Trabajos environmental technology en Plainview, New YorkCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

2026 Canon Insights Summer Internship Account Executive Sales Intern (Tri-State Intern) US-NY-Melville Job ID: 34109 Type: Full-Time of Openings: 1 Category: Intern/Trainee CUSA Melville Headquarters About the Role 2026 Canon Insights Summer Internship Canon, U. S. A., Inc. is currently hiring for our 2026 Canon Insights Internship Program. The program will be held from Monday, June 1, 2026 - Wednesday, August 5, 2026. Canon is an innovative global digital imaging leader that uses technology to dissolve the barriers we face in the connections we build, the experiences we create, and even the lives we live. We are looking for passionate and experienced students to join the Canon USA team. This is a paid summer internship 10-week robust experience. What You’ll Do: • You will have the opportunity to gain hands-on work experience by participating in significant work projects that help you learn, develop business skills, and provide a meaningful contribution to Canon's business and goals., • You will be exposed to world-class teams and our business, marketing, and strategy initiatives through training, meetings, presentations, and other planned activities., • You’ll gain marketable skills and knowledge that you’ll need in transitioning into the workforce., • An undergraduate student who is currently a junior or will be entering their senior year as of the Summer 2026, pursuing a major aligned to the department of interest., • Have excellent written and verbal communication skills, strong computer skills, including advanced proficiency in Google Workspace., • A beautiful Headquarters facility, which has consistently received awards for its many modern amenities on a 52-acre campus., • Free coffee., • “Dress for Your Day” attire program – Casual dress, including jeans is permitted!, • Access to the on-site fitness center with locker rooms., • A dedicated peer buddy who will serve as a mentor during your internship experience., • Learning and professional development opportunities., • Opportunity to network with top-level Canon business leaders., • Exclusive training with industry leaders on Canon equipment., • Volunteer opportunities serving our local community., • Opportunity to participate in exclusive focus groups., • A chance to be featured on Canon’s social media sites., • #CanonIntern Swag! Award-Winning Culture: Canon has a unique culture and is committed to our core values of integrity, mutual respect, fairness, and communication. Our corporate philosophy is Kyosei - which we define as "all people, regardless of race, religion, or culture, harmoniously living and working together into the future." This is reflected in our welcoming, respectful, and family-oriented atmosphere with a strong focus on diversity & inclusion, work-life balance, and community and environmental initiatives. Your Impact 2026 Canon Insights Summer Internship – Account Executive Sales Intern (Tri-State Intern) Building long-lasting relationships is the foundation for any successful Sales Intern. It begins with knowledge and pitching the right product, solution, or service to help a customer overcome obstacles. It extends to ensure satisfaction is achieved throughout the life cycle of a deal. If you consider yourself a go-getter when it comes to sales, Canon USA, a pioneer in print technology, solutions, and services, wants to hear from you. We’re searching for an Account Executive Sales Summer Intern to jump right in and promote Canon’s hardware and software technology-based solutions to prominent companies within an established territory and assigned account list. The intern will work alongside the Business Partner Group (BPG): • Maintaining and establishing impactful business relationships with both new and existing customers., • Prospecting for new business opportunities and gaining new market share in an assigned territory., • Assisting with upgrading technology, solutions, and services with existing customers in an assigned territory., • Implementing creative sales strategies to meet customer needs., • Performing extensive customer analyses and site surveys at customer locations to satisfy needs., • Gaining valuable experience preparing proposals and presentations, researching business opportunities and attending customer meetings and product demonstrations., • Learning how to leverage various sales analytics and forecasting tools (SalesForce, PowerBI, ZoomInfo, Brainshark)., • Plus the opportunity to travel and rotate within the Tri-State area, visiting branches at the following locations: Melville, NY, New York, NY, Westchester, NY, and Roseland, NJ. About You: The Skills & Expertise You Bring A currently enrolled student pursuing a Bachelor’s degree as of the Summer 2026, in a discipline aligned to the department, bringing strong written and verbal communication skills and advanced proficiency in Google Workspace (Sheets, Docs, Slides, and Drive). • A currently enrolled student pursuing a Bachelor's degree in Business Management, Marketing, Sales or a relevant field., • Strong communication skills with the desire to build solid working relationships with a variety of businesses., • A hunger for learning new products, technology, concepts, solutions, and services in an evolving industry!, • The ability to work autonomously with excellent time management and leadership skills. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Posting Tags #PM19 #LI-MG1 #LI-HYBRID PIb3776ab262b0-37820-39871163

Contract Manager US-NY-Syosset Job ID: 2026-3280 Type: Regular Full-Time of Openings: 1 Category: Administrative/Clerical LiRo-Hill Overview Due to our continued growth, we currently have a need for a Contract Manager for our Syosset, LI Office. We are looking for a skilled and detail-oriented Contract Manager to join our team. The ideal candidate will be responsible for overseeing the review of contracts and determining risk to present to senior management to ensure compliance with organizational policies and legal requirements. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities • Review a wide range of public sector contracts and agreements, • Identify potential risks and work with senior management to resolve contractual issues as they arise, • Maintain accurate records of all contract documents and correspondence, • Collaborate with internal department Qualifications • Bachelor’s degree in Business, Law, or a related field, • Proven experience in contract management, • Strong analytical and organizational skills, • Excellent communication skills, • Proficiency in contract management software is a plus We are committed to your success, and we invest in your growth and development to unlock your full potential. • Competitive Total Compensation Package, • Employee- Only Stock Purchase Plan, • Mentoring programs, • Continuing Education Program, • Employee referral bonus, • Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. -We offer a comprehensive benefits package and a positive work environment -Compensation: Minimum: $110,000; Maximum: $130,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates’ qualifications and location. • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 PIf8c4b187ceac-37820-39937782

2026 Canon Insights Summer Internship - Logistics Intern US-NY-Melville Job ID: 34108 Type: Full-Time of Openings: 1 Category: Intern/Trainee CUSA Melville Headquarters About the Role 2026 Canon Insights Summer Internship Canon, U. S. A., Inc. is currently hiring for our 2026 Canon Insights Internship Program. The program will be held from Monday, June 1, 2026 - Wednesday, August 5, 2026. Canon is an innovative global digital imaging leader that uses technology to dissolve the barriers we face in the connections we build, the experiences we create, and even the lives we live. We are looking for passionate and experienced students to join the Canon USA team. This is a paid summer internship 10-week robust experience based in our Melville, New York Headquarters. What You’ll Do: • You’ll gain marketable skills and knowledge that you’ll need in transitioning into the workforce., • Free coffee., • “Dress for Your Day” attire program – Casual dress, including jeans is permitted!, • Access to the on-site fitness center with locker rooms., • A dedicated peer buddy who will serve as a mentor during your internship experience., • Learning and professional development opportunities., • Opportunity to network with top-level Canon business leaders., • Exclusive training with industry leaders on Canon equipment., • Volunteer opportunities serving our local community., • Opportunity to participate in exclusive focus groups., • A chance to be featured on Canon’s social media sites., • #CanonIntern Swag! Award-Winning Culture: Canon has a unique culture and is committed to our core values of integrity, mutual respect, fairness, and communication. Our corporate philosophy is Kyosei - which we define as "all people, regardless of race, religion, or culture, harmoniously living and working together into the future." This is reflected in our welcoming, respectful, and family-oriented atmosphere with a strong focus on diversity & inclusion, work-life balance, and community and environmental initiatives. Your Impact The 2026 Canon Insights Summer Internship – Logistics Intern will have the opportunity to gain handson experience across the Supply Chain environment throughout the 10-week program, the intern will contribute through a series of core department projects including: Vendor Compliance Chargeback: • Review/analysis/disputing, and reporting for major national retail accounts., • Leverage analytical skills to identify trends and root causes., • Perform data entry and analysis using Google Sheets., • Create PowerPoint slides summarizing findings and highlighting opportunities to prevent future chargebacks., • Drive efficiencies across Distribution Centers and enhance customer experience., • Participate in ongoing 2026 initiatives as timelines are finalized., • Assisting with group inbox management., • Provide support internally within the company, while learning how various Subdivisions work as one. About You: The Skills & Expertise You Bring An enrolled undergraduate student who is currently a junior and entering their senior year as of Summer 2026, pursuing a Bachelor’s degree aligned with the department of interest. A strong communicator—both written and verbal—with advanced proficiency in Google Workspace (Sheets, Docs, Slides, Chat, Calendar and Drive). Brings the ability to thrive as a collaborative team player while also working independently with confidence and enthusiasm. • Logistics, Supply Chain or Operations Management majors preferred, with experience or coursework focused on U.S. Domestic Operations., • Expertise in Google Sheets, Google Forms, and reporting., • Knowledge of Power BI is a plus., • Strong analytical, organizational, and problemsolving skills., • Ability to work independently and collaboratively in a team environment. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Posting Tags #PM19 #LI-MG1 #LI-HYBRID PIc1a2f20df509-37820-39926993

2026 Canon Insights Summer Internship Business Intelligence, Info Management & Digital Engagement US-NY-Melville Job ID: 34101 Type: Full-Time of Openings: 1 Category: Intern/Trainee CUSA Melville Headquarters About the Role 2026 Canon Insights Summer Internship Canon, U. S. A., Inc. is currently hiring for our 2026 Canon Insights Internship Program. The program will be held from Monday, June 1, 2026 - Wednesday, August 5, 2026. Canon is an innovative global digital imaging leader that uses technology to dissolve the barriers we face in the connections we build, the experiences we create, and even the lives we live. We are looking for passionate and experienced students to join the Canon USA team. This is a paid summer internship 10-week robust experience based in our Melville, New York Headquarters. What You’ll Do: • You’ll gain marketable skills and knowledge that you’ll need in transitioning into the workforce. Who You Are: • Team player and work independently. Perks & Benefits: • Free coffee., • “Dress for Your Day” attire program – Casual dress, including jeans is permitted!, • Access to the on-site fitness center with locker rooms., • A dedicated peer buddy who will serve as a mentor during your internship experience., • Learning and professional development opportunities., • Opportunity to network with top-level Canon business leaders., • Exclusive training with industry leaders on Canon equipment., • Volunteer opportunities serving our local community., • Opportunity to participate in exclusive focus groups., • A chance to be featured on Canon’s social media sites., • #CanonIntern Swag! Award-Winning Culture: Canon has a unique culture and is committed to our core values of integrity, mutual respect, fairness, and communication. Our corporate philosophy is Kyosei - which we define as "all people, regardless of race, religion, or culture, harmoniously living and working together into the future." This is reflected in our welcoming, respectful, and family-oriented atmosphere with a strong focus on diversity & inclusion, work-life balance, and community and environmental initiatives. Your Impact The 2026 Canon Insights Summer Internship Program – Business Intelligence, Info Management & Digital Engagement Summer Intern will particapte in the following key projects: Assisting with AI Model Development • Assist in building and optimizing machine learning models, ensuring they meet project requirements., • Participate in the preprocessing of datasets and data cleaning to improve the performance of AI models., • Perform research on current AI trends, technologies, and best practices to assist the team in staying up to date., • Assist in testing AI models to ensure they are functioning as expected., • Work closely with engineers, data scientists, and other teams to align AI solutions with business goals., • Maintain detailed records of AI experiments, model development processes, and results., • Assist in preparing reports and presentations summarizing the outcomes of AI research or experiments. About You: The Skills & Expertise You Bring The Canon Insights Summer Internship is a program designed for undergraduate students who are currently juniors or will be entering their senior year as of the Summer 2026, pursuing a major aligned to the department of interest, bringing strong written and verbal communication skills and advanced proficiency in Google Workspace (Sheets, Docs, Slides, Chat and Drive). • Preferred Major: Computer Science, Data Science, or a related major., • Experience: Previous coursework or projects related to machine learning or AI is a plus., • AI Knowledge: Understanding of supervised/unsupervised learning, neural networks, and NLP and GenAI fundamentals., • Mathematics and Statistics: Strong understanding of statistical methods, linear algebra, and calculus to develop and evaluate machine learning models., • Data Handling: Familiarity with data manipulation, cleaning, and preprocessing techniques., • Problem-Solving: Strong analytical thinking and problem-solving skills to troubleshoot and optimize models., • Communication Skills: Ability to clearly communicate findings, challenges, and solutions to team members., • Knowledge Base: Familiarity with algorithms, data structures, and advanced AI concepts. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Posting Tags #PM19 #LI-MG1 #LI-HYBRID PI9aa950b92280-37820-39910209

Sr. Mechanical Engineer/Project Manager US-NY-Syosset Job ID: 2021-2365 Type: Regular Full-Time of Openings: 1 Category: MEP The LiRo Group Overview We have an immediate need for a Sr. Mechanical Engineer (focusing on HVAC designs) for our Syosset, NY location. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities This role as Senior Mechanical Engineer will be focused on a mix of project types, everything from critical environment healthcare designs to energy performance work and large public infrastructure projects. The ideal candidate will have extensive experience designing and responding to the needs of multiple clients and projects simultaneously. Additional responsibilities will include: Lead the project team in the design and development of HVAC and MEP systems for commercial and institutional projects. Projects can include healthcare work such as operating rooms, CSS, pharmacies, in-patient hospitals, And outpatient facilities. Projects could also be Public Works, with clients such as DASNY, CUNY, NYS OGS, and NYCHA. Lead a team to conduct site surveys and assessments to gather data for system design and retrofitting.Collaborate with architects, clients, and other engineering disciplines to integrate HVAC and MEP systems seamlessly into building designs.Utilize engineering software such as AutoCAD, Revit, and HVAC load calculation tools to create accurate designs and calculations.Perform energy modeling and analysis to optimize system performance and ensure compliance with energy codes and standards.Provide guidance and mentorship to junior engineers and designers.Develop project design budgets and schedules.Stay updated on industry trends, advancement, and best practices in HVAC design and engineering. Qualifications Bachelor’s Degree in Mechanical Engineering, Master's Degree a plusProfessional Engineering (PE) license requiredMin 12 years of industry experienceProven track record of managing and designing multiple projects at the same time and meet deadlinesKnowledge of NYS / NYC / International Building Codes.Familiarity with Healthcare codes and standards is a significant plus Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. -We offer a comprehensive benefits package and a positive work environment -Compensation: Minimum: $120,000: $160,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates’ qualifications and location. • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 PI90e5f8ec272c-37820-27987400

Senior Project Manager (Healthcare) US-NY-Syosset Job ID: 2025-3069 Type: Regular Full-Time of Openings: 1 Category: Construction Management The LiRo Group Overview We are seeking a talented and experienced Senior Construction Project Manager in the Long Island area with experience overseeing high-profile healthcare projects with construction budgets exceeding $500 million. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities Serve as Point of Contact to Client and ConsultantsLead the project team as the Client’s On-site Representative for all project mattersProvide regular evaluation of project schedule and budget, identifying any deviations from plan and offering proposed solutions needed to meet project goalsProvide QA/QC oversight for internal project teamSupport project team with technical evaluations, advice, and guidance Qualifications Minimum 20+ years of successful construction project management experience with emphasis on major healthcare projectsBachelor’s Degree in Construction Management, Engineering, or related disciplineRecognized ability to lead and motivate both internal and project teams Strong communication skills at multiple project levels ranging from tradespeople to facility executivesDemonstrated project success in meeting project budgets and schedulesThorough understanding of ICRA/ILSM standards and protocols We are committed to your success, and we invest in your growth and development to unlock your full potential. Competitive Total Compensation PackageEmployee- Only Stock Purchase PlanMentoring programsContinuing Education ProgramEmployee referral bonusVolunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. -We offer a comprehensive benefits package and a positive work environment • Compensation: Minimum: $180,000 Maximum: $250,000. The range we provided is the salary that the Firm in good faith believes at the time of this position is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates’ qualifications and location, • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. Hill-LiRo l is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 180000-250000 Yearly Salary PI74eaa2095c25-37820-37123652

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Conduct railcar and train movements; signal crew members for movement of the engine or train using lantern, hand, and/or flag signals or radio to indicate when to start, stop, back up, or set or release air brakes, • Observe, interpret, and relay arm, lantern or radio signals and all other indications affecting movement of a train, • Operate track switches (visually check switch condition and direction) to change the direction of the engine or cars within yard limits or on the main railroad; apply or release hand brakes to switch or perform other duties, • Inspect the condition of the train and equipment in movement and while stationary, • Couple air connections between railcars and railcar movers when making up trains, • Assist with other projects and perform other duties as assigned, • Ensure compliance with all train orders, signals, and railroad rules and regulations for safety, operations, and the Federal Railroad Administration (FRA), • Monitor track conditions and report any issues, • Perform ER checks utilizing technology in the form of a tablet and/or computer for all arriving and departing trains, • Follow OSHA safety standards and wear required PPE Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • Ability to utilize technology in the form of a tablet and/or computer, • High school/GED education completed, higher education is a plus, • Must be able to lift/push/pull at least 50 pounds, • Minimum 1 year of rail conducting experience Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $20.00/Hr. Salary Range Maximum: USD $23.00/Hr.

CNC Programming Engineer We are looking for a CNC Programming Engineer to join our Target Rock team! As our CNC Programming Engineer you will interact with and support the machine shop production and personnel. The individual receives minimum direction from the Plant or Manufacturing Engineering Manager regarding methodology of manufacturing. The individual is responsible to generate methods in detailed format for Manufacturing Production. The individual will perform all necessary tool and fixture designs for both manufacturing and quality requirements. The individual will interact with both in-house manufacturing personnel, as well as vendor interaction in the support of all tool and fixture fabrication. The individual supports CNC Programming methods within our manufacturing facility. Location: East Farmingdale, NY Salary/hourly rate: $82,200 to $120,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge \n • Generates Operation Sheets to support all phases of manufacturing within the facility. \n, • Identifies and designs necessary tooling and fixtures required to support manufacturing processes.\n, • Interacts with in-house and vendors in support of manufacturing components, as well as tool and fixture fabrication.\n, • Performs quotations for pricing inquiries, as well as manufacturing budget review for manufacturing processes.\n, • Maintain all applicable manufacturing project documentation.\n, • Additional responsibilities as assigned by Supervisor.\n, • Assists in the training of shop personnel to optimize defined manufacturing processes.\n, • Must be a US citizen\n, • Associate Degree minimum in Manufacturing/Mechanical Technology or equivalent related field or a commensurate level of related experience.\n, • 5 to 10 years experience performing manufacturing engineering responsibilities, inclusive of manufacturing methods, tool and fixture design, and budget and cost analysis. \n, • Working knowledge of Mastercam CAD/CAM software version 8.xx or greater.\n, • Ability to methodize complex parts with minimum supervision. Knowledge of machine shop practices and techniques.\n, • Design and overview tool and fixturing requirements for manufacturing components.\n, • Knowledge of raw materials and related machinability. Ability to define applicable feeds - speeds combinations for established manufacturing process.\n, • Ability to generate CAD drawings.\n, • Capable to analyze manufacturing equipment or tooling problems to efficiently implement solutions to economically solve these production problems in a timely manner.\n, • Broad knowledge of computer-controlled machine tools.\n Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Since its inception in 2004, M&J has grown into a diversified provider of engineering, construction management, construction inspection, technology, and environmental services to a broad range of clients, including federal, state and city/local agencies, private owners, architects, engineers and con

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. Veolia helps commercial, industrial, healthcare, highe

Job Description Company: The Davey Tree Expert Company Locations: Hicksville, NY Additional Locations: NA Work Site: On Site Req ID: 220572 Position Overview Invest in your future. Join one of the largest employee-owned companies in the nation! Davey has a unique culture that focuses on the open exchanging of ideas, community partnerships, a commitment to safety and delivering unrivaled client service while acting as industry leaders in horticultural and environmental services. We are currently looking to add a dynamic Lawn and Landscape Technician to our passionate team of tree care professionals. Your office is outdoors, and you get a new view every day! Job Duties What You’ll Do: • Cultivate your career and fertilize your future!, • Properly applying weed control/herbicides/fertilizer and so much more., • Communicate and educate the client regarding the diagnosis and the prescribed pest control, aerification and fertilization service(s) with customers., • Continuously monitor lawn quality and fertilizing methods after application and communicate progress to customers and supervisors., • Love of the outdoors, • 1-2 years of landscape experience, • Preferred: Background in Forestry, Horticulture, Landscaping, or working at heights, • Ability to complete the Davey Tree Trimmer Orientation Program upon hire, • Paid Time off and paid holidays, • Opportunities for advancement, • All job specific equipment and safety gear provided, • Group Health Plan, • Employee referral bonus program, • Locations throughout US in major cities and desirable areas The Davey Tree Expert Company provides research-driven tree services, grounds maintenance and environmental consulting for residential, utility, commercial and environmental partners in the U.S. and Canada. We care about our clients, each other and the world around us. We offer the resources, size and stability of a big company while maintaining the culture, entrepreneurial spirit and feel of a small one. We invest in our employees by offering industry-leading training, technology and benefits that lead to a rewarding and safe work experience at all levels. Wherever you want to grow your career, there’s a place for you at Davey. To learn more, visit Davey.com. Accommodations: If requested by employee or otherwise as required by law, reasonable accommodations will be made to enable employees with disabilities to perform essential job functions. If you need assistance at any time, please contact us at 1-877-411-7601 or at . Employment Type: Permanent Job Type: Full Time Travel Expectations: None

Job Description Schivo Medical in Plainview, New York manufactures a diverse range of essential medical technology solutions. Working with us, you will be apart of the manufacturing process of a vast array of different products including robotic surgery instruments medical devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will work with a team of professionals that are committed to helping create parts that save lives and help assist you with a fulfilling and rewarding career. Senior Manufacturing Engineer job summary: A Manufacturing Engineer is responsible for designing, implementing, and reviewing the procedures and equipment involved in the manufacturing process. Their duties include researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Senior Manufacturing Engineer Necessary Education, Skills, and Competencies (including licensing and certifications): • 10 years of work experience as a manufacturing engineer or similar role needed, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g. CAD, MS Office), • Project management skills, • Problem-solving ability, • Teamwork skills, • Degree in Mechanical Engineering or related field(CNC Machining), • Green belt certificate a plus, • Working knowledge with continuous improvement process Senior Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, test, and implement manufacturing process., • Study production and machine requirements, • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Develop and mentor Junior engineers, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with new technology Benefits: • Employee referral, • 401(k), • 401(k) matching, • Dental insurance, • Vision insurance, • Life Insurance, • Employee assistance program, • Health insurance, • Paid time off, • Referral program * Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job DescriptionDescription: The Academy Charter Schools offers an exceptional interdisciplinary curriculum in a technology-rich environment that challenges students to explore connections across subjects and use experiential learning to bridge the gaps between theory and practice. The Academy’s focus on character development and community service cultivate a student body poised to be active, engaged and responsible members of the community. The Academy employs a committed staff whose teaching and high academic and behavioral expectations will promote the excellence known so the community’s children can achieve. Under the supervision of the school principal, provides counseling services for students manifesting social, emotional, behavioral and/or learning difficulties which interfere with the students’ capacity to be successful in school. He/she works with the parents, teachers, other school personnel, outside agencies and the community to modify those aspects of the environment which interfere with positive school adjustments and healthy development. Responsibilities • Identifies and assesses learning and behavior problems, including factors in the school environment contributing to student problems., • Identifies, assesses and when warranted and possible, modifies social-emotional, cultural, economics as well as other environmental factors impacting negatively on a child’s success in school., • Incorporate students’ parents as partners in the learning process. Keep parents apprised of student’s progress, attitude and behavior. Keep scheduled appointments and be accessible to parents when they have questions, • Chair academic conferences with parents i.e. promotion in doubt, • Counsels students individually and in groups., • Provides consultation with school staff and parents concerning the growth and development of individual students., • Collaborates with school staff including other mental health providers assigned to respective schools., • Collaborates with special education teacher and serves on as a liaison with CSE., • Provides mandated workshops on child abuse and child neglect to all school staff., • Serves as an advocate for children and for parents around issues that are negatively impacting a child’s success in school., • Liaisons with various agencies (DSS, DJJ, etc.) and institutions (churches, universities, etc.) in order to assist in effecting positive change for students and families that will translate into improved school adjustment and achievement for the child., • Monitors school climates and finds ways of positively impacting that environment for children., • Serves as a member of Crisis Intervention Teams., • Provides group counseling, educational workshops, and other services to parents on topics such as parenting, stress reduction Pay Transparency: The salary range for this role is $ 62,500 - $98,000. Base pay offered may vary within the posted range based on several factors, including but not limited to education, job-related knowledge, skills, experience, and location. The Academy is committed to pursuing and hiring a diverse workforce and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of any characteristic protected by applicable federal, state or local law. Requirements: Qualifications: • NYS Certification in School Counseling required., • Masters Degree in School Counseling required, • Very strong communication and interpersonal skills required, • Excellent written and oral communication skills, • Ability to interact successfully with all levels of school personnel, students and parents, • Ability to liaise with community agencies, • Demonstrates abilities/strategies to reduce inappropriate, student behaviors and improve classroom or school climate

Job DescriptionDescription: JOB TITLE: RF Technician Job Summary: As a RF Technician, you will perform advanced RF/Microwave system testing, trouble shooting, and electro-mechanical diagnostics for sub-assemblies and high-level system assemblies. This ideal candidate possesses exceptional troubleshooting skills in RF technology and Analog/Digital circuits, with the ability to work independently or collaboratively in a dynamic environment. Key responsibilities: · Conduct testing and troubleshooting of RF/Microwave sub-assemblies and upper-level assemblies according to system specifications. · Develop test procedures and create documentation, including Data Sheets and Acceptance Test Procedures (ATP) · Perform evaluation, acceptance, and sell-off testing in compliance with in-house QA standards and government audits. · Assist in reverse engineering of RF based products and generate schematics from existing circuits. · Utilize commercial test equipment, including Spectrum Analyzers, Vector Network Analyzers, Power Meters, and Oscilloscopes, with proficiency. · Calibrate, maintain, and repair electronic test equipment and oversee the upkeep of the Environmental Testing Facility assets. · Maintain and manage the computerized calibration database for IM & TE (Inspection, Measuring and Test Equipment) assets. · Recall IM & TE due for calibration to ensure operational accuracy and compliance. · Work independently and as part of a team with minimal supervision to meet project deadlines and deliver high-quality results. · Collaborate with engineering team to resolve technical challenges and optimize performance. Required Qualifications: · Associate’s degree in Electrical Technology/Electronics or equivalent · Extensive experience (7+ years) in a fast-paced repair or production environment may be considered in lieu of formal education. · Proficient in the use of advanced RF test equipment, including Spectrum Analyzers, Vector Network Analyzers Power Meters and Oscilloscopes. · Experience in developing and documenting test procedures. · Strong analytical, organizational and communication skills. Preferred Qualifications: · Familiarity with ESD handling protocols and production safety standards. · Experience with Power Amplifiers and Low Noise Amplifiers. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job DescriptionThe Safety and Training Manager trains and evaluates new hire employees on company policies and procedures as well as industry practices with respect to operations. This position conducts annual recurrent training, maintains training files, and oversees the site’s training and safety programs, ensuring compliance with the company’s policies and practices as well as industry standards. * Base salary: $62,000–$66,000k * Annual performance bonus eligibility * Medical, dental, vision coverage Headquartered in Plano, Texas, Atlantic Aviation welcomes customers at more than 100 fixed base operator (FBO) locations – from the Hawaiian Islands to Caribbean islands and all points in between throughout the US. We offer a wide range of aircraft ground handling and flight hospitality services, including fueling and line services, hangar and ramp storage, modern executive terminals for passengers and crews, and much more. We are firmly committed to diversity, equity, and inclusion throughout our network and aspire to be the employer of choice in our dynamic segment of aviation. We invest in enhancements to our safety, service, technology, and strategic infrastructure in order to provide more choices, improved experiences, and better value for customers. Atlantic Aviation intends to lead the way to a more sustainable future for business and general aviation. Atlantic Aviation is “local everywhere” - providing a safe, friendly, and familiar experience across North America. To learn more about Atlantic Aviation or to make a reservation at any of our 100+ FBOs, visit AtlanticAviation.com. Website Duties and responsibilities include (but not limited to): • Maintain site practices and procedures that contribute to a safe, profitable, positive, and enjoyable work environment through regular safety meetings, training and consistent communication between staff and management while applying the “Atlantic Attitude’ at all times., • Foster a work culture based on Atlantic values with an emphasis on safety by demonstrating continuous effort to improve operations, by promoting safe work practices, decreasing safety violations, reducing injury rates, and working cooperatively and jointly to provide quality customer service in a positive and professional manner., • Administer and monitor Atlantic Training and Safety Plans including industry and company programs. Teach compliance with all company and regulatory agency policies and procedures to Line Service Technicians under Training., • Train, coach, evaluate, and develop new hire employees in accordance with established procedures. Conduct annual recurrent training of all employees with the Atlantic Training Plan., • Analyzes and evaluates training requirements. Researches, writes, and creates new training materials based on facility needs., • Evaluates and updates training programs to keep current with new techniques, and aircraft manufacture recommendations. In addition, monitor the FlightDeck, Team Site, and other publications for training updates., • Distribute, and document distribution, of all prescribed company training and safety materials., • Write and distribute local safety and training notices as directed by the General Manager., • Conduct regular safety and environmental site audits to ensure compliance with applicable policies, procedures, and laws., • Maintain site training records and internal quality assurance inspections., • Communicate safety and training issues to the General Manager., • When needed, perform all duties and responsibilities of a Line Service Technician or Customer Service Representative, as needed., • Be qualified to operate all aircraft ground support equipment as needed., • Conduct post-accident/post-incident safety reviews of practices and employees involved. Report findings and make recommendations to the General Manager on appropriate level of discipline., • Assist Line Service Supervisors in performance improvement plans for underperforming employees and provide correction action recommendations to General Manager., • Procure, inventory, and distribute personal protective equipment to Line Service personnel., • Actively monitor Line Service performance and develop group training sessions as needed., • Assist in the preparation of the OSHA 300 log., • Communicate good housekeeping practices and uniform standards to new hire employees., • Initiate emergency and incident response procedures as required., • Be thoroughly familiar with Spill Reporting requirements and immediate action procedures.Required SkillsEDUCATION AND QUALIFICATIONS, • Two (2) years of Line Service experience., • Completion of an OSHA” Industrial Safety” 10 or 30 Hr course., • Valid state driver’s license and at least 18 years of age., • Must be eligible, willing, and successfully complete company-approved aircraft towing certification within first 90 days of employment., • Atlantic Line Service Supervisor Training the Trainer Certification., • Aptitude in supervising and developing staff., • Good communication skills, both written and oral., • Good organizational skills., • Basic proficiency in Microsoft Office applications including Word, Excel and Outlook.

Job DescriptionDescription: BACKGROUND SUMMARY: The Academy Charter Schools offers an exceptional interdisciplinary curriculum in a technology rich environment that challenges students to explore connections across subjects and use experiential learning to bridge the gaps between theory and practice. The Academy’s focus on character development and community service cultivate a student body poised to be active, engaged, and responsible members of the community. The Academy employs a committed staff whose teaching and high academic and behavioural expectations will promote the excellence known so the community’s children can achieve. JOB SUMMARY: The High School Social Worker will serve as a liaison between scholars, school personnel, families, and outside resources for both the Uniondale and Hempstead High Schools. They will be responsible for providing intensive counseling to students with significant social, emotional, and behavioral challenges. This person will also assist students with academic learning by providing strategic services that identify and address issues that interfere with the educational process. The Social Worker will also lead the alumni engagement initiative which will provide ongoing support and guidance to our High School graduates and their families. ESSENTIAL DUTIES AND RESPONSIBILITIES: Social Work • Counsel students with personal and psychological issues that affect their performance, socialization, and behavior in school., • Provide counseling sessions, treatment plans and workshops to establish prevention programs and intervention plans., • Assist teachers by communicating with students to find the causes of their behaviors, • Provide support to students and families suffering from hunger, abuse, homelessness by providing access to resources for shelters, food banks and medical care., • Analyze information gained through record reviews and interviews to determine environmental impacts and appropriate resources needed; integrate gained information into a written report., • Develop and implement professional development training for educational staff and parents., • Participate in professional development activities aimed at current trends and best practices for the provision of comprehensive school social work services., • Maintain an ongoing liaison with community agencies and other resources to meet student needs; refers parents and student to agencies when appropriate. Pay Transparency: The salary range for this role is $62,500 - $83,000. Base pay offered may vary within the posted range based on several factors, including but not limited to education, job-related knowledge, skills, experience, and location. The Academy is committed to pursuing and hiring a diverse workforce and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of any characteristic protected by applicable federal, state or local law. Requirements: CORE COMPETENCIES: BUILDING RELATIONSHIPS • Communicate effectively, • Challenge each other intellectually, • Show gratitude, • Solve conflicts peacefully, • Respect each other's differences, • Be positive and supportive of each other, • Demonstrate a strong work ethic, • Use your time wisely, • Listen actively, • Be punctual and prepared, • Be organized, • Be reflective, • Be reliable, • Take initiative, • Master’s degree in Social Work, • Current License and Certification to practice Social Work, • Strong communication and interpersonal skills

Job Description Hazen and Sawyer is seeking an experienced Principal Architect to lead architectural design efforts across our Northeast Region and support the expanding needs of our clients in the water and wastewater sector. In this architectural leadership role, you will guide and elevate the architectural components of multidisciplinary project teams—overseeing design quality, technical rigor, and integration—while contributing to the planning, design, permitting, and construction of facilities that support and protect critical water infrastructure. The Principal Architect will oversee a diverse portfolio of projects within the “water space,” including but not limited to: • Drinking water and wastewater treatment facilities, • Water resource and conveyance structures, • Associated buildings such as administrative spaces, laboratories, and operational support facilities A sample of Hazen’s Architectural Design can be viewed on our website: Hazen and Sawyer | Architectural Design Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Lead architectural design from schematic development through construction‑ready documents, ensuring precise technical detailing, appropriate material selection, construction sequencing, and high‑quality specifications., • Review, refine, and integrate architectural details to ensure constructability, clarity, durability, and full alignment with project goals and standards, • Collaborate with engineering, estimating, project management, and field staff to produce fully integrated and constructible designs., • Coordinate with consultants, AHJs, and code officials to ensure regulatory compliance with construction requirements., • Conduct existing conditions assessments and prepare design and technical reports for water and wastewater treatment projects., • Lead renovation, adaptive reuse, and historic restoration efforts, including evaluation of structural and architectural integrity, preservation of architectural features, and integration with modern building systems., • Perform construction administration tasks, including submittal review, responding to RFI’s, site inspections, and field clarifications., • Bachelor of Architecture or BS in Architectural Technology degree from U.S. accredited university, • NYS Registered Architect or NCARB Certification, • 8-10 years of architectural experience with a strong emphasis on detailing and constructability for infrastructure or public works projects, • Demonstrated experience with public bid projects, including budget, schedule, and quality oversight., • Deep understanding of building systems integration (Architectural, Structural, MEP, Civil)., • Proven ability to develop technical, constructible details and understand construction methods and materials., • Proficiency with building codes, environmental regulations, and sustainable design principles., • Strong leadership skills and ability to coordinate effectively with multidisciplinary teams., • Hands-on experience in construction administration and field coordination., • Ability to identify and resolve constructability and detailing issues early in design., • Strong technical writing and communication skills to clearly convey design intent., • Experience with building renovations, rehabilitations, or historic preservation projects., • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of the Operations Supervisor, Operations Lead Personnel and in coordination of fellow Operations Personnel the incumbent will perform a variety of basic tasks relevant to the day-to-day operation of the wastewater treatment plant facilities, processes and equipment, including process and equipment rounds, recording operations data and information, making observations and reporting on variations in operating conditions, maintaining logs and other required reports and forms, and provides input for corrective actions and implements corrective actions as directed. Assist Operations in efforts to maintain efficient and cost-effective facility operations while maintaining compliance with all Corporate and Regulatory environmental, health and safety rules and requirements. Primary Duties/Responsibilities: • Works a scheduled shift and will be subject to required emergency call in or shift coverage as Operational needs demand., • Under the direct Supervision of Shift Supervisor or Lead person may be required to perform some of the following tasks depending on the station assigned for that shift:, • Record and Read meters for (pumps, gauges, motors etc.…) in accordance with all regulatory requirements., • Record tank levels, sludge blanket levels., • Operate equipment pertinent to assigned workstation (GBT, BFP, overhead lifting jib crane, pumps), • Open, close and adjust valves for tanks & pumps., • Observe their process areas (pumps, motors, valves, sewage color, odor, flow) record their findings., • Collect samples for laboratory analysis., • Receive chemicals in bulk, drum and tote form., • Adjust / bleed pumps as directed., • Keep the workstation and surrounding area safe and clear of debris., • Inspect equipment for proper functionality and refer to Maintenance for any necessary repairs., • Maintain a logbook for the station they are operating., • Create work requests for equipment found to be malfunctioning or broken., • Make adjustments to equipment to optimize the operation (GBT & Dewatering)., • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gases, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Requires good reading, math, writing, and verbal communication skills., • Ability to read, and record data from meters, gauges, scales, panels, computer consoles, and other equipment., • Ability to understand/execute written and oral instructions, read/understand technical instructions., • Ability to interpret data and information from technical service manuals and drawings., • Knowledge of Windows, Google Workspace, MS Office Suite, and other computer-based systems., • Knowledge of basic laboratory sampling, testing and documentation., • Ability to adjust chemical feeds and processing equipment as directed to maintain compliance., • Basic knowledge of wastewater treatment equipment and processes., • Must have the ability to maintain effective working relations w/management, supervisors, and staff., • Must be able to work as a team in a teamwork-oriented environment., • Must be safety conscious and able to work independently with little or no supervision., • Valid NYS Driver’s license and the ability to meet risk management guidelines., • Possesses valid NY State Class 1A Wastewater Treatment License is preferred or ability to attend classes required for obtaining valid NY State Wastewater Treatment license and obtain license within 24 months. Additional Information Pay Rate: $22.91 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Looking for a lifetime career? Apply today! Job Description S1B Power Plant Mechanical and Technology is looking for an Associate Engineer to join our team supporting delivery of the COLUMBIA Class. For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technolog

Strong understanding of technology and business productivity systems.

For nearly 70 years, the Naval Nuclear Laboratory has developed advanced nuclear propulsion technology, provided technical support, and trained world-class nuclear operators to ensure the safe and reliable operation of our nation's submarine and aircraft carrier Fleets.

Product Development Project Manager.Garden City, New York (Office Based).Talento has partnered with one of North America's leading vertically integrated manufacturer of sexual wellness products.We are looking for a highly skilled.Product Development Project Manager.This person is highly organized an

Act as a liaison between technology and business departments and be the intermediary who help support and translate needs across business units and functions and an end to end project driver. Conduct business process modeling and generate applicable scenarios for the technology functionality testing

Data Entry / Remote] - Anywhere in U.Competitive pay - As a Data Verification Analyst at Foundation AI, you will: Process, segregate, review, and validate data provided in various formats according to changing process requirements; Prepare, compile, and organize documents for data capture, ensuring

Position Summary: The Project Manager will be working on the DTD team ; Data Analytics, Technology and Digital Products (DTD) supporting an enterprise-wide data migration program to the strategic Snowflake Data platform. Project Manager role is responsible for organizing and guiding successful imple

Construction or Environmental Management, plus.

Applicants must have prior experience working in an HVAC subcontractor office.Candidates without relevant HVAC subcontractor experience will not be considered.Minimum of 3 years of HVAC industry experience.Minimum of 3 years of construction experience.Minimum of 3 years of project management experie

Project Manager for Epic Systems Revenue Cycle.We are seeking a highly skilled and experienced Project Manager to join our Project Management Office (PMO) within the IT department.The ideal candidate will have extensive experience in front and back-end revenue cycle workflows and Electronic Health R

We are always keeping an eye out for applicants who are friendly, enthusiastic, and who genuinely enjoy serving guests.To be successful in this role, you should have previous experience in a customer service position and good knowledge of how cash registers operate.You should also be available to ta

At CEC Entertainment, we build careers around great food, family, and fun! Our purpose and our passion is to create the best place for kids and families to eat and play!.Work Today, Get Paid Tomorrow" program.Don't wait between paychecks anymore!.Cheese (CEC) is a great place for a first-time job se

Restaurant Team Member - Cashier.At Panera, our people come first.If you're looking for a place where you can grow, feel supported, be yourself, enjoy great perks, and have a little fun along the wayyou're in the right spot.We're here to help you succeed every day, in every way.Get ready to rise and

As a Cashier you are accountable for the customer service and sales experience including: maintaining checkout standards; assisting with general operations such as Omnichannel, recovery and inventory; and upholding performance standards relative to shrink/safety and meeting performance standards ass

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Integrated Construction, Design and Technology Solutions”.

Working Conditions: Environmental factors vary by location.

Cashiers play a critical customer service role by providing customers with fast, friendly, accurate and safe service.They process Checkout and/or Return transactions, as well as monitor and maintain the Self-Checkout area.They proactively seek product/project knowledge to provide customers with info

Our Guest Service Associate will be responsible for driving top notch guest experience while facilitating the completion of all store-level tasks.At Global Partners, business starts with people.Since 1933, we've believed in taking care of our customers, our guests, our communities, and each otherand

Provide prompt and friendly service to customers in a way that will exceed customer expectations and ensure customer satisfaction.Follow procedures to prepare, pack and serve food products for customers, maintaining the highest level of product quality and cleanliness.The cashier we would like to em