Trabajos engineering technician en New Brunswick, New JerseyCrear alertas

Job Description Service Technician – Direct Residential Thermal Diagnostics, Technical System Maintenance, and Customer Care Job Overview • Company: Uncle Mike's Home Service LLC., • Salary/Pay Rate: $25.00 to $35.00 per hour (Plus Performance Bonuses and Incentive Pay)., • Location: Lincroft, NJ., • Job/Employment Type: Full-Time., • Schedule: Monday to Friday (With weekend availability as needed)., • Mandatory Licences & Certifications: Valid Driver's License and EPA 608 Certification. The Opportunity You will serve as a premier residential specialist, executing critical thermal diagnostics and equipment maintenance across a high-density consumer market. This role provides the operational autonomy to manage your daily dispatch schedule while serving as the authoritative technical consultant for local homeowners. You will directly drive regional client retention and brand trust, backed by a stable firm that combines small-business heart with enterprise benefits. How You Will Make An Impact • Perform advanced physical diagnostics, mechanical repairs, and custom preventative maintenance on residential HVAC units., • Communicate technical malfunctions and structural repair paths clearly to property owners to build absolute trust., • Conduct microscopic component assessments and capture exact airflow, refrigeration, and electrical performance readings., • Execute seasonal technical tune-ups and complex diagnostic service evaluations across diverse heating and cooling configurations., • Catalog comprehensive field service findings, technical recommendations, and part requirements within the corporate database., • Manage, inventory, and secure company-issued testing instrumentation, trade tools, and your assigned service vehicle., • Enforce rigorous environmental safety protocols, handling chemical refrigerants strictly according to regulatory frameworks. Required Qualifications & Experience • Minimum of 3 years of verified field experience specializing in residential HVAC service and mechanical systems., • Active, non-expired EPA 608 Certification necessary to handle and recover regulated consumer refrigerants., • Valid driver’s license maintained in good standing to accommodate responsive residential territory travel., • Proven troubleshooting capabilities with the capacity to isolate intricate electrical and mechanical system failures independently., • Advanced personal communication skills and a meticulous, clean demeanor while operating inside client residences. Preferred Qualifications & Experience • Completed technical degree in HVAC-R technology, mechanical engineering, or a recognized vocational apprenticeship., • Hands-on familiarity with modern high-efficiency heat pumps, ductless mini-split arrays, and smart control interfaces., • Completed safety milestones including an active OSHA 10 card or specialized residential gas safety credentials. Compensation & Benefits • Competitive hourly compensation ranging from $25.00 to $35.00 scaled to residential mechanical troubleshooting mastery., • Robust financial incentives including immediate access to performance bonuses, incentive pay, and corporate referral rewards., • Stable financial infrastructure featuring a dependable weekly pay cycle and a comprehensive retirement savings program., • Elite health protection architecture including premium medical, dental, vision insurance, and a Health Savings Account., • Full group safety allocations covering flexible life insurance policies, disability protection options, and wellness programs., • Substantial paid leave benefits encompassing traditional vacation allotments, observed holidays, sick leave, and parental leave., • Provided corporate service vehicle, commercial gas privileges, complete field uniforms, and required protective safety equipment., • Fully funded technical professional development, ongoing product certifications, and interactive employee reward contests. About Us Uncle Mike's Home Service LLC is a premier residential mechanical contractor specializing in high-performance heating, ventilation, and air conditioning solutions. We maintain a family-oriented workplace culture built upon technical craftsmanship, clear communications, and uncompromised client care. Our leadership treats workforce satisfaction as a central pillar, providing our technicians with modern diagnostic tools, steady year-round hours, and an engaging environment. Uncle Mike's Home Service LLC is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Provide onsite installation and repair of controls systems Experience preferred in the following: • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Microsoft Visio Required skills and strengths: • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed, • Work independently Job Type: Full-time

Job Description A qualified technician typically earns between $75K - $200K. Pay is hourly, plus commission. As an experienced HVAC technician, you will perform maintenance, service, part replacements, & give estimates for repairs. Ability to evaluate customer’s homes for opportunities and inform clients about best options to meet their needs is required. Key attributes for this position include troubleshooting, being a team player, honesty, integrity and doing a great job for our customers. Work Hours: Mon- Fri 8am start time. End time & work hours will vary based upon scheduling needs and seasonal demand including some after hours and weekends. Pay Scale: Ranges between $75K and $200K depending on experience and performance, plus benefits. When you become part of the Bill Leary AC & Heating team, we offer: • Great Benefits - Medical / Dental / Vision Coverage, • Competitive Salary, • Commission – no caps on earning, • Earning Incentives, • Excellent Training Programs, • PTO, • Simple IRA, • Company vehicle, cell phone and iPad for on duty activities, • No out of pocket for fuel. Position Requirements: • HVAC experience, • 5+ years sales experience, • Goal orientated with a strong desire to succeed, • Strong sales skills, • Strong interpersonal & communication, listening skills, • Professional appearance, • Ability to use iPad and smart phone, • Valid driver's license, • Insurable by company insurance carrier, • Mandatory drug testing and background check prior to hire.\nCompany Description Bill Leary Air Conditioning & Heating is a family owned and operated business. The year 2026 marks our 37th year serving Middlesex County and the surrounding areas of Central New Jersey, Monmouth County, Somerset County, and Union County. We provide all levels of residential and commercial heating and air conditioning sales, design, engineering, installation, service, repair, and maintenance. Bill Leary Air Conditioning & Heating is fully insured, bonded, licensed and certified by the State of New Jersey Department of Building and Construction to work on their projects and the New Jersey Economic Development Authority to work on their public schools. We keep up-to-date with the most current codes, laws, and utility rebate procedures. Our firm has been selected and approved by The State of New Jersey Department of Building & Construction to perform work on jobs up to $15,000,000. Our completed and current jobs include: Universities Public Schools Municipal Buildings Police Stations And many other large and small commercial jobs Bill Leary Air Conditioning & Heating is a family owned and operated business. The year 2026 marks our 37th year serving Middlesex County and the surrounding areas of Central New Jersey, Monmouth County, Somerset County, and Union County.\n\nWe provide all levels of residential and commercial heating and air conditioning sales, design, engineering, installation, service, repair, and maintenance.\n\nBill Leary Air Conditioning & Heating is fully insured, bonded, licensed and certified by the State of New Jersey Department of Building and Construction to work on their projects and the New Jersey Economic Development Authority to work on their public schools. \n\nWe keep up-to-date with the most current codes, laws, and utility rebate procedures.\n\nOur firm has been selected and approved by The State of New Jersey Department of Building & Construction to perform work on jobs up to $15,000,000. Our completed and current jobs include:\n\nUniversities\nPublic Schools\nMunicipal Buildings\nPolice Stations\nAnd many other large and small commercial jobs

Job Description Commercial HVAC Technician - Data Centers - High Tech Facilities Hourly Rate - Depends on Experience Well-respected Mechanical Contractor seeks experienced Senior Commercial HVAC Technician to join team. This is a lead role seeking techs with commercial experience! • Experience with Commercial HVAC, Chillers, Boilers, • Ability to supervise, • Factory certifications dealing with Chillers, • Install / Service - HVAC/ Refrigeration / AC / Motors / Heating Units / Pumps / Compressors / Furnaces / Boilers / Burners / Fans / Controls / Split Systems / RTU'S Send your resume to | Chris Coneys at Liberty Personnel Services Chris Coneys www.libertyjobs.com 610 684 8671 Key Words: HVAC, Building Automation, Controls, Field Service Technician, Installation, Maintenance, Service, Commercial systems, Automated Logic, Carrier, Johnson Controls, Trane, Andover Building Automation, BAS, DDC, BAC, BAU, Direct Digital Controls, MRI, LON, LonWorks, BACnet, MODbus, Johnson Controls, Delta Controls, Honeywell, Tridium, Alerton, Building Automation Technician, Building Automation Service, Building Automation Engineer, Staefa, Solidyne, Andover Controls, Siemens, Carrier, Trane, York, ME, Mechanical Engineering, HVAC, HVAC Controls, ASHRAE, Boiler, Boilers, Chillers, RTU’s, Roof Top Units, Split Systems, MEP, Project Engineer, Project Manager, LEED, CEM, CEP, Certified Energy Manager, Certified Energy Professional, ATC, ATC Controls, Automatic Temperature Controls, Invensys, Metasys, Automated Logic, Schneider Electric, TAC, Siemens, Niagara AX, NiagaraAX, Building Automation Graphics, EBI, Symmetre, EMS, BMS, temperature controls #midsenior \nCompany Description Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists. Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Client Overview Our client is a growing consumer products organization dedicated to developing innovative personal care and beauty products. The company is committed to product innovation, quality, and delivering exceptional experiences to consumers through science-driven solutions. They are currently looking to add a Quality Control Technician (Personal Care) to their team. Salary/Hourly Rate $25/hr - $28/hr Position Overview The Quality Control Technician (Personal Care) will support product quality initiatives and ensure compliance with established specifications. This role will be responsible for conducting routine quality testing, product inspections, documentation, and quality system support activities. The ideal candidate is detail-oriented, highly organized, and eager to contribute within a collaborative team environment. Responsibilities Of The Quality Control Technician (Personal Care) • Assess color, odor, appearance, and organoleptic qualities to ensure product consistency., • Perform quality inspections on raw materials, finished goods, and retained samples to ensure adherence to product specifications., • Perform viscosity and pH measurements, density, DSC, melting point, drop test, graph test, fluidity, total solids, and water bath analysis to verify formulation integrity., • Create, maintain, and distribute quality documentation, reports, and forms., • Support quality management system (QMS) activities and quality qualification processes. Required Experience/Skills For The Quality Control Technician (Personal Care) • Minimum of 1 year of experience, preferably in the beauty or consumer packaged goods (CPG) industry., • Experience performing physical and analytical testing on products or materials., • Strong attention to detail and ability to maintain accurate documentation., • Proficiency in Microsoft Excel and other standard business software., • Strong organizational, written, and verbal communication skills., • Ability to work independently while contributing effectively within a small team environment., • Demonstrated willingness to learn new processes and take on additional responsibilities. Preferred Experience/Skills For The Quality Control Technician (Personal Care) • Experience within the personal care, cosmetics, beauty, consumer packaged goods (CPG), chemical, or related manufacturing industries., • Familiarity with Quality Management Systems (QMS)., • Experience supporting product inspections, product releases, and sample management activities., • Understanding of laboratory testing methods related to formulation and product quality evaluation. Education Requirements • Bachelor's degree in Chemistry, Biology, Cosmetic Science, Chemical Engineering, Food Science, or another related scientific discipline is required. Benefits • Atrium Care Package available, upon eligibility (including healthcare plans, discount programs, and paid time off).

EVONA is partnering with an RF and microwave hardware manufacturer supporting defense, aerospace, unmanned systems, and space applications. We’re seeking a Senior Engineering Technician to support new product development through hands-on RF testing, evaluation, and troubleshooting. You’ll work alongside engineers to verify amplifier performance, support prototype builds, and develop repeatable test procedures. What you’ll do • Set up and operate network analyzers, spectrum analyzers, signal generators, and RF power meters., • Test new RF amplifiers and circuits, verifying performance against engineering requirements., • Support microwave tuning, using measurements to guide circuit adjustments., • Investigate component and test issues, escalating complex problems to engineers., • Support prototype circuit builds, engineering test fixtures, and RF transistor characterization., • Create and maintain test procedures, documentation, and results within the quality management system., • Collaborate with engineering, assembly, and production teams to resolve issues and meet delivery deadlines. Required experience and skills • Three or more years of relevant electronics or RF testing experience., • Hands-on experience operating RF test and measurement equipment., • Experience working in a production or hardware design environment., • Practical understanding of electronics, AC circuits, and RF measurements., • Ability to follow test procedures, interpret results, and clearly communicate technical issues., • Strong attention to detail and the ability to prioritize work in a fast-paced environment., • Availability to work onsite in East Brunswick, NJ, five days per week. Preferred experience • Testing RF power amplifiers or similar circuits., • Microwave tuning and circuit adjustment experience—training can be provided., • Component-level troubleshooting and prototype development., • Understanding of amplifier architecture and measurements such as error vector magnitude (EVM), signal-to-noise ratio (SNR), and third-order intercept point (IP3)., • Familiarity with Altium., • An associate’s or bachelor’s degree in Electrical, Electronics, Computer Engineering, or a related field. Relevant practical knowledge is valued over degree background. Benefits • Paid holidays, vacation, and personal/sick time., • Medical, dental, vision, and life insurance options., • Employee assistance program and a $4,000 Health Reimbursement Arrangement., • 401(k) with company match. Visa or sponsorship requirements will be evaluated by the employer on a case-by-case basis.

Job Description Job Description Date 10/2025 Location 1200 Airport Road, North Brunswick NJ Title Technician, R&D Formulation Department Research & Development Reports to Director, Research & Development FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Formulation Technician is responsible for supporting the formulation and manufacturing processes by accurately weighing, mixing, and processing raw materials in accordance with Standard Operating Procedures (SOPs), Good Manufacturing Practices (cGMP), and batch documentation requirements. This role involves hands-on operation and maintenance of various pharmaceutical production equipment and requires close adherence to quality, safety, and regulatory standards. Areas of Responsibility Technician, R&D -Level 1, Works under close supervision; learns formulation procedures, documentation, and equipment operation. Technician, R&D -Level 2 Works independently on complex formulation and scale-up activities; may train junior staff Technician, R&D -Level 3 Operates with minimal supervision; recognized technical expert and mentor within the R&D team. Develops and updates SOPs, batch records, and training materials. Oversees equipment readiness, preventive maintenance, and calibrations. Mentors’ technicians and ensures high-quality documentation and compliance. Supports technology transfer and production readiness reviews Key Responsibilities Level 1, 2 & 3 • Accurately weigh and transfer raw materials using calibrated balances and scales in accordance with approved batch records and formulation guidelines., • Perform formulation and manufacturing activities for pilot, scale-up, and commercial batch production., • Operate equipment for mixing, blending, granulation, and other material processing functions in support of pharmaceutical product development and manufacturing., • Complete and maintain accurate, compliant, and timely documentation, including Batch Manufacturing Records (BMRs), Logbooks, Protocols, and related forms in accordance with cGMP and SOP requirements., • Assist in the development and optimization of formulations for various dosage forms such as tablets, capsules, and granules, under the direction of senior formulation scientists or supervisors., • Independently execute and monitor benchtop, pilot-scale, and manufacturing scale-up batches with minimal supervision., • Set up, operate, clean, and perform changeovers on R&D and pilot-scale manufacturing equipment, including but not limited to:, • Tablet Presses, • Capsule Filling Machines, • Coating Machines, • Granulators, • Fluid Bed Dryers (FBDs), • Ensure equipment is properly maintained, sanitized, and operated in compliance with SOPs, safety protocols, and current Good Manufacturing Practices (cGMP)., • Proactively identify and troubleshoot issues during formulation development, demonstrating strong problem-solving skills and an ability to anticipate potential risks or failures., • Adhere strictly to all company policies, safety guidelines, and regulatory requirements., • Participate in routine housekeeping, equipment cleaning, and 5S/continuous improvement initiatives to maintain a safe and efficient working environment., • Perform additional duties and responsibilities as assigned by management to support departmental and organizational goals. Requirements Education & Qualification: Technician, R&D -1 • Requires High School diploma or GED, Associate degree preferred., • 1 to 4 years of experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes will be a plus. Technician, R&D -2 • Requires High School diploma or GED, Associate degree preferred., • 6 to 10 years’ experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes. Technician, R&D -3 • Associate’s or Bachelor’s degree in Chemistry, Biology, Engineering, or related scientific field, • 3 to 12 years’ experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes. Certifications, Licenses, Credentials: • N/A Skills & Ability • Requires hands-on experience or knowledge to set-up & operate Tablet, Capsule, Granulation manufacturing process equipment such as Tablet Press, Capsule Filling, Coating, Granulator, Fluid Bed Dryers, etc. and the ability to troubleshoot this equipment., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for issues such as sticking, picking, capping, chipping, compressibility, delamination, etc., • Works independently or in a team assisting others., • Performs basic math calculations and follow written instructions with accuracy and pay attention to detail., • Able to follow and understand cGMP, OSHA standards etc., • Able to distinguish different shades of colors., • Intermediate user of MS Office, Excel, Word, and Outlook, • Complies with all regulatory/ in-house requirements (may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP’s, GLP, documentation) when performing the assigned activity., • Demonstrates above average written communication skills in the English language to follow the industry regulated instruction sheets. Physical Requirements (lifting, etc.): • The employee is frequently required to sit (50%), stand, and walk (50%) at a lab bench., • Able to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Able to stand and walk on the production floor a minimum of 6 hours per shift., • Uses hands to finger, handle or feel, or to operate or to control objects. Able to lift up to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Able to occasionally work on a rolling ladder or step stool, or to lean over equipment as well as kneeling on the floor to clean under the equipment., • Able to wear all PPE including lab coat, face mask, booties, gloves, safety glasses/goggles and respirator. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a laboratory environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents., • Occasionally walks through warehouse or manufacturing workplace and will be required to wear appropriate PPE for each work area. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an “at will” relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation 9:00 am to 5:30 PM

Job Description Princeton NuEnergy (PNE) is excited to announce future opportunities to join our innovative Research & Development team, focused on pioneering advancements in the direct recycling and upcycling of spent Lithium-ion battery materials. Our mission is to deliver a cost-efficient, environmentally friendly solution to the current industry pain points of high operational costs and low efficiency in battery recycling. We aim to solve these challenges by improving battery recycling efficiency and purity, thereby revolutionizing the lithium-ion battery recycling landscape. About Us: PNE is a lithium-ion battery direct recycling and critical materials recovery innovator, founded out of Princeton University. At its core, PNE's patented recycling technology is based on a low-temperature plasma-assisted separation process (LPAS™) that does not damage but, rather, reclaims and repairs cathode material from spent lithium-ion batteries and manufacturing scrap at half the cost with significantly lower waste when compared with existing traditional recycling processes. Our state-of-the-art laboratory is located in Princeton, New Jersey, where we are dedicated to pushing the boundaries of sustainable energy technologies. We are building a team of passionate and talented individuals to drive forward our cutting-edge research initiatives. Potential Roles: We anticipate openings for the following positions in the near future: • Research Scientist, • Process Engineer, • Technician Ideal Candidates: We welcome applications from candidates with expertise in: • Battery cathode material synthesis and related research experience., • Plasma physics, particularly in device development and experimental applications., • Chemical Engineering (with a focus on inorganic chemistry), Materials Science & Engineering, Chemistry, or related areas of study. If you are passionate about sustainability, innovation, and advancing the future of energy storage, we would love to hear from you! Princeton NuEnergy, Inc. is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, gender, sexual orientation, gender identity or expression, religion, national origin, marital status, age, disability, veteran status, genetic information, or any other protected status under federal, state, and local laws.

Job Description The Quality Assurance Technician I is responsible to test and ensure that goods meet manufacturing standards and are free of defects. Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products. The Quality Assurance Technician is expected to: • Maintain SPC limit at or above the corporate target. · Complete in process inspections in 2 hours or less · Complete raw material in coming inspections in 25 days or less · Performs in process inspections. · Performs raw material incoming inspection and movements through ERP system. · Assists with First Piece / First Article, incoming processed material, and final inspections. · Assists in engineering capability studies. · Assists in gage repeatability and reproducibility studies. · Records test data, applying statistical quality control procedures. · Completes incoming inspection documentation • Provides communication to Calibration Technicians of any additions, deletions, or changes to the process gages and equipment · Manages storage of samples and records. · Interprets engineering drawings, schematic diagrams, and / or work instructions. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is required. · 1-2 years of quality experience or equivalent combination of education and experience is required. · Previous experience working in a manufacturing environment is strongly preferred. LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · Automated Inspection Equipment · ERP software · MS Office Suite OTHER SKILLS · SPC · Manual dexterity · Spatial dexterity · Verbal communication · Written communication · Organizational skills · Interpersonal skills · Multitasking While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must frequently lift, push, pull, carry and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment is usually moderate.

Job Description Job Title: Chemical Technician 1st Shift Job Description The Chemical Technician 1st Shift plays a key role in ensuring product quality and laboratory safety by performing chemical testing, maintaining adherence to ISO 9001 standards, and supporting quality control processes across raw materials and finished products. This position actively participates in safety initiatives, manages product and customer specifications within the quality management system, and helps resolve quality and process issues between the laboratory and production. Responsibilities • Prepare safety topics and lead weekly safety meetings to promote a strong safety culture in the laboratory., • Ensure the quality of products and maintain strict adherence to ISO 9001 standards in all testing and documentation activities., • Perform chemical testing and cover any area of testing required in the lab when needed or requested., • Monitor sample status in the QC database and close and release product test results in a timely and accurate manner., • Identify personnel-related issues within the lab, communicate them appropriately, and recommend resolutions to leadership., • Identify, communicate, and retrain team members to address errors made by both the lab and production, such as missing labels on sample cups, incorrect product or customer information on sample labels, missing test results, or erroneous data., • Recommend and support corrective actions to prevent recurring errors in sampling, testing, and data recording processes., • Enter all new customer and product specifications into the quality management system and maintain accurate, up-to-date specifications., • Validate Certificates of Analysis (C of A) first released from the quality management system and ensure that correct specifications are in place., • Initiate specification requests when no existing specifications are available for a product or customer., • Monitor raw materials in quality inspection, perform necessary testing, and release materials in a timely manner., • Resolve raw material specification issues by coordinating with appropriate stakeholders and ensuring compliance with quality requirements., • Collaborate with production and other departments to support blending and related processes through accurate testing and specification management., • Maintain accurate records and documentation for all testing, inspections, and specification changes in accordance with GMP and quality procedures. Essential Skills • Experience working in a GMP (Good Manufacturing Practice) environment and following established quality and documentation procedures., • Hands-on experience with chemical testing in a laboratory setting., • Strong knowledge of wet chemistry techniques and raw material testing methods., • Ability to work with and maintain data in a QC database and quality management system., • Attention to detail in labeling samples, recording test results, and validating specifications., • Ability to identify errors and inconsistencies in test data, sample information, and specifications and take corrective action., • Strong communication skills to clearly convey safety topics, quality issues, and corrective actions to team members., • Capability to lead and chair weekly safety meetings and promote safe work practices. Additional Skills & Qualifications • Familiarity with ISO 9001 quality standards and their application in a laboratory and production environment., • Ability to manage and update customer and product specifications within a quality management system., • Experience validating Certificates of Analysis (C of A) against established specifications., • Problem-solving skills to resolve raw material specification issues and support continuous improvement., • Ability to collaborate effectively with laboratory and production teams to ensure accurate testing and blending processes. Work Environment This is a 1st shift position with working hours from 6:00 a.m. to 2:30 p.m. The role is based in a laboratory and production support environment that emphasizes safety, GMP compliance, and adherence to ISO 9001 standards. Work involves routine chemical testing, wet chemistry procedures, and interaction with a QC database and quality management systems. The environment is structured and process-driven, with regular safety meetings and close collaboration between quality, lab, and production teams. If you are looking for 2nd or 3rd shift we do have openings there too! If interested and qualified please book a virtual meeting with me here: https://talentassistant.actalentservices.com/assistant/bookings/bgF9HVktJob Type & Location This is a Contract to Hire position based out of South Plainfield, NJ. Pay and Benefits The pay range for this position is $24.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Oct 16, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Chemical Technician 1st Shift/2nd Shift/3rd Shift Job Description The Chemical Technician 1st Shift plays a key role in ensuring product quality and laboratory safety by performing chemical testing, maintaining adherence to ISO 9001 standards, and supporting quality control processes across raw materials and finished products. This position actively participates in safety initiatives, manages product and customer specifications within the quality management system, and helps resolve quality and process issues between the laboratory and production. Responsibilities • Prepare safety topics and lead weekly safety meetings to promote a strong safety culture in the laboratory., • Ensure the quality of products and maintain strict adherence to ISO 9001 standards in all testing and documentation activities., • Perform chemical testing and cover any area of testing required in the lab when needed or requested., • Monitor sample status in the QC database and close and release product test results in a timely and accurate manner., • Identify personnel-related issues within the lab, communicate them appropriately, and recommend resolutions to leadership., • Identify, communicate, and retrain team members to address errors made by both the lab and production, such as missing labels on sample cups, incorrect product or customer information on sample labels, missing test results, or erroneous data., • Recommend and support corrective actions to prevent recurring errors in sampling, testing, and data recording processes., • Enter all new customer and product specifications into the quality management system and maintain accurate, up-to-date specifications., • Validate Certificates of Analysis (C of A) first released from the quality management system and ensure that correct specifications are in place., • Initiate specification requests when no existing specifications are available for a product or customer., • Monitor raw materials in quality inspection, perform necessary testing, and release materials in a timely manner., • Resolve raw material specification issues by coordinating with appropriate stakeholders and ensuring compliance with quality requirements., • Collaborate with production and other departments to support blending and related processes through accurate testing and specification management., • Maintain accurate records and documentation for all testing, inspections, and specification changes in accordance with GMP and quality procedures. Essential Skills • Experience working in a GMP (Good Manufacturing Practice) environment and following established quality and documentation procedures., • Hands-on experience with chemical testing in a laboratory setting., • Strong knowledge of wet chemistry techniques and raw material testing methods., • Ability to work with and maintain data in a QC database and quality management system., • Attention to detail in labeling samples, recording test results, and validating specifications., • Ability to identify errors and inconsistencies in test data, sample information, and specifications and take corrective action., • Strong communication skills to clearly convey safety topics, quality issues, and corrective actions to team members., • Capability to lead and chair weekly safety meetings and promote safe work practices. Additional Skills & Qualifications • Familiarity with ISO 9001 quality standards and their application in a laboratory and production environment., • Ability to manage and update customer and product specifications within a quality management system., • Experience validating Certificates of Analysis (C of A) against established specifications., • Problem-solving skills to resolve raw material specification issues and support continuous improvement., • Ability to collaborate effectively with laboratory and production teams to ensure accurate testing and blending processes. Work Environment This is a 1st shift position with working hours from 6:00 a.m. to 2:30 p.m. The role is based in a laboratory and production support environment that emphasizes safety, GMP compliance, and adherence to ISO 9001 standards. Work involves routine chemical testing, wet chemistry procedures, and interaction with a QC database and quality management systems. The environment is structured and process-driven, with regular safety meetings and close collaboration between quality, lab, and production teams. If you are looking for 2nd or 3rd shift we do have openings there too! If interested and qualified please book a virtual meeting with me here: https://talentassistant.actalentservices.com/assistant/bookings/aOjUnKc_ Job Type & Location This is a Contract to Hire position based out of South Plainfield, NJ. Pay and Benefits The pay range for this position is $24.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Oct 13, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Chemical Technician 3rd Shift Job Description This role supports a fast-paced quality control laboratory on the 3rd shift, ensuring that products meet strict quality standards and comply with ISO 9001 and GMP requirements. The chemical technician performs a wide range of testing activities, maintains accurate quality records, and helps drive continuous improvement in both laboratory and production processes. Responsibilities • Prepare safety topics and lead weekly safety meetings to promote a strong safety culture within the laboratory., • Ensure product quality and adherence to ISO 9001 standards by performing and reviewing required laboratory tests., • Perform any area of testing required in the laboratory when requested or as operational needs arise., • Monitor sample status in the quality control database and close and release product results in a timely and accurate manner., • Identify, communicate, and recommend resolutions for personnel-related issues to the appropriate manager., • Identify errors made by laboratory or production teams, such as missing labels on sample cups, incorrect product or customer information on sample labels, missing test results, or erroneous data, and communicate, retrain, and recommend corrective actions to prevent recurrence., • Enter all new customer and product specifications into the quality management system and maintain current specifications to ensure data accuracy., • Validate certificates of analysis (C of A) when they are first released from the quality management system and confirm that correct specifications are in place., • Initiate specification requests when no specifications are available to ensure products are tested against appropriate criteria., • Monitor raw materials in quality inspection and release them in a timely manner once they meet specifications., • Resolve raw material specification issues in collaboration with relevant teams, including blending and production, to ensure consistent product quality. Essential Skills • Demonstrated experience working under Good Manufacturing Practice (GMP) guidelines., • Hands-on experience with chemical testing in a laboratory environment., • Knowledge of wet chemistry techniques and raw material testing., • Ability to work effectively on a fixed 3rd shift schedule from 10:00 p.m. to 6:30 a.m., • Strong attention to detail for accurate data entry and review in quality management and QC database systems., • Ability to identify errors and implement corrective and preventive actions in both laboratory and production settings., • Effective communication skills to lead safety meetings and collaborate with cross-functional teams.Job Type & Location This is a Contract to Hire position based out of Dunellen, NJ. Pay and Benefits The pay range for this position is $24.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Dunellen,NJ. Application Deadline This position is anticipated to close on Oct 5, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Chemical Technician 1st Shift Job Description The Chemical Technician 1st Shift plays a key role in ensuring product quality and laboratory safety by performing chemical testing, maintaining adherence to ISO 9001 standards, and supporting quality control processes across raw materials and finished products. This position actively participates in safety initiatives, manages product and customer specifications within the quality management system, and helps resolve quality and process issues between the laboratory and production. Responsibilities • Prepare safety topics and lead weekly safety meetings to promote a strong safety culture in the laboratory., • Ensure the quality of products and maintain strict adherence to ISO 9001 standards in all testing and documentation activities., • Perform chemical testing and cover any area of testing required in the lab when needed or requested., • Monitor sample status in the QC database and close and release product test results in a timely and accurate manner., • Identify personnel-related issues within the lab, communicate them appropriately, and recommend resolutions to leadership., • Identify, communicate, and retrain team members to address errors made by both the lab and production, such as missing labels on sample cups, incorrect product or customer information on sample labels, missing test results, or erroneous data., • Recommend and support corrective actions to prevent recurring errors in sampling, testing, and data recording processes., • Enter all new customer and product specifications into the quality management system and maintain accurate, up-to-date specifications., • Validate Certificates of Analysis (C of A) first released from the quality management system and ensure that correct specifications are in place., • Initiate specification requests when no existing specifications are available for a product or customer., • Monitor raw materials in quality inspection, perform necessary testing, and release materials in a timely manner., • Resolve raw material specification issues by coordinating with appropriate stakeholders and ensuring compliance with quality requirements., • Collaborate with production and other departments to support blending and related processes through accurate testing and specification management., • Maintain accurate records and documentation for all testing, inspections, and specification changes in accordance with GMP and quality procedures. Essential Skills • Experience working in a GMP (Good Manufacturing Practice) environment and following established quality and documentation procedures., • Hands-on experience with chemical testing in a laboratory setting., • Strong knowledge of wet chemistry techniques and raw material testing methods., • Ability to work with and maintain data in a QC database and quality management system., • Attention to detail in labeling samples, recording test results, and validating specifications., • Ability to identify errors and inconsistencies in test data, sample information, and specifications and take corrective action., • Strong communication skills to clearly convey safety topics, quality issues, and corrective actions to team members., • Capability to lead and chair weekly safety meetings and promote safe work practices. Additional Skills & Qualifications • Familiarity with ISO 9001 quality standards and their application in a laboratory and production environment., • Ability to manage and update customer and product specifications within a quality management system., • Experience validating Certificates of Analysis (C of A) against established specifications., • Problem-solving skills to resolve raw material specification issues and support continuous improvement., • Ability to collaborate effectively with laboratory and production teams to ensure accurate testing and blending processes. Work Environment This is a 1st shift position with working hours from 6:00 a.m. to 2:30 p.m. The role is based in a laboratory and production support environment that emphasizes safety, GMP compliance, and adherence to ISO 9001 standards. Work involves routine chemical testing, wet chemistry procedures, and interaction with a QC database and quality management systems. The environment is structured and process-driven, with regular safety meetings and close collaboration between quality, lab, and production teams. If you are looking for 2nd or 3rd shift we do have openings there too! If interested and qualified please book a virtual meeting with me here: https://talentassistant.actalentservices.com/assistant/bookings/aOjUnKc_ Job Type & Location This is a Contract to Hire position based out of South Plainfield, NJ. Pay and Benefits The pay range for this position is $24.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Oct 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. To learn more about our unique culture, visit our culture page. HORIBA is a global group of companies that develops, manufactures and provides an extensive array of analytical and measurement equipment to countries around the world. HORIBA Instruments Inc., a leading manufacturer of scientific instruments has an immediate opening for a CCD Lab Technician in the Piscataway, New Jersey facility. Duties/Requirements: • Soldering skills, the ability to read mechanical and electrical drawings and schematics are a must, • Hands-on mechanical skills and familiarity with electronic test equipment such as meters and oscilloscopes., • Two – Four-year degree related to mechanical or electrical engineering and or related work experience. Compensation Package: HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please call (732)494-8660 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job Description INJECTION MOLDING TECHNICIAN We are seeking an experienced Injection Molding Technician with a strong background in plastic injection molds, machining, mold repair, and modification. This is an excellent opportunity with an established company offering excellent benefits, long-term stability, and an opportunity for a career through retirement. Key Responsibilities & Qualifications ☐ Hands-on experience with plastic injection molding machines ☐ Experience repairing, adjusting, modifying, and designing injection molds ☐ Strong background in injection mold making and maintenance ☐ Ability to troubleshoot and repair plastic injection molds ☐ General machine shop experience, including milling and related machining equipment ☐ CNC machining experience strongly preferred ☐ Manual machining experience desired ☐ Ability to read and understand blueprints, engineering drawings, schematics, and specifications ☐ Strong mechanical troubleshooting and problem-solving skills ☐ Ability to work independently and maintain high-quality standards ☐ Tool & Diemaker welcomed Ideal Candidate The ideal candidate will have a strong general machining background, including milling and CNC machining, combined with hands-on experience working with plastic injection molds. We are particularly interested in candidates who have experience designing, repairing, modifying, maintaining, and troubleshooting injection molds and who can bring a strong machine-shop skill set to the position. Long-Term Opportunity This is an established company with excellent benefits and a strong commitment to its employees. We are looking for someone who wants more than just another job—someone interested in long-term employment and the opportunity to build a career with a company through retirement. If you have the injection molding, mold-making, repair, and machining expertise we are looking for, please submit your resume through this platform. We will review your qualifications and contact you regarding the opportunity. \nCompany Description · Stable company with long-term career opportunities · Competitive compensation · Overtime opportunities (when available) · Excellent work environment · Benefits package (where applicable) · Stable company with long-term career opportunities\r\n· Competitive compensation\r\n· Overtime opportunities (when available)\r\n· Excellent work environment\r\n· Benefits package (where applicable)

Job Description DEPARTMENT: Tool Room REPORTS TO: Molding Department POSITION DESCRIPTION: The Tool Room Technician produces effective mold and die repairs through the following: fitting components into molds; finishing new products, components, or inserts; assembling pieces when complete; as well as documenting mold repair procedures in IQMS. RESPONSIBILITIES: • Support the Tool Room Supervisor in the process of setup, testing, procedures, training, and updating of IQMS relative to tooling and operations., • Perform accurate, safe and correct setups prior to commencement of operation., • At point of startup, assure no flash, water leaks and other potential issues. Address any known previous problems or issues. Properly test for water leaks and test electrical for any issues., • Comply with the established standardization of mold setup and teardown procedures. Apply learned best practices., • Select, align and secure fixtures, cutting tools, attachments accessories and materials on machines, • Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls as required., • Verifies conformance of finished work piece to specs., • Fits and assembles parts into complete assembly., • Verifies dimensions and alignment of assembly., • Perform work within the Tooling Preventive Maintenance program including but not limited to in-mold closings, hoses and water fittings. Utilize IQMS/Kanban to maintain processing related to equipment., • Change non-production molds in advance as needed., • Follow proper procedures including lock-out / tag-out, mold maintenance sheets and others., • Maintain consistent and effective component cleaning and storage., • Maintain liner dies needed for production., • Support OEE/SEE metrics and related goals of cycle attainment, zero-block cavitation, mold set-up compliance, and changeovers to maximize mold efficiency., • Follow the escalation process for tool issues by consistently and openly sharing information with the Tool Room Manager., • Document, standardize and create procedures for repeatability, predictability and improved efficiency specific to related activities., • Perform data entry on shop floor as needed., • Collaborate with Engineering to enable effective vendor sourcing., • Participate in internal machining projects., • Actively participate in tool teardown meetings., • Participate in shift hand-off activity to ensure a smooth shift transition., • Other duties as assigned. RESPONSIBILITIES: • Safety Responsibilities:, • Supports a culture where employees address unsafe conditions and behaviors, make suggestions for improvements, and actively participates in implementing solutions, • Identifies safety gaps and self-initiates corrective actions, • Strictly adheres to plant safety, housekeeping, and 5S efforts, • Understands, identifies, and corrects safety hazards, • Drives a culture which empowers employees to understand and embrace what they own, • Food Safety Responsibilities:, • Monitors and verifies activities to ensure that finished goods and raw materials are coming in and out of the facility meet consumer safety and quality standards., • Complies with all company food safety and quality assurance procedures, • Reports any product or process failures that could impact food safety of manufactured products to the location’s Food Safety Team Leader and submits an appropriate incident report PHYSICAL REQUIRMENTS: While performing the duties, the employee will be required to sit and/or stand, talk or hear, both in person and by telephone; use hands, fingers and arms to feel objects or controls, reach with hands and arms. Prolonged standing/walking periods of 12 hours. May be required to stoop, kneel, bend, crouch and lift to 50 pounds. RESPONSIBILITIES: • Safety Responsibilities:, • Supports a culture where employees address unsafe conditions and behaviors, make suggestions for improvements, and actively participates in implementing solutions, • Identifies safety gaps and self-initiates corrective actions, • Strictly adheres to plant safety, housekeeping, and 5S efforts, • Understands, identifies, and corrects safety hazards, • Drives a culture which empowers employees to understand and embrace what they own, • Food Safety Responsibilities:, • Monitors and verifies activities to ensure that finished goods and raw materials are coming in and out of the facility meet consumer safety and quality standards., • Complies with all company food safety and quality assurance procedures, • Reports any product or process failures that could impact food safety of manufactured products to the location’s Food Safety Team Leader and submits an appropriate incident report About MRP: MRP Solutions (MRP), a plastic cap manufacturer, is a leading provider of high-quality, injection molded plastic closures, jars and packaging components used every day by millions of consumers around the globe. But we offer more than just plastic caps and lids – we deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. MRP Solutions combines extensive packaging expertise with a consultative approach to reliably uncover customer needs. By understanding your business goals, we can tailor smarter, safer, and more flexible packaging solutions that reduce cost and increase speed to market, helping your businesses capitalize on opportunity. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. We are passionate about partnering with distributors and manufacturers who understand that plastic caps and lids are a small but important part of how people experience their brands. Together, we deliver packaging with purpose. Our Vision: We deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. Our Values & Beliefs • Integrity – We have the courage to act with the highest level of integrity, even when no one is watching. We do what is right 100% of the time., • Value Creation – The sole reason a company exists is to create real long-term value for society. This starts with ensuring human safety, as value cannot be created without first protecting human life. We seek opportunities for mutual benefit with all of our stakeholders, including customers, employees, shareholders, suppliers, and the communities in which we operate. In everything we do, our overarching goal is to deliver superior results.., • Accountability - We are accountable to each other and to our stakeholders. We say what we do and do what we say. We embrace a culture of ownership, empowering and equipping employees with the ability to own their outcomes., • Entrepreneurial - Everyone thinks and acts like owners, employing good economic and critical thinking skills while adopting the risk profile of our shareholders. We are inquisitive, constantly seeking out opportunities to improve, actively searching for and innovating across each and every aspect of our business. We relentlessly strive to understand and profitably anticipate what our customers need and value, because if our customers do not grow, we do not grow., • Respectful and Friendly – Everyone deserves to be treated with respect and dignity. Because everyone's perspective has value, we embrace diversity of thought, background and experiences. We are friendly and lead with a smile. What we do is important, but how we do it is what makes it impactful., • Change - We actively seek out and embrace change wherever profitable. Because society is constantly identifying and employing new and better ways of accomplishing tasks, we must constantly innovate, reinvent and, ultimately, destroy the old ways of doing business. We actively engage in rigorous debate and embrace challenge to ensure we stay relevant and deliver superior results., • Fulfillment – Our employees are the foundation of our success. We foster an environment enabling our employees to learn, grow and accept more accountability as they demonstrate capability. We promote more than just individual connection as community at work brings people together through common interest, objectives or experiences. MRP Solutions is an equal opportunity and affirmative action employer. We do not discriminate in recruiting, hiring or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, medical condition, marital or protected veteran status or any other basis or characteristic prohibited by applicable federal, state, or local law. Consistent with the obligations of state and federal law, MRP Solutions will make reasonable accommodation for qualified individuals with disabilities. Any employee who needs reasonable accommodation should contact Human Resources. #INDS

Job Description Job Description The Manufacturing Technician on the PM shift performs testing, troubleshooting, and validation of complex electromechanical manufacturing equipment and subsystems used in advanced semiconductor and AI-related applications. This role focuses on executing pre-test checks, acceptance testing, and final system verification prior to customer release, while working closely with Engineering, R&D, and Assembly teams to resolve technical issues and improve testing processes. The position offers hands-on exposure to sophisticated vacuum, cryogenic, high-power, and electromechanical systems, with significant technical training and a clear contract-to-hire path. Responsibilities • Perform testing, troubleshooting, and validation of complex electromechanical manufacturing equipment and subsystems to ensure they meet performance and quality standards., • Execute pre-test checks, acceptance tests, and final system verification prior to customer release, following established procedures and work instructions., • Troubleshoot equipment failures, identify root causes, and support corrective actions in partnership with Manufacturing Engineering, R&D, and Assembly teams., • Install, remove, and configure components within test systems using hand tools and mechanical assemblies, ensuring proper fit, function, and safety., • Operate proprietary testing software and computerized test systems to support manufacturing operations and equipment validation., • Read and interpret engineering drawings, blueprints, bills of material (BOMs), schematics, and detailed work instructions to guide assembly, testing, and troubleshooting activities., • Analyze test data, document results, and maintain accurate manufacturing test records in accordance with internal procedures and quality requirements., • Utilize precision measurement and troubleshooting tools, including calipers, multimeters, and related inspection equipment, to verify equipment performance and diagnose issues., • Support testing and operation of vacuum, power supply, pump, and electromechanical systems used in advanced semiconductor manufacturing equipment., • Participate in cross-training across multiple manufacturing and test stations to build versatility and support production needs., • Collaborate directly with Manufacturing Engineering, R&D, and Assembly teams to resolve technical issues, share findings, and improve testing processes., • Support continuous improvement efforts by identifying recurring issues, recommending process improvements, and assisting in corrective action implementation., • Contribute to statistical data analysis activities related to equipment performance and test results when applicable., • Work on equipment, machinery, and test systems rather than solely on finished products, ensuring systems are properly configured and ready for production use. Essential Skills • At least 2 years of hands-on experience as a manufacturing, test, equipment, electromechanical, or maintenance technician working directly on equipment, machinery, or test systems., • Demonstrated experience testing and troubleshooting equipment, not just operating machinery, including identifying problems and verifying corrective actions., • Strong mechanical aptitude and comfort working on complex electromechanical systems and assemblies.Job Type & Location This is a Contract to Hire position based out of Somerset, NJ. Pay and Benefits The pay range for this position is $27.00 - $29.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Somerset,NJ. Application Deadline This position is anticipated to close on Oct 15, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. Position Summary: We are seeking a skilled and dependable Setup Technician to support our precision metal stamping operations in Piscataway, New Jersey. Our manufacturing facility produces close-tolerance metal components for highly regulated medical device and aerospace applications. The Setup Technician is responsible for preparing, installing, adjusting, troubleshooting, and operating stamping presses, tooling, and auxiliary equipment. This position ensures that each production job is set up safely and efficiently in accordance with approved work instructions, engineering drawings, quality requirements, and customer specifications. The ideal candidate will have hands-on experience setting up progressive, compound, and secondary-operation dies; operating coil-fed press equipment; performing dimensional inspections; and resolving production issues. This role requires strong mechanical aptitude, attention to detail, accurate documentation, and a consistent commitment to safety and quality. Work Schedule: Monday - Friday (7:00 AM - 3:30 PM) & Overtime Eligible Flexibility To Work 2nd Shift (3:30 PM - 12:00 AM) Is also Preferred Requirements: Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. First Key Responsibilities: · Press and Tooling Setup · Set up and operate mechanical, hydraulic, and other metal stamping presses in accordance with approved procedures. · Install, align, secure, and remove progressive, compound, blanking, forming, piercing, and secondary-operation dies. · Verify that tooling identification and revision levels match the applicable work order, setup sheet, and production documentation. · Set and adjust shut height, stroke, press speed, feed length, material alignment, die-protection systems, lubrication, and other operating parameters. · Load and thread coil stock or strip material through feeders, guides, and tooling. · Operate and adjust coil-fed stamping systems and related material-feeding equipment. · Complete safe, accurate, and repeatable press setups within established timeframes. · Meet setup and changeover time expectations. · Produce acceptable first-piece samples with minimal adjustment. · Maintain required production rates while protecting product quality. · Minimize scrap, rework, unplanned downtime, and preventable tooling damage. · Complete all required production and quality records accurately. · Follow approved procedures without bypassing safety or quality controls. · Promptly communicate production, tooling, equipment, and quality concerns. · Maintain an organized and professional work area while supporting continuous-improvement initiatives. Non-essential Responsibilities: 1. Performs other duties as directed., 2. Enter additional non-essential responsibilities Position Qualifications and Competency Statements: · Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action. · Integrity – Ability to demonstrate consistency between words and actions. Follows through on commitments · Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges. · Work Ethic – Ability to make decisions based upon ethical principles, considering how the choice will affect others · Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information. · Achieving results and problem solving – Ability to collect and analyze information, problem-solve, and make recommendation for decisions. · Client orientation – Ability to prioritize the client’s needs first. · Accountability – Ability to accept responsibility and account for his/her actions. · Managing staff – Ability to identifying and developing the key skills necessary for employees to reach target performance in their specific roles. · Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines. · Communication – Ability to effectively communicate with others verbally and in writing. · High emotional intelligence – Ability to offers and accepts feedback with well-meaning intention. The ability to show empathy and encourage partnerships. · Ability to Embrace Change – Ability to adapt and is flexible to changes in work. · Innovative Thinking – Ability to demonstrates a positive attitude and is openness to new ideas and innovations. Knowledge, Skills, and Abilities · Ability to organize work and complete setups within expected timeframes. · Ability to manage multiple priorities in a fast-paced manufacturing environment. · Strong mechanical aptitude and troubleshooting skills. · Ability to read and interpret engineering drawings, blueprints, setup sheets, work instructions, and inspection plans. · Ability to use precision-measuring instruments accurately. · Ability to communicate clearly and professionally with coworkers and supervisors. · Ability to maintain the confidentiality of customer products, drawings, tooling, and manufacturing processes. · Willingness to learn new equipment, tooling systems, quality requirements, and production methods. · Strong commitment to workplace safety and product quality. Education and Experience · High school diploma, GED, vocational education, or equivalent manufacturing experience. · Five or more years of metal stamping setup experience. · Experience with progressive, compound, and secondary-operation dies. · Experience with coil-fed stamping operations and related material-feeding equipment. · Experience working within ISO 9001, ISO 13485, AS9100, or similar regulated quality-management systems. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organization services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organizations. It also has a rapidly developing presence in highly specialized and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralized and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. 2025, Eurofins generated total revenues of EUR € 7.296 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description The Senior FSE is considered a subject matter expert in the field of Calibrations, Preventative Maintenance and Repairs and the technical authority for the calibration and certification of clean rooms, biosafety cabinets and other controlled environments. They are expected to be CETA certified, write protocols, methods and SOP’s within their field of expertise, train and direct calibrations, qualifications, and certifications, and review and approve certification work carried out by other field service personnel. The role holds the professional credential on which the business's certification registration depends. The business will operate initially under CETA registration, and the role is accountable for building the operating record, testing hours and customer endorsements required to obtain NEBB Cleanroom Performance Testing firm certification, and for holding the NEBB certification personally on the firm's behalf. Certification Delivery • Perform and authenticate certification and requalification of cleanrooms and controlled environments, including:, • Airflow velocity and volume testing, unidirectional and non-unidirectional, • HEPA and ULPA filter installation leak testing by aerosol photometer or discrete particle counter scanning, • Room pressurization and pressure cascade verification, • Airflow visualization studies, including recording and interpretation, • Recovery testing and containment leak testing, • Non-viable airborne particle counting and ISO classification, including sample location determination, • Biosafety cabinet and fume hood certification to NSF/ANSI 49, • Isolator, RABS and glovebox testing, including glove integrity, • Author test methods, certification protocols and standard operating procedures for the service line, and maintain them through revision., • Review and approve certification reports produced by other engineers and technicians., • Investigate out-of-specification results and support customer deviation and corrective action processes, • Train and direct field service personnel carrying out clean room certifications, including technicians outside of the direct reporting line., • Establish and maintain the business's CETA registration, and deliver all certification work to CETA standards from appointment., • Build the record required for NEBB CPT firm certification — continuous operating history, annual cleanroom testing hours, instrument ownership, local chapter membership and endorsement letters — and manage the application., • Obtain NEBB CPT certification personally, completing the Technician examinations and subsequently the Certified Professional examinations, so that the business can authenticate NEBB Certified Reports., • Maintain relationships with customers and awarding authorities who may provide endorsement in support of firm certification., • Support the evaluation and, if pursued, the technical scope of ISO 17025 accreditation for physical certification. Team • Establish the training and qualification pathway for certification engineers and technicians within and outside the direct reporting line., • Train, mentor and assess engineers and technicians toward CETA and NEBB certification, and sign their competency records. Instruments • Specify, commission and maintain the certification instrument set, including particle counters, aerosol photometers and generators, balometers and flow hoods, thermal and vane anemometers, and micromanometers. Assist in the calibration of similar equipment used by other Eurofins businesses., • Perform troubleshooting, preventative maintenance and repair both in the field and in the lab of various types of laboratory equipment including balances, pH meters, environmental monitoring equipment, hoods, biosafety cabinets, room HEPA filters, plate readers and chambers., • Manage personal parts inventory effectively., • Provide feedback to Director regarding any issue impacting service delivery, particularly issues impacting turnaround times. Commercial and administrative • Provide the technical basis for quotations, including room counts, classification, test scope and frequency., • Represent the business technically to customers during scoping discussions and audits., • Complete administrative paperwork and reports promptly and accurately., • Follow good documentation practices (GDP) as applicable to daily activities., • Contact customers on time and schedule service efficiently., • Adhere to environmental health and safety guidelines., • Effectively communicate with clients and other internal and external parties., • Follow Eurofins work policies and all applicable SOPs. Ensure that training on both remains current., • Maintain client confidentiality, specifically if information about the customer is obtained from sources other than the customer (e.g. complainant, assessors)., • Act impartially within the management system., • Perform other tasks as assigned by Management. Qualifications Requirements • Four-year degree in a related field (e.g., chemistry, analytical chemistry, electronic engineering, or similar) plus 7-10 years’ experience in a related field, preferably as a Field Service Engineer., • SME on providing field service support for clean room certifications, hoods, biosafety cabinets, HEPA filters and other controlled environments., • CETA certification held and in good standing, obtained or renewed within the past five years — CNBT, RCP-CT, or equivalent CETA credential appropriate to the scope of work., • NEBB Cleanroom Performance Testing certification is an advantage, at either Certified Professional or Certified Technician level, held and in good standing. AABC certification will also be considered., • Clear, respectful, and timely verbal and written communication. Proven ability to author protocols, methods, qualification/validation documents and SOP’s., • Experience representing a certification firm during customer quality audits, state board of pharmacy inspections or FDA inspections is preferred., • Demonstrable knowledge of ISO 14644 Parts 1, 2 and 3, and ISO 14644-7 where isolators, RABS and gloveboxes are within scope., • NSF/ANSI 49 for biosafety cabinet and hood calibrations and certifications, • USP <797> and USP <800>, including state board of pharmacy certification and recertification requirements. Where this knowledge is not already held, it must be acquired within the first six months., • Physical ability to lift and transport equipment and perform tasks in various lab environments, • Experience with technical troubleshooting and problem solving, • Must be self-motivated and proactive, • Valid drivers license, • Clean driving record, • Ability to travel within customer territory up to 5 days per week Monday-Friday. Overnight travel as needed. Additional Information Position is full-time, Monday through Friday, 8am-5pm with overtime as needed. Candidates currently living within a commutable distance of North Brunswick, NJ are encouraged to apply. Pay range: $100,000 - $130,000 annually depending on related experience and qualification. Excellent full time benefits including • Comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays Eurofins USA BioPharma Services is a Disabled and Veteran Equal Employment Opportunity employer.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Pearce from CBRE is seeking an Experienced Critical Power Field Technician (UPS Field Service Engineer) to support customers throughout Newark, NJ, and the surrounding region. This position provides preventive maintenance, emergency service, commissioning support, and battery services on UPS systems, DC power systems, battery plants, PDUs, and static transfer switches in mission-critical environments including data centers, telecommunications facilities, healthcare facilities, and industrial sites. Success in this role requires strong electrical troubleshooting skills, sound technical judgment, and the ability to work independently while delivering exceptional customer service. You will be expected to safely diagnose complex power system issues, restore equipment to operational status, and build long-term customer confidence through professionalism and technical expertise. Core Responsibilities: • Perform preventive maintenance, inspections, testing, troubleshooting, and repairs on UPS systems, battery plants, DC power systems, PDUs, STS units, inverters, and related critical power equipment., • Diagnose electrical and control system faults using schematics, test equipment, manufacturer documentation, and industry best practices., • Install, commission, and replace UPS systems, battery strings, battery monitoring systems, maintenance bypass equipment, and associated power infrastructure., • Respond to emergency service calls and restore customer systems to operational status while maintaining the highest safety and quality standards., • Perform battery testing, capacity testing, failure analysis, and lifecycle replacement services., • Complete service reports, maintenance documentation, and customer communications accurately and professionally., • Develop strong customer relationships through technical expertise, responsiveness, and exceptional service delivery., • Mentor junior technicians and support field training efforts by sharing troubleshooting techniques, safety practices, and technical knowledge., • Maintain compliance with OSHA, NFPA 70E, company safety procedures, and customer site requirements., • Support additional field service activities as business and customer needs evolve. Core Experience: • Minimum 3+ years of hands-on experience servicing UPS systems, battery systems, DC power equipment, generators, switchgear, data center infrastructure, or other mission-critical electrical infrastructure., • Experience supporting equipment from manufacturers such as Eaton, Vertiv/Liebert, Schneider Electric/APC, Mitsubishi, Toshiba, ABB, or comparable critical power platforms is strongly preferred., • Strong understanding of AC and DC electrical theory, power distribution systems, and battery technologies., • Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation., • Experience using multimeters, power quality analyzers, battery testing equipment, and other diagnostic tools., • Demonstrated ability to independently troubleshoot and resolve complex electrical and electronic system failures., • Strong customer-facing communication skills with the ability to explain technical findings, recommendations, and corrective actions to both technical and non-technical stakeholders., • Proven commitment to safety, quality workmanship, and professional accountability., • Valid driver's license and willingness to travel within the assigned service territory, including occasional overnight travel as required., • Military veterans with backgrounds in electronics, avionics, communications, radar, power generation, electrical maintenance, nuclear power, or related technical specialties are highly encouraged to apply. Physical/Work Environment: At Pearce, safety is our highest priority. All employees are expected to comply with OSHA, DOT, NFPA 70E, customer site requirements, and company safety policies at all times. • Valid driver's license with an acceptable driving record and the ability to meet company vehicle requirements., • Ability to pass all required pre-employment screenings, including a drug screening and background check, where applicable., • Ability to lift, carry, push, and/or move equipment and materials weighing up to 100 pounds with or without assistance., • Ability to frequently stand, walk, bend, kneel, crouch, reach overhead, and work in confined or restricted-access areas., • Ability to work safely around energized electrical equipment and within mission-critical customer environments., • Ability to perform physically demanding work for extended periods while maintaining attention to detail and safety awareness., • Ability to manage multiple priorities in fast-paced field environments while maintaining the highest standards of safety and quality., • Willingness and ability to travel throughout the assigned service territory, including overnight and multi-day travel as business needs require. Per diem is provided for qualifying travel., • Willingness to participate in an on-call rotation and respond to customer emergencies when required., • Ability to obtain and maintain Security Clearance Access to customer facilities, including data centers, telecommunications sites, healthcare facilities, industrial locations, and government installations. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $35—$50 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description Job Title: Survey CAD Technician Job Description Join our dynamic team where you will play a crucial role in processing survey field data and converting it into precise office drafting. You will develop 3D models of subsurface utilities, grading, and infrastructure while ensuring constructability, ADA compliance, and utility conflict resolution. Collaborate with project managers and field teams to resolve discrepancies, and actively engage in continuous professional development. Responsibilities • Process survey field data and convert it into accurate office drafting., • Develop 3D models of subsurface utilities, grading, and infrastructure., • Build theoretical models from design plans and compare them against as-built field data., • Perform clash detection to identify conflicts before construction issues occur., • Review plans for constructability, ADA compliance, and utility conflicts., • Prepare and maintain final as-built models and drawings., • Coordinate with project managers and field teams to resolve discrepancies before work goes to the field., • Post-process and analyze survey data using specialized software., • Prepare stakeout sketches, point files, and DXF files for construction stakeout needs., • Output accurate and professional As-Built Drawings., • Perform accurate volume calculations as needed., • Prepare accurate cut-sheets and sketches for a variety of field tasks., • Work collaboratively with team members to ensure project requirements are met., • Stay updated on industry standards, new surveying technologies, and best practices., • Actively promote and serve as a role model, setting the tone and reflecting the culture of the firm. Essential Skills • Strong survey or civil design experience preferred over pure architectural BIM., • Experience translating field data to office drafting and coordinated models., • Proficiency in AutoCAD for survey drafting and construction plans., • Strong preference for Trimble Business Center (TBC)., • Experience with Revit for BIM modeling and 3D coordination. Additional Skills & Qualifications • Proficiencies in Civil 3D as an acceptable alternative to TBC in some cases., • Experience with Carlson / Topcon / Leica platforms (equipment dependent)., • Familiarity with Bluebeam for review/redlines., • Drone data familiarity is preferred but not required. Work Environment This is an in-office role with the potential for hybrid flexibility once the candidate is comfortable with the processes and has established a standard operating rhythm. The office is comprised of about 30 team members, including surveyors, technicians, and administrative staff Job Type & Location This is a Contract to Hire position based out of Middlesex, NJ. Pay and Benefits The pay range for this position is $37.01 - $42.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Middlesex,NJ. Application Deadline This position is anticipated to close on Oct 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescription: About PrecisionX Group: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. Position Summary: We are seeking a skilled and dependable Setup Technician to support our precision metal stamping operations in Piscataway, New Jersey. Our manufacturing facility produces close-tolerance metal components for highly regulated medical device and aerospace applications. The Setup Technician is responsible for preparing, installing, adjusting, troubleshooting, and operating stamping presses, tooling, and auxiliary equipment. This position ensures that each production job is set up safely and efficiently in accordance with approved work instructions, engineering drawings, quality requirements, and customer specifications. The ideal candidate will have hands-on experience setting up progressive, compound, and secondary-operation dies; operating coil-fed press equipment; performing dimensional inspections; and resolving production issues. This role requires strong mechanical aptitude, attention to detail, accurate documentation, and a consistent commitment to safety and quality. Work Schedule: Monday - Friday (3:30 PM - 12:00 AM) - With Saturday & Sunday Overtime Eligibility Requirements: Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. First Key Responsibilities: · Press and Tooling Setup · Set up and operate mechanical, hydraulic, and other metal stamping presses in accordance with approved procedures. · Install, align, secure, and remove progressive, compound, blanking, forming, piercing, and secondary-operation dies. · Verify that tooling identification and revision levels match the applicable work order, setup sheet, and production documentation. · Set and adjust shut height, stroke, press speed, feed length, material alignment, die-protection systems, lubrication, and other operating parameters. · Load and thread coil stock or strip material through feeders, guides, and tooling. · Operate and adjust coil-fed stamping systems and related material-feeding equipment. · Complete safe, accurate, and repeatable press setups within established timeframes. · Meet setup and changeover time expectations. · Produce acceptable first-piece samples with minimal adjustment. · Maintain required production rates while protecting product quality. · Minimize scrap, rework, unplanned downtime, and preventable tooling damage. · Complete all required production and quality records accurately. · Follow approved procedures without bypassing safety or quality controls. · Promptly communicate production, tooling, equipment, and quality concerns. · Maintain an organized and professional work area while supporting continuous-improvement initiatives. Non-essential Responsibilities: 1. Performs other duties as directed., 2. Enter additional non-essential responsibilities Position Qualifications and Competency Statements: · Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action. · Integrity – Ability to demonstrate consistency between words and actions. Follows through on commitments · Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges. · Work Ethic – Ability to make decisions based upon ethical principles, considering how the choice will affect others · Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information. · Achieving results and problem solving – Ability to collect and analyze information, problem-solve, and make recommendation for decisions. · Client orientation – Ability to prioritize the client’s needs first. · Accountability – Ability to accept responsibility and account for his/her actions. · Managing staff – Ability to identifying and developing the key skills necessary for employees to reach target performance in their specific roles. · Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines. · Communication – Ability to effectively communicate with others verbally and in writing. · High emotional intelligence – Ability to offers and accepts feedback with well-meaning intention. The ability to show empathy and encourage partnerships. · Ability to Embrace Change – Ability to adapt and is flexible to changes in work. · Innovative Thinking – Ability to demonstrates a positive attitude and is openness to new ideas and innovations. Knowledge, Skills, and Abilities · Ability to organize work and complete setups within expected timeframes. · Ability to manage multiple priorities in a fast-paced manufacturing environment. · Strong mechanical aptitude and troubleshooting skills. · Ability to read and interpret engineering drawings, blueprints, setup sheets, work instructions, and inspection plans. · Ability to use precision-measuring instruments accurately. · Ability to communicate clearly and professionally with coworkers and supervisors. · Ability to maintain the confidentiality of customer products, drawings, tooling, and manufacturing processes. · Willingness to learn new equipment, tooling systems, quality requirements, and production methods. · Strong commitment to workplace safety and product quality. Education and Experience · High school diploma, GED, vocational education, or equivalent manufacturing experience. · Five or more years of metal stamping setup experience. · Experience with progressive, compound, and secondary-operation dies. · Experience with coil-fed stamping operations and related material-feeding equipment. · Experience working within ISO 9001, ISO 13485, AS9100, or similar regulated quality-management systems. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.

Job DescriptionDescriptionCME Associates, a leading engineering and consulting firm in Parlin, NJ, is seeking a highly skilled Inspector to join our team. The ideal candidate will have experience in various construction aspects, ideally, including sheet pile, and concrete formwork & reinforcement. Experience in water main, storm sewer, paving, and civil site work is a plus. As an Inspector, you will play a crucial role in ensuring compliance with project specifications and industry standards. Responsibilities • Conduct Inspections: Perform on-site inspections to monitor construction activities and ensure compliance with project plans, specifications, and applicable codes., • Documentation: Maintain accurate records of construction activities, including daily reports, photographs, and inspection logs., • Quality Assurance: Conduct quality assurance checks on materials, workmanship, and construction processes to ensure conformance with project requirements., • Coordinate with Contractors: Communicate regularly with contractors to address concerns, provide guidance, and facilitate the resolution of construction-related issues., • Compliance Oversight: Monitor contractor compliance with safety regulations, environmental requirements, and permit conditions., • Progress Reporting: Provide regular progress updates to project managers and clients, highlighting milestones achieved and potential delays., • Problem Resolution: Identify and resolve construction-related problems promptly to minimize project disruptions and maintain schedule adherence. Qualifications • Experience: Minimum of 3 years of relevant experience in construction inspection, preferably in the areas of pile driving, concrete work, water main, storm sewer, paving, and civil site work., • Certifications: Possession of relevant certifications such as ACI Concrete Field Testing Technician Grade I, NICET certifications, or equivalent., • Knowledge: In-depth understanding of construction methods, materials, and industry regulations., • Communication Skills: Strong verbal and written communication skills to effectively interact with contractors, clients, and project stakeholders., • Attention to Detail: Meticulous attention to detail to identify discrepancies and ensure adherence to project specifications., • Problem-Solving Skills: Ability to troubleshoot issues and propose effective solutions in a dynamic construction environment., • Team Player: Demonstrated ability to work collaboratively within a multidisciplinary team environment. BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job DescriptionJob Title: Engineering Technician Location: South Plainfield, NJ Type: Contract to Hire Compensation: $25/hour Contractor Work Model: Onsite Hours: 1st Shift ENGINEERING TECHNICIAN Responsibilities: • Responsible for standard technician duties when no one else is available., • Maintain standardization charts on all tools within the characterization laboratory, • Qualify new machinery and requalify tools that have been repaired., • Actively monitor equipment’s health, and plan preventive maintenance when needed, • Generate operational documents such as standard procedures as needed, • Correspond with outside venders in professional manner, • Make any solutions that laboratory might need for etching/ polaron., • Track chemical inventory and make sure that it is ordered when necessary., • Coordinate repairs on malfunctioning tools., • Approve of any changes to lab procedures, • Operate System 28/G4 when no-one else is available., • Ability to train in creating and collecting calibration data for adjustments and use in MQW cal for growth, • Record gas consumption every week. Qualifications:, • Bachelor’s degree or above in Materials Science, Chemistry, Chemical Engineering, Electrical Engineering, or Mechanical Engineering, • Must be fluent in English., • Cleanroom experience is preferred System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description Job Title: Product Engineer (Battery Electrode Materials / Coatings) Location: Somerset, NJ (Onsite) Type: Contract-to-hire Hours: 8am–5pm or 9am–6pm (flex) Pay: $28–$36/hr (depending upon experience) Overview: A specialty materials company focused on advanced battery materials and nanotechnology - they design and manufacture materials used in lithium-ion and next-generation batteries. Why this role is different This is an engineering-forward, hands-on materials role (not a technician position). You’ll be working at the intersection of materials science + electrode processing + manufacturing scale-up, with growth potential. What you’ll do • Design, develop, and help manufacture battery electrodes, including formulation and processing of:, • Active material + conductive carbon + binder systems, • Prepare and optimize powders, dispersions/slurries, and coated films, • Characterize powders, films, and dispersions (quality, morphology, performance-related properties), • Support development of both traditional battery materials and new active materials intended for commercialization, • Document experiments clearly and collaborate cross-functionally (R&D/manufacturing/customer-facing teams) Must-haves • BS/MS in Chemical Engineering, Chemistry, or Materials Science & Engineering, • Hands-on experience with powders + slurries/dispersion + coating/film formation (core requirement), • Some exposure to battery electrodes (any chemistry is OK), • Working knowledge of wet chemistry and/or solid-state chemistry, • Comfortable with standard lab equipment and hands-on experimental work Nice-to-haves • Electrode processing: slurry mixing, viscosity/rheology, wet coating, tape casting/doctor blade, drying, calendering, • Battery materials background (Li-ion / Na-ion / solid-state): cathode/anode powders, conductive carbons, solid electrolytes, • Powder/film characterization: particle size, BET surface area, SEM, XRD, DSC/TGA (or similar) Key skills Battery electrode processing • Slurry formulation (aqueous and NMP-based), dispersion, deagglomeration, • Coating (tape casting / doctor blade / roll-to-roll concepts), drying, film uniformity, • Electrode composition optimization (active material / carbon / binder ratios), • Powder and film characterization; particle morphology control Battery materials • Cathode materials (Li-ion / Na-ion): NMC/NCA/LFP/LMO/LNMO (and related oxides/phosphates), • Anode materials: graphite (natural/synthetic), hard carbon, silicon–carbon, lithium titanate (LTO), • Electrolyte / solid electrolyte materials: polymer/ceramic composite electrolytes; solid-state electrolyte concepts (neicorporation.com), • Conductive additives / carbons: conductive carbon black, graphene/advanced carbons (as applicable), activated carbon (neicorporation.com), • Binders (common electrode binder systems): PVDF, CMC, SBR (latex), PTFE (as applicable), • Typical electrode solvents/process chemicals: NMP (non-aqueous processing), water-based binder processing #M3- #LI- Ref: #558-Scientific

Job DescriptionElectronic TechnicianDepartment: Maintenance Reports to: Maintenance Manager FLSA Status: Non-exempt Job Type: Full-time Location: New Jersey Pay Range: $35 – $42 per hour ScheduleMonday – Friday, 8:00 AM – 5:00 PMAbout Our ClientOur client is a family-owned business and has grown into the largest privately held polyethylene extruder in the U.S. While they’ve expanded their reach, they remain grounded in the values that shaped their foundation: faith, integrity, perseverance, and humility. Our client believes that people are at the center of their success. Every team member plays a vital role in helping build lasting relationships, deliver exceptional products, and create a positive impact on customers and communities. This position contributes to a mission driven by purpose and principle, where employees work with dedication, lead with heart, and stay true to the values that continue to guide the organization. Job Summary The Electronic Technician will modify, repair, and improve existing electronic products, equipment, and controls and will assist in developing new or updated electronic systems, components, or products. Essential Functions • Troubleshoot and facilitate repairs on electronic/electrical equipment and machinery used in manufacturing., • Identify and troubleshoot manufacturing processes, mechanical equipment, machinery, and components., • Interface with the Maintenance Department to identify replacement parts or components as needed., • Apply knowledge of commonly used concepts, practices, and procedures within the field., • Apply principles and techniques of engineering to accomplish assigned goals., • Rely on experience and judgment to plan and accomplish goals while following established instructions and guidelines., • Perform a variety of complex tasks requiring independent judgment., • Report potentially dangerous electrical equipment to the supervisor and take appropriate steps to resolve the issue., • Perform safety checks to ensure design plans are feasible under various conditions., • May lead and direct the work of others., • Develop and maintain a positive employee attitude toward their work and fellow employees., • Provide backup support for the Maintenance Manager as needed., • Perform other duties as assigned by the Maintenance Manager. Qualifications & Experience, • Bachelor's degree in Electrical/Electronic Engineering and/or a minimum of 5 years of experience in the field or a related area., • Experience in a manufacturing environment is strongly preferred. Knowledge & Skills, • Ability to perform high-level mathematical functions., • Ability to read, comprehend, and follow necessary safety procedures, signs, and instructions., • Thorough understanding of electronics principles and design., • Proficiency with Microsoft Office Suite or related software., • Strong attention to detail and organizational skills., • Excellent problem-solving abilities., • Ability to follow highly complex directions and procedures., • Excellent verbal and written communication skills across all levels of the organization., • Bilingual skills are a plus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position.Physical Requirements, • Moderate physical activity is required., • Significant amount of walking throughout the workday., • Lifting is required., • Ability to distinguish various wire colors and identify electronic system sections and wiring. Working Conditions, • This position normally works in a manufacturing environment., • Hearing, eye, and foot protection are mandatory when engaged in activities within the plant., • Ability to work in temperatures reaching 110°ree;F. What Our Client Offers, • Medical, Dental, and Vision Insurance, • 401(k) Retirement Plan with Company Match, • Paid Time Off (PTO) and Holidays, • Tuition Reimbursement Program, • Employee Referral Program, • Inclusive and Collaborative Work Culture, • Professional Growth and Development Opportunities Pay Range: $35 – $42 per hour Schedule: Monday – Friday, 8:00 AM – 5:00 PM

Job DescriptionCompany Description BEUMER Group is an international leader in intralogistics, specializing in conveying, loading, palletising, packaging, sortation, and distribution technology across a wide range of industries, including airports, e-commerce, warehousing & distribution, and bulk material handling. We offer the right solution for nearly every logistics challenge. As a family-owned company, BEUMER combines tradition with innovation. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Warehouse Technician I is responsible for supporting daily warehouse operations, including receiving, inventory management, order fulfillment, shipping, production support, and warehouse organization. This role works closely with Spare Parts, Project Management, Engineering, Accounting, and other departments to support customer requirements and operational goals. This position plays a critical role in maintaining inventory accuracy, supporting operational efficiency, and delivering world-class customer service. The successful candidate will contribute to warehouse standardization, continuous improvement initiatives, and future technology implementations that support long-term growth and operational excellence. Key Responsibilities • Support daily warehouse operations, including receiving, inventory management, material storage, picking, packing, shipping, and order fulfillment., • Ensure inventory accuracy and maintain an organized, efficient, and safe warehouse environment., • Process inbound and outbound shipments while supporting the efficient flow of materials throughout the warehouse., • Perform cycle counts, inventory audits, and support annual physical inventory activities., • Safely and proficiently operate all warehouse equipment, including forklifts, stand-up reach trucks, pallet jacks, and scissor lifts., • Maintain accurate inventory transactions and documentation utilizing SAP, RF scanners, and related business systems., • Support future WMS implementation efforts and assist in the development, standardization, and continuous improvement of warehouse processes, work instructions, SOPs, and operational best practices., • Support safety initiatives, comply with company policies and regulatory requirements, and contribute to a culture where safety is a shared responsibility. Compensation: $24.00 per hour. #TalentPoweredByYou Qualifications Qualifications: • 1-3 years of warehouse, distribution, manufacturing, or spare parts experience., • Strong knowledge of warehouse operations, inventory management, shipping, receiving, and material flow., • Experience operating forklifts, stand-up reach trucks, and other warehouse material handling equipment., • Ability to safely and proficiently operate all warehouse equipment utilized within the facility., • SAP experience preferred; experience utilizing ERP systems, RF scanners, or warehouse technology strongly preferred., • Experience working within or supporting a Warehouse Management System (WMS) environment preferred., • Proficiency with Microsoft Excel, Outlook, and Word., • Ability to create, maintain, and utilize spreadsheets, reports, and electronic documentation., • Experience supporting process improvement, warehouse standardization, or continuous improvement initiatives preferred., • Strong commitment to safety, inventory accuracy, operational discipline, and customer service., • Strong organizational, communication, and problem-solving skills., • Ability to work across all warehouse functions while maintaining productivity and accuracy., • Ability to lift up to 50 pounds and perform frequent walking, standing, bending, and lifting., • Willingness and flexibility to work overtime, weekends, or adjusted schedules as needed to support customer commitments and business requirements. Work Schedule: Standard working hours are Monday through Friday, 8:00 AM to 4:30 PM. Flexibility and willingness to work overtime, weekends, or adjusted schedules as needed to support customer requirements, emergency orders, critical shipments, and business objectives. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential. Equal Opportunity Statement: BEUMER is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, sex (including pregnancy and breastfeeding), gender, affectional or sexual orientation, gender identity or expression, transgender status, national origin, age, ancestry, disability (mental or physical), veteran status, genetic information, atypical hereditary cellular or blood trait, marital status, civil union status, domestic partner status, or any other status protected under local, state or federal laws - prohibits discrimination, harassment, and retaliation in all aspects of employment. This commitment applies to recruitment, hiring, training, promotion, compensation, benefits, discipline, termination, and all other terms and conditions of employment. By accepting an offer of employment with BEUMER, the employee agrees to abide by all policies and practices that promote a workplace free from discrimination and harassment and acknowledges BEUMER’S commitment to diversity and inclusion.

Job Description:\n\n \n Together We Build – Partnership, Innovation, Excellence, and Safety at Kelso Industries \n We're not just offering a job, we're inviting you to be part of a team built on PARTNERSHIP, INNOVATION, EXCELLENCE, and SAFETY. \n \n PARTNERSHIP means we work together with trust, loyalty, and an owner mindset, always striving for win-win outcomes. \n \n \n INNOVATION drives us to think differently and create real value in everything we do. \n \n \n EXCELLENCE pushes us to set high expectations and deliver exceptional results. \n \n \n SAFETY is our foundation—both physical and psychological safety matter every single day. \n \n If you're looking for a place where you can grow your career, be valued for who you are, and contribute to something meaningful, we'd love to have you on our team. \n The Kelso Industries company is comprised of 27 (and growing) market-leading operating companies with over 2,800 employees that deliver unmatched HVAC, mechanical, refrigeration, plumbing, and electrical solutions. We are actively building the nation's preferred technical service partnership for commercial MEP+ ecosystems, empowering industrial, commercial, and institutional clients—including Fortune 500 companies and other industry leaders across the United States—with reliable, innovative service. \n \n\nGeneral Manager – Supreme HVAC\nPosition Summary\n\n Supreme HVAC is seeking an experienced, hands-on General Manager to lead the overall performance and continued growth of the business. The General Manager has responsibility for all facets of the company, including operations, financial performance, customer experience, employee leadership, business development, safety, and organizational effectiveness.\n\n This position serves as the senior leader for the business and is accountable for delivering strong financial and operational results while maintaining the high level of service and relationships that have built Supreme HVAC's reputation in the market.\n\n The ideal candidate is a proven HVAC leader who understands both the operational and financial sides of the business. This individual will be comfortable leading field and office teams, managing a P&L, improving processes, developing employees, building customer relationships, and identifying opportunities to grow the business.\n\nKey Responsibilities\nBusiness & Operational Leadership\n\n Provide overall leadership and direction for Supreme HVAC, with accountability for the performance of the business.\n Oversee day-to-day HVAC operations, including service, maintenance, repair, installation, scheduling, dispatch, and supporting office functions.\n Establish clear operating priorities, performance expectations, and accountability across the organization.\n Ensure work is scheduled, executed, documented, and completed efficiently while maintaining high standards for quality and customer service.\n Evaluate existing workflows, systems, and processes and implement improvements that increase productivity, efficiency, scalability, and profitability.\n Use operational and financial data to identify trends, address performance gaps, and make informed business decisions.\n Partner with corporate and shared-service teams to effectively support business operations and strategic initiatives.\n Lead the organization effectively through seasonal demand fluctuations, changing business priorities, and continued growth.\n\nFinancial & P&L Management\n\n Own and manage the financial performance of the business, including revenue, gross margin, operating expenses, EBITDA/profitability, and cash performance.\n Develop and manage annual budgets, forecasts, operating plans, and financial targets.\n Review P&L statements and key financial and operational metrics to understand business performance and identify areas requiring action.\n Manage controllable expenses while ensuring appropriate resources are available to support employees, customers, and business growth.\n Identify and execute cost-saving, productivity, and margin-improvement initiatives.\n Monitor labor utilization, productivity, material costs, inventory, purchasing, and other major drivers of profitability.\n Share accountability for receivables and collections and ensure appropriate controls around cash, equipment, parts, materials, and inventory.\n Maintain appropriate inventory levels while minimizing excess inventory, waste, and unnecessary working capital.\n\nSales, Growth & Business Development\n\n Drive achievement of company revenue and sales goals in partnership with sales, service, operations, and corporate leadership.\n Develop strategies to expand existing customer relationships and generate new business opportunities.\n Maintain strong relationships with key customers and participate directly in strategic customer discussions when appropriate.\n Identify opportunities for additional services, maintenance agreements, replacement opportunities, new markets, and other revenue streams.\n Develop and maintain commercial relationships within the local business community, including industry associations, Chambers of Commerce, contractors, property owners/managers, and other potential business partners.\n Partner with marketing and sales resources to strengthen Supreme HVAC's market presence and support sustainable growth.\n Monitor local market conditions, competitors, customer needs, and industry trends to identify potential opportunities and risks.\n\nCustomer Experience\n\n Maintain a customer-first culture throughout the organization.\n Ensure customers receive timely, professional, high-quality service from initial contact through completion of work.\n Monitor customer satisfaction and establish appropriate service standards and expectations.\n Personally engage in the resolution of significant or escalated customer concerns.\n Identify recurring customer issues and address their underlying operational or process causes.\n Strengthen customer retention and repeat business through consistent service delivery and relationship management.\n\nPeople Leadership & Talent Development\n\n Lead, coach, and develop office, field, operational, and management personnel.\n Establish clear goals, responsibilities, and performance expectations for leaders and employees.\n Build a culture of accountability, collaboration, customer service, safety, and continuous improvement.\n Partner with Talent Acquisition and Human Resources to recruit and retain high-quality employees.\n Ensure appropriate staffing levels based on business demand, workload, and growth plans.\n Conduct regular performance discussions and ensure managers are effectively coaching and developing their teams.\n Identify high-potential employees and create development and succession plans for key positions.\n Address performance or employee-relations concerns promptly and consistently in partnership with Human Resources.\n Foster an environment where employees understand how their individual performance contributes to the overall success of the business.\n\nSafety & Compliance\n\n Champion a safety-first culture with the goal of zero preventable accidents and incidents.\n Ensure employees follow company safety policies, OSHA requirements, applicable HVAC regulations, and established operating procedures.\n Partner with safety leadership to proactively identify and mitigate workplace and field safety risks.\n Ensure appropriate training, licensing, certifications, and documentation are maintained for employees and operations.\n Maintain compliance with applicable federal, state, and local regulations, building codes, environmental requirements, and industry standards.\n\nInventory, Purchasing & Vendor Management\n\n Oversee inventory levels for HVAC equipment, materials, parts, tools, and other operational resources.\n Develop strong relationships with key suppliers and vendors and ensure appropriate service levels, pricing, and availability.\n Work with purchasing and operational leaders to manage equipment and material availability while minimizing unnecessary inventory.\n Evaluate vendor performance and identify opportunities to improve pricing, terms, quality, and service.\n Support supply-chain planning to minimize disruptions and ensure technicians and installers have the materials required to complete work efficiently.\n\nTechnology & Continuous Improvement\n\n Champion the effective use of technology to improve operational visibility, employee productivity, customer experience, and financial performance.\n Leverage ServiceTitan and other business systems to monitor scheduling, dispatch, technician productivity, sales performance, customer activity, and operational KPIs.\n Ensure employees are effectively utilizing established systems and processes.\n Identify opportunities to automate or streamline administrative and operational workflows.\n Lead implementation and adoption of process improvements and new technologies.\n\nKey Performance Indicators\n\n Success in this position may be measured through:\n\n Revenue growth and achievement of annual business plan\n Gross margin and profitability performance\n EBITDA/operating income\n Labor productivity and utilization\n Service and installation performance\n Customer satisfaction and retention\n Sales conversion and revenue generation\n Maintenance agreement/customer retention\n Accounts receivable and cash collection\n Inventory management\n Employee retention and engagement\n Safety performance\n Technician and employee productivity\n Achievement of operational improvement initiatives\n\nQualifications\nRequired\n\n Minimum of 5 years of progressive leadership experience managing teams and business operations.\n Demonstrated experience within HVAC, mechanical contracting, building services, or a closely related service-based industry.\n Experience leading field and office-based employees.\n Strong understanding of service operations, including scheduling, dispatch, field productivity, customer service, and workforce management.\n Demonstrated financial acumen with the ability to understand and manage budgets, P&L statements, margins, operating expenses, and business performance metrics.\n Strong leadership, communication, decision-making, and problem-solving skills.\n Ability to operate effectively in a fast-paced, fluid, and seasonally driven environment.\n Strong organizational skills with the ability to manage competing priorities.\n Comfortable using technology and business systems to manage operations and make data-driven decisions.\n Valid driver's license.\n High school diploma or GED.\n\nPreferred\n\n Bachelor's degree in Business Administration, Management, Engineering, Construction Management, or a related field.\n Previous experience as a General Manager, Branch Manager, Operations Manager, Service Manager, or senior operational leader within the HVAC industry.\n Commercial HVAC service and/or installation experience.\n Experience with ServiceTitan or a comparable field-service management platform.\n Experience with HVAC supply chain, purchasing, equipment, and inventory management.\n Experience leading business growth, sales, or business development initiatives.\n Knowledge of applicable HVAC codes, licensing requirements, EPA regulations, and industry standards.\n EPA 608, NATE, or other applicable HVAC certifications are a plus.\n\nLeadership Profile\n\n The successful General Manager will be:\n\n Business-minded: Understands how operational decisions impact revenue, margin, cash flow, and profitability.\n Hands-on: Comfortable moving between strategic business planning and day-to-day operational problem solving.\n People-focused: Builds strong teams, develops leaders, and creates accountability without losing sight of employee engagement.\n Customer-driven: Understands that long-term growth depends on consistently delivering a strong customer experience.\n Data-driven: Uses financial and operational metrics to identify issues, make decisions, and measure improvement.\n Growth-oriented: Continuously looks for opportunities to strengthen existing operations and expand the business.\n Decisive: Makes timely, informed decisions and takes ownership of results.\n Adaptable: Performs effectively in a fast-moving environment where priorities and customer demands can change quickly.\n Safety-minded: Treats employee and customer safety as a fundamental business responsibility.\n\nWhy Join Supreme HVAC?\n\n This is an opportunity to take ownership of an established HVAC business while having the resources and support to drive its next stage of growth. The General Manager will have significant influence over business strategy, operations, team development, customer relationships, and financial performance.\n\n For a leader who enjoys building strong teams, improving businesses, developing customer relationships, and taking accountability for results, this role provides the opportunity to make a meaningful impact across the entire organization.\n\n \n\n Compensation & Benefits \n\n \n \n Base Salary Range: $150,000-$230,000\n \n \n \n Bonus: 15%-20% annual bonus target\n \n \n \n Benefits: Medical, dental, vision, 401(k), PTO \n \n\n \n\n Pay Transparency Statement\n \n The compensation range provided represents the Company's good-faith estimate of the base salary for this position at the time of posting. Actual compensation may vary based on experience, qualifications, skills, geographic location, internal equity, and other business considerations. \n\n \n Why Join Our Team? \n Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. \n Here you will experience: \n Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. \n Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. \n Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. \n Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. \n \n Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Job Description:\n\n Together We Build – Partnership, Innovation, Excellence, and Safety\n At Kelso Industries, 5,000+ employees across 40+ companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first.\n Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications.\n\n \nGeneral Manager – Supreme HVAC\nPosition Summary\n\n Supreme HVAC is seeking an experienced, hands-on General Manager to lead the overall performance and continued growth of the business. The General Manager has responsibility for all facets of the company, including operations, financial performance, customer experience, employee leadership, business development, safety, and organizational effectiveness.\n\n This position serves as the senior leader for the business and is accountable for delivering strong financial and operational results while maintaining the high level of service and relationships that have built Supreme HVAC's reputation in the market.\n\n The ideal candidate is a proven HVAC leader who understands both the operational and financial sides of the business. This individual will be comfortable leading field and office teams, managing a P&L, improving processes, developing employees, building customer relationships, and identifying opportunities to grow the business.\n\nKey Responsibilities\nBusiness & Operational Leadership\n\n Provide overall leadership and direction for Supreme HVAC, with accountability for the performance of the business.\n Oversee day-to-day HVAC operations, including service, maintenance, repair, installation, scheduling, dispatch, and supporting office functions.\n Establish clear operating priorities, performance expectations, and accountability across the organization.\n Ensure work is scheduled, executed, documented, and completed efficiently while maintaining high standards for quality and customer service.\n Evaluate existing workflows, systems, and processes and implement improvements that increase productivity, efficiency, scalability, and profitability.\n Use operational and financial data to identify trends, address performance gaps, and make informed business decisions.\n Partner with corporate and shared-service teams to effectively support business operations and strategic initiatives.\n Lead the organization effectively through seasonal demand fluctuations, changing business priorities, and continued growth.\n\nFinancial & P&L Management\n\n Own and manage the financial performance of the business, including revenue, gross margin, operating expenses, EBITDA/profitability, and cash performance.\n Develop and manage annual budgets, forecasts, operating plans, and financial targets.\n Review P&L statements and key financial and operational metrics to understand business performance and identify areas requiring action.\n Manage controllable expenses while ensuring appropriate resources are available to support employees, customers, and business growth.\n Identify and execute cost-saving, productivity, and margin-improvement initiatives.\n Monitor labor utilization, productivity, material costs, inventory, purchasing, and other major drivers of profitability.\n Share accountability for receivables and collections and ensure appropriate controls around cash, equipment, parts, materials, and inventory.\n Maintain appropriate inventory levels while minimizing excess inventory, waste, and unnecessary working capital.\n\nSales, Growth & Business Development\n\n Drive achievement of company revenue and sales goals in partnership with sales, service, operations, and corporate leadership.\n Develop strategies to expand existing customer relationships and generate new business opportunities.\n Maintain strong relationships with key customers and participate directly in strategic customer discussions when appropriate.\n Identify opportunities for additional services, maintenance agreements, replacement opportunities, new markets, and other revenue streams.\n Develop and maintain commercial relationships within the local business community, including industry associations, Chambers of Commerce, contractors, property owners/managers, and other potential business partners.\n Partner with marketing and sales resources to strengthen Supreme HVAC's market presence and support sustainable growth.\n Monitor local market conditions, competitors, customer needs, and industry trends to identify potential opportunities and risks.\n\nCustomer Experience\n\n Maintain a customer-first culture throughout the organization.\n Ensure customers receive timely, professional, high-quality service from initial contact through completion of work.\n Monitor customer satisfaction and establish appropriate service standards and expectations.\n Personally engage in the resolution of significant or escalated customer concerns.\n Identify recurring customer issues and address their underlying operational or process causes.\n Strengthen customer retention and repeat business through consistent service delivery and relationship management.\n\nPeople Leadership & Talent Development\n\n Lead, coach, and develop office, field, operational, and management personnel.\n Establish clear goals, responsibilities, and performance expectations for leaders and employees.\n Build a culture of accountability, collaboration, customer service, safety, and continuous improvement.\n Partner with Talent Acquisition and Human Resources to recruit and retain high-quality employees.\n Ensure appropriate staffing levels based on business demand, workload, and growth plans.\n Conduct regular performance discussions and ensure managers are effectively coaching and developing their teams.\n Identify high-potential employees and create development and succession plans for key positions.\n Address performance or employee-relations concerns promptly and consistently in partnership with Human Resources.\n Foster an environment where employees understand how their individual performance contributes to the overall success of the business.\n\nSafety & Compliance\n\n Champion a safety-first culture with the goal of zero preventable accidents and incidents.\n Ensure employees follow company safety policies, OSHA requirements, applicable HVAC regulations, and established operating procedures.\n Partner with safety leadership to proactively identify and mitigate workplace and field safety risks.\n Ensure appropriate training, licensing, certifications, and documentation are maintained for employees and operations.\n Maintain compliance with applicable federal, state, and local regulations, building codes, environmental requirements, and industry standards.\n\nInventory, Purchasing & Vendor Management\n\n Oversee inventory levels for HVAC equipment, materials, parts, tools, and other operational resources.\n Develop strong relationships with key suppliers and vendors and ensure appropriate service levels, pricing, and availability.\n Work with purchasing and operational leaders to manage equipment and material availability while minimizing unnecessary inventory.\n Evaluate vendor performance and identify opportunities to improve pricing, terms, quality, and service.\n Support supply-chain planning to minimize disruptions and ensure technicians and installers have the materials required to complete work efficiently.\n\nTechnology & Continuous Improvement\n\n Champion the effective use of technology to improve operational visibility, employee productivity, customer experience, and financial performance.\n Leverage ServiceTitan and other business systems to monitor scheduling, dispatch, technician productivity, sales performance, customer activity, and operational KPIs.\n Ensure employees are effectively utilizing established systems and processes.\n Identify opportunities to automate or streamline administrative and operational workflows.\n Lead implementation and adoption of process improvements and new technologies.\n\nKey Performance Indicators\n\n Success in this position may be measured through:\n\n Revenue growth and achievement of annual business plan\n Gross margin and profitability performance\n EBITDA/operating income\n Labor productivity and utilization\n Service and installation performance\n Customer satisfaction and retention\n Sales conversion and revenue generation\n Maintenance agreement/customer retention\n Accounts receivable and cash collection\n Inventory management\n Employee retention and engagement\n Safety performance\n Technician and employee productivity\n Achievement of operational improvement initiatives\n\nQualifications\nRequired\n\n Minimum of 5 years of progressive leadership experience managing teams and business operations.\n Demonstrated experience within HVAC, mechanical contracting, building services, or a closely related service-based industry.\n Experience leading field and office-based employees.\n Strong understanding of service operations, including scheduling, dispatch, field productivity, customer service, and workforce management.\n Demonstrated financial acumen with the ability to understand and manage budgets, P&L statements, margins, operating expenses, and business performance metrics.\n Strong leadership, communication, decision-making, and problem-solving skills.\n Ability to operate effectively in a fast-paced, fluid, and seasonally driven environment.\n Strong organizational skills with the ability to manage competing priorities.\n Comfortable using technology and business systems to manage operations and make data-driven decisions.\n Valid driver's license.\n High school diploma or GED.\n\nPreferred\n\n Bachelor's degree in Business Administration, Management, Engineering, Construction Management, or a related field.\n Previous experience as a General Manager, Branch Manager, Operations Manager, Service Manager, or senior operational leader within the HVAC industry.\n Commercial HVAC service and/or installation experience.\n Experience with ServiceTitan or a comparable field-service management platform.\n Experience with HVAC supply chain, purchasing, equipment, and inventory management.\n Experience leading business growth, sales, or business development initiatives.\n Knowledge of applicable HVAC codes, licensing requirements, EPA regulations, and industry standards.\n EPA 608, NATE, or other applicable HVAC certifications are a plus.\n\nLeadership Profile\n\n The successful General Manager will be:\n\n Business-minded: Understands how operational decisions impact revenue, margin, cash flow, and profitability.\n Hands-on: Comfortable moving between strategic business planning and day-to-day operational problem solving.\n People-focused: Builds strong teams, develops leaders, and creates accountability without losing sight of employee engagement.\n Customer-driven: Understands that long-term growth depends on consistently delivering a strong customer experience.\n Data-driven: Uses financial and operational metrics to identify issues, make decisions, and measure improvement.\n Growth-oriented: Continuously looks for opportunities to strengthen existing operations and expand the business.\n Decisive: Makes timely, informed decisions and takes ownership of results.\n Adaptable: Performs effectively in a fast-moving environment where priorities and customer demands can change quickly.\n Safety-minded: Treats employee and customer safety as a fundamental business responsibility.\n\nWhy Join Supreme HVAC?\n\n This is an opportunity to take ownership of an established HVAC business while having the resources and support to drive its next stage of growth. The General Manager will have significant influence over business strategy, operations, team development, customer relationships, and financial performance.\n\n For a leader who enjoys building strong teams, improving businesses, developing customer relationships, and taking accountability for results, this role provides the opportunity to make a meaningful impact across the entire organization.\n\n \n \n \n\n Compensation & Benefits \n\n \n \n Base Salary Range: $150,000-$230,000\n \n \n \n Bonus: 15%-20% annual bonus target\n \n \n \n Benefits: Medical, dental, vision, 401(k), PTO \n \n\n \n\n Pay Transparency Statement\n \n The compensation range provided represents the Company's good-faith estimate of the base salary for this position at the time of posting. Actual compensation may vary based on experience, qualifications, skills, geographic location, internal equity, and other business considerations. \n\n \n\n Why Join Kelso Industries? \n Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. \n Here you will experience: \n Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. \n Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. \n Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. \n Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. \n \n Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

QUALIFICATIONS NICET II+ in Highway Construction Inspection or BS Degree in Civil Engineering or equivalent; NJSAT Asphalt Technician Certification and TCP / Traffic Control Coordinator Certification; ACI Concrete Field Testing Technician Grade I certification, or the ability to acquire this cert

Job Description Hillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic. We have a demonstrated history of success for the past 35 years. We are 100% employee-owned ESOP and our history of success can be attributed to our motivation employee owner. We believe in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement. We are seeking a Project Manager in our Northern New Jersey office. Candidate must be dependable, enthusiastic, detail-oriented, and able to multi-task while working in a fast-paced environment. Assignments will include management of construction materials testing services for commercial and residential land development projects. Construction materials testing project duties will include management, coordination, supervision, review, and direction of technician staff for earthwork, concrete, foundation, masonry, steel, EIFS, and pavement construction testing. Prepare and submit bids and proposals and attend pre-bid meetings. Efficiently perform on-site project inspections including, but not limited to, soil bearing and compaction tests, concrete, and steel inspections. Meet with clients and attend site meetings, as necessary. Requirements • Bachelor's degree in construction management, Civil Engineering, or Geology is preferred., • Preferred 3-5 years of field or project management experience in Geotechnical Engineering, Construction Materials Testing, or Construction Project Management, • Engineer in Training or Registered Professional Engineer preferred but not required., • Experience managing a construction project backlog between $1-3 million., • Experience estimating, specifically determining labor requirements for various types of construction projects., • Some business development experience is a plus and must be able to interact/communicate with clients., • Experience managing construction/field staff a plus., • Specialty construction testing certifications a plus (ACI, NECEPT, ICC), • Perform other duties as required to assist the Branch Manager in running a successful operation. We offer a comprehensive benefits package including medical, dental, vision, disability, life, 401k w/company match, Employee Stock Ownership Plan (ESOP), Employee Assistance Plan and much more! Hillis-Carnes is proudly an Equal Opportunity Employer. Minorities and Women are encouraged to apply for this position. Job Posted by ApplicantPro

Job Description We are seeking a dedicated and skilled Field Maintenance Technician to join our team. The ideal candidate will be responsible for performing inspections, troubleshooting, and repairs on a variety of material handling equipment, including hoists and overhead cranes, at our customer facilities throughout the Tri-State area. This role requires a technician with a strong background in both mechanical and electrical systems, excellent communication skills, and the ability to work independently or as part of a team. The Field Maintenance Technician will ensure the reliable and safe operation of critical equipment, providing top-notch service to our customers. Key Responsibilities: • Field Inspections & Preventive Maintenance: Conduct on-site inspections and preventive maintenance of hoists, overhead cranes, and other material handling equipment at customer locations in the Tri-State area., • Troubleshooting & Repairs: Diagnose and troubleshoot mechanical and electrical issues, providing prompt and efficient repairs on-site to minimize downtime and restore equipment functionality., • Electrical Expertise: Perform electrical troubleshooting and repairs, including diagnostics of wiring, circuits, motors, and control panels associated with overhead cranes, hoists and other material handling equipment., • Mechanical Repairs & Replacements: Perform mechanical repairs and replace components such as gears, motors, brakes, and structural parts of overhead cranes, hoists and other material handling equipment., • Customer Interaction & Communication: Provide exceptional customer service by clearly communicating with customers regarding service needs, explaining inspection findings and repairs., • Safety Compliance: Ensure all work is performed in compliance with safety standards and regulations, adhering to both company and OSHA safety protocols., • Documentation & Reporting: Maintain detailed and accurate service records, documenting all inspections, repairs, parts used, and any other relevant service information., • Emergency Service Response: Be available to respond to emergency service calls as needed, prioritizing critical issues and ensuring minimal downtime for customers., • Collaboration & Support: Work closely with internal teams and the customer support department to provide a seamless service experience, reporting issues and offering input for process improvements., • Problem-Solving: Proactively identify potential issues with equipment and systems and recommend or implement solutions to avoid unplanned downtime. Required Skills & Qualifications: • Experience: 3+ years of experience in industrial maintenance, with a focus on material handling equipment (hoists, overhead cranes, etc.)., • Mechanical Expertise: Strong mechanical aptitude with hands-on experience in hydraulic, pneumatic, and mechanical systems maintenance and repair., • Electrical Knowledge: Proficient in electrical troubleshooting, including the ability to diagnose and repair motors, circuits, wiring, and control systems., • Customer Service: Excellent communication and interpersonal skills with a customer-focused approach, ensuring positive interactions with clients., • Problem-Solving Skills: Strong ability to troubleshoot and resolve issues independently and efficiently, ensuring minimal equipment downtime., • Teamwork & Independence: Ability to work both independently and collaboratively within a team to achieve optimal results., • Safety Awareness: Comprehensive understanding of safety standards and procedures, with a commitment to maintaining a safe working environment., • Attention to Detail: High attention to detail, ensuring that inspections and repairs are conducted thoroughly and accurately., • Valid Driver’s License: A valid driver’s license with a clean driving record, as travel to customer sites in the Tri-State area is required. Preferred Qualifications: • Certifications:, • Crane maintenance certification or relevant industry certifications preferred., • OSHA 10 or OSHA 30 Certification, • Training:, • Formal training in industrial maintenance, electrical systems, or mechanical systems is a plus. Physical Requirements: • Comfortable working at heights at times, • Ability to travel regularly within the Tri-State area., • Ability to work overtime as needed Benefits: • Competitive salary, • Health, dental, and vision insurance, • Paid time off (PTO) and holidays, • 401(k) non matching retirement plan, • Company mobile device for field service work, • Ongoing training and career development opportunities If you have the skills, experience, and motivation to excel in a dynamic, customer-focused environment, we encourage you to apply for the Field Maintenance Technician position. \nCompany Description A family owned company started in 1972 , we operate out of our Central NJ location in Hillsborough, NJ. Servicing all of the Northeast, we continue to expand our services across the country. Consisting of several divisions, we primarily focus on the design, fabrication, installation and servicing of material handling equipment. As an Executive Member of the Crane Manufacturers Association of America (CMAA), we provide equipment that is designed by qualified engineering personnel, manufactured with strict quality control processes, and installed by trained experienced technicians. Although designing, manufacturing and servicing of Overhead Cranes and Hoists is where it all started, we have complemented this sector of our business with a full Engineering and Project Management Division, Controls & Automation Division, Modernizations Division and Mechanical Contracting Division. A family owned company started in 1972 , we operate out of our Central NJ location in Hillsborough, NJ. Servicing all of the Northeast, we continue to expand our services across the country.\r\n\r\nConsisting of several divisions, we primarily focus on the design, fabrication, installation and servicing of material handling equipment.\r\n\r\nAs an Executive Member of the Crane Manufacturers Association of America (CMAA), we provide equipment that is designed by qualified engineering personnel, manufactured with strict quality control processes, and installed by trained experienced technicians.\r\n\r\nAlthough designing, manufacturing and servicing of Overhead Cranes and Hoists is where it all started, we have complemented this sector of our business with a full Engineering and Project Management Division, Controls & Automation Division, Modernizations Division and Mechanical Contracting Division.

Job Description Construction Materials Field Tech/Inspector HURRY! $1000 SIGN-ON BONUS* $$$ for all new hires! We offer a starting rate of $25.00/hr. with no experience. Already a seasoned technician? We offer a start up to $30/hr. or more based on experience. WHO IS HILLIS-CARNES? Hillis-Carnes Engineering Associates (HCEA) is a multi-disciplined ENR Top 500 engineering firm with 20 offices in the mid-Atlantic. We have a demonstrated history of success for the past 35 years. We are 100% employee-owned ESOP, and our history of success can be attributed to our motivational employee owner. We believe in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement. WHY HILLIS-CARNES? Through our ESOP (Employee Stock Option Program), you receive ownership stock in the company! • $2500 SIGN-ON BONUS* $$$ for all new hires!, • An additional bonus after one year of service!, • Competitive pay., • Paid on-the-job training., • Generous Paid Time Off/Holidays/Floater Holidays., • Paid education expenses for associated certifications., • Company cell or reimbursement for use of personal phone, • Employee Self-Service Portal, • Employee Referral Bonus program up to $5,000, • Free HCEA apparel and work boots, • Personal Protective Equipment and safety gear, • Paid mileage, • Fun company-sponsored events, Wellness Seminars, and more! Our Benefits Package: • Medical (w/Health Savings Account Options) Plans, • Dental and Vision Plans, • 100% Employer-Paid Benefits (Long-Term Disability, Basic Life), • Voluntary Short-Term Disability, • Voluntary Life, • Employee Assistance Program, • 401k w/ Company Match, • Employee Stock Ownership Plan (ESOP) in which employees acquire shares in the company; the more successful the company is, the more valuable the shares become. WHAT WILL I BE DOING? As a Construction Materials Testing Technician in the South Plainfield, NJ office, you will directly play an integral role in the success of our organization. As part of this team, you will work independently and in collaboration with our knowledgeable, dynamic staff and on a wide variety of land development and construction projects. The key responsibilities will include: • Field observations at jobsites in the region., • Sampling and testing of construction materials., • Preparing accurate daily logs that outline your inspections and results of the test you performed on construction materials. The construction materials you will be working with include soil, aggregates, concrete, grout, masonry, asphalt, and structural steel., • Daily communication with PM or Operations Manager regarding project progress or other pertinent communication by the contractor. WHAT ARE THE REQUIREMENTS? • Reliable vehicle for field work, valid driver's license, and satisfactory driving record., • Must meet additional pre-employment criteria., • Ability to lift and/or move up to 60-80 pounds (soil and concrete samples, nuclear gauges, other equipment), • Ability to work in all outdoor climates and mobility over various terrain., • Attention to detail and quality, while adhering to all safety requirements., • Effective verbal and written communication skills required., • Use of company provided tablet and working knowledge of MS Office programs., • Ability to perform basic math and use measurement tools., • With training, the ability to read and interpret plans, specifications, safety rules, operating and maintenance instructions, and procedure manuals. Hiring preference will be given to experienced technicians with verifiable certifications such as ACI, ICC, NICET, NJ DCA, etc. EE/Minorities and Women encouraged to apply. *$500 bonus paid after 90 days of employment: additional $500 bonus after successful completion of six months employment. Job Posted by ApplicantPro

Job Description Join a Leading Surveying Firm with a Legacy of Excellence Control Point Associates is not your average surveying firm — we are a dynamic team committed to delivering exceptional surveying services. With over 30 years of experience in land surveying, we specialize in services like construction stakeouts, boundary surveys, and 3D laser scanning, serving industries such as construction, engineering, and land development. Our team is expanding, and we’re looking for an experienced, highly technical Survey Technician to join us in Warren, NJ. This role is focused on survey computations, boundary analysis, and technical plan development — not field work or entry-level CAD drafting. If you're a skilled Survey Technician who thrives in a fast-paced, team-oriented environment, we want to hear from you! Why Control Point Associates? At Control Point Associates, we’re a team that focuses on doing great work and helping our employees grow. Here’s why joining us could be the perfect career opportunity for you: • 30+ Years of Expertise: We’ve earned a reputation for exceptional quality, precision, and dependability over three decades of service., • Cutting-Edge Technology: We utilize advanced tools like Trimble, Leica, and 3D laser scanners to ensure the highest standard of work., • Opportunities for Advancement: We invest in your career growth through ongoing training and certification programs., • Collaborative Team Culture: Our work environment promotes teamwork, where everyone contributes to achieving collective success., • Comprehensive Benefits: Enjoy medical, dental, and vision coverage, 401(k) matching, paid time off, and holiday breaks., • Diverse Work Experience: No two days are alike, with a mix of both field and office-based projects to keep your work dynamic and engaging., • Company Perks: Benefit from team lunches, weekly breakfast, holiday celebrations, and a fun, collaborative culture., • Supportive Work Environment: Your contributions are valued, and we prioritize your career development and growth. Essential Functions:, • Deed and reference map plotting, • Preparation and set-up of survey data for field crews, • Post survey field data analysis and/or conversions as necessary, • Construction layout calculations, as-built surveys, and/or sketches, • Grade sheet preparation, • ALTA/NSPS land title survey preparation, • Topographic analysis, • Preparation of Metes & Bounds descriptions, • Preparation of FEMA Elevation certificate, • Preparation of Subdivision Plans and Lot Consolidation Plans, • Oversee and mentor CAD Drafters – review plans prepared by CAD Drafters for accuracy, completeness, and conformance to company and client standards., • Assist and work directly with Assistant Project Managers and Project Managers, • Ability to create mapping from field crew data collector files (points), field sketches, digital photographs, and reference maps, • Accountable for plan presentation, • Survey traverse adjustments Knowledge, Skills, and Abilities: • 5-10+ years of surveying experience in AutoCAD Civil 3D, with a strong focus on office-based technical work, • LSIT preferred or equivalent, • Strong math skills., • Proven record of producing clean and accurate plan presentations., • Knowledge of field survey operations, engineering and construction industry., • Excellent organizational and communication skills., • Ability to learn new software and technologies in a timely manner., • Proficient with MS Word and Excel., • Ability to meet project deadlines within budget., • Self-starter with the ability to work independently and as a team member., • Desire to excel in a fast-paced work environment., • Ability to take and apply direction. Physical Requirements: • Prolonged periods sitting at a desk and working on a computer., • Light to moderate lifting may be required. *Reasonable accommodation may be provided for individuals with disabilities. Compensation and Benefits: • Pay Range: $30-40+ per hour depending on experience., • Additional Benefits: Health, dental, and vision insurance, life insurance, 401(k) match, paid time off, and more. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group. Powered by JazzHR LwU2SGOvja

Job Description IT Support Technician (Field & Client Services) Position Overview Atlantic-IT.net is seeking an IT Support Technician to provide onsite and remote support for our clients. This role is ideal for someone with 2-5 years of hands-on IT support experience who enjoys solving technical issues, working directly with end users, and traveling to client locations throughout the local area. Responsibilities • Provide onsite and remote technical support for client environments., • Troubleshoot and support Windows, Microsoft 365, Apple/Mac, and iOS devices., • Install, configure, and maintain desktops, laptops, printers, and mobile devices., • Assist with new user setup, workstation deployments, and technology upgrades., • Document work performed and maintain accurate service tickets., • Deliver excellent customer service while communicating effectively with clients., • Escalate complex technical issues when appropriate. Required Qualifications • CompTIA A+ Certification required., • 2-5 years of hands-on IT support experience., • Minimum 2 years of onsite/field support experience., • Experience supporting:, • Microsoft 365, • Windows operating systems, • Apple macOS, • iPhone/iPad (iOS/iPadOS), • Strong troubleshooting and customer service skills., • Valid driver's license and reliable transportation. Preferred Qualifications • Experience working for an MSP or supporting multiple client environments., • Familiarity with remote support tools and ticketing systems., • Microsoft or Apple certifications are a plus. Compensation & Benefits • $20-$28 per hour based on experience., • Full-time position., • Medical benefits., • Paid Time Off (PTO)., • Opportunities for training and professional growth. Additional Requirements • Ability to travel regularly to client sites throughout the local area., • Ability to lift and move technical equipment as needed. Target Candidate: A hands-on Help Desk Technician, Desktop Support Technician, or Junior Field Technician with 2-5 years of experience. This is not a senior-level engineering role and is best suited for someone looking to continue building their technical skills while supporting a variety of client environments. \nCompany Description Atlantic-IT stands at the forefront of technological innovation as an outsourced IT department and a pioneering technology company. Our mission extends beyond offering comprehensive IT services and support; we are dedicated to driving innovation, integration, and productivity across all technology products and solutions. Specializing in serving organizations without their own internal IT department, we ensure that technology strategies are aligned with and actively propel business goals forward. Our commitment to excellence has made us a trusted partner for a wide range of clients throughout the Tristate area. At Atlantic-IT, we don’t just manage technology needs—we revolutionize how businesses grow and protect their networks through cutting-edge solutions and strategic IT planning. Atlantic-IT stands at the forefront of technological innovation as an outsourced IT department and a pioneering technology company. Our mission extends beyond offering comprehensive IT services and support; we are dedicated to driving innovation, integration, and productivity across all technology products and solutions. Specializing in serving organizations without their own internal IT department, we ensure that technology strategies are aligned with and actively propel business goals forward. Our commitment to excellence has made us a trusted partner for a wide range of clients throughout the Tristate area. At Atlantic-IT, we don’t just manage technology needs—we revolutionize how businesses grow and protect their networks through cutting-edge solutions and strategic IT planning.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact The Advanced Solar Field Service Technician (Operations and Maintenance) in the PEARCE Renewables Solar Operations and Maintenance Division performs tasks involving physical labor at solar energy sites near New Brunswick, New Jersey. The Solar Field Service Technician is responsible for the operation and maintenance (O&M) of solar power plants in accordance with established preventative and corrective maintenance standards while always maintaining safety and professionalism. These are local sites-candidates should reside within 50 miles of the New Brunswick, New Jersey areas. Core Responsibilities • Conduct preventative and corrective maintenance of Solar Utility and Sub-Station equipment., • Responsible for documentation including, but not limited to, work orders, time logs, inventory control, and emergency information schedules., • Provide a working knowledge of troubleshooting electrical components with help and use of digital multi-meters, meggers, amp clamps, and similar equipment., • Testing/troubleshooting installed solar equipment and ensuring proper working order., • Must have a strong safety background with experience in Lock Out Tag Out (LOTO) and Job Hazard Analysis (JHA)., • Able work in a solo as well as a group environment., • Operate and maintain a motor vehicle safely and legally per the PEARCE Renewables Employee Handbook and insurance requirements. Specific duties may vary or evolve over time based on business and client needs. Core Experience • 2+ years' experience in Commercial/Industrial operations and maintenance (O&M) on solar power plants is preferred., • Preventative Maintenance experience on Solar Utility equipment is preferred., • Candidates should possess strong mechanical and electrical experience with troubleshooting and installation skills., • Specific solar experience with Inverters, Tracker Systems, or Sub-Stations Equipment (TMEIC/SMA/Sungrow/Nextracker/ATI, etc.) is preferred., • Takes initiative to escalate issues at site., • Ability to train, mentor, and develop laborers into Apprentices., • High aptitude and a strong work ethic are a must. Physical/Work Environment At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Must live within approximately 50 miles of the New Brunswick, New Jersey areas., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Employment may require working on weekends and holidays, including an "on call" service availability via telephone/text message., • Travel requirements dependent on support of the company (up to 25% travel). Compensation: $35.00-$60.00 hourly/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $35—$60 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Industrial Maintenance Technician Join a leading food manufacturing operation where your maintenance expertise will directly support equipment reliability, production uptime, food safety, and quality goals.

CONSIDERED EXPERIENCE INCLUDES: Maintenance Technician Mechanic Electrician Beverage Bottling Water Filtering Mixers Blenders Carbonators Automated Bottle Fillers Cappers Labelers Boxers PLCs HMIs Motors Rotary & Linear Motion Componenets Hydraulics Pneumatics #DiedreMoire #JobSearch #JobHunt #JobOp

Machine Assembler - Mechanic Join a growing industrial equipment manufacturing company as a seasoned Machine Assembler-Mechanic.This hands-on role works with large industrial mixers, dryers, process equipment, and mechanical systems while supporting assembly, troubleshooting, fabrication, and custom

Field of study: Bachelor's Degree required in Computer Science or Computer Engineering or Information Technology Management or Management Information Systems.

We’re seeking a Senior Engineering Technician to support new product development through hands-on RF testing, evaluation, and troubleshooting. Test new RF amplifiers and circuits, verifying performance against engineering requirements. Support prototype circuit builds, engineering test fixtures, a

Avenel, NJ Pay: $33-38/HR Shift: 5am - 1:30pm Tuesday - Saturday Maintenance Technician Lead JOB SUMMARY: A Capstone Logistics Technician is responsible for maintaining, troubleshooting, repairing, and installing equipment and facility systems to ensure safe and efficient operations. Minimum 1-2 yea