeys. Salary: 90,000 – 120,000 Job Type: Full Time, Salary Exempt The Role: The Fleet Manager oversees Landline’s fleet management and maintenance functions. The role ensures the fleet is safe, clean, compliant, available, and maintained in accordance with OEM maintenance intervals, regulatory and Landline operational requirements. The Fleet Manager is the single point of contact for the Landline leadership team, maintenance business partners, OEMs, and our dispatch team. The role will lead the maintenance function within Operations. This includes 2-4 direct reports, both salaried (fleet manager) and hourly (in-house mechanics) which may expand over time What You’ll Do: • Own the maintenance function at Landline with the plan, vendors and data for our fleet, with a path to scaling to support a 100-motorcoach fleet in the future, • Build and maintain a rolling maintenance forecast aligned to OEM intervals and usage patterns, keeping every vehicle within OEM PM intervals, • Maintain the maintenance budget with Finance, including updates and variance reporting, • Coordinate unscheduled and corrective maintenance without disrupting service operations, • Keep accurate service records in Fleetio and Samsara; track DVIR resolution and escalate out-of-service conditions to System Operations Control (SOC - Dispatch), • Manage parts and consumables procurement and validate pass-through costs from our maintenance partners, • Flag recurring issues or vehicles approaching end of useful life using maintenance data, • Serve as Landline's representative for all work at external maintenance facilities; issue work orders to fully utilize dedicated resources, • Schedule all planned and unplanned work and ensure buses are positioned on time, • Review and approve partner invoices, flag discrepancies, and track overflow technician usage against budget, • Plan and conduct quarterly reviews with key maintenance vendors, • Give the SOC and leadership a real-time view of fleet readiness (operational, in maintenance, or out of service) and communicate constraints proactively, • Own Fleetio and Samsara as key user, including partner access and IT interfaces, • Plan and manage vehicle assignments, identify capacity risks in advance, and support planning for additions, retirements, and configuration, • Maintain vehicle files (registration, insurance, inspections, warranties), • Serve as primary contact with OEM reps; manage warranty claims and authorizations and coordinate technician training, • Track Technical Service Bulletins (TSBs), service bulletins, and recalls and ensure timely action; advise leadership on OEM reliability and procurement, • Provide the SOC advance notice of maintenance windows, report unplanned outages with return-to-service estimates, and collaborate on scheduling trade-offs, • Ensure federal, state, and local compliance and timely inspections; keep audit-ready records and report KPIs (MTBF, out-of-service days, cost per vehicle) What We’re Looking For: • 5-10 years of experience in transportation operations, logistics, aviation, fleet operations, or operations-focused consulting including transportations, or a similar field, • A degree in Industrial Engineering, Operations Research, Supply Chain, a related field or equivalent hands-on experience in a transportation logistics and/or operations environment, • Strong data and analytical skills (Excel required; SQL, Python, or BI tools like Tableau/Power BI a plus), • Comfort using and recommending AI tools (e.g. Claude Code or similar) to move quickly across a diverse and shifting set of projects, • Excellent communication and interpersonal skills with the ability to work with frontline hourly staff, • A high-energy, self-directed approach and enthusiasm for solving operational problems in a fast-moving startup environment, • Familiarity with Fleetio, Samsara, or similar fleet-management/telematics platforms is a strong plus, • Comfort working remotely while collaborating across multiple locations and time zones, • The ability to think "bigger" than any single function as someone who understands the balancing act between commercial, finance, and operations, and can design solutions that serve the whole business rather than optimizing for one group at another's expense, • Six Sigma certification (Green Belt, Black Belt, etc.) is a nice-to-have, • Comfort working remotely while collaborating across multiple locations and time zones Perks & Benefits: • Medical, dental, and vision insurance, • 401(k) plan, • Paid time off, • Flight benefits through our airline partners, • Company-paid life insurance Location: Remote, with up occasional travel to station locations in the USA / Canada. Residents of New York City, Philadelphia, Boston and Toronto are preferred. Schedule: Standard business hours local time Monday – Friday (CST, EST, MST) The Landline Company is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.

Job Description Watch your engineering work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in highly technical buildings and the systems that bring them to life. We are seeking a BIM Technician III - IV to join our team in New York, NY. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. Job Responsibilities As a BIM Technician III - IV, you will setup, draft, convert, produce and edit MEP plans using AutoCAD and REVIT. This role will require excellent organizational skills, the ability communicate effectively and prioritize multiple project deadlines. Additional responsibilities include: • Produce setup drawings/sheets/views consistent with instruction, guidelines, and CAD/BIM standards., • Modify Architectural CAD/BIM files for use in MEP design drawings (clean-up, audit, reference, basic troubleshoot), • Setup new projects, drawings, and models, for use by MEP engineers, prioritize tasks and communicate workflows with design team., • Prepare client submissions: may include plotting and/or creating pdfs or reviewing documents to ensure accurate submissions., • Draft/generate redline plans, diagrams, and schedule drawings in AutoCAD and/or Revit from redline drawings., • Have a strong knowledge of Revit and be able to update 3D models, be proficient with AutoCAD and able to update CAD files., • Assist Project teams with design markups, calculations and on development of projects., • Manage Project file locations, filenames, layers, and symbology per SH Group CAD/BIM standards., • Intermediate project troubleshooting: questions and concerns common within the project team., • Work in coordination with external client CAD/BIM Coordinator for modeling and following CAD/BIM formats, • Manage CAD/BIM coordination on projects specific to CAD/BIM skills (Includes working in coordination with external client CAD/BIM Coordinator for modeling and following CAD/BIM formats) Job Requirements The ideal candidate will have demonstrated proficiency in AutoCAD and MEP tools. You will need effective organizational skills, ability to prioritize workload, and be a team player with strong communication skills. Additional requirements: • High School or completion of trade school or equivalent formal training, • A minimum of 8 years of working experience with an AEC Firm in a CAD/BIM role or 5 years with a MEP firm, • Demonstrated advanced and efficient skills with the latest versions of Revit and MEP workflow, • Demonstrated advanced skills with AutoCAD and MEP tools, • Proficient at working with drawings and understanding of red marks, • Proficient in reading and understanding floor plans, sections and elevations, • Proficient in the latest National CAD/BIM standards, • Experience with manipulating and receiving various file formats, • Extensive work experience with at least one: Mechanical, Electrical, or Plumbing trades, • Experience with MS Office Suite, • Available to work necessary hours to meet project deadlines Benefits At Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to be the best, to advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and the total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: • Robust, comprehensive medical, dental, vision, life insurance and supplemental benefit plans, • 401(k) plan with a generous employer matching program, • Training and professional development courses, • Professional development incentive bonuses, • Dynamic Employee Resource Groups, • Competitive Paid Time Off (PTO) policy, • Transit/parking employer stipend, • ½ day work from home Fridays all year long At Syska, we promote an environment that is committed to embedding diversity and equality into the core of our business and culture. We empower our employees so they can take ownership for their work and development and strive to continually improve themselves and our firm. Syska is a place where you can build an exceptional career and have a lasting impact on the world. Syska Hennessy Group – Creating Exceptional Environments Let's Work Together! The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. New York Pay Range $72,408—$119,474 USD

Job Description Company Description Ancora Engineering + Architecture is a multidisciplinary design firm providing consulting services to the construction industry throughout the New York metropolitan area and across the United States. Our team provides practical, technically sound solutions for complex projects involving demolition, structural design, geotechnical engineering, remediation, alterations, temporary structures, and special inspections. Position Overview Ancora is seeking an experienced CAD Technician III with strong AutoCAD skills and experience preparing technical drawings for construction and engineering projects. The ideal candidate will be detail-oriented, organized, and comfortable working with engineers, architects, contractors, and other project team members. Experience with NYC Department of Buildings requirements and Chapter 33 of the NYC Building Code is strongly preferred. Responsibilities • Prepare and revise detailed 2D AutoCAD drawings for engineering, construction, demolition, structural, and alteration projects., • Develop and maintain accurate construction drawing sets and project documentation., • Incorporate engineer and architect redlines, field measurements, sketches, and review comments., • Assist with drawings related to temporary structures, scaffolding, sidewalk sheds, and other construction conditions as needed., • Conduct occasional site visits to document existing and field conditions., • Coordinate drawings with engineers, architects, contractors, and other project team members., • Prepare drawings for permitting, construction, and as-built documentation., • Maintain drawing libraries, templates, and drafting standards., • Perform quality-control reviews to ensure drawings are accurate, complete, and consistent with project requirements., • Manage multiple projects and deadlines in a fast-paced environment. Qualifications • 5+ years of professional AutoCAD 2D experience in construction, engineering, architecture, or a related field., • Strong ability to produce accurate technical and construction drawings., • Familiarity with NYC Building Code and DOB requirements; knowledge of Chapter 33 is strongly preferred., • Experience with construction, demolition, structural, or architectural drawings., • Experience with temporary structures or construction equipment is a plus., • Strong attention to detail, organization, and time-management skills., • Ability to interpret engineering drawings, architectural plans, field sketches, and technical specifications., • Strong communication and collaboration skills., • Proficiency in Microsoft Office, Adobe Acrobat, and Outlook., • Associate’s or bachelor’s degree in drafting, engineering technology, architecture, or a related field preferred; equivalent experience will be considered. Benefits Ancora offers a competitive salary and benefits package, including 401(K), medical, dental, vision, STD, LTD, life insurance, 401(k) with employer contributions, PTO, paid holidays, and more. Job Type: Full-time Work Location: In person – New York Metropolitan Area Candidates should be within reasonable commuting distance of NYC, as occasional site visits will be required.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking a seasoned Manufacturing Engineer III to join our rapidly growing team. In this role, you will lead the development, validation, and scale-up of advanced manufacturing processes, complex tooling, and specialized equipment required to build and test high-temperature superconducting ("HTS") magnets. As a senior technical contributor, you will play a key role in establishing the frameworks for manufacturing development as we develop and prototype our stellarator systems. Key Responsibility Areas: • Lead the development and standardization of manufacturing documentation for HTS magnets, including complex assembly procedures, work instructions, and rigorous quality inspection criteria., • Own the end-to-end design, procurement, build, and commissioning of custom magnet manufacturing tooling, fixtures, and automated assembly equipment., • Serve as the primary manufacturing liaison to the Magnet Engineering team, driving design for manufacturability, process FMEAs, and iterative design improvements from prototype to production., • Architect and manage manufacturing BOMs, routings, and inventory workflows within PLM and MRP systems to ensure seamless execution., • Author technical specifications, evaluate supplier capabilities, and partner with key vendors to procure high-precision hardware and capital equipment., • Define technician roles, establish training programs, and mentor junior engineers and technical staff., • Track, report, and take ownership of manufacturing milestones, schedule adherence, and budget constraints across primary magnet initiatives. Ideal Experience & Skillsets:, • Bachelor’s degree in Mechanical, Manufacturing, Aerospace, or Electrical Engineering (or related field) with 7+ years of hands-on manufacturing engineering experience., • Extensive experience building complex electro-mechanical assemblies and introducing first-of-a-kind hardware processes into full-scale production., • Proven background in advanced joining and metal fusion processes, including high-precision soldering, brazing, electron beam, or TIG welding., • Demonstrated success scaling low-volume development projects into continuous production environments utilizing PLM, MRP, and ERP software platforms., • Deep expertise in drafting and interpreting engineering drawings with comprehensive Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5., • Experience in magnetic confinement fusion, aerospace, medical devices, defense, or high-reliability advanced manufacturing sectors., • Strong analytical capabilities, proactive leadership, and excellent communication skills., • Ability to occasionally lift objects up to 50 lbs.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Profit sharing, • Vision insurance Client / Engagement: Hudson Tunnel Project Location: New York and New Jersey (On-site) Shift / Schedule: Afternoons/Evenings (Swing Shift) Salary Range: $112,000-197,000 (depending on experience) Employment Type: Full-time Position Summary The Hudson Tunnel Project is the busiest rail connection between New York, New Jersey, and the Northeast Corridor. The project will improve the capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers between Washington, D.C., New York, and New England. Supported by the bipartisan Infrastructure Investment and Jobs Act (IIJA), the project is slated to receive nearly $12 billion in federal funding — the largest investment in a mass transit project in modern history. Jaquith Consulting Group is seeking an experienced Safety Manager to support the Hudson Tunnel Project. The position is responsible for implementing, monitoring, and managing safety across heavy civil construction operations, and for building a safety culture that goes beyond baseline compliance. Key Responsibilities Rail-Specific & On-Track Safety • Implement and enforce Federal Railroad Administration Roadway Worker Protection requirements (49 CFR Part 214) for all work, including on-track safety programs, job briefings, watchman/lookout and flagging protocols, and workers' good-faith challenge rights. Federal Transit Program Compliance & Certification, • Ensure the project safety program satisfies FTA Capital Investment Grant oversight expectations, including support for the Project Management Oversight Contractor's reviews and the project's Safety and Security Management Plan., • Lead or support the Safety and Security Certification process, maintaining the certifiable items list, verification records, and documentation required by the Gateway Development Commission and FTA., • Apply Safety Management System (SMS) principles consistent with FTA's approach, and produce the safety metrics and reporting the federal funding agreement requires. New York / New Jersey Regulatory Compliance, • Ensure compliance with OSHA construction and underground construction standards, which govern the private contractor workforce on both the New York and New Jersey sides., • Meet site safety requirements, including Site Safety Training (SST) card verification for workers and supervisors, and coordinate with the required site safety roles where applicable. Program Safety Leadership & Strategy, • Develop, implement, and continuously improve the project-wide health and safety management system for tunneling and heavy civil operations., • Set standards for a multibillion-dollar program and lead the development of the safety culture for the program., • Review the DB contractor’s submittals, including safety plans, permits, and other documents, for regulatory compliance, and monitor work activities accordingly., • Work with the safety team to develop and report daily on observations, negative and positive, that impact worksite safety. Risk Management & Operational Planning, • Lead task-based risk assessments and job hazard analyses for high-consequence tunneling activities: soft-ground and mixed-face excavation under the Hudson River, tunnel boring machine (TBM) operations, ground support, ventilation, confined space entry, hoisting, and, where used, compressed-air work., • Design error-tolerant controls., • Identify ways to make safe work easier through innovative procedures, better tools, and alternative materials, and champion those with operations leadership. Incident Management & Learning, • Lead incident, near-miss, and high-potential-event investigations., • Track corrective and preventive actions to closure and feed findings back into risk assessments, procedures, and training., • Respond to, report, and investigate incidents on a regular basis, and ensure the process is followed through to completion. Workforce Engagement & Culture, • Deliver or oversee orientations, toolbox talks, and competency-based training for tunneling, heavy civil, and on-track hazards. Team Leadership & Coordination, • Supervise, mentor, and develop project safety professionals, setting clear expectations and supporting their growth., • Coordinate a single standard of care across the contractor, subcontractors, owner representatives, and the operating railroads., • Maintain regular field presence through inspections and audits, adapting the program as work, personnel, and site conditions change. Emergency Preparedness & Resilience, • Develop and drill emergency response, rescue, and evacuation plans specific to underground and confined-space work., • Coordinate emergency planning. Required Qualifications, • Ten (10) years’ experience implementing, monitoring, and managing safety for heavy civil construction programs/projects., • OSHA 30 certification., • Bachelor's degree in Occupational Safety and Health, Engineering, Construction Management, or a related field; equivalent experience may be considered in lieu of degree., • Experience implementing a Behavior-Based Safety (BBS) program across a diverse workforce., • Working knowledge of OSHA construction and general industry standards (29 CFR 1926 and 29 CFR 1910)., • Experience developing and implementing Accident Prevention Plans (APPs) and Activity Hazard Analyses (AHAs) consistent with federal safety standards such as USACE EM 385-1-1, applicable to federally funded construction projects. Preferred Qualifications, • Tunneling experience., • Experience supporting/supervising safety professionals., • Experience in Federal Transit Agency projects., • Relevant degree in Environmental, Health, and/or Safety Science., • Familiarity with transit agencies (such as PANYNJ, NJT, MTA, LIRR, Amtrak)., • Experience delivering programs or portfolios of significant value (>$1 billion) is a significant advantage., • Certified Safety Professional (CSP)., • Certified Industrial Hygienist (CIH)., • OSHA 500 certification., • Proficiency in project management software and tools., • Board of Certified Safety Professionals (BCSP) credential, such as Construction Health and Safety Technician (CHST), Safety Management Specialist (SMS), or Associate Safety Professional (ASP)., • Training in incident investigation methodology (e.g., TapRooT, Latent Cause Analysis, TOP-SET)., • Active Amtrak Roadway Worker Protection (RWP) / ROW card, or completion of Amtrak safety training., • NYC Department of Buildings 40-Hour Site Safety Manager (SSM) license and current Site Safety Training (SST) Supervisor card, or equivalent New Jersey site safety certification., • Completion of USACE EM 385-1-1 40-hour Safety and Health Requirements training, for experience on federally funded construction sites., • Bilingual (English/Spanish), to support communication with a diverse, multi-shift workforce. Working Conditions Travel • Must be able to travel locally and regionally to multiple project sites to perform field visits and monitor construction work in progress., • This is a swing shift (afternoons/evenings) position requiring regular on-site presence during second-shift construction operations, with schedule flexibility to support 24/7 project activity as needed., • This role involves regular site visits to construction sites or other project locations., • May require working outdoors with exposure to varying weather conditions., • Occasional travel for meetings, trainings, and project outreach events will be required at various locations when necessary. Environment, • Must be able to work from an office setting with frequent fieldwork., • Ability to perform in varying weather conditions as required to conduct site visits during all seasons., • Ability to safely navigate construction sites, with responsibility for adhering to differing site safety, security, and PPE requirements. Physical Requirements, • Ability to walk, stand, and safely navigate construction sites for extended periods., • Capability to lift and carry materials or equipment up to a specified weight limit, if necessary., • Responsible for adhering to all instructions regarding differing site conditions, site security, safety protocols, and PPE requirements. Jaquith Consulting Group is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, disability, age, veteran status, or any other protected characteristic.

Job Description A Technician performs the assembly, testing, and verification of advanced fluid‐control components for Aerospace, Nuclear and other applications. This role is ideal for a hands‐on technician who thrives in a precision manufacturing environment and enjoys working with complex electro‐mechanical systems. Key Responsibilities • Perform assembly and performance testing of mechanical and/or electro‐mechanical fluid‐control devices in accordance with engineering procedures, blueprints, and schematics., • Operate, maintain, and help develop high‐pressure test systems, including pneumatic, hydraulic, and calibration‐fluid test stands and pumps., • Conduct electrical testing and verification using a variety of electronic diagnostic tools., • Work within controlled clean‐room environments and conduct particulate analysis with accurate data collection., • Troubleshoot, repair, and validate hardware using systematic diagnostic methods., • Utilize oscilloscopes, and other diagnostic equipment to support testing and analysis., • Maintain a clean, safe, and organized work area., • Lift and move equipment or components up to 50 lbs as needed. Required Skills & Experience • Minimum 5 years of technical or mechanical maintenance experience., • Experience using various hand and measurement tools including but not limited to torque wrenches, height gauges, and calipers., • Ability to read and interpret blueprints, schematics, and technical procedures., • Proven experience assembling and testing electro‐mechanical hardware., • Hands‐on experience with high‐pressure fluid, gas, and cryogenic testing., • Proficiency in electrical testing, including dielectric and insulation‐resistance testing., • Strong computer literacy, including Microsoft Word and Excel., • Experience working in clean‐room environments., • Manufacturing or machining experience is a plus., • Demonstrated ability to troubleshoot and repair hardware using diagnostic tools. Education • Minimum: High School Diploma, • Preferred: Vocational school graduate, Associate Degree or Certificate in Engineering Technology Additional Considerations • Strong team orientation and ability to collaborate across functions., • Capable of working independently with minimal supervision., • Willingness to mentor junior technicians. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Salary Range: $29.00 To $45.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Full-time Description Location: Palm Beach, FL Area Position Type: Full-Time Salary Range: $45,000-$55,000 Annually At Powernet, we don’t just deliver top-tier wireless, voice, Managed IT, and security solutions—we make connecting businesses seamless, smart, and reliable. We’re a team of innovators, problem solvers, and tech enthusiasts who believe work should be rewarding, collaborative, and full of high-fives (virtual or in-person!). If you are eager to launch your IT career, love diving into hands-on technical troubleshooting, and get excited about helping people solve tech puzzles, you’ve found your crowd. • 5 weeks PTO, • Remote work flexibility, • Anniversary gift plan, • Employee referral program, • Health, vision, dental, and life insurance available, • HSA Account, • 401(k) matching As our Entry-Level Help Desk Technician, you are the first line of defense for our technical support operations! You’ll serve as an essential problem solver, taking incoming help desk calls, resolving support tickets, and ensuring our clients have a seamless technology experience. From imaging PCs and setting up user workstations to monitoring system alerts, managing Active Directory permissions, and assisting with installations, you’ll play a key role in keeping our systems and clients running smoothly every day. 1. End-User Support & Day-to-Day Troubleshooting • Answer incoming help desk phones, log detailed ticket notes, and respond to end-user support requests promptly and professionally., • Perform first-level troubleshooting for Microsoft Windows in domain environments, Office 365, Google Workspace, and anti-virus applications., • Manage file/folder permissions, user accounts, and basic configurations within Active Directory and Group Policy. 1. Workstation Setup & Deployment Assistance • Image PCs and configure desktop workstations, laptops, printers, scanners, and copiers for end users., • Assist senior technical teams with technology upgrades, network deployments, and hardware/software implementations., • Provide both remote and periodic on-site assistance to resolve local hardware, cabling, and wiring needs. 1. Alert Monitoring & Systems Hygiene • Actively monitor incoming system alerts, conduct initial research, resolve routine issues, and escalate complex incidents to upper-tier engineering teams when required., • Maintain squeaky-clean records, documenting technical solutions, updating service requests, and keeping configuration logs current., • Participate in a rotational on-call schedule to support critical client needs and maintain strict service level agreements (SLAs). This is a remote-friendly position that may require occasional local travel for on-site hardware deployments, workstation setups, or equipment replacements. You should be comfortable managing multiple activities simultaneously in a fast-paced environment, communicating clearly over the phone and via chat, and maintaining a positive, customer-first attitude. Requirements What You Bring to the Table • Education: High School Diploma or GED required (Associate Degree in Information Technology or a related field preferred)., • Technical Fundamentals: Hands-on familiarity or entry-level experience supporting Microsoft Windows, Active Directory, Group Policy, Office 365, and Google Suite., • Hardware & Infrastructure Awareness: Basic knowledge of PC imaging, workstation setup, cabling/wiring, and anti-virus software (experience with network equipment troubleshooting is a big plus!)., • Problem-Solving Mindset: Strong diagnostic skills with the ability to research, troubleshoot, and document technical issues quickly., • Communication & Service: Outstanding customer service, clear communication, and a passion for helping non-technical users solve problems., • Driver Requirements: Must possess a valid driver’s license for periodic local deployment support. Salary Description $45,000-$55,000 annually

Company Overview: \n MaxSolar is a leading provider of Operations & Maintenance (O&M), Asset Management and Technical Services for solar photovoltaic and battery storage systems in the commercial marketplace. As a comprehensive services provider, MaxSolar supports client needs throughout the entire project life cycle. Our programs ensure that system owners receive the maximum energy, environmental, and financial benefits from their assets. \n \n Position Overview: \n The Solar Technician/Electrician is required to troubleshoot and resolve solar PV and battery storage system issues, including emergency repairs/corrective maintenance, design change requirements, and equipment modifications/upgrades. Position will also be responsible for Preventative Maintenance activities to support system performance of O&M portfolio, as well as, QA/QC inspections, system commissioning and pre-con site assessments. \n \n Responsibilities: \n As a Solar Technician/Electrician within the Operations and Maintenance team, you will play a critical role in ensuring the safe, efficient, and reliable performance of solar energy systems. Key responsibilities include: \n \n\n • Performing routine maintenance, inspections, and system checks on solar equipment to ensure optimal performance.\n, • Operating, maintaining, troubleshooting, and repairing equipment issues identified during inspections or daily operations.\n, • Conducting electrical testing, measurements, and diagnostics to identify and resolve electrical issues.\n, • Utilizing a basic understanding of system monitoring platforms to review and analyze performance data, identify trends, and flag potential concerns.\n, • Preparing formal documentation of all field activities, task procedures, and maintenance actions.\n, • Adhering to all safety protocols, company policies, and industry standards.\n, • Providing technical guidance and support to junior technicians as needed.\n, • Demonstrating strong attention to detail in all aspects of work.\n, • Assisting with QA/QC activities, commissioning of new solar installations, and site assessments.\n, • Managing preventive maintenance tasks and deliverables, including independently performing basic electrical tasks.\n, • Conducting advanced testing and troubleshooting, including work on electrically live devices when required and permitted.\n, • Performing lockout/tagout (LOTO) procedures in accordance with established guidelines and safely releasing systems for troubleshooting.\n, • Executing work instructions for both electrical and mechanical repairs on on-site equipment.\n, • Working within distribution-level systems up to 600 VAC and within PV array limits up to 1000 VDC.\n, • Applying low-voltage test equipment, including conducting pre- and post-use inspections, safely connecting instruments, and interpreting test results.\n\n \n Qualifications: \n\n • Associates Degree in Engineering or equivalent Technical Certification/Training\n, • Licensed Electrician and NABCEP certification preferred.\n, • Valid Driver’s license with clean record.\n, • One (1) year minimum experience installing/maintaining commercial scale battery storage systems preferred.\n, • Ability to work remotely and independently.\n, • Project management/field operations management experience preferred.\n, • Previous experience working with power electronic conversion equipment.\n, • Experience with metering and test equipment.\n, • Experience with centralized DAS/SCADA/EMS control systems.\n, • Working knowledge of Commercial Power Plant Operations.\n, • Ability to read electrical/mechanical drawings, equipment manuals and technical specifications.\n, • Familiarity with CMMS based work order/ticketing systems and mobile reporting tools.\n, • Working knowledge of NEC and local building codes and OSHA safety standards (OSHA 30 preferred).\n, • Ability to efficiently troubleshoot system failures.\n, • Proficient with the use of the Microsoft Office Suite (Word, Excel, PowerPoint, Outlook).\n, • Must be willing and able to climb ladders, stairs and work on rooftops.\n, • Ability to work in extreme weather conditions.\n\n \n Benefits: \n\n • Competitive salary and performance-based incentives\n, • Health, dental, and vision insurance\n, • Retirement savings plan\n, • Opportunities for professional development and career advancement\n