Environmental technology jobs in Plainfield, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

Junior Civil Engineer US-NJ-Edison Job ID: 2025-3233 Type: Regular Full-Time of Openings: 1 Category: Civil/Structural Engineering LiRo-Hill Overview We have an immediate need for a Junior Civil Engineer to join our fast-growing team in our Edison, NJ office. This position offers the opportunity to work on roadway, bridge and transportation-related projects, while working within a collaborative, multidisciplinary environment. This role offers hands-on experience and direct mentorship from senior engineers, with the opportunity to see projects through from initial investigation and design to construction. Ideal for an engineer who is eager to learn, take on responsibility, and grow within a collaborative team environment. Come join our team! We are looking to build services and capabilities through the growth of our key asset - our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to be a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities • Perform a wide range of civil engineering analysis and design tasks including but not limited to: site planning, roadway and utility design, ADA compliance, grading design, and stormwater management, • Assist in site investigations and condition assessments to document existing conditions, • Perform site inspections for work engineered by our office, • Complete and review design calculations; assist in the preparation of drawings and specifications, • Provide responses and solutions to issues during the construction administration phase of projects, • Support the permitting of projects with local jurisdictions and environmental agencies, • Coordinate work product with other in-house engineering staff and architects, • Utilize a broad assortment of skills on projects that range from small municipal projects to large scale commercial land development projects, • Attend professional industry functions Qualifications • Bachelor of Science in Civil Engineering, • 0-5 years of related experience, • EIT preferred, • Prior experience with NJDOT standards is a plus, • Understanding and application of code requirements, • Strong verbal and written communication skills, • Experience in using various civil/analysis software, • Ability to manage multiple tasks and meet deadlines, • AutoCAD experience a requirement, Civil 3D experience a plus We are committed to your success, and we invest in your growth and development to unlock your full potential. • Competitive Total Compensation Package, • Employee- Only Stock Purchase Plan, • Mentoring programs, • Continuing Education Program, • Employee referral bonus, • Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $75,000; Maximum: $95,000 The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined on the individual candidate’s qualifications and location. #ID22 #ZR22 #LI-Hybrid PIe4ec7fa21e06-37820-39286356

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Conduct railcar and train movements; signal crew members for movement of the engine or train using lantern, hand, and/or flag signals or radio to indicate when to start, stop, back up, or set or release air brakes, • Observe, interpret, and relay arm, lantern or radio signals and all other indications affecting movement of a train, • Operate track switches (visually check switch condition and direction) to change the direction of the engine or cars within yard limits or on the main railroad; apply or release hand brakes to switch or perform other duties, • Inspect the condition of the train and equipment in movement and while stationary, • Couple air connections between railcars and railcar movers when making up trains, • Assist with other projects and perform other duties as assigned, • Ensure compliance with all train orders, signals, and railroad rules and regulations for safety, operations, and the Federal Railroad Administration (FRA), • Monitor track conditions and report any issues, • Perform ER checks utilizing technology in the form of a tablet and/or computer for all arriving and departing trains, • Follow OSHA safety standards and wear required PPE Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • Ability to utilize technology in the form of a tablet and/or computer, • High school/GED education completed, higher education is a plus, • Must be able to lift/push/pull at least 50 pounds, • Minimum 1 year of rail conducting experience Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $20.00/Hr. Salary Range Maximum: USD $23.00/Hr.

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader.It offers a full spectrum of water, waste, and energy m

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE This position will be responsible for providing inspection and technical program support for equipment inspection, test, and repair portions of the overall Mechanical Integrity/Quality Assurance effort. The role will primarily focus on the Morses Mill (Linden, NJ) site, while also being integrated and part of the Acid Technology Center which provides support to all of the NEXPERA sites. The site produces Sulfuric Acid. The role will reside at the plant site and reports to the Asset Manager. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Develop/Authorize/Maintain and implement standardized inspection plans for all PSM Critical Equipment, including pressure vessels, process vessels, heat exchangers, piping, storage tanks, and other equipment., • Perform equipment inspection in accordance with API 510, API 653 and API 570 guidelines and regulations., • Complete post inspection reports and provide recommendations and/or modifications for immediate concerns and future consideration., • Develop, implement and document repair plans for fixed equipment, • Perform field contract administration duties during field repairs of equipment, • Standardize, organize, and maintain required documentation (design bases, inspection plans, inspection reports, etc.) in accord with corporate and site MIQA best practices., • Update SAP and equipment files with equipment history, Inspection Plans., • Ensure that all inspections and tests are performed in accordance with the original equipment design basis and in alignment with recognized and accepted good engineering practice (RAGAGEP)., • Ensure that all repairs to fixed PSM Critical Equipment is documented in accordance with OSHA 1970.119, • Evaluate the fitness-for-service of all fixed PSM Critical Equipment and assist other Technical/Maintenance resources in properly developing and documenting any repairs to return the equipment service., • Perform necessary calculations required within the RAGAGEP to determine the minimum allowable thickness of pressure vessels, piping, and tanks in PSM Critical service., • Provide functional guidance to NEXPERA and contract NDE Examiners, • Evaluate results of various non-destructive inspections on process equipment and provide recommendations based on those inspection results, • Act as an the Authorized Inspectors for PSM Critical pressure vessel, piping, and storage tank inspections and tests, as well as for approval of all alterations to PSM Critical pressure vessels, piping, and storage tanks., • Manage & Implement the Corrosion Monitoring program PSAIM® for the sites, • Coordinate contract NDE inspections and perform Field Contract Administrator responsibilities, • Develop Quality Assurance Plans for fabrication of new equipment (ex. tanks, pressure vessels, piping, etc…), • Perform/coordinate QA inspections of new equipment on site and at shop locations., • Estimate equipment remaining life per the applicable RAGAGEP., • Maintaining the site Owners User Manual as applicable., • Perform UT and PT on an as needed non-routine basis (NEXPERA will provide training if not certified) Qualifications In order to be qualified for this role, the following is required: • 3 plus years work experience within high hazardous chemical processing or oil refining industries or similar industries, • At least 2 out of 3 of the following certifications: API 510, API 570, API 653, • Able to travel approximately 30-40% per year, • Successful candidates must be able to perform the essential functions of the job with or without accommodation. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Our Pest Control Technicians work closely with residents and supervisors at multi-family housing to tackle pest problems and put our customer's mind at ease. As a Pest Control Technician, you will identify pest problems and recommend pest control programs using your expertise and the latest in pest control technology. You will communicate procedures, sanitation and structural corrections with residents and management supervisors all while providing the highest-level quality of service. Essential duties and responsibilities: • Inspect and treat for pests, pest harborage, and pest entries., • Follow all safety procedures and instructions throughout every step of the process., • Travel to residences and apartment complexes and inspect for pests., • Build and maintain customer relationships., • Maintain your vehicle and all equipment at a high standard of cleanliness and maintenance., • Complete all paperwork and route logs accurately and timely., • Respond to customer and client requests in a timely manner., • Maintain high service standards at all times., • Take personal initiative and responsibility for correcting pest problems., • Suggest and sell services that meet customer needs., • Participate in group meetings and account reviews., • Complete ongoing independent and group training., • You have previous outdoor working experience including maintenance, construction or other physical work experience., • You have 6 years of driving experience with a clean driving record., • You can pass a pre-employment screenings and checks., • You can satisfactorily complete initial technical training and State Certification and Licensing requirements., • You will participate in regular in-house workshops to improve your skills and learn new methods and techniques., • You are comfortable working with insects and various animals in a variety of environmental conditions and confined spaces., • You can perform the physical requirements of this role including standing, walking, climbing, lifting, bending, reaching, crawling, squatting and moving around., • You work well independently and as part of a team., • You communicate effectively, both orally and in writing., • You have a team mentality with the ability to work independently., • You are reliable and punctual for all work assignments., • Education and /or experience:, • High School diploma or General Education Degree.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology. About Bestzyme Founded in 2013, Bestzyme is driven to harness the power of biotechnology to accelerate sustainable and efficient solutions for biofuel, food & beverage, distilling, starch, household care, textile, animal feed industries and functional proteins. At Bestzyme, we're committed to accelerating sustainable and efficient industrial solutions to meet the demands of our evolving world. We understand the importance of nurturing science not just for today, but for preserving tomorrow. Our aim is to help make people and nature thrive in harmony through the incredible power of biotechnology. We believe in the strength of collaboration to foster industrial growth and environmental sustainability. For more details, please refer to our website: Position: Senior Sales Manager (Sweet Protein) Location: United States – Remote The estimated salary range is $100,000 - $120,000 based on experience level. Key Responsibilities： 1. Execute the business strategy and annual plan developed by the department, focus on business opportunities and organize resources to achieve annual sales budget and profit budget., 2. Build and maintain strong relationships with potential customers and partners through proactive communication and regular visits to discuss commercial opportunities in full autonomy, 3. Maintain and continuously improve understanding of products, applications and markets. Share the insight and knowledge with internal team to optimize product development, 4. Collaborate with cross-functional teams (including technical and production teams) and responsible for driving sales and business development efforts in North/South America to achieve sustainable growth in the food ingredient line., 5. Working with customers and partners to generate market insight of customer needs and industry trends to support build market strategy for new product launch., 6. Complete temporary important tasks assigned by superiors. Qualifications： 1. Bachelor degree or above and minimum 5 years of relevant B2B sales or business development experience in food ingredients, food & beverage, sweetener or flavor ingredient industry;, 2. Proven expertise in key account management and channel development; Excellent negotiation and communication skills; High level of autonomy and the ability to work independently;, 3. Proven success in building relationships with professionals at all organizational levels with internal and external customers; Able to better grasp the customer's psychology, understand and can effectively use sales skills;, 4. Elaborate strong approach to generate market knowledge and insight;, 5. Strong ability to resist pressure and learning ability #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job DescriptionWoodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet. Overview: This person will be responsible for the day-to-day management of Health and Safety programs at two specific client projects in New Jersey and Connecticut in the Operations & Management (O&M) Business unit, reporting to the O&M Senior H&S Manager. The Project H&S Specialist will be based out of Bridgewater, New Jersey with periodic travel to a location in Connecticut. This role acts as a liaison for simultaneous engineering and operations projects. Responsibilities: • Provide assistance to project staff and client regarding regulatory and company compliance requirements and other matters pertaining to health and safety at various Superfund Sites or other regulated remediation project sites., • Maintain and update site-specific health and safety compliance programs, including but not limited to: Energy Control Procedures, fall protection/working at heights, Permit-Required Confined Space and entry permits, HAZWOPER Health & Safety Program, atmospheric monitoring and associated instrumentation, NFPA 70E, Respiratory Protection Program, Job Safety Analyses, Safe Work Plans (permitting), Hazard Communication, Point of Work Risk Assessments, etc., • Champion site safety observations and close call reporting and lead safety initiatives based on safety events and observations submitted., • Conduct site specific safety inspections and identify corrective actions., • Work with site team to address open action items., • Contribute to the incident evaluation process, provide guidance to managers and site personnel, and ensure completion of resulting preventative measures., • Periodic site visits to other client location in Connecticut to ensure adequate H&S support., • Interact with client as the H&S representative of the supported projects., • Track, manage, and administrate KPI data for H&S reporting., • 5+ years direct experience in occupational health and safety., • Degree in safety or related field. Professional certification (ASP, CSP, CIH,) preferred., • Functional knowledge of occupational and industrial safety standards to include OSHA, ANSI, NFPA, HAZWOPER and OSHA construction safety Competency in Confined Space Entry, Fall Protection, Control of Hazardous Energy and hazardous material management., • Experience in industrial systems, site remediation, electrical safety (NFPA 70E) and functional understanding of P&IDs preferred., • Ability to communicate effectively in both oral and written forms., • Strong technology skills to include Microsoft Office Suite, SharePoint, and other computer platforms/programs., • Strong presentation skills required., • Ability to organize data and processes., • Ability to meet deadlines, work independently, and effectively make decisions.

Job Description Job Title: Junior and Senior Electrical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (This is not a remote or hybrid job) Company Overview: BRUNS-PAK, an Information Technology/Data Center Facilities (A/MEP) firm, helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure that support operations in an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices. Artificial Intelligence and High-Performance Compute included. Job Description: BRUNS-PAK is seeking an experienced and highly skilled Senior Electrical Engineer specializing in the design of electrical systems for Data Centers and Mission Critical Facilities. The ideal candidate should possess a solid background in designing appropriately sized Electrical Service, Generators, Switchgear, UPS Systems, transformers, PDU’s, and other Mission Critical equipment, incorporating reliability and redundancy into their designs. Key Responsibilities: • · Design and develop electrical systems for Data Center Facilities, ensuring reliability, redundancy, and efficiency., • · Utilize AutoCAD and potentially Revit for effective design and documentation., • · Apply diversified knowledge of engineering principles and practices to a variety of assignments in related fields., • · Make informed and independent decisions regarding engineering methods and techniques., • · Consult with supervisor on critical issues, new concepts, and policy matters, seeking guidance as needed., • · Develop test procedures and provide support during the commissioning of electrical equipment., • · Develop comprehensive specifications. Qualifications: • · Minimum of 10-15 years of relevant experience in electrical engineering, preferably in the field of Data Center Facilities., • · Junior Electrical Engineer – 10-15 years experience., • · Senior Electrical Engineer – 15+ years experience., • · Proficiency in AutoCAD 2D design is essential, and experience with Revit design is a plus., • · Registration as a licensed Professional Engineer (PE) is usually required for this position (Senior). Requirements: • · Extensive experience in designing electrical systems for Data Center Facilities., • · Strong knowledge of Generators, Switchgear, UPS Systems, Transformers, PDU’s, and other Mission Critical equipment., • · Ability to integrate reliability and redundancy into electrical system designs., • · Excellent problem-solving skills and ability to apply engineering principles to diverse assignments. Normal business hours are Monday thru Friday 8-5pm. This role requires project travel. Benefits: • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · Salary is based on skill and experience., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description Job Title: Senior Mechanical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job). Company Information: Growing NJ Data Center Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Compute included. These are the business trends we help clients address. Description of Role: We are seeking a skilled Sr. Mechanical Engineer PE with 7+ year design experience for data center/mission critical project experience working with a team on ongoing and new projects. Individuals must have clear written and oral communication skills, detail oriented and up-to-speed software systems utilized in this field. Working alone or with additional team members with the ability to multi task and work successfully under pressure to achieve client deliverables. Knowledge of Cooling Towers, Glycol Systems, Air Cooling Systems, In Row Cooling, Rear Door Heat Exchange, BMS Control, Plumbing, Fire Protection, AutoCAD. Tasks include but not limited to: • · Professional Engineering design of the mechanical engineering discipline, including HVAC, Plumbing and Fire Suppression., • · Development of design solutions for discipline, using sound engineering principles and practices., • · Providing calculations and related documentation for designs developed and implemented and maintenance of documentation for future reference., • · Evaluation of existing facilities and systems respective to the as-built conditions which affect the design., • · Providing written reports documenting design criteria and other aspects of the design., • · Suggesting alternate solutions based upon life cycle and/or first cost basis with associated budget impacts., • · Coordination of consultant and in-house design and CADD personnel to accurately document the design intent on the construction and bid documents., • · Sealing of permit documents as Engineer of Record. (The company will furnish E & O and liability insurance). Company Insurance coverage will not cover any design for an outside project not related to the Company., • · Other responsibilities normally performed in the execution of mechanical design on a professional level, according to standard industry practices. Bachelor’s degree in Mechanical Engineering and Licensed/Registered. Have the ability to interact with the comprehensive multi discipline team on consulting reports, design projects, and construction/commissioning projects. Work Schedule: • This is a full-time job position. In office, not remote or virtual., • Normal business hours are Monday thru Friday 8-5pm., • · Salary is based on skill and experience., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description CWI Works is recruiting for a part-time Training Support Specialist position within the Senior Environmental Employment (SEE) Program which provides support to the U.S. Environmental Protection Agency (EPA) in Edison, NJ. Successful candidates must meet the age criteria of being 55 years of age or older and eligible to work in the United States. Selected candidates will also be required to undergo a federal security background check. ROLE AND RESPONSIBILITIES: Position(s) will support the lead-based paint abatement and renovation, repair, and painting (RRP) training provider accreditation programs. EPA's training provider programs play a direct link in reducing lead exposure. Training providers are responsible for training students seeking EPA certifications as dust sampling technicians, supervisors, project designers, inspectors, workers, and risk assessors. Region 2 oversees 50-60 training providers, over 164 individual courses, 7 disciplines, and up to 3 or more languages for both lead abatement and RRP combined. Duties include: • Reviews Lead-Based Paint (LBP) training provider accreditation and re-accreditation applications for abatement and RRP., • Responsible for providing necessarily follow up for approx. 60 training providers and over 164 courses., • Conducts in-person site visits for pre-accreditation and course audits for accredited trainers., • Maintains a training provider application status spreadsheet to ensure timely approvals in accordance with EPA's 180-day statutory requirements., • Assists with LBP outreach., • Provides technical assistance with phone and written inquiries as needed. Full-time or part-time position @ $19.21 per hour, benefits, vacation, sick and holidays.

Job Description Attalon, Emerging Products & Technologies (EP&T) Business Unit is seeking a Director of Advanced Lasers for EP&T’s sites in Warren and Somerset NJ. This manager will be responsible for leading a highly skilled, multi-discipline team developing advanced lasers for military applications. This manager will be responsible for providing technical and programmatic leadership, for serving as the customer interface and for collaborating with senior management on business strategy and program capture. Primary Duties & Responsibilities The EP&T Director of Advanced Lasers will have the following primary duties and responsibilities: • Senior manager of team of highly skilled optical, electrical, mechanical and software engineers, program managers and operations staff who develop advanced laser systems for military applications., • Provide the team with technical, programmatic and business leadership, • Collaborate with senior leadership on business strategy and capture efforts, • Serve as the primary customer interface during program capture and provide support as the team’s senior manager during program execution, • Collaborate with functional managers across EP&T sites and senior management on staffing and hiring, • Support the development of EP&T-wide and site-specific annual operating plan. Manage the site’s expenses to within plan, • Oversight of facility management, • Support for environmental health and safety, shipping, receiving, quality, and inventory control led by EP&Ts Business Operations and Quality leads. Education & Experience Masters or Ph.D. in optics, physics, applied physics or electrical engineering 15+ years of relevant experience in combination of education and work 7+ years of diversified leadership, planning, communicating, organizing and motivating people Must have experience leading highly technical, multi-discipline team in development of advanced laser systems or other closely related technical developments. Experience must include ownership of key technical responsibilities, overall program management and managing customer interface. Must have experience selling new programs and working collaboratively with senior management. Experience working within business with CAS-compliant accounting is preferred. Skills & Other Requirements Required skills: technical including system engineering, people management, customer management, business skills, • Deep technical knowledge of laser systems or closely related technology, • Ability to digest complex technical problems and lead team to correct solutions., • Strong analytic decision-maker with problem-solving skills, able to handle unforeseen issues, • Ability to collaboratively manage highly skilled and opinionated staff, • Ability to establish objectives and work plans, delegates assignments to subordinate, • Ability to develop new technical concepts and sell new programs to customers, • Ability to digest market and product intel to collaboratively develop business strategy with senior management, • Deep familiarity with diode-pumped solid-state lasers and/or pulsed fiber lasers, • Prior P&L responsibility, • Familiarity with CAS accounting standards and CAS-compliant, DoD-serving, cost-reimbursable businesses, • Other preferred experiences include facilities management, inventory management, EH&S compliance, AS9100 quality standards, and the IFS ERP system Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Security Clearance Eligibility Must be eligible for a U.S. government security clearance. Position requires eligibility for a U.S. government security clearance, which typically requires U.S. citizenship.

Job Description Berendsen Fluid Power Inc – Technical Field Representative Join forces with a forward-thinking and solution-oriented distributor specializing in hydraulic, pneumatic, motion control systems and components. As one of North America’s leading value-added distributors, Berendsen is a pioneering force, devoted to offering tailored solutions in the realm of hydraulic, pneumatic, electrical and electronic products and services. An exciting opportunity awaits you within our New Jersey/Eastern Pennsylvania region. This is not a remote opportunity; to be successful, the candidate must reside in the sales territory. Scope of Position Reporting to the Field Sales Manager and working closely with our internal support team and vendors, your primary focus will be providing technical expertise, enhancing product knowledge, and delivering unparalleled support to our valued clients. While maintaining a strong sales presence, your core responsibilities will center around technical excellence and client relationship-building. You will drive and orchestrate sales expansion and technical empowerment of our cutting-edge products within designated accounts, while striving to attain the milestones set by sales leadership. Beyond meticulous planning, harmonizing, and cultivating sales and support initiatives, we're looking for trailblazers to forge new avenues and propel us towards unprecedented sales achievements. Your Activities Will Include • Craft and execute strategic business plans, delving deep into market analysis and future customer requirements., • Review and advise system design improvements for efficiency and/or economical gains., • As a solutions provider, understand the clients end-goal and design criteria to provide the best possible fluid power solution from mechanical considerations, environmental conditions, fluid power conveyance and operation – through to the control systems and operational ergonomics., • Identify and target potential clients who align with our technical offerings., • Set and accomplish growth targets for our core product lines., • Maintain healthy gross margins and seek ways to enhance profitability, under the guidance of Sales Management., • Promote value-added services and other margin-boosting solutions., • Foster deep connections with customers, understanding their unique operations and needs., • Champion a needs-driven sales approach, leveraging strategic selling principles and team collaboration., • Work effectively with vendor sales representatives., • Maintain open lines of communication with Field Sales Managers and other team members, sharing performance insights, resolving issues, and staying informed about competitive developments and market conditions., • Contribute to inventory management as directed by Sales Management., • Plan your time and administrative tasks effectively, manage sales-related expenses, travel when necessary, master BFP internal systems, and emphasize the value of distribution to both customers and suppliers. Submit timely and accurate reports and itineraries as required by Sales Management., • Operate and maintain a home office from which you will frequently travel throughout your assigned territory. Qualifications Our ideal candidate possesses a strong work ethic, exceptional interpersonal skills, a competitive spirit, and a willingness to learn. Moreover, they should have a deep understanding of fluid power products and their applications in OEM markets. A foundational knowledge of electric controls, which complements our hydraulic sales efforts, is also essential. You will collaborate with engineers to specify parts for new applications. Key Qualifications: • Valid driver's license and a clean driving record, • Outstanding communication skills, • Proficiency in MS Office products, • Fluid Power Certification or equivalent of three years of experience in specifying products for target accounts, • Mechanical engineering degree (a definite plus), • Fluent in reading and interpreting hydraulic and electrical schematics. Capable of creating schematics is a valuable asset when conveying ides to clients, • Understanding of basic electrical/electronic circuits What We Offer You • Competitive base salary, incentive programs, car allowance, and a company-provided cell phone, • Comprehensive benefits package, including both a PPO and a High-Deductible plan (with company matching HSA), • Unlimited flexible vacation plan, holidays and floating holidays, • Disability and Life Insurance, • Company matching 401(k) (50% up to 8%!), • Tailored training and development programs, • Opportunities for career advancement and growth within the organization Join us in a technical role that values your expertise and commitment to providing top-notch solutions in fluid power and controls. Your career journey awaits at Berendsen Fluid Power, Inc. where technology meets opportunity, and your technical prowess will be a cornerstone of our success.

Job Description At First Student, our Location Safety Managers are a constant reflection of our companys commitment to safety and customer service. The Location Safety Manager is responsible for providing operational oversight, providing work guidance, and delivering leadership to full safety supervisory duties. At First Student, we are proud to offer: $50,000/year Tremendous Career Advancement Opportunities due to a strong presence across North America Positive and rewarding work environment Location Safety Manager Responsibilities: Administers driver hiring and compliance process Provides direction and guidance to location trainers Investigates accidents, incidents, and work-related injuries and determines fault/probability Prepares and submits accident-related compliance forms, maintains files, and enters in system Provides assistance and training to drivers and attendants on passenger management and other safety related issues Performs driver road checks of driver performance Supervise employees with safety and/or driver hiring or training responsibilities Provides various reports and analyzes safety trends Location Safety Manager Experience and Skills Required: 2-3 years transportation or safety-related experience High school diploma or equivalent Knowledge of federal and state rules and regulations regarding safety and environmental issues Computer literacy with Microsoft Word, Excel and PowerPoint Consistent attendance and punctuality Possess working vehicle for travel in service area First Students commitment to putting our customers first, dedication to safety, and an ambition to deliver dependable transportation makes for a working environment youll love. As a huge company with 120,000 staff and over 2.5 billion customers worldwide, youll also enjoy security, a brilliant future, and excellent training. Apply today to join our team! We aspire to have a culture where all people are First. We strive to attract and retain a diverse workforce therefore all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. For candidates applying to positions in San Francisco or Los Angeles California, First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance or Los Angeles Fair Chance Ordinance. First is an equal opportunity employer and by doing so we will sustain and promote an inclusive culture that supports future growth for all." First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, "JOY and FUN," we focus on social responsibilities by building state-of-the-art products for scientific advancement, especially for protecting health, safety, and the environment. "HORIBARIANs," the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. To learn more about our unique culture, visit our culture page. Culture - HORIBA Essential Job Functions: SUMMARY: Working on in-house repairs and support the testing and QC of service accessory orders, the Electronics Technician aligns, calibrates, tests, troubleshoots, modifies and repairs customer instrumentation. By following the procedures that define the way our products must operate, the Electronics Technician minimizes the performance aspects of our products so that they perform the way the customer needs them to perform to achieve research and production objectives, which are the reason the purchaser has purchased the product in the first place. Skills/Experience Required: • Hands-on, advanced troubleshooting skills, • Mechanically inclined, quick learner, • Previous customer service repair support experience, • Associate's degree {A.S.) or equivalent in science or technology from a two-year college or technical school, • 2-4 years of related experience and/or training or equivalent combination of education and experience, • Knowledge of computers, electronics and optics, • Ability to read and interpret documents professionally, • Ability to collect and analyze data, • Basic electronics circuit theory comprehension, • Ability to interpret basic electronic schematics, • Ability to solder and desolder components using proper tools, • Ability to work with small components without damage to adjacent components and without cold solder joints, • Ability to use hand tools and equipment such as multimeters and snap clamps, • Knowledge of hazards, health and safety, • May handle customer phone calls and support, • Write procedures as needed, • Work on ways to improve instrument quality or reliability where possible through engineering change requests Compensation Package: HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please call (732)494-8660 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORI BA is committed to making our workplace accessible for individuals with disabilities. EEO/Affirmative Action/Veteran Status/Disabilities.

Job Description Job Title: Mission Critical Project Manager Job Type: Full-time Job Location: On-Site Edison, NJ (This is not a remote or hybrid job) Company Overview: NJ Information Technology/Data Center Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence and High-Performance Compute included. These are the business trends we help clients address. Job Description: BRUNS-PAK is seeking an experienced and highly skilled Mission Critical Project Manager specializing in the design of Data Centers and Mission Critical Facilities. The project manager must possess skills in consulting reports, full architectural/engineering construction drawings/specifications, and construction. Excellent client interface and communication skills required. Tasks (Included but not limited to): • · Developing and issuing “notes of meeting”., • · Developing and issuing project schedules., • · On-site attendance with agendas of the client meetings., • · Attendance and support of project conference call/webex meetings., • · Review and follow-up of project action items., • · Excellent laptop communication skills including Excel, Microsoft Word, Visio, and Autocad (A Plus), and CSI format specifications. Work Schedule: • Normal business hours are Monday thru Friday 8-5pm. Flextime Available., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · Salary is based on skill and experience., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description Company: Davey Tree Surgery Co. Locations: Edison, NJ Additional Locations: n/a Work Site: On Site Req ID: 220917 Position Overview The Davey Tree Expert Company, is pleased to offer a key opportunity in the field of Utility Line Clearance as a Groundperson. Job Duties Provides support for the other crew members by controlling lowering ropes, limbs and persons from aloft Supplying tools for tree workers Controlling road and sidewalk traffic as needed by use of warning devices and other methods Cutting, chipping and loading brush and wood and proper job site cleanup Qualifications High school diploma or equivalent preferred Driver’s license required. Commercial driver’s license preferred and may be required, depending on job requirements Certificates and Licenses if necessary Pesticide license, if required by state law Herbicide license a plus Line clearance certification if working near utility transmission lines ISA Certified Tree Worker certification or willingness to obtain Additional Information What We Offer: * Paid time off and paid holidays Opportunities for advancement All job specific equipment and safety gear provided 401(k) retirement savings plan with a company match Employee-owned company & discounted stock purchase options Group Health Plan Employee referral bonus program Locations throughout US in major cities and desirable areas Career Development Program supported by Industry Expert Safety Specialists & Skills Trainers Scholarship Program for Children of Employees Charitable matching gift program *all listed benefits available to eligible employees Pre-employment Drug Screen and Social Security verification required. The Davey Tree Expert Company and CLS are an Equal Opportunity Employer. Davey is Employee Owned. Military Veterans are encouraged to apply. Visit Davey Website: WWW.DAVEY.COM Job Opportunities & Company Profile Information Company Overview Invest in your future. Join one of the largest employee-owned companies in the nation! Davey has a unique culture that focuses on the open exchanging of ideas, community partnership, a commitment to safety, and delivering unrivaled client service while acting as industry leaders in horticultural and environmental services. The Davey Tree Expert Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to protected class, including race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national or ethnic origin, marital or familial status, disability, status as a protected veteran, status as an Aboriginal or Indigenous person, or other classification protected by law. The Davey Tree Expert Company provides research-driven tree services, grounds maintenance and environmental consulting for residential, utility, commercial and environmental partners in the U.S. and Canada. We care about our clients, each other and the world around us. We offer the resources, size and stability of a big company while maintaining the culture, entrepreneurial spirit and feel of a small one. We invest in our employees by offering industry-leading training, technology and benefits that lead to a rewarding and safe work experience at all levels. Wherever you want to grow your career, there’s a place for you at Davey. To learn more, visit Davey.com. Accommodations: If requested by employee or otherwise as required by law, reasonable accommodations will be made to enable employees with disabilities to perform essential job functions. If you need assistance at any time, please contact us at 1-877-411-7601 or at . Employment Type: Permanent Job Type: Full Time Travel Expectations: Up to 25%

Job Description Company: Davey Tree Surgery Co. Locations: Edison, NJ Additional Locations: N/A Work Site: On Site Req ID: 220347 Position Overview Davey Utility Line Clearance, a division of The Davey Tree Expert Company, is pleased to offer a key opportunity in the field of Utility Line Clearance as a Foreman | Foreperson. Job Duties Provides crew supervision and line clearing and tree trimming services for major electric utility providers Services provided include pruning treetops, repairing damaged trees by trimming or removal as well as removing broken limbs from wires, roofs, and other objects Directs crew members and equipment as well as planning and executing the assigned work and tasks Responsible to supervise and assist in the proper maintenance, preparation and operation of all tools and equipment including hand tools, chainsaws, chippers, and aerial lifts Operates as part of a crew with supporting Groundmen and Trimmer/Climber Ability to perform all above mentioned functions Qualifications High school diploma or equivalent preferred REQUIRED: Commercial driver’s license with airbrake endorsement REQUIRED: Supervisory experience & signifiant Bucket Operator & Climbing experience Certificates and Licenses if necessary Pesticide license, if required by state law Herbicide license a plus Line clearance certification if working near utility transmission lines ISA Certified Tree Worker certification or willingness to obtain Additional Information What We Offer: * Paid time off and paid holidays Union pay and benefits Pay range: $38 - $39/hour (based on experience) Opportunities for advancement All job specific equipment and safety gear provided Employee-owned company & discounted stock purchase options Group Health Plan Employee referral bonus program Locations throughout US in major cities and desirable areas Career Development Program supported by Industry Expert Safety Specialists & Skills Trainers Scholarship Program for Children of Employees Charitable matching gift program *all listed benefits available to eligible employees We are proud to be an Equal Employment Opportunity and Affirmative Action employer. As a service provider, our success depends upon our ability to attract and retain qualified personnel, regardless of their age, race, color, religion, gender, national origin, disability, sexual orientation, gender identity, military or veteran status, or other protected characteristics as established by federal, state or local law. The Davey Tree Expert Company has U.S. and Canadian operations in more than 47 states and five provinces and provides a variety of tree care, grounds maintenance and consulting services for the residential, utility, commercial, and government markets. Founded in 1880, Davey has been employee-owned for 40 years and has more than 10,000 employees who provide Proven Solutions for a Growing World. For more information, visit If you need any assistance at any time please contact us at 1-877-411-7601 or at ." Company Overview Invest in your future. Join one of the largest employee-owned companies in the nation! Davey has a unique culture that focuses on the open exchanging of ideas, community partnership, a commitment to safety, and delivering unrivaled client service while acting as industry leaders in horticultural and environmental services. The Davey Tree Expert Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to protected class, including race, color, religion, sex, pregnancy, sexual orientation, gender identity or expression, national or ethnic origin, marital or familial status, disability, status as a protected veteran, status as an Aboriginal or Indigenous person, or other classification protected by law. The Davey Tree Surgery Company is based in Livermore, California, and provides a full range of utility tree care and pole test and treat services. The Davey Tree Expert Company provides research-driven tree services, grounds maintenance and environmental consulting for residential, utility, commercial and environmental partners in the U.S. and Canada. We care about our clients, each other and the world around us. We offer the resources, size and stability of a big company while maintaining the culture, entrepreneurial spirit and feel of a small one. We invest in our employees by offering industry-leading training, technology and benefits that lead to a rewarding and safe work experience at all levels. Wherever you want to grow your career, there’s a place for you at Davey. To learn more, visit Davey.com. Accommodations: If requested by employee or otherwise as required by law, reasonable accommodations will be made to enable employees with disabilities to perform essential job functions. If you need assistance at any time, please contact us at 1-877-411-7601 or at . Employment Type: Permanent Job Type: Full Time Travel Expectations: Up to 25%

Job Description WE ARE CURRENTLY PAYING UP TO $75.00 PER HOUR DEPENDING ON EXPERIENCE PLUS SIGN ON BONUS THE FOLLOWING ITEMS ARE SOME OF THE REQUIRMENTS OF PERFORMING THIS POSITION. • Oversee operations in an auto service unit to ensure compliance with quality standards, • Contact clients and convince them to bring vehicles to their unit for repairs, • Oversee the inspection of automobiles to identify faulty components and facilitate process for repairs, • Supervise the activities of automotive service technicians to ensure efficient job performance and timely repairs, • Conduct price negotiations with clients to reach a favorable bargain for both management and client, • Oversee the hiring and training of an effective auto service team, • Maintain accurate record of all accounts and relevant financial information, • Monitor inventory to regulate and ensure availability of required vehicle parts, • Ensure automotive service staff comply with environmental laws and regulations, • Oversee the procurement of vehicle parts, automotive equipment and various other items required in an auto service department, • Evaluate the performance of automotive service staff in order to acknowledge efficient employees and guide underperforming ones, • Listen to client complaints and assist in addressing their issues and resolving challenges, • Oversee the disposal of wastes such as used engine oil, soot to ensure adherence to health and safety laws, • Assign and schedule work duties to auto service staff according to their skills, • Follow up customers to obtain feedback and ensure they are satisfied with received service, • Attend workshops and study relevant publications to stay up-to-date with developments in the automotive service industry., • Strong communication and customer service orientation: A good mechanic must be able to communicate and relate very well with customers. This quality is very important in conveying information on car condition to customers and convincing them that you are capable of handling the problem. Customers will always feel at ease when complex technical issues are explained to them in plain language that they can easily understand, • Good diagnostic and problem solving skills: A good auto mechanic should be able to quickly identify the source of minor problems manually. For complex problem, using diagnostic tools is important. Also, it is very important that the mechanic is able to fix or proffer solution to the problems in real time, • Dexterous and energetic: He/she should be skilled at using complex and hand tools. In addition, he/she must be energetic and have the stamina to sit, stand, bend, kneel, and squat while carrying out his/her job, • Educated and certified: These two requirements may not be mandatory, but they are necessary. For one to be employed as a mechanic, he/she must be trained. Going ahead to obtain a recognized certificate like the ASE certificate for auto technicians presents him/her as a true professional. Also, most employers prefer to hire auto mechanics with minimum qualification of high school diploma, • Innovative and ability to learn fast: A good automobile mechanic must always be on the lookout for better techniques and tools for carrying out his/her duties. He/she must be able to learn and adapt fast to changes in diagnostic and repair technology. WE OFFER THE FOLLOWING BENEFITS • PAID SICK DAYS, • PAID VACATION, • TOP TOP, • UNIFORMS Maplecrest Ford Lincoln does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability or any other characteristic protected by law. In order to provide equal employment and advancement opportunities to all individuals, employment decisions at Maplecrest Ford Lincoln will be based on merit, qualifications and abilities. Job Description The statements included in the job description are intended to outline the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed Powered by JazzHR TV8YOSIsXs