Trabajos hvac sheet metal en Hoboken, New JerseyCrear alertas

Job DescriptionBenefits: • 401(k), • Company car, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Parental leave, • Training & development, • Vision insurance We are looking to fill a full time permanent HVAC Installer Position: We are a Lite Commercial and Residential Contractor. Our installs are high end residential split systems, lite commercial split & package systems, sheetmetal ductwork and Heat pump Systems. We offer top wages and benefits with support for a path to achieve maximum potential. • Experience with residential and light commercial HVAC equipment, furnaces, boiler, water heaters, split systems duct free and roof top units, • Experience with sheet metal ductwork, duct work fittings and accessories, • Experience with piping, cutting, soldering, brazing threading and pipe associated craft, • Ability to install humidification systems and associated accessories, • Familiar with control wiring, thermostats and their installation, • Be able to install and start up installed equipment and adjust to the manufacturers and job specifications, • Be able to troubleshoot, adapt and resolve / repair all issues that arise during installation that would keep the equipment from functioning properly, • Perform required documentation for each installation with a complete startup record, • Must have a customer service attitude, • Must work well within a team environment, • Continuously improve knowledge of general HVAC practices, • Must have a clean valid Drivers LicenseWe offer the following: * Top pay for your dedication, time and knowledge, • Vacation, sick and personal days, • 7 Paid Holidays, • Company clothing and apparel, • Health Benefits, • Retirement Plan (401K Plan), • Profit Sharing Participation, • Bonus and incentive program, • Company outings and events, • On and off site training opportunitiesOur company provides a family environment where you are treated and respected and given the opportunity to grow, learn and enjoy your life! Required experience: • 5 years HVAC Installation experienceJob Type: Full-time Benefits: • 401(k), • Dental insurance, • Employee discount, • Health insurance, • Paid time off, • Referral program, • Vision insuranceSchedule:, • 10 hour shift, • 8 hour shiftSupplemental Pay:, • Signing bonusEducation:, • High school or equivalent (Preferred)Experience:, • HVAC: 2 years (Required)License/Certification:, • EPA Universal Certification (Preferred)Work Location: Multiple locations

Job Description A1 EMS INC. — Expert Mechanical Services is hiring experienced HVAC installers and installation mechanics for commercial and residential projects throughout Long Island and New York City. We are looking for dependable mechanics who take pride in their work, understand proper installation practices, and can complete assigned work without constant supervision. You should be comfortable working with a team, coordinating with the office, and representing the company professionally at customer locations. A minimum of five years of hands-on HVAC installation experience is required. This is not an entry-level or helper position. Responsibilities • Install and replace rooftop units, split systems, heat pumps, ductless systems, furnaces, and air handlers, including removal of existing equipment and coordination of new equipment placement., • Install and connect sheet-metal ductwork, transitions, dampers, supports, insulation, and related air-distribution components., • Install refrigerant piping, braze with nitrogen flow, pressure-test for leaks, evacuate systems using a micron gauge, and charge equipment according to manufacturer requirements., • Install condensate drains, traps, drain pans, pumps, and overflow protection. Install thermostats and low-voltage controls, and coordinate regulated electrical and gas work with appropriately licensed trades., • Read plans, wiring diagrams, and installation instructions. Complete startup checks, verify system operation, document readings, maintain clean jobsites, and direct helpers when assigned. Required Qualifications • At least five years of hands-on HVAC installation experience. Trade school is valuable but does not replace the required field experience., • Ability to independently complete installation tasks, use trade tools properly, identify installation problems, and follow manufacturer requirements., • EPA Section 608 Type II or Universal certification., • Valid driver’s license and the ability to meet agreed reporting arrangements and travel between assigned jobs. Work is performed throughout both Long Island and New York City., • Reliable attendance, professional communication, accurate job documentation, safe work practices, and authorization to work in the United States. Preferred Experience Commercial rooftop replacements, installation crew leadership, boiler and hydronic installations, advanced sheet-metal work, and equipment startup experience are valuable. EPA Universal certification, OSHA 30, NYC SST credentials, A2L refrigerant training, and manufacturer training are a plus. Required site-specific credentials must be obtained before applicable assignments. Compensation and Schedule Base pay: $35–$50 per hour. Starting pay will reflect your relevant experience, installation skills, certifications, and ability to independently complete or lead installations. Overtime is paid in accordance with applicable law. Normal working hours, reporting arrangements, travel requirements, and any scheduled overtime or weekend work will be reviewed during the hiring process. Work Environment This is an in-person field position involving rooftops, ladders, mechanical rooms, and handling tools and equipment. Applicants must be able to perform the essential duties safely, with or without reasonable accommodation, using appropriate lifting equipment or assistance. How to Apply Apply through this posting with your resume or a brief work history. A formal resume is helpful but not required. Please include answers to the following questions: • How many years of hands-on HVAC installation experience do you have?, • What types of equipment have you installed, and which installation tasks can you complete independently?, • Which EPA certification and other trade or safety credentials do you hold?, • Can you work at assigned jobs throughout both Long Island and New York City?, • What hourly rate are you seeking within the posted range, and when would you be available to start?

Job Description We are looking for a skilled and detail-oriented HVAC Sheet Metal Project Estimator to join our team. This role is responsible for preparing accurate cost estimates for HVAC sheet metal fabrication and installation projects. Responsibilities: • Prepare accurate and complete HVAC sheet metal estimates for fabrication and installation projects, • Perform quantity takeoffs for sheet metal, equipment, and accessories, • Review project specifications, drawings, and contract documents, • Determine project scope of work and required estimate components, • Develop detailed labor and material cost estimates, • Prepare and manage change orders based on revised mechanical/shop drawings, • Maintain organized files of all working documents, including pricing from suppliers and cost data, • Collaborate effectively with internal teams and vendors Qualifications: • Minimum 2-5+ years of sheet metal estimating experience preferred, • Strong knowledge of HVAC systems and sheet metal fabrication, • Proven ability to prepare accurate and complete estimates, • Excellent verbal and written communication skills, • Strong organizational and time management skills, • Ability to prioritize multiple projects and deadlines, • Detail-oriented with strong analytical and problem-solving skills, • Strong negotiation and leadership abilities, • Self-motivated with a strong work ethic.\nCompany Description Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components. Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.

Job Description A well established HVAC organization is looking for an experienced HVAC Installer to join our growing team serving primarily Jersey City and the surrounding Hudson County area. We have been serving customers since 1953, and while we are a smaller company today, with approximately 10 employees, we are growing. This is an opportunity to join a close-knit team where your experience matters, your work is visible, and you can take ownership of installations from start to finish. This is a hands-on role for an experienced installer who knows how to work through the challenges that come with HVAC installation in a city, including tight spaces, multi-story buildings, difficult equipment access, custom ductwork, and situations where a crane simply is not an option. If you take pride in doing the job correctly, can work with minimal supervision, and have broad residential and light commercial installation experience, we want to hear from you. What You'll Do As an HVAC Installer, you will install and replace residential and light commercial HVAC equipment while ensuring every job is completed safely, professionally, and in accordance with applicable codes. Responsibilities include: • Install and replace furnaces, air conditioning systems, condensers, air handlers, heat pumps, boilers, water heaters, mini-split systems, rooftop units, and related HVAC equipment., • Perform residential and light commercial installations throughout Hudson County, primarily in Jersey City., • Disassemble and reassemble packaged HVAC units on site when equipment cannot be moved into place by crane., • Fabricate, modify, and install ductwork transitions on site as required for individual installations., • Install sheet metal, flexible ductwork, vents, and other air distribution components., • Safely transport equipment and components through tight stairwells, attics, crawl spaces, closets, rooftops, and other challenging installation environments., • Read and interpret equipment specifications, installation instructions, mechanical plans, and technical documentation., • Complete installations in compliance with manufacturer requirements and applicable local, state, and federal codes., • Follow proper refrigerant handling and job-site safety procedures., • Coordinate with management and dispatch to keep installations on schedule., • Troubleshoot installation-related issues and determine appropriate solutions in the field., • Maintain clean, safe, and organized job sites., • Test completed installations and verify proper system operation., • Explain newly installed systems and basic operation to homeowners and customers., • Use company mobile applications, tablets, and field-service software to document work as required. Required Qualifications Candidates must meet the following requirements: • 5+ years of hands-on HVAC installation experience., • Demonstrated experience installing and working with:, • Mini-split systems, • Boilers, • Water heaters, • Rooftop units (RTUs), • Hot-air furnaces, • Central air conditioning systems, • Heat pumps, • Residential and light commercial HVAC systems, • Hands-on experience disassembling and reassembling packaged HVAC units., • Ability to fabricate and modify ductwork and duct transitions on site., • Strong knowledge of HVAC installation procedures, equipment, tools, and safety practices., • Ability to use hand tools, power tools, sheet-metal tools, and HVAC installation equipment safely and effectively., • Ability to independently work through field installation challenges and troubleshoot problems as they arise., • Valid driver's license, • Fluent English, • Ability to safely lift and carry at least 50 pounds, including equipment and components.

Job Description Essential HVAC Installer Duties & Responsibilities The primary function is the installation of new or replacement HVAC systems (furnaces, air conditioners, heat pumps, air handlers, etc.) in residential or commercial settings. System Installation: Installing heating, cooling, and ventilation equipment according to manufacturer specifications and company requirements. Ductwork: Fabricating and installing sheet metal and flex duct systems, vents, and air distribution components. Piping & Wiring: Installing copper refrigerant lines (including brazing and soldering), properly connecting gas lines, and wiring both low and high voltage to the equipment. Blueprint Reading: Interpreting blueprints, schematics, and technical diagrams to plan system layouts and complete installations correctly. Performance Testing: Performing system start-ups and testing performance, checking refrigerant levels, airflow, and calibrating thermostats. Compliance: Ensuring all installations comply with local, state, and federal codes, including proper safety procedures and refrigerant handling regulations. Customer Interaction: Explaining the system operation and maintenance to the customer and ensuring a high level of satisfaction. Logistics: Pre-measuring jobs to determine material needs, verifying, loading, and stocking company vehicles with equipment and parts. ✨ Key Skills and Qualifications Required Skills & Qualifications Technical: • Proficiency with hand and power tools, • Strong mechanical aptitude and problem-solving skills, • Ability to read and interpret technical documents Physical: • Physical ability to lift heavy equipment (up to 50-100 lbs), • Comfort working in confined spaces (attics, crawl spaces) and on roofs/ladders, • Ability to work in various weather conditions and extreme temperatures Professional: • Valid NJ driver's license, • Must have 4 years of experience, • Excellent customer service and communication skills, • High level of attention to detail and commitment to safety, • Ability to work independently and as part of a team We value our team and are committed to supporting your long-term financial well-being. Following one year of continuous employment with our company, you will become eligible for enhanced benefits.

Job Description Full-Time Positions Available: • Sheet Metal Duct Shop Fabricator, • Sheet Metal Duct Installer (Tin Knocker) and or HELPER, • HVAC Service Technician/Mechanic, • Delivery Driver, • Bookkeeper (Office Worker) ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sheet Metal Duct Shop Fabricator: We have a full operating sheet metal fabrication shop. We fabricate duct work for commercial and residential buildings. Responsibilities • Operate Plasma to cut 5'x10' sheets of metal., • Operate machines to cut, shape, and form sheet metal including roller, rotodie, shear, punch press, hand brake, weighting machine, plasma cutters, and more., • Drill and punch holes in metal, for electrical components, screws, bolts, or rivets., • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items., • Trim, file, grind, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools., • Finish parts, using hacksaws, and hand, rotary, or squaring shears., • Develop and lay out patterns that use materials most efficiently., • Insulate ductwork using glue & pinspotter., • Maintain equipment, making repairs and modifications when necessary. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Sheet Metal Duct Installer (Tin knockers) Position: Responsibilities: • · Installation of a variety of Commercial HVAC equipment, • · Installation of a variety of HVAC DUCTWORK (round, spiral, rectangular), • · Sheet metal Fabrication in the field as necessary., • · Responsible for sheet metal measurements, sketching and ordering ductwork. Requirements: • · Reading and interpreting blueprints, • · To have a basic understanding of central air conditioning systems, • · Should be reliable, self-motivated, have the ability and knowledge to read specifications and Shop Drawings., • · Should possess good communication skills, • · Must be able to maintain a safe work area, • · Should also have a flexible attitude and should be willing to travel at any given point of time --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- HVAC Service Mechanic Position: Responsibilities: · Install new heating, ventilation, and air conditioning systems · Inspect and perform equipment repairs and replacements · Perform routine preventative maintenance · Respond to emergency maintenance requests · Adhere to all safety policies and procedures · Responsible for the installation of large mini-split systems, including refrigeration piping, pipe insulation, and control wiring · Perform start-up of newly installed HVAC systems · Perform Service repairs and troubleshooting diagnostics to existing HVAC systems · Perform in the field using related experience and knowledge of codes and specifications. Qualifications: · Previous experience in HVAC or other related fields (minimum of 5 years prior experience) · Familiarity with HVAC wiring diagrams · Ability to handle physical workload · Run Refrigeration piping · Strong problem solving and critical thinking skills · Qualified individuals most possess a full-range of mechanical knowledge · Ability to Navigate NYC Subway Systems Delivery Driver: • Looking for a driver to deliver Duct work and material to job sites daily., • When not making deliveries, driver will help fabricate duct work Education · Technical trade school diploma and training certificate is a plus · Minimum of 5 years’ experience in a commercial HVAC application and Ductwork installation • Helpers Minimum of 2 years' experience in commercial and or Residential · OSHA 30 hours \nCompany Description We've been in business for 40 + years and continue to grow each and every day. We're looking for highly motivated individuals to join the success of keeping New York City happy. We've been in business for 40 + years and continue to grow each and every day. We're looking for highly motivated individuals to join the success of keeping New York City happy.

Job Description MR. AIR NYC Lead Ductless / Heat Pump Installer Job type: Full-time Work location: Based in Brooklyn, with field installations throughout New York City Base pay: $40-$52 per hour, based on relevant experience, demonstrated competency, and leadership ability About the Position MR. AIR NYC is seeking an experienced Lead HVAC Installer to independently lead complex ductless mini-split, heat-pump, and related HVAC installations throughout New York City. Our work includes residential and light-commercial projects in brownstones, townhouses, apartments, condominiums, co-ops, commercial spaces, and older NYC buildings. Projects may involve challenging equipment access, line-set routing, condensate management, masonry, finished interiors, roof access, electrical coordination, and occupied spaces. This is a senior field position for an installer who can lead a crew, solve difficult jobsite conditions, maintain high workmanship standards, communicate professionally, and help develop less-experienced installers. Responsibilities • Lead installation crews from jobsite arrival through system commissioning and customer handoff., • Review project scope, equipment, drawings, routing, access, materials, and job readiness before work begins., • Assign responsibilities based on crew members' skills and level of supervision required., • Identify conditions that differ from the approved scope and escalate significant design or project conflicts before making changes., • Install and supervise ductless mini-split, heat-pump, multi-zone, cassette, concealed-ducted, VRF, and related systems., • Install and verify refrigerant piping, flare preparation, torque practices, insulation, supports, and piping protection., • Perform or verify nitrogen pressure testing, evacuation, micron testing, startup, and commissioning., • Install and verify electrical and communication wiring within the scope of the HVAC installation., • Install and verify condensate piping, pumps, float switches, drains, and terminations., • Identify installation conditions that may create water-leak, drainage, access, or serviceability problems., • Maintain high workmanship standards for equipment placement, routing, supports, line-hide, penetrations, sealing, patching, cleanup, and property protection., • Verify proper system operation before completing each installation., • Complete required project documentation and photographs., • Communicate professionally with customers, office personnel, and other project stakeholders., • Maintain jobsite organization and follow company safety requirements., • Confirm that crews have the appropriate tools, ladders, materials, equipment, and access to perform work safely., • Stop and escalate work when a project is not ready or cannot be completed safely or according to approved requirements. Crew Leadership and Training • Lead Installers are expected to help develop less-experienced field employees. Responsibilities include:, • Demonstrating proper installation procedures., • Explaining why specific installation methods and standards are required., • Giving helpers and developing installers clear assignments., • Supervising appropriate hands-on work., • Inspecting work and providing constructive technical feedback., • Participating in competency evaluations and signoffs., • Helping develop future Assistant Leads and Lead Installers., • Participating in paid field-training sessions., • Communicating field problems constructively to sales, design, operations, and service personnel., • Raising safety, material, access, scope, and project-readiness concerns early. Qualifications • Approximately 5+ years of HVAC installation experience strongly preferred., • Significant ductless mini-split and heat-pump installation experience., • Demonstrated experience independently leading HVAC installations., • EPA Section 608 certification appropriate to the work; Universal certification strongly preferred., • Strong knowledge of refrigerant-piping and installation practices., • Experience with nitrogen pressure testing, evacuation, and micron-level verification., • Strong condensate and water-management practices., • Ability to read manufacturer installation instructions, equipment schedules, project plans, and technical documentation., • Working knowledge of HVAC electrical and control wiring., • Ability to identify field conditions that require escalation., • Experience directing helpers or developing installers., • Professional customer communication skills., • Ability to work safely in active residential and commercial environments throughout New York City., • Ability to communicate technical instructions, safety concerns, workmanship corrections, and jobsite information effectively with coworkers, customers, and office personnel. + Preferred Experience • Experience with any of the following is especially valuable, • Mitsubishi Electric, CITY MULTI/VRF, Fujitsu, or Daikin systems., • Multi-zone systems, branch boxes, ceiling cassettes, or concealed ducted systems., • Sheet-metal or duct-fabrication work., • Brownstone, townhouse, historic-building, or retrofit HVAC projects., • Difficult interior or exterior line-set routing., • Core drilling, masonry, carpentry, or finish work., • Condensate-pump and complex drainage systems., • Roof installations., • Training apprentices, helpers, or developing installers., • Additional language skills that support effective communication within a multilingual workforce. Compensation and Benefits • Base pay is $40-$52 per hour, based on relevant experience, demonstrated technical competency, and leadership ability., • Company Truck, • Fuel Card, • Referral Program, • Professional Development Assistance, • IRA Similar to 401(k), • Health Insurance, • Retirement Plan, • Tools Provided, • Paid Time Off (PTO), • Employee Discount, • Employee Assistance Program, • Paid Holidays, • Flexible Schedule (no Sundays, Sometimes Saturdays), • No On Call, • Paid technical training and field-lab sessions are part of this position. Career Development Qualified Lead Installers may advance into positions such as Senior Lead Installer, Field Trainer, Installation Supervisor, or Field Operations leadership based on technical skill, workmanship, reliability, communication, leadership, and ability to develop others. Hiring Process Qualified candidates may participate in: 1. An initial experience and availability screen., 2. A structured technical interview., 3. A practical installation assessment., 4. A crew-leadership and communication assessment., 5. Verification of relevant credentials and driving qualifications, where applicable. 6. Reference checks., 6. A paid field assessment, where appropriate. Any field assessment involving productive work will be paid. Candidates will not be charged fees to apply for or obtain this position. MR. AIR NYC provides equal employment opportunities to qualified applicants and employees without unlawful discrimination based on protected characteristics.

Job Description Job description: About Done Right Hood & Fire Safety Done Right Hood & Fire Safety is a rapidly growing fire life-safety and mechanical services company specializing in commercial kitchen exhaust systems, fire suppression, fabrication, installation, and compliance services throughout New York City, Long Island, and Westchester County. We partner with some of the region’s most recognized restaurants, hospitality groups, and commercial facilities, delivering reliable solutions built on technical expertise, accountability, and long-term relationships. As our company continues to expand, we are seeking a Field Project Manager who thrives outside the office, someone who leads projects directly in the field and ensures successful execution from start to finish. This is not a drafting-only role. We are looking for a hands-on leader who spends approximately 80% of their time on job sites and 20% coordinating internally. Why Join Done Right Hood & Fire Safety? • Stable and rapidly growing company, • Long-term career opportunity with advancement potential, • Direct collaboration with executive leadership, • Diverse projects across NYC’s restaurant and commercial sectors, • Strong team culture focused on accountability and growth, • Exposure to engineering, construction, fabrication, and fire life-safety industries, • Competitive compensation based on experience Benefits & Schedule • Health Insurance, • Dental Insurance, • Vision Insurance, • Commuter Benefits Program, • Paid Holidays, • Paid Sick Time & PTO, • Stable Monday–Friday Schedule, • Full-Time, Long-Term Career Position Position Overview The Field Project Manager is responsible for overseeing mechanical kitchen exhaust and fire suppression projects from kickoff through completion. This role requires an individual comfortable managing active construction environments, coordinating multiple trades, and representing Done Right Hood & Fire Safety directly with clients, contractors, and inspectors. The ideal candidate understands plans and installations but is primarily focused on execution, coordination, and leadership in the field, not sitting behind a desk producing drawings. Key Responsibilities • Review and interpret architectural, mechanical, and construction drawings and specifications., • Prepare accurate project estimates and quotations., • Solicit and coordinate pricing from vendors, suppliers, and subcontractors., • Analyze project requirements and develop competitive bid proposals., • Negotiate pricing, terms, and contracts with general contractors and project stakeholders., • Follow up on bids and proposals to maximize project awards and close sales opportunities., • Schedule and coordinate equipment purchases, fabrication, and material procurement., • Manage equipment deliveries and ensure materials arrive on schedule., • Develop and maintain project schedules, including installation timelines and job durations., • Coordinate labor, subcontractors, and field crews to meet project milestones., • Monitor project costs, change orders, and profitability., • Communicate regularly with contractors, vendors, and customers regarding project status., • Ensure projects are completed safely, on time, and within budget.Qualifications, • Experience in kitchen exhaust systems, HVAC, sheet metal, mechanical contracting, or commercial construction preferred., • Strong ability to read and interpret blueprints, plans, and specifications., • Experience with estimating, project management, procurement, and scheduling., • Proven ability to negotiate contracts and close awarded projects., • Strong organizational, communication, and time-management skills., • Ability to manage multiple projects simultaneously., • Proficiency with Microsoft Office and estimating/project management software., • Self-motivated, detail-oriented, and results-driven.If you think you have what it takes please send a copy of your resume and we will reach out to you for an interview if you qualify! Powered by JazzHR J2da6lvegB

Job Description Travel Required: 30-mile radius from Westbury to Manhattan We are seeking an HVAC Sheetmetal Drafter to become part of our team! Our projects intersect many sectors from Leading Technology Firms/Hotels/Educational Campuses/Bio Labs/Multi-Family Housing/Commercial Industries/Finance Industry/Tenant Fit out and more...Employees gain a wealth of experience through drafting different projects and regularly interact with Design Professionals to gain project approval. Qualifications: • Proficiency in CAD, Navisworks, and other drafting tools, • Strong understanding of mechanical engineering principles and design standards, • Detail-oriented individual with strong analytical and problem-solving abilities, • Self-motivated and driven self-starter with high integrity, • Excellent communication, interpersonal, and commitment to getting the job completed with accuracy, • 6–10 years of relevant experience required Responsibilities: • Work with senior draftsmen, estimating team and project management team to understand the scope of work and installation intent to accurately design and produce shop drawings and as-built drawings, • Field Surveying Job Site to confirm dimensions, • Ensure compliance with benchmarks, ceiling heights and tolerances, • Flag conflicts on shop drawings that require architect/engineer review, • Ability to layout equipment and orientation of mechanical equipment as required, • Conduct thorough reviews of mechanical plans and drawings for accuracy, compliance, and feasibility, • Produce accurate shop drawings based on industry standard and norms, • Review and modify designs if mechanical plans presented are not achievable \nCompany Description Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components. Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.

SHIFT: Friday - Tuesday 11:00PM - 7:30AM (Starts Friday @ 11:00PM) Primarily responsible for hands-on maintenance of HVAC systems and related auxiliary equipment. Required Education: High School diploma. Preferred Education: Some college education in engineering and/or a completion certificate from a recognized trade school; familiarity with PC. Required Experience: 3 years mechanical maintenance experience with absorption/freon A/C equipment and stream/related heating systems. Required Skills, Knowledge and Abilities: Strong knowledge/skills in mechanical systems; intermediate knowledge/skills in electrical and plumbing systems; working knowledge/skills of refrigeration cycle, common parts, pneumatic/electric/electronic control systems; basic knowledge/skills in brazing, soldering, insulation, measuring, carpentry and sheet metal; basic knowledge of safety standards/regulation, current CFC regulation, physics and math; ability to read blueprints, schematics, wiring diagrams and nameplates; good communication skills; ability to follow written and verbal instructions; New York City Refrigeration Engineer's license and EPA-CFC Universal certification. In compliance with NYC's Pay Transparency Act, the hourly rate for this position is USD $52.688. This rate is based on bargaining unit contracts. This pay range represents base pay only and excludes any additional items such as incentives, bonuses, clinical compensation, or other items. NYU aims to be among the greenest urban campuses in the country and carbon neutral by 2040. NYU is an Equal Opportunity Employer and is committed to a policy of equal treatment and opportunity in every aspect of its recruitment and hiring process without regard to age, alienage, caregiver status, childbirth, citizenship status, color, creed, disability, domestic violence victim status, ethnicity, familial status, gender and/or gender identity or expression, marital status, military status, national origin, parental status, partnership status, predisposing genetic characteristics, pregnancy, race, religion, reproductive health decision making, sex, sexual orientation, unemployment status, veteran status, or any other legally protected basis. All interested persons are encouraged to apply at all levels.

Working knowledge of plumbing, piping, HVAC, and sheet metal trades and field installation methods. MissionHires is seeking a detail-oriented Plumbing or Sheet Metal Detailer on behalf of a construction company. Create shop drawings for plumbing, piping, HVAC, and/or sheet metal systems on construct

People want to work at Capstone because of our high-performance culture.We build strong relationships, challenge the status quo, work hard to deliver results, and pay it forward in our communities.Through transparency and open lines of communication, we do the right thing and deliver on our promises

Performs repairs of Heat Ventilation Air Conditioning (HVAC) systems, which may include heating boilers, air conditioning units, VAV boxes, exhaust fans, building automation controls and filter replacement. Manages work requests, creates spreadsheets for and maintains an inventory of tools and suppl

We are a global player in the automotive supply industry with over 15,000 employees in 20 countries.We specialize in the development, manufacture, and sales of high-quality technical products across the areas of chassis, body, powertrain, industry, and micromobility, including innovative e-cargo bik

People want to work at Capstone because of our high-performance culture.We build strong relationships, challenge the status quo, work hard to deliver results, and pay it forward in our communities.Through transparency and open lines of communication, we do the right thing and deliver on our promises

Provide guidance and mentorship to junior HVAC team members, sharing industry knowledge and best practices. Key Requirements: - Minimum of 5-10 years of experience in residential HVAC system installations. Strong desire to continuously learn and grow within the HVAC trade.

Perform mechanical and electrical repairs of all manufacturing equipment -Work with all supervisors and personnel to resolve and coordinate repairs in a timely manner -Perform mechanical and fabrication installation as needed -Troubleshoot facility maintenance issues as needed -Experience in a maint

Accountable for proper maintenance and repair of all plant/buildings and grounds equipment to include, troubleshooting, preventive maintenance and predictive maintenance.Upload, download, configure, modify and troubleshoot PLC programs and process instruments.May be responsible for building and wiri

High school diploma or equivalent; technical trade school training or HVAC certification is preferred. We are a commercial HVAC service and maintenance company focused on reliable, efficient facility operations for large buildings. The company supports a variety of commercial properties by deliverin

Demonstrate broad command of commercial HVAC equipment and related controls, backed by trade school training or a recognized HVAC credential. Take ownership of advanced commercial HVAC service assignments across New York City, from diagnosis through repair and return to operation. Bring at least 10

Our client is seeking an experienced Industrial Maintenance Mechanic for the 1st shift to join their unionized manufacturing team, performing repairs and maintenance on a variety of production and utility equipment.In this hands-on role you will be working with robotics, automated systems, hydraulic

Daily inspection, monitoring and maintenance of all building systems including but not limited to HVAC, plumbing, electrical, security, cable/telecommunications, fire and safety, etc.

Maintenance Technician (1st Shift).We are seeking a skilled and detail-oriented Maintenance Technician / Controls Specialist to support the ongoing reliability, performance, and efficiency of our manufacturing operations.This role is responsible for maintaining plant equipment, troubleshooting elect

Our client is looking for a Mechanical Assembler to join the team.Assemble and install major components with their sub-assemblies under minimal supervision -Perform assembly functions such as layouts, maintaining specified tolerances, positioning of components, alignment of drive couplings and pinio

May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts.

We are looking for a friendly, motivated.The ideal candidate enjoys working with customers, has strong communication skills, and is interested in eyewear, fashion, and delivering excellent service.Greet customers and provide a welcoming shopping experience.Help customers select eyeglass frames, sung

We are partnering with a global leader in commercial HVAC solutions seeking an experienced HVAC Journeyman – Chiller Mechanic to service, maintain, troubleshoot, and repair commercial and industrial HVAC systems throughout the. HVAC Journeyman - Chiller Mechanic. Join an Industry-Leading HVAC Manu

Our client is looking for an Electrical Assembler to join the team.Wire and troubleshoot all machinery -Wire electrical equipment, cabinets and other components -Build machinery electrical systems from schematics and shop info -Drill and tap holes for mounting electrical components -Make wiring harn

Oversight of maintenance related to HVAC and mechanical systems.

Our client is looking for a Control Panel Assembler to join the team.Build panel from start to finish -Read electrical schematics -Label and mark panels, and label and assemble back plate parts -Wire panels and wire back plate and cabinet per schematics using tools like crimpers and strippers -Prepa

A leading provider of commercial HVAC services in the Lancaster area is seeking two experienced Commercial Service HVAC Technicians to join their team, delivering top-tier service to clients to clients based out of their location in York, PA. Key Responsibilities: - Perform diagnostic evaluations, r

Proactively address potential issues, providing solutions that prevent costly repairs and extend the lifespan of HVAC systems. Key Qualifications: - Experience: At least 5+ years of experience in residential HVAC service. A leading service provider is actively seeking a dedicated and knowledgeable H

Responsibilities: Loading and unloading of goods; Selecting and palletizing inventory; Auditing and repacking; Sorting and housekeeping; Duties as assigned by site leadership.

Aerotek - JobID: JP-005849839 [Material Handler / Freight Handler] As a Warehouse Associate at Aerotek, you'll: Perform all aspects of warehouse upkeep and order fulfillment; Perform lifting up to 50 lbs unassisted; Operate a manual pallet jack; Stand on your feet for up to 8 hours; Operate an RF sc

Cardinal Health - - Responsibilities: Follow SOPs to process orders; Accurate picking and packing; Operate RF scanner and input data; Use voice-pick system and material handling equipment; Maintain clean, safe workspace.

Baldor Specialty Foods - 155 Food Center Drive - Responsibilities: Select and handle product carefully; Build pallets and shrink wrap; Operate forklift and pallet jack; Receive and pick orders from order sheet; Maintain clean, safe workspace and comply with safety regulations.

PrideStaff - - Responsibilities: Sort, label, and process inbound and outbound cargo; Load and unload freight safely and efficiently; Operate forklifts, pallet jacks, and warehouse equipment; Handle basic shipping paperwork and documentation; Perform data entry in warehouse systems and maintain acc

CMA CGM Group - - Responsibilities: Develop and provide excellent customer service to internal and external customers; Execute manual labor functions such as picking inventory and loading goods; Coordinate receipt, storage, and distribution of materials; Prepare and assemble orders and move materia

OnTrac - 57-47 47th Street - Responsibilities: Unload trailers and sort packages by zip codes; Load trucks for deliveries; Be a team player; Unload trailers and sort packages by zip codes; Unload trailers and sort packages by zip codes.

FleetPride - - Responsibilities: Unload products from shipping vehicles; Deliver and unload customer orders; Operate forklift and store inventory; Maintain vehicle and warehouse cleanliness; Complete daily vehicle inspections/logs.

Home Depot - - Responsibilities: Load and unload trucks; Move material within the facility and loading platform; Operate hand trucks, forklifts, hoists, motorized conveyors; Safely operate forklifts or other machinery to complete tasks (loading, unloading, sorting, staging, transporting); General Wa

PrideStaff - - Responsibilities: Hand-pack finished product containers into designated shipping boxes according to order specifications; Inspect packaged goods for seal integrity, labeling, and visual quality; Assemble, fold, and prep cardboard shipping boxes and display cases; Stack, bundle, and o